From f868cc5a50757d94f36c312395481cb0f187d9e6 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 24 Nov 2007 20:14:44 +0100 Subject: drivers/hwmon : move hardware monitor drviers to drivers/hwmon Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- Makefile | 2 +- drivers/Makefile | 1 - drivers/ds1722.c | 142 ------------------------------------ drivers/hwmon/Makefile | 56 ++++++++++++++ drivers/hwmon/adm1021.c | 174 ++++++++++++++++++++++++++++++++++++++++++++ drivers/hwmon/ds1621.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/hwmon/ds1722.c | 142 ++++++++++++++++++++++++++++++++++++ drivers/hwmon/ds1775.c | 156 +++++++++++++++++++++++++++++++++++++++ drivers/hwmon/lm75.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/hwmon/lm81.c | 148 +++++++++++++++++++++++++++++++++++++ dtt/Makefile | 55 -------------- dtt/adm1021.c | 174 -------------------------------------------- dtt/ds1621.c | 190 ------------------------------------------------ dtt/ds1775.c | 156 --------------------------------------- dtt/lm75.c | 185 ---------------------------------------------- dtt/lm81.c | 148 ------------------------------------- 16 files changed, 1052 insertions(+), 1052 deletions(-) delete mode 100644 drivers/ds1722.c create mode 100644 drivers/hwmon/Makefile create mode 100644 drivers/hwmon/adm1021.c create mode 100644 drivers/hwmon/ds1621.c create mode 100644 drivers/hwmon/ds1722.c create mode 100644 drivers/hwmon/ds1775.c create mode 100644 drivers/hwmon/lm75.c create mode 100644 drivers/hwmon/lm81.c delete mode 100644 dtt/Makefile delete mode 100644 dtt/adm1021.c delete mode 100644 dtt/ds1621.c delete mode 100644 dtt/ds1775.c delete mode 100644 dtt/lm75.c delete mode 100644 dtt/lm81.c diff --git a/Makefile b/Makefile index 160b906..3aa93e0 100644 --- a/Makefile +++ b/Makefile @@ -206,9 +206,9 @@ LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs LIBS += net/libnet.a LIBS += disk/libdisk.a LIBS += rtc/librtc.a -LIBS += dtt/libdtt.a LIBS += drivers/libdrivers.a LIBS += drivers/bios_emulator/libatibiosemu.a +LIBS += drivers/hwmon/libhwmon.a LIBS += drivers/i2c/libi2c.a LIBS += drivers/input/libinput.a LIBS += drivers/nand/libnand.a diff --git a/drivers/Makefile b/drivers/Makefile index 745a5cc..d4882f5 100755 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -28,7 +28,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)libdrivers.a COBJS-y += ali512x.o -COBJS-y += ds1722.o COBJS-y += ns87308.o COBJS-y += status_led.o diff --git a/drivers/ds1722.c b/drivers/ds1722.c deleted file mode 100644 index c19ee01..0000000 --- a/drivers/ds1722.c +++ /dev/null @@ -1,142 +0,0 @@ - -#include - -#ifdef CONFIG_DS1722 - -#include - -static void ds1722_select(int dev) -{ - ssi_set_interface(4096, 0, 0, 0); - ssi_chip_select(0); - udelay(1); - ssi_chip_select(dev); - udelay(1); -} - - -u8 ds1722_read(int dev, int addr) -{ - u8 res; - - ds1722_select(dev); - - ssi_tx_byte(addr); - res = ssi_rx_byte(); - - ssi_chip_select(0); - - return res; -} - -void ds1722_write(int dev, int addr, u8 data) -{ - ds1722_select(dev); - - ssi_tx_byte(0x80|addr); - ssi_tx_byte(data); - - ssi_chip_select(0); -} - - -u16 ds1722_temp(int dev, int resolution) -{ - static int useconds[] = { - 75000, 150000, 300000, 600000, 1200000 - }; - char temp; - u16 res; - - - /* set up the desired resulotion ... */ - ds1722_write(dev, 0, 0xe0 | (resolution << 1)); - - /* wait while the chip measures the tremperature */ - udelay(useconds[resolution]); - - res = (temp = ds1722_read(dev, 2)) << 8; - - if (temp < 0) { - temp = (16 - (ds1722_read(dev, 1) >> 4)) & 0x0f; - } else { - temp = (ds1722_read(dev, 1) >> 4); - } - - switch (temp) { - case 0: - /* .0000 */ - break; - case 1: - /* .0625 */ - res |=1; - break; - case 2: - /* .1250 */ - res |=1; - break; - case 3: - /* .1875 */ - res |=2; - break; - case 4: - /* .2500 */ - res |=3; - break; - case 5: - /* .3125 */ - res |=3; - break; - case 6: - /* .3750 */ - res |=4; - break; - case 7: - /* .4375 */ - res |=4; - break; - case 8: - /* .5000 */ - res |=5; - break; - case 9: - /* .5625 */ - res |=6; - break; - case 10: - /* .6250 */ - res |=6; - break; - case 11: - /* .6875 */ - res |=7; - break; - case 12: - /* .7500 */ - res |=8; - break; - case 13: - /* .8125 */ - res |=8; - break; - case 14: - /* .8750 */ - res |=9; - break; - case 15: - /* .9375 */ - res |=9; - break; - } - return res; - -} - -int ds1722_probe(int dev) -{ - u16 temp = ds1722_temp(dev, DS1722_RESOLUTION_12BIT); - printf("%d.