From eb1a4d0a471505c169bef19a73a60f8641f0b875 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 10 Aug 2009 10:39:12 +0200 Subject: Prepare 2009.08-rc2 Update CHANGELOG Signed-off-by: Wolfgang Denk --- CHANGELOG | 1020 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Makefile | 2 +- 2 files changed, 1021 insertions(+), 1 deletion(-) diff --git a/CHANGELOG b/CHANGELOG index 31955fe..4b8d132 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,927 @@ +commit 53cc18c71b2b920cca171874c6663e274fa80556 +Author: Wolfgang Denk +Date: Mon Aug 10 10:38:34 2009 +0200 + + Minor coding style cleanup. + + Signed-off-by: Wolfgang Denk + +commit d371708a1beda0f529756e614af785b30461379e +Author: Wolfgang Denk +Date: Mon Aug 10 09:59:10 2009 +0200 + + net/tftp.c: fix warning: pointer targets differ in signedness + + tftp.c:294: warning: pointer targets in passing argument 1 of 'strlen' + differ in signedness + + This was only visible for the utx8245 board which seems to have DEBUG + enabled. + + Signed-off-by: Wolfgang Denk + +commit 3ed9e943fdfe51174b23989d48563b8c1b7d2ea8 +Author: Dirk Behme +Date: Sat Aug 8 16:06:47 2009 +0200 + + ARM Cortex A8: Remove bogus config.mk entries + + Remove bogus config.mk entry, fix newline and remove redundant + omap3/config.mk + + Signed-off-by: Dirk Behme + +commit cd3dcba1422d3441503251fbc69cf2437c440781 +Author: Dirk Behme +Date: Sat Aug 8 12:46:09 2009 +0200 + + OMAP3: Fix missing GPMC_CONFIG_CS0_BASE + + Applying two indepenent OMAP3 patches resulted in missing + GPMC_CONFIG_CS0_BASE. Patch "omap3: embedd gpmc_cs into gpmc + config struct" removes GPMC_CONFIG_CS0_BASE, independent patch + "omap3: bug fix for NOR boot support" introduces it's usage. + Re-introduce GPMC_CONFIG_CS0_BASE. + + Signed-off-by: Dirk Behme + +commit ba3dbaf281130029ecb970a922551902c1d80b50 +Author: Ilya Yanok +Date: Mon Jun 8 04:12:49 2009 +0400 + + mxc-mmc: sdhc host driver for MX2 and MX3 proccessor + + This is a port of Linux driver for SDHC host controller hardware + found on Freescale's MX2 and MX3 processors. Uses new generic MMC + framework (CONFIG_GENERIC_MMC) and it looks like there are some + problems with a framework (at least on LE cpus). Some of these + problems are addressed in the following patches. + + Signed-off-by: Ilya Yanok + +commit 642d7b63c343633dcafc4e23a20e32604a05ff13 +Author: Alessandro Rubini +Date: Fri Aug 7 12:35:47 2009 +0200 + + kirkwood/gpio.h: remove duplicate definition + + Signed-off-by: Alessandro Rubini + +commit 3ac374c0f0b7d856f1a43317a286f2079106bd6a +Author: Albin Tonnerre +Date: Fri Aug 7 12:37:36 2009 +0200 + + Add driver for the ST M95xxx SPI EEPROM + + This chip is used in a number of boards manufactured by Calao-Systems + which should be supported soon. This driver provides the necessary + spi_read and spi_write functions necessary to communicate with the chip. + + Signed-off-by: Albin Tonnerre + +commit 30951960bae9a2c33e324a7165962a082e913f9e +Author: Prafulla Wadaskar +Date: Fri Aug 7 22:27:32 2009 +0530 + + arm: Sheevaplug: Fixed NAND specific warning + + It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF + for NAND specific warning removal, same is done in this patch + + Signed-off-by: Prafulla Wadaskar + +commit 317734966e763fdee183898c0ed940c9bada2541 +Author: Josh Boyer +Date: Fri Aug 7 13:53:20 2009 -0400 + + Dual-license IBM code contributions + + It was brought to our attention that U-Boot contains code derived from the + IBM OpenBIOS source code originally provided with some of the older PowerPC + 4xx development boards. As a result, the original license of this code has + been carried in the various files for a number of years in the U-Boot project. + + IBM is dual-licensing the IBM code contributions already present in U-Boot + under either the terms of the GNU General Public License version 2, or the + original code license already present. + + Signed-off-by: Josh Boyer + +commit