From 76c91e668a54a45fa06086d4044fcae0b6ce225a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 7 Feb 2013 06:45:23 +0000 Subject: mx6: Disable Power Down Bit of watchdog On a mx6qsabresd revision C board with rev1.2 mx6q, the system gets resetted and it is not able to reach the Linux prompt. Comparing the watchdog behaviour on a revB versus revC board: - On a mx6qsabresd revB: U-Boot > reset resetting ... U-Boot 2013.01-10524-g432a3aa-dirty (Feb 07 2013 - 13:34:46) CPU: Freescale i.MX6Q rev1.1 at 792 MHz Reset cause: WDOG ... - On a mx6qsabresd revC: U-Boot > reset resetting ... U-Boot 2013.01-10524-g432a3aa-dirty (Feb 07 2013 - 13:34:46) CPU: Freescale i.MX6Q rev1.1 at 792 MHz Reset cause: POR So due to revC POR/watchdog circuitry whenever a watchdog occurs, it causes a POR. Clearing the PDE - Power Down Enable bit of WMCR registers fixes the problem and is also safe for all mx6 boards. Signed-off-by: Fabio Estevam Acked-by: Otavio Salvador Acked-by: Stefano Babic --- arch/arm/cpu/armv7/mx6/soc.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm/cpu/armv7/mx6/soc.c') diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index a8aad5d..efe4136 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -30,6 +30,7 @@ #include #include #include +#include struct scu_regs { u32 ctrl; @@ -121,12 +122,23 @@ void set_vddsoc(u32 mv) writel(reg, &anatop->reg_core); } +static void imx_set_wdog_powerdown(bool enable) +{ + struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR; + struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR; + + /* Write to the PDE (Power Down Enable) bit */ + writew(enable, &wdog1->wmcr); + writew(enable, &wdog2->wmcr); +} + int arch_cpu_init(void) { init_aips(); set_vddsoc(1200); /* Set VDDSOC to 1.2V */ + imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */ return 0; } -- cgit v1.1