From c704a99dff693d3e2d0fe1ad095febb89f872de9 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Fri, 14 Oct 2016 10:35:23 +0530 Subject: ARM: AMx3xx: Allow arch specific code to use early DM Early system initialization is being done before initf_dm is being called in U-Boot. Then system will fail to boot if any of the DM enabled driver is being called in this system initialization code. So, rearrange the code a bit so that DM enabled drivers can be called during early system initialization. This is inspired by commit e850ed82bce8 ("ARM: OMAP4+: Allow arch specific code to use early DM") Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini --- arch/arm/cpu/armv7/am33xx/board.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) (limited to 'arch/arm/cpu/armv7') diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 68baded..1ba4ec5 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -270,15 +270,11 @@ static void watchdog_disable(void) ; } -#ifdef CONFIG_SPL_BUILD -void board_init_f(ulong dummy) +void s_init(void) { - board_early_init_f(); - sdram_init(); } -#endif -void s_init(void) +void early_system_init(void) { /* * The ROM will only have set up sufficient pinmux to allow for the @@ -297,4 +293,22 @@ void s_init(void) rtc32k_enable(); #endif } + +#ifdef CONFIG_SPL_BUILD +void board_init_f(ulong dummy) +{ + early_system_init(); + board_early_init_f(); + sdram_init(); +} #endif + +#endif + +int arch_cpu_init_dm(void) +{ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + early_system_init(); +#endif + return 0; +} -- cgit v1.1 From b64a7cb92dcf6e0047fb524c08c90d5894ba4e39 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Fri, 14 Oct 2016 10:35:24 +0530 Subject: ARM: AMx3xx: Centralize early clock initialization This is similar to Commit 93e6253d11030 ("ARM: OMAP4/5: Centralize early clock initialization") that was done for OMAP4+, reflecting the same for AM33xx and AM43xx SoCs to centralize clock initialization. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini [trini: Add setup_early_clocks that calls setup_clocks_for_console for ti81xx] Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/am33xx/board.c | 2 +- arch/arm/cpu/armv7/am33xx/clock.c | 9 +++++++-- arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 6 ++++++ arch/arm/cpu/armv7/am33xx/clock_ti816x.c | 5 +++++ 4 files changed, 19 insertions(+), 3 deletions(-) (limited to 'arch/arm/cpu/armv7') diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 1ba4ec5..8340b54 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -286,7 +286,7 @@ void early_system_init(void) #endif watchdog_disable(); set_uart_mux_conf(); - setup_clocks_for_console(); + setup_early_clocks(); uart_soft_reset(); #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) /* Enable RTC32K clock */ diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index 9b9b78e..3d17698 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -232,10 +232,15 @@ __weak void scale_vcores(void) { } -void prcm_init() +void setup_early_clocks(void) { + setup_clocks_for_console(); enable_basic_clocks(); + timer_init(); +} + +void prcm_init(void) +{ scale_vcores(); setup_dplls(); - timer_init(); } diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c index 9b5a47b..50bd631 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c +++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c @@ -386,6 +386,12 @@ void setup_clocks_for_console(void) while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) ; } + +void setup_early_clocks(void) +{ + setup_clocks_for_console(); +} + /* * Configure the PLL/PRCM for necessary peripherals */ diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti816x.c b/arch/arm/cpu/armv7/am33xx/clock_ti816x.c index ace4a5a..079ddd7 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_ti816x.c +++ b/arch/arm/cpu/armv7/am33xx/clock_ti816x.c @@ -429,6 +429,11 @@ void setup_clocks_for_console(void) ; } +void setup_early_clocks(void) +{ + setup_clocks_for_console(); +} + void prcm_init(void) { /* Enable the control */ -- cgit v1.1 From 140d76a9ee22472bd3f8fc8066421219f45aa7c3 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Fri, 14 Oct 2016 10:35:25 +0530 Subject: board: ti: amx3xx: Remove multiple EEPROM reads Detect the board very early and avoid reading eeprom multiple times. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini --- arch/arm/cpu/armv7/am33xx/board.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm/cpu/armv7') diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 8340b54..5ebeac0 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -288,6 +288,9 @@ void early_system_init(void) set_uart_mux_conf(); setup_early_clocks(); uart_soft_reset(); +#ifdef CONFIG_TI_I2C_BOARD_DETECT + do_board_detect(); +#endif #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) /* Enable RTC32K clock */ rtc32k_enable(); -- cgit v1.1 From 983e37007da506e8145f9b3a9e1dce5c11116fb0 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Mon, 7 Nov 2016 21:34:54 -0500 Subject: arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms This moves what was in arch/arm/cpu/armv7/omap-common in to arch/arm/mach-omap2 and moves arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2 as subdirectories. All refernces to the former locations are updated to the current locations. For the logic to decide what our outputs are, consolidate the tests into a single config.mk rather than including 4. Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/Makefile | 5 - arch/arm/cpu/armv7/am33xx/Kconfig | 137 --- arch/arm/cpu/armv7/am33xx/Makefile | 22 - arch/arm/cpu/armv7/am33xx/board.c | 317 ----- arch/arm/cpu/armv7/am33xx/clk_synthesizer.c | 104 -- arch/arm/cpu/armv7/am33xx/clock.c | 246 ---- arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 234 ---- arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 231 ---- arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 410 ------ arch/arm/cpu/armv7/am33xx/clock_ti816x.c | 450 ------- arch/arm/cpu/armv7/am33xx/config.mk | 48 - arch/arm/cpu/armv7/am33xx/ddr.c | 377 ------ arch/arm/cpu/armv7/am33xx/emif4.c | 140 --- arch/arm/cpu/armv7/am33xx/mux.c | 33 - arch/arm/cpu/armv7/am33xx/sys_info.c | 176 --- arch/arm/cpu/armv7/am33xx/u-boot-spl.lds | 56 - arch/arm/cpu/armv7/omap-common/Kconfig | 17 - arch/arm/cpu/armv7/omap-common/Makefile | 40 - arch/arm/cpu/armv7/omap-common/abb.c | 121 -- arch/arm/cpu/armv7/omap-common/boot-common.c | 252 ---- arch/arm/cpu/armv7/omap-common/clocks-common.c | 892 -------------- arch/arm/cpu/armv7/omap-common/config_secure.mk | 113 -- arch/arm/cpu/armv7/omap-common/emif-common.c | 1504 ----------------------- arch/arm/cpu/armv7/omap-common/hwinit-common.c | 296 ----- arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 90 -- arch/arm/cpu/armv7/omap-common/mem-common.c | 174 --- arch/arm/cpu/armv7/omap-common/omap-cache.c | 77 -- arch/arm/cpu/armv7/omap-common/pipe3-phy.c | 231 ---- arch/arm/cpu/armv7/omap-common/pipe3-phy.h | 36 - arch/arm/cpu/armv7/omap-common/reset.c | 29 - arch/arm/cpu/armv7/omap-common/sata.c | 93 -- arch/arm/cpu/armv7/omap-common/sec-common.c | 139 --- arch/arm/cpu/armv7/omap-common/timer.c | 103 -- arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 57 - arch/arm/cpu/armv7/omap-common/utils.c | 113 -- arch/arm/cpu/armv7/omap-common/vc.c | 151 --- arch/arm/cpu/armv7/omap3/Kconfig | 154 --- arch/arm/cpu/armv7/omap3/Makefile | 21 - arch/arm/cpu/armv7/omap3/am35x_musb.c | 61 - arch/arm/cpu/armv7/omap3/board.c | 434 ------- arch/arm/cpu/armv7/omap3/boot.c | 104 -- arch/arm/cpu/armv7/omap3/clock.c | 799 ------------ arch/arm/cpu/armv7/omap3/config.mk | 15 - arch/arm/cpu/armv7/omap3/emac.c | 29 - arch/arm/cpu/armv7/omap3/emif4.c | 165 --- arch/arm/cpu/armv7/omap3/lowlevel_init.S | 476 ------- arch/arm/cpu/armv7/omap3/sdrc.c | 241 ---- arch/arm/cpu/armv7/omap3/spl_id_nand.c | 57 - arch/arm/cpu/armv7/omap3/sys_info.c | 343 ------ arch/arm/cpu/armv7/omap4/Kconfig | 65 - arch/arm/cpu/armv7/omap4/Makefile | 13 - arch/arm/cpu/armv7/omap4/boot.c | 105 -- arch/arm/cpu/armv7/omap4/config.mk | 15 - arch/arm/cpu/armv7/omap4/emif.c | 112 -- arch/arm/cpu/armv7/omap4/hw_data.c | 460 ------- arch/arm/cpu/armv7/omap4/hwinit.c | 177 --- arch/arm/cpu/armv7/omap4/prcm-regs.c | 307 ----- arch/arm/cpu/armv7/omap4/sdram_elpida.c | 324 ----- arch/arm/cpu/armv7/omap5/Kconfig | 94 -- arch/arm/cpu/armv7/omap5/Makefile | 17 - arch/arm/cpu/armv7/omap5/abb.c | 57 - arch/arm/cpu/armv7/omap5/boot.c | 46 - arch/arm/cpu/armv7/omap5/config.mk | 22 - arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c | 274 ----- arch/arm/cpu/armv7/omap5/emif.c | 88 -- arch/arm/cpu/armv7/omap5/fdt.c | 244 ---- arch/arm/cpu/armv7/omap5/hw_data.c | 776 ------------ arch/arm/cpu/armv7/omap5/hwinit.c | 453 ------- arch/arm/cpu/armv7/omap5/prcm-regs.c | 1024 --------------- arch/arm/cpu/armv7/omap5/sdram.c | 742 ----------- arch/arm/cpu/armv7/omap5/sec-fxns.c | 126 -- 71 files changed, 15954 deletions(-) delete mode 100644 arch/arm/cpu/armv7/am33xx/Kconfig delete mode 100644 arch/arm/cpu/armv7/am33xx/Makefile delete mode 100644 arch/arm/cpu/armv7/am33xx/board.c delete mode 100644 arch/arm/cpu/armv7/am33xx/clk_synthesizer.c delete mode 100644 arch/arm/cpu/armv7/am33xx/clock.c delete mode 100644 arch/arm/cpu/armv7/am33xx/clock_am33xx.c delete mode 100644 arch/arm/cpu/armv7/am33xx/clock_am43xx.c delete mode 100644 arch/arm/cpu/armv7/am33xx/clock_ti814x.c delete mode 100644 arch/arm/cpu/armv7/am33xx/clock_ti816x.c delete mode 100644 arch/arm/cpu/armv7/am33xx/config.mk delete mode 100644 arch/arm/cpu/armv7/am33xx/ddr.c delete mode 100644 arch/arm/cpu/armv7/am33xx/emif4.c delete mode 100644 arch/arm/cpu/armv7/am33xx/mux.c delete mode 100644 arch/arm/cpu/armv7/am33xx/sys_info.c delete mode 100644 arch/arm/cpu/armv7/am33xx/u-boot-spl.lds delete mode 100644 arch/arm/cpu/armv7/omap-common/Kconfig delete mode 100644 arch/arm/cpu/armv7/omap-common/Makefile delete mode 100644 arch/arm/cpu/armv7/omap-common/abb.c delete mode 100644 arch/arm/cpu/armv7/omap-common/boot-common.c delete mode 100644 arch/arm/cpu/armv7/omap-common/clocks-common.c delete mode 100644 arch/arm/cpu/armv7/omap-common/config_secure.mk delete mode 100644 arch/arm/cpu/armv7/omap-common/emif-common.c delete mode 100644 arch/arm/cpu/armv7/omap-common/hwinit-common.c delete mode 100644 arch/arm/cpu/armv7/omap-common/lowlevel_init.S delete mode 100644 arch/arm/cpu/armv7/omap-common/mem-common.c delete mode 100644 arch/arm/cpu/armv7/omap-common/omap-cache.c delete mode 100644 arch/arm/cpu/armv7/omap-common/pipe3-phy.c delete mode 100644 arch/arm/cpu/armv7/omap-common/pipe3-phy.h delete mode 100644 arch/arm/cpu/armv7/omap-common/reset.c delete mode 100644 arch/arm/cpu/armv7/omap-common/sata.c delete mode 100644 arch/arm/cpu/armv7/omap-common/sec-common.c delete mode 100644 arch/arm/cpu/armv7/omap-common/timer.c delete mode 100644 arch/arm/cpu/armv7/omap-common/u-boot-spl.lds delete mode 100644 arch/arm/cpu/armv7/omap-common/utils.c delete mode 100644 arch/arm/cpu/armv7/omap-common/vc.c delete mode 100644 arch/arm/cpu/armv7/omap3/Kconfig delete mode 100644 arch/arm/cpu/armv7/omap3/Makefile delete mode 100644 arch/arm/cpu/armv7/omap3/am35x_musb.c delete mode 100644 arch/arm/cpu/armv7/omap3/board.c delete mode 100644 arch/arm/cpu/armv7/omap3/boot.c delete mode 100644 arch/arm/cpu/armv7/omap3/clock.c delete mode 100644 arch/arm/cpu/armv7/omap3/config.mk delete mode 100644 arch/arm/cpu/armv7/omap3/emac.c delete mode 100644 arch/arm/cpu/armv7/omap3/emif4.c delete mode 100644 arch/arm/cpu/armv7/omap3/lowlevel_init.S delete mode 100644 arch/arm/cpu/armv7/omap3/sdrc.c delete mode 100644 arch/arm/cpu/armv7/omap3/spl_id_nand.c delete mode 100644 arch/arm/cpu/armv7/omap3/sys_info.c delete mode 100644 arch/arm/cpu/armv7/omap4/Kconfig delete mode 100644 arch/arm/cpu/armv7/omap4/Makefile delete mode 100644 arch/arm/cpu/armv7/omap4/boot.c delete mode 100644 arch/arm/cpu/armv7/omap4/config.mk delete mode 100644 arch/arm/cpu/armv7/omap4/emif.c delete mode 100644 arch/arm/cpu/armv7/omap4/hw_data.c delete mode 100644 arch/arm/cpu/armv7/omap4/hwinit.c delete mode 100644 arch/arm/cpu/armv7/omap4/prcm-regs.c delete mode 100644 arch/arm/cpu/armv7/omap4/sdram_elpida.c delete mode 100644 arch/arm/cpu/armv7/omap5/Kconfig delete mode 100644 arch/arm/cpu/armv7/omap5/Makefile delete mode 100644 arch/arm/cpu/armv7/omap5/abb.c delete mode 100644 arch/arm/cpu/armv7/omap5/boot.c delete mode 100644 arch/arm/cpu/armv7/omap5/config.mk delete mode 100644 arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c delete mode 100644 arch/arm/cpu/armv7/omap5/emif.c delete mode 100644 arch/arm/cpu/armv7/omap5/fdt.c delete mode 100644 arch/arm/cpu/armv7/omap5/hw_data.c delete mode 100644 arch/arm/cpu/armv7/omap5/hwinit.c delete mode 100644 arch/arm/cpu/armv7/omap5/prcm-regs.c delete mode 100644 arch/arm/cpu/armv7/omap5/sdram.c delete mode 100644 arch/arm/cpu/armv7/omap5/sec-fxns.c (limited to 'arch/arm/cpu/armv7') diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 4d3bc94..0e515a4 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -23,14 +23,12 @@ obj-$(CONFIG_ARMV7_PSCI) += psci.o psci-common.o obj-$(CONFIG_IPROC) += iproc-common/ obj-$(CONFIG_KONA) += kona-common/ -obj-$(CONFIG_OMAP_COMMON) += omap-common/ obj-$(CONFIG_SYS_ARCH_TIMER) += arch_timer.o ifneq (,$(filter s5pc1xx exynos,$(SOC))) obj-y += s5p-common/ endif -obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/ obj-$(if $(filter bcm235xx,$(SOC)),y) += bcm235xx/ obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/ obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/ @@ -39,9 +37,6 @@ obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/ obj-$(if $(filter mx5,$(SOC)),y) += mx5/ obj-$(CONFIG_MX6) += mx6/ obj-$(CONFIG_MX7) += mx7/ -obj-$(CONFIG_OMAP34XX) += omap3/ -obj-$(CONFIG_OMAP44XX) += omap4/ -obj-$(CONFIG_OMAP54XX) += omap5/ obj-$(CONFIG_RMOBILE) += rmobile/ obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ diff --git a/arch/arm/cpu/armv7/am33xx/Kconfig b/arch/arm/cpu/armv7/am33xx/Kconfig deleted file mode 100644 index 8fd32c2..0000000 --- a/arch/arm/cpu/armv7/am33xx/Kconfig +++ /dev/null @@ -1,137 +0,0 @@ -if AM33XX - -choice - prompt "AM33xx board select" - optional - -config TARGET_AM335X_EVM - bool "Support am335x_evm" - select DM - select DM_SERIAL - select DM_GPIO - select TI_I2C_BOARD_DETECT - help - This option specifies support for the AM335x - GP and HS EVM development platforms. The AM335x - GP EVM is a standalone test, development, and - evaluation module system that enables developers - to write software and develop hardware around - an AM335x processor subsystem. - -config TARGET_AM335X_BALTOS - bool "Support am335x_baltos" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_AM335X_IGEP0033 - bool "Support am335x_igep0033" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_AM335X_SHC - bool "Support am335x based shc board from bosch" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_AM335X_SL50 - bool "Support am335x_sl50" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_BAV335X - bool "Support bav335x" - select DM - select DM_SERIAL - help - The BAV335x OEM Network Processor integrates all the functions of an - embedded network computer in a small, easy to use SODIMM module which - incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8 - processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit - ethernet with simple connection to external connectors. - - For more information, visit: http://birdland.com/oem - -config TARGET_CM_T335 - bool "Support cm_t335" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_PCM051 - bool "Support pcm051" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_PENGWYN - bool "Support pengwyn" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_PEPPER - bool "Support pepper" - select DM - select DM_SERIAL - select DM_GPIO - -endchoice - -endif - -if AM43XX - -config SPL_EXT_SUPPORT - default y - -config SPL_GPIO_SUPPORT - default y - -config SPL_I2C_SUPPORT - default y - -config TARGET_AM43XX_EVM - bool "Support am43xx_evm" - select TI_I2C_BOARD_DETECT - help - This option specifies support for the AM43xx - GP and HS EVM development platforms.The AM437x - GP EVM is a standalone test, development, and - evaluation module system that enables developers - to write software and develop hardware around - an AM43xx processor subsystem. -endif - -if AM43XX || AM33XX -config ISW_ENTRY_ADDR - hex "Address in memory or XIP flash of bootloader entry point" - help - After any reset, the boot ROM on the AM43XX SOC - searches the boot media for a valid boot image. - For non-XIP devices, the ROM then copies the - image into internal memory. - For all boot modes, after the ROM processes the - boot image it eventually computes the entry - point address depending on the device type - (secure/non-secure), boot media (xip/non-xip) and - image headers. - default 0x402F4000 - -config PUB_ROM_DATA_SIZE - hex "Size in bytes of the L3 SRAM reserved by ROM to store data" - help - During the device boot, the public ROM uses the top of - the public L3 OCMC RAM to store r/w data like stack, - heap, globals etc. When the ROM is copying the boot - image from the boot media into memory, the image must - not spill over into this area. This value can be used - during compile time to determine the maximum size of a - boot image. Once the ROM transfers control to the boot - image, this area is no longer used, and can be reclaimed - for run time use by the boot image. - default 0x8400 -endif diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile deleted file mode 100644 index 6fda482..0000000 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ /dev/null @@ -1,22 +0,0 @@ -# -# Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-$(CONFIG_AM33XX) += clock_am33xx.o -obj-$(CONFIG_TI814X) += clock_ti814x.o -obj-$(CONFIG_AM43XX) += clock_am43xx.o - -ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX),) -obj-y += clock.o -endif - -obj-$(CONFIG_TI816X) += clock_ti816x.o -obj-y += sys_info.o -obj-y += ddr.o -obj-y += emif4.o -obj-y += board.o -obj-y += mux.o - -obj-$(CONFIG_CLOCK_SYNTHESIZER) += clk_synthesizer.o diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c deleted file mode 100644 index 5ebeac0..0000000 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ /dev/null @@ -1,317 +0,0 @@ -/* - * board.c - * - * Common board functions for AM33XX based boards - * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#if !CONFIG_IS_ENABLED(OF_CONTROL) -static const struct ns16550_platdata am33xx_serial[] = { - { .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, -# ifdef CONFIG_SYS_NS16550_COM2 - { .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, -# ifdef CONFIG_SYS_NS16550_COM3 - { .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, - { .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, - { .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, - { .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, -# endif -# endif -}; - -U_BOOT_DEVICES(am33xx_uarts) = { - { "ns16550_serial", &am33xx_serial[0] }, -# ifdef CONFIG_SYS_NS16550_COM2 - { "ns16550_serial", &am33xx_serial[1] }, -# ifdef CONFIG_SYS_NS16550_COM3 - { "ns16550_serial", &am33xx_serial[2] }, - { "ns16550_serial", &am33xx_serial[3] }, - { "ns16550_serial", &am33xx_serial[4] }, - { "ns16550_serial", &am33xx_serial[5] }, -# endif -# endif -}; - -#ifdef CONFIG_DM_GPIO -static const struct omap_gpio_platdata am33xx_gpio[] = { - { 0, AM33XX_GPIO0_BASE }, - { 1, AM33XX_GPIO1_BASE }, - { 2, AM33XX_GPIO2_BASE }, - { 3, AM33XX_GPIO3_BASE }, -#ifdef CONFIG_AM43XX - { 4, AM33XX_GPIO4_BASE }, - { 5, AM33XX_GPIO5_BASE }, -#endif -}; - -U_BOOT_DEVICES(am33xx_gpios) = { - { "gpio_omap", &am33xx_gpio[0] }, - { "gpio_omap", &am33xx_gpio[1] }, - { "gpio_omap", &am33xx_gpio[2] }, - { "gpio_omap", &am33xx_gpio[3] }, -#ifdef CONFIG_AM43XX - { "gpio_omap", &am33xx_gpio[4] }, - { "gpio_omap", &am33xx_gpio[5] }, -#endif -}; -#endif -#endif - -#ifndef CONFIG_DM_GPIO -static const struct gpio_bank gpio_bank_am33xx[] = { - { (void *)AM33XX_GPIO0_BASE }, - { (void *)AM33XX_GPIO1_BASE }, - { (void *)AM33XX_GPIO2_BASE }, - { (void *)AM33XX_GPIO3_BASE }, -#ifdef CONFIG_AM43XX - { (void *)AM33XX_GPIO4_BASE }, - { (void *)AM33XX_GPIO5_BASE }, -#endif -}; - -const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; -#endif - -#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) -int cpu_mmc_init(bd_t *bis) -{ - int ret; - - ret = omap_mmc_init(0, 0, 0, -1, -1); - if (ret) - return ret; - - return omap_mmc_init(1, 0, 0, -1, -1); -} -#endif - -/* AM33XX has two MUSB controllers which can be host or gadget */ -#if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \ - (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) -static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - -/* USB 2.0 PHY Control */ -#define CM_PHY_PWRDN (1 << 0) -#define CM_PHY_OTG_PWRDN (1 << 1) -#define OTGVDET_EN (1 << 19) -#define OTGSESSENDEN (1 << 20) - -static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr) -{ - if (on) { - clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN, - OTGVDET_EN | OTGSESSENDEN); - } else { - clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN); - } -} - -static struct musb_hdrc_config musb_config = { - .multipoint = 1, - .dyn_fifo = 1, - .num_eps = 16, - .ram_bits = 12, -}; - -#ifdef CONFIG_AM335X_USB0 -static void am33xx_otg0_set_phy_power(u8 on) -{ - am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0); -} - -struct omap_musb_board_data otg0_board_data = { - .set_phy_power = am33xx_otg0_set_phy_power, -}; - -static struct musb_hdrc_platform_data otg0_plat = { - .mode = CONFIG_AM335X_USB0_MODE, - .config = &musb_config, - .power = 50, - .platform_ops = &musb_dsps_ops, - .board_data = &otg0_board_data, -}; -#endif - -#ifdef CONFIG_AM335X_USB1 -static void am33xx_otg1_set_phy_power(u8 on) -{ - am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1); -} - -struct omap_musb_board_data otg1_board_data = { - .set_phy_power = am33xx_otg1_set_phy_power, -}; - -static struct musb_hdrc_platform_data otg1_plat = { - .mode = CONFIG_AM335X_USB1_MODE, - .config = &musb_config, - .power = 50, - .platform_ops = &musb_dsps_ops, - .board_data = &otg1_board_data, -}; -#endif -#endif - -int arch_misc_init(void) -{ -#ifdef CONFIG_AM335X_USB0 - musb_register(&otg0_plat, &otg0_board_data, - (void *)USB0_OTG_BASE); -#endif -#ifdef CONFIG_AM335X_USB1 - musb_register(&otg1_plat, &otg1_board_data, - (void *)USB1_OTG_BASE); -#endif - return 0; -} - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -/* - * In the case of non-SPL based booting we'll want to call these - * functions a tiny bit later as it will require gd to be set and cleared - * and that's not true in s_init in this case so we cannot do it there. - */ -int board_early_init_f(void) -{ - prcm_init(); - set_mux_conf_regs(); - - return 0; -} - -/* - * This function is the place to do per-board things such as ramp up the - * MPU clock frequency. - */ -__weak void am33xx_spl_board_init(void) -{ - do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); - do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); -} - -#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) -static void rtc32k_enable(void) -{ - struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE; - - /* - * Unlock the RTC's registers. For more details please see the - * RTC_SS section of the TRM. In order to unlock we need to - * write these specific values (keys) in this order. - */ - writel(RTC_KICK0R_WE, &rtc->kick0r); - writel(RTC_KICK1R_WE, &rtc->kick1r); - - /* Enable the RTC 32K OSC by setting bits 3 and 6. */ - writel((1 << 3) | (1 << 6), &rtc->osc); -} -#endif - -static void uart_soft_reset(void) -{ - struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; - u32 regval; - - regval = readl(&uart_base->uartsyscfg); - regval |= UART_RESET; - writel(regval, &uart_base->uartsyscfg); - while ((readl(&uart_base->uartsyssts) & - UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) - ; - - /* Disable smart idle */ - regval = readl(&uart_base->uartsyscfg); - regval |= UART_SMART_IDLE_EN; - writel(regval, &uart_base->uartsyscfg); -} - -static void watchdog_disable(void) -{ - struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; - - writel(0xAAAA, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; - writel(0x5555, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; -} - -void s_init(void) -{ -} - -void early_system_init(void) -{ - /* - * The ROM will only have set up sufficient pinmux to allow for the - * first 4KiB NOR to be read, we must finish doing what we know of - * the NOR mux in this space in order to continue. - */ -#ifdef CONFIG_NOR_BOOT - enable_norboot_pin_mux(); -#endif - watchdog_disable(); - set_uart_mux_conf(); - setup_early_clocks(); - uart_soft_reset(); -#ifdef CONFIG_TI_I2C_BOARD_DETECT - do_board_detect(); -#endif -#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) - /* Enable RTC32K clock */ - rtc32k_enable(); -#endif -} - -#ifdef CONFIG_SPL_BUILD -void board_init_f(ulong dummy) -{ - early_system_init(); - board_early_init_f(); - sdram_init(); -} -#endif - -#endif - -int arch_cpu_init_dm(void) -{ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - early_system_init(); -#endif - return 0; -} diff --git a/arch/arm/cpu/armv7/am33xx/clk_synthesizer.c b/arch/arm/cpu/armv7/am33xx/clk_synthesizer.c deleted file mode 100644 index 316e677..0000000 --- a/arch/arm/cpu/armv7/am33xx/clk_synthesizer.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * clk-synthesizer.c - * - * Clock synthesizer apis - * - * Copyright (C) 2016, Texas Instruments, Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include -#include -#include - -/** - * clk_synthesizer_reg_read - Read register from synthesizer. - * @addr: addr within the i2c device - * buf: Buffer to which value is to be read. - * - * For reading the register from this clock synthesizer, a command needs to - * be send along with enabling byte read more, and then read can happen. - * Returns 0 on success - */ -static int clk_synthesizer_reg_read(int addr, uint8_t *buf) -{ - int rc; - - /* Enable Bye read */ - addr = addr | CLK_SYNTHESIZER_BYTE_MODE; - - /* Send the command byte */ - rc = i2c_write(CLK_SYNTHESIZER_I2C_ADDR, addr, 1, buf, 1); - if (rc) - printf("Failed to send command to clock synthesizer\n"); - - /* Read the Data */ - return i2c_read(CLK_SYNTHESIZER_I2C_ADDR, addr, 1, buf, 1); -} - -/** - * clk_synthesizer_reg_write - Write a value to register in synthesizer. - * @addr: addr within the i2c device - * val: Value to be written in the addr. - * - * Enable the byte read mode in the address and start the i2c transfer. - * Returns 0 on success - */ -static int clk_synthesizer_reg_write(int addr, uint8_t val) -{ - uint8_t cmd[2]; - int rc = 0; - - /* Enable byte write */ - cmd[0] = addr | CLK_SYNTHESIZER_BYTE_MODE; - cmd[1] = val; - - rc = i2c_write(CLK_SYNTHESIZER_I2C_ADDR, addr, 1, cmd, 2); - if (rc) - printf("Clock synthesizer reg write failed at addr = 0x%x\n", - addr); - return rc; -} - -/** - * setup_clock_syntherizer - Program the clock synthesizer to get the desired - * frequency. - * @data: Data containing the desired output - * - * This is a PLL-based high performance synthesizer which gives 3 outputs - * as per the PLL_DIV and load capacitor programmed. - */ -int setup_clock_synthesizer(struct clk_synth *data) -{ - int rc; - uint8_t val; - - rc = i2c_probe(CLK_SYNTHESIZER_I2C_ADDR); - if (rc) { - printf("i2c probe failed at address 0x%x\n", - CLK_SYNTHESIZER_I2C_ADDR); - return rc; - } - - rc = clk_synthesizer_reg_read(CLK_SYNTHESIZER_ID_REG, &val); - if (val != data->id) - return rc; - - /* Crystal Load capacitor selection */ - rc = clk_synthesizer_reg_write(CLK_SYNTHESIZER_XCSEL, data->capacitor); - if (rc) - return rc; - rc = clk_synthesizer_reg_write(CLK_SYNTHESIZER_MUX_REG, data->mux); - if (rc) - return rc; - rc = clk_synthesizer_reg_write(CLK_SYNTHESIZER_PDIV2_REG, data->pdiv2); - if (rc) - return rc; - rc = clk_synthesizer_reg_write(CLK_SYNTHESIZER_PDIV3_REG, data->pdiv3); - if (rc) - return rc; - - return 0; -} diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c deleted file mode 100644 index 3d17698..0000000 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * clock.c - * - * Clock initialization for AM33XX boards. - * Derived from OMAP4 boards - * - * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include -#include -#include - -static void setup_post_dividers(const struct dpll_regs *dpll_regs, - const struct dpll_params *params) -{ - /* Setup post-dividers */ - if (params->m2 >= 0) - writel(params->m2, dpll_regs->cm_div_m2_dpll); - if (params->m3 >= 0) - writel(params->m3, dpll_regs->cm_div_m3_dpll); - if (params->m4 >= 0) - writel(params->m4, dpll_regs->cm_div_m4_dpll); - if (params->m5 >= 0) - writel(params->m5, dpll_regs->cm_div_m5_dpll); - if (params->m6 >= 0) - writel(params->m6, dpll_regs->cm_div_m6_dpll); -} - -static inline void do_lock_dpll(const struct dpll_regs *dpll_regs) -{ - clrsetbits_le32(dpll_regs->cm_clkmode_dpll, - CM_CLKMODE_DPLL_DPLL_EN_MASK, - DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); -} - -static inline void wait_for_lock(const struct dpll_regs *dpll_regs) -{ - if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, - (void *)dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("DPLL locking failed for 0x%x\n", - dpll_regs->cm_clkmode_dpll); - hang(); - } -} - -static inline void do_bypass_dpll(const struct dpll_regs *dpll_regs) -{ - clrsetbits_le32(dpll_regs->cm_clkmode_dpll, - CM_CLKMODE_DPLL_DPLL_EN_MASK, - DPLL_EN_MN_BYPASS << CM_CLKMODE_DPLL_EN_SHIFT); -} - -static inline void wait_for_bypass(const struct dpll_regs *dpll_regs) -{ - if (!wait_on_value(ST_DPLL_CLK_MASK, 0, - (void *)dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("Bypassing DPLL failed 0x%x\n", - dpll_regs->cm_clkmode_dpll); - } -} - -static void bypass_dpll(const struct dpll_regs *dpll_regs) -{ - do_bypass_dpll(dpll_regs); - wait_for_bypass(dpll_regs); -} - -void do_setup_dpll(const struct dpll_regs *dpll_regs, - const struct dpll_params *params) -{ - u32 temp; - - if (!params) - return; - - temp = readl(dpll_regs->cm_clksel_dpll); - - bypass_dpll(dpll_regs); - - /* Set M & N */ - temp &= ~CM_CLKSEL_DPLL_M_MASK; - temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK; - - temp &= ~CM_CLKSEL_DPLL_N_MASK; - temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK; - - writel(temp, dpll_regs->cm_clksel_dpll); - - setup_post_dividers(dpll_regs, params); - - /* Wait till the DPLL locks */ - do_lock_dpll(dpll_regs); - wait_for_lock(dpll_regs); -} - -static void setup_dplls(void) -{ - const struct dpll_params *params; - - params = get_dpll_core_params(); - do_setup_dpll(&dpll_core_regs, params); - - params = get_dpll_mpu_params(); - do_setup_dpll(&dpll_mpu_regs, params); - - params = get_dpll_per_params(); - do_setup_dpll(&dpll_per_regs, params); - writel(0x300, &cmwkup->clkdcoldodpllper); - - params = get_dpll_ddr_params(); - do_setup_dpll(&dpll_ddr_regs, params); -} - -static inline void wait_for_clk_enable(u32 *clkctrl_addr) -{ - u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; - u32 bound = LDELAY; - - while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) || - (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) { - clkctrl = readl(clkctrl_addr); - idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> - MODULE_CLKCTRL_IDLEST_SHIFT; - if (--bound == 0) { - printf("Clock enable failed for 0x%p idlest 0x%x\n", - clkctrl_addr, clkctrl); - return; - } - } -} - -static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode, - u32 wait_for_enable) -{ - clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, - enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT); - debug("Enable clock module - %p\n", clkctrl_addr); - if (wait_for_enable) - wait_for_clk_enable(clkctrl_addr); -} - -static inline void wait_for_clk_disable(u32 *clkctrl_addr) -{ - u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL; - u32 bound = LDELAY; - - while ((idlest != MODULE_CLKCTRL_IDLEST_DISABLED)) { - clkctrl = readl(clkctrl_addr); - idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> - MODULE_CLKCTRL_IDLEST_SHIFT; - if (--bound == 0) { - printf("Clock disable failed for 0x%p idlest 0x%x\n", - clkctrl_addr, clkctrl); - return; - } - } -} -static inline void disable_clock_module(u32 *const clkctrl_addr, - u32 wait_for_disable) -{ - clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_DISABLE << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - debug("Disable clock module - %p\n", clkctrl_addr); - if (wait_for_disable) - wait_for_clk_disable(clkctrl_addr); -} - -static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode) -{ - clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, - enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT); - debug("Enable clock domain - %p\n", clkctrl_reg); -} - -static inline void disable_clock_domain(u32 *const clkctrl_reg) -{ - clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, - CD_CLKCTRL_CLKTRCTRL_SW_SLEEP << - CD_CLKCTRL_CLKTRCTRL_SHIFT); - debug("Disable clock domain - %p\n", clkctrl_reg); -} - -void do_enable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_explicit_en, u8 wait_for_enable) -{ - u32 i, max = 100; - - /* Put the clock domains in SW_WKUP mode */ - for (i = 0; (i < max) && clk_domains[i]; i++) { - enable_clock_domain(clk_domains[i], - CD_CLKCTRL_CLKTRCTRL_SW_WKUP); - } - - /* Clock modules that need to be put in SW_EXPLICIT_EN mode */ - for (i = 0; (i < max) && clk_modules_explicit_en[i]; i++) { - enable_clock_module(clk_modules_explicit_en[i], - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN, - wait_for_enable); - }; -} - -void do_disable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_disable, - u8 wait_for_disable) -{ - u32 i, max = 100; - - - /* Clock modules that need to be put in SW_DISABLE */ - for (i = 0; (i < max) && clk_modules_disable[i]; i++) - disable_clock_module(clk_modules_disable[i], - wait_for_disable); - - /* Put the clock domains in SW_SLEEP mode */ - for (i = 0; (i < max) && clk_domains[i]; i++) - disable_clock_domain(clk_domains[i]); -} - -/* - * Before scaling up the clocks we need to have the PMIC scale up the - * voltages first. This will be dependent on which PMIC is in use - * and in some cases we may not be scaling things up at all and thus not - * need to do anything here. - */ -__weak void scale_vcores(void) -{ -} - -void setup_early_clocks(void) -{ - setup_clocks_for_console(); - enable_basic_clocks(); - timer_init(); -} - -void prcm_init(void) -{ - scale_vcores(); - setup_dplls(); -} diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c deleted file mode 100644 index 7b841b2..0000000 --- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c +++ /dev/null @@ -1,234 +0,0 @@ -/* - * clock_am33xx.c - * - * clocks for AM33XX based boards - * - * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -#define OSC (V_OSCK/1000000) - -struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER; -struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP; -struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL; -struct cm_rtc *const cmrtc = (struct cm_rtc *)CM_RTC; - -const struct dpll_regs dpll_mpu_regs = { - .cm_clkmode_dpll = CM_WKUP + 0x88, - .cm_idlest_dpll = CM_WKUP + 0x20, - .cm_clksel_dpll = CM_WKUP + 0x2C, - .cm_div_m2_dpll = CM_WKUP + 0xA8, -}; - -const struct dpll_regs dpll_core_regs = { - .cm_clkmode_dpll = CM_WKUP + 0x90, - .cm_idlest_dpll = CM_WKUP + 0x5C, - .cm_clksel_dpll = CM_WKUP + 0x68, - .cm_div_m4_dpll = CM_WKUP + 0x80, - .cm_div_m5_dpll = CM_WKUP + 0x84, - .cm_div_m6_dpll = CM_WKUP + 0xD8, -}; - -const struct dpll_regs dpll_per_regs = { - .cm_clkmode_dpll = CM_WKUP + 0x8C, - .cm_idlest_dpll = CM_WKUP + 0x70, - .cm_clksel_dpll = CM_WKUP + 0x9C, - .cm_div_m2_dpll = CM_WKUP + 0xAC, -}; - -const struct dpll_regs dpll_ddr_regs = { - .cm_clkmode_dpll = CM_WKUP + 0x94, - .cm_idlest_dpll = CM_WKUP + 0x34, - .cm_clksel_dpll = CM_WKUP + 0x40, - .cm_div_m2_dpll = CM_WKUP + 0xA0, -}; - -struct dpll_params dpll_mpu_opp100 = { - CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1}; -const struct dpll_params dpll_core_opp100 = { - 1000, OSC-1, -1, -1, 10, 8, 4}; -const struct dpll_params dpll_mpu = { - MPUPLL_M_300, OSC-1, 1, -1, -1, -1, -1}; -const struct dpll_params dpll_core = { - 50, OSC-1, -1, -1, 1, 1, 1}; -const struct dpll_params dpll_per = { - 960, OSC-1, 5, -1, -1, -1, -1}; - -const struct dpll_params *get_dpll_mpu_params(void) -{ - return &dpll_mpu; -} - -const struct dpll_params *get_dpll_core_params(void) -{ - return &dpll_core; -} - -const struct dpll_params *get_dpll_per_params(void) -{ - return &dpll_per; -} - -void setup_clocks_for_console(void) -{ - clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, - CD_CLKCTRL_CLKTRCTRL_SW_WKUP << - CD_CLKCTRL_CLKTRCTRL_SHIFT); - - clrsetbits_le32(&cmper->l4hsclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, - CD_CLKCTRL_CLKTRCTRL_SW_WKUP << - CD_CLKCTRL_CLKTRCTRL_SHIFT); - - clrsetbits_le32(&cmwkup->wkup_uart0ctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&cmper->uart1clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&cmper->uart2clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&cmper->uart3clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&cmper->uart4clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&cmper->uart5clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); -} - -void enable_basic_clocks(void) -{ - u32 *const clk_domains[] = { - &cmper->l3clkstctrl, - &cmper->l4fwclkstctrl, - &cmper->l3sclkstctrl, - &cmper->l4lsclkstctrl, - &cmwkup->wkclkstctrl, - &cmper->emiffwclkctrl, - &cmrtc->clkstctrl, - 0 - }; - - u32 *const clk_modules_explicit_en[] = { - &cmper->l3clkctrl, - &cmper->l4lsclkctrl, - &cmper->l4fwclkctrl, - &cmwkup->wkl4wkclkctrl, - &cmper->l3instrclkctrl, - &cmper->l4hsclkctrl, - &cmwkup->wkgpio0clkctrl, - &cmwkup->wkctrlclkctrl, - &cmper->timer2clkctrl, - &cmper->gpmcclkctrl, - &cmper->elmclkctrl, - &cmper->mmc0clkctrl, - &cmper->mmc1clkctrl, - &cmwkup->wkup_i2c0ctrl, - &cmper->gpio1clkctrl, - &cmper->gpio2clkctrl, - &cmper->gpio3clkctrl, - &cmper->i2c1clkctrl, - &cmper->cpgmac0clkctrl, - &cmper->spi0clkctrl, - &cmrtc->rtcclkctrl, - &cmper->usb0clkctrl, - &cmper->emiffwclkctrl, - &cmper->emifclkctrl, - 0 - }; - - do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); - - /* Select the Master osc 24 MHZ as Timer2 clock source */ - writel(0x1, &cmdpll->clktimer2clk); -} - -/* - * Enable Spread Spectrum for the MPU by calculating the required - * values and setting the registers accordingly. - * @param permille The spreading in permille (10th of a percent) - */ -void set_mpu_spreadspectrum(int permille) -{ - u32 multiplier_m; - u32 predivider_n; - u32 cm_clksel_dpll_mpu; - u32 cm_clkmode_dpll_mpu; - u32 ref_clock; - u32 pll_bandwidth; - u32 mod_freq_divider; - u32 exponent; - u32 mantissa; - u32 delta_m_step; - - printf("Enabling Spread Spectrum of %d permille for MPU\n", - permille); - - /* Read PLL parameter m and n */ - cm_clksel_dpll_mpu = readl(&cmwkup->clkseldpllmpu); - multiplier_m = (cm_clksel_dpll_mpu >> 8) & 0x3FF; - predivider_n = cm_clksel_dpll_mpu & 0x7F; - - /* - * Calculate reference clock (clock after pre-divider), - * its max. PLL bandwidth, - * and resulting mod_freq_divider - */ - ref_clock = V_OSCK / (predivider_n + 1); - pll_bandwidth = ref_clock / 70; - mod_freq_divider = ref_clock / (4 * pll_bandwidth); - - /* Calculate Mantissa/Exponent */ - exponent = 0; - mantissa = mod_freq_divider; - while ((mantissa > 127) && (exponent < 7)) { - exponent++; - mantissa /= 2; - } - if (mantissa > 127) - mantissa = 127; - - mod_freq_divider = mantissa << exponent; - - /* - * Calculate Modulation steps - * As we use Downspread only, the spread is twice the value of - * permille, so Div2! - * As it takes the value in percent, divide by ten! - */ - delta_m_step = ((u32)((multiplier_m * permille) / 10 / 2)) << 18; - delta_m_step /= 100; - delta_m_step /= mod_freq_divider; - if (delta_m_step > 0xFFFFF) - delta_m_step = 0xFFFFF; - - /* Setup Spread Spectrum */ - writel(delta_m_step, &cmwkup->sscdeltamstepdllmpu); - writel((exponent << 8) | mantissa, &cmwkup->sscmodfreqdivdpllmpu); - cm_clkmode_dpll_mpu = readl(&cmwkup->clkmoddpllmpu); - /* clear all SSC flags */ - cm_clkmode_dpll_mpu &= ~(0xF << CM_CLKMODE_DPLL_SSC_EN_SHIFT); - /* enable SSC with Downspread only */ - cm_clkmode_dpll_mpu |= CM_CLKMODE_DPLL_SSC_EN_MASK | - CM_CLKMODE_DPLL_SSC_DOWNSPREAD_MASK; - writel(cm_clkmode_dpll_mpu, &cmwkup->clkmoddpllmpu); - while (!(readl(&cmwkup->clkmoddpllmpu) & 0x2000)) - ; -} diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c deleted file mode 100644 index 73ea955..0000000 --- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * clock_am43xx.c - * - * clocks for AM43XX based boards - * Derived from AM33XX based boards - * - * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER; -struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP; -struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL; - -const struct dpll_regs dpll_mpu_regs = { - .cm_clkmode_dpll = CM_WKUP + 0x560, - .cm_idlest_dpll = CM_WKUP + 0x564, - .cm_clksel_dpll = CM_WKUP + 0x56c, - .cm_div_m2_dpll = CM_WKUP + 0x570, -}; - -const struct dpll_regs dpll_core_regs = { - .cm_clkmode_dpll = CM_WKUP + 0x520, - .cm_idlest_dpll = CM_WKUP + 0x524, - .cm_clksel_dpll = CM_WKUP + 0x52C, - .cm_div_m4_dpll = CM_WKUP + 0x538, - .cm_div_m5_dpll = CM_WKUP + 0x53C, - .cm_div_m6_dpll = CM_WKUP + 0x540, -}; - -const struct dpll_regs dpll_per_regs = { - .cm_clkmode_dpll = CM_WKUP + 0x5E0, - .cm_idlest_dpll = CM_WKUP + 0x5E4, - .cm_clksel_dpll = CM_WKUP + 0x5EC, - .cm_div_m2_dpll = CM_WKUP + 0x5F0, -}; - -const struct dpll_regs dpll_ddr_regs = { - .cm_clkmode_dpll = CM_WKUP + 0x5A0, - .cm_idlest_dpll = CM_WKUP + 0x5A4, - .cm_clksel_dpll = CM_WKUP + 0x5AC, - .cm_div_m2_dpll = CM_WKUP + 0x5B0, - .cm_div_m4_dpll = CM_WKUP + 0x5B8, -}; - -void setup_clocks_for_console(void) -{ - u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; - - /* Do not add any spl_debug prints in this function */ - clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, - CD_CLKCTRL_CLKTRCTRL_SW_WKUP << - CD_CLKCTRL_CLKTRCTRL_SHIFT); - - /* Enable UART0 */ - clrsetbits_le32(&cmwkup->wkup_uart0ctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - - while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) || - (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) { - clkctrl = readl(&cmwkup->wkup_uart0ctrl); - idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> - MODULE_CLKCTRL_IDLEST_SHIFT; - } -} - -void enable_basic_clocks(void) -{ - u32 *const clk_domains[] = { - &cmper->l3clkstctrl, - &cmper->l3sclkstctrl, - &cmper->l4lsclkstctrl, - &cmwkup->wkclkstctrl, - &cmper->emifclkstctrl, - 0 - }; - - u32 *const clk_modules_explicit_en[] = { - &cmper->l3clkctrl, - &cmper->l4lsclkctrl, - &cmper->l4fwclkctrl, - &cmwkup->wkl4wkclkctrl, - &cmper->l3instrclkctrl, - &cmper->l4hsclkctrl, - &cmwkup->wkgpio0clkctrl, - &cmwkup->wkctrlclkctrl, - &cmper->timer2clkctrl, - &cmper->gpmcclkctrl, - &cmper->elmclkctrl, - &cmper->mmc0clkctrl, - &cmper->mmc1clkctrl, - &cmwkup->wkup_i2c0ctrl, - &cmper->gpio1clkctrl, - &cmper->gpio2clkctrl, - &cmper->gpio3clkctrl, - &cmper->gpio4clkctrl, - &cmper->gpio5clkctrl, - &cmper->i2c1clkctrl, - &cmper->cpgmac0clkctrl, - &cmper->emiffwclkctrl, - &cmper->emifclkctrl, - &cmper->otfaemifclkctrl, - &cmper->qspiclkctrl, - &cmper->spi0clkctrl, - 0 - }; - - do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); - - /* Select the Master osc clk as Timer2 clock source */ - writel(0x1, &cmdpll->clktimer2clk); - - /* For OPP100 the mac clock should be /5. */ - writel(0x4, &cmdpll->clkselmacclk); -} - -#ifdef CONFIG_TI_EDMA3 -void enable_edma3_clocks(void) -{ - u32 *const clk_domains_edma3[] = { - 0 - }; - - u32 *const clk_modules_explicit_en_edma3[] = { - &cmper->tpccclkctrl, - &cmper->tptc0clkctrl, - 0 - }; - - do_enable_clocks(clk_domains_edma3, - clk_modules_explicit_en_edma3, - 1); -} - -void disable_edma3_clocks(void) -{ - u32 *const clk_domains_edma3[] = { - 0 - }; - - u32 *const clk_modules_disable_edma3[] = { - &cmper->tpccclkctrl, - &cmper->tptc0clkctrl, - 0 - }; - - do_disable_clocks(clk_domains_edma3, - clk_modules_disable_edma3, - 1); -} -#endif - -#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) -void enable_usb_clocks(int index) -{ - u32 *usbclkctrl = 0; - u32 *usbphyocp2scpclkctrl = 0; - - if (index == 0) { - usbclkctrl = &cmper->usb0clkctrl; - usbphyocp2scpclkctrl = &cmper->usbphyocp2scp0clkctrl; - setbits_le32(&cmper->usb0clkctrl, - USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960); - setbits_le32(&cmwkup->usbphy0clkctrl, - USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K); - } else if (index == 1) { - usbclkctrl = &cmper->usb1clkctrl; - usbphyocp2scpclkctrl = &cmper->usbphyocp2scp1clkctrl; - setbits_le32(&cmper->usb1clkctrl, - USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960); - setbits_le32(&cmwkup->usbphy1clkctrl, - USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K); - } - - u32 *const clk_domains_usb[] = { - 0 - }; - - u32 *const clk_modules_explicit_en_usb[] = { - usbclkctrl, - usbphyocp2scpclkctrl, - 0 - }; - - do_enable_clocks(clk_domains_usb, clk_modules_explicit_en_usb, 1); -} - -void disable_usb_clocks(int index) -{ - u32 *usbclkctrl = 0; - u32 *usbphyocp2scpclkctrl = 0; - - if (index == 0) { - usbclkctrl = &cmper->usb0clkctrl; - usbphyocp2scpclkctrl = &cmper->usbphyocp2scp0clkctrl; - clrbits_le32(&cmper->usb0clkctrl, - USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960); - clrbits_le32(&cmwkup->usbphy0clkctrl, - USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K); - } else if (index == 1) { - usbclkctrl = &cmper->usb1clkctrl; - usbphyocp2scpclkctrl = &cmper->usbphyocp2scp1clkctrl; - clrbits_le32(&cmper->usb1clkctrl, - USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960); - clrbits_le32(&cmwkup->usbphy1clkctrl, - USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K); - } - - u32 *const clk_domains_usb[] = { - 0 - }; - - u32 *const clk_modules_disable_usb[] = { - usbclkctrl, - usbphyocp2scpclkctrl, - 0 - }; - - do_disable_clocks(clk_domains_usb, clk_modules_disable_usb, 1); -} -#endif diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c deleted file mode 100644 index 50bd631..0000000 --- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * clock_ti814x.c - * - * Clocks for TI814X based boards - * - * Copyright (C) 2013, Texas Instruments, Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -/* PRCM */ -#define PRCM_MOD_EN 0x2 - -/* CLK_SRC */ -#define OSC_SRC0 0 -#define OSC_SRC1 1 - -#define L3_OSC_SRC OSC_SRC0 - -#define OSC_0_FREQ 20 - -#define DCO_HS2_MIN 500 -#define DCO_HS2_MAX 1000 -#define DCO_HS1_MIN 1000 -#define DCO_HS1_MAX 2000 - -#define SELFREQDCO_HS2 0x00000801 -#define SELFREQDCO_HS1 0x00001001 - -#define MPU_N 0x1 -#define MPU_M 0x3C -#define MPU_M2 1 -#define MPU_CLKCTRL 0x1 - -#define L3_N 19 -#define L3_M 880 -#define L3_M2 4 -#define L3_CLKCTRL 0x801 - -#define DDR_N 19 -#define DDR_M 666 -#define DDR_M2 2 -#define DDR_CLKCTRL 0x801 - -/* ADPLLJ register values */ -#define ADPLLJ_CLKCTRL_HS2 0x00000801 /* HS2 mode, TINT2 = 1 */ -#define ADPLLJ_CLKCTRL_HS1 0x00001001 /* HS1 mode, TINT2 = 1 */ -#define ADPLLJ_CLKCTRL_CLKDCOLDOEN (1 << 29) -#define ADPLLJ_CLKCTRL_IDLE (1 << 23) -#define ADPLLJ_CLKCTRL_CLKOUTEN (1 << 20) -#define ADPLLJ_CLKCTRL_CLKOUTLDOEN (1 << 19) -#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ (1 << 17) -#define ADPLLJ_CLKCTRL_LPMODE (1 << 12) -#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN (1 << 11) -#define ADPLLJ_CLKCTRL_REGM4XEN (1 << 10) -#define ADPLLJ_CLKCTRL_TINITZ (1 << 0) -#define ADPLLJ_CLKCTRL_CLKDCO (ADPLLJ_CLKCTRL_CLKDCOLDOEN | \ - ADPLLJ_CLKCTRL_CLKOUTEN | \ - ADPLLJ_CLKCTRL_CLKOUTLDOEN | \ - ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ) - -#define ADPLLJ_STATUS_PHASELOCK (1 << 10) -#define ADPLLJ_STATUS_FREQLOCK (1 << 9) -#define ADPLLJ_STATUS_PHSFRQLOCK (ADPLLJ_STATUS_PHASELOCK | \ - ADPLLJ_STATUS_FREQLOCK) -#define ADPLLJ_STATUS_BYPASSACK (1 << 8) -#define ADPLLJ_STATUS_BYPASS (1 << 0) -#define ADPLLJ_STATUS_BYPASSANDACK (ADPLLJ_STATUS_BYPASSACK | \ - ADPLLJ_STATUS_BYPASS) - -#define ADPLLJ_TENABLE_ENB (1 << 0) -#define ADPLLJ_TENABLEDIV_ENB (1 << 0) - -#define ADPLLJ_M2NDIV_M2SHIFT 16 - -#define MPU_PLL_BASE (PLL_SUBSYS_BASE + 0x048) -#define L3_PLL_BASE (PLL_SUBSYS_BASE + 0x110) -#define DDR_PLL_BASE (PLL_SUBSYS_BASE + 0x290) - -struct ad_pll { - unsigned int pwrctrl; - unsigned int clkctrl; - unsigned int tenable; - unsigned int tenablediv; - unsigned int m2ndiv; - unsigned int mn2div; - unsigned int fracdiv; - unsigned int bwctrl; - unsigned int fracctrl; - unsigned int status; - unsigned int m3div; - unsigned int rampctrl; -}; - -#define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0) - -#define ENET_CLKCTRL_CMPL 0x30000 - -#define SATA_PLL_BASE (CTRL_BASE + 0x0720) - -struct sata_pll { - unsigned int pllcfg0; - unsigned int pllcfg1; - unsigned int pllcfg2; - unsigned int pllcfg3; - unsigned int pllcfg4; - unsigned int pllstatus; - unsigned int rxstatus; - unsigned int txstatus; - unsigned int testcfg; -}; - -#define SEL_IN_FREQ (0x1 << 31) -#define DIGCLRZ (0x1 << 30) -#define ENDIGLDO (0x1 << 4) -#define APLL_CP_CURR (0x1 << 3) -#define ENBGSC_REF (0x1 << 2) -#define ENPLLLDO (0x1 << 1) -#define ENPLL (0x1 << 0) - -#define SATA_PLLCFG0_1 (SEL_IN_FREQ | ENBGSC_REF) -#define SATA_PLLCFG0_2 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF) -#define SATA_PLLCFG0_3 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF | ENPLLLDO) -#define SATA_PLLCFG0_4 (SEL_IN_FREQ | DIGCLRZ | ENDIGLDO | ENBGSC_REF | \ - ENPLLLDO | ENPLL) - -#define PLL_LOCK (0x1 << 0) - -#define ENSATAMODE (0x1 << 31) -#define PLLREFSEL (0x1 << 30) -#define MDIVINT (0x4b << 18) -#define EN_CLKAUX (0x1 << 5) -#define EN_CLK125M (0x1 << 4) -#define EN_CLK100M (0x1 << 3) -#define EN_CLK50M (0x1 << 2) - -#define SATA_PLLCFG1 (ENSATAMODE | \ - PLLREFSEL | \ - MDIVINT | \ - EN_CLKAUX | \ - EN_CLK125M | \ - EN_CLK100M | \ - EN_CLK50M) - -#define DIGLDO_EN_CAPLESSMODE (0x1 << 22) -#define PLLDO_EN_LDO_STABLE (0x1 << 11) -#define PLLDO_EN_BUF_CUR (0x1 << 7) -#define PLLDO_EN_LP (0x1 << 6) -#define PLLDO_CTRL_TRIM_1_4V (0x10 << 1) - -#define SATA_PLLCFG3 (DIGLDO_EN_CAPLESSMODE | \ - PLLDO_EN_LDO_STABLE | \ - PLLDO_EN_BUF_CUR | \ - PLLDO_EN_LP | \ - PLLDO_CTRL_TRIM_1_4V) - -const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; -const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; -const struct sata_pll *spll = (struct sata_pll *)SATA_PLL_BASE; - -/* - * Enable the peripheral clock for required peripherals - */ -static void enable_per_clocks(void) -{ - /* HSMMC1 */ - writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl); - while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN) - ; - - /* Ethernet */ - writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl); - writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl); - while ((readl(&cmalwon->ethernet0clkctrl) & ENET_CLKCTRL_CMPL) != 0) - ; - writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl); - while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0) - ; - - /* RTC clocks */ - writel(PRCM_MOD_EN, &cmalwon->rtcclkstctrl); - writel(PRCM_MOD_EN, &cmalwon->rtcclkctrl); - while (readl(&cmalwon->rtcclkctrl) != PRCM_MOD_EN) - ; -} - -/* - * select the HS1 or HS2 for DCO Freq - * return : CLKCTRL - */ -static u32 pll_dco_freq_sel(u32 clkout_dco) -{ - if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX) - return SELFREQDCO_HS2; - else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX) - return SELFREQDCO_HS1; - else - return -1; -} - -/* - * select the sigma delta config - * return: sigma delta val - */ -static u32 pll_sigma_delta_val(u32 clkout_dco) -{ - u32 sig_val = 0; - - sig_val = (clkout_dco + 225) / 250; - sig_val = sig_val << 24; - - return sig_val; -} - -/* - * configure individual ADPLLJ - */ -static void pll_config(u32 base, u32 n, u32 m, u32 m2, - u32 clkctrl_val, int adpllj) -{ - const struct ad_pll *adpll = (struct ad_pll *)base; - u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0; - u32 sig_val = 0, hs_mod = 0; - - m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n; - mn2val = m; - - /* calculate clkout_dco */ - clkout_dco = ((OSC_0_FREQ / (n+1)) * m); - - /* sigma delta & Hs mode selection skip for ADPLLS*/ - if (adpllj) { - sig_val = pll_sigma_delta_val(clkout_dco); - hs_mod = pll_dco_freq_sel(clkout_dco); - } - - /* by-pass pll */ - read_clkctrl = readl(&adpll->clkctrl); - writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl); - while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK) - != ADPLLJ_STATUS_BYPASSANDACK) - ; - - /* clear TINITZ */ - read_clkctrl = readl(&adpll->clkctrl); - writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); - - /* - * ref_clk = 20/(n + 1); - * clkout_dco = ref_clk * m; - * clk_out = clkout_dco/m2; - */ - read_clkctrl = readl(&adpll->clkctrl) & - ~(ADPLLJ_CLKCTRL_LPMODE | - ADPLLJ_CLKCTRL_DRIFTGUARDIAN | - ADPLLJ_CLKCTRL_REGM4XEN); - writel(m2nval, &adpll->m2ndiv); - writel(mn2val, &adpll->mn2div); - - /* Skip for modena(ADPLLS) */ - if (adpllj) { - writel(sig_val, &adpll->fracdiv); - writel((read_clkctrl | hs_mod), &adpll->clkctrl); - } - - /* Load M2, N2 dividers of ADPLL */ - writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); - writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); - - /* Load M, N dividers of ADPLL */ - writel(ADPLLJ_TENABLE_ENB, &adpll->tenable); - writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable); - - /* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */ - read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO; - if (adpllj) - writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO), - &adpll->clkctrl); - - /* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */ - read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE; - writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); - - /* Wait for phase and freq lock */ - while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) != - ADPLLJ_STATUS_PHSFRQLOCK) - ; -} - -static void unlock_pll_control_mmr(void) -{ - /* TRM 2.10.1.4 and 3.2.7-3.2.11 */ - writel(0x1EDA4C3D, 0x481C5040); - writel(0x2FF1AC2B, 0x48140060); - writel(0xF757FDC0, 0x48140064); - writel(0xE2BC3A6D, 0x48140068); - writel(0x1EBF131D, 0x4814006c); - writel(0x6F361E05, 0x48140070); -} - -static void mpu_pll_config(void) -{ - pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0); -} - -static void l3_pll_config(void) -{ - u32 l3_osc_src, rd_osc_src = 0; - - l3_osc_src = L3_OSC_SRC; - rd_osc_src = readl(OSC_SRC_CTRL); - - if (OSC_SRC0 == l3_osc_src) - writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL); - else - writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL); - - pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1); -} - -void ddr_pll_config(unsigned int ddrpll_m) -{ - pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1); -} - -void sata_pll_config(void) -{ - /* - * This sequence for configuring the SATA PLL - * resident in the control module is documented - * in TI8148 TRM section 21.3.1 - */ - writel(SATA_PLLCFG1, &spll->pllcfg1); - udelay(50); - - writel(SATA_PLLCFG3, &spll->pllcfg3); - udelay(50); - - writel(SATA_PLLCFG0_1, &spll->pllcfg0); - udelay(50); - - writel(SATA_PLLCFG0_2, &spll->pllcfg0); - udelay(50); - - writel(SATA_PLLCFG0_3, &spll->pllcfg0); - udelay(50); - - writel(SATA_PLLCFG0_4, &spll->pllcfg0); - udelay(50); - - while (((readl(&spll->pllstatus) & PLL_LOCK) == 0)) - ; -} - -void enable_dmm_clocks(void) -{ - writel(PRCM_MOD_EN, &cmdef->fwclkctrl); - writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl); - writel(PRCM_MOD_EN, &cmdef->emif0clkctrl); - while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmdef->emif1clkctrl); - while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN) - ; - while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300) - ; - writel(PRCM_MOD_EN, &cmdef->dmmclkctrl); - while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl); - while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100) - ; -} - -void setup_clocks_for_console(void) -{ - unlock_pll_control_mmr(); - /* UART0 */ - writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); - while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) - ; -} - -void setup_early_clocks(void) -{ - setup_clocks_for_console(); -} - -/* - * Configure the PLL/PRCM for necessary peripherals - */ -void prcm_init(void) -{ - /* Enable the control module */ - writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); - - /* Configure PLLs */ - mpu_pll_config(); - l3_pll_config(); - sata_pll_config(); - - /* Enable the required peripherals */ - enable_per_clocks(); -} diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti816x.c b/arch/arm/cpu/armv7/am33xx/clock_ti816x.c deleted file mode 100644 index 079ddd7..0000000 --- a/arch/arm/cpu/armv7/am33xx/clock_ti816x.c +++ /dev/null @@ -1,450 +0,0 @@ -/* - * clock_ti816x.c - * - * Clocks for TI816X based boards - * - * Copyright (C) 2013, Adeneo Embedded - * Antoine Tenart, - * - * Based on TI-PSP-04.00.02.14 : - * - * Copyright (C) 2009, Texas Instruments, Incorporated - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include - -#include - -#define CM_PLL_BASE (CTRL_BASE + 0x0400) - -/* Main PLL */ -#define MAIN_N 64 -#define MAIN_P 0x1 -#define MAIN_INTFREQ1 0x8 -#define MAIN_FRACFREQ1 0x800000 -#define MAIN_MDIV1 0x2 -#define MAIN_INTFREQ2 0xE -#define MAIN_FRACFREQ2 0x0 -#define MAIN_MDIV2 0x1 -#define MAIN_INTFREQ3 0x8 -#define MAIN_FRACFREQ3 0xAAAAB0 -#define MAIN_MDIV3 0x3 -#define MAIN_INTFREQ4 0x9 -#define MAIN_FRACFREQ4 0x55554F -#define MAIN_MDIV4 0x3 -#define MAIN_INTFREQ5 0x9 -#define MAIN_FRACFREQ5 0x374BC6 -#define MAIN_MDIV5 0xC -#define MAIN_MDIV6 0x48 -#define MAIN_MDIV7 0x4 - -/* DDR PLL */ -#if defined(CONFIG_TI816X_DDR_PLL_400) /* 400 MHz */ -#define DDR_N 59 -#define DDR_P 0x1 -#define DDR_MDIV1 0x4 -#define DDR_INTFREQ2 0x8 -#define DDR_FRACFREQ2 0xD99999 -#define DDR_MDIV2 0x1E -#define DDR_INTFREQ3 0x8 -#define DDR_FRACFREQ3 0x0 -#define DDR_MDIV3 0x4 -#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ4 0x0 -#define DDR_MDIV4 0x4 -#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ5 0x0 -#define DDR_MDIV5 0x4 -#elif defined(CONFIG_TI816X_DDR_PLL_531) /* 531 MHz */ -#define DDR_N 59 -#define DDR_P 0x1 -#define DDR_MDIV1 0x3 -#define DDR_INTFREQ2 0x8 -#define DDR_FRACFREQ2 0xD99999 -#define DDR_MDIV2 0x1E -#define DDR_INTFREQ3 0x8 -#define DDR_FRACFREQ3 0x0 -#define DDR_MDIV3 0x4 -#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ4 0x0 -#define DDR_MDIV4 0x4 -#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ5 0x0 -#define DDR_MDIV5 0x4 -#elif defined(CONFIG_TI816X_DDR_PLL_675) /* 675 MHz */ -#define DDR_N 50 -#define DDR_P 0x1 -#define DDR_MDIV1 0x2 -#define DDR_INTFREQ2 0x9 -#define DDR_FRACFREQ2 0x0 -#define DDR_MDIV2 0x19 -#define DDR_INTFREQ3 0x13 -#define DDR_FRACFREQ3 0x800000 -#define DDR_MDIV3 0x2 -#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ4 0x0 -#define DDR_MDIV4 0x4 -#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ5 0x0 -#define DDR_MDIV5 0x4 -#elif defined(CONFIG_TI816X_DDR_PLL_796) /* 796 MHz */ -#define DDR_N 59 -#define DDR_P 0x1 -#define DDR_MDIV1 0x2 -#define DDR_INTFREQ2 0x8 -#define DDR_FRACFREQ2 0xD99999 -#define DDR_MDIV2 0x1E -#define DDR_INTFREQ3 0x8 -#define DDR_FRACFREQ3 0x0 -#define DDR_MDIV3 0x4 -#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ4 0x0 -#define DDR_MDIV4 0x4 -#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ5 0x0 -#define DDR_MDIV5 0x4 -#endif - -#define CONTROL_STATUS (CTRL_BASE + 0x40) -#define DDR_RCD (CTRL_BASE + 0x070C) -#define CM_TIMER1_CLKSEL (PRCM_BASE + 0x390) -#define DMM_PAT_BASE_ADDR (DMM_BASE + 0x420) -#define CM_ALWON_CUST_EFUSE_CLKCTRL (PRCM_BASE + 0x1628) - -#define INTCPS_SYSCONFIG 0x48200010 -#define CM_SYSCLK10_CLKSEL 0x48180324 - -struct cm_pll { - unsigned int mainpll_ctrl; /* offset 0x400 */ - unsigned int mainpll_pwd; - unsigned int mainpll_freq1; - unsigned int mainpll_div1; - unsigned int mainpll_freq2; - unsigned int mainpll_div2; - unsigned int mainpll_freq3; - unsigned int mainpll_div3; - unsigned int mainpll_freq4; - unsigned int mainpll_div4; - unsigned int mainpll_freq5; - unsigned int mainpll_div5; - unsigned int resv0[1]; - unsigned int mainpll_div6; - unsigned int resv1[1]; - unsigned int mainpll_div7; - unsigned int ddrpll_ctrl; /* offset 0x440 */ - unsigned int ddrpll_pwd; - unsigned int resv2[1]; - unsigned int ddrpll_div1; - unsigned int ddrpll_freq2; - unsigned int ddrpll_div2; - unsigned int ddrpll_freq3; - unsigned int ddrpll_div3; - unsigned int ddrpll_freq4; - unsigned int ddrpll_div4; - unsigned int ddrpll_freq5; - unsigned int ddrpll_div5; - unsigned int videopll_ctrl; /* offset 0x470 */ - unsigned int videopll_pwd; - unsigned int videopll_freq1; - unsigned int videopll_div1; - unsigned int videopll_freq2; - unsigned int videopll_div2; - unsigned int videopll_freq3; - unsigned int videopll_div3; - unsigned int resv3[4]; - unsigned int audiopll_ctrl; /* offset 0x4A0 */ - unsigned int audiopll_pwd; - unsigned int resv4[2]; - unsigned int audiopll_freq2; - unsigned int audiopll_div2; - unsigned int audiopll_freq3; - unsigned int audiopll_div3; - unsigned int audiopll_freq4; - unsigned int audiopll_div4; - unsigned int audiopll_freq5; - unsigned int audiopll_div5; -}; - -const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; -const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; -const struct cm_pll *cmpll = (struct cm_pll *)CM_PLL_BASE; -const struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; - -void enable_dmm_clocks(void) -{ - writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl); - writel(PRCM_MOD_EN, &cmdef->emif0clkctrl); - writel(PRCM_MOD_EN, &cmdef->emif1clkctrl); - - /* Wait for clocks to be active */ - while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300) - ; - /* Wait for emif0 to be fully functional, including OCP */ - while (((readl(&cmdef->emif0clkctrl) >> 17) & 0x3) != 0) - ; - /* Wait for emif1 to be fully functional, including OCP */ - while (((readl(&cmdef->emif1clkctrl) >> 17) & 0x3) != 0) - ; - - writel(PRCM_MOD_EN, &cmdef->dmmclkctrl); - /* Wait for dmm to be fully functional, including OCP */ - while (((readl(&cmdef->dmmclkctrl) >> 17) & 0x3) != 0) - ; - - /* Enable Tiled Access */ - writel(0x80000000, DMM_PAT_BASE_ADDR); -} - -/* assume delay is aprox at least 1us */ -static void ddr_delay(int d) -{ - int i; - - /* - * read a control register. - * this is a bit more delay and cannot be optimized by the compiler - * assuming one read takes 200 cycles and A8 is runing 1 GHz - * somewhat conservative setting - */ - for (i = 0; i < 50*d; i++) - readl(CONTROL_STATUS); -} - -static void main_pll_init_ti816x(void) -{ - u32 main_pll_ctrl = 0; - - /* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFFFFFFFB; - main_pll_ctrl |= BIT(2); - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); - - /* Enable PLL by setting BIT3 in its ctrl reg */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFFFFFFF7; - main_pll_ctrl |= BIT(3); - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); - - /* Write the values of N,P in the CTRL reg */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFF; - main_pll_ctrl |= (MAIN_N<<16 | MAIN_P<<8); - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); - - /* Power up clock1-7 */ - writel(0x0, &cmpll->mainpll_pwd); - - /* Program the freq and divider values for clock1-7 */ - writel((1<<31 | 1<<28 | (MAIN_INTFREQ1<<24) | MAIN_FRACFREQ1), - &cmpll->mainpll_freq1); - writel(((1<<8) | MAIN_MDIV1), &cmpll->mainpll_div1); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ2<<24) | MAIN_FRACFREQ2), - &cmpll->mainpll_freq2); - writel(((1<<8) | MAIN_MDIV2), &cmpll->mainpll_div2); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ3<<24) | MAIN_FRACFREQ3), - &cmpll->mainpll_freq3); - writel(((1<<8) | MAIN_MDIV3), &cmpll->mainpll_div3); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ4<<24) | MAIN_FRACFREQ4), - &cmpll->mainpll_freq4); - writel(((1<<8) | MAIN_MDIV4), &cmpll->mainpll_div4); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ5<<24) | MAIN_FRACFREQ5), - &cmpll->mainpll_freq5); - writel(((1<<8) | MAIN_MDIV5), &cmpll->mainpll_div5); - - writel((1<<8 | MAIN_MDIV6), &cmpll->mainpll_div6); - - writel((1<<8 | MAIN_MDIV7), &cmpll->mainpll_div7); - - /* Wait for PLL to lock */ - while ((readl(&cmpll->mainpll_ctrl) & BIT(7)) != BIT(7)) - ; - - /* Put the PLL in normal mode, disable bypass */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFFFFFFFB; - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); -} - -static void ddr_pll_bypass_ti816x(void) -{ - u32 ddr_pll_ctrl = 0; - - /* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */ - ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); - ddr_pll_ctrl &= 0xFFFFFFFB; - ddr_pll_ctrl |= BIT(2); - writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); -} - -static void ddr_pll_init_ti816x(void) -{ - u32 ddr_pll_ctrl = 0; - /* Enable PLL by setting BIT3 in its ctrl reg */ - ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); - ddr_pll_ctrl &= 0xFFFFFFF7; - ddr_pll_ctrl |= BIT(3); - writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); - - /* Write the values of N,P in the CTRL reg */ - ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); - ddr_pll_ctrl &= 0xFF; - ddr_pll_ctrl |= (DDR_N<<16 | DDR_P<<8); - writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); - - ddr_delay(10); - - /* Power up clock1-5 */ - writel(0x0, &cmpll->ddrpll_pwd); - - /* Program the freq and divider values for clock1-3 */ - writel(((0<<8) | DDR_MDIV1), &cmpll->ddrpll_div1); - ddr_delay(1); - writel(((1<<8) | DDR_MDIV1), &cmpll->ddrpll_div1); - writel((1<<31 | 1<<28 | (DDR_INTFREQ2<<24) | DDR_FRACFREQ2), - &cmpll->ddrpll_freq2); - writel(((1<<8) | DDR_MDIV2), &cmpll->ddrpll_div2); - writel(((0<<8) | DDR_MDIV3), &cmpll->ddrpll_div3); - ddr_delay(1); - writel(((1<<8) | DDR_MDIV3), &cmpll->ddrpll_div3); - ddr_delay(1); - writel((0<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3), - &cmpll->ddrpll_freq3); - ddr_delay(1); - writel((1<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3), - &cmpll->ddrpll_freq3); - - ddr_delay(5); - - /* Wait for PLL to lock */ - while ((readl(&cmpll->ddrpll_ctrl) & BIT(7)) != BIT(7)) - ; - - /* Power up RCD */ - writel(BIT(0), DDR_RCD); -} - -static void peripheral_enable(void) -{ - /* Wake-up the l3_slow clock */ - writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl); - - /* - * Note on Timers: - * There are 8 timers(0-7) out of which timer 0 is a secure timer. - * Timer 0 mux should not be changed - * - * To access the timer registers we need the to be - * enabled which is what we do in the first step - */ - - /* Enable timer1 */ - writel(PRCM_MOD_EN, &cmalwon->timer1clkctrl); - /* Select timer1 clock to be CLKIN (27MHz) */ - writel(BIT(1), CM_TIMER1_CLKSEL); - - /* Wait for timer1 to be ON-ACTIVE */ - while (((readl(&cmalwon->l3slowclkstctrl) - & (0x80000<<1))>>20) != 1) - ; - /* Wait for timer1 to be enabled */ - while (((readl(&cmalwon->timer1clkctrl) & 0x30000)>>16) != 0) - ; - /* Active posted mode */ - writel(PRCM_MOD_EN, (DM_TIMER1_BASE + 0x54)); - while (readl(DM_TIMER1_BASE + 0x10) & BIT(0)) - ; - /* Start timer1 */ - writel(BIT(0), (DM_TIMER1_BASE + 0x38)); - - /* eFuse */ - writel(PRCM_MOD_EN, CM_ALWON_CUST_EFUSE_CLKCTRL); - while (readl(CM_ALWON_CUST_EFUSE_CLKCTRL) != PRCM_MOD_EN) - ; - - /* Enable gpio0 */ - writel(PRCM_MOD_EN, &cmalwon->gpio0clkctrl); - while (readl(&cmalwon->gpio0clkctrl) != PRCM_MOD_EN) - ; - writel((BIT(8)), &cmalwon->gpio0clkctrl); - - /* Enable spi */ - writel(PRCM_MOD_EN, &cmalwon->spiclkctrl); - while (readl(&cmalwon->spiclkctrl) != PRCM_MOD_EN) - ; - - /* Enable i2c0 */ - writel(PRCM_MOD_EN, &cmalwon->i2c0clkctrl); - while (readl(&cmalwon->i2c0clkctrl) != PRCM_MOD_EN) - ; - - /* Enable ethernet0 */ - writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl); - writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl); - writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl); - - /* Enable hsmmc */ - writel(PRCM_MOD_EN, &cmalwon->sdioclkctrl); - while (readl(&cmalwon->sdioclkctrl) != PRCM_MOD_EN) - ; -} - -void setup_clocks_for_console(void) -{ - /* Fix ROM code bug - from TI-PSP-04.00.02.14 */ - writel(0x0, CM_SYSCLK10_CLKSEL); - - ddr_pll_bypass_ti816x(); - - /* Enable uart0-2 */ - writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); - while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmalwon->uart1clkctrl); - while (readl(&cmalwon->uart1clkctrl) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmalwon->uart2clkctrl); - while (readl(&cmalwon->uart2clkctrl) != PRCM_MOD_EN) - ; - while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100) - ; -} - -void setup_early_clocks(void) -{ - setup_clocks_for_console(); -} - -void prcm_init(void) -{ - /* Enable the control */ - writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); - - main_pll_init_ti816x(); - ddr_pll_init_ti816x(); - - /* - * With clk freqs setup to desired values, - * enable the required peripherals - */ - peripheral_enable(); -} diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk deleted file mode 100644 index 87b76d9..0000000 --- a/arch/arm/cpu/armv7/am33xx/config.mk +++ /dev/null @@ -1,48 +0,0 @@ -# -# Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(srctree)/$(CPUDIR)/omap-common/config_secure.mk - -ifdef CONFIG_SPL_BUILD -ifeq ($(CONFIG_TI_SECURE_DEVICE),y) -# -# For booting from SPI use -# u-boot-spl_HS_SPI_X-LOADER to program flash -# -# On AM43XX: -# -# For booting spl from all other media use -# u-boot-spl_HS_ISSW -# -# On AM33XX: -# -# For booting spl from NAND flash use -# u-boot-spl_HS_X-LOADER -# -# For booting spl from SD/MMC/eMMC media use -# u-boot-spl_HS_MLO -# -# For booting spl over UART, USB, or Ethernet use -# u-boot-spl_HS_2ND -# -# Refer to README.ti-secure for more info -# -ALL-y += u-boot-spl_HS_ISSW -ALL-y += u-boot-spl_HS_SPI_X-LOADER -ALL-y += u-boot-spl_HS_X-LOADER -ALL-y += u-boot-spl_HS_MLO -ALL-y += u-boot-spl_HS_2ND -else -ALL-y += MLO -ALL-y += MLO.byteswap -endif -else -ifeq ($(CONFIG_TI_SECURE_DEVICE),y) -ALL-$(CONFIG_QSPI_BOOT) += u-boot_HS_XIP_X-LOADER -ALL-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img -endif -ALL-y += u-boot.img -endif diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c deleted file mode 100644 index 6acf30c..0000000 --- a/arch/arm/cpu/armv7/am33xx/ddr.c +++ /dev/null @@ -1,377 +0,0 @@ -/* - * DDR Configuration for AM33xx devices. - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -/** - * Base address for EMIF instances - */ -static struct emif_reg_struct *emif_reg[2] = { - (struct emif_reg_struct *)EMIF4_0_CFG_BASE, - (struct emif_reg_struct *)EMIF4_1_CFG_BASE}; - -/** - * Base addresses for DDR PHY cmd/data regs - */ -static struct ddr_cmd_regs *ddr_cmd_reg[2] = { - (struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR, - (struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR2}; - -static struct ddr_data_regs *ddr_data_reg[2] = { - (struct ddr_data_regs *)DDR_PHY_DATA_ADDR, - (struct ddr_data_regs *)DDR_PHY_DATA_ADDR2}; - -/** - * Base address for ddr io control instances - */ -static struct ddr_cmdtctrl *ioctrl_reg = { - (struct ddr_cmdtctrl *)DDR_CONTROL_BASE_ADDR}; - -static inline u32 get_mr(int nr, u32 cs, u32 mr_addr) -{ - u32 mr; - - mr_addr |= cs << EMIF_REG_CS_SHIFT; - writel(mr_addr, &emif_reg[nr]->emif_lpddr2_mode_reg_cfg); - - mr = readl(&emif_reg[nr]->emif_lpddr2_mode_reg_data); - debug("get_mr: EMIF1 cs %d mr %08x val 0x%x\n", cs, mr_addr, mr); - if (((mr & 0x0000ff00) >> 8) == (mr & 0xff) && - ((mr & 0x00ff0000) >> 16) == (mr & 0xff) && - ((mr & 0xff000000) >> 24) == (mr & 0xff)) - return mr & 0xff; - else - return mr; -} - -static inline void set_mr(int nr, u32 cs, u32 mr_addr, u32 mr_val) -{ - mr_addr |= cs << EMIF_REG_CS_SHIFT; - writel(mr_addr, &emif_reg[nr]->emif_lpddr2_mode_reg_cfg); - writel(mr_val, &emif_reg[nr]->emif_lpddr2_mode_reg_data); -} - -static void configure_mr(int nr, u32 cs) -{ - u32 mr_addr; - - while (get_mr(nr, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK) - ; - set_mr(nr, cs, LPDDR2_MR10, 0x56); - - set_mr(nr, cs, LPDDR2_MR1, 0x43); - set_mr(nr, cs, LPDDR2_MR2, 0x2); - - mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK; - set_mr(nr, cs, mr_addr, 0x2); -} - -/* - * Configure EMIF4D5 registers and MR registers For details about these magic - * values please see the EMIF registers section of the TRM. - */ -void config_sdram_emif4d5(const struct emif_regs *regs, int nr) -{ - writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl); - writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw); - writel(regs->zq_config, &emif_reg[nr]->emif_zq_config); - - writel(regs->temp_alert_config, &emif_reg[nr]->emif_temp_alert_config); - writel(regs->emif_rd_wr_lvl_rmp_win, - &emif_reg[nr]->emif_rd_wr_lvl_rmp_win); - writel(regs->emif_rd_wr_lvl_rmp_ctl, - &emif_reg[nr]->emif_rd_wr_lvl_rmp_ctl); - writel(regs->emif_rd_wr_lvl_ctl, &emif_reg[nr]->emif_rd_wr_lvl_ctl); - writel(regs->emif_rd_wr_exec_thresh, - &emif_reg[nr]->emif_rd_wr_exec_thresh); - - /* - * for most SOCs these registers won't need to be changed so only - * write to these registers if someone explicitly has set the - * register's value. - */ - if(regs->emif_cos_config) { - writel(regs->emif_prio_class_serv_map, &emif_reg[nr]->emif_prio_class_serv_map); - writel(regs->emif_connect_id_serv_1_map, &emif_reg[nr]->emif_connect_id_serv_1_map); - writel(regs->emif_connect_id_serv_2_map, &emif_reg[nr]->emif_connect_id_serv_2_map); - writel(regs->emif_cos_config, &emif_reg[nr]->emif_cos_config); - } - - /* - * Sequence to ensure that the PHY is in a known state prior to - * startting hardware leveling. Also acts as to latch some state from - * the EMIF into the PHY. - */ - writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc); - writel(0x2411, &emif_reg[nr]->emif_iodft_tlgc); - writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc); - - clrbits_le32(&emif_reg[nr]->emif_sdram_ref_ctrl, - EMIF_REG_INITREF_DIS_MASK); - - writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config); - writel(regs->sdram_config, &cstat->secure_emif_sdram_config); - - /* Wait 1ms because of L3 timeout error */ - udelay(1000); - - writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); - writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw); - - /* Perform hardware leveling for DDR3 */ - if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3) { - writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36) | - 0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36); - writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw) | - 0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw); - - writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_rmp_ctl); - - /* Enable read leveling */ - writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_ctl); - - /* - * Enable full read and write leveling. Wait for read and write - * leveling bit to clear RDWRLVLFULL_START bit 31 - */ - while ((readl(&emif_reg[nr]->emif_rd_wr_lvl_ctl) & 0x80000000) - != 0) - ; - - /* Check the timeout register to see if leveling is complete */ - if ((readl(&emif_reg[nr]->emif_status) & 0x70) != 0) - puts("DDR3 H/W leveling incomplete with errors\n"); - - } else { - /* DDR2 */ - configure_mr(nr, 0); - configure_mr(nr, 1); - } -} - -/** - * Configure SDRAM - */ -void config_sdram(const struct emif_regs *regs, int nr) -{ - if (regs->zq_config) { - writel(regs->zq_config, &emif_reg[nr]->emif_zq_config); - writel(regs->sdram_config, &cstat->secure_emif_sdram_config); - writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config); - - /* Trigger initialization */ - writel(0x00003100, &emif_reg[nr]->emif_sdram_ref_ctrl); - /* Wait 1ms because of L3 timeout error */ - udelay(1000); - - /* Write proper sdram_ref_cref_ctrl value */ - writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); - writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw); - } - writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); - writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw); - writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config); -} - -/** - * Set SDRAM timings - */ -void set_sdram_timings(const struct emif_regs *regs, int nr) -{ - writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1); - writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1_shdw); - writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2); - writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2_shdw); - writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3); - writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3_shdw); -} - -/* - * Configure EXT PHY registers for software leveling - */ -static void ext_phy_settings_swlvl(const struct emif_regs *regs, int nr) -{ - u32 *ext_phy_ctrl_base = 0; - u32 *emif_ext_phy_ctrl_base = 0; - __maybe_unused const u32 *ext_phy_ctrl_const_regs; - u32 i = 0; - __maybe_unused u32 size; - - ext_phy_ctrl_base = (u32 *)&(regs->emif_ddr_ext_phy_ctrl_1); - emif_ext_phy_ctrl_base = - (u32 *)&(emif_reg[nr]->emif_ddr_ext_phy_ctrl_1); - - /* Configure external phy control timing registers */ - for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) { - writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++); - /* Update shadow registers */ - writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++); - } - -#ifdef CONFIG_AM43XX - /* - * External phy 6-24 registers do not change with ddr frequency. - * These only need to be set on DDR2 on AM43xx. - */ - emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs, &size); - - if (!size) - return; - - for (i = 0; i < size; i++) { - writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++); - /* Update shadow registers */ - writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++); - } -#endif -} - -/* - * Configure EXT PHY registers for hardware leveling - */ -static void ext_phy_settings_hwlvl(const struct emif_regs *regs, int nr) -{ - /* - * Enable hardware leveling on the EMIF. For details about these - * magic values please see the EMIF registers section of the TRM. - */ - writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1); - writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22_shdw); - writel(0x00600020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_23); - writel(0x00600020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_23_shdw); - writel(0x40010080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_24); - writel(0x40010080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_24_shdw); - writel(0x08102040, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_25); - writel(0x08102040, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_25_shdw); - writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_26); - writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_26_shdw); - writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_27); - writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_27_shdw); - writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_28); - writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_28_shdw); - writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_29); - writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_29_shdw); - writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_30); - writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_30_shdw); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_31); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_31_shdw); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_32); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_32_shdw); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_33); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_33_shdw); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_34); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_34_shdw); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_35); - writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_35_shdw); - writel(0x000000FF, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36); - writel(0x000000FF, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw); - - /* - * Sequence to ensure that the PHY is again in a known state after - * hardware leveling. - */ - writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc); - writel(0x2411, &emif_reg[nr]->emif_iodft_tlgc); - writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc); -} - -/** - * Configure DDR PHY - */ -void config_ddr_phy(const struct emif_regs *regs, int nr) -{ - /* - * Disable initialization and refreshes for now until we finish - * programming EMIF regs and set time between rising edge of - * DDR_RESET to rising edge of DDR_CKE to > 500us per memory spec. - * We currently hardcode a value based on a max expected frequency - * of 400MHz. - */ - writel(EMIF_REG_INITREF_DIS_MASK | 0x3100, - &emif_reg[nr]->emif_sdram_ref_ctrl); - - writel(regs->emif_ddr_phy_ctlr_1, - &emif_reg[nr]->emif_ddr_phy_ctrl_1); - writel(regs->emif_ddr_phy_ctlr_1, - &emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw); - - if (get_emif_rev((u32)emif_reg[nr]) == EMIF_4D5) { - if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3) - ext_phy_settings_hwlvl(regs, nr); - else - ext_phy_settings_swlvl(regs, nr); - } -} - -/** - * Configure DDR CMD control registers - */ -void config_cmd_ctrl(const struct cmd_control *cmd, int nr) -{ - if (!cmd) - return; - - writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio); - writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout); - - writel(cmd->cmd1csratio, &ddr_cmd_reg[nr]->cm1csratio); - writel(cmd->cmd1iclkout, &ddr_cmd_reg[nr]->cm1iclkout); - - writel(cmd->cmd2csratio, &ddr_cmd_reg[nr]->cm2csratio); - writel(cmd->cmd2iclkout, &ddr_cmd_reg[nr]->cm2iclkout); -} - -/** - * Configure DDR DATA registers - */ -void config_ddr_data(const struct ddr_data *data, int nr) -{ - int i; - - if (!data) - return; - - for (i = 0; i < DDR_DATA_REGS_NR; i++) { - writel(data->datardsratio0, - &(ddr_data_reg[nr]+i)->dt0rdsratio0); - writel(data->datawdsratio0, - &(ddr_data_reg[nr]+i)->dt0wdsratio0); - writel(data->datawiratio0, - &(ddr_data_reg[nr]+i)->dt0wiratio0); - writel(data->datagiratio0, - &(ddr_data_reg[nr]+i)->dt0giratio0); - writel(data->datafwsratio0, - &(ddr_data_reg[nr]+i)->dt0fwsratio0); - writel(data->datawrsratio0, - &(ddr_data_reg[nr]+i)->dt0wrsratio0); - } -} - -void config_io_ctrl(const struct ctrl_ioregs *ioregs) -{ - if (!ioregs) - return; - - writel(ioregs->cm0ioctl, &ioctrl_reg->cm0ioctl); - writel(ioregs->cm1ioctl, &ioctrl_reg->cm1ioctl); - writel(ioregs->cm2ioctl, &ioctrl_reg->cm2ioctl); - writel(ioregs->dt0ioctl, &ioctrl_reg->dt0ioctl); - writel(ioregs->dt1ioctl, &ioctrl_reg->dt1ioctl); -#ifdef CONFIG_AM43XX - writel(ioregs->dt2ioctrl, &ioctrl_reg->dt2ioctrl); - writel(ioregs->dt3ioctrl, &ioctrl_reg->dt3ioctrl); - writel(ioregs->emif_sdram_config_ext, - &ioctrl_reg->emif_sdram_config_ext); -#endif -} diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c deleted file mode 100644 index 27fa3fb..0000000 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * emif4.c - * - * AM33XX emif4 configuration file - * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - sdram_init(); -#endif - - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size( - (void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_MAX_RAM_BANK_SIZE); - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = gd->ram_size; -} - - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#ifdef CONFIG_TI81XX -static struct dmm_lisa_map_regs *hw_lisa_map_regs = - (struct dmm_lisa_map_regs *)DMM_BASE; -#endif -#ifndef CONFIG_TI816X -static struct vtp_reg *vtpreg[2] = { - (struct vtp_reg *)VTP0_CTRL_ADDR, - (struct vtp_reg *)VTP1_CTRL_ADDR}; -#endif -#ifdef CONFIG_AM33XX -static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; -#endif -#ifdef CONFIG_AM43XX -static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; -static struct cm_device_inst *cm_device = - (struct cm_device_inst *)CM_DEVICE_INST; -#endif - -#ifdef CONFIG_TI81XX -void config_dmm(const struct dmm_lisa_map_regs *regs) -{ - enable_dmm_clocks(); - - writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); - - writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); -} -#endif - -#ifndef CONFIG_TI816X -static void config_vtp(int nr) -{ - writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE, - &vtpreg[nr]->vtp0ctrlreg); - writel(readl(&vtpreg[nr]->vtp0ctrlreg) & (~VTP_CTRL_START_EN), - &vtpreg[nr]->vtp0ctrlreg); - writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_START_EN, - &vtpreg[nr]->vtp0ctrlreg); - - /* Poll for READY */ - while ((readl(&vtpreg[nr]->vtp0ctrlreg) & VTP_CTRL_READY) != - VTP_CTRL_READY) - ; -} -#endif - -void __weak ddr_pll_config(unsigned int ddrpll_m) -{ -} - -void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs, - const struct ddr_data *data, const struct cmd_control *ctrl, - const struct emif_regs *regs, int nr) -{ - ddr_pll_config(pll); -#ifndef CONFIG_TI816X - config_vtp(nr); -#endif - config_cmd_ctrl(ctrl, nr); - - config_ddr_data(data, nr); -#ifdef CONFIG_AM33XX - config_io_ctrl(ioregs); - - /* Set CKE to be controlled by EMIF/DDR PHY */ - writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl); - -#endif -#ifdef CONFIG_AM43XX - writel(readl(&cm_device->cm_dll_ctrl) & ~0x1, &cm_device->cm_dll_ctrl); - while ((readl(&cm_device->cm_dll_ctrl) & CM_DLL_READYST) == 0) - ; - - config_io_ctrl(ioregs); - - /* Set CKE to be controlled by EMIF/DDR PHY */ - writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl); - - if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3) - /* Allow EMIF to control DDR_RESET */ - writel(0x00000000, &ddrctrl->ddrioctrl); -#endif - - /* Program EMIF instance */ - config_ddr_phy(regs, nr); - set_sdram_timings(regs, nr); - if (get_emif_rev(EMIF1_BASE) == EMIF_4D5) - config_sdram_emif4d5(regs, nr); - else - config_sdram(regs, nr); -} -#endif diff --git a/arch/arm/cpu/armv7/am33xx/mux.c b/arch/arm/cpu/armv7/am33xx/mux.c deleted file mode 100644 index 2ded472..0000000 --- a/arch/arm/cpu/armv7/am33xx/mux.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * mux.c - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include - -/* - * Configure the pin mux for the module - */ -void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux) -{ - int i; - - if (!mod_pin_mux) - return; - - for (i = 0; mod_pin_mux[i].reg_offset != -1; i++) - MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset); -} diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c deleted file mode 100644 index f0f72fa..0000000 --- a/arch/arm/cpu/armv7/am33xx/sys_info.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * sys_info.c - * - * System information functions - * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ - * - * Derived from Beagle Board and 3430 SDP code by - * Richard Woodruff - * Syed Mohammed Khasim - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include - -struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE; - -/** - * get_cpu_rev(void) - extract rev info - */ -u32 get_cpu_rev(void) -{ - u32 id; - u32 rev; - - id = readl(DEVICE_ID); - rev = (id >> 28) & 0xff; - - return rev; -} - -/** - * get_cpu_type(void) - extract cpu info - */ -u32 get_cpu_type(void) -{ - u32 id = 0; - u32 partnum; - - id = readl(DEVICE_ID); - partnum = (id >> 12) & 0xffff; - - return partnum; -} - -/** - * get_device_type(): tell if GP/HS/EMU/TST - */ -u32 get_device_type(void) -{ - int mode; - mode = readl(&cstat->statusreg) & (DEVICE_MASK); - return mode >>= 8; -} - -/** - * get_sysboot_value(void) - return SYS_BOOT[4:0] - */ -u32 get_sysboot_value(void) -{ - return readl(&cstat->statusreg) & SYSBOOT_MASK; -} - -#ifdef CONFIG_DISPLAY_CPUINFO -static char *cpu_revs[] = { - "1.0", - "2.0", - "2.1"}; - - -static char *dev_types[] = { - "TST", - "EMU", - "HS", - "GP"}; - -/** - * Print CPU information - */ -int print_cpuinfo(void) -{ - char *cpu_s, *sec_s, *rev_s; - - switch (get_cpu_type()) { - case AM335X: - cpu_s = "AM335X"; - break; - case TI81XX: - cpu_s = "TI81XX"; - break; - case AM437X: - cpu_s = "AM437X"; - break; - default: - cpu_s = "Unknown CPU type"; - break; - } - - if (get_cpu_rev() < ARRAY_SIZE(cpu_revs)) - rev_s = cpu_revs[get_cpu_rev()]; - else - rev_s = "?"; - - if (get_device_type() < ARRAY_SIZE(dev_types)) - sec_s = dev_types[get_device_type()]; - else - sec_s = "?"; - - printf("CPU : %s-%s rev %s\n", cpu_s, sec_s, rev_s); - - return 0; -} -#endif /* CONFIG_DISPLAY_CPUINFO */ - -#ifdef CONFIG_AM33XX -int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev) -{ - int sil_rev; - - sil_rev = readl(&cdev->deviceid) >> 28; - - if (sil_rev == 1) - /* PG 2.0, efuse may not be set. */ - return MPUPLL_M_800; - else if (sil_rev >= 2) { - /* Check what the efuse says our max speed is. */ - int efuse_arm_mpu_max_freq; - efuse_arm_mpu_max_freq = readl(&cdev->efuse_sma); - switch ((efuse_arm_mpu_max_freq & DEVICE_ID_MASK)) { - case AM335X_ZCZ_1000: - return MPUPLL_M_1000; - case AM335X_ZCZ_800: - return MPUPLL_M_800; - case AM335X_ZCZ_720: - return MPUPLL_M_720; - case AM335X_ZCZ_600: - case AM335X_ZCE_600: - return MPUPLL_M_600; - case AM335X_ZCZ_300: - case AM335X_ZCE_300: - return MPUPLL_M_300; - } - } - - /* PG 1.0 or otherwise unknown, use the PG1.0 max */ - return MPUPLL_M_720; -} - -int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency) -{ - /* For PG2.1 and later, we have one set of values. */ - if (sil_rev >= 2) { - switch (frequency) { - case MPUPLL_M_1000: - return TPS65910_OP_REG_SEL_1_3_2_5; - case MPUPLL_M_800: - return TPS65910_OP_REG_SEL_1_2_6; - case MPUPLL_M_720: - return TPS65910_OP_REG_SEL_1_2_0; - case MPUPLL_M_600: - case MPUPLL_M_300: - return TPS65910_OP_REG_SEL_1_1_3; - } - } - - /* Default to PG1.0/PG2.0 values. */ - return TPS65910_OP_REG_SEL_1_1_3; -} -#endif diff --git a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds deleted file mode 100644 index 07cf267..0000000 --- a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds +++ /dev/null @@ -1,56 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * (C) Copyright 2010 - * Texas Instruments, - * Aneesh V - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ - LENGTH = CONFIG_SPL_MAX_SIZE } -MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ - LENGTH = CONFIG_SPL_BSS_MAX_SIZE } - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - .text : - { - __start = .; - *(.vectors) - arch/arm/cpu/armv7/start.o (.text) - *(.text*) - } >.sram - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram - - . = ALIGN(4); - .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram - - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } >.sram - - . = ALIGN(4); - __image_copy_end = .; - - .end : - { - *(.__end) - } >.sram - - .bss : - { - . = ALIGN(4); - __bss_start = .; - *(.bss*) - . = ALIGN(4); - __bss_end = .; - } >.sdram -} diff --git a/arch/arm/cpu/armv7/omap-common/Kconfig b/arch/arm/cpu/armv7/omap-common/Kconfig deleted file mode 100644 index 4daccd9..0000000 --- a/arch/arm/cpu/armv7/omap-common/Kconfig +++ /dev/null @@ -1,17 +0,0 @@ -config TI_SECURE_DEVICE - bool "HS Device Type Support" - depends on OMAP54XX || AM43XX || AM33XX - help - If a high secure (HS) device type is being used, this config - must be set. This option impacts various aspects of the - build system (to create signed boot images that can be - authenticated) and the code. See the doc/README.ti-secure - file for further details. - -source "arch/arm/cpu/armv7/omap3/Kconfig" - -source "arch/arm/cpu/armv7/omap4/Kconfig" - -source "arch/arm/cpu/armv7/omap5/Kconfig" - -source "arch/arm/cpu/armv7/am33xx/Kconfig" diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile deleted file mode 100644 index 3172bae..0000000 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ /dev/null @@ -1,40 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := reset.o -ifeq ($(CONFIG_TIMER),) -obj-y += timer.o -else -ifdef CONFIG_SPL_BUILD -obj-y += timer.o -endif -endif -obj-y += utils.o - -ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) -obj-y += hwinit-common.o -obj-y += clocks-common.o -obj-y += emif-common.o -obj-y += vc.o -obj-y += abb.o -endif - -ifneq ($(CONFIG_OMAP54XX),) -obj-y += pipe3-phy.o -obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o -endif - -ifeq ($(CONFIG_SYS_DCACHE_OFF),) -obj-y += omap-cache.o -endif - -obj-y += boot-common.o -obj-y += lowlevel_init.o - -obj-y += mem-common.o - -obj-$(CONFIG_TI_SECURE_DEVICE) += sec-common.o diff --git a/arch/arm/cpu/armv7/omap-common/abb.c b/arch/arm/cpu/armv7/omap-common/abb.c deleted file mode 100644 index a0add66..0000000 --- a/arch/arm/cpu/armv7/omap-common/abb.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Adaptive Body Bias programming sequence for OMAP family - * - * (C) Copyright 2013 - * Texas Instruments, - * - * Andrii Tseglytskyi - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -__weak s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) -{ - return -1; -} - -static void abb_setup_timings(u32 setup) -{ - u32 sys_rate, sr2_cnt, clk_cycles; - - /* - * SR2_WTCNT_VALUE is the settling time for the ABB ldo after a - * transition and must be programmed with the correct time at boot. - * The value programmed into the register is the number of SYS_CLK - * clock cycles that match a given wall time profiled for the ldo. - * This value depends on: - * settling time of ldo in micro-seconds (varies per OMAP family), - * of clock cycles per SYS_CLK period (varies per OMAP family), - * the SYS_CLK frequency in MHz (varies per board) - * The formula is: - * - * ldo settling time (in micro-seconds) - * SR2_WTCNT_VALUE = ------------------------------------------ - * (# system clock cycles) * (sys_clk period) - * - * Put another way: - * - * SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate)) - * - * To avoid dividing by zero multiply both "# clock cycles" and - * "settling time" by 10 such that the final result is the one we want. - */ - - /* calculate SR2_WTCNT_VALUE */ - sys_rate = DIV_ROUND_CLOSEST(V_OSCK, 1000000); - clk_cycles = DIV_ROUND_CLOSEST(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate); - sr2_cnt = DIV_ROUND_CLOSEST(OMAP_ABB_SETTLING_TIME * 10, clk_cycles); - - setbits_le32(setup, - sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1)); -} - -void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, - u32 txdone, u32 txdone_mask, u32 opp) -{ - u32 abb_type_mask, opp_sel_mask; - - /* sanity check */ - if (!setup || !control || !txdone) - return; - - /* setup ABB only in case of Fast or Slow OPP */ - switch (opp) { - case OMAP_ABB_FAST_OPP: - abb_type_mask = OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK; - opp_sel_mask = OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK; - break; - case OMAP_ABB_SLOW_OPP: - abb_type_mask = OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK; - opp_sel_mask = OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK; - break; - default: - return; - } - - /* - * For some OMAP silicons additional setup for LDOVBB register is - * required. This is determined by data retrieved from corresponding - * OPP EFUSE register. Data, which is retrieved from EFUSE - is - * ABB enable/disable flag and VSET value, which must be copied - * to LDOVBB register. If function call fails - return quietly, - * it means no ABB is required for such silicon. - * - * For silicons, which don't require LDOVBB setup "fuse" and - * "ldovbb" offsets are not defined. ABB will be initialized in - * the common way for them. - */ - if (fuse && ldovbb) { - if (abb_setup_ldovbb(fuse, ldovbb)) - return; - } - - /* clear ABB registers */ - writel(0, setup); - writel(0, control); - - /* configure timings, based on oscillator value */ - abb_setup_timings(setup); - - /* clear pending interrupts before setup */ - setbits_le32(txdone, txdone_mask); - - /* select ABB type */ - setbits_le32(setup, abb_type_mask | OMAP_ABB_SETUP_SR2EN_MASK); - - /* initiate ABB ldo change */ - setbits_le32(control, opp_sel_mask | OMAP_ABB_CONTROL_OPP_CHANGE_MASK); - - /* wait until transition complete */ - if (!wait_on_value(txdone_mask, txdone_mask, (void *)txdone, LDELAY)) - puts("Error: ABB txdone is not set\n"); - - /* clear ABB tranxdone */ - setbits_le32(txdone, txdone_mask); -} diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c deleted file mode 100644 index 385310b..0000000 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - * boot-common.c - * - * Common bootmode functions for omap based boards - * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -__weak u32 omap_sys_boot_device(void) -{ - return BOOT_DEVICE_NONE; -} - -void save_omap_boot_params(void) -{ - u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); - struct omap_boot_parameters *omap_boot_params; - int sys_boot_device = 0; - u32 boot_device; - u32 boot_mode; - - if ((boot_params < NON_SECURE_SRAM_START) || - (boot_params > NON_SECURE_SRAM_END)) - return; - - omap_boot_params = (struct omap_boot_parameters *)boot_params; - - boot_device = omap_boot_params->boot_device; - boot_mode = MMCSD_MODE_UNDEFINED; - - /* Boot device */ - -#ifdef BOOT_DEVICE_NAND_I2C - /* - * Re-map NAND&I2C boot-device to the "normal" NAND boot-device. - * Otherwise the SPL boot IF can't handle this device correctly. - * Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens - * Draco leads to this boot-device passed to SPL from the BootROM. - */ - if (boot_device == BOOT_DEVICE_NAND_I2C) - boot_device = BOOT_DEVICE_NAND; -#endif -#ifdef BOOT_DEVICE_QSPI_4 - /* - * We get different values for QSPI_1 and QSPI_4 being used, but - * don't actually care about this difference. Rather than - * mangle the later code, if we're coming in as QSPI_4 just - * change to the QSPI_1 value. - */ - if (boot_device == BOOT_DEVICE_QSPI_4) - boot_device = BOOT_DEVICE_SPI; -#endif - /* - * When booting from peripheral booting, the boot device is not usable - * as-is (unless there is support for it), so the boot device is instead - * figured out using the SYS_BOOT pins. - */ - switch (boot_device) { -#if defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT) - case BOOT_DEVICE_UART: - sys_boot_device = 1; - break; -#endif -#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT) - case BOOT_DEVICE_USB: - sys_boot_device = 1; - break; -#endif -#if defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USBETH_SUPPORT) - case BOOT_DEVICE_USBETH: - sys_boot_device = 1; - break; -#endif -#if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH_SUPPORT) - case BOOT_DEVICE_CPGMAC: - sys_boot_device = 1; - break; -#endif -#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU_SUPPORT) - case BOOT_DEVICE_DFU: - sys_boot_device = 1; - break; -#endif - } - - if (sys_boot_device) { - boot_device = omap_sys_boot_device(); - - /* MMC raw mode will fallback to FS mode. */ - if ((boot_device >= MMC_BOOT_DEVICES_START) && - (boot_device <= MMC_BOOT_DEVICES_END)) - boot_mode = MMCSD_MODE_RAW; - } - - gd->arch.omap_boot_device = boot_device; - - /* Boot mode */ - -#ifdef CONFIG_OMAP34XX - if ((boot_device >= MMC_BOOT_DEVICES_START) && - (boot_device <= MMC_BOOT_DEVICES_END)) { - switch (boot_device) { - case BOOT_DEVICE_MMC1: - boot_mode = MMCSD_MODE_FS; - break; - case BOOT_DEVICE_MMC2: - boot_mode = MMCSD_MODE_RAW; - break; - } - } -#else - /* - * If the boot device was dynamically changed and doesn't match what - * the bootrom initially booted, we cannot use the boot device - * descriptor to figure out the boot mode. - */ - if ((boot_device == omap_boot_params->boot_device) && - (boot_device >= MMC_BOOT_DEVICES_START) && - (boot_device <= MMC_BOOT_DEVICES_END)) { - boot_params = omap_boot_params->boot_device_descriptor; - if ((boot_params < NON_SECURE_SRAM_START) || - (boot_params > NON_SECURE_SRAM_END)) - return; - - boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET)); - if ((boot_params < NON_SECURE_SRAM_START) || - (boot_params > NON_SECURE_SRAM_END)) - return; - - boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET)); - - if (boot_mode != MMCSD_MODE_FS && - boot_mode != MMCSD_MODE_RAW) -#ifdef CONFIG_SUPPORT_EMMC_BOOT - boot_mode = MMCSD_MODE_EMMCBOOT; -#else - boot_mode = MMCSD_MODE_UNDEFINED; -#endif - } -#endif - - gd->arch.omap_boot_mode = boot_mode; - -#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \ - !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) - - /* CH flags */ - - gd->arch.omap_ch_flags = omap_boot_params->ch_flags; -#endif -} - -#ifdef CONFIG_SPL_BUILD -u32 spl_boot_device(void) -{ - return gd->arch.omap_boot_device; -} - -u32 spl_boot_mode(const u32 boot_device) -{ - return gd->arch.omap_boot_mode; -} - -void spl_board_init(void) -{ - /* - * Save the boot parameters passed from romcode. - * We cannot delay the saving further than this, - * to prevent overwrites. - */ - save_omap_boot_params(); - - /* Prepare console output */ - preloader_console_init(); - -#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) - gpmc_init(); -#endif -#ifdef CONFIG_SPL_I2C_SUPPORT - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); -#endif -#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) - arch_misc_init(); -#endif -#if defined(CONFIG_HW_WATCHDOG) - hw_watchdog_init(); -#endif -#ifdef CONFIG_AM33XX - am33xx_spl_board_init(); -#endif -} - -__weak int board_mmc_init(bd_t *bis) -{ - switch (spl_boot_device()) { - case BOOT_DEVICE_MMC1: - omap_mmc_init(0, 0, 0, -1, -1); - break; - case BOOT_DEVICE_MMC2: - case BOOT_DEVICE_MMC2_2: - omap_mmc_init(0, 0, 0, -1, -1); - omap_mmc_init(1, 0, 0, -1, -1); - break; - } - return 0; -} - -void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) -{ - typedef void __noreturn (*image_entry_noargs_t)(u32 *); - image_entry_noargs_t image_entry = - (image_entry_noargs_t) spl_image->entry_point; - - u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); - - debug("image entry point: 0x%X\n", spl_image->entry_point); - /* Pass the saved boot_params from rom code */ - image_entry((u32 *)boot_params); -} -#endif - -#ifdef CONFIG_SCSI_AHCI_PLAT -void arch_preboot_os(void) -{ - ahci_reset((void __iomem *)DWC_AHSATA_BASE); -} -#endif - -#if defined(CONFIG_USB_FUNCTION_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE) -int fb_set_reboot_flag(void) -{ - printf("Setting reboot to fastboot flag ...\n"); - setenv("dofastboot", "1"); - saveenv(); - return 0; -} -#endif diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c deleted file mode 100644 index 9b97583..0000000 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ /dev/null @@ -1,892 +0,0 @@ -/* - * - * Clock initialization for OMAP4 - * - * (C) Copyright 2010 - * Texas Instruments, - * - * Aneesh V - * - * Based on previous work by: - * Santosh Shilimkar - * Rajendra Nayak - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifndef CONFIG_SPL_BUILD -/* - * printing to console doesn't work unless - * this code is executed from SPL - */ -#define printf(fmt, args...) -#define puts(s) -#endif - -const u32 sys_clk_array[8] = { - 12000000, /* 12 MHz */ - 20000000, /* 20 MHz */ - 16800000, /* 16.8 MHz */ - 19200000, /* 19.2 MHz */ - 26000000, /* 26 MHz */ - 27000000, /* 27 MHz */ - 38400000, /* 38.4 MHz */ -}; - -static inline u32 __get_sys_clk_index(void) -{ - s8 ind; - /* - * For ES1 the ROM code calibration of sys clock is not reliable - * due to hw issue. So, use hard-coded value. If this value is not - * correct for any board over-ride this function in board file - * From ES2.0 onwards you will get this information from - * CM_SYS_CLKSEL - */ - if (omap_revision() == OMAP4430_ES1_0) - ind = OMAP_SYS_CLK_IND_38_4_MHZ; - else { - /* SYS_CLKSEL - 1 to match the dpll param array indices */ - ind = (readl((*prcm)->cm_sys_clksel) & - CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1; - } - return ind; -} - -u32 get_sys_clk_index(void) - __attribute__ ((weak, alias("__get_sys_clk_index"))); - -u32 get_sys_clk_freq(void) -{ - u8 index = get_sys_clk_index(); - return sys_clk_array[index]; -} - -void setup_post_dividers(u32 const base, const struct dpll_params *params) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - /* Setup post-dividers */ - if (params->m2 >= 0) - writel(params->m2, &dpll_regs->cm_div_m2_dpll); - if (params->m3 >= 0) - writel(params->m3, &dpll_regs->cm_div_m3_dpll); - if (params->m4_h11 >= 0) - writel(params->m4_h11, &dpll_regs->cm_div_m4_h11_dpll); - if (params->m5_h12 >= 0) - writel(params->m5_h12, &dpll_regs->cm_div_m5_h12_dpll); - if (params->m6_h13 >= 0) - writel(params->m6_h13, &dpll_regs->cm_div_m6_h13_dpll); - if (params->m7_h14 >= 0) - writel(params->m7_h14, &dpll_regs->cm_div_m7_h14_dpll); - if (params->h21 >= 0) - writel(params->h21, &dpll_regs->cm_div_h21_dpll); - if (params->h22 >= 0) - writel(params->h22, &dpll_regs->cm_div_h22_dpll); - if (params->h23 >= 0) - writel(params->h23, &dpll_regs->cm_div_h23_dpll); - if (params->h24 >= 0) - writel(params->h24, &dpll_regs->cm_div_h24_dpll); -} - -static inline void do_bypass_dpll(u32 const base) -{ - struct dpll_regs *dpll_regs = (struct dpll_regs *)base; - - clrsetbits_le32(&dpll_regs->cm_clkmode_dpll, - CM_CLKMODE_DPLL_DPLL_EN_MASK, - DPLL_EN_FAST_RELOCK_BYPASS << - CM_CLKMODE_DPLL_EN_SHIFT); -} - -static inline void wait_for_bypass(u32 const base) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll, - LDELAY)) { - printf("Bypassing DPLL failed %x\n", base); - } -} - -static inline void do_lock_dpll(u32 const base) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - clrsetbits_le32(&dpll_regs->cm_clkmode_dpll, - CM_CLKMODE_DPLL_DPLL_EN_MASK, - DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); -} - -static inline void wait_for_lock(u32 const base) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, - &dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("DPLL locking failed for %x\n", base); - hang(); - } -} - -inline u32 check_for_lock(u32 const base) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - u32 lock = readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK; - - return lock; -} - -const struct dpll_params *get_mpu_dpll_params(struct dplls const *dpll_data) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &dpll_data->mpu[sysclk_ind]; -} - -const struct dpll_params *get_core_dpll_params(struct dplls const *dpll_data) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &dpll_data->core[sysclk_ind]; -} - -const struct dpll_params *get_per_dpll_params(struct dplls const *dpll_data) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &dpll_data->per[sysclk_ind]; -} - -const struct dpll_params *get_iva_dpll_params(struct dplls const *dpll_data) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &dpll_data->iva[sysclk_ind]; -} - -const struct dpll_params *get_usb_dpll_params(struct dplls const *dpll_data) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &dpll_data->usb[sysclk_ind]; -} - -const struct dpll_params *get_abe_dpll_params(struct dplls const *dpll_data) -{ -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - u32 sysclk_ind = get_sys_clk_index(); - return &dpll_data->abe[sysclk_ind]; -#else - return dpll_data->abe; -#endif -} - -static const struct dpll_params *get_ddr_dpll_params - (struct dplls const *dpll_data) -{ - u32 sysclk_ind = get_sys_clk_index(); - - if (!dpll_data->ddr) - return NULL; - return &dpll_data->ddr[sysclk_ind]; -} - -#ifdef CONFIG_DRIVER_TI_CPSW -static const struct dpll_params *get_gmac_dpll_params - (struct dplls const *dpll_data) -{ - u32 sysclk_ind = get_sys_clk_index(); - - if (!dpll_data->gmac) - return NULL; - return &dpll_data->gmac[sysclk_ind]; -} -#endif - -static void do_setup_dpll(u32 const base, const struct dpll_params *params, - u8 lock, char *dpll) -{ - u32 temp, M, N; - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - if (!params) - return; - - temp = readl(&dpll_regs->cm_clksel_dpll); - - if (check_for_lock(base)) { - /* - * The Dpll has already been locked by rom code using CH. - * Check if M,N are matching with Ideal nominal opp values. - * If matches, skip the rest otherwise relock. - */ - M = (temp & CM_CLKSEL_DPLL_M_MASK) >> CM_CLKSEL_DPLL_M_SHIFT; - N = (temp & CM_CLKSEL_DPLL_N_MASK) >> CM_CLKSEL_DPLL_N_SHIFT; - if ((M != (params->m)) || (N != (params->n))) { - debug("\n %s Dpll locked, but not for ideal M = %d," - "N = %d values, current values are M = %d," - "N= %d" , dpll, params->m, params->n, - M, N); - } else { - /* Dpll locked with ideal values for nominal opps. */ - debug("\n %s Dpll already locked with ideal" - "nominal opp values", dpll); - - bypass_dpll(base); - goto setup_post_dividers; - } - } - - bypass_dpll(base); - - /* Set M & N */ - temp &= ~CM_CLKSEL_DPLL_M_MASK; - temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK; - - temp &= ~CM_CLKSEL_DPLL_N_MASK; - temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK; - - writel(temp, &dpll_regs->cm_clksel_dpll); - -setup_post_dividers: - setup_post_dividers(base, params); - - /* Lock */ - if (lock) - do_lock_dpll(base); - - /* Wait till the DPLL locks */ - if (lock) - wait_for_lock(base); -} - -u32 omap_ddr_clk(void) -{ - u32 ddr_clk, sys_clk_khz, omap_rev, divider; - const struct dpll_params *core_dpll_params; - - omap_rev = omap_revision(); - sys_clk_khz = get_sys_clk_freq() / 1000; - - core_dpll_params = get_core_dpll_params(*dplls_data); - - debug("sys_clk %d\n ", sys_clk_khz * 1000); - - /* Find Core DPLL locked frequency first */ - ddr_clk = sys_clk_khz * 2 * core_dpll_params->m / - (core_dpll_params->n + 1); - - if (omap_rev < OMAP5430_ES1_0) { - /* - * DDR frequency is PHY_ROOT_CLK/2 - * PHY_ROOT_CLK = Fdpll/2/M2 - */ - divider = 4; - } else { - /* - * DDR frequency is PHY_ROOT_CLK - * PHY_ROOT_CLK = Fdpll/2/M2 - */ - divider = 2; - } - - ddr_clk = ddr_clk / divider / core_dpll_params->m2; - ddr_clk *= 1000; /* convert to Hz */ - debug("ddr_clk %d\n ", ddr_clk); - - return ddr_clk; -} - -/* - * Lock MPU dpll - * - * Resulting MPU frequencies: - * 4430 ES1.0 : 600 MHz - * 4430 ES2.x : 792 MHz (OPP Turbo) - * 4460 : 920 MHz (OPP Turbo) - DCC disabled - */ -void configure_mpu_dpll(void) -{ - const struct dpll_params *params; - struct dpll_regs *mpu_dpll_regs; - u32 omap_rev; - omap_rev = omap_revision(); - - /* - * DCC and clock divider settings for 4460. - * DCC is required, if more than a certain frequency is required. - * For, 4460 > 1GHZ. - * 5430 > 1.4GHZ. - */ - if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) { - mpu_dpll_regs = - (struct dpll_regs *)((*prcm)->cm_clkmode_dpll_mpu); - bypass_dpll((*prcm)->cm_clkmode_dpll_mpu); - clrbits_le32((*prcm)->cm_mpu_mpu_clkctrl, - MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); - setbits_le32((*prcm)->cm_mpu_mpu_clkctrl, - MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); - clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll, - CM_CLKSEL_DCC_EN_MASK); - } - - params = get_mpu_dpll_params(*dplls_data); - - do_setup_dpll((*prcm)->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); - debug("MPU DPLL locked\n"); -} - -#if defined(CONFIG_USB_EHCI_OMAP) || defined(CONFIG_USB_XHCI_OMAP) || \ - defined(CONFIG_USB_MUSB_OMAP2PLUS) -static void setup_usb_dpll(void) -{ - const struct dpll_params *params; - u32 sys_clk_khz, sd_div, num, den; - - sys_clk_khz = get_sys_clk_freq() / 1000; - /* - * USB: - * USB dpll is J-type. Need to set DPLL_SD_DIV for jitter correction - * DPLL_SD_DIV = CEILING ([DPLL_MULT/(DPLL_DIV+1)]* CLKINP / 250) - * - where CLKINP is sys_clk in MHz - * Use CLKINP in KHz and adjust the denominator accordingly so - * that we have enough accuracy and at the same time no overflow - */ - params = get_usb_dpll_params(*dplls_data); - num = params->m * sys_clk_khz; - den = (params->n + 1) * 250 * 1000; - num += den - 1; - sd_div = num / den; - clrsetbits_le32((*prcm)->cm_clksel_dpll_usb, - CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK, - sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT); - - /* Now setup the dpll with the regular function */ - do_setup_dpll((*prcm)->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb"); -} -#endif - -static void setup_dplls(void) -{ - u32 temp; - const struct dpll_params *params; - struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; - - debug("setup_dplls\n"); - - /* CORE dpll */ - params = get_core_dpll_params(*dplls_data); /* default - safest */ - /* - * Do not lock the core DPLL now. Just set it up. - * Core DPLL will be locked after setting up EMIF - * using the FREQ_UPDATE method(freq_update_core()) - */ - if (emif_sdram_type(readl(&emif->emif_sdram_config)) == - EMIF_SDRAM_TYPE_LPDDR2) - do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, - DPLL_NO_LOCK, "core"); - else - do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, - DPLL_LOCK, "core"); - /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */ - temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) | - (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) | - (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT); - writel(temp, (*prcm)->cm_clksel_core); - debug("Core DPLL configured\n"); - - /* lock PER dpll */ - params = get_per_dpll_params(*dplls_data); - do_setup_dpll((*prcm)->cm_clkmode_dpll_per, - params, DPLL_LOCK, "per"); - debug("PER DPLL locked\n"); - - /* MPU dpll */ - configure_mpu_dpll(); - -#if defined(CONFIG_USB_EHCI_OMAP) || defined(CONFIG_USB_XHCI_OMAP) || \ - defined(CONFIG_USB_MUSB_OMAP2PLUS) - setup_usb_dpll(); -#endif - params = get_ddr_dpll_params(*dplls_data); - do_setup_dpll((*prcm)->cm_clkmode_dpll_ddrphy, - params, DPLL_LOCK, "ddr"); - -#ifdef CONFIG_DRIVER_TI_CPSW - params = get_gmac_dpll_params(*dplls_data); - do_setup_dpll((*prcm)->cm_clkmode_dpll_gmac, params, - DPLL_LOCK, "gmac"); -#endif -} - -u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic) -{ - u32 offset_code; - - volt_offset -= pmic->base_offset; - - offset_code = (volt_offset + pmic->step - 1) / pmic->step; - - /* - * Offset codes 1-6 all give the base voltage in Palmas - * Offset code 0 switches OFF the SMPS - */ - return offset_code + pmic->start_code; -} - -void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) -{ - u32 offset_code; - u32 offset = volt_mv; - int ret = 0; - - if (!volt_mv) - return; - - pmic->pmic_bus_init(); - /* See if we can first get the GPIO if needed */ - if (pmic->gpio_en) - ret = gpio_request(pmic->gpio, "PMIC_GPIO"); - - if (ret < 0) { - printf("%s: gpio %d request failed %d\n", __func__, - pmic->gpio, ret); - return; - } - - /* Pull the GPIO low to select SET0 register, while we program SET1 */ - if (pmic->gpio_en) - gpio_direction_output(pmic->gpio, 0); - - /* convert to uV for better accuracy in the calculations */ - offset *= 1000; - - offset_code = get_offset_code(offset, pmic); - - debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, - offset_code); - - if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code)) - printf("Scaling voltage failed for 0x%x\n", vcore_reg); - if (pmic->gpio_en) - gpio_direction_output(pmic->gpio, 1); -} - -static u32 optimize_vcore_voltage(struct volts const *v) -{ - u32 val; - if (!v->value) - return 0; - if (!v->efuse.reg) - return v->value; - - switch (v->efuse.reg_bits) { - case 16: - val = readw(v->efuse.reg); - break; - case 32: - val = readl(v->efuse.reg); - break; - default: - printf("Error: efuse 0x%08x bits=%d unknown\n", - v->efuse.reg, v->efuse.reg_bits); - return v->value; - } - - if (!val) { - printf("Error: efuse 0x%08x bits=%d val=0, using %d\n", - v->efuse.reg, v->efuse.reg_bits, v->value); - return v->value; - } - - debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n", - __func__, v->efuse.reg, v->efuse.reg_bits, v->value, val); - return val; -} - -#ifdef CONFIG_IODELAY_RECALIBRATION -void __weak recalibrate_iodelay(void) -{ -} -#endif - -/* - * Setup the voltages for the main SoC core power domains. - * We start with the maximum voltages allowed here, as set in the corresponding - * vcores_data struct, and then scale (usually down) to the fused values that - * are retrieved from the SoC. The scaling happens only if the efuse.reg fields - * are initialised. - * Rail grouping is supported for the DRA7xx SoCs only, therefore the code is - * compiled conditionally. Note that the new code writes the scaled (or zeroed) - * values back to the vcores_data struct for eventual reuse. Zero values mean - * that the corresponding rails are not controlled separately, and are not sent - * to the PMIC. - */ -void scale_vcores(struct vcores_data const *vcores) -{ - int i; - struct volts *pv = (struct volts *)vcores; - struct volts *px; - - for (i=0; i<(sizeof(struct vcores_data)/sizeof(struct volts)); i++) { - debug("%d -> ", pv->value); - if (pv->value) { - /* Handle non-empty members only */ - pv->value = optimize_vcore_voltage(pv); - px = (struct volts *)vcores; - while (px < pv) { - /* - * Scan already handled non-empty members to see - * if we have a group and find the max voltage, - * which is set to the first occurance of the - * particular SMPS; the other group voltages are - * zeroed. - */ - if (px->value) { - if ((pv->pmic->i2c_slave_addr == - px->pmic->i2c_slave_addr) && - (pv->addr == px->addr)) { - /* Same PMIC, same SMPS */ - if (pv->value > px->value) - px->value = pv->value; - - pv->value = 0; - } - } - px++; - } - } - debug("%d\n", pv->value); - pv++; - } - - debug("cor: %d\n", vcores->core.value); - do_scale_vcore(vcores->core.addr, vcores->core.value, vcores->core.pmic); - /* - * IO delay recalibration should be done immediately after - * adjusting AVS voltages for VDD_CORE_L. - * Respective boards should call __recalibrate_iodelay() - * with proper mux, virtual and manual mode configurations. - */ -#ifdef CONFIG_IODELAY_RECALIBRATION - recalibrate_iodelay(); -#endif - - debug("mpu: %d\n", vcores->mpu.value); - do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, vcores->mpu.pmic); - /* Configure MPU ABB LDO after scale */ - abb_setup(vcores->mpu.efuse.reg, - (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl, - (*prcm)->prm_abbldo_mpu_setup, - (*prcm)->prm_abbldo_mpu_ctrl, - (*prcm)->prm_irqstatus_mpu_2, - vcores->mpu.abb_tx_done_mask, - OMAP_ABB_FAST_OPP); - - debug("mm: %d\n", vcores->mm.value); - do_scale_vcore(vcores->mm.addr, vcores->mm.value, vcores->mm.pmic); - /* Configure MM ABB LDO after scale */ - abb_setup(vcores->mm.efuse.reg, - (*ctrl)->control_wkup_ldovbb_mm_voltage_ctrl, - (*prcm)->prm_abbldo_mm_setup, - (*prcm)->prm_abbldo_mm_ctrl, - (*prcm)->prm_irqstatus_mpu, - vcores->mm.abb_tx_done_mask, - OMAP_ABB_FAST_OPP); - - debug("gpu: %d\n", vcores->gpu.value); - do_scale_vcore(vcores->gpu.addr, vcores->gpu.value, vcores->gpu.pmic); - /* Configure GPU ABB LDO after scale */ - abb_setup(vcores->gpu.efuse.reg, - (*ctrl)->control_wkup_ldovbb_gpu_voltage_ctrl, - (*prcm)->prm_abbldo_gpu_setup, - (*prcm)->prm_abbldo_gpu_ctrl, - (*prcm)->prm_irqstatus_mpu, - vcores->gpu.abb_tx_done_mask, - OMAP_ABB_FAST_OPP); - debug("eve: %d\n", vcores->eve.value); - do_scale_vcore(vcores->eve.addr, vcores->eve.value, vcores->eve.pmic); - /* Configure EVE ABB LDO after scale */ - abb_setup(vcores->eve.efuse.reg, - (*ctrl)->control_wkup_ldovbb_eve_voltage_ctrl, - (*prcm)->prm_abbldo_eve_setup, - (*prcm)->prm_abbldo_eve_ctrl, - (*prcm)->prm_irqstatus_mpu, - vcores->eve.abb_tx_done_mask, - OMAP_ABB_FAST_OPP); - debug("iva: %d\n", vcores->iva.value); - do_scale_vcore(vcores->iva.addr, vcores->iva.value, vcores->iva.pmic); - /* Configure IVA ABB LDO after scale */ - abb_setup(vcores->iva.efuse.reg, - (*ctrl)->control_wkup_ldovbb_iva_voltage_ctrl, - (*prcm)->prm_abbldo_iva_setup, - (*prcm)->prm_abbldo_iva_ctrl, - (*prcm)->prm_irqstatus_mpu, - vcores->iva.abb_tx_done_mask, - OMAP_ABB_FAST_OPP); -} - -static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode) -{ - clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, - enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT); - debug("Enable clock domain - %x\n", clkctrl_reg); -} - -static inline void disable_clock_domain(u32 const clkctrl_reg) -{ - clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, - CD_CLKCTRL_CLKTRCTRL_SW_SLEEP << - CD_CLKCTRL_CLKTRCTRL_SHIFT); - debug("Disable clock domain - %x\n", clkctrl_reg); -} - -static inline void wait_for_clk_enable(u32 clkctrl_addr) -{ - u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; - u32 bound = LDELAY; - - while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) || - (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) { - - clkctrl = readl(clkctrl_addr); - idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> - MODULE_CLKCTRL_IDLEST_SHIFT; - if (--bound == 0) { - printf("Clock enable failed for 0x%x idlest 0x%x\n", - clkctrl_addr, clkctrl); - return; - } - } -} - -static inline void enable_clock_module(u32 const clkctrl_addr, u32 enable_mode, - u32 wait_for_enable) -{ - clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, - enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT); - debug("Enable clock module - %x\n", clkctrl_addr); - if (wait_for_enable) - wait_for_clk_enable(clkctrl_addr); -} - -static inline void wait_for_clk_disable(u32 clkctrl_addr) -{ - u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL; - u32 bound = LDELAY; - - while ((idlest != MODULE_CLKCTRL_IDLEST_DISABLED)) { - clkctrl = readl(clkctrl_addr); - idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> - MODULE_CLKCTRL_IDLEST_SHIFT; - if (--bound == 0) { - printf("Clock disable failed for 0x%x idlest 0x%x\n", - clkctrl_addr, clkctrl); - return; - } - } -} - -static inline void disable_clock_module(u32 const clkctrl_addr, - u32 wait_for_disable) -{ - clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_DISABLE << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - debug("Disable clock module - %x\n", clkctrl_addr); - if (wait_for_disable) - wait_for_clk_disable(clkctrl_addr); -} - -void freq_update_core(void) -{ - u32 freq_config1 = 0; - const struct dpll_params *core_dpll_params; - u32 omap_rev = omap_revision(); - - core_dpll_params = get_core_dpll_params(*dplls_data); - /* Put EMIF clock domain in sw wakeup mode */ - enable_clock_domain((*prcm)->cm_memif_clkstctrl, - CD_CLKCTRL_CLKTRCTRL_SW_WKUP); - wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); - wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); - - freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK | - SHADOW_FREQ_CONFIG1_DLL_RESET_MASK; - - freq_config1 |= (DPLL_EN_LOCK << SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT) & - SHADOW_FREQ_CONFIG1_DPLL_EN_MASK; - - freq_config1 |= (core_dpll_params->m2 << - SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) & - SHADOW_FREQ_CONFIG1_M2_DIV_MASK; - - writel(freq_config1, (*prcm)->cm_shadow_freq_config1); - if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0, - (u32 *) (*prcm)->cm_shadow_freq_config1, LDELAY)) { - puts("FREQ UPDATE procedure failed!!"); - hang(); - } - - /* - * Putting EMIF in HW_AUTO is seen to be causing issues with - * EMIF clocks and the master DLL. Keep EMIF in SW_WKUP - * in OMAP5430 ES1.0 silicon - */ - if (omap_rev != OMAP5430_ES1_0) { - /* Put EMIF clock domain back in hw auto mode */ - enable_clock_domain((*prcm)->cm_memif_clkstctrl, - CD_CLKCTRL_CLKTRCTRL_HW_AUTO); - wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); - wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); - } -} - -void bypass_dpll(u32 const base) -{ - do_bypass_dpll(base); - wait_for_bypass(base); -} - -void lock_dpll(u32 const base) -{ - do_lock_dpll(base); - wait_for_lock(base); -} - -static void setup_clocks_for_console(void) -{ - /* Do not add any spl_debug prints in this function */ - clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, - CD_CLKCTRL_CLKTRCTRL_SW_WKUP << - CD_CLKCTRL_CLKTRCTRL_SHIFT); - - /* Enable all UARTs - console will be on one of them */ - clrsetbits_le32((*prcm)->cm_l4per_uart1_clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - - clrsetbits_le32((*prcm)->cm_l4per_uart2_clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - - clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - - clrsetbits_le32((*prcm)->cm_l4per_uart4_clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - - clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, - CD_CLKCTRL_CLKTRCTRL_HW_AUTO << - CD_CLKCTRL_CLKTRCTRL_SHIFT); -} - -void do_enable_clocks(u32 const *clk_domains, - u32 const *clk_modules_hw_auto, - u32 const *clk_modules_explicit_en, - u8 wait_for_enable) -{ - u32 i, max = 100; - - /* Put the clock domains in SW_WKUP mode */ - for (i = 0; (i < max) && clk_domains[i]; i++) { - enable_clock_domain(clk_domains[i], - CD_CLKCTRL_CLKTRCTRL_SW_WKUP); - } - - /* Clock modules that need to be put in HW_AUTO */ - for (i = 0; (i < max) && clk_modules_hw_auto[i]; i++) { - enable_clock_module(clk_modules_hw_auto[i], - MODULE_CLKCTRL_MODULEMODE_HW_AUTO, - wait_for_enable); - }; - - /* Clock modules that need to be put in SW_EXPLICIT_EN mode */ - for (i = 0; (i < max) && clk_modules_explicit_en[i]; i++) { - enable_clock_module(clk_modules_explicit_en[i], - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN, - wait_for_enable); - }; - - /* Put the clock domains in HW_AUTO mode now */ - for (i = 0; (i < max) && clk_domains[i]; i++) { - enable_clock_domain(clk_domains[i], - CD_CLKCTRL_CLKTRCTRL_HW_AUTO); - } -} - -void do_disable_clocks(u32 const *clk_domains, - u32 const *clk_modules_disable, - u8 wait_for_disable) -{ - u32 i, max = 100; - - - /* Clock modules that need to be put in SW_DISABLE */ - for (i = 0; (i < max) && clk_modules_disable[i]; i++) - disable_clock_module(clk_modules_disable[i], - wait_for_disable); - - /* Put the clock domains in SW_SLEEP mode */ - for (i = 0; (i < max) && clk_domains[i]; i++) - disable_clock_domain(clk_domains[i]); -} - -/** - * setup_early_clocks() - Setup early clocks needed for SoC - * - * Setup clocks for console, SPL basic initialization clocks and initialize - * the timer. This is invoked prior prcm_init. - */ -void setup_early_clocks(void) -{ - switch (omap_hw_init_context()) { - case OMAP_INIT_CONTEXT_SPL: - case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: - case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: - setup_clocks_for_console(); - enable_basic_clocks(); - timer_init(); - /* Fall through */ - } -} - -void prcm_init(void) -{ - switch (omap_hw_init_context()) { - case OMAP_INIT_CONTEXT_SPL: - case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: - case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: - scale_vcores(*omap_vcores); - setup_dplls(); - setup_warmreset_time(); - break; - default: - break; - } - - if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) - enable_basic_uboot_clocks(); -} - -void gpi2c_init(void) -{ - static int gpi2c = 1; - - if (gpi2c) { - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, - CONFIG_SYS_OMAP24_I2C_SLAVE); - gpi2c = 0; - } -} diff --git a/arch/arm/cpu/armv7/omap-common/config_secure.mk b/arch/arm/cpu/armv7/omap-common/config_secure.mk deleted file mode 100644 index 1122439..0000000 --- a/arch/arm/cpu/armv7/omap-common/config_secure.mk +++ /dev/null @@ -1,113 +0,0 @@ -# -# Copyright (C) 2016, Texas Instruments, Incorporated - http://www.ti.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# -quiet_cmd_mkomapsecimg = MKIMAGE $@ -ifneq ($(TI_SECURE_DEV_PKG),) -ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh),) -ifneq ($(CONFIG_SPL_BUILD),) -cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \ - $(patsubst u-boot-spl_HS_%,%,$(@F)) $< $@ $(CONFIG_ISW_ENTRY_ADDR) \ - $(if $(KBUILD_VERBOSE:1=), >/dev/null) -else -cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \ - $(patsubst u-boot_HS_%,%,$(@F)) $< $@ $(CONFIG_ISW_ENTRY_ADDR) \ - $(if $(KBUILD_VERBOSE:1=), >/dev/null) -endif -else -cmd_mkomapsecimg = echo "WARNING:" \ - "$(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh not found." \ - "$@ was NOT created!" -endif -else -cmd_mkomapsecimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \ - "variable must be defined for TI secure devices. $@ was NOT created!" -endif - -ifdef CONFIG_SPL_LOAD_FIT -quiet_cmd_omapsecureimg = SECURE $@ -ifneq ($(TI_SECURE_DEV_PKG),) -ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh),) -cmd_omapsecureimg = $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh \ - $< $@ \ - $(if $(KBUILD_VERBOSE:1=), >/dev/null) -else -cmd_omapsecureimg = echo "WARNING:" \ - "$(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh not found." \ - "$@ was NOT created!"; cp $< $@ -endif -else -cmd_omapsecureimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \ - "variable must be defined for TI secure devices." \ - "$@ was NOT created!"; cp $< $@ -endif -endif - - -# Standard X-LOADER target (QPSI, NOR flash) -u-boot-spl_HS_X-LOADER: $(obj)/u-boot-spl.bin - $(call if_changed,mkomapsecimg) - -# For MLO targets (SD card boot) the final file name that is copied to the SD -# card FAT partition must be MLO, so we make a copy of the output file to a new -# file with that name -u-boot-spl_HS_MLO: $(obj)/u-boot-spl.bin - $(call if_changed,mkomapsecimg) - @if [ -f $@ ]; then \ - cp -f $@ MLO; \ - fi - -# Standard 2ND target (certain peripheral boot modes) -u-boot-spl_HS_2ND: $(obj)/u-boot-spl.bin - $(call if_changed,mkomapsecimg) - -# Standard ULO target (certain peripheral boot modes) -u-boot-spl_HS_ULO: $(obj)/u-boot-spl.bin - $(call if_changed,mkomapsecimg) - -# Standard ISSW target (certain devices, various boot modes) -u-boot-spl_HS_ISSW: $(obj)/u-boot-spl.bin - $(call if_changed,mkomapsecimg) - -# For SPI flash on AM335x and AM43xx, these require special byte swap handling -# so we use the SPI_X-LOADER target instead of X-LOADER and let the -# create-boot-image.sh script handle that -u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin - $(call if_changed,mkomapsecimg) - -# For supporting single stage XiP QSPI on AM43xx, the image is a full u-boot -# file, not an SPL. In this case the mkomapsecimg command looks for a -# u-boot-HS_* prefix -u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin - $(call if_changed,mkomapsecimg) - -# For supporting the SPL loading and interpreting of FIT images whose -# components are pre-processed before being integrated into the FIT image in -# order to secure them in some way -ifdef CONFIG_SPL_LOAD_FIT - -MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ - -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ - -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ - $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) - -OF_LIST_TARGETS = $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -$(OF_LIST_TARGETS): dtbs - -%_HS.dtb: %.dtb - $(call if_changed,omapsecureimg) - $(Q)if [ -f $@ ]; then \ - cp -f $@ $<; \ - fi - -u-boot-nodtb_HS.bin: u-boot-nodtb.bin - $(call if_changed,omapsecureimg) - -u-boot_HS.img: u-boot-nodtb_HS.bin u-boot.img $(patsubst %.dtb,%_HS.dtb,$(OF_LIST_TARGETS)) - $(call if_changed,mkimage) - $(Q)if [ -f $@ ]; then \ - cp -f $@ u-boot.img; \ - fi - -endif diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c deleted file mode 100644 index b26984e..0000000 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ /dev/null @@ -1,1504 +0,0 @@ -/* - * EMIF programming - * - * (C) Copyright 2010 - * Texas Instruments, - * - * Aneesh V - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -static int emif1_enabled = -1, emif2_enabled = -1; - -void set_lpmode_selfrefresh(u32 base) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - u32 reg; - - reg = readl(&emif->emif_pwr_mgmt_ctrl); - reg &= ~EMIF_REG_LP_MODE_MASK; - reg |= LP_MODE_SELF_REFRESH << EMIF_REG_LP_MODE_SHIFT; - reg &= ~EMIF_REG_SR_TIM_MASK; - writel(reg, &emif->emif_pwr_mgmt_ctrl); - - /* dummy read for the new SR_TIM to be loaded */ - readl(&emif->emif_pwr_mgmt_ctrl); -} - -void force_emif_self_refresh() -{ - set_lpmode_selfrefresh(EMIF1_BASE); - if (!is_dra72x()) - set_lpmode_selfrefresh(EMIF2_BASE); -} - -inline u32 emif_num(u32 base) -{ - if (base == EMIF1_BASE) - return 1; - else if (base == EMIF2_BASE) - return 2; - else - return 0; -} - -static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr) -{ - u32 mr; - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - mr_addr |= cs << EMIF_REG_CS_SHIFT; - writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); - if (omap_revision() == OMAP4430_ES2_0) - mr = readl(&emif->emif_lpddr2_mode_reg_data_es2); - else - mr = readl(&emif->emif_lpddr2_mode_reg_data); - debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base), - cs, mr_addr, mr); - if (((mr & 0x0000ff00) >> 8) == (mr & 0xff) && - ((mr & 0x00ff0000) >> 16) == (mr & 0xff) && - ((mr & 0xff000000) >> 24) == (mr & 0xff)) - return mr & 0xff; - else - return mr; -} - -static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - mr_addr |= cs << EMIF_REG_CS_SHIFT; - writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); - writel(mr_val, &emif->emif_lpddr2_mode_reg_data); -} - -void emif_reset_phy(u32 base) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - u32 iodft; - - iodft = readl(&emif->emif_iodft_tlgc); - iodft |= EMIF_REG_RESET_PHY_MASK; - writel(iodft, &emif->emif_iodft_tlgc); -} - -static void do_lpddr2_init(u32 base, u32 cs) -{ - u32 mr_addr; - const struct lpddr2_mr_regs *mr_regs; - - get_lpddr2_mr_regs(&mr_regs); - /* Wait till device auto initialization is complete */ - while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK) - ; - set_mr(base, cs, LPDDR2_MR10, mr_regs->mr10); - /* - * tZQINIT = 1 us - * Enough loops assuming a maximum of 2GHz - */ - - sdelay(2000); - - set_mr(base, cs, LPDDR2_MR1, mr_regs->mr1); - set_mr(base, cs, LPDDR2_MR16, mr_regs->mr16); - - /* - * Enable refresh along with writing MR2 - * Encoding of RL in MR2 is (RL - 2) - */ - mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK; - set_mr(base, cs, mr_addr, mr_regs->mr2); - - if (mr_regs->mr3 > 0) - set_mr(base, cs, LPDDR2_MR3, mr_regs->mr3); -} - -static void lpddr2_init(u32 base, const struct emif_regs *regs) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - /* Not NVM */ - clrbits_le32(&emif->emif_lpddr2_nvm_config, EMIF_REG_CS1NVMEN_MASK); - - /* - * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM - * when EMIF_SDRAM_CONFIG register is written - */ - setbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK); - - /* - * Set the SDRAM_CONFIG and PHY_CTRL for the - * un-locked frequency & default RL - */ - writel(regs->sdram_config_init, &emif->emif_sdram_config); - writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); - - do_ext_phy_settings(base, regs); - - do_lpddr2_init(base, CS0); - if (regs->sdram_config & EMIF_REG_EBANK_MASK) - do_lpddr2_init(base, CS1); - - writel(regs->sdram_config, &emif->emif_sdram_config); - writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); - - /* Enable refresh now */ - clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK); - - } - -__weak void do_ext_phy_settings(u32 base, const struct emif_regs *regs) -{ -} - -void emif_update_timings(u32 base, const struct emif_regs *regs) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - if (!is_dra7xx()) - writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl_shdw); - else - writel(regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl_shdw); - - writel(regs->sdram_tim1, &emif->emif_sdram_tim_1_shdw); - writel(regs->sdram_tim2, &emif->emif_sdram_tim_2_shdw); - writel(regs->sdram_tim3, &emif->emif_sdram_tim_3_shdw); - if (omap_revision() == OMAP4430_ES1_0) { - /* ES1 bug EMIF should be in force idle during freq_update */ - writel(0, &emif->emif_pwr_mgmt_ctrl); - } else { - writel(EMIF_PWR_MGMT_CTRL, &emif->emif_pwr_mgmt_ctrl); - writel(EMIF_PWR_MGMT_CTRL_SHDW, &emif->emif_pwr_mgmt_ctrl_shdw); - } - writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl_shdw); - writel(regs->zq_config, &emif->emif_zq_config); - writel(regs->temp_alert_config, &emif->emif_temp_alert_config); - writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); - - if ((omap_revision() >= OMAP5430_ES1_0) || is_dra7xx()) { - writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, - &emif->emif_l3_config); - } else if (omap_revision() >= OMAP4460_ES1_0) { - writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0, - &emif->emif_l3_config); - } else { - writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0, - &emif->emif_l3_config); - } -} - -#ifndef CONFIG_OMAP44XX -static void omap5_ddr3_leveling(u32 base, const struct emif_regs *regs) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - /* keep sdram in self-refresh */ - writel(((LP_MODE_SELF_REFRESH << EMIF_REG_LP_MODE_SHIFT) - & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl); - __udelay(130); - - /* - * Set invert_clkout (if activated)--DDR_PHYCTRL_1 - * Invert clock adds an additional half cycle delay on the - * command interface. The additional half cycle, is usually - * meant to enable leveling in the situation that DQS is later - * than CK on the board.It also helps provide some additional - * margin for leveling. - */ - writel(regs->emif_ddr_phy_ctlr_1, - &emif->emif_ddr_phy_ctrl_1); - - writel(regs->emif_ddr_phy_ctlr_1, - &emif->emif_ddr_phy_ctrl_1_shdw); - __udelay(130); - - writel(((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT) - & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl); - - /* Launch Full leveling */ - writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl); - - /* Wait till full leveling is complete */ - readl(&emif->emif_rd_wr_lvl_ctl); - __udelay(130); - - /* Read data eye leveling no of samples */ - config_data_eye_leveling_samples(base); - - /* - * Launch 8 incremental WR_LVL- to compensate for - * PHY limitation. - */ - writel(0x2 << EMIF_REG_WRLVLINC_INT_SHIFT, - &emif->emif_rd_wr_lvl_ctl); - - __udelay(130); - - /* Launch Incremental leveling */ - writel(DDR3_INC_LVL, &emif->emif_rd_wr_lvl_ctl); - __udelay(130); -} - -static void update_hwleveling_output(u32 base, const struct emif_regs *regs) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - u32 *emif_ext_phy_ctrl_reg, *emif_phy_status; - u32 reg, i, phy; - - emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[7]; - phy = readl(&emif->emif_ddr_phy_ctrl_1); - - /* Update PHY_REG_RDDQS_RATIO */ - emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_7; - if (!(phy & EMIF_DDR_PHY_CTRL_1_RDLVL_MASK_MASK)) - for (i = 0; i < PHY_RDDQS_RATIO_REGS; i++) { - reg = readl(emif_phy_status++); - writel(reg, emif_ext_phy_ctrl_reg++); - writel(reg, emif_ext_phy_ctrl_reg++); - } - - /* Update PHY_REG_FIFO_WE_SLAVE_RATIO */ - emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_2; - emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[12]; - if (!(phy & EMIF_DDR_PHY_CTRL_1_RDLVLGATE_MASK_MASK)) - for (i = 0; i < PHY_FIFO_WE_SLAVE_RATIO_REGS; i++) { - reg = readl(emif_phy_status++); - writel(reg, emif_ext_phy_ctrl_reg++); - writel(reg, emif_ext_phy_ctrl_reg++); - } - - /* Update PHY_REG_WR_DQ/DQS_SLAVE_RATIO */ - emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_12; - emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[17]; - if (!(phy & EMIF_DDR_PHY_CTRL_1_WRLVL_MASK_MASK)) - for (i = 0; i < PHY_REG_WR_DQ_SLAVE_RATIO_REGS; i++) { - reg = readl(emif_phy_status++); - writel(reg, emif_ext_phy_ctrl_reg++); - writel(reg, emif_ext_phy_ctrl_reg++); - } - - /* Disable Leveling */ - writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); - writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); - writel(0x0, &emif->emif_rd_wr_lvl_rmp_ctl); -} - -static void dra7_ddr3_leveling(u32 base, const struct emif_regs *regs) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - /* Clear Error Status */ - clrsetbits_le32(&emif->emif_ddr_ext_phy_ctrl_36, - EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR, - EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR); - - clrsetbits_le32(&emif->emif_ddr_ext_phy_ctrl_36_shdw, - EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR, - EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR); - - /* Disable refreshed before leveling */ - clrsetbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK, - EMIF_REG_INITREF_DIS_MASK); - - /* Start Full leveling */ - writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl); - - __udelay(300); - - /* Check for leveling timeout */ - if (readl(&emif->emif_status) & EMIF_REG_LEVELING_TO_MASK) { - printf("Leveling timeout on EMIF%d\n", emif_num(base)); - return; - } - - /* Enable refreshes after leveling */ - clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK); - - debug("HW leveling success\n"); - /* - * Update slave ratios in EXT_PHY_CTRLx registers - * as per HW leveling output - */ - update_hwleveling_output(base, regs); -} - -static void dra7_ddr3_init(u32 base, const struct emif_regs *regs) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - if (warm_reset()) { - emif_reset_phy(base); - writel(0x0, &emif->emif_pwr_mgmt_ctrl); - } - do_ext_phy_settings(base, regs); - - writel(regs->ref_ctrl | EMIF_REG_INITREF_DIS_MASK, - &emif->emif_sdram_ref_ctrl); - /* Update timing registers */ - writel(regs->sdram_tim1, &emif->emif_sdram_tim_1); - writel(regs->sdram_tim2, &emif->emif_sdram_tim_2); - writel(regs->sdram_tim3, &emif->emif_sdram_tim_3); - - writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, &emif->emif_l3_config); - writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); - writel(regs->zq_config, &emif->emif_zq_config); - writel(regs->temp_alert_config, &emif->emif_temp_alert_config); - writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); - writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl); - - writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); - writel(regs->emif_rd_wr_exec_thresh, &emif->emif_rd_wr_exec_thresh); - - writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); - - writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); - writel(regs->sdram_config_init, &emif->emif_sdram_config); - - __udelay(1000); - - writel(regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl); - - if (regs->emif_rd_wr_lvl_rmp_ctl & EMIF_REG_RDWRLVL_EN_MASK) - dra7_ddr3_leveling(base, regs); -} - -static void omap5_ddr3_init(u32 base, const struct emif_regs *regs) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); - writel(regs->sdram_config_init, &emif->emif_sdram_config); - /* - * Set SDRAM_CONFIG and PHY control registers to locked frequency - * and RL =7. As the default values of the Mode Registers are not - * defined, contents of mode Registers must be fully initialized. - * H/W takes care of this initialization - */ - writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); - - /* Update timing registers */ - writel(regs->sdram_tim1, &emif->emif_sdram_tim_1); - writel(regs->sdram_tim2, &emif->emif_sdram_tim_2); - writel(regs->sdram_tim3, &emif->emif_sdram_tim_3); - - writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); - - writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); - writel(regs->sdram_config_init, &emif->emif_sdram_config); - do_ext_phy_settings(base, regs); - - writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); - omap5_ddr3_leveling(base, regs); -} - -static void ddr3_init(u32 base, const struct emif_regs *regs) -{ - if (is_omap54xx()) - omap5_ddr3_init(base, regs); - else - dra7_ddr3_init(base, regs); -} -#endif - -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg)) - -/* - * Organization and refresh requirements for LPDDR2 devices of different - * types and densities. Derived from JESD209-2 section 2.4 - */ -const struct lpddr2_addressing addressing_table[] = { - /* Banks tREFIx10 rowx32,rowx16 colx32,colx16 density */ - {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_7, COL_8} },/*64M */ - {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_8, COL_9} },/*128M */ - {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_8, COL_9} },/*256M */ - {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*512M */ - {BANKS8, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*1GS4 */ - {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_9, COL_10} },/*2GS4 */ - {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_10, COL_11} },/*4G */ - {BANKS8, T_REFI_3_9, {ROW_15, ROW_15}, {COL_10, COL_11} },/*8G */ - {BANKS4, T_REFI_7_8, {ROW_14, ROW_14}, {COL_9, COL_10} },/*1GS2 */ - {BANKS4, T_REFI_3_9, {ROW_15, ROW_15}, {COL_9, COL_10} },/*2GS2 */ -}; - -static const u32 lpddr2_density_2_size_in_mbytes[] = { - 8, /* 64Mb */ - 16, /* 128Mb */ - 32, /* 256Mb */ - 64, /* 512Mb */ - 128, /* 1Gb */ - 256, /* 2Gb */ - 512, /* 4Gb */ - 1024, /* 8Gb */ - 2048, /* 16Gb */ - 4096 /* 32Gb */ -}; - -/* - * Calculate the period of DDR clock from frequency value and set the - * denominator and numerator in global variables for easy access later - */ -static void set_ddr_clk_period(u32 freq) -{ - /* - * period = 1/freq - * period_in_ns = 10^9/freq - */ - *T_num = 1000000000; - *T_den = freq; - cancel_out(T_num, T_den, 200); - -} - -/* - * Convert time in nano seconds to number of cycles of DDR clock - */ -static inline u32 ns_2_cycles(u32 ns) -{ - return ((ns * (*T_den)) + (*T_num) - 1) / (*T_num); -} - -/* - * ns_2_cycles with the difference that the time passed is 2 times the actual - * value(to avoid fractions). The cycles returned is for the original value of - * the timing parameter - */ -static inline u32 ns_x2_2_cycles(u32 ns) -{ - return ((ns * (*T_den)) + (*T_num) * 2 - 1) / ((*T_num) * 2); -} - -/* - * Find addressing table index based on the device's type(S2 or S4) and - * density - */ -s8 addressing_table_index(u8 type, u8 density, u8 width) -{ - u8 index; - if ((density > LPDDR2_DENSITY_8Gb) || (width == LPDDR2_IO_WIDTH_8)) - return -1; - - /* - * Look at the way ADDR_TABLE_INDEX* values have been defined - * in emif.h compared to LPDDR2_DENSITY_* values - * The table is layed out in the increasing order of density - * (ignoring type). The exceptions 1GS2 and 2GS2 have been placed - * at the end - */ - if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_1Gb)) - index = ADDR_TABLE_INDEX1GS2; - else if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_2Gb)) - index = ADDR_TABLE_INDEX2GS2; - else - index = density; - - debug("emif: addressing table index %d\n", index); - - return index; -} - -/* - * Find the the right timing table from the array of timing - * tables of the device using DDR clock frequency - */ -static const struct lpddr2_ac_timings *get_timings_table(const struct - lpddr2_ac_timings const *const *device_timings, - u32 freq) -{ - u32 i, temp, freq_nearest; - const struct lpddr2_ac_timings *timings = 0; - - emif_assert(freq <= MAX_LPDDR2_FREQ); - emif_assert(device_timings); - - /* - * Start with the maximum allowed frequency - that is always safe - */ - freq_nearest = MAX_LPDDR2_FREQ; - /* - * Find the timings table that has the max frequency value: - * i. Above or equal to the DDR frequency - safe - * ii. The lowest that satisfies condition (i) - optimal - */ - for (i = 0; (i < MAX_NUM_SPEEDBINS) && device_timings[i]; i++) { - temp = device_timings[i]->max_freq; - if ((temp >= freq) && (temp <= freq_nearest)) { - freq_nearest = temp; - timings = device_timings[i]; - } - } - debug("emif: timings table: %d\n", freq_nearest); - return timings; -} - -/* - * Finds the value of emif_sdram_config_reg - * All parameters are programmed based on the device on CS0. - * If there is a device on CS1, it will be same as that on CS0 or - * it will be NVM. We don't support NVM yet. - * If cs1_device pointer is NULL it is assumed that there is no device - * on CS1 - */ -static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device, - const struct lpddr2_device_details *cs1_device, - const struct lpddr2_addressing *addressing, - u8 RL) -{ - u32 config_reg = 0; - - config_reg |= (cs0_device->type + 4) << EMIF_REG_SDRAM_TYPE_SHIFT; - config_reg |= EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING << - EMIF_REG_IBANK_POS_SHIFT; - - config_reg |= cs0_device->io_width << EMIF_REG_NARROW_MODE_SHIFT; - - config_reg |= RL << EMIF_REG_CL_SHIFT; - - config_reg |= addressing->row_sz[cs0_device->io_width] << - EMIF_REG_ROWSIZE_SHIFT; - - config_reg |= addressing->num_banks << EMIF_REG_IBANK_SHIFT; - - config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) << - EMIF_REG_EBANK_SHIFT; - - config_reg |= addressing->col_sz[cs0_device->io_width] << - EMIF_REG_PAGESIZE_SHIFT; - - return config_reg; -} - -static u32 get_sdram_ref_ctrl(u32 freq, - const struct lpddr2_addressing *addressing) -{ - u32 ref_ctrl = 0, val = 0, freq_khz; - freq_khz = freq / 1000; - /* - * refresh rate to be set is 'tREFI * freq in MHz - * division by 10000 to account for khz and x10 in t_REFI_us_x10 - */ - val = addressing->t_REFI_us_x10 * freq_khz / 10000; - ref_ctrl |= val << EMIF_REG_REFRESH_RATE_SHIFT; - - return ref_ctrl; -} - -static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings, - const struct lpddr2_min_tck *min_tck, - const struct lpddr2_addressing *addressing) -{ - u32 tim1 = 0, val = 0; - val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1; - tim1 |= val << EMIF_REG_T_WTR_SHIFT; - - if (addressing->num_banks == BANKS8) - val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) / - (4 * (*T_num)) - 1; - else - val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1; - - tim1 |= val << EMIF_REG_T_RRD_SHIFT; - - val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1; - tim1 |= val << EMIF_REG_T_RC_SHIFT; - - val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1; - tim1 |= val << EMIF_REG_T_RAS_SHIFT; - - val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1; - tim1 |= val << EMIF_REG_T_WR_SHIFT; - - val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1; - tim1 |= val << EMIF_REG_T_RCD_SHIFT; - - val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1; - tim1 |= val << EMIF_REG_T_RP_SHIFT; - - return tim1; -} - -static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings, - const struct lpddr2_min_tck *min_tck) -{ - u32 tim2 = 0, val = 0; - val = max(min_tck->tCKE, timings->tCKE) - 1; - tim2 |= val << EMIF_REG_T_CKE_SHIFT; - - val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1; - tim2 |= val << EMIF_REG_T_RTP_SHIFT; - - /* - * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the - * same value - */ - val = ns_2_cycles(timings->tXSR) - 1; - tim2 |= val << EMIF_REG_T_XSRD_SHIFT; - tim2 |= val << EMIF_REG_T_XSNR_SHIFT; - - val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1; - tim2 |= val << EMIF_REG_T_XP_SHIFT; - - return tim2; -} - -static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings, - const struct lpddr2_min_tck *min_tck, - const struct lpddr2_addressing *addressing) -{ - u32 tim3 = 0, val = 0; - val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF); - tim3 |= val << EMIF_REG_T_RAS_MAX_SHIFT; - - val = ns_2_cycles(timings->tRFCab) - 1; - tim3 |= val << EMIF_REG_T_RFC_SHIFT; - - val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1; - tim3 |= val << EMIF_REG_T_TDQSCKMAX_SHIFT; - - val = ns_2_cycles(timings->tZQCS) - 1; - tim3 |= val << EMIF_REG_ZQ_ZQCS_SHIFT; - - val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1; - tim3 |= val << EMIF_REG_T_CKESR_SHIFT; - - return tim3; -} - -static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device, - const struct lpddr2_addressing *addressing, - u8 volt_ramp) -{ - u32 zq = 0, val = 0; - if (volt_ramp) - val = - EMIF_ZQCS_INTERVAL_DVFS_IN_US * 10 / - addressing->t_REFI_us_x10; - else - val = - EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 / - addressing->t_REFI_us_x10; - zq |= val << EMIF_REG_ZQ_REFINTERVAL_SHIFT; - - zq |= (REG_ZQ_ZQCL_MULT - 1) << EMIF_REG_ZQ_ZQCL_MULT_SHIFT; - - zq |= (REG_ZQ_ZQINIT_MULT - 1) << EMIF_REG_ZQ_ZQINIT_MULT_SHIFT; - - zq |= REG_ZQ_SFEXITEN_ENABLE << EMIF_REG_ZQ_SFEXITEN_SHIFT; - - /* - * Assuming that two chipselects have a single calibration resistor - * If there are indeed two calibration resistors, then this flag should - * be enabled to take advantage of dual calibration feature. - * This data should ideally come from board files. But considering - * that none of the boards today have calibration resistors per CS, - * it would be an unnecessary overhead. - */ - zq |= REG_ZQ_DUALCALEN_DISABLE << EMIF_REG_ZQ_DUALCALEN_SHIFT; - - zq |= REG_ZQ_CS0EN_ENABLE << EMIF_REG_ZQ_CS0EN_SHIFT; - - zq |= (cs1_device ? 1 : 0) << EMIF_REG_ZQ_CS1EN_SHIFT; - - return zq; -} - -static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device, - const struct lpddr2_addressing *addressing, - u8 is_derated) -{ - u32 alert = 0, interval; - interval = - TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10; - if (is_derated) - interval *= 4; - alert |= interval << EMIF_REG_TA_REFINTERVAL_SHIFT; - - alert |= TEMP_ALERT_CONFIG_DEVCT_1 << EMIF_REG_TA_DEVCNT_SHIFT; - - alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << EMIF_REG_TA_DEVWDT_SHIFT; - - alert |= 1 << EMIF_REG_TA_SFEXITEN_SHIFT; - - alert |= 1 << EMIF_REG_TA_CS0EN_SHIFT; - - alert |= (cs1_device ? 1 : 0) << EMIF_REG_TA_CS1EN_SHIFT; - - return alert; -} - -static u32 get_read_idle_ctrl_reg(u8 volt_ramp) -{ - u32 idle = 0, val = 0; - if (volt_ramp) - val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1; - else - /*Maximum value in normal conditions - suggested by hw team */ - val = 0x1FF; - idle |= val << EMIF_REG_READ_IDLE_INTERVAL_SHIFT; - - idle |= EMIF_REG_READ_IDLE_LEN_VAL << EMIF_REG_READ_IDLE_LEN_SHIFT; - - return idle; -} - -static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL) -{ - u32 phy = 0, val = 0; - - phy |= (RL + 2) << EMIF_REG_READ_LATENCY_SHIFT; - - if (freq <= 100000000) - val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS; - else if (freq <= 200000000) - val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ; - else - val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ; - phy |= val << EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT; - - /* Other fields are constant magic values. Hardcode them together */ - phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL << - EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT; - - return phy; -} - -static u32 get_emif_mem_size(u32 base) -{ - u32 size_mbytes = 0, temp; - struct emif_device_details dev_details; - struct lpddr2_device_details cs0_dev_details, cs1_dev_details; - u32 emif_nr = emif_num(base); - - emif_reset_phy(base); - dev_details.cs0_device_details = emif_get_device_details(emif_nr, CS0, - &cs0_dev_details); - dev_details.cs1_device_details = emif_get_device_details(emif_nr, CS1, - &cs1_dev_details); - emif_reset_phy(base); - - if (dev_details.cs0_device_details) { - temp = dev_details.cs0_device_details->density; - size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; - } - - if (dev_details.cs1_device_details) { - temp = dev_details.cs1_device_details->density; - size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; - } - /* convert to bytes */ - return size_mbytes << 20; -} - -/* Gets the encoding corresponding to a given DMM section size */ -u32 get_dmm_section_size_map(u32 section_size) -{ - /* - * Section size mapping: - * 0x0: 16-MiB section - * 0x1: 32-MiB section - * 0x2: 64-MiB section - * 0x3: 128-MiB section - * 0x4: 256-MiB section - * 0x5: 512-MiB section - * 0x6: 1-GiB section - * 0x7: 2-GiB section - */ - section_size >>= 24; /* divide by 16 MB */ - return log_2_n_round_down(section_size); -} - -static void emif_calculate_regs( - const struct emif_device_details *emif_dev_details, - u32 freq, struct emif_regs *regs) -{ - u32 temp, sys_freq; - const struct lpddr2_addressing *addressing; - const struct lpddr2_ac_timings *timings; - const struct lpddr2_min_tck *min_tck; - const struct lpddr2_device_details *cs0_dev_details = - emif_dev_details->cs0_device_details; - const struct lpddr2_device_details *cs1_dev_details = - emif_dev_details->cs1_device_details; - const struct lpddr2_device_timings *cs0_dev_timings = - emif_dev_details->cs0_device_timings; - - emif_assert(emif_dev_details); - emif_assert(regs); - /* - * You can not have a device on CS1 without one on CS0 - * So configuring EMIF without a device on CS0 doesn't - * make sense - */ - emif_assert(cs0_dev_details); - emif_assert(cs0_dev_details->type != LPDDR2_TYPE_NVM); - /* - * If there is a device on CS1 it should be same type as CS0 - * (or NVM. But NVM is not supported in this driver yet) - */ - emif_assert((cs1_dev_details == NULL) || - (cs1_dev_details->type == LPDDR2_TYPE_NVM) || - (cs0_dev_details->type == cs1_dev_details->type)); - emif_assert(freq <= MAX_LPDDR2_FREQ); - - set_ddr_clk_period(freq); - - /* - * The device on CS0 is used for all timing calculations - * There is only one set of registers for timings per EMIF. So, if the - * second CS(CS1) has a device, it should have the same timings as the - * device on CS0 - */ - timings = get_timings_table(cs0_dev_timings->ac_timings, freq); - emif_assert(timings); - min_tck = cs0_dev_timings->min_tck; - - temp = addressing_table_index(cs0_dev_details->type, - cs0_dev_details->density, - cs0_dev_details->io_width); - - emif_assert((temp >= 0)); - addressing = &(addressing_table[temp]); - emif_assert(addressing); - - sys_freq = get_sys_clk_freq(); - - regs->sdram_config_init = get_sdram_config_reg(cs0_dev_details, - cs1_dev_details, - addressing, RL_BOOT); - - regs->sdram_config = get_sdram_config_reg(cs0_dev_details, - cs1_dev_details, - addressing, RL_FINAL); - - regs->ref_ctrl = get_sdram_ref_ctrl(freq, addressing); - - regs->sdram_tim1 = get_sdram_tim_1_reg(timings, min_tck, addressing); - - regs->sdram_tim2 = get_sdram_tim_2_reg(timings, min_tck); - - regs->sdram_tim3 = get_sdram_tim_3_reg(timings, min_tck, addressing); - - regs->read_idle_ctrl = get_read_idle_ctrl_reg(LPDDR2_VOLTAGE_STABLE); - - regs->temp_alert_config = - get_temp_alert_config(cs1_dev_details, addressing, 0); - - regs->zq_config = get_zq_config_reg(cs1_dev_details, addressing, - LPDDR2_VOLTAGE_STABLE); - - regs->emif_ddr_phy_ctlr_1_init = - get_ddr_phy_ctrl_1(sys_freq / 2, RL_BOOT); - - regs->emif_ddr_phy_ctlr_1 = - get_ddr_phy_ctrl_1(freq, RL_FINAL); - - regs->freq = freq; - - print_timing_reg(regs->sdram_config_init); - print_timing_reg(regs->sdram_config); - print_timing_reg(regs->ref_ctrl); - print_timing_reg(regs->sdram_tim1); - print_timing_reg(regs->sdram_tim2); - print_timing_reg(regs->sdram_tim3); - print_timing_reg(regs->read_idle_ctrl); - print_timing_reg(regs->temp_alert_config); - print_timing_reg(regs->zq_config); - print_timing_reg(regs->emif_ddr_phy_ctlr_1); - print_timing_reg(regs->emif_ddr_phy_ctlr_1_init); -} -#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ - -#ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -const char *get_lpddr2_type(u8 type_id) -{ - switch (type_id) { - case LPDDR2_TYPE_S4: - return "LPDDR2-S4"; - case LPDDR2_TYPE_S2: - return "LPDDR2-S2"; - default: - return NULL; - } -} - -const char *get_lpddr2_io_width(u8 width_id) -{ - switch (width_id) { - case LPDDR2_IO_WIDTH_8: - return "x8"; - case LPDDR2_IO_WIDTH_16: - return "x16"; - case LPDDR2_IO_WIDTH_32: - return "x32"; - default: - return NULL; - } -} - -const char *get_lpddr2_manufacturer(u32 manufacturer) -{ - switch (manufacturer) { - case LPDDR2_MANUFACTURER_SAMSUNG: - return "Samsung"; - case LPDDR2_MANUFACTURER_QIMONDA: - return "Qimonda"; - case LPDDR2_MANUFACTURER_ELPIDA: - return "Elpida"; - case LPDDR2_MANUFACTURER_ETRON: - return "Etron"; - case LPDDR2_MANUFACTURER_NANYA: - return "Nanya"; - case LPDDR2_MANUFACTURER_HYNIX: - return "Hynix"; - case LPDDR2_MANUFACTURER_MOSEL: - return "Mosel"; - case LPDDR2_MANUFACTURER_WINBOND: - return "Winbond"; - case LPDDR2_MANUFACTURER_ESMT: - return "ESMT"; - case LPDDR2_MANUFACTURER_SPANSION: - return "Spansion"; - case LPDDR2_MANUFACTURER_SST: - return "SST"; - case LPDDR2_MANUFACTURER_ZMOS: - return "ZMOS"; - case LPDDR2_MANUFACTURER_INTEL: - return "Intel"; - case LPDDR2_MANUFACTURER_NUMONYX: - return "Numonyx"; - case LPDDR2_MANUFACTURER_MICRON: - return "Micron"; - default: - return NULL; - } -} - -static void display_sdram_details(u32 emif_nr, u32 cs, - struct lpddr2_device_details *device) -{ - const char *mfg_str; - const char *type_str; - char density_str[10]; - u32 density; - - debug("EMIF%d CS%d\t", emif_nr, cs); - - if (!device) { - debug("None\n"); - return; - } - - mfg_str = get_lpddr2_manufacturer(device->manufacturer); - type_str = get_lpddr2_type(device->type); - - density = lpddr2_density_2_size_in_mbytes[device->density]; - if ((density / 1024 * 1024) == density) { - density /= 1024; - sprintf(density_str, "%d GB", density); - } else - sprintf(density_str, "%d MB", density); - if (mfg_str && type_str) - debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str); -} - -static u8 is_lpddr2_sdram_present(u32 base, u32 cs, - struct lpddr2_device_details *lpddr2_device) -{ - u32 mr = 0, temp; - - mr = get_mr(base, cs, LPDDR2_MR0); - if (mr > 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - temp = (mr & LPDDR2_MR0_DI_MASK) >> LPDDR2_MR0_DI_SHIFT; - if (temp) { - /* Not SDRAM */ - return 0; - } - temp = (mr & LPDDR2_MR0_DNVI_MASK) >> LPDDR2_MR0_DNVI_SHIFT; - - if (temp) { - /* DNV supported - But DNV is only supported for NVM */ - return 0; - } - - mr = get_mr(base, cs, LPDDR2_MR4); - if (mr > 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - mr = get_mr(base, cs, LPDDR2_MR5); - if (mr > 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - if (!get_lpddr2_manufacturer(mr)) { - /* Manufacturer not identified */ - return 0; - } - lpddr2_device->manufacturer = mr; - - mr = get_mr(base, cs, LPDDR2_MR6); - if (mr >= 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - mr = get_mr(base, cs, LPDDR2_MR7); - if (mr >= 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - mr = get_mr(base, cs, LPDDR2_MR8); - if (mr >= 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - temp = (mr & MR8_TYPE_MASK) >> MR8_TYPE_SHIFT; - if (!get_lpddr2_type(temp)) { - /* Not SDRAM */ - return 0; - } - lpddr2_device->type = temp; - - temp = (mr & MR8_DENSITY_MASK) >> MR8_DENSITY_SHIFT; - if (temp > LPDDR2_DENSITY_32Gb) { - /* Density not supported */ - return 0; - } - lpddr2_device->density = temp; - - temp = (mr & MR8_IO_WIDTH_MASK) >> MR8_IO_WIDTH_SHIFT; - if (!get_lpddr2_io_width(temp)) { - /* IO width unsupported value */ - return 0; - } - lpddr2_device->io_width = temp; - - /* - * If all the above tests pass we should - * have a device on this chip-select - */ - return 1; -} - -struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, - struct lpddr2_device_details *lpddr2_dev_details) -{ - u32 phy; - u32 base = (emif_nr == 1) ? EMIF1_BASE : EMIF2_BASE; - - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - if (!lpddr2_dev_details) - return NULL; - - /* Do the minimum init for mode register accesses */ - if (!(running_from_sdram() || warm_reset())) { - phy = get_ddr_phy_ctrl_1(get_sys_clk_freq() / 2, RL_BOOT); - writel(phy, &emif->emif_ddr_phy_ctrl_1); - } - - if (!(is_lpddr2_sdram_present(base, cs, lpddr2_dev_details))) - return NULL; - - display_sdram_details(emif_num(base), cs, lpddr2_dev_details); - - return lpddr2_dev_details; -} -#endif /* CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION */ - -static void do_sdram_init(u32 base) -{ - const struct emif_regs *regs; - u32 in_sdram, emif_nr; - - debug(">>do_sdram_init() %x\n", base); - - in_sdram = running_from_sdram(); - emif_nr = (base == EMIF1_BASE) ? 