%d deg C\n\n", (char)(temp >> 8), temp & 0xff); - return 0; -} - -#endif diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile new file mode 100644 index 0000000..cebb2ba --- /dev/null +++ b/drivers/hwmon/Makefile @@ -0,0 +1,56 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2001 +# Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +#CFLAGS += -DDEBUG + +LIB = $(obj)libhwmon.a + +COBJS-y += adm1021.o +COBJS-y += ds1621.o +COBJS-y += ds1722.o +COBJS-y += ds1775.o +COBJS-y += lm75.o +COBJS-y += lm81.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c new file mode 100644 index 0000000..9f65cfb --- /dev/null +++ b/drivers/hwmon/adm1021.c @@ -0,0 +1,174 @@ +/* + * (C) Copyright 2003 + * Murray Jensen, CSIRO-MIT, Murray.Jensen@csiro.au + * + * based on dtt/lm75.c which is ... + * + * (C) Copyright 2001 + * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Analog Devices's ADM1021 + * "Low Cost Microprocessor System Temperature Monitor" + */ + +#include + +#ifdef CONFIG_DTT_ADM1021 + +#include +#include + +typedef + struct { + uint i2c_addr:7; /* 7bit i2c chip address */ + uint conv_rate:3; /* conversion rate */ + uint enable_alert:1; /* enable alert output pin */ + uint enable_local:1; /* enable internal temp sensor */ + uint max_local:8; /* internal temp maximum */ + uint min_local:8; /* internal temp minimum */ + uint enable_remote:1; /* enable remote temp sensor */ + uint max_remote:8; /* remote temp maximum */ + uint min_remote:8; /* remote temp minimum */ + } +dtt_cfg_t; + +dtt_cfg_t dttcfg[] = CFG_DTT_ADM1021; + +int +dtt_read (int sensor, int reg) +{ + dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; + uchar data; + + if (i2c_read(dcp->i2c_addr, reg, 1, &data, 1) != 0) + return -1; + + return (int)data; +} /* dtt_read() */ + +int +dtt_write (int sensor, int reg, int val) +{ + dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; + uchar data; + + data = (uchar)(val & 0xff); + + if (i2c_write(dcp->i2c_addr, reg, 1, &data, 1) != 0) + return 1; + + return 0; +} /* dtt_write() */ + +static int +_dtt_init (int sensor) +{ + dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; + int reg, val; + + if (((sensor & 1) == 0 ? dcp->enable_local : dcp->enable_remote) == 0) + return 1; /* sensor is disabled (or rather ignored) */ + + /* + * Setup High Limit register + */ + if ((sensor & 1) == 0) { + reg = DTT_WRITE_LOC_HIGHLIM; + val = dcp->max_local; + } + else { + reg = DTT_WRITE_REM_HIGHLIM; + val = dcp->max_remote; + } + if (dtt_write (sensor, reg, val) != 0) + return 1; + + /* + * Setup Low Limit register + */ + if ((sensor & 1) == 0) { + reg = DTT_WRITE_LOC_LOWLIM; + val = dcp->min_local; + } + else { + reg = DTT_WRITE_REM_LOWLIM; + val = dcp->min_remote; + } + if (dtt_write (sensor, reg, val) != 0) + return 1; + + /* shouldn't hurt if the rest gets done twice */ + + /* + * Setup Conversion Rate register + */ + if (dtt_write (sensor, DTT_WRITE_CONVRATE, dcp->conv_rate) != 0) + return 1; + + /* + * Setup configuraton register + */ + val = 0; /* running */ + if (dcp->enable_alert == 0) + val |= DTT_CONFIG_ALERT_MASKED; /* mask ALERT pin */ + if (dtt_write (sensor, DTT_WRITE_CONFIG, val) != 0) + return 1; + + return 0; +} /* _dtt_init() */ + +int +dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + const char *const header = "DTT: "; + + /* switch to correct I2C bus */ + I2C_SET_BUS(CFG_DTT_BUS_NUM); + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf ("%s%d FAILED INIT\n", header, i+1); + else + printf ("%s%d is %i C\n", header, i+1, + dtt_get_temp(sensors[i])); + } + + return (0); +} /* dtt_init() */ + +int +dtt_get_temp (int sensor) +{ + signed char val; + + if ((sensor & 1) == 0) + val = dtt_read(sensor, DTT_READ_LOC_VALUE); + else + val = dtt_read(sensor, DTT_READ_REM_VALUE); + + return (int) val; +} /* dtt_get_temp() */ + +#endif /* CONFIG_DTT_ADM1021 */ diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c new file mode 100644 index 0000000..4948181 --- /dev/null +++ b/drivers/hwmon/ds1621.c @@ -0,0 +1,190 @@ +/* + * (C) Copyright 2001 + * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Dallas Semiconductor's DS1621 Digital Thermometer and Thermostat. + */ + +#include + +#ifdef CONFIG_DTT_DS1621 +#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ + (CFG_EEPROM_PAGE_WRITE_BITS < 1) +# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_DS1621" +#endif +#include +#include + +/* + * Device code + */ +#define DTT_I2C_DEV_CODE 0x48 /* Dallas Semi's DS1621 */ + +int dtt_read(int sensor, int reg) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and command. + * + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1621*/ + + /* + * Prepare to handle 2 byte result. + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_HIGH) || (reg == DTT_TEMP_LOW)) + dlen = 2; + else + dlen = 1; + + /* + * Now try to read the register. + */ + if (i2c_read(sensor, reg, 