From 7ebb4479b07ff294eb4d76e420753a0349f7c93b Mon Sep 17 00:00:00 2001 From: Ulf Samuelsson Date: Thu, 24 May 2007 12:12:47 +0200 Subject: [PATCH][NAND] Define the Vendor Id for Micron NAND Flash Signed-off-by: Ulf Samuelsson Signed-off-by: Ladislav Michl Signed-off-by: Stefan Roese --- drivers/nand/nand_ids.c | 1 + include/linux/mtd/nand.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/nand/nand_ids.c b/drivers/nand/nand_ids.c index 8b58736..70fdfd3 100644 --- a/drivers/nand/nand_ids.c +++ b/drivers/nand/nand_ids.c @@ -123,6 +123,7 @@ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_NATIONAL, "National"}, {NAND_MFR_RENESAS, "Renesas"}, {NAND_MFR_STMICRO, "ST Micro"}, + {NAND_MFR_MICRON, "Micron"}, {0x0, "Unknown"} }; #endif diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 4b48564..49ff80f 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -348,6 +348,7 @@ struct nand_chip { #define NAND_MFR_NATIONAL 0x8f #define NAND_MFR_RENESAS 0x07 #define NAND_MFR_STMICRO 0x20 +#define NAND_MFR_MICRON 0x2c /** * struct nand_flash_dev - NAND Flash Device ID Structure -- cgit v1.1 From 8e585f02f82c17cc66cd229dbf0fd3066bbbf658 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Mon, 18 Jun 2007 13:50:13 -0500 Subject: Added M5329AFEE and M5329BFEE Platforms Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, include/configs/M5329EVB.h, lib_m68k/interrupts.c, and rtc/mcfrtc.c Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, lib_m68k/time.c, net/eth.c and rtc/Makefile Signed-off-by: TsiChung Liew --- CREDITS | 6 + MAKEALL | 2 +- Makefile | 14 + README | 5 + board/freescale/m5329evb/Makefile | 44 + board/freescale/m5329evb/config.mk | 25 + board/freescale/m5329evb/flash.c | 643 +++++++++++ board/freescale/m5329evb/m5329evb.c | 376 +++++++ board/freescale/m5329evb/u-boot.lds | 144 +++ common/cmd_bdinfo.c | 53 + common/cmd_mii.c | 2 +- cpu/mcf532x/Makefile | 48 + cpu/mcf532x/config.mk | 27 + cpu/mcf532x/cpu.c | 134 +++ cpu/mcf532x/cpu_init.c | 126 +++ cpu/mcf532x/speed.c | 222 ++++ cpu/mcf532x/start.S | 338 ++++++ drivers/net/Makefile | 45 + drivers/net/mcffec.c | 594 ++++++++++ drivers/serial/Makefile | 45 + drivers/serial/mcfserial.c | 126 +++ include/asm-m68k/byteorder.h | 102 +- include/asm-m68k/fec.h | 241 ++++- include/asm-m68k/immap_5329.h | 793 ++++++++++++++ include/asm-m68k/io.h | 214 +++- include/asm-m68k/m5329.h | 2023 +++++++++++++++++++++++++++++++++++ include/asm-m68k/mcfrtc.h | 108 ++ include/asm-m68k/mcftimer.h | 144 ++- include/asm-m68k/mcfuart.h | 328 ++++-- include/asm-m68k/ptrace.h | 44 +- include/asm-m68k/u-boot.h | 48 +- include/configs/M5329EVB.h | 275 +++++ lib_m68k/Makefile | 2 +- lib_m68k/board.c | 67 +- lib_m68k/interrupts.c | 118 ++ lib_m68k/time.c | 167 ++- net/eth.c | 1 + rtc/Makefile | 3 +- rtc/mcfrtc.c | 120 +++ 39 files changed, 7629 insertions(+), 188 deletions(-) mode change 100755 => 100644 MAKEALL mode change 100644 => 100755 Makefile create mode 100644 board/freescale/m5329evb/Makefile create mode 100644 board/freescale/m5329evb/config.mk create mode 100644 board/freescale/m5329evb/flash.c create mode 100644 board/freescale/m5329evb/m5329evb.c create mode 100644 board/freescale/m5329evb/u-boot.lds create mode 100644 cpu/mcf532x/Makefile create mode 100644 cpu/mcf532x/config.mk create mode 100644 cpu/mcf532x/cpu.c create mode 100644 cpu/mcf532x/cpu_init.c create mode 100644 cpu/mcf532x/speed.c create mode 100644 cpu/mcf532x/start.S create mode 100644 drivers/net/Makefile create mode 100644 drivers/net/mcffec.c create mode 100644 drivers/serial/Makefile create mode 100644 drivers/serial/mcfserial.c create mode 100644 include/asm-m68k/immap_5329.h create mode 100644 include/asm-m68k/m5329.h create mode 100644 include/asm-m68k/mcfrtc.h create mode 100644 include/configs/M5329EVB.h create mode 100644 lib_m68k/interrupts.c create mode 100644 rtc/mcfrtc.c diff --git a/CREDITS b/CREDITS index 7af1b80..8558a40 100644 --- a/CREDITS +++ b/CREDITS @@ -479,3 +479,9 @@ N: Michal Simek E: monstr@monstr.eu D: Support for Microblaze, ML401, XUPV2P board W: www.monstr.eu + +N: TsiChung Liew +E: Tsi-Chung.Liew@freescale.com +D: Support for ColdFire MCF532x +W: www.freescale.com + diff --git a/MAKEALL b/MAKEALL old mode 100755 new mode 100644 index 0e4e744..22c6c6d --- a/MAKEALL +++ b/MAKEALL @@ -306,7 +306,7 @@ LIST_microblaze=" \ LIST_coldfire=" \ cobra5272 EB+MCF-EV123 EB+MCF-EV123_internal \ idmr M5271EVB M5272C3 M5282EVB \ - TASREG r5200 M5271EVB \ + TASREG r5200 M5271EVB M5329EVB \ " ######################################################################### diff --git a/Makefile b/Makefile old mode 100644 new mode 100755 index d5e220a..8a728a4 --- a/Makefile +++ b/Makefile @@ -207,9 +207,11 @@ LIBS += dtt/libdtt.a LIBS += drivers/libdrivers.a LIBS += drivers/nand/libnand.a LIBS += drivers/nand_legacy/libnand_legacy.a +LIBS += drivers/net/libnet.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a endif +LIBS += drivers/serial/libserial.a LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/drivers/libpostdrivers.a LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \ @@ -1637,6 +1639,18 @@ TASREG_config : unconfig r5200_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200 +M5329AFEE_config \ +M5329BFEE_config : unconfig + @case "$@" in \ + M5329AFEE_config) NAND=0;; \ + M5329BFEE_config) NAND=16;; \ + esac; \ + >include/config.h ; \ + if [ "$${NAND}" != "0" ] ; then \ + echo "#define NANDFLASH_SIZE $${NAND}" >> include/config.h ; \ + fi + @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale + ######################################################################### ## MPC83xx Systems ######################################################################### diff --git a/README b/README index bb5b46e..dd12cd7 100644 --- a/README +++ b/README @@ -136,6 +136,7 @@ Directory Hierarchy: - i386 Files specific to i386 CPUs - ixp Files specific to Intel XScale IXP CPUs - mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs + - mcf532x Files specific to Freescale ColdFire MCF5329 CPUs - mips Files specific to MIPS CPUs - mpc5xx Files specific to Freescale MPC5xx CPUs - mpc5xxx Files specific to Freescale MPC5xxx CPUs @@ -251,6 +252,10 @@ The following options need to be configured: CONFIG_PXA250 CONFIG_CPU_MONAHANS + ColdFire based CPUs: + -------------------- + CONFIG_M5329 + MicroBlaze based CPUs: ---------------------- CONFIG_MICROBLAZE diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile new file mode 100644 index 0000000..f94ee9d --- /dev/null +++ b/board/freescale/m5329evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o flash.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5329evb/config.mk b/board/freescale/m5329evb/config.mk new file mode 100644 index 0000000..ce014ed --- /dev/null +++ b/board/freescale/m5329evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m5329evb/flash.c b/board/freescale/m5329evb/flash.c new file mode 100644 index 0000000..7d3b0e8 --- /dev/null +++ b/board/freescale/m5329evb/flash.c @@ -0,0 +1,643 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#ifndef CFG_FLASH_CFI + +typedef unsigned short FLASH_PORT_WIDTH; +typedef volatile unsigned short FLASH_PORT_WIDTHV; + +#define PHYS_FLASH_1 CFG_FLASH_BASE +#define FLASH_BANK_SIZE 0x200000 + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +/* Intel-compatible flash commands */ +#define INTEL_PROGRAM 0x00100010 +#define INTEL_ERASE 0x00200020 +#define INTEL_WRSETUP 0x00400040 +#define INTEL_CLEAR 0x00500050 +#define INTEL_LOCKBIT 0x00600060 +#define INTEL_PROTECT 0x00010001 +#define INTEL_STATUS 0x00700070 +#define INTEL_READID 0x00900090 +#define INTEL_CFIQRY 0x00980098 +#define INTEL_SUSERASE 0x00B000B0 +#define INTEL_PROTPROG 0x00C000C0 +#define INTEL_CONFIRM 0x00D000D0 +#define INTEL_RESET 0x00FF00FF + +/* Intel-compatible flash status bits */ +#define INTEL_FINISHED 0x00800080 +#define INTEL_OK 0x00800080 +#define INTEL_ERASESUS 0x00600060 +#define INTEL_WSM_SUS (INTEL_FINISHED | INTEL_ERASESUS) + +/* 28F160C3B CFI Data offset - This could vary */ +#define INTEL_CFI_MFG 0x00 /* Manufacturer ID */ +#define INTEL_CFI_PART 0x01 /* Product ID */ +#define INTEL_CFI_LOCK 0x02 /* */ +#define INTEL_CFI_TWPRG 0x1F /* Typical Single Word Program Timeout 2^n us */ +#define INTEL_CFI_MBUFW 0x20 /* Typical Max Buffer Write Timeout 2^n us */ +#define INTEL_CFI_TERB 0x21 /* Typical Block Erase Timeout 2^n ms */ +#define INTEL_CFI_MWPRG 0x23 /* Maximum Word program timeout 2^n us */ +#define INTEL_CFI_MERB 0x25 /* Maximum Block Erase Timeout 2^n s */ +#define INTEL_CFI_SIZE 0x27 /* Device size 2^n bytes */ +#define INTEL_CFI_BANK 0x2C /* Number of Bank */ +#define INTEL_CFI_SZ1A 0x2F /* Block Region Size */ +#define INTEL_CFI_SZ1B 0x30 +#define INTEL_CFI_SZ2A 0x33 +#define INTEL_CFI_SZ2B 0x34 +#define INTEL_CFI_BLK1 0x2D /* Number of Blocks */ +#define INTEL_CFI_BLK2 0x31 + +#define WR_BLOCK 0x20 + +#define SYNC __asm__("nop") + +/*----------------------------------------------------------------------- + * Functions + */ + +ulong flash_get_size(FPWV * addr, flash_info_t * info); +int flash_get_offsets(ulong base, flash_info_t * info); +int flash_cmd_rd(FPWV * addr, int index); +int write_data(flash_info_t * info, ulong dest, FPW data); +void flash_sync_real_protect(flash_info_t * info); +uchar intel_sector_protected(flash_info_t * info, ushort sector); + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +ulong flash_init(void) +{ + FPWV *flash_addr[CFG_MAX_FLASH_BANKS]; + ulong size; + int i; + + flash_addr[0] = (FPW *) CFG_FLASH0_BASE; +#ifdef CFG_FLASH1_BASE + flash_addr[1] = (FPW *) CFG_FLASH1_BASE; +#endif + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + memset(&flash_info[i], 0, sizeof(flash_info_t)); + + size = flash_get_size(flash_addr[i], &flash_info[i]); + flash_protect(FLAG_PROTECT_CLEAR, + flash_info[i].start[0], + flash_info[i].start[0] + size - 1, + &flash_info[0]); + /* get the h/w and s/w protection status in sync */ + flash_sync_real_protect(&flash_info[i]); + } + + /* Protect monitor and environment sectors */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); + + return size; +} + +void flash_print_info(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf("INTEL "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + printf("28F160C3B\n"); + break; + case FLASH_28F160C3T: + printf("28F160C3T\n"); + break; + case FLASH_28F320C3B: + printf("28F320C3B\n"); + break; + case FLASH_28F320C3T: + printf("28F320C3T\n"); + break; + case FLASH_28F640C3B: + printf("28F640C3B\n"); + break; + case FLASH_28F640C3T: + printf("28F640C3T\n"); + break; + default: + printf("Unknown Chip Type\n"); + return; + } + + if (info->size > 0x100000) { + int remainder; + + printf(" Size: %ld", info->size >> 20); + + remainder = (info->size % 0x100000); + if (remainder) { + remainder >>= 10; + remainder = (int)((float) + (((float)remainder / (float)1024) * + 10000)); + printf(".%d ", remainder); + } + + printf("MB in %d Sectors\n", info->sector_count); + } else + printf(" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], info->protect[i] ? " (RO)" : " "); + } + printf("\n"); +} + +/* + * The following code cannot be run from FLASH! + */ +ulong flash_get_size(FPWV * addr, flash_info_t * info) +{ + int intel = 0; + u16 value; + static int bank = 0; + + /* Write auto select command: read Manufacturer ID */ + /* Write auto select command sequence and test FLASH answer */ + *addr = (FPW) INTEL_RESET; /* restore read mode */ + *addr = (FPW) INTEL_READID; + + switch (addr[INTEL_CFI_MFG] & 0xff) { + case (ushort) INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + value = addr[INTEL_CFI_PART]; + intel = 1; + break; + default: + printf("Unknown Flash\n"); + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + *addr = (FPW) INTEL_RESET; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + switch (value) { + case (u16) INTEL_ID_28F160C3B: + info->flash_id += FLASH_28F160C3B; + break; + case (u16) INTEL_ID_28F160C3T: + info->flash_id += FLASH_28F160C3T; + break; + case (u16) INTEL_ID_28F320C3B: + info->flash_id += FLASH_28F320C3B; + break; + case (u16) INTEL_ID_28F320C3T: + info->flash_id += FLASH_28F320C3T; + break; + case (u16) INTEL_ID_28F640C3B: + info->flash_id += FLASH_28F640C3B; + break; + case (u16) INTEL_ID_28F640C3T: + info->flash_id += FLASH_28F640C3T; + break; + default: + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (intel) { + /* Intel spec. under CFI section */ + u32 sz, size, offset; + int sec, sectors, bs; + int part, i, j, cnt; + + part = flash_cmd_rd(addr, INTEL_CFI_BANK); + + /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. + * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count + * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count + */ + offset = (u32) addr; + sectors = sec = 0; + size = sz = cnt = 0; + for (i = 0; i < part; i++) { + bs = (((addr[INTEL_CFI_SZ1B + i * 4] << 8) | + addr[INTEL_CFI_SZ1A + i * 4]) * 0x100); + sec = addr[INTEL_CFI_BLK1 + i * 4] + 1; + sz = bs * sec; + + for (j = 0; j < sec; j++) { + info->start[cnt++] = offset; + offset += bs; + } + + sectors += sec; + size += sz; + } + info->sector_count = sectors; + info->size = size; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + *addr = (FPW) INTEL_RESET; /* restore read mode */ + + return (info->size); +} + +int flash_cmd_rd(FPWV * addr, int index) +{ + return (int)addr[index]; +} + +/* + * This function gets the u-boot flash sector protection status + * (flash_info_t.protect[]) in sync with the sector protection + * status stored in hardware. + */ +void flash_sync_real_protect(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + for (i = 0; i < info->sector_count; ++i) { + info->protect[i] = intel_sector_protected(info, i); + } + break; + default: + /* no h/w protect support */ + break; + } +} + +/* + * checks if "sector" in bank "info" is protected. Should work on intel + * strata flash chips 28FxxxJ3x in 8-bit mode. + * Returns 1 if sector is protected (or timed-out while trying to read + * protection status), 0 if it is not. + */ +uchar intel_sector_protected(flash_info_t * info, ushort sector) +{ + FPWV *addr; + FPWV *lock_conf_addr; + ulong start; + unsigned char ret; + + /* + * first, wait for the WSM to be finished. The rationale for + * waiting for the WSM to become idle for at most + * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy + * because of: (1) erase, (2) program or (3) lock bit + * configuration. So we just wait for the longest timeout of + * the (1)-(3), i.e. the erase timeout. + */ + + /* wait at least 35ns (W12) before issuing Read Status Register */ + /*udelay(1); */ + addr = (FPWV *) info->start[sector]; + *addr = (FPW) INTEL_STATUS; + + start = get_timer(0); + while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { + if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) { + *addr = (FPW) INTEL_RESET; /* restore read mode */ + printf("WSM busy too long, can't get prot status\n"); + return 1; + } + } + + /* issue the Read Identifier Codes command */ + *addr = (FPW) INTEL_READID; + + /* Intel example code uses offset of 4 for 8-bit flash */ + lock_conf_addr = (FPWV *) info->start[sector]; + ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0; + + /* put flash back in read mode */ + *addr = (FPW) INTEL_RESET; + + return ret; +} + +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type, start, last; + int rcode = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) + printf("- missing\n"); + else + printf("- no sectors to erase\n"); + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + if ((type != FLASH_MAN_INTEL)) { + type = (info->flash_id & FLASH_VENDMASK); + printf("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + else + printf("\n"); + + start = get_timer(0); + last = start; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + + FPWV *addr = (FPWV *) (info->start[sect]); + int min = 0; + + printf("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + *addr = (FPW) INTEL_READID; + min = addr[INTEL_CFI_TERB]; + min = 1 << min; /* ms */ + min = (min / info->sector_count) * 1000; + + /* start erase block */ + *addr = (FPW) INTEL_CLEAR; /* clear status register */ + *addr = (FPW) INTEL_ERASE; /* erase setup */ + *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ + + while ((*addr & (FPW) INTEL_FINISHED) != + (FPW) INTEL_FINISHED) { + + if (get_timer(start) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *addr = (FPW) INTEL_SUSERASE; /* suspend erase */ + *addr = (FPW) INTEL_RESET; /* reset to read mode */ + + rcode = 1; + break; + } + } + + *addr = (FPW) INTEL_RESET; /* resest to read mode */ + + printf(" done\n"); + } + } + + return rcode; +} + +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + if (info->flash_id == FLASH_UNKNOWN) + return 4; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + { + ulong cp, wp; + FPW data; + int i, l, rc, port_width; + + /* get lower word aligned address */ + wp = addr; + port_width = 1; + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + + for (; cnt == 0 && i < port_width; ++i, ++cp) + data = (data << 8) | (*(uchar *) cp); + + if ((rc = write_data(info, wp, data)) != 0) + return (rc); + + wp += port_width; + } + + /* handle word aligned part */ + while (cnt >= 2) { + data = *((FPW *) src); + + if ((rc = + write_data(info, (ulong) ((FPWV *) wp), + (FPW) data)) != 0) { + return (rc); + } + + src += sizeof(FPW); + wp += sizeof(FPW); + cnt -= sizeof(FPW); + } + + if (cnt == 0) + return ERR_OK; + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { + data = (data >> 8) | (*src++ << 8); + --cnt; + } + for (; i < 2; ++i, ++cp) { + data |= (*(uchar *) cp); + } + + return write_data(info, (ulong) ((FPWV *) wp), + (FPW) data); + + } /* case FLASH_MAN_INTEL */ + + } /* switch */ + + return ERR_OK; +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_data(flash_info_t * info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + ulong start; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + printf("not erased at %08lx (%lx)\n", (ulong) addr, + (ulong) * addr); + return (2); + } + + /* Disable interrupts which might cause a timeout here */ + flag = (int)disable_interrupts(); + + *addr = (FPW) INTEL_CLEAR; + *addr = (FPW) INTEL_RESET; + + *addr = (FPW) INTEL_WRSETUP; /* write setup */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) INTEL_SUSERASE; /* suspend mode */ + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* reset */ + return (1); + } + } + + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* restore read mode */ + + return (0); +} + +#ifdef CFG_FLASH_PROTECTION +/*----------------------------------------------------------------------- + */ +int flash_real_protect(flash_info_t * info, long sector, int prot) +{ + int rcode = 0; /* assume success */ + FPWV *addr; /* address of sector */ + FPW value; + + addr = (FPWV *) (info->start[sector]); + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + *addr = (FPW) INTEL_RESET; /* make sure in read mode */ + *addr = (FPW) INTEL_LOCKBIT; /* lock command setup */ + + if (prot) + *addr = (FPW) INTEL_PROTECT; /* lock sector */ + else + *addr = (FPW) INTEL_CONFIRM; /* unlock sector */ + + /* now see if it really is locked/unlocked as requested */ + *addr = (FPW) INTEL_READID; + + /* read sector protection at sector address, (A7 .. A0) = 0x02. + * D0 = 1 for each device if protected. + * If at least one device is protected the sector is marked + * protected, but return failure. Mixed protected and + * unprotected devices within a sector should never happen. + */ + value = addr[2] & (FPW) INTEL_PROTECT; + if (value == 0) + info->protect[sector] = 0; + else if (value == (FPW) INTEL_PROTECT) + info->protect[sector] = 1; + else { + /* error, mixed protected and unprotected */ + rcode = 1; + info->protect[sector] = 1; + } + if (info->protect[sector] != prot) + rcode = 1; /* failed to protect/unprotect as requested */ + + /* reload all protection bits from hardware for now */ + flash_sync_real_protect(info); + break; + + default: + /* no hardware protect that we support */ + info->protect[sector] = prot; + break; + } + + return rcode; +} +#endif /* CFG_FLASH_PROTECTION */ +#endif /* CFG_FLASH_CFI */ diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c new file mode 100644 index 0000000..4ccea30 --- /dev/null +++ b/board/freescale/m5329evb/m5329evb.c @@ -0,0 +1,376 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale FireEngine 5329 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + u32 dramsize, i; + + dramsize = CFG_SDRAM_SIZE * 0x100000; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + sdram->cs0 = (CFG_SDRAM_BASE | i); + sdram->cfg1 = CFG_SDRAM_CFG1; + sdram->cfg2 = CFG_SDRAM_CFG2; + + /* Issue PALL */ + sdram->ctrl = CFG_SDRAM_CTRL | 2; + + /* Issue LEMR */ + sdram->mode = CFG_SDRAM_EMOD; + sdram->mode = (CFG_SDRAM_MODE | 0x04000000); + + udelay(500); + + /* Issue PALL */ + sdram->ctrl = (CFG_SDRAM_CTRL | 2); + + /* Perform two refresh cycles */ + sdram->ctrl = CFG_SDRAM_CTRL | 4; + sdram->ctrl = CFG_SDRAM_CTRL | 4; + + sdram->mode = CFG_SDRAM_MODE; + + sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + + udelay(100); + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#ifdef CFG_FLASH_CFI +void sync(void) +{ + /* This sync function is PowerPC intruction, + coldfire does not have this instruction. Dummy function */ +} +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; + gpio->par_feci2c |= + GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; + } else { + gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \ + (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \ + (REG & 0x1f) << 18) | \ + (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + strcpy(info->phy_name, + STR_ID_DP83848VV); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + printf(STR_ID_DP83848VV); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +void mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, + unsigned char reg, unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, + unsigned char reg, unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds new file mode 100644 index 0000000..9b994a0 --- /dev/null +++ b/board/freescale/m5329evb/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf532x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index d97c09e..9651b30 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -207,6 +207,59 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } +#elif defined(CONFIG_M68K) /* M68K */ + +int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + bd_t *bd = gd->bd; + print_num ("memstart", (ulong)bd->bi_memstart); + print_num ("memsize", (ulong)bd->bi_memsize); + print_num ("flashstart", (ulong)bd->bi_flashstart); + print_num ("flashsize", (ulong)bd->bi_flashsize); + print_num ("flashoffset", (ulong)bd->bi_flashoffset); +#if defined(CFG_INIT_RAM_ADDR) + print_num ("sramstart", (ulong)bd->bi_sramstart); + print_num ("sramsize", (ulong)bd->bi_sramsize); +#endif +#if defined(CFG_MBAR) + print_num ("mbar", bd->bi_mbar_base ); +#endif +#if defined(CFG_CMD_NET) + puts ("ethaddr ="); + for (i=0; i<6; ++i) { + printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); + } + +#if defined(CONFIG_HAS_ETH1) + puts ("\neth1addr ="); + for (i=0; i<6; ++i) { + printf ("%c%02X", i ? ':' : ' ', bd->bi_enet1addr[i]); + } +#endif + +#if defined(CONFIG_HAS_ETH2) + puts ("\neth2addr ="); + for (i=0; i<6; ++i) { + printf ("%c%02X", i ? ':' : ' ', bd->bi_enet2addr[i]); + } +#endif + +#if defined(CONFIG_HAS_ETH3) + puts ("\neth3addr ="); + for (i=0; i<6; ++i) { + printf ("%c%02X", i ? ':' : ' ', bd->bi_enet3addr[i]); + } +#endif + + puts ("\nip_addr = "); + print_IPaddr (bd->bi_ip_addr); +#endif /* CFG_CMD_NET */ + printf ("\nbaudrate = %d bps\n", bd->bi_baudrate); + + return 0; +} + #else /* ! PPC, which leaves MIPS */ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) diff --git a/common/cmd_mii.c b/common/cmd_mii.c index e659536..c3f43d7 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -438,7 +438,7 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) int rcode = 0; char *devname; -#ifdef CONFIG_8xx +#if defined(CONFIG_8xx) || defined(CONFIG_MCF532x) mii_init (); #endif diff --git a/cpu/mcf532x/Makefile b/cpu/mcf532x/Makefile new file mode 100644 index 0000000..452848d --- /dev/null +++ b/cpu/mcf532x/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +# CFLAGS += -DET_DEBUG + +LIB = lib$(CPU).a + +START = +COBJS = cpu.o speed.o cpu_init.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/mcf532x/config.mk b/cpu/mcf532x/config.mk new file mode 100644 index 0000000..ba324a8 --- /dev/null +++ b/cpu/mcf532x/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2003 Josef Baumgartner +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -ffixed-d7 -msep-data +PLATFORM_CPPFLAGS += -m5307 -fPIC diff --git a/cpu/mcf532x/cpu.c b/cpu/mcf532x/cpu.c new file mode 100644 index 0000000..071c503 --- /dev/null +++ b/cpu/mcf532x/cpu.c @@ -0,0 +1,134 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + wdp->cr = 0; + udelay(1000); + + /* enable watchdog, set timeout to 0 and wait */ + wdp->cr = WTM_WCR_EN; + while (1) ; + + /* we don't return! */ + return 0; +}; + +int checkcpu(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; + u16 msk; + u16 id = 0; + u8 ver; + + puts("CPU: "); + msk = (ccm->cir >> 6); + ver = (ccm->cir & 0x003f); + switch (msk) { + case 0x54: + id = 5329; + break; + case 0x59: + id = 5328; + break; + case 0x61: + id = 5327; + break; + } + + if (id) { + printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, + ver); + printf(" CPU CLK %d Mhz BUS CLK %d Mhz\n", + (int)(gd->cpu_clk / 1000000), + (int)(gd->bus_clk / 1000000)); + } + + return 0; +}; + +#if defined(CONFIG_WATCHDOG) +/* Called by macro WATCHDOG_RESET */ +void watchdog_reset(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + wdp->sr = 0x5555; /* Count register */ +} + +int watchdog_disable(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + /* UserManual, once the wdog is disabled, wdog cannot be re-enabled */ + wdp->cr |= WTM_WCR_HALTED; /* halted watchdog timer */ + + puts("WATCHDOG:disabled\n"); + return (0); +} + +int watchdog_init(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + u32 wdog_module = 0; + + /* set timeout and enable watchdog */ + wdog_module = ((CFG_CLK / 1000) * CONFIG_WATCHDOG_TIMEOUT); + wdog_module |= (wdog_module / 8192); + wdp->mr = wdog_module; + + wdp->cr = WTM_WCR_EN; + puts("WATCHDOG:enabled\n"); + + return (0); +} +#endif /* #ifdef CONFIG_WATCHDOG */ + +#ifdef CONFIG_MCFINTC +int interrupt_init(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + /* Make sure all interrupts are disabled */ + intp->imrh0 |= 0xFFFFFFFF; + intp->imrl0 |= 0xFFFFFFFF; + + enable_interrupts(); + return 0; +} +#endif /* CONFIG_MCFINTC */ diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c new file mode 100644 index 0000000..6319658 --- /dev/null +++ b/cpu/mcf532x/cpu_init.c @@ -0,0 +1,126 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + volatile scm2_t *scm2 = (scm2_t *) MMAP_SCM2; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + volatile wdog_t *wdog = (wdog_t *) MMAP_WDOG; + + /* watchdog is enabled by default - disable the watchdog */ +#ifndef CONFIG_WATCHDOG + wdog->cr = 0; +#endif + + scm1->mpr0 = 0x77777777; + scm2->pacra = 0; + scm2->pacrb = 0; + scm2->pacrc = 0; + scm2->pacrd = 0; + scm2->pacre = 0; + scm2->pacrf = 0; + scm2->pacrg = 0; + scm1->pacrh = 0; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3)); + break; + case 2: + gpio->par_uart = (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2); + break; + } + + /* Port configuration */ + gpio->par_cs = 0x3E; + +#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL)) + fbcs->csar0 = CFG_CS0_BASE; + fbcs->cscr0 = CFG_CS0_CTRL; + fbcs->csmr0 = CFG_CS0_MASK; +#endif + +#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) + /* Latch chipselect */ + fbcs->csar1 = CFG_CS1_BASE; + fbcs->cscr1 = CFG_CS1_CTRL; + fbcs->csmr1 = CFG_CS1_MASK; +#endif + +#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) + fbcs->csar2 = CFG_CS2_BASE; + fbcs->cscr2 = CFG_CS2_CTRL; + fbcs->csmr2 = CFG_CS2_MASK; +#endif + +#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) + fbcs->csar3 = CFG_CS3_BASE; + fbcs->cscr3 = CFG_CS3_CTRL; + fbcs->csmr3 = CFG_CS3_MASK; +#endif + +#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) + fbcs->csar4 = CFG_CS4_BASE; + fbcs->cscr4 = CFG_CS4_CTRL; + fbcs->csmr4 = CFG_CS4_MASK; +#endif + +#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) + fbcs->csar5 = CFG_CS5_BASE; + fbcs->cscr5 = CFG_CS5_CTRL; + fbcs->csmr5 = CFG_CS5_MASK; +#endif +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ + /*icache_enable(); */ + return (0); +} diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c new file mode 100644 index 0000000..c4ba7ec --- /dev/null +++ b/cpu/mcf532x/speed.c @@ -0,0 +1,222 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +/* PLL min/max specifications */ +#define MAX_FVCO 500000 /* KHz */ +#define MAX_FSYS 80000 /* KHz */ +#define MIN_FSYS 58333 /* KHz */ +#define FREF 16000 /* KHz */ +#define MAX_MFD 135 /* Multiplier */ +#define MIN_MFD 88 /* Multiplier */ +#define BUSDIV 6 /* Divider */ +/* + * Low Power Divider specifications + */ +#define MIN_LPD (1 << 0) /* Divider (not encoded) */ +#define MAX_LPD (1 << 15) /* Divider (not encoded) */ +#define DEFAULT_LPD (1 << 1) /* Divider (not encoded) */ + +/* + * Get the value of the current system clock + * + * Parameters: + * none + * + * Return Value: + * The current output system frequency + */ +int get_sys_clock(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM); + volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL); + int divider; + + /* Test to see if device is in LIMP mode */ + if (ccm->misccr & CCM_MISCCR_LIMP) { + divider = ccm->cdr & CCM_CDR_LPDIV(0xF); + return (FREF / (2 << divider)); + } else { + return ((FREF * pll->pfdr) / (BUSDIV * 4)); + } +} + +/* + * Initialize the Low Power Divider circuit + * + * Parameters: + * div Desired system frequency divider + * + * Return Value: + * The resulting output system frequency + */ +int clock_limp(int div) +{ + volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM); + u32 temp; + + /* Check bounds of divider */ + if (div < MIN_LPD) + div = MIN_LPD; + if (div > MAX_LPD) + div = MAX_LPD; + + /* Save of the current value of the SSIDIV so we don't overwrite the value */ + temp = (ccm->cdr & CCM_CDR_SSIDIV(0xF)); + + /* Apply the divider to the system clock */ + ccm->cdr = (CCM_CDR_LPDIV(div) | CCM_CDR_SSIDIV(temp)); + + ccm->misccr |= CCM_MISCCR_LIMP; + + return (FREF / (3 * (1 << div))); +} + +/* + * Exit low power LIMP mode + * + * Parameters: + * div Desired system frequency divider + * + * Return Value: + * The resulting output system frequency + */ +int clock_exit_limp(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM); + int fout; + + /* Exit LIMP mode */ + ccm->misccr &= (~CCM_MISCCR_LIMP); + + /* Wait for PLL to lock */ + while (!(ccm->misccr & CCM_MISCCR_PLL_LOCK)) ; + + fout = get_sys_clock(); + + return fout; +} + +/* Initialize the PLL + * + * Parameters: + * fref PLL reference clock frequency in KHz + * fsys Desired PLL output frequency in KHz + * flags Operating parameters + * + * Return Value: + * The resulting output system frequency + */ +int clock_pll(int fsys, int flags) +{ + volatile u32 *sdram_workaround = (volatile u32 *)(MMAP_SDRAM + 0x80); + volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL); + int fref, temp, fout, mfd; + u32 i; + + fref = FREF; + + if (fsys == 0) { + /* Return current PLL output */ + mfd = pll->pfdr; + + return (fref * mfd / (BUSDIV * 4)); + } + + /* Check bounds of requested system clock */ + if (fsys > MAX_FSYS) + fsys = MAX_FSYS; + + if (fsys < MIN_FSYS) + fsys = MIN_FSYS; + + /* Multiplying by 100 when calculating the temp value, + and then dividing by 100 to calculate the mfd allows + for exact values without needing to include floating + point libraries. */ + temp = (100 * fsys) / fref; + mfd = (4 * BUSDIV * temp) / 100; + + /* Determine the output frequency for selected values */ + fout = ((fref * mfd) / (BUSDIV * 4)); + + /* + * Check to see if the SDRAM has already been initialized. + * If it has then the SDRAM needs to be put into self refresh + * mode before reprogramming the PLL. + */ + /* Put SDRAM into self refresh mode */ +/* if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF) + MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_CKE;*/ + + /* + * Initialize the PLL to generate the new system clock frequency. + * The device must be put into LIMP mode to reprogram the PLL. + */ + + /* Enter LIMP mode */ + clock_limp(DEFAULT_LPD); + + /* Reprogram PLL for desired fsys */ + pll->podr = (PLL_PODR_CPUDIV(BUSDIV / 3) | PLL_PODR_BUSDIV(BUSDIV)); + + pll->pfdr = mfd; + + /* Exit LIMP mode */ + clock_exit_limp(); + + /* + * Return the SDRAM to normal operation if it is in use. + */ + /* Exit self refresh mode */ +/* if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF) + MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_CKE;*/ + + /* software workaround for SDRAM opeartion after exiting LIMP mode errata */ + *sdram_workaround = CFG_SDRAM_BASE; + /* wait for DQS logic to relock */ + for (i = 0; i < 0x200; i++) ; + + return fout; +} + +/* + * get_clocks() fills in gd->cpu_clock and gd->bus_clk + */ +int get_clocks(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bus_clk = clock_pll(CFG_CLK / 1000, 0) * 1000; + gd->cpu_clk = (gd->bus_clk * 3); + return (0); +} diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S new file mode 100644 index 0000000..d36d076 --- /dev/null +++ b/cpu/mcf532x/start.S @@ -0,0 +1,338 @@ +/* + * Copyright (C) 2003 Josef Baumgartner + * Based on code from Bernhard Kuhn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include "version.h" + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + +#define _START _start +#define _FAULT _fault + + +#define SAVE_ALL \ + move.w #0x2700,%sr; /* disable intrs */ \ + subl #60,%sp; /* space for 15 regs */ \ + moveml %d0-%d7/%a0-%a6,%sp@; + +#define RESTORE_ALL \ + moveml %sp@,%d0-%d7/%a0-%a6; \ + addl #60,%sp; /* space for 15 regs */ \ + rte; + + +.text +/* + * Vector table. This is used for initial platform startup. + * These vectors are to catch any un-intended traps. + */ +_vectors: + +INITSP: .long 0x00000000 /* Initial SP */ +INITPC: .long _START /* Initial PC */ +vector02: .long _FAULT /* Access Error */ +vector03: .long _FAULT /* Address Error */ +vector04: .long _FAULT /* Illegal Instruction */ +vector05: .long _FAULT /* Reserved */ +vector06: .long _FAULT /* Reserved */ +vector07: .long _FAULT /* Reserved */ +vector08: .long _FAULT /* Privilege Violation */ +vector09: .long _FAULT /* Trace */ +vector0A: .long _FAULT /* Unimplemented A-Line */ +vector0B: .long _FAULT /* Unimplemented F-Line */ +vector0C: .long _FAULT /* Debug Interrupt */ +vector0D: .long _FAULT /* Reserved */ +vector0E: .long _FAULT /* Format Error */ +vector0F: .long _FAULT /* Unitialized Int. */ + +/* Reserved */ +vector10_17: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector18: .long _FAULT /* Spurious Interrupt */ +vector19: .long _FAULT /* Autovector Level 1 */ +vector1A: .long _FAULT /* Autovector Level 2 */ +vector1B: .long _FAULT /* Autovector Level 3 */ +vector1C: .long _FAULT /* Autovector Level 4 */ +vector1D: .long _FAULT /* Autovector Level 5 */ +vector1E: .long _FAULT /* Autovector Level 6 */ +vector1F: .long _FAULT /* Autovector Level 7 */ + +/* TRAP #0 - #15 */ +vector20_2F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +/* Reserved */ +vector30_3F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector64_127: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector128_191: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector192_255: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + + .text + + .globl _start +_start: + nop + nop + move.w #0x2700,%sr /* Mask off Interrupt */ + + /* Set vector base register at the beginning of the Flash */ + move.l #CFG_FLASH_BASE, %d0 + movec %d0, %VBR + + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR0 + + /* invalidate and disable cache */ + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a2 + move.l %d0, (%a1) + move.l %d0, (%a2) + + /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp + clr.l %sp@- + + move.l #__got_start, %a5 /* put relocation table address to a5 */ + + bsr cpu_init_f /* run low-level CPU init code (from flash) */ + bsr board_init_f /* run low-level board init code (from flash) */ + + /* board_init_f() does not return */ + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + link.w %a6,#0 + move.l 8(%a6), %sp /* set new stack pointer */ + + move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ + move.l 16(%a6), %a0 /* Save copy of Destination Address */ + + move.l #CFG_MONITOR_BASE, %a1 + move.l #__init_end, %a2 + move.l %a0, %a3 + + /* copy the code to RAM */ +1: + move.l (%a1)+, (%a3)+ + cmp.l %a1,%a2 + bgt.s 1b + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + move.l %a0, %a1 + add.l #(in_ram - CFG_MONITOR_BASE), %a1 + jmp (%a1) + +in_ram: + +clear_bss: + /* + * Now clear BSS segment + */ + move.l %a0, %a1 + add.l #(_sbss - CFG_MONITOR_BASE),%a1 + move.l %a0, %d1 + add.l #(_ebss - CFG_MONITOR_BASE),%d1 +6: + clr.l (%a1)+ + cmp.l %a1,%d1 + bgt.s 6b + + /* + * fix got table in RAM + */ + move.l %a0, %a1 + add.l #(__got_start - CFG_MONITOR_BASE),%a1 + move.l %a1,%a5 /* * fix got pointer register a5 */ + + move.l %a0, %a2 + add.l #(__got_end - CFG_MONITOR_BASE),%a2 + +7: + move.l (%a1),%d1 + sub.l #_start,%d1 + add.l %a0,%d1 + move.l %d1,(%a1)+ + cmp.l %a2, %a1 + bne 7b + + /* calculate relative jump to board_init_r in ram */ + move.l %a0, %a1 + add.l #(board_init_r - CFG_MONITOR_BASE), %a1 + + /* set parameters for board_init_r */ + move.l %a0,-(%sp) /* dest_addr */ + move.l %d0,-(%sp) /* gd */ + jsr (%a1) + +/*------------------------------------------------------------------------------*/ +/* exception code */ + .globl _fault +_fault: + jmp _fault + .globl _exc_handler + +_exc_handler: + SAVE_ALL + movel %sp,%sp@- + bsr exc_handler + addql #4,%sp + RESTORE_ALL + + .globl _int_handler +_int_handler: + SAVE_ALL + movel %sp,%sp@- + bsr int_handler + addql #4,%sp + RESTORE_ALL + +/*------------------------------------------------------------------------------*/ +/* cache functions */ + .globl icache_enable +icache_enable: + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + move.l #(CFG_CS0_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR1 /* Enable cache */ + + /*move.l #0x81000100, %d0*/ /* Setup cache mask */ + move.l #0x81000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + .globl icache_disable +icache_disable: + move.l #0x00000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + clr.l %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + movec %d0, %ACR1 /* Enable cache */ + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl icache_status +icache_status: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l (%a1), %d0 + rts + + .globl icache_invalid +icache_invalid: + move.l #0x00000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + rts + + .globl dcache_enable +dcache_enable: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + /* No dcache, just a dummy function */ + .globl dcache_disable +dcache_disable: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl dcache_status +dcache_status: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + move.l (%a1), %d0 + rts + +/*------------------------------------------------------------------------------*/ + + .globl version_string +version_string: + .ascii U_BOOT_VERSION + .ascii " (", __DATE__, " - ", __TIME__, ")" + .ascii CONFIG_IDENT_STRING, "\0" diff --git a/drivers/net/Makefile b/drivers/net/Makefile new file mode 100644 index 0000000..37d69b9 --- /dev/null +++ b/drivers/net/Makefile @@ -0,0 +1,45 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libnet.a + +COBJS := mcffec.