From 748eac71fde78aa0c2e8cb3a3bab94bd994c06f5 Mon Sep 17 00:00:00 2001
From: Nitin Garg <nitin.garg@freescale.com>
Date: Tue, 27 May 2014 10:36:06 -0500
Subject: ENGR00315499-5: Support i.MX6 1.2GHz via LDO bypass

Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz,
enable LDO bypass and setup PMIC voltages. LDO bypass is dependent
on the flatten device tree file.

Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
---
 arch/arm/cpu/armv7/mx6/soc.c | 70 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

(limited to 'arch/arm/cpu/armv7')

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index c5f3b22..20ee264 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -17,6 +17,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/imx-common/boot_mode.h>
 #include <asm/imx-common/dma.h>
+#include <libfdt.h>
 #include <stdbool.h>
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
@@ -487,6 +488,75 @@ void s_init(void)
 	writel(mask528, &anatop->pfd_528_clr);
 }
 
+#ifdef CONFIG_LDO_BYPASS_CHECK
+DECLARE_GLOBAL_DATA_PTR;
+static int ldo_bypass;
+
+int check_ldo_bypass(void)
+{
+	const int *ldo_mode;
+	int node;
+
+	/* get the right fdt_blob from the global working_fdt */
+	gd->fdt_blob = working_fdt;
+	/* Get the node from FDT for anatop ldo-bypass */
+	node = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+		"fsl,imx6q-gpc");
+	if (node < 0) {
+		printf("No gpc device node %d, force to ldo-enable.\n", node);
+		return 0;
+	}
+	ldo_mode = fdt_getprop(gd->fdt_blob, node, "fsl,ldo-bypass", NULL);
+	/*
+	 * return 1 if "fsl,ldo-bypass = <1>", else return 0 if
+	 * "fsl,ldo-bypass = <0>" or no "fsl,ldo-bypass" property
+	 */
+	ldo_bypass = fdt32_to_cpu(*ldo_mode) == 1 ? 1 : 0;
+
+	return ldo_bypass;
+}
+
+int check_1_2G(void)
+{
+	u32 reg;
+	int result = 0;
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[0];
+	struct fuse_bank0_regs *fuse_bank0 =
+			(struct fuse_bank0_regs *)bank->fuse_regs;
+
+	reg = readl(&fuse_bank0->cfg3);
+	if (((reg >> 16) & 0x3) == 0x3) {
+		if (ldo_bypass) {
+			printf("Wrong dtb file used! i.MX6Q@1.2Ghz only "
+				"works with ldo-enable mode!\n");
+			/*
+			 * Currently, only imx6q-sabresd board might be here,
+			 * since only i.MX6Q support 1.2G and only Sabresd board
+			 * support ldo-bypass mode. So hardcode here.
+			 * You can also modify your board(i.MX6Q) dtb name if it
+			 * supports both ldo-bypass and ldo-enable mode.
+			 */
+			printf("Please use imx6q-sabresd-ldo.dtb!\n");
+			hang();
+		}
+		result = 1;
+	}
+
+	return result;
+}
+
+void set_anatop_bypass(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	u32 reg = readl(&anatop->reg_core);
+
+	/* bypass VDDARM/VDDSOC */
+	reg = reg | (0x1F << 18) | 0x1F;
+	writel(reg, &anatop->reg_core);
+}
+#endif
+
 #ifdef CONFIG_IMX_HDMI
 void imx_enable_hdmi_phy(void)
 {
-- 
cgit v1.1