From b2ac7bfeb29bd3e84af7fd95c1d0cb43e381bc8d Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 28 Apr 2015 13:54:23 +0800 Subject: MLK-10774-17 imx:mx6sabresd update bsp Update bsp and add configuration file Signed-off-by: Peng Fan --- board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg | 239 +++-- board/freescale/mx6sabresd/mx6sabresd.c | 1002 ++++++++++++-------- board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg | 124 +++ configs/mx6qsabresd_sata_defconfig | 7 + configs/mx6solosabresd_defconfig | 7 + include/configs/mx6sabre_common.h | 200 +++- include/configs/mx6sabresd.h | 36 +- 7 files changed, 1033 insertions(+), 582 deletions(-) create mode 100644 board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg create mode 100644 configs/mx6qsabresd_sata_defconfig create mode 100644 configs/mx6solosabresd_defconfig diff --git a/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg b/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg index bb6c60b..aa897e9 100644 --- a/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg +++ b/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Copyright (C) 2011-2014 Freescale Semiconductor, Inc. * Jason Liu * * SPDX-License-Identifier: GPL-2.0+ @@ -10,15 +10,31 @@ * The syntax is taken as close as possible with the kwbimage */ +#define __ASSEMBLY__ +#include /* image version */ IMAGE_VERSION 2 /* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) + * Boot Device : one of spi, sd, sata + * the board has no nand and eimnor + * spinor: flash_offset: 0x0400 + * sata: flash_offset: 0x0400 + * sd/mmc: flash_offset: 0x0400 */ + +/* the same flash_offset as sd */ BOOT_FROM sd +#ifdef CONFIG_USE_PLUGIN +/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/ +PLUGIN board/freescale/mx6sabresd/plugin.bin 0x00907000 +#else + +#ifdef CONFIG_SECURE_BOOT +CSF 0x2000 +#endif + /* * Device Configuration Data (DCD) * @@ -30,132 +46,104 @@ BOOT_FROM sd * Address absolute address of the register * value value to be stored in the register */ -DATA 4 0x020e05a8 0x00000030 -DATA 4 0x020e05b0 0x00000030 -DATA 4 0x020e0524 0x00000030 -DATA 4 0x020e051c 0x00000030 - -DATA 4 0x020e0518 0x00000030 -DATA 4 0x020e050c 0x00000030 -DATA 4 0x020e05b8 0x00000030 -DATA 4 0x020e05c0 0x00000030 - -DATA 4 0x020e05ac 0x00020030 -DATA 4 0x020e05b4 0x00020030 -DATA 4 0x020e0528 0x00020030 -DATA 4 0x020e0520 0x00020030 - -DATA 4 0x020e0514 0x00020030 -DATA 4 0x020e0510 0x00020030 -DATA 4 0x020e05bc 0x00020030 -DATA 4 0x020e05c4 0x00020030 - -DATA 4 0x020e056c 0x00020030 -DATA 4 0x020e0578 0x00020030 -DATA 4 0x020e0588 0x00020030 -DATA 4 0x020e0594 0x00020030 - -DATA 4 0x020e057c 0x00020030 -DATA 4 0x020e0590 0x00003000 -DATA 4 0x020e0598 0x00003000 -DATA 4 0x020e058c 0x00000000 - -DATA 4 0x020e059c 0x00003030 -DATA 4 0x020e05a0 0x00003030 -DATA 4 0x020e0784 0x00000030 -DATA 4 0x020e0788 0x00000030 - -DATA 4 0x020e0794 0x00000030 -DATA 4 0x020e079c 0x00000030 -DATA 4 0x020e07a0 0x00000030 -DATA 4 0x020e07a4 0x00000030 - -DATA 4 0x020e07a8 0x00000030 -DATA 4 0x020e0748 0x00000030 -DATA 4 0x020e074c 0x00000030 -DATA 4 0x020e0750 0x00020000 - -DATA 4 0x020e0758 0x00000000 -DATA 4 0x020e0774 0x00020000 -DATA 4 0x020e078c 0x00000030 -DATA 4 0x020e0798 0x000C0000 - -DATA 4 0x021b081c 0x33333333 -DATA 4 0x021b0820 0x33333333 -DATA 4 0x021b0824 0x33333333 -DATA 4 0x021b0828 0x33333333 - -DATA 4 0x021b481c 0x33333333 -DATA 4 0x021b4820 0x33333333 -DATA 4 0x021b4824 0x33333333 -DATA 4 0x021b4828 0x33333333 - -DATA 4 0x021b0018 0x00081740 - -DATA 4 0x021b001c 0x00008000 -DATA 4 0x021b000c 0x555A7974 -DATA 4 0x021b0010 0xDB538F64 -DATA 4 0x021b0014 0x01FF00DB -DATA 4 0x021b002c 0x000026D2 - -DATA 4 0x021b0030 0x005A1023 -DATA 4 0x021b0008 0x09444040 -DATA 4 0x021b0004 0x00025576 -DATA 4 0x021b0040 0x00000027 -DATA 4 0x021b0000 0x831A0000 - -DATA 4 0x021b001c 0x04088032 -DATA 4 0x021b001c 0x0408803A -DATA 4 0x021b001c 0x00008033 -DATA 4 0x021b001c 0x0000803B -DATA 4 0x021b001c 0x00428031 -DATA 4 0x021b001c 0x00428039 -DATA 4 0x021b001c 0x19308030 -DATA 4 0x021b001c 0x19308038 - -DATA 4 0x021b001c 0x04008040 -DATA 4 0x021b001c 0x04008048 -DATA 4 0x021b0800 0xA1380003 -DATA 4 0x021b4800 0xA1380003 -DATA 4 0x021b0020 0x00005800 -DATA 4 0x021b0818 0x00022227 -DATA 4 0x021b4818 0x00022227 - -DATA 4 0x021b083c 0x434B0350 -DATA 4 0x021b0840 0x034C0359 -DATA 4 0x021b483c 0x434B0350 -DATA 4 0x021b4840 0x03650348 -DATA 4 0x021b0848 0x4436383B -DATA 4 0x021b4848 0x39393341 -DATA 4 0x021b0850 0x35373933 -DATA 4 0x021b4850 0x48254A36 - -DATA 4 0x021b080c 0x001F001F -DATA 4 0x021b0810 0x001F001F - -DATA 4 0x021b480c 0x00440044 -DATA 4 0x021b4810 0x00440044 - -DATA 4 0x021b08b8 0x00000800 -DATA 4 0x021b48b8 0x00000800 - -DATA 4 0x021b001c 0x00000000 -DATA 4 0x021b0404 0x00011006 +DATA 4, 0x020e0798, 0x000C0000 +DATA 4, 0x020e0758, 0x00000000 +DATA 4, 0x020e0588, 0x00000030 +DATA 4, 0x020e0594, 0x00000030 +DATA 4, 0x020e056c, 0x00000030 +DATA 4, 0x020e0578, 0x00000030 +DATA 4, 0x020e074c, 0x00000030 +DATA 4, 0x020e057c, 0x00000030 +DATA 4, 0x020e058c, 0x00000000 +DATA 4, 0x020e059c, 0x00000030 +DATA 4, 0x020e05a0, 0x00000030 +DATA 4, 0x020e078c, 0x00000030 +DATA 4, 0x020e0750, 0x00020000 +DATA 4, 0x020e05a8, 0x00000030 +DATA 4, 0x020e05b0, 0x00000030 +DATA 4, 0x020e0524, 0x00000030 +DATA 4, 0x020e051c, 0x00000030 +DATA 4, 0x020e0518, 0x00000030 +DATA 4, 0x020e050c, 0x00000030 +DATA 4, 0x020e05b8, 0x00000030 +DATA 4, 0x020e05c0, 0x00000030 +DATA 4, 0x020e0774, 0x00020000 +DATA 4, 0x020e0784, 0x00000030 +DATA 4, 0x020e0788, 0x00000030 +DATA 4, 0x020e0794, 0x00000030 +DATA 4, 0x020e079c, 0x00000030 +DATA 4, 0x020e07a0, 0x00000030 +DATA 4, 0x020e07a4, 0x00000030 +DATA 4, 0x020e07a8, 0x00000030 +DATA 4, 0x020e0748, 0x00000030 +DATA 4, 0x020e05ac, 0x00000030 +DATA 4, 0x020e05b4, 0x00000030 +DATA 4, 0x020e0528, 0x00000030 +DATA 4, 0x020e0520, 0x00000030 +DATA 4, 0x020e0514, 0x00000030 +DATA 4, 0x020e0510, 0x00000030 +DATA 4, 0x020e05bc, 0x00000030 +DATA 4, 0x020e05c4, 0x00000030 +DATA 4, 0x021b0800, 0xa1390003 +DATA 4, 0x021b080c, 0x001F001F +DATA 4, 0x021b0810, 0x001F001F +DATA 4, 0x021b480c, 0x001F001F +DATA 4, 0x021b4810, 0x001F001F +DATA 4, 0x021b083c, 0x43270338 +DATA 4, 0x021b0840, 0x03200314 +DATA 4, 0x021b483c, 0x431A032F +DATA 4, 0x021b4840, 0x03200263 +DATA 4, 0x021b0848, 0x4B434748 +DATA 4, 0x021b4848, 0x4445404C +DATA 4, 0x021b0850, 0x38444542 +DATA 4, 0x021b4850, 0x4935493A +DATA 4, 0x021b081c, 0x33333333 +DATA 4, 0x021b0820, 0x33333333 +DATA 4, 0x021b0824, 0x33333333 +DATA 4, 0x021b0828, 0x33333333 +DATA 4, 0x021b481c, 0x33333333 +DATA 4, 