From 1aeed8d71acb3290cf2446f316d6ba437e7881c4 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 13 Apr 2008 09:59:26 -0700 Subject: Coding Style cleanup; update CHANGELOG Signed-off-by: Wolfgang Denk --- CHANGELOG | 1858 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1858 insertions(+) (limited to 'CHANGELOG') diff --git a/CHANGELOG b/CHANGELOG index d5eae56..2bfaff6 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,1665 @@ +commit 7754f33c6fb7a2c050388d20bf3847038558bdcf +Author: Larry Johnson +Date: Thu Feb 21 13:58:11 2008 -0500 + + LM73 bug fix for negative temperatures and cleanup + + When the LM73 temperature sensor measures a temperature below 0 C, the + current driver does not perform sign extension, so the result returned is + 512 C too high. This patch fixes the problem, and does general cleanup + of the code. + + Signed-off-by: Larry Johnson + +commit 96ef831f713289afba19da0c8f905e99da2b23e0 +Author: Guennadi Liakhovetski +Date: Thu Apr 3 13:36:02 2008 +0200 + + cfi_flash: Support buffered writes on non-standard Spansion NOR flash + + Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit + series require different addresses for buffered write commands. Define a + configuration option to support buffered writes on those chips. A more + elegant solution would be to automatically detect those chips by parsing + their CFI records, but that would require introduction of a fixup table + into the cfi_flash driver. + + Signed-off-by: Guennadi Liakhovetski + +commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44 +Author: Lee Nipper +Date: Thu Apr 10 09:35:06 2008 -0500 + + mpc83xx: Update DIMM data bus width test to support 40-bit width + + 32-bit wide ECC memory modules report 40-bit width. + Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'. + + Signed-off-by: Lee Nipper + Signed-off-by: Kim Phillips + +commit 5fb5a689d822ca61e814bd523fc930af335242fa +Author: Dave Liu +Date: Mon Mar 31 17:05:12 2008 +0800 + + mpc83xx: Fix the bug of serdes initialization + + Currently the serdes will not be initializated due to the + partid's error. + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit 2000784818f043db7ca60e2846a72d097766b894 +Author: Dave Liu +Date: Thu Apr 3 16:28:29 2008 +0800 + + mpc83xx: Fix the SATA clock setting of 837x targets + + Currently the SATA controller clock is configured as CSB clock, + usually the CSB clock is 400/333/266MHz. + + However, The SATA IP block is only guaranteed to operate up to + 200 MHz as stated in the HW spec. + + The bug is reported by Joe D'Abbraccio + + This patch makes the SATA clock as half of CSB clock. + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Apr 2 13:41:21 2008 +0200 + + mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb' + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Kim Phillips + +commit 97b3ecb575a92fa34c1765229dbc06f2b662f139 +Author: Kumar Gala +Date: Wed Apr 9 04:20:57 2008 -0500 + + 85xx: Fix detection of MP cpu spin up + + We were looking at the wrong memory offset to determine of a secondary + cpu had been spun up or not. Also added a warning message if the + all the secondary cpus we expect don't spin up. + + Signed-off-by: Kumar Gala + +commit f3e04bdc3f360c66801a9048956e61e41a16edba +Author: Kumar Gala +Date: Tue Apr 8 10:45:50 2008 -0500 + + 85xx: Use SVR_SOC_VER instead of SVR_VER + + The recent change introduced by 'Update SVR numbers to expand support' + now requires that we use SVR_SOC_VER instead of SVR_VER if we want + to compare against a particular processor id. + + Signed-off-by: Kumar Gala + +commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7 +Author: Eugene O'Brien +Date: Fri Apr 11 10:00:35 2008 -0400 + + ppc4xx: Fix power mgt definitions for PPC440 + + Corrected DCR addresses of PPC440EP power management registers. + + Signed-off-by: Eugene O'Brien + +commit 950a392464e616b4590bc4501be46e2d7d162dea +Author: Wolfgang Denk +Date: Fri Apr 11 15:11:26 2008 +0200 + + Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18: + + Reverting became necessary after it turned out that the patches in + the u-boot-arm repo were modified, and in some cases corrupted. + + This reverts the following commits: + + 066bebd6353e33af3adefc3404560871699e9961 + 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 + c88ae20580b2b01487b4cdcc8b2a113f551aee36 + a147e56f03871bba4f05058d5e04ce7deb010b04 + d6674e0e2a6a1f033945f78838566210d3f28c95 + 8c8463cce44d849e37744749b32d38e1dfb12e50 + c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d + 8bf69d81782619187933a605f1a95ee1d069478d + 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d + a574a73852a527779234e73e17e7597fd8128882 + 1377b5583a48021d983e1fd565f7d40c89e84d63 + 1704dc20917b4f71e373e2c888497ee666d40380 + + Signed-off-by: Wolfgang Denk + +commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13 +Author: Stefan Roese +Date: Fri Apr 11 07:02:29 2008 +0200 + + ppc4xx: Update Kilauea defconfig to use device-tree booting as default + + This patch reworks the default environment on Kilauea/Haleakala. Now + "net_nfs" for exmaple uses the device-tree style booting formerly know + as "net_nfs_fdt". Also the addresses in RAM were changed because of the + new image booting support, which check for image overwriting. So the + addresses needed togeet adjusted. + + Signed-off-by: Stefan Roese + +commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28 +Author: Stefan Roese +Date: Wed Apr 9 11:58:02 2008 +0200 + + ppc4xx: Fix Canyonlands default environment to work with new image support + + Since the new image support checks for image overwriting, the default + environment needs to get adjusted to use correct addresses. + + Signed-off-by: Stefan Roese + +commit dfc6c7b647dba7ab86749616f0e9e5740deed422 +Author: Stefan Roese +Date: Wed Apr 9 11:54:11 2008 +0200 + + ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE + + The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step + closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But + on 4xx systems _start currently cannot be used for this calculation. + So revert back to the original version for now. + + Signed-off-by: Stefan Roese + +commit f91374f65eae8b42cac329e06ba1c54728278efb +Author: Michal Simek +Date: Fri Mar 28 12:49:52 2008 +0100 + + microblaze: Sort microblaze boards in MAKEALL script + +commit 62032deb7214c6d9b4396297e2aaa559bc2f8495 +Author: Michal Simek +Date: Fri Mar 28 11:58:45 2008 +0100 + + microblaze: clean microblaze_config.mk + + FLAGS are generated by U-BOOT generator. + Board specific FLAGS are in board directory + + Signed-off-by: Michal Simek + +commit cf5c679ca04a6b54bf53a55b8b9c29335b387287 +Author: Michal Simek +Date: Fri Mar 28 12:47:19 2008 +0100 + + microblaze: xupv2p fix config file for supporting FDT + +commit 188dc16b189143573b1ed90e584bf866d75cdd12 +Author: Michal Simek +Date: Fri Mar 28 11:53:02 2008 +0100 + + microblaze: ml401 fix config file for supporting