1, data, dlen) != 0) + return 1; + + /* + * Handle 2 byte result. + */ + if (dlen == 2) + return ((int)((short)data[1] + (((short)data[0]) << 8))); + + return (int)data[0]; +} /* dtt_read() */ + + +int dtt_write(int sensor, int reg, int val) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and register. + * + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); + + /* + * Handle various data sizes. + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_HIGH) || (reg == DTT_TEMP_LOW)) { + dlen = 2; + data[0] = (char)((val >> 8) & 0xff); /* MSB first */ + data[1] = (char)(val & 0xff); + } + else if ((reg == DTT_WRITE_START_CONV) || (reg == DTT_WRITE_STOP_CONV)) { + dlen = 0; + data[0] = (char)0; + data[1] = (char)0; + } + else { + dlen = 1; + data[0] = (char)(val & 0xff); + } + + /* + * Write value to device. + */ + if (i2c_write(sensor, reg, 1, data, dlen) != 0) + return 1; + + return 0; +} /* dtt_write() */ + + +static int _dtt_init(int sensor) +{ + int val; + + /* + * Setup High Temp. + */ + val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_HIGH, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + /* + * Setup Low Temp - hysteresis. + */ + val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_LOW, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + /* + * Setup configuraton register + * + * Clear THF & TLF, Reserved = 1, Polarity = Active Low, One Shot = YES + * + * We run in polled mode, since there isn't any way to know if this + * lousy device is ready to provide temperature readings on power up. + */ + val = 0x9; + if (dtt_write(sensor, DTT_CONFIG, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + return 0; +} /* _dtt_init() */ + + +int dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf("DTT%d: FAILED\n", i+1); + else + printf("DTT%d: %i C\n", i+1, dtt_get_temp(sensors[i])); + } + + return (0); +} /* dtt_init() */ + + +int dtt_get_temp(int sensor) +{ + int i; + + /* + * Start a conversion, may take up to 1 second. + */ + dtt_write(sensor, DTT_WRITE_START_CONV, 0); + for (i = 0; i <= 10; i++) { + udelay(100000); + if (dtt_read(sensor, DTT_CONFIG) & 0x80) + break; + } + + return (dtt_read(sensor, DTT_READ_TEMP) / 256); +} /* dtt_get_temp() */ + + +#endif /* CONFIG_DTT_DS1621 */ diff --git a/drivers/hwmon/ds1722.c b/drivers/hwmon/ds1722.c new file mode 100644 index 0000000..c19ee01 --- /dev/null +++ b/drivers/hwmon/ds1722.c @@ -0,0 +1,142 @@ + +#include + +#ifdef CONFIG_DS1722 + +#include + +static void ds1722_select(int dev) +{ + ssi_set_interface(4096, 0, 0, 0); + ssi_chip_select(0); + udelay(1); + ssi_chip_select(dev); + udelay(1); +} + + +u8 ds1722_read(int dev, int addr) +{ + u8 res; + + ds1722_select(dev); + + ssi_tx_byte(addr); + res = ssi_rx_byte(); + + ssi_chip_select(0); + + return res; +} + +void ds1722_write(int dev, int addr, u8 data) +{ + ds1722_select(dev); + + ssi_tx_byte(0x80|addr); + ssi_tx_byte(data); + + ssi_chip_select(0); +} + + +u16 ds1722_temp(int dev, int resolution) +{ + static int useconds[] = { + 75000, 150000, 300000, 600000, 1200000 + }; + char temp; + u16 res; + + + /* set up the desired resulotion ... */ + ds1722_write(dev, 0, 0xe0 | (resolution << 1)); + + /* wait while the chip measures the tremperature */ + udelay(useconds[resolution]); + + res = (temp = ds1722_read(dev, 2)) << 8; + + if (temp < 0) { + temp = (16 - (ds1722_read(dev, 1) >> 4)) & 0x0f; + } else { + temp = (ds1722_read(dev, 1) >> 4); + } + + switch (temp) { + case 0: + /* .0000 */ + break; + case 1: + /* .0625 */ + res |=1; + break; + case 2: + /* .1250 */ + res |=1; + break; + case 3: + /* .1875 */ + res |=2; + break; + case 4: + /* .2500 */ + res |=3; + break; + case 5: + /* .3125 */ + res |=3; + break; + case 6: + /* .3750 */ + res |=4; + break; + case 7: + /* .4375 */ + res |=4; + break; + case 8: + /* .5000 */ + res |=5; + break; + case 9: + /* .5625 */ + res |=6; + break; + case 10: + /* .6250 */ + res |=6; + break; + case 11: + /* .6875 */ + res |=7; + break; + case 12: + /* .7500 */ + res |=8; + break; + case 13: + /* .8125 */ + res |=8; + break; + case 14: + /* .8750 */ + res |=9; + break; + case 15: + /* .9375 */ + res |=9; + break; + } + return res; + +} + +int ds1722_probe(int dev) +{ + u16 temp = ds1722_temp(dev, DS1722_RESOLUTION_12BIT); + printf("%d.