cfd700be9f5ed289fd57a9bd61e266319badcb0d +Author: Kumar Gala +Date: Wed Aug 5 09:03:54 2009 -0500 + + fdt: Fix fdt_pci_dma_ranges handling of 64-bit ranges + + If the size of a region equal to 4G it can't be represnted in a 32-bit + BAR so we should have marked that case as MEM64. + + Additionally bump the number of inbound windows up to 4 to handle the + fact that Freescale PPCs that have an implicit window for CCSRBAR. + + Signed-off-by: Kumar Gala + +commit 59b4d7471c42e955bd9846892a0cc7478171778d +Author: Wolfgang Denk +Date: Thu Aug 6 21:29:59 2009 +0200 + + ARM EABI: add new helper functions resp. function names + + The ARM EABI defines new names for GCC helper functions, + and GCC seems to need some new functions as well. + + This patch is a minimal-invasive approach to fix problems with EABI + conformant tool chains (to be used with "USE_PRIVATE_LIBGCC=yes"). + + Signed-off-by: Wolfgang Denk + Tested-by: Dirk Behme + +commit 197324d7d998a791e5137b8176981b4af25220ae +Author: Peter Tyser +Date: Wed Aug 5 16:18:44 2009 -0500 + + hush: Fix bogus free() call + + An off-by-one error in hush.c resulted in an unintentional free() call + every time a command was executed + + Signed-off-by: Peter Tyser + +commit ff27650bb255e2275a212357b78c3b77cbf1d2e9 +Author: Detlev Zundel +Date: Wed Aug 5 18:37:45 2009 +0200 + + digsy_mtc: Update default environment + + Signed-off-by: Detlev Zundel + +commit 0b40bd439a33bde9e3cccf1acb5744225d0c6103 +Author: Detlev Zundel +Date: Wed Aug 5 18:37:44 2009 +0200 + + digsy_mtc: Add delay in SPI transfers to the companion controller. + + While at it, remove initialization of variables which will be set + before usage in all cases. + + Signed-off-by: Detlev Zundel + +commit 0bf00750e082a004e5fb058925622ae72890cc56 +Author: Anatolij Gustschin +Date: Wed Aug 5 18:37:43 2009 +0200 + + digsy_mtc: minor fixes for mtc command help + + Add mtc state subcommand description to the + help of mtc command. + + Remove some newlines in description of commands + for proper help formating. + + Signed-off-by: Anatolij Gustschin + +commit 5cc69084189bf49aa99d13d57515be72d1844bdf +Author: Grzegorz Bernacki +Date: Wed Aug 5 18:37:42 2009 +0200 + + digsy_mtc: Add mtc state command. + + Signed-off-by: Grzegorz Bernacki + +commit 716655288a53c95fad203ebf21d0b8ffdc2f7525 +Author: Wolfgang Denk +Date: Tue Jul 28 22:35:39 2009 +0200 + + Partition support: remove newline from partition name + + Remove bogus newline character that got added to the .name field of + the disk_partition_t structure. + + Signed-off-by: Wolfgang Denk + +commit 3f1649fb0dfb1e5c8890de154c332c394db5cdb5 +Author: Luigi 'Comio' Mantellini +Date: Tue Jul 28 09:33:17 2009 +0200 + + Fix LZMA string.h header inclusion issue and remove unused variables. + + Signed-off-by: Luigi 'Comio' Mantellini + +commit 1c6232f1e2eae87e0e36d489611eb6891dff21e1 +Author: Jens Scharsig +Date: Mon Jul 27 15:28:42 2009 +0200 + + bus_vcxk.c: fix warning: unused variable 'lineptr' + + Signed-off-by: Jens Scharsig + +commit 18304f7675e84252965b4e24cba279071f1da472 +Author: Mike Frysinger +Date: Fri Jul 24 17:51:27 2009 -0400 + + env: kill off default_environment_size + + The only environment type that uses this variable is spi flash, and that is + only because it is reimplementing the common set_default_env() function. + So fix the spi flash code and kill off the default_environment_size in the + process. + + Signed-off-by: Mike Frysinger + +commit bedd8403f77f790e9876578885eab1200ba2f8d8 +Author: Mike Frysinger +Date: Thu Jul 23 16:37:48 2009 -0400 + + export SPI functions to standalone apps + + While we're here, fix the broken #ifdef handling in _exports.h. + + Signed-off-by: Mike Frysinger + +commit 3b9043a7c03290c9bdbef03848307263f5f3472c +Author: Penda Naveen Kumar +Date: Fri Jul 31 00:06:36 2009 +0530 + + omap3: bug fix for NOR boot support + + This patch provides bug fix, when omap3 uses nor boot. + + Signed-off-by: Penda Naveen