1 : 2; - -#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - emif_get_reg_dump(emif_nr, ®s); - if (!regs) { - debug("EMIF: reg dump not provided\n"); - return; - } -#else - /* - * The user has not provided the register values. We need to - * calculate it based on the timings and the DDR frequency - */ - struct emif_device_details dev_details; - struct emif_regs calculated_regs; - - /* - * Get device details: - * - Discovered if CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION is set - * - Obtained from user otherwise - */ - struct lpddr2_device_details cs0_dev_details, cs1_dev_details; - emif_reset_phy(base); - dev_details.cs0_device_details = emif_get_device_details(emif_nr, CS0, - &cs0_dev_details); - dev_details.cs1_device_details = emif_get_device_details(emif_nr, CS1, - &cs1_dev_details); - emif_reset_phy(base); - - /* Return if no devices on this EMIF */ - if (!dev_details.cs0_device_details && - !dev_details.cs1_device_details) { - return; - } - - /* - * Get device timings: - * - Default timings specified by JESD209-2 if - * CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS is set - * - Obtained from user otherwise - */ - emif_get_device_timings(emif_nr, &dev_details.cs0_device_timings, - &dev_details.cs1_device_timings); - - /* Calculate the register values */ - emif_calculate_regs(&dev_details, omap_ddr_clk(), &calculated_regs); - regs = &calculated_regs; -#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ - - /* - * Initializing the DDR device can not happen from SDRAM. - * Changing the timing registers in EMIF can happen(going from one - * OPP to another) - */ - if (!in_sdram && (!warm_reset() || is_dra7xx())) { - if (emif_sdram_type(regs->sdram_config) == - EMIF_SDRAM_TYPE_LPDDR2) - lpddr2_init(base, regs); -#ifndef CONFIG_OMAP44XX - else - ddr3_init(base, regs); -#endif - } -#ifdef CONFIG_OMAP54X - if (warm_reset() && (emif_sdram_type(regs->sdram_config) == - EMIF_SDRAM_TYPE_DDR3) && !is_dra7xx()) { - set_lpmode_selfrefresh(base); - emif_reset_phy(base); - omap5_ddr3_leveling(base, regs); - } -#endif - - /* Write to the shadow registers */ - emif_update_timings(base, regs); - - debug("<emif_pwr_mgmt_ctrl); -} - -void dmm_init(u32 base) -{ - const struct dmm_lisa_map_regs *lisa_map_regs; - u32 i, section, valid; - -#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - emif_get_dmm_regs(&lisa_map_regs); -#else - u32 emif1_size, emif2_size, mapped_size, section_map = 0; - u32 section_cnt, sys_addr; - struct dmm_lisa_map_regs lis_map_regs_calculated = {0}; - - mapped_size = 0; - section_cnt = 3; - sys_addr = CONFIG_SYS_SDRAM_BASE; - emif1_size = get_emif_mem_size(EMIF1_BASE); - emif2_size = get_emif_mem_size(EMIF2_BASE); - debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size); - - if (!emif1_size && !emif2_size) - return; - - /* symmetric interleaved section */ - if (emif1_size && emif2_size) { - mapped_size = min(emif1_size, emif2_size); - section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL; - section_map |= 0 << EMIF_SDRC_ADDR_SHIFT; - /* only MSB */ - section_map |= (sys_addr >> 24) << - EMIF_SYS_ADDR_SHIFT; - section_map |= get_dmm_section_size_map(mapped_size * 2) - << EMIF_SYS_SIZE_SHIFT; - lis_map_regs_calculated.dmm_lisa_map_3 = section_map; - emif1_size -= mapped_size; - emif2_size -= mapped_size; - sys_addr += (mapped_size * 2); - section_cnt--; - } - - /* - * Single EMIF section(we can have a maximum of 1 single EMIF - * section- either EMIF1 or EMIF2 or none, but not both) - */ - if (emif1_size) { - section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL; - section_map |= get_dmm_section_size_map(emif1_size) - << EMIF_SYS_SIZE_SHIFT; - /* only MSB */ - section_map |= (mapped_size >> 24) << - EMIF_SDRC_ADDR_SHIFT; - /* only MSB */ - section_map |= (sys_addr >> 24) << EMIF_SYS_ADDR_SHIFT; - section_cnt--; - } - if (emif2_size) { - section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL; - section_map |= get_dmm_section_size_map(emif2_size) << - EMIF_SYS_SIZE_SHIFT; - /* only MSB */ - section_map |= mapped_size >> 24 << EMIF_SDRC_ADDR_SHIFT; - /* only MSB */ - section_map |= sys_addr >> 24 << EMIF_SYS_ADDR_SHIFT; - section_cnt--; - } - - if (section_cnt == 2) { - /* Only 1 section - either symmetric or single EMIF */ - lis_map_regs_calculated.dmm_lisa_map_3 = section_map; - lis_map_regs_calculated.dmm_lisa_map_2 = 0; - lis_map_regs_calculated.dmm_lisa_map_1 = 0; - } else { - /* 2 sections - 1 symmetric, 1 single EMIF */ - lis_map_regs_calculated.dmm_lisa_map_2 = section_map; - lis_map_regs_calculated.dmm_lisa_map_1 = 0; - } - - /* TRAP for invalid TILER mappings in section 0 */ - lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP; - - if (omap_revision() >= OMAP4460_ES1_0) - lis_map_regs_calculated.is_ma_present = 1; - - lisa_map_regs = &lis_map_regs_calculated; -#endif - struct dmm_lisa_map_regs *hw_lisa_map_regs = - (struct dmm_lisa_map_regs *)base; - - writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); - - writel(lisa_map_regs->dmm_lisa_map_3, - &hw_lisa_map_regs->dmm_lisa_map_3); - writel(lisa_map_regs->dmm_lisa_map_2, - &hw_lisa_map_regs->dmm_lisa_map_2); - writel(lisa_map_regs->dmm_lisa_map_1, - &hw_lisa_map_regs->dmm_lisa_map_1); - writel(lisa_map_regs->dmm_lisa_map_0, - &hw_lisa_map_regs->dmm_lisa_map_0); - - if (lisa_map_regs->is_ma_present) { - hw_lisa_map_regs = - (struct dmm_lisa_map_regs *)MA_BASE; - - writel(lisa_map_regs->dmm_lisa_map_3, - &hw_lisa_map_regs->dmm_lisa_map_3); - writel(lisa_map_regs->dmm_lisa_map_2, - &hw_lisa_map_regs->dmm_lisa_map_2); - writel(lisa_map_regs->dmm_lisa_map_1, - &hw_lisa_map_regs->dmm_lisa_map_1); - writel(lisa_map_regs->dmm_lisa_map_0, - &hw_lisa_map_regs->dmm_lisa_map_0); - - setbits_le32(MA_PRIORITY, MA_HIMEM_INTERLEAVE_UN_MASK); - } - - /* - * EMIF should be configured only when - * memory is mapped on it. Using emif1_enabled - * and emif2_enabled variables for this. - */ - emif1_enabled = 0; - emif2_enabled = 0; - for (i = 0; i < 4; i++) { - section = __raw_readl(DMM_BASE + i*4); - valid = (section & EMIF_SDRC_MAP_MASK) >> - (EMIF_SDRC_MAP_SHIFT); - if (valid == 3) { - emif1_enabled = 1; - emif2_enabled = 1; - break; - } - - if (valid == 1) - emif1_enabled = 1; - - if (valid == 2) - emif2_enabled = 1; - } -} - -static void do_bug0039_workaround(u32 base) -{ - u32 val, i, clkctrl; - struct emif_reg_struct *emif_base = (struct emif_reg_struct *)base; - const struct read_write_regs *bug_00339_regs; - u32 iterations; - u32 *phy_status_base = &emif_base->emif_ddr_phy_status[0]; - u32 *phy_ctrl_base = &emif_base->emif_ddr_ext_phy_ctrl_1; - - if (is_dra7xx()) - phy_status_base++; - - bug_00339_regs = get_bug_regs(&iterations); - - /* Put EMIF in to idle */ - clkctrl = __raw_readl((*prcm)->cm_memif_clkstctrl); - __raw_writel(0x0, (*prcm)->cm_memif_clkstctrl); - - /* Copy the phy status registers in to phy ctrl shadow registers */ - for (i = 0; i < iterations; i++) { - val = __raw_readl(phy_status_base + - bug_00339_regs[i].read_reg - 1); - - __raw_writel(val, phy_ctrl_base + - ((bug_00339_regs[i].write_reg - 1) << 1)); - - __raw_writel(val, phy_ctrl_base + - (bug_00339_regs[i].write_reg << 1) - 1); - } - - /* Disable leveling */ - writel(0x0, &emif_base->emif_rd_wr_lvl_rmp_ctl); - - __raw_writel(clkctrl, (*prcm)->cm_memif_clkstctrl); -} - -/* - * SDRAM initialization: - * SDRAM initialization has two parts: - * 1. Configuring the SDRAM device - * 2. Update the AC timings related parameters in the EMIF module - * (1) should be done only once and should not be done while we are - * running from SDRAM. - * (2) can and should be done more than once if OPP changes. - * Particularly, this may be needed when we boot without SPL and - * and using Configuration Header(CH). ROM code supports only at 50% OPP - * at boot (low power boot). So u-boot has to switch to OPP100 and update - * the frequency. So, - * Doing (1) and (2) makes sense - first time initialization - * Doing (2) and not (1) makes sense - OPP change (when using CH) - * Doing (1) and not (2) doen't make sense - * See do_sdram_init() for the details - */ -void sdram_init(void) -{ - u32 in_sdram, size_prog, size_detect; - struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; - u32 sdram_type = emif_sdram_type(emif->emif_sdram_config); - - debug(">>sdram_init()\n"); - - if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL) - return; - - in_sdram = running_from_sdram(); - debug("in_sdram = %d\n", in_sdram); - - if (!in_sdram) { - if ((sdram_type == EMIF_SDRAM_TYPE_LPDDR2) && !warm_reset()) - bypass_dpll((*prcm)->cm_clkmode_dpll_core); - else if (sdram_type == EMIF_SDRAM_TYPE_DDR3) - writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl); - } - - if (!in_sdram) - dmm_init(DMM_BASE); - - if (emif1_enabled) - do_sdram_init(EMIF1_BASE); - - if (emif2_enabled) - do_sdram_init(EMIF2_BASE); - - if (!(in_sdram || warm_reset())) { - if (emif1_enabled) - emif_post_init_config(EMIF1_BASE); - if (emif2_enabled) - emif_post_init_config(EMIF2_BASE); - } - - /* for the shadow registers to take effect */ - if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2) - freq_update_core(); - - /* Do some testing after the init */ - if (!in_sdram) { - size_prog = omap_sdram_size(); - size_prog = log_2_n_round_down(size_prog); - size_prog = (1 << size_prog); - - size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - size_prog); - /* Compare with the size programmed */ - if (size_detect != size_prog) { - printf("SDRAM: identified size not same as expected" - " size identified: %x expected: %x\n", - size_detect, - size_prog); - } else - debug("get_ram_size() successful"); - } - -#if defined(CONFIG_TI_SECURE_DEVICE) - /* - * On HS devices, do static EMIF firewall configuration - * but only do it if not already running in SDRAM - */ - if (!in_sdram) - if (0 != secure_emif_reserve()) - hang(); - - /* On HS devices, ensure static EMIF firewall APIs are locked */ - if (0 != secure_emif_firewall_lock()) - hang(); -#endif - - if (sdram_type == EMIF_SDRAM_TYPE_DDR3 && - (!in_sdram && !warm_reset()) && (!is_dra7xx())) { - if (emif1_enabled) - do_bug0039_workaround(EMIF1_BASE); - if (emif2_enabled) - do_bug0039_workaround(EMIF2_BASE); - } - - debug("< - * - * Author : - * Aneesh V - * Steve Sakoman - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -void do_set_mux(u32 base, struct pad_conf_entry const *array, int size) -{ - int i; - struct pad_conf_entry *pad = (struct pad_conf_entry *) array; - - for (i = 0; i < size; i++, pad++) - writew(pad->val, base + pad->offset); -} - -static void set_mux_conf_regs(void) -{ - switch (omap_hw_init_context()) { - case OMAP_INIT_CONTEXT_SPL: - set_muxconf_regs(); - break; - case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL: - break; - case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: - case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: - set_muxconf_regs(); - break; - } -} - -u32 cortex_rev(void) -{ - - unsigned int rev; - - /* Read Main ID Register (MIDR) */ - asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev)); - - return rev; -} - -static void omap_rev_string(void) -{ - u32 omap_rev = omap_revision(); - u32 soc_variant = (omap_rev & 0xF0000000) >> 28; - u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16; - u32 major_rev = (omap_rev & 0x00000F00) >> 8; - u32 minor_rev = (omap_rev & 0x000000F0) >> 4; - - const char *sec_s; - - switch (get_device_type()) { - case TST_DEVICE: - sec_s = "TST"; - break; - case EMU_DEVICE: - sec_s = "EMU"; - break; - case HS_DEVICE: - sec_s = "HS"; - break; - case GP_DEVICE: - sec_s = "GP"; - break; - default: - sec_s = "?"; - } - - if (soc_variant) - printf("OMAP"); - else - printf("DRA"); - printf("%x-%s ES%x.%x\n", omap_variant, sec_s, major_rev, minor_rev); -} - -#ifdef CONFIG_SPL_BUILD -void spl_display_print(void) -{ - omap_rev_string(); -} -#endif - -void __weak srcomp_enable(void) -{ -} - -/** - * do_board_detect() - Detect board description - * - * Function to detect board description. This is expected to be - * overridden in the SoC family board file where desired. - */ -void __weak do_board_detect(void) -{ -} - -/** - * vcores_init() - Assign omap_vcores based on board - * - * Function to pick the vcores based on board. This is expected to be - * overridden in the SoC family board file where desired. - */ -void __weak vcores_init(void) -{ -} - -void s_init(void) -{ -} - -/** - * early_system_init - Does Early system initialization. - * - * Does early system init of watchdog, muxing, andclocks - * Watchdog disable is done always. For the rest what gets done - * depends on the boot mode in which this function is executed when - * 1. SPL running from SRAM - * 2. U-Boot running from FLASH - * 3. U-Boot loaded to SDRAM by SPL - * 4. U-Boot loaded to SDRAM by ROM code using the - * Configuration Header feature - * Please have a look at the respective functions to see what gets - * done in each of these cases - * This function is called with SRAM stack. - */ -void early_system_init(void) -{ - init_omap_revision(); - hw_data_init(); - -#ifdef CONFIG_SPL_BUILD - if (warm_reset()) - force_emif_self_refresh(); -#endif - watchdog_init(); - set_mux_conf_regs(); -#ifdef CONFIG_SPL_BUILD - srcomp_enable(); - do_io_settings(); -#endif - setup_early_clocks(); - do_board_detect(); - vcores_init(); - prcm_init(); -} - -#ifdef CONFIG_SPL_BUILD -void board_init_f(ulong dummy) -{ - early_system_init(); -#ifdef CONFIG_BOARD_EARLY_INIT_F - board_early_init_f(); -#endif - /* For regular u-boot sdram_init() is called from dram_init() */ - sdram_init(); -} -#endif - -int arch_cpu_init_dm(void) -{ - early_system_init(); - return 0; -} - -/* - * Routine: wait_for_command_complete - * Description: Wait for posting to finish on watchdog - */ -void wait_for_command_complete(struct watchdog *wd_base) -{ - int pending = 1; - do { - pending = readl(&wd_base->wwps); - } while (pending); -} - -/* - * Routine: watchdog_init - * Description: Shut down watch dogs - */ -void watchdog_init(void) -{ - struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE; - - writel(WD_UNLOCK1, &wd2_base->wspr); - wait_for_command_complete(wd2_base); - writel(WD_UNLOCK2, &wd2_base->wspr); -} - - -/* - * This function finds the SDRAM size available in the system - * based on DMM section configurations - * This is needed because the size of memory installed may be - * different on different versions of the board - */ -u32 omap_sdram_size(void) -{ - u32 section, i, valid; - u64 sdram_start = 0, sdram_end = 0, addr, - size, total_size = 0, trap_size = 0, trap_start = 0; - - for (i = 0; i < 4; i++) { - section = __raw_readl(DMM_BASE + i*4); - valid = (section & EMIF_SDRC_ADDRSPC_MASK) >> - (EMIF_SDRC_ADDRSPC_SHIFT); - addr = section & EMIF_SYS_ADDR_MASK; - - /* See if the address is valid */ - if ((addr >= TI_ARMV7_DRAM_ADDR_SPACE_START) && - (addr < TI_ARMV7_DRAM_ADDR_SPACE_END)) { - size = ((section & EMIF_SYS_SIZE_MASK) >> - EMIF_SYS_SIZE_SHIFT); - size = 1 << size; - size *= SZ_16M; - - if (valid != DMM_SDRC_ADDR_SPC_INVALID) { - if (!sdram_start || (addr < sdram_start)) - sdram_start = addr; - if (!sdram_end || ((addr + size) > sdram_end)) - sdram_end = addr + size; - } else { - trap_size = size; - trap_start = addr; - } - } - } - - if ((trap_start >= sdram_start) && (trap_start < sdram_end)) - total_size = (sdram_end - sdram_start) - (trap_size); - else - total_size = sdram_end - sdram_start; - - return total_size; -} - - -/* - * Routine: dram_init - * Description: sets uboots idea of sdram size - */ -int dram_init(void) -{ - sdram_init(); - gd->ram_size = omap_sdram_size(); - return 0; -} - -/* - * Print board information - */ -int checkboard(void) -{ - puts(sysinfo.board_string); - return 0; -} - -/* - * get_device_type(): tell if GP/HS/EMU/TST - */ -u32 get_device_type(void) -{ - return (readl((*ctrl)->control_status) & - (DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT; -} - -#if defined(CONFIG_DISPLAY_CPUINFO) -/* - * Print CPU information - */ -int print_cpuinfo(void) -{ - puts("CPU : "); - omap_rev_string(); - - return 0; -} -#endif diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S deleted file mode 100644 index 8ce12c8..0000000 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2010 - * Texas Instruments, - * - * Author : - * Aneesh V - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -.arch_extension sec - -#ifdef CONFIG_SPL -ENTRY(save_boot_params) - ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS - str r0, [r1] - b save_boot_params_ret -ENDPROC(save_boot_params) - -#if !defined(CONFIG_TI_SECURE_DEVICE) && defined(CONFIG_ARMV7_LPAE) -ENTRY(switch_to_hypervisor) - -/* - * Switch to hypervisor mode - */ - adr r0, save_sp - str sp, [r0] - adr r1, restore_from_hyp - ldr r0, =0x102 - b omap_smc1 -restore_from_hyp: - adr r0, save_sp - ldr sp, [r0] - MRC p15, 4, R0, c1, c0, 0 - ldr r1, =0X1004 @Set cache enable bits for hypervisor mode - orr r0, r0, r1 - MCR p15, 4, R0, c1, c0, 0 - b switch_to_hypervisor_ret -save_sp: - .word 0x0 -ENDPROC(switch_to_hypervisor) -#endif -#endif - -ENTRY(omap_smc1) - push {r4-r12, lr} @ save registers - ROM code may pollute - @ our registers - mov r12, r0 @ Service - mov r0, r1 @ Argument - - dsb - dmb - smc 0 @ SMC #0 to enter monitor mode - @ call ROM Code API for the service requested - pop {r4-r12, pc} -ENDPROC(omap_smc1) - -ENTRY(omap_smc_sec) - push {r4-r12, lr} @ save registers - ROM code may pollute - @ our registers - mov r6, #0xFF @ Indicate new Task call - mov r12, #0x00 @ Secure Service ID in R12 - - dsb - dmb - smc 0 @ SMC #0 to enter monitor mode - - b omap_smc_sec_end @ exit at end of the service execution - nop - - @ In case of IRQ happening in Secure, then ARM will branch here. - @ At that moment, IRQ will be pending and ARM will jump to Non Secure - @ IRQ handler - mov r12, #0xFE - - dsb - dmb - smc 0 @ SMC #0 to enter monitor mode - -omap_smc_sec_end: - pop {r4-r12, pc} -ENDPROC(omap_smc_sec) diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/cpu/armv7/omap-common/mem-common.c deleted file mode 100644 index d72e82e..0000000 --- a/arch/arm/cpu/armv7/omap-common/mem-common.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * (C) Copyright 2010 - * Texas Instruments, - * - * Author : - * Mansoor Ahamed - * - * Initial Code from: - * Manikandan Pillai - * Richard Woodruff - * Syed Mohammed Khasim - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -const struct gpmc *gpmc_cfg = (struct gpmc *)GPMC_BASE; - -#if defined(CONFIG_NOR) -char gpmc_cs0_flash = MTD_DEV_TYPE_NOR; -#elif defined(CONFIG_NAND) || defined(CONFIG_CMD_NAND) -char gpmc_cs0_flash = MTD_DEV_TYPE_NAND; -#elif defined(CONFIG_CMD_ONENAND) -char gpmc_cs0_flash = MTD_DEV_TYPE_ONENAND; -#else -char gpmc_cs0_flash = -1; -#endif - -#if defined(CONFIG_OMAP34XX) -/******************************************************** - * mem_ok() - test used to see if timings are correct - * for a part. Helps in guessing which part - * we are currently using. - *******************************************************/ -u32 mem_ok(u32 cs) -{ - u32 val1, val2, addr; - u32 pattern = 0x12345678; - - addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs); - - writel(0x0, addr + 0x400); /* clear pos A */ - writel(pattern, addr); /* pattern to pos B */ - writel(0x0, addr + 4); /* remove pattern off the bus */ - val1 = readl(addr + 0x400); /* get pos A value */ - val2 = readl(addr); /* get val2 */ - writel(0x0, addr + 0x400); /* clear pos A */ - - if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */ - return 0; - else - return 1; -} -#endif - -void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs, - u32 base, u32 size) -{ - writel(0, &cs->config7); - sdelay(1000); - /* Delay for settling */ - writel(gpmc_config[0], &cs->config1); - writel(gpmc_config[1], &cs->config2); - writel(gpmc_config[2], &cs->config3); - writel(gpmc_config[3], &cs->config4); - writel(gpmc_config[4], &cs->config5); - writel(gpmc_config[5], &cs->config6); - /* Enable the config */ - writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) | - (1 << 6)), &cs->config7); - sdelay(2000); -} - -void set_gpmc_cs0(int flash_type) -{ - const u32 *gpmc_regs; - u32 base, size; -#if defined(CONFIG_NOR) - const u32 gpmc_regs_nor[GPMC_MAX_REG] = { - STNOR_GPMC_CONFIG1, - STNOR_GPMC_CONFIG2, - STNOR_GPMC_CONFIG3, - STNOR_GPMC_CONFIG4, - STNOR_GPMC_CONFIG5, - STNOR_GPMC_CONFIG6, - STNOR_GPMC_CONFIG7 - }; -#endif -#if defined(CONFIG_NAND) || defined(CONFIG_CMD_NAND) - const u32 gpmc_regs_nand[GPMC_MAX_REG] = { - M_NAND_GPMC_CONFIG1, - M_NAND_GPMC_CONFIG2, - M_NAND_GPMC_CONFIG3, - M_NAND_GPMC_CONFIG4, - M_NAND_GPMC_CONFIG5, - M_NAND_GPMC_CONFIG6, - 0 - }; -#endif -#if defined(CONFIG_CMD_ONENAND) - const u32 gpmc_regs_onenand[GPMC_MAX_REG] = { - ONENAND_GPMC_CONFIG1, - ONENAND_GPMC_CONFIG2, - ONENAND_GPMC_CONFIG3, - ONENAND_GPMC_CONFIG4, - ONENAND_GPMC_CONFIG5, - ONENAND_GPMC_CONFIG6, - 0 - }; -#endif - - switch (flash_type) { -#if defined(CONFIG_NOR) - case MTD_DEV_TYPE_NOR: - gpmc_regs = gpmc_regs_nor; - base = CONFIG_SYS_FLASH_BASE; - size = (CONFIG_SYS_FLASH_SIZE > 0x08000000) ? GPMC_SIZE_256M : - ((CONFIG_SYS_FLASH_SIZE > 0x04000000) ? GPMC_SIZE_128M : - ((CONFIG_SYS_FLASH_SIZE > 0x02000000) ? GPMC_SIZE_64M : - ((CONFIG_SYS_FLASH_SIZE > 0x01000000) ? GPMC_SIZE_32M : - GPMC_SIZE_16M))); - break; -#endif -#if defined(CONFIG_NAND) || defined(CONFIG_CMD_NAND) - case MTD_DEV_TYPE_NAND: - gpmc_regs = gpmc_regs_nand; - base = CONFIG_SYS_NAND_BASE; - size = GPMC_SIZE_16M; - break; -#endif -#if defined(CONFIG_CMD_ONENAND) - case MTD_DEV_TYPE_ONENAND: - gpmc_regs = gpmc_regs_onenand; - base = CONFIG_SYS_ONENAND_BASE; - size = GPMC_SIZE_128M; - break; -#endif - default: - /* disable the GPMC0 config set by ROM code */ - writel(0, &gpmc_cfg->cs[0].config7); - sdelay(1000); - return; - } - - /* enable chip-select specific configurations */ - enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size); -} - -/***************************************************** - * gpmc_init(): init gpmc bus - * Init GPMC for x16, MuxMode (SDRAM in x32). - * This code can only be executed from SRAM or SDRAM. - *****************************************************/ -void gpmc_init(void) -{ - /* global settings */ - writel(0x00000008, &gpmc_cfg->sysconfig); - writel(0x00000000, &gpmc_cfg->irqstatus); - writel(0x00000000, &gpmc_cfg->irqenable); - /* disable timeout, set a safe reset value */ - writel(0x00001ff0, &gpmc_cfg->timeout_control); - writel(gpmc_cs0_flash == MTD_DEV_TYPE_NOR ? - 0x00000200 : 0x00000012, &gpmc_cfg->config); - - set_gpmc_cs0(gpmc_cs0_flash); -} diff --git a/arch/arm/cpu/armv7/omap-common/omap-cache.c b/arch/arm/cpu/armv7/omap-common/omap-cache.c deleted file mode 100644 index b37163a..0000000 --- a/arch/arm/cpu/armv7/omap-common/omap-cache.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * - * Common functions for OMAP4/5 based boards - * - * (C) Copyright 2010 - * Texas Instruments, - * - * Author : - * Aneesh V - * Steve Sakoman - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Without LPAE short descriptors are used - * Set C - Cache Bit3 - * Set B - Buffer Bit2 - * The last 2 bits set to 0b10 - * Do Not set XN bit4 - * So value is 0xe - * - * With LPAE cache configuration happens via MAIR0 register - * AttrIndx value is 0x3 for picking byte3 for MAIR0 which has 0xFF. - * 0xFF maps to Cache writeback with Read and Write Allocate set - * The bits[1:0] should have the value 0b01 for the first level - * descriptor. - * So the value is 0xd - */ - -#ifdef CONFIG_ARMV7_LPAE -#define ARMV7_DCACHE_POLICY DCACHE_WRITEALLOC -#else -#define ARMV7_DCACHE_POLICY DCACHE_WRITEBACK & ~TTB_SECT_XN_MASK -#endif - -#define ARMV7_DOMAIN_CLIENT 1 -#define ARMV7_DOMAIN_MASK (0x3 << 0) - -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); -} - -void dram_bank_mmu_setup(int bank) -{ - bd_t *bd = gd->bd; - int i; - - u32 start = bd->bi_dram[bank].start >> MMU_SECTION_SHIFT; - u32 size = bd->bi_dram[bank].size >> MMU_SECTION_SHIFT; - u32 end = start + size; - - debug("%s: bank: %d\n", __func__, bank); - for (i = start; i < end; i++) - set_section_dcache(i, ARMV7_DCACHE_POLICY); -} - -void arm_init_domains(void) -{ - u32 reg; - - reg = get_dacr(); - /* - * Set DOMAIN to client access so that all permissions - * set in pagetables are validated by the mmu. - */ - reg &= ~ARMV7_DOMAIN_MASK; - reg |= ARMV7_DOMAIN_CLIENT; - set_dacr(reg); -} diff --git a/arch/arm/cpu/armv7/omap-common/pipe3-phy.c b/arch/arm/cpu/armv7/omap-common/pipe3-phy.c deleted file mode 100644 index e02e3ec..0000000 --- a/arch/arm/cpu/armv7/omap-common/pipe3-phy.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * TI PIPE3 PHY - * - * (C) Copyright 2013 - * Texas Instruments, - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include "pipe3-phy.h" - -/* PLLCTRL Registers */ -#define PLL_STATUS 0x00000004 -#define PLL_GO 0x00000008 -#define PLL_CONFIGURATION1 0x0000000C -#define PLL_CONFIGURATION2 0x00000010 -#define PLL_CONFIGURATION3 0x00000014 -#define PLL_CONFIGURATION4 0x00000020 - -#define PLL_REGM_MASK 0x001FFE00 -#define PLL_REGM_SHIFT 9 -#define PLL_REGM_F_MASK 0x0003FFFF -#define PLL_REGM_F_SHIFT 0 -#define PLL_REGN_MASK 0x000001FE -#define PLL_REGN_SHIFT 1 -#define PLL_SELFREQDCO_MASK 0x0000000E -#define PLL_SELFREQDCO_SHIFT 1 -#define PLL_SD_MASK 0x0003FC00 -#define PLL_SD_SHIFT 10 -#define SET_PLL_GO 0x1 -#define PLL_TICOPWDN BIT(16) -#define PLL_LDOPWDN BIT(15) -#define PLL_LOCK 0x2 -#define PLL_IDLE 0x1 - -/* PHY POWER CONTROL Register */ -#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000 -#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE - -#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000 -#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16 - -#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3 -#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0 - - -#define PLL_IDLE_TIME 100 /* in milliseconds */ -#define PLL_LOCK_TIME 100 /* in milliseconds */ - -static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset) -{ - return __raw_readl(addr + offset); -} - -static inline void omap_pipe3_writel(void __iomem *addr, unsigned offset, - u32 data) -{ - __raw_writel(data, addr + offset); -} - -static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3 - *pipe3) -{ - u32 rate; - struct pipe3_dpll_map *dpll_map = pipe3->dpll_map; - - rate = get_sys_clk_freq(); - - for (; dpll_map->rate; dpll_map++) { - if (rate == dpll_map->rate) - return &dpll_map->params; - } - - printf("%s: No DPLL configuration for %u Hz SYS CLK\n", - __func__, rate); - return NULL; -} - - -static int omap_pipe3_wait_lock(struct omap_pipe3 *phy) -{ - u32 val; - int timeout = PLL_LOCK_TIME; - - do { - mdelay(1); - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); - if (val & PLL_LOCK) - break; - } while (--timeout); - - if (!(val & PLL_LOCK)) { - printf("%s: DPLL failed to lock\n", __func__); - return -EBUSY; - } - - return 0; -} - -static int omap_pipe3_dpll_program(struct omap_pipe3 *phy) -{ - u32 val; - struct pipe3_dpll_params *dpll_params; - - dpll_params = omap_pipe3_get_dpll_params(phy); - if (!dpll_params) { - printf("%s: Invalid DPLL parameters\n", __func__); - return -EINVAL; - } - - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); - val &= ~PLL_REGN_MASK; - val |= dpll_params->n << PLL_REGN_SHIFT; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); - - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val &= ~PLL_SELFREQDCO_MASK; - val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); - val &= ~PLL_REGM_MASK; - val |= dpll_params->m << PLL_REGM_SHIFT; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); - - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); - val &= ~PLL_REGM_F_MASK; - val |= dpll_params->mf << PLL_REGM_F_SHIFT; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); - - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); - val &= ~PLL_SD_MASK; - val |= dpll_params->sd << PLL_SD_SHIFT; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); - - omap_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); - - return omap_pipe3_wait_lock(phy); -} - -static void omap_control_phy_power(struct omap_pipe3 *phy, int on) -{ - u32 val, rate; - - val = readl(phy->power_reg); - - rate = get_sys_clk_freq(); - rate = rate/1000000; - - if (on) { - val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | - OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK); - val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON << - OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; - val |= rate << - OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; - } else { - val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK; - val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF << - OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; - } - - writel(val, phy->power_reg); -} - -int phy_pipe3_power_on(struct omap_pipe3 *phy) -{ - int ret; - u32 val; - - /* Program the DPLL only if not locked */ - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); - if (!(val & PLL_LOCK)) { - ret = omap_pipe3_dpll_program(phy); - if (ret) - return ret; - } else { - /* else just bring it out of IDLE mode */ - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - if (val & PLL_IDLE) { - val &= ~PLL_IDLE; - omap_pipe3_writel(phy->pll_ctrl_base, - PLL_CONFIGURATION2, val); - ret = omap_pipe3_wait_lock(phy); - if (ret) - return ret; - } - } - - /* Power up the PHY */ - omap_control_phy_power(phy, 1); - - return 0; -} - -int phy_pipe3_power_off(struct omap_pipe3 *phy) -{ - u32 val; - int timeout = PLL_IDLE_TIME; - - /* Power down the PHY */ - omap_control_phy_power(phy, 0); - - /* Put DPLL in IDLE mode */ - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val |= PLL_IDLE; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - /* wait for LDO and Oscillator to power down */ - do { - mdelay(1); - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); - if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN)) - break; - } while (--timeout); - - if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) { - printf("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n", - __func__, val); - return -EBUSY; - } - - return 0; -} - diff --git a/arch/arm/cpu/armv7/omap-common/pipe3-phy.h b/arch/arm/cpu/armv7/omap-common/pipe3-phy.h deleted file mode 100644 index 441f49a..0000000 --- a/arch/arm/cpu/armv7/omap-common/pipe3-phy.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * TI PIPE3 PHY - * - * (C) Copyright 2013 - * Texas Instruments, - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __OMAP_PIPE3_PHY_H -#define __OMAP_PIPE3_PHY_H - -struct pipe3_dpll_params { - u16 m; - u8 n; - u8 freq:3; - u8 sd; - u32 mf; -}; - -struct pipe3_dpll_map { - unsigned long rate; - struct pipe3_dpll_params params; -}; - -struct omap_pipe3 { - void __iomem *pll_ctrl_base; - void __iomem *power_reg; - struct pipe3_dpll_map *dpll_map; -}; - - -int phy_pipe3_power_on(struct omap_pipe3 *phy); -int phy_pipe3_power_off(struct omap_pipe3 *pipe3); - -#endif /* __OMAP_PIPE3_PHY_H */ diff --git a/arch/arm/cpu/armv7/omap-common/reset.c b/arch/arm/cpu/armv7/omap-common/reset.c deleted file mode 100644 index 91ad031..0000000 --- a/arch/arm/cpu/armv7/omap-common/reset.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * - * Common layer for reset related functionality of OMAP based socs. - * - * (C) Copyright 2012 - * Texas Instruments, - * - * Sricharan R - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include - -void __weak reset_cpu(unsigned long ignored) -{ - writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL); -} - -u32 __weak warm_reset(void) -{ - return (readl(PRM_RSTST) & PRM_RSTST_WARM_RESET_MASK); -} - -void __weak setup_warmreset_time(void) -{ -} diff --git a/arch/arm/cpu/armv7/omap-common/sata.c b/arch/arm/cpu/armv7/omap-common/sata.c deleted file mode 100644 index 2c2d1bc..0000000 --- a/arch/arm/cpu/armv7/omap-common/sata.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * TI SATA platform driver - * - * (C) Copyright 2013 - * Texas Instruments, - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include "pipe3-phy.h" - -static struct pipe3_dpll_map dpll_map_sata[] = { - {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */ - {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */ - {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ - {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */ - {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */ - {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */ - { }, /* Terminator */ -}; - -struct omap_pipe3 sata_phy = { - .pll_ctrl_base = (void __iomem *)TI_SATA_PLLCTRL_BASE, - /* .power_reg is updated at runtime */ - .dpll_map = dpll_map_sata, -}; - -int init_sata(int dev) -{ - int ret; - u32 val; - - u32 const clk_domains_sata[] = { - 0 - }; - - u32 const clk_modules_hw_auto_sata[] = { - (*prcm)->cm_l3init_ocp2scp3_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_sata[] = { - (*prcm)->cm_l3init_sata_clkctrl, - 0 - }; - - do_enable_clocks(clk_domains_sata, - clk_modules_hw_auto_sata, - clk_modules_explicit_en_sata, - 0); - - /* Enable optional functional clock for SATA */ - setbits_le32((*prcm)->cm_l3init_sata_clkctrl, - SATA_CLKCTRL_OPTFCLKEN_MASK); - - sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata; - - /* Power up the PHY */ - phy_pipe3_power_on(&sata_phy); - - /* Enable SATA module, No Idle, No Standby */ - val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO; - writel(val, TI_SATA_WRAPPER_BASE + TI_SATA_SYSCONFIG); - - ret = ahci_init((void __iomem *)DWC_AHSATA_BASE); - - return ret; -} - -int reset_sata(int dev) -{ - return 0; -} - -/* On OMAP platforms SATA provides the SCSI subsystem */ -void scsi_init(void) -{ - init_sata(0); - scsi_scan(1); -} - -void scsi_bus_reset(void) -{ - ahci_reset((void __iomem *)DWC_AHSATA_BASE); - ahci_init((void __iomem *)DWC_AHSATA_BASE); -} diff --git a/arch/arm/cpu/armv7/omap-common/sec-common.c b/arch/arm/cpu/armv7/omap-common/sec-common.c deleted file mode 100644 index 246a239..0000000 --- a/arch/arm/cpu/armv7/omap-common/sec-common.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * - * Common security related functions for OMAP devices - * - * (C) Copyright 2016 - * Texas Instruments, - * - * Daniel Allred - * Andreas Dannenberg - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -#include -#include -#include -#include -#include - -/* Index for signature verify ROM API */ -#define API_HAL_KM_VERIFYCERTIFICATESIGNATURE_INDEX (0x0000000E) - -static uint32_t secure_rom_call_args[5] __aligned(ARCH_DMA_MINALIGN); - -u32 secure_rom_call(u32 service, u32 proc_id, u32 flag, ...) -{ - int i; - u32 num_args; - va_list ap; - - va_start(ap, flag); - - num_args = va_arg(ap, u32); - - if (num_args > 4) - return 1; - - /* Copy args to aligned args structure */ - for (i = 0; i < num_args; i++) - secure_rom_call_args[i + 1] = va_arg(ap, u32); - - secure_rom_call_args[0] = num_args; - - va_end(ap); - - /* if data cache is enabled, flush the aligned args structure */ - flush_dcache_range( - (unsigned int)&secure_rom_call_args[0], - (unsigned int)&secure_rom_call_args[0] + - roundup(sizeof(secure_rom_call_args), ARCH_DMA_MINALIGN)); - - return omap_smc_sec(service, proc_id, flag, secure_rom_call_args); -} - -static u32 find_sig_start(char *image, size_t size) -{ - char *image_end = image + size; - char *sig_start_magic = "CERT_"; - int magic_str_len = strlen(sig_start_magic); - char *ch; - - while (--image_end > image) { - if (*image_end == '_') { - ch = image_end - magic_str_len + 1; - if (!strncmp(ch, sig_start_magic, magic_str_len)) - return (u32)ch; - } - } - return 0; -} - -int secure_boot_verify_image(void **image, size_t *size) -{ - int result = 1; - u32 cert_addr, sig_addr; - size_t cert_size; - - /* Perform cache writeback on input buffer */ - flush_dcache_range( - (u32)*image, - (u32)*image + roundup(*size, ARCH_DMA_MINALIGN)); - - cert_addr = (uint32_t)*image; - sig_addr = find_sig_start((char *)*image, *size); - - if (sig_addr == 0) { - printf("No signature found in image!\n"); - result = 1; - goto auth_exit; - } - - *size = sig_addr - cert_addr; /* Subtract out the signature size */ - cert_size = *size; - - /* Check if image load address is 32-bit aligned */ - if (!IS_ALIGNED(cert_addr, 4)) { - printf("Image is not 4-byte aligned!\n"); - result = 1; - goto auth_exit; - } - - /* Image size also should be multiple of 4 */ - if (!IS_ALIGNED(cert_size, 4)) { - printf("Image size is not 4-byte aligned!\n"); - result = 1; - goto auth_exit; - } - - /* Call ROM HAL API to verify certificate signature */ - debug("%s: load_addr = %x, size = %x, sig_addr = %x\n", __func__, - cert_addr, cert_size, sig_addr); - - result = secure_rom_call( - API_HAL_KM_VERIFYCERTIFICATESIGNATURE_INDEX, 0, 0, - 4, cert_addr, cert_size, sig_addr, 0xFFFFFFFF); -auth_exit: - if (result != 0) { - printf("Authentication failed!\n"); - printf("Return Value = %08X\n", result); - hang(); - } - - /* - * Output notification of successful authentication as well the name of - * the signing certificate used to re-assure the user that the secure - * code is being processed as expected. However suppress any such log - * output in case of building for SPL and booting via YMODEM. This is - * done to avoid disturbing the YMODEM serial protocol transactions. - */ - if (!(IS_ENABLED(CONFIG_SPL_BUILD) && - IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) && - spl_boot_device() == BOOT_DEVICE_UART)) - printf("Authentication passed: %s\n", (char *)sig_addr); - - return result; -} diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c deleted file mode 100644 index 49e3a97..0000000 --- a/arch/arm/cpu/armv7/omap-common/timer.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * (C) Copyright 2008 - * Texas Instruments - * - * Richard Woodruff - * Syed Moahmmed Khasim - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * Alex Zuepke - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE; - -/* - * Nothing really to do with interrupts, just starts up a counter. - */ - -#define TIMER_CLOCK (V_SCLK / (2 << CONFIG_SYS_PTV)) -#define TIMER_OVERFLOW_VAL 0xffffffff -#define TIMER_LOAD_VAL 0 - -int timer_init(void) -{ - /* start the counter ticking up, reload value on overflow */ - writel(TIMER_LOAD_VAL, &timer_base->tldr); - /* enable timer */ - writel((CONFIG_SYS_PTV << 2) | TCLR_PRE | TCLR_AR | TCLR_ST, - &timer_base->tclr); - - return 0; -} - -/* - * timer without interrupts - */ -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -/* delay x useconds */ -void __udelay(unsigned long usec) -{ - long tmo = usec * (TIMER_CLOCK / 1000) / 1000; - unsigned long now, last = readl(&timer_base->tcrr); - - while (tmo > 0) { - now = readl(&timer_base->tcrr); - if (last > now) /* count up timer overflow */ - tmo -= TIMER_OVERFLOW_VAL - last + now + 1; - else - tmo -= now - last; - last = now; - } -} - -ulong get_timer_masked(void) -{ - /* current tick value */ - ulong now = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ); - - if (now >= gd->arch.lastinc) { /* normal mode (non roll) */ - /* move stamp fordward with absoulte diff ticks */ - gd->arch.tbl += (now - gd->arch.lastinc); - } else { /* we have rollover of incrementer */ - gd->arch.tbl += ((TIMER_OVERFLOW_VAL / (TIMER_CLOCK / - CONFIG_SYS_HZ)) - gd->arch.lastinc) + now; - } - gd->arch.lastinc = now; - return gd->arch.tbl; -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return CONFIG_SYS_HZ; -} diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds deleted file mode 100644 index 8fec715..0000000 --- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +++ /dev/null @@ -1,57 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * (C) Copyright 2010 - * Texas Instruments, - * Aneesh V - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ - LENGTH = CONFIG_SPL_MAX_SIZE } -MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ - LENGTH = CONFIG_SPL_BSS_MAX_SIZE } - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - .text : - { - __start = .; - *(.vectors) - arch/arm/cpu/armv7/start.o (.text*) - *(.text*) - } >.sram - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram - - . = ALIGN(4); - .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } >.sram - - . = ALIGN(4); - __image_copy_end = .; - - .end : - { - *(.__end) - } - - .bss : - { - . = ALIGN(4); - __bss_start = .; - *(.bss*) - . = ALIGN(4); - __bss_end = .; - } >.sdram -} diff --git a/arch/arm/cpu/armv7/omap-common/utils.c b/arch/arm/cpu/armv7/omap-common/utils.c deleted file mode 100644 index 2d03ebf..0000000 --- a/arch/arm/cpu/armv7/omap-common/utils.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Copyright 2011 Linaro Limited - * Aneesh V - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -static void do_cancel_out(u32 *num, u32 *den, u32 factor) -{ - while (1) { - if (((*num)/factor*factor == (*num)) && - ((*den)/factor*factor == (*den))) { - (*num) /= factor; - (*den) /= factor; - } else - break; - } -} - -/* - * Cancel out the denominator and numerator of a fraction - * to get smaller numerator and denominator. - */ -void cancel_out(u32 *num, u32 *den, u32 den_limit) -{ - do_cancel_out(num, den, 2); - do_cancel_out(num, den, 3); - do_cancel_out(num, den, 5); - do_cancel_out(num, den, 7); - do_cancel_out(num, den, 11); - do_cancel_out(num, den, 13); - do_cancel_out(num, den, 17); - while ((*den) > den_limit) { - *num /= 2; - /* - * Round up the denominator so that the final fraction - * (num/den) is always <= the desired value - */ - *den = (*den + 1) / 2; - } -} - -__weak void omap_die_id(unsigned int *die_id) -{ - die_id[0] = die_id[1] = die_id[2] = die_id[3] = 0; -} - -void omap_die_id_serial(void) -{ - unsigned int die_id[4] = { 0 }; - char serial_string[17] = { 0 }; - - omap_die_id((unsigned int *)&die_id); - - if (!getenv("serial#")) { - snprintf(serial_string, sizeof(serial_string), - "%08x%08x", die_id[0], die_id[3]); - - setenv("serial#", serial_string); - } -} - -void omap_die_id_get_board_serial(struct tag_serialnr *serialnr) -{ - char *serial_string; - unsigned long long serial; - - serial_string = getenv("serial#"); - - if (serial_string) { - serial = simple_strtoull(serial_string, NULL, 16); - - serialnr->high = (unsigned int) (serial >> 32); - serialnr->low = (unsigned int) (serial & 0xffffffff); - } else { - serialnr->high = 0; - serialnr->low = 0; - } -} - -void omap_die_id_usbethaddr(void) -{ - unsigned int die_id[4] = { 0 }; - unsigned char mac[6] = { 0 }; - - omap_die_id((unsigned int *)&die_id); - - if (!getenv("usbethaddr")) { - /* - * Create a fake MAC address from the processor ID code. - * First byte is 0x02 to signify locally administered. - */ - mac[0] = 0x02; - mac[1] = die_id[3] & 0xff; - mac[2] = die_id[2] & 0xff; - mac[3] = die_id[1] & 0xff; - mac[4] = die_id[0] & 0xff; - mac[5] = (die_id[0] >> 8) & 0xff; - - eth_setenv_enetaddr("usbethaddr", mac); - } -} - -void omap_die_id_display(void) -{ - unsigned int die_id[4] = { 0 }; - - omap_die_id(die_id); - - printf("OMAP die ID: %08x%08x%08x%08x\n", die_id[3], die_id[2], - die_id[1], die_id[0]); -} diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c deleted file mode 100644 index a68f1d1..0000000 --- a/arch/arm/cpu/armv7/omap-common/vc.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Voltage Controller implementation for OMAP - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * Nishanth Menon - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include - -/* - * Define Master code if there are multiple masters on the I2C_SR bus. - * Normally not required - */ -#ifndef CONFIG_OMAP_VC_I2C_HS_MCODE -#define CONFIG_OMAP_VC_I2C_HS_MCODE 0x0 -#endif - -/* Register defines and masks for VC IP Block */ -/* PRM_VC_CFG_I2C_MODE */ -#define PRM_VC_CFG_I2C_MODE_DFILTEREN_BIT (0x1 << 6) -#define PRM_VC_CFG_I2C_MODE_SRMODEEN_BIT (0x1 << 4) -#define PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT (0x1 << 3) -#define PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT 0x0 -#define PRM_VC_CFG_I2C_MODE_HSMCODE_MASK 0x3 - -/* PRM_VC_CFG_I2C_CLK */ -#define PRM_VC_CFG_I2C_CLK_HSCLL_SHIFT 24 -#define PRM_VC_CFG_I2C_CLK_HSCLL_MASK 0xFF -#define PRM_VC_CFG_I2C_CLK_HSCLH_SHIFT 16 -#define PRM_VC_CFG_I2C_CLK_HSCLH_MASK 0xFF -#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0 -#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF -#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8 -#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8) - -/* PRM_VC_VAL_BYPASS */ -#define PRM_VC_VAL_BYPASS_VALID_BIT (0x1 << 24) -#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0 -#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F -#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8 -#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF -#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16 -#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF - -/** - * omap_vc_init() - Initialization for Voltage controller - * @speed_khz: I2C buspeed in KHz - */ -static void omap_vc_init(u16 speed_khz) -{ - u32 val; - u32 sys_clk_khz, cycles_hi, cycles_low; - - sys_clk_khz = get_sys_clk_freq() / 1000; - - if (speed_khz > 400) { - puts("higher speed requested - throttle to 400Khz\n"); - speed_khz = 400; - } - - /* - * Setup the dedicated I2C controller for Voltage Control - * I2C clk - high period 40% low period 60% - */ - speed_khz /= 10; - cycles_hi = sys_clk_khz * 4 / speed_khz; - cycles_low = sys_clk_khz * 6 / speed_khz; - /* values to be set in register - less by 5 & 7 respectively */ - cycles_hi -= 5; - cycles_low -= 7; - val = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) | - (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT); - writel(val, (*prcm)->prm_vc_cfg_i2c_clk); - - val = CONFIG_OMAP_VC_I2C_HS_MCODE << - PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT; - /* No HS mode for now */ - val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT; - writel(val, (*prcm)->prm_vc_cfg_i2c_mode); -} - -/** - * omap_vc_bypass_send_value() - Send a data using VC Bypass command - * @sa: 7 bit I2C slave address of the PMIC - * @reg_addr: I2C register address(8 bit) address in PMIC - * @reg_data: what 8 bit data to write - */ -int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data) -{ - /* - * Unfortunately we need to loop here instead of a defined time - * use arbitary large value - */ - u32 timeout = 0xFFFF; - u32 reg_val; - - sa &= PRM_VC_VAL_BYPASS_SLAVEADDR_MASK; - reg_addr &= PRM_VC_VAL_BYPASS_REGADDR_MASK; - reg_data &= PRM_VC_VAL_BYPASS_DATA_MASK; - - /* program VC to send data */ - reg_val = sa << PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT | - reg_addr << PRM_VC_VAL_BYPASS_REGADDR_SHIFT | - reg_data << PRM_VC_VAL_BYPASS_DATA_SHIFT; - writel(reg_val, (*prcm)->prm_vc_val_bypass); - - /* Signal VC to send data */ - writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, - (*prcm)->prm_vc_val_bypass); - - /* Wait on VC to complete transmission */ - do { - reg_val = readl((*prcm)->prm_vc_val_bypass) & - PRM_VC_VAL_BYPASS_VALID_BIT; - if (!reg_val) - break; - - sdelay(100); - } while (--timeout); - - /* Optional: cleanup PRM_IRQSTATUS_Ax */ - /* In case we can do something about it in future.. */ - if (!timeout) - return -1; - - /* All good.. */ - return 0; -} - -void sri2c_init(void) -{ - static int sri2c = 1; - - if (sri2c) { - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); - sri2c = 0; - } - return; -} diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig deleted file mode 100644 index 7d884a2..0000000 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ /dev/null @@ -1,154 +0,0 @@ -if OMAP34XX - -config SPL_EXT_SUPPORT - default y - -config SPL_FAT_SUPPORT - default y - -config SPL_GPIO_SUPPORT - default y - -config SPL_I2C_SUPPORT - default y - -config SPL_LIBCOMMON_SUPPORT - default y - -config SPL_LIBDISK_SUPPORT - default y - -config SPL_LIBGENERIC_SUPPORT - default y - -config SPL_MMC_SUPPORT - default y - -config SPL_NAND_SUPPORT - default y - -config SPL_POWER_SUPPORT - default y - -config SPL_SERIAL_SUPPORT - default y - -choice - prompt "OMAP3 board select" - optional - -config TARGET_AM3517_EVM - bool "AM3517 EVM" - -config TARGET_MT_VENTOUX - bool "TeeJet Mt.Ventoux" - -config TARGET_OMAP3_BEAGLE - bool "TI OMAP3 BeagleBoard" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_CM_T35 - bool "CompuLab CM-T3530 and CM-T3730 boards" - -config TARGET_CM_T3517 - bool "CompuLab CM-T3517 boards" - -config TARGET_DEVKIT8000 - bool "TimLL OMAP3 Devkit8000" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_OMAP3_EVM - bool "TI OMAP3 EVM" - -config TARGET_OMAP3_IGEP00X0 - bool "IGEP" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_OMAP3_OVERO - bool "OMAP35xx Gumstix Overo" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_OMAP3_ZOOM1 - bool "TI Zoom1" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_AM3517_CRANE - bool "am3517_crane" - -config TARGET_OMAP3_PANDORA - bool "OMAP3 Pandora" - -config TARGET_ECO5PK - bool "ECO5PK" - -config TARGET_TRICORDER - bool "Tricorder" - -config TARGET_MCX - bool "MCX" - -config TARGET_OMAP3_LOGIC - bool "OMAP3 Logic" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_NOKIA_RX51 - bool "Nokia RX51" - -config TARGET_TAO3530 - bool "TAO3530" - -config TARGET_TWISTER - bool "Twister" - -config TARGET_OMAP3_CAIRO - bool "QUIPOS CAIRO" - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_SNIPER - bool "LG Optimus Black" - select DM - select DM_SERIAL - select DM_GPIO - -endchoice - -config SYS_SOC - default "omap3" - -source "board/logicpd/am3517evm/Kconfig" -source "board/teejet/mt_ventoux/Kconfig" -source "board/ti/beagle/Kconfig" -source "board/compulab/cm_t35/Kconfig" -source "board/compulab/cm_t3517/Kconfig" -source "board/timll/devkit8000/Kconfig" -source "board/ti/evm/Kconfig" -source "board/isee/igep00x0/Kconfig" -source "board/overo/Kconfig" -source "board/logicpd/zoom1/Kconfig" -source "board/ti/am3517crane/Kconfig" -source "board/pandora/Kconfig" -source "board/8dtech/eco5pk/Kconfig" -source "board/corscience/tricorder/Kconfig" -source "board/htkw/mcx/Kconfig" -source "board/logicpd/omap3som/Kconfig" -source "board/nokia/rx51/Kconfig" -source "board/technexion/tao3530/Kconfig" -source "board/technexion/twister/Kconfig" -source "board/quipos/cairo/Kconfig" -source "board/lg/sniper/Kconfig" - -endif diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile deleted file mode 100644 index b2fce96..0000000 --- a/arch/arm/cpu/armv7/omap3/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := lowlevel_init.o - -obj-y += board.o -obj-y += boot.o -obj-y += clock.o -obj-y += sys_info.o -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_SPL_OMAP3_ID_NAND) += spl_id_nand.o -endif - -obj-$(CONFIG_DRIVER_TI_EMAC) += emac.o -obj-$(CONFIG_EMIF4) += emif4.o -obj-$(CONFIG_SDRC) += sdrc.o -obj-$(CONFIG_USB_MUSB_AM35X) += am35x_musb.o diff --git a/arch/arm/cpu/armv7/omap3/am35x_musb.c b/arch/arm/cpu/armv7/omap3/am35x_musb.c deleted file mode 100644 index 74dd105..0000000 --- a/arch/arm/cpu/armv7/omap3/am35x_musb.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file configures the internal USB PHY in AM35X. - * - * Copyright (C) 2012 Ilya Yanok - * - * Based on omap_phy_internal.c code from Linux by - * Hema HK - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void am35x_musb_reset(void) -{ - /* Reset the musb interface */ - clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset, - 0, USBOTGSS_SW_RST); - clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset, - USBOTGSS_SW_RST, 0); -} - -void am35x_musb_phy_power(u8 on) -{ - unsigned long start = get_timer(0); - - if (on) { - /* - * Start the on-chip PHY and its PLL. - */ - clrsetbits_le32(&am35x_scm_general_regs->devconf2, - CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN, - CONF2_PHY_PLLON); - - debug("Waiting for PHY clock good...\n"); - while (!(readl(&am35x_scm_general_regs->devconf2) - & CONF2_PHYCLKGD)) { - - if (get_timer(start) > CONFIG_SYS_HZ / 10) { - printf("musb PHY clock good timed out\n"); - break; - } - } - } else { - /* - * Power down the on-chip PHY. - */ - clrsetbits_le32(&am35x_scm_general_regs->devconf2, - CONF2_PHY_PLLON, - CONF2_PHYPWRDN | CONF2_OTGPWRDN); - } -} - -void am35x_musb_clear_irq(void) -{ - clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr, - 0, USBOTGSS_INT_CLR); - readl(&am35x_scm_general_regs->lvl_intr_clr); -} diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c deleted file mode 100644 index 5f55977..0000000 --- a/arch/arm/cpu/armv7/omap3/board.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * - * Common board functions for OMAP3 based boards. - * - * (C) Copyright 2004-2008 - * Texas Instruments, - * - * Author : - * Sunil Kumar - * Shashi Ranjan - * - * Derived from Beagle Board and 3430 SDP code by - * Richard Woodruff - * Syed Mohammed Khasim - * - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* Declarations */ -extern omap3_sysinfo sysinfo; -#ifndef CONFIG_SYS_L2CACHE_OFF -static void omap3_invalidate_l2_cache_secure(void); -#endif - -#ifdef CONFIG_DM_GPIO -static const struct omap_gpio_platdata omap34xx_gpio[] = { - { 0, OMAP34XX_GPIO1_BASE }, - { 1, OMAP34XX_GPIO2_BASE }, - { 2, OMAP34XX_GPIO3_BASE }, - { 3, OMAP34XX_GPIO4_BASE }, - { 4, OMAP34XX_GPIO5_BASE }, - { 5, OMAP34XX_GPIO6_BASE }, -}; - -U_BOOT_DEVICES(am33xx_gpios) = { - { "gpio_omap", &omap34xx_gpio[0] }, - { "gpio_omap", &omap34xx_gpio[1] }, - { "gpio_omap", &omap34xx_gpio[2] }, - { "gpio_omap", &omap34xx_gpio[3] }, - { "gpio_omap", &omap34xx_gpio[4] }, - { "gpio_omap", &omap34xx_gpio[5] }, -}; - -#else - -static const struct gpio_bank gpio_bank_34xx[6] = { - { (void *)OMAP34XX_GPIO1_BASE }, - { (void *)OMAP34XX_GPIO2_BASE }, - { (void *)OMAP34XX_GPIO3_BASE }, - { (void *)OMAP34XX_GPIO4_BASE }, - { (void *)OMAP34XX_GPIO5_BASE }, - { (void *)OMAP34XX_GPIO6_BASE }, -}; - -const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; - -#endif - -/****************************************************************************** - * Routine: secure_unlock - * Description: Setup security registers for access - * (GP Device only) - *****************************************************************************/ -void secure_unlock_mem(void) -{ - struct pm *pm_rt_ape_base = (struct pm *)PM_RT_APE_BASE_ADDR_ARM; - struct pm *pm_gpmc_base = (struct pm *)PM_GPMC_BASE_ADDR_ARM; - struct pm *pm_ocm_ram_base = (struct pm *)PM_OCM_RAM_BASE_ADDR_ARM; - struct pm *pm_iva2_base = (struct pm *)PM_IVA2_BASE_ADDR_ARM; - struct sms *sms_base = (struct sms *)OMAP34XX_SMS_BASE; - - /* Protection Module Register Target APE (PM_RT) */ - writel(UNLOCK_1, &pm_rt_ape_base->req_info_permission_1); - writel(UNLOCK_1, &pm_rt_ape_base->read_permission_0); - writel(UNLOCK_1, &pm_rt_ape_base->wirte_permission_0); - writel(UNLOCK_2, &pm_rt_ape_base->addr_match_1); - - writel(UNLOCK_3, &pm_gpmc_base->req_info_permission_0); - writel(UNLOCK_3, &pm_gpmc_base->read_permission_0); - writel(UNLOCK_3, &pm_gpmc_base->wirte_permission_0); - - writel(UNLOCK_3, &pm_ocm_ram_base->req_info_permission_0); - writel(UNLOCK_3, &pm_ocm_ram_base->read_permission_0); - writel(UNLOCK_3, &pm_ocm_ram_base->wirte_permission_0); - writel(UNLOCK_2, &pm_ocm_ram_base->addr_match_2); - - /* IVA Changes */ - writel(UNLOCK_3, &pm_iva2_base->req_info_permission_0); - writel(UNLOCK_3, &pm_iva2_base->read_permission_0); - writel(UNLOCK_3, &pm_iva2_base->wirte_permission_0); - - /* SDRC region 0 public */ - writel(UNLOCK_1, &sms_base->rg_att0); -} - -/****************************************************************************** - * Routine: secureworld_exit() - * Description: If chip is EMU and boot type is external - * configure secure registers and exit secure world - * general use. - *****************************************************************************/ -void secureworld_exit(void) -{ - unsigned long i; - - /* configure non-secure access control register */ - __asm__ __volatile__("mrc p15, 0, %0, c1, c1, 2":"=r"(i)); - /* enabling co-processor CP10 and CP11 accesses in NS world */ - __asm__ __volatile__("orr %0, %0, #0xC00":"=r"(i)); - /* - * allow allocation of locked TLBs and L2 lines in NS world - * allow use of PLE registers in NS world also - */ - __asm__ __volatile__("orr %0, %0, #0x70000":"=r"(i)); - __asm__ __volatile__("mcr p15, 0, %0, c1, c1, 2":"=r"(i)); - - /* Enable ASA in ACR register */ - __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i)); - __asm__ __volatile__("orr %0, %0, #0x10":"=r"(i)); - __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i)); - - /* Exiting secure world */ - __asm__ __volatile__("mrc p15, 0, %0, c1, c1, 0":"=r"(i)); - __asm__ __volatile__("orr %0, %0, #0x31":"=r"(i)); - __asm__ __volatile__("mcr p15, 0, %0, c1, c1, 0":"=r"(i)); -} - -/****************************************************************************** - * Routine: try_unlock_sram() - * Description: If chip is GP/EMU(special) type, unlock the SRAM for - * general use. - *****************************************************************************/ -void try_unlock_memory(void) -{ - int mode; - int in_sdram = is_running_in_sdram(); - - /* - * if GP device unlock device SRAM for general use - * secure code breaks for Secure/Emulation device - HS/E/T - */ - mode = get_device_type(); - if (mode == GP_DEVICE) - secure_unlock_mem(); - - /* - * If device is EMU and boot is XIP external booting - * Unlock firewalls and disable L2 and put chip - * out of secure world - * - * Assuming memories are unlocked by the demon who put us in SDRAM - */ - if ((mode <= EMU_DEVICE) && (get_boot_type() == 0x1F) - && (!in_sdram)) { - secure_unlock_mem(); - secureworld_exit(); - } - - return; -} - -/****************************************************************************** - * Routine: s_init - * Description: Does early system init of muxing and clocks. - * - Called path is with SRAM stack. - *****************************************************************************/ -void s_init(void) -{ - watchdog_init(); - - try_unlock_memory(); - -#ifndef CONFIG_SYS_L2CACHE_OFF - /* Invalidate L2-cache from secure mode */ - omap3_invalidate_l2_cache_secure(); -#endif - - set_muxconf_regs(); - sdelay(100); - - prcm_init(); - - per_clocks_enable(); - -#ifdef CONFIG_USB_EHCI_OMAP - ehci_clocks_enable(); -#endif -} - -#ifdef CONFIG_SPL_BUILD -void board_init_f(ulong dummy) -{ - mem_init(); -} -#endif - -/* - * Routine: misc_init_r - * Description: A basic misc_init_r that just displays the die ID - */ -int __weak misc_init_r(void) -{ - omap_die_id_display(); - - return 0; -} - -/****************************************************************************** - * Routine: wait_for_command_complete - * Description: Wait for posting to finish on watchdog - *****************************************************************************/ -static void wait_for_command_complete(struct watchdog *wd_base) -{ - int pending = 1; - do { - pending = readl(&wd_base->wwps); - } while (pending); -} - -/****************************************************************************** - * Routine: watchdog_init - * Description: Shut down watch dogs - *****************************************************************************/ -void watchdog_init(void) -{ - struct watchdog *wd2_base = (struct watchdog *)WD2_BASE; - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - - /* - * There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is - * either taken care of by ROM (HS/EMU) or not accessible (GP). - * We need to take care of WD2-MPU or take a PRCM reset. WD3 - * should not be running and does not generate a PRCM reset. - */ - - setbits_le32(&prcm_base->fclken_wkup, 0x20); - setbits_le32(&prcm_base->iclken_wkup, 0x20); - wait_on_value(ST_WDT2, 0x20, &prcm_base->idlest_wkup, 5); - - writel(WD_UNLOCK1, &wd2_base->wspr); - wait_for_command_complete(wd2_base); - writel(WD_UNLOCK2, &wd2_base->wspr); -} - -/****************************************************************************** - * Dummy function to handle errors for EABI incompatibility - *****************************************************************************/ -void abort(void) -{ -} - -#if defined(CONFIG_NAND_OMAP_GPMC) & !defined(CONFIG_SPL_BUILD) -/****************************************************************************** - * OMAP3 specific command to switch between NAND HW and SW ecc - *****************************************************************************/ -static int do_switch_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc < 2 || argc > 3) - goto usage; - - if (strncmp(argv[1], "hw", 2) == 0) { - if (argc == 2) { - omap_nand_switch_ecc(1, 1); - } else { - if (strncmp(argv[2], "hamming", 7) == 0) - omap_nand_switch_ecc(1, 1); - else if (strncmp(argv[2], "bch8", 4) == 0) - omap_nand_switch_ecc(1, 8); - else if (strncmp(argv[2], "bch16", 5) == 0) - omap_nand_switch_ecc(1, 16); - else - goto usage; - } - } else if (strncmp(argv[1], "sw", 2) == 0) { - if (argc == 2) { - omap_nand_switch_ecc(0, 1); - } else { - if (strncmp(argv[2], "hamming", 7) == 0) - omap_nand_switch_ecc(0, 1); - else if (strncmp(argv[2], "bch8", 4) == 0) - omap_nand_switch_ecc(0, 8); - else - goto usage; - } - } else { - goto usage; - } - - return 0; - -usage: - printf ("Usage: nandecc %s\n", cmdtp->usage); - return 1; -} - -U_BOOT_CMD( - nandecc, 3, 1, do_switch_ecc, - "switch OMAP3 NAND ECC calculation algorithm", - "hw [hamming|bch8|bch16] - Switch between NAND hardware 1-bit hamming" - " and 8-bit/16-bit BCH\n" - " ecc calculation (second parameter may" - " be omitted).