From cfa307f839f59f27b6fd1e80f3686e53b457f8dc Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Mon, 17 Oct 2016 20:12:43 -0600 Subject: Convert CONFIG_VIDEO_CT69000 to Kconfig This converts the following to Kconfig: CONFIG_VIDEO_CT69000 Signed-off-by: Simon Glass Reviewed-by: Tom Rini --- README | 23 ----------------------- 1 file changed, 23 deletions(-) (limited to 'README') diff --git a/README b/README index 5996598..7443b9f 100644 --- a/README +++ b/README @@ -1619,35 +1619,12 @@ CBFS (Coreboot Filesystem) support instead. - Video support: - CONFIG_VIDEO_CT69000 - - Enable Chips & Technologies 69000 Video chip - CONFIG_VIDEO_SMI_LYNXEM Enable Silicon Motion SMI 712/710/810 Video chip. The video output is selected via environment 'videoout' (1 = LCD and 2 = CRT). If videoout is undefined, CRT is assumed. - For the CT69000 and SMI_LYNXEM drivers, videomode is - selected via environment 'videomode'. Two different ways - are possible: - - "videomode=num" 'num' is a standard LiLo mode numbers. - Following standard modes are supported (* is default): - - Colors 640x480 800x600 1024x768 1152x864 1280x1024 - -------------+--------------------------------------------- - 8 bits | 0x301* 0x303 0x305 0x161 0x307 - 15 bits | 0x310 0x313 0x316 0x162 0x319 - 16 bits | 0x311 0x314 0x317 0x163 0x31A - 24 bits | 0x312 0x315 0x318 ? 0x31B - -------------+--------------------------------------------- - (i.e. setenv videomode 317; saveenv; reset;) - - - "videomode=bootargs" all the video parameters are parsed - from the bootargs. (See drivers/video/videomodes.c) - - CONFIG_VIDEO_SED13806 Enable Epson SED13806 driver. This driver supports 8bpp and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP -- cgit v1.1