0x021b4820, 0x33333333 +DATA 4, 0x021b4824, 0x33333333 +DATA 4, 0x021b4828, 0x33333333 +DATA 4, 0x021b08b8, 0x00000800 +DATA 4, 0x021b48b8, 0x00000800 +DATA 4, 0x021b0004, 0x00020036 +DATA 4, 0x021b0008, 0x09444040 +DATA 4, 0x021b000c, 0x555A7975 +DATA 4, 0x021b0010, 0xFF538F64 +DATA 4, 0x021b0014, 0x01FF00DB +DATA 4, 0x021b0018, 0x00001740 +DATA 4, 0x021b001c, 0x00008000 +DATA 4, 0x021b002c, 0x000026d2 +DATA 4, 0x021b0030, 0x005A1023 +DATA 4, 0x021b0040, 0x00000027 +DATA 4, 0x021b0000, 0x831A0000 +DATA 4, 0x021b001c, 0x04088032 +DATA 4, 0x021b001c, 0x00008033 +DATA 4, 0x021b001c, 0x00048031 +DATA 4, 0x021b001c, 0x09408030 +DATA 4, 0x021b001c, 0x04008040 +DATA 4, 0x021b0020, 0x00005800 +DATA 4, 0x021b0818, 0x00011117 +DATA 4, 0x021b4818, 0x00011117 +DATA 4, 0x021b0004, 0x00025576 +DATA 4, 0x021b0404, 0x00011006 +DATA 4, 0x021b001c, 0x00000000 /* set the default clock gate to save power */ -DATA 4 0x020c4068 0x00C03F3F -DATA 4 0x020c406c 0x0030FC03 -DATA 4 0x020c4070 0x0FFFC000 -DATA 4 0x020c4074 0x3FF00000 -DATA 4 0x020c4078 0x00FFF300 -DATA 4 0x020c407c 0x0F0000C3 -DATA 4 0x020c4080 0x000003FF +DATA 4, 0x020c4068, 0x00C03F3F +DATA 4, 0x020c406c, 0x0030FC03 +DATA 4, 0x020c4070, 0x0FFFC000 +DATA 4, 0x020c4074, 0x3FF00000 +DATA 4, 0x020c4078, 0x00FFF300 +DATA 4, 0x020c407c, 0x0F0000F3 +DATA 4, 0x020c4080, 0x000003FF /* enable AXI cache for VDOA/VPU/IPU */ -DATA 4 0x020e0010 0xF00000CF +DATA 4, 0x020e0010, 0xF00000CF /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4 0x020e0018 0x007F007F -DATA 4 0x020e001c 0x007F007F +DATA 4, 0x020e0018, 0x007F007F +DATA 4, 0x020e001c, 0x007F007F /* * Setup CCM_CCOSR register as follows: @@ -166,4 +154,5 @@ DATA 4 0x020e001c 0x007F007F * * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz */ -DATA 4 0x020c4060 0x000000fb +DATA 4, 0x020c4060, 0x000000fb +#endif diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 562355d..0a6c29e 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012-2015 Freescale Semiconductor, Inc. * * Author: Fabio Estevam * @@ -30,12 +30,22 @@ #include #include #include +#include +#include #include #include #include "../common/pfuze.h" #include #include +#if defined(CONFIG_MX6DL) && defined(CONFIG_MXC_EPDC) +#include +#include +#endif +#ifdef CONFIG_CMD_SATA +#include +#endif + DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ @@ -56,6 +66,9 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE | PAD_CTL_SRE_FAST) +#define EPDC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + #define I2C_PMIC 1 #define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL) @@ -146,6 +159,7 @@ static iomux_v3_cfg_t const usdhc4_pads[] = { MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; +#ifdef CONFIG_MXC_SPI static iomux_v3_cfg_t const ecspi1_pads[] = { MX6_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), MX6_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), @@ -153,6 +167,17 @@ static iomux_v3_cfg_t const ecspi1_pads[] = { MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +static void setup_spi(void) +{ + imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); +} + +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1; +} +#endif + static iomux_v3_cfg_t const rgb_pads[] = { MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL), MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL), @@ -205,11 +230,6 @@ static struct i2c_pads_info i2c_pad_info1 = { } }; -static void setup_spi(void) -{ - imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); -} - iomux_v3_cfg_t const pcie_pads[] = { MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), /* POWER */ MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), /* RESET */ @@ -228,49 +248,49 @@ iomux_v3_cfg_t const di0_pads[] = { #if defined(CONFIG_MX6DL) && defined(CONFIG_MXC_EPDC) static iomux_v3_cfg_t const epdc_enable_pads[] = { - MX6_PAD_EIM_A16__EPDC_SDDO_0 | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_DA10__EPDC_SDDO_1 | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_DA12__EPDC_SDDO_2 | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_DA11__EPDC_SDDO_3 | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_LBA__EPDC_SDDO_4 | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_EB2__EPDC_SDDO_5 | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_CS0__EPDC_SDDO_6 | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_RW__EPDC_SDDO_7 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_A16__EPDC_DATA00 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_DA10__EPDC_DATA01 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_DA12__EPDC_DATA02 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_DA11__EPDC_DATA03 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_LBA__EPDC_DATA04 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_EB2__EPDC_DATA05 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_CS0__EPDC_DATA06 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_RW__EPDC_DATA07 | MUX_PAD_CTRL(EPDC_PAD_CTRL), MX6_PAD_EIM_A21__EPDC_GDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL), MX6_PAD_EIM_A22__EPDC_GDSP | MUX_PAD_CTRL(EPDC_PAD_CTRL), MX6_PAD_EIM_A23__EPDC_GDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL), MX6_PAD_EIM_A24__EPDC_GDRL | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_D31__EPDC_SDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_D31__EPDC_SDCLK_P | MUX_PAD_CTRL(EPDC_PAD_CTRL), MX6_PAD_EIM_D27__EPDC_SDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL), MX6_PAD_EIM_DA1__EPDC_SDLE | MUX_PAD_CTRL(EPDC_PAD_CTRL), MX6_PAD_EIM_EB1__EPDC_SDSHR | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_DA2__EPDC_BDR_0 | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_DA4__EPDC_SDCE_0 | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_DA5__EPDC_SDCE_1 | MUX_PAD_CTRL(EPDC_PAD_CTRL), - MX6_PAD_EIM_DA6__EPDC_SDCE_2 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_DA2__EPDC_BDR0 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_DA4__EPDC_SDCE0 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_DA5__EPDC_SDCE1 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_EIM_DA6__EPDC_SDCE2 | MUX_PAD_CTRL(EPDC_PAD_CTRL), }; static iomux_v3_cfg_t const