\n" - "nandecc sw - Switch to NAND software ecc algorithm." -); - -#endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_SPL_BUILD */ - -#ifdef CONFIG_DISPLAY_BOARDINFO -/** - * Print board information - */ -int checkboard (void) -{ - char *mem_s ; - - if (is_mem_sdr()) - mem_s = "mSDR"; - else - mem_s = "LPDDR"; - - printf("%s + %s/%s\n", sysinfo.board_string, mem_s, - sysinfo.nand_string); - - return 0; -} -#endif /* CONFIG_DISPLAY_BOARDINFO */ - -static void omap3_emu_romcode_call(u32 service_id, u32 *parameters) -{ - u32 i, num_params = *parameters; - u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA; - - /* - * copy the parameters to an un-cached area to avoid coherency - * issues - */ - for (i = 0; i < num_params; i++) { - __raw_writel(*parameters, sram_scratch_space); - parameters++; - sram_scratch_space++; - } - - /* Now make the PPA call */ - do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA); -} - -void __weak omap3_set_aux_cr_secure(u32 acr) -{ - struct emu_hal_params emu_romcode_params; - - emu_romcode_params.num_params = 1; - emu_romcode_params.param1 = acr; - omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR, - (u32 *)&emu_romcode_params); -} - -void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb, - u32 cpu_variant, u32 cpu_rev) -{ - /* Write ACR - affects secure banked bits */ - if (get_device_type() == GP_DEVICE) - omap_smc1(OMAP3_GP_ROMCODE_API_WRITE_ACR, acr); - else - omap3_set_aux_cr_secure(acr); - - /* Write ACR - affects non-secure banked bits - some erratas need it */ - asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr)); -} - - -#ifndef CONFIG_SYS_L2CACHE_OFF -static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits) -{ - u32 acr; - - /* Read ACR */ - asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); - acr &= ~clear_bits; - acr |= set_bits; - v7_arch_cp15_set_acr(acr, 0, 0, 0, 0); - -} - -/* Invalidate the entire L2 cache from secure mode */ -static void omap3_invalidate_l2_cache_secure(void) -{ - if (get_device_type() == GP_DEVICE) { - omap_smc1(OMAP3_GP_ROMCODE_API_L2_INVAL, 0); - } else { - struct emu_hal_params emu_romcode_params; - emu_romcode_params.num_params = 1; - emu_romcode_params.param1 = 0; - omap3_emu_romcode_call(OMAP3_EMU_HAL_API_L2_INVAL, - (u32 *)&emu_romcode_params); - } -} - -void v7_outer_cache_enable(void) -{ - - /* - * Set L2EN - * On some revisions L2EN bit is banked on some revisions it's not - * No harm in setting both banked bits(in fact this is required - * by an erratum) - */ - omap3_update_aux_cr(0x2, 0); -} - -void omap3_outer_cache_disable(void) -{ - /* - * Clear L2EN - * On some revisions L2EN bit is banked on some revisions it's not - * No harm in clearing both banked bits(in fact this is required - * by an erratum) - */ - omap3_update_aux_cr(0, 0x2); -} -#endif /* !CONFIG_SYS_L2CACHE_OFF */ diff --git a/arch/arm/cpu/armv7/omap3/boot.c b/arch/arm/cpu/armv7/omap3/boot.c deleted file mode 100644 index 64b242b..0000000 --- a/arch/arm/cpu/armv7/omap3/boot.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * OMAP3 boot - * - * Copyright (C) 2015 Paul Kocialkowski - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static u32 boot_devices[] = { - BOOT_DEVICE_ONENAND, - BOOT_DEVICE_NAND, - BOOT_DEVICE_ONENAND, - BOOT_DEVICE_MMC2, - BOOT_DEVICE_ONENAND, - BOOT_DEVICE_MMC2, - BOOT_DEVICE_MMC1, - BOOT_DEVICE_XIP, - BOOT_DEVICE_XIPWAIT, - BOOT_DEVICE_MMC2, - BOOT_DEVICE_XIP, - BOOT_DEVICE_XIPWAIT, - BOOT_DEVICE_NAND, - BOOT_DEVICE_XIP, - BOOT_DEVICE_XIPWAIT, - BOOT_DEVICE_NAND, - BOOT_DEVICE_ONENAND, - BOOT_DEVICE_MMC2, - BOOT_DEVICE_MMC1, - BOOT_DEVICE_XIP, - BOOT_DEVICE_XIPWAIT, - BOOT_DEVICE_NAND, - BOOT_DEVICE_ONENAND, - BOOT_DEVICE_MMC2, - BOOT_DEVICE_MMC1, - BOOT_DEVICE_XIP, - BOOT_DEVICE_XIPWAIT, - BOOT_DEVICE_NAND, - BOOT_DEVICE_MMC2_2, -}; - -u32 omap_sys_boot_device(void) -{ - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - u32 sys_boot; - - /* Grab the first 5 bits of the status register for SYS_BOOT. */ - sys_boot = readl(&ctrl_base->status) & ((1 << 5) - 1); - - if (sys_boot >= (sizeof(boot_devices) / sizeof(u32))) - return BOOT_DEVICE_NONE; - - return boot_devices[sys_boot]; -} - -int omap_reboot_mode(char *mode, unsigned int length) -{ - u32 reboot_mode; - char c; - - if (length < 2) - return -1; - - reboot_mode = readl((u32 *)(OMAP34XX_SCRATCHPAD + - OMAP_REBOOT_REASON_OFFSET)); - - c = (reboot_mode >> 24) & 0xff; - if (c != 'B') - return -1; - - c = (reboot_mode >> 16) & 0xff; - if (c != 'M') - return -1; - - c = reboot_mode & 0xff; - - mode[0] = c; - mode[1] = '\0'; - - return 0; -} - -int omap_reboot_mode_clear(void) -{ - writel(0, (u32 *)(OMAP34XX_SCRATCHPAD + OMAP_REBOOT_REASON_OFFSET)); - - return 0; -} - -int omap_reboot_mode_store(char *mode) -{ - u32 reboot_mode; - - reboot_mode = 'B' << 24 | 'M' << 16 | mode[0]; - - writel(reboot_mode, (u32 *)(OMAP34XX_SCRATCHPAD + - OMAP_REBOOT_REASON_OFFSET)); - - return 0; -} diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c deleted file mode 100644 index 006969e..0000000 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ /dev/null @@ -1,799 +0,0 @@ -/* - * (C) Copyright 2008 - * Texas Instruments, - * - * Author : - * Manikandan Pillai - * - * Derived from Beagle Board and OMAP3 SDP code by - * Richard Woodruff - * Syed Mohammed Khasim - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/****************************************************************************** - * get_sys_clk_speed() - determine reference oscillator speed - * based on known 32kHz clock and gptimer. - *****************************************************************************/ -u32 get_osc_clk_speed(void) -{ - u32 start, cstart, cend, cdiff, cdiv, val; - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - struct prm *prm_base = (struct prm *)PRM_BASE; - struct gptimer *gpt1_base = (struct gptimer *)OMAP34XX_GPT1; - struct s32ktimer *s32k_base = (struct s32ktimer *)SYNC_32KTIMER_BASE; - - val = readl(&prm_base->clksrc_ctrl); - - if (val & SYSCLKDIV_2) - cdiv = 2; - else - cdiv = 1; - - /* enable timer2 */ - val = readl(&prcm_base->clksel_wkup) | CLKSEL_GPT1; - - /* select sys_clk for GPT1 */ - writel(val, &prcm_base->clksel_wkup); - - /* Enable I and F Clocks for GPT1 */ - val = readl(&prcm_base->iclken_wkup) | EN_GPT1 | EN_32KSYNC; - writel(val, &prcm_base->iclken_wkup); - - val = readl(&prcm_base->fclken_wkup) | EN_GPT1; - writel(val, &prcm_base->fclken_wkup); - - writel(0, &gpt1_base->tldr); /* start counting at 0 */ - writel(GPT_EN, &gpt1_base->tclr); /* enable clock */ - - /* enable 32kHz source, determine sys_clk via gauging */ - - /* start time in 20 cycles */ - start = 20 + readl(&s32k_base->s32k_cr); - - /* dead loop till start time */ - while (readl(&s32k_base->s32k_cr) < start); - - /* get start sys_clk count */ - cstart = readl(&gpt1_base->tcrr); - - /* wait for 40 cycles */ - while (readl(&s32k_base->s32k_cr) < (start + 20)) ; - cend = readl(&gpt1_base->tcrr); /* get end sys_clk count */ - cdiff = cend - cstart; /* get elapsed ticks */ - cdiff *= cdiv; - - /* based on number of ticks assign speed */ - if (cdiff > 19000) - return S38_4M; - else if (cdiff > 15200) - return S26M; - else if (cdiff > 13000) - return S24M; - else if (cdiff > 9000) - return S19_2M; - else if (cdiff > 7600) - return S13M; - else - return S12M; -} - -/****************************************************************************** - * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on - * input oscillator clock frequency. - *****************************************************************************/ -void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) -{ - switch(osc_clk) { - case S38_4M: - *sys_clkin_sel = 4; - break; - case S26M: - *sys_clkin_sel = 3; - break; - case S19_2M: - *sys_clkin_sel = 2; - break; - case S13M: - *sys_clkin_sel = 1; - break; - case S12M: - default: - *sys_clkin_sel = 0; - } -} - -/* - * OMAP34XX/35XX specific functions - */ - -static void dpll3_init_34xx(u32 sil_index, u32 clk_index) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - dpll_param *ptr = (dpll_param *) get_core_dpll_param(); - void (*f_lock_pll) (u32, u32, u32, u32); - int xip_safe, p0, p1, p2, p3; - - xip_safe = is_running_in_sram(); - - /* Moving to the right sysclk and ES rev base */ - ptr = ptr + (3 * clk_index) + sil_index; - - if (xip_safe) { - /* - * CORE DPLL - */ - clrsetbits_le32(&prcm_base->clken_pll, - 0x00000007, PLL_FAST_RELOCK_BYPASS); - wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen, - LDELAY); - - /* - * For OMAP3 ES1.0 Errata 1.50, default value directly doesn't - * work. write another value and then default value. - */ - - /* CM_CLKSEL1_EMU[DIV_DPLL3] */ - clrsetbits_le32(&prcm_base->clksel1_emu, - 0x001F0000, (CORE_M3X2 + 1) << 16) ; - clrsetbits_le32(&prcm_base->clksel1_emu, - 0x001F0000, CORE_M3X2 << 16); - - /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ - clrsetbits_le32(&prcm_base->clksel1_pll, - 0xF8000000, ptr->m2 << 27); - - /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ - clrsetbits_le32(&prcm_base->clksel1_pll, - 0x07FF0000, ptr->m << 16); - - /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ - clrsetbits_le32(&prcm_base->clksel1_pll, - 0x00007F00, ptr->n << 8); - - /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ - clrbits_le32(&prcm_base->clksel1_pll, 0x00000040); - - /* SSI */ - clrsetbits_le32(&prcm_base->clksel_core, - 0x00000F00, CORE_SSI_DIV << 8); - /* FSUSB */ - clrsetbits_le32(&prcm_base->clksel_core, - 0x00000030, CORE_FUSB_DIV << 4); - /* L4 */ - clrsetbits_le32(&prcm_base->clksel_core, - 0x0000000C, CORE_L4_DIV << 2); - /* L3 */ - clrsetbits_le32(&prcm_base->clksel_core, - 0x00000003, CORE_L3_DIV); - /* GFX */ - clrsetbits_le32(&prcm_base->clksel_gfx, - 0x00000007, GFX_DIV); - /* RESET MGR */ - clrsetbits_le32(&prcm_base->clksel_wkup, - 0x00000006, WKUP_RSM << 1); - /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ - clrsetbits_le32(&prcm_base->clken_pll, - 0x000000F0, ptr->fsel << 4); - /* LOCK MODE */ - clrsetbits_le32(&prcm_base->clken_pll, - 0x00000007, PLL_LOCK); - - wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen, - LDELAY); - } else if (is_running_in_flash()) { - /* - * if running from flash, jump to small relocated code - * area in SRAM. - */ - f_lock_pll = (void *) (SRAM_CLK_CODE); - - p0 = readl(&prcm_base->clken_pll); - clrsetbits_le32(&p0, 0x00000007, PLL_FAST_RELOCK_BYPASS); - /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ - clrsetbits_le32(&p0, 0x000000F0, ptr->fsel << 4); - - p1 = readl(&prcm_base->clksel1_pll); - /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ - clrsetbits_le32(&p1, 0xF8000000, ptr->m2 << 27); - /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ - clrsetbits_le32(&p1, 0x07FF0000, ptr->m << 16); - /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ - clrsetbits_le32(&p1, 0x00007F00, ptr->n << 8); - /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ - clrbits_le32(&p1, 0x00000040); - - p2 = readl(&prcm_base->clksel_core); - /* SSI */ - clrsetbits_le32(&p2, 0x00000F00, CORE_SSI_DIV << 8); - /* FSUSB */ - clrsetbits_le32(&p2, 0x00000030, CORE_FUSB_DIV << 4); - /* L4 */ - clrsetbits_le32(&p2, 0x0000000C, CORE_L4_DIV << 2); - /* L3 */ - clrsetbits_le32(&p2, 0x00000003, CORE_L3_DIV); - - p3 = (u32)&prcm_base->idlest_ckgen; - - (*f_lock_pll) (p0, p1, p2, p3); - } -} - -static void dpll4_init_34xx(u32 sil_index, u32 clk_index) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - dpll_param *ptr = (dpll_param *) get_per_dpll_param(); - - /* Moving it to the right sysclk base */ - ptr = ptr + clk_index; - - /* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */ - clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_STOP << 16); - wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY); - - /* - * Errata 1.50 Workaround for OMAP3 ES1.0 only - * If using default divisors, write default divisor + 1 - * and then the actual divisor value - */ - /* M6 */ - clrsetbits_le32(&prcm_base->clksel1_emu, - 0x1F000000, (PER_M6X2 + 1) << 24); - clrsetbits_le32(&prcm_base->clksel1_emu, - 0x1F000000, PER_M6X2 << 24); - /* M5 */ - clrsetbits_le32(&prcm_base->clksel_cam, 0x0000001F, (PER_M5X2 + 1)); - clrsetbits_le32(&prcm_base->clksel_cam, 0x0000001F, PER_M5X2); - /* M4 */ - clrsetbits_le32(&prcm_base->clksel_dss, 0x0000001F, (PER_M4X2 + 1)); - clrsetbits_le32(&prcm_base->clksel_dss, 0x0000001F, PER_M4X2); - /* M3 */ - clrsetbits_le32(&prcm_base->clksel_dss, - 0x00001F00, (PER_M3X2 + 1) << 8); - clrsetbits_le32(&prcm_base->clksel_dss, - 0x00001F00, PER_M3X2 << 8); - /* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */ - clrsetbits_le32(&prcm_base->clksel3_pll, 0x0000001F, (ptr->m2 + 1)); - clrsetbits_le32(&prcm_base->clksel3_pll, 0x0000001F, ptr->m2); - /* Workaround end */ - - /* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:18] */ - clrsetbits_le32(&prcm_base->clksel2_pll, - 0x0007FF00, ptr->m << 8); - - /* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */ - clrsetbits_le32(&prcm_base->clksel2_pll, 0x0000007F, ptr->n); - - /* FREQSEL (PERIPH_DPLL_FREQSEL): CM_CLKEN_PLL[20:23] */ - clrsetbits_le32(&prcm_base->clken_pll, 0x00F00000, ptr->fsel << 20); - - /* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */ - clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_LOCK << 16); - wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY); -} - -static void dpll5_init_34xx(u32 sil_index, u32 clk_index) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - dpll_param *ptr = (dpll_param *) get_per2_dpll_param(); - - /* Moving it to the right sysclk base */ - ptr = ptr + clk_index; - - /* PER2 DPLL (DPLL5) */ - clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_STOP); - wait_on_value(1, 0, &prcm_base->idlest2_ckgen, LDELAY); - /* set M2 (usbtll_fck) */ - clrsetbits_le32(&prcm_base->clksel5_pll, 0x0000001F, ptr->m2); - /* set m (11-bit multiplier) */ - clrsetbits_le32(&prcm_base->clksel4_pll, 0x0007FF00, ptr->m << 8); - /* set n (7-bit divider)*/ - clrsetbits_le32(&prcm_base->clksel4_pll, 0x0000007F, ptr->n); - /* FREQSEL */ - clrsetbits_le32(&prcm_base->clken_pll, 0x000000F0, ptr->fsel << 4); - /* lock mode */ - clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_LOCK); - wait_on_value(1, 1, &prcm_base->idlest2_ckgen, LDELAY); -} - -static void mpu_init_34xx(u32 sil_index, u32 clk_index) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - dpll_param *ptr = (dpll_param *) get_mpu_dpll_param(); - - /* Moving to the right sysclk and ES rev base */ - ptr = ptr + (3 * clk_index) + sil_index; - - /* MPU DPLL (unlocked already) */ - - /* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */ - clrsetbits_le32(&prcm_base->clksel2_pll_mpu, - 0x0000001F, ptr->m2); - - /* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */ - clrsetbits_le32(&prcm_base->clksel1_pll_mpu, - 0x0007FF00, ptr->m << 8); - - /* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */ - clrsetbits_le32(&prcm_base->clksel1_pll_mpu, - 0x0000007F, ptr->n); - - /* FREQSEL (MPU_DPLL_FREQSEL) : CM_CLKEN_PLL_MPU[4:7] */ - clrsetbits_le32(&prcm_base->clken_pll_mpu, - 0x000000F0, ptr->fsel << 4); -} - -static void iva_init_34xx(u32 sil_index, u32 clk_index) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - dpll_param *ptr = (dpll_param *) get_iva_dpll_param(); - - /* Moving to the right sysclk and ES rev base */ - ptr = ptr + (3 * clk_index) + sil_index; - - /* IVA DPLL */ - /* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */ - clrsetbits_le32(&prcm_base->clken_pll_iva2, - 0x00000007, PLL_STOP); - wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY); - - /* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */ - clrsetbits_le32(&prcm_base->clksel2_pll_iva2, - 0x0000001F, ptr->m2); - - /* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */ - clrsetbits_le32(&prcm_base->clksel1_pll_iva2, - 0x0007FF00, ptr->m << 8); - - /* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */ - clrsetbits_le32(&prcm_base->clksel1_pll_iva2, - 0x0000007F, ptr->n); - - /* FREQSEL (IVA2_DPLL_FREQSEL) : CM_CLKEN_PLL_IVA2[4:7] */ - clrsetbits_le32(&prcm_base->clken_pll_iva2, - 0x000000F0, ptr->fsel << 4); - - /* LOCK MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */ - clrsetbits_le32(&prcm_base->clken_pll_iva2, - 0x00000007, PLL_LOCK); - - wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY); -} - -/* - * OMAP3630 specific functions - */ - -static void dpll3_init_36xx(u32 sil_index, u32 clk_index) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - dpll_param *ptr = (dpll_param *) get_36x_core_dpll_param(); - void (*f_lock_pll) (u32, u32, u32, u32); - int xip_safe, p0, p1, p2, p3; - - xip_safe = is_running_in_sram(); - - /* Moving it to the right sysclk base */ - ptr += clk_index; - - if (xip_safe) { - /* CORE DPLL */ - - /* Select relock bypass: CM_CLKEN_PLL[0:2] */ - clrsetbits_le32(&prcm_base->clken_pll, - 0x00000007, PLL_FAST_RELOCK_BYPASS); - wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen, - LDELAY); - - /* CM_CLKSEL1_EMU[DIV_DPLL3] */ - clrsetbits_le32(&prcm_base->clksel1_emu, - 0x001F0000, CORE_M3X2 << 16); - - /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ - clrsetbits_le32(&prcm_base->clksel1_pll, - 0xF8000000, ptr->m2 << 27); - - /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ - clrsetbits_le32(&prcm_base->clksel1_pll, - 0x07FF0000, ptr->m << 16); - - /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ - clrsetbits_le32(&prcm_base->clksel1_pll, - 0x00007F00, ptr->n << 8); - - /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ - clrbits_le32(&prcm_base->clksel1_pll, 0x00000040); - - /* SSI */ - clrsetbits_le32(&prcm_base->clksel_core, - 0x00000F00, CORE_SSI_DIV << 8); - /* FSUSB */ - clrsetbits_le32(&prcm_base->clksel_core, - 0x00000030, CORE_FUSB_DIV << 4); - /* L4 */ - clrsetbits_le32(&prcm_base->clksel_core, - 0x0000000C, CORE_L4_DIV << 2); - /* L3 */ - clrsetbits_le32(&prcm_base->clksel_core, - 0x00000003, CORE_L3_DIV); - /* GFX */ - clrsetbits_le32(&prcm_base->clksel_gfx, - 0x00000007, GFX_DIV_36X); - /* RESET MGR */ - clrsetbits_le32(&prcm_base->clksel_wkup, - 0x00000006, WKUP_RSM << 1); - /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ - clrsetbits_le32(&prcm_base->clken_pll, - 0x000000F0, ptr->fsel << 4); - /* LOCK MODE */ - clrsetbits_le32(&prcm_base->clken_pll, - 0x00000007, PLL_LOCK); - - wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen, - LDELAY); - } else if (is_running_in_flash()) { - /* - * if running from flash, jump to small relocated code - * area in SRAM. - */ - f_lock_pll = (void *) (SRAM_CLK_CODE); - - p0 = readl(&prcm_base->clken_pll); - clrsetbits_le32(&p0, 0x00000007, PLL_FAST_RELOCK_BYPASS); - /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ - clrsetbits_le32(&p0, 0x000000F0, ptr->fsel << 4); - - p1 = readl(&prcm_base->clksel1_pll); - /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ - clrsetbits_le32(&p1, 0xF8000000, ptr->m2 << 27); - /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ - clrsetbits_le32(&p1, 0x07FF0000, ptr->m << 16); - /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ - clrsetbits_le32(&p1, 0x00007F00, ptr->n << 8); - /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ - clrbits_le32(&p1, 0x00000040); - - p2 = readl(&prcm_base->clksel_core); - /* SSI */ - clrsetbits_le32(&p2, 0x00000F00, CORE_SSI_DIV << 8); - /* FSUSB */ - clrsetbits_le32(&p2, 0x00000030, CORE_FUSB_DIV << 4); - /* L4 */ - clrsetbits_le32(&p2, 0x0000000C, CORE_L4_DIV << 2); - /* L3 */ - clrsetbits_le32(&p2, 0x00000003, CORE_L3_DIV); - - p3 = (u32)&prcm_base->idlest_ckgen; - - (*f_lock_pll) (p0, p1, p2, p3); - } -} - -static void dpll4_init_36xx(u32 sil_index, u32 clk_index) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - struct dpll_per_36x_param *ptr; - - ptr = (struct dpll_per_36x_param *)get_36x_per_dpll_param(); - - /* Moving it to the right sysclk base */ - ptr += clk_index; - - /* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */ - clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_STOP << 16); - wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY); - - /* M6 (DIV_DPLL4): CM_CLKSEL1_EMU[24:29] */ - clrsetbits_le32(&prcm_base->clksel1_emu, 0x3F000000, ptr->m6 << 24); - - /* M5 (CLKSEL_CAM): CM_CLKSEL1_EMU[0:5] */ - clrsetbits_le32(&prcm_base->clksel_cam, 0x0000003F, ptr->m5); - - /* M4 (CLKSEL_DSS1): CM_CLKSEL_DSS[0:5] */ - clrsetbits_le32(&prcm_base->clksel_dss, 0x0000003F, ptr->m4); - - /* M3 (CLKSEL_DSS1): CM_CLKSEL_DSS[8:13] */ - clrsetbits_le32(&prcm_base->clksel_dss, 0x00003F00, ptr->m3 << 8); - - /* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */ - clrsetbits_le32(&prcm_base->clksel3_pll, 0x0000001F, ptr->m2); - - /* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:19] */ - clrsetbits_le32(&prcm_base->clksel2_pll, 0x000FFF00, ptr->m << 8); - - /* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */ - clrsetbits_le32(&prcm_base->clksel2_pll, 0x0000007F, ptr->n); - - /* M2DIV (CLKSEL_96M): CM_CLKSEL_CORE[12:13] */ - clrsetbits_le32(&prcm_base->clksel_core, 0x00003000, ptr->m2div << 12); - - /* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */ - clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_LOCK << 16); - wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY); -} - -static void dpll5_init_36xx(u32 sil_index, u32 clk_index) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - dpll_param *ptr = (dpll_param *) get_36x_per2_dpll_param(); - - /* Moving it to the right sysclk base */ - ptr = ptr + clk_index; - - /* PER2 DPLL (DPLL5) */ - clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_STOP); - wait_on_value(1, 0, &prcm_base->idlest2_ckgen, LDELAY); - /* set M2 (usbtll_fck) */ - clrsetbits_le32(&prcm_base->clksel5_pll, 0x0000001F, ptr->m2); - /* set m (11-bit multiplier) */ - clrsetbits_le32(&prcm_base->clksel4_pll, 0x0007FF00, ptr->m << 8); - /* set n (7-bit divider)*/ - clrsetbits_le32(&prcm_base->clksel4_pll, 0x0000007F, ptr->n); - /* lock mode */ - clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_LOCK); - wait_on_value(1, 1, &prcm_base->idlest2_ckgen, LDELAY); -} - -static void mpu_init_36xx(u32 sil_index, u32 clk_index) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - dpll_param *ptr = (dpll_param *) get_36x_mpu_dpll_param(); - - /* Moving to the right sysclk */ - ptr += clk_index; - - /* MPU DPLL (unlocked already */ - - /* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */ - clrsetbits_le32(&prcm_base->clksel2_pll_mpu, 0x0000001F, ptr->m2); - - /* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */ - clrsetbits_le32(&prcm_base->clksel1_pll_mpu, 0x0007FF00, ptr->m << 8); - - /* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */ - clrsetbits_le32(&prcm_base->clksel1_pll_mpu, 0x0000007F, ptr->n); -} - -static void iva_init_36xx(u32 sil_index, u32 clk_index) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - dpll_param *ptr = (dpll_param *)get_36x_iva_dpll_param(); - - /* Moving to the right sysclk */ - ptr += clk_index; - - /* IVA DPLL */ - /* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */ - clrsetbits_le32(&prcm_base->clken_pll_iva2, 0x00000007, PLL_STOP); - wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY); - - /* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */ - clrsetbits_le32(&prcm_base->clksel2_pll_iva2, 0x0000001F, ptr->m2); - - /* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */ - clrsetbits_le32(&prcm_base->clksel1_pll_iva2, 0x0007FF00, ptr->m << 8); - - /* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */ - clrsetbits_le32(&prcm_base->clksel1_pll_iva2, 0x0000007F, ptr->n); - - /* LOCK (MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */ - clrsetbits_le32(&prcm_base->clken_pll_iva2, 0x00000007, PLL_LOCK); - - wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY); -} - -/****************************************************************************** - * prcm_init() - inits clocks for PRCM as defined in clocks.h - * called from SRAM, or Flash (using temp SRAM stack). - *****************************************************************************/ -void prcm_init(void) -{ - u32 osc_clk = 0, sys_clkin_sel; - u32 clk_index, sil_index = 0; - struct prm *prm_base = (struct prm *)PRM_BASE; - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - - /* - * Gauge the input clock speed and find out the sys_clkin_sel - * value corresponding to the input clock. - */ - osc_clk = get_osc_clk_speed(); - get_sys_clkin_sel(osc_clk, &sys_clkin_sel); - - /* set input crystal speed */ - clrsetbits_le32(&prm_base->clksel, 0x00000007, sys_clkin_sel); - - /* If the input clock is greater than 19.2M always divide/2 */ - if (sys_clkin_sel > 2) { - /* input clock divider */ - clrsetbits_le32(&prm_base->clksrc_ctrl, 0x000000C0, 2 << 6); - clk_index = sys_clkin_sel / 2; - } else { - /* input clock divider */ - clrsetbits_le32(&prm_base->clksrc_ctrl, 0x000000C0, 1 << 6); - clk_index = sys_clkin_sel; - } - - if (get_cpu_family() == CPU_OMAP36XX) { - /* - * In warm reset conditions on OMAP36xx/AM/DM37xx - * the rom code incorrectly sets the DPLL4 clock - * input divider to /6.5. Section 3.5.3.3.3.2.1 of - * the AM/DM37x TRM explains that the /6.5 divider - * is used only when the input clock is 13MHz. - * - * If the part is in this cpu family *and* the input - * clock *is not* 13 MHz, then reset the DPLL4 clock - * input divider to /1 as it should never set to /6.5 - * in this case. - */ - if (sys_clkin_sel != 1) { /* 13 MHz */ - /* Bit 8: DPLL4_CLKINP_DIV */ - clrbits_le32(&prm_base->clksrc_ctrl, 0x00000100); - } - - /* Unlock MPU DPLL (slows things down, and needed later) */ - clrsetbits_le32(&prcm_base->clken_pll_mpu, - 0x00000007, PLL_LOW_POWER_BYPASS); - wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, - LDELAY); - - dpll3_init_36xx(0, clk_index); - dpll4_init_36xx(0, clk_index); - dpll5_init_36xx(0, clk_index); - iva_init_36xx(0, clk_index); - mpu_init_36xx(0, clk_index); - - /* Lock MPU DPLL to set frequency */ - clrsetbits_le32(&prcm_base->clken_pll_mpu, - 0x00000007, PLL_LOCK); - wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, - LDELAY); - } else { - /* - * The DPLL tables are defined according to sysclk value and - * silicon revision. The clk_index value will be used to get - * the values for that input sysclk from the DPLL param table - * and sil_index will get the values for that SysClk for the - * appropriate silicon rev. - */ - if (((get_cpu_family() == CPU_OMAP34XX) - && (get_cpu_rev() >= CPU_3XX_ES20)) || - (get_cpu_family() == CPU_AM35XX)) - sil_index = 1; - - /* Unlock MPU DPLL (slows things down, and needed later) */ - clrsetbits_le32(&prcm_base->clken_pll_mpu, - 0x00000007, PLL_LOW_POWER_BYPASS); - wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, - LDELAY); - - dpll3_init_34xx(sil_index, clk_index); - dpll4_init_34xx(sil_index, clk_index); - dpll5_init_34xx(sil_index, clk_index); - if (get_cpu_family() != CPU_AM35XX) - iva_init_34xx(sil_index, clk_index); - - mpu_init_34xx(sil_index, clk_index); - - /* Lock MPU DPLL to set frequency */ - clrsetbits_le32(&prcm_base->clken_pll_mpu, - 0x00000007, PLL_LOCK); - wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, - LDELAY); - } - - /* Set up GPTimers to sys_clk source only */ - setbits_le32(&prcm_base->clksel_per, 0x000000FF); - setbits_le32(&prcm_base->clksel_wkup, 1); - - sdelay(5000); -} - -/* - * Enable usb ehci uhh, tll clocks - */ -void ehci_clocks_enable(void) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - - /* Enable USBHOST_L3_ICLK (USBHOST_MICLK) */ - setbits_le32(&prcm_base->iclken_usbhost, 1); - /* - * Enable USBHOST_48M_FCLK (USBHOST_FCLK1) - * and USBHOST_120M_FCLK (USBHOST_FCLK2) - */ - setbits_le32(&prcm_base->fclken_usbhost, 0x00000003); - /* Enable USBTTL_ICLK */ - setbits_le32(&prcm_base->iclken3_core, 0x00000004); - /* Enable USBTTL_FCLK */ - setbits_le32(&prcm_base->fclken3_core, 0x00000004); -} - -/****************************************************************************** - * peripheral_enable() - Enable the clks & power for perifs (GPT2, UART1,...) - *****************************************************************************/ -void per_clocks_enable(void) -{ - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - - /* Enable GP2 timer. */ - setbits_le32(&prcm_base->clksel_per, 0x01); /* GPT2 = sys clk */ - setbits_le32(&prcm_base->iclken_per, 0x08); /* ICKen GPT2 */ - setbits_le32(&prcm_base->fclken_per, 0x08); /* FCKen GPT2 */ - - /* Enable GP9 timer. */ - setbits_le32(&prcm_base->clksel_per, 0x80); /* GPT9 = 32kHz clk */ - setbits_le32(&prcm_base->iclken_per, 0x400); /* ICKen GPT9 */ - setbits_le32(&prcm_base->fclken_per, 0x400); /* FCKen GPT9 */ - -#ifdef CONFIG_SYS_NS16550 - /* Enable UART1 clocks */ - setbits_le32(&prcm_base->fclken1_core, 0x00002000); - setbits_le32(&prcm_base->iclken1_core, 0x00002000); - - /* Enable UART2 clocks */ - setbits_le32(&prcm_base->fclken1_core, 0x00004000); - setbits_le32(&prcm_base->iclken1_core, 0x00004000); - - /* UART 3 Clocks */ - setbits_le32(&prcm_base->fclken_per, 0x00000800); - setbits_le32(&prcm_base->iclken_per, 0x00000800); -#endif - -#ifdef CONFIG_OMAP3_GPIO_2 - setbits_le32(&prcm_base->fclken_per, 0x00002000); - setbits_le32(&prcm_base->iclken_per, 0x00002000); -#endif -#ifdef CONFIG_OMAP3_GPIO_3 - setbits_le32(&prcm_base->fclken_per, 0x00004000); - setbits_le32(&prcm_base->iclken_per, 0x00004000); -#endif -#ifdef CONFIG_OMAP3_GPIO_4 - setbits_le32(&prcm_base->fclken_per, 0x00008000); - setbits_le32(&prcm_base->iclken_per, 0x00008000); -#endif -#ifdef CONFIG_OMAP3_GPIO_5 - setbits_le32(&prcm_base->fclken_per, 0x00010000); - setbits_le32(&prcm_base->iclken_per, 0x00010000); -#endif -#ifdef CONFIG_OMAP3_GPIO_6 - setbits_le32(&prcm_base->fclken_per, 0x00020000); - setbits_le32(&prcm_base->iclken_per, 0x00020000); -#endif - -#ifdef CONFIG_SYS_I2C_OMAP34XX - /* Turn on all 3 I2C clocks */ - setbits_le32(&prcm_base->fclken1_core, 0x00038000); - setbits_le32(&prcm_base->iclken1_core, 0x00038000); /* I2C1,2,3 = on */ -#endif - /* Enable the ICLK for 32K Sync Timer as its used in udelay */ - setbits_le32(&prcm_base->iclken_wkup, 0x00000004); - - if (get_cpu_family() != CPU_AM35XX) - out_le32(&prcm_base->fclken_iva2, FCK_IVA2_ON); - - out_le32(&prcm_base->fclken1_core, FCK_CORE1_ON); - out_le32(&prcm_base->iclken1_core, ICK_CORE1_ON); - out_le32(&prcm_base->iclken2_core, ICK_CORE2_ON); - out_le32(&prcm_base->fclken_wkup, FCK_WKUP_ON); - out_le32(&prcm_base->iclken_wkup, ICK_WKUP_ON); - out_le32(&prcm_base->fclken_dss, FCK_DSS_ON); - out_le32(&prcm_base->iclken_dss, ICK_DSS_ON); - if (get_cpu_family() != CPU_AM35XX) { - out_le32(&prcm_base->fclken_cam, FCK_CAM_ON); - out_le32(&prcm_base->iclken_cam, ICK_CAM_ON); - } - - sdelay(1000); -} diff --git a/arch/arm/cpu/armv7/omap3/config.mk b/arch/arm/cpu/armv7/omap3/config.mk deleted file mode 100644 index ad44d63..0000000 --- a/arch/arm/cpu/armv7/omap3/config.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -# Copyright 2011 Linaro Limited -# -# (C) Copyright 2010 -# Texas Instruments, -# -# Aneesh V -# -# SPDX-License-Identifier: GPL-2.0+ -# -ifdef CONFIG_SPL_BUILD -ALL-y += MLO -else -ALL-y += u-boot.img -endif diff --git a/arch/arm/cpu/armv7/omap3/emac.c b/arch/arm/cpu/armv7/omap3/emac.c deleted file mode 100644 index 37f4b8b..0000000 --- a/arch/arm/cpu/armv7/omap3/emac.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * - * DaVinci EMAC initialization. - * - * (C) Copyright 2011, Ilya Yanok, Emcraft Systems - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -/* - * Initializes on-chip ethernet controllers. - * to override, implement board_eth_init() - */ -int cpu_eth_init(bd_t *bis) -{ - u32 reset; - - /* ensure that the module is out of reset */ - reset = readl(&am35x_scm_general_regs->ip_sw_reset); - reset &= ~CPGMACSS_SW_RST; - writel(reset, &am35x_scm_general_regs->ip_sw_reset); - - return davinci_emac_initialize(); -} diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c deleted file mode 100644 index a2aadc9..0000000 --- a/arch/arm/cpu/armv7/omap3/emif4.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Author : - * Vaibhav Hiremath - * - * Based on mem.c and sdrc.c - * - * Copyright (C) 2010 - * Texas Instruments Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; -extern omap3_sysinfo sysinfo; - -static emif4_t *emif4_base = (emif4_t *)OMAP34XX_SDRC_BASE; - -/* - * is_mem_sdr - - * - Return 1 if mem type in use is SDR - */ -u32 is_mem_sdr(void) -{ - return 0; -} - -/* - * get_sdr_cs_size - - * - Get size of chip select 0/1 - */ -u32 get_sdr_cs_size(u32 cs) -{ - u32 size = 0; - - /* TODO: Calculate the size based on EMIF4 configuration */ - if (cs == CS0) - size = CONFIG_SYS_CS0_SIZE; - - return size; -} - -/* - * get_sdr_cs_offset - - * - Get offset of cs from cs0 start - */ -u32 get_sdr_cs_offset(u32 cs) -{ - u32 offset = 0; - - return offset; -} - -/* - * do_emif4_init - - * - Init the emif4 module for DDR access - * - Early init routines, called from flash or SRAM. - */ -static void do_emif4_init(void) -{ - unsigned int regval; - /* Set the DDR PHY parameters in PHY ctrl registers */ - regval = (EMIF4_DDR1_READ_LAT | EMIF4_DDR1_PWRDN_DIS | - EMIF4_DDR1_EXT_STRB_DIS); - writel(regval, &emif4_base->ddr_phyctrl1); - writel(regval, &emif4_base->ddr_phyctrl1_shdw); - writel(0, &emif4_base->ddr_phyctrl2); - - /* Reset the DDR PHY and wait till completed */ - regval = readl(&emif4_base->sdram_iodft_tlgc); - regval |= (1<<10); - writel(regval, &emif4_base->sdram_iodft_tlgc); - /*Wait till that bit clears*/ - while ((readl(&emif4_base->sdram_iodft_tlgc) & (1<<10)) == 0x1); - /*Re-verify the DDR PHY status*/ - while ((readl(&emif4_base->sdram_sts) & (1<<2)) == 0x0); - - regval |= (1<<0); - writel(regval, &emif4_base->sdram_iodft_tlgc); - /* Set SDR timing registers */ - regval = (EMIF4_TIM1_T_WTR | EMIF4_TIM1_T_RRD | - EMIF4_TIM1_T_RC | EMIF4_TIM1_T_RAS | - EMIF4_TIM1_T_WR | EMIF4_TIM1_T_RCD | - EMIF4_TIM1_T_RP); - writel(regval, &emif4_base->sdram_time1); - writel(regval, &emif4_base->sdram_time1_shdw); - - regval = (EMIF4_TIM2_T_CKE | EMIF4_TIM2_T_RTP | - EMIF4_TIM2_T_XSRD | EMIF4_TIM2_T_XSNR | - EMIF4_TIM2_T_ODT | EMIF4_TIM2_T_XP); - writel(regval, &emif4_base->sdram_time2); - writel(regval, &emif4_base->sdram_time2_shdw); - - regval = (EMIF4_TIM3_T_RAS_MAX | EMIF4_TIM3_T_RFC); - writel(regval, &emif4_base->sdram_time3); - writel(regval, &emif4_base->sdram_time3_shdw); - - /* Set the PWR control register */ - regval = (EMIF4_PWR_PM_TIM | EMIF4_PWR_LP_MODE | - EMIF4_PWR_DPD_DIS | EMIF4_PWR_IDLE_MODE); - writel(regval, &emif4_base->sdram_pwr_mgmt); - writel(regval, &emif4_base->sdram_pwr_mgmt_shdw); - - /* Set the DDR refresh rate control register */ - regval = (EMIF4_REFRESH_RATE | EMIF4_INITREF_DIS); - writel(regval, &emif4_base->sdram_refresh_ctrl); - writel(regval, &emif4_base->sdram_refresh_ctrl_shdw); - - /* set the SDRAM configuration register */ - regval = (EMIF4_CFG_PGSIZE | EMIF4_CFG_EBANK | - EMIF4_CFG_IBANK | EMIF4_CFG_ROWSIZE | - EMIF4_CFG_CL | EMIF4_CFG_NARROW_MD | - EMIF4_CFG_SDR_DRV | EMIF4_CFG_DDR_DIS_DLL | - EMIF4_CFG_DDR2_DDQS | EMIF4_CFG_DDR_TERM | - EMIF4_CFG_IBANK_POS | EMIF4_CFG_SDRAM_TYP); - writel(regval, &emif4_base->sdram_config); -} - -/* - * dram_init - - * - Sets uboots idea of sdram size - */ -int dram_init(void) -{ - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - /* - * If a second bank of DDR is attached to CS1 this is - * where it can be started. Early init code will init - * memory on CS0. - */ - if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) - size1 = get_sdr_cs_size(CS1); - - gd->ram_size = size0 + size1; - return 0; -} - -void dram_init_banksize (void) -{ - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - size1 = get_sdr_cs_size(CS1); - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; - gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); - gd->bd->bi_dram[1].size = size1; -} - -/* - * mem_init() - - * - Initialize memory subsystem - */ -void mem_init(void) -{ - do_emif4_init(); -} diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S deleted file mode 100644 index 1e58772..0000000 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ /dev/null @@ -1,476 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2008 - * Texas Instruments, - * - * Initial Code by: - * Richard Woodruff - * Syed Mohammed Khasim - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -/* - * Funtion for making PPA HAL API calls in secure devices - * Input: - * R0 - Service ID - * R1 - paramer list - */ -ENTRY(do_omap3_emu_romcode_call) - PUSH {r4-r12, lr} @ Save all registers from ROM code! - MOV r12, r0 @ Copy the Secure Service ID in R12 - MOV r3, r1 @ Copy the pointer to va_list in R3 - MOV r1, #0 @ Process ID - 0 - MOV r2, #OMAP3_EMU_HAL_START_HAL_CRITICAL @ Copy the pointer - @ to va_list in R3 - MOV r6, #0xFF @ Indicate new Task call - mcr p15, 0, r0, c7, c10, 4 @ DSB - mcr p15, 0, r0, c7, c10, 5 @ DMB - .word 0xe1600071 @ SMC #1 to call PPA service - hand assembled - @ because we use -march=armv5 - POP {r4-r12, pc} -ENDPROC(do_omap3_emu_romcode_call) - -#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT) -/************************************************************************** - * cpy_clk_code: relocates clock code into SRAM where its safer to execute - * R1 = SRAM destination address. - *************************************************************************/ -ENTRY(cpy_clk_code) - /* Copy DPLL code into SRAM */ - adr r0, go_to_speed /* copy from start of go_to_speed... */ - adr r2, lowlevel_init /* ... up to start of low_level_init */ -next2: - ldmia r0!, {r3 - r10} /* copy from source address [r0] */ - stmia r1!, {r3 - r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo next2 - mov pc, lr /* back to caller */ -ENDPROC(cpy_clk_code) - -/* *************************************************************************** - * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed - * -executed from SRAM. - * R0 = CM_CLKEN_PLL-bypass value - * R1 = CM_CLKSEL1_PLL-m, n, and divider values - * R2 = CM_CLKSEL_CORE-divider values - * R3 = CM_IDLEST_CKGEN - addr dpll lock wait - * - * Note: If core unlocks/relocks and SDRAM is running fast already it gets - * confused. A reset of the controller gets it back. Taking away its - * L3 when its not in self refresh seems bad for it. Normally, this - * code runs from flash before SDR is init so that should be ok. - ****************************************************************************/ -ENTRY(go_to_speed) - stmfd sp!, {r4 - r6} - - /* move into fast relock bypass */ - ldr r4, pll_ctl_add - str r0, [r4] -wait1: - ldr r5, [r3] /* get status */ - and r5, r5, #0x1 /* isolate core status */ - cmp r5, #0x1 /* still locked? */ - beq wait1 /* if lock, loop */ - - /* set new dpll dividers _after_ in bypass */ - ldr r5, pll_div_add1 - str r1, [r5] /* set m, n, m2 */ - ldr r5, pll_div_add2 - str r2, [r5] /* set l3/l4/.. dividers*/ - ldr r5, pll_div_add3 /* wkup */ - ldr r2, pll_div_val3 /* rsm val */ - str r2, [r5] - ldr r5, pll_div_add4 /* gfx */ - ldr r2, pll_div_val4 - str r2, [r5] - ldr r5, pll_div_add5 /* emu */ - ldr r2, pll_div_val5 - str r2, [r5] - - /* now prepare GPMC (flash) for new dpll speed */ - /* flash needs to be stable when we jump back to it */ - ldr r5, flash_cfg3_addr - ldr r2, flash_cfg3_val - str r2, [r5] - ldr r5, flash_cfg4_addr - ldr r2, flash_cfg4_val - str r2, [r5] - ldr r5, flash_cfg5_addr - ldr r2, flash_cfg5_val - str r2, [r5] - ldr r5, flash_cfg1_addr - ldr r2, [r5] - orr r2, r2, #0x3 /* up gpmc divider */ - str r2, [r5] - - /* lock DPLL3 and wait a bit */ - orr r0, r0, #0x7 /* set up for lock mode */ - str r0, [r4] /* lock */ - nop /* ARM slow at this point working at sys_clk */ - nop - nop - nop -wait2: - ldr r5, [r3] /* get status */ - and r5, r5, #0x1 /* isolate core status */ - cmp r5, #0x1 /* still locked? */ - bne wait2 /* if lock, loop */ - nop - nop - nop - nop - ldmfd sp!, {r4 - r6} - mov pc, lr /* back to caller, locked */ -ENDPROC(go_to_speed) - -_go_to_speed: .word go_to_speed - -/* these constants need to be close for PIC code */ -/* The Nor has to be in the Flash Base CS0 for this condition to happen */ -flash_cfg1_addr: - .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG1) -flash_cfg3_addr: - .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG3) -flash_cfg3_val: - .word STNOR_GPMC_CONFIG3 -flash_cfg4_addr: - .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG4) -flash_cfg4_val: - .word STNOR_GPMC_CONFIG4 -flash_cfg5_val: - .word STNOR_GPMC_CONFIG5 -flash_cfg5_addr: - .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG5) -pll_ctl_add: - .word CM_CLKEN_PLL -pll_div_add1: - .word CM_CLKSEL1_PLL -pll_div_add2: - .word CM_CLKSEL_CORE -pll_div_add3: - .word CM_CLKSEL_WKUP -pll_div_val3: - .word (WKUP_RSM << 1) -pll_div_add4: - .word CM_CLKSEL_GFX -pll_div_val4: - .word (GFX_DIV << 0) -pll_div_add5: - .word CM_CLKSEL1_EMU -pll_div_val5: - .word CLSEL1_EMU_VAL - -#endif - -ENTRY(lowlevel_init) - ldr sp, SRAM_STACK - str ip, [sp] /* stash ip register */ - mov ip, lr /* save link reg across call */ -#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT) -/* - * No need to copy/exec the clock code - DPLL adjust already done - * in NAND/oneNAND Boot. - */ - ldr r1, =SRAM_CLK_CODE - bl cpy_clk_code -#endif /* NAND Boot */ - mov lr, ip /* restore link reg */ - ldr ip, [sp] /* restore save ip */ - /* tail-call s_init to setup pll, mux, memory */ - b s_init - -ENDPROC(lowlevel_init) - - /* the literal pools origin */ - .ltorg - -REG_CONTROL_STATUS: - .word CONTROL_STATUS -SRAM_STACK: - .word LOW_LEVEL_SRAM_STACK - -/* DPLL(1-4) PARAM TABLES */ - -/* - * Each of the tables has M, N, FREQSEL, M2 values defined for nominal - * OPP (1.2V). The fields are defined according to dpll_param struct (clock.c). - * The values are defined for all possible sysclk and for ES1 and ES2. - */ - -mpu_dpll_param: -/* 12MHz */ -/* ES1 */ -.word MPU_M_12_ES1, MPU_N_12_ES1, MPU_FSEL_12_ES1, MPU_M2_12_ES1 -/* ES2 */ -.word MPU_M_12_ES2, MPU_N_12_ES2, MPU_FSEL_12_ES2, MPU_M2_ES2 -/* 3410 */ -.word MPU_M_12, MPU_N_12, MPU_FSEL_12, MPU_M2_12 - -/* 13MHz */ -/* ES1 */ -.word MPU_M_13_ES1, MPU_N_13_ES1, MPU_FSEL_13_ES1, MPU_M2_13_ES1 -/* ES2 */ -.word MPU_M_13_ES2, MPU_N_13_ES2, MPU_FSEL_13_ES2, MPU_M2_13_ES2 -/* 3410 */ -.word MPU_M_13, MPU_N_13, MPU_FSEL_13, MPU_M2_13 - -/* 19.2MHz */ -/* ES1 */ -.word MPU_M_19P2_ES1, MPU_N_19P2_ES1, MPU_FSEL_19P2_ES1, MPU_M2_19P2_ES1 -/* ES2 */ -.word MPU_M_19P2_ES2, MPU_N_19P2_ES2, MPU_FSEL_19P2_ES2, MPU_M2_19P2_ES2 -/* 3410 */ -.word MPU_M_19P2, MPU_N_19P2, MPU_FSEL_19P2, MPU_M2_19P2 - -/* 26MHz */ -/* ES1 */ -.word MPU_M_26_ES1, MPU_N_26_ES1, MPU_FSEL_26_ES1, MPU_M2_26_ES1 -/* ES2 */ -.word MPU_M_26_ES2, MPU_N_26_ES2, MPU_FSEL_26_ES2, MPU_M2_26_ES2 -/* 3410 */ -.word MPU_M_26, MPU_N_26, MPU_FSEL_26, MPU_M2_26 - -/* 38.4MHz */ -/* ES1 */ -.word MPU_M_38P4_ES1, MPU_N_38P4_ES1, MPU_FSEL_38P4_ES1, MPU_M2_38P4_ES1 -/* ES2 */ -.word MPU_M_38P4_ES2, MPU_N_38P4_ES2, MPU_FSEL_38P4_ES2, MPU_M2_38P4_ES2 -/* 3410 */ -.word MPU_M_38P4, MPU_N_38P4, MPU_FSEL_38P4, MPU_M2_38P4 - - -.globl get_mpu_dpll_param -get_mpu_dpll_param: - adr r0, mpu_dpll_param - mov pc, lr - -iva_dpll_param: -/* 12MHz */ -/* ES1 */ -.word IVA_M_12_ES1, IVA_N_12_ES1, IVA_FSEL_12_ES1, IVA_M2_12_ES1 -/* ES2 */ -.word IVA_M_12_ES2, IVA_N_12_ES2, IVA_FSEL_12_ES2, IVA_M2_12_ES2 -/* 3410 */ -.word IVA_M_12, IVA_N_12, IVA_FSEL_12, IVA_M2_12 - -/* 13MHz */ -/* ES1 */ -.word IVA_M_13_ES1, IVA_N_13_ES1, IVA_FSEL_13_ES1, IVA_M2_13_ES1 -/* ES2 */ -.word IVA_M_13_ES2, IVA_N_13_ES2, IVA_FSEL_13_ES2, IVA_M2_13_ES2 -/* 3410 */ -.word IVA_M_13, IVA_N_13, IVA_FSEL_13, IVA_M2_13 - -/* 19.2MHz */ -/* ES1 */ -.word IVA_M_19P2_ES1, IVA_N_19P2_ES1, IVA_FSEL_19P2_ES1, IVA_M2_19P2_ES1 -/* ES2 */ -.word IVA_M_19P2_ES2, IVA_N_19P2_ES2, IVA_FSEL_19P2_ES2, IVA_M2_19P2_ES2 -/* 3410 */ -.word IVA_M_19P2, IVA_N_19P2, IVA_FSEL_19P2, IVA_M2_19P2 - -/* 26MHz */ -/* ES1 */ -.word IVA_M_26_ES1, IVA_N_26_ES1, IVA_FSEL_26_ES1, IVA_M2_26_ES1 -/* ES2 */ -.word IVA_M_26_ES2, IVA_N_26_ES2, IVA_FSEL_26_ES2, IVA_M2_26_ES2 -/* 3410 */ -.word IVA_M_26, IVA_N_26, IVA_FSEL_26, IVA_M2_26 - -/* 38.4MHz */ -/* ES1 */ -.word IVA_M_38P4_ES1, IVA_N_38P4_ES1, IVA_FSEL_38P4_ES1, IVA_M2_38P4_ES1 -/* ES2 */ -.word IVA_M_38P4_ES2, IVA_N_38P4_ES2, IVA_FSEL_38P4_ES2, IVA_M2_38P4_ES2 -/* 3410 */ -.word IVA_M_38P4, IVA_N_38P4, IVA_FSEL_38P4, IVA_M2_38P4 - - -.globl get_iva_dpll_param -get_iva_dpll_param: - adr r0, iva_dpll_param - mov pc, lr - -/* Core DPLL targets for L3 at 166 & L133 */ -core_dpll_param: -/* 12MHz */ -/* ES1 */ -.word CORE_M_12_ES1, CORE_N_12_ES1, CORE_FSL_12_ES1, CORE_M2_12_ES1 -/* ES2 */ -.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12 -/* 3410 */ -.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12 - -/* 13MHz */ -/* ES1 */ -.word CORE_M_13_ES1, CORE_N_13_ES1, CORE_FSL_13_ES1, CORE_M2_13_ES1 -/* ES2 */ -.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13 -/* 3410 */ -.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13 - -/* 19.2MHz */ -/* ES1 */ -.word CORE_M_19P2_ES1, CORE_N_19P2_ES1, CORE_FSL_19P2_ES1, CORE_M2_19P2_ES1 -/* ES2 */ -.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2 -/* 3410 */ -.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2 - -/* 26MHz */ -/* ES1 */ -.word CORE_M_26_ES1, CORE_N_26_ES1, CORE_FSL_26_ES1, CORE_M2_26_ES1 -/* ES2 */ -.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26 -/* 3410 */ -.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26 - -/* 38.4MHz */ -/* ES1 */ -.word CORE_M_38P4_ES1, CORE_N_38P4_ES1, CORE_FSL_38P4_ES1, CORE_M2_38P4_ES1 -/* ES2 */ -.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4 -/* 3410 */ -.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4 - -.globl get_core_dpll_param -get_core_dpll_param: - adr r0, core_dpll_param - mov pc, lr - -/* PER DPLL values are same for both ES1 and ES2 */ -per_dpll_param: -/* 12MHz */ -.word PER_M_12, PER_N_12, PER_FSEL_12, PER_M2_12 - -/* 13MHz */ -.word PER_M_13, PER_N_13, PER_FSEL_13, PER_M2_13 - -/* 19.2MHz */ -.word PER_M_19P2, PER_N_19P2, PER_FSEL_19P2, PER_M2_19P2 - -/* 26MHz */ -.word PER_M_26, PER_N_26, PER_FSEL_26, PER_M2_26 - -/* 38.4MHz */ -.word PER_M_38P4, PER_N_38P4, PER_FSEL_38P4, PER_M2_38P4 - -.globl get_per_dpll_param -get_per_dpll_param: - adr r0, per_dpll_param - mov pc, lr - -/* PER2 DPLL values */ -per2_dpll_param: -/* 12MHz */ -.word PER2_M_12, PER2_N_12, PER2_FSEL_12, PER2_M2_12 - -/* 13MHz */ -.word PER2_M_13, PER2_N_13, PER2_FSEL_13, PER2_M2_13 - -/* 19.2MHz */ -.word PER2_M_19P2, PER2_N_19P2, PER2_FSEL_19P2, PER2_M2_19P2 - -/* 26MHz */ -.word PER2_M_26, PER2_N_26, PER2_FSEL_26, PER2_M2_26 - -/* 38.4MHz */ -.word PER2_M_38P4, PER2_N_38P4, PER2_FSEL_38P4, PER2_M2_38P4 - -.globl get_per2_dpll_param -get_per2_dpll_param: - adr r0, per2_dpll_param - mov pc, lr - -/* - * Tables for 36XX/37XX devices - * - */ -mpu_36x_dpll_param: -/* 12MHz */ -.word 50, 0, 0, 1 -/* 13MHz */ -.word 600, 12, 0, 1 -/* 19.2MHz */ -.word 125, 3, 0, 1 -/* 26MHz */ -.word 300, 12, 0, 1 -/* 38.4MHz */ -.word 125, 7, 0, 1 - -iva_36x_dpll_param: -/* 12MHz */ -.word 130, 2, 0, 1 -/* 13MHz */ -.word 20, 0, 0, 1 -/* 19.2MHz */ -.word 325, 11, 0, 1 -/* 26MHz */ -.word 10, 0, 0, 1 -/* 38.4MHz */ -.word 325, 23, 0, 1 - -core_36x_dpll_param: -/* 12MHz */ -.word 100, 2, 0, 1 -/* 13MHz */ -.word 400, 12, 0, 1 -/* 19.2MHz */ -.word 375, 17, 0, 1 -/* 26MHz */ -.word 200, 12, 0, 1 -/* 38.4MHz */ -.word 375, 35, 0, 1 - -per_36x_dpll_param: -/* SYSCLK M N M2 M3 M4 M5 M6 m2DIV */ -.word 12000, 360, 4, 9, 16, 5, 4, 3, 1 -.word 13000, 864, 12, 9, 16, 9, 4, 3, 1 -.word 19200, 360, 7, 9, 16, 5, 4, 3, 1 -.word 26000, 432, 12, 9, 16, 9, 4, 3, 1 -.word 38400, 360, 15, 9, 16, 5, 4, 3, 1 - -per2_36x_dpll_param: -/* 12MHz */ -.word PER2_36XX_M_12, PER2_36XX_N_12, 0, PER2_36XX_M2_12 -/* 13MHz */ -.word PER2_36XX_M_13, PER2_36XX_N_13, 0, PER2_36XX_M2_13 -/* 19.2MHz */ -.word PER2_36XX_M_19P2, PER2_36XX_N_19P2, 0, PER2_36XX_M2_19P2 -/* 26MHz */ -.word PER2_36XX_M_26, PER2_36XX_N_26, 0, PER2_36XX_M2_26 -/* 38.4MHz */ -.word PER2_36XX_M_38P4, PER2_36XX_N_38P4, 0, PER2_36XX_M2_38P4 - - -ENTRY(get_36x_mpu_dpll_param) - adr r0, mpu_36x_dpll_param - mov pc, lr -ENDPROC(get_36x_mpu_dpll_param) - -ENTRY(get_36x_iva_dpll_param) - adr r0, iva_36x_dpll_param - mov pc, lr -ENDPROC(get_36x_iva_dpll_param) - -ENTRY(get_36x_core_dpll_param) - adr r0, core_36x_dpll_param - mov pc, lr -ENDPROC(get_36x_core_dpll_param) - -ENTRY(get_36x_per_dpll_param) - adr r0, per_36x_dpll_param - mov pc, lr -ENDPROC(get_36x_per_dpll_param) - -ENTRY(get_36x_per2_dpll_param) - adr r0, per2_36x_dpll_param - mov pc, lr -ENDPROC(get_36x_per2_dpll_param) diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c deleted file mode 100644 index 4f15ac9..0000000 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Functions related to OMAP3 SDRC. - * - * This file has been created after exctracting and consolidating - * the SDRC related content from mem.c and board.c, also created - * generic init function (mem_init). - * - * Copyright (C) 2004-2010 - * Texas Instruments Incorporated - http://www.ti.com/ - * - * Copyright (C) 2011 - * Corscience GmbH & Co. KG - Simon Schwarz - * - * Author : - * Vaibhav Hiremath - * - * Original implementation by (mem.c, board.c) : - * Sunil Kumar - * Shashi Ranjan - * Manikandan Pillai - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; -extern omap3_sysinfo sysinfo; - -static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE; - -/* - * is_mem_sdr - - * - Return 1 if mem type in use is SDR - */ -u32 is_mem_sdr(void) -{ - if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR) - return 1; - return 0; -} - -/* - * make_cs1_contiguous - - * - When we have CS1 populated we want to have it mapped after cs0 to allow - * command line mem=xyz use all memory with out discontinuous support - * compiled in. We could do it in the ATAG, but there really is two banks... - */ -void make_cs1_contiguous(void) -{ - u32 size, a_add_low, a_add_high; - - size = get_sdr_cs_size(CS0); - size >>= 25; /* divide by 32 MiB to find size to offset CS1 */ - a_add_high = (size & 3) << 8; /* set up low field */ - a_add_low = (size & 0x3C) >> 2; /* set up high field */ - writel((a_add_high | a_add_low), &sdrc_base->cs_cfg); - -} - - -/* - * get_sdr_cs_size - - * - Get size of chip select 0/1 - */ -u32 get_sdr_cs_size(u32 cs) -{ - u32 size; - - /* get ram size field */ - size = readl(&sdrc_base->cs[cs].mcfg) >> 8; - size &= 0x3FF; /* remove unwanted bits */ - size <<= 21; /* multiply by 2 MiB to find size in MB */ - return size; -} - -/* - * get_sdr_cs_offset - - * - Get offset of cs from cs0 start - */ -u32 get_sdr_cs_offset(u32 cs) -{ - u32 offset; - - if (!cs) - return 0; - - offset = readl(&sdrc_base->cs_cfg); - offset = (offset & 15) << 27 | (offset & 0x300) << 17; - - return offset; -} - -/* - * write_sdrc_timings - - * - Takes CS and associated timings and initalize SDRAM - * - Test CS to make sure it's OK for use - */ -static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base, - struct board_sdrc_timings *timings) -{ - /* Setup timings we got from the board. */ - writel(timings->mcfg, &sdrc_base->cs[cs].mcfg); - writel(timings->ctrla, &sdrc_actim_base->ctrla); - writel(timings->ctrlb, &sdrc_actim_base->ctrlb); - writel(timings->rfr_ctrl, &sdrc_base->cs[cs].rfr_ctrl); - writel(CMD_NOP, &sdrc_base->cs[cs].manual); - writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); - writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); - writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); - writel(timings->mr, &sdrc_base->cs[cs].mr); - - /* - * Test ram in this bank - * Disable if bad or not present - */ - if (!mem_ok(cs)) - writel(0, &sdrc_base->cs[cs].mcfg); -} - -/* - * do_sdrc_init - - * - Code called once in C-Stack only context for CS0 and with early being - * true and a possible 2nd time depending on memory configuration from - * stack+global context. - */ -void do_sdrc_init(u32 cs, u32 early) -{ - struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1; - struct board_sdrc_timings timings; - - sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; - sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; - - /* set some default timings */ - timings.sharing = SDRC_SHARING; - - /* - * When called in the early context this may be SPL and we will - * need to set all of the timings. This ends up being board - * specific so we call a helper function to take care of this - * for us. Otherwise, to be safe, we need to copy the settings - * from the first bank to the second. We will setup CS0, - * then set cs_cfg to the appropriate value then try and - * setup CS1. - */ -#ifdef CONFIG_SPL_BUILD - /* set/modify board-specific timings */ - get_board_mem_timings(&timings); -#endif - if (early) { - /* reset sdrc controller */ - writel(SOFTRESET, &sdrc_base->sysconfig); - wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status, - 12000000); - writel(0, &sdrc_base->sysconfig); - - /* setup sdrc to ball mux */ - writel(timings.sharing, &sdrc_base->sharing); - - /* Disable Power Down of CKE because of 1 CKE on combo part */ - writel(WAKEUPPROC | SRFRONRESET | PAGEPOLICY_HIGH, - &sdrc_base->power); - - writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); - sdelay(0x20000); -#ifdef CONFIG_SPL_BUILD - write_sdrc_timings(CS0, sdrc_actim_base0, &timings); - make_cs1_contiguous(); - write_sdrc_timings(CS1, sdrc_actim_base1, &timings); -#endif - - } - - /* - * If we aren't using SPL we have been loaded by some - * other means which may not have correctly initialized - * both CS0 and CS1 (such as some older versions of x-loader) - * so we may be asked now to setup CS1. - */ - if (cs == CS1) { - timings.mcfg = readl(&sdrc_base->cs[CS0].mcfg), - timings.rfr_ctrl = readl(&sdrc_base->cs[CS0].rfr_ctrl); - timings.ctrla = readl(&sdrc_actim_base0->ctrla); - timings.ctrlb = readl(&sdrc_actim_base0->ctrlb); - timings.mr = readl(&sdrc_base->cs[CS0].mr); - write_sdrc_timings(cs, sdrc_actim_base1, &timings); - } -} - -/* - * dram_init - - * - Sets uboots idea of sdram size - */ -int dram_init(void) -{ - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - /* - * We always need to have cs_cfg point at where the second - * bank would be, if present. Failure to do so can lead to - * strange situations where memory isn't detected and - * configured correctly. CS0 will already have been setup - * at this point. - */ - make_cs1_contiguous(); - do_sdrc_init(CS1, NOT_EARLY); - size1 = get_sdr_cs_size(CS1); - - gd->ram_size = size0 + size1; - - return 0; -} - -void dram_init_banksize (void) -{ - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - size1 = get_sdr_cs_size(CS1); - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; - gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); - gd->bd->bi_dram[1].size = size1; -} - -/* - * mem_init - - * - Init the sdrc chip, - * - Selects CS0 and CS1, - */ -void mem_init(void) -{ - /* only init up first bank here */ - do_sdrc_init(CS0, EARLY_INIT); -} diff --git a/arch/arm/cpu/armv7/omap3/spl_id_nand.c b/arch/arm/cpu/armv7/omap3/spl_id_nand.c deleted file mode 100644 index 0e2f0a2..0000000 --- a/arch/arm/cpu/armv7/omap3/spl_id_nand.