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c new file mode 100644 index 0000000..d1c84ca --- /dev/null +++ b/drivers/net/mcffec.c @@ -0,0 +1,594 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#ifdef CONFIG_MCFFEC +#undef ET_DEBUG +#undef MII_DEBUG + +/* Ethernet Transmit and Receive Buffers */ +#define DBUF_LENGTH 1520 + +#define TX_BUF_CNT 2 + +/* + NOTE: PKT_MAXBUF_SIZE must be larger or equal to PKT_MAXBLR_SIZE, + see M54455 User Manual for MAX_FL of Receive Control Register for more + description. If PKT_MAXBUF_SIZE set to 1518, the FEC bandwidth will + reduce to about 20~40% of normal bandwidth. Changing PKT_MAXBLR_SIZE + will not make any improvement on speed +*/ +#define PKT_MAXBUF_SIZE 1518 +#define PKT_MINBUF_SIZE 64 +#define PKT_MAXBLR_SIZE 1520 +#define LAST_PKTBUFSRX PKTBUFSRX - 1 +#define BD_ENET_RX_W_E (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY) +#define BD_ENET_TX_RDY_LST (BD_ENET_TX_READY | BD_ENET_TX_LAST) + +DECLARE_GLOBAL_DATA_PTR; + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) + +struct fec_info_s fec_info[] = { +#ifdef CFG_FEC0_IOBASE + { + 0, /* index */ + CFG_FEC0_IOBASE, /* io base */ + CFG_FEC0_PINMUX, /* gpio pin muxing */ + CFG_FEC0_MIIBASE, /* mii base */ + -1, /* phy_addr */ + 0, /* duplex and speed */ + 0, /* phy name */ + 0, /* phyname init */ + 0, /* RX BD */ + 0, /* TX BD */ + 0, /* rx Index */ + 0, /* tx Index */ + 0, /* tx buffer */ + 0, /* initialized flag */ + }, +#endif +#ifdef CFG_FEC1_IOBASE + { + 1, /* index */ + CFG_FEC1_IOBASE, /* io base */ + CFG_FEC1_PINMUX, /* gpio pin muxing */ + CFG_FEC1_MIIBASE, /* mii base */ + -1, /* phy_addr */ + 0, /* duplex and speed */ + 0, /* phy name */ + 0, /* phy name init */ + 0, /* RX BD */ + 0, /* TX BD */ + 0, /* rx Index */ + 0, /* tx Index */ + 0, /* tx buffer */ + 0, /* initialized flag */ + } +#endif +}; + +/* + * FEC Ethernet Tx and Rx buffer descriptors allocated at the + * immr->udata_bd address on Dual-Port RAM + * Provide for Double Buffering + */ + +int fec_send(struct eth_device *dev, volatile void *packet, int length); +int fec_recv(struct eth_device *dev); +int fec_init(struct eth_device *dev, bd_t * bd); +void fec_halt(struct eth_device *dev); +void fec_reset(struct eth_device *dev); + +extern int fecpin_setclear(struct eth_device *dev, int setclear); + +#ifdef CFG_DISCOVER_PHY +extern void mii_init(void); +extern uint mii_send(uint mii_cmd); +extern int mii_discover_phy(struct eth_device *dev); +extern int mcffec_miiphy_read(char *devname, unsigned char addr, + unsigned char reg, unsigned short *value); +extern int mcffec_miiphy_write(char *devname, unsigned char addr, + unsigned char reg, unsigned short value); +#endif + +void setFecDuplexSpeed(volatile fec_t * fecp, bd_t * bd, int dup_spd) +{ + if ((dup_spd >> 16) == FULL) { + /* Set maximum frame length */ + fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE | + FEC_RCR_PROM | 0x100; + fecp->tcr = FEC_TCR_FDEN; + } else { + /* Half duplex mode */ + fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | + FEC_RCR_MII_MODE | FEC_RCR_DRT; + fecp->tcr &= ~FEC_TCR_FDEN; + } + + if ((dup_spd & 0xFFFF) == _100BASET) { +#ifdef MII_DEBUG + printf("100Mbps\n"); +#endif + bd->bi_ethspeed = 100; + } else { +#ifdef MII_DEBUG + printf("10Mbps\n"); +#endif + bd->bi_ethspeed = 10; + } +} + +int fec_send(struct eth_device *dev, volatile void *packet, int length) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int j, rc; + u16 phyStatus; + + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus); + + /* section 16.9.23.3 + * Wait for ready + */ + j = 0; + while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && + (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("TX not ready\n"); + } + + info->txbd[info->txIdx].cbd_bufaddr = (uint) packet; + info->txbd[info->txIdx].cbd_datlen = length; + info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST; + + /* Activate transmit Buffer Descriptor polling */ + fecp->tdar = 0x01000000; /* Descriptor polling active */ + + j = 0; + while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && + (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("TX timeout\n"); + } +#ifdef ET_DEBUG + printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", + __FILE__, __LINE__, __FUNCTION__, j, + info->txbd[info->txIdx].cbd_sc, + (info->txbd[info->txIdx].cbd_sc & 0x003C) >> 2); +#endif + + /* return only status bits */ ; + rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS); + info->txIdx = (info->txIdx + 1) % TX_BUF_CNT; + + return rc; +} + +int fec_recv(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int length; + + for (;;) { + /* section 16.9.23.2 */ + if (info->rxbd[info->rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { + length = -1; + break; /* nothing received - leave for() loop */ + } + + length = info->rxbd[info->rxIdx].cbd_datlen; + + if (info->rxbd[info->rxIdx].cbd_sc & 0x003f) { + printf("%s[%d] err: %x\n", + __FUNCTION__, __LINE__, + info->rxbd[info->rxIdx].cbd_sc); +#ifdef ET_DEBUG + printf("%s[%d] err: %x\n", + __FUNCTION__, __LINE__, + info->rxbd[info->rxIdx].cbd_sc); +#endif + } else { + + length -= 4; + /* Pass the packet up to the protocol layers. */ + NetReceive(NetRxPackets[info->rxIdx], length); + + fecp->eir |= FEC_EIR_RXF; + } + + /* Give the buffer back to the FEC. */ + info->rxbd[info->rxIdx].cbd_datlen = 0; + + /* wrap around buffer index when necessary */ + if (info->rxIdx == LAST_PKTBUFSRX) { + info->rxbd[PKTBUFSRX - 1].cbd_sc = BD_ENET_RX_W_E; + info->rxIdx = 0; + } else { + info->rxbd[info->rxIdx].cbd_sc = BD_ENET_RX_EMPTY; + info->rxIdx++; + } + + /* Try to fill Buffer Descriptors */ + fecp->rdar = 0x01000000; /* Descriptor polling active */ + } + + return length; +} + +/************************************************************** + * + * FEC Ethernet Initialization Routine + * + *************************************************************/ + +#ifdef ET_DEBUG +void dbgFecRegs(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + + printf("=====\n"); + printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir); + printf("imask %x - %x\n", (int)&fecp->eimr, fecp->eimr); + printf("r_des_active %x - %x\n", (int)&fecp->rdar, fecp->rdar); + printf("x_des_active %x - %x\n", (int)&fecp->tdar, fecp->tdar); + printf("ecntrl %x - %x\n", (int)&fecp->ecr, fecp->ecr); + printf("mii_mframe %x - %x\n", (int)&fecp->mmfr, fecp->mmfr); + printf("mii_speed %x - %x\n", (int)&fecp->mscr, fecp->mscr); + printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc); + printf("r_cntrl %x - %x\n", (int)&fecp->rcr, fecp->rcr); + printf("x_cntrl %x - %x\n", (int)&fecp->tcr, fecp->tcr); + printf("padr_l %x - %x\n", (int)&fecp->palr, fecp->palr); + printf("padr_u %x - %x\n", (int)&fecp->paur, fecp->paur); + printf("op_pause %x - %x\n", (int)&fecp->opd, fecp->opd); + printf("iadr_u %x - %x\n", (int)&fecp->iaur, fecp->iaur); + printf("iadr_l %x - %x\n", (int)&fecp->ialr, fecp->ialr); + printf("gadr_u %x - %x\n", (int)&fecp->gaur, fecp->gaur); + printf("gadr_l %x - %x\n", (int)&fecp->galr, fecp->galr); + printf("x_wmrk %x - %x\n", (int)&fecp->tfwr, fecp->tfwr); + printf("r_bound %x - %x\n", (int)&fecp->frbr, fecp->frbr); + printf("r_fstart %x - %x\n", (int)&fecp->frsr, fecp->frsr); + printf("r_drng %x - %x\n", (int)&fecp->erdsr, fecp->erdsr); + printf("x_drng %x - %x\n", (int)&fecp->etdsr, fecp->etdsr); + printf("r_bufsz %x - %x\n", (int)&fecp->emrbr, fecp->emrbr); + + printf("\n"); + printf("rmon_t_drop %x - %x\n", (int)&fecp->rmon_t_drop, + fecp->rmon_t_drop); + printf("rmon_t_packets %x - %x\n", (int)&fecp->rmon_t_packets, + fecp->rmon_t_packets); + printf("rmon_t_bc_pkt %x - %x\n", (int)&fecp->rmon_t_bc_pkt, + fecp->rmon_t_bc_pkt); + printf("rmon_t_mc_pkt %x - %x\n", (int)&fecp->rmon_t_mc_pkt, + fecp->rmon_t_mc_pkt); + printf("rmon_t_crc_align %x - %x\n", (int)&fecp->rmon_t_crc_align, + fecp->rmon_t_crc_align); + printf("rmon_t_undersize %x - %x\n", (int)&fecp->rmon_t_undersize, + fecp->rmon_t_undersize); + printf("rmon_t_oversize %x - %x\n", (int)&fecp->rmon_t_oversize, + fecp->rmon_t_oversize); + printf("rmon_t_frag %x - %x\n", (int)&fecp->rmon_t_frag, + fecp->rmon_t_frag); + printf("rmon_t_jab %x - %x\n", (int)&fecp->rmon_t_jab, + fecp->rmon_t_jab); + printf("rmon_t_col %x - %x\n", (int)&fecp->rmon_t_col, + fecp->rmon_t_col); + printf("rmon_t_p64 %x - %x\n", (int)&fecp->rmon_t_p64, + fecp->rmon_t_p64); + printf("rmon_t_p65to127 %x - %x\n", (int)&fecp->rmon_t_p65to127, + fecp->rmon_t_p65to127); + printf("rmon_t_p128to255 %x - %x\n", (int)&fecp->rmon_t_p128to255, + fecp->rmon_t_p128to255); + printf("rmon_t_p256to511 %x - %x\n", (int)&fecp->rmon_t_p256to511, + fecp->rmon_t_p256to511); + printf("rmon_t_p512to1023 %x - %x\n", (int)&fecp->rmon_t_p512to1023, + fecp->rmon_t_p512to1023); + printf("rmon_t_p1024to2047 %x - %x\n", (int)&fecp->rmon_t_p1024to2047, + fecp->rmon_t_p1024to2047); + printf("rmon_t_p_gte2048 %x - %x\n", (int)&fecp->rmon_t_p_gte2048, + fecp->rmon_t_p_gte2048); + printf("rmon_t_octets %x - %x\n", (int)&fecp->rmon_t_octets, + fecp->rmon_t_octets); + + printf("\n"); + printf("ieee_t_drop %x - %x\n", (int)&fecp->ieee_t_drop, + fecp->ieee_t_drop); + printf("ieee_t_frame_ok %x - %x\n", (int)&fecp->ieee_t_frame_ok, + fecp->ieee_t_frame_ok); + printf("ieee_t_1col %x - %x\n", (int)&fecp->ieee_t_1col, + fecp->ieee_t_1col); + printf("ieee_t_mcol %x - %x\n", (int)&fecp->ieee_t_mcol, + fecp->ieee_t_mcol); + printf("ieee_t_def %x - %x\n", (int)&fecp->ieee_t_def, + fecp->ieee_t_def); + printf("ieee_t_lcol %x - %x\n", (int)&fecp->ieee_t_lcol, + fecp->ieee_t_lcol); + printf("ieee_t_excol %x - %x\n", (int)&fecp->ieee_t_excol, + fecp->ieee_t_excol); + printf("ieee_t_macerr %x - %x\n", (int)&fecp->ieee_t_macerr, + fecp->ieee_t_macerr); + printf("ieee_t_cserr %x - %x\n", (int)&fecp->ieee_t_cserr, + fecp->ieee_t_cserr); + printf("ieee_t_sqe %x - %x\n", (int)&fecp->ieee_t_sqe, + fecp->ieee_t_sqe); + printf("ieee_t_fdxfc %x - %x\n", (int)&fecp->ieee_t_fdxfc, + fecp->ieee_t_fdxfc); + printf("ieee_t_octets_ok %x - %x\n", (int)&fecp->ieee_t_octets_ok, + fecp->ieee_t_octets_ok); + + printf("\n"); + printf("rmon_r_drop %x - %x\n", (int)&fecp->rmon_r_drop, + fecp->rmon_r_drop); + printf("rmon_r_packets %x - %x\n", (int)&fecp->rmon_r_packets, + fecp->rmon_r_packets); + printf("rmon_r_bc_pkt %x - %x\n", (int)&fecp->rmon_r_bc_pkt, + fecp->rmon_r_bc_pkt); + printf("rmon_r_mc_pkt %x - %x\n", (int)&fecp->rmon_r_mc_pkt, + fecp->rmon_r_mc_pkt); + printf("rmon_r_crc_align %x - %x\n", (int)&fecp->rmon_r_crc_align, + fecp->rmon_r_crc_align); + printf("rmon_r_undersize %x - %x\n", (int)&fecp->rmon_r_undersize, + fecp->rmon_r_undersize); + printf("rmon_r_oversize %x - %x\n", (int)&fecp->rmon_r_oversize, + fecp->rmon_r_oversize); + printf("rmon_r_frag %x - %x\n", (int)&fecp->rmon_r_frag, + fecp->rmon_r_frag); + printf("rmon_r_jab %x - %x\n", (int)&fecp->rmon_r_jab, + fecp->rmon_r_jab); + printf("rmon_r_p64 %x - %x\n", (int)&fecp->rmon_r_p64, + fecp->rmon_r_p64); + printf("rmon_r_p65to127 %x - %x\n", (int)&fecp->rmon_r_p65to127, + fecp->rmon_r_p65to127); + printf("rmon_r_p128to255 %x - %x\n", (int)&fecp->rmon_r_p128to255, + fecp->rmon_r_p128to255); + printf("rmon_r_p256to511 %x - %x\n", (int)&fecp->rmon_r_p256to511, + fecp->rmon_r_p256to511); + printf("rmon_r_p512to1023 %x - %x\n", (int)&fecp->rmon_r_p512to1023, + fecp->rmon_r_p512to1023); + printf("rmon_r_p1024to2047 %x - %x\n", (int)&fecp->rmon_r_p1024to2047, + fecp->rmon_r_p1024to2047); + printf("rmon_r_p_gte2048 %x - %x\n", (int)&fecp->rmon_r_p_gte2048, + fecp->rmon_r_p_gte2048); + printf("rmon_r_octets %x - %x\n", (int)&fecp->rmon_r_octets, + fecp->rmon_r_octets); + + printf("\n"); + printf("ieee_r_drop %x - %x\n", (int)&fecp->ieee_r_drop, + fecp->ieee_r_drop); + printf("ieee_r_frame_ok %x - %x\n", (int)&fecp->ieee_r_frame_ok, + fecp->ieee_r_frame_ok); + printf("ieee_r_crc %x - %x\n", (int)&fecp->ieee_r_crc, + fecp->ieee_r_crc); + printf("ieee_r_align %x - %x\n", (int)&fecp->ieee_r_align, + fecp->ieee_r_align); + printf("ieee_r_macerr %x - %x\n", (int)&fecp->ieee_r_macerr, + fecp->ieee_r_macerr); + printf("ieee_r_fdxfc %x - %x\n", (int)&fecp->ieee_r_fdxfc, + fecp->ieee_r_fdxfc); + printf("ieee_r_octets_ok %x - %x\n", (int)&fecp->ieee_r_octets_ok, + fecp->ieee_r_octets_ok); + + printf("\n\n\n"); +} +#endif + +int fec_init(struct eth_device *dev, bd_t * bd) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int i; + u8 *ea; + + fecpin_setclear(dev, 1); + + fec_reset(dev); + +#if (CONFIG_COMMANDS & CFG_CMD_MII) || defined (CONFIG_MII) || \ + defined (CFG_DISCOVER_PHY) + + mii_init(); + + setFecDuplexSpeed(fecp, bd, info->dup_spd); +#else +#ifndef CFG_DISCOVER_PHY + setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED); +#endif /* ifndef CFG_DISCOVER_PHY */ +#endif /* CFG_CMD_MII || CONFIG_MII */ + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set station address */ + if ((u32) fecp == CFG_FEC0_IOBASE) { + ea = &bd->bi_enetaddr[0]; + } else { +#ifdef CFG_FEC1_IOBASE + ea = &bd->bi_enet1addr[0]; +#endif + } + + fecp->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); +#ifdef ET_DEBUG + printf("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n", + ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]); +#endif + + /* Clear unicast address hash table */ + fecp->iaur = 0; + fecp->ialr = 0; + + /* Clear multicast address hash table */ + fecp->gaur = 0; + fecp->galr = 0; + + /* Set maximum receive buffer size. */ + fecp->emrbr = PKT_MAXBLR_SIZE; + + /* + * Setup Buffers and Buffer Desriptors + */ + info->rxIdx = 0; + info->txIdx = 0; + + /* + * Setup Receiver Buffer Descriptors (13.14.24.18) + * Settings: + * Empty, Wrap + */ + for (i = 0; i < PKTBUFSRX; i++) { + info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; + info->rxbd[i].cbd_datlen = 0; /* Reset */ + info->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i]; + } + info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; + + /* + * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) + * Settings: + * Last, Tx CRC + */ + for (i = 0; i < TX_BUF_CNT; i++) { + info->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC; + info->txbd[i].cbd_datlen = 0; /* Reset */ + info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]); + } + info->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; + + /* Set receive and transmit descriptor base */ + fecp->erdsr = (unsigned int)(&info->rxbd[0]); + fecp->etdsr = (unsigned int)(&info->txbd[0]); + + /* Now enable the transmit and receive processing */ + fecp->ecr |= FEC_ECR_ETHER_EN; + + /* And last, try to fill Rx Buffer Descriptors */ + fecp->rdar = 0x01000000; /* Descriptor polling active */ + + return 1; +} + +void fec_reset(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +void fec_halt(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + + fec_reset(dev); + + fecpin_setclear(dev, 0); + + info->rxIdx = info->txIdx = 0; + memset(info->rxbd, 0, PKTBUFSRX * sizeof(cbd_t)); + memset(info->txbd, 0, TX_BUF_CNT * sizeof(cbd_t)); + memset(info->txbuf, 0, DBUF_LENGTH); +} + +int mcffec_initialize(bd_t * bis) +{ + struct eth_device *dev; + int i; + + for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) { + + dev = (struct eth_device *)malloc(sizeof *dev); + if (dev == NULL) + hang(); + + memset(dev, 0, sizeof(*dev)); + + sprintf(dev->name, "FEC%d", fec_info[i].index); + + dev->priv = &fec_info[i]; + dev->init = fec_init; + dev->halt = fec_halt; + dev->send = fec_send; + dev->recv = fec_recv; + + /* setup Receive and Transmit buffer descriptor */ + fec_info[i].rxbd = + (cbd_t *) memalign(32, (PKTBUFSRX * sizeof(cbd_t) + 31)); + fec_info[i].txbd = + (cbd_t *) memalign(32, (TX_BUF_CNT * sizeof(cbd_t) + 31)); + fec_info[i].txbuf = (char *)memalign(32, DBUF_LENGTH + 31); +#ifdef ET_DEBUG + printf("rxbd %x txbd %x\n", + (int)fec_info[i].rxbd, (int)fec_info[i].txbd); +#endif + + fec_info[i].phy_name = (char *)malloc(32); + + eth_register(dev); + +#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) + miiphy_register(dev->name, + mcffec_miiphy_read, mcffec_miiphy_write); +#endif + } + + /* default speed */ + bis->bi_ethspeed = 10; + + return 1; +} + +#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ +#endif /* CONFIG_MCFFEC */ diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile new file mode 100644 index 0000000..2208a08 --- /dev/null +++ b/drivers/serial/Makefile @@ -0,0 +1,45 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libserial.a + +COBJS := mcfserial.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c new file mode 100644 index 0000000..a8ca78a --- /dev/null +++ b/drivers/serial/mcfserial.c @@ -0,0 +1,126 @@ +/* + * (C) Copyright 2004, Freescale, Inc + * TsiChung Liew, Tsi-Chung.Liew@freescale.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Minimal serial functions needed to use one of the uart ports + * as serial console interface. + */ + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_MCFSERIAL +int serial_init(void) +{ + volatile uart_t *uart; + u32 counter; + + uart = (volatile uart_t *)(CFG_UART_BASE); + + /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ + uart->ucr = UART_UCR_RESET_RX; + uart->ucr = UART_UCR_RESET_TX; + uart->ucr = UART_UCR_RESET_ERROR; + uart->ucr = UART_UCR_RESET_MR; + __asm__("nop"); + + uart->uimr = 0; + + /* write to CSR: RX/TX baud rate from timers */ + uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK); + + uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE); + uart->umr = UART_UMR_SB_STOP_BITS_1; + + /* Setting up BaudRate */ + counter = (u32) (gd->bus_clk / (gd->baudrate)); + counter >>= 5; + + /* write to CTUR: divide counter upper byte */ + uart->ubg1 = (u8) ((counter & 0xff00) >> 8); + /* write to CTLR: divide counter lower byte */ + uart->ubg2 = (u8) (counter & 0x00ff); + + uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED); + + return (0); +} + +void serial_putc(const char c) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + if (c == '\n') + serial_putc('\r'); + + /* Wait for last character to go. */ + while (!(uart->usr & UART_USR_TXRDY)) ; + + uart->utb = c; +} + +void serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +int serial_getc(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + /* Wait for a character to arrive. */ + while (!(uart->usr & UART_USR_RXRDY)) ; + return uart->urb; +} + +int serial_tstc(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + return (uart->usr & UART_USR_RXRDY); +} + +void serial_setbrg(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + u32 counter; + + counter = ((gd->bus_clk / gd->baudrate)) >> 5; + counter++; + + /* write to CTUR: divide counter upper byte */ + uart->ubg1 = ((counter & 0xff00) >> 8); + /* write to CTLR: divide counter lower byte */ + uart->ubg2 = (counter & 0x00ff); + + uart->ucr = UART_UCR_RESET_RX; + uart->ucr = UART_UCR_RESET_TX; + + uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; +} +#endif /* CONFIG_MCFSERIAL */ diff --git a/include/asm-m68k/byteorder.h b/include/asm-m68k/byteorder.h index ce613ac..0e2a0ed 100644 --- a/include/asm-m68k/byteorder.h +++ b/include/asm-m68k/byteorder.h @@ -1,7 +1,107 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + #ifndef _M68K_BYTEORDER_H #define _M68K_BYTEORDER_H #include + +#ifdef __GNUC__ +#define __sw16(x) \ + ((__u16)( \ + (((__u16)(x) & (__u16)0x00ffU) << 8) | \ + (((__u16)(x) & (__u16)0xff00U) >> 8) )) +#define __sw32(x) \ + ((__u32)( \ + (((__u32)(x)) << 24) | \ + (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \ + (((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \ + (((__u32)(x)) >> 24) )) + +extern __inline__ unsigned ld_le16(const volatile unsigned short *addr) +{ + unsigned result = *addr; + return __sw16(result); +} + +extern __inline__ void st_le16(volatile unsigned short *addr, + const unsigned val) +{ + *addr = __sw16(val); +} + +extern __inline__ unsigned ld_le32(const volatile unsigned *addr) +{ + unsigned result = *addr; + return __sw32(result); +} + +extern __inline__ void st_le32(volatile unsigned *addr, const unsigned val) +{ + *addr = __sw32(val); +} + +#if 0 +/* alas, egcs sounds like it has a bug in this code that doesn't use the + inline asm correctly, and can cause file corruption. Until I hear that + it's fixed, I can live without the extra speed. I hope. */ +#if !(__GNUC__ >= 2 && __GNUC_MINOR__ >= 90) +#if 0 +# define __arch_swab16(x) ld_le16(&x) +# define __arch_swab32(x) ld_le32(&x) +#else +static __inline__ __attribute__ ((const)) +__u16 ___arch__swab16(__u16 value) +{ + return __sw16(value); +} + +static __inline__ __attribute__ ((const)) +__u32 ___arch__swab32(__u32 value) +{ + return __sw32(value); +} + +#define __arch__swab32(x) ___arch__swab32(x) +#define __arch__swab16(x) ___arch__swab16(x) +#endif /* 0 */ + +#endif + +/* The same, but returns converted value from the location pointer by addr. */ +#define __arch__swab16p(addr) ld_le16(addr) +#define __arch__swab32p(addr) ld_le32(addr) + +/* The same, but do the conversion in situ, ie. put the value back to addr. */ +#define __arch__swab16s(addr) st_le16(addr,*addr) +#define __arch__swab32s(addr) st_le32(addr,*addr) +#endif + +#endif /* __GNUC__ */ + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +#define __BYTEORDER_HAS_U64__ +#endif #include -#endif /* _M68K_BYTEORDER_H */ +#endif /* _M68K_BYTEORDER_H */ diff --git a/include/asm-m68k/fec.h b/include/asm-m68k/fec.h index 5bbbfb2..9a5e7d5 100644 --- a/include/asm-m68k/fec.h +++ b/include/asm-m68k/fec.h @@ -5,6 +5,10 @@ * MPC8xx Communication Processor Module. * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) * + * Add FEC Structure and definitions + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -30,9 +34,9 @@ /* Buffer descriptors used FEC. */ typedef struct cpm_buf_desc { - ushort cbd_sc; /* Status and Control */ - ushort cbd_datlen; /* Data length in buffer */ - uint cbd_bufaddr; /* Buffer address in host memory */ + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ } cbd_t; #define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ @@ -53,28 +57,36 @@ typedef struct cpm_buf_desc { /* Buffer descriptor control/status used by Ethernet receive. */ #define BD_ENET_RX_EMPTY ((ushort)0x8000) +#define BD_ENET_RX_RO1 ((ushort)0x4000) #define BD_ENET_RX_WRAP ((ushort)0x2000) #define BD_ENET_RX_INTR ((ushort)0x1000) +#define BD_ENET_RX_RO2 BD_ENET_RX_INTR #define BD_ENET_RX_LAST ((ushort)0x0800) #define BD_ENET_RX_FIRST ((ushort)0x0400) #define BD_ENET_RX_MISS ((ushort)0x0100) +#define BD_ENET_RX_BC ((ushort)0x0080) +#define BD_ENET_RX_MC ((ushort)0x0040) #define BD_ENET_RX_LG ((ushort)0x0020) #define BD_ENET_RX_NO ((ushort)0x0010) #define BD_ENET_RX_SH ((ushort)0x0008) #define BD_ENET_RX_CR ((ushort)0x0004) #define BD_ENET_RX_OV ((ushort)0x0002) #define BD_ENET_RX_CL ((ushort)0x0001) +#define BD_ENET_RX_TR BD_ENET_RX_CL #define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ /* Buffer descriptor control/status used by Ethernet transmit. */ #define BD_ENET_TX_READY ((ushort)0x8000) #define BD_ENET_TX_PAD ((ushort)0x4000) +#define BD_ENET_TX_TO1 BD_ENET_TX_PAD #define BD_ENET_TX_WRAP ((ushort)0x2000) #define BD_ENET_TX_INTR ((ushort)0x1000) +#define BD_ENET_TX_TO2 BD_ENET_TX_INTR_ #define BD_ENET_TX_LAST ((ushort)0x0800) #define BD_ENET_TX_TC ((ushort)0x0400) #define BD_ENET_TX_DEF ((ushort)0x0200) +#define BD_ENET_TX_ABC BD_ENET_TX_DEF #define BD_ENET_TX_HB ((ushort)0x0100) #define BD_ENET_TX_LC ((ushort)0x0080) #define BD_ENET_TX_RL ((ushort)0x0040) @@ -83,4 +95,225 @@ typedef struct cpm_buf_desc { #define BD_ENET_TX_CSL ((ushort)0x0001) #define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ -#endif /* fec_h */ +#ifdef CONFIG_MCFFEC +/********************************************************************* +* +* Fast Ethernet Controller (FEC) +* +*********************************************************************/ +/* FEC private information */ +struct fec_info_s { + int index; + u32 iobase; + u32 pinmux; + u32 miibase; + int phy_addr; + int dup_spd; + char *phy_name; + int phyname_init; + cbd_t *rxbd; /* Rx BD */ + cbd_t *txbd; /* Tx BD */ + uint rxIdx; + uint txIdx; + char *txbuf; + int initialized; +}; + +/* Register read/write struct */ +typedef struct fec { + u8 resv0[0x4]; + u32 eir; + u32 eimr; + u8 resv1[0x4]; + u32 rdar; + u32 tdar; + u8 resv2[0xC]; + u32 ecr; + u8 resv3[0x18]; + u32 mmfr; + u32 mscr; + u8 resv4[0x1C]; + u32 mibc; + u8 resv5[0x1C]; + u32 rcr; + u8 resv6[0x3C]; + u32 tcr; + u8 resv7[0x1C]; + u32 palr; + u32 paur; + u32 opd; + u8 resv8[0x28]; + u32 iaur; + u32 ialr; + u32 gaur; + u32 galr; + u8 resv9[0x1C]; + u32 tfwr; + u8 resv10[0x4]; + u32 frbr; + u32 frsr; + u8 resv11[0x2C]; + u32 erdsr; + u32 etdsr; + u32 emrbr; + u8 resv12[0x74]; + + u32 rmon_t_drop; + u32 rmon_t_packets; + u32 rmon_t_bc_pkt; + u32 rmon_t_mc_pkt; + u32 rmon_t_crc_align; + u32 rmon_t_undersize; + u32 rmon_t_oversize; + u32 rmon_t_frag; + u32 rmon_t_jab; + u32 rmon_t_col; + u32 rmon_t_p64; + u32 rmon_t_p65to127; + u32 rmon_t_p128to255; + u32 rmon_t_p256to511; + u32 rmon_t_p512to1023; + u32 rmon_t_p1024to2047; + u32 rmon_t_p_gte2048; + u32 rmon_t_octets; + + u32 ieee_t_drop; + u32 ieee_t_frame_ok; + u32 ieee_t_1col; + u32 ieee_t_mcol; + u32 ieee_t_def; + u32 ieee_t_lcol; + u32 ieee_t_excol; + u32 ieee_t_macerr; + u32 ieee_t_cserr; + u32 ieee_t_sqe; + u32 ieee_t_fdxfc; + u32 ieee_t_octets_ok; + u8 resv13[0x8]; + + u32 rmon_r_drop; + u32 rmon_r_packets; + u32 rmon_r_bc_pkt; + u32 rmon_r_mc_pkt; + u32 rmon_r_crc_align; + u32 rmon_r_undersize; + u32 rmon_r_oversize; + u32 rmon_r_frag; + u32 rmon_r_jab; + u32 rmon_r_resvd_0; + u32 rmon_r_p64; + u32 rmon_r_p65to127; + u32 rmon_r_p128to255; + u32 rmon_r_p256to511; + u32 rmon_r_p512to1023; + u32 rmon_r_p1024to2047; + u32 rmon_r_p_gte2048; + u32 rmon_r_octets; + + u32 ieee_r_drop; + u32 ieee_r_frame_ok; + u32 ieee_r_crc; + u32 ieee_r_align; + u32 ieee_r_macerr; + u32 ieee_r_fdxfc; + u32 ieee_r_octets_ok; +} fec_t; + +/********************************************************************* +* Fast Ethernet Controller (FEC) +*********************************************************************/ +/* Bit definitions and macros for FEC_EIR */ +#define FEC_EIR_CLEAR_ALL (0xFFF80000) +#define FEC_EIR_HBERR (0x80000000) +#define FEC_EIR_BABR (0x40000000) +#define FEC_EIR_BABT (0x20000000) +#define FEC_EIR_GRA (0x10000000) +#define FEC_EIR_TXF (0x08000000) +#define FEC_EIR_TXB (0x04000000) +#define FEC_EIR_RXF (0x02000000) +#define FEC_EIR_RXB (0x01000000) +#define FEC_EIR_MII (0x00800000) +#define FEC_EIR_EBERR (0x00400000) +#define FEC_EIR_LC (0x00200000) +#define FEC_EIR_RL (0x00100000) +#define FEC_EIR_UN (0x00080000) + +/* Bit definitions and macros for FEC_RDAR */ +#define FEC_RDAR_R_DES_ACTIVE (0x01000000) + +/* Bit definitions and macros for FEC_TDAR */ +#define FEC_TDAR_X_DES_ACTIVE (0x01000000) + +/* Bit definitions and macros for FEC_ECR */ +#define FEC_ECR_ETHER_EN (0x00000002) +#define FEC_ECR_RESET (0x00000001) + +/* Bit definitions and macros for FEC_MMFR */ +#define FEC_MMFR_DATA(x) (((x)&0xFFFF)) +#define FEC_MMFR_ST(x) (((x)&0x03)<<30) +#define FEC_MMFR_ST_01 (0x40000000) +#define FEC_MMFR_OP_RD (0x20000000) +#define FEC_MMFR_OP_WR (0x10000000) +#define FEC_MMFR_PA(x) (((x)&0x1F)<<23) +#define FEC_MMFR_RA(x) (((x)&0x1F)<<18) +#define FEC_MMFR_TA(x) (((x)&0x03)<<16) +#define FEC_MMFR_TA_10 (0x00020000) + +/* Bit definitions and macros for FEC_MSCR */ +#define FEC_MSCR_DIS_PREAMBLE (0x00000080) +#define FEC_MSCR_MII_SPEED(x) (((x)&0x3F)<<1) + +/* Bit definitions and macros for FEC_MIBC */ +#define FEC_MIBC_MIB_DISABLE (0x80000000) +#define FEC_MIBC_MIB_IDLE (0x40000000) + +/* Bit definitions and macros for FEC_RCR */ +#define FEC_RCR_MAX_FL(x) (((x)&0x7FF)<<16) +#define FEC_RCR_FCE (0x00000020) +#define FEC_RCR_BC_REJ (0x00000010) +#define FEC_RCR_PROM (0x00000008) +#define FEC_RCR_MII_MODE (0x00000004) +#define FEC_RCR_DRT (0x00000002) +#define FEC_RCR_LOOP (0x00000001) + +/* Bit definitions and macros for FEC_TCR */ +#define FEC_TCR_RFC_PAUSE (0x00000010) +#define FEC_TCR_TFC_PAUSE (0x00000008) +#define FEC_TCR_FDEN (0x00000004) +#define FEC_TCR_HBC (0x00000002) +#define FEC_TCR_GTS (0x00000001) + +/* Bit definitions and macros for FEC_PAUR */ +#define FEC_PAUR_PADDR2(x) (((x)&0xFFFF)<<16) +#define FEC_PAUR_TYPE(x) ((x)&0xFFFF) + +/* Bit definitions and macros for FEC_OPD */ +#define FEC_OPD_PAUSE_DUR(x) (((x)&0x0000FFFF)<<0) +#define FEC_OPD_OPCODE(x) (((x)&0x0000FFFF)<<16) + +/* Bit definitions and macros for FEC_TFWR */ +#define FEC_TFWR_X_WMRK(x) ((x)&0x03) +#define FEC_TFWR_X_WMRK_64 (0x01) +#define FEC_TFWR_X_WMRK_128 (0x02) +#define FEC_TFWR_X_WMRK_192 (0x03) + +/* Bit definitions and macros for FEC_FRBR */ +#define FEC_FRBR_R_BOUND(x) (((x)&0xFF)<<2) + +/* Bit definitions and macros for FEC_FRSR */ +#define FEC_FRSR_R_FSTART(x) (((x)&0xFF)<<2) + +/* Bit definitions and macros for FEC_ERDSR */ +#define FEC_ERDSR_R_DES_START(x)(((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for FEC_ETDSR */ +#define FEC_ETDSR_X_DES_START(x)(((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for FEC_EMRBR */ +#define FEC_EMRBR_R_BUF_SIZE(x) (((x)&0x7F)<<4) + +#define FEC_RESET_DELAY 100 +#define FEC_RX_TOUT 100 + +#endif /* CONFIG_MCFFEC */ +#endif /* fec_h */ diff --git a/include/asm-m68k/immap_5329.h b/include/asm-m68k/immap_5329.h new file mode 100644 index 0000000..5ef1265 --- /dev/null +++ b/include/asm-m68k/immap_5329.h @@ -0,0 +1,793 @@ +/* + * MCF5329 Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5329__ +#define __IMMAP_5329__ + +#define MMAP_SCM1 0xEC000000 +#define MMAP_MDHA 0xEC080000 +#define MMAP_SKHA 0xEC084000 +#define MMAP_RNG 0xEC088000 +#define MMAP_SCM2 0xFC000000 +#define MMAP_XBS 0xFC004000 +#define MMAP_FBCS 0xFC008000 +#define MMAP_CAN 0xFC020000 +#define MMAP_FEC 0xFC030000 +#define MMAP_SCM3 0xFC040000 +#define MMAP_EDMA 0xFC044000 +#define MMAP_TCD 0xFC045000 +#define MMAP_INTC0 0xFC048000 +#define MMAP_INTC1 0xFC04C000 +#define MMAP_INTCACK 0xFC054000 +#define MMAP_I2C 0xFC058000 +#define MMAP_QSPI 0xFC05C000 +#define MMAP_UART0 0xFC060000 +#define MMAP_UART1 0xFC064000 +#define MMAP_UART2 0xFC068000 +#define MMAP_DTMR0 0xFC070000 +#define MMAP_DTMR1 0xFC074000 +#define MMAP_DTMR2 0xFC078000 +#define MMAP_DTMR3 0xFC07C000 +#define MMAP_PIT0 0xFC080000 +#define MMAP_PIT1 0xFC084000 +#define MMAP_PIT2 0xFC088000 +#define MMAP_PIT3 0xFC08C000 +#define MMAP_PWM 0xFC090000 +#define MMAP_EPORT 0xFC094000 +#define MMAP_WDOG 0xFC098000 +#define MMAP_CCM 0xFC0A0000 +#define MMAP_GPIO 0xFC0A4000 +#define MMAP_RTC 0xFC0A8000 +#define MMAP_LCDC 0xFC0AC000 +#define MMAP_USBOTG 0xFC0B0000 +#define MMAP_USBH 0xFC0B4000 +#define MMAP_SDRAM 0xFC0B8000 +#define MMAP_SSI 0xFC0BC000 +#define MMAP_PLL 0xFC0C0000 + +/* System control module registers */ +typedef struct scm1_ctrl { + u32 mpr0; /* 0x00 Master Privilege Register 0 */ + u32 res1[15]; /* 0x04 - 0x3F */ + u32 pacrh; /* 0x40 Peripheral Access Control Register H */ + u32 res2[3]; /* 0x44 - 0x53 */ + u32 bmt0; /*0x54 Bus Monitor Timeout 0 */ +} scm1_t; + +/* Message Digest Hardware Accelerator */ +typedef struct mdha_ctrl { + u32 mdmr; /* 0x00 MDHA Mode Register */ + u32 mdcr; /* 0x04 Control register */ + u32 mdcmr; /* 0x08 Command Register */ + u32 mdsr; /* 0x0C Status Register */ + u32 mdisr; /* 0x10 Interrupt Status Register */ + u32 mdimr; /* 0x14 Interrupt Mask Register */ + u32 mddsr; /* 0x1C Data Size Register */ + u32 mdin; /* 0x20 Input FIFO */ + u32 res1[3]; /* 0x24 - 0x2F */ + u32 mdao; /* 0x30 Message Digest AO Register */ + u32 mdbo; /* 0x34 Message Digest BO Register */ + u32 mdco; /* 0x38 Message Digest CO Register */ + u32 mddo; /* 0x3C Message Digest DO Register */ + u32 mdeo; /* 0x40 Message Digest EO Register */ + u32 mdmds; /* 0x44 Message Data Size Register */ + u32 res[10]; /* 0x48 - 0x6F */ + u32 mda1; /* 0x70 Message Digest A1 Register */ + u32 mdb1; /* 0x74 Message Digest B1 Register */ + u32 mdc1; /* 0x78 Message Digest C1 Register */ + u32 mdd1; /* 0x7C Message Digest D1 Register */ + u32 mde1; /* 0x80 Message Digest E1 Register */ +} mdha_t; + +/* Symmetric Key Hardware Accelerator */ +typedef struct skha_ctrl { + u32 mr; /* 0x00 Mode Register */ + u32 cr; /* 0x04 Control Register */ + u32 cmr; /* 0x08 Command Register */ + u32 sr; /* 0x0C Status Register */ + u32 esr; /* 0x10 Error Status Register */ + u32 emr; /* 0x14 Error Status Mask Register) */ + u32 ksr; /* 0x18 Key Size Register */ + u32 dsr; /* 0x1C Data Size Register */ + u32 in; /* 0x20 Input FIFO */ + u32 out; /* 0x24 Output FIFO */ + u32 res1[2]; /* 0x28 - 0x2F */ + u32 kdr1; /* 0x30 Key Data Register 1 */ + u32 kdr2; /* 0x34 Key Data Register 2 */ + u32 kdr3; /* 0x38 Key Data Register 3 */ + u32 kdr4; /* 0x3C Key Data Register 4 */ + u32 kdr5; /* 0x40 Key Data Register 5 */ + u32 kdr6; /* 0x44 Key Data Register 6 */ + u32 res2[10]; /* 0x48 - 0x6F */ + u32 c1; /* 0x70 Context 1 */ + u32 c2; /* 0x74 Context 2 */ + u32 c3; /* 0x78 Context 3 */ + u32 c4; /* 0x7C Context 4 */ + u32 c5; /* 0x80 Context 5 */ + u32 c6; /* 0x84 Context 6 */ + u32 c7; /* 0x88 Context 7 */ + u32 c8; /* 0x8C Context 8 */ + u32 c9; /* 0x90 Context 9 */ + u32 c10; /* 0x94 Context 10 */ + u32 c11; /* 0x98 Context 11 */ +} skha_t; + +/* Random Number Generator */ +typedef struct rng_ctrl { + u32 rngcr; /* 0x00 RNG Control Register */ + u32 rngsr; /* 0x04 RNG Status Register */ + u32 rnger; /* 0x08 RNG Entropy Register */ + u32 rngout; /* 0x0C RNG Output FIFO */ +} rng_t; + +/* System control module registers 2 */ +typedef struct scm2_ctrl { + u32 mpr1; /* 0x00 Master Privilege Register */ + u32 res1[7]; /* 0x04 - 0x1F */ + u32 pacra; /* 0x20 Peripheral Access Control Register A */ + u32 pacrb; /* 0x24 Peripheral Access Control Register B */ + u32 pacrc; /* 0x28 Peripheral Access Control Register C */ + u32 pacrd; /* 0x2C Peripheral Access Control Register D */ + u32 res2[4]; /* 0x30 - 0x3F */ + u32 pacre; /* 0x40 Peripheral Access Control Register E */ + u32 pacrf; /* 0x44 Peripheral Access Control Register F */ + u32 pacrg; /* 0x48 Peripheral Access Control Register G */ + u32 res3[2]; /* 0x4C - 0x53 */ + u32 bmt1; /* 0x54 Bus Monitor Timeout 1 */ +} scm2_t; + +/* Cross-Bar Switch Module */ +typedef struct xbs_ctrl { + u32 prs1; /* 0x100 Priority Register Slave 1 */ + u32 res1[3]; /* 0x104 - 0F */ + u32 crs1; /* 0x110 Control Register Slave 1 */ + u32 res2[187]; /* 0x114 - 0x3FF */ + + u32 prs4; /* 0x400 Priority Register Slave 4 */ + u32 res3[3]; /* 0x404 - 0F */ + u32 crs4; /* 0x410 Control Register Slave 4 */ + u32 res4[123]; /* 0x414 - 0x5FF */ + + u32 prs6; /* 0x600 Priority Register Slave 6 */ + u32 res5[3]; /* 0x604 - 0F */ + u32 crs6; /* 0x610 Control Register Slave 6 */ + u32 res6[59]; /* 0x614 - 0x6FF */ + + u32 prs7; /* 0x700 Priority Register Slave 7 */ + u32 res7[3]; /* 0x704 - 0F */ + u32 crs7; /* 0x710 Control Register Slave 7 */ +} xbs_t; + +/* Flexbus module Chip select registers */ +typedef struct fbcs_ctrl { + u16 csar0; /* 0x00 Chip-Select Address Register 0 */ + u16 res0; + u32 csmr0; /* 0x04 Chip-Select Mask Register 0 */ + u32 cscr0; /* 0x08 Chip-Select Control Register 0 */ + + u16 csar1; /* 0x0C Chip-Select Address Register 1 */ + u16 res1; + u32 csmr1; /* 0x10 Chip-Select Mask Register 1 */ + u32 cscr1; /* 0x14 Chip-Select Control Register 1 */ + + u16 csar2; /* 0x18 Chip-Select Address Register 2 */ + u16 res2; + u32 csmr2; /* 0x1C Chip-Select Mask Register 2 */ + u32 cscr2; /* 0x20 Chip-Select Control Register 2 */ + + u16 csar3; /* 0x24 Chip-Select Address Register 3 */ + u16 res3; + u32 csmr3; /* 0x28 Chip-Select Mask Register 3 */ + u32 cscr3; /* 0x2C Chip-Select Control Register 3 */ + + u16 csar4; /* 0x30 Chip-Select Address Register 4 */ + u16 res4; + u32 csmr4; /* 0x34 Chip-Select Mask Register 4 */ + u32 cscr4; /* 0x38 Chip-Select Control Register 4 */ + + u16 csar5; /* 0x3C Chip-Select Address Register 5 */ + u16 res5; + u32 csmr5; /* 0x40 Chip-Select Mask Register 5 */ + u32 cscr5; /* 0x44 Chip-Select Control Register 5 */ +} fbcs_t; + +/* FlexCan module registers */ +typedef struct can_ctrl { + u32 mcr; /* 0x00 Module Configuration register */ + u32 ctrl; /* 0x04 Control register */ + u32 timer; /* 0x08 Free Running Timer */ + u32 res1; /* 0x0C */ + u32 rxgmask; /* 0x10 Rx Global Mask */ + u32 rx14mask; /* 0x14 RxBuffer 14 Mask */ + u32 rx15mask; /* 0x18 RxBuffer 15 Mask */ + u32 errcnt; /* 0x1C Error Counter Register */ + u32 errstat; /* 0x20 Error and status Register */ + u32 res2; /* 0x24 */ + u32 imask; /* 0x28 Interrupt Mask Register */ + u32 res3; /* 0x2C */ + u32 iflag; /* 0x30 Interrupt Flag Register */ + u32 res4[19]; /* 0x34 - 0x7F */ + u32 MB0_15[2048]; /* 0x80 Message Buffer 0-15 */ +} can_t; + +/* System Control Module register 3 */ +typedef struct scm3_ctrl { + u8 res1[19]; /* 0x00 - 0x12 */ + u8 wcr; /* 0x13 wakeup control register */ + u16 res2; /* 0x14 - 0x15 */ + u16 cwcr; /* 0x16 Core Watchdog Control Register */ + u8 res3[3]; /* 0x18 - 0x1A */ + u8 cwsr; /* 0x1B Core Watchdog Service Register */ + u8 res4[2]; /* 0x1C - 0x1D */ + u8 scmisr; /* 0x1F Interrupt Status Register */ + u32 res5; /* 0x20 */ + u32 bcr; /* 0x24 Burst Configuration Register */ + u32 res6[18]; /* 0x28 - 0x6F */ + u32 cfadr; /* 0x70 Core Fault Address Register */ + u8 res7[4]; /* 0x71 - 0x74 */ + u8 cfier; /* 0x75 Core Fault Interrupt Enable Register */ + u8 cfloc; /* 0x76 Core Fault Location Register */ + u8 cfatr; /* 0x77 Core Fault Attributes Register */ + u32 res8; /* 0x78 */ + u32 cfdtr; /* 0x7C Core Fault Data Register */ +} scm3_t; + +/* eDMA module registers */ +typedef struct edma_ctrl { + u32 cr; /* 0x00 Control Register */ + u32 es; /* 0x04 Error Status Register */ + u16 res1[3]; /* 0x08 - 0x0D */ + u16 erq; /* 0x0E Enable Request Register */ + u16 res2[3]; /* 0x10 - 0x15 */ + u16 eei; /* 0x16 Enable Error Interrupt Request */ + u8 serq; /* 0x18 Set Enable Request */ + u8 cerq; /* 0x19 Clear Enable Request */ + u8 seei; /* 0x1A Set Enable Error Interrupt Request */ + u8 ceei; /* 0x1B Clear Enable Error Interrupt Request */ + u8 cint; /* 0x1C Clear Interrupt Enable Register */ + u8 cerr; /* 0x1D Clear Error Register */ + u8 ssrt; /* 0x1E Set START Bit Register */ + u8 cdne; /* 0x1F Clear DONE Status Bit Register */ + u16 res3[3]; /* 0x20 - 0x25 */ + u16 intr; /* 0x26 Interrupt Request Register */ + u16 res4[3]; /* 0x28 - 0x2D */ + u16 err; /* 0x2E Error Register */ + u32 res5[52]; /* 0x30 - 0xFF */ + u8 dchpri0; /* 0x100 Channel 0 Priority Register */ + u8 dchpri1; /* 0x101 Channel 1 Priority Register */ + u8 dchpri2; /* 0x102 Channel 2 Priority Register */ + u8 dchpri3; /* 0x103 Channel 3 Priority Register */ + u8 dchpri4; /* 0x104 Channel 4 Priority Register */ + u8 dchpri5; /* 0x105 Channel 5 Priority Register */ + u8 dchpri6; /* 0x106 Channel 6 Priority Register */ + u8 dchpri7; /* 0x107 Channel 7 Priority Register */ + u8 dchpri8; /* 0x108 Channel 8 Priority Register */ + u8 dchpri9; /* 0x109 Channel 9 Priority Register */ + u8 dchpri10; /* 0x110 Channel 10 Priority Register */ + u8 dchpri11; /* 0x111 Channel 11 Priority Register */ + u8 dchpri12; /* 0x112 Channel 12 Priority Register */ + u8 dchpri13; /* 0x113 Channel 13 Priority Register */ + u8 dchpri14; /* 0x114 Channel 14 Priority Register */ + u8 dchpri15; /* 0x115 Channel 15 Priority Register */ +} edma_t; + +/* TCD - eDMA*/ +typedef struct tcd_ctrl { + u32 saddr; /* 0x00 Source Address */ + u16 attr; /* 0x04 Transfer Attributes */ + u16 soff; /* 0x06 Signed Source Address Offset */ + u32 nbytes; /* 0x08 Minor Byte Count */ + u32 slast; /* 0x0C Last Source Address Adjustment */ + u32 daddr; /* 0x10 Destination address */ + u16 citer; /* 0x14 Current Minor Loop Link, Major Loop Count */ + u16 doff; /* 0x16 Signed Destination Address Offset */ + u32 dlast_sga; /* 0x18 Last Destination Address Adjustment/Scatter Gather Address */ + u16 biter; /* 0x1C Beginning Minor Loop Link, Major Loop Count */ + u16 csr; /* 0x1E Control and Status */ +} tcd_st; + +typedef struct tcd_multiple { + tcd_st tcd[16]; +} tcd_t; + +/* Interrupt module registers */ +typedef struct int0_ctrl { + /* Interrupt Controller 0 */ + u32 iprh0; /* 0x00 Pending Register High */ + u32 iprl0; /* 0x04 Pending Register Low */ + u32 imrh0; /* 0x08 Mask Register High */ + u32 imrl0; /* 0x0C Mask Register Low */ + u32 frch0; /* 0x10 Force Register High */ + u32 frcl0; /* 0x14 Force Register Low */ + u16 res1; /* 0x18 - 0x19 */ + u16 icfg0; /* 0x1A Configuration Register */ + u8 simr0; /* 0x1C Set Interrupt Mask */ + u8 cimr0; /* 0x1D Clear Interrupt Mask */ + u8 clmask0; /* 0x1E Current Level Mask */ + u8 slmask; /* 0x1F Saved Level Mask */ + u32 res2[8]; /* 0x20 - 0x3F */ + u8 icr0[64]; /* 0x40 - 0x7F Control registers */ + u32 res3[24]; /* 0x80 - 0xDF */ + u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ + u8 res4[3]; /* 0xE1 - 0xE3 */ + u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res5[3]; /* 0xE5 - 0xE7 */ + u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE9 - 0xEB */ + u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xED - 0xEF */ + u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xF1 - 0xF3 */ + u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF5 - 0xF7 */ + u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF9 - 0xFB */ + u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xFD - 0xFF */ +} int0_t; + +typedef struct int1_ctrl { + /* Interrupt Controller 1 */ + u32 iprh1; /* 0x00 Pending Register High */ + u32 iprl1; /* 0x04 Pending Register Low */ + u32 imrh1; /* 0x08 Mask Register High */ + u32 imrl1; /* 0x0C Mask Register Low */ + u32 frch1; /* 0x10 Force Register High */ + u32 frcl1; /* 0x14 Force Register Low */ + u16 res1; /* 0x18 */ + u16 icfg1; /* 0x1A Configuration Register */ + u8 simr1; /* 0x1C Set Interrupt Mask */ + u8 cimr1; /* 0x1D Clear Interrupt Mask */ + u16 res2; /* 0x1E - 0x1F */ + u32 res3[8]; /* 0x20 - 0x3F */ + u8 icr1[64]; /* 0x40 - 0x7F */ + u32 res4[24]; /* 0x80 - 0xDF */ + u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */ + u8 res5[3]; /* 0xE1 - 0xE3 */ + u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE5 - 0xE7 */ + u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xE9 - 0xEB */ + u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xED - 0xEF */ + u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF1 - 0xF3 */ + u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF5 - 0xF7 */ + u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xF9 - 0xFB */ + u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resc[3]; /* 0xFD - 0xFF */ +} int1_t; + +typedef struct intgack_ctrl1 { + /* Global IACK Registers */ + u8 swiack; /* 0xE0 Global Software Interrupt Acknowledge */ + u8 Lniack[7]; /* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */ +} intgack_t; + +/*I2C module registers */ +typedef struct i2c_ctrl { + u8 adr; /* 0x00 address register */ + u8 res1[3]; /* 0x01 - 0x03 */ + u8 fdr; /* 0x04 frequency divider register */ + u8 res2[3]; /* 0x05 - 0x07 */ + u8 cr; /* 0x08 control register */ + u8 res3[3]; /* 0x09 - 0x0B */ + u8 sr; /* 0x0C status register */ + u8 res4[3]; /* 0x0D - 0x0F */ + u8 dr; /* 0x10 data register */ + u8 res5[3]; /* 0x11 - 0x13 */ +} i2c_t; + +/* QSPI module registers */ +typedef struct qspi_ctrl { + u16 qmr; /* Mode register */ + u16 res1; + u16 qdlyr; /* Delay register */ + u16 res2; + u16 qwr; /* Wrap register */ + u16 res3; + u16 qir; /* Interrupt register */ + u16 res4; + u16 qar; /* Address register */ + u16 res5; + u16 qdr; /* Data register */ + u16 res6; +} qspi_t; + +/* PWM module registers */ +typedef struct pwm_ctrl { + u8 en; /* 0x00 PWM Enable Register */ + u8 pol; /* 0x01 Polarity Register */ + u8 clk; /* 0x02 Clock Select Register */ + u8 prclk; /* 0x03 Prescale Clock Select Register */ + u8 cae; /* 0x04 Center Align Enable Register */ + u8 ctl; /* 0x05 Control Register */ + u8 res1[2]; /* 0x06 - 0x07 */ + u8 scla; /* 0x08 Scale A register */ + u8 sclb; /* 0x09 Scale B register */ + u8 res2[2]; /* 0x0A - 0x0B */ + u8 cnt0; /* 0x0C Channel 0 Counter register */ + u8 cnt1; /* 0x0D Channel 1 Counter register */ + u8 cnt2; /* 0x0E Channel 2 Counter register */ + u8 cnt3; /* 0x0F Channel 3 Counter register */ + u8 cnt4; /* 0x10 Channel 4 Counter register */ + u8 cnt5; /* 0x11 Channel 5 Counter register */ + u8 cnt6; /* 0x12 Channel 6 Counter register */ + u8 cnt7; /* 0x13 Channel 7 Counter register */ + u8 per0; /* 0x14 Channel 0 Period register */ + u8 per1; /* 0x15 Channel 1 Period register */ + u8 per2; /* 0x16 Channel 2 Period register */ + u8 per3; /* 0x17 Channel 3 Period register */ + u8 per4; /* 0x18 Channel 4 Period register */ + u8 per5; /* 0x19 Channel 5 Period register */ + u8 per6; /* 0x1A Channel 6 Period register */ + u8 per7; /* 0x1B Channel 7 Period register */ + u8 dty0; /* 0x1C Channel 0 Duty register */ + u8 dty1; /* 0x1D Channel 1 Duty register */ + u8 dty2; /* 0x1E Channel 2 Duty register */ + u8 dty3; /* 0x1F Channel 3 Duty register */ + u8 dty4; /* 0x20 Channel 4 Duty register */ + u8 dty5; /* 0x21 Channel 5 Duty register */ + u8 dty6; /* 0x22 Channel 6 Duty register */ + u8 dty7; /* 0x23 Channel 7 Duty register */ + u8 sdn; /* 0x24 Shutdown register */ + u8 res3[3]; /* 0x25 - 0x27 */ +} pwm_t; + +/* Edge Port module registers */ +typedef struct eport_ctrl { + u16 par; /* 0x00 Pin Assignment Register */ + u8 ddar; /* 0x02 Data Direction Register */ + u8 ier; /* 0x03 Interrupt Enable Register */ + u8 dr; /* 0x04 Data Register */ + u8 pdr; /* 0x05 Pin Data Register */ + u8 fr; /* 0x06 Flag_Register */ + u8 res1; +} eport_t; + +/* Watchdog registers */ +typedef struct wdog_ctrl { + u16 cr; /* 0x00 Control register */ + u16 mr; /* 0x02 Modulus register */ + u16 cntr; /* 0x04 Count register */ + u16 sr; /* 0x06 Service register */ +} wdog_t; + +/*Chip configuration module registers */ +typedef struct ccm_ctrl { + u8 rstctrl; /* 0x00 Reset Controller register */ + u8 rststat; /* 0x01 Reset Status register */ + u16 res1; /* 0x02 - 0x03 */ + u16 ccr; /* 0x04 Chip configuration register */ + u16 res2; /* 0x06 */ + u16 rcon; /* 0x08 Rreset configuration register */ + u16 cir; /* 0x0A Chip identification register */ + u32 res3; /* 0x0C */ + u16 misccr; /* 0x10 Miscellaneous control register */ + u16 cdr; /* 0x12 Clock divider register */ + u16 uhcsr; /* 0x14 USB Host controller status register */ + u16 uocsr; /* 0x16 USB On-the-Go Controller Status Register */ +} ccm_t; + +/* GPIO port registers */ +typedef struct gpio_ctrl { + /* Port Output Data Registers */ + u8 podr_fech; /* 0x00 */ + u8 podr_fecl; /* 0x01 */ + u8 podr_ssi; /* 0x02 */ + u8 podr_busctl; /* 0x03 */ + u8 podr_be; /* 0x04 */ + u8 podr_cs; /* 0x05 */ + u8 podr_pwm; /* 0x06 */ + u8 podr_feci2c; /* 0x07 */ + u8 res1; /* 0x08 */ + u8 podr_uart; /* 0x09 */ + u8 podr_qspi; /* 0x0A */ + u8 podr_timer; /* 0x0B */ + u8 res2; /* 0x0C */ + u8 podr_lcddatah; /* 0x0D */ + u8 podr_lcddatam; /* 0x0E */ + u8 podr_lcddatal; /* 0x0F */ + u8 podr_lcdctlh; /* 0x10 */ + u8 podr_lcdctll; /* 0x11 */ + + /* Port Data Direction Registers */ + u16 res3; /* 0x12 - 0x13 */ + u8 pddr_fech; /* 0x14 */ + u8 pddr_fecl; /* 0x15 */ + u8 pddr_ssi; /* 0x16 */ + u8 pddr_busctl; /* 0x17 */ + u8 pddr_be; /* 0x18 */ + u8 pddr_cs; /* 0x19 */ + u8 pddr_pwm; /* 0x1A */ + u8 pddr_feci2c; /* 0x1B */ + u8 res4; /* 0x1C */ + u8 pddr_uart; /* 0x1D */ + u8 pddr_qspi; /* 0x1E */ + u8 pddr_timer; /* 0x1F */ + u8 res5; /* 0x20 */ + u8 pddr_lcddatah; /* 0x21 */ + u8 pddr_lcddatam; /* 0x22 */ + u8 pddr_lcddatal; /* 0x23 */ + u8 pddr_lcdctlh; /* 0x24 */ + u8 pddr_lcdctll; /* 0x25 */ + u16 res6; /* 0x26 - 0x27 */ + + /* Port Data Direction Registers */ + u8 ppd_fech; /* 0x28 */ + u8 ppd_fecl; /* 0x29 */ + u8 ppd_ssi; /* 0x2A */ + u8 ppd_busctl; /* 0x2B */ + u8 ppd_be; /* 0x2C */ + u8 ppd_cs; /* 0x2D */ + u8 ppd_pwm; /* 0x2E */ + u8 ppd_feci2c; /* 0x2F */ + u8 res7; /* 0x30 */ + u8 ppd_uart; /* 0x31 */ + u8 ppd_qspi; /* 0x32 */ + u8 ppd_timer; /* 0x33 */ + u8 res8; /* 0x34 */ + u8 ppd_lcddatah; /* 0x35 */ + u8 ppd_lcddatam; /* 0x36 */ + u8 ppd_lcddatal; /* 0x37 */ + u8 ppd_lcdctlh; /* 0x38 */ + u8 ppd_lcdctll; /* 0x39 */ + u16 res9; /* 0x3A - 0x3B */ + + /* Port Clear Output Data Registers */ + u8 pclrr_fech; /* 0x3C */ + u8 pclrr_fecl; /* 0x3D */ + u8 pclrr_ssi; /* 0x3E */ + u8 pclrr_busctl; /* 0x3F */ + u8 pclrr_be; /* 0x40 */ + u8 pclrr_cs; /* 0x41 */ + u8 pclrr_pwm; /* 0x42 */ + u8 pclrr_feci2c; /* 0x43 */ + u8 res10; /* 0x44 */ + u8 pclrr_uart; /* 0x45 */ + u8 pclrr_qspi; /* 0x46 */ + u8 pclrr_timer; /* 0x47 */ + u8 res11; /* 0x48 */ + u8 pclrr_lcddatah; /* 0x49 */ + u8 pclrr_lcddatam; /* 0x4A */ + u8 pclrr_lcddatal; /* 0x4B */ + u8 pclrr_lcdctlh; /* 0x4C */ + u8 pclrr_lcdctll; /* 0x4D */ + u16 res12; /* 0x4E - 0x4F */ + + /* Pin Assignment Registers */ + u8 par_fec; /* 0x50 */ + u8 par_pwm; /* 0x51 */ + u8 par_busctl; /* 0x52 */ + u8 par_feci2c; /* 0x53 */ + u8 par_be; /* 0x54 */ + u8 par_cs; /* 0x55 */ + u16 par_ssi; /* 0x56 */ + u16 par_uart; /* 0x58 */ + u16 par_qspi; /* 0x5A */ + u8 par_timer; /* 0x5C */ + u8 par_lcddata; /* 0x5D */ + u16 par_lcdctl; /* 0x5E */ + u16 par_irq; /* 0x60 */ + u16 res16; /* 0x62 - 0x63 */ + + /* Mode Select Control Registers */ + u8 mscr_flexbus; /* 0x64 */ + u8 mscr_sdram; /* 0x65 */ + u16 res17; /* 0x66 - 0x67 */ + + /* Drive Strength Control Registers */ + u8 dscr_i2c; /* 0x68 */ + u8 dscr_pwm; /* 0x69 */ + u8 dscr_fec; /* 0x6A */ + u8 dscr_uart; /* 0x6B */ + u8 dscr_qspi; /* 0x6C */ + u8 dscr_timer; /* 0x6D */ + u8 dscr_ssi; /* 0x6E */ + u8 dscr_lcd; /* 0x6F */ + u8 dscr_debug; /* 0x70 */ + u8 dscr_clkrst; /* 0x71 */ + u8 dscr_irq; /* 0x72 */ +} gpio_t; + +/* LCD module registers */ +typedef struct lcd_ctrl { + u32 ssar; /* 0x00 Screen Start Address Register */ + u32 sr; /* 0x04 LCD Size Register */ + u32 vpw; /* 0x08 Virtual Page Width Register */ + u32 cpr; /* 0x0C Cursor Position Register */ + u32 cwhb; /* 0x10 Cursor Width Height and Blink Register */ + u32 ccmr; /* 0x14 Color Cursor Mapping Register */ + u32 pcr; /* 0x18 Panel Configuration Register */ + u32 hcr; /* 0x1C Horizontal Configuration Register */ + u32 vcr; /* 0x20 Vertical Configuration Register */ + u32 por; /* 0x24 Panning Offset Register */ + u32 scr; /* 0x28 Sharp Configuration Register */ + u32 pccr; /* 0x2C PWM Contrast Control Register */ + u32 dcr; /* 0x30 DMA Control Register */ + u32 rmcr; /* 0x34 Refresh Mode Control Register */ + u32 icr; /* 0x38 Refresh Mode Control Register */ + u32 ier; /* 0x3C Interrupt Enable Register */ + u32 isr; /* 0x40 Interrupt Status Register */ + u32 res[4]; + u32 gwsar; /* 0x50 Graphic Window Start Address Register */ + u32 gwsr; /* 0x54 Graphic Window Size Register */ + u32 gwvpw; /* 0x58 Graphic Window Virtual Page Width Register */ + u32 gwpor; /* 0x5C Graphic Window Panning Offset Register */ + u32 gwpr; /* 0x60 Graphic Window Position Register */ + u32 gwcr; /* 0x64 Graphic Window Control Register */ + u32 gwdcr; /* 0x68 Graphic Window DMA Control Register */ +} lcd_t; + +typedef struct lcdbg_ctrl { + u32 bglut[255]; +} lcdbg_t; + +typedef struct lcdgw_ctrl { + u32 gwlut[255]; +} lcdgw_t; + +/* USB OTG module registers */ +typedef struct usb_otg { + u32 id; /* 0x000 Identification Register */ + u32 hwgeneral; /* 0x004 General HW Parameters */ + u32 hwhost; /* 0x008 Host HW Parameters */ + u32 hwdev; /* 0x00C Device HW parameters */ + u32 hwtxbuf; /* 0x010 TX Buffer HW Parameters */ + u32 hwrxbuf; /* 0x014 RX Buffer HW Parameters */ + u32 res1[58]; /* 0x18 - 0xFF */ + u8 caplength; /* 0x100 Capability Register Length */ + u8 res2; /* 0x101 */ + u16 hciver; /* 0x102 Host Interface Version Number */ + u32 hcsparams; /* 0x104 Host Structural Parameters */ + u32 hccparams; /* 0x108 Host Capability Parameters */ + u32 res3[5]; /* 0x10C - 0x11F */ + u16 dciver; /* 0x120 Device Interface Version Number */ + u16 res4; /* 0x122 */ + u32 dccparams; /* 0x124 Device Capability Parameters */ + u32 res5[6]; /* 0x128 - 0x13F */ + u32 cmd; /* 0x140 USB Command */ + u32 sts; /* 0x144 USB Status */ + u32 intr; /* 0x148 USB Interrupt Enable */ + u32 frindex; /* 0x14C USB Frame Index */ + u32 res6; /* 0x150 */ + u32 prd_dev; /* 0x154 Periodic Frame List Base or Device Address */ + u32 aync_ep; /* 0x158 Current Asynchronous List or Address at Endpoint List Address */ + u32 ttctrl; /* 0x15C Host TT Asynchronous Buffer Control */ + u32 burstsize; /* 0x160 Master Interface Data Burst Size */ + u32 txfill; /* 0x164 Host Transmit FIFO Tuning Control */ + u32 res7[6]; /* 0x168 - 0x17F */ + u32 cfgflag; /* 0x180 Configure Flag Register */ + u32 portsc1; /* 0x184 Port Status/Control */ + u32 res8[7]; /* 0x188 - 0x1A3 */ + u32 otgsc; /* 0x1A4 On The Go Status and Control */ + u32 mode; /* 0x1A8 USB mode register */ + u32 eptsetstat; /* 0x1AC Endpoint Setup status */ + u32 eptprime; /* 