Kumar + Acked-by: Dirk Behme + +commit 61c68ae0b43bb5d6ab32958c45289aa197b1a2d1 +Author: Michael Evans +Date: Mon Jul 13 20:13:45 2009 +0100 + + Fix examples for OMAP3 boards... + + The attached patch corrects an error in the examples/Makefile which + causes the applications in the examples directory to hang on OMAP3 + based boards. The current Makefile sets -Ttext during linking to + 0x0c100000 which is outside of addressable SDRAM memory. The script + corrects the existing ifeq...else...endif logic to look at the VENDOR + tag rather than the CPU tag. + + The patch affects the following configs: omap3_beagle_config, + omap3_overo_config, omap3_evm_config, omap3_pandora_config, + omap3_zoom1_config and omap3_zoom2_config. + + Signed-off-by: Michael Evans + + Edited commit message. + Signed-off-by: Wolfgang Denk + +commit a3d1421dfd0bb1a729e171f8a093ac837f92cec6 +Author: Dirk Behme +Date: Sat Aug 8 09:30:23 2009 +0200 + + omap3: use only fixed-size types inside ctrl_structs + + replace variable types in ctrl_structs for omap3 by those with + fixed size (u8, u16, u32). + Additional ifndef-protection is needed by examples which do not + compile when including asm/types.h + + Signed-off-by: Matthias Ludwig + Signed-off-by: Dirk Behme + +commit 894113529e3a04871544dde977d6d7adee05d3bf +Author: Dirk Behme +Date: Sat Aug 8 09:30:22 2009 +0200 + + omap3: replace all instances of gpmc config struct by one global + + Signed-off-by: Matthias Ludwig + Signed-off-by: Dirk Behme + +commit 97a099eaa48d5c762c4f73c52c3090c513b8b877 +Author: Dirk Behme +Date: Sat Aug 8 09:30:21 2009 +0200 + + omap3: remove typedefs for configuration structs + + Signed-off-by: Matthias Ludwig + Signed-off-by: Dirk Behme + +commit aa0707897c49c330b7d6b8d8362e44f60f224732 +Author: Roy Zang +Date: Fri Jul 31 13:34:02 2009 +0800 + + Add Intel E1000 PCIE card support + + Based on Intel PRO/1000 Network Driver 7.3.20-k2 + Add Intel E1000 PCIE card support. The following cards are added: + INTEL_82571EB_COPPER + INTEL_82571EB_FIBER, + INTEL_82571EB_SERDES + INTEL_82571EB_QUAD_COPPER + INTEL_82571PT_QUAD_COPPER + INTEL_82571EB_QUAD_FIBER + INTEL_82571EB_QUAD_COPPER_LOWPROFILE + INTEL_82571EB_SERDES_DUAL + INTEL_82571EB_SERDES_QUAD + INTEL_82572EI_COPPER + INTEL_82572EI_FIBER + INTEL_82572EI_SERDES + INTEL_82572EI + INTEL_82573E + INTEL_82573E_IAMT + INTEL_82573L + INTEL_82546GB_QUAD_COPPER_KSP3 + INTEL_80003ES2LAN_COPPER_DPT + INTEL_80003ES2LAN_SERDES_DPT + INTEL_80003ES2LAN_COPPER_SPT + INTEL_80003ES2LAN_SERDES_SPT + + 82571EB_COPPER dual ports, + 82572EI single port, + 82572EI_COPPER single port PCIE cards + and + 82545EM_COPPER, + 82541GI_LF + pci cards are tested on both P2020 board + and MPC8544DS board. + + Signed-off-by: Roy Zang + + Signed-off-by: Ben Warren + +commit 86848a74c3c8eb2f8dd179d039ee604dc45288cf +Author: Mike Frysinger +Date: Wed Jul 15 21:31:28 2009 -0400 + + net: sync env ethaddr to device enetaddr in eth_init() + + In the previous enetaddr refactoring, the assumption with commit 56b555a644 + was that the eth layer would handle the env -> device enetaddr syncing. + This was not the case as eth_initialize() is called only once and the sync + occurs there. So make sure the eth_init() function does the env -> device + sync with every network init. + + Reported-by: Andrzej Wolski + Signed-off-by: Mike Frysinger + Signed-off-by: Ben Warren + +commit 0ebf04c607b54a352629dcf7e76b76f1785dae54 +Author: Robin Getz +Date: Thu Jul 23 03:01:03 2009 -0400 + + minor debug cleanups in ./net + + Minor ./net cleanups - no functional changes + - change #ifdef DEBUG printf(); #endif to just debug() + - changed __FUNCTION__ to __func__ + - got rid of extra whitespace between function and opening brace + - removed unnecessary braces on if statements + + gcc dead code elimination should make this functionally/size equivalent + when DEBUG is not defined. (confirmed on Blackfin, with gcc 4.3.3). + + Signed-off-by: Robin Getz + + Signed-off-by: Ben Warren + +commit 187af954cf7958c24efcf0fd62289bbdb4f1f24e +Author: Matthias Ludwig +Date: Tue May 19 09:09:31 2009 +0200 + + omap3: embedd gpmc_cs into gpmc config struct + + Embedd chip select configuration into struct for gpmc config + instead of having it completely separated as suggested by + Wolfgang Denk on + http://lists.denx.de/pipermail/u-boot/2009-May/052247.html + + Signed-off-by: Matthias Ludwig + +commit 06bffc6ea52d4b390843d295d438b2037d12e5fd +Author: David Brownell +Date: Thu Jul 16 18:40:55 2009 -0700 + + rm9200 lowevel_init: don't touch reserved/readonly registers + + For some reason the AT91rm9200 lowlevel init writes to a bunch of + reserved or read-only addresses. All the boards seem to define the + value-to-be-written values as zero ... but they shouldn't actually + be writing *anything* there. + + No documented erratum justifies these accesses. It looks like maybe + some pre-release BDI-2000 setup code has been carried along by cargo + cult programming since at least late 2004 (per GIT history). + + Here's a patch disabling what seems to be bogosity. Tested on a + csb337; there were no behavioral changes. + + Signed-off-by: David Brownell + + on RM9200ek + Tested-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 301b7db88fbdf7d118efb79b371b2527a2c31868 +Author: David Hunter +Date: Thu Jul 30 14:32:49 2009 -0700 + + pxa: Fix typo in GCDR(x) + + Fix a typo in the GCDR(x) macro. It's a good thing no one was using it. + + Signed-off-by: David Hunter + +commit 3c448e648221879ae0e030e94508b4f9f63b7ab8 +Author: Eric Benard +Date: Sat Jul 18 23:45:15 2009 +0200 + + Add AT91SAM9260 to at91's lowlevel_init.S + + Needed for AT91SAM9260 NOR Boot on Eukrea's CPU9260. + + Signed-off-by: Eric Benard + +commit 56bdfa961242fc6acaeebc800640a12b28db3899 +Author: Dirk Eibach +Date: Thu Jul 30 09:36:33 2009 +0200 + + ppc4xx: Remove check for PPC460EX from CompactCenter + + Signed-off-by: Dirk Eibach + Signed-off-by: Stefan Roese + +commit c3fa4f0c8684c862ecd3fb622fab1e17e44e82e1 +Author: Stefan Roese +Date: Wed Jul 29 08:46:10 2009 +0200 + + ppc4xx: Add support for PPC460EX/460GT rev B chip to AMCC Canyonlands + + This patch is based on a diff created by Phong Vo from AMCC. + + Signed-off-by: Phong Vo + Signed-off-by: Stefan Roese + +commit 89bcc4875007ef6608297dc11e7a0d1fbd9900d2 +Author: Stefan Roese +Date: Wed Jul 29 08:45:27 2009 +0200 + + ppc4xx: Add basic support for AMCC PPC460EX/460GT rev B chips + + This patch is based on a diff created by Phong Vo from AMCC. + + Signed-off-by: Phong Vo + Signed-off-by: Stefan Roese + +commit 82a7edc7ea8f5fe55fed4ff7e127469569e539c4 +Author: Stefan Roese +Date: Tue Jul 28 15:12:04 2009 +0200 + + ppc4xx: Canyonlands-NAND-boot: Support 2 Crucial 512MByte SODIMM's + + Some Canyonlands boards are equipped with different SODIMM's. This is no + problem with the "normal" NOR booting Canyonlands U-Boot, since it + automatically detects the SODIMM's via SPD data and correctly configures + them. But the NAND booting version is different. Here we only have 4k + of image size to completely setup the hardware, including DDR2 setup. + So we need to use a fixed DDR2 setup here. This doesn't work for different + SODIMM's right now. + + Currently only this Crucial SODIMM is support: + CT6464AC667.8FB (dual ranked) + + Now some boards are shipped with this SODIMM: + CT6464AC667.4FE (single ranked) + + This patch now supports both SODIMM's by configuring first for the dual + ranked DIMM. A quick shows, if this module is really installed. If this test + fails, the DDR2 controller is re-configured for the single + ranked SODIMM. + + Tested with those SODIMM's: + + CT6464AC667.8FB (dual ranked) + CT6464AC667.4FE (single ranked) + + Signed-off-by: Stefan Roese + +commit 27dd5f8e1062684f1ba685760409d9b2ab6691bf +Author: Stefan Roese +Date: Tue Jul 28 10:56:03 2009 +0200 + + ppc4xx: amcc: Move "kernel_addr_r" etc