From cb5965fb95b77a49f4e6af95248e0c849f4af03e Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 31 May 2006 12:44:44 -0500 Subject: White space cleanup. Some 80-column cleanups. Convert printf() to puts() where possible. Use #include "spd_sdram.h" as needed. Enhanced reset command usage message a bit. Signed-off-by: Jon Loeliger --- board/mpc8641hpcn/mpc8641hpcn.c | 227 +++++++++++++++++++++------------------- cpu/mpc86xx/cpu.c | 27 +++-- 2 files changed, 130 insertions(+), 124 deletions(-) diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c index 0b08df2..5cd3e97 100644 --- a/board/mpc8641hpcn/mpc8641hpcn.c +++ b/board/mpc8641hpcn/mpc8641hpcn.c @@ -38,12 +38,13 @@ extern void ft_cpu_setup(void *blob, bd_t *bd); #include "pixis.h" - #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); #endif -extern long int spd_sdram(void); +#if defined(CONFIG_SPD_EEPROM) +#include "spd_sdram.h" +#endif void sdram_init(void); long int fixed_sdram(void); @@ -51,7 +52,7 @@ long int fixed_sdram(void); int board_early_init_f (void) { - return 0; + return 0; } int checkboard (void) @@ -60,34 +61,32 @@ int checkboard (void) #ifdef CONFIG_PCI - volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; - volatile ccsr_gur_t *gur = &immap->im_gur; - volatile ccsr_pex_t *pex1 = &immap->im_pex1; - - uint devdisr = gur->devdisr; - uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16; - uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17; - uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); - - - if ((io_sel==2 || io_sel==3 || io_sel==5 \ - || io_sel==6 || io_sel==7 || io_sel==0xF) - && !(devdisr & MPC86xx_DEVDISR_PCIEX1)){ - debug ("PCI-EXPRESS 1: %s \n", - pex1_agent ? "Agent" : "Host"); - debug("0x%08x=0x%08x ", &pex1->pme_msg_det,pex1->pme_msg_det); - if (pex1->pme_msg_det) { - pex1->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x", - pex1->pme_msg_det); - } - debug ("\n"); - } else { - printf ("PCI-EXPRESS 1: Disabled\n"); - } + volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; + volatile ccsr_gur_t *gur = &immap->im_gur; + volatile ccsr_pex_t *pex1 = &immap->im_pex1; + + uint devdisr = gur->devdisr; + uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16; + uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17; + uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); + + if ((io_sel == 2 || io_sel == 3 || io_sel == 5 + || io_sel == 6 || io_sel == 7 || io_sel == 0xF) + && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { + debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host"); + debug("0x%08x=0x%08x ", &pex1->pme_msg_det, pex1->pme_msg_det); + if (pex1->pme_msg_det) { + pex1->pme_msg_det = 0xffffffff; + debug(" with errors. Clearing. Now 0x%08x", + pex1->pme_msg_det); + } + debug ("\n"); + } else { + puts("PCI-EXPRESS 1: Disabled\n"); + } #else - printf("PCI-EXPRESS1: Disabled\n"); + puts("PCI-EXPRESS1: Disabled\n"); #endif return 0; @@ -98,7 +97,6 @@ long int initdram(int board_type) { long dram_size = 0; - extern long spd_sdram (void); #if defined(CONFIG_SPD_EEPROM) dram_size = spd_sdram (); @@ -110,7 +108,7 @@ initdram(int board_type) puts(" DDR: "); return dram_size; #endif - + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* * Initialize and enable DDR ECC. @@ -130,7 +128,7 @@ int testdram(void) uint *pend = (uint *) CFG_MEMTEST_END; uint *p; - printf("SDRAM test phase 1:\n"); + puts("SDRAM test phase 1:\n"); for (p = pstart; p < pend; p++) *p = 0xaaaaaaaa; @@ -141,7 +139,7 @@ int testdram(void) } } - printf("SDRAM test phase 2:\n"); + puts("SDRAM test phase 2:\n"); for (p = pstart; p < pend; p++) *p = 0x55555555; @@ -152,7 +150,7 @@ int testdram(void) } } - printf("SDRAM test passed.\n"); + puts("SDRAM test passed.