From c5fb70c9114bd0a8289444d3d5c7e360eda08232 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Fri, 5 Feb 2010 15:13:58 +0100 Subject: Add initial support for Freescale mx51evk board The patch adds initial support for the Freescale mx51evk board. Network (FEC) and SD controller (fsl_esdhc) are supported. Signed-off-by: Stefano Babic Signed-off-by: Fred Fan --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 4 + board/freescale/mx51evk/Makefile | 48 +++++ board/freescale/mx51evk/config.mk | 25 +++ board/freescale/mx51evk/imximage.cfg | 119 ++++++++++ board/freescale/mx51evk/mx51evk.c | 406 +++++++++++++++++++++++++++++++++++ board/freescale/mx51evk/mx51evk.h | 51 +++++ include/configs/mx51evk.h | 172 +++++++++++++++ 9 files changed, 830 insertions(+) create mode 100644 board/freescale/mx51evk/Makefile create mode 100644 board/freescale/mx51evk/config.mk create mode 100644 board/freescale/mx51evk/imximage.cfg create mode 100644 board/freescale/mx51evk/mx51evk.c create mode 100644 board/freescale/mx51evk/mx51evk.h create mode 100644 include/configs/mx51evk.h diff --git a/MAINTAINERS b/MAINTAINERS index dd1579e..160f580 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -150,6 +150,10 @@ Dave Ellis SXNI855T MPC8xx +Fred Fan + + mx51evk i.MX51 + Thomas Frieden AmigaOneG3SE MPC7xx diff --git a/MAKEALL b/MAKEALL index 6ddf7e0..a800310 100755 --- a/MAKEALL +++ b/MAKEALL @@ -633,6 +633,7 @@ LIST_ARM11=" \ ######################################################################### LIST_ARM_CORTEX_A8=" \ devkit8000 \ + mx51evk \ omap3_beagle \ omap3_overo \ omap3_evm \ diff --git a/Makefile b/Makefile index 16b549c..ca399db 100644 --- a/Makefile +++ b/Makefile @@ -3300,6 +3300,9 @@ mx31pdk_nand_config : unconfig fi @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 +mx51evk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51 + omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx @@ -3771,6 +3774,7 @@ clobber: clean $(obj)cscope.* $(obj)*.*~ @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) @rm -f $(obj)u-boot.kwb + @rm -f $(obj)u-boot.imx @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} @rm -f $(obj)cpu/mpc824x/bedbug_603e.c @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm diff --git a/board/freescale/mx51evk/Makefile b/board/freescale/mx51evk/Makefile new file mode 100644 index 0000000..eb12fc5 --- /dev/null +++ b/board/freescale/mx51evk/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski +# +# (C) Copyright 2009 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := mx51evk.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mx51evk/config.mk b/board/freescale/mx51evk/config.mk new file mode 100644 index 0000000..c8279ec --- /dev/null +++ b/board/freescale/mx51evk/config.mk @@ -0,0 +1,25 @@ +# +# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +LDSCRIPT = cpu/$(CPU)/$(SOC)/u-boot.lds +TEXT_BASE = 0x97800000 +IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg new file mode 100644 index 0000000..db09913 --- /dev/null +++ b/board/freescale/mx51evk/imximage.cfg @@ -0,0 +1,119 @@ +# +# (C Copyright 2009 +# Stefano Babic DENX Software Engineering sbabic@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not write to the Free Software +# Foundation Inc. 51 Franklin Street Fifth Floor Boston, +# MA 02110-1301 USA +# +# Refer docs/README.imxmage for more details about how-to configure +# and create imximage boot image +# +# The syntax is taken as close as possible with the kwbimage + +# Boot Device : one of +# spi_flash, nand, onenand, sd_card + +BOOT_FROM spi + +# Device Configuration Data (DCD) +# +# Each entry must have the format: +# Addr-type Address Value +# +# where: +# Addr-type register length (1,2 or 4 bytes) +# Address absolute address of the register +# value value to be stored in the register + +# Setting IOMUXC +DATA 4 0x73FA88a0 0x200 +DATA 4 0x73FA850c 0x20c5 +DATA 4 0x73FA8510 0x20c5 +DATA 4 0x73FA883c 0x2 +DATA 4 0x73FA8848 0x2 +DATA 4 0x73FA84b8 0xe7 +DATA 4 0x73FA84bc 0x45 +DATA 4 0x73FA84c0 0x45 +DATA 4 0x73FA84c4 0x45 +DATA 4 0x73FA84c8 0x45 +DATA 4 0x73FA8820 0x0 +DATA 4 0x73FA84a4 0x3 +DATA 4 0x73FA84a8 0x3 +DATA 4 0x73FA84ac 