FDT + + Signed-off-by: Michal Simek + +commit 4c6a6f02e239236261333759997eeaf86b30b54c +Author: Michal Simek +Date: Fri Mar 28 11:22:48 2008 +0100 + + microblaze: ml401 - add ifdef for GPIO + + Signed-off-by: Michal Simek + +commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7 +Author: Michal Simek +Date: Fri Mar 28 12:13:03 2008 +0100 + + microblaze: clean uart16550 and uartlite handling + + Signed-off-by: Michal Simek + +commit 0b20f250877441460fb79d72192954abe8498834 +Author: Michal Simek +Date: Fri Mar 28 11:08:31 2008 +0100 + + microblaze: Add Emaclite driver to Makefile + + Signed-off-by: Michal Simek + +commit 868cde5310f88234b774878e4f06e79df10a88b3 +Author: Michal Simek +Date: Fri Mar 28 11:08:01 2008 +0100 + + microblaze: Add Emac driver to Makefile + + Signed-off-by: Michal Simek + +commit 6f961b4f461f6cbb83a467d468a02e6078c2b327 +Author: Michal Simek +Date: Fri Mar 28 12:42:29 2008 +0100 + + microblaze: add Emac ethernet driver + +commit 89c53891b18cbafd29ab8931b40e27ad231b6085 +Author: Michal Simek +Date: Fri Mar 28 12:41:56 2008 +0100 + + microblaze: add Emaclite ethernet driver + +commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb +Author: Michal Simek +Date: Fri Mar 28 11:04:01 2008 +0100 + + microblaze: ML401 and XUPV2P remove emac and emaclite reference + + Signed-off-by: Michal Simek + +commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57 +Author: Michal Simek +Date: Fri Mar 28 10:59:32 2008 +0100 + + microblaze: remove old setting for emac driver + + Signed-off-by: Michal Simek + +commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57 +Author: Michal Simek +Date: Fri Mar 28 10:58:15 2008 +0100 + + microblaze: Clean Makefile from ancient emac driver + + Signed-off-by: Michal Simek + +commit ab68f921d9c741830f721c3d879c13a0c5597183 +Author: Daniel Hellstrom +Date: Fri Mar 28 10:20:43 2008 +0100 + + SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom + +commit 6ed8a43a19bb0275501bc286007daafa923552cf +Author: Daniel Hellstrom +Date: Wed Mar 26 23:38:48 2008 +0100 + + SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom + +commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12 +Author: Daniel Hellstrom +Date: Wed Mar 26 23:34:47 2008 +0100 + + SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom + +commit 823edd8a66ed50af5aaba0c79567f67061e4d79a +Author: Daniel Hellstrom +Date: Fri Mar 28 10:06:52 2008 +0100 + + SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom + +commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135 +Author: Daniel Hellstrom +Date: Wed Mar 26 23:26:48 2008 +0100 + + SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information. + + Signed-off-by: Daniel Hellstrom + +commit b330990c2f36ee4a8bb318360e1c8ba965269ab6 +Author: Daniel Hellstrom +Date: Fri Mar 28 10:00:33 2008 +0100 + + SPARC: Added support for SPARC LEON2 SOC Processor. + + Signed-off-by: Daniel Hellstrom + +commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a +Author: Daniel Hellstrom +Date: Wed Mar 26 23:00:38 2008 +0100 + + SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version. + + Signed-off-by: Daniel Hellstrom + +commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4 +Author: Daniel Hellstrom +Date: Wed Mar 26 22:51:29 2008 +0100 + + SPARC: Added support for SPARC LEON3 SOC processor. + + Signed-off-by: Daniel Hellstrom + +commit bf3d8b31169546fcddb4737391e1893fb12d033a +Author: Daniel Hellstrom +Date: Fri Mar 28 08:29:26 2008 +0100 + + SPARC: added SPARC support for new uimage in common code. + + Signed-off-by: Daniel Hellstrom + +commit 00ab32c85405a4fe65fd4128243086210fc90a21 +Author: Daniel Hellstrom +Date: Wed Mar 26 22:36:03 2008 +0100 + + SPARC: added SPARC board information to the command bdinfo. + + Signed-off-by: Daniel Hellstrom + +commit c2f02da21a3f37f0878554eebc785e04fdc4e128 +Author: Daniel Hellstrom +Date: Fri Mar 28 09:47:00 2008 +0100 + + SPARC: Added generic support for SPARC architecture. + + Signed-off-by: Daniel Hellstrom + +commit e54ec0f016803e4d9524ff71f7971bda0c51b287 +Author: Stefan Roese +Date: Thu Apr 3 14:50:34 2008 +0200 + + ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3 + + This patch fixes a problem with the RGMII setup of the 460GT. The 460GT + has 2 RGMII instances and we need to configure the 2nd RGMII instance + for the EMAC2+3 channels. + + Signed-off-by: Stefan Roese + +commit c2a545ce33b26d80337f80b533828839249fb1c9 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Apr 2 08:03:56 2008 +0200 + + MPC8xx: Fix libfdt support introduced in commit 77ff7b74 + + fdt.c: In function 'ft_cpu_setup': + fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32' + fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32' + fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet' + fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory' + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b +Author: Andy Fleming +Date: Mon Mar 31 20:45:56 2008 -0500 + + Fix fdt set command to conform to dts spec + + The fdt set command was treating properties specified as <00> and <0011> + as byte streams, rather than as an array of cells. As we already have + syntax for expressing the desire for a stream of bytes ([ xx xx ...]), + we should use the <> syntax to describe arrays of cells, which are always + 32-bits per element. If we imagine this likely (IMHO) scenario: + + > fdt set /ethernet-phy@1 reg <1> + + With the old code, this would create a bad fdt, since the reg cell would be + made to be one byte in length. But the cell must be 4 bytes, so this would + break mysteriously. + + Also, the dts spec calls for constants inside the angle brackets (<>) + to conform to C constant standards as they pertain to base. + Take this scenario: + + > fdt set /ethernet@f00 reg <0xe250000\ 0x1000> + + The old fdt command would complain that it couldn't parse that. Or, if you + wanted to specify that a certain clock ran at 33 MHz, you'd be required to + do this: + + > fdt set /mydev clock <1f78a40> + + Whereas the new code will accept decimal numbers. + + While I was in there, I extended the fdt command parser to handle property + strings which are split across multiple arguments: + + > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 > + > fdt p /ethernet@f00 + ethernet@f00 { + interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>; + }; + + Lastly, the fdt print code was rearranged slightly to print arrays of cells + if the length of the property is a multiple of 4 bytes, and to not print + leading zeros. + + Signed-off-by: Andy Fleming + +commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56 +Author: Stefan Roese +Date: Wed Apr 2 08:39:33 2008 +0200 + + ppc4xx: Canyonlands: Init SATA/PCIe port correctly + + Canyonlands (460EX) shares the first PCIe interface with the SoC SATA + interface. This usage can be configured with the jumper J6. This patch + correctly configures the SATA/PCIe PHY for SATA usage when this