From d2192a3909be8ab9433082e7c04c917489b28e25 Mon Sep 17 00:00:00 2001 From: Ye Li Date: Tue, 13 Dec 2016 15:33:41 +0800 Subject: MLK-13602-3 mx6ullevk/arm2: Enable module fuse checking for mx6ull boards Enable the module disable fuse checking configurations, and ENET fuse checking during ENET setup. Signed-off-by: Ye Li Tested-by: Bai Ping --- board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c | 5 +++++ board/freescale/mx6ullevk/mx6ullevk.c | 6 ++++++ include/configs/mx6ull_ddr3_arm2.h | 3 +++ include/configs/mx6ullevk.h | 3 +++ 4 files changed, 17 insertions(+) diff --git a/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c b/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c index 58c354d..8cfe2e3 100644 --- a/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c +++ b/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c @@ -784,6 +784,8 @@ static int setup_fec(int fec_id) int ret; if (0 == fec_id) { + if (check_module_fused(MX6_MODULE_ENET1)) + return -1; /* * Use 50M anatop loopback REF_CLK1 for ENET1, * clear gpr1[13], set gpr1[17] @@ -795,6 +797,9 @@ static int setup_fec(int fec_id) return ret; } else { + if (check_module_fused(MX6_MODULE_ENET2)) + return -1; + /* clk from phy, set gpr1[14], clear gpr1[18]*/ clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], IOMUX_GPR1_FEC2_MASK, IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK); diff --git a/board/freescale/mx6ullevk/mx6ullevk.c b/board/freescale/mx6ullevk/mx6ullevk.c index fcb1090..d0b0496 100644 --- a/board/freescale/mx6ullevk/mx6ullevk.c +++ b/board/freescale/mx6ullevk/mx6ullevk.c @@ -689,6 +689,9 @@ static int setup_fec(int fec_id) int ret; if (fec_id == 0) { + if (check_module_fused(MX6_MODULE_ENET1)) + return -1; + /* * Use 50M anatop loopback REF_CLK1 for ENET1, * clear gpr1[13], set gpr1[17]. @@ -696,6 +699,9 @@ static int setup_fec(int fec_id) clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK); } else { + if (check_module_fused(MX6_MODULE_ENET2)) + return -1; + /* * Use 50M anatop loopback REF_CLK2 for ENET2, * clear gpr1[14], set gpr1[18]. diff --git a/include/configs/mx6ull_ddr3_arm2.h b/include/configs/mx6ull_ddr3_arm2.h index 9325d33..216c1e4 100644 --- a/include/configs/mx6ull_ddr3_arm2.h +++ b/include/configs/mx6ull_ddr3_arm2.h @@ -126,4 +126,7 @@ #define CONFIG_WAVEFORM_BUF_SIZE 0x400000 #endif +#define CONFIG_MODULE_FUSE +#define CONFIG_OF_SYSTEM_SETUP + #endif diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index ad8afad..2c72687 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -368,6 +368,9 @@ #define CONFIG_IOMUX_LPSR +#define CONFIG_MODULE_FUSE +#define CONFIG_OF_SYSTEM_SETUP + #if defined(CONFIG_ANDROID_SUPPORT) #include "mx6ullevk_android.h" #endif -- cgit v1.1