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * (C) Copyright 2011 - * Texas Instruments, - * - * Author : - * Tom Rini - * - * Initial Code from: - * Richard Woodruff - * Jian Zhang - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include - -/* - * Many boards will want to know the results of the NAND_CMD_READID command - * in order to decide what to do about DDR initialization. This function - * allows us to do that very early and to pass those results back to the - * board so it can make whatever decisions need to be made. - */ -int identify_nand_chip(int *mfr, int *id) -{ - int loops = 1000; - - /* Make sure that we have setup GPMC for NAND correctly. */ - set_gpmc_cs0(MTD_DEV_TYPE_NAND); - - sdelay(2000); - - /* Issue a RESET and then READID */ - writeb(NAND_CMD_RESET, &gpmc_cfg->cs[0].nand_cmd); - writeb(NAND_CMD_STATUS, &gpmc_cfg->cs[0].nand_cmd); - while ((readl(&gpmc_cfg->cs[0].nand_dat) & NAND_STATUS_READY) - != NAND_STATUS_READY) { - sdelay(100); - if (--loops == 0) - return 1; - } - writeb(NAND_CMD_READID, &gpmc_cfg->cs[0].nand_cmd); - - /* Set the address to read to 0x0 */ - writeb(0x0, &gpmc_cfg->cs[0].nand_adr); - - /* Read off the manufacturer and device id. */ - *mfr = readb(&gpmc_cfg->cs[0].nand_dat); - *id = readb(&gpmc_cfg->cs[0].nand_dat); - - return 0; -} diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c deleted file mode 100644 index 6818fab..0000000 --- a/arch/arm/cpu/armv7/omap3/sys_info.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * (C) Copyright 2008 - * Texas Instruments, - * - * Author : - * Manikandan Pillai - * - * Derived from Beagle Board and 3430 SDP code by - * Richard Woodruff - * Syed Mohammed Khasim - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include /* get mem tables */ -#include -#include - -#include -#include - -extern omap3_sysinfo sysinfo; -static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - -#ifdef CONFIG_DISPLAY_CPUINFO -static char *rev_s[CPU_3XX_MAX_REV] = { - "1.0", - "2.0", - "2.1", - "3.0", - "3.1", - "UNKNOWN", - "UNKNOWN", - "3.1.2"}; - -/* this is the revision table for 37xx CPUs */ -static char *rev_s_37xx[CPU_37XX_MAX_REV] = { - "1.0", - "1.1", - "1.2"}; -#endif /* CONFIG_DISPLAY_CPUINFO */ - -void omap_die_id(unsigned int *die_id) -{ - struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE; - - die_id[0] = readl(&id_base->die_id_0); - die_id[1] = readl(&id_base->die_id_1); - die_id[2] = readl(&id_base->die_id_2); - die_id[3] = readl(&id_base->die_id_3); -} - -/****************************************** - * get_cpu_type(void) - extract cpu info - ******************************************/ -u32 get_cpu_type(void) -{ - return readl(&ctrl_base->ctrl_omap_stat); -} - -/****************************************** - * get_cpu_id(void) - extract cpu id - * returns 0 for ES1.0, cpuid otherwise - ******************************************/ -u32 get_cpu_id(void) -{ - struct ctrl_id *id_base; - u32 cpuid = 0; - - /* - * On ES1.0 the IDCODE register is not exposed on L4 - * so using CPU ID to differentiate between ES1.0 and > ES1.0. - */ - __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid)); - if ((cpuid & 0xf) == 0x0) { - return 0; - } else { - /* Decode the IDs on > ES1.0 */ - id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE; - - cpuid = readl(&id_base->idcode); - } - - return cpuid; -} - -/****************************************** - * get_cpu_family(void) - extract cpu info - ******************************************/ -u32 get_cpu_family(void) -{ - u16 hawkeye; - u32 cpu_family; - u32 cpuid = get_cpu_id(); - - if (cpuid == 0) - return CPU_OMAP34XX; - - hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff; - switch (hawkeye) { - case HAWKEYE_OMAP34XX: - cpu_family = CPU_OMAP34XX; - break; - case HAWKEYE_AM35XX: - cpu_family = CPU_AM35XX; - break; - case HAWKEYE_OMAP36XX: - cpu_family = CPU_OMAP36XX; - break; - default: - cpu_family = CPU_OMAP34XX; - } - - return cpu_family; -} - -/****************************************** - * get_cpu_rev(void) - extract version info - ******************************************/ -u32 get_cpu_rev(void) -{ - u32 cpuid = get_cpu_id(); - - if (cpuid == 0) - return CPU_3XX_ES10; - else - return (cpuid >> CPU_3XX_ID_SHIFT) & 0xf; -} - -/***************************************************************** - * get_sku_id(void) - read sku_id to get info on max clock rate - *****************************************************************/ -u32 get_sku_id(void) -{ - struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE; - return readl(&id_base->sku_id) & SKUID_CLK_MASK; -} - -/*************************************************************************** - * get_gpmc0_base() - Return current address hardware will be - * fetching from. The below effectively gives what is correct, its a bit - * mis-leading compared to the TRM. For the most general case the mask - * needs to be also taken into account this does work in practice. - * - for u-boot we currently map: - * -- 0 to nothing, - * -- 4 to flash - * -- 8 to enent - * -- c to wifi - ****************************************************************************/ -u32 get_gpmc0_base(void) -{ - u32 b; - - b = readl(&gpmc_cfg->cs[0].config7); - b &= 0x1F; /* keep base [5:0] */ - b = b << 24; /* ret 0x0b000000 */ - return b; -} - -/******************************************************************* - * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand) - *******************************************************************/ -u32 get_gpmc0_width(void) -{ - return WIDTH_16BIT; -} - -/************************************************************************* - * get_board_rev() - setup to pass kernel board revision information - * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) - *************************************************************************/ -#ifdef CONFIG_REVISION_TAG -u32 __weak get_board_rev(void) -{ - return 0x20; -} -#endif - -/******************************************************** - * get_base(); get upper addr of current execution - *******************************************************/ -static u32 get_base(void) -{ - u32 val; - - __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory"); - val &= 0xF0000000; - val >>= 28; - return val; -} - -/******************************************************** - * is_running_in_flash() - tell if currently running in - * FLASH. - *******************************************************/ -u32 is_running_in_flash(void) -{ - if (get_base() < 4) - return 1; /* in FLASH */ - - return 0; /* running in SRAM or SDRAM */ -} - -/******************************************************** - * is_running_in_sram() - tell if currently running in - * SRAM. - *******************************************************/ -u32 is_running_in_sram(void) -{ - if (get_base() == 4) - return 1; /* in SRAM */ - - return 0; /* running in FLASH or SDRAM */ -} - -/******************************************************** - * is_running_in_sdram() - tell if currently running in - * SDRAM. - *******************************************************/ -u32 is_running_in_sdram(void) -{ - if (get_base() > 4) - return 1; /* in SDRAM */ - - return 0; /* running in SRAM or FLASH */ -} - -/*************************************************************** - * get_boot_type() - Is this an XIP type device or a stream one - * bits 4-0 specify type. Bit 5 says mem/perif - ***************************************************************/ -u32 get_boot_type(void) -{ - return (readl(&ctrl_base->status) & SYSBOOT_MASK); -} - -/************************************************************* - * get_device_type(): tell if GP/HS/EMU/TST - *************************************************************/ -u32 get_device_type(void) -{ - return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8); -} - -#ifdef CONFIG_DISPLAY_CPUINFO -/** - * Print CPU information - */ -int print_cpuinfo (void) -{ - char *cpu_family_s, *cpu_s, *sec_s, *max_clk; - - switch (get_cpu_family()) { - case CPU_OMAP34XX: - cpu_family_s = "OMAP"; - switch (get_cpu_type()) { - case OMAP3503: - cpu_s = "3503"; - break; - case OMAP3515: - cpu_s = "3515"; - break; - case OMAP3525: - cpu_s = "3525"; - break; - case OMAP3530: - cpu_s = "3530"; - break; - default: - cpu_s = "35XX"; - break; - } - if ((get_cpu_rev() >= CPU_3XX_ES31) && - (get_sku_id() == SKUID_CLK_720MHZ)) - max_clk = "720 MHz"; - else - max_clk = "600 MHz"; - - break; - case CPU_AM35XX: - cpu_family_s = "AM"; - switch (get_cpu_type()) { - case AM3505: - cpu_s = "3505"; - break; - case AM3517: - cpu_s = "3517"; - break; - default: - cpu_s = "35XX"; - break; - } - max_clk = "600 Mhz"; - break; - case CPU_OMAP36XX: - cpu_family_s = "OMAP"; - switch (get_cpu_type()) { - case OMAP3730: - cpu_s = "3630/3730"; - break; - default: - cpu_s = "36XX/37XX"; - break; - } - max_clk = "1 Ghz"; - break; - default: - cpu_family_s = "OMAP"; - cpu_s = "35XX"; - max_clk = "600 Mhz"; - } - - switch (get_device_type()) { - case TST_DEVICE: - sec_s = "TST"; - break; - case EMU_DEVICE: - sec_s = "EMU"; - break; - case HS_DEVICE: - sec_s = "HS"; - break; - case GP_DEVICE: - sec_s = "GP"; - break; - default: - sec_s = "?"; - } - - if (CPU_OMAP36XX == get_cpu_family()) - printf("%s%s-%s ES%s, CPU-OPP2, L3-200MHz, Max CPU Clock %s\n", - cpu_family_s, cpu_s, sec_s, - rev_s_37xx[get_cpu_rev()], max_clk); - else - printf("%s%s-%s ES%s, CPU-OPP2, L3-165MHz, Max CPU Clock %s\n", - cpu_family_s, cpu_s, sec_s, - rev_s[get_cpu_rev()], max_clk); - - return 0; -} -#endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/arm/cpu/armv7/omap4/Kconfig b/arch/arm/cpu/armv7/omap4/Kconfig deleted file mode 100644 index 2091dd7..0000000 --- a/arch/arm/cpu/armv7/omap4/Kconfig +++ /dev/null @@ -1,65 +0,0 @@ -if OMAP44XX - -config SPL_EXT_SUPPORT - default y - -config SPL_FAT_SUPPORT - default y - -config SPL_GPIO_SUPPORT - default y - -config SPL_I2C_SUPPORT - default y - -config SPL_LIBCOMMON_SUPPORT - default y - -config SPL_LIBDISK_SUPPORT - default y - -config SPL_LIBGENERIC_SUPPORT - default y - -config SPL_MMC_SUPPORT - default y - -config SPL_NAND_SUPPORT - default y - -config SPL_POWER_SUPPORT - default y - -config SPL_SERIAL_SUPPORT - default y - -config SPL_DISPLAY_PRINT - default y - -choice - prompt "OMAP4 board select" - optional - -config TARGET_DUOVERO - bool "OMAP4430 Gumstix Duovero" - -config TARGET_OMAP4_PANDA - bool "TI OMAP4 PandaBoard" - -config TARGET_OMAP4_SDP4430 - bool "TI OMAP4 SDP4430" - -config TARGET_KC1 - bool "Amazon Kindle Fire (first generation)" - -endchoice - -config SYS_SOC - default "omap4" - -source "board/gumstix/duovero/Kconfig" -source "board/ti/panda/Kconfig" -source "board/ti/sdp4430/Kconfig" -source "board/amazon/kc1/Kconfig" - -endif diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile deleted file mode 100644 index 564f1f6..0000000 --- a/arch/arm/cpu/armv7/omap4/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2000-2010 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += boot.o -obj-y += sdram_elpida.o -obj-y += hwinit.o -obj-y += emif.o -obj-y += prcm-regs.o -obj-y += hw_data.o diff --git a/arch/arm/cpu/armv7/omap4/boot.c b/arch/arm/cpu/armv7/omap4/boot.c deleted file mode 100644 index 7f5791e..0000000 --- a/arch/arm/cpu/armv7/omap4/boot.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * OMAP4 boot - * - * Copyright (C) 2015 Paul Kocialkowski - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -static u32 boot_devices[] = { - BOOT_DEVICE_MMC2, - BOOT_DEVICE_XIP, - BOOT_DEVICE_XIPWAIT, - BOOT_DEVICE_NAND, - BOOT_DEVICE_XIPWAIT, - BOOT_DEVICE_MMC1, - BOOT_DEVICE_ONENAND, - BOOT_DEVICE_ONENAND, - BOOT_DEVICE_MMC2, - BOOT_DEVICE_ONENAND, - BOOT_DEVICE_XIPWAIT, - BOOT_DEVICE_NAND, - BOOT_DEVICE_NAND, - BOOT_DEVICE_MMC1, - BOOT_DEVICE_ONENAND, - BOOT_DEVICE_MMC2, - BOOT_DEVICE_XIP, - BOOT_DEVICE_XIPWAIT, - BOOT_DEVICE_NAND, - BOOT_DEVICE_MMC1, - BOOT_DEVICE_MMC1, - BOOT_DEVICE_ONENAND, - BOOT_DEVICE_MMC2, - BOOT_DEVICE_XIP, - BOOT_DEVICE_MMC2_2, - BOOT_DEVICE_NAND, - BOOT_DEVICE_MMC2_2, - BOOT_DEVICE_MMC1, - BOOT_DEVICE_MMC2_2, - BOOT_DEVICE_MMC2_2, - BOOT_DEVICE_NONE, - BOOT_DEVICE_XIPWAIT, -}; - -u32 omap_sys_boot_device(void) -{ - u32 sys_boot; - - /* Grab the first 5 bits of the status register for SYS_BOOT. */ - sys_boot = readl((u32 *) (*ctrl)->control_status) & ((1 << 5) - 1); - - if (sys_boot >= (sizeof(boot_devices) / sizeof(u32))) - return BOOT_DEVICE_NONE; - - return boot_devices[sys_boot]; -} - -int omap_reboot_mode(char *mode, unsigned int length) -{ - unsigned int limit; - unsigned int i; - - if (length < 2) - return -1; - - if (!warm_reset()) - return -1; - - limit = (length < OMAP_REBOOT_REASON_SIZE) ? length : - OMAP_REBOOT_REASON_SIZE; - - for (i = 0; i < (limit - 1); i++) - mode[i] = readb((u8 *)(OMAP44XX_SAR_RAM_BASE + - OMAP_REBOOT_REASON_OFFSET + i)); - - mode[i] = '\0'; - - return 0; -} - -int omap_reboot_mode_clear(void) -{ - writeb(0, (u8 *)(OMAP44XX_SAR_RAM_BASE + OMAP_REBOOT_REASON_OFFSET)); - - return 0; -} - -int omap_reboot_mode_store(char *mode) -{ - unsigned int i; - - for (i = 0; i < (OMAP_REBOOT_REASON_SIZE - 1) && mode[i] != '\0'; i++) - writeb(mode[i], (u8 *)(OMAP44XX_SAR_RAM_BASE + - OMAP_REBOOT_REASON_OFFSET + i)); - - writeb('\0', (u8 *)(OMAP44XX_SAR_RAM_BASE + - OMAP_REBOOT_REASON_OFFSET + i)); - - return 0; -} diff --git a/arch/arm/cpu/armv7/omap4/config.mk b/arch/arm/cpu/armv7/omap4/config.mk deleted file mode 100644 index ad44d63..0000000 --- a/arch/arm/cpu/armv7/omap4/config.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -# Copyright 2011 Linaro Limited -# -# (C) Copyright 2010 -# Texas Instruments, -# -# Aneesh V -# -# SPDX-License-Identifier: GPL-2.0+ -# -ifdef CONFIG_SPL_BUILD -ALL-y += MLO -else -ALL-y += u-boot.img -endif diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c deleted file mode 100644 index 403c3c6..0000000 --- a/arch/arm/cpu/armv7/omap4/emif.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * EMIF programming - * - * (C) Copyright 2010 - * Texas Instruments, - * - * Aneesh V - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM; -u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN; -#endif - -#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -/* Base AC Timing values specified by JESD209-2 for 400MHz operation */ -static const struct lpddr2_ac_timings timings_jedec_400_mhz = { - .max_freq = 400000000, - .RL = 6, - .tRPab = 21, - .tRCD = 18, - .tWR = 15, - .tRASmin = 42, - .tRRD = 10, - .tWTRx2 = 15, - .tXSR = 140, - .tXPx2 = 15, - .tRFCab = 130, - .tRTPx2 = 15, - .tCKE = 3, - .tCKESR = 15, - .tZQCS = 90, - .tZQCL = 360, - .tZQINIT = 1000, - .tDQSCKMAXx2 = 11, - .tRASmax = 70, - .tFAW = 50 -}; - -/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */ -static const struct lpddr2_ac_timings timings_jedec_200_mhz = { - .max_freq = 200000000, - .RL = 3, - .tRPab = 21, - .tRCD = 18, - .tWR = 15, - .tRASmin = 42, - .tRRD = 10, - .tWTRx2 = 20, - .tXSR = 140, - .tXPx2 = 15, - .tRFCab = 130, - .tRTPx2 = 15, - .tCKE = 3, - .tCKESR = 15, - .tZQCS = 90, - .tZQCL = 360, - .tZQINIT = 1000, - .tDQSCKMAXx2 = 11, - .tRASmax = 70, - .tFAW = 50 -}; - -/* - * Min tCK values specified by JESD209-2 - * Min tCK specifies the minimum duration of some AC timing parameters in terms - * of the number of cycles. If the calculated number of cycles based on the - * absolute time value is less than the min tCK value, min tCK value should - * be used instead. This typically happens at low frequencies. - */ -static const struct lpddr2_min_tck min_tck_jedec = { - .tRL = 3, - .tRP_AB = 3, - .tRCD = 3, - .tWR = 3, - .tRAS_MIN = 3, - .tRRD = 2, - .tWTR = 2, - .tXP = 2, - .tRTP = 2, - .tCKE = 3, - .tCKESR = 3, - .tFAW = 8 -}; - -static const struct lpddr2_ac_timings const* - jedec_ac_timings[MAX_NUM_SPEEDBINS] = { - &timings_jedec_200_mhz, - &timings_jedec_400_mhz -}; - -const struct lpddr2_device_timings jedec_default_timings = { - .ac_timings = jedec_ac_timings, - .min_tck = &min_tck_jedec -}; - -void emif_get_device_timings(u32 emif_nr, - const struct lpddr2_device_timings **cs0_device_timings, - const struct lpddr2_device_timings **cs1_device_timings) -{ - /* Assume Identical devices on EMIF1 & EMIF2 */ - *cs0_device_timings = &jedec_default_timings; - *cs1_device_timings = &jedec_default_timings; -} -#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c deleted file mode 100644 index 02c06c1..0000000 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ /dev/null @@ -1,460 +0,0 @@ -/* - * - * HW data initialization for OMAP4 - * - * (C) Copyright 2013 - * Texas Instruments, - * - * Sricharan R - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include -#include -#include -#include - -struct prcm_regs const **prcm = - (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; -struct dplls const **dplls_data = - (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; -struct vcores_data const **omap_vcores = - (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; -struct omap_sys_ctrl_regs const **ctrl = - (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL; - -/* - * The M & N values in the following tables are created using the - * following tool: - * tools/omap/clocks_get_m_n.c - * Please use this tool for creating the table for any new frequency. - */ - -/* - * dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF - * OMAP4460 OPP_NOM frequency - */ -static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { - {175, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {700, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {401, 10, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {350, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {700, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {638, 34, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* - * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430) - * OMAP4430 OPP_TURBO frequency - * OMAP4470 OPP_NOM frequency - */ -static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { - {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {800, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {619, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {800, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {125, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* - * dpll locked at 1200 MHz - MPU clk at 600 MHz - * OMAP4430 OPP_NOM frequency - */ -static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { - {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {600, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {250, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {300, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {200, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {125, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* OMAP4460 OPP_NOM frequency */ -/* OMAP4470 OPP_NOM (Low Power) frequency */ -static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { - {200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ - {800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ - {619, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ - {800, 26, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ - {125, 5, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* OMAP4430 ES1 OPP_NOM frequency */ -static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = { - {127, 1, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ - {762, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ - {635, 13, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ - {635, 15, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ - {381, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ - {254, 8, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ - {496, 24, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* OMAP4430 ES2.X OPP_NOM frequency */ -static const struct dpll_params - core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = { - {200, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ - {800, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ - {619, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ - {800, 26, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ - {125, 5, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = { - {64, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 12 MHz */ - {768, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 13 MHz */ - {320, 6, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 16.8 MHz */ - {40, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 19.2 MHz */ - {384, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 26 MHz */ - {256, 8, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 27 MHz */ - {20, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = { - {931, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {931, 12, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {665, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {727, 14, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {931, 25, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {931, 26, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {291, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with sys_clk as source */ -static const struct dpll_params - abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { - {49, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {68, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {29, 7, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with 32K clock as source */ -static const struct dpll_params abe_dpll_params_32k_196608khz = { - 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 -}; - -static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { - {80, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {960, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {50, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {320, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {25, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -struct dplls omap4430_dplls_es1 = { - .mpu = mpu_dpll_params_1200mhz, - .core = core_dpll_params_es1_1524mhz, - .per = per_dpll_params_1536mhz, - .iva = iva_dpll_params_1862mhz, -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - .abe = abe_dpll_params_sysclk_196608khz, -#else - .abe = &abe_dpll_params_32k_196608khz, -#endif - .usb = usb_dpll_params_1920mhz, - .ddr = NULL -}; - -struct dplls omap4430_dplls_es20 = { - .mpu = mpu_dpll_params_1200mhz, - .core = core_dpll_params_es2_1600mhz_ddr200mhz, - .per = per_dpll_params_1536mhz, - .iva = iva_dpll_params_1862mhz, -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - .abe = abe_dpll_params_sysclk_196608khz, -#else - .abe = &abe_dpll_params_32k_196608khz, -#endif - .usb = usb_dpll_params_1920mhz, - .ddr = NULL -}; - -struct dplls omap4430_dplls = { - .mpu = mpu_dpll_params_1200mhz, - .core = core_dpll_params_1600mhz, - .per = per_dpll_params_1536mhz, - .iva = iva_dpll_params_1862mhz, -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - .abe = abe_dpll_params_sysclk_196608khz, -#else - .abe = &abe_dpll_params_32k_196608khz, -#endif - .usb = usb_dpll_params_1920mhz, - .ddr = NULL -}; - -struct dplls omap4460_dplls = { - .mpu = mpu_dpll_params_1400mhz, - .core = core_dpll_params_1600mhz, - .per = per_dpll_params_1536mhz, - .iva = iva_dpll_params_1862mhz, -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - .abe = abe_dpll_params_sysclk_196608khz, -#else - .abe = &abe_dpll_params_32k_196608khz, -#endif - .usb = usb_dpll_params_1920mhz, - .ddr = NULL -}; - -struct dplls omap4470_dplls = { - .mpu = mpu_dpll_params_1600mhz, - .core = core_dpll_params_1600mhz, - .per = per_dpll_params_1536mhz, - .iva = iva_dpll_params_1862mhz, -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - .abe = abe_dpll_params_sysclk_196608khz, -#else - .abe = &abe_dpll_params_32k_196608khz, -#endif - .usb = usb_dpll_params_1920mhz, - .ddr = NULL -}; - -struct pmic_data twl6030_4430es1 = { - .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV, - .step = 12660, /* 12.66 mV represented in uV */ - /* The code starts at 1 not 0 */ - .start_code = 1, - .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, - .pmic_bus_init = sri2c_init, - .pmic_write = omap_vc_bypass_send_value, -}; - -/* twl6030 struct is used for TWL6030 and TWL6032 PMIC */ -struct pmic_data twl6030 = { - .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV, - .step = 12660, /* 12.66 mV represented in uV */ - /* The code starts at 1 not 0 */ - .start_code = 1, - .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, - .pmic_bus_init = sri2c_init, - .pmic_write = omap_vc_bypass_send_value, -}; - -struct pmic_data tps62361 = { - .base_offset = TPS62361_BASE_VOLT_MV, - .step = 10000, /* 10 mV represented in uV */ - .start_code = 0, - .gpio = TPS62361_VSEL0_GPIO, - .gpio_en = 1, - .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, - .pmic_bus_init = sri2c_init, - .pmic_write = omap_vc_bypass_send_value, -}; - -struct vcores_data omap4430_volts_es1 = { - .mpu.value = 1325, - .mpu.addr = SMPS_REG_ADDR_VCORE1, - .mpu.pmic = &twl6030_4430es1, - - .core.value = 1200, - .core.addr = SMPS_REG_ADDR_VCORE3, - .core.pmic = &twl6030_4430es1, - - .mm.value = 1200, - .mm.addr = SMPS_REG_ADDR_VCORE2, - .mm.pmic = &twl6030_4430es1, -}; - -struct vcores_data omap4430_volts = { - .mpu.value = 1325, - .mpu.addr = SMPS_REG_ADDR_VCORE1, - .mpu.pmic = &twl6030, - - .core.value = 1200, - .core.addr = SMPS_REG_ADDR_VCORE3, - .core.pmic = &twl6030, - - .mm.value = 1200, - .mm.addr = SMPS_REG_ADDR_VCORE2, - .mm.pmic = &twl6030, -}; - -struct vcores_data omap4460_volts = { - .mpu.value = 1203, - .mpu.addr = TPS62361_REG_ADDR_SET1, - .mpu.pmic = &tps62361, - - .core.value = 1200, - .core.addr = SMPS_REG_ADDR_VCORE1, - .core.pmic = &twl6030, - - .mm.value = 1200, - .mm.addr = SMPS_REG_ADDR_VCORE2, - .mm.pmic = &twl6030, -}; - -/* - * Take closest integer part of the mV value corresponding to a TWL6032 SMPS - * voltage selection code. Aligned with OMAP4470 ES1.0 OCA V.0.7. - */ -struct vcores_data omap4470_volts = { - .mpu.value = 1202, - .mpu.addr = SMPS_REG_ADDR_SMPS1, - .mpu.pmic = &twl6030, - - .core.value = 1126, - .core.addr = SMPS_REG_ADDR_SMPS2, - .core.pmic = &twl6030, - - .mm.value = 1139, - .mm.addr = SMPS_REG_ADDR_SMPS5, - .mm.pmic = &twl6030, -}; - -/* - * Enable essential clock domains, modules and - * do some additional special settings needed - */ -void enable_basic_clocks(void) -{ - u32 const clk_domains_essential[] = { - (*prcm)->cm_l4per_clkstctrl, - (*prcm)->cm_l3init_clkstctrl, - (*prcm)->cm_memif_clkstctrl, - (*prcm)->cm_l4cfg_clkstctrl, - 0 - }; - - u32 const clk_modules_hw_auto_essential[] = { - (*prcm)->cm_l3_gpmc_clkctrl, - (*prcm)->cm_memif_emif_1_clkctrl, - (*prcm)->cm_memif_emif_2_clkctrl, - (*prcm)->cm_l4cfg_l4_cfg_clkctrl, - (*prcm)->cm_wkup_gpio1_clkctrl, - (*prcm)->cm_l4per_gpio2_clkctrl, - (*prcm)->cm_l4per_gpio3_clkctrl, - (*prcm)->cm_l4per_gpio4_clkctrl, - (*prcm)->cm_l4per_gpio5_clkctrl, - (*prcm)->cm_l4per_gpio6_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_essential[] = { - (*prcm)->cm_wkup_gptimer1_clkctrl, - (*prcm)->cm_l3init_hsmmc1_clkctrl, - (*prcm)->cm_l3init_hsmmc2_clkctrl, - (*prcm)->cm_l4per_gptimer2_clkctrl, - (*prcm)->cm_wkup_wdtimer2_clkctrl, - (*prcm)->cm_l4per_uart3_clkctrl, - (*prcm)->cm_l4per_i2c1_clkctrl, - (*prcm)->cm_l4per_i2c2_clkctrl, - (*prcm)->cm_l4per_i2c3_clkctrl, - (*prcm)->cm_l4per_i2c4_clkctrl, - 0 - }; - - /* Enable optional additional functional clock for GPIO4 */ - setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, - GPIO4_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable 96 MHz clock for MMC1 & MMC2 */ - setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - - /* Select 32KHz clock as the source of GPTIMER1 */ - setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, - GPTIMER1_CLKCTRL_CLKSEL_MASK); - - /* Enable optional 48M functional clock for USB PHY */ - setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl, - USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); - - /* Enable 32 KHz clock for USB PHY */ - setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl, - USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -void enable_basic_uboot_clocks(void) -{ - u32 const clk_domains_essential[] = { - 0 - }; - - u32 const clk_modules_hw_auto_essential[] = { - (*prcm)->cm_l3init_hsusbotg_clkctrl, - (*prcm)->cm_l3init_usbphy_clkctrl, - (*prcm)->cm_clksel_usb_60mhz, - (*prcm)->cm_l3init_hsusbtll_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_essential[] = { - (*prcm)->cm_l4per_mcspi1_clkctrl, - (*prcm)->cm_l3init_hsusbhost_clkctrl, - 0 - }; - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -void hw_data_init(void) -{ - u32 omap_rev = omap_revision(); - - (*prcm) = &omap4_prcm; - - switch (omap_rev) { - - case OMAP4430_ES1_0: - *dplls_data = &omap4430_dplls_es1; - *omap_vcores = &omap4430_volts_es1; - break; - - case OMAP4430_ES2_0: - *dplls_data = &omap4430_dplls_es20; - *omap_vcores = &omap4430_volts; - break; - - case OMAP4430_ES2_1: - case OMAP4430_ES2_2: - case OMAP4430_ES2_3: - *dplls_data = &omap4430_dplls; - *omap_vcores = &omap4430_volts; - break; - - case OMAP4460_ES1_0: - case OMAP4460_ES1_1: - *dplls_data = &omap4460_dplls; - *omap_vcores = &omap4460_volts; - break; - - case OMAP4470_ES1_0: - *dplls_data = &omap4470_dplls; - *omap_vcores = &omap4470_volts; - break; - - default: - printf("\n INVALID OMAP REVISION "); - } - - *ctrl = &omap4_ctrl; -} diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c deleted file mode 100644 index 7c6638c..0000000 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * - * Common functions for OMAP4 based boards - * - * (C) Copyright 2010 - * Texas Instruments, - * - * Author : - * Aneesh V - * Steve Sakoman - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV; - -static const struct gpio_bank gpio_bank_44xx[6] = { - { (void *)OMAP44XX_GPIO1_BASE }, - { (void *)OMAP44XX_GPIO2_BASE }, - { (void *)OMAP44XX_GPIO3_BASE }, - { (void *)OMAP44XX_GPIO4_BASE }, - { (void *)OMAP44XX_GPIO5_BASE }, - { (void *)OMAP44XX_GPIO6_BASE }, -}; - -const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; - -#ifdef CONFIG_SPL_BUILD -/* - * Some tuning of IOs for optimal power and performance - */ -void do_io_settings(void) -{ - u32 lpddr2io; - - u32 omap4_rev = omap_revision(); - - if (omap4_rev == OMAP4430_ES1_0) - lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN; - else if (omap4_rev == OMAP4430_ES2_0) - lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER; - else - lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN; - - /* EMIF1 */ - writel(lpddr2io, (*ctrl)->control_lpddr2io1_0); - writel(lpddr2io, (*ctrl)->control_lpddr2io1_1); - /* No pull for GR10 as per hw team's recommendation */ - writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - (*ctrl)->control_lpddr2io1_2); - writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3); - - /* EMIF2 */ - writel(lpddr2io, (*ctrl)->control_lpddr2io2_0); - writel(lpddr2io, (*ctrl)->control_lpddr2io2_1); - /* No pull for GR10 as per hw team's recommendation */ - writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - (*ctrl)->control_lpddr2io2_2); - writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3); - - /* - * Some of these settings (TRIM values) come from eFuse and are - * in turn programmed in the eFuse at manufacturing time after - * calibration of the device. Do the software over-ride only if - * the device is not correctly trimmed - */ - if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) { - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - (*ctrl)->control_ldosram_iva_voltage_ctrl); - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - (*ctrl)->control_ldosram_mpu_voltage_ctrl); - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - (*ctrl)->control_ldosram_core_voltage_ctrl); - } - - /* - * Over-ride the register - * i. unconditionally for all 4430 - * ii. only if un-trimmed for 4460 - */ - if (!readl((*ctrl)->control_efuse_1)) - writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1); - - if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2)) - writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2); -} -#endif /* CONFIG_SPL_BUILD */ - -/* dummy fuction for omap4 */ -void config_data_eye_leveling_samples(u32 emif_base) -{ -} - -void init_omap_revision(void) -{ - /* - * For some of the ES2/ES1 boards ID_CODE is not reliable: - * Also, ES1 and ES2 have different ARM revisions - * So use ARM revision for identification - */ - unsigned int arm_rev = cortex_rev(); - - switch (arm_rev) { - case MIDR_CORTEX_A9_R0P1: - *omap_si_rev = OMAP4430_ES1_0; - break; - case MIDR_CORTEX_A9_R1P2: - switch (readl(CONTROL_ID_CODE)) { - case OMAP4_CONTROL_ID_CODE_ES2_0: - *omap_si_rev = OMAP4430_ES2_0; - break; - case OMAP4_CONTROL_ID_CODE_ES2_1: - *omap_si_rev = OMAP4430_ES2_1; - break; - case OMAP4_CONTROL_ID_CODE_ES2_2: - *omap_si_rev = OMAP4430_ES2_2; - break; - default: - *omap_si_rev = OMAP4430_ES2_0; - break; - } - break; - case MIDR_CORTEX_A9_R1P3: - *omap_si_rev = OMAP4430_ES2_3; - break; - case MIDR_CORTEX_A9_R2P10: - switch (readl(CONTROL_ID_CODE)) { - case OMAP4470_CONTROL_ID_CODE_ES1_0: - *omap_si_rev = OMAP4470_ES1_0; - break; - case OMAP4460_CONTROL_ID_CODE_ES1_1: - *omap_si_rev = OMAP4460_ES1_1; - break; - case OMAP4460_CONTROL_ID_CODE_ES1_0: - default: - *omap_si_rev = OMAP4460_ES1_0; - break; - } - break; - default: - *omap_si_rev = OMAP4430_SILICON_ID_INVALID; - break; - } -} - -void omap_die_id(unsigned int *die_id) -{ - die_id[0] = readl((*ctrl)->control_std_fuse_die_id_0); - die_id[1] = readl((*ctrl)->control_std_fuse_die_id_1); - die_id[2] = readl((*ctrl)->control_std_fuse_die_id_2); - die_id[3] = readl((*ctrl)->control_std_fuse_die_id_3); -} - -#ifndef CONFIG_SYS_L2CACHE_OFF -void v7_outer_cache_enable(void) -{ - omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 1); -} - -void v7_outer_cache_disable(void) -{ - omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 0); -} -#endif /* !CONFIG_SYS_L2CACHE_OFF */ diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c deleted file mode 100644 index 2f0e1e8..0000000 --- a/arch/arm/cpu/armv7/omap4/prcm-regs.c +++ /dev/null @@ -1,307 +0,0 @@ -/* - * - * HW regs data for OMAP4 - * - * (C) Copyright 2013 - * Texas Instruments, - * - * Sricharan R - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -struct prcm_regs const omap4_prcm = { - /* cm1.ckgen */ - .cm_clksel_core = 0x4a004100, - .cm_clksel_abe = 0x4a004108, - .cm_dll_ctrl = 0x4a004110, - .cm_clkmode_dpll_core = 0x4a004120, - .cm_idlest_dpll_core = 0x4a004124, - .cm_autoidle_dpll_core = 0x4a004128, - .cm_clksel_dpll_core = 0x4a00412c, - .cm_div_m2_dpll_core = 0x4a004130, - .cm_div_m3_dpll_core = 0x4a004134, - .cm_div_m4_dpll_core = 0x4a004138, - .cm_div_m5_dpll_core = 0x4a00413c, - .cm_div_m6_dpll_core = 0x4a004140, - .cm_div_m7_dpll_core = 0x4a004144, - .cm_ssc_deltamstep_dpll_core = 0x4a004148, - .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, - .cm_emu_override_dpll_core = 0x4a004150, - .cm_clkmode_dpll_mpu = 0x4a004160, - .cm_idlest_dpll_mpu = 0x4a004164, - .cm_autoidle_dpll_mpu = 0x4a004168, - .cm_clksel_dpll_mpu = 0x4a00416c, - .cm_div_m2_dpll_mpu = 0x4a004170, - .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, - .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, - .cm_bypclk_dpll_mpu = 0x4a00419c, - .cm_clkmode_dpll_iva = 0x4a0041a0, - .cm_idlest_dpll_iva = 0x4a0041a4, - .cm_autoidle_dpll_iva = 0x4a0041a8, - .cm_clksel_dpll_iva = 0x4a0041ac, - .cm_div_m4_dpll_iva = 0x4a0041b8, - .cm_div_m5_dpll_iva = 0x4a0041bc, - .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, - .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, - .cm_bypclk_dpll_iva = 0x4a0041dc, - .cm_clkmode_dpll_abe = 0x4a0041e0, - .cm_idlest_dpll_abe = 0x4a0041e4, - .cm_autoidle_dpll_abe = 0x4a0041e8, - .cm_clksel_dpll_abe = 0x4a0041ec, - .cm_div_m2_dpll_abe = 0x4a0041f0, - .cm_div_m3_dpll_abe = 0x4a0041f4, - .cm_ssc_deltamstep_dpll_abe = 0x4a004208, - .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, - .cm_clkmode_dpll_ddrphy = 0x4a004220, - .cm_idlest_dpll_ddrphy = 0x4a004224, - .cm_autoidle_dpll_ddrphy = 0x4a004228, - .cm_clksel_dpll_ddrphy = 0x4a00422c, - .cm_div_m2_dpll_ddrphy = 0x4a004230, - .cm_div_m4_dpll_ddrphy = 0x4a004238, - .cm_div_m5_dpll_ddrphy = 0x4a00423c, - .cm_div_m6_dpll_ddrphy = 0x4a004240, - .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, - .cm_shadow_freq_config1 = 0x4a004260, - .cm_mpu_mpu_clkctrl = 0x4a004320, - - /* cm1.dsp */ - .cm_dsp_clkstctrl = 0x4a004400, - .cm_dsp_dsp_clkctrl = 0x4a004420, - - /* cm1.abe */ - .cm1_abe_clkstctrl = 0x4a004500, - .cm1_abe_l4abe_clkctrl = 0x4a004520, - .cm1_abe_aess_clkctrl = 0x4a004528, - .cm1_abe_pdm_clkctrl = 0x4a004530, - .cm1_abe_dmic_clkctrl = 0x4a004538, - .cm1_abe_mcasp_clkctrl = 0x4a004540, - .cm1_abe_mcbsp1_clkctrl = 0x4a004548, - .cm1_abe_mcbsp2_clkctrl = 0x4a004550, - .cm1_abe_mcbsp3_clkctrl = 0x4a004558, - .cm1_abe_slimbus_clkctrl = 0x4a004560, - .cm1_abe_timer5_clkctrl = 0x4a004568, - .cm1_abe_timer6_clkctrl = 0x4a004570, - .cm1_abe_timer7_clkctrl = 0x4a004578, - .cm1_abe_timer8_clkctrl = 0x4a004580, - .cm1_abe_wdt3_clkctrl = 0x4a004588, - - /* cm2.ckgen */ - .cm_clksel_mpu_m3_iss_root = 0x4a008100, - .cm_clksel_usb_60mhz = 0x4a008104, - .cm_scale_fclk = 0x4a008108, - .cm_core_dvfs_perf1 = 0x4a008110, - .cm_core_dvfs_perf2 = 0x4a008114, - .cm_core_dvfs_perf3 = 0x4a008118, - .cm_core_dvfs_perf4 = 0x4a00811c, - .cm_core_dvfs_current = 0x4a008124, - .cm_iva_dvfs_perf_tesla = 0x4a008128, - .cm_iva_dvfs_perf_ivahd = 0x4a00812c, - .cm_iva_dvfs_perf_abe = 0x4a008130, - .cm_iva_dvfs_current = 0x4a008138, - .cm_clkmode_dpll_per = 0x4a008140, - .cm_idlest_dpll_per = 0x4a008144, - .cm_autoidle_dpll_per = 0x4a008148, - .cm_clksel_dpll_per = 0x4a00814c, - .cm_div_m2_dpll_per = 0x4a008150, - .cm_div_m3_dpll_per = 0x4a008154, - .cm_div_m4_dpll_per = 0x4a008158, - .cm_div_m5_dpll_per = 0x4a00815c, - .cm_div_m6_dpll_per = 0x4a008160, - .cm_div_m7_dpll_per = 0x4a008164, - .cm_ssc_deltamstep_dpll_per = 0x4a008168, - .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, - .cm_emu_override_dpll_per = 0x4a008170, - .cm_clkmode_dpll_usb = 0x4a008180, - .cm_idlest_dpll_usb = 0x4a008184, - .cm_autoidle_dpll_usb = 0x4a008188, - .cm_clksel_dpll_usb = 0x4a00818c, - .cm_div_m2_dpll_usb = 0x4a008190, - .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, - .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, - .cm_clkdcoldo_dpll_usb = 0x4a0081b4, - .cm_clkmode_dpll_unipro = 0x4a0081c0, - .cm_idlest_dpll_unipro = 0x4a0081c4, - .cm_autoidle_dpll_unipro = 0x4a0081c8, - .cm_clksel_dpll_unipro = 0x4a0081cc, - .cm_div_m2_dpll_unipro = 0x4a0081d0, - .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, - .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, - .cm_coreaon_usb_phy1_core_clkctrl = 0x4a008640, - - /* cm2.core */ - .cm_l3_1_clkstctrl = 0x4a008700, - .cm_l3_1_dynamicdep = 0x4a008708, - .cm_l3_1_l3_1_clkctrl = 0x4a008720, - .cm_l3_2_clkstctrl = 0x4a008800, - .cm_l3_2_dynamicdep = 0x4a008808, - .cm_l3_2_l3_2_clkctrl = 0x4a008820, - .cm_l3_gpmc_clkctrl = 0x4a008828, - .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, - .cm_mpu_m3_clkstctrl = 0x4a008900, - .cm_mpu_m3_staticdep = 0x4a008904, - .cm_mpu_m3_dynamicdep = 0x4a008908, - .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, - .cm_sdma_clkstctrl = 0x4a008a00, - .cm_sdma_staticdep = 0x4a008a04, - .cm_sdma_dynamicdep = 0x4a008a08, - .cm_sdma_sdma_clkctrl = 0x4a008a20, - .cm_memif_clkstctrl = 0x4a008b00, - .cm_memif_dmm_clkctrl = 0x4a008b20, - .cm_memif_emif_fw_clkctrl = 0x4a008b28, - .cm_memif_emif_1_clkctrl = 0x4a008b30, - .cm_memif_emif_2_clkctrl = 0x4a008b38, - .cm_memif_dll_clkctrl = 0x4a008b40, - .cm_memif_emif_h1_clkctrl = 0x4a008b50, - .cm_memif_emif_h2_clkctrl = 0x4a008b58, - .cm_memif_dll_h_clkctrl = 0x4a008b60, - .cm_c2c_clkstctrl = 0x4a008c00, - .cm_c2c_staticdep = 0x4a008c04, - .cm_c2c_dynamicdep = 0x4a008c08, - .cm_c2c_sad2d_clkctrl = 0x4a008c20, - .cm_c2c_modem_icr_clkctrl = 0x4a008c28, - .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, - .cm_l4cfg_clkstctrl = 0x4a008d00, - .cm_l4cfg_dynamicdep = 0x4a008d08, - .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, - .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, - .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, - .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, - .cm_l3instr_clkstctrl = 0x4a008e00, - .cm_l3instr_l3_3_clkctrl = 0x4a008e20, - .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, - .cm_l3instr_intrconn_wp1_clkct = 0x4a008e40, - .cm_ivahd_clkstctrl = 0x4a008f00, - - /* cm2.ivahd */ - .cm_ivahd_ivahd_clkctrl = 0x4a008f20, - .cm_ivahd_sl2_clkctrl = 0x4a008f28, - - /* cm2.cam */ - .cm_cam_clkstctrl = 0x4a009000, - .cm_cam_iss_clkctrl = 0x4a009020, - .cm_cam_fdif_clkctrl = 0x4a009028, - - /* cm2.dss */ - .cm_dss_clkstctrl = 0x4a009100, - .cm_dss_dss_clkctrl = 0x4a009120, - - /* cm2.sgx */ - .cm_sgx_clkstctrl = 0x4a009200, - .cm_sgx_sgx_clkctrl = 0x4a009220, - - /* cm2.l3init */ - .cm_l3init_clkstctrl = 0x4a009300, - .cm_l3init_hsmmc1_clkctrl = 0x4a009328, - .cm_l3init_hsmmc2_clkctrl = 0x4a009330, - .cm_l3init_hsi_clkctrl = 0x4a009338, - .cm_l3init_hsusbhost_clkctrl = 0x4a009358, - .cm_l3init_hsusbotg_clkctrl = 0x4a009360, - .cm_l3init_hsusbtll_clkctrl = 0x4a009368, - .cm_l3init_p1500_clkctrl = 0x4a009378, - .cm_l3init_fsusb_clkctrl = 0x4a0093d0, - .cm_l3init_usbphy_clkctrl = 0x4a0093e0, - - /* cm2.l4per */ - .cm_l4per_clkstctrl = 0x4a009400, - .cm_l4per_dynamicdep = 0x4a009408, - .cm_l4per_adc_clkctrl = 0x4a009420, - .cm_l4per_gptimer10_clkctrl = 0x4a009428, - .cm_l4per_gptimer11_clkctrl = 0x4a009430, - .cm_l4per_gptimer2_clkctrl = 0x4a009438, - .cm_l4per_gptimer3_clkctrl = 0x4a009440, - .cm_l4per_gptimer4_clkctrl = 0x4a009448, - .cm_l4per_gptimer9_clkctrl = 0x4a009450, - .cm_l4per_elm_clkctrl = 0x4a009458, - .cm_l4per_gpio2_clkctrl = 0x4a009460, - .cm_l4per_gpio3_clkctrl = 0x4a009468, - .cm_l4per_gpio4_clkctrl = 0x4a009470, - .cm_l4per_gpio5_clkctrl = 0x4a009478, - .cm_l4per_gpio6_clkctrl = 0x4a009480, - .cm_l4per_hdq1w_clkctrl = 0x4a009488, - .cm_l4per_hecc1_clkctrl = 0x4a009490, - .cm_l4per_hecc2_clkctrl = 0x4a009498, - .cm_l4per_i2c1_clkctrl = 0x4a0094a0, - .cm_l4per_i2c2_clkctrl = 0x4a0094a8, - .cm_l4per_i2c3_clkctrl = 0x4a0094b0, - .cm_l4per_i2c4_clkctrl = 0x4a0094b8, - .cm_l4per_l4per_clkctrl = 0x4a0094c0, - .cm_l4per_mcasp2_clkctrl = 0x4a0094d0, - .cm_l4per_mcasp3_clkctrl = 0x4a0094d8, - .cm_l4per_mcbsp4_clkctrl = 0x4a0094e0, - .cm_l4per_mgate_clkctrl = 0x4a0094e8, - .cm_l4per_mcspi1_clkctrl = 0x4a0094f0, - .cm_l4per_mcspi2_clkctrl = 0x4a0094f8, - .cm_l4per_mcspi3_clkctrl = 0x4a009500, - .cm_l4per_mcspi4_clkctrl = 0x4a009508, - .cm_l4per_mmcsd3_clkctrl = 0x4a009520, - .cm_l4per_mmcsd4_clkctrl = 0x4a009528, - .cm_l4per_msprohg_clkctrl = 0x4a009530, - .cm_l4per_slimbus2_clkctrl = 0x4a009538, - .cm_l4per_uart1_clkctrl = 0x4a009540, - .cm_l4per_uart2_clkctrl = 0x4a009548, - .cm_l4per_uart3_clkctrl = 0x4a009550, - .cm_l4per_uart4_clkctrl = 0x4a009558, - .cm_l4per_mmcsd5_clkctrl = 0x4a009560, - .cm_l4per_i2c5_clkctrl = 0x4a009568, - .cm_l4sec_clkstctrl = 0x4a009580, - .cm_l4sec_staticdep = 0x4a009584, - .cm_l4sec_dynamicdep = 0x4a009588, - .cm_l4sec_aes1_clkctrl = 0x4a0095a0, - .cm_l4sec_aes2_clkctrl = 0x4a0095a8, - .cm_l4sec_des3des_clkctrl = 0x4a0095b0, - .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8, - .cm_l4sec_rng_clkctrl = 0x4a0095c0, - .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8, - .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8, - - /* l4 wkup regs */ - .cm_abe_pll_ref_clksel = 0x4a30610c, - .cm_sys_clksel = 0x4a306110, - .cm_wkup_clkstctrl = 0x4a307800, - .cm_wkup_l4wkup_clkctrl = 0x4a307820, - .cm_wkup_wdtimer1_clkctrl = 0x4a307828, - .cm_wkup_wdtimer2_clkctrl = 0x4a307830, - .cm_wkup_gpio1_clkctrl = 0x4a307838, - .cm_wkup_gptimer1_clkctrl = 0x4a307840, - .cm_wkup_gptimer12_clkctrl = 0x4a307848, - .cm_wkup_synctimer_clkctrl = 0x4a307850, - .cm_wkup_usim_clkctrl = 0x4a307858, - .cm_wkup_sarram_clkctrl = 0x4a307860, - .cm_wkup_keyboard_clkctrl = 0x4a307878, - .cm_wkup_rtc_clkctrl = 0x4a307880, - .cm_wkup_bandgap_clkctrl = 0x4a307888, - .prm_vc_val_bypass = 0x4a307ba0, - .prm_vc_cfg_channel = 0x4a307ba4, - .prm_vc_cfg_i2c_mode = 0x4a307ba8, - .prm_vc_cfg_i2c_clk = 0x4a307bac, -}; - -struct omap_sys_ctrl_regs const omap4_ctrl = { - .control_status = 0x4A0022C4, - .control_std_fuse_die_id_0 = 0x4A002200, - .control_std_fuse_die_id_1 = 0x4A002208, - .control_std_fuse_die_id_2 = 0x4A00220C, - .control_std_fuse_die_id_3 = 0x4A002210, - .control_std_fuse_opp_bgap = 0x4a002260, - .control_status = 0x4a0022c4, - .control_ldosram_iva_voltage_ctrl = 0x4A002320, - .control_ldosram_mpu_voltage_ctrl = 0x4A002324, - .control_ldosram_core_voltage_ctrl = 0x4A002328, - .control_usbotghs_ctrl = 0x4A00233C, - .control_padconf_core_base = 0x4A100000, - .control_pbiaslite = 0x4A100600, - .control_lpddr2io1_0 = 0x4A100638, - .control_lpddr2io1_1 = 0x4A10063C, - .control_lpddr2io1_2 = 0x4A100640, - .control_lpddr2io1_3 = 0x4A100644, - .control_lpddr2io2_0 = 0x4A100648, - .control_lpddr2io2_1 = 0x4A10064C, - .control_lpddr2io2_2 = 0x4A100650, - .control_lpddr2io2_3 = 0x4A100654, - .control_efuse_1 = 0x4A100700, - .control_efuse_2 = 0x4A100704, - .control_padconf_wkup_base = 0x4A31E000, -}; diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c deleted file mode 100644 index 78b4f09..0000000 --- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * Timing and Organization details of the Elpida parts used in OMAP4 - * SDPs and Panda - * - * (C) Copyright 2010 - * Texas Instruments, - * - * Aneesh V - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -/* - * This file provides details of the LPDDR2 SDRAM parts used on OMAP4430 - * SDP and Panda. Since the parts used and geometry are identical for - * SDP and Panda for a given OMAP4 revision, this information is kept - * here instead of being in board directory. However the key functions - * exported are weakly linked so that they can be over-ridden in the board - * directory if there is a OMAP4 board in the future that uses a different - * memory device or geometry. - * - * For any new board with different memory devices over-ride one or more - * of the following functions as per the CONFIG flags you intend to enable: - * - emif_get_reg_dump() - * - emif_get_dmm_regs() - * - emif_get_device_details() - * - emif_get_device_timings() - */ - -#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - -const struct emif_regs emif_regs_elpida_200_mhz_2cs = { - .sdram_config_init = 0x80000eb9, - .sdram_config = 0x80001ab9, - .ref_ctrl = 0x0000030c, - .sdram_tim1 = 0x08648311, - .sdram_tim2 = 0x101b06ca, - .sdram_tim3 = 0x0048a19f, - .read_idle_ctrl = 0x000501ff, - .zq_config = 0x500b3214, - .temp_alert_config = 0xd8016893, - .emif_ddr_phy_ctlr_1_init = 0x049ffff5, - .emif_ddr_phy_ctlr_1 = 0x049ff808 -}; - -const struct emif_regs emif_regs_elpida_380_mhz_1cs = { - .sdram_config_init = 0x80000eb1, - .sdram_config = 0x80001ab1, - .ref_ctrl = 0x000005cd, - .sdram_tim1 = 0x10cb0622, - .sdram_tim2 = 0x20350d52, - .sdram_tim3 = 0x00b1431f, - .read_idle_ctrl = 0x000501ff, - .zq_config = 0x500b3214, - .temp_alert_config = 0x58016893, - .emif_ddr_phy_ctlr_1_init = 0x049ffff5, - .emif_ddr_phy_ctlr_1 = 0x049ff418 -}; - -const struct emif_regs emif_regs_elpida_400_mhz_1cs = { - .sdram_config_init = 0x80800eb2, - .sdram_config = 0x80801ab2, - .ref_ctrl = 0x00000618, - .sdram_tim1 = 0x10eb0662, - .sdram_tim2 = 0x20370dd2, - .sdram_tim3 = 0x00b1c33f, - .read_idle_ctrl = 0x000501ff, - .zq_config = 0x500b3215, - .temp_alert_config = 0x58016893, - .emif_ddr_phy_ctlr_1_init = 0x049ffff5, - .emif_ddr_phy_ctlr_1 = 0x049ff418 -}; - -const struct emif_regs emif_regs_elpida_400_mhz_2cs = { - .sdram_config_init = 0x80000eb9, - .sdram_config = 0x80001ab9, - .ref_ctrl = 0x00000618, - .sdram_tim1 = 0x10eb0662, - .sdram_tim2 = 0x20370dd2, - .sdram_tim3 = 0x00b1c33f, - .read_idle_ctrl = 0x000501ff, - .zq_config = 0xd00b3214, - .temp_alert_config = 0xd8016893, - .emif_ddr_phy_ctlr_1_init = 0x049ffff5, - .emif_ddr_phy_ctlr_1 = 0x049ff418 -}; - -const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = { - .dmm_lisa_map_0 = 0xFF020100, - .dmm_lisa_map_1 = 0, - .dmm_lisa_map_2 = 0, - .dmm_lisa_map_3 = 0x80540300, - .is_ma_present = 0x0 -}; - -const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = { - .dmm_lisa_map_0 = 0xFF020100, - .dmm_lisa_map_1 = 0, - .dmm_lisa_map_2 = 0, - .dmm_lisa_map_3 = 0x80640300, - .is_ma_present = 0x0 -}; - -const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2 = { - .dmm_lisa_map_0 = 0xFF020100, - .dmm_lisa_map_1 = 0, - .dmm_lisa_map_2 = 0, - .dmm_lisa_map_3 = 0x80640300, - .is_ma_present = 0x1 -}; - -static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) -{ - u32 omap4_rev = omap_revision(); - - /* Same devices and geometry on both EMIFs */ - if (omap4_rev == OMAP4430_ES1_0) - *regs = &emif_regs_elpida_380_mhz_1cs; - else if (omap4_rev == OMAP4430_ES2_0) - *regs = &emif_regs_elpida_200_mhz_2cs; - else if (omap4_rev < OMAP4470_ES1_0) - *regs = &emif_regs_elpida_400_mhz_2cs; - else - *regs = &emif_regs_elpida_400_mhz_1cs; -} -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) - __attribute__((weak, alias("emif_get_reg_dump_sdp"))); - -static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs - **dmm_lisa_regs) -{ - u32 omap_rev = omap_revision(); - - if (omap_rev == OMAP4430_ES1_0) - *dmm_lisa_regs = &lisa_map_2G_x_1_x_2; - else if (omap_rev < OMAP4460_ES1_0) - *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; - else - *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2; -} - -void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) - __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); - -#else - -const struct lpddr2_device_details elpida_2G_S4_details = { - .type = LPDDR2_TYPE_S4, - .density = LPDDR2_DENSITY_2Gb, - .io_width = LPDDR2_IO_WIDTH_32, - .manufacturer = LPDDR2_MANUFACTURER_ELPIDA -}; - -const struct lpddr2_device_details elpida_4G_S4_details = { - .type = LPDDR2_TYPE_S4, - .density = LPDDR2_DENSITY_4Gb, - .io_width = LPDDR2_IO_WIDTH_32, - .manufacturer = LPDDR2_MANUFACTURER_ELPIDA -}; - -struct lpddr2_device_details *emif_get_device_details_sdp(u32 emif_nr, u8 cs, - struct lpddr2_device_details *lpddr2_dev_details) -{ - u32 omap_rev = omap_revision(); - - /* EMIF1 & EMIF2 have identical configuration */ - if (((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0)) - && (cs == CS1)) { - /* Nothing connected on CS1 for 4430/4470 ES1.0 */ - return NULL; - } else if (omap_rev < OMAP4470_ES1_0) { - /* In all other 4430/4460 cases Elpida 2G device */ - *lpddr2_dev_details = elpida_2G_S4_details; - } else { - /* 4470: 4G device */ - *lpddr2_dev_details = elpida_4G_S4_details; - } - return lpddr2_dev_details; -} - -struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, - struct lpddr2_device_details *lpddr2_dev_details) - __attribute__((weak, alias("emif_get_device_details_sdp"))); - -#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ - -#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -static const struct lpddr2_ac_timings timings_elpida_400_mhz = { - .max_freq = 400000000, - .RL = 6, - .tRPab = 21, - .tRCD = 18, - .tWR = 15, - .tRASmin = 42, - .tRRD = 10, - .tWTRx2 = 15, - .tXSR = 140, - .tXPx2 = 15, - .tRFCab = 130, - .tRTPx2 = 15, - .tCKE = 3, - .tCKESR = 15, - .tZQCS = 90, - .tZQCL = 360, - .tZQINIT = 1000, - .tDQSCKMAXx2 = 11, - .tRASmax = 70, - .tFAW = 50 -}; - -static const struct lpddr2_ac_timings timings_elpida_333_mhz = { - .max_freq = 333000000, - .RL = 5, - .tRPab = 21, - .tRCD = 18, - .tWR = 15, - .tRASmin = 42, - .tRRD = 10, - .tWTRx2 = 15, - .tXSR = 140, - .tXPx2 = 15, - .tRFCab = 130, - .tRTPx2 = 15, - .tCKE = 3, - .tCKESR = 15, - .tZQCS = 90, - .tZQCL = 360, - .tZQINIT = 1000, - .tDQSCKMAXx2 = 11, - .tRASmax = 70, - .tFAW = 50 -}; - -static const struct lpddr2_ac_timings timings_elpida_200_mhz = { - .max_freq = 200000000, - .RL = 3, - .tRPab = 21, - .tRCD = 18, - .tWR = 15, - .tRASmin = 42, - .tRRD = 10, - .tWTRx2 = 20, - .tXSR = 140, - .tXPx2 = 15, - .tRFCab = 130, - .tRTPx2 = 15, - .tCKE = 3, - .tCKESR = 15, - .tZQCS = 90, - .tZQCL = 360, - .tZQINIT = 1000, - .tDQSCKMAXx2 = 11, - .tRASmax = 70, - .tFAW = 50 -}; - -static const struct lpddr2_min_tck min_tck_elpida = { - .tRL = 3, - .tRP_AB = 3, - .tRCD = 3, - .tWR = 3, - .tRAS_MIN = 3, - .tRRD = 2, - .tWTR = 2, - .tXP = 2, - .tRTP = 2, - .tCKE = 3, - .tCKESR = 3, - .tFAW = 8 -}; - -static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = { - &timings_elpida_200_mhz, - &timings_elpida_333_mhz, - &timings_elpida_400_mhz -}; - -const struct lpddr2_device_timings elpida_2G_S4_timings = { - .ac_timings = elpida_ac_timings, - .min_tck = &min_tck_elpida, -}; - -void emif_get_device_timings_sdp(u32 emif_nr, - const struct lpddr2_device_timings **cs0_device_timings, - const struct lpddr2_device_timings **cs1_device_timings) -{ - u32 omap_rev = omap_revision(); - - /* Identical devices on EMIF1 & EMIF2 */ - *cs0_device_timings = &elpida_2G_S4_timings; - - if ((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0)) - *cs1_device_timings = NULL; - else - *cs1_device_timings = &elpida_2G_S4_timings; -} - -void emif_get_device_timings(u32 emif_nr, - const struct lpddr2_device_timings **cs0_device_timings, - const struct lpddr2_device_timings **cs1_device_timings) - __attribute__((weak, alias("emif_get_device_timings_sdp"))); - -#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ - -const struct lpddr2_mr_regs mr_regs = { - .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3, - .mr2 = 0x4, - .mr3 = -1, - .mr10 = MR10_ZQ_ZQINIT, - .mr16 = MR16_REF_FULL_ARRAY -}; - -void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) -{ - *regs = &mr_regs; -} - -__weak const struct read_write_regs *get_bug_regs(u32 *iterations) -{ - return 0; -} diff --git a/arch/arm/cpu/armv7/omap5/Kconfig b/arch/arm/cpu/armv7/omap5/Kconfig deleted file mode 100644 index 22259dc..0000000 --- a/arch/arm/cpu/armv7/omap5/Kconfig +++ /dev/null @@ -1,94 +0,0 @@ -if OMAP54XX - -config SPL_EXT_SUPPORT - default y - -config SPL_FAT_SUPPORT - default y - -config SPL_GPIO_SUPPORT - default y - -config SPL_I2C_SUPPORT - default y - -config SPL_LIBCOMMON_SUPPORT - default y - -config SPL_LIBDISK_SUPPORT - default y - -config SPL_LIBGENERIC_SUPPORT - default y - -config SPL_MMC_SUPPORT - default y - -config SPL_NAND_SUPPORT - default y - -config SPL_POWER_SUPPORT - default y - -config SPL_SERIAL_SUPPORT - default y - -config SPL_DISPLAY_PRINT - default y - -choice - prompt "OMAP5 board select" - optional - -config TARGET_CM_T54 - bool "CompuLab CM-T54" - -config TARGET_OMAP5_UEVM - bool "TI OMAP5 uEVM board" - -config TARGET_DRA7XX_EVM - bool "TI DRA7XX" - select TI_I2C_BOARD_DETECT - select PHYS_64BIT - -config TARGET_AM57XX_EVM - bool "AM57XX" - select TI_I2C_BOARD_DETECT - -endchoice - -config SYS_SOC - default "omap5" - -config TI_SECURE_EMIF_REGION_START - hex "Reserved EMIF region start address" - depends on TI_SECURE_DEVICE - default 0x0 - help - Reserved EMIF region start address. Set to "0" to auto-select - to be at the end of the external memory region. - -config TI_SECURE_EMIF_TOTAL_REGION_SIZE - hex "Reserved EMIF region size" - depends on TI_SECURE_DEVICE - default 0x0 - help - Total reserved EMIF region size. Default is 0, which means no reserved EMIF - region on secure devices. - -config TI_SECURE_EMIF_PROTECTED_REGION_SIZE - hex "Size of protected region within reserved EMIF region" - depends on TI_SECURE_DEVICE - default 0x0 - help - This config option is used to specify the size of the portion of the total - reserved EMIF region set aside for secure OS needs that will be protected - using hardware memory firewalls. This value must be smaller than the - TI_SECURE_EMIF_TOTAL_REGION_SIZE value. - -source "board/compulab/cm_t54/Kconfig" -source "board/ti/omap5_uevm/Kconfig" -source "board/ti/dra7xx/Kconfig" -source "board/ti/am57xx/Kconfig" - -endif diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile deleted file mode 100644 index 0212df7..0000000 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# -# (C) Copyright 2000-2010 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += boot.o -obj-y += hwinit.o -obj-y += emif.o -obj-y += sdram.o -obj-y += prcm-regs.o -obj-y += hw_data.o -obj-y += abb.o -obj-y += fdt.o -obj-$(CONFIG_IODELAY_RECALIBRATION) += dra7xx_iodelay.o -obj-$(CONFIG_TI_SECURE_DEVICE) += sec-fxns.o diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c deleted file mode 100644 index 3bf8897..0000000 --- a/arch/arm/cpu/armv7/omap5/abb.