to higher locations (> 16MB) + + This patch moves the load addresses for kernel, fdt and ramdisk to higher + addresses (>= 16MB). This enables booting of bigger kernel images (e.g. + lockdep enabled). + + Signed-off-by: Stefan Roese + +commit 6942efc2be1b90054fa4afa5cda7023469fe08b9 +Author: Stefan Roese +Date: Tue Jul 28 10:50:32 2009 +0200 + + ppc4xx: amcc: Set CONFIG_SYS_BOOTMAPSZ to 16MB for big kernels + + This patch changes CONFIG_SYS_BOOTMAPSZ from 8MB to 16MB which is the + initial TLB on 40x PPC's in the Linux kernel. With this change even bigger + Linux kernels (> 8MB) can be booted. + + This patch also sets CONFIG_SYS_BOOTM_LEN to 16MB (default 8MB) to enable + decompression of bigger images. + + Signed-off-by: Stefan Roese + +commit 4c2e3da82dc2b7f8b39b7f1d57f570e4bc5caa6d +Author: Kumar Gala +Date: Tue Jul 28 21:49:52 2009 -0500 + + Update Freescale copyrights to remove "All Rights Reserved" + + "All Rights Reserved" conflicts with the GPL. + + Signed-off-by: Kumar Gala + +commit bb4291e62579dbc611e84eaaf973631e0bf129c7 +Author: Alessandro Rubini +Date: Fri Jul 24 11:27:14 2009 +0200 + + arm nomadik: add i2c + + Signed-off-by: Alessandro Rubini + Acked-by: Andrea Gallo + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 60cbfbfd0fbebb4682f10ba96f622bfe17317598 +Author: Alessandro Rubini +Date: Fri Jul 24 11:27:03 2009 +0200 + + arm nomadik: add gpio support + + Signed-off-by: Alessandro Rubini + Acked-by: Andrea Gallo + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 549b98306d897ae5991362d6096a36df50efe686 +Author: Tom Rix +Date: Sun Jun 28 12:52:32 2009 -0500 + + OMAP3 Remove twl4030 defines + + These defines have been subplanted by the equivelent defines in + include/twl4030.h + + Signed-off-by: Tom Rix + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Heiko Schocher + +commit fccc0fcaaae5154612f8259365d26d04f204859f +Author: Tom Rix +Date: Sun Jun 28 12:52:31 2009 -0500 + + OMAP3 Move twl4030 mmc function + + Because twl4030 now has its own device files, move and rename + twl4030_mmc_config. + + twl4030_mmc_config initializes the twl4030 power setting to + the mmc device. Because it is in the twl4030 power domain, move + it out of drivers/mmc/omap3_mmc.c and into drivers/power/twl4030.c. + + The function was renamed to twl4030_power_mmc_init because all + the functions in this file are to have the format + + twl4030_power__ + + In this case the suffix is mmc_init so + device : mmc + action : init + + Signed-off-by: Tom Rix + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Heiko Schocher + +commit 2c15513010493435c78f83202940ac3be11de2c3 +Author: Tom Rix +Date: Sun Jun 28 12:52:30 2009 -0500 + + OMAP3 Move twl4030 power and led functions + + Because twl4030 now has its own device files, move exiting + omap3 power_init_r to a new location. + + power_init_r is the only function in board/omap3/common. + It initializes the twl4030 power for the board and enables + the led. + + The power part of the the function is moved to twl4030_power_init in + drivers/power/twl4030.c The power compilation is conditional on the + existing config variable CONFIG_TWL4030_POWER. + + The led part is moved to twl4030_led_init in the new file + drivers/misc/twl4030_led.c The led compilation is conditional on + the new config variable CONFIG_TWL4030_LED + + The directory board/omap3/common was removed because power_init_r + was the only function in it. + + Signed-off-by: Tom Rix + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Heiko Schocher + +commit 3cb7a4805fc8fb4c09e4801e1c7d531186f20190 +Author: Wolfgang Denk +Date: Tue Jul 28 22:13:52 2009 +0200 + + TQM8xx* boards: set larger SMC Rx buffer len + + Commit 2b3f12c2 added support for configurable SMC Rx buffer length on + 8xx systems. Enable this feature on TQM8xx* based boards. + + This fixes the problem that pasting text in the middle of a line + (i. e. inserting in edit mode) did not work - only the