From f355f117a6d735b0c3cba79f1cb24829cf8cae25 Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Mon, 14 Dec 2015 17:07:46 +0800 Subject: MLK-12001 MMC:USDHC: Clear DLL_CTRL delay line settings at driver init Clear DLL_CTRL delay line settings at USDHC initialization to eliminate the pre-settings from boot rom. U-boot should re-init the USDHC not reply on the value set by boot from. On MX6DL, the ROM has set the default delay line(DLLCTRL) to 0x1000021, when eMMC works on DDR mode in kernel, it will possibly cause data CRC errors. Even u-boot always use eMMC in SDR mode, for safety sake, it is better to clear it too. Signed-off-by: Ye.Li --- drivers/mmc/fsl_esdhc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 6356bc5..7d002b5 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -530,6 +530,9 @@ static int esdhc_init(struct mmc *mmc) /* Put VEND_SPEC to default value */ esdhc_write32(®s->vendorspec, VENDORSPEC_INIT); + + /* Disable DLL_CTRL delay line */ + esdhc_write32(®s->dllctrl, 0x0); #endif #ifndef ARCH_MXC -- cgit v1.1