%d deg C\n\n", (char)(temp >> 8), temp & 0xff); + return 0; +} + +#endif diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c new file mode 100644 index 0000000..e44cee3 --- /dev/null +++ b/drivers/hwmon/ds1775.c @@ -0,0 +1,156 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Dallas Semiconductor's DS1775 Digital Thermometer and Thermostat + */ + +#include + +#ifdef CONFIG_DTT_DS1775 +#include +#include + +#define DTT_I2C_DEV_CODE 0x49 /* Dallas Semi's DS1775 device code */ + +int dtt_read(int sensor, int reg) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and command + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1775 */ + + /* + * Prepare to handle 2 byte result + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) + dlen = 2; + else + dlen = 1; + + /* + * Now try to read the register + */ + if (i2c_read(sensor, reg, 1, data, dlen) != 0) + return 1; + + /* + * Handle 2 byte result + */ + if (dlen == 2) + return ((int)((short)data[1] + (((short)data[0]) << 8))); + + return (int) data[0]; +} + + +int dtt_write(int sensor, int reg, int val) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and register + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); + + /* + * Handle various data sizes + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) { + dlen = 2; + data[0] = (char)((val >> 8) & 0xff); /* MSB first */ + data[1] = (char)(val & 0xff); + } else { + dlen = 1; + data[0] = (char)(val & 0xff); + } + + /* + * Write value to device + */ + if (i2c_write(sensor, reg, 1, data, dlen) != 0) + return 1; + + return 0; +} + + +static int _dtt_init(int sensor) +{ + int val; + + /* + * Setup High Temp + */ + val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_OS, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + /* + * Setup Low Temp - hysteresis + */ + val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + /* + * Setup configuraton register + * + * Fault Tolerance limits 4, Thermometer resolution bits is 9, + * Polarity = Active Low,continuous conversion mode, Thermostat + * mode is interrupt mode + */ + val = 0xa; + if (dtt_write(sensor, DTT_CONFIG, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + return 0; +} + + +int dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf("DTT%d: FAILED\n", i+1); + else + printf("DTT%d: %i C\n", i+1, dtt_get_temp(sensors[i])); + } + + return (0); +} + + +int dtt_get_temp(int sensor) +{ + return (dtt_read(sensor, DTT_READ_TEMP) / 256); +} + + +#endif /* CONFIG_DTT_DS1775 */ diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c new file mode 100644 index 0000000..63f3b75 --- /dev/null +++ b/drivers/hwmon/lm75.c @@ -0,0 +1,185 @@ +/* + * (C) Copyright 2001 + * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * On Semiconductor's LM75 Temperature Sensor + */ + +#include + +#ifdef CONFIG_DTT_LM75 +#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ + (CFG_EEPROM_PAGE_WRITE_BITS < 1) +# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM75" +#endif + +#include +#include + + +/* + * Device code + */ +#define DTT_I2C_DEV_CODE 0x48 /* ON Semi's LM75 device */ + +int dtt_read(int sensor, int reg) +{ + int dlen; + uchar data[2]; + + /* + * Validate 'reg' param + */ + if((reg < 0) || (reg > 3)) + return -1; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* calculate address of lm75 */ + + /* + * Prepare to handle 2 byte result. + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_HYST) || + (reg == DTT_TEMP_SET)) + dlen = 2; + else + dlen = 1; + + /* + * Now try to read the register. + */ + if (i2c_read(sensor, reg, 1, data, dlen) != 0) + return -1; + + /* + * Handle 2 byte result. + */ + if (dlen == 2) + return ((int)((short)data[1] + (((short)data[0]) << 8))); + + + return (int)data[0]; +} /* dtt_read() */ + + +int dtt_write(int sensor, int reg, int val) +{ + int dlen; + uchar data[2]; + + /* + * Validate 'reg' param + */ + if ((reg < 0) || (reg > 3)) + return 1; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* calculate address of lm75 */ + + /* + * Handle 2 byte values. + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_HYST) || + (reg == DTT_TEMP_SET)) { + dlen = 2; + data[0] = (char)((val >> 8) & 0xff); /* MSB first */ + data[1] = (char)(val & 0xff); + } else { + dlen = 1; + data[0] = (char)(val & 0xff); + } + + /* + * Write value to register. + */ + if (i2c_write(sensor, reg, 1, data, dlen) != 0) + return 1; + + return 0; +} /* dtt_write() */ + + +static int _dtt_init(int sensor) +{ + int val; + + /* + * Setup TSET ( trip point ) register + */ + val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */ + if (dtt_write(sensor, DTT_TEMP_SET, val) != 0) + return 1; + + /* + * Setup THYST ( untrip point ) register - Hysteresis + */ + val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0) + return 1; + + /* + * Setup configuraton register + */ +#ifdef CONFIG_DTT_AD7414 + /* config = alert active low and disabled */ + val = 0x60; +#else + /* config = 6 sample integration, int mode, active low, and enable */ + val = 0x18; +#endif + if (dtt_write(sensor, DTT_CONFIG, val) != 0) + return 1; + + return 