first two + characters got inserted, the rest was lost. + + Signed-off-by: Wolfgang Denk + +commit 4b7511478b62a539e5b066d19a986b75e5d9a527 +Author: Wolfgang Denk +Date: Tue Jul 28 22:07:37 2009 +0200 + + Fix ext2load return code + + Make the ext2load command return 0 on success (instead of the file + length). + + Also fix output format (get rid of random newlines) and some coding + style issues (long lines etc.). + + Signed-off-by: Wolfgang Denk + +commit 56fdaadc124a8ef9ec0fd8ff578233ec3b1137be +Author: Weirich, Bernhard +Date: Wed Jun 10 14:00:37 2009 +0200 + + ext2: fix inode size and calculations + + Signed-off-by: unsik Kim + Signed-off-by: Bernhard Weirich + Signed-off-by: Wolfgang Denk + Tested-by: Wolfgang Denk + +commit cd7826359ee71e8f6f3d68331930ab9cbe1c990e +Author: Tom Rix +Date: Sun Jun 28 12:52:29 2009 -0500 + + TWL4030 Add power reset button + + The Zoom2 power reset button is on the top right side of the + main board. Press and hold for about to 8 seconds to completely + reset the board. + + Some of the beta boards have a hardware problem that prevents + using this feature. If is difficult to further characterize the + boards that fail. So disable resetting for all beta boards. + + The Zoom1 reset button is the red circle on the top right, + front of the board. Press and hold the button for 8 seconds to + completely reset the board. + + After analyzing beagle, it was determined that other boards + that use the twl4030 for power managment can also make use + this function. + + The resetting is done by the power management part of the twl4030. + Since there is no existing drivers/power, add one. + + The compilation of power/twl4030.h is controlled by the config + variable CONFIG_TWL4030_POWER + + Signed-off-by: Tom Rix + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Heiko Schocher + +commit 8966eb4c1c2d894b2a76174ba904c26c5af815b8 +Author: Tom Rix +Date: Sun Jun 28 12:52:28 2009 -0500 + + TWL4030 Add initial support + + The TWL4030 supplies many peripherals for OMAP3 boards. These include + power management, usb and, keyboard. + + The product description is found here: + + http://focus.ti.com/docs/prod/folders/print/tps65950.html + + Product reference document, tps65950.pdf, is found here: + + http://www.ti.com/lit/gpn/tps65950 + + Signed-off-by: Tom Rix + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Heiko Schocher + +commit 7f79dfb48b7419d5caa1cf932fcff4e2fb7040af +Author: Tom Rix +Date: Sun Jun 28 12:52:27 2009 -0500 + + OMAP I2C Fix the sampling clock. + + This problem is seen on Zoom1 and Zoom2 in the startup and + when i2c probe is used + + Before : + + In: serial + Out: serial + Err: serial + timed out in wait_for_bb: I2C_STAT=1000 + timed out in wait_for_bb: I2C_STAT=1000 + timed out in wait_for_bb: I2C_STAT=1000 + timed out in wait_for_pin: I2C_STAT=1000 + I2C read: I/O error + timed out in wait_for_bb: I2C_STAT=1000 + timed out in wait_for_bb: I2C_STAT=1000 + Die ID #327c00020000000004013ddd05026013 + Hit any key to stop autoboot: 0 + OMAP3 Zoom1# i2c probe + Valid chip addresses:timed out in wait_for_bb: I2C_STAT=1000 + 02 03 04 05 06 07 08 09 0A 0B 0C 0D + + After : + + In: serial + Out: serial + Err: serial + Die ID #327c00020000000004013ddd05026013 + Hit any key to stop autoboot: 0 + OMAP3 Zoom1# i2c probe + Valid chip addresses: 48 49 4A 4B + + The addresses are for the twl4030. + + The prescalar that converts the function clock to the sampling + clock is hardcoded to 0. The reference manual recommends 7 + if the function clock is 96MHz. + + Instead of just changing the hardcoded values, the prescalar + is calculated from the value I2C_IP_CLK. + + The i2c #defines are in kHz. The speed passed into the + i2c init routine is in Hz. To be consistent, change the + defines to be in Hz. + + The timing calculations are based on what is done in the + linux 2.6.30 kernel in drivers/i2c/buses/i2c_omap.c as + apposed to what is done in