From b36bd6175bccc76102831d1110519c6e41a1d7c6 Mon Sep 17 00:00:00 2001 From: Wig C Date: Fri, 4 Dec 2015 17:46:23 +0800 Subject: MA-9190 Add pico-imx7d board support Ethnet is not supported in uboot. But ethnet on kernel relay the config in uboot. Once ethnet on kernel is indepedent, will remove ethnet code in uboot. Change-Id: If44705d2fbfc1c596cbce010ff7106fcd7556b9f --- arch/arm/Kconfig | 5 + board/technexion/pico-imx7d/Kconfig | 15 + board/technexion/pico-imx7d/MAINTAINERS | 6 + board/technexion/pico-imx7d/Makefile | 10 + board/technexion/pico-imx7d/imximage.cfg | 116 ++++++ board/technexion/pico-imx7d/pico-imx7d.c | 676 +++++++++++++++++++++++++++++++ board/technexion/pico-imx7d/plugin.S | 227 +++++++++++ configs/pico-imx7d_defconfig | 7 + include/configs/pico-imx7d.h | 445 ++++++++++++++++++++ 9 files changed, 1507 insertions(+) create mode 100644 board/technexion/pico-imx7d/Kconfig create mode 100644 board/technexion/pico-imx7d/MAINTAINERS create mode 100644 board/technexion/pico-imx7d/Makefile create mode 100644 board/technexion/pico-imx7d/imximage.cfg create mode 100755 board/technexion/pico-imx7d/pico-imx7d.c create mode 100755 board/technexion/pico-imx7d/plugin.S create mode 100644 configs/pico-imx7d_defconfig create mode 100755 include/configs/pico-imx7d.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6ddae25..cbfc19d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -564,6 +564,10 @@ config TARGET_MX7DSABRESD bool "Support mx7dsabresd" select CPU_V7 +config TARGET_PICO_IMX7D + bool "Support pico-imx7d" + select CPU_V7 + config TARGET_MX6UL_14X14_EVK bool "Support mx6ul_14x14_evk" select CPU_V7 @@ -885,6 +889,7 @@ source "board/freescale/mx7d_12x12_ddr3_arm2/Kconfig" source "board/freescale/mx7d_19x19_lpddr3_arm2/Kconfig" source "board/freescale/mx7d_19x19_ddr3_arm2/Kconfig" source "board/freescale/mx7dsabresd/Kconfig" +source "board/technexion/pico-imx7d/Kconfig" source "board/freescale/mx6ul_14x14_evk/Kconfig" source "board/freescale/mx6ul_nxpu_iopb/Kconfig" source "board/freescale/mx6ul_14x14_ddr3_arm2/Kconfig" diff --git a/board/technexion/pico-imx7d/Kconfig b/board/technexion/pico-imx7d/Kconfig new file mode 100644 index 0000000..f4ae18c --- /dev/null +++ b/board/technexion/pico-imx7d/Kconfig @@ -0,0 +1,15 @@ +if TARGET_PICO_IMX7D + +config SYS_BOARD + default "pico-imx7d" + +config SYS_VENDOR + default "technexion" + +config SYS_SOC + default "mx7" + +config SYS_CONFIG_NAME + default "pico-imx7d" + +endif diff --git a/board/technexion/pico-imx7d/MAINTAINERS b/board/technexion/pico-imx7d/MAINTAINERS new file mode 100644 index 0000000..99c9982 --- /dev/null +++ b/board/technexion/pico-imx7d/MAINTAINERS @@ -0,0 +1,6 @@ +Technexion PICO-IMX7D board +M: Wig Cheng +S: Maintained +F: board/pico-imx7d/ +F: include/configs/pico-imx7d.h +F: configs/pico-imx7d_defconfig diff --git a/board/technexion/pico-imx7d/Makefile b/board/technexion/pico-imx7d/Makefile new file mode 100644 index 0000000..30bba14 --- /dev/null +++ b/board/technexion/pico-imx7d/Makefile @@ -0,0 +1,10 @@ +# (C) Copyright 2015 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := pico-imx7d.o + +extra-$(CONFIG_USE_PLUGIN) := plugin.bin +$(obj)/plugin.bin: $(obj)/plugin.o + $(OBJCOPY) -O binary --gap-fill 0xff $< $@ diff --git a/board/technexion/pico-imx7d/imximage.cfg b/board/technexion/pico-imx7d/imximage.cfg new file mode 100644 index 0000000..87088d2 --- /dev/null +++ b/board/technexion/pico-imx7d/imximage.cfg @@ -0,0 +1,116 @@ +/* + * Copyright (C) 2015-2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#define __ASSEMBLY__ +#include + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi/sd/nand/onenand, qspi/nor + */ + +#ifdef CONFIG_SYS_BOOT_QSPI +BOOT_FROM qspi +#elif defined(CONFIG_SYS_BOOT_EIMNOR) +BOOT_FROM nor +#else +BOOT_FROM sd +#endif + +#ifdef CONFIG_USE_PLUGIN +/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/ +PLUGIN board/technexion/pico-imx7d/plugin.bin 0x00910000 +#else + +#ifdef CONFIG_SECURE_BOOT +CSF CONFIG_CSF_SIZE +#endif + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +DATA 4 0x30340004 0x4F400005 +/* Clear then set bit30 to ensure exit from DDR retention */ +DATA 4 0x30360388 0x40000000 +DATA 4 0x30360384 0x40000000 + +DATA 4 0x30391000 0x00000002 +DATA 4 0x307a0000 0x01040001 +DATA 4 0x307a01a0 0x80400003 +DATA 4 0x307a01a4 0x00100020 +DATA 4 0x307a01a8 0x80100004 +DATA 4 0x307a0064 0x00400046 +DATA 4 0x307a0490 0x00000001 +DATA 4 0x307a00d0 0x00020083 +DATA 4 0x307a00d4 0x00690000 +DATA 4 0x307a00dc 0x09300004 +DATA 4 0x307a00e0 0x04080000 +DATA 4 0x307a00e4 0x00100004 +DATA 4 0x307a00f4 0x0000033f +DATA 4 0x307a0100 0x09081109 +DATA 4 0x307a0104 0x0007020d +DATA 4 0x307a0108 0x03040407 +DATA 4 0x307a010c 0x00002006 +DATA 4 0x307a0110 0x04020205 +DATA 4 0x307a0114 0x03030202 +DATA 4 0x307a0120 0x00000803 +DATA 4 0x307a0180 0x00800020 +DATA 4 0x307a0184 0x02000100 +DATA 4 0x307a0190 0x02098204 +DATA 4 0x307a0194 0x00030303 +DATA 4 0x307a0200 0x00000016 +DATA 4 0x307a0204 0x00080808 +DATA 4 0x307a0210 0x00000f0f +DATA 4 0x307a0214 0x07070707 +DATA 4 0x307a0218 0x0f070707 +DATA 4 0x307a0240 0x06000604 +DATA 4 0x307a0244 0x00000001 +DATA 4 0x30391000 0x00000000 +DATA 4 0x30790000 0x17420f40 +DATA 4 0x30790004 0x10210100 +DATA 4 0x30790010 0x00060807 +DATA 4 0x307900b0 0x1010007e +DATA 4 0x3079009c 0x00000b24 +DATA 4 0x30790020 0x08080808 +DATA 4 0x30790030 0x08080808 +DATA 4 0x30790050 0x01000010 +DATA 4 0x30790050 0x00000010 + +DATA 4 0x307900c0 0x0e407304 +DATA 4 0x307900c0 0x0e447304 +DATA 4 0x307900c0 0x0e447306 + +CHECK_BITS_SET 4 0x307900c4 0x1 + +DATA 4 0x307900c0 0x0e407304 + + +DATA 4 0x30384130 0x00000000 +DATA 4 0x30340020 0x00000178 +DATA 4 0x30384130 0x00000002 +DATA 4 0x30790018 0x0000000f + +CHECK_BITS_SET 4 0x307a0004 0x1 + +#endif diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c new file mode 100755 index 0000000..245b2b8 --- /dev/null +++ b/board/technexion/pico-imx7d/pico-imx7d.c @@ -0,0 +1,676 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SYS_I2C_MXC +#include +#include +#endif +#if defined(CONFIG_MXC_EPDC) +#include +#include +#endif +#include + +#ifdef CONFIG_VIDEO_MXS +#include +#include +#endif + + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ + PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ + PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) + +#define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) +#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM) + +#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) + +#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ + PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM) + +#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \ + PAD_CTL_DSE_3P3V_49OHM) + +#define QSPI_PAD_CTRL \ + (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) + +#define SPI_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS) + +#define BUTTON_PAD_CTRL (PAD_CTL_PUS_PU5KOHM | PAD_CTL_DSE_3P3V_98OHM) + +#define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS) + +#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM) + +#define EPDC_PAD_CTRL 0x0 + +#ifdef CONFIG_SYS_I2C_MXC +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) +/* I2C1*/ +struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = MX7D_PAD_UART1_RX_DATA__I2C1_SCL | PC, + .gpio_mode = MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 | PC, + .gp = IMX_GPIO_NR(4, 0), + }, + .sda = { + .i2c_mode = MX7D_PAD_UART1_TX_DATA__I2C1_SDA | PC, + .gpio_mode = MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 | PC, + .gp = IMX_GPIO_NR(4, 1), + }, +}; + +/* I2C2 */ +struct i2c_pads_info i2c_pad_info2 = { + .scl = { + .i2c_mode = MX7D_PAD_UART2_RX_DATA__I2C2_SCL | PC, + .gpio_mode = MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 | PC, + .gp = IMX_GPIO_NR(4, 2), + }, + .sda = { + .i2c_mode = MX7D_PAD_UART2_TX_DATA__I2C2_SDA | PC, + .gpio_mode = MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 | PC, + .gp = IMX_GPIO_NR(4, 3), + }, +}; + +/* I2C4 for PMIC*/ +struct i2c_pads_info i2c_pad_info4 = { + .scl = { + .i2c_mode = MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL | PC, + .gpio_mode = MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 | PC, + .gp = IMX_GPIO_NR(6, 16), + }, + .sda = { + .i2c_mode = MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA | PC, + .gpio_mode = MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 | PC, + .gp = IMX_GPIO_NR(6, 17), + }, +}; +#endif + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_SIZE; + + return 0; +} + +static iomux_v3_cfg_t const wdog_pads[] = { + MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const uart5_pads[] = { + MX7D_PAD_I2C4_SCL__UART5_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX7D_PAD_I2C4_SDA__UART5_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc1_pads[] = { + MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_CD_B__GPIO5_IO0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_RESET_B__SD1_RESET_B | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +/* SD */ +#ifdef PICO_SD +#define USDHC3_CD_GPIO IMX_GPIO_NR(6, 9) +static iomux_v3_cfg_t const usdhc3_emmc_pads[] = { + MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA7__GPIO6_IO9 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; +#else +/* EMMC */ +#define USDHC3_CD_GPIO IMX_GPIO_NR(1, 14) +static iomux_v3_cfg_t const usdhc3_emmc_pads[] = { + MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; +#endif + +#ifdef CONFIG_VIDEO_MXS +static iomux_v3_cfg_t const lcd_pads[] = { + MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA00__LCD_DATA0 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA01__LCD_DATA1 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA02__LCD_DATA2 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA03__LCD_DATA3 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA04__LCD_DATA4 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA05__LCD_DATA5 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA06__LCD_DATA6 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA07__LCD_DATA7 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA08__LCD_DATA8 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA09__LCD_DATA9 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA18__LCD_DATA18 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA19__LCD_DATA19 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA20__LCD_DATA20 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA21__LCD_DATA21 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA22__LCD_DATA22 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_DATA23__LCD_DATA23 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_LCD_RESET__GPIO3_IO4 | MUX_PAD_CTRL(LCD_PAD_CTRL), + MX7D_PAD_GPIO1_IO06__GPIO1_IO6 | MUX_PAD_CTRL(LCD_PAD_CTRL), /* LCD_VDD_EN */ +}; + +static iomux_v3_cfg_t const pwm_pads[] = { + /* Use GPIO for Brightness adjustment, duty cycle = period */ + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* LCD_BLT_CTRL */ +}; + +struct lcd_panel_info_t { + unsigned int lcdif_base_addr; + int depth; + void (*enable)(struct lcd_panel_info_t const *dev); + struct fb_videomode mode; +}; + +void do_enable_parallel_lcd(struct lcd_panel_info_t const *dev) +{ + imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); + + imx_iomux_v3_setup_multiple_pads(pwm_pads, ARRAY_SIZE(pwm_pads)); + + /* Reset LCD */ + gpio_direction_output(IMX_GPIO_NR(3, 4) , 0); + udelay(500); + gpio_direction_output(IMX_GPIO_NR(3, 4) , 1); + + /* Set Brightness to high */ + gpio_direction_output(IMX_GPIO_NR(1, 11) , 1); + /* Set LCD enable to high */ + gpio_direction_output(IMX_GPIO_NR(1, 6) , 1); +} + +static struct lcd_panel_info_t const displays[] = {{ + .lcdif_base_addr = ELCDIF1_IPS_BASE_ADDR, + .depth = 24, + .enable = do_enable_parallel_lcd, + .mode = { + .name = "EJ050NA", + .xres = 800, + .yres = 480, + .pixclock = 29850, + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +} } }; + +int board_video_skip(void) +{ + int i; + int ret; + char const *panel = getenv("panel"); + if (!panel) { + panel = displays[0].mode.name; + printf("No panel detected: default to %s\n", panel); + i = 0; + } else { + for (i = 0; i < ARRAY_SIZE(displays); i++) { + if (!strcmp(panel, displays[i].mode.name)) + break; + } + } + if (i < ARRAY_SIZE(displays)) { + ret = mxs_lcd_panel_setup(displays[i].mode, displays[i].depth, + displays[i].lcdif_base_addr); + if (!ret) { + if (displays[i].enable) + displays[i].enable(displays+i); + printf("Display: %s (%ux%u)\n", + displays[i].mode.name, + displays[i].mode.xres, + displays[i].mode.yres); + } else + printf("LCD %s cannot be configured: %d\n", + displays[i].mode.name, ret); + } else { + printf("unsupported panel %s\n", panel); + return -EINVAL; + } + + return 0; +} +#endif + +#ifdef CONFIG_FEC_MXC +static iomux_v3_cfg_t const fec1_pads[] = { + MX7D_PAD_SD2_CD_B__ENET2_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), + MX7D_PAD_SD2_WP__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_SD3_STROBE__GPIO6_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL), // Interrupt + MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), // Reset pin +}; + +#define FEC1_RST_GPIO IMX_GPIO_NR(6, 11) + + +static void setup_iomux_fec(void) +{ + imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); +} +#endif + +static iomux_v3_cfg_t const bcm4339_pads[] = { + MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL), //wifi reset + MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL), //bt reset +}; + +static iomux_v3_cfg_t const ccm_clko_pads[] = { + MX7D_PAD_GPIO1_IO03__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX7D_PAD_GPIO1_IO02__CCM_CLKO1 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads)); +} + +#ifdef CONFIG_FSL_ESDHC + +#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0) + +static struct fsl_esdhc_cfg usdhc_cfg[3] = { + {USDHC1_BASE_ADDR, 0, 4}, + {USDHC3_BASE_ADDR}, +}; + +int mmc_get_env_devno(void) +{ + struct bootrom_sw_info **p = + (struct bootrom_sw_info **)ROM_SW_INFO_ADDR; + + u8 boot_type = (*p)->boot_dev_type; + u8 dev_no = (*p)->boot_dev_instance; + + /* If not boot from sd/mmc, use default value */ + if ((boot_type != BOOT_TYPE_SD) && (boot_type != BOOT_TYPE_MMC)) + return CONFIG_SYS_MMC_ENV_DEV; + + if (2 == dev_no) + dev_no--; + + return dev_no; +} + +int mmc_map_to_kernel_blk(int dev_no) +{ + if (1 == dev_no) + dev_no++; + + return dev_no; +} + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = !gpio_get_value(USDHC1_CD_GPIO); /* Assume uSDHC1 sd is always present */ + break; + case USDHC3_BASE_ADDR: + ret = !gpio_get_value(USDHC3_CD_GPIO); /* Assume uSDHC3 emmc is always present */ + break; + } + + return ret; +} + +int board_mmc_init(bd_t *bis) +{ + int i, ret; + /* + * According to the board_mmc_init() the following map is done: + * (U-boot device node) (Physical Port) + * mmc0 USDHC1 + * mmc2 USDHC3 (eMMC) + */ + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc3_emmc_pads, ARRAY_SIZE(usdhc3_emmc_pads)); + gpio_request(USDHC3_CD_GPIO, "usdhc3_cd"); + gpio_direction_input(USDHC3_CD_GPIO); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) than supported by the board\n", i + 1); + return 0; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) + return ret; + } + + return 0; +} + +int check_mmc_autodetect(void) +{ + char *autodetect_str = getenv("mmcautodetect"); + + if ((autodetect_str != NULL) && + (strcmp(autodetect_str, "yes") == 0)) { + return 1; + } + + return 0; +} + +void board_late_mmc_init(void) +{ + char cmd[32]; + char mmcblk[32]; + u32 dev_no = mmc_get_env_devno(); + + if (!check_mmc_autodetect()) + return; + + setenv_ulong("mmcdev", dev_no); + + /* Set mmcblk env */ + sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", + mmc_map_to_kernel_blk(dev_no)); + setenv("mmcroot", mmcblk); + + sprintf(cmd, "mmc dev %d", dev_no); + run_command(cmd, 0); +} + +#endif + +#ifdef CONFIG_FEC_MXC +int board_eth_init(bd_t *bis) +{ + int ret; + + setup_iomux_fec(); + + ret = fecmxc_initialize_multi(bis, 0, + CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); + if (ret) + printf("FEC1 MXC: %s:failed\n", __func__); + + gpio_direction_output(FEC1_RST_GPIO, 0); + udelay(500); + gpio_set_value(FEC1_RST_GPIO, 1); + + return ret; +} + +static int setup_fec(void) +{ + struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs + = (struct iomuxc_gpr_base_regs *) IOMUXC_GPR_BASE_ADDR; + int ret; + + /* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/ + clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], + (IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK | + IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0); + + ret = set_clk_enet(ENET_125MHz); + if (ret) + return ret; + + return 0; +} + + +int board_phy_config(struct phy_device *phydev) +{ + /* enable rgmii rxc skew and phy mode select to RGMII copper */ + /*phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x21); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x7ea8); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x2f); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x71b7);*/ + + unsigned short val; + + /* To enable AR8035 ouput a 125MHz clk from CLK_25M */ +/* phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7); + phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016); + phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007); + + val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe); + val &= 0xffe7; + val |= 0x18; + phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val); +*/ + /* introduce tx clock delay */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); + val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); + val |= 0x0100; + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); + + if (phydev->drv->config) + phydev->drv->config(phydev); + return 0; +} +#endif + +int board_early_init_f(void) +{ + setup_iomux_uart(); + +#ifdef CONFIG_SYS_I2C_MXC + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4); +#endif + + return 0; +} + +#define BT_RST_GPIO IMX_GPIO_NR(6, 16) +#define WIFI_RST_GPIO IMX_GPIO_NR(6, 17) + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + +#ifdef CONFIG_FEC_MXC + setup_fec(); +#endif + + //pico-imx7 custom initialize + imx_iomux_v3_setup_multiple_pads(bcm4339_pads, ARRAY_SIZE(bcm4339_pads)); + imx_iomux_v3_setup_multiple_pads(ccm_clko_pads, ARRAY_SIZE(ccm_clko_pads)); + + gpio_direction_output(BT_RST_GPIO, 1); + udelay(500); + gpio_direction_output(WIFI_RST_GPIO, 1); + udelay(500); + clock_set_src(IPP_DO_CLKO2,OSC_32K_CLK); + udelay(500); + clock_set_src(IPP_DO_CLKO1,OSC_24M_CLK); + + return 0; +} + +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"sd1", MAKE_CFGVAL(0x10, 0x10, 0x00, 0x00)}, + {"emmc", MAKE_CFGVAL(0x10, 0x2a, 0x00, 0x00)}, + /* TODO: Nand */ + /*{"qspi", MAKE_CFGVAL(0x00, 0x40, 0x00, 0x00)},*/ + {NULL, 0}, +}; +#endif + +#ifdef CONFIG_POWER +#define I2C_PMIC 3 +int power_init_board(void) +{ + struct pmic *p; + int ret; + unsigned int reg, rev_id; + + ret = power_pfuze300_init(I2C_PMIC); + if (ret) + return ret; + + p = pmic_get("PFUZE300"); + ret = pmic_probe(p); + if (ret) + return ret; + + pmic_reg_read(p, PFUZE300_DEVICEID, ®); + pmic_reg_read(p, PFUZE300_REVID, &rev_id); + printf("PMIC: PFUZE300 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id); + + /* disable Low Power Mode during standby mode */ + pmic_reg_read(p, PFUZE300_LDOGCTL, ®); + reg |= 0x1; + pmic_reg_write(p, PFUZE300_LDOGCTL, reg); + + /* SW1A/1B mode set to APS/APS */ + reg = 0x8; + pmic_reg_write(p, PFUZE300_SW1AMODE, reg); + pmic_reg_write(p, PFUZE300_SW1BMODE, reg); + + /* SW1A/1B standby voltage set to 1.025V */ + reg = 0xd; + pmic_reg_write(p, PFUZE300_SW1ASTBY, reg); + pmic_reg_write(p, PFUZE300_SW1BSTBY, reg); + + /* decrease SW1B normal voltage to 0.975V */ + pmic_reg_read(p, PFUZE300_SW1BVOLT, ®); + reg &= ~0x1f; + reg |= PFUZE300_SW1AB_SETP(975); + pmic_reg_write(p, PFUZE300_SW1BVOLT, reg); + + return 0; +} +#endif + +int board_late_init(void) +{ +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + +#ifdef CONFIG_ENV_IS_IN_MMC + board_late_mmc_init(); +#endif + + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); + + set_wdog_reset((struct wdog_regs *)WDOG1_BASE_ADDR); + + return 0; +} + +u32 get_board_rev(void) +{ + return get_cpu_rev(); +} + +int checkboard(void) +{ + puts("Board: i.MX7D PICOSOM\n"); + + return 0; +} + +#ifdef CONFIG_USB_EHCI_MX7 +iomux_v3_cfg_t const