jumper + is installed. + + Signed-off-by: Stefan Roese + +commit 6fe2946f198481254a6ee9600d7456b8316a4083 +Author: Kim Phillips +Date: Fri Mar 28 17:37:49 2008 -0500 + + remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code + + finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d, + "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T" + started. + + Signed-off-by: Kim Phillips + +commit b5873f1732b92a25690e1513b90dfb0d644f6697 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Apr 1 07:30:51 2008 +0200 + + dataflash: Move CONFIG_HAS_DATAFLASH to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 2d934ea51f276522b532f870a820e844ff480b5b +Author: Tor Krill +Date: Fri Mar 28 15:29:45 2008 +0100 + + Add Vitesse 8601 support to TSEC driver + + Add phy_info for Vitesse VSC8601. + Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation. + + Signed-off-by: Tor Krill + Reviewed-by: Kim Phillips + Signed-off-by: Ben Warren + +commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31 +Author: Daniel Hellstrom +Date: Mon Mar 31 14:25:00 2008 +0000 + + SPARC: added SMC91111 driver in and out macros for LEON processors. + + This patch makes SPARC/LEON processors able to read and write + to the SMC91111 chip using the chip external I/O bus of the memory + controller. This patchs defines the standard in and out macros + expected by the SMC9111 driver. + + To access that I/O bus one must set up the memory controller + (MCTRL or FTMCTRL) correctly. It is assumed that the user sets + up this correctly when the other MCTRL parameters are set up. It + can be set up from the board configuration header file. + + Signed-off-by: Daniel Hellstrom + Signed-off-by: Ben Warren + +commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6 +Author: Stelian Pop +Date: Wed Mar 26 18:52:34 2008 +0100 + + Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards + + Signed-off-by: Stelian Pop + +commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 31 21:31:04 2008 +0200 + + AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7 +Author: Stelian Pop +Date: Wed Mar 26 18:52:33 2008 +0100 + + Add support for AT91SAM9260EK + + Support for booting from internal DataFlash, external DataFlash card + or NAND flash is available. + + Signed-off-by: Stelian Pop + +commit 1762f13b4aab88b685b1722f17dada247945624b +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 31 21:20:49 2008 +0200 + + AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 761712188b353494defb2b644491ff73d0daaa6f +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 31 21:12:17 2008 +0200 + + AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687 +Author: Stelian Pop +Date: Wed Mar 26 20:52:32 2008 +0100 + + Port AT91CAP9 to the new headers + + Adapt the existing AT91CAP9 code to the new headers and APIs. + + Signed-off-by: Stelian Pop + +commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa +Author: Stelian Pop +Date: Wed Mar 26 19:52:31 2008 +0100 + + Finish header files reworking + + Replace AT91CAP9.h file with several splitted header files coming + from the Linux kernel. + + This is part 2 of the replacement: more header imports and edits. + + Signed-off-by: Stelian Pop + +commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4 +Author: Stelian Pop +Date: Wed Mar 26 19:52:30 2008 +0100 + + Import several header files from Linux + + Replace AT91CAP9.h file with several splitted header files coming + from the Linux kernel. + + This is part 1 of the replacement: pristine header files import. + + Signed-off-by: Stelian Pop + +commit a8a78f2d99dc1bd30dc3595da118539b506c6118 +Author: Stelian Pop +Date: Wed Mar 26 20:52:28 2008 +0100 + + Move at91cap9 specific files to at91sam9 directory + + AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a + common infrastructure can be used. Let this infrastructure be + named after the AT91SAM9 family, and move the existing AT91CAP9 + files to the new place. + + Signed-off-by: Stelian Pop + +commit 61106a565870ff503f92b251b94bd7afef889a04 +Author: Stelian Pop +Date: Wed Mar 26 21:52:27 2008 +0100 + + Use timer_init() instead of board supplied interrupt_init() + + The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by + the board, so use timer_init() instead of interrupt_init(). + + Signed-off-by: Stelian Pop + +commit 5604e2178c5218fbfdba2e4293ca7652e829ac25 +Author: Stelian Pop +Date: Wed Mar 26 21:52:36 2008 +0100 + + Cleanup DataFlash partition handling + + DataFlash partition information has become a mess. This patch + defines a single partition scheme for Atmel DataFlashes. This partition + scheme will be used by all AT91CAP9 and AT91SAM9 boards. + + Signed-off-by: Stelian Pop + +commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42 +Author: TsiChung Liew +Date: Fri Mar 28 08:47:45 2008 -0500 + + ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S + + When the version_string function in start.S is not 4-byte align, + it will cause the compiler generates "unaligned opcodes detected + in executable segment". This issue affects all ColdFire CPUs. + By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if + it is not aligned. + + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit bae61eefe15b4d454060a7140e49ae58322be803 +Author: TsiChung Liew +Date: Tue Mar 25 15:41:15 2008 -0500 + + ColdFire: Add dspi and serial flash support for MCF5445x + + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit 48ead7a7a922fceaf494e352abfab8216a41b417 +Author: TsiChung Liew +Date: Tue Mar 18 17:37:01 2008 -0500 + + ColdFire: Remove R5200 board + + This board never went into production + + Signed-off-by: Zachary P. Landau + Acked-by: TsiChung Liew + Acked-by: John Rigby + +commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8 +Author: Matthew Fettke <[matthew.fettke@gmail.com]> +Date: Thu Jan 24 14:02:32 2008 -0600 + + ColdFire: Added M5275EVB support. + + Signed-off-by: Matthew Fettke + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b +Author: Matthew Fettke <[matthew.fettke@gmail.com]> +Date: Mon Feb 4 15:38:20 2008 -0600 + + ColdFire: Added MCF5275 cpu support. + + Signed-off-by: Matthew Fettke + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b +Author: TsiChung Liew +Date: Mon Mar 17 12:14:11 2008 -0500 + + ColdFire: Define bootdelay in configuration file for M52277EVB + + Signed-off-by: Matt Wadel + Acked-by: TsiChung Liew + Acked-by: John Rigby + +commit 77878f16cedee17161ff2336990970fffc6cea35 +Author: TsiChung Liew +Date: Mon Mar 17 12:09:07 2008 -0500 + + ColdFire: Fix second memory Chipselect for M5475EVB + + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit 43d60642395a550956cb21d287c8cfa563913d28 +Author: TsiChung Liew +Date: Thu Mar 13 14:26:32 2008 -0500 + + ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282 + + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit eb14ebe813a0cb5d47905228da446a5ad692473b +Author: Larry Johnson +Date: Sun Mar 30 20:33:04 2008 -0500 + + ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup + + Signed-off-by: Larry Johnson + +commit 02e3892021112f21067d9ed1d04ae4182725ba52 +Author: Stefan Roese +Date: Mon Mar 31 12:20:48 2008 +0200 + + ppc4xx: Small whitespace fix of esd patches + + Signed-off-by: Stefan Roese + +commit 034394abb524785047c815f00dde8cdbdc1593c5 +Author: Matthias Fuchs +Date: Sun Mar 30 18:52:44 2008 +0200 + + ppc4xx: Cleanup PMC440 board support + + Signed-off-by: Matthias Fuchs + +commit a6cc6c37188d85c25d167a4515da86f48d9a583e +Author: Matthias Fuchs +Date: Sun Mar 30 18:52:06 2008 +0200 + + ppc4xx: Add ptm configuration variables for PMC440 + + Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms + environment variables. + + Cleanup pci_target_init. + + Signed-off-by: Matthias Fuchs + +commit 7c91f51a2fe296909147f1646a1412729dd10b1d +Author: Matthias Fuchs +Date: Sun Mar 30 18:01:15 2008 +0200 + + ppc4xx: Minor updates for DU440 boards + + Signed-off-by: Matthias Fuchs + +commit d5bffeb868d6b4d462f558dac43011027b6644b7 +Author: Mike Frysinger +Date: Tue Feb 19 00:54:20 2008 -0500 + + Blackfin: cleanup and overhaul common board init functions + + Signed-off-by: Mike Frysinger + +commit b86b3416f874358acaf07519e7620cdb2145f75b +Author: Mike Frysinger +Date: Tue Feb 19 00:50:58 2008 -0500 + + Blackfin: cleanup lib_blackfin/cache.c + + Signed-off-by: Mike Frysinger + +commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44 +Author: Mike Frysinger +Date: Sun Mar 30 15:46:13 2008 -0400 + + Blackfin: unify cpu and boot modes + + All of the duplicated code for Blackfin processors and boot modes have been + unified. After all, the core is the same for all processors, just the + peripheral set differs (which gets handled in the drivers). + + Signed-off-by: Mike Frysinger + +commit 880cc4381ea8360248cddcdf87a64566745a5724 +Author: Stelian Pop +Date: Wed Mar 26 22:52:35 2008 +0100 + + Fix CFG_NO_FLASH compilation. + + Many Atmel boards have no "real" (NOR) flash on board, and rely only + on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to + be present in a board configuration file, while still enabling flash + commands like 'flinfo', 'protect', etc. + + Signed-off-by: Stelian Pop + +commit 9ce7e53abd039decea1af67aec81bbd5df7a2593 +Author: Mike Frysinger +Date: Tue Feb 19 00:58:13 2008 -0500 + + Blackfin: BF537-stamp: cleanup spi flash driver + + This punts the old spi flash driver for a new/generalized one until the + common one can be integrated. + + Signed-off-by: Mike Frysinger + +commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b +Author: Ben Warren +Date: Sun Mar 30 11:34:34 2008 -0400 + + Fix macro typo in common/cmd_mii.c + + This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I + actually applied the wrong patch. + + Signed-off-by: Ben Warren + +commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 30 16:39:53 2008 +0200 + + use correct at91rm9200 register name in m501sk board + + This fixes a naming bug for at91rm9200 lowlevel init code: + NOR boot flash is on chipselect 0, not chipselect 2. This + makes code use the register name from chip datasheets. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 480ed1dea103a1c8f4591afc77d2de3c7868d983 +Author: David Brownell +Date: Fri Jan 18 12:55:00 2008 -0800 + + use correct at91rm9200 register name + + This fixes a naming bug for at91rm9200 lowlevel init code: + NOR boot flash is on chipselect 0, not chipselect 2. This + makes code use the register name from chip datasheets. + + Signed-off-by: David Brownell + +commit a3543d6dc52b0ba9c64016687cf32d600b31a476 +Author: David Brownell +Date: Fri Jan 18 12:45:45 2008 -0800 + + add missing ARM boards to MAKEALL + + Add some missing ARM boards to MAKEALL. These build correctly, + unlike several of the boards already listed. + + Signed-off-by: David Brownell + +commit 066bebd6353e33af3adefc3404560871699e9961 +Author: Peter Pearse +Date: Sun Mar 30 11:34:09 2008 +0100 + + Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c + to prevent compilation error. + + Signed-off-by: Peter Pearse + +commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 +Author: Guennadi Liakhovetski <[lg@denx.de]> +Date: Sun Mar 30 11:32:30 2008 +0100 + + Support for the MX31ADS evaluation board from Freescale + + This patch adds support for the MX31ADS evaluation board from Freescale, + initialization code is copied from RedBoot sources, also provided by Freescale. + + Signed-off-by: Guennadi Liakhovetski + +commit c88ae20580b2b01487b4cdcc8b2a113f551aee36 +Author: Sascha Hauer +Date: Sun Mar 30 11:32:27 2008 +0100 + + Phytec Phycore-i.MX31 support + + This patch adds support for the Phytec Phycore-i.MX31 board + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit a147e56f03871bba4f05058d5e04ce7deb010b04 +Author: Sascha Hauer +Date: Sun Mar 30 11:32:24 2008 +0100 + + mx31 litekit support + + This patch adds support for the mx31 litekit board + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit d6674e0e2a6a1f033945f78838566210d3f28c95 +Author: Sascha Hauer +Date: Sun Mar 30 11:32:21 2008 +0100 + + add SMSC LAN9x1x Network driver + + This patch adds a driver for the following smsc network controllers: + LAN9115 + LAN9116 + LAN9117 + LAN9215 + LAN9216 + LAN9217 + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit 8c8463cce44d849e37744749b32d38e1dfb12e50 +Author: Sascha Hauer +Date: Sun Mar 30 11:32:16 2008 +0100 + + add an i2c driver for mx31 + + This patch adds an i2c driver for Freescale i.MX processors + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d +Author: Sascha Hauer +Date: Sun Mar 30 11:30:43 2008 +0100 + + core support for Freescale mx31 + + This patch adds the core support for Freescale mx31 + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit 8bf69d81782619187933a605f1a95ee1d069478d +Author: Sascha Hauer +Date: Sun Mar 30 11:28:46 2008 +0100 + + Separate omap24xx specific code from arm1136 + + Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx. + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d +Author: Peter Pearse +Date: Sun Mar 30 11:23:05 2008 +0100 + + Add pmdra into MAKEALL + + Signed-off-by: Peter Pearse + +commit a574a73852a527779234e73e17e7597fd8128882 +Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> +Date: Sun Mar 30 11:21:58 2008 +0100 + + Adds support for the Prodrive PMDRA board, based on a DM6441 + + Signed-off-by: Pieter Voorthuijsen + +commit 1377b5583a48021d983e1fd565f7d40c89e84d63 +Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> +Date: Sun Mar 30 11:11:34 2008 +0100 + + Removes all board specific code from the arch. part for DM644x (DaVinci) boards + + Signed-off-by: Pieter Voorthuijsen + +commit 1704dc20917b4f71e373e2c888497ee666d40380 +Author: Dirk Behme +Date: Sun Mar 30 11:09:01 2008 +0100 + + - Remove *_masked() functions as noted by Wolfgang + - Adapt register naming to recent TI spec (sprue26, March 2007) + - Fix reset_timer() handling + - As reported by