0x1B0 Endpoint initialization */ + u32 eptflush; /* 0x1B4 Endpoint de-initialize */ + u32 eptstat; /* 0x1B8 Endpoint status */ + u32 eptcomplete; /* 0x1BC Endpoint Complete */ + u32 eptctrl0; /* 0x1C0 Endpoint control 0 */ + u32 eptctrl1; /* 0x1C4 Endpoint control 1 */ + u32 eptctrl2; /* 0x1C8 Endpoint control 2 */ + u32 eptctrl3; /* 0x1CC Endpoint control 3 */ +} usbotg_t; + +/* USB Host module registers */ +typedef struct usb_host { + u32 id; /* 0x000 Identification Register */ + u32 hwgeneral; /* 0x004 General HW Parameters */ + u32 hwhost; /* 0x008 Host HW Parameters */ + u32 res1; /* 0x0C */ + u32 hwtxbuf; /* 0x010 TX Buffer HW Parameters */ + u32 hwrxbuf; /* 0x014 RX Buffer HW Parameters */ + u32 res2[58]; /* 0x18 - 0xFF */ + + /* Host Controller Capability Register */ + u8 caplength; /* 0x100 Capability Register Length */ + u8 res3; /* 0x101 */ + u16 hciver; /* 0x102 Host Interface Version Number */ + u32 hcsparams; /* 0x104 Host Structural Parameters */ + u32 hccparams; /* 0x108 Host Capability Parameters */ + u32 res4[13]; /* 0x10C - 0x13F */ + + /* Host Controller Operational Register */ + u32 cmd; /* 0x140 USB Command */ + u32 sts; /* 0x144 USB Status */ + u32 intr; /* 0x148 USB Interrupt Enable */ + u32 frindex; /* 0x14C USB Frame Index */ + u32 res5; /* 0x150 (ctrl segment register in EHCI spec) */ + u32 prdlst; /* 0x154 Periodic Frame List Base Address */ + u32 aynclst; /* 0x158 Current Asynchronous List Address */ + u32 ttctrl; /* 0x15C Host TT Asynchronous Buffer Control (non-ehci) */ + u32 burstsize; /* 0x160 Master Interface Data Burst Size (non-ehci) */ + u32 txfill; /* 0x164 Host Transmit FIFO Tuning Control (non-ehci) */ + u32 res6[6]; /* 0x168 - 0x17F */ + u32 cfgflag; /* 0x180 Configure Flag Register */ + u32 portsc1; /* 0x184 Port Status/Control */ + u32 res7[8]; /* 0x188 - 0x1A7 */ + + /* non-ehci registers */ + u32 mode; /* 0x1A8 USB mode register */ + u32 eptsetstat; /* 0x1AC Endpoint Setup status */ + u32 eptprime; /* 0x1B0 Endpoint initialization */ + u32 eptflush; /* 0x1B4 Endpoint de-initialize */ + u32 eptstat; /* 0x1B8 Endpoint status */ + u32 eptcomplete; /* 0x1BC Endpoint Complete */ + u32 eptctrl0; /* 0x1C0 Endpoint control 0 */ + u32 eptctrl1; /* 0x1C4 Endpoint control 1 */ + u32 eptctrl2; /* 0x1C8 Endpoint control 2 */ + u32 eptctrl3; /* 0x1CC Endpoint control 3 */ +} usbhost_t; + +/* SDRAM controller registers */ +typedef struct sdram_ctrl { + u32 mode; /* 0x00 Mode/Extended Mode register */ + u32 ctrl; /* 0x04 Control register */ + u32 cfg1; /* 0x08 Configuration register 1 */ + u32 cfg2; /* 0x0C Configuration register 2 */ + u32 res1[64]; /* 0x10 - 0x10F */ + u32 cs0; /* 0x110 Chip Select 0 Configuration */ + u32 cs1; /* 0x114 Chip Select 1 Configuration */ +} sdram_t; + +/* Synchronous serial interface */ +typedef struct ssi_ctrl { + u32 tx0; /* 0x00 Transmit Data Register 0 */ + u32 tx1; /* 0x04 Transmit Data Register 1 */ + u32 rx0; /* 0x08 Receive Data Register 0 */ + u32 rx1; /* 0x0C Receive Data Register 1 */ + u32 cr; /* 0x10 Control Register */ + u32 isr; /* 0x14 Interrupt Status Register */ + u32 ier; /* 0x18 Interrupt Enable Register */ + u32 tcr; /* 0x1C Transmit Configuration Register */ + u32 rcr; /* 0x20 Receive Configuration Register */ + u32 ccr; /* 0x24 Clock Control Register */ + u32 res1; /* 0x28 */ + u32 fcsr; /* 0x2C FIFO Control/Status Register */ + u32 res2[2]; /* 0x30 - 0x37 */ + u32 acr; /* 0x38 AC97 Control Register */ + u32 acadd; /* 0x3C AC97 Command Address Register */ + u32 acdat; /* 0x40 AC97 Command Data Register */ + u32 atag; /* 0x44 AC97 Tag Register */ + u32 tmask; /* 0x48 Transmit Time Slot Mask Register */ + u32 rmask; /* 0x4C Receive Time Slot Mask Register */ +} ssi_t; + +/* Clock Module registers */ +typedef struct pll_ctrl { + u8 podr; /* 0x00 Output Divider Register */ + u8 res1[3]; + u8 pcr; /* 0x04 Control Register */ + u8 res2[3]; + u8 pmdr; /* 0x08 Modulation Divider Register */ + u8 res3[3]; + u8 pfdr; /* 0x0C Feedback Divider Register */ + u8 res4[3]; +} pll_t; + +#endif /* __IMMAP_5329__ */ diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index 7bbdefb..cec25d0 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -1,8 +1,214 @@ -#ifndef __ASM_M68K_IO_H_ -#define __ASM_M68K_IO_H_ +/* + * IO header file + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ -static inline void sync(void) + #ifndef __ASM_M68K_IO_H__ +#define __ASM_M68K_IO_H__ + +#include + +#define readb(addr) in_8((volatile u8 *)(addr)) +#define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) +#if !defined(__BIG_ENDIAN) +#define readw(addr) (*(volatile u16 *) (addr)) +#define readl(addr) (*(volatile u32 *) (addr)) +#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b)) +#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b)) +#else +#define readw(addr) in_le16((volatile u16 *)(addr)) +#define readl(addr) in_le32((volatile u32 *)(addr)) +#define writew(b,addr) out_le16((volatile u16 *)(addr),(b)) +#define writel(b,addr) out_le32((volatile u32 *)(addr),(b)) +#endif + +/* + * The insw/outsw/insl/outsl macros don't do byte-swapping. + * They are only used in practice for transferring buffers which + * are arrays of bytes, and byte-swapping is not appropriate in + * that case. - paulus + */ +#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns)) +#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns)) +#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) + +#define inb(port) in_8((u8 *)((port)+_IO_BASE)) +#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val)) +#if !defined(__BIG_ENDIAN) +#define inw(port) in_be16((u16 *)((port)+_IO_BASE)) +#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val)) +#define inl(port) in_be32((u32 *)((port)+_IO_BASE)) +#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val)) +#else +#define inw(port) in_le16((u16 *)((port)+_IO_BASE)) +#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val)) +#define inl(port) in_le32((u32 *)((port)+_IO_BASE)) +#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val)) +#endif + +extern inline void _insb(volatile u8 * port, void *buf, int ns) +{ + u8 *data = (u8 *) buf; + while (ns--) + *data++ = *port; +} + +extern inline void _outsb(volatile u8 * port, const void *buf, int ns) +{ + u8 *data = (u8 *) buf; + while (ns--) + *port = *data++; +} + +extern inline void _insw(volatile u16 * port, void *buf, int ns) +{ + u16 *data = (u16 *) buf; + while (ns--) + *data++ = __sw16(*port); +} + +extern inline void _outsw(volatile u16 * port, const void *buf, int ns) +{ + u16 *data = (u16 *) buf; + while (ns--) { + *port = __sw16(*data); + data++; + } +} + +extern inline void _insl(volatile u32 * port, void *buf, int nl) +{ + u32 *data = (u32 *) buf; + while (nl--) + *data++ = __sw32(*port); +} + +extern inline void _outsl(volatile u32 * port, const void *buf, int nl) +{ + u32 *data = (u32 *) buf; + while (nl--) { + *port = __sw32(*data); + data++; + } +} + +extern inline void _insw_ns(volatile u16 * port, void *buf, int ns) +{ + u16 *data = (u16 *) buf; + while (ns--) + *data++ = *port; +} + +extern inline void _outsw_ns(volatile u16 * port, const void *buf, int ns) +{ + u16 *data = (u16 *) buf; + while (ns--) { + *port = *data++; + } +} + +extern inline void _insl_ns(volatile u32 * port, void *buf, int nl) +{ + u32 *data = (u32 *) buf; + while (nl--) + *data++ = *port; +} + +extern inline void _outsl_ns(volatile u32 * port, const void *buf, int nl) +{ + u32 *data = (u32 *) buf; + while (nl--) { + *port = *data; + data++; + } +} + +/* + * The *_ns versions below don't do byte-swapping. + * Neither do the standard versions now, these are just here + * for older code. + */ +#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) + +#define IO_SPACE_LIMIT ~0 + +/* + * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. + */ +extern inline int in_8(volatile u8 * addr) +{ + return (int)*addr; +} + +extern inline void out_8(volatile u8 * addr, int val) +{ + *addr = (u8) val; +} + +extern inline int in_le16(volatile u16 * addr) +{ + return __sw16(*addr); +} + +extern inline int in_be16(volatile u16 * addr) +{ + return (*addr & 0xFFFF); +} + +extern inline void out_le16(volatile u16 * addr, int val) +{ + *addr = __sw16(val); +} + +extern inline void out_be16(volatile u16 * addr, int val) +{ + *addr = (u16) val; +} + +extern inline unsigned in_le32(volatile u32 * addr) +{ + return __sw32(*addr); +} + +extern inline unsigned in_be32(volatile u32 * addr) +{ + return (*addr); +} + +extern inline void out_le32(volatile unsigned *addr, int val) +{ + *addr = __sw32(val); +} + +extern inline void out_be32(volatile unsigned *addr, int val) { + *addr = val; } -#endif /* __ASM_M68K_IO_H_ */ +#endif /* __ASM_M68K_IO_H__ */ diff --git a/include/asm-m68k/m5329.h b/include/asm-m68k/m5329.h new file mode 100644 index 0000000..15bb121 --- /dev/null +++ b/include/asm-m68k/m5329.h @@ -0,0 +1,2023 @@ +/* + * mcf5329.h -- Definitions for Freescale Coldfire 5329 + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef mcf5329_h +#define mcf5329_h +/****************************************************************************/ + +/********************************************************************* +* System Control Module (SCM) +*********************************************************************/ +/* Bit definitions and macros for SCM_MPR */ +#define SCM_MPR_MPROT0(x) (((x)&0x0F)<<28) +#define SCM_MPR_MPROT1(x) (((x)&0x0F)<<24) +#define SCM_MPR_MPROT2(x) (((x)&0x0F)<<20) +#define SCM_MPR_MPROT4(x) (((x)&0x0F)<<12) +#define SCM_MPR_MPROT5(x) (((x)&0x0F)<<8) +#define SCM_MPR_MPROT6(x) (((x)&0x0F)<<4) +#define MPROT_MTR 4 +#define MPROT_MTW 2 +#define MPROT_MPL 1 + +/* Bit definitions and macros for SCM_BMT */ +#define BMT_BME (0x08) +#define BMT_8 (0x07) +#define BMT_16 (0x06) +#define BMT_32 (0x05) +#define BMT_64 (0x04) +#define BMT_128 (0x03) +#define BMT_256 (0x02) +#define BMT_512 (0x01) +#define BMT_1024 (0x00) + +/* Bit definitions and macros for SCM_PACRA */ +#define SCM_PACRA_PACR0(x) (((x)&0x0F)<<28) +#define SCM_PACRA_PACR1(x) (((x)&0x0F)<<24) +#define SCM_PACRA_PACR2(x) (((x)&0x0F)<<20) +#define PACR_SP 4 +#define PACR_WP 2 +#define PACR_TP 1 + +/* Bit definitions and macros for SCM_PACRB */ +#define SCM_PACRB_PACR8(x) (((x)&0x0F)<<28) +#define SCM_PACRB_PACR12(x) (((x)&0x0F)<<12) + +/* Bit definitions and macros for SCM_PACRC */ +#define SCM_PACRC_PACR16(x) (((x)&0x0F)<<28) +#define SCM_PACRC_PACR17(x) (((x)&0x0F)<<24) +#define SCM_PACRC_PACR18(x) (((x)&0x0F)<<20) +#define SCM_PACRC_PACR19(x) (((x)&0x0F)<<16) +#define SCM_PACRC_PACR21(x) (((x)&0x0F)<<8) +#define SCM_PACRC_PACR22(x) (((x)&0x0F)<<4) +#define SCM_PACRC_PACR23(x) (((x)&0x0F)<<0) + +/* Bit definitions and macros for SCM_PACRD */ +#define SCM_PACRD_PACR24(x) (((x)&0x0F)<<28) +#define SCM_PACRD_PACR25(x) (((x)&0x0F)<<24) +#define SCM_PACRD_PACR26(x) (((x)&0x0F)<<20) +#define SCM_PACRD_PACR28(x) (((x)&0x0F)<<12) +#define SCM_PACRD_PACR29(x) (((x)&0x0F)<<8) +#define SCM_PACRD_PACR30(x) (((x)&0x0F)<<4) +#define SCM_PACRD_PACR31(x) (((x)&0x0F)<<0) + +/* Bit definitions and macros for SCM_PACRE */ +#define SCM_PACRE_PACR32(x) (((x)&0x0F)<<28) +#define SCM_PACRE_PACR33(x) (((x)&0x0F)<<24) +#define SCM_PACRE_PACR34(x) (((x)&0x0F)<<20) +#define SCM_PACRE_PACR35(x) (((x)&0x0F)<<16) +#define SCM_PACRE_PACR36(x) (((x)&0x0F)<<12) +#define SCM_PACRE_PACR37(x) (((x)&0x0F)<<8) +#define SCM_PACRE_PACR38(x) (((x)&0x0F)<<4) + +/* Bit definitions and macros for SCM_PACRF */ +#define SCM_PACRF_PACR40(x) (((x)&0x0F)<<28) +#define SCM_PACRF_PACR41(x) (((x)&0x0F)<<24) +#define SCM_PACRF_PACR42(x) (((x)&0x0F)<<20) +#define SCM_PACRF_PACR43(x) (((x)&0x0F)<<16) +#define SCM_PACRF_PACR44(x) (((x)&0x0F)<<12) +#define SCM_PACRF_PACR45(x) (((x)&0x0F)<<8) +#define SCM_PACRF_PACR46(x) (((x)&0x0F)<<4) +#define SCM_PACRF_PACR47(x) (((x)&0x0F)<<0) + +/* Bit definitions and macros for SCM_PACRG */ +#define SCM_PACRG_PACR48(x) (((x)&0x0F)<<28) + +/* Bit definitions and macros for SCM_PACRH */ +#define SCM_PACRH_PACR56(x) (((x)&0x0F)<<28) +#define SCM_PACRH_PACR57(x) (((x)&0x0F)<<24) +#define SCM_PACRH_PACR58(x) (((x)&0x0F)<<20) + +/* PACRn Assignments */ +#define PACR0(x) SCM_PACRA_PACR0(x) +#define PACR1(x) SCM_PACRA_PACR1(x) +#define PACR2(x) SCM_PACRA_PACR2(x) +#define PACR8(x) SCM_PACRB_PACR8(x) +#define PACR12(x) SCM_PACRB_PACR12(x) +#define PACR16(x) SCM_PACRC_PACR16(x) +#define PACR17(x) SCM_PACRC_PACR17(x) +#define PACR18(x) SCM_PACRC_PACR18(x) +#define PACR19(x) SCM_PACRC_PACR19(x) +#define PACR21(x) SCM_PACRC_PACR21(x) +#define PACR22(x) SCM_PACRC_PACR22(x) +#define PACR23(x) SCM_PACRC_PACR23(x) +#define PACR24(x) SCM_PACRD_PACR24(x) +#define PACR25(x) SCM_PACRD_PACR25(x) +#define PACR26(x) SCM_PACRD_PACR26(x) +#define PACR28(x) SCM_PACRD_PACR28(x) +#define PACR29(x) SCM_PACRD_PACR29(x) +#define PACR30(x) SCM_PACRD_PACR30(x) +#define PACR31(x) SCM_PACRD_PACR31(x) +#define PACR32(x) SCM_PACRE_PACR32(x) +#define PACR33(x) SCM_PACRE_PACR33(x) +#define PACR34(x) SCM_PACRE_PACR34(x) +#define PACR35(x) SCM_PACRE_PACR35(x) +#define PACR36(x) SCM_PACRE_PACR36(x) +#define PACR37(x) SCM_PACRE_PACR37(x) +#define PACR38(x) SCM_PACRE_PACR38(x) +#define PACR40(x) SCM_PACRF_PACR40(x) +#define PACR41(x) SCM_PACRF_PACR41(x) +#define PACR42(x) SCM_PACRF_PACR42(x) +#define PACR43(x) SCM_PACRF_PACR43(x) +#define PACR44(x) SCM_PACRF_PACR44(x) +#define PACR45(x) SCM_PACRF_PACR45(x) +#define PACR46(x) SCM_PACRF_PACR46(x) +#define PACR47(x) SCM_PACRF_PACR47(x) +#define PACR48(x) SCM_PACRG_PACR48(x) +#define PACR56(x) SCM_PACRH_PACR56(x) +#define PACR57(x) SCM_PACRH_PACR57(x) +#define PACR58(x) SCM_PACRH_PACR58(x) + +/* Bit definitions and macros for SCM_CWCR */ +#define CWCR_RO (0x8000) +#define CWCR_CWR_WH (0x0100) +#define CWCR_CWE (0x0080) +#define CWRI_WINDOW (0x0060) +#define CWRI_RESET (0x0040) +#define CWRI_INT_RESET (0x0020) +#define CWRI_INT (0x0000) +#define CWCR_CWT(x) (((x)&0x001F)) + +/* Bit definitions and macros for SCM_ISR */ +#define SCMISR_CFEI (0x02) +#define SCMISR_CWIC (0x01) + +/* Bit definitions and macros for SCM_BCR */ +#define BCR_GBR (0x00000200) +#define BCR_GBW (0x00000100) +#define BCR_S7 (0x00000080) +#define BCR_S6 (0x00000040) +#define BCR_S4 (0x00000010) +#define BCR_S1 (0x00000002) + +/* Bit definitions and macros for SCM_CFIER */ +#define CFIER_ECFEI (0x01) + +/* Bit definitions and macros for SCM_CFLOC */ +#define CFLOC_LOC (0x80) + +/* Bit definitions and macros for SCM_CFATR */ +#define CFATR_WRITE (0x80) +#define CFATR_SZ32 (0x20) +#define CFATR_SZ16 (0x10) +#define CFATR_SZ08 (0x00) +#define CFATR_CACHE (0x08) +#define CFATR_MODE (0x02) +#define CFATR_TYPE (0x01) + +/********************************************************************* +* +* Random Number Generator (RNG) +* +*********************************************************************/ +/* Bit definitions and macros for RNG_RNGCR */ +#define RNGCR_CI (0x00000008) +#define RNGCR_IM (0x00000004) +#define RNGCR_HA (0x00000002) +#define RNGCR_GO (0x00000001) + +/* Bit definitions and macros for RNG_RNGSR */ +#define RNGSR_OFS(x) (((x)&0xFF)<<16) +#define RNGSR_OFL(x) (((x)&0xFF)<<8) +#define RNGSR_EI (0x00000008) +#define RNGSR_FUF (0x00000004) +#define RNGSR_LRS (0x00000002) +#define RNGSR_SV (0x00000001) + +/********************************************************************* +* FlexBus Chip Selects (FBCS) +*********************************************************************/ +/* Bit definitions and macros for FBCS_CSAR */ +#define CSAR_BA(x) (((x)&0xFFFF)<<16) + +/* Bit definitions and macros for FBCS_CSMR */ +#define CSMR_BAM(x) (((x)&0xFFFF)<<16) +#define CSMR_BAM_4G (0xFFFF0000) +#define CSMR_BAM_2G (0x7FFF0000) +#define CSMR_BAM_1G (0x3FFF0000) +#define CSMR_BAM_1024M (0x3FFF0000) +#define CSMR_BAM_512M (0x1FFF0000) +#define CSMR_BAM_256M (0x0FFF0000) +#define CSMR_BAM_128M (0x07FF0000) +#define CSMR_BAM_64M (0x03FF0000) +#define CSMR_BAM_32M (0x01FF0000) +#define CSMR_BAM_16M (0x00FF0000) +#define CSMR_BAM_8M (0x007F0000) +#define CSMR_BAM_4M (0x003F0000) +#define CSMR_BAM_2M (0x001F0000) +#define CSMR_BAM_1M (0x000F0000) +#define CSMR_BAM_1024K (0x000F0000) +#define CSMR_BAM_512K (0x00070000) +#define CSMR_BAM_256K (0x00030000) +#define CSMR_BAM_128K (0x00010000) +#define CSMR_BAM_64K (0x00000000) +#define CSMR_WP (0x00000100) +#define CSMR_V (0x00000001) + +/* Bit definitions and macros for FBCS_CSCR */ +#define CSCR_SWS(x) (((x)&0x3F)<<26) +#define CSCR_ASET(x) (((x)&0x03)<<20) +#define CSCR_SWSEN (0x00800000) +#define CSCR_ASET_4CLK (0x00300000) +#define CSCR_ASET_3CLK (0x00200000) +#define CSCR_ASET_2CLK (0x00100000) +#define CSCR_ASET_1CLK (0x00000000) +#define CSCR_RDAH(x) (((x)&0x03)<<18) +#define CSCR_RDAH_4CYC (0x000C0000) +#define CSCR_RDAH_3CYC (0x00080000) +#define CSCR_RDAH_2CYC (0x00040000) +#define CSCR_RDAH_1CYC (0x00000000) +#define CSCR_WRAH(x) (((x)&0x03)<<16) +#define CSCR_WDAH_4CYC (0x00003000) +#define CSCR_WDAH_3CYC (0x00002000) +#define CSCR_WDAH_2CYC (0x00001000) +#define CSCR_WDAH_1CYC (0x00000000) +#define CSCR_WS(x) (((x)&0x3F)<<10) +#define CSCR_SBM (0x00000200) +#define CSCR_AA (0x00000100) +#define CSCR_PS_MASK (0x000000C0) +#define CSCR_PS_32 (0x00000000) +#define CSCR_PS_16 (0x00000080) +#define CSCR_PS_8 (0x00000040) +#define CSCR_BEM (0x00000020) +#define CSCR_BSTR (0x00000010) +#define CSCR_BSTW (0x00000008) + +/********************************************************************* +* FlexCAN Module (CAN) +*********************************************************************/ +/* Bit definitions and macros for CAN_CANMCR */ +#define CANMCR_MDIS (0x80000000) +#define CANMCR_FRZ (0x40000000) +#define CANMCR_HALT (0x10000000) +#define CANMCR_NORDY (0x08000000) +#define CANMCR_SOFTRST (0x02000000) +#define CANMCR_FRZACK (0x01000000) +#define CANMCR_SUPV (0x00800000) +#define CANMCR_LPMACK (0x00100000) +#define CANMCR_MAXMB(x) (((x)&0x0F)) + +/* Bit definitions and macros for CAN_CANCTRL */ +#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) +#define CANCTRL_RJW(x) (((x)&0x03)<<22) +#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) +#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) +#define CANCTRL_BOFFMSK (0x00008000) +#define CANCTRL_ERRMSK (0x00004000) +#define CANCTRL_CLKSRC (0x00002000) +#define CANCTRL_LPB (0x00001000) +#define CANCTRL_SMP (0x00000080) +#define CANCTRL_BOFFREC (0x00000040) +#define CANCTRL_TSYNC (0x00000020) +#define CANCTRL_LBUF (0x00000010) +#define CANCTRL_LOM (0x00000008) +#define CANCTRL_PROPSEG(x) (((x)&0x07)) + +/* Bit definitions and macros for CAN_TIMER */ +#define TIMER_TIMER(x) ((x)&0xFFFF) + +/* Bit definitions and macros for CAN_RXGMASK */ +#define RXGMASK_MI(x) ((x)&0x1FFFFFFF) + +/* Bit definitions and macros for CAN_ERRCNT */ +#define ERRCNT_TXECTR(x) (((x)&0xFF)) +#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) + +/* Bit definitions and macros for CAN_ERRSTAT */ +#define ERRSTAT_BITERR1 (0x00008000) +#define ERRSTAT_BITERR0 (0x00004000) +#define ERRSTAT_ACKERR (0x00002000) +#define ERRSTAT_CRCERR (0x00001000) +#define ERRSTAT_FRMERR (0x00000800) +#define ERRSTAT_STFERR (0x00000400) +#define ERRSTAT_TXWRN (0x00000200) +#define ERRSTAT_RXWRN (0x00000100) +#define ERRSTAT_IDLE (0x00000080) +#define ERRSTAT_TXRX (0x00000040) +#define ERRSTAT_FLT_BUSOFF (0x00000020) +#define ERRSTAT_FLT_PASSIVE (0x00000010) +#define ERRSTAT_FLT_ACTIVE (0x00000000) +#define ERRSTAT_BOFFINT (0x00000004) +#define ERRSTAT_ERRINT (0x00000002) +#define ERRSTAT_WAKINT (0x00000001) + +/* Bit definitions and macros for CAN_IMASK */ +#define IMASK_BUF15M (0x00008000) +#define IMASK_BUF14M (0x00004000) +#define IMASK_BUF13M (0x00002000) +#define IMASK_BUF12M (0x00001000) +#define IMASK_BUF11M (0x00000800) +#define IMASK_BUF10M (0x00000400) +#define IMASK_BUF9M (0x00000200) +#define IMASK_BUF8M (0x00000100) +#define IMASK_BUF7M (0x00000080) +#define IMASK_BUF6M (0x00000040) +#define IMASK_BUF5M (0x00000020) +#define IMASK_BUF4M (0x00000010) +#define IMASK_BUF3M (0x00000008) +#define IMASK_BUF2M (0x00000004) +#define IMASK_BUF1M (0x00000002) +#define IMASK_BUF0M (0x00000001) + +/* Bit definitions and macros for CAN_IFLAG */ +#define IFLAG_BUF15I (0x00008000) +#define IFLAG_BUF14I (0x00004000) +#define IFLAG_BUF13I (0x00002000) +#define IFLAG_BUF12I (0x00001000) +#define IFLAG_BUF11I (0x00000800) +#define IFLAG_BUF10I (0x00000400) +#define IFLAG_BUF9I (0x00000200) +#define IFLAG_BUF8I (0x00000100) +#define IFLAG_BUF7I (0x00000080) +#define IFLAG_BUF6I (0x00000040) +#define IFLAG_BUF5I (0x00000020) +#define IFLAG_BUF4I (0x00000010) +#define IFLAG_BUF3I (0x00000008) +#define IFLAG_BUF2I (0x00000004) +#define IFLAG_BUF1I (0x00000002) +#define IFLAG_BUF0I (0x00000001) + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ +#define INTC0_EPORT INTC_IPRL_INT1 + +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_EDMA_00 (8) +#define INT0_LO_EDMA_01 (9) +#define INT0_LO_EDMA_02 (10) +#define INT0_LO_EDMA_03 (11) +#define INT0_LO_EDMA_04 (12) +#define INT0_LO_EDMA_05 (13) +#define INT0_LO_EDMA_06 (14) +#define INT0_LO_EDMA_07 (15) +#define INT0_LO_EDMA_08 (16) +#define INT0_LO_EDMA_09 (17) +#define INT0_LO_EDMA_10 (18) +#define INT0_LO_EDMA_11 (19) +#define INT0_LO_EDMA_12 (20) +#define INT0_LO_EDMA_13 (21) +#define INT0_LO_EDMA_14 (22) +#define INT0_LO_EDMA_15 (23) +#define INT0_LO_EDMA_ERR (24) +#define INT0_LO_SCM (25) +#define INT0_LO_UART0 (26) +#define INT0_LO_UART1 (27) +#define INT0_LO_UART2 (28) +#define INT0_LO_RSVD1 (29) +#define INT0_LO_I2C (30) +#define INT0_LO_QSPI (31) +#define INT0_HI_DTMR0 (32) +#define INT0_HI_DTMR1 (33) +#define INT0_HI_DTMR2 (34) +#define INT0_HI_DTMR3 (35) +#define INT0_HI_FEC_TXF (36) +#define INT0_HI_FEC_TXB (37) +#define INT0_HI_FEC_UN (38) +#define INT0_HI_FEC_RL (39) +#define INT0_HI_FEC_RXF (40) +#define INT0_HI_FEC_RXB (41) +#define INT0_HI_FEC_MII (42) +#define INT0_HI_FEC_LC (43) +#define INT0_HI_FEC_HBERR (44) +#define INT0_HI_FEC_GRA (45) +#define INT0_HI_FEC_EBERR (46) +#define INT0_HI_FEC_BABT (47) +#define INT0_HI_FEC_BABR (48) +/* 49 - 61 Reserved */ +#define INT0_HI_SCM (62) + +/*#define INT1_HI_ */ + +/* Bit definitions and macros for INTC_IPRH */ +#define INTC_IPRH_INT63 (0x80000000) +#define INTC_IPRH_INT62 (0x40000000) +#define INTC_IPRH_INT61 (0x20000000) +#define INTC_IPRH_INT60 (0x10000000) +#define INTC_IPRH_INT59 (0x08000000) +#define INTC_IPRH_INT58 (0x04000000) +#define INTC_IPRH_INT57 (0x02000000) +#define INTC_IPRH_INT56 (0x01000000) +#define INTC_IPRH_INT55 (0x00800000) +#define INTC_IPRH_INT54 (0x00400000) +#define INTC_IPRH_INT53 (0x00200000) +#define INTC_IPRH_INT52 (0x00100000) +#define INTC_IPRH_INT51 (0x00080000) +#define INTC_IPRH_INT50 (0x00040000) +#define INTC_IPRH_INT49 (0x00020000) +#define INTC_IPRH_INT48 (0x00010000) +#define INTC_IPRH_INT47 (0x00008000) +#define INTC_IPRH_INT46 (0x00004000) +#define INTC_IPRH_INT45 (0x00002000) +#define INTC_IPRH_INT44 (0x00001000) +#define INTC_IPRH_INT43 (0x00000800) +#define INTC_IPRH_INT42 (0x00000400) +#define INTC_IPRH_INT41 (0x00000200) +#define INTC_IPRH_INT40 (0x00000100) +#define INTC_IPRH_INT39 (0x00000080) +#define INTC_IPRH_INT38 (0x00000040) +#define INTC_IPRH_INT37 (0x00000020) +#define INTC_IPRH_INT36 (0x00000010) +#define INTC_IPRH_INT35 (0x00000008) +#define INTC_IPRH_INT34 (0x00000004) +#define INTC_IPRH_INT33 (0x00000002) +#define INTC_IPRH_INT32 (0x00000001) + +/* Bit definitions and macros for INTC_IPRL */ +#define INTC_IPRL_INT31 (0x80000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT0 (0x00000001) + +/* Bit definitions and macros for INTC_ICONFIG */ +#define INTC_ICFG_ELVLPRI7 (0x8000) +#define INTC_ICFG_ELVLPRI6 (0x4000) +#define INTC_ICFG_ELVLPRI5 (0x2000) +#define INTC_ICFG_ELVLPRI4 (0x1000) +#define INTC_ICFG_ELVLPRI3 (0x0800) +#define INTC_ICFG_ELVLPRI2 (0x0400) +#define INTC_ICFG_ELVLPRI1 (0x0200) +#define INTC_ICFG_EMASK (0x0020) + +/* Bit definitions and macros for INTC_SIMR */ +#define INTC_SIMR_SALL (0x40) +#define INTC_SIMR_SIMR(x) ((x)&0x3F) + +/* Bit definitions and macros for INTC_CIMR */ +#define INTC_CIMR_CALL (0x40) +#define INTC_CIMR_CIMR(x) ((x)&0x3F) + +/* Bit definitions and macros for INTC_CLMASK */ +#define INTC_CLMASK_CLMASK(x) ((x)&0x0F) + +/* Bit definitions and macros for INTC_SLMASK */ +#define INTC_SLMASK_SLMASK(x) ((x)&0x0F) + +/* Bit definitions and macros for INTC_ICR */ +#define INTC_ICR_IL(x) ((x)&0x07) + +/********************************************************************* +* I2C Module (I2C) +*********************************************************************/ +/* Bit definitions and macros for I2C_AR */ +#define I2C_AR_ADR(x) (((x)&0x7F)<<1) + +/* Bit definitions and macros for I2C_FDR */ +#define I2C_FDR_IC(x) ((x)&0x3F) + +/* Bit definitions and macros for I2C_CR */ +#define I2C_CR_IEN (0x80) +#define I2C_CR_IIEN (0x40) +#define I2C_CR_MSTA (0x20) +#define I2C_CR_MTX (0x10) +#define I2C_CR_TXAK (0x08) +#define I2C_CR_RSTA (0x04) + +/* Bit definitions and macros for I2C_SR */ +#define I2C_SR_ICF (0x80) +#define I2C_SR_IAAS (0x40) +#define I2C_SR_IBB (0x20) +#define I2C_SR_IAL (0x10) +#define I2C_SR_SRW (0x04) +#define I2C_SR_IIF (0x02) +#define I2C_SR_RXAK (0x01) + +/* Bit definitions and macros for I2C_ICR */ +#define I2C_ICR_BNBE (0x08) +#define I2C_ICR_TE (0x04) +#define I2C_ICR_RE (0x02) +#define I2C_ICR_IE (0x01) + +/********************************************************************* +* Queued Serial Peripheral Interface (QSPI) +*********************************************************************/ +/* Bit definitions and macros for QSPI_QMR */ +#define QSPI_QMR_MSTR (0x8000) +#define QSPI_QMR_DOHIE (0x4000) +#define QSPI_QMR_BITS(x) (((x)&0x000F)<<10) +#define QSPI_QMR_CPOL (0x0200) +#define QSPI_QMR_CPHA (0x0100) +#define QSPI_QMR_BAUD(x) ((x)&0x00FF) + +/* Bit definitions and macros for QSPI_QDLYR */ +#define QSPI_QDLYR_SPE (0x8000) +#define QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) +#define QSPI_QDLYR_DTL(x) ((x)&0x00FF) + +/* Bit definitions and macros for QSPI_QWR */ +#define QSPI_QWR_NEWQP(x) ((x)&0x000F) +#define QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) +#define QSPI_QWR_CSIV (0x1000) +#define QSPI_QWR_WRTO (0x2000) +#define QSPI_QWR_WREN (0x4000) +#define QSPI_QWR_HALT (0x8000) + +/* Bit definitions and macros for QSPI_QIR */ +#define QSPI_QIR_WCEFB (0x8000) +#define QSPI_QIR_ABRTB (0x4000) +#define QSPI_QIR_ABRTL (0x1000) +#define QSPI_QIR_WCEFE (0x0800) +#define QSPI_QIR_ABRTE (0x0400) +#define QSPI_QIR_SPIFE (0x0100) +#define QSPI_QIR_WCEF (0x0008) +#define QSPI_QIR_ABRT (0x0004) +#define QSPI_QIR_SPIF (0x0001) + +/* Bit definitions and macros for QSPI_QAR */ +#define QSPI_QAR_ADDR(x) ((x)&0x003F) +#define QSPI_QAR_TRANS (0x0000) +#define QSPI_QAR_RECV (0x0010) +#define QSPI_QAR_CMD (0x0020) + +/* Bit definitions and macros for QSPI_QDR */ +#define QSPI_QDR_CONT (0x8000) +#define QSPI_QDR_BITSE (0x4000) +#define QSPI_QDR_DT (0x2000) +#define QSPI_QDR_DSCK (0x1000) +#define QSPI_QDR_QSPI_CS3 (0x0800) +#define QSPI_QDR_QSPI_CS2 (0x0400) +#define QSPI_QDR_QSPI_CS1 (0x0200) +#define QSPI_QDR_QSPI_CS0 (0x0100) + +/********************************************************************* +* Pulse Width Modulation (PWM) +*********************************************************************/ +/* Bit definitions and macros for PWM_E */ +#define PWM_EN_PWME7 (0x80) +#define PWM_EN_PWME5 (0x20) +#define PWM_EN_PWME3 (0x08) +#define PWM_EN_PWME1 (0x02) + +/* Bit definitions and macros for PWM_POL */ +#define PWM_POL_PPOL7 (0x80) +#define PWM_POL_PPOL5 (0x20) +#define PWM_POL_PPOL3 (0x08) +#define PWM_POL_PPOL1 (0x02) + +/* Bit definitions and macros for PWM_CLK */ +#define PWM_CLK_PCLK7 (0x80) +#define PWM_CLK_PCLK5 (0x20) +#define PWM_CLK_PCLK3 (0x08) +#define PWM_CLK_PCLK1 (0x02) + +/* Bit definitions and macros for PWM_PRCLK */ +#define PWM_PRCLK_PCKB(x) (((x)&0x07)<<4) +#define PWM_PRCLK_PCKA(x) ((x)&0x07) + +/* Bit definitions and macros for PWM_CAE */ +#define PWM_CAE_CAE7 (0x80) +#define PWM_CAE_CAE5 (0x20) +#define PWM_CAE_CAE3 (0x08) +#define PWM_CAE_CAE1 (0x02) + +/* Bit definitions and macros for PWM_CTL */ +#define PWM_CTL_CON67 (0x80) +#define PWM_CTL_CON45 (0x40) +#define PWM_CTL_CON23 (0x20) +#define PWM_CTL_CON01 (0x10) +#define PWM_CTL_PSWAR (0x08) +#define PWM_CTL_PFRZ (0x04) + +/* Bit definitions and macros for PWM_SDN */ +#define PWM_SDN_IF (0x80) +#define PWM_SDN_IE (0x40) +#define PWM_SDN_RESTART (0x20) +#define PWM_SDN_LVL (0x10) +#define PWM_SDN_PWM7IN (0x04) +#define PWM_SDN_PWM7IL (0x02) +#define PWM_SDN_SDNEN (0x01) + +/********************************************************************* +* Watchdog Timer Modules (WTM) +*********************************************************************/ +/* Bit definitions and macros for WTM_WCR */ +#define WTM_WCR_WAIT (0x0008) +#define WTM_WCR_DOZE (0x0004) +#define WTM_WCR_HALTED (0x0002) +#define WTM_WCR_EN (0x0001) + +/********************************************************************* +* Chip Configuration Module (CCM) +*********************************************************************/ +/* Bit definitions and macros for CCM_CCR */ +#define CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001) +#define CCM_CCR_LIMP (0x0041) +#define CCM_CCR_LOAD (0x0021) +#define CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001) +#define CCM_CCR_OSC_MODE (0x0005) +#define CCM_CCR_PLL_MODE (0x0003) +#define CCM_CCR_RESERVED (0x0001) + +/* Bit definitions and macros for CCM_RCON */ +#define CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001) +#define CCM_RCON_LIMP (0x0041) +#define CCM_RCON_LOAD (0x0021) +#define CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001) +#define CCM_RCON_OSC_MODE (0x0005) +#define CCM_RCON_PLL_MODE (0x0003) +#define CCM_RCON_RESERVED (0x0001) + +/* Bit definitions and macros for CCM_CIR */ +#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) +#define CCM_CIR_PRN(x) ((x)&0x003F) + +/* Bit definitions and macros for CCM_MISCCR */ +#define CCM_MISCCR_PLL_LOCK (0x2000) +#define CCM_MISCCR_LIMP (0x1000) +#define CCM_MISCCR_LCD_CHEN (0x0100) +#define CCM_MISCCR_SSI_PUE (0x0080) +#define CCM_MISCCR_SSI_PUS (0x0040) +#define CCM_MISCCR_TIM_DMA (0x0020) +#define CCM_MISCCR_SSI_SRC (0x0010) +#define CCM_MISCCR_USBDIV (0x0002) +#define CCM_MISCCR_USBSRC (0x0001) + +/* Bit definitions and macros for CCM_CDR */ +#define CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) +#define CCM_CDR_SSIDIV(x) ((x)&0x000F) + +/* Bit definitions and macros for CCM_UHCSR */ +#define CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14) +#define CCM_UHCSR_WKUP (0x0004) +#define CCM_UHCSR_UHMIE (0x0002) +#define CCM_UHCSR_XPDE (0x0001) + +/* Bit definitions and macros for CCM_UOCSR */ +#define CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14) +#define CCM_UOCSR_DPPD (0x2000) +#define CCM_UOCSR_DMPD (0x1000) +#define CCM_UOCSR_DRV_VBUS (0x0800) +#define CCM_UOCSR_CRG_VBUS (0x0400) +#define CCM_UOCSR_DCR_VBUS (0x0200) +#define CCM_UOCSR_DPPU (0x0100) +#define CCM_UOCSR_AVLD (0x0080) +#define CCM_UOCSR_BVLD (0x0040) +#define CCM_UOCSR_VVLD (0x0020) +#define CCM_UOCSR_SEND (0x0010) +#define CCM_UOCSR_PWRFLT (0x0008) +#define CCM_UOCSR_WKUP (0x0004) +#define CCM_UOCSR_UOMIE (0x0002) +#define CCM_UOCSR_XPDE (0x0001) + +/* not done yet */ +/********************************************************************* +* General Purpose I/O (GPIO) +*********************************************************************/ +/* Bit definitions and macros for GPIO_PODR_FECH_L */ +#define GPIO_PODR_FECH_L7 (0x80) +#define GPIO_PODR_FECH_L6 (0x40) +#define GPIO_PODR_FECH_L5 (0x20) +#define GPIO_PODR_FECH_L4 (0x10) +#define GPIO_PODR_FECH_L3 (0x08) +#define GPIO_PODR_FECH_L2 (0x04) +#define GPIO_PODR_FECH_L1 (0x02) +#define GPIO_PODR_FECH_L0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_SSI */ +#define GPIO_PODR_SSI_4 (0x10) +#define GPIO_PODR_SSI_3 (0x08) +#define GPIO_PODR_SSI_2 (0x04) +#define GPIO_PODR_SSI_1 (0x02) +#define GPIO_PODR_SSI_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_BUSCTL */ +#define GPIO_PODR_BUSCTL_3 (0x08) +#define GPIO_PODR_BUSCTL_2 (0x04) +#define GPIO_PODR_BUSCTL_1 (0x02) +#define GPIO_PODR_BUSCTL_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_BE */ +#define GPIO_PODR_BE_3 (0x08) +#define GPIO_PODR_BE_2 (0x04) +#define GPIO_PODR_BE_1 (0x02) +#define GPIO_PODR_BE_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_CS */ +#define GPIO_PODR_CS_5 (0x20) +#define GPIO_PODR_CS_4 (0x10) +#define GPIO_PODR_CS_3 (0x08) +#define GPIO_PODR_CS_2 (0x04) +#define GPIO_PODR_CS_1 (0x02) + +/* Bit definitions and macros for GPIO_PODR_PWM */ +#define GPIO_PODR_PWM_5 (0x20) +#define GPIO_PODR_PWM_4 (0x10) +#define GPIO_PODR_PWM_3 (0x08) +#define GPIO_PODR_PWM_2 (0x04) + +/* Bit definitions and macros for GPIO_PODR_FECI2C */ +#define GPIO_PODR_FECI2C_3 (0x08) +#define GPIO_PODR_FECI2C_2 (0x04) +#define GPIO_PODR_FECI2C_1 (0x02) +#define GPIO_PODR_FECI2C_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_UART */ +#define GPIO_PODR_UART_7 (0x80) +#define GPIO_PODR_UART_6 (0x40) +#define GPIO_PODR_UART_5 (0x20) +#define GPIO_PODR_UART_4 (0x10) +#define GPIO_PODR_UART_3 (0x08) +#define GPIO_PODR_UART_2 (0x04) +#define GPIO_PODR_UART_1 (0x02) +#define GPIO_PODR_UART_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_QSPI */ +#define GPIO_PODR_QSPI_5 (0x20) +#define GPIO_PODR_QSPI_4 (0x10) +#define GPIO_PODR_QSPI_3 (0x08) +#define GPIO_PODR_QSPI_2 (0x04) +#define GPIO_PODR_QSPI_1 (0x02) +#define GPIO_PODR_QSPI_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_TIMER */ +#define GPIO_PODR_TIMER_3 (0x08) +#define GPIO_PODR_TIMER_2 (0x04) +#define GPIO_PODR_TIMER_1 (0x02) +#define GPIO_PODR_TIMER_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_LCDDATAH */ +#define GPIO_PODR_LCDDATAH_1 (0x02) +#define GPIO_PODR_LCDDATAH_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_LCDDATAM */ +#define GPIO_PODR_LCDDATAM_7 (0x80) +#define GPIO_PODR_LCDDATAM_6 (0x40) +#define GPIO_PODR_LCDDATAM_5 (0x20) +#define GPIO_PODR_LCDDATAM_4 (0x10) +#define GPIO_PODR_LCDDATAM_3 (0x08) +#define GPIO_PODR_LCDDATAM_2 (0x04) +#define GPIO_PODR_LCDDATAM_1 (0x02) +#define GPIO_PODR_LCDDATAM_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_LCDDATAL */ +#define GPIO_PODR_LCDDATAL_7 (0x80) +#define GPIO_PODR_LCDDATAL_6 (0x40) +#define GPIO_PODR_LCDDATAL_5 (0x20) +#define GPIO_PODR_LCDDATAL_4 (0x10) +#define GPIO_PODR_LCDDATAL_3 (0x08) +#define GPIO_PODR_LCDDATAL_2 (0x04) +#define GPIO_PODR_LCDDATAL_1 (0x02) +#define GPIO_PODR_LCDDATAL_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_LCDCTLH */ +#define GPIO_PODR_LCDCTLH_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_LCDCTLL */ +#define GPIO_PODR_LCDCTLL_7 (0x80) +#define GPIO_PODR_LCDCTLL_6 (0x40) +#define GPIO_PODR_LCDCTLL_5 (0x20) +#define GPIO_PODR_LCDCTLL_4 (0x10) +#define GPIO_PODR_LCDCTLL_3 (0x08) +#define GPIO_PODR_LCDCTLL_2 (0x04) +#define GPIO_PODR_LCDCTLL_1 (0x02) +#define GPIO_PODR_LCDCTLL_0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_FECH */ +#define GPIO_PDDR_FECH_L7 (0x80) +#define GPIO_PDDR_FECH_L6 (0x40) +#define GPIO_PDDR_FECH_L5 (0x20) +#define GPIO_PDDR_FECH_L4 (0x10) +#define GPIO_PDDR_FECH_L3 (0x08) +#define GPIO_PDDR_FECH_L2 (0x04) +#define GPIO_PDDR_FECH_L1 (0x02) +#define GPIO_PDDR_FECH_L0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_SSI */ +#define GPIO_PDDR_SSI_4 (0x10) +#define GPIO_PDDR_SSI_3 (0x08) +#define GPIO_PDDR_SSI_2 (0x04) +#define GPIO_PDDR_SSI_1 (0x02) +#define GPIO_PDDR_SSI_0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_BUSCTL */ +#define GPIO_PDDR_BUSCTL_3 (0x08) +#define GPIO_PDDR_BUSCTL_2 (0x04) +#define GPIO_PDDR_BUSCTL_1 (0x02) +#define GPIO_PDDR_BUSCTL_0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_BE */ +#define GPIO_PDDR_BE_3 (0x08) +#define GPIO_PDDR_BE_2 (0x04) +#define GPIO_PDDR_BE_1 (0x02) +#define GPIO_PDDR_BE_0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_CS */ +#define GPIO_PDDR_CS_1 (0x02) +#define GPIO_PDDR_CS_2 (0x04) +#define GPIO_PDDR_CS_3 (0x08) +#define GPIO_PDDR_CS_4 (0x10) +#define GPIO_PDDR_CS_5 (0x20) + +/* Bit definitions and macros for GPIO_PDDR_PWM */ +#define GPIO_PDDR_PWM_2 (0x04) +#define GPIO_PDDR_PWM_3 (0x08) +#define GPIO_PDDR_PWM_4 (0x10) +#define GPIO_PDDR_PWM_5 (0x20) + +/* Bit definitions and macros for GPIO_PDDR_FECI2C */ +#define GPIO_PDDR_FECI2C_0 (0x01) +#define GPIO_PDDR_FECI2C_1 (0x02) +#define GPIO_PDDR_FECI2C_2 (0x04) +#define GPIO_PDDR_FECI2C_3 (0x08) + +/* Bit definitions and macros for GPIO_PDDR_UART */ +#define GPIO_PDDR_UART_0 (0x01) +#define GPIO_PDDR_UART_1 (0x02) +#define GPIO_PDDR_UART_2 (0x04) +#define GPIO_PDDR_UART_3 (0x08) +#define GPIO_PDDR_UART_4 (0x10) +#define GPIO_PDDR_UART_5 (0x20) +#define GPIO_PDDR_UART_6 (0x40) +#define GPIO_PDDR_UART_7 (0x80) + +/* Bit definitions and macros for GPIO_PDDR_QSPI */ +#define GPIO_PDDR_QSPI_0 (0x01) +#define GPIO_PDDR_QSPI_1 (0x02) +#define GPIO_PDDR_QSPI_2 (0x04) +#define GPIO_PDDR_QSPI_3 (0x08) +#define GPIO_PDDR_QSPI_4 (0x10) +#define GPIO_PDDR_QSPI_5 (0x20) + +/* Bit definitions and macros for GPIO_PDDR_TIMER */ +#define GPIO_PDDR_TIMER_0 (0x01) +#define GPIO_PDDR_TIMER_1 (0x02) +#define GPIO_PDDR_TIMER_2 (0x04) +#define GPIO_PDDR_TIMER_3 (0x08) + +/* Bit definitions and macros for GPIO_PDDR_LCDDATAH */ +#define GPIO_PDDR_LCDDATAH_0 (0x01) +#define GPIO_PDDR_LCDDATAH_1 (0x02) + +/* Bit definitions and macros for GPIO_PDDR_LCDDATAM */ +#define GPIO_PDDR_LCDDATAM_0 (0x01) +#define GPIO_PDDR_LCDDATAM_1 (0x02) +#define GPIO_PDDR_LCDDATAM_2 (0x04) +#define GPIO_PDDR_LCDDATAM_3 (0x08) +#define GPIO_PDDR_LCDDATAM_4 (0x10) +#define GPIO_PDDR_LCDDATAM_5 (0x20) +#define GPIO_PDDR_LCDDATAM_6 (0x40) +#define GPIO_PDDR_LCDDATAM_7 (0x80) + +/* Bit definitions and macros for GPIO_PDDR_LCDDATAL */ +#define GPIO_PDDR_LCDDATAL_0 (0x01) +#define GPIO_PDDR_LCDDATAL_1 (0x02) +#define GPIO_PDDR_LCDDATAL_2 (0x04) +#define GPIO_PDDR_LCDDATAL_3 (0x08) +#define GPIO_PDDR_LCDDATAL_4 (0x10) +#define GPIO_PDDR_LCDDATAL_5 (0x20) +#define GPIO_PDDR_LCDDATAL_6 (0x40) +#define GPIO_PDDR_LCDDATAL_7 (0x80) + +/* Bit definitions and macros for GPIO_PDDR_LCDCTLH */ +#define GPIO_PDDR_LCDCTLH_0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_LCDCTLL */ +#define GPIO_PDDR_LCDCTLL_0 (0x01) +#define GPIO_PDDR_LCDCTLL_1 (0x02) +#define GPIO_PDDR_LCDCTLL_2 (0x04) +#define GPIO_PDDR_LCDCTLL_3 (0x08) +#define GPIO_PDDR_LCDCTLL_4 (0x10) +#define GPIO_PDDR_LCDCTLL_5 (0x20) +#define GPIO_PDDR_LCDCTLL_6 (0x40) +#define GPIO_PDDR_LCDCTLL_7 (0x80) + +/* Bit definitions and macros for GPIO_PPDSDR_FECH */ +#define GPIO_PPDSDR_FECH_L0 (0x01) +#define GPIO_PPDSDR_FECH_L1 (0x02) +#define GPIO_PPDSDR_FECH_L2 (0x04) +#define GPIO_PPDSDR_FECH_L3 (0x08) +#define GPIO_PPDSDR_FECH_L4 (0x10) +#define GPIO_PPDSDR_FECH_L5 (0x20) +#define GPIO_PPDSDR_FECH_L6 (0x40) +#define GPIO_PPDSDR_FECH_L7 (0x80) + +/* Bit definitions and macros for GPIO_PPDSDR_SSI */ +#define GPIO_PPDSDR_SSI_0 (0x01) +#define GPIO_PPDSDR_SSI_1 (0x02) +#define GPIO_PPDSDR_SSI_2 (0x04) +#define GPIO_PPDSDR_SSI_3 (0x08) +#define GPIO_PPDSDR_SSI_4 (0x10) + +/* Bit definitions and macros for GPIO_PPDSDR_BUSCTL */ +#define GPIO_PPDSDR_BUSCTL_0 (0x01) +#define GPIO_PPDSDR_BUSCTL_1 (0x02) +#define GPIO_PPDSDR_BUSCTL_2 (0x04) +#define GPIO_PPDSDR_BUSCTL_3 (0x08) + +/* Bit definitions and macros for GPIO_PPDSDR_BE */ +#define GPIO_PPDSDR_BE_0 (0x01) +#define GPIO_PPDSDR_BE_1 (0x02) +#define GPIO_PPDSDR_BE_2 (0x04) +#define GPIO_PPDSDR_BE_3 (0x08) + +/* Bit definitions and macros for GPIO_PPDSDR_CS */ +#define GPIO_PPDSDR_CS_1 (0x02) +#define GPIO_PPDSDR_CS_2 (0x04) +#define GPIO_PPDSDR_CS_3 (0x08) +#define GPIO_PPDSDR_CS_4 (0x10) +#define GPIO_PPDSDR_CS_5 (0x20) + +/* Bit definitions and macros for GPIO_PPDSDR_PWM */ +#define GPIO_PPDSDR_PWM_2 (0x04) +#define GPIO_PPDSDR_PWM_3 (0x08) +#define GPIO_PPDSDR_PWM_4 (0x10) +#define GPIO_PPDSDR_PWM_5 (0x20) + +/* Bit definitions and macros for GPIO_PPDSDR_FECI2C */ +#define GPIO_PPDSDR_FECI2C_0 (0x01) +#define GPIO_PPDSDR_FECI2C_1 (0x02) +#define GPIO_PPDSDR_FECI2C_2 (0x04) +#define GPIO_PPDSDR_FECI2C_3 (0x08) + +/* Bit definitions and macros for GPIO_PPDSDR_UART */ +#define GPIO_PPDSDR_UART_0 (0x01) +#define GPIO_PPDSDR_UART_1 (0x02) +#define GPIO_PPDSDR_UART_2 (0x04) +#define GPIO_PPDSDR_UART_3 (0x08) +#define GPIO_PPDSDR_UART_4 (0x10) +#define GPIO_PPDSDR_UART_5 (0x20) +#define GPIO_PPDSDR_UART_6 (0x40) +#define GPIO_PPDSDR_UART_7 (0x80) + +/* Bit definitions and macros for GPIO_PPDSDR_QSPI */ +#define GPIO_PPDSDR_QSPI_0 (0x01) +#define GPIO_PPDSDR_QSPI_1 (0x02) +#define GPIO_PPDSDR_QSPI_2 (0x04) +#define GPIO_PPDSDR_QSPI_3 (0x08) +#define GPIO_PPDSDR_QSPI_4 (0x10) +#define GPIO_PPDSDR_QSPI_5 (0x20) + +/* Bit definitions and macros for GPIO_PPDSDR_TIMER */ +#define GPIO_PPDSDR_TIMER_0 (0x01) +#define GPIO_PPDSDR_TIMER_1 (0x02) +#define GPIO_PPDSDR_TIMER_2 (0x04) +#define GPIO_PPDSDR_TIMER_3 (0x08) + +/* Bit definitions and macros for GPIO_PPDSDR_LCDDATAH */ +#define GPIO_PPDSDR_LCDDATAH_0 (0x01) +#define GPIO_PPDSDR_LCDDATAH_1 (0x02) + +/* Bit definitions and macros for GPIO_PPDSDR_LCDDATAM */ +#define GPIO_PPDSDR_LCDDATAM_0 (0x01) +#define GPIO_PPDSDR_LCDDATAM_1 (0x02) +#define GPIO_PPDSDR_LCDDATAM_2 (0x04) +#define GPIO_PPDSDR_LCDDATAM_3 (0x08) +#define GPIO_PPDSDR_LCDDATAM_4 (0x10) +#define GPIO_PPDSDR_LCDDATAM_5 (0x20) +#define GPIO_PPDSDR_LCDDATAM_6 (0x40) +#define GPIO_PPDSDR_LCDDATAM_7 (0x80) + +/* Bit definitions and macros for GPIO_PPDSDR_LCDDATAL */ +#define GPIO_PPDSDR_LCDDATAL_0 (0x01) +#define GPIO_PPDSDR_LCDDATAL_1 (0x02) +#define GPIO_PPDSDR_LCDDATAL_2 (0x04) +#define GPIO_PPDSDR_LCDDATAL_3 (0x08) +#define GPIO_PPDSDR_LCDDATAL_4 (0x10) +#define GPIO_PPDSDR_LCDDATAL_5 (0x20) +#define GPIO_PPDSDR_LCDDATAL_6 (0x40) +#define GPIO_PPDSDR_LCDDATAL_7 (0x80) + +/* Bit definitions and macros for GPIO_PPDSDR_LCDCTLH */ +#define GPIO_PPDSDR_LCDCTLH_0 (0x01) + +/* Bit definitions and macros for GPIO_PPDSDR_LCDCTLL */ +#define GPIO_PPDSDR_LCDCTLL_0 (0x01) +#define GPIO_PPDSDR_LCDCTLL_1 (0x02) +#define GPIO_PPDSDR_LCDCTLL_2 (0x04) +#define GPIO_PPDSDR_LCDCTLL_3 (0x08) +#define GPIO_PPDSDR_LCDCTLL_4 (0x10) +#define GPIO_PPDSDR_LCDCTLL_5 (0x20) +#define GPIO_PPDSDR_LCDCTLL_6 (0x40) +#define GPIO_PPDSDR_LCDCTLL_7 (0x80) + +/* Bit definitions and macros for GPIO_PCLRR_FECH */ +#define GPIO_PCLRR_FECH_L0 (0x01) +#define GPIO_PCLRR_FECH_L1 (0x02) +#define GPIO_PCLRR_FECH_L2 (0x04) +#define GPIO_PCLRR_FECH_L3 (0x08) +#define GPIO_PCLRR_FECH_L4 (0x10) +#define GPIO_PCLRR_FECH_L5 (0x20) +#define GPIO_PCLRR_FECH_L6 (0x40) +#define GPIO_PCLRR_FECH_L7 (0x80) + +/* Bit definitions and macros for GPIO_PCLRR_SSI */ +#define GPIO_PCLRR_SSI_0 (0x01) +#define GPIO_PCLRR_SSI_1 (0x02) +#define GPIO_PCLRR_SSI_2 (0x04) +#define GPIO_PCLRR_SSI_3 (0x08) +#define GPIO_PCLRR_SSI_4 (0x10) + +/* Bit definitions and macros for GPIO_PCLRR_BUSCTL */ +#define GPIO_PCLRR_BUSCTL_L0 (0x01) +#define GPIO_PCLRR_BUSCTL_L1 (0x02) +#define GPIO_PCLRR_BUSCTL_L2 (0x04) +#define GPIO_PCLRR_BUSCTL_L3 (0x08) + +/* Bit definitions and macros for GPIO_PCLRR_BE */ +#define GPIO_PCLRR_BE_0 (0x01) +#define GPIO_PCLRR_BE_1 (0x02) +#define GPIO_PCLRR_BE_2 (0x04) +#define GPIO_PCLRR_BE_3 (0x08) + +/* Bit definitions and macros for GPIO_PCLRR_CS */ +#define GPIO_PCLRR_CS_1 (0x02) +#define GPIO_PCLRR_CS_2 (0x04) +#define GPIO_PCLRR_CS_3 (0x08) +#define GPIO_PCLRR_CS_4 (0x10) +#define GPIO_PCLRR_CS_5 (0x20) + +/* Bit definitions and macros for GPIO_PCLRR_PWM */ +#define GPIO_PCLRR_PWM_2 (0x04) +#define GPIO_PCLRR_PWM_3 (0x08) +#define GPIO_PCLRR_PWM_4 (0x10) +#define GPIO_PCLRR_PWM_5 (0x20) + +/* Bit definitions and macros for GPIO_PCLRR_FECI2C */ +#define GPIO_PCLRR_FECI2C_0 (0x01) +#define GPIO_PCLRR_FECI2C_1 (0x02) +#define GPIO_PCLRR_FECI2C_2 (0x04) +#define GPIO_PCLRR_FECI2C_3 (0x08) + +/* Bit definitions and macros for GPIO_PCLRR_UART */ +#define GPIO_PCLRR_UART0 (0x01) +#define GPIO_PCLRR_UART1 (0x02) +#define GPIO_PCLRR_UART2 (0x04) +#define GPIO_PCLRR_UART3 (0x08) +#define GPIO_PCLRR_UART4 (0x10) +#define GPIO_PCLRR_UART5 (0x20) +#define GPIO_PCLRR_UART6 (0x40) +#define GPIO_PCLRR_UART7 (0x80) + +/* Bit definitions and macros for GPIO_PCLRR_QSPI */ +#define GPIO_PCLRR_QSPI0 (0x01) +#define GPIO_PCLRR_QSPI1 (0x02) +#define GPIO_PCLRR_QSPI2 (0x04) +#define GPIO_PCLRR_QSPI3 (0x08) +#define GPIO_PCLRR_QSPI4 (0x10) +#define GPIO_PCLRR_QSPI5 (0x20) + +/* Bit definitions and macros for GPIO_PCLRR_TIMER */ +#define GPIO_PCLRR_TIMER0 (0x01) +#define GPIO_PCLRR_TIMER1 (0x02) +#define GPIO_PCLRR_TIMER2 (0x04) +#define GPIO_PCLRR_TIMER3 (0x08) + +/* Bit definitions and macros for GPIO_PCLRR_LCDDATAH */ +#define GPIO_PCLRR_LCDDATAH0 (0x01) +#define GPIO_PCLRR_LCDDATAH1 (0x02) + +/* Bit definitions and macros for GPIO_PCLRR_LCDDATAM */ +#define GPIO_PCLRR_LCDDATAM0 (0x01) +#define GPIO_PCLRR_LCDDATAM1 (0x02) +#define GPIO_PCLRR_LCDDATAM2 (0x04) +#define GPIO_PCLRR_LCDDATAM3 (0x08) +#define GPIO_PCLRR_LCDDATAM4 (0x10) +#define GPIO_PCLRR_LCDDATAM5 (0x20) +#define GPIO_PCLRR_LCDDATAM6 (0x40) +#define GPIO_PCLRR_LCDDATAM7 (0x80) + +/* Bit definitions and macros for GPIO_PCLRR_LCDDATAL */ +#define GPIO_PCLRR_LCDDATAL0 (0x01) +#define GPIO_PCLRR_LCDDATAL1 (0x02) +#define GPIO_PCLRR_LCDDATAL2 (0x04) +#define GPIO_PCLRR_LCDDATAL3 (0x08) +#define GPIO_PCLRR_LCDDATAL4 (0x10) +#define GPIO_PCLRR_LCDDATAL5 (0x20) +#define GPIO_PCLRR_LCDDATAL6 (0x40) +#define GPIO_PCLRR_LCDDATAL7 (0x80) + +/* Bit definitions and macros for GPIO_PCLRR_LCDCTLH */ +#define GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01) + +/* Bit definitions and macros for GPIO_PCLRR_LCDCTLL */ +#define GPIO_PCLRR_LCDCTLL0 (0x01) +#define GPIO_PCLRR_LCDCTLL1 (0x02) +#define GPIO_PCLRR_LCDCTLL2 (0x04) +#define GPIO_PCLRR_LCDCTLL3 (0x08) +#define GPIO_PCLRR_LCDCTLL4 (0x10) +#define GPIO_PCLRR_LCDCTLL5 (0x20) +#define GPIO_PCLRR_LCDCTLL6 (0x40) +#define GPIO_PCLRR_LCDCTLL7 (0x80) + +/* Bit definitions and macros for GPIO_PAR_FEC */ +#define GPIO_PAR_FEC_MII(x) (((x)&0x03)<<0) +#define GPIO_PAR_FEC_7W(x) (((x)&0x03)<<2) +#define GPIO_PAR_FEC_7W_GPIO (0x00) +#define GPIO_PAR_FEC_7W_URTS1 (0x04) +#define GPIO_PAR_FEC_7W_FEC (0x0C) +#define GPIO_PAR_FEC_MII_GPIO (0x00) +#define GPIO_PAR_FEC_MII_UART (0x01) +#define GPIO_PAR_FEC_MII_FEC (0x03) + +/* Bit definitions and macros for GPIO_PAR_PWM */ +#define GPIO_PAR_PWM1(x) (((x)&0x03)<<0) +#define GPIO_PAR_PWM3(x) (((x)&0x03)<<2) +#define GPIO_PAR_PWM5 (0x10) +#define GPIO_PAR_PWM7 (0x20) + +/* Bit definitions and macros for GPIO_PAR_BUSCTL */ +#define GPIO_PAR_BUSCTL_TS(x) (((x)&0x03)<<3) +#define GPIO_PAR_BUSCTL_RWB (0x20) +#define GPIO_PAR_BUSCTL_TA (0x40) +#define GPIO_PAR_BUSCTL_OE (0x80) +#define GPIO_PAR_BUSCTL_OE_GPIO (0x00) +#define GPIO_PAR_BUSCTL_OE_OE (0x80) +#define GPIO_PAR_BUSCTL_TA_GPIO (0x00) +#define GPIO_PAR_BUSCTL_TA_TA (0x40) +#define GPIO_PAR_BUSCTL_RWB_GPIO (0x00) +#define GPIO_PAR_BUSCTL_RWB_RWB (0x20) +#define GPIO_PAR_BUSCTL_TS_GPIO (0x00) +#define GPIO_PAR_BUSCTL_TS_DACK0 (0x10) +#define GPIO_PAR_BUSCTL_TS_TS (0x18) + +/* Bit definitions and macros for GPIO_PAR_FECI2C */ +#define GPIO_PAR_FECI2C_SDA(x) (((x)&0x03)<<0) +#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x03)<<2) +#define GPIO_PAR_FECI2C_MDIO(x) (((x)&0x03)<<4) +#define GPIO_PAR_FECI2C_MDC(x) (((x)&0x03)<<6) +#define GPIO_PAR_FECI2C_MDC_GPIO (0x00) +#define GPIO_PAR_FECI2C_MDC_UTXD2 (0x40) +#define GPIO_PAR_FECI2C_MDC_SCL (0x80) +#define GPIO_PAR_FECI2C_MDC_EMDC (0xC0) +#define GPIO_PAR_FECI2C_MDIO_GPIO (0x00) +#define GPIO_PAR_FECI2C_MDIO_URXD2 (0x10) +#define GPIO_PAR_FECI2C_MDIO_SDA (0x20) +#define GPIO_PAR_FECI2C_MDIO_EMDIO (0x30) +#define GPIO_PAR_FECI2C_SCL_GPIO (0x00) +#define GPIO_PAR_FECI2C_SCL_UTXD2 (0x04) +#define GPIO_PAR_FECI2C_SCL_SCL (0x0C) +#define GPIO_PAR_FECI2C_SDA_GPIO (0x00) +#define GPIO_PAR_FECI2C_SDA_URXD2 (0x02) +#define GPIO_PAR_FECI2C_SDA_SDA (0x03) + +/* Bit definitions and macros for GPIO_PAR_BE */ +#define GPIO_PAR_BE0 (0x01) +#define GPIO_PAR_BE1 (0x02) +#define GPIO_PAR_BE2 (0x04) +#define GPIO_PAR_BE3 (0x08) + +/* Bit definitions and macros for GPIO_PAR_CS */ +#define GPIO_PAR_CS1 (0x02) +#define GPIO_PAR_CS2 (0x04) +#define GPIO_PAR_CS3 (0x08) +#define GPIO_PAR_CS4 (0x10) +#define GPIO_PAR_CS5 (0x20) +#define GPIO_PAR_CS1_GPIO (0x00) +#define GPIO_PAR_CS1_SDCS1 (0x01) +#define GPIO_PAR_CS1_CS1 (0x03) + +/* Bit definitions and macros for GPIO_PAR_SSI */ +#define GPIO_PAR_SSI_MCLK (0x0080) +#define GPIO_PAR_SSI_TXD(x) (((x)&0x0003)<<8) +#define GPIO_PAR_SSI_RXD(x) (((x)&0x0003)<<10) +#define GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<12) +#define GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<14) + +/* Bit definitions and macros for GPIO_PAR_UART */ +#define GPIO_PAR_UART_TXD0 (0x0001) +#define GPIO_PAR_UART_RXD0 (0x0002) +#define GPIO_PAR_UART_RTS0 (0x0004) +#define GPIO_PAR_UART_CTS0 (0x0008) +#define GPIO_PAR_UART_TXD1(x) (((x)&0x0003)<<4) +#define GPIO_PAR_UART_RXD1(x) (((x)&0x0003)<<6) +#define GPIO_PAR_UART_RTS1(x) (((x)&0x0003)<<8) +#define GPIO_PAR_UART_CTS1(x) (((x)&0x0003)<<10) +#define GPIO_PAR_UART_CTS1_GPIO (0x0000) +#define GPIO_PAR_UART_CTS1_SSI_BCLK (0x0800) +#define GPIO_PAR_UART_CTS1_ULPI_D7 (0x0400) +#define GPIO_PAR_UART_CTS1_UCTS1 (0x0C00) +#define GPIO_PAR_UART_RTS1_GPIO (0x0000) +#define GPIO_PAR_UART_RTS1_SSI_FS (0x0200) +#define GPIO_PAR_UART_RTS1_ULPI_D6 (0x0100) +#define GPIO_PAR_UART_RTS1_URTS1 (0x0300) +#define GPIO_PAR_UART_RXD1_GPIO (0x0000) +#define GPIO_PAR_UART_RXD1_SSI_RXD (0x0080) +#define GPIO_PAR_UART_RXD1_ULPI_D5 (0x0040) +#define GPIO_PAR_UART_RXD1_URXD1 (0x00C0) +#define GPIO_PAR_UART_TXD1_GPIO (0x0000) +#define GPIO_PAR_UART_TXD1_SSI_TXD (0x0020) +#define GPIO_PAR_UART_TXD1_ULPI_D4 (0x0010) +#define GPIO_PAR_UART_TXD1_UTXD1 (0x0030) + +/* Bit definitions and macros for GPIO_PAR_QSPI */ +#define GPIO_PAR_QSPI_SCK(x) (((x)&0x0003)<<4) +#define GPIO_PAR_QSPI_DOUT(x) (((x)&0x0003)<<6) +#define GPIO_PAR_QSPI_DIN(x) (((x)&0x0003)<<8) +#define GPIO_PAR_QSPI_PCS0(x) (((x)&0x0003)<<10) +#define GPIO_PAR_QSPI_PCS1(x) (((x)&0x0003)<<12) +#define GPIO_PAR_QSPI_PCS2(x) (((x)&0x0003)<<14) + +/* Bit definitions and macros for GPIO_PAR_TIMER */ +#define GPIO_PAR_TIN0(x) (((x)&0x03)<<0) +#define GPIO_PAR_TIN1(x) (((x)&0x03)<<2) +#define GPIO_PAR_TIN2(x) (((x)&0x03)<<4) +#define GPIO_PAR_TIN3(x) (((x)&0x03)<<6) +#define GPIO_PAR_TIN3_GPIO (0x00) +#define GPIO_PAR_TIN3_TOUT3 (0x80) +#define GPIO_PAR_TIN3_URXD2 (0x40) +#define GPIO_PAR_TIN3_TIN3 (0xC0) +#define GPIO_PAR_TIN2_GPIO (0x00) +#define GPIO_PAR_TIN2_TOUT2 (0x20) +#define GPIO_PAR_TIN2_UTXD2 (0x10) +#define GPIO_PAR_TIN2_TIN2 (0x30) +#define GPIO_PAR_TIN1_GPIO (0x00) +#define GPIO_PAR_TIN1_TOUT1 (0x08) +#define GPIO_PAR_TIN1_DACK1 (0x04) +#define GPIO_PAR_TIN1_TIN1 (0x0C) +#define GPIO_PAR_TIN0_GPIO (0x00) +#define GPIO_PAR_TIN0_TOUT0 (0x02) +#define GPIO_PAR_TIN0_DREQ0 (0x01) +#define GPIO_PAR_TIN0_TIN0 (0x03) + +/* Bit definitions and macros for GPIO_PAR_LCDDATA */ +#define GPIO_PAR_LCDDATA_LD7_0(x) ((x)&0x03) +#define GPIO_PAR_LCDDATA_LD15_8(x) (((x)&0x03)<<2) +#define GPIO_PAR_LCDDATA_LD16(x) (((x)&0x03)<<4) +#define GPIO_PAR_LCDDATA_LD17(x) (((x)&0x03)<<6) + +/* Bit definitions and macros for GPIO_PAR_LCDCTL */ +#define GPIO_PAR_LCDCTL_CLS (0x0001) +#define GPIO_PAR_LCDCTL_PS (0x0002) +#define GPIO_PAR_LCDCTL_REV (0x0004) +#define GPIO_PAR_LCDCTL_SPL_SPR (0x0008) +#define GPIO_PAR_LCDCTL_CONTRAST (0x0010) +#define GPIO_PAR_LCDCTL_LSCLK (0x0020) +#define GPIO_PAR_LCDCTL_LP_HSYNC (0x0040) +#define GPIO_PAR_LCDCTL_FLM_VSYNC (0x0080) +#define GPIO_PAR_LCDCTL_ACD_OE (0x0100) + +/* Bit definitions and macros for GPIO_PAR_IRQ */ +#define GPIO_PAR_IRQ1(x) (((x)&0x0003)<<4) +#define GPIO_PAR_IRQ2(x) (((x)&0x0003)<<6) +#define GPIO_PAR_IRQ4(x) (((x)&0x0003)<<8) +#define GPIO_PAR_IRQ5(x) (((x)&0x0003)<<10) +#define GPIO_PAR_IRQ6(x) (((x)&0x0003)<<12) + +/* Bit definitions and macros for GPIO_MSCR_FLEXBUS */ +#define GPIO_MSCR_FLEXBUS_ADDRCTL(x) ((x)&0x03) +#define GPIO_MSCR_FLEXBUS_DLOWER(x) (((x)&0x03)<<2) +#define GPIO_MSCR_FLEXBUS_DUPPER(x) (((x)&0x03)<<4) + +/* Bit definitions and macros for GPIO_MSCR_SDRAM */ +#define GPIO_MSCR_SDRAM_SDRAM(x) ((x)&0x03) +#define GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) +#define GPIO_MSCR_SDRAM_SDCLKB(x) (((x)&0x03)<<4) + +/* Bit definitions and macros for GPIO_DSCR_I2C */ +#define GPIO_DSCR_I2C_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_PWM */ +#define GPIO_DSCR_PWM_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_FEC */ +#define GPIO_DSCR_FEC_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_UART */ +#define GPIO_DSCR_UART0_DSE(x) ((x)&0x03) +#define GPIO_DSCR_UART1_DSE(x) (((x)&0x03)<<2) + +/* Bit definitions and macros for GPIO_DSCR_QSPI */ +#define GPIO_DSCR_QSPI_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_TIMER */ +#define GPIO_DSCR_TIMER_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_SSI */ +#define GPIO_DSCR_SSI_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_LCD */ +#define GPIO_DSCR_LCD_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_DEBUG */ +#define GPIO_DSCR_DEBUG_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_CLKRST */ +#define GPIO_DSCR_CLKRST_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_IRQ */ +#define GPIO_DSCR_IRQ_DSE(x) ((x)&0x03) + +/* not done yet */ +/********************************************************************* +* LCD Controller (LCDC) +*********************************************************************/ +/* Bit definitions and macros for LCDC_LSSAR */ +#define LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for LCDC_LSR */ +#define LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0) +#define LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20) + +/* Bit definitions and macros for LCDC_LVPWR */ +#define LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0) + +/* Bit definitions and macros for LCDC_LCPR */ +#define LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0) +#define LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16) +#define LCDC_LCPR_OP (0x10000000) +#define LCDC_LCPR_CC(x) (((x)&0x00000003)<<30) +#define LCDC_LCPR_CC_TRANSPARENT (0x00000000) +#define LCDC_LCPR_CC_OR (0x40000000) +#define LCDC_LCPR_CC_XOR (0x80000000) +#define LCDC_LCPR_CC_AND (0xC0000000) +#define LCDC_LCPR_OP_ON (0x10000000) +#define LCDC_LCPR_OP_OFF (0x00000000) + +/* Bit definitions and macros for LCDC_LCWHBR */ +#define LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0) +#define LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16) +#define LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24) +#define LCDC_LCWHBR_BK_EN (0x80000000) +#define LCDC_LCWHBR_BK_EN_ON (0x80000000) +#define LCDC_LCWHBR_BK_EN_OFF (0x00000000) + +/* Bit definitions and macros for LCDC_LCCMR */ +#define LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0) +#define LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6) +#define LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12) + +/* Bit definitions and macros for LCDC_LPCR */ +#define LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0) +#define LCDC_LPCR_SHARP (0x00000040) +#define LCDC_LPCR_SCLKSEL (0x00000080) +#define LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8) +#define LCDC_LPCR_ACDSEL (0x00008000) +#define LCDC_LPCR_REV_VS (0x00010000) +#define LCDC_LPCR_SWAP_SEL (0x00020000) +#define LCDC_LPCR_ENDSEL (0x00040000) +#define LCDC_LPCR_SCLKIDLE (0x00080000) +#define LCDC_LPCR_OEPOL (0x00100000) +#define LCDC_LPCR_CLKPOL (0x00200000) +#define LCDC_LPCR_LPPOL (0x00400000) +#define LCDC_LPCR_FLM (0x00800000) +#define LCDC_LPCR_PIXPOL (0x01000000) +#define LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25) +#define LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28) +#define LCDC_LPCR_COLOR (0x40000000) +#define LCDC_LPCR_TFT (0x80000000) +#define LCDC_LPCR_MODE_MONOCHROME (0x00000000) +#define LCDC_LPCR_MODE_CSTN (0x40000000) +#define LCDC_LPCR_MODE_TFT (0xC0000000) +#define LCDC_LPCR_PBSIZ_1 (0x00000000) +#define LCDC_LPCR_PBSIZ_2 (0x10000000) +#define LCDC_LPCR_PBSIZ_4 (0x20000000) +#define LCDC_LPCR_PBSIZ_8 (0x30000000) +#define LCDC_LPCR_BPIX_1bpp (0x00000000) +#define LCDC_LPCR_BPIX_2bpp (0x02000000) +#define LCDC_LPCR_BPIX_4bpp (0x04000000) +#define LCDC_LPCR_BPIX_8bpp (0x06000000) +#define LCDC_LPCR_BPIX_12bpp (0x08000000) +#define LCDC_LPCR_BPIX_16bpp (0x0A000000) +#define LCDC_LPCR_BPIX_18bpp (0x0C000000) + +#define LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30) + +/* Bit definitions and macros for LCDC_LHCR */ +#define LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0) +#define LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8) +#define LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26) + +/* Bit definitions and macros for LCDC_LVCR */ +#define LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0) +#define LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8) +#define LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26) + +/* Bit definitions and macros for LCDC_LPOR */ +#define LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0) + +/* Bit definitions and macros for LCDC_LPCCR */ +#define LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0) +#define LCDC_LPCCR_CC_EN (0x00000100) +#define LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9) +#define LCDC_LPCCR_LDMSK (0x00008000) +#define LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16) +#define LCDC_LPCCR_SCR_LINEPULSE (0x00000000) +#define LCDC_LPCCR_SCR_PIXELCLK (0x00002000) +#define LCDC_LPCCR_SCR_LCDCLOCK (0x00004000) + +/* Bit definitions and macros for LCDC_LDCR */ +#define LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0) +#define LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16) +#define LCDC_LDCR_BURST (0x80000000) + +/* Bit definitions and macros for LCDC_LRMCR */ +#define LCDC_LRMCR_SEL_REF (0x00000001) + +/* Bit definitions and macros for LCDC_LICR */ +#define LCDC_LICR_INTCON (0x00000001) +#define LCDC_LICR_INTSYN (0x00000004) +#define LCDC_LICR_GW_INT_CON (0x00000010) + +/* Bit definitions and macros for LCDC_LIER */ +#define LCDC_LIER_BOF_EN (0x00000001) +#define LCDC_LIER_EOF_EN (0x00000002) +#define LCDC_LIER_ERR_RES_EN (0x00000004) +#define LCDC_LIER_UDR_ERR_EN (0x00000008) +#define LCDC_LIER_GW_BOF_EN (0x00000010) +#define LCDC_LIER_GW_EOF_EN (0x00000020) +#define LCDC_LIER_GW_ERR_RES_EN (0x00000040) +#define LCDC_LIER_GW_UDR_ERR_EN (0x00000080) + +/* Bit definitions and macros for LCDC_LISR */ +#define LCDC_LISR_BOF (0x00000001) +#define LCDC_LISR_EOF (0x00000002) +#define LCDC_LISR_ERR_RES (0x00000004) +#define LCDC_LISR_UDR_ERR (0x00000008) +#define LCDC_LISR_GW_BOF (0x00000010) +#define LCDC_LISR_GW_EOF (0x00000020) +#define LCDC_LISR_GW_ERR_RES (0x00000040) +#define LCDC_LISR_GW_UDR_ERR (0x00000080) + +/* Bit definitions and macros for LCDC_LGWSAR */ +#define LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for LCDC_LGWSR */ +#define LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0) +#define LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20) + +/* Bit definitions and macros for LCDC_LGWVPWR */ +#define LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0) + +/* Bit definitions and macros for LCDC_LGWPOR */ +#define LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0) + +/* Bit definitions and macros for LCDC_LGWPR */ +#define LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0) +#define LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16) + +/* Bit definitions and macros for LCDC_LGWCR */ +#define LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0) +#define LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6) +#define LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12) +#define LCDC_LGWCR_GW_RVS (0x00200000) +#define LCDC_LGWCR_GWE (0x00400000) +#define LCDC_LGWCR_GWCKE (0x00800000) +#define LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24) + +/* Bit definitions and macros for LCDC_LGWDCR */ +#define LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0) +#define LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16) +#define LCDC_LGWDCR_GWBT (0x80000000) + +/* Bit definitions and macros for LCDC_BPLUT_BASE */ +#define LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) + +/* Bit definitions and macros for LCDC_GWLUT_BASE */ +#define LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) + +/* not done yet */ +/********************************************************************* +* USB Controller (USB) +*********************************************************************/ +/* Bit definitions and macros for USB_HCSPARAMS */ +#define USB_HCSPARAMS_N_PORTS(x) ((x)&0x0000000F) +#define USB_HCSPARAMS_PPC (0x00000010) +#define USB_HCSPARAMS_N_PCC(x) (((x)&0x0000000F)<<8) +#define USB_HCSPARAMS_N_CC(x) (((x)&0x0000000F)<<12) +#define USB_HCSPARAMS_PI (0x00010000) +#define USB_HCSPARAMS_N_PTT(x) (((x)&0x0000000F)<<20) +#define USB_HCSPARAMS_N_TT(x) (((x)&0x0000000F)<<24) + +/* Bit definitions and macros for USB_HCCPARAMS */ +#define USB_HCCPARAMS_ADC (0x00000001) +#define USB_HCCPARAMS_PFL (0x00000002) +#define USB_HCCPARAMS_ASP (0x00000004) +#define USB_HCCPARAMS_IST(x) (((x)&0x0000000F)<<4) +#define USB_HCCPARAMS_EECP(x) (((x)&0x000000FF)<<8) + +/* Bit definitions and macros for USB_DCIVERSION */ +#define USB_DCIVERSION_DCIVERSION(x) (((x)&0xFFFF)<<0) + +/* Bit definitions and macros for USB_DCCPARAMS */ +#define USB_DCCPARAMS_DEN(x) (((x)&0x0000001F)<<0) +#define USB_DCCPARAMS_DC (0x00000080) +#define USB_DCCPARAMS_HC (0x00000100) + +/* Bit definitions and macros for USB_USBCMD */ +#define USB_USBCMD_RS (0x00000001) +#define USB_USBCMD_RST (0x00000002) +#define USB_USBCMD_FS0 (0x00000004) +#define USB_USBCMD_FS1 (0x00000008) +#define USB_USBCMD_PSE (0x00000010) +#define USB_USBCMD_ASE (0x00000020) +#define USB_USBCMD_IAA (0x00000040) +#define USB_USBCMD_LR (0x00000080) +#define USB_USBCMD_ASP(x) (((x)&0x00000003)<<8) +#define USB_USBCMD_ASPE (0x00000800) +#define USB_USBCMD_SUTW (0x00002000) +#define USB_USBCMD_ATDTW (0x00004000) +#define USB_USBCMD_FS2 (0x00008000) +#define USB_USBCMD_ITC(x) (((x)&0x000000FF)<<16) +#define USB_USBCMD_ITC_IMM (0x00000000) +#define USB_USBCMD_ITC_1 (0x00010000) +#define USB_USBCMD_ITC_2 (0x00020000) +#define USB_USBCMD_ITC_4 (0x00040000) +#define USB_USBCMD_ITC_8 (0x00080000) +#define USB_USBCMD_ITC_16 (0x00100000) +#define USB_USBCMD_ITC_32 (0x00200000) +#define USB_USBCMD_ITC_40 (0x00400000) +#define USB_USBCMD_FS_1024 (0x00000000) +#define USB_USBCMD_FS_512 (0x00000004) +#define USB_USBCMD_FS_256 (0x00000008) +#define USB_USBCMD_FS_128 (0x0000000C) +#define USB_USBCMD_FS_64 (0x00008000) +#define USB_USBCMD_FS_32 (0x00008004) +#define USB_USBCMD_FS_16 (0x00008008) +#define USB_USBCMD_FS_8 (0x0000800C) + +/* Bit definitions and macros for USB_USBSTS */ +#define USB_USBSTS_UI (0x00000001) +#define USB_USBSTS_UEI (0x00000002) +#define USB_USBSTS_PCI (0x00000004) +#define USB_USBSTS_FRI (0x00000008) +#define USB_USBSTS_SEI (0x00000010) +#define USB_USBSTS_AAI (0x00000020) +#define USB_USBSTS_URI (0x00000040) +#define USB_USBSTS_SRI (0x00000080) +#define USB_USBSTS_SLI (0x00000100) +#define USB_USBSTS_HCH (0x00001000) +#define USB_USBSTS_RCL (0x00002000) +#define USB_USBSTS_PS (0x00004000) +#define USB_USBSTS_AS (0x00008000) + +/* Bit definitions and macros for USB_USBINTR */ +#define USB_USBINTR_UE (0x00000001) +#define USB_USBINTR_UEE (0x00000002) +#define USB_USBINTR_PCE (0x00000004) +#define USB_USBINTR_FRE (0x00000008) +#define USB_USBINTR_SEE (0x00000010) +#define USB_USBINTR_AAE (0x00000020) +#define USB_USBINTR_URE (0x00000040) +#define USB_USBINTR_SRE (0x00000080) +#define USB_USBINTR_SLE (0x00000100) + +/* Bit definitions and macros for USB_FRINDEX */ +#define USB_FRINDEX_FRINDEX(x) (((x)&0x00003FFF)<<0) + +/* Bit definitions and macros for USB_PERIODICLISTBASE */ +#define USB_PERIODICLISTBASE_PERBASE(x) (((x)&0x000FFFFF)<<12) + +/* Bit definitions and macros for USB_DEVICEADDR */ +#define USB_DEVICEADDR_USBADR(x) (((x)&0x0000007F)<<25) + +/* Bit definitions and macros for USB_ASYNCLISTADDR */ +#define USB_ASYNCLISTADDR_ASYBASE(x) (((x)&0x07FFFFFF)<<5) + +/* Bit definitions and macros for USB_EPLISTADDR */ +#define USB_EPLISTADDR_EPBASE(x) (((x)&0x001FFFFF)<<11) + +/* Bit definitions and macros for USB_ASNCTTSTS */ +#define USB_ASNCTTSTS_TTAS (0x00000001) +#define USB_ASNCTTSTS_TTAC (0x00000002) + +/* Bit definitions and macros for USB_BURSTSIZE */ +#define USB_BURSTSIZE_RXPBURST(x) (((x)&0x000000FF)<<0) +#define USB_BURSTSIZE_TXPBURST(x) (((x)&0x000000FF)<<8) + +/* Bit definitions and macros for USB_TXFILLTUNING */ +#define USB_TXFILLTUNING_TXSCHOH(x) (((x)&0x000000FF)<<0) +#define USB_TXFILLTUNING_TXSCHHEALTH(x) (((x)&0x0000001F)<<8) +#define USB_TXFILLTUNING_TXFIFOTHRES(x) (((x)&0x0000003F)<<16) + +/* Bit definitions and macros for USB_TXTTFILLTUNING */ +#define USB_TXTTFILLTUNING_TXTTSCHOH(x) (((x)&0x0000001F)<<0) +#define USB_TXTTFILLTUNING_TXTTSCHHEALTH(x) (((x)&0x0000001F)<<8) + +/* Bit definitions and macros for USB_ULPI_VIEWPORT */ +#define USB_ULPI_VIEWPORT_ULPI_DATWR(x) (((x)&0x000000FF)<<0) +#define USB_ULPI_VIEWPORT_ULPI_DATRD(x) (((x)&0x000000FF)<<8) +#define USB_ULPI_VIEWPORT_ULPI_ADDR(x) (((x)&0x000000FF)<<16) +#define USB_ULPI_VIEWPORT_ULPI_PORT(x) (((x)&0x00000007)<<24) +#define USB_ULPI_VIEWPORT_ULPI_SS (0x08000000) +#define USB_ULPI_VIEWPORT_ULPI_RW (0x20000000) +#define USB_ULPI_VIEWPORT_ULPI_RUN (0x40000000) +#define USB_ULPI_VIEWPORT_ULPI_WU (0x80000000) + +/* Bit definitions and macros for USB_CONFIGFLAG */ +#define USB_CONFIGFLAG_CONFIGFLAG(x) (((x)&0xFFFFFFFF)<<0) + +/* Bit definitions and macros for USB_PORTSC */ +#define USB_PORTSC_CCS (0x00000001) +#define USB_PORTSC_CSC (0x00000002) +#define USB_PORTSC_PE (0x00000004) +#define USB_PORTSC_PEC (0x00000008) +#define USB_PORTSC_OCA (0x00000010) +#define USB_PORTSC_OCC (0x00000020) +#define USB_PORTSC_FPR (0x00000040) +#define USB_PORTSC_SUSP (0x00000080) +#define USB_PORTSC_PR (0x00000100) +#define USB_PORTSC_LS(x) (((x)&0x00000003)<<10) +#define USB_PORTSC_PP (0x00001000) +#define USB_PORTSC_PO (0x00002000) +#define USB_PORTSC_PIC(x) (((x)&0x00000003)<<14) +#define USB_PORTSC_PTC(x) (((x)&0x0000000F)<<16) +#define USB_PORTSC_WLCN (0x00100000) +#define USB_PORTSC_WKDS (0x00200000) +#define USB_PORTSC_WKOC (0x00400000) +#define USB_PORTSC_PHCD (0x00800000) +#define USB_PORTSC_PFSC (0x01000000) +#define USB_PORTSC_PSPD(x) (((x)&0x00000003)<<26) +#define USB_PORTSC_PTS(x) (((x)&0x00000003)<<30) +#define USB_PORTSC_PTS_ULPI (0x80000000) +#define USB_PORTSC_PTS_FS_LS (0xC0000000) +#define USB_PORTSC_PSPD_FULL (0x00000000) +#define USB_PORTSC_PSPD_LOW (0x04000000) +#define USB_PORTSC_PSPD_HIGH (0x08000000) +#define USB_PORTSC_PTC_DISBALE (0x00000000) +#define USB_PORTSC_PTC_JSTATE (0x00010000) +#define USB_PORTSC_PTC_KSTATE (0x00020000) +#define USB_PORTSC_PTC_SEQ_NAK (0x00030000) +#define USB_PORTSC_PTC_PACKET (0x00040000) +#define USB_PORTSC_PTC_FORCE_ENABLE (0x00050000) +#define USB_PORTSC_PIC_OFF (0x00000000) +#define USB_PORTSC_PIC_AMBER (0x00004000) +#define USB_PORTSC_PIC_GREEN (0x00008000) +#define USB_PORTSC_LS_SE0 (0x00000000) +#define USB_PORTSC_LS_JSTATE (0x00000400) +#define USB_PORTSC_LS_KSTATE (0x00000800) + +/* Bit definitions and macros for USB_OTGSC */ +#define USB_OTGSC_VD (0x00000001) +#define USB_OTGSC_VC (0x00000002) +#define USB_OTGSC_OT (0x00000008) +#define USB_OTGSC_DP (0x00000010) +#define USB_OTGSC_ID (0x00000100) +#define USB_OTGSC_AVV (0x00000200) +#define USB_OTGSC_ASV (0x00000400) +#define USB_OTGSC_BSV (0x00000800) +#define USB_OTGSC_BSE (0x00001000) +#define USB_OTGSC_1MST (0x00002000) +#define USB_OTGSC_DPS (0x00004000) +#define USB_OTGSC_IDIS (0x00010000) +#define USB_OTGSC_AVVIS (0x00020000) +#define USB_OTGSC_ASVIS (0x00040000) +#define USB_OTGSC_BSVIS (0x00080000) +#define USB_OTGSC_BSEIS (0x00100000) +#define USB_OTGSC_1MSS (0x00200000) +#define USB_OTGSC_DPIS (0x00400000) +#define USB_OTGSC_IDIE (0x01000000) +#define USB_OTGSC_AVVIE (0x02000000) +#define USB_OTGSC_ASVIE (0x04000000) +#define USB_OTGSC_BSVIE (0x08000000) +#define USB_OTGSC_BSEIE (0x10000000) +#define USB_OTGSC_1MSE (0x20000000) +#define USB_OTGSC_DPIE (0x40000000) +#define USB_OTGSC_CLEAR (0x007F0000) +#define USB_OTGSC_ENABLE_ALL (0x7F000000) + +/* Bit definitions and macros for USB_USBMODE */ +#define USB_USBMODE_CM(x) (((x)&0x00000003)<<0) +#define USB_USBMODE_SLOM (0x00000008) +#define USB_USBMODE_SDIS (0x00000010) +#define USB_USBMODE_CM_IDLE (0x00000000) +#define USB_USBMODE_CM_DEVICE (0x00000002) +#define USB_USBMODE_CM_HOST (0x00000003) +#define USB_USBMODE_ES (0x00000004) + +/* Bit definitions and macros for USB_EPSETUPSR */ +#define USB_EPSETUPSR_EPSETUPSTAT(x) (((x)&0x0000003F)<<0) + +/* Bit definitions and macros for USB_EPPRIME */ +#define USB_EPPRIME_PERB(x) (((x)&0x0000003F)<<0) +#define USB_EPPRIME_PETB(x) (((x)&0x0000003F)<<16) +#define USB_EPPRIME_PETB0 (0x00010000) +#define USB_EPPRIME_PETB1 (0x00020000) +#define USB_EPPRIME_PETB2 (0x00040000) +#define USB_EPPRIME_PETB3 (0x00080000) +#define USB_EPPRIME_PETB4 (0x00100000) +#define USB_EPPRIME_PETB5 (0x00200000) +#define USB_EPPRIME_PERB0 (0x00000001) +#define USB_EPPRIME_PERB1 (0x00000002) +#define USB_EPPRIME_PERB2 (0x00000004) +#define USB_EPPRIME_PERB3 (0x00000008) +#define USB_EPPRIME_PERB4 (0x00000010) +#define USB_EPPRIME_PERB5 (0x00000020) + +/* Bit definitions and macros for USB_EPFLUSH */ +#define USB_EPFLUSH_FERB(x) (((x)&0x0000003F)<<0) +#define USB_EPFLUSH_FETB(x) (((x)&0x0000003F)<<16) +#define USB_EPFLUSH_FETB0 (0x00010000) +#define USB_EPFLUSH_FETB1 (0x00020000) +#define USB_EPFLUSH_FETB2 (0x00040000) +#define USB_EPFLUSH_FETB3 (0x00080000) +#define USB_EPFLUSH_FETB4 (0x00100000) +#define USB_EPFLUSH_FETB5 (0x00200000) +#define USB_EPFLUSH_FERB0 (0x00000001) +#define USB_EPFLUSH_FERB1 (0x00000002) +#define USB_EPFLUSH_FERB2 (0x00000004) +#define USB_EPFLUSH_FERB3 (0x00000008) +#define USB_EPFLUSH_FERB4 (0x00000010) +#define USB_EPFLUSH_FERB5 (0x00000020) + +/* Bit definitions and macros for USB_EPSR */ +#define USB_EPSR_ERBR(x) (((x)&0x0000003F)<<0) +#define USB_EPSR_ETBR(x) (((x)&0x0000003F)<<16) +#define USB_EPSR_ETBR0 (0x00010000) +#define USB_EPSR_ETBR1 (0x00020000) +#define USB_EPSR_ETBR2 (0x00040000) +#define USB_EPSR_ETBR3 (0x00080000) +#define USB_EPSR_ETBR4 (0x00100000) +#define USB_EPSR_ETBR5 (0x00200000) +#define USB_EPSR_ERBR0 (0x00000001) +#define USB_EPSR_ERBR1 (0x00000002) +#define USB_EPSR_ERBR2 (0x00000004) +#define USB_EPSR_ERBR3 (0x00000008) +#define USB_EPSR_ERBR4 (0x00000010) +#define USB_EPSR_ERBR5 (0x00000020) + +/* Bit definitions and macros for USB_EPCOMPLETE */ +#define USB_EPCOMPLETE_ERCE(x) (((x)&0x0000003F)<<0) +#define USB_EPCOMPLETE_ETCE(x) (((x)&0x0000003F)<<16) +#define USB_EPCOMPLETE_ETCE0 (0x00010000) +#define USB_EPCOMPLETE_ETCE1 (0x00020000) +#define USB_EPCOMPLETE_ETCE2 (0x00040000) +#define USB_EPCOMPLETE_ETCE3 (0x00080000) +#define USB_EPCOMPLETE_ETCE4 (0x00100000) +#define USB_EPCOMPLETE_ETCE5 (0x00200000) +#define USB_EPCOMPLETE_ERCE0 (0x00000001) +#define USB_EPCOMPLETE_ERCE1 (0x00000002) +#define USB_EPCOMPLETE_ERCE2 (0x00000004) +#define USB_EPCOMPLETE_ERCE3 (0x00000008) +#define USB_EPCOMPLETE_ERCE4 (0x00000010) +#define USB_EPCOMPLETE_ERCE5 (0x00000020) + +/* Bit definitions and macros for USB_EPCR0 */ +#define USB_EPCR0_RXS (0x00000001) +#define USB_EPCR0_RXT(x) (((x)&0x00000003)<<2) +#define USB_EPCR0_RXE (0x00000080) +#define USB_EPCR0_TXS (0x00010000) +#define USB_EPCR0_TXT(x) (((x)&0x00000003)<<18) +#define USB_EPCR0_TXE (0x00800000) + +/* Bit definitions and macros for USB_EPCR */ +#define USB_EPCR_RXS (0x00000001) +#define USB_EPCR_RXD (0x00000002) +#define USB_EPCR_RXT(x) (((x)&0x00000003)<<2) +#define USB_EPCR_RXI (0x00000020) +#define USB_EPCR_RXR (0x00000040) +#define USB_EPCR_RXE (0x00000080) +#define USB_EPCR_TXS (0x00010000) +#define USB_EPCR_TXD (0x00020000) +#define USB_EPCR_TXT(x) (((x)&0x00000003)<<18) +#define USB_EPCR_TXI (0x00200000) +#define USB_EPCR_TXR (0x00400000) +#define USB_EPCR_TXE (0x00800000) +#define USB_EPCR_TXT_CONTROL (0x00000000) +#define USB_EPCR_TXT_ISO (0x00040000) +#define USB_EPCR_TXT_BULK (0x00080000) +#define USB_EPCR_TXT_INT (0x000C0000) +#define USB_EPCR_RXT_CONTROL (0x00000000) +#define USB_EPCR_RXT_ISO (0x00000004) +#define USB_EPCR_RXT_BULK (0x00000008) +#define USB_EPCR_RXT_INT (0x0000000C) + +/********************************************************************* +* SDRAM Controller (SDRAMC) +*********************************************************************/ +/* Bit definitions and macros for SDRAMC_SDMR */ +#define SDRAMC_SDMR_BNKAD_LEMR (0x40000000) +#define SDRAMC_SDMR_BNKAD_LMR (0x00000000) +#define SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) +#define SDRAMC_SDMR_CMD (0x00010000) + +/* Bit definitions and macros for SDRAMC_SDCR */ +#define SDRAMC_SDCR_MODE_EN (0x80000000) +#define SDRAMC_SDCR_CKE (0x40000000) +#define SDRAMC_SDCR_DDR (0x20000000) +#define SDRAMC_SDCR_REF (0x10000000) +#define SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24) +#define SDRAMC_SDCR_OE_RULE (0x00400000) +#define SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16) +#define SDRAMC_SDCR_PS_32 (0x00000000) +#define SDRAMC_SDCR_PS_16 (0x00002000) +#define SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8) +#define SDRAMC_SDCR_IREF (0x00000004) +#define SDRAMC_SDCR_IPALL (0x00000002) + +/* Bit definitions and macros for SDRAMC_SDCFG1 */ +#define SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28) +#define SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24) +#define SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20) +#define SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) +#define SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) +#define SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) +#define SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4) + +/* Bit definitions and macros for SDRAMC_SDCFG2 */ +#define SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28) +#define SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24) +#define SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20) +#define SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) + +/* Bit definitions and macros for SDRAMC_SDDS */ +#define SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8) +#define SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6) +#define SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4) +#define SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2) +#define SDRAMC_SDDS_SB_D(x) ((x)&0x00000003) + +/* Bit definitions and macros for SDRAMC_SDCS */ +#define SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20) +#define SDRAMC_SDCS_CSSZ(x) ((x)&0x0000001F) +#define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) +#define SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) +#define SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) +#define SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) +#define SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) +#define SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) +#define SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) +#define SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) +#define SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) +#define SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) +#define SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) +#define SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) +#define SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) +#define SDRAMC_SDCS_CSSZ_DIABLE (0x00000000) + +/********************************************************************* +* Synchronous Serial Interface (SSI) +*********************************************************************/ +/* Bit definitions and macros for SSI_CR */ +#define SSI_CR_CIS (0x00000200) +#define SSI_CR_TCH (0x00000100) +#define SSI_CR_MCE (0x00000080) +#define SSI_CR_I2S_SLAVE (0x00000040) +#define SSI_CR_I2S_MASTER (0x00000020) +#define SSI_CR_I2S_NORMAL (0x00000000) +#define SSI_CR_SYN (0x00000010) +#define SSI_CR_NET (0x00000008) +#define SSI_CR_RE (0x00000004) +#define SSI_CR_TE (0x00000002) +#define SSI_CR_SSI_EN (0x00000001) + +/* Bit definitions and macros for SSI_ISR */ +#define SSI_ISR_CMDAU (0x00040000) +#define SSI_ISR_CMDDU (0x00020000) +#define SSI_ISR_RXT (0x00010000) +#define SSI_ISR_RDR1 (0x00008000) +#define SSI_ISR_RDR0 (0x00004000) +#define SSI_ISR_TDE1 (0x00002000) +#define SSI_ISR_TDE0 (0x00001000) +#define SSI_ISR_ROE1 (0x00000800) +#define SSI_ISR_ROE0 (0x00000400) +#define SSI_ISR_TUE1 (0x00000200) +#define SSI_ISR_TUE0 (0x00000100) +#define SSI_ISR_TFS (0x00000080) +#define SSI_ISR_RFS (0x00000040) +#define SSI_ISR_TLS (0x00000020) +#define SSI_ISR_RLS (0x00000010) +#define SSI_ISR_RFF1 (0x00000008) +#define SSI_ISR_RFF0 (0x00000004) +#define SSI_ISR_TFE1 (0x00000002) +#define SSI_ISR_TFE0 (0x00000001) + +/* Bit definitions and macros for SSI_IER */ +#define SSI_IER_RDMAE (0x00400000) +#define SSI_IER_RIE (0x00200000) +#define SSI_IER_TDMAE (0x00100000) +#define SSI_IER_TIE (0x00080000) +#define SSI_IER_CMDAU (0x00040000) +#define SSI_IER_CMDU (0x00020000) +#define SSI_IER_RXT (0x00010000) +#define SSI_IER_RDR1 (0x00008000) +#define SSI_IER_RDR0 (0x00004000) +#define SSI_IER_TDE1 (0x00002000) +#define SSI_IER_TDE0 (0x00001000) +#define SSI_IER_ROE1 (0x00000800) +#define SSI_IER_ROE0 (0x00000400) +#define SSI_IER_TUE1 (0x00000200) +#define SSI_IER_TUE0 (0x00000100) +#define SSI_IER_TFS (0x00000080) +#define SSI_IER_RFS (0x00000040) +#define SSI_IER_TLS (0x00000020) +#define SSI_IER_RLS (0x00000010) +#define SSI_IER_RFF1 (0x00000008) +#define SSI_IER_RFF0 (0x00000004) +#define SSI_IER_TFE1 (0x00000002) +#define SSI_IER_TFE0 (0x00000001) + +/* Bit definitions and macros for SSI_TCR */ +#define SSI_TCR_TXBIT0 (0x00000200) +#define SSI_TCR_TFEN1 (0x00000100) +#define SSI_TCR_TFEN0 (0x00000080) +#define SSI_TCR_TFDIR (0x00000040) +#define SSI_TCR_TXDIR (0x00000020) +#define SSI_TCR_TSHFD (0x00000010) +#define SSI_TCR_TSCKP (0x00000008) +#define SSI_TCR_TFSI (0x00000004) +#define SSI_TCR_TFSL (0x00000002) +#define SSI_TCR_TEFS (0x00000001) + +/* Bit definitions and macros for SSI_RCR */ +#define SSI_RCR_RXEXT (0x00000400) +#define SSI_RCR_RXBIT0 (0x00000200) +#define SSI_RCR_RFEN1 (0x00000100) +#define SSI_RCR_RFEN0 (0x00000080) +#define SSI_RCR_RSHFD (0x00000010) +#define SSI_RCR_RSCKP (0x00000008) +#define SSI_RCR_RFSI (0x00000004) +#define SSI_RCR_RFSL (0x00000002) +#define SSI_RCR_REFS (0x00000001) + +/* Bit definitions and macros for SSI_CCR */ +#define SSI_CCR_DIV2 (0x00040000) +#define SSI_CCR_PSR (0x00020000) +#define SSI_CCR_WL(x) (((x)&0x0000000F)<<13) +#define SSI_CCR_DC(x) (((x)&0x0000001F)<<8) +#define SSI_CCR_PM(x) ((x)&0x000000FF) + +/* Bit definitions and macros for SSI_FCSR */ +#define SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28) +#define SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24) +#define SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20) +#define SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16) +#define SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12) +#define SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8) +#define SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4) +#define SSI_FCSR_TFWM0(x) ((x)&0x0000000F) + +/* Bit definitions and macros for SSI_ACR */ +#define SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5) +#define SSI_ACR_WR (0x00000010) +#define SSI_ACR_RD (0x00000008) +#define SSI_ACR_TIF (0x00000004) +#define SSI_ACR_FV (0x00000002) +#define SSI_ACR_AC97EN (0x00000001) + +/* Bit definitions and macros for SSI_ACADD */ +#define SSI_ACADD_SSI_ACADD(x) ((x)&0x0007FFFF) + +/* Bit definitions and macros for SSI_ACDAT */ +#define SSI_ACDAT_SSI_ACDAT(x) ((x)&0x0007FFFF) + +/* Bit definitions and macros for SSI_ATAG */ +#define SSI_ATAG_DDI_ATAG(x) ((x)&0x0000FFFF) + +/********************************************************************* +* Phase Locked Loop (PLL) +*********************************************************************/ +/* Bit definitions and macros for PLL_PODR */ +#define PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4) +#define PLL_PODR_BUSDIV(x) ((x)&0x0F) + +/* Bit definitions and macros for PLL_PLLCR */ +#define PLL_PLLCR_DITHEN (0x80) +#define PLL_PLLCR_DITHDEV(x) ((x)&0x07) + +#endif /* mcf5329_h */ diff --git a/include/asm-m68k/mcfrtc.h b/include/asm-m68k/mcfrtc.h new file mode 100644 index 0000000..7078535 --- /dev/null +++ b/include/asm-m68k/mcfrtc.h @@ -0,0 +1,108 @@ +/* + * RealTime Clock + * + * (C) Copyright 2007 + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MCFRTC_H__ +#define __MCFRTC_H__ + +/* Real time Clock */ +typedef struct rtc_ctrl { + u32 hourmin; /* 0x00 Hours and Minutes Counter Register */ + u32 seconds; /* 0x04 Seconds Counter Register */ + u32 alrm_hm; /* 0x08 Hours and Minutes Alarm Register */ + u32 alrm_sec; /* 0x0C Seconds Alarm Register */ + u32 cr; /* 0x10 Control Register */ + u32 isr; /* 0x14 Interrupt Status Register */ + u32 ier; /* 0x18 Interrupt Enable Register */ + u32 stpwach; /* 0x1C Stopwatch Minutes Register */ + u32 days; /* 0x20 Days Counter Register */ + u32 alrm_day; /* 0x24 Days Alarm Register */ +} rtc_t; + +/* Bit definitions and macros for HOURMIN */ +#define RTC_HOURMIN_MINUTES(x) (((x)&0x0000003F)) +#define RTC_HOURMIN_HOURS(x) (((x)&0x0000001F)<<8) + +/* Bit definitions and macros for SECONDS */ +#define RTC_SECONDS_SECONDS(x) (((x)&0x0000003F)) + +/* Bit definitions and macros for ALRM_HM */ +#define RTC_ALRM_HM_MINUTES(x) (((x)&0x0000003F)) +#define RTC_ALRM_HM_HOURS(x) (((x)&0x0000001F)<<8) + +/* Bit definitions and macros for ALRM_SEC */ +#define RTC_ALRM_SEC_SECONDS(x) (((x)&0x0000003F)) + +/* Bit definitions and macros for CR */ +#define RTC_CR_SWR (0x00000001) +#define RTC_CR_XTL(x) (((x)&0x00000003)<<5) +#define RTC_CR_EN (0x00000080) +#define RTC_CR_32768 (0x0) +#define RTC_CR_32000 (0x1) +#define RTC_CR_38400 (0x2) + +/* Bit definitions and macros for ISR */ +#define RTC_ISR_SW (0x00000001) +#define RTC_ISR_MIN (0x00000002) +#define RTC_ISR_ALM (0x00000004) +#define RTC_ISR_DAY (0x00000008) +#define RTC_ISR_1HZ (0x00000010) +#define RTC_ISR_HR (0x00000020) +#define RTC_ISR_2HZ (0x00000080) +#define RTC_ISR_SAM0 (0x00000100) +#define RTC_ISR_SAM1 (0x00000200) +#define RTC_ISR_SAM2 (0x00000400) +#define RTC_ISR_SAM3 (0x00000800) +#define RTC_ISR_SAM4 (0x00001000) +#define RTC_ISR_SAM5 (0x00002000) +#define RTC_ISR_SAM6 (0x00004000) +#define RTC_ISR_SAM7 (0x00008000) + +/* Bit definitions and macros for IER */ +#define RTC_IER_SW (0x00000001) +#define RTC_IER_MIN (0x00000002) +#define RTC_IER_ALM (0x00000004) +#define RTC_IER_DAY (0x00000008) +#define RTC_IER_1HZ (0x00000010) +#define RTC_IER_HR (0x00000020) +#define RTC_IER_2HZ (0x00000080) +#define RTC_IER_SAM0 (0x00000100) +#define RTC_IER_SAM1 (0x00000200) +#define RTC_IER_SAM2 (0x00000400) +#define RTC_IER_SAM3 (0x00000800) +#define RTC_IER_SAM4 (0x00001000) +#define RTC_IER_SAM5 (0x00002000) +#define RTC_IER_SAM6 (0x00004000) +#define RTC_IER_SAM7 (0x00008000) + +/* Bit definitions and macros for STPWCH */ +#define RTC_STPWCH_CNT(x) (((x)&0x0000003F)) + +/* Bit definitions and macros for DAYS */ +#define RTC_DAYS_DAYS(x) (((x)&0x0000FFFF)) + +/* Bit definitions and macros for ALRM_DAY */ +#define RTC_ALRM_DAY_DAYS(x) (((x)&0x0000FFFF)) + +#endif /* __MCFRTC_H__ */ diff --git a/include/asm-m68k/mcftimer.h b/include/asm-m68k/mcftimer.h index a73b80e..988860d 100644 --- a/include/asm-m68k/mcftimer.h +++ b/include/asm-m68k/mcftimer.h @@ -35,32 +35,31 @@ * Get address specific defines for this ColdFire member. */ #if defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ +#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ #elif defined(CONFIG_M5272) -#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ -#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ +#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ +#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ +#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ +#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ #elif defined(CONFIG_M5282) | defined(CONFIG_M5271) -#define MCFTIMER_BASE1 0x150000 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x160000 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0x170000 /* Base address of TIMER4 */ +#define MCFTIMER_BASE1 0x150000 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x160000 /* Base address of TIMER2 */ +#define MCFTIMER_BASE3 0x170000 /* Base address of TIMER4 */ #define MCFTIMER_BASE4 0x180000 /* Base address of TIMER3 */ #endif /* * Define the TIMER register set addresses. */ -#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ -#define MCFTIMER_TRR 0x02 /* Timer Reference (r/w) */ -#define MCFTIMER_TCR 0x04 /* Timer Capture reg (r/w) */ -#define MCFTIMER_TCN 0x06 /* Timer Counter reg (r/w) */ -#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ - +#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ +#define MCFTIMER_TRR 0x02 /* Timer Reference (r/w) */ +#define MCFTIMER_TCR 0x04 /* Timer Capture reg (r/w) */ +#define MCFTIMER_TCN 0x06 /* Timer Counter reg (r/w) */ +#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ /* * Define the TIMER register set addresses for 5282. @@ -73,29 +72,29 @@ * Bit definitions for the Timer Mode Register (TMR). * Register bit flags are common accross ColdFires. */ -#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ -#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ -#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ -#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ -#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ -#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ -#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ -#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ -#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ -#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ -#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ -#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ -#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ -#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ -#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ -#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ -#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ +#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ +#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ +#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ +#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ +#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ +#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ +#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ +#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ +#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ +#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ +#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ +#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ +#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ +#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ +#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ +#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ +#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ /* * Bit definitions for the Timer Event Registers (TER). */ -#define MCFTIMER_TER_CAP 0x01 /* Capture event */ -#define MCFTIMER_TER_REF 0x02 /* Refernece event */ +#define MCFTIMER_TER_CAP 0x01 /* Capture event */ +#define MCFTIMER_TER_REF 0x02 /* Refernece event */ /* * Bit definitions for the 5282 PIT Control and Status Register (PCSR). @@ -108,6 +107,77 @@ #define MCFTIMER_PCSR_HALTED 0x0020 #define MCFTIMER_PCSR_DOZE 0x0040 +/****************************************************************************/ +/* New Timer structure */ +/****************************************************************************/ +/* DMA Timer module registers */ +typedef struct dtimer_ctrl { + u16 tmr; /* 0x00 Mode register */ + u8 txmr; /* 0x02 Extended Mode register */ + u8 ter; /* 0x03 Event register */ + u32 trr; /* 0x04 Reference register */ + u32 tcr; /* 0x08 Capture register */ + u32 tcn; /* 0x0C Counter register */ +} dtmr_t; + +/*Programmable Interrupt Timer */ +typedef struct pit_ctrl { + u16 pcsr; /* 0x00 Control and Status Register */ + u16 pmr; /* 0x02 Modulus Register */ + u16 pcntr; /* 0x04 Count Register */ +} pit_t; + +/********************************************************************* +* DMA Timers (DTIM) +*********************************************************************/ +/* Bit definitions and macros for DTMR */ +#define DTIM_DTMR_RST (0x0001) /* Reset */ +#define DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) /* Input clock source */ +#define DTIM_DTMR_FRR (0x0008) /* Free run/restart */ +#define DTIM_DTMR_ORRI (0x0010) /* Output reference request/interrupt enable */ +#define DTIM_DTMR_OM (0x0020) /* Output Mode */ +#define DTIM_DTMR_CE(x) (((x)&0x0003)<<6) /* Capture Edge */ +#define DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) /* Prescaler value */ +#define DTIM_DTMR_RST_EN (0x0001) +#define DTIM_DTMR_RST_RST (0x0000) +#define DTIM_DTMR_CE_ANY (0x00C0) +#define DTIM_DTMR_CE_FALL (0x0080) +#define DTIM_DTMR_CE_RISE (0x0040) +#define DTIM_DTMR_CE_NONE (0x0000) +#define DTIM_DTMR_CLK_DTIN (0x0006) +#define DTIM_DTMR_CLK_DIV16 (0x0004) +#define DTIM_DTMR_CLK_DIV1 (0x0002) +#define DTIM_DTMR_CLK_STOP (0x0000) + +/* Bit definitions and macros for DTXMR */ +#define DTIM_DTXMR_MODE16 (0x01) /* Increment Mode */ +#define DTIM_DTXMR_DMAEN (0x80) /* DMA request */ + +/* Bit definitions and macros for DTER */ +#define DTIM_DTER_CAP (0x01) /* Capture event */ +#define DTIM_DTER_REF (0x02) /* Output reference event */ + +/********************************************************************* +* +* Programmable Interrupt Timer Modules (PIT) +* +*********************************************************************/ + +/* Bit definitions and macros for PCSR */ +#define PIT_PCSR_EN (0x0001) +#define PIT_PCSR_RLD (0x0002) +#define PIT_PCSR_PIF (0x0004) +#define PIT_PCSR_PIE (0x0008) +#define PIT_PCSR_OVW (0x0010) +#define PIT_PCSR_HALTED (0x0020) +#define PIT_PCSR_DOZE (0x0040) +#define PIT_PCSR_PRE(x) (((x)&0x000F)<<8) + +/* Bit definitions and macros for PMR */ +#define PIT_PMR_PM(x) (x) + +/* Bit definitions and macros for PCNTR */ +#define PIT_PCNTR_PC(x) (x) /****************************************************************************/ -#endif /* mcftimer_h */ +#endif /* mcftimer_h */ diff --git a/include/asm-m68k/mcfuart.h b/include/asm-m68k/mcfuart.h index 7c0999d..43b49a8 100644 --- a/include/asm-m68k/mcfuart.h +++ b/include/asm-m68k/mcfuart.h @@ -36,106 +36,105 @@ * space. */ #if defined(CONFIG_M5272) -#define MCFUART_BASE1 0x100 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#define MCFUART_BASE1 0x100 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ #elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e) #if defined(CONFIG_NETtel) -#define MCFUART_BASE1 0x180 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#define MCFUART_BASE1 0x180 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ #else -#define MCFUART_BASE1 0x140 /* Base address of UART1 */ -#define MCFUART_BASE2 0x180 /* Base address of UART2 */ +#define MCFUART_BASE1 0x140 /* Base address of UART1 */ +#define MCFUART_BASE2 0x180 /* Base address of UART2 */ #endif #elif defined(CONFIG_M5282) || defined(CONFIG_M5271) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x240 /* Base address of UART2 */ -#define MCFUART_BASE3 0x280 /* Base address of UART3 */ +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x240 /* Base address of UART2 */ +#define MCFUART_BASE3 0x280 /* Base address of UART3 */ #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) #if defined(CONFIG_NETtel) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ #else -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ +#define MCFUART_BASE2 0x200 /* Base address of UART2 */ #endif #endif - /* * Define the ColdFire UART register set addresses. */ -#define MCFUART_UMR 0x00 /* Mode register (r/w) */ -#define MCFUART_USR 0x04 /* Status register (r) */ -#define MCFUART_UCSR 0x04 /* Clock Select (w) */ -#define MCFUART_UCR 0x08 /* Command register (w) */ -#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ -#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ -#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ -#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ -#define MCFUART_UISR 0x14 /* Interrup Status (r) */ -#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ -#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ -#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ +#define MCFUART_UMR 0x00 /* Mode register (r/w) */ +#define MCFUART_USR 0x04 /* Status register (r) */ +#define MCFUART_UCSR 0x04 /* Clock Select (w) */ +#define MCFUART_UCR 0x08 /* Command register (w) */ +#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ +#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ +#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ +#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ +#define MCFUART_UISR 0x14 /* Interrup Status (r) */ +#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ +#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ +#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ #ifdef CONFIG_M5272 -#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ -#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ -#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ +#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ +#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ +#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ #else -#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ +#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ #endif -#define MCFUART_UIPR 0x34 /* Input Port (r) */ -#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ -#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ +#define MCFUART_UIPR 0x34 /* Input Port (r) */ +#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ +#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ #ifdef CONFIG_M5249 /* Note: This isn't in the 5249 docs */ -#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ +#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ #endif /* * Define bit flags in Mode Register 1 (MR1). */ -#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ -#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ -#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ -#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ -#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ - -#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ -#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ -#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ -#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ -#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ - -#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ -#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ -#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ -#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ +#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ +#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ +#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ +#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ +#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ + +#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ +#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ +#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ +#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ +#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ + +#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ +#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ +#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ +#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ /* * Define bit flags in Mode Register 2 (MR2). */ -#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ -#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ -#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ -#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ -#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ +#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ +#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ +#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ +#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ +#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ -#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ -#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ -#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ +#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ +#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ +#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ /* * Define bit flags in Status Register (USR). */ -#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ -#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ -#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ -#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ -#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ -#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ -#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ -#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ +#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ +#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ +#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ +#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ +#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ +#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ +#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ +#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ #define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) @@ -143,13 +142,13 @@ /* * Define bit flags in Clock Select Register (UCSR). */ -#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ -#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ -#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ +#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ +#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ +#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ -#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ -#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ -#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ +#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ +#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ +#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ /* * Define bit flags in Command Register (UCR). @@ -163,59 +162,200 @@ #define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ #define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ -#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ -#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ -#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ -#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ -#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ -#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ +#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ +#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ +#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ +#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ +#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ +#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ /* * Define bit flags in Input Port Change Register (UIPCR). */ -#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ -#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ +#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ +#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ /* * Define bit flags in Input Port Register (UIP). */ -#define MCFUART_UIPR_CTS 0x01 /* CTS value */ +#define MCFUART_UIPR_CTS 0x01 /* CTS value */ /* * Define bit flags in Output Port Registers (UOP). * Clear bit by writing to UOP0, set by writing to UOP1. */ -#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ +#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ /* * Define bit flags in the Auxiliary Control Register (UACR). */ -#define MCFUART_UACR_IEC 0x01 /* Input enable control */ +#define MCFUART_UACR_IEC 0x01 /* Input enable control */ /* * Define bit flags in Interrupt Status Register (UISR). * These same bits are used for the Interrupt Mask Register (UIMR). */ -#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ -#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ -#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ -#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ +#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ +#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ +#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ +#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ #ifdef CONFIG_M5272 /* * Define bit flags in the Transmitter FIFO Register (UTF). */ -#define MCFUART_UTF_TXB 0x1f /* transmitter data level */ -#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */ -#define MCFUART_UTF_TXS 0xc0 /* transmitter status */ +#define MCFUART_UTF_TXB 0x1f /* transmitter data level */ +#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */ +#define MCFUART_UTF_TXS 0xc0 /* transmitter status */ /* * Define bit flags in the Receiver FIFO Register (URF). */ -#define MCFUART_URF_RXB 0x1f /* receiver data level */ -#define MCFUART_URF_FULL 0x20 /* receiver fifo full */ -#define MCFUART_URF_RXS 0xc0 /* receiver status */ +#define MCFUART_URF_RXB 0x1f /* receiver data level */ +#define MCFUART_URF_FULL 0x20 /* receiver fifo full */ +#define MCFUART_URF_RXS 0xc0 /* receiver status */ #endif +#ifdef CONFIG_MCFUART +/* UART module registers */ +/* Register read/write struct */ +typedef struct uart { + u8 umr; /* 0x00 Mode Register */ + u8 resv0[0x3]; + union { + u8 usr; /* 0x04 Status Register */ + u8 ucsr; /* 0x04 Clock Select Register */ + }; + u8 resv1[0x3]; + u8 ucr; /* 0x08 Command Register */ + u8 resv2[0x3]; + union { + u8 utb; /* 0x0c Transmit Buffer */ + u8 urb; /* 0x0c Receive Buffer */ + }; + u8 resv3[0x3]; + union { + u8 uipcr; /* 0x10 Input Port Change Register */ + u8 uacr; /* 0x10 Auxiliary Control reg */ + }; + u8 resv4[0x3]; + union { + u8 uimr; /* 0x14 Interrupt Mask reg */ + u8 uisr; /* 0x14 Interrupt Status reg */ + }; + u8 resv5[0x3]; + u8 ubg1; /* 0x18 Counter Timer Upper Register */ + u8 resv6[0x3]; + u8 ubg2; /* 0x1c Counter Timer Lower Register */ + u8 resv7[0x17]; + u8 uip; /* 0x34 Input Port Register */ + u8 resv8[0x3]; + u8 uop1; /* 0x38 Output Port Set Register */ + u8 resv9[0x3]; + u8 uop0; /* 0x3c Output Port Reset Register */ +} uart_t; + +/********************************************************************* +* Universal Asynchronous Receiver Transmitter (UART) +*********************************************************************/ +/* Bit definitions and macros for UMR */ +#define UART_UMR_BC(x) (((x)&0x03)) +#define UART_UMR_PT (0x04) +#define UART_UMR_PM(x) (((x)&0x03)<<3) +#define UART_UMR_ERR (0x20) +#define UART_UMR_RXIRQ (0x40) +#define UART_UMR_RXRTS (0x80) +#define UART_UMR_SB(x) (((x)&0x0F)) +#define UART_UMR_TXCTS (0x10) /* Trsnsmit CTS */ +#define UART_UMR_TXRTS (0x20) /* Transmit RTS */ +#define UART_UMR_CM(x) (((x)&0x03)<<6) /* CM bits */ +#define UART_UMR_PM_MULTI_ADDR (0x1C) +#define UART_UMR_PM_MULTI_DATA (0x18) +#define UART_UMR_PM_NONE (0x10) +#define UART_UMR_PM_FORCE_HI (0x0C) +#define UART_UMR_PM_FORCE_LO (0x08) +#define UART_UMR_PM_ODD (0x04) +#define UART_UMR_PM_EVEN (0x00) +#define UART_UMR_BC_5 (0x00) +#define UART_UMR_BC_6 (0x01) +#define UART_UMR_BC_7 (0x02) +#define UART_UMR_BC_8 (0x03) +#define UART_UMR_CM_NORMAL (0x00) +#define UART_UMR_CM_ECH (0x40) +#define UART_UMR_CM_LOCAL_LOOP (0x80) +#define UART_UMR_CM_REMOTE_LOOP (0xC0) +#define UART_UMR_SB_STOP_BITS_1 (0x07) +#define UART_UMR_SB_STOP_BITS_15 (0x08) +#define UART_UMR_SB_STOP_BITS_2 (0x0F) + +/* Bit definitions and macros for USR */ +#define UART_USR_RXRDY (0x01) +#define UART_USR_FFULL (0x02) +#define UART_USR_TXRDY (0x04) +#define UART_USR_TXEMP (0x08) +#define UART_USR_OE (0x10) +#define UART_USR_PE (0x20) +#define UART_USR_FE (0x40) +#define UART_USR_RB (0x80) + +/* Bit definitions and macros for UCSR */ +#define UART_UCSR_TCS(x) (((x)&0x0F)) +#define UART_UCSR_RCS(x) (((x)&0x0F)<<4) +#define UART_UCSR_RCS_SYS_CLK (0xD0) +#define UART_UCSR_RCS_CTM16 (0xE0) +#define UART_UCSR_RCS_CTM (0xF0) +#define UART_UCSR_TCS_SYS_CLK (0x0D) +#define UART_UCSR_TCS_CTM16 (0x0E) +#define UART_UCSR_TCS_CTM (0x0F) + +/* Bit definitions and macros for UCR */ +#define UART_UCR_RXC(x) (((x)&0x03)) +#define UART_UCR_TXC(x) (((x)&0x03)<<2) +#define UART_UCR_MISC(x) (((x)&0x07)<<4) +#define UART_UCR_NONE (0x00) +#define UART_UCR_STOP_BREAK (0x70) +#define UART_UCR_START_BREAK (0x60) +#define UART_UCR_BKCHGINT (0x50) +#define UART_UCR_RESET_ERROR (0x40) +#define UART_UCR_RESET_TX (0x30) +#define UART_UCR_RESET_RX (0x20) +#define UART_UCR_RESET_MR (0x10) +#define UART_UCR_TX_DISABLED (0x08) +#define UART_UCR_TX_ENABLED (0x04) +#define UART_UCR_RX_DISABLED (0x02) +#define UART_UCR_RX_ENABLED (0x01) + +/* Bit definitions and macros for UIPCR */ +#define UART_UIPCR_CTS (0x01) +#define UART_UIPCR_COS (0x10) + +/* Bit definitions and macros for UACR */ +#define UART_UACR_IEC (0x01) + +/* Bit definitions and macros for UIMR */ +#define UART_UIMR_TXRDY (0x01) +#define UART_UIMR_RXRDY_FU (0x02) +#define UART_UIMR_DB (0x04) +#define UART_UIMR_COS (0x80) + +/* Bit definitions and macros for UISR */ +#define UART_UISR_TXRDY (0x01) +#define UART_UISR_RXRDY_FU (0x02) +#define UART_UISR_DB (0x04) +#define UART_UISR_RXFTO (0x08) +#define UART_UISR_TXFIFO (0x10) +#define UART_UISR_RXFIFO (0x20) +#define UART_UISR_COS (0x80) + +/* Bit definitions and macros for UIP */ +#define UART_UIP_CTS (0x01) + +/* Bit definitions and macros for UOP1 */ +#define UART_UOP1_RTS (0x01) + +/* Bit definitions and macros for UOP0 */ +#define UART_UOP0_RTS (0x01) +#endif /* CONFIG_MCFUART */ + /****************************************************************************/ -#endif /* mcfuart_h */ +#endif /* mcfuart_h */ diff --git a/include/asm-m68k/ptrace.h b/include/asm-m68k/ptrace.h index 75b2418..01535be 100644 --- a/include/asm-m68k/ptrace.h +++ b/include/asm-m68k/ptrace.h @@ -28,32 +28,32 @@ #ifndef __ASSEMBLY__ struct pt_regs { - ulong d0; - ulong d1; - ulong d2; - ulong d3; - ulong d4; - ulong d5; - ulong d6; - ulong d7; - ulong a0; - ulong a1; - ulong a2; - ulong a3; - ulong a4; - ulong a5; - ulong a6; -#if defined(CONFIG_M5272) || defined(CONFIG_M5282) || defined(CONFIG_M5249) || defined(CONFIG_M5271) - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ + ulong d0; + ulong d1; + ulong d2; + ulong d3; + ulong d4; + ulong d5; + ulong d6; + ulong d7; + ulong a0; + ulong a1; + ulong a2; + ulong a3; + ulong a4; + ulong a5; + ulong a6; +#if defined(__M68K__) + unsigned format:4; /* frame format specifier */ + unsigned vector:12; /* vector offset */ unsigned short sr; - unsigned long pc; + unsigned long pc; #else unsigned short sr; - unsigned long pc; + unsigned long pc; #endif }; -#endif /* #ifndef __ASSEMBLY__ */ +#endif /* #ifndef __ASSEMBLY__ */ -#endif /* #ifndef _M68K_PTRACE_H */ +#endif /* #ifndef _M68K_PTRACE_H */ diff --git a/include/asm-m68k/u-boot.h b/include/asm-m68k/u-boot.h index 7a6a8c1..70dbda4 100644 --- a/include/asm-m68k/u-boot.h +++ b/include/asm-m68k/u-boot.h @@ -37,24 +37,36 @@ #ifndef __ASSEMBLY__ typedef struct bd_info { - unsigned long bi_memstart; /* start of DRAM memory */ - unsigned long bi_memsize; /* size of DRAM memory in bytes */ - unsigned long bi_flashstart; /* start of FLASH memory */ - unsigned long bi_flashsize; /* size of FLASH memory */ - unsigned long bi_flashoffset; /* reserved area for startup monitor */ - unsigned long bi_sramstart; /* start of SRAM memory */ - unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned long bi_mbar_base; /* base of internal registers */ - unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ - unsigned long bi_boot_params; /* where this board expects params */ - unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ - unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ - unsigned long bi_intfreq; /* Internal Freq, in MHz */ - unsigned long bi_busfreq; /* Bus Freq, in MHz */ - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ + unsigned long bi_mbar_base; /* base of internal registers */ + unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ + unsigned long bi_boot_params; /* where this board expects params */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet adress */ + unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ + unsigned long bi_intfreq; /* Internal Freq, in MHz */ + unsigned long bi_busfreq; /* Bus Freq, in MHz */ + unsigned long bi_baudrate; /* Console Baudrate */ + +#ifdef CONFIG_HAS_ETH1 + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#endif +#ifdef CONFIG_HAS_ETH2 + /* third onboard ethernet port */ + unsigned char bi_enet2addr[6]; +#endif +#ifdef CONFIG_HAS_ETH3 + unsigned char bi_enet3addr[6]; +#endif } bd_t; -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLY__ */ -#endif /* __U_BOOT_H__ */ +#endif /* __U_BOOT_H__ */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h new file mode 100644 index 0000000..ac529df --- /dev/null +++ b/include/configs/M5329EVB.h @@ -0,0 +1,275 @@ +/* + * Configuation settings for the Freescale MCF5329 FireEngine board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5329EVB_H +#define _M5329EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF532x /* define processor family */ +#define CONFIG_M5329 /* define processor type */ + +#undef DEBUG + +#define CONFIG_MCFSERIAL +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ + +#define CFG_NUM_IRQS 128 + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_CACHE | \ + CFG_CMD_DATE | \ + CFG_CMD_ELF | \ + CFG_CMD_FLASH | \ + (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO \ + ) + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_IOBASE 0xFC030000 +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#define CONFIG_MCFUART +#ifdef CONFIG_MCFUART +# define CFG_UART_PORT (0) +# define CFG_UART_BASE (0xFC060000) +#endif + +#define CONFIG_MCFRTC +#ifdef CONFIG_MCFRTC +# define CFG_MCFRTC_BASE (0xFC0A8000) +# undef RTC_DEBUG +#endif + +/* Timer */ +#define CONFIG_MCFTMR +#ifdef CONFIG_MCFTMR +# define CFG_UDELAY_BASE (0xFC070000) +# define CFG_TMR_BASE (0xFC074000) +# define CFG_TMRINTR_NO (33) +# define CFG_TMRINTR_MASK (2) +# define CFG_TMRINTR_PRI (6) +# define CFG_TIMER_PRESCALER (((CFG_CLK / 1000000) - 1) << 8) +#endif + +#undef CONFIG_MCFPIT +#ifdef CONFIG_MCFPIT +# define CFG_UDELAY_BASE (0xFC080000) +# define CFG_PIT_BASE (0xFC084000) +# define CFG_PIT_PRESCALE (6) +#endif + +#define CONFIG_MCFINTC +#ifdef CONFIG_MCFINTC +# define CFG_INTR_BASE (0xFC048000) +# define CFG_NUM_IRQ0 64 +# define CFG_NUM_IRQ1 64 +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5329EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off 0 2ffff;" \ + "era 0 2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" + +#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x40010000 + +#define CFG_HZ 1000 +#define CFG_CLK 80000000 +#define CFG_CPU_CLK CFG_CLK * 3 + +#define CFG_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x80000000 +#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x221 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x40000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_CFG1 0x53722730 +#define CFG_SDRAM_CFG2 0x56670000 +#define CFG_SDRAM_CTRL 0xE1092000 +#define CFG_SDRAM_EMOD 0x40010000 +#define CFG_SDRAM_MODE 0x018D0000 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#undef CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#else +# define CFG_FLASH_UNLOCK_TOUT 1000 +# define CFG_FLASH_WRITE_TOUT 1000 +#endif + +#define CFG_FLASH_BASE 0 +#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 +#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Chipselect bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - CompactFlash and registers + * CS2 - NAND Flash 16, 32, or 64MB + * CS3 - Available + * CS4 - Available + * CS5 - Available + */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x007f0001 +#define CFG_CS0_CTRL 0x00001fa0 + +#define CFG_CS1_BASE 0x1000 +#define CFG_CS1_MASK 0x001f0001 +#define CFG_CS1_CTRL 0x002A3780 + +#ifdef NANDFLASH_SIZE +#define CFG_CS2_BASE 0x00800000 +#define CFG_CS2_MASK 0x00ff0001 +#define CFG_CS2_CTRL 0x00001f60 +#endif + +#define CONFIG_UDP_CHECKSUM + +#endif /* _M5329EVB_H */ diff --git a/lib_m68k/Makefile b/lib_m68k/Makefile index 82165f0..03784fd 100644 --- a/lib_m68k/Makefile +++ b/lib_m68k/Makefile @@ -27,7 +27,7 @@ LIB = $(obj)lib$(ARCH).a SOBJS = -COBJS = cache.o traps.o time.o board.o m68k_linux.o +COBJS = cache.o traps.o time.o interrupts.o board.o m68k_linux.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/lib_m68k/board.c b/lib_m68k/board.c index 6aaf609..1b515a4 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -221,6 +221,7 @@ static int init_func_i2c (void) */ init_fnc_t *init_sequence[] = { + get_clocks, env_init, init_baudrate, serial_init, @@ -371,6 +372,10 @@ board_init_f (ulong bootflag) */ bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */ bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */ +#ifdef CFG_INIT_RAM_ADDR + bd->bi_sramstart = CFG_INIT_RAM_ADDR; /* start of SRAM memory */ + bd->bi_sramsize = CFG_INIT_RAM_END; /* size of SRAM memory */ +#endif bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */ bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */ @@ -430,6 +435,10 @@ void board_init_r (gd_t *id, ulong dest_addr) gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ +#ifdef CONFIG_SERIAL_MULTI + serial_initialize(); +#endif + debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); WATCHDOG_RESET (); @@ -489,7 +498,7 @@ void board_init_r (gd_t *id, ulong dest_addr) /* * Setup trap handlers */ - trap_init (0); + trap_init (CFG_SDRAM_BASE); #if !defined(CFG_NO_FLASH) puts ("FLASH: "); @@ -562,12 +571,48 @@ void board_init_r (gd_t *id, ulong dest_addr) if (s) s = (*e) ? e + 1 : e; } +#ifdef CONFIG_HAS_ETH1 + /* handle the 2nd ethernet address */ + + s = getenv ("eth1addr"); + for (i = 0; i < 6; ++i) { + bd->bi_enet1addr[i] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } +#endif +#ifdef CONFIG_HAS_ETH2 + /* handle the 3rd ethernet address */ + + s = getenv ("eth2addr"); + for (i = 0; i < 6; ++i) { + bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } +#endif + +#ifdef CONFIG_HAS_ETH3 + /* handle 4th ethernet address */ + s = getenv("eth3addr"); + for (i = 0; i < 6; ++i) { + bd->bi_enet3addr[i] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } +#endif /* IP Address */ bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); WATCHDOG_RESET (); +#if defined(CONFIG_PCI) + /* + * Do pci configuration + */ + pci_init (); +#endif /** leave this here (after malloc(), environment and PCI are working) **/ /* Initialize devices */ @@ -640,15 +685,33 @@ void board_init_r (gd_t *id, ulong dest_addr) nand_init(); /* go init the NAND */ #endif -#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET) +#if (CONFIG_COMMANDS & CFG_CMD_NET) WATCHDOG_RESET(); +#if defined(FEC_ENET) eth_init(bd); #endif +#if defined(CONFIG_NET_MULTI) + puts ("Net: "); + eth_initialize (bd); +#endif +#endif #ifdef CONFIG_POST post_run (NULL, POST_RAM | post_bootmode_get(0)); #endif +#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && !(CONFIG_COMMANDS & CFG_CMD_IDE) + WATCHDOG_RESET (); + puts ("PCMCIA:"); + pcmcia_init (); +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_IDE) + WATCHDOG_RESET (); + puts ("IDE: "); + ide_init (); +#endif /* CFG_CMD_IDE */ + #ifdef CONFIG_LAST_STAGE_INIT WATCHDOG_RESET (); /* diff --git a/lib_m68k/interrupts.c b/lib_m68k/interrupts.c new file mode 100644 index 0000000..6b3ce89 --- /dev/null +++ b/lib_m68k/interrupts.c @@ -0,0 +1,118 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#ifdef CONFIG_MCFINTC +#define NR_IRQS (CFG_NUM_IRQS) + +/* + * Interrupt vector functions. + */ +struct interrupt_action { + interrupt_handler_t *handler; + void *arg; +}; + +static struct interrupt_action irq_vecs[NR_IRQS]; + +static __inline__ unsigned short get_sr (void) +{ + unsigned short sr; + + asm volatile ("move.w %%sr,%0":"=r" (sr):); + + return sr; +} + +static __inline__ void set_sr (unsigned short sr) +{ + asm volatile ("move.w %0,%%sr"::"r" (sr)); +} + +/************************************************************************/ +/* + * Install and free an interrupt handler + */ +void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg) +{ + if ((vec < 0) || (vec > NR_IRQS)) { + printf ("irq_install_handler: wrong interrupt vector %d\n", + vec); + return; + } + + irq_vecs[vec].handler = handler; + irq_vecs[vec].arg = arg; +} + +void irq_free_handler (int vec) +{ + if ((vec < 0) || (vec > NR_IRQS)) { + return; + } + + irq_vecs[vec].handler = NULL; + irq_vecs[vec].arg = NULL; +} + +void enable_interrupts (void) +{ + unsigned short sr; + + sr = get_sr (); + set_sr (sr & ~0x0700); +} + +int disable_interrupts (void) +{ + unsigned short sr; + + sr = get_sr (); + set_sr (sr | 0x0700); + + return ((sr & 0x0700) == 0); /* return TRUE, if interrupts were enabled before */ +} + +void int_handler (struct pt_regs *fp) +{ + int vec; + + vec = (fp->vector >> 2) & 0xff; + if (vec > 0x40) + vec -= 0x40; + else + return; + + if (irq_vecs[vec].handler != NULL) { + irq_vecs[vec].handler (irq_vecs[vec].arg); + } else { + printf ("\nBogus External Interrupt Vector %d\n", vec); + } +} +#endif /* CONFIG_MCFINTC */ \ No newline at end of file diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 12e38f0..0e4efa4 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -46,13 +46,11 @@ #include #endif - static ulong timestamp; #if defined(CONFIG_M5282) || defined(CONFIG_M5271) static unsigned short lastinc; #endif - #if defined(CONFIG_M5272) /* * We use timer 3 which is running with a period of 1 us @@ -293,6 +291,171 @@ void set_timer (ulong t) } #endif +#if defined(CONFIG_MCFTMR) +#ifndef CFG_UDELAY_BASE +# error "uDelay base not defined!" +#endif + +#if !defined(CFG_TMR_BASE) || !defined(CFG_INTR_BASE) || !defined(CFG_TMRINTR_NO) || !defined(CFG_TMRINTR_MASK) +# error "TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!" +#endif + +#include + +extern void dtimer_interrupt(void *not_used); +extern void dtimer_interrupt_setup(void); +extern void dtimer_interrupt_enable(void); + +void udelay(unsigned long usec) +{ + volatile dtmr_t *timerp = (dtmr_t *) (CFG_UDELAY_BASE); + uint start, now, tmp; + + while (usec > 0) { + if (usec > 65000) + tmp = 65000; + else + tmp = usec; + usec = usec - tmp; + + /* Set up TIMER 3 as timebase clock */ + timerp->tmr = DTIM_DTMR_RST_RST; + timerp->tcn = 0; + /* set period to 1 us */ + timerp->tmr = + (((CFG_CLK / 1000000) - + 1) << 8) | DTIM_DTMR_CLK_DIV1 | DTIM_DTMR_FRR | DTIM_DTMR_RST_EN; + + start = now = timerp->tcn; + while (now < start + tmp) + now = timerp->tcn; + } +} + +void dtimer_interrupt(void *not_used) +{ + volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE); + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + /* check for timer interrupt asserted */ + if ((intp->iprh0 & CFG_TMRINTR_MASK) == CFG_TMRINTR_MASK) { + timerp->ter = (DTIM_DTER_CAP | DTIM_DTER_REF); + timestamp++; + return; + } +} + +void timer_init(void) +{ + volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE); + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + timestamp = 0; + + timerp->tcn = 0; + timerp->trr = 0; + + /* Set up TIMER 4 as clock */ + timerp->tmr = DTIM_DTMR_RST_RST; + + /* initialize and enable timer 4 interrupt */ + irq_install_handler(CFG_TMRINTR_NO, dtimer_interrupt, 0); + intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + + timerp->tcn = 0; + timerp->trr = 1000; /* Interrupt every ms */ + + intp->imrh0 &= ~CFG_TMRINTR_MASK; + + /* set a period of 1us, set timer mode to restart and enable timer and interrupt */ + timerp->tmr = CFG_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | + DTIM_DTMR_FRR | DTIM_DTMR_ORRI | DTIM_DTMR_RST_EN; +} + +void reset_timer(void) +{ + timestamp = 0; +} + +ulong get_timer(ulong base) +{ + return (timestamp - base); +} + +void set_timer(ulong t) +{ + timestamp = t; +} +#endif /* CONFIG_MCFTMR */ + +#if defined(CONFIG_MCFPIT) +#if !defined(CFG_PIT_BASE) +# error "CFG_PIT_BASE not defined!" +#endif + +static unsigned short lastinc; + +void udelay(unsigned long usec) +{ + volatile pit_t *timerp = (pit_t *) (CFG_UDELAY_BASE); + uint tmp; + + while (usec > 0) { + if (usec > 65000) + tmp = 65000; + else + tmp = usec; + usec = usec - tmp; + + /* Set up TIMER 3 as timebase clock */ + timerp->pcsr = PIT_PCSR_OVW; + timerp->pmr = 0; + /* set period to 1 us */ + timerp->pcsr |= PIT_PCSR_PRE(CFG_PIT_PRESCALE) | PIT_PCSR_EN; + + timerp->pmr = tmp; + while (timerp->pcntr > 0) ; + } +} + +void timer_init(void) +{ + volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE); + timestamp = 0; + + /* Set up TIMER 4 as poll clock */ + timerp->pcsr = PIT_PCSR_OVW; + timerp->pmr = lastinc = 0; + timerp->pcsr |= PIT_PCSR_PRE(CFG_PIT_PRESCALE) | PIT_PCSR_EN; +} + +void set_timer(ulong t) +{ + volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE); + + timestamp = 0; + timerp->pmr = lastinc = 0; +} + +ulong get_timer(ulong base) +{ + unsigned short now, diff; + volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE); + + now = timerp->pcntr; + diff = -(now - lastinc); + + timestamp += diff; + lastinc = now; + return timestamp - base; +} + +void wait_ticks(unsigned long ticks) +{ + set_timer(0); + while (get_timer(0) < ticks) ; +} +#endif /* CONFIG_MCFPIT */ /* * This function is derived from PowerPC code (read timebase as long long). diff --git a/net/eth.c b/net/eth.c index 0fc2211..cefd30f 100644 --- a/net/eth.c +++ b/net/eth.c @@ -58,6 +58,7 @@ extern int npe_initialize(bd_t *); extern int uec_initialize(int); extern int bfin_EMAC_initialize(bd_t *); extern int atstk1000_eth_initialize(bd_t *); +extern int mcffec_initialize(bd_t*); static struct eth_device *eth_devices, *eth_current; diff --git a/rtc/Makefile b/rtc/Makefile index 96c68c0..2e6f3bd 100644 --- a/rtc/Makefile +++ b/rtc/Makefile @@ -31,7 +31,8 @@ COBJS = date.o \ bf5xx_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \ ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o ds3231.o \ m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \ - mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o + mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o \ + mcfrtc.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/rtc/mcfrtc.c b/rtc/mcfrtc.c new file mode 100644 index 0000000..c7eb53f --- /dev/null +++ b/rtc/mcfrtc.c @@ -0,0 +1,120 @@ +/* + * (C) Copyright 2007 + * Freescale Semiconductor Tsi-Chung.Liew@freescale.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include + +#if defined(CONFIG_MCFRTC) && (CONFIG_COMMANDS & CFG_CMD_DATE) + +#undef RTC_DEBUG + +#ifndef CFG_MCFRTC_BASE +#error RTC_BASE is not defined! +#endif + +#define isleap(y) ((((y) % 4) == 0 && ((y) % 100) != 0) || ((y) % 400) == 0) +#define STARTOFTIME 1970 + +void rtc_get(struct rtc_time *tmp) +{ + volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE); + + int rtc_days, rtc_hrs, rtc_mins; + int tim; + + rtc_days = rtc->days; + rtc_hrs = rtc->hourmin >> 8; + rtc_mins = RTC_HOURMIN_MINUTES(rtc->hourmin); + + tim = (rtc_days * 24) + rtc_hrs; + tim = (tim * 60) + rtc_mins; + tim = (tim * 60) + rtc->seconds; + + to_tm(tim, tmp); + + tmp->tm_yday = 0; + tmp->tm_isdst = 0; + +#ifdef RTC_DEBUG + printf("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); +#endif +} + +void rtc_set(struct rtc_time *tmp) +{ + volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE); + + static int month_days[12] = { + 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 + }; + int days, i, months; + + if (tmp->tm_year > 2037) { + printf("Unable to handle. Exceeding integer limitation!\n"); + tmp->tm_year = 2027; + } +#ifdef RTC_DEBUG + printf("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); +#endif + + /* calculate days by years */ + for (i = STARTOFTIME, days = 0; i < tmp->tm_year; i++) { + days += 365 + isleap(i); + } + + /* calculate days by months */ + months = tmp->tm_mon - 1; + for (i = 0; i < months; i++) { + days += month_days[i]; + + if (i == 1) + days += isleap(i); + } + + days += tmp->tm_mday - 1; + + rtc->days = days; + rtc->hourmin = (tmp->tm_hour << 8) | tmp->tm_min; + rtc->seconds = tmp->tm_sec; +} + +void rtc_reset(void) +{ + volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE); + + if ((rtc->cr & RTC_CR_EN) == 0) { + printf("real-time-clock was stopped. Now starting...\n"); + rtc->cr |= RTC_CR_EN; + } + + rtc->cr |= RTC_CR_SWR; +} + +#endif /* CONFIG_MCFRTC && CFG_CMD_DATE */ -- cgit v1.1 From d677b32855f577ae2690dcd64a172cdd706e0ffc Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 22 Jun 2007 10:34:12 +0200 Subject: [patch] add nand_init() prototype to nand.h since nand_init() is expected to be called by other parts of u-boot, there should be a prototype for it in nand.h Signed-off-by: Mike Frysinger Signed-off-by: Stefan Roese --- include/nand.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/nand.h b/include/nand.h index 23493f7..3c0752e 100644 --- a/include/nand.h +++ b/include/nand.h @@ -32,6 +32,7 @@ typedef struct mtd_info nand_info_t; extern int nand_curr_device; extern nand_info_t nand_info[]; +extern void nand_init(void); static inline int nand_read(nand_info_t *info, ulong ofs, ulong *len, u_char *buf) { -- cgit v1.1 From 10e038932f22ee80ebd53de312531e70e6590a2f Mon Sep 17 00:00:00 2001 From: Thomas Knobloch Date: Fri, 6 Jul 2007 14:58:39 +0200 Subject: [NAND] Bad block skipping for command nboot The old implementation of command nboot does not support reading the image from NAND flash with skipping of bad blocks. The patch implements a new version of the nboot command: by calling nboot.jffs2 from the u-boot command line the command will load the image from NAND flash with respect to bad blocks (by using nand_read_opts()). This is similar to e.g. the NAND read command: "nand read.jffs2 ...". Signed-off-by: Thomas Knobloch Signed-off-by: Stefan Roese --- common/cmd_nand.c | 37 ++++++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-) diff --git a/common/cmd_nand.c b/common/cmd_nand.c index b011b5e..9ef31d4 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -476,14 +476,31 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, ulong offset, ulong addr, char *cmd) { int r; - char *ep; + char *ep, *s; ulong cnt; image_header_t *hdr; + int jffs2 = 0; + + s = strchr(cmd, '.'); + if (s != NULL && + (!strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i"))) + jffs2 = 1; printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset); cnt = nand->oobblock; - r = nand_read(nand, offset, &cnt, (u_char *) addr); + if (jffs2) { + nand_read_options_t opts; + memset(&opts, 0, sizeof(opts)); + opts.buffer = (u_char*) addr; + opts.length = cnt; + opts.offset = offset; + opts.quiet = 1; + r = nand_read_opts(nand, &opts); + } else { + r = nand_read(nand, offset, &cnt, (u_char *) addr); + } + if (r) { puts("** Read error\n"); SHOW_BOOT_PROGRESS(-1); @@ -501,8 +518,18 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, print_image_hdr(hdr); cnt = (ntohl(hdr->ih_size) + sizeof (image_header_t)); + if (jffs2) { + nand_read_options_t opts; + memset(&opts, 0, sizeof(opts)); + opts.buffer = (u_char*) addr; + opts.length = cnt; + opts.offset = offset; + opts.quiet = 1; + r = nand_read_opts(nand, &opts); + } else { + r = nand_read(nand, offset, &cnt, (u_char *) addr); + } - r = nand_read(nand, offset, &cnt, (u_char *) addr); if (r) { puts("** Read error\n"); SHOW_BOOT_PROGRESS(-1); @@ -550,7 +577,7 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) if (argc > 3) goto usage; if (argc == 3) - addr = simple_strtoul(argv[2], NULL, 16); + addr = simple_strtoul(argv[1], NULL, 16); else addr = CFG_LOAD_ADDR; return nand_load_image(cmdtp, &nand_info[dev->id->num], @@ -605,7 +632,7 @@ usage: U_BOOT_CMD(nboot, 4, 1, do_nandboot, "nboot - boot from NAND device\n", - "[partition] | [[[loadAddr] dev] offset]\n"); + "[.jffs2] [partition] | [[[loadAddr] dev] offset]\n"); #endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ -- cgit v1.1 From e09f7ab5749c345f924da272bea0521a73af5b11 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 9 Jul 2007 10:10:04 +0200 Subject: Migrate esd 405EP boards to new NAND subsystem This patch prepares the migration from the legacy NAND driver to U-Boot's new NAND subsystem for esd boards. Signed-off-by: Matthias Fuchs --- board/esd/common/auto_update.c | 4 ++ board/esd/common/esd405ep_nand.c | 87 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 91 insertions(+) create mode 100644 board/esd/common/esd405ep_nand.c diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index 001fd68..b5f7722 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -31,7 +31,9 @@ #include #include #include +#if defined(CFG_NAND_LEGACY) #include +#endif #include #include @@ -294,6 +296,8 @@ int au_do_update(int i, long sz) rc = nand_legacy_rw(nand_dev_desc, NANDRW_WRITE | NANDRW_JFFS2, start, nbytes, (size_t *)&total, (uchar *)addr); debug ("nand_legacy_rw: ret=%x total=%d nbytes=%d\n", rc, total, nbytes); +#else + rc = -1; #endif } if (rc != 0) { diff --git a/board/esd/common/esd405ep_nand.c b/board/esd/common/esd405ep_nand.c new file mode 100644 index 0000000..7ac4b83 --- /dev/null +++ b/board/esd/common/esd405ep_nand.c @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2007 + * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#include +#include + +/* + * hardware specific access to control-lines + */ +static void esd405ep_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd) +{ + switch(cmd) { + case NAND_CTL_SETCLE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CLE); + break; + case NAND_CTL_CLRCLE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CLE); + break; + case NAND_CTL_SETALE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_ALE); + break; + case NAND_CTL_CLRALE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_ALE); + break; + case NAND_CTL_SETNCE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CE); + break; + case NAND_CTL_CLRNCE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE); + break; + } +} + + +/* + * read device ready pin + */ +static int esd405ep_nand_device_ready(struct mtd_info *mtdinfo) +{ + if (in_be32((void *)GPIO0_IR) & CFG_NAND_RDY) + return 1; + return 0; +} + + +int board_nand_init(struct nand_chip *nand) +{ + /* + * Set NAND-FLASH GPIO signals to defaults + */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE); + + /* + * Initialize nand_chip structure + */ + nand->hwcontrol = esd405ep_nand_hwcontrol; + nand->dev_ready = esd405ep_nand_device_ready; + nand->eccmode = NAND_ECC_SOFT; + nand->chip_delay = NAND_BIG_DELAY_US; + nand->options = NAND_SAMSUNG_LP_OPTIONS; + return 0; +} +#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ -- cgit v1.1 From bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 9 Jul 2007 10:10:06 +0200 Subject: Migrate esd 405EP boards to new NAND subsystem Migrate esd 405EP boards to new NAND subsystem -cleanup -use correct io accessors (in/out_be32()) Signed-off-by: Matthias Fuchs --- board/esd/ash405/Makefile | 4 +++- board/esd/ash405/ash405.c | 43 +++++++++-------------------------- board/esd/cms700/Makefile | 5 ++++- board/esd/cms700/cms700.c | 39 +++++++------------------------- board/esd/hh405/Makefile | 5 ++++- board/esd/hh405/hh405.c | 22 +----------------- board/esd/hub405/Makefile | 4 +++- board/esd/hub405/hub405.c | 34 ---------------------------- board/esd/plu405/Makefile | 5 ++++- board/esd/plu405/plu405.c | 56 ++++++++-------------------------------------- board/esd/voh405/Makefile | 4 +++- board/esd/voh405/voh405.c | 20 ----------------- board/esd/wuh405/Makefile | 4 +++- board/esd/wuh405/wuh405.c | 33 --------------------------- include/configs/ASH405.h | 43 ++++++++++------------------------- include/configs/CMS700.h | 39 ++++++++------------------------ include/configs/HH405.h | 39 ++++++++------------------------ include/configs/HUB405.h | 39 ++++++++------------------------ include/configs/PLU405.h | 57 ++++++++--------------------------------------- include/configs/VOH405.h | 39 ++++++++------------------------ include/configs/WUH405.h | 42 +++++++++------------------------- 21 files changed, 120 insertions(+), 456 deletions(-) diff --git a/board/esd/ash405/Makefile b/board/esd/ash405/Makefile index 4d75868..308f752 100644 --- a/board/esd/ash405/Makefile +++ b/board/esd/ash405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c index 84fc3a0..0151d74 100644 --- a/board/esd/ash405/ash405.c +++ b/board/esd/ash405/ash405.c @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -33,6 +34,7 @@ #endif extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +extern void lxt971_no_sleep(void); /* fpga configuration data - gzip compressed and generated by bin2c */ const unsigned char fpgadata[] = @@ -164,18 +166,12 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST); udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -218,35 +214,18 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } /* ------------------------------------------------------------------------- */ -int testdram (void) +void reset_phy(void) { - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} +#ifdef CONFIG_LXT971_NO_SLEEP -/* ------------------------------------------------------------------------- */ - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} + /* + * Disable sleep mode in LXT971 + */ + lxt971_no_sleep(); #endif +} diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile index df48766..0d4ab2d 100644 --- a/board/esd/cms700/Makefile +++ b/board/esd/cms700/Makefile @@ -33,7 +33,10 @@ CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ ../common/xilinx_jtag/ports.o -COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD) +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + $(CPLD) \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index cb04710..2cdd7be 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2007 * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -68,9 +69,9 @@ int board_early_init_f (void) /* * Reset CPLD via GPIO12 (CS3) pin */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_PLD_RESET); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_PLD_RESET); udelay(1000); /* wait 1ms */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_PLD_RESET); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_PLD_RESET); udelay(1000); /* wait 1ms */ return 0; @@ -94,13 +95,7 @@ int misc_init_r (void) /* * Setup and enable EEPROM write protection */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); - - /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP); return (0); } @@ -153,11 +148,6 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } @@ -180,17 +170,17 @@ int eeprom_write_enable (unsigned dev_addr, int state) switch (state) { case 1: /* Enable write access, clear bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_EEPROM_WP); state = 0; break; case 0: /* Disable write access, set bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP); state = 0; break; default: /* Read current status back. */ - state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP)); + state = (0 == (in_be32((void *)GPIO0_OR) & CFG_EEPROM_WP)); break; } } @@ -235,19 +225,6 @@ U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, /* ------------------------------------------------------------------------- */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP diff --git a/board/esd/hh405/Makefile b/board/esd/hh405/Makefile index ce7876c..0e5e57a 100644 --- a/board/esd/hh405/Makefile +++ b/board/esd/hh405/Makefile @@ -28,7 +28,10 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ + ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index ea344c0..67b5d54 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -5,7 +5,7 @@ * (C) Copyright 2005 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -477,12 +477,6 @@ int misc_init_r (void) out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Reset touch-screen controller */ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_TOUCH_RST); @@ -690,20 +684,6 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - - #if defined(CFG_EEPROM_WREN) /* Input: I2C address of EEPROM device to enable. * -1: deliver current state diff --git a/board/esd/hub405/Makefile b/board/esd/hub405/Makefile index 4d75868..308f752 100644 --- a/board/esd/hub405/Makefile +++ b/board/esd/hub405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c index 1e0accb..25c8068 100644 --- a/board/esd/hub405/hub405.c +++ b/board/esd/hub405/hub405.c @@ -153,12 +153,6 @@ int misc_init_r (void) out32(GPIO0_OR, val); /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * check board type and setup AP power */ str = getenv("bd_type"); /* this is only set on non prototype hardware */ @@ -242,33 +236,5 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } - - -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile index ce7876c..0e5e57a 100644 --- a/board/esd/plu405/Makefile +++ b/board/esd/plu405/Makefile @@ -28,7 +28,10 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ + ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index 59171f8..f026a7a 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -31,6 +32,8 @@ #define FPGA_DEBUG #endif +DECLARE_GLOBAL_DATA_PTR; + extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); extern void lxt971_no_sleep(void); @@ -114,6 +117,10 @@ int misc_init_r (void) int index; int i; + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + dst = malloc(CFG_FPGA_MAX_SIZE); if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { printf ("GUNZIP ERROR - must RESET board to recover\n"); @@ -177,18 +184,12 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST); udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -226,24 +227,10 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - #ifdef CONFIG_IDE_RESET void ide_set_reset(int on) { @@ -262,31 +249,6 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - - -#ifdef CONFIG_AUTO_UPDATE_SHOW -void board_auto_update_show(int au_active) -{ - if (au_active) { - printf("\n Dies ist die board-funktion: Updating!!!\n"); - } else { - printf("\n Dies ist die board-funktion: Updating done!!!