epdc_disable_pads[] = { - MX6_PAD_EIM_A16__GPIO_2_22, - MX6_PAD_EIM_DA10__GPIO_3_10, - MX6_PAD_EIM_DA12__GPIO_3_12, - MX6_PAD_EIM_DA11__GPIO_3_11, - MX6_PAD_EIM_LBA__GPIO_2_27, - MX6_PAD_EIM_EB2__GPIO_2_30, - MX6_PAD_EIM_CS0__GPIO_2_23, - MX6_PAD_EIM_RW__GPIO_2_26, - MX6_PAD_EIM_A21__GPIO_2_17, - MX6_PAD_EIM_A22__GPIO_2_16, - MX6_PAD_EIM_A23__GPIO_6_6, - MX6_PAD_EIM_A24__GPIO_5_4, - MX6_PAD_EIM_D31__GPIO_3_31, - MX6_PAD_EIM_D27__GPIO_3_27, - MX6_PAD_EIM_DA1__GPIO_3_1, - MX6_PAD_EIM_EB1__GPIO_2_29, - MX6_PAD_EIM_DA2__GPIO_3_2, - MX6_PAD_EIM_DA4__GPIO_3_4, - MX6_PAD_EIM_DA5__GPIO_3_5, - MX6_PAD_EIM_DA6__GPIO_3_6, + MX6_PAD_EIM_A16__GPIO2_IO22, + MX6_PAD_EIM_DA10__GPIO3_IO10, + MX6_PAD_EIM_DA12__GPIO3_IO12, + MX6_PAD_EIM_DA11__GPIO3_IO11, + MX6_PAD_EIM_LBA__GPIO2_IO27, + MX6_PAD_EIM_EB2__GPIO2_IO30, + MX6_PAD_EIM_CS0__GPIO2_IO23, + MX6_PAD_EIM_RW__GPIO2_IO26, + MX6_PAD_EIM_A21__GPIO2_IO17, + MX6_PAD_EIM_A22__GPIO2_IO16, + MX6_PAD_EIM_A23__GPIO6_IO06, + MX6_PAD_EIM_A24__GPIO5_IO04, + MX6_PAD_EIM_D31__GPIO3_IO31, + MX6_PAD_EIM_D27__GPIO3_IO27, + MX6_PAD_EIM_DA1__GPIO3_IO01, + MX6_PAD_EIM_EB1__GPIO2_IO29, + MX6_PAD_EIM_DA2__GPIO3_IO02, + MX6_PAD_EIM_DA4__GPIO3_IO04, + MX6_PAD_EIM_DA5__GPIO3_IO05, + MX6_PAD_EIM_DA6__GPIO3_IO06, }; #endif @@ -286,6 +306,35 @@ struct fsl_esdhc_cfg usdhc_cfg[3] = { {USDHC4_BASE_ADDR}, }; +int mmc_get_env_devno(void) +{ + u32 soc_sbmr = readl(SRC_BASE_ADDR + 0x4); + u32 dev_no; + u32 bootsel; + + bootsel = (soc_sbmr & 0x000000FF) >> 6 ; + + /* If not boot from sd/mmc, use default value */ + if (bootsel != 1) + return CONFIG_SYS_MMC_ENV_DEV; + + /* BOOT_CFG2[3] and BOOT_CFG2[4] */ + dev_no = (soc_sbmr & 0x00001800) >> 11; + + /* need ubstract 1 to map to the mmc device id + * see the comments in board_mmc_init function + */ + + dev_no--; + + return dev_no; +} + +int mmc_map_to_kernel_blk(int dev_no) +{ + return dev_no + 1; +} + #define USDHC2_CD_GPIO IMX_GPIO_NR(2, 2) #define USDHC3_CD_GPIO IMX_GPIO_NR(2, 0) @@ -395,382 +444,143 @@ int board_mmc_init(bd_t *bis) } #endif -int mx6_rgmii_rework(struct phy_device *phydev) +int check_mmc_autodetect(void) { - unsigned short val; - - /* To enable AR8031 ouput a 125MHz clk from CLK_25M */ - phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7); - phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016); - phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007); - - val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe); - val &= 0xffe3; - val |= 0x18; - phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val); + char *autodetect_str = getenv("mmcautodetect"); - /* introduce tx clock delay */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); - val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); - val |= 0x0100; - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); + if ((autodetect_str != NULL) && + (strcmp(autodetect_str, "yes") == 0)) { + return 1; + } return 0; } -int board_phy_config(struct phy_device *phydev) +void board_late_mmc_env_init(void) { - mx6_rgmii_rework(phydev); + char cmd[32]; + char mmcblk[32]; + u32 dev_no = mmc_get_env_devno(); - if (phydev->drv->config) - phydev->drv->config(phydev); + if (!check_mmc_autodetect()) + return; - return 0; + setenv_ulong("mmcdev", dev_no); + + /* Set mmcblk env */ + sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", + mmc_map_to_kernel_blk(dev_no)); + setenv("mmcroot", mmcblk); + + sprintf(cmd, "mmc dev %d", dev_no); + run_command(cmd, 0); } -#if defined(CONFIG_VIDEO_IPUV3) -static void disable_lvds(struct display_info_t const *dev) +#if defined(CONFIG_MX6DL) && defined(CONFIG_MXC_EPDC) +#ifdef CONFIG_SPLASH_SCREEN +extern int mmc_get_env_devno(void); +int setup_splash_img(void) { - struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; +#ifdef CONFIG_SPLASH_IS_IN_MMC + int mmc_dev = mmc_get_env_devno(); + ulong offset = CONFIG_SPLASH_IMG_OFFSET; + ulong size = CONFIG_SPLASH_IMG_SIZE; + ulong addr = 0; + char *s = NULL; + struct mmc *mmc = find_mmc_device(mmc_dev); + uint blk_start, blk_cnt, n; - int reg = readl(&iomux->gpr[2]); + s = getenv("splashimage"); - reg &= ~(IOMUXC_GPR2_LVDS_CH0_MODE_MASK | - IOMUXC_GPR2_LVDS_CH1_MODE_MASK); + if (NULL == s) { + puts("env splashimage not found!\n"); + return -1; + } + addr = simple_strtoul(s, NULL, 16); - writel(reg, &iomux->gpr[2]); -} + if (!mmc) { + printf("MMC Device %d not found\n", mmc_dev); + return -1; + } -static void do_enable_hdmi(struct display_info_t const *dev) -{ - disable_lvds(dev); - imx_enable_hdmi_phy(); -} + if (mmc_init(mmc)) { + puts("MMC init failed\n"); + return -1; + } -static void enable_lvds(struct display_info_t const *dev) -{ - struct iomuxc *iomux = (struct iomuxc *) - IOMUXC_BASE_ADDR; - u32 reg = readl(&iomux->gpr[2]); - reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT | - IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT; - writel(reg, &iomux->gpr[2]); + blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len; + blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len; + n = mmc->block_dev.block_read(mmc_dev, blk_start, + blk_cnt, (u_char *)addr); + flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len); + + return (n == blk_cnt) ? 0 : -1; +#endif + + return 0; } +#endif -struct display_info_t const displays[] = {{ - .bus = -1, - .addr = 0, - .pixfmt = IPU_PIX_FMT_RGB666, - .detect = NULL, - .enable = enable_lvds, - .mode = { - .name = "Hannstar-XGA", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15385, - .left_margin = 220, - .right_margin = 40, - .upper_margin = 21, - .lower_margin = 7, - .hsync_len = 60, - .vsync_len = 10, - .sync = FB_SYNC_EXT, - .vmode = FB_VMODE_NONINTERLACED -} }, { - .bus = -1, - .addr = 0, - .pixfmt = IPU_PIX_FMT_RGB24, - .detect = detect_hdmi, - .enable = do_enable_hdmi, - .mode = { - .name = "HDMI", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 48, - .right_margin = 16, - .upper_margin = 33, - .lower_margin = 10, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED -} }, { - .bus = 0, - .addr = 0, - .pixfmt = IPU_PIX_FMT_RGB24, - .detect = NULL, - .enable = enable_rgb, - .mode = { - .name = "SEIKO-WVGA", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 29850, - .left_margin = 89, - .right_margin = 164, - .upper_margin = 23, - .lower_margin = 10, - .hsync_len = 10, - .vsync_len = 10, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED -} } }; -size_t display_count = ARRAY_SIZE(displays); +vidinfo_t panel_info = { + .vl_refresh = 85, + .vl_col = 800, + .vl_row = 600, + .vl_pixclock = 26666667, + .vl_left_margin = 8, + .vl_right_margin = 100, + .vl_upper_margin = 4, + .vl_lower_margin = 8, + .vl_hsync = 4, + .vl_vsync = 1, + .vl_sync = 0, + .vl_mode = 0, + .vl_flag = 0, + .vl_bpix = 3, + .cmap = 0, +}; -static void setup_display(void) +struct epdc_timing_params panel_timings = { + .vscan_holdoff = 4, + .sdoed_width = 10, + .sdoed_delay = 20, + .sdoez_width = 10, + .sdoez_delay = 20, + .gdclk_hp_offs = 419, + .gdsp_offs = 20, + .gdoe_offs = 0, + .gdclk_offs = 5, + .num_ce = 1, +}; + +static void setup_epdc_power(void) { - struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; - int reg; + /* Setup epdc voltage */ - /* Setup HSYNC, VSYNC, DISP_CLK for debugging purposes */ - imx_iomux_v3_setup_multiple_pads(di0_pads, ARRAY_SIZE(di0_pads)); + /* EIM_A17 - GPIO2[21] for PWR_GOOD status */ + imx_iomux_v3_setup_pad(MX6_PAD_EIM_A17__GPIO2_IO21 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + /* Set as input */ + gpio_direction_input(IMX_GPIO_NR(2, 21)); - enable_ipu_clock(); - imx_setup_hdmi(); + /* EIM_D17 - GPIO3[17] for VCOM control */ + imx_iomux_v3_setup_pad(MX6_PAD_EIM_D17__GPIO3_IO17 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); - /* Turn on LDB0, LDB1, IPU,IPU DI0 clocks */ - reg = readl(&mxc_ccm->CCGR3); - reg |= MXC_CCM_CCGR3_LDB_DI0_MASK | MXC_CCM_CCGR3_LDB_DI1_MASK; - writel(reg, &mxc_ccm->CCGR3); + /* Set as output */ + gpio_direction_output(IMX_GPIO_NR(3, 17), 1); - /* set LDB0, LDB1 clk select to 011/011 */ - reg = readl(&mxc_ccm->cs2cdr); - reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK - | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK); - reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) - | (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET); - writel(reg, &mxc_ccm->cs2cdr); + /* EIM_D20 - GPIO3[20] for EPD PMIC WAKEUP */ + imx_iomux_v3_setup_pad(MX6_PAD_EIM_D20__GPIO3_IO20 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + /* Set as output */ + gpio_direction_output(IMX_GPIO_NR(3, 20), 1); - reg = readl(&mxc_ccm->cscmr2); - reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV | MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV; - writel(reg, &mxc_ccm->cscmr2); - - reg = readl(&mxc_ccm->chsccdr); - reg |= (CHSCCDR_CLK_SEL_LDB_DI0 - << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET); - reg |= (CHSCCDR_CLK_SEL_LDB_DI0 - << MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET); - writel(reg, &mxc_ccm->chsccdr); - - reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES - | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW - | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW - | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG - | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT - | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG - | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT - | IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED - | IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0; - writel(reg, &iomux->gpr[2]); - - reg = readl(&iomux->gpr[3]); - reg = (reg & ~(IOMUXC_GPR3_LVDS1_MUX_CTL_MASK - | IOMUXC_GPR3_HDMI_MUX_CTL_MASK)) - | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 - << IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET); - writel(reg, &iomux->gpr[3]); -} -#endif /* CONFIG_VIDEO_IPUV3 */ - -/* - * Do not overwrite the console - * Use always serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} - -int board_eth_init(bd_t *bis) -{ - setup_iomux_enet(); - setup_pcie(); - - return cpu_eth_init(bis); -} - -#ifdef CONFIG_USB_EHCI_MX6 -#define USB_OTHERREGS_OFFSET 0x800 -#define UCTRL_PWR_POL (1 << 9) - -static iomux_v3_cfg_t const usb_otg_pads[] = { - MX6_PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usb_hc1_pads[] = { - MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static void setup_usb(void) -{ - imx_iomux_v3_setup_multiple_pads(usb_otg_pads, - ARRAY_SIZE(usb_otg_pads)); - - /* - * set daisy chain for otg_pin_id on 6q. - * for 6dl, this bit is reserved - */ - imx_iomux_set_gpr_register(1, 13, 1, 0); - - imx_iomux_v3_setup_multiple_pads(usb_hc1_pads, - ARRAY_SIZE(usb_hc1_pads)); -} - -int board_ehci_hcd_init(int port) -{ - u32 *usbnc_usb_ctrl; - - if (port > 1) - return -EINVAL; - - usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET + - port * 4); - - setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL); - - return 0; -} - -int board_ehci_power(int port, int on) -{ - switch (port) { - case 0: - break; - case 1: - if (on) - gpio_direction_output(IMX_GPIO_NR(1, 29), 1); - else - gpio_direction_output(IMX_GPIO_NR(1, 29), 0); - break; - default: - printf("MXC USB port %d not yet supported\n", port); - return -EINVAL; - } - - return 0; -} -#endif - -int board_early_init_f(void) -{ - setup_iomux_uart(); -#if defined(CONFIG_VIDEO_IPUV3) - setup_display(); -#endif - - return 0; -} - -#if defined(CONFIG_MX6DL) && defined(CONFIG_MXC_EPDC) -#ifdef CONFIG_SPLASH_SCREEN -extern int mmc_get_env_devno(void); -int setup_splash_img(void) -{ -#ifdef CONFIG_SPLASH_IS_IN_MMC - int mmc_dev = mmc_get_env_devno(); - ulong offset = CONFIG_SPLASH_IMG_OFFSET; - ulong size = CONFIG_SPLASH_IMG_SIZE; - ulong addr = 0; - char *s = NULL; - struct mmc *mmc = find_mmc_device(mmc_dev); - uint blk_start, blk_cnt, n; - - s = getenv("splashimage"); - - if (NULL == s) { - puts("env splashimage not found!\n"); - return -1; - } - addr = simple_strtoul(s, NULL, 16); - - if (!mmc) { - printf("MMC Device %d not found\n", mmc_dev); - return -1; - } - - if (mmc_init(mmc)) { - puts("MMC init failed\n"); - return -1; - } - - blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len; - blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len; - n = mmc->block_dev.block_read(mmc_dev, blk_start, - blk_cnt, (u_char *)addr); - flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len); - - return (n == blk_cnt) ? 0 : -1; -#endif - - return 0; -} -#endif - -vidinfo_t panel_info = { - .vl_refresh = 85, - .vl_col = 800, - .vl_row = 600, - .vl_pixclock = 26666667, - .vl_left_margin = 8, - .vl_right_margin = 100, - .vl_upper_margin = 4, - .vl_lower_margin = 8, - .vl_hsync = 4, - .vl_vsync = 1, - .vl_sync = 0, - .vl_mode = 0, - .vl_flag = 0, - .vl_bpix = 3, - .cmap = 0, -}; - -struct epdc_timing_params panel_timings = { - .vscan_holdoff = 4, - .sdoed_width = 10, - .sdoed_delay = 20, - .sdoez_width = 10, - .sdoez_delay = 20, - .gdclk_hp_offs = 419, - .gdsp_offs = 20, - .gdoe_offs = 0, - .gdclk_offs = 5, - .num_ce = 1, -}; - -static void setup_epdc_power(void) -{ - /* Setup epdc voltage */ - - /* EIM_A17 - GPIO2[21] for PWR_GOOD status */ - imx_iomux_v3_setup_pad(MX6_PAD_EIM_A17__GPIO_2_21 | - MUX_PAD_CTRL(EPDC_PAD_CTRL)); - /* Set as input */ - gpio_direction_input(IMX_GPIO_NR(2, 21)); - - /* EIM_D17 - GPIO3[17] for VCOM control */ - imx_iomux_v3_setup_pad(MX6_PAD_EIM_D17__GPIO_3_17 | - MUX_PAD_CTRL(EPDC_PAD_CTRL)); - - /* Set as output */ - gpio_direction_output(IMX_GPIO_NR(3, 17), 1); - - /* EIM_D20 - GPIO3[20] for EPD PMIC WAKEUP */ - imx_iomux_v3_setup_pad(MX6_PAD_EIM_D20__GPIO_3_20 | - MUX_PAD_CTRL(EPDC_PAD_CTRL)); - /* Set as output */ - gpio_direction_output(IMX_GPIO_NR(3, 20), 1); - - /* EIM_A18 - GPIO2[20] for EPD PWR CTL0 */ - imx_iomux_v3_setup_pad(MX6_PAD_EIM_A18__GPIO_2_20 | - MUX_PAD_CTRL(EPDC_PAD_CTRL)); - /* Set as output */ - gpio_direction_output(IMX_GPIO_NR(2, 20), 1); -} + /* EIM_A18 - GPIO2[20] for EPD PWR CTL0 */ + imx_iomux_v3_setup_pad(MX6_PAD_EIM_A18__GPIO2_IO20 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + /* Set as output */ + gpio_direction_output(IMX_GPIO_NR(2, 20), 1); +} int setup_waveform_file(void) { @@ -821,54 +631,55 @@ static void epdc_disable_pins(void) static void setup_epdc(void) { unsigned int reg; + struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR; /*** epdc Maxim PMIC settings ***/ /* EPDC PWRSTAT - GPIO2[21] for PWR_GOOD status */ - imx_iomux_v3_setup_pad(MX6_PAD_EIM_A17__GPIO_2_21 | + imx_iomux_v3_setup_pad(MX6_PAD_EIM_A17__GPIO2_IO21 | MUX_PAD_CTRL(EPDC_PAD_CTRL)); /* EPDC VCOM0 - GPIO3[17] for VCOM control */ - imx_iomux_v3_setup_pad(MX6_PAD_EIM_D17__GPIO_3_17 | + imx_iomux_v3_setup_pad(MX6_PAD_EIM_D17__GPIO3_IO17 | MUX_PAD_CTRL(EPDC_PAD_CTRL)); /* UART4 TXD - GPIO3[20] for EPD PMIC WAKEUP */ - imx_iomux_v3_setup_pad(MX6_PAD_EIM_D20__GPIO_3_20 | + imx_iomux_v3_setup_pad(MX6_PAD_EIM_D20__GPIO3_IO20 | MUX_PAD_CTRL(EPDC_PAD_CTRL)); /* EIM_A18 - GPIO2[20] for EPD PWR CTL0 */ - imx_iomux_v3_setup_pad(MX6_PAD_EIM_A18__GPIO_2_20 | + imx_iomux_v3_setup_pad(MX6_PAD_EIM_A18__GPIO2_IO20 | MUX_PAD_CTRL(EPDC_PAD_CTRL)); /*** Set pixel clock rates for EPDC ***/ /* EPDC AXI clk (IPU2_CLK) from PFD_400M, set to 396/2 = 198MHz */ - reg = readl(CCM_BASE_ADDR + CLKCTL_CSCDR3); + reg = readl(&ccm_regs->cscdr3); reg &= ~0x7C000; reg |= (1 << 16) | (1 << 14); - writel(reg, CCM_BASE_ADDR + CLKCTL_CSCDR3); + writel(reg, &ccm_regs->cscdr3); /* EPDC AXI clk enable */ - reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3); + reg = readl(&ccm_regs->CCGR3); reg |= 0x00C0; - writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3); + writel(reg, &ccm_regs->CCGR3); /* EPDC PIX clk (IPU2_DI1_CLK) from PLL5, set to 650/4/6 = ~27MHz */ - reg = readl(CCM_BASE_ADDR + CLKCTL_CSCDR2); + reg = readl(&ccm_regs->cscdr2); reg &= ~0x3FE00; reg |= (2 << 15) | (5 << 12); - writel(reg, CCM_BASE_ADDR + CLKCTL_CSCDR2); + writel(reg, &ccm_regs->cscdr2); /* PLL5 enable (defaults to 650) */ - reg = readl(ANATOP_BASE_ADDR + ANATOP_PLL_VIDEO); + reg = readl(&ccm_regs->analog_pll_video); reg &= ~((1 << 16) | (1 << 12)); reg |= (1 << 13); - writel(reg, ANATOP_BASE_ADDR + ANATOP_PLL_VIDEO); + writel(reg, &ccm_regs->analog_pll_video); /* EPDC PIX clk enable */ - reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3); + reg = readl(&ccm_regs->CCGR3); reg |= 0x0C00; - writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3); + writel(reg, &ccm_regs->CCGR3); panel_info.epdc_data.working_buf_addr = CONFIG_WORKING_BUF_ADDR; panel_info.epdc_data.waveform_buf_addr = CONFIG_WAVEFORM_BUF_ADDR; @@ -891,6 +702,7 @@ static void setup_epdc(void) void epdc_power_on(void) { unsigned int reg; + struct gpio_regs *gpio_regs = (struct gpio_regs *)GPIO2_BASE_ADDR; /* Set EPD_PWR_CTL0 to high - enable EINK_VDD (3.15) */ gpio_set_value(IMX_GPIO_NR(2, 20), 1); @@ -904,7 +716,7 @@ void epdc_power_on(void) /* Wait for PWRGOOD == 1 */ while (1) { - reg = readl(GPIO2_BASE_ADDR + GPIO_PSR); + reg = readl(&gpio_regs->gpio_psr); if (!(reg & (1 << 21))) break; @@ -932,6 +744,277 @@ void epdc_power_off(void) } #endif +int mx6_rgmii_rework(struct phy_device *phydev) +{ + unsigned short val; + + /* To enable AR8031 ouput a 125MHz clk from CLK_25M */ + phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7); + phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016); + phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007); + + val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe); + val &= 0xffe3; + val |= 0x18; + phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val); + + /* introduce tx clock delay */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); + val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); + val |= 0x0100; + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); + + return 0; +} + +int board_phy_config(struct phy_device *phydev) +{ + mx6_rgmii_rework(phydev); + + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +#if defined(CONFIG_VIDEO_IPUV3) +static void disable_lvds(struct display_info_t const *dev) +{ + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + + int reg = readl(&iomux->gpr[2]); + + reg &= ~(IOMUXC_GPR2_LVDS_CH0_MODE_MASK | + IOMUXC_GPR2_LVDS_CH1_MODE_MASK); + + writel(reg, &iomux->gpr[2]); +} + +static void do_enable_hdmi(struct display_info_t const *dev) +{ + disable_lvds(dev); + imx_enable_hdmi_phy(); +} + +static void enable_lvds(struct display_info_t const *dev) +{ + struct iomuxc *iomux = (struct iomuxc *) + IOMUXC_BASE_ADDR; + u32 reg = readl(&iomux->gpr[2]); + reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT | + IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT; + writel(reg, &iomux->gpr[2]); +} + +struct display_info_t const displays[] = {{ + .bus = -1, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB666, + .detect = NULL, + .enable = enable_lvds, + .mode = { + .name = "Hannstar-XGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = -1, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = detect_hdmi, + .enable = do_enable_hdmi, + .mode = { + .name = "HDMI", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 48, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = enable_rgb, + .mode = { + .name = "SEIKO-WVGA", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 29850, + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +} } }; +size_t display_count = ARRAY_SIZE(displays); + +static void setup_display(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + int reg; + + /* Setup HSYNC, VSYNC, DISP_CLK for debugging purposes */ + imx_iomux_v3_setup_multiple_pads(di0_pads, ARRAY_SIZE(di0_pads)); + + enable_ipu_clock(); + imx_setup_hdmi(); + + /* Turn on LDB0, LDB1, IPU,IPU DI0 clocks */ + reg = readl(&mxc_ccm->CCGR3); + reg |= MXC_CCM_CCGR3_LDB_DI0_MASK | MXC_CCM_CCGR3_LDB_DI1_MASK; + writel(reg, &mxc_ccm->CCGR3); + + /* set LDB0, LDB1 clk select to 011/011 */ + reg = readl(&mxc_ccm->cs2cdr); + reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK + | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK); + reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) + | (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET); + writel(reg, &mxc_ccm->cs2cdr); + + reg = readl(&mxc_ccm->cscmr2); + reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV | MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV; + writel(reg, &mxc_ccm->cscmr2); + + reg = readl(&mxc_ccm->chsccdr); + reg |= (CHSCCDR_CLK_SEL_LDB_DI0 + << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET); + reg |= (CHSCCDR_CLK_SEL_LDB_DI0 + << MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET); + writel(reg, &mxc_ccm->chsccdr); + + reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES + | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW + | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW + | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG + | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT + | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG + | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT + | IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED + | IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0; + writel(reg, &iomux->gpr[2]); + + reg = readl(&iomux->gpr[3]); + reg = (reg & ~(IOMUXC_GPR3_LVDS1_MUX_CTL_MASK + | IOMUXC_GPR3_HDMI_MUX_CTL_MASK)) + | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 + << IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET); + writel(reg, &iomux->gpr[3]); +} +#endif /* CONFIG_VIDEO_IPUV3 */ + +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) +{ + return 1; +} + +int board_eth_init(bd_t *bis) +{ + setup_iomux_enet(); + setup_pcie(); + + return cpu_eth_init(bis); +} + +#ifdef CONFIG_USB_EHCI_MX6 +#define USB_OTHERREGS_OFFSET 0x800 +#define UCTRL_PWR_POL (1 << 9) + +static iomux_v3_cfg_t const usb_otg_pads[] = { + MX6_PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usb_hc1_pads[] = { + MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void setup_usb(void) +{ + imx_iomux_v3_setup_multiple_pads(usb_otg_pads, + ARRAY_SIZE(usb_otg_pads)); + + /* + * set daisy chain for otg_pin_id on 6q. + * for 6dl, this bit is reserved + */ + imx_iomux_set_gpr_register(1, 13, 1, 0); + + imx_iomux_v3_setup_multiple_pads(usb_hc1_pads, + ARRAY_SIZE(usb_hc1_pads)); +} + +int board_ehci_hcd_init(int port) +{ + u32 *usbnc_usb_ctrl; + + if (port > 1) + return -EINVAL; + + usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET + + port * 4); + + setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL); + + return 0; +} + +int board_ehci_power(int port, int on) +{ + switch (port) { + case 0: + break; + case 1: + if (on) + gpio_direction_output(IMX_GPIO_NR(1, 29), 1); + else + gpio_direction_output(IMX_GPIO_NR(1, 29), 0); + break; + default: + printf("MXC USB port %d not yet supported\n", port); + return -EINVAL; + } + + return 0; +} +#endif + +int board_early_init_f(void) +{ + setup_iomux_uart(); +#if defined(CONFIG_VIDEO_IPUV3) + setup_display(); +#endif + + return 0; +} + int board_init(void) { /* address of boot parameters */ @@ -950,41 +1033,126 @@ int board_init(void) setup_epdc(); #endif +#ifdef CONFIG_CMD_SATA + setup_sata(); +#endif + return 0; } +static struct pmic *pfuze; int power_init_board(void) { - struct pmic *p; unsigned int reg, ret; - p = pfuze_common_init(I2C_PMIC); - if (!p) + pfuze = pfuze_common_init(I2C_PMIC); + if (!pfuze) return -ENODEV; - ret = pfuze_mode_init(p, APS_PFM); + ret = pfuze_mode_init(pfuze, APS_PFM); if (ret < 0) return ret; /* Increase VGEN3 from 2.5 to 2.8V */ - pmic_reg_read(p, PFUZE100_VGEN3VOL, ®); + pmic_reg_read(pfuze, PFUZE100_VGEN3VOL, ®); reg &= ~LDO_VOL_MASK; reg |= LDOB_2_80V; - pmic_reg_write(p, PFUZE100_VGEN3VOL, reg); + pmic_reg_write(pfuze, PFUZE100_VGEN3VOL, reg); /* Increase VGEN5 from 2.8 to 3V */ - pmic_reg_read(p, PFUZE100_VGEN5VOL, ®); + pmic_reg_read(pfuze, PFUZE100_VGEN5VOL, ®); reg &= ~LDO_VOL_MASK; reg |= LDOB_3_00V; - pmic_reg_write(p, PFUZE100_VGEN5VOL, reg); + pmic_reg_write(pfuze, PFUZE100_VGEN5VOL, reg); return 0; } -#ifdef CONFIG_MXC_SPI -int board_spi_cs_gpio(unsigned bus, unsigned cs) +#ifdef CONFIG_LDO_BYPASS_CHECK +void ldo_mode_set(int ldo_bypass) { - return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1; + unsigned int value; + int is_400M; + unsigned char vddarm; + struct pmic *p = pfuze; + + if (!p) { + printf("No PMIC found!\n"); + return; + } + + /* increase VDDARM/VDDSOC to support 1.2G chip */ + if (check_1_2G()) { + ldo_bypass = 0; /* ldo_enable on 1.2G chip */ + printf("1.2G chip, increase VDDARM_IN/VDDSOC_IN\n"); + /* increase VDDARM to 1.425V */ + pmic_reg_read(p, PFUZE100_SW1ABVOL, &value); + value &= ~0x3f; + value |= 0x2d; + pmic_reg_write(p, PFUZE100_SW1ABVOL, value); + + /* increase VDDSOC to 1.425V */ + pmic_reg_read(p, PFUZE100_SW1CVOL, &value); + value &= ~0x3f; + value |= 0x2d; + pmic_reg_write(p, PFUZE100_SW1CVOL, value); + } + /* switch to ldo_bypass mode , boot on 800Mhz */ + if (ldo_bypass) { + prep_anatop_bypass(); + + /* decrease VDDARM for 400Mhz DQ:1.1V, DL:1.275V */ + pmic_reg_read(p, PFUZE100_SW1ABVOL, &value); + value &= ~0x3f; +#if defined(CONFIG_MX6DL) + value |= 0x27; +#else + value |= 0x20; +#endif + pmic_reg_write(p, PFUZE100_SW1ABVOL, value); + + /* increase VDDSOC to 1.3V */ + pmic_reg_read(p, PFUZE100_SW1CVOL, &value); + value &= ~0x3f; + value |= 0x28; + pmic_reg_write(p, PFUZE100_SW1CVOL, value); + + /* + * MX6Q: + * VDDARM:1.15V@800M; VDDSOC:1.175V@800M + * VDDARM:0.975V@400M; VDDSOC:1.175V@400M + * MX6DL: + * VDDARM:1.175V@800M; VDDSOC:1.175V@800M + * VDDARM:1.075V@400M; VDDSOC:1.175V@400M + */ + is_400M = set_anatop_bypass(2); + if (is_400M) +#if defined(CONFIG_MX6DL) + vddarm = 0x1f; +#else + vddarm = 0x1b; +#endif + else +#if defined(CONFIG_MX6DL) + vddarm = 0x23; +#else + vddarm = 0x22; +#endif + + pmic_reg_read(p, PFUZE100_SW1ABVOL, &value); + value &= ~0x3f; + value |= vddarm; + pmic_reg_write(p, PFUZE100_SW1ABVOL, value); + + /* decrease VDDSOC to 1.175V */ + pmic_reg_read(p, PFUZE100_SW1CVOL, &value); + value &= ~0x3f; + value |= 0x23; + pmic_reg_write(p, PFUZE100_SW1CVOL, value); + + finish_anatop_bypass(); + printf("switch to ldo_bypass mode!