From e7a773a0bcceb130e441398d8bc97febacb0d499 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 12 Jun 2016 23:30:13 -0600 Subject: dm: mmc: dwmmc: Add comments to the dwmmc setup functions These comments were missed when the original code was written. Add them to help people port their drivers over. Signed-off-by: Simon Glass --- include/dwmmc.h | 64 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/include/dwmmc.h b/include/dwmmc.h index 335af51..0199def 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -224,9 +224,73 @@ static inline u8 dwmci_readb(struct dwmci_host *host, int reg) return readb(host->ioaddr + reg); } +#ifdef CONFIG_BLK +/** + * dwmci_setup_cfg() - Set up the configuration for DWMMC + * + * This is used to set up a DWMMC device when you are using CONFIG_BLK. + * + * This should be called from your MMC driver's probe() method once you have + * the information required. + * + * Generally your driver will have a platform data structure which holds both + * the configuration (struct mmc_config) and the MMC device info (struct mmc). + * For example: + * + * struct rockchip_mmc_plat { + * struct mmc_config cfg; + * struct mmc mmc; + * }; + * + * ... + * + * Inside U_BOOT_DRIVER(): + * .platdata_auto_alloc_size = sizeof(struct rockchip_mmc_plat), + * + * To access platform data: + * struct rockchip_mmc_plat *plat = dev_get_platdata(dev); + * + * See rockchip_dw_mmc.c for an example. + * + * @cfg: Configuration structure to fill in (generally &plat->mmc) + * @name: Device name (normally dev->name) + * @buswidth: Bus width (in bits, such as 4 or 8) + * @caps: Host capabilities (MMC_MODE_...) + * @max_clk: Maximum supported clock speed in HZ (e.g. 400000) + * @min_clk: Minimum supported clock speed in HZ (e.g. 150000000) + */ void dwmci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, uint caps, u32 max_clk, u32 min_clk); + +/** + * dwmci_bind() - Set up a new MMC block device + * + * This is used to set up a DWMMC block device when you are using CONFIG_BLK. + * It should be called from your driver's bind() method. + * + * See rockchip_dw_mmc.c for an example. + * + * @dev: Device to set up + * @mmc: Pointer to mmc structure (normally &plat->mmc) + * @cfg: Empty configuration structure (generally &plat->cfg). This is + * normally all zeroes at this point. The only purpose of passing + * this in is to set mmc->cfg to it. + * @return 0 if OK, -ve if the block device could not be created + */ int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); +#else +/** + * add_dwmci() - Add a new DWMMC interface + * + * This is used when you are not using CONFIG_BLK. Convert your driver over! + * + * @host: DWMMC host structure + * @max_clk: Maximum supported clock speed in HZ (e.g. 400000) + * @min_clk: Minimum supported clock speed in HZ (e.g. 150000000) + * @return 0 if OK, -ve on error + */ int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk); +#endif /* !CONFIG_BLK */ + #endif /* __DWMMC_HW_H */ -- cgit v1.1