\n"); - } -} -#endif - void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP diff --git a/board/esd/voh405/Makefile b/board/esd/voh405/Makefile index 4d75868..308f752 100644 --- a/board/esd/voh405/Makefile +++ b/board/esd/voh405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index 22995b5..2857a0be 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -195,12 +195,6 @@ int misc_init_r (void) udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -340,17 +334,3 @@ void ide_set_reset(int on) } } #endif /* CONFIG_IDE_RESET */ - - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/board/esd/wuh405/Makefile b/board/esd/wuh405/Makefile index 4d75868..308f752 100644 --- a/board/esd/wuh405/Makefile +++ b/board/esd/wuh405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index 5a1a3f3..0b53062 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -170,12 +170,6 @@ int misc_init_r (void) udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -218,35 +212,8 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } /* ------------------------------------------------------------------------- */ -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index d03c05b..584f490 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -53,9 +53,13 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 + #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ @@ -132,39 +136,16 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ /*----------------------------------------------------------------------- diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 1cca285..9695211 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -81,8 +81,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -148,34 +146,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 + +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index dc40ebc..f36777a 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -130,8 +130,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - #undef CONFIG_BZIP2 /* include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -198,34 +196,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 + +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index f84e356..88cc6a4 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -135,36 +135,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 + +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index d02c39b..ef5ecba 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -81,7 +81,6 @@ #define CONFIG_SUPPORT_VFAT #define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ -#define CONFIG_AUTO_UPDATE_SHOW 1 /* use board show routine */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include @@ -156,36 +155,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ @@ -264,11 +242,6 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#if 0 /* test-only */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ -#endif - /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) @@ -294,9 +267,6 @@ #define CFG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/ /* total size of a CAT24WC16 is 2048 bytes */ -#define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ -#define CFG_NVRAM_SIZE 242 /* NVRAM size */ - /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ @@ -305,7 +275,7 @@ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */ -#if 1 /* test-only */ + /* CAT24WC08/16... */ #define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ /* mask of address bits that overflow into the "EEPROM chip address" */ @@ -313,15 +283,6 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ /* 16 byte page write mode using*/ /* last 4 bits of the address */ -#else -/* CAT24WC32/64... */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01 -#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */ - /* 32 byte page write mode using*/ - /* last 5 bits of the address */ -#endif #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ #define CFG_EEPROM_PAGE_WRITE_ENABLE diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 96f3d26..abd1ef4 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -141,36 +141,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 + +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index faf855d..52bff40 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -133,38 +133,16 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) - -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 + +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ + #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ /*----------------------------------------------------------------------- -- cgit v1.1 From 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 9 Jul 2007 10:10:08 +0200 Subject: Migrate esd 405EP boards to new NAND subsystem Remove unused CFG_NAND_LEGACY define These boards to not have NAND. Signed-off-by: Matthias Fuchs --- include/configs/CPCI405.h | 2 -- include/configs/CPCI4052.h | 2 -- include/configs/CPCI405AB.h | 3 --- include/configs/CPCI405DT.h | 2 -- 4 files changed, 9 deletions(-) diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 9acde1e..9c04129 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -83,8 +83,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 3fc99c5..2a328a6 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -105,8 +105,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 4e2e1a8..6946686 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -91,9 +91,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index ab302df..4ae240e 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -102,8 +102,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ -- cgit v1.1 From c8603cfbd4573379a6076c9c208545ba2bbf019a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 9 Jul 2007 11:00:24 +0200 Subject: Small coding style cleanup Signed-off-by: Stefan Roese --- board/esd/cpci405/cpci405.c | 1 - board/esd/wuh405/wuh405.c | 1 - 2 files changed, 2 deletions(-) diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index 2ed0fc2..2358577 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -585,7 +585,6 @@ int pci_pre_init(struct pci_controller *hose) #endif /* defined(CONFIG_PCI) */ - #ifdef CONFIG_CPCI405AB #define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index 0b53062..5fde8d6 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -216,4 +216,3 @@ long int initdram (int board_type) } /* ------------------------------------------------------------------------- */ - -- cgit v1.1 From be296e31c4411f96d9cb3d2afc8fcb006867abfa Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:24:58 -0500 Subject: Revert file mode Changed MAKEALL file mode to executable, removed executable file mode from Makefile Signed-off-by: TsiChungLiew --- MAKEALL | 0 Makefile | 0 2 files changed, 0 insertions(+), 0 deletions(-) mode change 100644 => 100755 MAKEALL mode change 100755 => 100644 Makefile diff --git a/MAKEALL b/MAKEALL old mode 100644 new mode 100755 diff --git a/Makefile b/Makefile old mode 100755 new mode 100644 -- cgit v1.1 From 48dbfeabc7afffe30609a4489f10c22cb67ef7dd Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:39:07 -0500 Subject: Create new header file and move peripherals base address from configs file to new header file. Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h. Signed-off-by: TsiChungLiew --- include/asm-m68k/immap.h | 57 ++++++++++++++++++++++++++++++++++++++++++++++ include/configs/M5329EVB.h | 46 +++++-------------------------------- 2 files changed, 63 insertions(+), 40 deletions(-) create mode 100644 include/asm-m68k/immap.h diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h new file mode 100644 index 0000000..495459e --- /dev/null +++ b/include/asm-m68k/immap.h @@ -0,0 +1,57 @@ +/* + * ColdFire Internal Memory Map and Defines + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_H +#define __IMMAP_H + +#ifdef CONFIG_M5329 +#include +#include + +#define CFG_FEC0_IOBASE (MMAP_FEC) +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x4000)) +#define CFG_MCFRTC_BASE (MMAP_RTC) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRINTR_NO (INT0_HI_DTMR1) +#define CFG_TMRINTR_MASK (INTC_IPRH_INT33) +#define CFG_TMRINTR_PRI (6) +#define CFG_TIMER_PRESCALER (((CFG_CLK / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CFG_UDELAY_BASE (MMAP_PIT0) +#define CFG_PIT_BASE (MMAP_PIT1) +#define CFG_PIT_PRESCALE (6) +#endif + +#define CFG_INTR_BASE (MMAP_INTC0) +#define CFG_NUM_IRQS (128) +#endif /* CONFIG_M5329 */ + +#endif /* __IMMAP_H */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index ac529df..c90773c 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -46,8 +46,6 @@ #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ -#define CFG_NUM_IRQS 128 - #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_CACHE | \ CFG_CMD_DATE | \ @@ -70,7 +68,6 @@ # define CFG_RX_ETH_BUFFER 8 # define CFG_FAULT_ECHO_LINK_DOWN -# define CFG_FEC0_IOBASE 0xFC030000 # define CFG_FEC0_PINMUX 0 # define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE # define MCFFEC_TOUT_LOOP 50000 @@ -86,41 +83,14 @@ #endif #define CONFIG_MCFUART -#ifdef CONFIG_MCFUART -# define CFG_UART_PORT (0) -# define CFG_UART_BASE (0xFC060000) -#endif +#define CFG_UART_PORT (0) #define CONFIG_MCFRTC -#ifdef CONFIG_MCFRTC -# define CFG_MCFRTC_BASE (0xFC0A8000) -# undef RTC_DEBUG -#endif +#undef RTC_DEBUG /* Timer */ #define CONFIG_MCFTMR -#ifdef CONFIG_MCFTMR -# define CFG_UDELAY_BASE (0xFC070000) -# define CFG_TMR_BASE (0xFC074000) -# define CFG_TMRINTR_NO (33) -# define CFG_TMRINTR_MASK (2) -# define CFG_TMRINTR_PRI (6) -# define CFG_TIMER_PRESCALER (((CFG_CLK / 1000000) - 1) << 8) -#endif - #undef CONFIG_MCFPIT -#ifdef CONFIG_MCFPIT -# define CFG_UDELAY_BASE (0xFC080000) -# define CFG_PIT_BASE (0xFC084000) -# define CFG_PIT_PRESCALE (6) -#endif - -#define CONFIG_MCFINTC -#ifdef CONFIG_MCFINTC -# define CFG_INTR_BASE (0xFC048000) -# define CFG_NUM_IRQ0 64 -# define CFG_NUM_IRQ1 64 -#endif /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include @@ -215,22 +185,18 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#undef CFG_FLASH_CFI +#define CFG_FLASH_CFI #ifdef CFG_FLASH_CFI # define CFG_FLASH_CFI_DRIVER 1 # define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ # define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#else -# define CFG_FLASH_UNLOCK_TOUT 1000 -# define CFG_FLASH_WRITE_TOUT 1000 +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #endif #define CFG_FLASH_BASE 0 #define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 1000 -#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash -- cgit v1.1 From 514871f565dd8bd1121e4a3ac1665a790e20b8f2 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:41:24 -0500 Subject: Clean up Replaced whitespace with tabs Signed-off-by: TsiChungLiew --- include/asm-m68k/immap_5329.h | 80 +++++++++++++++++++++---------------------- 1 file changed, 40 insertions(+), 40 deletions(-) diff --git a/include/asm-m68k/immap_5329.h b/include/asm-m68k/immap_5329.h index 5ef1265..2a3980c 100644 --- a/include/asm-m68k/immap_5329.h +++ b/include/asm-m68k/immap_5329.h @@ -26,46 +26,46 @@ #ifndef __IMMAP_5329__ #define __IMMAP_5329__ -#define MMAP_SCM1 0xEC000000 -#define MMAP_MDHA 0xEC080000 -#define MMAP_SKHA 0xEC084000 -#define MMAP_RNG 0xEC088000 -#define MMAP_SCM2 0xFC000000 -#define MMAP_XBS 0xFC004000 -#define MMAP_FBCS 0xFC008000 -#define MMAP_CAN 0xFC020000 -#define MMAP_FEC 0xFC030000 -#define MMAP_SCM3 0xFC040000 -#define MMAP_EDMA 0xFC044000 -#define MMAP_TCD 0xFC045000 -#define MMAP_INTC0 0xFC048000 -#define MMAP_INTC1 0xFC04C000 -#define MMAP_INTCACK 0xFC054000 -#define MMAP_I2C 0xFC058000 -#define MMAP_QSPI 0xFC05C000 -#define MMAP_UART0 0xFC060000 -#define MMAP_UART1 0xFC064000 -#define MMAP_UART2 0xFC068000 -#define MMAP_DTMR0 0xFC070000 -#define MMAP_DTMR1 0xFC074000 -#define MMAP_DTMR2 0xFC078000 -#define MMAP_DTMR3 0xFC07C000 -#define MMAP_PIT0 0xFC080000 -#define MMAP_PIT1 0xFC084000 -#define MMAP_PIT2 0xFC088000 -#define MMAP_PIT3 0xFC08C000 -#define MMAP_PWM 0xFC090000 -#define MMAP_EPORT 0xFC094000 -#define MMAP_WDOG 0xFC098000 -#define MMAP_CCM 0xFC0A0000 -#define MMAP_GPIO 0xFC0A4000 -#define MMAP_RTC 0xFC0A8000 -#define MMAP_LCDC 0xFC0AC000 -#define MMAP_USBOTG 0xFC0B0000 -#define MMAP_USBH 0xFC0B4000 -#define MMAP_SDRAM 0xFC0B8000 -#define MMAP_SSI 0xFC0BC000 -#define MMAP_PLL 0xFC0C0000 +#define MMAP_SCM1 0xEC000000 +#define MMAP_MDHA 0xEC080000 +#define MMAP_SKHA 0xEC084000 +#define MMAP_RNG 0xEC088000 +#define MMAP_SCM2 0xFC000000 +#define MMAP_XBS 0xFC004000 +#define MMAP_FBCS 0xFC008000 +#define MMAP_CAN 0xFC020000 +#define MMAP_FEC 0xFC030000 +#define MMAP_SCM3 0xFC040000 +#define MMAP_EDMA 0xFC044000 +#define MMAP_TCD 0xFC045000 +#define MMAP_INTC0 0xFC048000 +#define MMAP_INTC1 0xFC04C000 +#define MMAP_INTCACK 0xFC054000 +#define MMAP_I2C 0xFC058000 +#define MMAP_QSPI 0xFC05C000 +#define MMAP_UART0 0xFC060000 +#define MMAP_UART1 0xFC064000 +#define MMAP_UART2 0xFC068000 +#define MMAP_DTMR0 0xFC070000 +#define MMAP_DTMR1 0xFC074000 +#define MMAP_DTMR2 0xFC078000 +#define MMAP_DTMR3 0xFC07C000 +#define MMAP_PIT0 0xFC080000 +#define MMAP_PIT1 0xFC084000 +#define MMAP_PIT2 0xFC088000 +#define MMAP_PIT3 0xFC08C000 +#define MMAP_PWM 0xFC090000 +#define MMAP_EPORT 0xFC094000 +#define MMAP_WDOG 0xFC098000 +#define MMAP_CCM 0xFC0A0000 +#define MMAP_GPIO 0xFC0A4000 +#define MMAP_RTC 0xFC0A8000 +#define MMAP_LCDC 0xFC0AC000 +#define MMAP_USBOTG 0xFC0B0000 +#define MMAP_USBH 0xFC0B4000 +#define MMAP_SDRAM 0xFC0B8000 +#define MMAP_SSI 0xFC0BC000 +#define MMAP_PLL 0xFC0C0000 /* System control module registers */ typedef struct scm1_ctrl { -- cgit v1.1 From 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:42:23 -0500 Subject: Clean up Removed whitespace Signed-off-by: TsiChungLiew --- include/asm-m68k/io.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index cec25d0..8dea02a 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -23,7 +23,7 @@ * MA 02111-1307 USA */ - #ifndef __ASM_M68K_IO_H__ +#ifndef __ASM_M68K_IO_H__ #define __ASM_M68K_IO_H__ #include -- cgit v1.1 From 2bd58608dbcff8890ca9a0c59e861ac24f8bb230 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:45:01 -0500 Subject: Seperate old structure defines and new structure defines New timer structure and defines will move to new timer.h Signed-off-by: TsiChungLiew --- include/asm-m68k/mcftimer.h | 72 --------------------------------------------- 1 file changed, 72 deletions(-) diff --git a/include/asm-m68k/mcftimer.h b/include/asm-m68k/mcftimer.h index 988860d..381f4eb 100644 --- a/include/asm-m68k/mcftimer.h +++ b/include/asm-m68k/mcftimer.h @@ -108,76 +108,4 @@ #define MCFTIMER_PCSR_DOZE 0x0040 /****************************************************************************/ -/* New Timer structure */ -/****************************************************************************/ -/* DMA Timer module registers */ -typedef struct dtimer_ctrl { - u16 tmr; /* 0x00 Mode register */ - u8 txmr; /* 0x02 Extended Mode register */ - u8 ter; /* 0x03 Event register */ - u32 trr; /* 0x04 Reference register */ - u32 tcr; /* 0x08 Capture register */ - u32 tcn; /* 0x0C Counter register */ -} dtmr_t; - -/*Programmable Interrupt Timer */ -typedef struct pit_ctrl { - u16 pcsr; /* 0x00 Control and Status Register */ - u16 pmr; /* 0x02 Modulus Register */ - u16 pcntr; /* 0x04 Count Register */ -} pit_t; - -/********************************************************************* -* DMA Timers (DTIM) -*********************************************************************/ -/* Bit definitions and macros for DTMR */ -#define DTIM_DTMR_RST (0x0001) /* Reset */ -#define DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) /* Input clock source */ -#define DTIM_DTMR_FRR (0x0008) /* Free run/restart */ -#define DTIM_DTMR_ORRI (0x0010) /* Output reference request/interrupt enable */ -#define DTIM_DTMR_OM (0x0020) /* Output Mode */ -#define DTIM_DTMR_CE(x) (((x)&0x0003)<<6) /* Capture Edge */ -#define DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) /* Prescaler value */ -#define DTIM_DTMR_RST_EN (0x0001) -#define DTIM_DTMR_RST_RST (0x0000) -#define DTIM_DTMR_CE_ANY (0x00C0) -#define DTIM_DTMR_CE_FALL (0x0080) -#define DTIM_DTMR_CE_RISE (0x0040) -#define DTIM_DTMR_CE_NONE (0x0000) -#define DTIM_DTMR_CLK_DTIN (0x0006) -#define DTIM_DTMR_CLK_DIV16 (0x0004) -#define DTIM_DTMR_CLK_DIV1 (0x0002) -#define DTIM_DTMR_CLK_STOP (0x0000) - -/* Bit definitions and macros for DTXMR */ -#define DTIM_DTXMR_MODE16 (0x01) /* Increment Mode */ -#define DTIM_DTXMR_DMAEN (0x80) /* DMA request */ - -/* Bit definitions and macros for DTER */ -#define DTIM_DTER_CAP (0x01) /* Capture event */ -#define DTIM_DTER_REF (0x02) /* Output reference event */ - -/********************************************************************* -* -* Programmable Interrupt Timer Modules (PIT) -* -*********************************************************************/ - -/* Bit definitions and macros for PCSR */ -#define PIT_PCSR_EN (0x0001) -#define PIT_PCSR_RLD (0x0002) -#define PIT_PCSR_PIF (0x0004) -#define PIT_PCSR_PIE (0x0008) -#define PIT_PCSR_OVW (0x0010) -#define PIT_PCSR_HALTED (0x0020) -#define PIT_PCSR_DOZE (0x0040) -#define PIT_PCSR_PRE(x) (((x)&0x000F)<<8) - -/* Bit definitions and macros for PMR */ -#define PIT_PMR_PM(x) (x) - -/* Bit definitions and macros for PCNTR */ -#define PIT_PCNTR_PC(x) (x) - -/****************************************************************************/ #endif /* mcftimer_h */ -- cgit v1.1 From 2744354a8437b8f78db178e30660215688bff570 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:46:38 -0500 Subject: Seperate old structure defines and new structure defines Removed new uart structure and defines to uart.h Signed-off-by: TsiChungLiew --- include/asm-m68k/mcfuart.h | 144 --------------------------------------------- 1 file changed, 144 deletions(-) diff --git a/include/asm-m68k/mcfuart.h b/include/asm-m68k/mcfuart.h index 43b49a8..1ccc43f 100644 --- a/include/asm-m68k/mcfuart.h +++ b/include/asm-m68k/mcfuart.h @@ -215,147 +215,3 @@ #define MCFUART_URF_FULL 0x20 /* receiver fifo full */ #define MCFUART_URF_RXS 0xc0 /* receiver status */ #endif - -#ifdef CONFIG_MCFUART -/* UART module registers */ -/* Register read/write struct */ -typedef struct uart { - u8 umr; /* 0x00 Mode Register */ - u8 resv0[0x3]; - union { - u8 usr; /* 0x04 Status Register */ - u8 ucsr; /* 0x04 Clock Select Register */ - }; - u8 resv1[0x3]; - u8 ucr; /* 0x08 Command Register */ - u8 resv2[0x3]; - union { - u8 utb; /* 0x0c Transmit Buffer */ - u8 urb; /* 0x0c Receive Buffer */ - }; - u8 resv3[0x3]; - union { - u8 uipcr; /* 0x10 Input Port Change Register */ - u8 uacr; /* 0x10 Auxiliary Control reg */ - }; - u8 resv4[0x3]; - union { - u8 uimr; /* 0x14 Interrupt Mask reg */ - u8 uisr; /* 0x14 Interrupt Status reg */ - }; - u8 resv5[0x3]; - u8 ubg1; /* 0x18 Counter Timer Upper Register */ - u8 resv6[0x3]; - u8 ubg2; /* 0x1c Counter Timer Lower Register */ - u8 resv7[0x17]; - u8 uip; /* 0x34 Input Port Register */ - u8 resv8[0x3]; - u8 uop1; /* 0x38 Output Port Set Register */ - u8 resv9[0x3]; - u8 uop0; /* 0x3c Output Port Reset Register */ -} uart_t; - -/********************************************************************* -* Universal Asynchronous Receiver Transmitter (UART) -*********************************************************************/ -/* Bit definitions and macros for UMR */ -#define UART_UMR_BC(x) (((x)&0x03)) -#define UART_UMR_PT (0x04) -#define UART_UMR_PM(x) (((x)&0x03)<<3) -#define UART_UMR_ERR (0x20) -#define UART_UMR_RXIRQ (0x40) -#define UART_UMR_RXRTS (0x80) -#define UART_UMR_SB(x) (((x)&0x0F)) -#define UART_UMR_TXCTS (0x10) /* Trsnsmit CTS */ -#define UART_UMR_TXRTS (0x20) /* Transmit RTS */ -#define UART_UMR_CM(x) (((x)&0x03)<<6) /* CM bits */ -#define UART_UMR_PM_MULTI_ADDR (0x1C) -#define UART_UMR_PM_MULTI_DATA (0x18) -#define UART_UMR_PM_NONE (0x10) -#define UART_UMR_PM_FORCE_HI (0x0C) -#define UART_UMR_PM_FORCE_LO (0x08) -#define UART_UMR_PM_ODD (0x04) -#define UART_UMR_PM_EVEN (0x00) -#define UART_UMR_BC_5 (0x00) -#define UART_UMR_BC_6 (0x01) -#define UART_UMR_BC_7 (0x02) -#define UART_UMR_BC_8 (0x03) -#define UART_UMR_CM_NORMAL (0x00) -#define UART_UMR_CM_ECH (0x40) -#define UART_UMR_CM_LOCAL_LOOP (0x80) -#define UART_UMR_CM_REMOTE_LOOP (0xC0) -#define UART_UMR_SB_STOP_BITS_1 (0x07) -#define UART_UMR_SB_STOP_BITS_15 (0x08) -#define UART_UMR_SB_STOP_BITS_2 (0x0F) - -/* Bit definitions and macros for USR */ -#define UART_USR_RXRDY (0x01) -#define UART_USR_FFULL (0x02) -#define UART_USR_TXRDY (0x04) -#define UART_USR_TXEMP (0x08) -#define UART_USR_OE (0x10) -#define UART_USR_PE (0x20) -#define UART_USR_FE (0x40) -#define UART_USR_RB (0x80) - -/* Bit definitions and macros for UCSR */ -#define UART_UCSR_TCS(x) (((x)&0x0F)) -#define UART_UCSR_RCS(x) (((x)&0x0F)<<4) -#define UART_UCSR_RCS_SYS_CLK (0xD0) -#define UART_UCSR_RCS_CTM16 (0xE0) -#define UART_UCSR_RCS_CTM (0xF0) -#define UART_UCSR_TCS_SYS_CLK (0x0D) -#define UART_UCSR_TCS_CTM16 (0x0E) -#define UART_UCSR_TCS_CTM (0x0F) - -/* Bit definitions and macros for UCR */ -#define UART_UCR_RXC(x) (((x)&0x03)) -#define UART_UCR_TXC(x) (((x)&0x03)<<2) -#define UART_UCR_MISC(x) (((x)&0x07)<<4) -#define UART_UCR_NONE (0x00) -#define UART_UCR_STOP_BREAK (0x70) -#define UART_UCR_START_BREAK (0x60) -#define UART_UCR_BKCHGINT (0x50) -#define UART_UCR_RESET_ERROR (0x40) -#define UART_UCR_RESET_TX (0x30) -#define UART_UCR_RESET_RX (0x20) -#define UART_UCR_RESET_MR (0x10) -#define UART_UCR_TX_DISABLED (0x08) -#define UART_UCR_TX_ENABLED (0x04) -#define UART_UCR_RX_DISABLED (0x02) -#define UART_UCR_RX_ENABLED (0x01) - -/* Bit definitions and macros for UIPCR */ -#define UART_UIPCR_CTS (0x01) -#define UART_UIPCR_COS (0x10) - -/* Bit definitions and macros for UACR */ -#define UART_UACR_IEC (0x01) - -/* Bit definitions and macros for UIMR */ -#define UART_UIMR_TXRDY (0x01) -#define UART_UIMR_RXRDY_FU (0x02) -#define UART_UIMR_DB (0x04) -#define UART_UIMR_COS (0x80) - -/* Bit definitions and macros for UISR */ -#define UART_UISR_TXRDY (0x01) -#define UART_UISR_RXRDY_FU (0x02) -#define UART_UISR_DB (0x04) -#define UART_UISR_RXFTO (0x08) -#define UART_UISR_TXFIFO (0x10) -#define UART_UISR_RXFIFO (0x20) -#define UART_UISR_COS (0x80) - -/* Bit definitions and macros for UIP */ -#define UART_UIP_CTS (0x01) - -/* Bit definitions and macros for UOP1 */ -#define UART_UOP1_RTS (0x01) - -/* Bit definitions and macros for UOP0 */ -#define UART_UOP0_RTS (0x01) -#endif /* CONFIG_MCFUART */ - -/****************************************************************************/ -#endif /* mcfuart_h */ -- cgit v1.1 From 01a793fda09c63df5a496f09dc1c7cb26e6751a2 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:51:05 -0500 Subject: Duplicate code There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file. Signed-off-by: TsiChungLiew --- board/freescale/m5329evb/flash.c | 643 --------------------------------------- 1 file changed, 643 deletions(-) delete mode 100644 board/freescale/m5329evb/flash.c diff --git a/board/freescale/m5329evb/flash.c b/board/freescale/m5329evb/flash.c deleted file mode 100644 index 7d3b0e8..0000000 --- a/board/freescale/m5329evb/flash.c +++ /dev/null @@ -1,643 +0,0 @@ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#ifndef CFG_FLASH_CFI - -typedef unsigned short FLASH_PORT_WIDTH; -typedef volatile unsigned short FLASH_PORT_WIDTHV; - -#define PHYS_FLASH_1 CFG_FLASH_BASE -#define FLASH_BANK_SIZE 0x200000 - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -/* Intel-compatible flash commands */ -#define INTEL_PROGRAM 0x00100010 -#define INTEL_ERASE 0x00200020 -#define INTEL_WRSETUP 0x00400040 -#define INTEL_CLEAR 0x00500050 -#define INTEL_LOCKBIT 0x00600060 -#define INTEL_PROTECT 0x00010001 -#define INTEL_STATUS 0x00700070 -#define INTEL_READID 0x00900090 -#define INTEL_CFIQRY 0x00980098 -#define INTEL_SUSERASE 0x00B000B0 -#define INTEL_PROTPROG 0x00C000C0 -#define INTEL_CONFIRM 0x00D000D0 -#define INTEL_RESET 0x00FF00FF - -/* Intel-compatible flash status bits */ -#define INTEL_FINISHED 0x00800080 -#define INTEL_OK 0x00800080 -#define INTEL_ERASESUS 0x00600060 -#define INTEL_WSM_SUS (INTEL_FINISHED | INTEL_ERASESUS) - -/* 28F160C3B CFI Data offset - This could vary */ -#define INTEL_CFI_MFG 0x00 /* Manufacturer ID */ -#define INTEL_CFI_PART 0x01 /* Product ID */ -#define INTEL_CFI_LOCK 0x02 /* */ -#define INTEL_CFI_TWPRG 0x1F /* Typical Single Word Program Timeout 2^n us */ -#define INTEL_CFI_MBUFW 0x20 /* Typical Max Buffer Write Timeout 2^n us */ -#define INTEL_CFI_TERB 0x21 /* Typical Block Erase Timeout 2^n ms */ -#define INTEL_CFI_MWPRG 0x23 /* Maximum Word program timeout 2^n us */ -#define INTEL_CFI_MERB 0x25 /* Maximum Block Erase Timeout 2^n s */ -#define INTEL_CFI_SIZE 0x27 /* Device size 2^n bytes */ -#define INTEL_CFI_BANK 0x2C /* Number of Bank */ -#define INTEL_CFI_SZ1A 0x2F /* Block Region Size */ -#define INTEL_CFI_SZ1B 0x30 -#define INTEL_CFI_SZ2A 0x33 -#define INTEL_CFI_SZ2B 0x34 -#define INTEL_CFI_BLK1 0x2D /* Number of Blocks */ -#define INTEL_CFI_BLK2 0x31 - -#define WR_BLOCK 0x20 - -#define SYNC __asm__("nop") - -/*----------------------------------------------------------------------- - * Functions - */ - -ulong flash_get_size(FPWV * addr, flash_info_t * info); -int flash_get_offsets(ulong base, flash_info_t * info); -int flash_cmd_rd(FPWV * addr, int index); -int write_data(flash_info_t * info, ulong dest, FPW data); -void flash_sync_real_protect(flash_info_t * info); -uchar intel_sector_protected(flash_info_t * info, ushort sector); - -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; - -ulong flash_init(void) -{ - FPWV *flash_addr[CFG_MAX_FLASH_BANKS]; - ulong size; - int i; - - flash_addr[0] = (FPW *) CFG_FLASH0_BASE; -#ifdef CFG_FLASH1_BASE - flash_addr[1] = (FPW *) CFG_FLASH1_BASE; -#endif - - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { - memset(&flash_info[i], 0, sizeof(flash_info_t)); - - size = flash_get_size(flash_addr[i], &flash_info[i]); - flash_protect(FLAG_PROTECT_CLEAR, - flash_info[i].start[0], - flash_info[i].start[0] + size - 1, - &flash_info[0]); - /* get the h/w and s/w protection status in sync */ - flash_sync_real_protect(&flash_info[i]); - } - - /* Protect monitor and environment sectors */ - flash_protect(FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); - - return size; -} - -void flash_print_info(flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf("INTEL "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F160C3B: - printf("28F160C3B\n"); - break; - case FLASH_28F160C3T: - printf("28F160C3T\n"); - break; - case FLASH_28F320C3B: - printf("28F320C3B\n"); - break; - case FLASH_28F320C3T: - printf("28F320C3T\n"); - break; - case FLASH_28F640C3B: - printf("28F640C3B\n"); - break; - case FLASH_28F640C3T: - printf("28F640C3T\n"); - break; - default: - printf("Unknown Chip Type\n"); - return; - } - - if (info->size > 0x100000) { - int remainder; - - printf(" Size: %ld", info->size >> 20); - - remainder = (info->size % 0x100000); - if (remainder) { - remainder >>= 10; - remainder = (int)((float) - (((float)remainder / (float)1024) * - 10000)); - printf(".%d ", remainder); - } - - printf("MB in %d Sectors\n", info->sector_count); - } else - printf(" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf("\n"); -} - -/* - * The following code cannot be run from FLASH! - */ -ulong flash_get_size(FPWV * addr, flash_info_t * info) -{ - int intel = 0; - u16 value; - static int bank = 0; - - /* Write auto select command: read Manufacturer ID */ - /* Write auto select command sequence and test FLASH answer */ - *addr = (FPW) INTEL_RESET; /* restore read mode */ - *addr = (FPW) INTEL_READID; - - switch (addr[INTEL_CFI_MFG] & 0xff) { - case (ushort) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - value = addr[INTEL_CFI_PART]; - intel = 1; - break; - default: - printf("Unknown Flash\n"); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - *addr = (FPW) INTEL_RESET; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - switch (value) { - case (u16) INTEL_ID_28F160C3B: - info->flash_id += FLASH_28F160C3B; - break; - case (u16) INTEL_ID_28F160C3T: - info->flash_id += FLASH_28F160C3T; - break; - case (u16) INTEL_ID_28F320C3B: - info->flash_id += FLASH_28F320C3B; - break; - case (u16) INTEL_ID_28F320C3T: - info->flash_id += FLASH_28F320C3T; - break; - case (u16) INTEL_ID_28F640C3B: - info->flash_id += FLASH_28F640C3B; - break; - case (u16) INTEL_ID_28F640C3T: - info->flash_id += FLASH_28F640C3T; - break; - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (intel) { - /* Intel spec. under CFI section */ - u32 sz, size, offset; - int sec, sectors, bs; - int part, i, j, cnt; - - part = flash_cmd_rd(addr, INTEL_CFI_BANK); - - /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. - * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count - * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count - */ - offset = (u32) addr; - sectors = sec = 0; - size = sz = cnt = 0; - for (i = 0; i < part; i++) { - bs = (((addr[INTEL_CFI_SZ1B + i * 4] << 8) | - addr[INTEL_CFI_SZ1A + i * 4]) * 0x100); - sec = addr[INTEL_CFI_BLK1 + i * 4] + 1; - sz = bs * sec; - - for (j = 0; j < sec; j++) { - info->start[cnt++] = offset; - offset += bs; - } - - sectors += sec; - size += sz; - } - info->sector_count = sectors; - info->size = size; - } - - if (info->sector_count > CFG_MAX_FLASH_SECT) { - printf("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CFG_MAX_FLASH_SECT); - info->sector_count = CFG_MAX_FLASH_SECT; - } - - *addr = (FPW) INTEL_RESET; /* restore read mode */ - - return (info->size); -} - -int flash_cmd_rd(FPWV * addr, int index) -{ - return (int)addr[index]; -} - -/* - * This function gets the u-boot flash sector protection status - * (flash_info_t.protect[]) in sync with the sector protection - * status stored in hardware. - */ -void flash_sync_real_protect(flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F160C3B: - case FLASH_28F160C3T: - case FLASH_28F320C3B: - case FLASH_28F320C3T: - case FLASH_28F640C3B: - case FLASH_28F640C3T: - for (i = 0; i < info->sector_count; ++i) { - info->protect[i] = intel_sector_protected(info, i); - } - break; - default: - /* no h/w protect support */ - break; - } -} - -/* - * checks if "sector" in bank "info" is protected. Should work on intel - * strata flash chips 28FxxxJ3x in 8-bit mode. - * Returns 1 if sector is protected (or timed-out while trying to read - * protection status), 0 if it is not. - */ -uchar intel_sector_protected(flash_info_t * info, ushort sector) -{ - FPWV *addr; - FPWV *lock_conf_addr; - ulong start; - unsigned char ret; - - /* - * first, wait for the WSM to be finished. The rationale for - * waiting for the WSM to become idle for at most - * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy - * because of: (1) erase, (2) program or (3) lock bit - * configuration. So we just wait for the longest timeout of - * the (1)-(3), i.e. the erase timeout. - */ - - /* wait at least 35ns (W12) before issuing Read Status Register */ - /*udelay(1); */ - addr = (FPWV *) info->start[sector]; - *addr = (FPW) INTEL_STATUS; - - start = get_timer(0); - while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { - if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) { - *addr = (FPW) INTEL_RESET; /* restore read mode */ - printf("WSM busy too long, can't get prot status\n"); - return 1; - } - } - - /* issue the Read Identifier Codes command */ - *addr = (FPW) INTEL_READID; - - /* Intel example code uses offset of 4 for 8-bit flash */ - lock_conf_addr = (FPWV *) info->start[sector]; - ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0; - - /* put flash back in read mode */ - *addr = (FPW) INTEL_RESET; - - return ret; -} - -int flash_erase(flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start, last; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf("- missing\n"); - else - printf("- no sectors to erase\n"); - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - type = (info->flash_id & FLASH_VENDMASK); - printf("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - else - printf("\n"); - - start = get_timer(0); - last = start; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - - FPWV *addr = (FPWV *) (info->start[sect]); - int min = 0; - - printf("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - *addr = (FPW) INTEL_READID; - min = addr[INTEL_CFI_TERB]; - min = 1 << min; /* ms */ - min = (min / info->sector_count) * 1000; - - /* start erase block */ - *addr = (FPW) INTEL_CLEAR; /* clear status register */ - *addr = (FPW) INTEL_ERASE; /* erase setup */ - *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ - - while ((*addr & (FPW) INTEL_FINISHED) != - (FPW) INTEL_FINISHED) { - - if (get_timer(start) > CFG_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - *addr = (FPW) INTEL_SUSERASE; /* suspend erase */ - *addr = (FPW) INTEL_RESET; /* reset to read mode */ - - rcode = 1; - break; - } - } - - *addr = (FPW) INTEL_RESET; /* resest to read mode */ - - printf(" done\n"); - } - } - - return rcode; -} - -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - if (info->flash_id == FLASH_UNKNOWN) - return 4; - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - { - ulong cp, wp; - FPW data; - int i, l, rc, port_width; - - /* get lower word aligned address */ - wp = addr; - port_width = 1; - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - - for (; cnt == 0 && i < port_width; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - if ((rc = write_data(info, wp, data)) != 0) - return (rc); - - wp += port_width; - } - - /* handle word aligned part */ - while (cnt >= 2) { - data = *((FPW *) src); - - if ((rc = - write_data(info, (ulong) ((FPWV *) wp), - (FPW) data)) != 0) { - return (rc); - } - - src += sizeof(FPW); - wp += sizeof(FPW); - cnt -= sizeof(FPW); - } - - if (cnt == 0) - return ERR_OK; - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i < 2; ++i, ++cp) { - data |= (*(uchar *) cp); - } - - return write_data(info, (ulong) ((FPWV *) wp), - (FPW) data); - - } /* case FLASH_MAN_INTEL */ - - } /* switch */ - - return ERR_OK; -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_data(flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf("not erased at %08lx (%lx)\n", (ulong) addr, - (ulong) * addr); - return (2); - } - - /* Disable interrupts which might cause a timeout here */ - flag = (int)disable_interrupts(); - - *addr = (FPW) INTEL_CLEAR; - *addr = (FPW) INTEL_RESET; - - *addr = (FPW) INTEL_WRSETUP; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - *addr = (FPW) INTEL_SUSERASE; /* suspend mode */ - *addr = (FPW) INTEL_CLEAR; /* clear status */ - *addr = (FPW) INTEL_RESET; /* reset */ - return (1); - } - } - - *addr = (FPW) INTEL_CLEAR; /* clear status */ - *addr = (FPW) INTEL_RESET; /* restore read mode */ - - return (0); -} - -#ifdef CFG_FLASH_PROTECTION -/*----------------------------------------------------------------------- - */ -int flash_real_protect(flash_info_t * info, long sector, int prot) -{ - int rcode = 0; /* assume success */ - FPWV *addr; /* address of sector */ - FPW value; - - addr = (FPWV *) (info->start[sector]); - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F160C3B: - case FLASH_28F160C3T: - case FLASH_28F320C3B: - case FLASH_28F320C3T: - case FLASH_28F640C3B: - case FLASH_28F640C3T: - *addr = (FPW) INTEL_RESET; /* make sure in read mode */ - *addr = (FPW) INTEL_LOCKBIT; /* lock command setup */ - - if (prot) - *addr = (FPW) INTEL_PROTECT; /* lock sector */ - else - *addr = (FPW) INTEL_CONFIRM; /* unlock sector */ - - /* now see if it really is locked/unlocked as requested */ - *addr = (FPW) INTEL_READID; - - /* read sector protection at sector address, (A7 .. A0) = 0x02. - * D0 = 1 for each device if protected. - * If at least one device is protected the sector is marked - * protected, but return failure. Mixed protected and - * unprotected devices within a sector should never happen. - */ - value = addr[2] & (FPW) INTEL_PROTECT; - if (value == 0) - info->protect[sector] = 0; - else if (value == (FPW) INTEL_PROTECT) - info->protect[sector] = 1; - else { - /* error, mixed protected and unprotected */ - rcode = 1; - info->protect[sector] = 1; - } - if (info->protect[sector] != prot) - rcode = 1; /* failed to protect/unprotect as requested */ - - /* reload all protection bits from hardware for now */ - flash_sync_real_protect(info); - break; - - default: - /* no hardware protect that we support */ - info->protect[sector] = prot; - break; - } - - return rcode; -} -#endif /* CFG_FLASH_PROTECTION */ -#endif /* CFG_FLASH_CFI */ -- cgit v1.1 From 427c814104560e29bda14955c67703245aaaa5b4 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:54:42 -0500 Subject: Removed MII functions and replaced immap_5329.h and m5329.h with immap.h. The removed MII routines will be placed in mii.c. Signed-off-by: TsiChungLiew --- board/freescale/m5329evb/m5329evb.c | 285 +----------------------------------- 1 file changed, 3 insertions(+), 282 deletions(-) diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c index 4ccea30..07a02c2 100644 --- a/board/freescale/m5329evb/m5329evb.c +++ b/board/freescale/m5329evb/m5329evb.c @@ -24,13 +24,9 @@ * MA 02111-1307 USA */ -#include -#include -#include -#include - #include -#include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -97,280 +93,5 @@ void sync(void) /* This sync function is PowerPC intruction, coldfire does not have this instruction. Dummy function */ } -#endif - -#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - if (setclear) { - gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; - gpio->par_feci2c |= - GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; - } else { - gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); - } - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII) -#include - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18) | \ - (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - strcpy(info->phy_name, - STR_ID_DP83848VV); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - printf(STR_ID_DP83848VV); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, - unsigned char reg, unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, - unsigned char reg, unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} +#endif /* CFG_FLASH_CFI */ -#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ -- cgit v1.1 From c5ded275d839e4ff79f41718d50a835d989f57bc Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:56:19 -0500 Subject: MII functions calls. Signed-off-by: TsiChungLiew --- board/freescale/m5329evb/mii.c | 304 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 304 insertions(+) create mode 100644 board/freescale/m5329evb/mii.c diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c new file mode 100644 index 0000000..691b144 --- /dev/null +++ b/board/freescale/m5329evb/mii.c @@ -0,0 +1,304 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; + gpio->par_feci2c |= + GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; + } else { + gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + strcpy(info->phy_name, + STR_ID_DP83848VV); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + printf(STR_ID_DP83848VV); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +void mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ -- cgit v1.1 From 3b635492c95bd0d6e08f93f699821cba1f602a64 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:57:46 -0500 Subject: Update for flash.o and mii.o Removed flash.o and added mii.o Signed-off-by: TsiChungLiew --- board/freescale/m5329evb/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile index f94ee9d..74c2528 100644 --- a/board/freescale/m5329evb/Makefile +++ b/board/freescale/m5329evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -- cgit v1.1 From 7a17e759c7a8b58e910daf54df611e94fc8ca074 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:01:22 -0500 Subject: Update header file and removed interrupt_init() Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c Signed-off-by: TsiChungLiew --- cpu/mcf532x/cpu.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-) diff --git a/cpu/mcf532x/cpu.c b/cpu/mcf532x/cpu.c index 071c503..520f5d6 100644 --- a/cpu/mcf532x/cpu.c +++ b/cpu/mcf532x/cpu.c @@ -29,8 +29,7 @@ #include #include -#include -#include +#include int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) { @@ -117,18 +116,4 @@ int watchdog_init(void) return (0); } -#endif /* #ifdef CONFIG_WATCHDOG */ - -#ifdef CONFIG_MCFINTC -int interrupt_init(void) -{ - volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); - - /* Make sure all interrupts are disabled */ - intp->imrh0 |= 0xFFFFFFFF; - intp->imrl0 |= 0xFFFFFFFF; - - enable_interrupts(); - return 0; -} -#endif /* CONFIG_MCFINTC */ +#endif /* CONFIG_WATCHDOG */ -- cgit v1.1 From 84a015b52ec820a5ae173717d78516de731c89c2 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:03:28 -0500 Subject: Update header file and enable icache Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r(). Signed-off-by: TsiChungLiew --- cpu/mcf532x/cpu_init.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index 6319658..b056fbe 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -3,7 +3,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * (C) Copyright 2007 + * (C) Copyright 2007 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -28,8 +28,7 @@ #include #include -#include -#include +#include /* * Breath some life into the CPU... @@ -121,6 +120,6 @@ void cpu_init_f(void) */ int cpu_init_r(void) { - /*icache_enable(); */ + icache_enable(); return (0); } -- cgit v1.1 From b9bf3de377b2bae70c983c9b97feae914999e735 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:05:31 -0500 Subject: Update header file and some clean up Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces. Signed-off-by: TsiChungLiew --- cpu/mcf532x/speed.c | 30 ++++++++++++------------------ 1 file changed, 12 insertions(+), 18 deletions(-) diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c index c4ba7ec..cf72609 100644 --- a/cpu/mcf532x/speed.c +++ b/cpu/mcf532x/speed.c @@ -28,23 +28,22 @@ #include #include -#include -#include +#include /* PLL min/max specifications */ -#define MAX_FVCO 500000 /* KHz */ -#define MAX_FSYS 80000 /* KHz */ -#define MIN_FSYS 58333 /* KHz */ -#define FREF 16000 /* KHz */ -#define MAX_MFD 135 /* Multiplier */ -#define MIN_MFD 88 /* Multiplier */ -#define BUSDIV 6 /* Divider */ +#define MAX_FVCO 500000 /* KHz */ +#define MAX_FSYS 80000 /* KHz */ +#define MIN_FSYS 58333 /* KHz */ +#define FREF 16000 /* KHz */ +#define MAX_MFD 135 /* Multiplier */ +#define MIN_MFD 88 /* Multiplier */ +#define BUSDIV 6 /* Divider */ /* * Low Power Divider specifications */ -#define MIN_LPD (1 << 0) /* Divider (not encoded) */ -#define MAX_LPD (1 << 15) /* Divider (not encoded) */ -#define DEFAULT_LPD (1 << 1) /* Divider (not encoded) */ +#define MIN_LPD (1 << 0) /* Divider (not encoded) */ +#define MAX_LPD (1 << 15) /* Divider (not encoded) */ +#define DEFAULT_LPD (1 << 1) /* Divider (not encoded) */ /* * Get the value of the current system clock @@ -174,9 +173,6 @@ int clock_pll(int fsys, int flags) * If it has then the SDRAM needs to be put into self refresh * mode before reprogramming the PLL. */ - /* Put SDRAM into self refresh mode */ -/* if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF) - MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_CKE;*/ /* * Initialize the PLL to generate the new system clock frequency. @@ -197,12 +193,10 @@ int clock_pll(int fsys, int flags) /* * Return the SDRAM to normal operation if it is in use. */ - /* Exit self refresh mode */ -/* if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF) - MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_CKE;*/ /* software workaround for SDRAM opeartion after exiting LIMP mode errata */ *sdram_workaround = CFG_SDRAM_BASE; + /* wait for DQS logic to relock */ for (i = 0; i < 0x200; i++) ; -- cgit v1.1 From ddd104f1ed655eda50c06ba636237a83ed943f34 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:06:55 -0500 Subject: Enable Icache Signed-off-by: TsiChungLiew --- cpu/mcf532x/start.S | 77 ++++++++++++++++++++++++++--------------------------- 1 file changed, 38 insertions(+), 39 deletions(-) diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index d36d076..acd3494 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -31,7 +31,6 @@ #define _START _start #define _FAULT _fault - #define SAVE_ALL \ move.w #0x2700,%sr; /* disable intrs */ \ subl #60,%sp; /* space for 15 regs */ \ @@ -42,7 +41,6 @@ addl #60,%sp; /* space for 15 regs */ \ rte; - .text /* * Vector table. This is used for initial platform startup. @@ -50,35 +48,35 @@ */ _vectors: -INITSP: .long 0x00000000 /* Initial SP */ -INITPC: .long _START /* Initial PC */ -vector02: .long _FAULT /* Access Error */ -vector03: .long _FAULT /* Address Error */ -vector04: .long _FAULT /* Illegal Instruction */ -vector05: .long _FAULT /* Reserved */ -vector06: .long _FAULT /* Reserved */ -vector07: .long _FAULT /* Reserved */ -vector08: .long _FAULT /* Privilege Violation */ -vector09: .long _FAULT /* Trace */ -vector0A: .long _FAULT /* Unimplemented A-Line */ -vector0B: .long _FAULT /* Unimplemented F-Line */ -vector0C: .long _FAULT /* Debug Interrupt */ -vector0D: .long _FAULT /* Reserved */ -vector0E: .long _FAULT /* Format Error */ -vector0F: .long _FAULT /* Unitialized Int. */ - -/* Reserved */ +INITSP: .long 0x00000000 /* Initial SP */ +INITPC: .long _START /* Initial PC */ +vector02: .long _FAULT /* Access Error */ +vector03: .long _FAULT /* Address Error */ +vector04: .long _FAULT /* Illegal Instruction */ +vector05: .long _FAULT /* Reserved */ +vector06: .long _FAULT /* Reserved */ +vector07: .long _FAULT /* Reserved */ +vector08: .long _FAULT /* Privilege Violation */ +vector09: .long _FAULT /* Trace */ +vector0A: .long _FAULT /* Unimplemented A-Line */ +vector0B: .long _FAULT /* Unimplemented F-Line */ +vector0C: .long _FAULT /* Debug Interrupt */ +vector0D: .long _FAULT /* Reserved */ +vector0E: .long _FAULT /* Format Error */ +vector0F: .long _FAULT /* Unitialized Int. */ + +/* Reserved */ vector10_17: .