0; +} /* _dtt_init() */ + + +int dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + const char *const header = "DTT: "; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf("%s%d FAILED INIT\n", header, i+1); + else + printf("%s%d is %i C\n", header, i+1, + dtt_get_temp(sensors[i])); + } + + return (0); +} /* dtt_init() */ + +int dtt_get_temp(int sensor) +{ + return (dtt_read(sensor, DTT_READ_TEMP) / 256); +} /* dtt_get_temp() */ + +#endif /* CONFIG_DTT_LM75 */ diff --git a/drivers/hwmon/lm81.c b/drivers/hwmon/lm81.c new file mode 100644 index 0000000..03bc53d --- /dev/null +++ b/drivers/hwmon/lm81.c @@ -0,0 +1,148 @@ +/* + * (C) Copyright 2006 + * Heiko Schocher, DENX Software Enginnering + * + * based on dtt/lm75.c which is ... + * + * (C) Copyright 2001 + * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * On Semiconductor's LM81 Temperature Sensor + */ + +#include + +#ifdef CONFIG_DTT_LM81 +#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ + (CFG_EEPROM_PAGE_WRITE_BITS < 1) +# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM81" +#endif + +#include +#include + +/* + * Device code + */ +#define DTT_I2C_DEV_CODE 0x2c /* ON Semi's LM81 device */ + +int dtt_read(int sensor, int reg) +{ + int dlen = 1; + uchar data[2]; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */ + + /* + * Now try to read the register. + */ + if (i2c_read(sensor, reg, 1, data, dlen) != 0) + return -1; + + return (int)data[0]; +} /* dtt_read() */ + + +int dtt_write(int sensor, int reg, int val) +{ + uchar data; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */ + + data = (char)(val & 0xff); + + /* + * Write value to register. + */ + if (i2c_write(sensor, reg, 1, &data, 1) != 0) + return 1; + + return 0; +} /* dtt_write() */ + +#define DTT_MANU 0x3e +#define DTT_REV 0x3f +#define DTT_CONFIG 0x40 +#define DTT_ADR 0x48 + +static int _dtt_init(int sensor) +{ + int man; + int adr; + int rev; + + if (dtt_write (sensor, DTT_CONFIG, 0x01) < 0) + return 1; + /* The LM81 needs 400ms to get the correct values ... */ + udelay (400000); + man = dtt_read (sensor, DTT_MANU); + if (man != 0x01) + return 1; + adr = dtt_read (sensor, DTT_ADR); + if (adr < 0) + return 1; + rev = dtt_read (sensor, DTT_REV); + if (adr < 0) + return 1; + + printf ("DTT: Found LM81@%x Rev: %d\n", adr, rev); + return 0; +} /* _dtt_init() */ + + +int dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + const char *const header = "DTT: "; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf("%s%d FAILED INIT\n", header, i+1); + else + printf("%s%d is %i C\n", header, i+1, + dtt_get_temp(sensors[i])); + } + + return (0); +} /* dtt_init() */ + +#define TEMP_FROM_REG(temp) \ + ((temp)<256?((((temp)&0x1fe) >> 1) * 10) + ((temp) & 1) * 5: \ + ((((temp)&0x1fe) >> 1) -255) * 10 - ((temp) & 1) * 5) \ + +int dtt_get_temp(int sensor) +{ + int val = dtt_read (sensor, DTT_READ_TEMP); + int tmpcnf = dtt_read (sensor, DTT_CONFIG_TEMP); + + return (TEMP_FROM_REG((val << 1) + ((tmpcnf & 0x80) >> 7))) / 10; +} /* dtt_get_temp() */ + +#endif /* CONFIG_DTT_LM81 */ diff --git a/dtt/Makefile b/dtt/Makefile deleted file mode 100644 index 72e5c88..0000000 --- a/dtt/Makefile +++ /dev/null @@ -1,55 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2001 -# Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -#CFLAGS += -DDEBUG - -LIB = $(obj)libdtt.a - -COBJS-y += lm75.o -COBJS-y += ds1621.o -COBJS-y += adm1021.o -COBJS-y += lm81.o -COBJS-y += ds1775.o - -COBJS := $(COBJS-y) -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) - -all: $(LIB) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/dtt/adm1021.c b/dtt/adm1021.c deleted file mode 100644 index 9f65cfb..0000000 --- a/dtt/adm1021.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * (C) Copyright 2003 - * Murray Jensen, CSIRO-MIT, Murray.Jensen@csiro.au - * - * based on dtt/lm75.c which is ... - * - * (C) Copyright 2001 - * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Analog Devices's ADM1021 - * "Low Cost Microprocessor System Temperature Monitor" - */ - -#include - -#ifdef CONFIG_DTT_ADM1021 - -#include -#include - -typedef - struct { - uint i2c_addr:7; /* 7bit i2c chip address */ - uint conv_rate:3; /* conversion rate */ - uint enable_alert:1; /* enable alert output pin */ - uint enable_local:1; /* enable internal temp sensor */ - uint max_local:8; /* internal temp maximum */ - uint min_local:8; /* internal temp minimum */ - uint enable_remote:1; /* enable remote temp sensor */ - uint max_remote:8; /* remote temp maximum */ - uint min_remote:8; /* remote temp minimum */ - } -dtt_cfg_t; - -dtt_cfg_t dttcfg[] = CFG_DTT_ADM1021; - -int -dtt_read (int sensor, int reg) -{ - dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; - uchar data; - - if (i2c_read(dcp->i2c_addr, reg, 1, &data, 1) != 0) - return -1; - - return (int)data; -} /* dtt_read() */ - -int -dtt_write (int sensor, int reg, int val) -{ - dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; - uchar data; - - data = (uchar)(val & 0xff); - - if (i2c_write(dcp->i2c_addr, reg, 1, &data, 1) != 0) - return 1; - - return 0; -} /* dtt_write() */ - -static int -_dtt_init (int sensor) -{ - dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; - int reg, val; - - if (((sensor & 1) == 0 ? dcp->enable_local : dcp->enable_remote) == 0) - return 1; /* sensor is disabled (or rather ignored) */ - - /* - * Setup High Limit register - */ - if ((sensor & 1) == 0) { - reg = DTT_WRITE_LOC_HIGHLIM; - val = dcp->max_local; - } - else { - reg = DTT_WRITE_REM_HIGHLIM; - val = dcp->max_remote; - } - if (dtt_write (sensor, reg, val) != 0) - return 1; - - /* - * Setup Low Limit register - */ - if ((sensor & 1) == 0) { - reg = DTT_WRITE_LOC_LOWLIM; - val = dcp->min_local; - } - else { - reg = DTT_WRITE_REM_LOWLIM; - val = dcp->min_remote; - } - if (dtt_write (sensor, reg, val) != 0) - return 1; - - /* shouldn't hurt if the rest gets done twice */ - - /* - * Setup Conversion Rate register - */ - if (dtt_write (sensor, DTT_WRITE_CONVRATE, dcp->conv_rate) != 0) - return 1; - - /* - * Setup configuraton register - */ - val = 0; /* running */ - if (dcp->enable_alert == 0) - val |= DTT_CONFIG_ALERT_MASKED; /* mask ALERT pin */ - if (dtt_write (sensor, DTT_WRITE_CONFIG, val) != 0) - return 1; - - return 0; -} /* _dtt_init() */ - -int -dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - - /* switch to correct I2C bus */ - I2C_SET_BUS(CFG_DTT_BUS_NUM); - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf ("%s%d FAILED INIT\n", header, i+1); - else - printf ("%s%d is %i C\n", header, i+1, - dtt_get_temp(sensors[i])); - } - - return (0); -} /* dtt_init() */ - -int -dtt_get_temp (int sensor) -{ - signed char val; - - if ((sensor & 1) == 0) - val = dtt_read(sensor, DTT_READ_LOC_VALUE); - else - val = dtt_read(sensor, DTT_READ_REM_VALUE); - - return (int) val; -} /* dtt_get_temp() */ - -#endif /* CONFIG_DTT_ADM1021 */ diff --git a/dtt/ds1621.c b/dtt/ds1621.c deleted file mode 100644 index 4948181..0000000 --- a/dtt/ds1621.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * (C) Copyright 2001 - * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Dallas Semiconductor's DS1621 Digital Thermometer and Thermostat. - */ - -#include - -#ifdef CONFIG_DTT_DS1621 -#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ - (CFG_EEPROM_PAGE_WRITE_BITS < 1) -# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_DS1621" -#endif -#include -#include - -/* - * Device code - */ -#define DTT_I2C_DEV_CODE 0x48 /* Dallas Semi's DS1621 */ - -int dtt_read(int sensor, int reg) -{ - int dlen; - uchar data[2]; - - /* - * Calculate sensor address and command. - * - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1621*/ - - /* - * Prepare to handle 2 byte result. - */ - if ((reg == DTT_READ_TEMP) || - (reg == DTT_TEMP_HIGH) || (reg == DTT_TEMP_LOW)) - dlen = 2; - else - dlen = 1; - - /* - * Now try to read the register. - */ - if (i2c_read(sensor, reg, 1, data, dlen) != 0) - return 1; - - /* - * Handle 2 byte result. - */ - if (dlen == 2) - return ((int)((short)data[1] + (((short)data[0]) << 8))); - - return (int)data[0]; -} /* dtt_read() */ - - -int dtt_write(int sensor, int reg, int val) -{ - int dlen; - uchar data[2]; - - /* - * Calculate sensor address and register. - * - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); - - /* - * Handle various data sizes. - */ - if ((reg == DTT_READ_TEMP) || - (reg == DTT_TEMP_HIGH) || (reg == DTT_TEMP_LOW)) { - dlen = 2; - data[0] = (char)((val >> 8) & 0xff); /* MSB first */ - data[1] = (char)(val & 0xff); - } - else if ((reg == DTT_WRITE_START_CONV) || (reg == DTT_WRITE_STOP_CONV)) { - dlen = 0; - data[0] = (char)0; - data[1] = (char)0; - } - else { - dlen = 1; - data[0] = (char)(val & 0xff); - } - - /* - * Write value to device. - */ - if (i2c_write(sensor, reg, 1, data, dlen) != 0) - return 1; - - return 0; -} /* dtt_write() */ - - -static int _dtt_init(int sensor) -{ - int val; - - /* - * Setup High Temp. - */ - val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; - if (dtt_write(sensor, DTT_TEMP_HIGH, val) != 0) - return 1; - udelay(50000); /* Max 50ms */ - - /* - * Setup Low Temp - hysteresis. - */ - val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80; - if (dtt_write(sensor, DTT_TEMP_LOW, val) != 0) - return 1; - udelay(50000); /* Max 50ms */ - - /* - * Setup configuraton register - * - * Clear THF & TLF, Reserved = 1, Polarity = Active Low, One Shot = YES - * - * We run in polled mode, since there isn't any way to know if this - * lousy device is ready to provide temperature readings on power up. - */ - val = 0x9; - if (dtt_write(sensor, DTT_CONFIG, val) != 0) - return 1; - udelay(50000); /* Max 50ms */ - - return 0; -} /* _dtt_init() */ - - -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("DTT%d: FAILED\n", i+1); - else - printf("DTT%d: %i C\n", i+1, dtt_get_temp(sensors[i])); - } - - return (0); -} /* dtt_init() */ - - -int dtt_get_temp(int sensor) -{ - int i; - - /* - * Start a conversion, may take up to 1 second. - */ - dtt_write(sensor, DTT_WRITE_START_CONV, 0); - for (i = 0; i <= 10; i++) { - udelay(100000); - if (dtt_read(sensor, DTT_CONFIG) & 0x80) - break; - } - - return (dtt_read(sensor, DTT_READ_TEMP) / 256); -} /* dtt_get_temp() */ - - -#endif /* CONFIG_DTT_DS1621 */ diff --git a/dtt/ds1775.c b/dtt/ds1775.c deleted file mode 100644 index e44cee3..0000000 --- a/dtt/ds1775.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Dallas Semiconductor's DS1775 Digital Thermometer and Thermostat - */ - -#include - -#ifdef CONFIG_DTT_DS1775 -#include -#include - -#define DTT_I2C_DEV_CODE 0x49 /* Dallas Semi's DS1775 device code */ - -int dtt_read(int sensor, int reg) -{ - int dlen; - uchar data[2]; - - /* - * Calculate sensor address and command - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1775 */ - - /* - * Prepare to handle 2 byte result - */ - if ((reg == DTT_READ_TEMP) || - (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) - dlen = 2; - else - dlen = 1; - - /* - * Now try to read the register - */ - if (i2c_read(sensor, reg, 1, data, dlen) != 0) - return 1; - - /* - * Handle 2 byte result - */ - if (dlen == 2) - return ((int)((short)data[1] + (((short)data[0]) << 8))); - - return (int) data[0]; -} - - -int dtt_write(int sensor, int reg, int val) -{ - int dlen; - uchar data[2]; - - /* - * Calculate sensor address and register - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); - - /* - * Handle various data sizes - */ - if ((reg == DTT_READ_TEMP) || - (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) { - dlen = 2; - data[0] = (char)((val >> 8) & 0xff); /* MSB first */ - data[1] = (char)(val & 0xff); - } else { - dlen = 1; - data[0] = (char)(val & 0xff); - } - - /* - * Write value to device - */ - if (i2c_write(sensor, reg, 1, data, dlen) != 0) - return 1; - - return 0; -} - - -static int _dtt_init(int sensor) -{ - int val; - - /* - * Setup High Temp - */ - val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; - if (dtt_write(sensor, DTT_TEMP_OS, val) != 0) - return 1; - udelay(50000); /* Max 50ms */ - - /* - * Setup Low Temp - hysteresis - */ - val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80; - if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0) - return 1; - udelay(50000); /* Max 50ms */ - - /* - * Setup configuraton register - * - * Fault Tolerance limits 4, Thermometer resolution bits is 9, - * Polarity = Active Low,continuous conversion mode, Thermostat - * mode is interrupt mode - */ - val = 0xa; - if (dtt_write(sensor, DTT_CONFIG, val) != 0) - return 1; - udelay(50000); /* Max 50ms */ - - return 0; -} - - -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("DTT%d: FAILED\n", i+1); - else - printf("DTT%d: %i C\n", i+1, dtt_get_temp(sensors[i])); - } - - return (0); -} - - -int dtt_get_temp(int sensor) -{ - return (dtt_read(sensor, DTT_READ_TEMP) / 256); -} - - -#endif /* CONFIG_DTT_DS1775 */ diff --git a/dtt/lm75.c b/dtt/lm75.c deleted file mode 100644 index 63f3b75..0000000 --- a/dtt/lm75.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - * (C) Copyright 2001 - * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * On Semiconductor's LM75 Temperature Sensor - */ - -#include - -#ifdef CONFIG_DTT_LM75 -#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ - (CFG_EEPROM_PAGE_WRITE_BITS < 1) -# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM75" -#endif - -#include -#include - - -/* - * Device code - */ -#define DTT_I2C_DEV_CODE 0x48 /* ON Semi's LM75 device */ - -int dtt_read(int sensor, int reg) -{ - int dlen; - uchar data[2]; - - /* - * Validate 'reg' param - */ - if((reg < 0) || (reg > 3)) - return -1; - - /* - * Calculate sensor address and register. - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* calculate address of lm75 */ - - /* - * Prepare to handle 2 byte result. - */ - if ((reg == DTT_READ_TEMP) || - (reg == DTT_TEMP_HYST) || - (reg == DTT_TEMP_SET)) - dlen = 2; - else - dlen = 1; - - /* - * Now try to read the register. - */ - if (i2c_read(sensor, reg, 1, data, dlen) != 0) - return -1; - - /* - * Handle 