usb_otg1_pads[] = { + MX7D_PAD_UART3_TX_DATA__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +int board_ehci_hcd_init(int port) +{ + switch (port) { + case 0: + imx_iomux_v3_setup_multiple_pads(usb_otg1_pads, + ARRAY_SIZE(usb_otg1_pads)); + break; + + default: + printf("MXC USB port %d not yet supported\n", port); + return 1; + } + return 0; +} +#endif + diff --git a/board/technexion/pico-imx7d/plugin.S b/board/technexion/pico-imx7d/plugin.S new file mode 100755 index 0000000..75033f7 --- /dev/null +++ b/board/technexion/pico-imx7d/plugin.S @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2014-2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +/* DDR script */ +.macro imx7d_ddrphy_latency_setting + ldr r2, =ANATOP_BASE_ADDR + ldr r3, [r2, #0x800] + and r3, r3, #0xFF + cmp r3, #0x11 + bne NO_DELAY + + /*TO 1.1*/ + ldr r1, =0x00000dee + str r1, [r0, #0x9c] + ldr r1, =0x18181818 + str r1, [r0, #0x7c] + ldr r1, =0x18181818 + str r1, [r0, #0x80] + ldr r1, =0x40401818 + str r1, [r0, #0x84] + ldr r1, =0x00000040 + str r1, [r0, #0x88] + ldr r1, =0x40404040 + str r1, [r0, #0x6c] + b TUNE_END + +NO_DELAY: + /*TO 1.0*/ + ldr r1, =0x00000b24 + str r1, [r0, #0x9c] + +TUNE_END: +.endm + +.macro imx7d_ddr_freq_setting + ldr r2, =ANATOP_BASE_ADDR + ldr r3, [r2, #0x800] + and r3, r3, #0xFF + cmp r3, #0x11 + bne FREQ_DEFAULT_533 + + /* Change to 400Mhz for TO1.1 */ + ldr r0, =ANATOP_BASE_ADDR + ldr r1, =0x70 + ldr r2, =0x00703021 + str r2, [r0, r1] + ldr r1, =0x90 + ldr r2, =0x0 + str r2, [r0, r1] + ldr r1, =0x70 + ldr r2, =0x00603021 + str r2, [r0, r1] + + ldr r3, =0x80000000 +wait_lock: + ldr r2, [r0, r1] + and r2, r3 + cmp r2, r3 + bne wait_lock + + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x9880 + ldr r2, =0x1 + str r2, [r0, r1] + +FREQ_DEFAULT_533: +.endm + +.macro imx7d_sabresd_ddr_setting + imx7d_ddr_freq_setting + + /* Configure ocram_epdc */ + ldr r0, =IOMUXC_GPR_BASE_ADDR + ldr r1, =0x4f400005 + str r1, [r0, #0x4] + + /* clear/set bit30 of SNVS_MISC_CTRL to ensure exit from ddr retention */ + ldr r0, =ANATOP_BASE_ADDR + ldr r1, =(0x1 << 30) + str r1, [r0, #0x388] + str r1, [r0, #0x384] + + ldr r0, =SRC_BASE_ADDR + ldr r1, =0x2 + ldr r2, =0x1000 + str r1, [r0, r2] + + ldr r0, =DDRC_IPS_BASE_ADDR + ldr r1, =0x01040001 + str r1, [r0] + ldr r1, =0x80400003 + str r1, [r0, #0x1a0] + ldr r1, =0x00100020 + str r1, [r0, #0x1a4] + ldr r1, =0x80100004 + str r1, [r0, #0x1a8] + ldr r1, =0x00400046 + str r1, [r0, #0x64] + ldr r1, =0x1 + str r1, [r0, #0x490] + ldr r1, =0x00020001 + str r1, [r0, #0xd0] + ldr r1, =0x00690000 + str r1, [r0, #0xd4] + ldr r1, =0x09300004 + str r1, [r0, #0xdc] + ldr r1, =0x04080000 + str r1, [r0, #0xe0] + ldr r1, =0x00100004 + str r1, [r0, #0xe4] + ldr r1, =0x33f + str r1, [r0, #0xf4] + ldr r1, =0x09081109 + str r1, [r0, #0x100] + ldr r1, =0x0007020d + str r1, [r0, #0x104] + ldr r1, =0x03040407 + str r1, [r0, #0x108] + ldr r1, =0x00002006 + str r1, [r0, #0x10c] + ldr r1, =0x04020205 + str r1, [r0, #0x110] + ldr r1, =0x03030202 + str r1, [r0, #0x114] + ldr r1, =0x00000803 + str r1, [r0, #0x120] + ldr r1, =0x00800020 + str r1, [r0, #0x180] + ldr r1, =0x02000100 + str r1, [r0, #0x184] + ldr r1, =0x02098204 + str r1, [r0, #0x190] + ldr r1, =0x00030303 + str r1, [r0, #0x194] + + ldr r1, =0x00000016 + str r1, [r0, #0x200] + ldr r1, =0x00080808 + str r1, [r0, #0x204] + ldr r1, =0x00000f0f + str r1, [r0, #0x210] + ldr r1, =0x07070707 + str r1, [r0, #0x214] + ldr r1, =0x0f070707 + str r1, [r0, #0x218] + + ldr r1, =0x06000604 + str r1, [r0, #0x240] + ldr r1, =0x00000001 + str r1, [r0, #0x244] + + ldr r0, =SRC_BASE_ADDR + mov r1, #0x0 + ldr r2, =0x1000 + str r1, [r0, r2] + + ldr r0, =DDRPHY_IPS_BASE_ADDR + ldr r1, =0x17420f40 + str r1, [r0] + ldr r1, =0x10210100 + str r1, [r0, #0x4] + ldr r1, =0x00060807 + str r1, [r0, #0x10] + ldr r1, =0x1010007e + str r1, [r0, #0xb0] + imx7d_ddrphy_latency_setting + ldr r1, =0x08080808 + str r1, [r0, #0x20] + ldr r1, =0x08080808 + str r1, [r0, #0x30] + ldr r1, =0x01000010 + str r1, [r0, #0x50] + + ldr r1, =0x0e407304 + str r1, [r0, #0xc0] + ldr r1, =0x0e447304 + str r1, [r0, #0xc0] + ldr r1, =0x0e447306 + str