0xe3 +DATA 4 0x73FA84b0 0xe3 +DATA 4 0x73FA84b4 0xe3 +DATA 4 0x73FA84cc 0xe3 +DATA 4 0x73FA84d0 0xe2 + +DATA 4 0x73FA882c 0x6 +DATA 4 0x73FA88a4 0x6 +DATA 4 0x73FA88ac 0x6 +DATA 4 0x73FA88b8 0x6 + +# Setting DDR for micron +# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model +# CAS=3 BL=4 +# ESDCTL_ESDCTL0 +DATA 4 0x83FD9000 0x82a20000 +# ESDCTL_ESDCTL1 +DATA 4 0x83FD9008 0x82a20000 +# ESDCTL_ESDMISC +DATA 4 0x83FD9010 0x000ad0d0 +# ESDCTL_ESDCFG0 +DATA 4 0x83FD9004 0x333574aa +# ESDCTL_ESDCFG1 +DATA 4 0x83FD900C 0x333574aa + +# Init DRAM on CS0 +# ESDCTL_ESDSCR +DATA 4 0x83FD9014 0x04008008 +DATA 4 0x83FD9014 0x0000801a +DATA 4 0x83FD9014 0x0000801b +DATA 4 0x83FD9014 0x00448019 +DATA 4 0x83FD9014 0x07328018 +DATA 4 0x83FD9014 0x04008008 +DATA 4 0x83FD9014 0x00008010 +DATA 4 0x83FD9014 0x00008010 +DATA 4 0x83FD9014 0x06328018 +DATA 4 0x83FD9014 0x03808019 +DATA 4 0x83FD9014 0x00408019 +DATA 4 0x83FD9014 0x00008000 + +# Init DRAM on CS1 +DATA 4 0x83FD9014 0x0400800c +DATA 4 0x83FD9014 0x0000801e +DATA 4 0x83FD9014 0x0000801f +DATA 4 0x83FD9014 0x0000801d +DATA 4 0x83FD9014 0x0732801c +DATA 4 0x83FD9014 0x0400800c +DATA 4 0x83FD9014 0x00008014 +DATA 4 0x83FD9014 0x00008014 +DATA 4 0x83FD9014 0x0632801c +DATA 4 0x83FD9014 0x0380801d +DATA 4 0x83FD9014 0x0040801d +DATA 4 0x83FD9014 0x00008004 + +# Write to CTL0 +DATA 4 0x83FD9000 0xb2a20000 +# Write to CTL1 +DATA 4 0x83FD9008 0xb2a20000 +# ESDMISC +DATA 4 0x83FD9010 0x000ad6d0 +#ESDCTL_ESDCDLYGD +DATA 4 0x83FD9034 0x90000000 +DATA 4 0x83FD9014 0x00000000 diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c new file mode 100644 index 0000000..df0e8ed --- /dev/null +++ b/board/freescale/mx51evk/mx51evk.c @@ -0,0 +1,406 @@ +/* + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "mx51evk.h" + +DECLARE_GLOBAL_DATA_PTR; + +static u32 system_rev; +struct io_board_ctrl *mx51_io_board; + +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg esdhc_cfg[2] = { + {MMC_SDHC1_BASE_ADDR, 1, 1}, + {MMC_SDHC2_BASE_ADDR, 1, 1}, +}; +#endif + +u32 get_board_rev(void) +{ + return system_rev; +} + +static inline void set_board_rev(int rev) +{ + system_rev |= (rev & 0xF) << 8; +} + +inline int is_soc_rev(int rev) +{ + return (system_rev & 0xFF) - rev; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); + return 0; +} + +static void setup_iomux_uart(void) +{ + unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | + PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; + + mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); + mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); +} + +static void setup_expio(void) +{ + u32 reg; + struct weim *pweim = (struct weim *)WEIM_BASE_ADDR; + struct clkctl *pclkctl = (struct clkctl *)CCM_BASE_ADDR; + + /* CS5 setup */ + mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT0); + writel(0x00410089, &pweim[5].csgcr1); + writel(0x00000002, &pweim[5].csgcr2); + + /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */ + writel(0x32260000, &pweim[5].csrcr1); + + /* APR = 0 */ + writel(0x00000000, &pweim[5].csrcr2); + + /* + * WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, WEN=0, + * WCSA=0, WCSN=0 + */ + writel(0x72080F00, &pweim[5].cswcr1); + + mx51_io_board = (struct io_board_ctrl *)(CS5_BASE_ADDR + + IO_BOARD_OFFSET); + if ((readw(&mx51_io_board->id1) == 0xAAAA) && + (readw(&mx51_io_board->id2) == 0x5555)) { + if (is_soc_rev(CHIP_REV_2_0) < 0) { + reg = readl(&pclkctl->cbcdr); + reg = (reg & (~0x70000)) | 0x30000; + writel(reg, &pclkctl->cbcdr); + /* make sure divider effective */ + while (readl(&pclkctl->cdhipr) != 0) + ; + writel(0x0, &pclkctl->ccdr); + } + } else { + /* CS1 */ + writel(0x00410089, &pweim[1].csgcr1); + writel(0x00000002, &pweim[1].csgcr2); + /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */ + writel(0x32260000, &pweim[1].csrcr1); + /* APR=0 */ + writel(0x00000000, &pweim[1].csrcr2); + /* + * WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, + * WEN=0, WCSA=0, WCSN=0 + */ + writel(0x72080F00, &pweim[1].cswcr1); + mx51_io_board = (struct io_board_ctrl *)(CS1_BASE_ADDR + + IO_BOARD_OFFSET); + } + + /* Reset interrupt status reg */ + writew(0x1F, &(mx51_io_board->int_rest)); + writew(0x00, &(mx51_io_board->int_rest)); + writew(0xFFFF, &(mx51_io_board->int_mask)); + + /* Reset the XUART and Ethernet controllers */ + reg = readw(&(mx51_io_board->sw_reset)); + reg |= 0x9; + writew(reg, &(mx51_io_board->sw_reset)); + reg &= ~0x9; + writew(reg, &(mx51_io_board->sw_reset)); +} + +static void setup_iomux_fec(void) +{ + /*FEC_MDIO*/ + mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD); + + /*FEC_MDC*/ + mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004); + + /* FEC RDATA[3] */ + mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180); + + /* FEC RDATA[2] */ + mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180); + + /* FEC RDATA[1] */ + mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180); + + /* FEC RDATA[0] */ + mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180); + + /* FEC TDATA[3] */ + mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004); + + /* FEC TDATA[2] */ + mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004); + + /* FEC TDATA[1] */ + mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004); + + /* FEC TDATA[0] */ + mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004); + + /* FEC TX_EN */ + mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004); + + /* FEC TX_ER */ + mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004); + + /* FEC TX_CLK */ + mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180); + + /* FEC TX_COL */ + mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180); + + /* FEC RX_CLK */ + mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180); + + /* FEC RX_CRS */ + mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180); + + /* FEC RX_ER */ + mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180); + + /* FEC RX_DV */ + mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180); +} + +#ifdef CONFIG_FSL_ESDHC +int board_mmc_getcd(u8 *cd, struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + + if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) + *cd = readl(GPIO1_BASE_ADDR) & 0x01; + else + *cd = readl(GPIO1_BASE_ADDR) & 0x40; + + return 0; +} + +int board_mmc_init(bd_t *bis) +{ + u32 index; + s32 status = 0; + + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; + index++) { + switch (index) { + case 0: + mxc_request_iomux(MX51_PIN_SD1_CMD, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD1_CLK, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD1_DATA0, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD1_DATA1, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD1_DATA2, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD1_DATA3, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_SD1_CMD, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD1_CLK, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_NONE | PAD_CTL_47K_PU | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_GPIO1_0, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_GPIO1_0, + PAD_CTL_HYS_ENABLE); + mxc_request_iomux(MX51_PIN_GPIO1_1, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_GPIO1_1, + PAD_CTL_HYS_ENABLE); + break; + case 1: + mxc_request_iomux(MX51_PIN_SD2_CMD, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD2_CLK, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD2_DATA0, + IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_SD2_DATA1, + IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_SD2_DATA2, + IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_SD2_DATA3, + IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD2_CMD, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | + PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD2_CLK, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | + PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD2_DATA0, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | + PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD2_DATA1, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | + PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD2_DATA2, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | + PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD2_DATA3, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | + PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_SD2_CMD, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_GPIO1_6, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_GPIO1_6, + PAD_CTL_HYS_ENABLE); + mxc_request_iomux(MX51_PIN_GPIO1_5, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_GPIO1_5, + PAD_CTL_HYS_ENABLE); + break; + default: + printf("Warning: you configured more ESDHC controller" + "(%d) as supported by the board(2)\n", + CONFIG_SYS_FSL_ESDHC_NUM); + return status; + } + status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]); + } + return status; +} +#endif + +int board_init(void) +{ + system_rev = get_cpu_rev(); + + gd->bd->bi_arch_number = MACH_TYPE_MX51_BABBAGE; + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + setup_iomux_uart(); + setup_expio(); + setup_iomux_fec(); + return 0; +} + +int checkboard(void) +{ + puts("Board: MX51EVK "); + + switch (system_rev & 0xff) { + case CHIP_REV_3_0: + puts("3.0 ["); + break; + case CHIP_REV_2_5: + puts("2.5 ["); + break; + case CHIP_REV_2_0: + puts("2.0 ["); + break; + case CHIP_REV_1_1: + puts("1.1 ["); + break; + case CHIP_REV_1_0: + default: + puts("1.0 ["); + break; + } + + switch (__raw_readl(SRC_BASE_ADDR + 0x8)) { + case 0x0001: + puts("POR"); + break; + case 0x0009: + puts("RST"); + break; + case 0x0010: + case 0x0011: + puts("WDOG"); + break; + default: + puts("unknown"); + } + puts("]\n"); + return 0; +} + diff --git a/board/freescale/mx51evk/mx51evk.h b/board/freescale/mx51evk/mx51evk.h new file mode 100644 index 0000000..524cdcc --- /dev/null +++ b/board/freescale/mx51evk/mx51evk.h @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BOARD_FREESCALE_MX51_EVK_H__ +#define __BOARD_FREESCALE_MX51_EVK_H__ + +#ifndef __ASSEMBLY__ +struct io_board_ctrl { + u16 led_ctrl; /* 0x00 */ + u16 resv1[0x03]; + u16 sb_stat; /* 0x08 */ + u16 resv2[0x03]; + u16 int_stat; /* 0x10 */ + u16 resv3[0x07]; + u16 int_rest; /* 0x20 */ + u16 resv4[0x0B]; + u16 int_mask; /* 0x38 */ + u16 resv5[0x03]; + u16 id1; /* 0x40 */ + u16 resv6[0x03]; + u16 id2; /* 0x48 */ + u16 resv7[0x03]; + u16 version; /* 0x50 */ + u16 resv8[0x03]; + u16 id3; /* 0x58 */ + u16 resv9[0x03]; + u16 sw_reset; /* 0x60 */ +}; +#endif + +#define IO_BOARD_OFFSET (0x20000) +#endif diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h new file mode 100644 index 0000000..903fe6d --- /dev/null +++ b/include/configs/mx51evk.h @@ -0,0 +1,172 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX51EVK Board + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + + /* High Level Configuration Options */ + +#define CONFIG_MX51 /* in a mx51 */ +#define CONFIG_SKIP_RELOCATE_UBOOT + +#define CONFIG_MX51_HCLK_FREQ 24000000 /* RedBoot says 26MHz */ +#define CONFIG_MX51_CLK32 32768 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_L2_OFF + +/* + * Disabled for now due to build problems under Debian and a significant + * increase in the final file size: 144260 vs. 109536 Bytes. + */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX51_UART1 + +/* + * MMC Configs + * */ +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 2 + +#define CONFIG_MMC + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* + * Eth Configs + */ +#define CONFIG_HAS_ETH1 +#define CONFIG_NET_MULTI +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY + +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE FEC_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x1F + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_PRIME "FEC0" + +#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot_addr=0xa0000000\0" \ + "uboot=u-boot.bin\0" \ + "loadaddr=0x90800000\0" \ + "bootargs_base=setenv bootargs console=tty "\ + "console=ttymxc0,${baudrate}\0"\ + "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_nfs; " \ + "tftpboot ${loadaddr} ${kernel}; bootm\0" + +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "MX51EVK U-Boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x90000000 +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_CMDLINE_EDITING + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_IS_NOWHERE + +#endif -- cgit v1.1