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Adaptive Body Bias programming sequence for OMAP5 family - * - * (C) Copyright 2013 - * Texas Instruments, - * - * Andrii Tseglytskyi - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* - * Setup LDOVBB for OMAP5. - * On OMAP5+ some ABB settings are fused. They are handled - * in the following way: - * - * 1. corresponding EFUSE register contains ABB enable bit - * and VSET value - * 2. If ABB enable bit is set to 1, than ABB should be - * enabled, otherwise ABB should be disabled - * 3. If ABB is enabled, than VSET value should be copied - * to corresponding MUX control register - */ -s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) -{ - u32 vset; - u32 fuse_enable_mask = OMAP5_ABB_FUSE_ENABLE_MASK; - u32 fuse_vset_mask = OMAP5_ABB_FUSE_VSET_MASK; - - if (!is_omap54xx()) { - /* DRA7 */ - fuse_enable_mask = DRA7_ABB_FUSE_ENABLE_MASK; - fuse_vset_mask = DRA7_ABB_FUSE_VSET_MASK; - } - /* - * ABB parameters must be properly fused - * otherwise ABB should be disabled - */ - vset = readl(fuse); - if (!(vset & fuse_enable_mask)) - return -1; - - /* prepare VSET value for LDOVBB mux register */ - vset &= fuse_vset_mask; - vset >>= ffs(fuse_vset_mask) - 1; - vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1; - vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK; - - /* setup LDOVBB using fused value */ - clrsetbits_le32(ldovbb, OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset); - - return 0; -} diff --git a/arch/arm/cpu/armv7/omap5/boot.c b/arch/arm/cpu/armv7/omap5/boot.c deleted file mode 100644 index 583becc..0000000 --- a/arch/arm/cpu/armv7/omap5/boot.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * OMAP5 boot - * - * Copyright (C) 2015 Paul Kocialkowski - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static u32 boot_devices[] = { -#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) - BOOT_DEVICE_MMC2, - BOOT_DEVICE_NAND, - BOOT_DEVICE_MMC1, - BOOT_DEVICE_SATA, - BOOT_DEVICE_XIP, - BOOT_DEVICE_XIP, - BOOT_DEVICE_SPI, - BOOT_DEVICE_SPI, -#else - BOOT_DEVICE_MMC2, - BOOT_DEVICE_NAND, - BOOT_DEVICE_MMC1, - BOOT_DEVICE_SATA, - BOOT_DEVICE_XIP, - BOOT_DEVICE_MMC2, - BOOT_DEVICE_XIPWAIT, -#endif -}; - -u32 omap_sys_boot_device(void) -{ - u32 sys_boot; - - /* Grab the first 4 bits of the status register for SYS_BOOT. */ - sys_boot = readl((u32 *) (*ctrl)->control_status) & ((1 << 4) - 1); - - if (sys_boot >= (sizeof(boot_devices) / sizeof(u32))) - return BOOT_DEVICE_NONE; - - return boot_devices[sys_boot]; -} diff --git a/arch/arm/cpu/armv7/omap5/config.mk b/arch/arm/cpu/armv7/omap5/config.mk deleted file mode 100644 index 286ca86..0000000 --- a/arch/arm/cpu/armv7/omap5/config.mk +++ /dev/null @@ -1,22 +0,0 @@ -# -# Copyright 2011 Linaro Limited -# -# Aneesh V -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(srctree)/$(CPUDIR)/omap-common/config_secure.mk - -ifdef CONFIG_SPL_BUILD -ifeq ($(CONFIG_TI_SECURE_DEVICE),y) -ALL-y += u-boot-spl_HS_MLO u-boot-spl_HS_X-LOADER -else -ALL-y += MLO -endif -else -ifeq ($(CONFIG_TI_SECURE_DEVICE),y) -ALL-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img -endif -ALL-y += u-boot.img -endif diff --git a/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c b/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c deleted file mode 100644 index 8798730..0000000 --- a/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * (C) Copyright 2015 - * Texas Instruments Incorporated, - * - * Lokesh Vutla - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -static int isolate_io(u32 isolate) -{ - if (isolate) { - clrsetbits_le32((*ctrl)->control_pbias, SDCARD_PWRDNZ, - SDCARD_PWRDNZ); - clrsetbits_le32((*ctrl)->control_pbias, SDCARD_BIAS_PWRDNZ, - SDCARD_BIAS_PWRDNZ); - } - - /* Override control on ISOCLKIN signal to IO pad ring. */ - clrsetbits_le32((*prcm)->prm_io_pmctrl, PMCTRL_ISOCLK_OVERRIDE_MASK, - PMCTRL_ISOCLK_OVERRIDE_CTRL); - if (!wait_on_value(PMCTRL_ISOCLK_STATUS_MASK, PMCTRL_ISOCLK_STATUS_MASK, - (u32 *)(*prcm)->prm_io_pmctrl, LDELAY)) - return ERR_DEISOLATE_IO << isolate; - - /* Isolate/Deisolate IO */ - clrsetbits_le32((*ctrl)->ctrl_core_sma_sw_0, CTRL_ISOLATE_MASK, - isolate << CTRL_ISOLATE_SHIFT); - /* Dummy read to add delay t > 10ns */ - readl((*ctrl)->ctrl_core_sma_sw_0); - - /* Return control on ISOCLKIN to hardware */ - clrsetbits_le32((*prcm)->prm_io_pmctrl, PMCTRL_ISOCLK_OVERRIDE_MASK, - PMCTRL_ISOCLK_NOT_OVERRIDE_CTRL); - if (!wait_on_value(PMCTRL_ISOCLK_STATUS_MASK, - 0 << PMCTRL_ISOCLK_STATUS_SHIFT, - (u32 *)(*prcm)->prm_io_pmctrl, LDELAY)) - return ERR_DEISOLATE_IO << isolate; - - return 0; -} - -static int calibrate_iodelay(u32 base) -{ - u32 reg; - - /* Configure REFCLK period */ - reg = readl(base + CFG_REG_2_OFFSET); - reg &= ~CFG_REG_REFCLK_PERIOD_MASK; - reg |= CFG_REG_REFCLK_PERIOD; - writel(reg, base + CFG_REG_2_OFFSET); - - /* Initiate Calibration */ - clrsetbits_le32(base + CFG_REG_0_OFFSET, CFG_REG_CALIB_STRT_MASK, - CFG_REG_CALIB_STRT << CFG_REG_CALIB_STRT_SHIFT); - if (!wait_on_value(CFG_REG_CALIB_STRT_MASK, CFG_REG_CALIB_END, - (u32 *)(base + CFG_REG_0_OFFSET), LDELAY)) - return ERR_CALIBRATE_IODELAY; - - return 0; -} - -static int update_delay_mechanism(u32 base) -{ - /* Initiate the reload of calibrated values. */ - clrsetbits_le32(base + CFG_REG_0_OFFSET, CFG_REG_ROM_READ_MASK, - CFG_REG_ROM_READ_START); - if (!wait_on_value(CFG_REG_ROM_READ_MASK, CFG_REG_ROM_READ_END, - (u32 *)(base + CFG_REG_0_OFFSET), LDELAY)) - return ERR_UPDATE_DELAY; - - return 0; -} - -static u32 calculate_delay(u32 base, u16 offset, u16 den) -{ - u16 refclk_period, dly_cnt, ref_cnt; - u32 reg, q, r; - - refclk_period = readl(base + CFG_REG_2_OFFSET) & - CFG_REG_REFCLK_PERIOD_MASK; - - reg = readl(base + offset); - dly_cnt = (reg & CFG_REG_DLY_CNT_MASK) >> CFG_REG_DLY_CNT_SHIFT; - ref_cnt = (reg & CFG_REG_REF_CNT_MASK) >> CFG_REG_REF_CNT_SHIFT; - - if (!dly_cnt || !den) - return 0; - - /* - * To avoid overflow and integer truncation, delay value - * is calculated as quotient + remainder. - */ - q = 5 * ((ref_cnt * refclk_period) / (dly_cnt * den)); - r = (10 * ((ref_cnt * refclk_period) % (dly_cnt * den))) / - (2 * dly_cnt * den); - - return q + r; -} - -static u32 get_cfg_reg(u16 a_delay, u16 g_delay, u32 cpde, u32 fpde) -{ - u32 g_delay_coarse, g_delay_fine; - u32 a_delay_coarse, a_delay_fine; - u32 c_elements, f_elements; - u32 total_delay, reg = 0; - - g_delay_coarse = g_delay / 920; - g_delay_fine = ((g_delay % 920) * 10) / 60; - - a_delay_coarse = a_delay / cpde; - a_delay_fine = ((a_delay % cpde) * 10) / fpde; - - c_elements = g_delay_coarse + a_delay_coarse; - f_elements = (g_delay_fine + a_delay_fine) / 10; - - if (f_elements > 22) { - total_delay = c_elements * cpde + f_elements * fpde; - - c_elements = total_delay / cpde; - f_elements = (total_delay % cpde) / fpde; - } - - reg = (c_elements << CFG_X_COARSE_DLY_SHIFT) & CFG_X_COARSE_DLY_MASK; - reg |= (f_elements << CFG_X_FINE_DLY_SHIFT) & CFG_X_FINE_DLY_MASK; - reg |= CFG_X_SIGNATURE << CFG_X_SIGNATURE_SHIFT; - reg |= CFG_X_LOCK << CFG_X_LOCK_SHIFT; - - return reg; -} - -int do_set_iodelay(u32 base, struct iodelay_cfg_entry const *array, - int niodelays) -{ - struct iodelay_cfg_entry *iodelay = (struct iodelay_cfg_entry *)array; - u32 reg, cpde, fpde, i; - - if (!niodelays) - return 0; - - cpde = calculate_delay((*ctrl)->iodelay_config_base, CFG_REG_3_OFFSET, - 88); - if (!cpde) - return ERR_CPDE; - - fpde = calculate_delay((*ctrl)->iodelay_config_base, CFG_REG_4_OFFSET, - 264); - if (!fpde) - return ERR_FPDE; - - for (i = 0; i < niodelays; i++, iodelay++) { - reg = get_cfg_reg(iodelay->a_delay, iodelay->g_delay, cpde, - fpde); - writel(reg, base + iodelay->offset); - } - - return 0; -} - -int __recalibrate_iodelay_start(void) -{ - int ret = 0; - - /* IO recalibration should be done only from SRAM */ - if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) { - puts("IODELAY recalibration called from invalid context - use only from SPL in SRAM\n"); - return -1; - } - - /* unlock IODELAY CONFIG registers */ - writel(CFG_IODELAY_UNLOCK_KEY, (*ctrl)->iodelay_config_base + - CFG_REG_8_OFFSET); - - ret = calibrate_iodelay((*ctrl)->iodelay_config_base); - if (ret) - goto err; - - ret = isolate_io(ISOLATE_IO); - if (ret) - goto err; - - ret = update_delay_mechanism((*ctrl)->iodelay_config_base); - -err: - return ret; -} - -void __recalibrate_iodelay_end(int ret) -{ - - /* IO recalibration should be done only from SRAM */ - if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) { - puts("IODELAY recalibration called from invalid context - use only from SPL in SRAM\n"); - return; - } - - if (!ret) - ret = isolate_io(DEISOLATE_IO); - - /* lock IODELAY CONFIG registers */ - writel(CFG_IODELAY_LOCK_KEY, (*ctrl)->iodelay_config_base + - CFG_REG_8_OFFSET); - - /* - * UART cannot be used during IO recalibration sequence as IOs are in - * isolation. So error handling and debug prints are done after - * complete IO delay recalibration sequence - */ - switch (ret) { - case ERR_CALIBRATE_IODELAY: - puts("IODELAY: IO delay calibration sequence failed\n"); - break; - case ERR_ISOLATE_IO: - puts("IODELAY: Isolation of Device IOs failed\n"); - break; - case ERR_UPDATE_DELAY: - puts("IODELAY: Delay mechanism update with new calibrated values failed\n"); - break; - case ERR_DEISOLATE_IO: - puts("IODELAY: De-isolation of Device IOs failed\n"); - break; - case ERR_CPDE: - puts("IODELAY: CPDE calculation failed\n"); - break; - case ERR_FPDE: - puts("IODELAY: FPDE calculation failed\n"); - break; - case -1: - puts("IODELAY: Wrong Context call?\n"); - break; - default: - debug("IODELAY: IO delay recalibration successfully completed\n"); - } - - return; -} - -void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads, - struct iodelay_cfg_entry const *iodelay, - int niodelays) -{ - int ret = 0; - - /* IO recalibration should be done only from SRAM */ - if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) { - puts("IODELAY recalibration called from invalid context - use only from SPL in SRAM\n"); - return; - } - - ret = __recalibrate_iodelay_start(); - if (ret) - goto err; - - /* Configure Mux settings */ - do_set_mux32((*ctrl)->control_padconf_core_base, pad, npads); - - /* Configure Manual IO timing modes */ - ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays); - if (ret) - goto err; - -err: - __recalibrate_iodelay_end(ret); - -} diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/cpu/armv7/omap5/emif.c deleted file mode 100644 index b1203a3..0000000 --- a/arch/arm/cpu/armv7/omap5/emif.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * EMIF programming - * - * (C) Copyright 2010 - * Texas Instruments, - * - * Aneesh V for OMAP4 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg)) -static u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM; -static u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN; -#endif - -#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -/* Base AC Timing values specified by JESD209-2 for 532MHz operation */ -static const struct lpddr2_ac_timings timings_jedec_532_mhz = { - .max_freq = 532000000, - .RL = 8, - .tRPab = 21, - .tRCD = 18, - .tWR = 15, - .tRASmin = 42, - .tRRD = 10, - .tWTRx2 = 15, - .tXSR = 140, - .tXPx2 = 15, - .tRFCab = 130, - .tRTPx2 = 15, - .tCKE = 3, - .tCKESR = 15, - .tZQCS = 90, - .tZQCL = 360, - .tZQINIT = 1000, - .tDQSCKMAXx2 = 11, - .tRASmax = 70, - .tFAW = 50 -}; - -/* - * Min tCK values specified by JESD209-2 - * Min tCK specifies the minimum duration of some AC timing parameters in terms - * of the number of cycles. If the calculated number of cycles based on the - * absolute time value is less than the min tCK value, min tCK value should - * be used instead. This typically happens at low frequencies. - */ -static const struct lpddr2_min_tck min_tck_jedec = { - .tRL = 3, - .tRP_AB = 3, - .tRCD = 3, - .tWR = 3, - .tRAS_MIN = 3, - .tRRD = 2, - .tWTR = 2, - .tXP = 2, - .tRTP = 2, - .tCKE = 3, - .tCKESR = 3, - .tFAW = 8 -}; - -static const struct lpddr2_ac_timings const* - jedec_ac_timings[MAX_NUM_SPEEDBINS] = { - &timings_jedec_532_mhz -}; - -static const struct lpddr2_device_timings jedec_default_timings = { - .ac_timings = jedec_ac_timings, - .min_tck = &min_tck_jedec -}; - -void emif_get_device_timings(u32 emif_nr, - const struct lpddr2_device_timings **cs0_device_timings, - const struct lpddr2_device_timings **cs1_device_timings) -{ - /* Assume Identical devices on EMIF1 & EMIF2 */ - *cs0_device_timings = &jedec_default_timings; - *cs1_device_timings = NULL; -} -#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ diff --git a/arch/arm/cpu/armv7/omap5/fdt.c b/arch/arm/cpu/armv7/omap5/fdt.c deleted file mode 100644 index da8d59b..0000000 --- a/arch/arm/cpu/armv7/omap5/fdt.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - * Copyright 2016 Texas Instruments, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#include -#include - -#ifdef CONFIG_TI_SECURE_DEVICE - -/* Give zero values if not already defined */ -#ifndef TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ -#define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ (0) -#endif -#ifndef CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ -#define CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ (0) -#endif - -static u32 hs_irq_skip[] = { - 8, /* Secure violation reporting interrupt */ - 15, /* One interrupt for SDMA by secure world */ - 118 /* One interrupt for Crypto DMA by secure world */ -}; - -static int ft_hs_fixup_crossbar(void *fdt, bd_t *bd) -{ - const char *path; - int offs; - int ret; - int len, i, old_cnt, new_cnt; - u32 *temp; - const u32 *p_data; - - /* - * Increase the size of the fdt - * so we have some breathing room - */ - ret = fdt_increase_size(fdt, 512); - if (ret < 0) { - printf("Could not increase size of device tree: %s\n", - fdt_strerror(ret)); - return ret; - } - - /* Reserve IRQs that are used/needed by secure world */ - path = "/ocp/crossbar"; - offs = fdt_path_offset(fdt, path); - if (offs < 0) { - debug("Node %s not found.\n", path); - return 0; - } - - /* Get current entries */ - p_data = fdt_getprop(fdt, offs, "ti,irqs-skip", &len); - if (p_data) - old_cnt = len / sizeof(u32); - else - old_cnt = 0; - - new_cnt = sizeof(hs_irq_skip) / - sizeof(hs_irq_skip[0]); - - /* Create new/updated skip list for HS parts */ - temp = malloc(sizeof(u32) * (old_cnt + new_cnt)); - for (i = 0; i < new_cnt; i++) - temp[i] = cpu_to_fdt32(hs_irq_skip[i]); - for (i = 0; i < old_cnt; i++) - temp[i + new_cnt] = p_data[i]; - - /* Blow away old data and set new data */ - fdt_delprop(fdt, offs, "ti,irqs-skip"); - ret = fdt_setprop(fdt, offs, "ti,irqs-skip", - temp, - (old_cnt + new_cnt) * sizeof(u32)); - free(temp); - - /* Check if the update worked */ - if (ret < 0) { - printf("Could not add ti,irqs-skip property to node %s: %s\n", - path, fdt_strerror(ret)); - return ret; - } - - return 0; -} - -static int ft_hs_disable_rng(void *fdt, bd_t *bd) -{ - const char *path; - int offs; - int ret; - - /* Make HW RNG reserved for secure world use */ - path = "/ocp/rng"; - offs = fdt_path_offset(fdt, path); - if (offs < 0) { - debug("Node %s not found.\n", path); - return 0; - } - ret = fdt_setprop_string(fdt, offs, - "status", "disabled"); - if (ret < 0) { - printf("Could not add status property to node %s: %s\n", - path, fdt_strerror(ret)); - return ret; - } - return 0; -} - -#if ((TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ != 0) || \ - (CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ != 0)) -static int ft_hs_fixup_sram(void *fdt, bd_t *bd) -{ - const char *path; - int offs; - int ret; - u32 temp[2]; - - /* - * Update SRAM reservations on secure devices. The OCMC RAM - * is always reserved for secure use from the start of that - * memory region - */ - path = "/ocp/ocmcram@40300000/sram-hs"; - offs = fdt_path_offset(fdt, path); - if (offs < 0) { - debug("Node %s not found.\n", path); - return 0; - } - - /* relative start offset */ - temp[0] = cpu_to_fdt32(0); - /* reservation size */ - temp[1] = cpu_to_fdt32(max(TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ, - CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ)); - fdt_delprop(fdt, offs, "reg"); - ret = fdt_setprop(fdt, offs, "reg", temp, 2 * sizeof(u32)); - if (ret < 0) { - printf("Could not add reg property to node %s: %s\n", - path, fdt_strerror(ret)); - return ret; - } - - return 0; -} -#else -static int ft_hs_fixup_sram(void *fdt, bd_t *bd) { return 0; } -#endif - -#if (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE != 0) -static int ft_hs_fixup_dram(void *fdt, bd_t *bd) -{ - const char *path, *subpath; - int offs; - u32 sec_mem_start = CONFIG_TI_SECURE_EMIF_REGION_START; - u32 sec_mem_size = CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE; - fdt64_t temp[2]; - - /* If start address is zero, place at end of DRAM */ - if (0 == sec_mem_start) - sec_mem_start = - (CONFIG_SYS_SDRAM_BASE + - (omap_sdram_size() - sec_mem_size)); - - /* Delete any original secure_reserved node */ - path = "/reserved-memory/secure_reserved"; - offs = fdt_path_offset(fdt, path); - if (offs >= 0) - fdt_del_node(fdt, offs); - - /* Add new secure_reserved node */ - path = "/reserved-memory"; - offs = fdt_path_offset(fdt, path); - if (offs < 0) { - debug("Node %s not found\n", path); - path = "/"; - subpath = "reserved-memory"; - fdt_path_offset(fdt, path); - offs = fdt_add_subnode(fdt, offs, subpath); - if (offs < 0) { - printf("Could not create %s%s node.\n", path, subpath); - return 1; - } - path = "/reserved-memory"; - offs = fdt_path_offset(fdt, path); - } - - subpath = "secure_reserved"; - offs = fdt_add_subnode(fdt, offs, subpath); - if (offs < 0) { - printf("Could not create %s%s node.\n", path, subpath); - return 1; - } - - temp[0] = cpu_to_fdt64(((u64)sec_mem_start)); - temp[1] = cpu_to_fdt64(((u64)sec_mem_size)); - fdt_setprop_string(fdt, offs, "compatible", - "ti,dra7-secure-memory"); - fdt_setprop_string(fdt, offs, "status", "okay"); - fdt_setprop(fdt, offs, "no-map", NULL, 0); - fdt_setprop(fdt, offs, "reg", temp, sizeof(temp)); - - return 0; -} -#else -static int ft_hs_fixup_dram(void *fdt, bd_t *bd) { return 0; } -#endif - -static void ft_hs_fixups(void *fdt, bd_t *bd) -{ - /* Check we are running on an HS/EMU device type */ - if (GP_DEVICE != get_device_type()) { - if ((ft_hs_fixup_crossbar(fdt, bd) == 0) && - (ft_hs_disable_rng(fdt, bd) == 0) && - (ft_hs_fixup_sram(fdt, bd) == 0) && - (ft_hs_fixup_dram(fdt, bd) == 0)) - return; - } else { - printf("ERROR: Incorrect device type (GP) detected!"); - } - /* Fixup failed or wrong device type */ - hang(); -} -#else -static void ft_hs_fixups(void *fdt, bd_t *bd) -{ -} -#endif /* #ifdef CONFIG_TI_SECURE_DEVICE */ - -/* - * Place for general cpu/SoC FDT fixups. Board specific - * fixups should remain in the board files which is where - * this function should be called from. - */ -void ft_cpu_setup(void *fdt, bd_t *bd) -{ - ft_hs_fixups(fdt, bd); -} diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c deleted file mode 100644 index fc99135..0000000 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ /dev/null @@ -1,776 +0,0 @@ -/* - * - * HW data initialization for OMAP5 - * - * (C) Copyright 2013 - * Texas Instruments, - * - * Sricharan R - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct prcm_regs const **prcm = - (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; -struct dplls const **dplls_data = - (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; -struct vcores_data const **omap_vcores = - (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; -struct omap_sys_ctrl_regs const **ctrl = - (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL; - -/* OPP HIGH FREQUENCY for ES2.0 */ -static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { - {125, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {625, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {750, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 15, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* OPP NOM FREQUENCY for ES1.0 */ -static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = { - {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* OPP LOW FREQUENCY for ES1.0 */ -static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = { - {200, 2, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {375, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {375, 17, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* OPP LOW FREQUENCY for ES2.0 */ -static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = { - {499, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {297, 9, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {493, 18, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {499, 25, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {493, 37, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* OPP NOM FREQUENCY for OMAP5 ES2.0, and DRA7 ES1.0 */ -static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = { - {250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ - {119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { - {266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 16.8 MHz */ - {277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 19.2 MHz */ - {368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = { - {266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 16.8 MHz */ - {277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 19.2 MHz */ - {368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = { - {266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 12 MHz */ - {266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 20 MHz */ - {443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 16.8 MHz */ - {277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 19.2 MHz */ - {368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = { - {266, 2, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {443, 6, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 16.8 MHz */ - {277, 4, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 19.2 MHz */ - {368, 8, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {277, 9, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr266_es2[NUM_SYS_CLKS] = { - {266, 2, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {443, 6, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 16.8 MHz */ - {277, 4, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 19.2 MHz */ - {368, 8, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {277, 9, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { - {32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ - {20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ - {192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = { - {32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ - {20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ - {192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = { - {32, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 12 MHz */ - {96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 20 MHz */ - {160, 6, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 16.8 MHz */ - {20, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 19.2 MHz */ - {192, 12, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {10, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 38.4 MHz */ -}; - -static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { - {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = { - {1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ - {208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ -}; - -/* ABE M & N values with sys_clk as source */ -static const struct dpll_params - abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { - {49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with 32K clock as source */ -static const struct dpll_params abe_dpll_params_32k_196608khz = { - 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 -}; - -/* ABE M & N values with sysclk2(22.5792 MHz) as input */ -static const struct dpll_params - abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = { - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ -}; - -static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { - {400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ - {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ -}; - -static const struct dpll_params ddr_dpll_params_2664mhz[NUM_SYS_CLKS] = { - {111, 0, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {333, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ - {555, 6, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {555, 7, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {666, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {555, 15, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ -}; - -static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = { - {266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ - {190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ -}; - -static const struct dpll_params gmac_dpll_params_2000mhz[NUM_SYS_CLKS] = { - {250, 2, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 12 MHz */ - {250, 4, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 20 MHz */ - {119, 1, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 11, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {500, 12, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 23, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 38.4 MHz */ -}; - -struct dplls omap5_dplls_es1 = { - .mpu = mpu_dpll_params_800mhz, - .core = core_dpll_params_2128mhz_ddr532, - .per = per_dpll_params_768mhz, - .iva = iva_dpll_params_2330mhz, -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - .abe = abe_dpll_params_sysclk_196608khz, -#else - .abe = &abe_dpll_params_32k_196608khz, -#endif - .usb = usb_dpll_params_1920mhz, - .ddr = NULL -}; - -struct dplls omap5_dplls_es2 = { - .mpu = mpu_dpll_params_1ghz, - .core = core_dpll_params_2128mhz_ddr532_es2, - .per = per_dpll_params_768mhz_es2, - .iva = iva_dpll_params_2330mhz, -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - .abe = abe_dpll_params_sysclk_196608khz, -#else - .abe = &abe_dpll_params_32k_196608khz, -#endif - .usb = usb_dpll_params_1920mhz, - .ddr = NULL -}; - -struct dplls dra7xx_dplls = { - .mpu = mpu_dpll_params_1ghz, - .core = core_dpll_params_2128mhz_dra7xx, - .per = per_dpll_params_768mhz_dra7xx, - .abe = abe_dpll_params_sysclk2_361267khz, - .iva = iva_dpll_params_2330mhz_dra7xx, - .usb = usb_dpll_params_1920mhz, - .ddr = ddr_dpll_params_2128mhz, - .gmac = gmac_dpll_params_2000mhz, -}; - -struct dplls dra72x_dplls = { - .mpu = mpu_dpll_params_1ghz, - .core = core_dpll_params_2128mhz_dra7xx, - .per = per_dpll_params_768mhz_dra7xx, - .abe = abe_dpll_params_sysclk2_361267khz, - .iva = iva_dpll_params_2330mhz_dra7xx, - .usb = usb_dpll_params_1920mhz, - .ddr = ddr_dpll_params_2664mhz, - .gmac = gmac_dpll_params_2000mhz, -}; - -struct pmic_data palmas = { - .base_offset = PALMAS_SMPS_BASE_VOLT_UV, - .step = 10000, /* 10 mV represented in uV */ - /* - * Offset codes 1-6 all give the base voltage in Palmas - * Offset code 0 switches OFF the SMPS - */ - .start_code = 6, - .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, - .pmic_bus_init = sri2c_init, - .pmic_write = omap_vc_bypass_send_value, - .gpio_en = 0, -}; - -/* The TPS659038 and TPS65917 are software-compatible, use common struct */ -struct pmic_data tps659038 = { - .base_offset = PALMAS_SMPS_BASE_VOLT_UV, - .step = 10000, /* 10 mV represented in uV */ - /* - * Offset codes 1-6 all give the base voltage in Palmas - * Offset code 0 switches OFF the SMPS - */ - .start_code = 6, - .i2c_slave_addr = TPS659038_I2C_SLAVE_ADDR, - .pmic_bus_init = gpi2c_init, - .pmic_write = palmas_i2c_write_u8, - .gpio_en = 0, -}; - -struct vcores_data omap5430_volts = { - .mpu.value = VDD_MPU, - .mpu.addr = SMPS_REG_ADDR_12_MPU, - .mpu.pmic = &palmas, - - .core.value = VDD_CORE, - .core.addr = SMPS_REG_ADDR_8_CORE, - .core.pmic = &palmas, - - .mm.value = VDD_MM, - .mm.addr = SMPS_REG_ADDR_45_IVA, - .mm.pmic = &palmas, -}; - -struct vcores_data omap5430_volts_es2 = { - .mpu.value = VDD_MPU_ES2, - .mpu.addr = SMPS_REG_ADDR_12_MPU, - .mpu.pmic = &palmas, - .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK, - - .core.value = VDD_CORE_ES2, - .core.addr = SMPS_REG_ADDR_8_CORE, - .core.pmic = &palmas, - - .mm.value = VDD_MM_ES2, - .mm.addr = SMPS_REG_ADDR_45_IVA, - .mm.pmic = &palmas, - .mm.abb_tx_done_mask = OMAP_ABB_MM_TXDONE_MASK, -}; - -/* - * Enable essential clock domains, modules and - * do some additional special settings needed - */ -void enable_basic_clocks(void) -{ - u32 const clk_domains_essential[] = { - (*prcm)->cm_l4per_clkstctrl, - (*prcm)->cm_l3init_clkstctrl, - (*prcm)->cm_memif_clkstctrl, - (*prcm)->cm_l4cfg_clkstctrl, -#ifdef CONFIG_DRIVER_TI_CPSW - (*prcm)->cm_gmac_clkstctrl, -#endif - 0 - }; - - u32 const clk_modules_hw_auto_essential[] = { - (*prcm)->cm_l3_gpmc_clkctrl, - (*prcm)->cm_memif_emif_1_clkctrl, - (*prcm)->cm_memif_emif_2_clkctrl, - (*prcm)->cm_l4cfg_l4_cfg_clkctrl, - (*prcm)->cm_wkup_gpio1_clkctrl, - (*prcm)->cm_l4per_gpio2_clkctrl, - (*prcm)->cm_l4per_gpio3_clkctrl, - (*prcm)->cm_l4per_gpio4_clkctrl, - (*prcm)->cm_l4per_gpio5_clkctrl, - (*prcm)->cm_l4per_gpio6_clkctrl, - (*prcm)->cm_l4per_gpio7_clkctrl, - (*prcm)->cm_l4per_gpio8_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_essential[] = { - (*prcm)->cm_wkup_gptimer1_clkctrl, - (*prcm)->cm_l3init_hsmmc1_clkctrl, - (*prcm)->cm_l3init_hsmmc2_clkctrl, - (*prcm)->cm_l4per_gptimer2_clkctrl, - (*prcm)->cm_wkup_wdtimer2_clkctrl, - (*prcm)->cm_l4per_uart3_clkctrl, - (*prcm)->cm_l4per_i2c1_clkctrl, -#ifdef CONFIG_DRIVER_TI_CPSW - (*prcm)->cm_gmac_gmac_clkctrl, -#endif - -#ifdef CONFIG_TI_QSPI - (*prcm)->cm_l4per_qspi_clkctrl, -#endif - 0 - }; - - /* Enable optional additional functional clock for GPIO4 */ - setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, - GPIO4_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable 96 MHz clock for MMC1 & MMC2 */ - setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - - /* Set the correct clock dividers for mmc */ - setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_DIV_MASK); - setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_DIV_MASK); - - /* Select 32KHz clock as the source of GPTIMER1 */ - setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, - GPTIMER1_CLKCTRL_CLKSEL_MASK); - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); - -#ifdef CONFIG_TI_QSPI - setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24)); -#endif - - /* Enable SCRM OPT clocks for PER and CORE dpll */ - setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, - OPTFCLKEN_SCRM_PER_MASK); - setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, - OPTFCLKEN_SCRM_CORE_MASK); -} - -void enable_basic_uboot_clocks(void) -{ - u32 const clk_domains_essential[] = { -#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) - (*prcm)->cm_ipu_clkstctrl, -#endif - 0 - }; - - u32 const clk_modules_hw_auto_essential[] = { - (*prcm)->cm_l3init_hsusbtll_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_essential[] = { - (*prcm)->cm_l4per_mcspi1_clkctrl, - (*prcm)->cm_l4per_i2c2_clkctrl, - (*prcm)->cm_l4per_i2c3_clkctrl, - (*prcm)->cm_l4per_i2c4_clkctrl, -#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) - (*prcm)->cm_ipu_i2c5_clkctrl, -#else - (*prcm)->cm_l4per_i2c5_clkctrl, -#endif - (*prcm)->cm_l3init_hsusbhost_clkctrl, - (*prcm)->cm_l3init_fsusb_clkctrl, - 0 - }; - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -#ifdef CONFIG_TI_EDMA3 -void enable_edma3_clocks(void) -{ - u32 const clk_domains_edma3[] = { - 0 - }; - - u32 const clk_modules_hw_auto_edma3[] = { - (*prcm)->cm_l3main1_tptc1_clkctrl, - (*prcm)->cm_l3main1_tptc2_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_edma3[] = { - 0 - }; - - do_enable_clocks(clk_domains_edma3, - clk_modules_hw_auto_edma3, - clk_modules_explicit_en_edma3, - 1); -} - -void disable_edma3_clocks(void) -{ - u32 const clk_domains_edma3[] = { - 0 - }; - - u32 const clk_modules_disable_edma3[] = { - (*prcm)->cm_l3main1_tptc1_clkctrl, - (*prcm)->cm_l3main1_tptc2_clkctrl, - 0 - }; - - do_disable_clocks(clk_domains_edma3, - clk_modules_disable_edma3, - 1); -} -#endif - -#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) -void enable_usb_clocks(int index) -{ - u32 cm_l3init_usb_otg_ss_clkctrl = 0; - - if (index == 0) { - cm_l3init_usb_otg_ss_clkctrl = - (*prcm)->cm_l3init_usb_otg_ss1_clkctrl; - /* Enable 960 MHz clock for dwc3 */ - setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl, - OPTFCLKEN_REFCLK960M); - - /* Enable 32 KHz clock for USB_PHY1 */ - setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl, - USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); - - /* Enable 32 KHz clock for USB_PHY3 */ - if (is_dra7xx()) - setbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl, - USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); - } else if (index == 1) { - cm_l3init_usb_otg_ss_clkctrl = - (*prcm)->cm_l3init_usb_otg_ss2_clkctrl; - /* Enable 960 MHz clock for dwc3 */ - setbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl, - OPTFCLKEN_REFCLK960M); - - /* Enable 32 KHz clock for dwc3 */ - setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl, - USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); - - /* Enable 60 MHz clock for USB2PHY2 */ - setbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl, - L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK); - } - - u32 const clk_domains_usb[] = { - 0 - }; - - u32 const clk_modules_hw_auto_usb[] = { - (*prcm)->cm_l3init_ocp2scp1_clkctrl, - cm_l3init_usb_otg_ss_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_usb[] = { - 0 - }; - - do_enable_clocks(clk_domains_usb, - clk_modules_hw_auto_usb, - clk_modules_explicit_en_usb, - 1); -} - -void disable_usb_clocks(int index) -{ - u32 cm_l3init_usb_otg_ss_clkctrl = 0; - - if (index == 0) { - cm_l3init_usb_otg_ss_clkctrl = - (*prcm)->cm_l3init_usb_otg_ss1_clkctrl; - /* Disable 960 MHz clock for dwc3 */ - clrbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl, - OPTFCLKEN_REFCLK960M); - - /* Disable 32 KHz clock for USB_PHY1 */ - clrbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl, - USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); - - /* Disable 32 KHz clock for USB_PHY3 */ - if (is_dra7xx()) - clrbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl, - USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); - } else if (index == 1) { - cm_l3init_usb_otg_ss_clkctrl = - (*prcm)->cm_l3init_usb_otg_ss2_clkctrl; - /* Disable 960 MHz clock for dwc3 */ - clrbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl, - OPTFCLKEN_REFCLK960M); - - /* Disable 32 KHz clock for dwc3 */ - clrbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl, - USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); - - /* Disable 60 MHz clock for USB2PHY2 */ - clrbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl, - L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK); - } - - u32 const clk_domains_usb[] = { - 0 - }; - - u32 const clk_modules_disable[] = { - (*prcm)->cm_l3init_ocp2scp1_clkctrl, - cm_l3init_usb_otg_ss_clkctrl, - 0 - }; - - do_disable_clocks(clk_domains_usb, - clk_modules_disable, - 1); -} -#endif - -const struct ctrl_ioregs ioregs_omap5430 = { - .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - .ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, - .ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, - .ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, -}; - -const struct ctrl_ioregs ioregs_omap5432_es1 = { - .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - .ctrl_lpddr2ch = 0x0, - .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, - .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE, - .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE, - .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE, - .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - .ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, -}; - -const struct ctrl_ioregs ioregs_omap5432_es2 = { - .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, - .ctrl_lpddr2ch = 0x0, - .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, - .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2, - .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2, - .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2, - .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - .ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, -}; - -const struct ctrl_ioregs ioregs_dra7xx_es1 = { - .ctrl_ddrch = 0x40404040, - .ctrl_lpddr2ch = 0x40404040, - .ctrl_ddr3ch = 0x80808080, - .ctrl_ddrio_0 = 0x00094A40, - .ctrl_ddrio_1 = 0x04A52000, - .ctrl_ddrio_2 = 0x84210000, - .ctrl_emif_sdram_config_ext = 0x0001C1A7, - .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, - .ctrl_ddr_ctrl_ext_0 = 0xA2000000, -}; - -const struct ctrl_ioregs ioregs_dra72x_es1 = { - .ctrl_ddrch = 0x40404040, - .ctrl_lpddr2ch = 0x40404040, - .ctrl_ddr3ch = 0x60606080, - .ctrl_ddrio_0 = 0x00094A40, - .ctrl_ddrio_1 = 0x04A52000, - .ctrl_ddrio_2 = 0x84210000, - .ctrl_emif_sdram_config_ext = 0x0001C1A7, - .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, - .ctrl_ddr_ctrl_ext_0 = 0xA2000000, -}; - -const struct ctrl_ioregs ioregs_dra72x_es2 = { - .ctrl_ddrch = 0x40404040, - .ctrl_lpddr2ch = 0x40404040, - .ctrl_ddr3ch = 0x60606060, - .ctrl_ddrio_0 = 0x00094A40, - .ctrl_ddrio_1 = 0x00000000, - .ctrl_ddrio_2 = 0x00000000, - .ctrl_emif_sdram_config_ext = 0x0001C1A7, - .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, - .ctrl_ddr_ctrl_ext_0 = 0xA2000000, -}; - -void __weak hw_data_init(void) -{ - u32 omap_rev = omap_revision(); - - switch (omap_rev) { - - case OMAP5430_ES1_0: - case OMAP5432_ES1_0: - *prcm = &omap5_es1_prcm; - *dplls_data = &omap5_dplls_es1; - *omap_vcores = &omap5430_volts; - *ctrl = &omap5_ctrl; - break; - - case OMAP5430_ES2_0: - case OMAP5432_ES2_0: - *prcm = &omap5_es2_prcm; - *dplls_data = &omap5_dplls_es2; - *omap_vcores = &omap5430_volts_es2; - *ctrl = &omap5_ctrl; - break; - - case DRA752_ES1_0: - case DRA752_ES1_1: - case DRA752_ES2_0: - *prcm = &dra7xx_prcm; - *dplls_data = &dra7xx_dplls; - *ctrl = &dra7xx_ctrl; - break; - - case DRA722_ES1_0: - case DRA722_ES2_0: - *prcm = &dra7xx_prcm; - *dplls_data = &dra72x_dplls; - *ctrl = &dra7xx_ctrl; - break; - - default: - printf("\n INVALID OMAP REVISION "); - } -} - -void get_ioregs(const struct ctrl_ioregs **regs) -{ - u32 omap_rev = omap_revision(); - - switch (omap_rev) { - case OMAP5430_ES1_0: - case OMAP5430_ES2_0: - *regs = &ioregs_omap5430; - break; - case OMAP5432_ES1_0: - *regs = &ioregs_omap5432_es1; - break; - case OMAP5432_ES2_0: - *regs = &ioregs_omap5432_es2; - break; - case DRA752_ES1_0: - case DRA752_ES1_1: - case DRA752_ES2_0: - *regs = &ioregs_dra7xx_es1; - break; - case DRA722_ES1_0: - *regs = &ioregs_dra72x_es1; - break; - case DRA722_ES2_0: - *regs = &ioregs_dra72x_es2; - break; - - default: - printf("\n INVALID OMAP REVISION "); - } -} diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c deleted file mode 100644 index e3ac8bb..0000000 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ /dev/null @@ -1,453 +0,0 @@ -/* - * - * Functions for omap5 based boards. - * - * (C) Copyright 2011 - * Texas Instruments, - * - * Author : - * Aneesh V - * Steve Sakoman - * Sricharan - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV; - -#ifndef CONFIG_DM_GPIO -static struct gpio_bank gpio_bank_54xx[8] = { - { (void *)OMAP54XX_GPIO1_BASE }, - { (void *)OMAP54XX_GPIO2_BASE }, - { (void *)OMAP54XX_GPIO3_BASE }, - { (void *)OMAP54XX_GPIO4_BASE }, - { (void *)OMAP54XX_GPIO5_BASE }, - { (void *)OMAP54XX_GPIO6_BASE }, - { (void *)OMAP54XX_GPIO7_BASE }, - { (void *)OMAP54XX_GPIO8_BASE }, -}; - -const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; -#endif - -void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size) -{ - int i; - struct pad_conf_entry *pad = (struct pad_conf_entry *)array; - - for (i = 0; i < size; i++, pad++) - writel(pad->val, base + pad->offset); -} - -#ifdef CONFIG_SPL_BUILD -/* LPDDR2 specific IO settings */ -static void io_settings_lpddr2(void) -{ - const struct ctrl_ioregs *ioregs; - - get_ioregs(&ioregs); - writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); - writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); - writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); - writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); - writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); - writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); - writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); - writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); - writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); -} - -/* DDR3 specific IO settings */ -static void io_settings_ddr3(void) -{ - u32 io_settings = 0; - const struct ctrl_ioregs *ioregs; - - get_ioregs(&ioregs); - writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0); - writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); - writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); - - writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0); - writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); - writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); - - writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); - writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); - - if (!is_dra7xx()) { - writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); - writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); - } - - /* omap5432 does not use lpddr2 */ - writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); - - writel(ioregs->ctrl_emif_sdram_config_ext, - (*ctrl)->control_emif1_sdram_config_ext); - if (!is_dra72x()) - writel(ioregs->ctrl_emif_sdram_config_ext, - (*ctrl)->control_emif2_sdram_config_ext); - - if (is_omap54xx()) { - /* Disable DLL select */ - io_settings = (readl((*ctrl)->control_port_emif1_sdram_config) - & 0xFFEFFFFF); - writel(io_settings, - (*ctrl)->control_port_emif1_sdram_config); - - io_settings = (readl((*ctrl)->control_port_emif2_sdram_config) - & 0xFFEFFFFF); - writel(io_settings, - (*ctrl)->control_port_emif2_sdram_config); - } else { - writel(ioregs->ctrl_ddr_ctrl_ext_0, - (*ctrl)->control_ddr_control_ext_0); - } -} - -/* - * Some tuning of IOs for optimal power and performance - */ -void do_io_settings(void) -{ - u32 io_settings = 0, mask = 0; - struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; - - /* Impedance settings EMMC, C2C 1,2, hsi2 */ - mask = (ds_mask << 2) | (ds_mask << 8) | - (ds_mask << 16) | (ds_mask << 18); - io_settings = readl((*ctrl)->control_smart1io_padconf_0) & - (~mask); - io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) | - (ds_45_ohm << 18) | (ds_60_ohm << 2); - writel(io_settings, (*ctrl)->control_smart1io_padconf_0); - - /* Impedance settings Mcspi2 */ - mask = (ds_mask << 30); - io_settings = readl((*ctrl)->control_smart1io_padconf_1) & - (~mask); - io_settings |= (ds_60_ohm << 30); - writel(io_settings, (*ctrl)->control_smart1io_padconf_1); - - /* Impedance settings C2C 3,4 */ - mask = (ds_mask << 14) | (ds_mask << 16); - io_settings = readl((*ctrl)->control_smart1io_padconf_2) & - (~mask); - io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16); - writel(io_settings, (*ctrl)->control_smart1io_padconf_2); - - /* Slew rate settings EMMC, C2C 1,2 */ - mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18); - io_settings = readl((*ctrl)->control_smart2io_padconf_0) & - (~mask); - io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18); - writel(io_settings, (*ctrl)->control_smart2io_padconf_0); - - /* Slew rate settings hsi2, Mcspi2 */ - mask = (sc_mask << 24) | (sc_mask << 28); - io_settings = readl((*ctrl)->control_smart2io_padconf_1) & - (~mask); - io_settings |= (sc_fast << 28) | (sc_fast << 24); - writel(io_settings, (*ctrl)->control_smart2io_padconf_1); - - /* Slew rate settings C2C 3,4 */ - mask = (sc_mask << 16) | (sc_mask << 18); - io_settings = readl((*ctrl)->control_smart2io_padconf_2) & - (~mask); - io_settings |= (sc_na << 16) | (sc_na << 18); - writel(io_settings, (*ctrl)->control_smart2io_padconf_2); - - /* impedance and slew rate settings for usb */ - mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) | - (usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14); - io_settings = readl((*ctrl)->control_smart3io_padconf_1) & - (~mask); - io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) | - (ds_60_ohm << 23) | (sc_fast << 20) | - (sc_fast << 17) | (sc_fast << 14); - writel(io_settings, (*ctrl)->control_smart3io_padconf_1); - - if (emif_sdram_type(emif->emif_sdram_config) == EMIF_SDRAM_TYPE_LPDDR2) - io_settings_lpddr2(); - else - io_settings_ddr3(); -} - -static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = { - {0x45, 0x1}, /* 12 MHz */ - {-1, -1}, /* 13 MHz */ - {0x63, 0x2}, /* 16.8 MHz */ - {0x57, 0x2}, /* 19.2 MHz */ - {0x20, 0x1}, /* 26 MHz */ - {-1, -1}, /* 27 MHz */ - {0x41, 0x3} /* 38.4 MHz */ -}; - -void srcomp_enable(void) -{ - u32 srcomp_value, mul_factor, div_factor, clk_val, i; - u32 sysclk_ind = get_sys_clk_index(); - u32 omap_rev = omap_revision(); - - if (!is_omap54xx()) - return; - - mul_factor = srcomp_parameters[sysclk_ind].multiply_factor; - div_factor = srcomp_parameters[sysclk_ind].divide_factor; - - for (i = 0; i < 4; i++) { - srcomp_value = readl((*ctrl)->control_srcomp_north_side + i*4); - srcomp_value &= - ~(MULTIPLY_FACTOR_XS_MASK | DIVIDE_FACTOR_XS_MASK); - srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) | - (div_factor << DIVIDE_FACTOR_XS_SHIFT); - writel(srcomp_value, (*ctrl)->control_srcomp_north_side + i*4); - } - - if ((omap_rev == OMAP5430_ES1_0) || (omap_rev == OMAP5432_ES1_0)) { - clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl); - clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; - writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl); - - for (i = 0; i < 4; i++) { - srcomp_value = - readl((*ctrl)->control_srcomp_north_side + i*4); - srcomp_value &= ~PWRDWN_XS_MASK; - writel(srcomp_value, - (*ctrl)->control_srcomp_north_side + i*4); - - while (((readl((*ctrl)->control_srcomp_north_side + i*4) - & SRCODE_READ_XS_MASK) >> - SRCODE_READ_XS_SHIFT) == 0) - ; - - srcomp_value = - readl((*ctrl)->control_srcomp_north_side + i*4); - srcomp_value &= ~OVERRIDE_XS_MASK; - writel(srcomp_value, - (*ctrl)->control_srcomp_north_side + i*4); - } - } else { - srcomp_value = readl((*ctrl)->control_srcomp_east_side_wkup); - srcomp_value &= ~(MULTIPLY_FACTOR_XS_MASK | - DIVIDE_FACTOR_XS_MASK); - srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) | - (div_factor << DIVIDE_FACTOR_XS_SHIFT); - writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); - - for (i = 0; i < 4; i++) { - srcomp_value = - readl((*ctrl)->control_srcomp_north_side + i*4); - srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK; - writel(srcomp_value, - (*ctrl)->control_srcomp_north_side + i*4); - - srcomp_value = - readl((*ctrl)->control_srcomp_north_side + i*4); - srcomp_value &= ~OVERRIDE_XS_MASK; - writel(srcomp_value, - (*ctrl)->control_srcomp_north_side + i*4); - } - - srcomp_value = - readl((*ctrl)->control_srcomp_east_side_wkup); - srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK; - writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); - - srcomp_value = - readl((*ctrl)->control_srcomp_east_side_wkup); - srcomp_value &= ~OVERRIDE_XS_MASK; - writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); - - clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl); - clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; - writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl); - - clk_val = readl((*prcm)->cm_wkupaon_io_srcomp_clkctrl); - clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; - writel(clk_val, (*prcm)->cm_wkupaon_io_srcomp_clkctrl); - - for (i = 0; i < 4; i++) { - while (((readl((*ctrl)->control_srcomp_north_side + i*4) - & SRCODE_READ_XS_MASK) >> - SRCODE_READ_XS_SHIFT) == 0) - ; - - srcomp_value = - readl((*ctrl)->control_srcomp_north_side + i*4); - srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK; - writel(srcomp_value, - (*ctrl)->control_srcomp_north_side + i*4); - } - - while (((readl((*ctrl)->control_srcomp_east_side_wkup) & - SRCODE_READ_XS_MASK) >> SRCODE_READ_XS_SHIFT) == 0) - ; - - srcomp_value = - readl((*ctrl)->control_srcomp_east_side_wkup); - srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK; - writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); - } -} -#endif - -void config_data_eye_leveling_samples(u32 emif_base) -{ - const struct ctrl_ioregs *ioregs; - - get_ioregs(&ioregs); - - /*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/ - if (emif_base == EMIF1_BASE) - writel(ioregs->ctrl_emif_sdram_config_ext_final, - (*ctrl)->control_emif1_sdram_config_ext); - else if (emif_base == EMIF2_BASE) - writel(ioregs->ctrl_emif_sdram_config_ext_final, - (*ctrl)->control_emif2_sdram_config_ext); -} - -void init_cpu_configuration(void) -{ - u32 l2actlr; - - asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r"(l2actlr)); - /* - * L2ACTLR: Ensure to enable the following: - * 3: Disable clean/evict push to external - * 4: Disable WriteUnique and WriteLineUnique transactions from master - * 8: Disable DVM/CMO message broadcast - */ - l2actlr |= 0x118; - omap_smc1(OMAP5_SERVICE_L2ACTLR_SET, l2actlr); -} - -void init_omap_revision(void) -{ - /* - * For some of the ES2/ES1 boards ID_CODE is not reliable: - * Also, ES1 and ES2 have different ARM revisions - * So use ARM revision for identification - */ - unsigned int rev = cortex_rev(); - - switch (readl(CONTROL_ID_CODE)) { - case OMAP5430_CONTROL_ID_CODE_ES1_0: - *omap_si_rev = OMAP5430_ES1_0; - if (rev == MIDR_CORTEX_A15_R2P2) - *omap_si_rev = OMAP5430_ES2_0; - break; - case OMAP5432_CONTROL_ID_CODE_ES1_0: - *omap_si_rev = OMAP5432_ES1_0; - if (rev == MIDR_CORTEX_A15_R2P2) - *omap_si_rev = OMAP5432_ES2_0; - break; - case OMAP5430_CONTROL_ID_CODE_ES2_0: - *omap_si_rev = OMAP5430_ES2_0; - break; - case OMAP5432_CONTROL_ID_CODE_ES2_0: - *omap_si_rev = OMAP5432_ES2_0; - break; - case DRA752_CONTROL_ID_CODE_ES1_0: - *omap_si_rev = DRA752_ES1_0; - break; - case DRA752_CONTROL_ID_CODE_ES1_1: - *omap_si_rev = DRA752_ES1_1; - break; - case DRA752_CONTROL_ID_CODE_ES2_0: - *omap_si_rev = DRA752_ES2_0; - break; - case DRA722_CONTROL_ID_CODE_ES1_0: - *omap_si_rev = DRA722_ES1_0; - break; - case DRA722_CONTROL_ID_CODE_ES2_0: - *omap_si_rev = DRA722_ES2_0; - break; - default: - *omap_si_rev = OMAP5430_SILICON_ID_INVALID; - } - init_cpu_configuration(); -} - -void omap_die_id(unsigned int *die_id) -{ - die_id[0] = readl((*ctrl)->control_std_fuse_die_id_0); - die_id[1] = readl((*ctrl)->control_std_fuse_die_id_1); - die_id[2] = readl((*ctrl)->control_std_fuse_die_id_2); - die_id[3] = readl((*ctrl)->control_std_fuse_die_id_3); -} - -void reset_cpu(ulong ignored) -{ - u32 omap_rev = omap_revision(); - - /* - * WARM reset is not functional in case of OMAP5430 ES1.0 soc. - * So use cold reset in case instead. - */ - if (omap_rev == OMAP5430_ES1_0) - writel(PRM_RSTCTRL_RESET << 0x1, (*prcm)->prm_rstctrl); - else - writel(PRM_RSTCTRL_RESET, (*prcm)->prm_rstctrl); -} - -u32 warm_reset(void) -{ - return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK; -} - -void setup_warmreset_time(void) -{ - u32 rst_time, rst_val; - -#ifndef CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC - rst_time = CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC; -#else - rst_time = CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC; -#endif - rst_time = usec_to_32k(rst_time) << RSTTIME1_SHIFT; - - if (rst_time > RSTTIME1_MASK) - rst_time = RSTTIME1_MASK; - - rst_val = readl((*prcm)->prm_rsttime) & ~RSTTIME1_MASK; - rst_val |= rst_time; - writel(rst_val, (*prcm)->prm_rsttime); -} - -void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr, - u32 cpu_rev_comb, u32 cpu_variant, - u32 cpu_rev) -{ - omap_smc1(OMAP5_SERVICE_L2ACTLR_SET, l2auxctrl); -} - -void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb, - u32 cpu_variant, u32 cpu_rev) -{ - -#ifdef CONFIG_ARM_ERRATA_801819 - /* - * DRA72x processors are uniprocessors and DONOT have - * ACP (Accelerator Coherency Port) hooked to ACE (AXI Coherency - * Extensions) Hence the erratum workaround is not applicable for - * DRA72x processors. - */ - if (is_dra72x()) - acr &= ~((0x3 << 23) | (0x3 << 25)); -#endif - omap_smc1(OMAP5_SERVICE_ACR_SET, acr); -} diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c deleted file mode 100644 index b5f1d70..0000000 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ /dev/null @@ -1,1024 +0,0 @@ -/* - * - * HW regs data for OMAP5 Soc - * - * (C) Copyright 2013 - * Texas Instruments, - * - * Sricharan R - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -struct prcm_regs const omap5_es1_prcm = { - /* cm1.ckgen */ - .cm_clksel_core = 0x4a004100, - .cm_clksel_abe = 0x4a004108, - .cm_dll_ctrl = 0x4a004110, - .cm_clkmode_dpll_core = 0x4a004120, - .cm_idlest_dpll_core = 0x4a004124, - .cm_autoidle_dpll_core = 0x4a004128, - .cm_clksel_dpll_core = 0x4a00412c, - .cm_div_m2_dpll_core = 0x4a004130, - .cm_div_m3_dpll_core = 0x4a004134, - .cm_div_h11_dpll_core = 0x4a004138, - .cm_div_h12_dpll_core = 0x4a00413c, - .cm_div_h13_dpll_core = 0x4a004140, - .cm_div_h14_dpll_core = 0x4a004144, - .cm_ssc_deltamstep_dpll_core = 0x4a004148, - .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, - .cm_emu_override_dpll_core = 0x4a004150, - .cm_div_h22_dpllcore = 0x4a004154, - .cm_div_h23_dpll_core = 0x4a004158, - .cm_clkmode_dpll_mpu = 0x4a004160, - .cm_idlest_dpll_mpu = 0x4a004164, - .cm_autoidle_dpll_mpu = 0x4a004168, - .cm_clksel_dpll_mpu = 0x4a00416c, - .cm_div_m2_dpll_mpu = 0x4a004170, - .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, - .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, - .cm_bypclk_dpll_mpu = 0x4a00419c, - .cm_clkmode_dpll_iva = 0x4a0041a0, - .cm_idlest_dpll_iva = 0x4a0041a4, - .cm_autoidle_dpll_iva = 0x4a0041a8, - .cm_clksel_dpll_iva = 0x4a0041ac, - .cm_div_h11_dpll_iva = 0x4a0041b8, - .cm_div_h12_dpll_iva = 0x4a0041bc, - .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, - .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, - .cm_bypclk_dpll_iva = 0x4a0041dc, - .cm_clkmode_dpll_abe = 0x4a0041e0, - .cm_idlest_dpll_abe = 0x4a0041e4, - .cm_autoidle_dpll_abe = 0x4a0041e8, - .cm_clksel_dpll_abe = 0x4a0041ec, - .cm_div_m2_dpll_abe = 0x4a0041f0, - .cm_div_m3_dpll_abe = 0x4a0041f4, - .cm_ssc_deltamstep_dpll_abe = 0x4a004208, - .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, - .cm_clkmode_dpll_ddrphy = 0x4a004220, - .cm_idlest_dpll_ddrphy = 0x4a004224, - .cm_autoidle_dpll_ddrphy = 0x4a004228, - .cm_clksel_dpll_ddrphy = 0x4a00422c, - .cm_div_m2_dpll_ddrphy = 0x4a004230, - .cm_div_h11_dpll_ddrphy = 0x4a004238, - .cm_div_h12_dpll_ddrphy = 0x4a00423c, - .cm_div_h13_dpll_ddrphy = 0x4a004240, - .