\n"); + } } #endif @@ -1004,6 +1172,10 @@ int board_late_init(void) #ifdef CONFIG_CMD_BMODE add_board_boot_modes(board_boot_modes); #endif + +#ifdef CONFIG_ENV_IS_IN_MMC + board_late_mmc_env_init(); +#endif return 0; } diff --git a/board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg b/board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg new file mode 100644 index 0000000..6526db4 --- /dev/null +++ b/board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg @@ -0,0 +1,124 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * Jason Liu + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#define __ASSEMBLY__ +#include + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of spi, sd, sata + * the board has no nand and eimnor + * spinor: flash_offset: 0x0400 + * sata: flash_offset: 0x0400 + * sd/mmc: flash_offset: 0x0400 + */ + +/* the same flash_offset as sd */ +BOOT_FROM sd + +#ifdef CONFIG_USE_PLUGIN +/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/ +PLUGIN board/freescale/mx6sabresd/plugin.bin 0x00907000 +#else + +#ifdef CONFIG_SECURE_BOOT +CSF 0x2000 +#endif + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4, 0x020e0774, 0x000C0000 +DATA 4, 0x020e0754, 0x00000000 +DATA 4, 0x020e04ac, 0x00000030 +DATA 4, 0x020e04b0, 0x00000030 +DATA 4, 0x020e0464, 0x00000030 +DATA 4, 0x020e0490, 0x00000030 +DATA 4, 0x020e074c, 0x00000030 +DATA 4, 0x020e0494, 0x00000030 +DATA 4, 0x020e04a0, 0x00000000 +DATA 4, 0x020e04b4, 0x00000030 +DATA 4, 0x020e04b8, 0x00000030 +DATA 4, 0x020e076c, 0x00000030 +DATA 4, 0x020e0750, 0x00020000 +DATA 4, 0x020e04bc, 0x00000030 +DATA 4, 0x020e04c0, 0x00000030 +DATA 4, 0x020e04c4, 0x00000030 +DATA 4, 0x020e04c8, 0x00000030 +DATA 4, 0x020e0760, 0x00020000 +DATA 4, 0x020e0764, 0x00000030 +DATA 4, 0x020e0770, 0x00000030 +DATA 4, 0x020e0778, 0x00000030 +DATA 4, 0x020e077c, 0x00000030 +DATA 4, 0x020e0470, 0x00000030 +DATA 4, 0x020e0474, 0x00000030 +DATA 4, 0x020e0478, 0x00000030 +DATA 4, 0x020e047c, 0x00000030 +DATA 4, 0x021b0800, 0xa1390003 +DATA 4, 0x021b080c, 0x001F001F +DATA 4, 0x021b0810, 0x001F001F +DATA 4, 0x021b083c, 0x42190219 +DATA 4, 0x021b0840, 0x017B0177 +DATA 4, 0x021b0848, 0x4B4D4E4D +DATA 4, 0x021b0850, 0x3F3E2D36 +DATA 4, 0x021b081c, 0x33333333 +DATA 4, 0x021b0820, 0x33333333 +DATA 4, 0x021b0824, 0x33333333 +DATA 4, 0x021b0828, 0x33333333 +DATA 4, 0x021b08b8, 0x00000800 +DATA 4, 0x021b0004, 0x0002002D +DATA 4, 0x021b0008, 0x00333030 +DATA 4, 0x021b000c, 0x3F435313 +DATA 4, 0x021b0010, 0xB66E8B63 +DATA 4, 0x021b0014, 0x01FF00DB +DATA 4, 0x021b0018, 0x00001740 +DATA 4, 0x021b001c, 0x00008000 +DATA 4, 0x021b002c, 0x000026d2 +DATA 4, 0x021b0030, 0x00431023 +DATA 4, 0x021b0040, 0x00000017 +DATA 4, 0x021b0000, 0x83190000 +DATA 4, 0x021b001c, 0x04008032 +DATA 4, 0x021b001c, 0x00008033 +DATA 4, 0x021b001c, 0x00048031 +DATA 4, 0x021b001c, 0x05208030 +DATA 4, 0x021b001c, 0x04008040 +DATA 4, 0x021b0020, 0x00005800 +DATA 4, 0x021b0818, 0x00011117 +DATA 4, 0x021b0004, 0x0002556D +DATA 4, 0x021b0404, 0x00011006 +DATA 4, 0x021b001c, 0x00000000 + +/* set the default clock gate to save power */ +DATA 4, 0x020c4068, 0x00C03F3F +DATA 4, 0x020c406c, 0x0030FC03 +DATA 4, 0x020c4070, 0x0FFFC000 +DATA 4, 0x020c4074, 0x3FF00000 +DATA 4, 0x020c4078, 0x00FFF300 +DATA 4, 0x020c407c, 0x0F0000C3 +DATA 4, 0x020c4080, 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4, 0x020e0010, 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4, 0x020e0018, 0x007F007F +DATA 4, 0x020e001c, 0x007F007F +#endif diff --git a/configs/mx6qsabresd_sata_defconfig b/configs/mx6qsabresd_sata_defconfig new file mode 100644 index 0000000..6fe0722 --- /dev/null +++ b/configs/mx6qsabresd_sata_defconfig @@ -0,0 +1,7 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q,SYS_USE_SPINOR,SYS_BOOT_SATA" +CONFIG_ARM=y +CONFIG_TARGET_MX6SABRESD=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6solosabresd_defconfig b/configs/mx6solosabresd_defconfig new file mode 100644 index 0000000..9dbee56 --- /dev/null +++ b/configs/mx6solosabresd_defconfig @@ -0,0 +1,7 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg,MX6SOLO,SYS_USE_SPINOR,SYS_NOSMP="nosmp"" +CONFIG_ARM=y +CONFIG_TARGET_MX6SABRESD=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index e4165c2..4790be0 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012-2015 Freescale Semiconductor, Inc. * * Configuration settings for the Freescale i.MX6Q SabreSD board. * @@ -11,6 +11,16 @@ #define CONFIG_MX6 +#ifdef CONFIG_MX6SOLO +#define CONFIG_MX6DL +#endif + +/* uncomment for PLUGIN mode support */ +/* #define CONFIG_USE_PLUGIN */ + +/* uncomment for SECURE mode support */ +/* #define CONFIG_SECURE_BOOT */ + #include "mx6_common.h" #include @@ -58,6 +68,8 @@ #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ + #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII @@ -72,17 +84,6 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_ATHEROS -#define CONFIG_CMD_SF -#ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_MXC_SPI -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 20000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -#endif - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 @@ -100,24 +101,26 @@ #define CONFIG_LOADADDR 0x12000000 #define CONFIG_SYS_TEXT_BASE 0x17800000 +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + #ifdef CONFIG_SYS_BOOT_NAND -#define CONFIG_MFG_NAND_PARTITION "mtdparts=gpmi-nand:16m(boot),16m(kernel),16m(dtb),-(rootfs) " +#define CONFIG_MFG_NAND_PARTITION "mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),-(rootfs) " #else #define CONFIG_MFG_NAND_PARTITION "" #endif #define CONFIG_MFG_ENV_SETTINGS \ - "mfgtool_args=setenv bootargs console=" CONFIG_CONSOLE_DEV ",115200 " \ - "rdinit=/linuxrc " \ - "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ - "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ - "g_mass_storage.iSerialNumber=\"\" "\ - "enable_wait_mode=off "\ - CONFIG_MFG_NAND_PARTITION \ - "\0" \ - "initrd_addr=0x12C00000\0" \ - "initrd_high=0xffffffff\0" \ - "bootcmd_mfg=run mfgtool_args;bootm ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ + "mfgtool_args=setenv bootargs console=" CONFIG_CONSOLE_DEV ",115200 " \ + "rdinit=/linuxrc " \ + "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ + "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ + "g_mass_storage.iSerialNumber=\"\" "\ + "enable_wait_mode=off "\ + CONFIG_MFG_NAND_PARTITION \ + "\0" \ + "initrd_addr=0x12C00000\0" \ + "initrd_high=0xffffffff\0" \ + "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ #ifdef CONFIG_SUPPORT_EMMC_BOOT #define EMMC_ENV \ @@ -139,6 +142,42 @@ #define EMMC_ENV "" #endif +#if defined(CONFIG_SYS_BOOT_NAND) + /* + * The dts also enables the WEIN NOR which is mtd0. + * So the partions' layout for NAND is: + * mtd1: 16M (uboot) + * mtd2: 16M (kernel) + * mtd3: 16M (dtb) + * mtd4: left (rootfs) + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_MFG_ENV_SETTINGS \ + "fdt_addr=0x18000000\0" \ + "fdt_high=0xffffffff\0" \ + "bootargs=console=" CONFIG_CONSOLE_DEV ",115200 ubi.mtd=4 " \ + "root=ubi0:rootfs rootfstype=ubifs " \ + "mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),-(rootfs)\0"\ + "bootcmd=nand read ${loadaddr} 0x4000000 0x800000;"\ + "nand read ${fdt_addr} 0x5000000 0x100000;"\ + "bootz ${loadaddr} - ${fdt_addr}\0" + +#elif defined(CONFIG_SYS_BOOT_SATA) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_MFG_ENV_SETTINGS \ + "fdt_addr=0x18000000\0" \ + "fdt_high=0xffffffff\0" \ + "bootargs=console=" CONFIG_CONSOLE_DEV ",115200 \0"\ + "bootargs_sata=setenv bootargs ${bootargs} " \ + "root=/dev/sda1 rootwait rw \0" \ + "bootcmd_sata=run bootargs_sata; sata init; " \ + "sata read ${loadaddr} 0x800 0x4000; " \ + "sata read ${fdt_addr} 0x8000 0x800; " \ + "bootz ${loadaddr} - ${fdt_addr} \0" \ + "bootcmd=run bootcmd_sata \0" + +#else #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_MFG_ENV_SETTINGS \ "script=boot.scr\0" \ @@ -151,8 +190,9 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=1\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcautodetect=yes\0" \ "update_sd_firmware=" \ "if test ${ip_dyn} = yes; then " \ "setenv get_cmd dhcp; " \ @@ -167,7 +207,8 @@ "fi; " \ "fi\0" \ EMMC_ENV \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "smp=" CONFIG_SYS_NOSMP "\0"\ + "mmcargs=setenv bootargs console=${console},${baudrate} ${smp} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ @@ -190,7 +231,7 @@ "else " \ "bootz; " \ "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ + "netargs=setenv bootargs console=${console},${baudrate} ${smp} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ @@ -227,6 +268,7 @@ "fi; " \ "fi; " \ "else run netboot; fi" +#endif #define CONFIG_ARP_TIMEOUT 200UL @@ -235,10 +277,14 @@ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_CBSIZE 1024 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 256 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x10010000 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 @@ -266,10 +312,97 @@ #define CONFIG_ENV_SIZE (8 * 1024) +#ifndef CONFIG_SYS_NOSMP +#define CONFIG_SYS_NOSMP +#endif + +#if defined CONFIG_SYS_BOOT_SPINOR +#define CONFIG_SYS_USE_SPINOR +#define CONFIG_ENV_IS_IN_SPI_FLASH +#elif defined CONFIG_SYS_BOOT_EIMNOR +#define CONFIG_SYS_USE_EIMNOR +#define CONFIG_ENV_IS_IN_FLASH +#elif defined CONFIG_SYS_BOOT_NAND +#define CONFIG_SYS_USE_NAND +#define CONFIG_ENV_IS_IN_NAND +#elif defined CONFIG_SYS_BOOT_SATA +#define CONFIG_ENV_IS_IN_SATA +#define CONFIG_CMD_SATA +#else #define CONFIG_ENV_IS_IN_MMC +#endif + +#ifdef CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA +#endif + +#ifdef CONFIG_SYS_USE_SPINOR +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) +#endif + +#ifdef CONFIG_SYS_USE_EIMNOR +#undef CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR +#define CONFIG_SYS_FLASH_SECT_SIZE (128 * 1024) +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/cfi_flash.c */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use buffered writes*/ +#define CONFIG_SYS_FLASH_EMPTY_INFO +#endif + +#ifdef CONFIG_SYS_USE_NAND +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS + +/* NAND stuff */ +#define CONFIG_NAND_MXS +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* DMA stuff, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 +#endif #if defined(CONFIG_ENV_IS_IN_MMC) #define CONFIG_ENV_OFFSET (8 * 64 * 1024) +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) +#define CONFIG_ENV_OFFSET (768 * 1024) +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#elif defined(CONFIG_ENV_IS_IN_FLASH) +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE CONFIG_SYS_FLASH_SECT_SIZE +#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SIZE +#define CONFIG_ENV_OFFSET (4 * CONFIG_SYS_FLASH_SECT_SIZE) +#elif defined(CONFIG_ENV_IS_IN_NAND) +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_OFFSET (8 << 20) +#define CONFIG_ENV_SECT_SIZE (128 << 10) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#elif defined(CONFIG_ENV_IS_IN_SATA) +#define CONFIG_ENV_OFFSET (768 * 1024) +#define CONFIG_SATA_ENV_DEV 0 +#define CONFIG_SYS_DCACHE_OFF /* remove when sata driver support cache */ #endif #define CONFIG_OF_LIBFDT @@ -278,6 +411,12 @@ #define CONFIG_CMD_CACHE #endif +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + /* Framebuffer */ #define CONFIG_VIDEO #define CONFIG_VIDEO_IPUV3 @@ -315,4 +454,7 @@ #define CONFIG_G_DNL_MANUFACTURER "FSL" #endif +#if defined(CONFIG_ANDROID_SUPPORT) +#include "mx6sabreandroid_common.h" +#endif #endif /* __MX6QSABRE_COMMON_CONFIG_H */ diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 72ba245..d44a9cb 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012-2015 Freescale Semiconductor, Inc. * * Configuration settings for the Freescale i.MX6Q SabreSD board. * @@ -21,24 +21,40 @@ #define CONFIG_MACH_TYPE 3980 #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONSOLE_DEV "ttymxc0" -#define CONFIG_MMCROOT "/dev/mmcblk1p2" +#define CONFIG_MMCROOT "/dev/mmcblk2p2" /* SDHC3 */ #if defined(CONFIG_MX6Q) #define CONFIG_DEFAULT_FDT_FILE "imx6q-sabresd.dtb" +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) #elif defined(CONFIG_MX6DL) #define CONFIG_DEFAULT_FDT_FILE "imx6dl-sabresd.dtb" -#endif #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) - -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ +#elif defined(CONFIG_MX6SOLO) +#define CONFIG_DEFAULT_FDT_FILE "imx6dl-sabresd.dtb" +#define PHYS_SDRAM_SIZE (512u * 1024 * 1024) +#endif #include "mx6sabre_common.h" #define CONFIG_SYS_FSL_USDHC_NUM 3 -#if defined(CONFIG_ENV_IS_IN_MMC) #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */ +#define CONFIG_SYS_MMC_ENV_PART 0 /* user partition */ + +#ifdef CONFIG_SYS_USE_SPINOR +#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(4, 9)<<8)) #endif -#define CONFIG_CMD_PCI +/* + * imx6 q/dl/solo pcie would be failed to work properly in kernel, if + * the pcie module is iniialized/enumerated both in uboot and linux + * kernel. + * rootcause:imx6 q/dl/solo pcie don't have the reset mechanism. + * it is only be RESET by the POR. So, the pcie module only be + * initialized/enumerated once in one POR. + * Set to use pcie in kernel defaultly, mask the pcie config here. + * Remove the mask freely, if the uboot pcie functions, rather than + * the kernel's, are required. + */ +/* #define CONFIG_CMD_PCI */ #ifdef CONFIG_CMD_PCI #define CONFIG_PCI #define CONFIG_PCI_PNP @@ -48,12 +64,6 @@ #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) #endif -/* I2C Configs */ -#define CONFIG_CMD_I2C -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_SPEED 100000 - /* PMIC */ #define CONFIG_POWER #define CONFIG_POWER_I2C -- cgit v1.1