2 byte result. - */ - if (dlen == 2) - return ((int)((short)data[1] + (((short)data[0]) << 8))); - - - return (int)data[0]; -} /* dtt_read() */ - - -int dtt_write(int sensor, int reg, int val) -{ - int dlen; - uchar data[2]; - - /* - * Validate 'reg' param - */ - if ((reg < 0) || (reg > 3)) - return 1; - - /* - * Calculate sensor address and register. - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* calculate address of lm75 */ - - /* - * Handle 2 byte values. - */ - if ((reg == DTT_READ_TEMP) || - (reg == DTT_TEMP_HYST) || - (reg == DTT_TEMP_SET)) { - dlen = 2; - data[0] = (char)((val >> 8) & 0xff); /* MSB first */ - data[1] = (char)(val & 0xff); - } else { - dlen = 1; - data[0] = (char)(val & 0xff); - } - - /* - * Write value to register. - */ - if (i2c_write(sensor, reg, 1, data, dlen) != 0) - return 1; - - return 0; -} /* dtt_write() */ - - -static int _dtt_init(int sensor) -{ - int val; - - /* - * Setup TSET ( trip point ) register - */ - val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */ - if (dtt_write(sensor, DTT_TEMP_SET, val) != 0) - return 1; - - /* - * Setup THYST ( untrip point ) register - Hysteresis - */ - val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80; - if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0) - return 1; - - /* - * Setup configuraton register - */ -#ifdef CONFIG_DTT_AD7414 - /* config = alert active low and disabled */ - val = 0x60; -#else - /* config = 6 sample integration, int mode, active low, and enable */ - val = 0x18; -#endif - if (dtt_write(sensor, DTT_CONFIG, val) != 0) - return 1; - - return 0; -} /* _dtt_init() */ - - -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("%s%d FAILED INIT\n", header, i+1); - else - printf("%s%d is %i C\n", header, i+1, - dtt_get_temp(sensors[i])); - } - - return (0); -} /* dtt_init() */ - -int dtt_get_temp(int sensor) -{ - return (dtt_read(sensor, DTT_READ_TEMP) / 256); -} /* dtt_get_temp() */ - -#endif /* CONFIG_DTT_LM75 */ diff --git a/dtt/lm81.c b/dtt/lm81.c deleted file mode 100644 index 03bc53d..0000000 --- a/dtt/lm81.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * (C) Copyright 2006 - * Heiko Schocher, DENX Software Enginnering - * - * based on dtt/lm75.c which is ... - * - * (C) Copyright 2001 - * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * On Semiconductor's LM81 Temperature Sensor - */ - -#include - -#ifdef CONFIG_DTT_LM81 -#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ - (CFG_EEPROM_PAGE_WRITE_BITS < 1) -# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM81" -#endif - -#include -#include - -/* - * Device code - */ -#define DTT_I2C_DEV_CODE 0x2c /* ON Semi's LM81 device */ - -int dtt_read(int sensor, int reg) -{ - int dlen = 1; - uchar data[2]; - - /* - * Calculate sensor address and register. - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */ - - /* - * Now try to read the register. - */ - if (i2c_read(sensor, reg, 1, data, dlen) != 0) - return -1; - - return (int)data[0]; -} /* dtt_read() */ - - -int dtt_write(int sensor, int reg, int val) -{ - uchar data; - - /* - * Calculate sensor address and register. - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */ - - data = (char)(val & 0xff); - - /* - * Write value to register. - */ - if (i2c_write(sensor, reg, 1, &data, 1) != 0) - return 1; - - return 0; -} /* dtt_write() */ - -#define DTT_MANU 0x3e -#define DTT_REV 0x3f -#define DTT_CONFIG 0x40 -#define DTT_ADR 0x48 - -static int _dtt_init(int sensor) -{ - int man; - int adr; - int rev; - - if (dtt_write (sensor, DTT_CONFIG, 0x01) < 0) - return 1; - /* The LM81 needs 400ms to get the correct values ... */ - udelay (400000); - man = dtt_read (sensor, DTT_MANU); - if (man != 0x01) - return 1; - adr = dtt_read (sensor, DTT_ADR); - if (adr < 0) - return 1; - rev = dtt_read (sensor, DTT_REV); - if (adr < 0) - return 1; - - printf ("DTT: Found LM81@%x Rev: %d\n", adr, rev); - return 0; -} /* _dtt_init() */ - - -int dtt_init (void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - const char *const header = "DTT: "; - - for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf("%s%d FAILED INIT\n", header, i+1); - else - printf("%s%d is %i C\n", header, i+1, - dtt_get_temp(sensors[i])); - } - - return (0); -} /* dtt_init() */ - -#define TEMP_FROM_REG(temp) \ - ((temp)<256?((((temp)&0x1fe) >> 1) * 10) + ((temp) & 1) * 5: \ - ((((temp)&0x1fe) >> 1) -255) * 10 - ((temp) & 1) * 5) \ - -int dtt_get_temp(int sensor) -{ - int val = dtt_read (sensor, DTT_READ_TEMP); - int tmpcnf = dtt_read (sensor, DTT_CONFIG_TEMP); - - return (TEMP_FROM_REG((val << 1) + ((tmpcnf & 0x80) >> 7))) / 10; -} /* dtt_get_temp() */ - -#endif /* CONFIG_DTT_LM81 */ -- cgit v1.1