Pieter [1] the overflow fix introduced a + delay of factor 16 (e.g 2 seconds became 32). While the + overflow fix is basically okay, it missed to divide udelay by + 16, too. Fix this. + [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179 + - Remove software division of timer count value (DIV(x) + macro) and do it in hardware (TIM_CLK_DIV). + Many thanks to Troy Kisky + and Pieter Voorthuijsen for + the hints & testing! + + Signed-off-by: Dirk Behme + + Acked-by: Pieter Voorthuijsen + +commit ac3315c26e143c31680750c9c13f027efbcc887e +Author: Andre Schwarz +Date: Thu Mar 6 16:45:44 2008 +0100 + + new PHY @ e1000 - 2nd try + + Add 82541ER device with latest integrated IGP2 PHY. + Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom. + + Signed-off-by: Andre Schwarz + Signed-off-by: Ben Warren + +commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8 +Author: Daniel Hellstrom +Date: Fri Mar 28 20:22:53 2008 +0100 + + SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver. + + GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without + a debug link (EDCL). The GRETH core is documented in GRIP.pdf + available at www.gaisler.com. + + If the GRETH has GigaBit support (GBIT, Scatter gather, checksum + offloading etc.) can be determined by a bit in the control register. + The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode. + + Signed-off-by: Daniel Hellstrom + Signed-off-by: Ben Warren + +commit 233a8bcd94997f3f345833a3b82e836222f2a206 +Author: Tsi-Chung Liew +Date: Mon Mar 17 17:08:22 2008 -0500 + + Add CONFIG_MII_INIT in cmd_mii.c + + Provide common configuration in do_mii() to execute mii_init() + for all cpu architectures + + Signed-off-by: TsiChung Liew + Signed-off-by: Ben Warren + +commit f605479de2deb11e834f31dfdb0af107c86aced6 +Author: Tsi-Chung Liew +Date: Mon Mar 17 17:08:16 2008 -0500 + + ColdFire: Fix FEC transmit issue for MCF5275 + + Signed-off-by: TsiChung Liew + Signed-off-by: Ben Warren + +commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746 +Author: Aras Vaichas +Date: Wed Mar 26 09:43:57 2008 +1100 + + DHCP request fix for Windows Server 2003 + + Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional + delay before sending "DHCP Request" in net/bootp.c. Required to overcome + interoperability problems with Windows Server 200x DHCP server when U-Boot + client responds too fast for server to handle. + + Signed-off-by: Aras Vaichas + Signed-off-by: Ben Warren + +commit 97bf85d784fbed485e652eb907589ad0d5cb7262 +Author: Daniel Hellstrom +Date: Fri Mar 28 20:40:19 2008 +0100 + + MTD/CFI: flash_read64 is defined a weak function (for SPARC) + + SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address. + SPARC CPUs implement flash_read64 which calls __raw_readq. + + For current SPARC architectures (LEON2 and LEON3) each read from the + FLASH must lead to a cache miss. This is because FLASH can not be set + non-cacheable since program code resides there, and alternatively disabling + cache is poor from performance view, or doing a cache flush between each + read is even poorer. + + Forcing a cache miss on a SPARC is done by a special instruction "lda" - + load alternative space, the alternative space number (ASI) is processor + implementation spcific and can be found by including . + + Signed-off-by: Daniel Hellstrom + +commit 70431e8a7393b6b793f77957f95b999fc9a269b8 +Author: Joakim Tjernlund +Date: Fri Mar 28 15:41:25 2008 +0100 + + Make MPC83xx one step closer to full relocation. + + Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx + and use GOT relative reference. + + Signed-off-by: Joakim Tjernlund + Signed-off-by: Kim Phillips + +commit 5b2793a3f3de34d439232b05acc8af67a028fd35 +Author: Michael Barkowski +Date: Thu Mar 27 14:34:43 2008 -0400 + + mpc8323erdb: fix EEPROM page size and get MAC from EEPROM + + This patch fixes eeprom page size so that you can now write more than + 64 bytes at a time. + + It also makes the board take MAC addresses, if found, from EEPROM. + + User should place up to 4 addresses at offset 0x7f00, for + eth{,1,2,3}addr. Any unused addresses should be zero. This group of + four six-byte values should have it's CRC at the end. crc32 and + eeprom commands can be used to accomplish this. + + If CRC fails, MAC addresses come from the environment. If CRC + succeeds, the environment is overwritten at startup. + + Signed-off-by: Michael Barkowski + Signed-off-by: Kim Phillips + +commit 8f325cff31f6e745e6540014b131b9a97f61944c +Author: Michael Barkowski +Date: Fri Mar 28 15:15:38 2008 -0400 + + mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE + + Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB + controller on the PCI bus in Linux on the MPC8323ERDB. + + This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's + config file. + + Signed-off-by: Michael Barkowski + Signed-off-by: Kim Phillips + +commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9 +Author: Kim Phillips +Date: Fri Mar 28 10:19:07 2008 -0500 + + mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code + + in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6, + 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing + and processor ID display. Add REVID_{MAJ,MIN}OR macros to make + REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR + convenience macros. + + Signed-off-by: Kim Phillips + +commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af +Author: Kim Phillips +Date: Fri Mar 28 10:18:53 2008 -0500 + + mpc83xx: display ddr frequency in board_add_ram_info banner + + Signed-off-by: Kim Phillips + +commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482 +Author: Kim Phillips +Date: Fri Mar 28 10:18:40 2008 -0500 + + mpc83xx: unreinvent mem_clk + + delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to + mem_*_clk for consistency's sake. + + Signed-off-by: Kim Phillips + +commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536 +Author: Kim Phillips +Date: Fri Mar 28 14:31:23 2008 -0500 + + mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards + + Signed-off-by: Kim Phillips + +commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393 +Author: Dave Liu +Date: Wed Mar 26 22:57:19 2008 +0800 + + mpc83xx: enable the SATA interface on mpc837xemds board + + Enable the first two SATA interfaces on MPC837xEMDS board, + The two SATA ports are on LYNX1. (SATA0/1 on J4/5) + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a +Author: Dave Liu +Date: Wed Mar 26 22:56:36 2008 +0800 + + mpc83xx: initialize serdes for MPC837xEMDS boards + + This patch is stolen from Anton Vorontsov's patch + for mpc837xerdb boards. + + The reference clk and xcorevdd voltage of serdes1/2 + is same between mpc837xemds and mpc837xerdb. + + 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE + 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE + 8379E: LYNX1- 2 SATA LYNX2- 2 SATA + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit cc8e839abc80887ae832767b5930d40edd6d7eb7 +Author: Stefan Roese +Date: Fri Mar 28 14:09:04 2008 +0100 + + ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision + + Canyonlands (460EX) shares the first PCIe interface with the SoC SATA + interface. This usage can be configured with the jumper J6. This patch + displays the current configuration upon bootup and changes the PCIe + init loop, to only initialize the availabel PCIe slots. + + Signed-off-by: Stefan Roese + +commit 90447ecbbac8572457b6d8903073ac3f120995ba +Author: Tor Krill +Date: Fri Mar 28 11:29:10 2008 +0100 + + MTD/CFI: Add support for 16bit legacy AMD flash + + Add entry for 512Kx16 AMD flash to jedec_table. + Read out 16bit device id if chipwidth is 16bit. + Fixed coding style after Stefans feedback + + Signed-off-by: Tor Krill + +commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e +Author: Stefan Roese +Date: Fri Mar 28 11:02:53 2008 +0100 + + ppc: Small change to CFG_MEM_TOP_HIDE description + + Signed-off-by: Stefan Roese + +commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00 +Author: Nobuhiro Iwamatsu +Date: Thu Mar 27 15:44:12 2008 +0900 + + sh: Add support stat structure and stat.h + + Signed-off-by: Nobuhiro Iwamatsu + +commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09 +Author: Mark Jonas +Date: Sat Mar 22 19:27:52 2008 +0100 + + sh: Removed warning when compiling drivers/serial/serial_sh.c. + + Signed-off-by: Mark Jonas + Signed-off-by: Nobuhiro Iwamatsu + +commit f309fa38929ffba71230c02330ffa42f4bba6333 +Author: Nobuhiro Iwamatsu +Date: Wed Mar 12 18:02:57 2008 +0900 + + sh: Remove disable_ctrlc function from R7780MP + + Signed-off-by: Nobuhiro Iwamatsu + +commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3 +Author: Nobuhiro Iwamatsu +Date: Wed Mar 12 17:55:15 2008 +0900 + + sh: Add maintainer of R7780MP to MAINTAINER file + + Update MAINTAINER entry for R7780MP. And fix maintainer's name. + + Signed-off-by: Nobuhiro Iwamatsu + +commit f5e2466f7baa887a7df0c536333eea8231333497 +Author: Nobuhiro Iwamatsu +Date: Tue Mar 25 17:11:24 2008 +0900 + + sh: Add support Renesas Solutions R2D plus board + + R2D plus is SH reference board used with SH7751R. + This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface, + one PCI bus, VGA, and two Ethernet controller. + + Signed-off-by: Nobuhiro Iwamatsu + +commit e92c95180bb5bc5fd4051598a9d60beaba48988d +Author: Nobuhiro Iwamatsu +Date: Wed Mar 12 12:15:29 2008 +0900 + + sh: Add support SH4 cache control + + Add support SH4 cache control and flash_cache function + + Signed-off-by: Nobuhiro Iwamatsu + +commit 28e5efde4d925fcb34901d0030d0648de2da7e89 +Author: Nobuhiro Iwamatsu +Date: Mon Mar 24 01:53:01 2008 +0900 + + sh: Add support PCI host driver for SH7751/SH7751R + + Signed-off-by: Nobuhiro Iwamatsu + +commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721 +Author: Nobuhiro Iwamatsu +Date: Mon Mar 24 02:11:26 2008 +0900 + + sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci + + Signed-off-by: Nobuhiro Iwamatsu + +commit 566933278101c144d75361ea682678a326c1290d +Author: Nobuhiro Iwamatsu +Date: Wed Mar 12 12:10:28 2008 +0900 + + sh: Add support SuperH SH7751/SH7751R + + Signed-off-by: Nobuhiro Iwamatsu + +commit 3313e0e26224fc9a0c445124f3455058c696df84 +Author: Mark Jonas +Date: Mon Mar 10 11:37:10 2008 +0100 + + sh: Added support for SH7720 based board MPR2. + + Signed-off-by: Mark Jonas + Signed-off-by: Nobuhiro Iwamatsu + +commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f +Author: Nobuhiro Iwamatsu +Date: Thu Mar 6 14:05:53 2008 +0900 + + sh: Fix receive FIFO level register of SH4A + + Receive FIFO level register is different in SH4A. + Because register is different, cannot occasionally receive data. + + Signed-off-by: Nobuhiro Iwamatsu + +commit c133c1fb0b590662206b0eba70f4478ee0300a9a +Author: Yusuke Goda +Date: Tue Mar 11 12:55:12 2008 +0900 + + sh: Add support Renesas Solutions R7780MP + + Renesas Solutions R7780MP is a reference board on SH7780. + This board has serial, 10/100 base Ethernet deivice, CF slot + and VGA devices. This board can set extension board. + Extension board has 10/100/1000 base Ethernet device, PCI slot, + S-ATA, iDVR slot. + + Signed-off-by: Yusuke Goda + Signed-off-by: Nobuhiro Iwamatsu + +commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28 +Author: Yusuke Goda +Date: Wed Mar 5 14:30:02 2008 +0900 + + sh: Add support PCI of SuperH and SH7780 + + This patch add support PCI of SuperH base code and SH7780 specific code. + + Signed-off-by: Yusuke Goda + Signed-off-by: Nobuhiro Iwamatsu + +commit b55523efff2ae11f0b9ae3cc405893c32eb78156 +Author: Yusuke Goda +Date: Wed Mar 5 14:23:26 2008 +0900 + + sh: Add support SH7780 + + SH7780 is CPU of Renesas Technology. + This CPU has + - CPU clock 400MHz + - PCI support + - DDR-SDRAM controller + - etc ... + + Signed-off-by: Yusuke Goda + Signed-off-by: Nobuhiro Iwamatsu + +commit c2042f5952a686c414031309b8f244513bf578f0 +Author: goda.yusuke +Date: Fri Jan 25 20:46:36 2008 +0900 + + sh: Add support Renesas Solutions Migo-R board + + Migo-R is a board based on SH7722 and has may devices. + In this patch, supported SCIF, NOR flash and Ethernet. + + Signed-off-by: Yusuke Goda + Signed-off-by: Nobuhiro Iwamatsu + +commit 74d1e66d22dac91388bc538b2fe19f735edc5b82 +Author: Bartlomiej Sieka +Date: Thu Mar 27 15:06:40 2008 +0100 + + Fix host tool build breakage, take two + + Revert commit 87c8431f and fix build breakage so that the build continues + to work on FC systems. + + Signed-off-by: Bartlomiej Sieka + +commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6 +Author: Stefan Roese +Date: Wed Mar 19 09:36:47 2008 +0100 + + ppc4xx: Enable ECC on LWMON5 + + Since all ECC related problems seem to be resolved on LWMON5, this patch + now enables ECC support. + + We have to write the ECC bytes by zeroing and flushing in smaller + steps, since the whole 256MByte takes too long for the external + watchdog. + + Signed-off-by: Stefan Roese + +commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb +Author: Larry Johnson +Date: Mon Mar 17 11:10:35 2008 -0500 + + ppc4xx: Updates to Korat-specific code + + This patch contains updates for changes for the Korat PPC440EPx board. + These changes include: + + (1) Support for "permanent" and "upgradable" copies of U-Boot, as + described in the new "doc/README.korat" file; + + (2) a new memory map for the registers in the board's CPLD; + + (3) a revised format for manufacturer's data in serial EEPROM; and + + (4) changes to track updates to U-Boot for the Sequoia board. + + Signed-off-by: Larry Johnson + +commit f766cdf89b3a2a7634b8c5869f606150e332036c +Author: Markus Brunner +Date: Thu Mar 27 10:46:25 2008 +0100 + + ppc4xx: PPC405EP Set EMAC noise filter bits + + This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359 + which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally + disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set. + + Signed-off-by: Markus Brunner + Signed-off-by: Stefan Roese + +commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991 +Author: Mike Nuss +Date: Wed Feb 20 11:54:20 2008 -0500 + + ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx + + On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured + after startup to change the speed of the clocks. This patch adds the + option CFG_PLL_RECONFIG. If this option is set to 667, the CPU + initialization code will reconfigure the PLL to run the system with a CPU + frequency of 667MHz and PLB frequency of 166MHz, without the need for an + external EEPROM. + + Signed-off-by: Mike Nuss + Acked-by: Stefan Roese + +commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1 +Author: Haavard Skinnemoen +Date: Thu Mar 27 09:12:40 2008 +0100 + + new-image: Fix host tool build breakage + + Signed-off-by: Haavard Skinnemoen + +commit 6fb4b640562a10daff0dbe537638d511b5b48650 +Author: Stefan Roese +Date: Thu Mar 27 10:24:03 2008 +0100 + + ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined + + Signed-off-by: Stefan Roese + +commit 9462732a3ec551c11862450902cd8ee1bedea6d9 +Author: Stefan Roese +Date: Wed Mar 19 10:23:43 2008 +0100 + + ppc4xx: Add fdt support to Prodrive alpr + + Since this board will probably be ported to arch/powerpc in the + near future, we add device tree support now. This way we are + "ready" for arch/powerpc from now on. + + Signed-off-by: Stefan Roese + +commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150 +Author: Pieter Voorthuijsen +Date: Mon Mar 17 09:27:56 2008 +0100 + + ppc4xx: Enable cache support on the ALPR board + + Signed-off-by: Pieter Voorthuijsen + +commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69 +Author: Stefan Roese +Date: Wed Mar 26 10:14:11 2008 +0100 + + ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched" + + If CFG_MEM_TOP_HIDE is defined in the board config header, this specified + memory area will get subtracted from the top (end) of ram and won't get + "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel + should gets passed the now "corrected" memory size and won't touch it + either. This should work for arch/ppc and arch/powerpc. Only Linux board + ports in arch/powerpc with bootwrapper support, which recalculate the + memory size from the SDRAM controller setup, will have to get fixed + in Linux additionally. + + This patch enables this config option on some PPC440EPx boards as a workaround + for the CHIP 11 errata. Here the description from the AMCC documentation: + + CHIP_11: End of memory range area restricted access. + Category: 3 + + Overview: + The 440EPx DDR controller does not acknowledge any + transaction which is determined to be crossing over the + end-of-memory-range boundary, even if the starting address is + within valid memory space. Any such transaction from any PLB4 + master will result in a PLB time-out on PLB4 bus. + + Impact: + In case of such misaligned bursts, PLB4 masters will not + retrieve any data at all, just the available data up to the + end of memory, especially the 440 CPU. For example, if a CPU + instruction required an operand located in memory within the + last 7 words of memory, the DCU master would burst read 8 + words to update the data cache and cross over the + end-of-memory-range boundary. Such a DCU read would not be + answered by the DDR controller, resulting in a PLB4 time-out + and ultimately in a Machine Check interrupt. The data would + be inaccessible to the CPU. + + Workaround: + Forbid any application to access the last 256 bytes of DDR + memory. For example, make your operating system believe that + the last 256 bytes of DDR memory are absent. AMCC has a patch + that does this, available for Linux. + + This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards: + lwmon5, korat, sequoia + + The other remaining 440EPx board were intentionally not included + since it is not clear to me, if they use the end of ram for some + other purpose. This is unclear, since these boards have CONFIG_PRAM + defined and even comments like this: + + PMC440.h: + /* esd expects pram at end of physical memory. + * So no logbuffer at the moment. + */ + + It is strongly recommended to not use the last 256 bytes on those + boards too. Patches from the board maintainers are welcome. + + Signed-off-by: Stefan Roese + +commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b +Author: Stefan Roese +Date: Thu Mar 27 10:09:05 2008 +0100 + + ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT) + + Signed-off-by: Stefan Roese + +commit d56a3ce179688cde61073a3690e21703d68fafd7 +Author: Stefan Roese +Date: Tue Mar 25 17:51:13 2008 +0100 + + ppc4xx: Correctly pass phyiscal FLASH base address into dtb + + The routine ft_board_setup() configures the EBC NOR mappings for the + Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from + 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS + problem, we need to pass the corrected address here too. + + Signed-off-by: Stefan Roese + +commit 9ad31989de12ce5c67b07c4867ead47465655c4b +Author: Stefan Roese +Date: Wed Mar 19 16:35:12 2008 +0100 + + ppc4xx: Fix compilation warning in 4xx_enet.c + + Signed-off-by: Stefan Roese + +commit 4c9e855734c523900322a7c3cdd9099b4f51b51d +Author: Stefan Roese +Date: Wed Mar 19 16:20:49 2008 +0100 + + ppc4xx: Add AMCC Glacier 406GT eval board support + + This patch adds support for the AMCC Glacier 460GT eval board. + The main difference to the Canyonlands board are listed here: + + - 4 ethernet ports instead of 2 + - no SATA port + - no USB port + + Currently EMAC2+3 are not working. This will be fixed in a later + release. + + Signed-off-by: Stefan Roese + +commit d8bd643141af4710d7f1b69bbab6b760de0af0a1 +Author: Stefan Roese +Date: Thu Mar 27 08:47:26 2008 +0100 + + ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear + + Signed-off-by: Stefan Roese + +commit b9670dd85be6e0496ef2e231043c23cad9b1d903 +Author: Anatolij Gustschin +Date: Wed Mar 26 21:05:43 2008 +0100 + + Fix out of tree building issue + + Currently U-Boot building in some external directory + doesn't work. This patch tries to fix the problem. + + Signed-off-by: Anatolij Gustschin + +commit d4ee711d8a5c366ee3f857c26b927d12e66614ff +Author: Anatolij Gustschin +Date: Wed Mar 26 18:13:33 2008 +0100 + + README: update documentation (availability, links, etc.) + + Fix typo in README + + Signed-off-by: Anatolij Gustschin + +commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f +Author: Anatolij Gustschin +Date: Wed Mar 26 17:47:44 2008 +0100 + + Fix compilation error in cmd_usb.c + + This patch fixes compilation error + cmd_usb.c: In function 'do_usb': + cmd_usb.c:552: error: void value not ignored as it ought to be + + Signed-off-by: Anatolij Gustschin + +commit d8c82db482d6b535d12b419d6440b88bf7091c9b +Author: Timur Tabi +Date: Fri Mar 14 17:45:29 2008 -0500 + + Add support for setting the I2C bus speed in fsl_i2c.c + + Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying + the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro, + but fsl_i2c.c ignores it and uses conservative value when programming the + I2C bus speed. + + Signed-off-by: Timur Tabi + Acked-by: Andy Fleming + +commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e +Author: Wolfgang Denk +Date: Thu Mar 27 00:03:57 2008 +0100 + + Coding style cleanup, update CHANGELOG + + Signed-off-by: Wolfgang Denk + commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4 Author: Dave Liu Date: Wed Mar 26 22:55:32 2008 +0800 @@ -100,6 +1762,202 @@ Date: Wed Mar 26 22:47:06 2008 +0800 Signed-off-by: Dave Liu +commit b9e749e95354f33eb5dc6653c6db7d502adb95fe +Author: Markus Klotzbuecher +Date: Wed Mar 26 18:26:43 2008 +0100 + + USB, Storage: fix a bug introduced in commit + f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info + to only print only information on one storage device, but not for + multiple. + + Signed-off-by: Markus Klotzbuecher + +commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360 +Author: Anatolij Gustschin +Date: Wed Mar 26 17:47:44 2008 +0100 + + Fix compilation error in cmd_usb.c + + This patch fixes compilation error + cmd_usb.c: In function 'do_usb': + cmd_usb.c:552: error: void value not ignored as it ought to be + + Signed-off-by: Anatolij Gustschin + Signed-off-by: Markus Klotzbuecher + +commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15 +Author: Kumar Gala +Date: Wed Mar 26 08:53:53 2008 -0500 + + 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page + + Provide a board_lmb_reserve helper function to ensure we reserve + the page of memory we are using for the boot page translation code. + + Signed-off-by: Kumar Gala + +commit 79679d80021ab095e639e250ca472fe526da02e2 +Author: Kumar Gala +Date: Wed Mar 26 08:34:25 2008 -0500 + + 85xx: Update multicore boot mechanism to ePAPR v0.81 spec + + The following changes are needed to be inline with ePAPR v0.81: + + * r4, r5 and now always set to 0 on boot release + * r7 is used to pass the size of the initial map area (IMA) + * EPAPR_MAGIC value changed for book-e processors + * changes in the spin table layout + * spin table supports a 64-bit physical release address + + Signed-off-by: Kumar Gala + +commit 25eedb2c1958a13110c7de1fc809b624053cc69c +Author: Jon Loeliger +Date: Wed Mar 19 15:02:07 2008 -0500 + + FSL: Clean up board/freescale/common/Makefile + + Each file that can be built here now follows some + CONFIG_ option so that they are appropriately built + or not, as needed. And CONFIG_ defines were added + to various board config files to make sure that happens. + + The other board/freescale/*/Makefiles no longer need + to reach up and over into ../common to build their + individually needed files any more. + + Boards that are CDS specific were renamed with cds_ prefix. + + Signed-off-by: Jon Loeliger + +commit a5af4b358a7caa9c0aa374d4d894bf762ec37669 +Author: Kumar Gala +Date: Wed Feb 27 22:00:27 2008 -0600 + + 85xx: Fix merge duplication + + ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate. + + Signed-off-by: Kumar Gala + +commit 5893b3d0a4084f87a06a5d3dc03db91206818941 +Author: James Yang +Date: Tue Feb 12 16:35:07 2008 -0600 + + 85xx: Expand CCSR space with more DDR controller registers. + + Signed-off-by: James Yang + Signed-off-by: Jon Loeliger + Signed-off-by: Kumar Gala + +commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85 +Author: James Yang +Date: Fri Feb 8 18:05:08 2008 -0600 + + 85xx: Speed up get_ddr_freq() and get_bus_freq() + + get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were + called. However, get_sys_info() recalculates extraneous information when + called each time. Have get_ddr_freq() and get_bus_freq() return memoized + values from global_data instead. + + Signed-off-by: James Yang + Signed-off-by: Kumar Gala + +commit e9ea679918fbc9a53fa2f2a904aac874ea736036 +Author: James Yang +Date: Fri Feb 8 16:46:27 2008 -0600 + + 85xx: Show DDR memory data rate in addition to the memory clock frequency. + + Show the DDR memory data rate in addition to the memory clock + frequency. For DDR/DDR2 memories the memory data rate is 2x the + memory clock. + + Signed-off-by: James Yang + Signed-off-by: Kumar Gala + +commit 591933ca6eabc440e6ed6967233aaf56fce464a3 +Author: James Yang +Date: Fri Feb 8 16:44:53 2008 -0600 + + 85xx: get_tbclk() speed up and rounding fix + + Speed up get_tbclk() by referencing pre-computed bus clock + frequency value from global data instead of sys_info_t. Fix + rounding of result to nearest; previously it was rounding + upwards. + + Signed-off-by: James Yang + Signed-off-by: Kumar Gala + +commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6 +Author: Andy Fleming +Date: Wed Feb 6 01:19:40 2008 -0600 + + Update SVR numbers to expand support + + FSL has taken to using SVR[16:23] as an SOC sub-version field. This + is used to distinguish certain variants within an SOC family. To + account for this, we add the SVR_SOC_VER() macro, and update the SVR_* + constants to reflect the larger value. We also add SVR numbers for all + of the current variants. Finally, to make things neater, rather than + use an enormous switch statement to print out the CPU type, we create + and array of SVR/name pairs (using a macro), and print out the CPU name + that matches the SVR SOC version. + + Signed-off-by: Andy Fleming + +commit b83eef440cf3cef816172ccbb5897ccd8e403cf3 +Author: Andy Fleming +Date: Wed Feb 6 01:12:57 2008 -0600 + + Add the Freescale PCI device IDs + + Signed-off-by: Andy Fleming + +commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd +Author: Kumar Gala +Date: Thu Feb 14 11:04:23 2008 -0600 + + 85xx: Added support for multicore boot mechanism + + Added the cpu command that provides a generic mechanism to get status, + reset, and release secondary cores in multicore processors. + + Added support for using the ePAPR defined spin-table mechanism on 85xx. + + Signed-off-by: Kumar Gala + Signed-off-by: Andy Fleming + +commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64 +Author: Kumar Gala +Date: Thu Jan 17 16:48:33 2008 -0600 + + 85xx: Added support for multicore boot mechanism + + Added the cpu command that provides a generic mechanism to get status, + reset, and release secondary cores in multicore processors. + + Added support for using the ePAPR defined spin-table mechanism on 85xx. + + Signed-off-by: Kumar Gala + +commit f69766e4b5d47ecd3aa58677a8da875694f364f2 +Author: Kumar Gala +Date: Wed Jan 30 14:55:14 2008 -0600 + + 85xx: Add the concept of CFG_CCSRBAR_PHYS + + When we go to 36-bit physical addresses we need to keep the concept of + the physical CCSRBAR address seperate from the virtual one. + + For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR + + Signed-off-by: Kumar Gala + commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e Author: Wolfgang Denk Date: Wed Mar 26 15:38:47 2008 +0100 -- cgit v1.1