TRM. + + The major variables in the timing caculations are + specified as #defines that can be overriden as required. + + The variables and their defaults are + + I2C_IP_CLK SYSTEM_CLOCK_96 + I2C_INTERNAL_SAMPLING_CLK 19200000 + I2C_FASTSPEED_SCLL_TRIM 6 + I2C_FASTSPEED_SCLH_TRIM 6 + I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM + I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM + I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM + I2C_HIGHSPEED_PHASE_TWO_SCLH I2C_FASTSPEED_SCLH_TRIM + + This was runtime verified on Zoom1, Zoom2, Beagle and Overo. + The 400kHz and 3.4M cases were verifed on test Zoom1, + Zoom2, Beagle and Overo configurations. + + Testing for omap2 will be done in a second step as Nishanth + and Jean-Christophe commented. + + Signed-off-by: Tom Rix + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Heiko Schocher + +commit 4ce5a72851ff2960543b125866c6132e0094e1ee +Author: Heiko Schocher +Date: Mon Jul 20 09:59:37 2009 +0200 + + arm, i2c: added support for the TWSI I2C Interface + + Signed-off-by: Heiko Schocher + +commit 042d01c72e0ea95731708dd24bb8b6cf42e75c80 +Author: Stefan Roese +Date: Mon Jul 27 09:13:38 2009 +0200 + + ppc4xx: Fix problem with NOR range assignment in Canyonlands ft_board_setup + + This patch fixes the problem, that the current fdt board fixup code only + set's one range, the one for NOR. By this it's overwriting the already + correctly configured values done in __ft_board_setup(). Just remove this + now unneeded NOR fixup and all the ranges are correctly defined. + + Signed-off-by: Stefan Roese + Cc: Dirk Eibach + Cc: Felix Radensky + +commit 11a1604f8d0a8d936b42f6435d004b4aa33a5d87 +Author: Stefan Roese +Date: Mon Jul 27 07:42:48 2009 +0200 + + ppc4xx: Add some NAND-booting bootstrap entries to Kilauea chip_config cmd + + This patch adds some I2C bootstrap setting for NAND booting to the Kilauea + chip_config command ("533-nand" and "600-nand"). + + Additionally some incorrectly indented lines are fixed. + + Signed-off-by: Stefan Roese + +commit 5b34691ff87821891375b28ec5bcf5154575a735 +Author: Stefan Roese +Date: Mon Jul 27 07:42:37 2009 +0200 + + ppc4xx: Kilauea: Fix SDRAM init in NAND booting version + + DDR2 Auto-calibration needs to be disabled on the NAND booting PPC4xx + targets. Otherwise the configured fixed init values for some DDR2 + controller registers (e.g. RQDC) are not initialized at all resulting + in a non working SDRAM. + + Signed-off-by: Stefan Roese + +commit f3ed3c9b7441cde936d06a1ff7b1490ff0d600e6 +Author: Stefan Roese +Date: Mon Jul 27 10:53:43 2009 +0200 + + ppc4xx: Fix Arches DDR2 initialization + + Testing on AMCC Arches with the latest U-Boot version yielded that DDR2 + initialization is currently broken. U-Boot hangs upon relocation to SDRAM + or crashes with random traps. This patch fixes this problem. Arches now + uses a different WRDTR and CLKTR default setting than Canyonlands/Glacier. + + Signed-off-by: Stefan Roese + +commit ab4c62c1ba788bf7f673a985d99a76d9c2fd7eca +Author: Dirk Eibach +Date: Mon Jul 27 08:49:48 2009 +0200 + + ppc4xx: Add GDsys CompactCenter board support. + + Board support for the Guntermann & Drunck CompactCenter and + DevCon-Center. + Based on the AMCC Canyonlands board support by Stefan Roese. + + Signed-off-by: Dirk Eibach + Signed-off-by: Stefan Roese + +commit c2e49f706ba13213f3c8da3a33e88010214e1997 +Author: Reinhard Arlt +Date: Sat Jul 25 06:19:12 2009 +0200 + + mpc83xx: Add esd VME8349 board support + + This patch adds support for the esd VME8349 board equipped with the + MPC8349. It's a VME PMC carrier board equipped with the Tundra + TSI148 VME-bridge. + + Signed-off-by: Reinhard Arlt + Signed-off-by: Stefan Roese + Signed-off-by: Kim Phillips + +commit fe613cdd4eb2c5b257a60d8dfb7759742318c28a +Author: Paul Gortmaker +Date: Thu Jul 23 17:10:55 2009 -0400 + + sbc8349: combine HRCW flash and u-boot image flash + + Up to this point in time, the