\n"); return 0; } #endif @@ -177,9 +175,9 @@ long int fixed_sdram(void) ddr->sdram_mode_1 = CFG_DDR_MODE_1; ddr->sdram_mode_2 = CFG_DDR_MODE_2; ddr->sdram_interval = CFG_DDR_INTERVAL; - ddr->sdram_data_init = CFG_DDR_DATA_INIT; + ddr->sdram_data_init = CFG_DDR_DATA_INIT; ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL; - ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL; + ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL; ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS; #if defined (CONFIG_DDR_ECC) @@ -187,7 +185,7 @@ long int fixed_sdram(void) ddr->err_sbe = 0x00ff0000; #endif asm("sync;isync"); - + udelay(500); #if defined (CONFIG_DDR_ECC) @@ -198,7 +196,7 @@ long int fixed_sdram(void) ddr->sdram_cfg_2 = CFG_DDR_CONTROL2; #endif asm("sync; isync"); - + udelay(500); #endif return CFG_SDRAM_SIZE * 1024 * 1024; @@ -251,13 +249,12 @@ ft_board_setup(void *blob, bd_t *bd) int len; ft_cpu_setup(blob, bd); - + p = ft_get_prop(blob, "/memory/reg", &len); if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } - } #endif @@ -269,86 +266,96 @@ mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ulong val; ulong corepll; - if (argc > 1) { - cmd = argv[1][1]; - switch (cmd) { - case 'f': /* reset with frequency changed */ - if (argc < 5) - goto my_usage; - read_from_px_regs(0); + /* + * No args is a simple reset request. + */ + if (argv <= 0) { + out8(PIXIS_BASE + PIXIS_RST, 0); + /* not reached */ + } + + cmd = argv[1][1]; + switch (cmd) { + case 'f': /* reset with frequency changed */ + if (argc < 5) + goto my_usage; + read_from_px_regs(0); + + val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10)); + + corepll = strfractoint(argv[3]); + val = val + set_px_corepll(corepll); + val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10)); + if (val == 3) { + puts("Setting registers VCFGEN0 and VCTL\n"); + read_from_px_regs(1); + puts("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n"); + set_px_go(); + } else + goto my_usage; - val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10)); + while (1); /* Not reached */ - corepll = strfractoint(argv[3]); + case 'l': + if (argv[2][1] == 'f') { + read_from_px_regs(0); + read_from_px_regs_altbank(0); + /* reset with frequency changed */ + val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10)); + + corepll = strfractoint(argv[4]); val = val + set_px_corepll(corepll); - val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10)); + val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10)); if (val == 3) { - printf("Setting registers VCFGEN0 and VCTL\n"); + puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n"); + set_altbank(); read_from_px_regs(1); - printf("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n"); - set_px_go(); + read_from_px_regs_altbank(1); + puts("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n"); + set_px_go_with_watchdog(); } else goto my_usage; - while (1); /* Not reached */ - - case 'l': - if (argv[2][1] == 'f') { - read_from_px_regs(0); - read_from_px_regs_altbank(0); - /* reset with frequency changed */ - val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10)); - - corepll = strfractoint(argv[4]); - val = val + set_px_corepll(corepll); - val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10)); - if (val == 3) { - printf("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n"); - set_altbank(); - read_from_px_regs(1); - read_from_px_regs_altbank(1); - printf("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n"); - set_px_go_with_watchdog(); - } else - goto my_usage; - - while(1); /* Not reached */ - - } else if(argv[2][1] == 'd'){ - /* Reset from next bank without changing frequencies but with watchdog timer enabled */ - read_from_px_regs(0); - read_from_px_regs_altbank(0); - printf("Setting registers VCFGEN1, VBOOT, and VCTL\n"); - set_altbank(); - read_from_px_regs_altbank(1); - printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n"); - set_px_go_with_watchdog(); - while(1); /* Not reached */ - - } else { - /* Reset from next bank without changing frequency and without watchdog timer enabled */ - read_from_px_regs(0); - read_from_px_regs_altbank(0); - if(argc > 2) - goto my_usage; - printf("Setting registers VCFGNE1, VBOOT, and VCTL\n"); - set_altbank(); - read_from_px_regs_altbank(1); - printf("Resetting board to boot from the other bank....