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -vector18: .long _FAULT /* Spurious Interrupt */ -vector19: .long _FAULT /* Autovector Level 1 */ -vector1A: .long _FAULT /* Autovector Level 2 */ -vector1B: .long _FAULT /* Autovector Level 3 */ -vector1C: .long _FAULT /* Autovector Level 4 */ -vector1D: .long _FAULT /* Autovector Level 5 */ -vector1E: .long _FAULT /* Autovector Level 6 */ -vector1F: .long _FAULT /* Autovector Level 7 */ +vector18: .long _FAULT /* Spurious Interrupt */ +vector19: .long _FAULT /* Autovector Level 1 */ +vector1A: .long _FAULT /* Autovector Level 2 */ +vector1B: .long _FAULT /* Autovector Level 3 */ +vector1C: .long _FAULT /* Autovector Level 4 */ +vector1D: .long _FAULT /* Autovector Level 5 */ +vector1E: .long _FAULT /* Autovector Level 6 */ +vector1F: .long _FAULT /* Autovector Level 7 */ /* TRAP #0 - #15 */ vector20_2F: @@ -126,9 +124,9 @@ vector192_255: _start: nop nop - move.w #0x2700,%sr /* Mask off Interrupt */ + move.w #0x2700,%sr /* Mask off Interrupt */ - /* Set vector base register at the beginning of the Flash */ + /* Set vector base register at the beginning of the Flash */ move.l #CFG_FLASH_BASE, %d0 movec %d0, %VBR @@ -149,14 +147,15 @@ _start: move.l %d0, (%a1) move.l %d0, (%a2) - /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ + /* set stackpointer to end of internal ram to get some stackspace for the + first c-code */ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp clr.l %sp@- - move.l #__got_start, %a5 /* put relocation table address to a5 */ + move.l #__got_start, %a5 /* put relocation table address to a5 */ - bsr cpu_init_f /* run low-level CPU init code (from flash) */ - bsr board_init_f /* run low-level board init code (from flash) */ + bsr cpu_init_f /* run low-level CPU init code (from flash) */ + bsr board_init_f /* run low-level board init code (from flash) */ /* board_init_f() does not return */ @@ -269,14 +268,14 @@ _int_handler: icache_enable: move.l #0x01000000, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ - move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ movec %d0, %ACR0 /* Enable cache */ - move.l #(CFG_CS0_BASE + 0xc000), %d0 /* Setup cache mask */ + move.l #(CFG_CS0_BASE + 0x0000), %d0 /* Setup cache mask */ movec %d0, %ACR1 /* Enable cache */ - /*move.l #0x81000100, %d0*/ /* Setup cache mask */ - move.l #0x81000100, %d0 /* Setup cache mask */ + move.l #0x80000200, %d0 /* Setup cache mask */ movec %d0, %CACR /* Enable cache */ + nop move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 moveq #1, %d0 @@ -304,7 +303,7 @@ icache_status: .globl icache_invalid icache_invalid: - move.l #0x00000100, %d0 /* Setup cache mask */ + move.l #0x01000000, %d0 /* Setup cache mask */ movec %d0, %CACR /* Enable cache */ rts -- cgit v1.1 From 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:10:40 -0500 Subject: Create interrupts.c and modify Makefile interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile Signed-off-by: TsiChungLiew --- cpu/mcf532x/Makefile | 2 +- cpu/mcf532x/interrupts.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 1 deletion(-) create mode 100644 cpu/mcf532x/interrupts.c diff --git a/cpu/mcf532x/Makefile b/cpu/mcf532x/Makefile index 452848d..6790d90 100644 --- a/cpu/mcf532x/Makefile +++ b/cpu/mcf532x/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = lib$(CPU).a START = -COBJS = cpu.o speed.o cpu_init.o +COBJS = cpu.o speed.o cpu_init.o interrupts.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mcf532x/interrupts.c b/cpu/mcf532x/interrupts.c new file mode 100644 index 0000000..ff50d7d --- /dev/null +++ b/cpu/mcf532x/interrupts.c @@ -0,0 +1,49 @@ +/* + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* CPU specific interrupt routine */ +#include +#include + +int interrupt_init(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + /* Make sure all interrupts are disabled */ + intp->imrh0 |= 0xFFFFFFFF; + intp->imrl0 |= 0xFFFFFFFF; + + enable_interrupts(); + return 0; +} + +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + intp->imrh0 &= ~CFG_TMRINTR_MASK; +} +#endif -- cgit v1.1 From f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:13:58 -0500 Subject: Header file update, clean up and cache handling Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid. Signed-off-by: TsiChungLiew --- drivers/net/mcffec.c | 66 ++++++++++++++++++++++++++-------------------------- 1 file changed, 33 insertions(+), 33 deletions(-) diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index d1c84ca..609210d 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * (C) Copyright 2007 + * (C) Copyright 2007 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -28,8 +28,7 @@ #include #include -#include -#include +#include #include #include @@ -41,17 +40,8 @@ #undef MII_DEBUG /* Ethernet Transmit and Receive Buffers */ -#define DBUF_LENGTH 1520 - -#define TX_BUF_CNT 2 - -/* - NOTE: PKT_MAXBUF_SIZE must be larger or equal to PKT_MAXBLR_SIZE, - see M54455 User Manual for MAX_FL of Receive Control Register for more - description. If PKT_MAXBUF_SIZE set to 1518, the FEC bandwidth will - reduce to about 20~40% of normal bandwidth. Changing PKT_MAXBLR_SIZE - will not make any improvement on speed -*/ +#define DBUF_LENGTH 1520 +#define TX_BUF_CNT 2 #define PKT_MAXBUF_SIZE 1518 #define PKT_MINBUF_SIZE 64 #define PKT_MAXBLR_SIZE 1520 @@ -102,12 +92,6 @@ struct fec_info_s fec_info[] = { #endif }; -/* - * FEC Ethernet Tx and Rx buffer descriptors allocated at the - * immr->udata_bd address on Dual-Port RAM - * Provide for Double Buffering - */ - int fec_send(struct eth_device *dev, volatile void *packet, int length); int fec_recv(struct eth_device *dev); int fec_init(struct eth_device *dev, bd_t * bd); @@ -166,15 +150,23 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) * Wait for ready */ j = 0; +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && (j < MCFFEC_TOUT_LOOP)) { udelay(1); j++; +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif } if (j >= MCFFEC_TOUT_LOOP) { printf("TX not ready\n"); } - +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif info->txbd[info->txIdx].cbd_bufaddr = (uint) packet; info->txbd[info->txIdx].cbd_datlen = length; info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST; @@ -183,10 +175,16 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) fecp->tdar = 0x01000000; /* Descriptor polling active */ j = 0; +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && (j < MCFFEC_TOUT_LOOP)) { udelay(1); j++; +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif } if (j >= MCFFEC_TOUT_LOOP) { printf("TX timeout\n"); @@ -199,6 +197,9 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) #endif /* return only status bits */ ; +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS); info->txIdx = (info->txIdx + 1) % TX_BUF_CNT; @@ -257,12 +258,6 @@ int fec_recv(struct eth_device *dev) return length; } -/************************************************************** - * - * FEC Ethernet Initialization Routine - * - *************************************************************/ - #ifdef ET_DEBUG void dbgFecRegs(struct eth_device *dev) { @@ -419,7 +414,7 @@ int fec_init(struct eth_device *dev, bd_t * bd) struct fec_info_s *info = dev->priv; volatile fec_t *fecp = (fec_t *) (info->iobase); int i; - u8 *ea; + u8 *ea = NULL; fecpin_setclear(dev, 1); @@ -549,7 +544,9 @@ int mcffec_initialize(bd_t * bis) for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) { - dev = (struct eth_device *)malloc(sizeof *dev); + dev = + (struct eth_device *)memalign(CFG_CACHELINE_SIZE, + sizeof *dev); if (dev == NULL) hang(); @@ -565,16 +562,19 @@ int mcffec_initialize(bd_t * bis) /* setup Receive and Transmit buffer descriptor */ fec_info[i].rxbd = - (cbd_t *) memalign(32, (PKTBUFSRX * sizeof(cbd_t) + 31)); + (cbd_t *) memalign(CFG_CACHELINE_SIZE, + (PKTBUFSRX * sizeof(cbd_t))); fec_info[i].txbd = - (cbd_t *) memalign(32, (TX_BUF_CNT * sizeof(cbd_t) + 31)); - fec_info[i].txbuf = (char *)memalign(32, DBUF_LENGTH + 31); + (cbd_t *) memalign(CFG_CACHELINE_SIZE, + (TX_BUF_CNT * sizeof(cbd_t))); + fec_info[i].txbuf = + (char *)memalign(CFG_CACHELINE_SIZE, DBUF_LENGTH); #ifdef ET_DEBUG printf("rxbd %x txbd %x\n", (int)fec_info[i].rxbd, (int)fec_info[i].txbd); #endif - fec_info[i].phy_name = (char *)malloc(32); + fec_info[i].phy_name = (char *)memalign(CFG_CACHELINE_SIZE, 32); eth_register(dev); -- cgit v1.1 From 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:17:36 -0500 Subject: Rename mcfserial.c. Update include header Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h Signed-off-by: TsiChungLiew --- drivers/serial/Makefile | 2 +- drivers/serial/mcfserial.c | 126 -------------------------------------------- drivers/serial/mcfuart.c | 127 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 128 insertions(+), 127 deletions(-) delete mode 100644 drivers/serial/mcfserial.c create mode 100644 drivers/serial/mcfuart.c diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 2208a08..93c68dd 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libserial.a -COBJS := mcfserial.o +COBJS := mcfuart.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c deleted file mode 100644 index a8ca78a..0000000 --- a/drivers/serial/mcfserial.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * (C) Copyright 2004, Freescale, Inc - * TsiChung Liew, Tsi-Chung.Liew@freescale.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -/* - * Minimal serial functions needed to use one of the uart ports - * as serial console interface. - */ - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_MCFSERIAL -int serial_init(void) -{ - volatile uart_t *uart; - u32 counter; - - uart = (volatile uart_t *)(CFG_UART_BASE); - - /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ - uart->ucr = UART_UCR_RESET_RX; - uart->ucr = UART_UCR_RESET_TX; - uart->ucr = UART_UCR_RESET_ERROR; - uart->ucr = UART_UCR_RESET_MR; - __asm__("nop"); - - uart->uimr = 0; - - /* write to CSR: RX/TX baud rate from timers */ - uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK); - - uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE); - uart->umr = UART_UMR_SB_STOP_BITS_1; - - /* Setting up BaudRate */ - counter = (u32) (gd->bus_clk / (gd->baudrate)); - counter >>= 5; - - /* write to CTUR: divide counter upper byte */ - uart->ubg1 = (u8) ((counter & 0xff00) >> 8); - /* write to CTLR: divide counter lower byte */ - uart->ubg2 = (u8) (counter & 0x00ff); - - uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED); - - return (0); -} - -void serial_putc(const char c) -{ - volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); - - if (c == '\n') - serial_putc('\r'); - - /* Wait for last character to go. */ - while (!(uart->usr & UART_USR_TXRDY)) ; - - uart->utb = c; -} - -void serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - -int serial_getc(void) -{ - volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); - - /* Wait for a character to arrive. */ - while (!(uart->usr & UART_USR_RXRDY)) ; - return uart->urb; -} - -int serial_tstc(void) -{ - volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); - - return (uart->usr & UART_USR_RXRDY); -} - -void serial_setbrg(void) -{ - volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); - u32 counter; - - counter = ((gd->bus_clk / gd->baudrate)) >> 5; - counter++; - - /* write to CTUR: divide counter upper byte */ - uart->ubg1 = ((counter & 0xff00) >> 8); - /* write to CTLR: divide counter lower byte */ - uart->ubg2 = (counter & 0x00ff); - - uart->ucr = UART_UCR_RESET_RX; - uart->ucr = UART_UCR_RESET_TX; - - uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; -} -#endif /* CONFIG_MCFSERIAL */ diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c new file mode 100644 index 0000000..f54aabe --- /dev/null +++ b/drivers/serial/mcfuart.c @@ -0,0 +1,127 @@ +/* + * (C) Copyright 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew, Tsi-Chung.Liew@freescale.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Minimal serial functions needed to use one of the uart ports + * as serial console interface. + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_MCFSERIAL +int serial_init(void) +{ + volatile uart_t *uart; + u32 counter; + + uart = (volatile uart_t *)(CFG_UART_BASE); + + /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ + uart->ucr = UART_UCR_RESET_RX; + uart->ucr = UART_UCR_RESET_TX; + uart->ucr = UART_UCR_RESET_ERROR; + uart->ucr = UART_UCR_RESET_MR; + __asm__("nop"); + + uart->uimr = 0; + + /* write to CSR: RX/TX baud rate from timers */ + uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK); + + uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE); + uart->umr = UART_UMR_SB_STOP_BITS_1; + + /* Setting up BaudRate */ + counter = (u32) (gd->bus_clk / (gd->baudrate)); + counter >>= 5; + + /* write to CTUR: divide counter upper byte */ + uart->ubg1 = (u8) ((counter & 0xff00) >> 8); + /* write to CTLR: divide counter lower byte */ + uart->ubg2 = (u8) (counter & 0x00ff); + + uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED); + + return (0); +} + +void serial_putc(const char c) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + if (c == '\n') + serial_putc('\r'); + + /* Wait for last character to go. */ + while (!(uart->usr & UART_USR_TXRDY)) ; + + uart->utb = c; +} + +void serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +int serial_getc(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + /* Wait for a character to arrive. */ + while (!(uart->usr & UART_USR_RXRDY)) ; + return uart->urb; +} + +int serial_tstc(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + return (uart->usr & UART_USR_RXRDY); +} + +void serial_setbrg(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + u32 counter; + + counter = ((gd->bus_clk / gd->baudrate)) >> 5; + counter++; + + /* write to CTUR: divide counter upper byte */ + uart->ubg1 = ((counter & 0xff00) >> 8); + /* write to CTLR: divide counter lower byte */ + uart->ubg2 = (counter & 0x00ff); + + uart->ucr = UART_UCR_RESET_RX; + uart->ucr = UART_UCR_RESET_TX; + + uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; +} +#endif /* CONFIG_MCFSERIAL */ -- cgit v1.1 From e04acb2eba4782489417240eff76e20e176aec10 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:21:09 -0500 Subject: Rename mcfrtc to rtc Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h Signed-off-by: TsiChungLiew --- include/asm-m68k/mcfrtc.h | 108 ---------------------------------------------- include/asm-m68k/rtc.h | 108 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+), 108 deletions(-) delete mode 100644 include/asm-m68k/mcfrtc.h create mode 100644 include/asm-m68k/rtc.h diff --git a/include/asm-m68k/mcfrtc.h b/include/asm-m68k/mcfrtc.h deleted file mode 100644 index 7078535..0000000 --- a/include/asm-m68k/mcfrtc.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * RealTime Clock - * - * (C) Copyright 2007 - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __MCFRTC_H__ -#define __MCFRTC_H__ - -/* Real time Clock */ -typedef struct rtc_ctrl { - u32 hourmin; /* 0x00 Hours and Minutes Counter Register */ - u32 seconds; /* 0x04 Seconds Counter Register */ - u32 alrm_hm; /* 0x08 Hours and Minutes Alarm Register */ - u32 alrm_sec; /* 0x0C Seconds Alarm Register */ - u32 cr; /* 0x10 Control Register */ - u32 isr; /* 0x14 Interrupt Status Register */ - u32 ier; /* 0x18 Interrupt Enable Register */ - u32 stpwach; /* 0x1C Stopwatch Minutes Register */ - u32 days; /* 0x20 Days Counter Register */ - u32 alrm_day; /* 0x24 Days Alarm Register */ -} rtc_t; - -/* Bit definitions and macros for HOURMIN */ -#define RTC_HOURMIN_MINUTES(x) (((x)&0x0000003F)) -#define RTC_HOURMIN_HOURS(x) (((x)&0x0000001F)<<8) - -/* Bit definitions and macros for SECONDS */ -#define RTC_SECONDS_SECONDS(x) (((x)&0x0000003F)) - -/* Bit definitions and macros for ALRM_HM */ -#define RTC_ALRM_HM_MINUTES(x) (((x)&0x0000003F)) -#define RTC_ALRM_HM_HOURS(x) (((x)&0x0000001F)<<8) - -/* Bit definitions and macros for ALRM_SEC */ -#define RTC_ALRM_SEC_SECONDS(x) (((x)&0x0000003F)) - -/* Bit definitions and macros for CR */ -#define RTC_CR_SWR (0x00000001) -#define RTC_CR_XTL(x) (((x)&0x00000003)<<5) -#define RTC_CR_EN (0x00000080) -#define RTC_CR_32768 (0x0) -#define RTC_CR_32000 (0x1) -#define RTC_CR_38400 (0x2) - -/* Bit definitions and macros for ISR */ -#define RTC_ISR_SW (0x00000001) -#define RTC_ISR_MIN (0x00000002) -#define RTC_ISR_ALM (0x00000004) -#define RTC_ISR_DAY (0x00000008) -#define RTC_ISR_1HZ (0x00000010) -#define RTC_ISR_HR (0x00000020) -#define RTC_ISR_2HZ (0x00000080) -#define RTC_ISR_SAM0 (0x00000100) -#define RTC_ISR_SAM1 (0x00000200) -#define RTC_ISR_SAM2 (0x00000400) -#define RTC_ISR_SAM3 (0x00000800) -#define RTC_ISR_SAM4 (0x00001000) -#define RTC_ISR_SAM5 (0x00002000) -#define RTC_ISR_SAM6 (0x00004000) -#define RTC_ISR_SAM7 (0x00008000) - -/* Bit definitions and macros for IER */ -#define RTC_IER_SW (0x00000001) -#define RTC_IER_MIN (0x00000002) -#define RTC_IER_ALM (0x00000004) -#define RTC_IER_DAY (0x00000008) -#define RTC_IER_1HZ (0x00000010) -#define RTC_IER_HR (0x00000020) -#define RTC_IER_2HZ (0x00000080) -#define RTC_IER_SAM0 (0x00000100) -#define RTC_IER_SAM1 (0x00000200) -#define RTC_IER_SAM2 (0x00000400) -#define RTC_IER_SAM3 (0x00000800) -#define RTC_IER_SAM4 (0x00001000) -#define RTC_IER_SAM5 (0x00002000) -#define RTC_IER_SAM6 (0x00004000) -#define RTC_IER_SAM7 (0x00008000) - -/* Bit definitions and macros for STPWCH */ -#define RTC_STPWCH_CNT(x) (((x)&0x0000003F)) - -/* Bit definitions and macros for DAYS */ -#define RTC_DAYS_DAYS(x) (((x)&0x0000FFFF)) - -/* Bit definitions and macros for ALRM_DAY */ -#define RTC_ALRM_DAY_DAYS(x) (((x)&0x0000FFFF)) - -#endif /* __MCFRTC_H__ */ diff --git a/include/asm-m68k/rtc.h b/include/asm-m68k/rtc.h new file mode 100644 index 0000000..f955bc5 --- /dev/null +++ b/include/asm-m68k/rtc.h @@ -0,0 +1,108 @@ +/* + * RealTime Clock + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MCFRTC_H__ +#define __MCFRTC_H__ + +/* Real time Clock */ +typedef struct rtc_ctrl { + u32 hourmin; /* 0x00 Hours and Minutes Counter Register */ + u32 seconds; /* 0x04 Seconds Counter Register */ + u32 alrm_hm; /* 0x08 Hours and Minutes Alarm Register */ + u32 alrm_sec; /* 0x0C Seconds Alarm Register */ + u32 cr; /* 0x10 Control Register */ + u32 isr; /* 0x14 Interrupt Status Register */ + u32 ier; /* 0x18 Interrupt Enable Register */ + u32 stpwach; /* 0x1C Stopwatch Minutes Register */ + u32 days; /* 0x20 Days Counter Register */ + u32 alrm_day; /* 0x24 Days Alarm Register */ +} rtc_t; + +/* Bit definitions and macros for HOURMIN */ +#define RTC_HOURMIN_MINUTES(x) (((x)&0x0000003F)) +#define RTC_HOURMIN_HOURS(x) (((x)&0x0000001F)<<8) + +/* Bit definitions and macros for SECONDS */ +#define RTC_SECONDS_SECONDS(x) (((x)&0x0000003F)) + +/* Bit definitions and macros for ALRM_HM */ +#define RTC_ALRM_HM_MINUTES(x) (((x)&0x0000003F)) +#define RTC_ALRM_HM_HOURS(x) (((x)&0x0000001F)<<8) + +/* Bit definitions and macros for ALRM_SEC */ +#define RTC_ALRM_SEC_SECONDS(x) (((x)&0x0000003F)) + +/* Bit definitions and macros for CR */ +#define RTC_CR_SWR (0x00000001) +#define RTC_CR_XTL(x) (((x)&0x00000003)<<5) +#define RTC_CR_EN (0x00000080) +#define RTC_CR_32768 (0x0) +#define RTC_CR_32000 (0x1) +#define RTC_CR_38400 (0x2) + +/* Bit definitions and macros for ISR */ +#define RTC_ISR_SW (0x00000001) +#define RTC_ISR_MIN (0x00000002) +#define RTC_ISR_ALM (0x00000004) +#define RTC_ISR_DAY (0x00000008) +#define RTC_ISR_1HZ (0x00000010) +#define RTC_ISR_HR (0x00000020) +#define RTC_ISR_2HZ (0x00000080) +#define RTC_ISR_SAM0 (0x00000100) +#define RTC_ISR_SAM1 (0x00000200) +#define RTC_ISR_SAM2 (0x00000400) +#define RTC_ISR_SAM3 (0x00000800) +#define RTC_ISR_SAM4 (0x00001000) +#define RTC_ISR_SAM5 (0x00002000) +#define RTC_ISR_SAM6 (0x00004000) +#define RTC_ISR_SAM7 (0x00008000) + +/* Bit definitions and macros for IER */ +#define RTC_IER_SW (0x00000001) +#define RTC_IER_MIN (0x00000002) +#define RTC_IER_ALM (0x00000004) +#define RTC_IER_DAY (0x00000008) +#define RTC_IER_1HZ (0x00000010) +#define RTC_IER_HR (0x00000020) +#define RTC_IER_2HZ (0x00000080) +#define RTC_IER_SAM0 (0x00000100) +#define RTC_IER_SAM1 (0x00000200) +#define RTC_IER_SAM2 (0x00000400) +#define RTC_IER_SAM3 (0x00000800) +#define RTC_IER_SAM4 (0x00001000) +#define RTC_IER_SAM5 (0x00002000) +#define RTC_IER_SAM6 (0x00004000) +#define RTC_IER_SAM7 (0x00008000) + +/* Bit definitions and macros for STPWCH */ +#define RTC_STPWCH_CNT(x) (((x)&0x0000003F)) + +/* Bit definitions and macros for DAYS */ +#define RTC_DAYS_DAYS(x) (((x)&0x0000FFFF)) + +/* Bit definitions and macros for ALRM_DAY */ +#define RTC_ALRM_DAY_DAYS(x) (((x)&0x0000FFFF)) + +#endif /* __MCFRTC_H__ */ -- cgit v1.1 From a90e79de8d99e9c9d69d60bfff9f24c337165900 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:22:31 -0500 Subject: New timer structure and defines Seperated from mcftimer.h Signed-off-by: TsiChungLiew --- include/asm-m68k/timer.h | 104 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 include/asm-m68k/timer.h diff --git a/include/asm-m68k/timer.h b/include/asm-m68k/timer.h new file mode 100644 index 0000000..d8f4e2a --- /dev/null +++ b/include/asm-m68k/timer.h @@ -0,0 +1,104 @@ +/* + * timer.h -- ColdFire internal TIMER support defines. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/****************************************************************************/ +#ifndef timer_h +#define timer_h +/****************************************************************************/ + +/****************************************************************************/ +/* Timer structure */ +/****************************************************************************/ +/* DMA Timer module registers */ +typedef struct dtimer_ctrl { + u16 tmr; /* 0x00 Mode register */ + u8 txmr; /* 0x02 Extended Mode register */ + u8 ter; /* 0x03 Event register */ + u32 trr; /* 0x04 Reference register */ + u32 tcr; /* 0x08 Capture register */ + u32 tcn; /* 0x0C Counter register */ +} dtmr_t; + +/*Programmable Interrupt Timer */ +typedef struct pit_ctrl { + u16 pcsr; /* 0x00 Control and Status Register */ + u16 pmr; /* 0x02 Modulus Register */ + u16 pcntr; /* 0x04 Count Register */ +} pit_t; + +/********************************************************************* +* DMA Timers (DTIM) +*********************************************************************/ +/* Bit definitions and macros for DTMR */ +#define DTIM_DTMR_RST (0x0001) /* Reset */ +#define DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) /* Input clock source */ +#define DTIM_DTMR_FRR (0x0008) /* Free run/restart */ +#define DTIM_DTMR_ORRI (0x0010) /* Output reference request/interrupt enable */ +#define DTIM_DTMR_OM (0x0020) /* Output Mode */ +#define DTIM_DTMR_CE(x) (((x)&0x0003)<<6) /* Capture Edge */ +#define DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) /* Prescaler value */ +#define DTIM_DTMR_RST_EN (0x0001) +#define DTIM_DTMR_RST_RST (0x0000) +#define DTIM_DTMR_CE_ANY (0x00C0) +#define DTIM_DTMR_CE_FALL (0x0080) +#define DTIM_DTMR_CE_RISE (0x0040) +#define DTIM_DTMR_CE_NONE (0x0000) +#define DTIM_DTMR_CLK_DTIN (0x0006) +#define DTIM_DTMR_CLK_DIV16 (0x0004) +#define DTIM_DTMR_CLK_DIV1 (0x0002) +#define DTIM_DTMR_CLK_STOP (0x0000) + +/* Bit definitions and macros for DTXMR */ +#define DTIM_DTXMR_MODE16 (0x01) /* Increment Mode */ +#define DTIM_DTXMR_DMAEN (0x80) /* DMA request */ + +/* Bit definitions and macros for DTER */ +#define DTIM_DTER_CAP (0x01) /* Capture event */ +#define DTIM_DTER_REF (0x02) /* Output reference event */ + +/********************************************************************* +* +* Programmable Interrupt Timer Modules (PIT) +* +*********************************************************************/ + +/* Bit definitions and macros for PCSR */ +#define PIT_PCSR_EN (0x0001) +#define PIT_PCSR_RLD (0x0002) +#define PIT_PCSR_PIF (0x0004) +#define PIT_PCSR_PIE (0x0008) +#define PIT_PCSR_OVW (0x0010) +#define PIT_PCSR_HALTED (0x0020) +#define PIT_PCSR_DOZE (0x0040) +#define PIT_PCSR_PRE(x) (((x)&0x000F)<<8) + +/* Bit definitions and macros for PMR */ +#define PIT_PMR_PM(x) (x) + +/* Bit definitions and macros for PCNTR */ +#define PIT_PCNTR_PC(x) (x) + +/****************************************************************************/ +#endif /* timer_h */ -- cgit v1.1 From 0cee9c66318602c856a899ae5fa7579ccba6443a Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:23:15 -0500 Subject: New uart structure and defines Seperated from mcfuart.h Signed-off-by: TsiChungLiew --- include/asm-m68k/uart.h | 171 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 171 insertions(+) create mode 100644 include/asm-m68k/uart.h diff --git a/include/asm-m68k/uart.h b/include/asm-m68k/uart.h new file mode 100644 index 0000000..9a528ea --- /dev/null +++ b/include/asm-m68k/uart.h @@ -0,0 +1,171 @@ +/* + * uart.h -- ColdFire internal UART support defines. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/****************************************************************************/ +#ifndef uart_h +#define uart_h +/****************************************************************************/ + +/* UART module registers */ +/* Register read/write struct */ +typedef struct uart { + u8 umr; /* 0x00 Mode Register */ + u8 resv0[0x3]; + union { + u8 usr; /* 0x04 Status Register */ + u8 ucsr; /* 0x04 Clock Select Register */ + }; + u8 resv1[0x3]; + u8 ucr; /* 0x08 Command Register */ + u8 resv2[0x3]; + union { + u8 utb; /* 0x0c Transmit Buffer */ + u8 urb; /* 0x0c Receive Buffer */ + }; + u8 resv3[0x3]; + union { + u8 uipcr; /* 0x10 Input Port Change Register */ + u8 uacr; /* 0x10 Auxiliary Control reg */ + }; + u8 resv4[0x3]; + union { + u8 uimr; /* 0x14 Interrupt Mask reg */ + u8 uisr; /* 0x14 Interrupt Status reg */ + }; + u8 resv5[0x3]; + u8 ubg1; /* 0x18 Counter Timer Upper Register */ + u8 resv6[0x3]; + u8 ubg2; /* 0x1c Counter Timer Lower Register */ + u8 resv7[0x17]; + u8 uip; /* 0x34 Input Port Register */ + u8 resv8[0x3]; + u8 uop1; /* 0x38 Output Port Set Register */ + u8 resv9[0x3]; + u8 uop0; /* 0x3c Output Port Reset Register */ +} uart_t; + +/********************************************************************* +* Universal Asynchronous Receiver Transmitter (UART) +*********************************************************************/ +/* Bit definitions and macros for UMR */ +#define UART_UMR_BC(x) (((x)&0x03)) +#define UART_UMR_PT (0x04) +#define UART_UMR_PM(x) (((x)&0x03)<<3) +#define UART_UMR_ERR (0x20) +#define UART_UMR_RXIRQ (0x40) +#define UART_UMR_RXRTS (0x80) +#define UART_UMR_SB(x) (((x)&0x0F)) +#define UART_UMR_TXCTS (0x10) /* Trsnsmit CTS */ +#define UART_UMR_TXRTS (0x20) /* Transmit RTS */ +#define UART_UMR_CM(x) (((x)&0x03)<<6) /* CM bits */ +#define UART_UMR_PM_MULTI_ADDR (0x1C) +#define UART_UMR_PM_MULTI_DATA (0x18) +#define UART_UMR_PM_NONE (0x10) +#define UART_UMR_PM_FORCE_HI (0x0C) +#define UART_UMR_PM_FORCE_LO (0x08) +#define UART_UMR_PM_ODD (0x04) +#define UART_UMR_PM_EVEN (0x00) +#define UART_UMR_BC_5 (0x00) +#define UART_UMR_BC_6 (0x01) +#define UART_UMR_BC_7 (0x02) +#define UART_UMR_BC_8 (0x03) +#define UART_UMR_CM_NORMAL (0x00) +#define UART_UMR_CM_ECH (0x40) +#define UART_UMR_CM_LOCAL_LOOP (0x80) +#define UART_UMR_CM_REMOTE_LOOP (0xC0) +#define UART_UMR_SB_STOP_BITS_1 (0x07) +#define UART_UMR_SB_STOP_BITS_15 (0x08) +#define UART_UMR_SB_STOP_BITS_2 (0x0F) + +/* Bit definitions and macros for USR */ +#define UART_USR_RXRDY (0x01) +#define UART_USR_FFULL (0x02) +#define UART_USR_TXRDY (0x04) +#define UART_USR_TXEMP (0x08) +#define UART_USR_OE (0x10) +#define UART_USR_PE (0x20) +#define UART_USR_FE (0x40) +#define UART_USR_RB (0x80) + +/* Bit definitions and macros for UCSR */ +#define UART_UCSR_TCS(x) (((x)&0x0F)) +#define UART_UCSR_RCS(x) (((x)&0x0F)<<4) +#define UART_UCSR_RCS_SYS_CLK (0xD0) +#define UART_UCSR_RCS_CTM16 (0xE0) +#define UART_UCSR_RCS_CTM (0xF0) +#define UART_UCSR_TCS_SYS_CLK (0x0D) +#define UART_UCSR_TCS_CTM16 (0x0E) +#define UART_UCSR_TCS_CTM (0x0F) + +/* Bit definitions and macros for UCR */ +#define UART_UCR_RXC(x) (((x)&0x03)) +#define UART_UCR_TXC(x) (((x)&0x03)<<2) +#define UART_UCR_MISC(x) (((x)&0x07)<<4) +#define UART_UCR_NONE (0x00) +#define UART_UCR_STOP_BREAK (0x70) +#define UART_UCR_START_BREAK (0x60) +#define UART_UCR_BKCHGINT (0x50) +#define UART_UCR_RESET_ERROR (0x40) +#define UART_UCR_RESET_TX (0x30) +#define UART_UCR_RESET_RX (0x20) +#define UART_UCR_RESET_MR (0x10) +#define UART_UCR_TX_DISABLED (0x08) +#define UART_UCR_TX_ENABLED (0x04) +#define UART_UCR_RX_DISABLED (0x02) +#define UART_UCR_RX_ENABLED (0x01) + +/* Bit definitions and macros for UIPCR */ +#define UART_UIPCR_CTS (0x01) +#define UART_UIPCR_COS (0x10) + +/* Bit definitions and macros for UACR */ +#define UART_UACR_IEC (0x01) + +/* Bit definitions and macros for UIMR */ +#define UART_UIMR_TXRDY (0x01) +#define UART_UIMR_RXRDY_FU (0x02) +#define UART_UIMR_DB (0x04) +#define UART_UIMR_COS (0x80) + +/* Bit definitions and macros for UISR */ +#define UART_UISR_TXRDY (0x01) +#define UART_UISR_RXRDY_FU (0x02) +#define UART_UISR_DB (0x04) +#define UART_UISR_RXFTO (0x08) +#define UART_UISR_TXFIFO (0x10) +#define UART_UISR_RXFIFO (0x20) +#define UART_UISR_COS (0x80) + +/* Bit definitions and macros for UIP */ +#define UART_UIP_CTS (0x01) + +/* Bit definitions and macros for UOP1 */ +#define UART_UOP1_RTS (0x01) + +/* Bit definitions and macros for UOP0 */ +#define UART_UOP0_RTS (0x01) + +/****************************************************************************/ +#endif /* mcfuart_h */ -- cgit v1.1 From 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:27:40 -0500 Subject: Update header file and clean up Include immap.h Signed-off-by: TsiChungLiew --- lib_m68k/interrupts.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/lib_m68k/interrupts.c b/lib_m68k/interrupts.c index 6b3ce89..8919c0e 100644 --- a/lib_m68k/interrupts.c +++ b/lib_m68k/interrupts.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * (C) Copyright 2007 + * (C) Copyright 2007 Freescale Semiconductor Inc * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -27,8 +27,8 @@ #include #include #include +#include -#ifdef CONFIG_MCFINTC #define NR_IRQS (CFG_NUM_IRQS) /* @@ -115,4 +115,3 @@ void int_handler (struct pt_regs *fp) printf ("\nBogus External Interrupt Vector %d\n", vec); } } -#endif /* CONFIG_MCFINTC */ \ No newline at end of file -- cgit v1.1 From 2870e98ac8e5553e9187b12a47e5f46babb53990 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:29:21 -0500 Subject: Add mcffec_initialize() Added mcffec_initialize() in eth_initialize() Signed-off-by: TsiChungLiew --- net/eth.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/eth.c b/net/eth.c index cefd30f..4394b63 100644 --- a/net/eth.c +++ b/net/eth.c @@ -268,6 +268,9 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_ATSTK1000) atstk1000_eth_initialize(bis); #endif +#if defined(CONFIG_MCFFEC) + mcffec_initialize(bis); +#endif if (!eth_devices) { puts ("No ethernet found.\n"); -- cgit v1.1 From 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:31:25 -0500 Subject: Update header files Include immap.h and renamed mcfrtc.h to rtc.h Signed-off-by: TsiChungLiew --- rtc/mcfrtc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/rtc/mcfrtc.c b/rtc/mcfrtc.c index c7eb53f..0be5874 100644 --- a/rtc/mcfrtc.c +++ b/rtc/mcfrtc.c @@ -1,6 +1,6 @@ /* - * (C) Copyright 2007 - * Freescale Semiconductor Tsi-Chung.Liew@freescale.com + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this * project. @@ -25,7 +25,8 @@ #include #include -#include +#include +#include #if defined(CONFIG_MCFRTC) && (CONFIG_COMMANDS & CFG_CMD_DATE) -- cgit v1.1 From 52b017604a8f4d4a795880ef6e7861d7f2f1b005 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:36:16 -0500 Subject: Update header file. Include dtimer_intr_setup(). Changed timer divider to global define. Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER Signed-off-by: TsiChungLiew --- lib_m68k/time.c | 120 ++++++++++++++++++++++++++++++-------------------------- 1 file changed, 64 insertions(+), 56 deletions(-) diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 0e4efa4..267a3cd 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -26,6 +26,8 @@ #include #include +#include +#include #ifdef CONFIG_M5271 #include @@ -71,8 +73,10 @@ void udelay(unsigned long usec) timerp->timer_tmr = MCFTIMER_TMR_DISABLE; timerp->timer_tcn = 0; /* set period to 1 us */ - timerp->timer_tmr = (((CFG_CLK / 1000000) - 1) << 8) | MCFTIMER_TMR_CLK1 | - MCFTIMER_TMR_FREERUN | MCFTIMER_TMR_ENABLE; + timerp->timer_tmr = + (((CFG_CLK / 1000000) - + 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_FREERUN | + MCFTIMER_TMR_ENABLE; start = now = timerp->timer_tcn; while (now < start + tmp) @@ -80,7 +84,8 @@ void udelay(unsigned long usec) } } -void mcf_timer_interrupt (void * not_used){ +void mcf_timer_interrupt(void *not_used) +{ volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE4); volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); @@ -91,10 +96,11 @@ void mcf_timer_interrupt (void * not_used){ /* reset timer */ timerp->timer_ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF; - timestamp ++; + timestamp++; } -void timer_init (void) { +void timer_init(void) +{ volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE4); volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); @@ -104,27 +110,29 @@ void timer_init (void) { timerp->timer_tmr = MCFTIMER_TMR_DISABLE; /* initialize and enable timer 4 interrupt */ - irq_install_handler (72, mcf_timer_interrupt, 0); + irq_install_handler(72, mcf_timer_interrupt, 0); intp->int_icr1 |= 0x0000000d; timerp->timer_tcn = 0; timerp->timer_trr = 1000; /* Interrupt every ms */ /* set a period of 1us, set timer mode to restart and enable timer and interrupt */ - timerp->timer_tmr = (((CFG_CLK / 1000000) - 1) << 8) | MCFTIMER_TMR_CLK1 | - MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE; + timerp->timer_tmr = + (((CFG_CLK / 1000000) - + 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_RESTART | + MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE; } -void reset_timer (void) +void reset_timer(void) { timestamp = 0; } -ulong get_timer (ulong base) +ulong get_timer(ulong base) { return (timestamp - base); } -void set_timer (ulong t) +void set_timer(ulong t) { timestamp = t; } @@ -137,7 +145,7 @@ void udelay(unsigned long usec) volatile unsigned short *timerp; uint tmp; - timerp = (volatile unsigned short *) (CFG_MBAR + MCFTIMER_BASE3); + timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE3); while (usec > 0) { if (usec > 65000) @@ -152,21 +160,21 @@ void udelay(unsigned long usec) /* set period to 1 us */ timerp[MCFTIMER_PCSR] = #ifdef CONFIG_M5271 - (6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#else /* !CONFIG_M5271 */ - (5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#endif /* CONFIG_M5271 */ + (6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; +#else /* !CONFIG_M5271 */ + (5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; +#endif /* CONFIG_M5271 */ timerp[MCFTIMER_PMR] = tmp; - while (timerp[MCFTIMER_PCNTR] > 0); + while (timerp[MCFTIMER_PCNTR] > 0) ; } } -void timer_init (void) +void timer_init(void) { volatile unsigned short *timerp; - timerp = (volatile unsigned short *) (CFG_MBAR + MCFTIMER_BASE4); + timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4); timestamp = 0; /* Set up TIMER 4 as poll clock */ @@ -174,27 +182,27 @@ void timer_init (void) timerp[MCFTIMER_PMR] = lastinc = 0; timerp[MCFTIMER_PCSR] = #ifdef CONFIG_M5271 - (6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#else /* !CONFIG_M5271 */ - (5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#endif /* CONFIG_M5271 */ + (6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; +#else /* !CONFIG_M5271 */ + (5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; +#endif /* CONFIG_M5271 */ } -void set_timer (ulong t) +void set_timer(ulong t) { volatile unsigned short *timerp; - timerp = (volatile unsigned short *) (CFG_MBAR + MCFTIMER_BASE4); + timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4); timestamp = 0; timerp[MCFTIMER_PMR] = lastinc = 0; } -ulong get_timer (ulong base) +ulong get_timer(ulong base) { unsigned short now, diff; volatile unsigned short *timerp; - timerp = (volatile unsigned short *) (CFG_MBAR + MCFTIMER_BASE4); + timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4); now = timerp[MCFTIMER_PCNTR]; diff = -(now - lastinc); @@ -203,14 +211,13 @@ ulong get_timer (ulong base) return timestamp - base; } -void wait_ticks (unsigned long ticks) +void wait_ticks(unsigned long ticks) { - set_timer (0); - while (get_timer (0) < ticks); + set_timer(0); + while (get_timer(0) < ticks) ; } #endif - #if defined(CONFIG_M5249) /* * We use timer 1 which is running with a period of 1 us @@ -232,8 +239,10 @@ void udelay(unsigned long usec) timerp->timer_tcn = 0; /* set period to 1 us */ /* on m5249 the system clock is (cpu_clk / 2) -> divide by 2000000 */ - timerp->timer_tmr = (((CFG_CLK / 2000000) - 1) << 8) | MCFTIMER_TMR_CLK1 | - MCFTIMER_TMR_FREERUN | MCFTIMER_TMR_ENABLE; + timerp->timer_tmr = + (((CFG_CLK / 2000000) - + 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_FREERUN | + MCFTIMER_TMR_ENABLE; start = now = timerp->timer_tcn; while (now < start + tmp) @@ -241,7 +250,8 @@ void udelay(unsigned long usec) } } -void mcf_timer_interrupt (void * not_used){ +void mcf_timer_interrupt(void *not_used) +{ volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE2); /* check for timer 2 interrupts */ @@ -251,10 +261,11 @@ void mcf_timer_interrupt (void * not_used){ /* reset timer */ timerp->timer_ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF; - timestamp ++; + timestamp++; } -void timer_init (void) { +void timer_init(void) +{ volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE2); timestamp = 0; @@ -263,29 +274,33 @@ void timer_init (void) { timerp->timer_tmr = MCFTIMER_TMR_DISABLE; /* initialize and enable timer 2 interrupt */ - irq_install_handler (31, mcf_timer_interrupt, 0); + irq_install_handler(31, mcf_timer_interrupt, 0); mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400); - mbar_writeByte(MCFSIM_TIMER2ICR, MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3); + mbar_writeByte(MCFSIM_TIMER2ICR, + MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | + MCFSIM_ICR_PRI3); timerp->timer_tcn = 0; timerp->timer_trr = 1000; /* Interrupt every ms */ /* set a period of 1us, set timer mode to restart and enable timer and interrupt */ /* on m5249 the system clock is (cpu_clk / 2) -> divide by 2000000 */ - timerp->timer_tmr = (((CFG_CLK / 2000000) - 1) << 8) | MCFTIMER_TMR_CLK1 | - MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE; + timerp->timer_tmr = + (((CFG_CLK / 2000000) - + 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_RESTART | + MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE; } -void reset_timer (void) +void reset_timer(void) { timestamp = 0; } -ulong get_timer (ulong base) +ulong get_timer(ulong base) { return (timestamp - base); } -void set_timer (ulong t) +void set_timer(ulong t) { timestamp = t; } @@ -299,12 +314,7 @@ void set_timer (ulong t) #if !defined(CFG_TMR_BASE) || !defined(CFG_INTR_BASE) || !defined(CFG_TMRINTR_NO) || !defined(CFG_TMRINTR_MASK) # error "TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!" #endif - -#include - -extern void dtimer_interrupt(void *not_used); -extern void dtimer_interrupt_setup(void); -extern void dtimer_interrupt_enable(void); +extern void dtimer_intr_setup(void); void udelay(unsigned long usec) { @@ -323,8 +333,8 @@ void udelay(unsigned long usec) timerp->tcn = 0; /* set period to 1 us */ timerp->tmr = - (((CFG_CLK / 1000000) - - 1) << 8) | DTIM_DTMR_CLK_DIV1 | DTIM_DTMR_FRR | DTIM_DTMR_RST_EN; + CFG_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | DTIM_DTMR_FRR | + DTIM_DTMR_RST_EN; start = now = timerp->tcn; while (now < start + tmp) @@ -348,7 +358,6 @@ void dtimer_interrupt(void *not_used) void timer_init(void) { volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE); - volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); timestamp = 0; @@ -358,14 +367,13 @@ void timer_init(void) /* Set up TIMER 4 as clock */ timerp->tmr = DTIM_DTMR_RST_RST; - /* initialize and enable timer 4 interrupt */ + /* initialize and enable timer interrupt */ irq_install_handler(CFG_TMRINTR_NO, dtimer_interrupt, 0); - intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; timerp->tcn = 0; timerp->trr = 1000; /* Interrupt every ms */ - intp->imrh0 &= ~CFG_TMRINTR_MASK; + dtimer_intr_setup(); /* set a period of 1us, set timer mode to restart and enable timer and interrupt */ timerp->tmr = CFG_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | @@ -470,7 +478,7 @@ unsigned long long get_ticks(void) * This function is derived from PowerPC code (timebase clock frequency). * On M68K it returns the number of timer ticks per second. */ -ulong get_tbclk (void) +ulong get_tbclk(void) { ulong tbclk; tbclk = CFG_HZ; -- cgit v1.1 From 0dca874db62718e41253659e60f3a1de7eb418ce Mon Sep 17 00:00:00 2001 From: TsiChung Date: Tue, 10 Jul 2007 15:45:43 -0500 Subject: Cache update and added CFG_UNIFY_CACHE Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only. Signed-off-by: TsiChung --- cpu/mcf532x/cpu_init.c | 3 ++- cpu/mcf532x/start.S | 12 +++++------- drivers/net/mcffec.c | 26 ++++++++------------------ include/configs/M5329EVB.h | 26 ++++++++++++++------------ 4 files changed, 29 insertions(+), 38 deletions(-) diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index b056fbe..32711a1 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -113,6 +113,8 @@ void cpu_init_f(void) fbcs->cscr5 = CFG_CS5_CTRL; fbcs->csmr5 = CFG_CS5_MASK; #endif + + icache_enable(); } /* @@ -120,6 +122,5 @@ void cpu_init_f(void) */ int cpu_init_r(void) { - icache_enable(); return (0); } diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index acd3494..ac44aaa 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -270,8 +270,6 @@ icache_enable: movec %d0, %CACR /* Invalidate cache */ move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ movec %d0, %ACR0 /* Enable cache */ - move.l #(CFG_CS0_BASE + 0x0000), %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ move.l #0x80000200, %d0 /* Setup cache mask */ movec %d0, %CACR /* Enable cache */ @@ -284,11 +282,11 @@ icache_enable: .globl icache_disable icache_disable: - move.l #0x00000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ + move.l #0x01000000, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Disable cache */ clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - movec %d0, %ACR1 /* Enable cache */ + movec %d0, %ACR0 + movec %d0, %ACR1 move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 moveq #0, %d0 @@ -303,7 +301,7 @@ icache_status: .globl icache_invalid icache_invalid: - move.l #0x01000000, %d0 /* Setup cache mask */ + move.l #0x81000200, %d0 /* Setup cache mask */ movec %d0, %CACR /* Enable cache */ rts diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 609210d..11f6721 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -150,23 +150,15 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) * Wait for ready */ j = 0; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && (j < MCFFEC_TOUT_LOOP)) { udelay(1); j++; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif } if (j >= MCFFEC_TOUT_LOOP) { printf("TX not ready\n"); } -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif + info->txbd[info->txIdx].cbd_bufaddr = (uint) packet; info->txbd[info->txIdx].cbd_datlen = length; info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST; @@ -174,21 +166,19 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) /* Activate transmit Buffer Descriptor polling */ fecp->tdar = 0x01000000; /* Descriptor polling active */ - j = 0; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) +#ifdef CFG_UNIFY_CACHE icache_invalid(); #endif + j = 0; while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && (j < MCFFEC_TOUT_LOOP)) { udelay(1); j++; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif } if (j >= MCFFEC_TOUT_LOOP) { printf("TX timeout\n"); } + #ifdef ET_DEBUG printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", __FILE__, __LINE__, __FUNCTION__, j, @@ -196,10 +186,7 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) (info->txbd[info->txIdx].cbd_sc & 0x003C) >> 2); #endif - /* return only status bits */ ; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif + /* return only status bits */ rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS); info->txIdx = (info->txIdx + 1) % TX_BUF_CNT; @@ -213,6 +200,9 @@ int fec_recv(struct eth_device *dev) int length; for (;;) { +#ifdef CFG_UNIFY_CACHE + icache_invalid(); +#endif /* section 16.9.23.2 */ if (info->rxbd[info->rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { length = -1; diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index c90773c..d1ac340 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -47,18 +47,20 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_FLASH | \ - (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO \ - ) + CFG_CMD_CACHE | \ + CFG_CMD_DATE | \ + CFG_CMD_ELF | \ + CFG_CMD_FLASH | \ + (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO \ + ) + +#define CFG_UNIFY_CACHE #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC -- cgit v1.1 From c883f6ea32dce91f07670b3aafecf6c99b1e5341 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 16 Jul 2007 13:11:12 +0200 Subject: Coding style cleanup Signed-off-by: Stefan Roese --- MAKEALL | 2 +- board/freescale/m5329evb/m5329evb.c | 1 - include/asm-m68k/immap.h | 4 ++-- 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/MAKEALL b/MAKEALL index 6771ea6..2cdf10c 100755 --- a/MAKEALL +++ b/MAKEALL @@ -315,7 +315,7 @@ LIST_microblaze=" \ LIST_coldfire=" \ cobra5272 EB+MCF-EV123 EB+MCF-EV123_internal \ idmr M5271EVB M5272C3 M5282EVB \ - TASREG r5200 M5271EVB M5329EVB \ + M5329EVB r5200 TASREG \ " ######################################################################### diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c index 07a02c2..d180b6f 100644 --- a/board/freescale/m5329evb/m5329evb.c +++ b/board/freescale/m5329evb/m5329evb.c @@ -94,4 +94,3 @@ void sync(void) coldfire does not have this instruction. Dummy function */ } #endif /* CFG_FLASH_CFI */ - diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 495459e..4e238c3 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -25,7 +25,7 @@ #ifndef __IMMAP_H #define __IMMAP_H - + #ifdef CONFIG_M5329 #include #include @@ -53,5 +53,5 @@ #define CFG_INTR_BASE (MMAP_INTC0) #define CFG_NUM_IRQS (128) #endif /* CONFIG_M5329 */ - + #endif /* __IMMAP_H */ -- cgit v1.1 From 9998bd37ead85e93953559720710d3b0685c81e6 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 03:19:10 -0500 Subject: Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART Signed-off-by: TsiChungLiew --- drivers/serial/mcfuart.c | 4 ++-- include/configs/M5329EVB.h | 6 ++---- 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index f54aabe..39d4e18 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_MCFSERIAL +#ifdef CONFIG_MCFUART int serial_init(void) { volatile uart_t *uart; @@ -124,4 +124,4 @@ void serial_setbrg(void) uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; } -#endif /* CONFIG_MCFSERIAL */ +#endif /* CONFIG_MCFUART */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index d1ac340..50be03f 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -39,7 +39,8 @@ #undef DEBUG -#define CONFIG_MCFSERIAL +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -84,9 +85,6 @@ # endif /* CFG_DISCOVER_PHY */ #endif -#define CONFIG_MCFUART -#define CFG_UART_PORT (0) - #define CONFIG_MCFRTC #undef RTC_DEBUG -- cgit v1.1 From 9e737d8476e7d6a596d16caaf6a3853a9a1190a2 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 03:30:44 -0500 Subject: Declared attributes of void __mii_init(void) as an alias for int mii_init(void) Signed-off-by: TsiChungLiew --- board/freescale/m5329evb/mii.c | 4 +++- drivers/net/mcffec.c | 2 +- include/common.h | 2 +- 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c index 691b144..68dc04f 100644 --- a/board/freescale/m5329evb/mii.c +++ b/board/freescale/m5329evb/mii.c @@ -203,7 +203,9 @@ int mii_discover_phy(struct eth_device *dev) } #endif /* CFG_DISCOVER_PHY */ -void mii_init(void) +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) { volatile fec_t *fecp; struct fec_info_s *info; diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 11f6721..fde1aae 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -101,7 +101,7 @@ void fec_reset(struct eth_device *dev); extern int fecpin_setclear(struct eth_device *dev, int setclear); #ifdef CFG_DISCOVER_PHY -extern void mii_init(void); +extern void __mii_init(void); extern uint mii_send(uint mii_cmd); extern int mii_discover_phy(struct eth_device *dev); extern int mcffec_miiphy_read(char *devname, unsigned char addr, diff --git a/include/common.h b/include/common.h index 23f9390..a1a3290 100644 --- a/include/common.h +++ b/include/common.h @@ -539,7 +539,7 @@ ulong bootcount_load (void); #define BOOTCOUNT_MAGIC 0xB001C041 /* $(CPU)/.../ */ -void mii_init (void); +/*void mii_init (void);*/ /* $(CPU)/.../lcd.c */ ulong lcd_setmem (ulong); -- cgit v1.1 From 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 03:43:30 -0500 Subject: Moved sync() from board file to include/asm-m68k/io.h Signed-off-by: TsiChungLiew --- board/freescale/m5329evb/m5329evb.c | 7 ------- include/asm-m68k/io.h | 7 +++++++ 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c index d180b6f..058cda5 100644 --- a/board/freescale/m5329evb/m5329evb.c +++ b/board/freescale/m5329evb/m5329evb.c @@ -87,10 +87,3 @@ int testdram(void) return (0); } -#ifdef CFG_FLASH_CFI -void sync(void) -{ - /* This sync function is PowerPC intruction, - coldfire does not have this instruction. Dummy function */ -} -#endif /* CFG_FLASH_CFI */ diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index 8dea02a..114efb1 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -211,4 +211,11 @@ extern inline void out_be32(volatile unsigned *addr, int val) *addr = val; } +static inline void sync(void) +{ + /* This sync function is for PowerPC or other architecture instruction + * ColdFire does not have this instruction. Dummy function, added for + * compatibility (CFI driver) + */ +} #endif /* __ASM_M68K_IO_H__ */ -- cgit v1.1 From 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 03:55:21 -0500 Subject: Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf() Signed-off-by: TsiChungLiew --- cpu/mcf532x/cpu_init.c | 35 +++++++++++++++++++++-------------- drivers/serial/mcfuart.c | 4 ++++ 2 files changed, 25 insertions(+), 14 deletions(-) diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index 32711a1..5a26ae0 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -60,20 +60,6 @@ void cpu_init_f(void) scm2->pacrg = 0; scm1->pacrh = 0; - /* Setup Ports: */ - switch (CFG_UART_PORT) { - case 0: - gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); - break; - case 1: - gpio->par_uart = - (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3)); - break; - case 2: - gpio->par_uart = (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2); - break; - } - /* Port configuration */ gpio->par_cs = 0x3E; @@ -124,3 +110,24 @@ int cpu_init_r(void) { return (0); } + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3)); + break; + case 2: + gpio->par_timer &= 0x0F; + gpio->par_timer |= (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2); + break; + } +} + diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index 39d4e18..bc7077d 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -34,6 +34,8 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_MCFUART +extern void uart_port_conf(void); + int serial_init(void) { volatile uart_t *uart; @@ -41,6 +43,8 @@ int serial_init(void) uart = (volatile uart_t *)(CFG_UART_BASE); + uart_port_conf(); + /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ uart->ucr = UART_UCR_RESET_RX; uart->ucr = UART_UCR_RESET_TX; -- cgit v1.1 From 99c03c175d2689093176facf17c58ce2cb320001 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 03:58:52 -0500 Subject: Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c Signed-off-by: TsiChungLiew --- include/asm-m68k/immap.h | 2 +- lib_m68k/time.