sbc8349 board was storing the u-boot + image in flash 2x. One for the HRCW value at the beginning of + flash (0xff80_0000), and once close to the end of flash (0xfff8_0000) + for the actual image that got executed. + + This moves the TEXT_BASE to be the beginning of flash, which makes + the second copy of the image redundant, and frees up the flash + from the end of the environment storage to the end of the flash + device itself. + + Signed-off-by: Paul Gortmaker + Signed-off-by: Kim Phillips + +commit be9b56df02168ca97562d6b9ec791136e4cd925a +Author: Kim Phillips +Date: Thu Jul 23 14:09:38 2009 -0500 + + mpc83xx: CONFIG_83XX_GENERIC_PCI is now synonymous with CONFIG_PCI; remove the former + + Signed-off-by: Kim Phillips + +commit 94978e19f31d225b4f7d97c4acbac1ecfaeb8f69 +Author: Wolfgang Denk +Date: Mon Jul 27 10:37:37 2009 +0200 + + Prepare 2009.08-rc1 (again, after fixing last minute issues). + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk + commit 9689ddcca6e01f3637b4442fa8575f29ef4d7aa3 Author: Wolfgang Denk Date: Mon Jul 27 10:06:39 2009 +0200 @@ -2568,6 +3492,102 @@ Date: Mon Jun 15 11:51:47 2009 -0500 Cc: Ron Madrid Cc: Anton Vorontsov +commit 052c08916532d1d9c2f69eb9229709c7b2fc1f02 +Author: TsiChung Liew +Date: Wed Jul 8 07:41:24 2009 +0000 + + ColdFire: Update bootargs + + Add a bootargs for M53017EVB and update bootargs + for M54451EVB + + Signed-off-by: TsiChung Liew + +commit 6e8d58d36691520f8da74cd948661d28d5a5dc66 +Author: TsiChung Liew +Date: Tue Jun 30 14:30:19 2009 +0000 + + Command for accessing serial flash update + + Change strtoul number base of argv 3 from 0 to 16 + + Signed-off-by: TsiChung Liew + +commit ee0a8462466dd284968536eb57c6eef4be0d6aad +Author: TsiChung Liew +Date: Tue Jun 30 14:18:29 2009 +0000 + + ColdFire: Add DSPI support for MCF5227x and MCF5445x + + Remove individual CPU specific DSPI driver. + Add required feature for the common DSPI driver in cpu_init and + in platform configuration file. + + Signed-off-by: TsiChung Liew + +commit dec61c7851baa72151ef1d3657e7bb3b68907d48 +Author: TsiChung Liew +Date: Tue Jun 30 14:09:47 2009 +0000 + + Coldfire: Consolidate DSPI driver + + Unify both MCF5227x and MCF5445x DSPI driver in CPU to + driver/spi folder for common use. + + Signed-off-by: TsiChung Liew + +commit 11d88b26a68bd4bf98b1c962fde6257a50978231 +Author: TsiChung Liew +Date: Fri Jun 12 13:03:34 2009 +0000 + + ColdFire: Remove compiler warning messages + + Remove unused variables and printf type mismatch in + lib_m68k/board.c + + Signed-off-by: TsiChung Liew + +commit 4567c7bff2503fb1a7c738ff9b9f0bd00d274d9a +Author: TsiChung Liew +Date: Fri Jun 12 11:31:31 2009 +0000 + + ColdFire: Fix M53017EVB flash size + + Increase the flash size from 8MB to 16MB + + Signed-off-by: TsiChung Liew + +commit bf9a521529e484b15e8fdb583a607cf7945d2f6b +Author: TsiChung Liew +Date: Fri Jun 12 11:29:00 2009 +0000 + + ColdFire: Add M5208EVB and MCF520x CPU support + + Signed-off-by: TsiChung Liew + +commit 709b384b6493d9726dce20663ebe31bf7cab2925 +Author: TsiChung Liew +Date: Thu Jun 11 15:39:57 2009 +0000 + + ColdFire: Update for M54451EVB + + Update serial boot DRAM's Internal RAM, vector table and DRAM in + start.S, serial flash's read status command over SPI and NOR + flash. + + Signed-off-by: TsiChung Liew + +commit bbf6bbffcaf694c03504c661e58fbd1aefe5bf64 +Author: TsiChung Liew +Date: Thu Jun 11 12:50:05 2009 +0000 + + ColdFire: Update configuration file to use flash buffer write + + Update M52277EVB, M53017EVB and M54455EVB platform configuration + file to use flash buffer write + + Signed-off-by: TsiChung Liew + commit 7d4450a9773673052fcd7fdf0a4a88c089126ac1 Author: Wolfgang Denk Date: Sun Jun 14 20:58:53 2009 +0200 diff --git a/Makefile b/Makefile index 54c0b67..329e0f5 100644 --- a/Makefile +++ b/Makefile @@ -24,7 +24,7 @@ VERSION = 2009 PATCHLEVEL = 08 SUBLEVEL = -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else -- cgit v1.1