From ea818dbbcd59300b56014ac2d67798a54994eb9b Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 29 Jan 2013 08:53:15 +0100 Subject: i2c, soft-i2c: switch to new multibus/multiadapter support - added to soft_i2c driver new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Heiko Schocher Cc: Simon Glass Cc: Stephen Warren --- README | 45 +++++++++++++++++++++++++++------------------ 1 file changed, 27 insertions(+), 18 deletions(-) (limited to 'README') diff --git a/README b/README index 2fe3f08..e2ca76e 100644 --- a/README +++ b/README @@ -1954,6 +1954,19 @@ CBFS (Coreboot Filesystem) support interface. ported i2c driver to the new framework: + - drivers/i2c/soft_i2c.c: + - activate first bus with CONFIG_SYS_I2C_SOFT define + CONFIG_SYS_I2C_SOFT_SPEED and CONFIG_SYS_I2C_SOFT_SLAVE + for defining speed and slave address + - activate second bus with I2C_SOFT_DECLARATIONS2 define + CONFIG_SYS_I2C_SOFT_SPEED_2 and CONFIG_SYS_I2C_SOFT_SLAVE_2 + for defining speed and slave address + - activate third bus with I2C_SOFT_DECLARATIONS3 define + CONFIG_SYS_I2C_SOFT_SPEED_3 and CONFIG_SYS_I2C_SOFT_SLAVE_3 + for defining speed and slave address + - activate fourth bus with I2C_SOFT_DECLARATIONS4 define + CONFIG_SYS_I2C_SOFT_SPEED_4 and CONFIG_SYS_I2C_SOFT_SLAVE_4 + for defining speed and slave address additional defines: @@ -1992,18 +2005,18 @@ CBFS (Coreboot Filesystem) support which defines bus 0 on adapter 0 without a mux - bus 1 on adapter 0 without a PCA9547 on address 0x70 port 1 - bus 2 on adapter 0 without a PCA9547 on address 0x70 port 2 - bus 3 on adapter 0 without a PCA9547 on address 0x70 port 3 - bus 4 on adapter 0 without a PCA9547 on address 0x70 port 4 - bus 5 on adapter 0 without a PCA9547 on address 0x70 port 5 + bus 1 on adapter 0 with a PCA9547 on address 0x70 port 1 + bus 2 on adapter 0 with a PCA9547 on address 0x70 port 2 + bus 3 on adapter 0 with a PCA9547 on address 0x70 port 3 + bus 4 on adapter 0 with a PCA9547 on address 0x70 port 4 + bus 5 on adapter 0 with a PCA9547 on address 0x70 port 5 bus 6 on adapter 1 without a mux - bus 7 on adapter 1 without a PCA9544 on address 0x72 port 1 - bus 8 on adapter 1 without a PCA9544 on address 0x72 port 2 + bus 7 on adapter 1 with a PCA9544 on address 0x72 port 1 + bus 8 on adapter 1 with a PCA9544 on address 0x72 port 2 If you do not have i2c muxes on your board, omit this define. -- Legacy I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C +- Legacy I2C Support: CONFIG_HARD_I2C NOTE: It is intended to move drivers to CONFIG_SYS_I2C which provides the following compelling advantages: @@ -2014,9 +2027,9 @@ CBFS (Coreboot Filesystem) support ** Please consider updating your I2C driver now. ** - These enable legacy I2C serial bus commands. Defining either of - (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will - include the appropriate I2C driver for the selected CPU. + These enable legacy I2C serial bus commands. Defining + CONFIG_HARD_I2C will include the appropriate I2C driver + for the selected CPU. This will allow you to use i2c commands at the u-boot command line (as long as you set CONFIG_CMD_I2C in @@ -2026,12 +2039,8 @@ CBFS (Coreboot Filesystem) support CONFIG_HARD_I2C selects a hardware I2C controller. - CONFIG_SOFT_I2C configures u-boot to use a software (aka - bit-banging) driver instead of CPM or similar hardware - support for I2C. - There are several other quantities that must also be - defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C. + defined when you define CONFIG_HARD_I2C. In both cases you will need to define CONFIG_SYS_I2C_SPEED to be the frequency (in Hz) at which you wish your i2c bus @@ -2053,7 +2062,7 @@ CBFS (Coreboot Filesystem) support That's all that's required for CONFIG_HARD_I2C. - If you use the software i2c interface (CONFIG_SOFT_I2C) + If you use the software i2c interface (CONFIG_SYS_I2C_SOFT) then the following macros need to be defined (examples are from include/configs/lwmon.h): @@ -3672,7 +3681,7 @@ to save the current settings. I2C muxes, you can define here, how to reach this EEPROM. For example: - #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" + #define CONFIG_I2C_ENV_EEPROM_BUS 1 EEPROM which holds the environment, is reached over a pca9547 i2c mux with address 0x70, channel 3. -- cgit v1.1