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, - .cm_shadow_freq_config1 = 0x4a004260, - .cm_mpu_mpu_clkctrl = 0x4a004320, - - /* cm1.dsp */ - .cm_dsp_clkstctrl = 0x4a004400, - .cm_dsp_dsp_clkctrl = 0x4a004420, - - /* cm1.abe */ - .cm1_abe_clkstctrl = 0x4a004500, - .cm1_abe_l4abe_clkctrl = 0x4a004520, - .cm1_abe_aess_clkctrl = 0x4a004528, - .cm1_abe_pdm_clkctrl = 0x4a004530, - .cm1_abe_dmic_clkctrl = 0x4a004538, - .cm1_abe_mcasp_clkctrl = 0x4a004540, - .cm1_abe_mcbsp1_clkctrl = 0x4a004548, - .cm1_abe_mcbsp2_clkctrl = 0x4a004550, - .cm1_abe_mcbsp3_clkctrl = 0x4a004558, - .cm1_abe_slimbus_clkctrl = 0x4a004560, - .cm1_abe_timer5_clkctrl = 0x4a004568, - .cm1_abe_timer6_clkctrl = 0x4a004570, - .cm1_abe_timer7_clkctrl = 0x4a004578, - .cm1_abe_timer8_clkctrl = 0x4a004580, - .cm1_abe_wdt3_clkctrl = 0x4a004588, - - /* cm2.ckgen */ - .cm_clksel_mpu_m3_iss_root = 0x4a008100, - .cm_clksel_usb_60mhz = 0x4a008104, - .cm_scale_fclk = 0x4a008108, - .cm_core_dvfs_perf1 = 0x4a008110, - .cm_core_dvfs_perf2 = 0x4a008114, - .cm_core_dvfs_perf3 = 0x4a008118, - .cm_core_dvfs_perf4 = 0x4a00811c, - .cm_core_dvfs_current = 0x4a008124, - .cm_iva_dvfs_perf_tesla = 0x4a008128, - .cm_iva_dvfs_perf_ivahd = 0x4a00812c, - .cm_iva_dvfs_perf_abe = 0x4a008130, - .cm_iva_dvfs_current = 0x4a008138, - .cm_clkmode_dpll_per = 0x4a008140, - .cm_idlest_dpll_per = 0x4a008144, - .cm_autoidle_dpll_per = 0x4a008148, - .cm_clksel_dpll_per = 0x4a00814c, - .cm_div_m2_dpll_per = 0x4a008150, - .cm_div_m3_dpll_per = 0x4a008154, - .cm_div_h11_dpll_per = 0x4a008158, - .cm_div_h12_dpll_per = 0x4a00815c, - .cm_div_h14_dpll_per = 0x4a008164, - .cm_ssc_deltamstep_dpll_per = 0x4a008168, - .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, - .cm_emu_override_dpll_per = 0x4a008170, - .cm_clkmode_dpll_usb = 0x4a008180, - .cm_idlest_dpll_usb = 0x4a008184, - .cm_autoidle_dpll_usb = 0x4a008188, - .cm_clksel_dpll_usb = 0x4a00818c, - .cm_div_m2_dpll_usb = 0x4a008190, - .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, - .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, - .cm_clkdcoldo_dpll_usb = 0x4a0081b4, - .cm_clkmode_dpll_unipro = 0x4a0081c0, - .cm_idlest_dpll_unipro = 0x4a0081c4, - .cm_autoidle_dpll_unipro = 0x4a0081c8, - .cm_clksel_dpll_unipro = 0x4a0081cc, - .cm_div_m2_dpll_unipro = 0x4a0081d0, - .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, - .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, - - /* cm2.core */ - .cm_coreaon_bandgap_clkctrl = 0x4a008648, - .cm_coreaon_io_srcomp_clkctrl = 0x4a008650, - .cm_l3_1_clkstctrl = 0x4a008700, - .cm_l3_1_dynamicdep = 0x4a008708, - .cm_l3_1_l3_1_clkctrl = 0x4a008720, - .cm_l3_2_clkstctrl = 0x4a008800, - .cm_l3_2_dynamicdep = 0x4a008808, - .cm_l3_2_l3_2_clkctrl = 0x4a008820, - .cm_l3_gpmc_clkctrl = 0x4a008828, - .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, - .cm_mpu_m3_clkstctrl = 0x4a008900, - .cm_mpu_m3_staticdep = 0x4a008904, - .cm_mpu_m3_dynamicdep = 0x4a008908, - .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, - .cm_sdma_clkstctrl = 0x4a008a00, - .cm_sdma_staticdep = 0x4a008a04, - .cm_sdma_dynamicdep = 0x4a008a08, - .cm_sdma_sdma_clkctrl = 0x4a008a20, - .cm_memif_clkstctrl = 0x4a008b00, - .cm_memif_dmm_clkctrl = 0x4a008b20, - .cm_memif_emif_fw_clkctrl = 0x4a008b28, - .cm_memif_emif_1_clkctrl = 0x4a008b30, - .cm_memif_emif_2_clkctrl = 0x4a008b38, - .cm_memif_dll_clkctrl = 0x4a008b40, - .cm_memif_emif_h1_clkctrl = 0x4a008b50, - .cm_memif_emif_h2_clkctrl = 0x4a008b58, - .cm_memif_dll_h_clkctrl = 0x4a008b60, - .cm_c2c_clkstctrl = 0x4a008c00, - .cm_c2c_staticdep = 0x4a008c04, - .cm_c2c_dynamicdep = 0x4a008c08, - .cm_c2c_sad2d_clkctrl = 0x4a008c20, - .cm_c2c_modem_icr_clkctrl = 0x4a008c28, - .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, - .cm_l4cfg_clkstctrl = 0x4a008d00, - .cm_l4cfg_dynamicdep = 0x4a008d08, - .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, - .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, - .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, - .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, - .cm_l3instr_clkstctrl = 0x4a008e00, - .cm_l3instr_l3_3_clkctrl = 0x4a008e20, - .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, - .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, - - /* cm2.ivahd */ - .cm_ivahd_clkstctrl = 0x4a008f00, - .cm_ivahd_ivahd_clkctrl = 0x4a008f20, - .cm_ivahd_sl2_clkctrl = 0x4a008f28, - - /* cm2.cam */ - .cm_cam_clkstctrl = 0x4a009000, - .cm_cam_iss_clkctrl = 0x4a009020, - .cm_cam_fdif_clkctrl = 0x4a009028, - - /* cm2.dss */ - .cm_dss_clkstctrl = 0x4a009100, - .cm_dss_dss_clkctrl = 0x4a009120, - - /* cm2.sgx */ - .cm_sgx_clkstctrl = 0x4a009200, - .cm_sgx_sgx_clkctrl = 0x4a009220, - - /* cm2.l3init */ - .cm_l3init_clkstctrl = 0x4a009300, - .cm_l3init_hsmmc1_clkctrl = 0x4a009328, - .cm_l3init_hsmmc2_clkctrl = 0x4a009330, - .cm_l3init_hsi_clkctrl = 0x4a009338, - .cm_l3init_hsusbhost_clkctrl = 0x4a009358, - .cm_l3init_hsusbotg_clkctrl = 0x4a009360, - .cm_l3init_hsusbtll_clkctrl = 0x4a009368, - .cm_l3init_p1500_clkctrl = 0x4a009378, - .cm_l3init_sata_clkctrl = 0x4a009388, - .cm_l3init_fsusb_clkctrl = 0x4a0093d0, - .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0, - .cm_l3init_ocp2scp3_clkctrl = 0x4a0093e8, - - /* cm2.l4per */ - .cm_l4per_clkstctrl = 0x4a009400, - .cm_l4per_dynamicdep = 0x4a009408, - .cm_l4per_adc_clkctrl = 0x4a009420, - .cm_l4per_gptimer10_clkctrl = 0x4a009428, - .cm_l4per_gptimer11_clkctrl = 0x4a009430, - .cm_l4per_gptimer2_clkctrl = 0x4a009438, - .cm_l4per_gptimer3_clkctrl = 0x4a009440, - .cm_l4per_gptimer4_clkctrl = 0x4a009448, - .cm_l4per_gptimer9_clkctrl = 0x4a009450, - .cm_l4per_elm_clkctrl = 0x4a009458, - .cm_l4per_gpio2_clkctrl = 0x4a009460, - .cm_l4per_gpio3_clkctrl = 0x4a009468, - .cm_l4per_gpio4_clkctrl = 0x4a009470, - .cm_l4per_gpio5_clkctrl = 0x4a009478, - .cm_l4per_gpio6_clkctrl = 0x4a009480, - .cm_l4per_hdq1w_clkctrl = 0x4a009488, - .cm_l4per_hecc1_clkctrl = 0x4a009490, - .cm_l4per_hecc2_clkctrl = 0x4a009498, - .cm_l4per_i2c1_clkctrl = 0x4a0094a0, - .cm_l4per_i2c2_clkctrl = 0x4a0094a8, - .cm_l4per_i2c3_clkctrl = 0x4a0094b0, - .cm_l4per_i2c4_clkctrl = 0x4a0094b8, - .cm_l4per_l4per_clkctrl = 0x4a0094c0, - .cm_l4per_mcasp2_clkctrl = 0x4a0094d0, - .cm_l4per_mcasp3_clkctrl = 0x4a0094d8, - .cm_l4per_mgate_clkctrl = 0x4a0094e8, - .cm_l4per_mcspi1_clkctrl = 0x4a0094f0, - .cm_l4per_mcspi2_clkctrl = 0x4a0094f8, - .cm_l4per_mcspi3_clkctrl = 0x4a009500, - .cm_l4per_mcspi4_clkctrl = 0x4a009508, - .cm_l4per_gpio7_clkctrl = 0x4a009510, - .cm_l4per_gpio8_clkctrl = 0x4a009518, - .cm_l4per_mmcsd3_clkctrl = 0x4a009520, - .cm_l4per_mmcsd4_clkctrl = 0x4a009528, - .cm_l4per_msprohg_clkctrl = 0x4a009530, - .cm_l4per_slimbus2_clkctrl = 0x4a009538, - .cm_l4per_uart1_clkctrl = 0x4a009540, - .cm_l4per_uart2_clkctrl = 0x4a009548, - .cm_l4per_uart3_clkctrl = 0x4a009550, - .cm_l4per_uart4_clkctrl = 0x4a009558, - .cm_l4per_mmcsd5_clkctrl = 0x4a009560, - .cm_l4per_i2c5_clkctrl = 0x4a009568, - .cm_l4per_uart5_clkctrl = 0x4a009570, - .cm_l4per_uart6_clkctrl = 0x4a009578, - .cm_l4sec_clkstctrl = 0x4a009580, - .cm_l4sec_staticdep = 0x4a009584, - .cm_l4sec_dynamicdep = 0x4a009588, - .cm_l4sec_aes1_clkctrl = 0x4a0095a0, - .cm_l4sec_aes2_clkctrl = 0x4a0095a8, - .cm_l4sec_des3des_clkctrl = 0x4a0095b0, - .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8, - .cm_l4sec_rng_clkctrl = 0x4a0095c0, - .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8, - .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8, - - /* l4 wkup regs */ - .cm_abe_pll_ref_clksel = 0x4ae0610c, - .cm_sys_clksel = 0x4ae06110, - .cm_wkup_clkstctrl = 0x4ae07800, - .cm_wkup_l4wkup_clkctrl = 0x4ae07820, - .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, - .cm_wkup_wdtimer2_clkctrl = 0x4ae07830, - .cm_wkup_gpio1_clkctrl = 0x4ae07838, - .cm_wkup_gptimer1_clkctrl = 0x4ae07840, - .cm_wkup_gptimer12_clkctrl = 0x4ae07848, - .cm_wkup_synctimer_clkctrl = 0x4ae07850, - .cm_wkup_usim_clkctrl = 0x4ae07858, - .cm_wkup_sarram_clkctrl = 0x4ae07860, - .cm_wkup_keyboard_clkctrl = 0x4ae07878, - .cm_wkup_rtc_clkctrl = 0x4ae07880, - .cm_wkup_bandgap_clkctrl = 0x4ae07888, - .cm_wkupaon_scrm_clkctrl = 0x4ae07890, - .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898, - .prm_rstctrl = 0x4ae07b00, - .prm_rstst = 0x4ae07b04, - .prm_rsttime = 0x4ae07b08, - .prm_vc_val_bypass = 0x4ae07ba0, - .prm_vc_cfg_i2c_mode = 0x4ae07bb4, - .prm_vc_cfg_i2c_clk = 0x4ae07bb8, - - /* SCRM stuff, used by some boards */ - .scrm_auxclk0 = 0x4ae0a310, - .scrm_auxclk1 = 0x4ae0a314, -}; - -struct omap_sys_ctrl_regs const omap5_ctrl = { - .control_status = 0x4A002134, - .control_std_fuse_die_id_0 = 0x4A002200, - .control_std_fuse_die_id_1 = 0x4A002208, - .control_std_fuse_die_id_2 = 0x4A00220C, - .control_std_fuse_die_id_3 = 0x4A002210, - .control_phy_power_usb = 0x4A002370, - .control_phy_power_sata = 0x4A002374, - .control_padconf_core_base = 0x4A002800, - .control_paconf_global = 0x4A002DA0, - .control_paconf_mode = 0x4A002DA4, - .control_smart1io_padconf_0 = 0x4A002DA8, - .control_smart1io_padconf_1 = 0x4A002DAC, - .control_smart1io_padconf_2 = 0x4A002DB0, - .control_smart2io_padconf_0 = 0x4A002DB4, - .control_smart2io_padconf_1 = 0x4A002DB8, - .control_smart2io_padconf_2 = 0x4A002DBC, - .control_smart3io_padconf_0 = 0x4A002DC0, - .control_smart3io_padconf_1 = 0x4A002DC4, - .control_pbias = 0x4A002E00, - .control_i2c_0 = 0x4A002E04, - .control_camera_rx = 0x4A002E08, - .control_hdmi_tx_phy = 0x4A002E0C, - .control_uniportm = 0x4A002E10, - .control_dsiphy = 0x4A002E14, - .control_mcbsplp = 0x4A002E18, - .control_usb2phycore = 0x4A002E1C, - .control_hdmi_1 = 0x4A002E20, - .control_hsi = 0x4A002E24, - .control_ddr3ch1_0 = 0x4A002E30, - .control_ddr3ch2_0 = 0x4A002E34, - .control_ddrch1_0 = 0x4A002E38, - .control_ddrch1_1 = 0x4A002E3C, - .control_ddrch2_0 = 0x4A002E40, - .control_ddrch2_1 = 0x4A002E44, - .control_lpddr2ch1_0 = 0x4A002E48, - .control_lpddr2ch1_1 = 0x4A002E4C, - .control_ddrio_0 = 0x4A002E50, - .control_ddrio_1 = 0x4A002E54, - .control_ddrio_2 = 0x4A002E58, - .control_hyst_1 = 0x4A002E5C, - .control_usbb_hsic_control = 0x4A002E60, - .control_c2c = 0x4A002E64, - .control_core_control_spare_rw = 0x4A002E68, - .control_core_control_spare_r = 0x4A002E6C, - .control_core_control_spare_r_c0 = 0x4A002E70, - .control_srcomp_north_side = 0x4A002E74, - .control_srcomp_south_side = 0x4A002E78, - .control_srcomp_east_side = 0x4A002E7C, - .control_srcomp_west_side = 0x4A002E80, - .control_srcomp_code_latch = 0x4A002E84, - .control_port_emif1_sdram_config = 0x4AE0C110, - .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, - .control_port_emif2_sdram_config = 0x4AE0C118, - .control_emif1_sdram_config_ext = 0x4AE0C144, - .control_emif2_sdram_config_ext = 0x4AE0C148, - .control_wkup_ldovbb_mpu_voltage_ctrl = 0x4AE0C318, - .control_wkup_ldovbb_mm_voltage_ctrl = 0x4AE0C314, - .control_padconf_wkup_base = 0x4AE0C800, - .control_smart1nopmio_padconf_0 = 0x4AE0CDA0, - .control_smart1nopmio_padconf_1 = 0x4AE0CDA4, - .control_padconf_mode = 0x4AE0CDA8, - .control_xtal_oscillator = 0x4AE0CDAC, - .control_i2c_2 = 0x4AE0CDB0, - .control_ckobuffer = 0x4AE0CDB4, - .control_wkup_control_spare_rw = 0x4AE0CDB8, - .control_wkup_control_spare_r = 0x4AE0CDBC, - .control_wkup_control_spare_r_c0 = 0x4AE0CDC0, - .control_srcomp_east_side_wkup = 0x4AE0CDC4, - .control_efuse_1 = 0x4AE0CDC8, - .control_efuse_2 = 0x4AE0CDCC, - .control_efuse_3 = 0x4AE0CDD0, - .control_efuse_4 = 0x4AE0CDD4, - .control_efuse_5 = 0x4AE0CDD8, - .control_efuse_6 = 0x4AE0CDDC, - .control_efuse_7 = 0x4AE0CDE0, - .control_efuse_8 = 0x4AE0CDE4, - .control_efuse_9 = 0x4AE0CDE8, - .control_efuse_10 = 0x4AE0CDEC, - .control_efuse_11 = 0x4AE0CDF0, - .control_efuse_12 = 0x4AE0CDF4, - .control_efuse_13 = 0x4AE0CDF8, -}; - -struct omap_sys_ctrl_regs const dra7xx_ctrl = { - .control_status = 0x4A002134, - .control_phy_power_usb = 0x4A002370, - .control_phy_power_sata = 0x4A002374, - .ctrl_core_sma_sw_0 = 0x4A0023FC, - .ctrl_core_sma_sw_1 = 0x4A002534, - .control_core_mac_id_0_lo = 0x4A002514, - .control_core_mac_id_0_hi = 0x4A002518, - .control_core_mac_id_1_lo = 0x4A00251C, - .control_core_mac_id_1_hi = 0x4A002520, - .control_core_mmr_lock1 = 0x4A002540, - .control_core_mmr_lock2 = 0x4A002544, - .control_core_mmr_lock3 = 0x4A002548, - .control_core_mmr_lock4 = 0x4A00254C, - .control_core_mmr_lock5 = 0x4A002550, - .control_core_control_io1 = 0x4A002554, - .control_core_control_io2 = 0x4A002558, - .control_paconf_global = 0x4A002DA0, - .control_paconf_mode = 0x4A002DA4, - .control_smart1io_padconf_0 = 0x4A002DA8, - .control_smart1io_padconf_1 = 0x4A002DAC, - .control_smart1io_padconf_2 = 0x4A002DB0, - .control_smart2io_padconf_0 = 0x4A002DB4, - .control_smart2io_padconf_1 = 0x4A002DB8, - .control_smart2io_padconf_2 = 0x4A002DBC, - .control_smart3io_padconf_0 = 0x4A002DC0, - .control_smart3io_padconf_1 = 0x4A002DC4, - .control_pbias = 0x4A002E00, - .control_i2c_0 = 0x4A002E04, - .control_camera_rx = 0x4A002E08, - .control_hdmi_tx_phy = 0x4A002E0C, - .control_uniportm = 0x4A002E10, - .control_dsiphy = 0x4A002E14, - .control_mcbsplp = 0x4A002E18, - .control_usb2phycore = 0x4A002E1C, - .control_hdmi_1 = 0x4A002E20, - .control_hsi = 0x4A002E24, - .control_ddr3ch1_0 = 0x4A002E30, - .control_ddr3ch2_0 = 0x4A002E34, - .control_ddrch1_0 = 0x4A002E38, - .control_ddrch1_1 = 0x4A002E3C, - .control_ddrch2_0 = 0x4A002E40, - .control_ddrch2_1 = 0x4A002E44, - .control_lpddr2ch1_0 = 0x4A002E48, - .control_lpddr2ch1_1 = 0x4A002E4C, - .control_ddrio_0 = 0x4A002E50, - .control_ddrio_1 = 0x4A002E54, - .control_ddrio_2 = 0x4A002E58, - .control_hyst_1 = 0x4A002E5C, - .control_usbb_hsic_control = 0x4A002E60, - .control_c2c = 0x4A002E64, - .control_core_control_spare_rw = 0x4A002E68, - .control_core_control_spare_r = 0x4A002E6C, - .control_core_control_spare_r_c0 = 0x4A002E70, - .control_srcomp_north_side = 0x4A002E74, - .control_srcomp_south_side = 0x4A002E78, - .control_srcomp_east_side = 0x4A002E7C, - .control_srcomp_west_side = 0x4A002E80, - .control_srcomp_code_latch = 0x4A002E84, - .control_ddr_control_ext_0 = 0x4A002E88, - .control_padconf_core_base = 0x4A003400, - .control_port_emif1_sdram_config = 0x4AE0C110, - .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, - .control_port_emif2_sdram_config = 0x4AE0C118, - .control_emif1_sdram_config_ext = 0x4AE0C144, - .control_emif2_sdram_config_ext = 0x4AE0C148, - .control_wkup_ldovbb_mpu_voltage_ctrl = 0x4AE0C158, - .control_wkup_ldovbb_iva_voltage_ctrl = 0x4A002470, - .control_wkup_ldovbb_eve_voltage_ctrl = 0x4A00246C, - .control_wkup_ldovbb_gpu_voltage_ctrl = 0x4AE0C154, - .control_std_fuse_die_id_0 = 0x4AE0C200, - .control_std_fuse_die_id_1 = 0x4AE0C208, - .control_std_fuse_die_id_2 = 0x4AE0C20C, - .control_std_fuse_die_id_3 = 0x4AE0C210, - .control_padconf_mode = 0x4AE0C5A0, - .control_xtal_oscillator = 0x4AE0C5A4, - .control_i2c_2 = 0x4AE0C5A8, - .control_ckobuffer = 0x4AE0C5AC, - .control_wkup_control_spare_rw = 0x4AE0C5B0, - .control_wkup_control_spare_r = 0x4AE0C5B4, - .control_wkup_control_spare_r_c0 = 0x4AE0C5B8, - .control_srcomp_east_side_wkup = 0x4AE0C5BC, - .control_efuse_1 = 0x4AE0C5C8, - .control_efuse_2 = 0x4AE0C5CC, - .control_efuse_3 = 0x4AE0C5D0, - .control_efuse_4 = 0x4AE0C5D4, - .control_efuse_13 = 0x4AE0C5F0, - .iodelay_config_base = 0x4844A000, -}; - -struct prcm_regs const omap5_es2_prcm = { - /* cm1.ckgen */ - .cm_clksel_core = 0x4a004100, - .cm_clksel_abe = 0x4a004108, - .cm_dll_ctrl = 0x4a004110, - .cm_clkmode_dpll_core = 0x4a004120, - .cm_idlest_dpll_core = 0x4a004124, - .cm_autoidle_dpll_core = 0x4a004128, - .cm_clksel_dpll_core = 0x4a00412c, - .cm_div_m2_dpll_core = 0x4a004130, - .cm_div_m3_dpll_core = 0x4a004134, - .cm_div_h11_dpll_core = 0x4a004138, - .cm_div_h12_dpll_core = 0x4a00413c, - .cm_div_h13_dpll_core = 0x4a004140, - .cm_div_h14_dpll_core = 0x4a004144, - .cm_ssc_deltamstep_dpll_core = 0x4a004148, - .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, - .cm_div_h21_dpll_core = 0x4a004150, - .cm_div_h22_dpllcore = 0x4a004154, - .cm_div_h23_dpll_core = 0x4a004158, - .cm_div_h24_dpll_core = 0x4a00415c, - .cm_clkmode_dpll_mpu = 0x4a004160, - .cm_idlest_dpll_mpu = 0x4a004164, - .cm_autoidle_dpll_mpu = 0x4a004168, - .cm_clksel_dpll_mpu = 0x4a00416c, - .cm_div_m2_dpll_mpu = 0x4a004170, - .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, - .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, - .cm_bypclk_dpll_mpu = 0x4a00419c, - .cm_clkmode_dpll_iva = 0x4a0041a0, - .cm_idlest_dpll_iva = 0x4a0041a4, - .cm_autoidle_dpll_iva = 0x4a0041a8, - .cm_clksel_dpll_iva = 0x4a0041ac, - .cm_div_h11_dpll_iva = 0x4a0041b8, - .cm_div_h12_dpll_iva = 0x4a0041bc, - .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, - .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, - .cm_bypclk_dpll_iva = 0x4a0041dc, - .cm_clkmode_dpll_abe = 0x4a0041e0, - .cm_idlest_dpll_abe = 0x4a0041e4, - .cm_autoidle_dpll_abe = 0x4a0041e8, - .cm_clksel_dpll_abe = 0x4a0041ec, - .cm_div_m2_dpll_abe = 0x4a0041f0, - .cm_div_m3_dpll_abe = 0x4a0041f4, - .cm_ssc_deltamstep_dpll_abe = 0x4a004208, - .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, - .cm_clkmode_dpll_ddrphy = 0x4a004220, - .cm_idlest_dpll_ddrphy = 0x4a004224, - .cm_autoidle_dpll_ddrphy = 0x4a004228, - .cm_clksel_dpll_ddrphy = 0x4a00422c, - .cm_div_m2_dpll_ddrphy = 0x4a004230, - .cm_div_h11_dpll_ddrphy = 0x4a004238, - .cm_div_h12_dpll_ddrphy = 0x4a00423c, - .cm_div_h13_dpll_ddrphy = 0x4a004240, - .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, - .cm_shadow_freq_config1 = 0x4a004260, - .cm_mpu_mpu_clkctrl = 0x4a004320, - - /* cm1.dsp */ - .cm_dsp_clkstctrl = 0x4a004400, - .cm_dsp_dsp_clkctrl = 0x4a004420, - - /* cm1.abe */ - .cm1_abe_clkstctrl = 0x4a004500, - .cm1_abe_l4abe_clkctrl = 0x4a004520, - .cm1_abe_aess_clkctrl = 0x4a004528, - .cm1_abe_pdm_clkctrl = 0x4a004530, - .cm1_abe_dmic_clkctrl = 0x4a004538, - .cm1_abe_mcasp_clkctrl = 0x4a004540, - .cm1_abe_mcbsp1_clkctrl = 0x4a004548, - .cm1_abe_mcbsp2_clkctrl = 0x4a004550, - .cm1_abe_mcbsp3_clkctrl = 0x4a004558, - .cm1_abe_slimbus_clkctrl = 0x4a004560, - .cm1_abe_timer5_clkctrl = 0x4a004568, - .cm1_abe_timer6_clkctrl = 0x4a004570, - .cm1_abe_timer7_clkctrl = 0x4a004578, - .cm1_abe_timer8_clkctrl = 0x4a004580, - .cm1_abe_wdt3_clkctrl = 0x4a004588, - - /* cm2.ckgen */ - .cm_clksel_mpu_m3_iss_root = 0x4a008100, - .cm_clksel_usb_60mhz = 0x4a008104, - .cm_scale_fclk = 0x4a008108, - .cm_core_dvfs_perf1 = 0x4a008110, - .cm_core_dvfs_perf2 = 0x4a008114, - .cm_core_dvfs_perf3 = 0x4a008118, - .cm_core_dvfs_perf4 = 0x4a00811c, - .cm_core_dvfs_current = 0x4a008124, - .cm_iva_dvfs_perf_tesla = 0x4a008128, - .cm_iva_dvfs_perf_ivahd = 0x4a00812c, - .cm_iva_dvfs_perf_abe = 0x4a008130, - .cm_iva_dvfs_current = 0x4a008138, - .cm_clkmode_dpll_per = 0x4a008140, - .cm_idlest_dpll_per = 0x4a008144, - .cm_autoidle_dpll_per = 0x4a008148, - .cm_clksel_dpll_per = 0x4a00814c, - .cm_div_m2_dpll_per = 0x4a008150, - .cm_div_m3_dpll_per = 0x4a008154, - .cm_div_h11_dpll_per = 0x4a008158, - .cm_div_h12_dpll_per = 0x4a00815c, - .cm_div_h13_dpll_per = 0x4a008160, - .cm_div_h14_dpll_per = 0x4a008164, - .cm_ssc_deltamstep_dpll_per = 0x4a008168, - .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, - .cm_emu_override_dpll_per = 0x4a008170, - .cm_clkmode_dpll_usb = 0x4a008180, - .cm_idlest_dpll_usb = 0x4a008184, - .cm_autoidle_dpll_usb = 0x4a008188, - .cm_clksel_dpll_usb = 0x4a00818c, - .cm_div_m2_dpll_usb = 0x4a008190, - .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, - .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, - .cm_clkdcoldo_dpll_usb = 0x4a0081b4, - .cm_clkmode_dpll_unipro = 0x4a0081c0, - .cm_idlest_dpll_unipro = 0x4a0081c4, - .cm_autoidle_dpll_unipro = 0x4a0081c8, - .cm_clksel_dpll_unipro = 0x4a0081cc, - .cm_div_m2_dpll_unipro = 0x4a0081d0, - .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, - .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, - .cm_coreaon_usb_phy1_core_clkctrl = 0x4A008640, - .cm_coreaon_bandgap_clkctrl = 0x4a008648, - .cm_coreaon_io_srcomp_clkctrl = 0x4a008650, - - /* cm2.core */ - .cm_l3_1_clkstctrl = 0x4a008700, - .cm_l3_1_dynamicdep = 0x4a008708, - .cm_l3_1_l3_1_clkctrl = 0x4a008720, - .cm_l3_2_clkstctrl = 0x4a008800, - .cm_l3_2_dynamicdep = 0x4a008808, - .cm_l3_2_l3_2_clkctrl = 0x4a008820, - .cm_l3_gpmc_clkctrl = 0x4a008828, - .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, - .cm_mpu_m3_clkstctrl = 0x4a008900, - .cm_mpu_m3_staticdep = 0x4a008904, - .cm_mpu_m3_dynamicdep = 0x4a008908, - .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, - .cm_sdma_clkstctrl = 0x4a008a00, - .cm_sdma_staticdep = 0x4a008a04, - .cm_sdma_dynamicdep = 0x4a008a08, - .cm_sdma_sdma_clkctrl = 0x4a008a20, - .cm_memif_clkstctrl = 0x4a008b00, - .cm_memif_dmm_clkctrl = 0x4a008b20, - .cm_memif_emif_fw_clkctrl = 0x4a008b28, - .cm_memif_emif_1_clkctrl = 0x4a008b30, - .cm_memif_emif_2_clkctrl = 0x4a008b38, - .cm_memif_dll_clkctrl = 0x4a008b40, - .cm_memif_emif_h1_clkctrl = 0x4a008b50, - .cm_memif_emif_h2_clkctrl = 0x4a008b58, - .cm_memif_dll_h_clkctrl = 0x4a008b60, - .cm_c2c_clkstctrl = 0x4a008c00, - .cm_c2c_staticdep = 0x4a008c04, - .cm_c2c_dynamicdep = 0x4a008c08, - .cm_c2c_sad2d_clkctrl = 0x4a008c20, - .cm_c2c_modem_icr_clkctrl = 0x4a008c28, - .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, - .cm_l4cfg_clkstctrl = 0x4a008d00, - .cm_l4cfg_dynamicdep = 0x4a008d08, - .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, - .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, - .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, - .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, - .cm_l3instr_clkstctrl = 0x4a008e00, - .cm_l3instr_l3_3_clkctrl = 0x4a008e20, - .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, - .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, - .cm_l4per_clkstctrl = 0x4a009000, - .cm_l4per_dynamicdep = 0x4a009008, - .cm_l4per_adc_clkctrl = 0x4a009020, - .cm_l4per_gptimer10_clkctrl = 0x4a009028, - .cm_l4per_gptimer11_clkctrl = 0x4a009030, - .cm_l4per_gptimer2_clkctrl = 0x4a009038, - .cm_l4per_gptimer3_clkctrl = 0x4a009040, - .cm_l4per_gptimer4_clkctrl = 0x4a009048, - .cm_l4per_gptimer9_clkctrl = 0x4a009050, - .cm_l4per_elm_clkctrl = 0x4a009058, - .cm_l4per_gpio2_clkctrl = 0x4a009060, - .cm_l4per_gpio3_clkctrl = 0x4a009068, - .cm_l4per_gpio4_clkctrl = 0x4a009070, - .cm_l4per_gpio5_clkctrl = 0x4a009078, - .cm_l4per_gpio6_clkctrl = 0x4a009080, - .cm_l4per_hdq1w_clkctrl = 0x4a009088, - .cm_l4per_hecc1_clkctrl = 0x4a009090, - .cm_l4per_hecc2_clkctrl = 0x4a009098, - .cm_l4per_i2c1_clkctrl = 0x4a0090a0, - .cm_l4per_i2c2_clkctrl = 0x4a0090a8, - .cm_l4per_i2c3_clkctrl = 0x4a0090b0, - .cm_l4per_i2c4_clkctrl = 0x4a0090b8, - .cm_l4per_l4per_clkctrl = 0x4a0090c0, - .cm_l4per_mcasp2_clkctrl = 0x4a0090d0, - .cm_l4per_mcasp3_clkctrl = 0x4a0090d8, - .cm_l4per_mgate_clkctrl = 0x4a0090e8, - .cm_l4per_mcspi1_clkctrl = 0x4a0090f0, - .cm_l4per_mcspi2_clkctrl = 0x4a0090f8, - .cm_l4per_mcspi3_clkctrl = 0x4a009100, - .cm_l4per_mcspi4_clkctrl = 0x4a009108, - .cm_l4per_gpio7_clkctrl = 0x4a009110, - .cm_l4per_gpio8_clkctrl = 0x4a009118, - .cm_l4per_mmcsd3_clkctrl = 0x4a009120, - .cm_l4per_mmcsd4_clkctrl = 0x4a009128, - .cm_l4per_msprohg_clkctrl = 0x4a009130, - .cm_l4per_slimbus2_clkctrl = 0x4a009138, - .cm_l4per_uart1_clkctrl = 0x4a009140, - .cm_l4per_uart2_clkctrl = 0x4a009148, - .cm_l4per_uart3_clkctrl = 0x4a009150, - .cm_l4per_uart4_clkctrl = 0x4a009158, - .cm_l4per_mmcsd5_clkctrl = 0x4a009160, - .cm_l4per_i2c5_clkctrl = 0x4a009168, - .cm_l4per_uart5_clkctrl = 0x4a009170, - .cm_l4per_uart6_clkctrl = 0x4a009178, - .cm_l4sec_clkstctrl = 0x4a009180, - .cm_l4sec_staticdep = 0x4a009184, - .cm_l4sec_dynamicdep = 0x4a009188, - .cm_l4sec_aes1_clkctrl = 0x4a0091a0, - .cm_l4sec_aes2_clkctrl = 0x4a0091a8, - .cm_l4sec_des3des_clkctrl = 0x4a0091b0, - .cm_l4sec_pkaeip29_clkctrl = 0x4a0091b8, - .cm_l4sec_rng_clkctrl = 0x4a0091c0, - .cm_l4sec_sha2md51_clkctrl = 0x4a0091c8, - .cm_l4sec_cryptodma_clkctrl = 0x4a0091d8, - - /* cm2.ivahd */ - .cm_ivahd_clkstctrl = 0x4a009200, - .cm_ivahd_ivahd_clkctrl = 0x4a009220, - .cm_ivahd_sl2_clkctrl = 0x4a009228, - - /* cm2.cam */ - .cm_cam_clkstctrl = 0x4a009300, - .cm_cam_iss_clkctrl = 0x4a009320, - .cm_cam_fdif_clkctrl = 0x4a009328, - - /* cm2.dss */ - .cm_dss_clkstctrl = 0x4a009400, - .cm_dss_dss_clkctrl = 0x4a009420, - - /* cm2.sgx */ - .cm_sgx_clkstctrl = 0x4a009500, - .cm_sgx_sgx_clkctrl = 0x4a009520, - - /* cm2.l3init */ - .cm_l3init_clkstctrl = 0x4a009600, - - /* cm2.l3init */ - .cm_l3init_hsmmc1_clkctrl = 0x4a009628, - .cm_l3init_hsmmc2_clkctrl = 0x4a009630, - .cm_l3init_hsi_clkctrl = 0x4a009638, - .cm_l3init_hsusbhost_clkctrl = 0x4a009658, - .cm_l3init_hsusbotg_clkctrl = 0x4a009660, - .cm_l3init_hsusbtll_clkctrl = 0x4a009668, - .cm_l3init_p1500_clkctrl = 0x4a009678, - .cm_l3init_sata_clkctrl = 0x4a009688, - .cm_l3init_fsusb_clkctrl = 0x4a0096d0, - .cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0, - .cm_l3init_ocp2scp3_clkctrl = 0x4a0096e8, - .cm_l3init_usb_otg_ss1_clkctrl = 0x4a0096f0, - - /* prm irqstatus regs */ - .prm_irqstatus_mpu = 0x4ae06010, - .prm_irqstatus_mpu_2 = 0x4ae06014, - - /* l4 wkup regs */ - .cm_abe_pll_ref_clksel = 0x4ae0610c, - .cm_sys_clksel = 0x4ae06110, - .cm_wkup_clkstctrl = 0x4ae07900, - .cm_wkup_l4wkup_clkctrl = 0x4ae07920, - .cm_wkup_wdtimer1_clkctrl = 0x4ae07928, - .cm_wkup_wdtimer2_clkctrl = 0x4ae07930, - .cm_wkup_gpio1_clkctrl = 0x4ae07938, - .cm_wkup_gptimer1_clkctrl = 0x4ae07940, - .cm_wkup_gptimer12_clkctrl = 0x4ae07948, - .cm_wkup_synctimer_clkctrl = 0x4ae07950, - .cm_wkup_usim_clkctrl = 0x4ae07958, - .cm_wkup_sarram_clkctrl = 0x4ae07960, - .cm_wkup_keyboard_clkctrl = 0x4ae07978, - .cm_wkup_rtc_clkctrl = 0x4ae07980, - .cm_wkup_bandgap_clkctrl = 0x4ae07988, - .cm_wkupaon_scrm_clkctrl = 0x4ae07990, - .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07998, - .prm_rstctrl = 0x4ae07c00, - .prm_rstst = 0x4ae07c04, - .prm_rsttime = 0x4ae07c08, - .prm_vc_val_bypass = 0x4ae07ca0, - .prm_vc_cfg_i2c_mode = 0x4ae07cb4, - .prm_vc_cfg_i2c_clk = 0x4ae07cb8, - - .prm_abbldo_mpu_setup = 0x4ae07cdc, - .prm_abbldo_mpu_ctrl = 0x4ae07ce0, - .prm_abbldo_mm_setup = 0x4ae07ce4, - .prm_abbldo_mm_ctrl = 0x4ae07ce8, - - /* SCRM stuff, used by some boards */ - .scrm_auxclk0 = 0x4ae0a310, - .scrm_auxclk1 = 0x4ae0a314, -}; - -struct prcm_regs const dra7xx_prcm = { - /* cm1.ckgen */ - .cm_clksel_core = 0x4a005100, - .cm_clksel_abe = 0x4a005108, - .cm_dll_ctrl = 0x4a005110, - .cm_clkmode_dpll_core = 0x4a005120, - .cm_idlest_dpll_core = 0x4a005124, - .cm_autoidle_dpll_core = 0x4a005128, - .cm_clksel_dpll_core = 0x4a00512c, - .cm_div_m2_dpll_core = 0x4a005130, - .cm_div_m3_dpll_core = 0x4a005134, - .cm_div_h11_dpll_core = 0x4a005138, - .cm_div_h12_dpll_core = 0x4a00513c, - .cm_div_h13_dpll_core = 0x4a005140, - .cm_div_h14_dpll_core = 0x4a005144, - .cm_ssc_deltamstep_dpll_core = 0x4a005148, - .cm_ssc_modfreqdiv_dpll_core = 0x4a00514c, - .cm_div_h21_dpll_core = 0x4a005150, - .cm_div_h22_dpllcore = 0x4a005154, - .cm_div_h23_dpll_core = 0x4a005158, - .cm_div_h24_dpll_core = 0x4a00515c, - .cm_clkmode_dpll_mpu = 0x4a005160, - .cm_idlest_dpll_mpu = 0x4a005164, - .cm_autoidle_dpll_mpu = 0x4a005168, - .cm_clksel_dpll_mpu = 0x4a00516c, - .cm_div_m2_dpll_mpu = 0x4a005170, - .cm_ssc_deltamstep_dpll_mpu = 0x4a005188, - .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00518c, - .cm_bypclk_dpll_mpu = 0x4a00519c, - .cm_clkmode_dpll_iva = 0x4a0051a0, - .cm_idlest_dpll_iva = 0x4a0051a4, - .cm_autoidle_dpll_iva = 0x4a0051a8, - .cm_clksel_dpll_iva = 0x4a0051ac, - .cm_ssc_deltamstep_dpll_iva = 0x4a0051c8, - .cm_ssc_modfreqdiv_dpll_iva = 0x4a0051cc, - .cm_bypclk_dpll_iva = 0x4a0051dc, - .cm_clkmode_dpll_abe = 0x4a0051e0, - .cm_idlest_dpll_abe = 0x4a0051e4, - .cm_autoidle_dpll_abe = 0x4a0051e8, - .cm_clksel_dpll_abe = 0x4a0051ec, - .cm_div_m2_dpll_abe = 0x4a0051f0, - .cm_div_m3_dpll_abe = 0x4a0051f4, - .cm_ssc_deltamstep_dpll_abe = 0x4a005208, - .cm_ssc_modfreqdiv_dpll_abe = 0x4a00520c, - .cm_clkmode_dpll_ddrphy = 0x4a005210, - .cm_idlest_dpll_ddrphy = 0x4a005214, - .cm_autoidle_dpll_ddrphy = 0x4a005218, - .cm_clksel_dpll_ddrphy = 0x4a00521c, - .cm_div_m2_dpll_ddrphy = 0x4a005220, - .cm_div_h11_dpll_ddrphy = 0x4a005228, - .cm_ssc_deltamstep_dpll_ddrphy = 0x4a00522c, - .cm_clkmode_dpll_dsp = 0x4a005234, - .cm_shadow_freq_config1 = 0x4a005260, - .cm_clkmode_dpll_gmac = 0x4a0052a8, - .cm_coreaon_usb_phy1_core_clkctrl = 0x4a008640, - .cm_coreaon_usb_phy2_core_clkctrl = 0x4a008688, - .cm_coreaon_usb_phy3_core_clkctrl = 0x4a008698, - .cm_coreaon_l3init_60m_gfclk_clkctrl = 0x4a0086c0, - - /* cm1.mpu */ - .cm_mpu_mpu_clkctrl = 0x4a005320, - - /* cm1.dsp */ - .cm_dsp_clkstctrl = 0x4a005400, - .cm_dsp_dsp_clkctrl = 0x4a005420, - - /* cm IPU */ - .cm_ipu_clkstctrl = 0x4a005540, - .cm_ipu_i2c5_clkctrl = 0x4a005578, - - /* prm irqstatus regs */ - .prm_irqstatus_mpu = 0x4ae06010, - .prm_irqstatus_mpu_2 = 0x4ae06014, - - /* cm2.ckgen */ - .cm_clksel_usb_60mhz = 0x4a008104, - .cm_clkmode_dpll_per = 0x4a008140, - .cm_idlest_dpll_per = 0x4a008144, - .cm_autoidle_dpll_per = 0x4a008148, - .cm_clksel_dpll_per = 0x4a00814c, - .cm_div_m2_dpll_per = 0x4a008150, - .cm_div_m3_dpll_per = 0x4a008154, - .cm_div_h11_dpll_per = 0x4a008158, - .cm_div_h12_dpll_per = 0x4a00815c, - .cm_div_h13_dpll_per = 0x4a008160, - .cm_div_h14_dpll_per = 0x4a008164, - .cm_ssc_deltamstep_dpll_per = 0x4a008168, - .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, - .cm_clkmode_dpll_usb = 0x4a008180, - .cm_idlest_dpll_usb = 0x4a008184, - .cm_autoidle_dpll_usb = 0x4a008188, - .cm_clksel_dpll_usb = 0x4a00818c, - .cm_div_m2_dpll_usb = 0x4a008190, - .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, - .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, - .cm_clkdcoldo_dpll_usb = 0x4a0081b4, - .cm_clkmode_dpll_pcie_ref = 0x4a008200, - .cm_clkmode_apll_pcie = 0x4a00821c, - .cm_idlest_apll_pcie = 0x4a008220, - .cm_div_m2_apll_pcie = 0x4a008224, - .cm_clkvcoldo_apll_pcie = 0x4a008228, - - /* cm2.core */ - .cm_l3_1_clkstctrl = 0x4a008700, - .cm_l3_1_dynamicdep = 0x4a008708, - .cm_l3_1_l3_1_clkctrl = 0x4a008720, - .cm_l3_gpmc_clkctrl = 0x4a008728, - .cm_mpu_m3_clkstctrl = 0x4a008900, - .cm_mpu_m3_staticdep = 0x4a008904, - .cm_mpu_m3_dynamicdep = 0x4a008908, - .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, - .cm_sdma_clkstctrl = 0x4a008a00, - .cm_sdma_staticdep = 0x4a008a04, - .cm_sdma_dynamicdep = 0x4a008a08, - .cm_sdma_sdma_clkctrl = 0x4a008a20, - .cm_memif_clkstctrl = 0x4a008b00, - .cm_memif_dmm_clkctrl = 0x4a008b20, - .cm_memif_emif_fw_clkctrl = 0x4a008b28, - .cm_memif_emif_1_clkctrl = 0x4a008b30, - .cm_memif_emif_2_clkctrl = 0x4a008b38, - .cm_memif_dll_clkctrl = 0x4a008b40, - .cm_l4cfg_clkstctrl = 0x4a008d00, - .cm_l4cfg_dynamicdep = 0x4a008d08, - .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, - .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, - .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, - .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, - .cm_l3instr_clkstctrl = 0x4a008e00, - .cm_l3instr_l3_3_clkctrl = 0x4a008e20, - .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, - .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, - - /* cm2.ivahd */ - .cm_ivahd_clkstctrl = 0x4a008f00, - .cm_ivahd_ivahd_clkctrl = 0x4a008f20, - .cm_ivahd_sl2_clkctrl = 0x4a008f28, - - /* cm2.cam */ - .cm_cam_clkstctrl = 0x4a009000, - .cm_cam_vip1_clkctrl = 0x4a009020, - .cm_cam_vip2_clkctrl = 0x4a009028, - .cm_cam_vip3_clkctrl = 0x4a009030, - .cm_cam_lvdsrx_clkctrl = 0x4a009038, - .cm_cam_csi1_clkctrl = 0x4a009040, - .cm_cam_csi2_clkctrl = 0x4a009048, - - /* cm2.dss */ - .cm_dss_clkstctrl = 0x4a009100, - .cm_dss_dss_clkctrl = 0x4a009120, - - /* cm2.sgx */ - .cm_sgx_clkstctrl = 0x4a009200, - .cm_sgx_sgx_clkctrl = 0x4a009220, - - /* cm2.l3init */ - .cm_l3init_clkstctrl = 0x4a009300, - - /* cm2.l3init */ - .cm_l3init_hsmmc1_clkctrl = 0x4a009328, - .cm_l3init_hsmmc2_clkctrl = 0x4a009330, - .cm_l3init_hsusbhost_clkctrl = 0x4a009340, - .cm_l3init_hsusbotg_clkctrl = 0x4a009348, - .cm_l3init_hsusbtll_clkctrl = 0x4a009350, - .cm_l3init_sata_clkctrl = 0x4a009388, - .cm_gmac_clkstctrl = 0x4a0093c0, - .cm_gmac_gmac_clkctrl = 0x4a0093d0, - .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0, - .cm_l3init_ocp2scp3_clkctrl = 0x4a0093e8, - .cm_l3init_usb_otg_ss1_clkctrl = 0x4a0093f0, - .cm_l3init_usb_otg_ss2_clkctrl = 0x4a009340, - - /* cm2.l4per */ - .cm_l4per_clkstctrl = 0x4a009700, - .cm_l4per_dynamicdep = 0x4a009708, - .cm_l4per_gptimer10_clkctrl = 0x4a009728, - .cm_l4per_gptimer11_clkctrl = 0x4a009730, - .cm_l4per_gptimer2_clkctrl = 0x4a009738, - .cm_l4per_gptimer3_clkctrl = 0x4a009740, - .cm_l4per_gptimer4_clkctrl = 0x4a009748, - .cm_l4per_gptimer9_clkctrl = 0x4a009750, - .cm_l4per_elm_clkctrl = 0x4a009758, - .cm_l4per_gpio2_clkctrl = 0x4a009760, - .cm_l4per_gpio3_clkctrl = 0x4a009768, - .cm_l4per_gpio4_clkctrl = 0x4a009770, - .cm_l4per_gpio5_clkctrl = 0x4a009778, - .cm_l4per_gpio6_clkctrl = 0x4a009780, - .cm_l4per_hdq1w_clkctrl = 0x4a009788, - .cm_l4per_i2c1_clkctrl = 0x4a0097a0, - .cm_l4per_i2c2_clkctrl = 0x4a0097a8, - .cm_l4per_i2c3_clkctrl = 0x4a0097b0, - .cm_l4per_i2c4_clkctrl = 0x4a0097b8, - .cm_l4per_l4per_clkctrl = 0x4a0097c0, - .cm_l4per_mcspi1_clkctrl = 0x4a0097f0, - .cm_l4per_mcspi2_clkctrl = 0x4a0097f8, - .cm_l4per_mcspi3_clkctrl = 0x4a009800, - .cm_l4per_mcspi4_clkctrl = 0x4a009808, - .cm_l4per_gpio7_clkctrl = 0x4a009810, - .cm_l4per_gpio8_clkctrl = 0x4a009818, - .cm_l4per_mmcsd3_clkctrl = 0x4a009820, - .cm_l4per_mmcsd4_clkctrl = 0x4a009828, - .cm_l4per_qspi_clkctrl = 0x4a009838, - .cm_l4per_uart1_clkctrl = 0x4a009840, - .cm_l4per_uart2_clkctrl = 0x4a009848, - .cm_l4per_uart3_clkctrl = 0x4a009850, - .cm_l4per_uart4_clkctrl = 0x4a009858, - .cm_l4per_uart5_clkctrl = 0x4a009870, - .cm_l4sec_clkstctrl = 0x4a009880, - .cm_l4sec_staticdep = 0x4a009884, - .cm_l4sec_dynamicdep = 0x4a009888, - .cm_l4sec_aes1_clkctrl = 0x4a0098a0, - .cm_l4sec_aes2_clkctrl = 0x4a0098a8, - .cm_l4sec_des3des_clkctrl = 0x4a0098b0, - .cm_l4sec_rng_clkctrl = 0x4a0098c0, - .cm_l4sec_sha2md51_clkctrl = 0x4a0098c8, - .cm_l4sec_cryptodma_clkctrl = 0x4a0098d8, - - /* l4 wkup regs */ - .cm_abe_pll_ref_clksel = 0x4ae0610c, - .cm_sys_clksel = 0x4ae06110, - .cm_abe_pll_sys_clksel = 0x4ae06118, - .cm_wkup_clkstctrl = 0x4ae07800, - .cm_wkup_l4wkup_clkctrl = 0x4ae07820, - .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, - .cm_wkup_wdtimer2_clkctrl = 0x4ae07830, - .cm_wkup_gpio1_clkctrl = 0x4ae07838, - .cm_wkup_gptimer1_clkctrl = 0x4ae07840, - .cm_wkup_gptimer12_clkctrl = 0x4ae07848, - .cm_wkup_sarram_clkctrl = 0x4ae07860, - .cm_wkup_keyboard_clkctrl = 0x4ae07878, - .cm_wkupaon_scrm_clkctrl = 0x4ae07890, - .prm_rstctrl = 0x4ae07d00, - .prm_rstst = 0x4ae07d04, - .prm_rsttime = 0x4ae07d08, - .prm_io_pmctrl = 0x4ae07d20, - .prm_vc_val_bypass = 0x4ae07da0, - .prm_vc_cfg_i2c_mode = 0x4ae07db4, - .prm_vc_cfg_i2c_clk = 0x4ae07db8, - - .prm_abbldo_mpu_setup = 0x4AE07DDC, - .prm_abbldo_mpu_ctrl = 0x4AE07DE0, - .prm_abbldo_iva_setup = 0x4AE07E34, - .prm_abbldo_iva_ctrl = 0x4AE07E24, - .prm_abbldo_eve_setup = 0x4AE07E30, - .prm_abbldo_eve_ctrl = 0x4AE07E20, - .prm_abbldo_gpu_setup = 0x4AE07DE4, - .prm_abbldo_gpu_ctrl = 0x4AE07DE8, - - /*l3main1 edma*/ - .cm_l3main1_tptc1_clkctrl = 0x4a008778, - .cm_l3main1_tptc2_clkctrl = 0x4a008780, -}; - -void clrset_spare_register(u8 spare_type, u32 clear_bits, u32 set_bits) -{ - u32 reg = spare_type ? (*ctrl)->ctrl_core_sma_sw_1 : - (*ctrl)->ctrl_core_sma_sw_0; - clrsetbits_le32(reg, clear_bits, set_bits); -} diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c deleted file mode 100644 index 7712923..0000000 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ /dev/null @@ -1,742 +0,0 @@ -/* - * Timing and Organization details of the ddr device parts used in OMAP5 - * EVM - * - * (C) Copyright 2010 - * Texas Instruments, - * - * Aneesh V - * Sricharan R - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -/* - * This file provides details of the LPDDR2 SDRAM parts used on OMAP5 - * EVM. Since the parts used and geometry are identical for - * evm for a given OMAP5 revision, this information is kept - * here instead of being in board directory. However the key functions - * exported are weakly linked so that they can be over-ridden in the board - * directory if there is a OMAP5 board in the future that uses a different - * memory device or geometry. - * - * For any new board with different memory devices over-ride one or more - * of the following functions as per the CONFIG flags you intend to enable: - * - emif_get_reg_dump() - * - emif_get_dmm_regs() - * - emif_get_device_details() - * - emif_get_device_timings() - */ - -#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -const struct emif_regs emif_regs_532_mhz_2cs = { - .sdram_config_init = 0x80800EBA, - .sdram_config = 0x808022BA, - .ref_ctrl = 0x0000081A, - .sdram_tim1 = 0x772F6873, - .sdram_tim2 = 0x304a129a, - .sdram_tim3 = 0x02f7e45f, - .read_idle_ctrl = 0x00050000, - .zq_config = 0x000b3215, - .temp_alert_config = 0x08000a05, - .emif_ddr_phy_ctlr_1_init = 0x0E28420d, - .emif_ddr_phy_ctlr_1 = 0x0E28420d, - .emif_ddr_ext_phy_ctrl_1 = 0x04020080, - .emif_ddr_ext_phy_ctrl_2 = 0x28C518A3, - .emif_ddr_ext_phy_ctrl_3 = 0x518A3146, - .emif_ddr_ext_phy_ctrl_4 = 0x0014628C, - .emif_ddr_ext_phy_ctrl_5 = 0x04010040 -}; - -const struct emif_regs emif_regs_532_mhz_2cs_es2 = { - .sdram_config_init = 0x80800EBA, - .sdram_config = 0x808022BA, - .ref_ctrl = 0x0000081A, - .sdram_tim1 = 0x772F6873, - .sdram_tim2 = 0x304a129a, - .sdram_tim3 = 0x02f7e45f, - .read_idle_ctrl = 0x00050000, - .zq_config = 0x100b3215, - .temp_alert_config = 0x08000a05, - .emif_ddr_phy_ctlr_1_init = 0x0E30400d, - .emif_ddr_phy_ctlr_1 = 0x0E30400d, - .emif_ddr_ext_phy_ctrl_1 = 0x04020080, - .emif_ddr_ext_phy_ctrl_2 = 0x28C518A3, - .emif_ddr_ext_phy_ctrl_3 = 0x518A3146, - .emif_ddr_ext_phy_ctrl_4 = 0x0014628C, - .emif_ddr_ext_phy_ctrl_5 = 0xC330CC33, -}; - -const struct emif_regs emif_regs_266_mhz_2cs = { - .sdram_config_init = 0x80800EBA, - .sdram_config = 0x808022BA, - .ref_ctrl = 0x0000040D, - .sdram_tim1 = 0x2A86B419, - .sdram_tim2 = 0x1025094A, - .sdram_tim3 = 0x026BA22F, - .read_idle_ctrl = 0x00050000, - .zq_config = 0x000b3215, - .temp_alert_config = 0x08000a05, - .emif_ddr_phy_ctlr_1_init = 0x0E28420d, - .emif_ddr_phy_ctlr_1 = 0x0E28420d, - .emif_ddr_ext_phy_ctrl_1 = 0x04020080, - .emif_ddr_ext_phy_ctrl_2 = 0x0A414829, - .emif_ddr_ext_phy_ctrl_3 = 0x14829052, - .emif_ddr_ext_phy_ctrl_4 = 0x000520A4, - .emif_ddr_ext_phy_ctrl_5 = 0x04010040 -}; - -const struct emif_regs emif_regs_ddr3_532_mhz_1cs = { - .sdram_config_init = 0x61851B32, - .sdram_config = 0x61851B32, - .sdram_config2 = 0x0, - .ref_ctrl = 0x00001035, - .sdram_tim1 = 0xCCCF36B3, - .sdram_tim2 = 0x308F7FDA, - .sdram_tim3 = 0x027F88A8, - .read_idle_ctrl = 0x00050000, - .zq_config = 0x0007190B, - .temp_alert_config = 0x00000000, - .emif_ddr_phy_ctlr_1_init = 0x0020420A, - .emif_ddr_phy_ctlr_1 = 0x0024420A, - .emif_ddr_ext_phy_ctrl_1 = 0x04040100, - .emif_ddr_ext_phy_ctrl_2 = 0x00000000, - .emif_ddr_ext_phy_ctrl_3 = 0x00000000, - .emif_ddr_ext_phy_ctrl_4 = 0x00000000, - .emif_ddr_ext_phy_ctrl_5 = 0x04010040, - .emif_rd_wr_lvl_rmp_win = 0x00000000, - .emif_rd_wr_lvl_rmp_ctl = 0x80000000, - .emif_rd_wr_lvl_ctl = 0x00000000, - .emif_rd_wr_exec_thresh = 0x00000305 -}; - -const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = { - .sdram_config_init = 0x61851B32, - .sdram_config = 0x61851B32, - .sdram_config2 = 0x0, - .ref_ctrl = 0x00001035, - .sdram_tim1 = 0xCCCF36B3, - .sdram_tim2 = 0x308F7FDA, - .sdram_tim3 = 0x027F88A8, - .read_idle_ctrl = 0x00050000, - .zq_config = 0x1007190B, - .temp_alert_config = 0x00000000, - .emif_ddr_phy_ctlr_1_init = 0x0030400A, - .emif_ddr_phy_ctlr_1 = 0x0034400A, - .emif_ddr_ext_phy_ctrl_1 = 0x04040100, - .emif_ddr_ext_phy_ctrl_2 = 0x00000000, - .emif_ddr_ext_phy_ctrl_3 = 0x00000000, - .emif_ddr_ext_phy_ctrl_4 = 0x00000000, - .emif_ddr_ext_phy_ctrl_5 = 0x4350D435, - .emif_rd_wr_lvl_rmp_win = 0x00000000, - .emif_rd_wr_lvl_rmp_ctl = 0x80000000, - .emif_rd_wr_lvl_ctl = 0x00000000, - .emif_rd_wr_exec_thresh = 0x40000305 -}; - -const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = { - .dmm_lisa_map_0 = 0x0, - .dmm_lisa_map_1 = 0x0, - .dmm_lisa_map_2 = 0x80740300, - .dmm_lisa_map_3 = 0xFF020100, - .is_ma_present = 0x1 -}; - -static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) -{ - switch (omap_revision()) { - case OMAP5430_ES1_0: - *regs = &emif_regs_532_mhz_2cs; - break; - case OMAP5432_ES1_0: - *regs = &emif_regs_ddr3_532_mhz_1cs; - break; - case OMAP5430_ES2_0: - *regs = &emif_regs_532_mhz_2cs_es2; - break; - case OMAP5432_ES2_0: - default: - *regs = &emif_regs_ddr3_532_mhz_1cs_es2; - break; - } -} - -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) - __attribute__((weak, alias("emif_get_reg_dump_sdp"))); - -static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs - **dmm_lisa_regs) -{ - switch (omap_revision()) { - case OMAP5430_ES1_0: - case OMAP5430_ES2_0: - case OMAP5432_ES1_0: - case OMAP5432_ES2_0: - default: - *dmm_lisa_regs = &lisa_map_4G_x_2_x_2; - break; - } - -} - -void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) - __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); -#else - -static const struct lpddr2_device_details dev_4G_S4_details = { - .type = LPDDR2_TYPE_S4, - .density = LPDDR2_DENSITY_4Gb, - .io_width = LPDDR2_IO_WIDTH_32, - .manufacturer = LPDDR2_MANUFACTURER_SAMSUNG -}; - -static void emif_get_device_details_sdp(u32 emif_nr, - struct lpddr2_device_details *cs0_device_details, - struct lpddr2_device_details *cs1_device_details) -{ - /* EMIF1 & EMIF2 have identical configuration */ - *cs0_device_details = dev_4G_S4_details; - *cs1_device_details = dev_4G_S4_details; -} - -void emif_get_device_details(u32 emif_nr, - struct lpddr2_device_details *cs0_device_details, - struct lpddr2_device_details *cs1_device_details) - __attribute__((weak, alias("emif_get_device_details_sdp"))); - -#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ - -const u32 ext_phy_ctrl_const_base[] = { - 0x01004010, - 0x00001004, - 0x04010040, - 0x01004010, - 0x00001004, - 0x00000000, - 0x00000000, - 0x00000000, - 0x80080080, - 0x00800800, - 0x08102040, - 0x00000001, - 0x540A8150, - 0xA81502a0, - 0x002A0540, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000077, - 0x0 -}; - -const u32 ddr3_ext_phy_ctrl_const_base_es1[] = { - 0x01004010, - 0x00001004, - 0x04010040, - 0x01004010, - 0x00001004, - 0x00000000, - 0x00000000, - 0x00000000, - 0x80080080, - 0x00800800, - 0x08102040, - 0x00000002, - 0x0, - 0x0, - 0x0, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000057, - 0x0 -}; - -const u32 ddr3_ext_phy_ctrl_const_base_es2[] = { - 0x50D4350D, - 0x00000D43, - 0x04010040, - 0x01004010, - 0x00001004, - 0x00000000, - 0x00000000, - 0x00000000, - 0x80080080, - 0x00800800, - 0x08102040, - 0x00000002, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000057, - 0x0 -}; - -/* Ext phy ctrl 1-35 regs */ -const u32 -dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = { - 0x10040100, - 0x00910091, - 0x00950095, - 0x009B009B, - 0x009E009E, - 0x00980098, - 0x00340034, - 0x00350035, - 0x00340034, - 0x00310031, - 0x00340034, - 0x007F007F, - 0x007F007F, - 0x007F007F, - 0x007F007F, - 0x007F007F, - 0x00480048, - 0x004A004A, - 0x00520052, - 0x00550055, - 0x00500050, - 0x00000000, - 0x00600020, - 0x40011080, - 0x08102040, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0 -}; - -/* Ext phy ctrl 1-35 regs */ -const u32 -dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = { - 0x10040100, - 0x00910091, - 0x00950095, - 0x009B009B, - 0x009E009E, - 0x00980098, - 0x00330033, - 0x00330033, - 0x002F002F, - 0x00320032, - 0x00310031, - 0x007F007F, - 0x007F007F, - 0x007F007F, - 0x007F007F, - 0x007F007F, - 0x00520052, - 0x00520052, - 0x00470047, - 0x00490049, - 0x00500050, - 0x00000000, - 0x00600020, - 0x40011080, - 0x08102040, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0 -}; - -/* Ext phy ctrl 1-35 regs */ -const u32 -dra_ddr3_ext_phy_ctrl_const_base_666MHz[] = { - 0x10040100, - 0x00A400A4, - 0x00A900A9, - 0x00B000B0, - 0x00B000B0, - 0x00A400A4, - 0x00390039, - 0x00320032, - 0x00320032, - 0x00320032, - 0x00440044, - 0x00550055, - 0x00550055, - 0x00550055, - 0x00550055, - 0x007F007F, - 0x004D004D, - 0x00430043, - 0x00560056, - 0x00540054, - 0x00600060, - 0x0, - 0x00600020, - 0x40010080, - 0x08102040, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0 -}; - -const u32 dra_ddr3_ext_phy_ctrl_const_base_666MHz_es2[] = { - 0x04040100, - 0x006B009F, - 0x006B00A2, - 0x006B00A8, - 0x006B00A8, - 0x006B00B2, - 0x002F002F, - 0x002F002F, - 0x002F002F, - 0x002F002F, - 0x002F002F, - 0x00600073, - 0x00600071, - 0x0060007C, - 0x0060007E, - 0x00600084, - 0x00400053, - 0x00400051, - 0x0040005C, - 0x0040005E, - 0x00400064, - 0x00800080, - 0x00800080, - 0x40010080, - 0x08102040, - 0x005B008F, - 0x005B0092, - 0x005B0098, - 0x005B0098, - 0x005B00A2, - 0x00300043, - 0x00300041, - 0x0030004C, - 0x0030004E, - 0x00300054, - 0x00000077 -}; - -const struct lpddr2_mr_regs mr_regs = { - .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8, - .mr2 = 0x6, - .mr3 = 0x1, - .mr10 = MR10_ZQ_ZQINIT, - .mr16 = MR16_REF_FULL_ARRAY -}; - -void __weak emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, - const u32 **regs, - u32 *size) -{ - switch (omap_revision()) { - case OMAP5430_ES1_0: - case OMAP5430_ES2_0: - *regs = ext_phy_ctrl_const_base; - *size = ARRAY_SIZE(ext_phy_ctrl_const_base); - break; - case OMAP5432_ES1_0: - *regs = ddr3_ext_phy_ctrl_const_base_es1; - *size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es1); - break; - case OMAP5432_ES2_0: - *regs = ddr3_ext_phy_ctrl_const_base_es2; - *size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2); - break; - case DRA752_ES1_0: - case DRA752_ES1_1: - case DRA752_ES2_0: - if (emif_nr == 1) { - *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1; - *size = - ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif1); - } else { - *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2; - *size = - ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif2); - } - break; - case DRA722_ES1_0: - *regs = dra_ddr3_ext_phy_ctrl_const_base_666MHz; - *size = ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_666MHz); - break; - case DRA722_ES2_0: - *regs = dra_ddr3_ext_phy_ctrl_const_base_666MHz_es2; - *size = ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_666MHz_es2); - break; - default: - *regs = ddr3_ext_phy_ctrl_const_base_es2; - *size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2); - - } -} - -void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) -{ - *regs = &mr_regs; -} - -static void do_ext_phy_settings_omap5(u32 base, const struct emif_regs *regs) -{ - u32 *ext_phy_ctrl_base = 0; - u32 *emif_ext_phy_ctrl_base = 0; - u32 emif_nr; - const u32 *ext_phy_ctrl_const_regs; - u32 i = 0; - u32 size; - - emif_nr = (base == EMIF1_BASE) ? 1 : 2; - - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1); - emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1); - - /* Configure external phy control timing registers */ - for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) { - writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++); - /* Update shadow registers */ - writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++); - } - - /* - * external phy 6-24 registers do not change with - * ddr frequency - */ - emif_get_ext_phy_ctrl_const_regs(emif_nr, - &ext_phy_ctrl_const_regs, &size); - - for (i = 0; i < size; i++) { - writel(ext_phy_ctrl_const_regs[i], - emif_ext_phy_ctrl_base++); - /* Update shadow registers */ - writel(ext_phy_ctrl_const_regs[i], - emif_ext_phy_ctrl_base++); - } -} - -static void do_ext_phy_settings_dra7(u32 base, const struct emif_regs *regs) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - u32 *emif_ext_phy_ctrl_base = 0; - u32 emif_nr; - const u32 *ext_phy_ctrl_const_regs; - u32 i, hw_leveling, size, phy; - - emif_nr = (base == EMIF1_BASE) ? 1 : 2; - - hw_leveling = regs->emif_rd_wr_lvl_rmp_ctl >> EMIF_REG_RDWRLVL_EN_SHIFT; - phy = regs->emif_ddr_phy_ctlr_1_init; - - emif_ext_phy_ctrl_base = (u32 *)&(emif->emif_ddr_ext_phy_ctrl_1); - - emif_get_ext_phy_ctrl_const_regs(emif_nr, - &ext_phy_ctrl_const_regs, &size); - - writel(ext_phy_ctrl_const_regs[0], &emif_ext_phy_ctrl_base[0]); - writel(ext_phy_ctrl_const_regs[0], &emif_ext_phy_ctrl_base[1]); - - /* - * Copy the predefined PHY register values - * if leveling is disabled. - */ - if (phy & EMIF_DDR_PHY_CTRL_1_RDLVLGATE_MASK_MASK) - for (i = 1; i < 6; i++) { - writel(ext_phy_ctrl_const_regs[i], - &emif_ext_phy_ctrl_base[i * 2]); - writel(ext_phy_ctrl_const_regs[i], - &emif_ext_phy_ctrl_base[i * 2 + 1]); - } - - if (phy & EMIF_DDR_PHY_CTRL_1_RDLVL_MASK_MASK) - for (i = 6; i < 11; i++) { - writel(ext_phy_ctrl_const_regs[i], - &emif_ext_phy_ctrl_base[i * 2]); - writel(ext_phy_ctrl_const_regs[i], - &emif_ext_phy_ctrl_base[i * 2 + 1]); - } - - if (phy & EMIF_DDR_PHY_CTRL_1_WRLVL_MASK_MASK) - for (i = 11; i < 25; i++) { - writel(ext_phy_ctrl_const_regs[i], - &emif_ext_phy_ctrl_base[i * 2]); - writel(ext_phy_ctrl_const_regs[i], - &emif_ext_phy_ctrl_base[i * 2 + 1]); - } - - if (hw_leveling) { - /* - * Write the init value for HW levling to occur - */ - for (i = 21; i < 35; i++) { - writel(ext_phy_ctrl_const_regs[i], - &emif_ext_phy_ctrl_base[i * 2]); - writel(ext_phy_ctrl_const_regs[i], - &emif_ext_phy_ctrl_base[i * 2 + 1]); - } - } -} - -void do_ext_phy_settings(u32 base, const struct emif_regs *regs) -{ - if (is_omap54xx()) - do_ext_phy_settings_omap5(base, regs); - else - do_ext_phy_settings_dra7(base, regs); -} - -#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -static const struct lpddr2_ac_timings timings_jedec_532_mhz = { - .max_freq = 532000000, - .RL = 8, - .tRPab = 21, - .tRCD = 18, - .tWR = 15, - .tRASmin = 42, - .tRRD = 10, - .tWTRx2 = 15, - .tXSR = 140, - .tXPx2 = 15, - .tRFCab = 130, - .tRTPx2 = 15, - .tCKE = 3, - .tCKESR = 15, - .tZQCS = 90, - .tZQCL = 360, - .tZQINIT = 1000, - .tDQSCKMAXx2 = 11, - .tRASmax = 70, - .tFAW = 50 -}; - -static const struct lpddr2_min_tck min_tck = { - .tRL = 3, - .tRP_AB = 3, - .tRCD = 3, - .tWR = 3, - .tRAS_MIN = 3, - .tRRD = 2, - .tWTR = 2, - .tXP = 2, - .tRTP = 2, - .tCKE = 3, - .tCKESR = 3, - .tFAW = 8 -}; - -static const struct lpddr2_ac_timings *ac_timings[MAX_NUM_SPEEDBINS] = { - &timings_jedec_532_mhz -}; - -static const struct lpddr2_device_timings dev_4G_S4_timings = { - .ac_timings = ac_timings, - .min_tck = &min_tck, -}; - -/* - * List of status registers to be controlled back to control registers - * after initial leveling - * readreg, writereg - */ -const struct read_write_regs omap5_bug_00339_regs[] = { - { 8, 5 }, - { 9, 6 }, - { 10, 7 }, - { 14, 8 }, - { 15, 9 }, - { 16, 10 }, - { 11, 2 }, - { 12, 3 }, - { 13, 4 }, - { 17, 11 }, - { 18, 12 }, - { 19, 13 }, -}; - -const struct read_write_regs dra_bug_00339_regs[] = { - { 7, 7 }, - { 8, 8 }, - { 9, 9 }, - { 10, 10 }, - { 11, 11 }, - { 12, 2 }, - { 13, 3 }, - { 14, 4 }, - { 15, 5 }, - { 16, 6 }, - { 17, 12 }, - { 18, 13 }, - { 19, 14 }, - { 20, 15 }, - { 21, 16 }, - { 22, 17 }, - { 23, 18 }, - { 24, 19 }, - { 25, 20 }, - { 26, 21} -}; - -const struct read_write_regs *get_bug_regs(u32 *iterations) -{ - const struct read_write_regs *bug_00339_regs_ptr = NULL; - - switch (omap_revision()) { - case OMAP5430_ES1_0: - case OMAP5430_ES2_0: - case OMAP5432_ES1_0: - case OMAP5432_ES2_0: - bug_00339_regs_ptr = omap5_bug_00339_regs; - *iterations = sizeof(omap5_bug_00339_regs)/ - sizeof(omap5_bug_00339_regs[0]); - break; - case DRA752_ES1_0: - case DRA752_ES1_1: - case DRA752_ES2_0: - case DRA722_ES1_0: - case DRA722_ES2_0: - bug_00339_regs_ptr = dra_bug_00339_regs; - *iterations = sizeof(dra_bug_00339_regs)/ - sizeof(dra_bug_00339_regs[0]); - break; - default: - printf("\n Error: UnKnown SOC"); - } - - return bug_00339_regs_ptr; -} - -void emif_get_device_timings_sdp(u32 emif_nr, - const struct lpddr2_device_timings **cs0_device_timings, - const struct lpddr2_device_timings **cs1_device_timings) -{ - /* Identical devices on EMIF1 & EMIF2 */ - *cs0_device_timings = &dev_4G_S4_timings; - *cs1_device_timings = &dev_4G_S4_timings; -} - -void emif_get_device_timings(u32 emif_nr, - const struct lpddr2_device_timings **cs0_device_timings, - const struct lpddr2_device_timings **cs1_device_timings) - __attribute__((weak, alias("emif_get_device_timings_sdp"))); - -#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ diff --git a/arch/arm/cpu/armv7/omap5/sec-fxns.c b/arch/arm/cpu/armv7/omap5/sec-fxns.c deleted file mode 100644 index 33d4ea4..0000000 --- a/arch/arm/cpu/armv7/omap5/sec-fxns.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * - * Security related functions for OMAP5 class devices - * - * (C) Copyright 2016 - * Texas Instruments, - * - * Daniel Allred - * Harinarayan Bhatta - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -#include -#include -#include -#include -#include - -/* Index for signature PPA-based TI HAL APIs */ -#define PPA_HAL_SERVICES_START_INDEX (0x200) -#define PPA_SERV_HAL_SETUP_SEC_RESVD_REGION (PPA_HAL_SERVICES_START_INDEX + 25) -#define PPA_SERV_HAL_SETUP_EMIF_FW_REGION (PPA_HAL_SERVICES_START_INDEX + 26) -#define PPA_SERV_HAL_LOCK_EMIF_FW (PPA_HAL_SERVICES_START_INDEX + 27) - -static u32 get_sec_mem_start(void) -{ - u32 sec_mem_start = CONFIG_TI_SECURE_EMIF_REGION_START; - u32 sec_mem_size = CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE; - /* - * Total reserved region is all contiguous with protected - * region coming first, followed by the non-secure region. - * If 0x0 start address is given, we simply put the reserved - * region at the end of the external DRAM. - */ - if (sec_mem_start == 0) - sec_mem_start = - (CONFIG_SYS_SDRAM_BASE + - (omap_sdram_size() - sec_mem_size)); - return sec_mem_start; -} - -int secure_emif_firewall_setup(uint8_t region_num, uint32_t start_addr, - uint32_t size, uint32_t access_perm, - uint32_t initiator_perm) -{ - int result = 1; - - /* - * Call PPA HAL API to do any other general firewall - * configuration for regions 1-6 of the EMIF firewall. - */ - debug("%s: regionNum = %x, startAddr = %x, size = %x", __func__, - region_num, start_addr, size); - - result = secure_rom_call( - PPA_SERV_HAL_SETUP_EMIF_FW_REGION, 0, 0, 4, - (start_addr & 0xFFFFFFF0) | (region_num & 0x0F), - size, access_perm, initiator_perm); - - if (result != 0) { - puts("Secure EMIF Firewall Setup failed!\n"); - debug("Return Value = %x\n", result); - } - - return result; -} - -#if (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE < \ - CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE) -#error "TI Secure EMIF: Protected size cannot be larger than total size." -#endif -int secure_emif_reserve(void) -{ - int result = 1; - u32 sec_mem_start = get_sec_mem_start(); - u32 sec_prot_size = CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE; - - /* If there is no protected region, there is no reservation to make */ - if (sec_prot_size == 0) - return 0; - - /* - * Call PPA HAL API to reserve a chunk of EMIF SDRAM - * for secure world use. This region should be carved out - * from use by any public code. EMIF firewall region 7 - * will be used to protect this block of memory. - */ - result = secure_rom_call( - PPA_SERV_HAL_SETUP_SEC_RESVD_REGION, - 0, 0, 2, sec_mem_start, sec_prot_size); - - if (result != 0) { - puts("SDRAM Firewall: Secure memory reservation failed!\n"); - debug("Return Value = %x\n", result); - } - - return result; -} - -int secure_emif_firewall_lock(void) -{ - int result = 1; - - /* - * Call PPA HAL API to lock the EMIF firewall configurations. - * After this API is called, none of the PPA HAL APIs for - * configuring the EMIF firewalls will be usable again (that - * is, calls to those APIs will return failure and have no - * effect). - */ - - result = secure_rom_call( - PPA_SERV_HAL_LOCK_EMIF_FW, - 0, 0, 0); - - if (result != 0) { - puts("Secure EMIF Firewall Lock failed!\n"); - debug("Return Value = %x\n", result); - } - - return result; -} -- cgit v1.1