r1, [r0, #0xc0] + +wait_zq: + ldr r1, [r0, #0xc4] + tst r1, #0x1 + beq wait_zq + + ldr r1, =0x0e407304 + str r1, [r0, #0xc0] + + ldr r0, =CCM_BASE_ADDR + mov r1, #0x0 + ldr r2, =0x4130 + str r1, [r0, r2] + ldr r0, =IOMUXC_GPR_BASE_ADDR + mov r1, #0x178 + str r1, [r0, #0x20] + ldr r0, =CCM_BASE_ADDR + mov r1, #0x2 + ldr r2, =0x4130 + str r1, [r0, r2] + ldr r0, =DDRPHY_IPS_BASE_ADDR + ldr r1, =0x0000000f + str r1, [r0, #0x18] + + ldr r0, =DDRC_IPS_BASE_ADDR +wait_stat: + ldr r1, [r0, #0x4] + tst r1, #0x1 + beq wait_stat +.endm + +.macro imx7_clock_gating +.endm + +.macro imx7_qos_setting +.endm + +.macro imx7_ddr_setting + imx7d_sabresd_ddr_setting +.endm + +/* include the common plugin code here */ +#include diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig new file mode 100644 index 0000000..d38d510 --- /dev/null +++ b/configs/pico-imx7d_defconfig @@ -0,0 +1,7 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/technexion/pico-imx7d/imximage.cfg,MX7D" +CONFIG_ARM=y +CONFIG_TARGET_PICO_IMX7D=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h new file mode 100755 index 0000000..7f5fb77 --- /dev/null +++ b/include/configs/pico-imx7d.h @@ -0,0 +1,445 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX7D SABRESD board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PICO_IMX7D_CONFIG_H +#define __PICO_IMX7D_CONFIG_H + +#include +#include +#include "mx7_common.h" +#include + +#define CONFIG_MX7 +#define CONFIG_ROM_UNIFIED_SECTIONS +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_DBG_MONITOR +/* uncomment for PLUGIN mode support */ +/* #define CONFIG_USE_PLUGIN */ + +/* uncomment for SECURE mode support */ +/* #define CONFIG_SECURE_BOOT */ + +#ifdef CONFIG_SECURE_BOOT +#ifndef CONFIG_CSF_SIZE +#define CONFIG_CSF_SIZE 0x4000 +#endif +#endif + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART5_IPS_BASE_ADDR + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ + +#define PHYS_SDRAM_SIZE SZ_1G + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 1 + +#define CONFIG_PHYLIB +#define CONFIG_PHY_BROADCOM +#define CONFIG_FEC_DMA_MINALIGN 64 + +/* ENET1 + MDIO2 */ +#define IMX_FEC_BASE ENET_IPS_BASE_ADDR +#define CONFIG_FEC_MXC_MDIO_BASE ENET2_IPS_BASE_ADDR + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE300 +#define CONFIG_POWER_PFUZE300_I2C_ADDR 0x08 + +#undef CONFIG_BOOTM_NETBSD +#undef CONFIG_BOOTM_PLAN9 +#undef CONFIG_BOOTM_RTEMS + +#undef CONFIG_CMD_EXPORTENV +#undef CONFIG_CMD_IMPORTENV + +/* I2C configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* Command definition */ +#include + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x80800000 +#define CONFIG_SYS_TEXT_BASE 0x87800000 + +#define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000 /* Set to QSPI1 A flash at default */ +#define CONFIG_CMD_BOOTAUX /* Boot M4 */ +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_CMD_BOOTAUX +#define CONFIG_MXC_RDC /* Enable RDC to isolate the peripherals for A7 and M4 */ + +#define UPDATE_M4_ENV \ + "m4image=m4_qspi.bin\0" \ + "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \ + "update_m4_from_sd=" \ + "if sf probe 0:0; then " \ + "if run loadm4image; then " \ + "setexpr fw_sz ${filesize} + 0xffff; " \ + "setexpr fw_sz ${fw_sz} / 0x10000; " \ + "setexpr fw_sz ${fw_sz} * 0x10000; " \ + "sf erase 0x0 ${fw_sz}; " \ + "sf write ${loadaddr} 0x0 ${filesize}; " \ + "fi; " \ + "fi\0" \ + "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0" +#else +#define UPDATE_M4_ENV "" +#endif + +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 +#ifdef CONFIG_SYS_BOOT_NAND +#define CONFIG_MFG_NAND_PARTITION "mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),-(rootfs) " +#else +#define CONFIG_MFG_NAND_PARTITION "" +#endif + +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_MODE \ + "panel=EJ050NA\0" +#else +#define CONFIG_VIDEO_MODE "" +#endif + +#define CONFIG_MFG_ENV_SETTINGS \ + "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ + "rdinit=/linuxrc " \ + "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ + "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ + "g_mass_storage.iSerialNumber=\"\" "\ + CONFIG_MFG_NAND_PARTITION \ + "clk_ignore_unused "\ + "\0" \ + "initrd_addr=0x83800000\0" \ + "initrd_high=0xffffffff\0" \ + "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ + +#if defined(CONFIG_SYS_BOOT_NAND) +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_MFG_ENV_SETTINGS \ + CONFIG_VIDEO_MODE \ + "fdt_addr=0x83000000\0" \ + "fdt_high=0xffffffff\0" \ + "console=ttymxc4\0" \ + "bootargs=console=ttymxc4,115200 ubi.mtd=3 " \ + "root=ubi0:rootfs rootfstype=ubifs " \ + "mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),-(rootfs)\0"\ + "bootcmd=nand read ${loadaddr} 0x4000000 0x800000;"\ + "nand read ${fdt_addr} 0x5000000 0x100000;"\ + "bootz ${loadaddr} - ${fdt_addr}\0" + +#else +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_MFG_ENV_SETTINGS \ + UPDATE_M4_ENV \ + CONFIG_VIDEO_MODE \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "console=ttymxc4\0" \ + "splashpos=m,m\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=imx7d-pico_dwarf.dtb\0" \ + "fdt_addr=0x83000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot} 2\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" +#endif + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 1024 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE SZ_8K + +#ifdef CONFIG_SYS_BOOT_QSPI +#define CONFIG_SYS_USE_QSPI +#define CONFIG_ENV_IS_IN_SPI_FLASH +#elif defined CONFIG_SYS_BOOT_NAND +#define CONFIG_SYS_USE_NAND +#define CONFIG_ENV_IS_IN_NAND +#else +#define CONFIG_ENV_IS_IN_MMC +#endif + +#ifdef CONFIG_SYS_USE_NAND +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS + +/* NAND stuff */ +#define CONFIG_NAND_MXS +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* DMA stuff, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 +#endif + +#ifdef CONFIG_SYS_USE_QSPI +#define CONFIG_FSL_QSPI /* enable the QUADSPI driver */ +#define CONFIG_QSPI_BASE QSPI1_IPS_BASE_ADDR +#define CONFIG_QSPI_MEMMAP_BASE QSPI0_ARB_BASE_ADDR + +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_MACRONIX +#define CONFIG_SPI_FLASH_BAR +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 40000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#endif + +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_ENV_OFFSET (8 * SZ_64K) +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) +#define CONFIG_ENV_OFFSET (768 * 1024) +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#elif defined(CONFIG_ENV_IS_IN_NAND) +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_OFFSET (3 << 18) +#define CONFIG_ENV_SECT_SIZE (128 << 10) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#endif + +#ifdef CONFIG_SYS_USE_NAND +#define CONFIG_SYS_FSL_USDHC_NUM 1 +#else +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#endif +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ +#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ +#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#define CONFIG_CMD_BMODE + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#define CONFIG_VIDEO +#ifdef CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_MXS +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_LOGO +#endif + +/* #define CONFIG_SPLASH_SCREEN*/ +/* #define CONFIG_MXC_EPDC*/ + +/* + * SPLASH SCREEN Configs + */ +#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_MXC_EPDC) +/* + * Framebuffer and LCD + */ +#define CONFIG_CFB_CONSOLE +#define CONFIG_CMD_BMP +#define CONFIG_LCD +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#undef LCD_TEST_PATTERN +/* #define CONFIG_SPLASH_IS_IN_MMC 1 */ +#define LCD_BPP LCD_MONOCHROME +/* #define CONFIG_SPLASH_SCREEN_ALIGN 1 */ + +#define CONFIG_WAVEFORM_BUF_SIZE 0x400000 +#endif + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX7 +#define CONFIG_USB_STORAGE +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +#define CONFIG_IMX_THERMAL + +#if defined(CONFIG_MXC_EPDC) && defined(CONFIG_SYS_USE_QSPI) +#error "EPDC Pins conflicts QSPI, Either EPDC or QSPI can be enabled!" +#endif + +#if defined(CONFIG_ANDROID_SUPPORT) +#include "mx7dsabresdandroid.h" +#endif +#endif /* __CONFIG_H */ -- cgit v1.1