\n"); - set_px_go(); - } + while(1); /* Not reached */ - default: - goto my_usage; + } else if(argv[2][1] == 'd'){ + /* + * Reset from alternate bank without changing + * frequencies but with watchdog timer enabled. + */ + read_from_px_regs(0); + read_from_px_regs_altbank(0); + puts("Setting registers VCFGEN1, VBOOT, and VCTL\n"); + set_altbank(); + read_from_px_regs_altbank(1); + puts("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n"); + set_px_go_with_watchdog(); + while(1); /* Not reached */ + + } else { + /* + * Reset from next bank without changing + * frequency and without watchdog timer enabled. + */ + read_from_px_regs(0); + read_from_px_regs_altbank(0); + if(argc > 2) + goto my_usage; + puts("Setting registers VCFGNE1, VBOOT, and VCTL\n"); + set_altbank(); + read_from_px_regs_altbank(1); + puts("Resetting board to boot from the other bank....\n"); + set_px_go(); } - my_usage: - printf("\nUsage: reset cf \n"); - printf(" reset altbank [cf ]\n"); - printf("For example: reset cf 40 2.5 10\n"); - printf("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n"); - return; + default: + goto my_usage; + } - } else - out8(PIXIS_BASE+PIXIS_RST,0); + my_usage: + puts("\nUsage: reset cf \n"); + puts(" reset altbank [cf ]\n"); + puts(" reset altbank [wd]\n"); + puts("For example: reset cf 40 2.5 10\n"); + puts("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n"); } diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index 60ce29c..fc77d99 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -1,6 +1,6 @@ /* - * Copyright 2004 Freescale Semiconductor - * Jeff Brown (jeffrey@freescale.com) + * Copyright 2006 Freescale Semiconductor + * Jeff Brown * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -55,8 +55,7 @@ int checkcpu (void) minor = PVR_MIN(pvr); puts("CPU:\n"); - - printf(" Core: "); + puts(" Core: "); switch (ver) { case PVR_VER(PVR_86xx): @@ -112,11 +111,11 @@ int checkcpu (void) printf(" LBC: unknown (lcrr: 0x%08x)\n", lcrr); } - printf(" L2: "); + puts(" L2: "); if (get_l2cr() & 0x80000000) - printf("Enabled\n"); + puts("Enabled\n"); else - printf("Disabled\n"); + puts("Disabled\n"); return 0; } @@ -125,7 +124,6 @@ int checkcpu (void) static inline void soft_restart(unsigned long addr) { - #ifndef CONFIG_MPC8641HPCN /* SRR0 has system reset vector, SRR1 has default MSR value */ @@ -137,8 +135,11 @@ soft_restart(unsigned long addr) __asm__ __volatile__ ("rfi"); #else /* CONFIG_MPC8641HPCN */ - out8(PIXIS_BASE+PIXIS_RST,0); + + out8(PIXIS_BASE + PIXIS_RST, 0); + #endif /* !CONFIG_MPC8641HPCN */ + while(1); /* not reached */ } @@ -149,10 +150,10 @@ soft_restart(unsigned long addr) void do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - ulong addr; +#ifndef CONFIG_MPC8641HPCN #ifdef CFG_RESET_ADDRESS - addr = CFG_RESET_ADDRESS; + ulong addr = CFG_RESET_ADDRESS; #else /* * note: when CFG_MONITOR_BASE points to a RAM address, @@ -160,11 +161,9 @@ do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) * address. Better pick an address known to be invalid on your * system and assign it to CFG_RESET_ADDRESS. */ - addr = CFG_MONITOR_BASE - sizeof (ulong); + ulong addr = CFG_MONITOR_BASE - sizeof(ulong); #endif -#ifndef CONFIG_MPC8641HPCN - /* flush and disable I/D cache */ __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3"); __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5"); -- cgit v1.1