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 4e238c3..7c267af 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -41,7 +41,7 @@ #define CFG_TMRINTR_NO (INT0_HI_DTMR1) #define CFG_TMRINTR_MASK (INTC_IPRH_INT33) #define CFG_TMRINTR_PRI (6) -#define CFG_TIMER_PRESCALER (((CFG_CLK / 1000000) - 1) << 8) +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) #endif #ifdef CONFIG_MCFPIT diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 267a3cd..3dbce07 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -48,6 +48,8 @@ #include #endif +DECLARE_GLOBAL_DATA_PTR; + static ulong timestamp; #if defined(CONFIG_M5282) || defined(CONFIG_M5271) static unsigned short lastinc; -- cgit v1.1 From eaf9e447beb3e498818ef8ad0b8c1597cd506149 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 04:11:20 -0500 Subject: Added I2C support Signed-off-by: TsiChungLiew --- include/asm-m68k/fsl_i2c.h | 86 ++++++++++++++++++++++++++++++++++++++++++++++ include/configs/M5329EVB.h | 52 +++++++++++++++++----------- 2 files changed, 117 insertions(+), 21 deletions(-) create mode 100644 include/asm-m68k/fsl_i2c.h diff --git a/include/asm-m68k/fsl_i2c.h b/include/asm-m68k/fsl_i2c.h new file mode 100644 index 0000000..4f71341 --- /dev/null +++ b/include/asm-m68k/fsl_i2c.h @@ -0,0 +1,86 @@ +/* + * Freescale I2C Controller + * + * Copyright 2006 Freescale Semiconductor, Inc. + * + * Based on earlier versions by Gleb Natapov , + * Xianghua Xiao , Eran Liberty (liberty@freescale.com), + * and Jeff Brown. + * Some bits are taken from linux driver writen by adrian@humboldt.co.uk. + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_FSL_I2C_H_ +#define _ASM_FSL_I2C_H_ + +#include + +typedef struct fsl_i2c { + + u8 adr; /* I2C slave address */ + u8 res0[3]; +#define I2C_ADR 0xFE +#define I2C_ADR_SHIFT 1 +#define I2C_ADR_RES ~(I2C_ADR) + + u8 fdr; /* I2C frequency divider register */ + u8 res1[3]; +#define IC2_FDR 0x3F +#define IC2_FDR_SHIFT 0 +#define IC2_FDR_RES ~(IC2_FDR) + + u8 cr; /* I2C control redister */ + u8 res2[3]; +#define I2C_CR_MEN 0x80 +#define I2C_CR_MIEN 0x40 +#define I2C_CR_MSTA 0x20 +#define I2C_CR_MTX 0x10 +#define I2C_CR_TXAK 0x08 +#define I2C_CR_RSTA 0x04 +#define I2C_CR_BCST 0x01 + + u8 sr; /* I2C status register */ + u8 res3[3]; +#define I2C_SR_MCF 0x80 +#define I2C_SR_MAAS 0x40 +#define I2C_SR_MBB 0x20 +#define I2C_SR_MAL 0x10 +#define I2C_SR_BCSTM 0x08 +#define I2C_SR_SRW 0x04 +#define I2C_SR_MIF 0x02 +#define I2C_SR_RXAK 0x01 + + u8 dr; /* I2C data register */ + u8 res4[3]; +#define I2C_DR 0xFF +#define I2C_DR_SHIFT 0 +#define I2C_DR_RES ~(I2C_DR) + + u8 dfsrr; /* I2C digital filter sampling rate register */ + u8 res5[3]; +#define I2C_DFSRR 0x3F +#define I2C_DFSRR_SHIFT 0 +#define I2C_DFSRR_RES ~(I2C_DR) + + /* Fill out the reserved block */ + u8 res6[0xE8]; +} fsl_i2c_t; + +#endif /* _ASM_I2C_H_ */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 50be03f..605684b 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -52,6 +52,7 @@ CFG_CMD_DATE | \ CFG_CMD_ELF | \ CFG_CMD_FLASH | \ + CFG_CMD_I2C | \ (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ CFG_CMD_MEMORY | \ CFG_CMD_MISC | \ @@ -65,15 +66,15 @@ #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC -# define CONFIG_NET_MULTI 1 +# define CONFIG_NET_MULTI 1 # define CONFIG_MII 1 # define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8 # define CFG_FAULT_ECHO_LINK_DOWN -# define CFG_FEC0_PINMUX 0 -# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE -# define MCFFEC_TOUT_LOOP 50000 +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 /* If CFG_DISCOVER_PHY is not defined - hardcoded */ # ifndef CFG_DISCOVER_PHY # define FECDUPLEX FULL @@ -92,14 +93,23 @@ #define CONFIG_MCFTMR #undef CONFIG_MCFPIT +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x58000 +#define CFG_IMMR CFG_MBAR + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 # define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ @@ -117,26 +127,26 @@ "save\0" \ "" -#define CONFIG_PRAM 512 /* 512 KB */ -#define CFG_PROMPT "-> " +#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PROMPT "-> " #define CFG_LONGHELP /* undef to save memory */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x40010000 -#define CFG_HZ 1000 -#define CFG_CLK 80000000 -#define CFG_CPU_CLK CFG_CLK * 3 +#define CFG_HZ 1000 +#define CFG_CLK 80000000 +#define CFG_CPU_CLK CFG_CLK * 3 -#define CFG_MBAR 0xFC000000 +#define CFG_MBAR 0xFC000000 /* * Low Level Configuration Settings @@ -190,13 +200,13 @@ # define CFG_FLASH_CFI_DRIVER 1 # define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ # define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT -# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #endif -#define CFG_FLASH_BASE 0 -#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_FLASH_BASE 0 +#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash -- cgit v1.1 From 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 04:31:18 -0500 Subject: Added NAND support Signed-off-by: TsiChungLiew --- board/freescale/m5329evb/Makefile | 2 +- board/freescale/m5329evb/nand.c | 115 +++++++++++++++++++++++++++++++ include/asm-m68k/bitops.h | 39 +++++++++++ include/asm-m68k/errno.h | 138 ++++++++++++++++++++++++++++++++++++++ include/configs/M5329EVB.h | 27 +++++++- 5 files changed, 317 insertions(+), 4 deletions(-) create mode 100644 board/freescale/m5329evb/nand.c create mode 100644 include/asm-m68k/errno.h diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile index 74c2528..ab0f11e 100644 --- a/board/freescale/m5329evb/Makefile +++ b/board/freescale/m5329evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o mii.o nand.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c new file mode 100644 index 0000000..2a4ca71 --- /dev/null +++ b/board/freescale/m5329evb/nand.c @@ -0,0 +1,115 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#include +#include + +#define SET_CLE 0x10 +#define CLR_CLE ~SET_CLE +#define SET_ALE 0x08 +#define CLR_ALE ~SET_ALE + +static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd) +{ + struct nand_chip *this = mtdinfo->priv; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + u32 nand_baseaddr = (u32) this->IO_ADDR_W; + + switch (cmd) { + case NAND_CTL_SETNCE: + case NAND_CTL_CLRNCE: + break; + case NAND_CTL_SETCLE: + nand_baseaddr |= SET_CLE; + break; + case NAND_CTL_CLRCLE: + nand_baseaddr &= CLR_CLE; + break; + case NAND_CTL_SETALE: + nand_baseaddr |= SET_ALE; + break; + case NAND_CTL_CLRALE: + nand_baseaddr |= CLR_ALE; + break; + case NAND_CTL_SETWP: + fbcs->csmr2 |= CSMR_WP; + break; + case NAND_CTL_CLRWP: + fbcs->csmr2 &= ~CSMR_WP; + break; + } + this->IO_ADDR_W = (void __iomem *)(nand_baseaddr); +} + +static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte) +{ + struct nand_chip *this = mtdinfo->priv; + *((volatile u8 *)(this->IO_ADDR_W)) = byte; +} + +static u8 nand_read_byte(struct mtd_info *mtdinfo) +{ + struct nand_chip *this = mtdinfo->priv; + return (u8) (*((volatile u8 *)this->IO_ADDR_R)); +} + +static int nand_dev_ready(struct mtd_info *mtdinfo) +{ + return 1; +} + +int board_nand_init(struct nand_chip *nand) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + *((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004; + + /* set up pin configuration */ + gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; + gpio->pddr_timer |= 0x08; + gpio->ppd_timer |= 0x08; + gpio->pclrr_timer = 0; + gpio->podr_timer = 0; + + nand->chip_delay = 50; + nand->eccmode = NAND_ECC_SOFT; + nand->hwcontrol = nand_hwcontrol; + nand->read_byte = nand_read_byte; + nand->write_byte = nand_write_byte; + nand->dev_ready = nand_dev_ready; + + return 0; +} +#endif + diff --git a/include/asm-m68k/bitops.h b/include/asm-m68k/bitops.h index 3283714..0f9e8ab 100644 --- a/include/asm-m68k/bitops.h +++ b/include/asm-m68k/bitops.h @@ -15,4 +15,43 @@ extern int test_and_set_bit(int nr, volatile void *addr); extern int test_and_clear_bit(int nr, volatile void *addr); extern int test_and_change_bit(int nr, volatile void *addr); +#ifdef __KERNEL__ + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +extern __inline__ int ffs(int x) +{ + int r = 1; + + if (!x) + return 0; + if (!(x & 0xffff)) { + x >>= 16; + r += 16; + } + if (!(x & 0xff)) { + x >>= 8; + r += 8; + } + if (!(x & 0xf)) { + x >>= 4; + r += 4; + } + if (!(x & 3)) { + x >>= 2; + r += 2; + } + if (!(x & 1)) { + x >>= 1; + r += 1; + } + return r; +} +#define __ffs(x) (ffs(x) - 1) + +#endif /* __KERNEL__ */ + #endif /* _M68K_BITOPS_H */ diff --git a/include/asm-m68k/errno.h b/include/asm-m68k/errno.h new file mode 100644 index 0000000..ff364b8 --- /dev/null +++ b/include/asm-m68k/errno.h @@ -0,0 +1,138 @@ +#ifndef _PPC_ERRNO_H +#define _PPC_ERRNO_H + +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Arg list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ +#define ECHILD 10 /* No child processes */ +#define EAGAIN 11 /* Try again */ +#define ENOMEM 12 /* Out of memory */ +#define EACCES 13 /* Permission denied */ +#define EFAULT 14 /* Bad address */ +#define ENOTBLK 15 /* Block device required */ +#define EBUSY 16 /* Device or resource busy */ +#define EEXIST 17 /* File exists */ +#define EXDEV 18 /* Cross-device link */ +#define ENODEV 19 /* No such device */ +#define ENOTDIR 20 /* Not a directory */ +#define EISDIR 21 /* Is a directory */ +#define EINVAL 22 /* Invalid argument */ +#define ENFILE 23 /* File table overflow */ +#define EMFILE 24 /* Too many open files */ +#define ENOTTY 25 /* Not a typewriter */ +#define ETXTBSY 26 /* Text file busy */ +#define EFBIG 27 /* File too large */ +#define ENOSPC 28 /* No space left on device */ +#define ESPIPE 29 /* Illegal seek */ +#define EROFS 30 /* Read-only file system */ +#define EMLINK 31 /* Too many links */ +#define EPIPE 32 /* Broken pipe */ +#define EDOM 33 /* Math argument out of domain of func */ +#define ERANGE 34 /* Math result not representable */ +#define EDEADLK 35 /* Resource deadlock would occur */ +#define ENAMETOOLONG 36 /* File name too long */ +#define ENOLCK 37 /* No record locks available */ +#define ENOSYS 38 /* Function not implemented */ +#define ENOTEMPTY 39 /* Directory not empty */ +#define ELOOP 40 /* Too many symbolic links encountered */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define ENOMSG 42 /* No message of desired type */ +#define EIDRM 43 /* Identifier removed */ +#define ECHRNG 44 /* Channel number out of range */ +#define EL2NSYNC 45 /* Level 2 not synchronized */ +#define EL3HLT 46 /* Level 3 halted */ +#define EL3RST 47 /* Level 3 reset */ +#define ELNRNG 48 /* Link number out of range */ +#define EUNATCH 49 /* Protocol driver not attached */ +#define ENOCSI 50 /* No CSI structure available */ +#define EL2HLT 51 /* Level 2 halted */ +#define EBADE 52 /* Invalid exchange */ +#define EBADR 53 /* Invalid request descriptor */ +#define EXFULL 54 /* Exchange full */ +#define ENOANO 55 /* No anode */ +#define EBADRQC 56 /* Invalid request code */ +#define EBADSLT 57 /* Invalid slot */ +#define EDEADLOCK 58 /* File locking deadlock error */ +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EMULTIHOP 72 /* Multihop attempted */ +#define EDOTDOT 73 /* RFS specific error */ +#define EBADMSG 74 /* Not a data message */ +#define EOVERFLOW 75 /* Value too large for defined data type */ +#define ENOTUNIQ 76 /* Name not unique on network */ +#define EBADFD 77 /* File descriptor in bad state */ +#define EREMCHG 78 /* Remote address changed */ +#define ELIBACC 79 /* Can not access a needed shared library */ +#define ELIBBAD 80 /* Accessing a corrupted shared library */ +#define ELIBSCN 81 /* .lib section in a.out corrupted */ +#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 83 /* Cannot exec a shared library directly */ +#define EILSEQ 84 /* Illegal byte sequence */ +#define ERESTART 85 /* Interrupted system call should be restarted */ +#define ESTRPIPE 86 /* Streams pipe error */ +#define EUSERS 87 /* Too many users */ +#define ENOTSOCK 88 /* Socket operation on non-socket */ +#define EDESTADDRREQ 89 /* Destination address required */ +#define EMSGSIZE 90 /* Message too long */ +#define EPROTOTYPE 91 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 92 /* Protocol not available */ +#define EPROTONOSUPPORT 93 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ +#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 96 /* Protocol family not supported */ +#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ +#define EADDRINUSE 98 /* Address already in use */ +#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ +#define ENETDOWN 100 /* Network is down */ +#define ENETUNREACH 101 /* Network is unreachable */ +#define ENETRESET 102 /* Network dropped connection because of reset */ +#define ECONNABORTED 103 /* Software caused connection abort */ +#define ECONNRESET 104 /* Connection reset by peer */ +#define ENOBUFS 105 /* No buffer space available */ +#define EISCONN 106 /* Transport endpoint is already connected */ +#define ENOTCONN 107 /* Transport endpoint is not connected */ +#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 109 /* Too many references: cannot splice */ +#define ETIMEDOUT 110 /* Connection timed out */ +#define ECONNREFUSED 111 /* Connection refused */ +#define EHOSTDOWN 112 /* Host is down */ +#define EHOSTUNREACH 113 /* No route to host */ +#define EALREADY 114 /* Operation already in progress */ +#define EINPROGRESS 115 /* Operation now in progress */ +#define ESTALE 116 /* Stale NFS file handle */ +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ +#define EDQUOT 122 /* Quota exceeded */ + +#define ENOMEDIUM 123 /* No medium found */ +#define EMEDIUMTYPE 124 /* Wrong medium type */ + +/* Should never be seen by user programs */ +#define ERESTARTSYS 512 +#define ERESTARTNOINTR 513 +#define ERESTARTNOHAND 514 /* restart if no handler.. */ +#define ENOIOCTLCMD 515 /* No ioctl command */ + +#define _LAST_ERRNO 515 + +#endif diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 605684b..6a7e052 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -47,7 +47,7 @@ #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ +#define DEFAULT_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_CACHE | \ CFG_CMD_DATE | \ CFG_CMD_ELF | \ @@ -62,6 +62,12 @@ CFG_CMD_REGINFO \ ) +#ifdef NANDFLASH_SIZE +# define CONFIG_COMMANDS (DEFAULT_COMMANDS | CFG_CMD_NAND) +#else +# define CONFIG_COMMANDS (DEFAULT_COMMANDS) +#endif + #define CFG_UNIFY_CACHE #define CONFIG_MCFFEC @@ -148,6 +154,8 @@ #define CFG_MBAR 0xFC000000 +#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) + /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) @@ -205,6 +213,19 @@ # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #endif +#ifdef NANDFLASH_SIZE +# define CFG_MAX_NAND_DEVICE 1 +# define CFG_NAND_BASE (CFG_CS2_BASE << 16) +# define CFG_NAND_SIZE 1 +# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +# define NAND_MAX_CHIPS 1 +# define NAND_ALLOW_ERASE_ALL 1 +# define CONFIG_JFFS2_NAND 1 +# define CONFIG_JFFS2_DEV "nand0" +# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) +# define CONFIG_JFFS2_PART_OFFSET 0x00000000 +#endif + #define CFG_FLASH_BASE 0 #define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) @@ -241,8 +262,8 @@ #define CFG_CS1_CTRL 0x002A3780 #ifdef NANDFLASH_SIZE -#define CFG_CS2_BASE 0x00800000 -#define CFG_CS2_MASK 0x00ff0001 +#define CFG_CS2_BASE 0x2000 +#define CFG_CS2_MASK ((NANDFLASH_SIZE << 20) | 1) #define CFG_CS2_CTRL 0x00001f60 #endif -- cgit v1.1 From a41de1f0d373e09c782dea558385a06247111ba5 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 05:15:18 -0500 Subject: Port enabled for I2C signals and chipselects port configuration. Signed-off-by: TsiChungLiew --- cpu/mcf532x/cpu_init.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index 5a26ae0..eb9b7a4 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -61,7 +61,7 @@ void cpu_init_f(void) scm1->pacrh = 0; /* Port configuration */ - gpio->par_cs = 0x3E; + gpio->par_cs = 0; #if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL)) fbcs->csar0 = CFG_CS0_BASE; @@ -71,35 +71,44 @@ void cpu_init_f(void) #if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) /* Latch chipselect */ + gpio->par_cs |= GPIO_PAR_CS1; fbcs->csar1 = CFG_CS1_BASE; fbcs->cscr1 = CFG_CS1_CTRL; fbcs->csmr1 = CFG_CS1_MASK; #endif #if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) + gpio->par_cs |= GPIO_PAR_CS2; fbcs->csar2 = CFG_CS2_BASE; fbcs->cscr2 = CFG_CS2_CTRL; fbcs->csmr2 = CFG_CS2_MASK; #endif #if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) + gpio->par_cs |= GPIO_PAR_CS3; fbcs->csar3 = CFG_CS3_BASE; fbcs->cscr3 = CFG_CS3_CTRL; fbcs->csmr3 = CFG_CS3_MASK; #endif #if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) + gpio->par_cs |= GPIO_PAR_CS4; fbcs->csar4 = CFG_CS4_BASE; fbcs->cscr4 = CFG_CS4_CTRL; fbcs->csmr4 = CFG_CS4_MASK; #endif #if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) + gpio->par_cs |= GPIO_PAR_CS5; fbcs->csar5 = CFG_CS5_BASE; fbcs->cscr5 = CFG_CS5_CTRL; fbcs->csmr5 = CFG_CS5_MASK; #endif +#ifdef CONFIG_FSL_I2C + gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA; +#endif + icache_enable(); } -- cgit v1.1 From 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 8 Aug 2007 09:54:26 +0200 Subject: Coding style cleanup Signed-off-by: Stefan Roese --- board/freescale/m5329evb/m5329evb.c | 1 - board/freescale/m5329evb/nand.c | 103 ++++++++++++++++++------------------ cpu/mcf532x/cpu_init.c | 11 ++-- 3 files changed, 56 insertions(+), 59 deletions(-) diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c index 058cda5..242eb1a 100644 --- a/board/freescale/m5329evb/m5329evb.c +++ b/board/freescale/m5329evb/m5329evb.c @@ -86,4 +86,3 @@ int testdram(void) return (0); } - diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c index 2a4ca71..2272a24 100644 --- a/board/freescale/m5329evb/nand.c +++ b/board/freescale/m5329evb/nand.c @@ -35,81 +35,80 @@ DECLARE_GLOBAL_DATA_PTR; #include #include -#define SET_CLE 0x10 -#define CLR_CLE ~SET_CLE -#define SET_ALE 0x08 -#define CLR_ALE ~SET_ALE +#define SET_CLE 0x10 +#define CLR_CLE ~SET_CLE +#define SET_ALE 0x08 +#define CLR_ALE ~SET_ALE static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd) { - struct nand_chip *this = mtdinfo->priv; - volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; - u32 nand_baseaddr = (u32) this->IO_ADDR_W; + struct nand_chip *this = mtdinfo->priv; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + u32 nand_baseaddr = (u32) this->IO_ADDR_W; - switch (cmd) { - case NAND_CTL_SETNCE: - case NAND_CTL_CLRNCE: - break; - case NAND_CTL_SETCLE: - nand_baseaddr |= SET_CLE; - break; - case NAND_CTL_CLRCLE: - nand_baseaddr &= CLR_CLE; - break; - case NAND_CTL_SETALE: - nand_baseaddr |= SET_ALE; - break; - case NAND_CTL_CLRALE: - nand_baseaddr |= CLR_ALE; - break; - case NAND_CTL_SETWP: - fbcs->csmr2 |= CSMR_WP; - break; - case NAND_CTL_CLRWP: - fbcs->csmr2 &= ~CSMR_WP; - break; - } - this->IO_ADDR_W = (void __iomem *)(nand_baseaddr); + switch (cmd) { + case NAND_CTL_SETNCE: + case NAND_CTL_CLRNCE: + break; + case NAND_CTL_SETCLE: + nand_baseaddr |= SET_CLE; + break; + case NAND_CTL_CLRCLE: + nand_baseaddr &= CLR_CLE; + break; + case NAND_CTL_SETALE: + nand_baseaddr |= SET_ALE; + break; + case NAND_CTL_CLRALE: + nand_baseaddr |= CLR_ALE; + break; + case NAND_CTL_SETWP: + fbcs->csmr2 |= CSMR_WP; + break; + case NAND_CTL_CLRWP: + fbcs->csmr2 &= ~CSMR_WP; + break; + } + this->IO_ADDR_W = (void __iomem *)(nand_baseaddr); } static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte) { - struct nand_chip *this = mtdinfo->priv; - *((volatile u8 *)(this->IO_ADDR_W)) = byte; + struct nand_chip *this = mtdinfo->priv; + *((volatile u8 *)(this->IO_ADDR_W)) = byte; } static u8 nand_read_byte(struct mtd_info *mtdinfo) { - struct nand_chip *this = mtdinfo->priv; - return (u8) (*((volatile u8 *)this->IO_ADDR_R)); + struct nand_chip *this = mtdinfo->priv; + return (u8) (*((volatile u8 *)this->IO_ADDR_R)); } static int nand_dev_ready(struct mtd_info *mtdinfo) { - return 1; + return 1; } int board_nand_init(struct nand_chip *nand) { - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - *((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004; + *((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004; - /* set up pin configuration */ - gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; - gpio->pddr_timer |= 0x08; - gpio->ppd_timer |= 0x08; - gpio->pclrr_timer = 0; - gpio->podr_timer = 0; + /* set up pin configuration */ + gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; + gpio->pddr_timer |= 0x08; + gpio->ppd_timer |= 0x08; + gpio->pclrr_timer = 0; + gpio->podr_timer = 0; - nand->chip_delay = 50; - nand->eccmode = NAND_ECC_SOFT; - nand->hwcontrol = nand_hwcontrol; - nand->read_byte = nand_read_byte; - nand->write_byte = nand_write_byte; - nand->dev_ready = nand_dev_ready; + nand->chip_delay = 50; + nand->eccmode = NAND_ECC_SOFT; + nand->hwcontrol = nand_hwcontrol; + nand->read_byte = nand_read_byte; + nand->write_byte = nand_write_byte; + nand->dev_ready = nand_dev_ready; - return 0; + return 0; } #endif - diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index eb9b7a4..93086f7 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -71,35 +71,35 @@ void cpu_init_f(void) #if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) /* Latch chipselect */ - gpio->par_cs |= GPIO_PAR_CS1; + gpio->par_cs |= GPIO_PAR_CS1; fbcs->csar1 = CFG_CS1_BASE; fbcs->cscr1 = CFG_CS1_CTRL; fbcs->csmr1 = CFG_CS1_MASK; #endif #if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) - gpio->par_cs |= GPIO_PAR_CS2; + gpio->par_cs |= GPIO_PAR_CS2; fbcs->csar2 = CFG_CS2_BASE; fbcs->cscr2 = CFG_CS2_CTRL; fbcs->csmr2 = CFG_CS2_MASK; #endif #if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) - gpio->par_cs |= GPIO_PAR_CS3; + gpio->par_cs |= GPIO_PAR_CS3; fbcs->csar3 = CFG_CS3_BASE; fbcs->cscr3 = CFG_CS3_CTRL; fbcs->csmr3 = CFG_CS3_MASK; #endif #if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) - gpio->par_cs |= GPIO_PAR_CS4; + gpio->par_cs |= GPIO_PAR_CS4; fbcs->csar4 = CFG_CS4_BASE; fbcs->cscr4 = CFG_CS4_CTRL; fbcs->csmr4 = CFG_CS4_MASK; #endif #if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) - gpio->par_cs |= GPIO_PAR_CS5; + gpio->par_cs |= GPIO_PAR_CS5; fbcs->csar5 = CFG_CS5_BASE; fbcs->cscr5 = CFG_CS5_CTRL; fbcs->csmr5 = CFG_CS5_MASK; @@ -139,4 +139,3 @@ void uart_port_conf(void) break; } } - -- cgit v1.1 From 0e19209767194a97cec6d93dba9e64d1da8d548e Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Wed, 15 Aug 2007 12:14:23 +0200 Subject: PPC4xx:HCU4/5-Board fix compile warning Signed-off-by: Niklaus Giger --- board/netstal/common/flash.c | 528 --------------------------------------- board/netstal/common/hcu_flash.c | 528 +++++++++++++++++++++++++++++++++++++++ board/netstal/hcu4/Makefile | 14 +- board/netstal/hcu5/Makefile | 14 +- 4 files changed, 546 insertions(+), 538 deletions(-) delete mode 100644 board/netstal/common/flash.c create mode 100644 board/netstal/common/hcu_flash.c diff --git a/board/netstal/common/flash.c b/board/netstal/common/flash.c deleted file mode 100644 index be2cb37..0000000 --- a/board/netstal/common/flash.c +++ /dev/null @@ -1,528 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com - * - * Modified 6/6/2007 - * Added isync - * Niklaus Giger, Netstal Maschinen, niklaus.giger@netstal.com - * - */ - -#include -#include -#include - -#if CFG_MAX_FLASH_BANKS != 1 -#error "CFG_MAX_FLASH_BANKS must be 1" -#endif -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long * addr, flash_info_t * info); -static int write_word (flash_info_t * info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t * info); - -#define ADDR0 0x5555 -#define ADDR1 0x2aaa -#define FLASH_WORD_SIZE unsigned char - -/*-----------------------------------------------------------------------*/ - -unsigned long flash_init (void) -{ - unsigned long size_b0; - - /* Init: no FLASHes known */ - flash_info[0].flash_id = FLASH_UNKNOWN; - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size ((vu_long *) FLASH_BASE0_PRELIM, - &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0- Size=0x%08lx=%ld MB\n", - size_b0, size_b0 << 20); - } - - /* Only one bank */ - /* Setup offsets */ - flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]); - - /* Monitor protection ON by default */ - (void) flash_protect (FLAG_PROTECT_SET, - FLASH_BASE0_PRELIM, - FLASH_BASE0_PRELIM + monitor_flash_len - 1, - &flash_info[0]); - flash_info[0].size = size_b0; - - return size_b0; -} - - -/*-----------------------------------------------------------------------*/ -/* - * This implementation assumes that the flash chips are uniform sector - * devices. This is true for all likely flash devices on a HCUx. - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - unsigned idx; - unsigned long sector_size = info->size / info->sector_count; - - for (idx = 0; idx < info->sector_count; idx += 1) { - info->start[idx] = base + (idx * sector_size); - } -} - -/*-----------------------------------------------------------------------*/ -void flash_print_info (flash_info_t * info) -{ - int i; - int k; - int size; - int erased; - volatile unsigned long *flash; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf ("AMD "); - break; - case FLASH_MAN_FUJ: - printf ("FUJITSU "); - break; - case FLASH_MAN_SST: - printf ("SST "); - break; - case FLASH_MAN_STM: - printf ("ST Micro "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - /* (Reduced table of only parts expected in HCUx boards.) */ - switch (info->flash_id) { - case FLASH_MAN_AMD | FLASH_AM040: - printf ("AM29F040 (512 Kbit, uniform sector size)\n"); - break; - case FLASH_MAN_STM | FLASH_AM040: - printf ("MM29W040W (512 Kbit, uniform sector size)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count - 1)) - size = info->start[i + 1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - erased = 1; - flash = (volatile unsigned long *) info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k = 0; k < size; k++) { - if (*flash++ != 0xffffffff) { - erased = 0; - break; - } - } - - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s%s", - info->start[i], - erased ? " E" : " ", info->protect[i] ? "RO " : " " - ); - } - printf ("\n"); - return; -} - -/*-----------------------------------------------------------------------*/ - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (vu_long * addr, flash_info_t * info) -{ - short i; - FLASH_WORD_SIZE value; - ulong base = (ulong) addr; - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr; - - /* Write auto select command: read Manufacturer ID */ - asm("isync"); - addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; - asm("isync"); - addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; - asm("isync"); - addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090; - asm("isync"); - - value = addr2[0]; - asm("isync"); - - switch (value) { - case (FLASH_WORD_SIZE) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (FLASH_WORD_SIZE) FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case (FLASH_WORD_SIZE) SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - case (FLASH_WORD_SIZE)STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - printf("Unknown flash manufacturer code: 0x%x at %p\n", - value, addr); - addr2[ADDR0] = (FLASH_WORD_SIZE) 0; - return (0); /* no or unknown flash */ - } - - value = addr2[1]; /* device ID */ - - switch (value) { - case (FLASH_WORD_SIZE) AMD_ID_F040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - case (FLASH_WORD_SIZE) AMD_ID_LV040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - case (FLASH_WORD_SIZE)STM_ID_M29W040B: /* most likele HCU5 chip */ - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* Calculate the sector offsets (Use HCUx Optimized code). */ - flash_get_offsets(base, info); - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, - *(A7 .. A0) = 0x02 - * D0 = 1 if protected - */ - addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]); - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = addr2[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr2 = (FLASH_WORD_SIZE *) info->start[0]; - *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - -int wait_for_DQ7 (flash_info_t * info, int sect) -{ - ulong start, now, last; - volatile FLASH_WORD_SIZE *addr = - (FLASH_WORD_SIZE *) (info->start[sect]); - - start = get_timer (0); - last = start; - while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) != - (FLASH_WORD_SIZE) 0x00800080) { - if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - return 0; -} - -/*-----------------------------------------------------------------------*/ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]); - volatile FLASH_WORD_SIZE *addr2; - int flag, prot, sect, l_sect; - int i; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors not erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (FLASH_WORD_SIZE *) (info->start[sect]); - printf ("Erasing sector %p\n", addr2); /* CLH */ - - if ((info->flash_id & FLASH_VENDMASK) == - FLASH_MAN_SST) { - addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; - /* block erase */ - addr2[0] = (FLASH_WORD_SIZE) 0x00500050; - for (i = 0; i < 50; i++) udelay (1000); - } else { - addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; - /* sector erase */ - addr2[0] = (FLASH_WORD_SIZE) 0x00300030; - } - l_sect = sect; - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7 (info, sect); - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - -#if 0 - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - wait_for_DQ7 (info, l_sect); - -DONE: -#endif - /* reset to read mode */ - addr = (FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < 4 && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i = 0; i < 4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_word (info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile FLASH_WORD_SIZE *addr2 = - (FLASH_WORD_SIZE *) (info->start[0]); - volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest; - volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data; - ulong start; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((*((volatile FLASH_WORD_SIZE *) dest) & - (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) { - return (2); - } - - for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) { - int flag; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; - addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* data polling for D7 */ - start = get_timer (0); - while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) { - - if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { - return (1); - } - } - } - - return (0); -} diff --git a/board/netstal/common/hcu_flash.c b/board/netstal/common/hcu_flash.c new file mode 100644 index 0000000..be2cb37 --- /dev/null +++ b/board/netstal/common/hcu_flash.c @@ -0,0 +1,528 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Modified 4/5/2001 + * Wait for completion of each sector erase command issued + * 4/5/2001 + * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com + * + * Modified 6/6/2007 + * Added isync + * Niklaus Giger, Netstal Maschinen, niklaus.giger@netstal.com + * + */ + +#include +#include +#include + +#if CFG_MAX_FLASH_BANKS != 1 +#error "CFG_MAX_FLASH_BANKS must be 1" +#endif +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (vu_long * addr, flash_info_t * info); +static int write_word (flash_info_t * info, ulong dest, ulong data); +static void flash_get_offsets (ulong base, flash_info_t * info); + +#define ADDR0 0x5555 +#define ADDR1 0x2aaa +#define FLASH_WORD_SIZE unsigned char + +/*-----------------------------------------------------------------------*/ + +unsigned long flash_init (void) +{ + unsigned long size_b0; + + /* Init: no FLASHes known */ + flash_info[0].flash_id = FLASH_UNKNOWN; + + /* Static FLASH Bank configuration here - FIXME XXX */ + + size_b0 = flash_get_size ((vu_long *) FLASH_BASE0_PRELIM, + &flash_info[0]); + + if (flash_info[0].flash_id == FLASH_UNKNOWN) { + printf ("## Unknown FLASH on Bank 0- Size=0x%08lx=%ld MB\n", + size_b0, size_b0 << 20); + } + + /* Only one bank */ + /* Setup offsets */ + flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]); + + /* Monitor protection ON by default */ + (void) flash_protect (FLAG_PROTECT_SET, + FLASH_BASE0_PRELIM, + FLASH_BASE0_PRELIM + monitor_flash_len - 1, + &flash_info[0]); + flash_info[0].size = size_b0; + + return size_b0; +} + + +/*-----------------------------------------------------------------------*/ +/* + * This implementation assumes that the flash chips are uniform sector + * devices. This is true for all likely flash devices on a HCUx. + */ +static void flash_get_offsets (ulong base, flash_info_t * info) +{ + unsigned idx; + unsigned long sector_size = info->size / info->sector_count; + + for (idx = 0; idx < info->sector_count; idx += 1) { + info->start[idx] = base + (idx * sector_size); + } +} + +/*-----------------------------------------------------------------------*/ +void flash_print_info (flash_info_t * info) +{ + int i; + int k; + int size; + int erased; + volatile unsigned long *flash; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: + printf ("AMD "); + break; + case FLASH_MAN_FUJ: + printf ("FUJITSU "); + break; + case FLASH_MAN_SST: + printf ("SST "); + break; + case FLASH_MAN_STM: + printf ("ST Micro "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + /* (Reduced table of only parts expected in HCUx boards.) */ + switch (info->flash_id) { + case FLASH_MAN_AMD | FLASH_AM040: + printf ("AM29F040 (512 Kbit, uniform sector size)\n"); + break; + case FLASH_MAN_STM | FLASH_AM040: + printf ("MM29W040W (512 Kbit, uniform sector size)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + /* + * Check if whole sector is erased + */ + if (i != (info->sector_count - 1)) + size = info->start[i + 1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + erased = 1; + flash = (volatile unsigned long *) info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k = 0; k < size; k++) { + if (*flash++ != 0xffffffff) { + erased = 0; + break; + } + } + + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s%s", + info->start[i], + erased ? " E" : " ", info->protect[i] ? "RO " : " " + ); + } + printf ("\n"); + return; +} + +/*-----------------------------------------------------------------------*/ + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (vu_long * addr, flash_info_t * info) +{ + short i; + FLASH_WORD_SIZE value; + ulong base = (ulong) addr; + volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr; + + /* Write auto select command: read Manufacturer ID */ + asm("isync"); + addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; + asm("isync"); + addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; + asm("isync"); + addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090; + asm("isync"); + + value = addr2[0]; + asm("isync"); + + switch (value) { + case (FLASH_WORD_SIZE) AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + case (FLASH_WORD_SIZE) FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + case (FLASH_WORD_SIZE) SST_MANUFACT: + info->flash_id = FLASH_MAN_SST; + break; + case (FLASH_WORD_SIZE)STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + printf("Unknown flash manufacturer code: 0x%x at %p\n", + value, addr); + addr2[ADDR0] = (FLASH_WORD_SIZE) 0; + return (0); /* no or unknown flash */ + } + + value = addr2[1]; /* device ID */ + + switch (value) { + case (FLASH_WORD_SIZE) AMD_ID_F040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + case (FLASH_WORD_SIZE) AMD_ID_LV040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + case (FLASH_WORD_SIZE)STM_ID_M29W040B: /* most likele HCU5 chip */ + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + default: + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ + + } + + /* Calculate the sector offsets (Use HCUx Optimized code). */ + flash_get_offsets(base, info); + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, + *(A7 .. A0) = 0x02 + * D0 = 1 if protected + */ + addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]); + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) + info->protect[i] = 0; + else + info->protect[i] = addr2[2] & 1; + } + + /* + * Prevent writes to uninitialized FLASH. + */ + if (info->flash_id != FLASH_UNKNOWN) { + addr2 = (FLASH_WORD_SIZE *) info->start[0]; + *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ + } + + return (info->size); +} + +int wait_for_DQ7 (flash_info_t * info, int sect) +{ + ulong start, now, last; + volatile FLASH_WORD_SIZE *addr = + (FLASH_WORD_SIZE *) (info->start[sect]); + + start = get_timer (0); + last = start; + while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) != + (FLASH_WORD_SIZE) 0x00800080) { + if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + return -1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc ('.'); + last = now; + } + } + return 0; +} + +/*-----------------------------------------------------------------------*/ + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]); + volatile FLASH_WORD_SIZE *addr2; + int flag, prot, sect, l_sect; + int i; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors not erased!\n", + prot); + } else { + printf ("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (FLASH_WORD_SIZE *) (info->start[sect]); + printf ("Erasing sector %p\n", addr2); /* CLH */ + + if ((info->flash_id & FLASH_VENDMASK) == + FLASH_MAN_SST) { + addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; + addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080; + addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; + /* block erase */ + addr2[0] = (FLASH_WORD_SIZE) 0x00500050; + for (i = 0; i < 50; i++) udelay (1000); + } else { + addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; + addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080; + addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; + /* sector erase */ + addr2[0] = (FLASH_WORD_SIZE) 0x00300030; + } + l_sect = sect; + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + wait_for_DQ7 (info, sect); + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts (); + + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + +#if 0 + /* + * We wait for the last triggered sector + */ + if (l_sect < 0) + goto DONE; + wait_for_DQ7 (info, l_sect); + +DONE: +#endif + /* reset to read mode */ + addr = (FLASH_WORD_SIZE *) info->start[0]; + addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ + + printf (" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < 4 && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < 4; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i = 0; i < 4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < 4; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return (write_word (info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_word (flash_info_t * info, ulong dest, ulong data) +{ + volatile FLASH_WORD_SIZE *addr2 = + (FLASH_WORD_SIZE *) (info->start[0]); + volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest; + volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data; + ulong start; + int i; + + /* Check if Flash is (sufficiently) erased */ + if ((*((volatile FLASH_WORD_SIZE *) dest) & + (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) { + return (2); + } + + for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) { + int flag; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; + addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; + addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0; + + dest2[i] = data2[i]; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts (); + + /* data polling for D7 */ + start = get_timer (0); + while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) != + (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) { + + if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { + return (1); + } + } + } + + return (0); +} diff --git a/board/netstal/hcu4/Makefile b/board/netstal/hcu4/Makefile index d9825a5..af90821 100644 --- a/board/netstal/hcu4/Makefile +++ b/board/netstal/hcu4/Makefile @@ -22,16 +22,20 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -vpath flash.c ../common -COBJS = $(BOARD).o flash.o +vpath hcu_flash.c ../common + +# NOBJS : Netstal common objects +NOBJS = hcu_flash.o +COBJS = $(BOARD).o SOBJS = -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) +NOBJS := $(addprefix $(obj),$(NOBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(OBJS) $(SOBJS) $(NOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(NOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/netstal/hcu5/Makefile b/board/netstal/hcu5/Makefile index eee310b..27398b9 100644 --- a/board/netstal/hcu5/Makefile +++ b/board/netstal/hcu5/Makefile @@ -22,16 +22,20 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -vpath flash.c ../common -COBJS = $(BOARD).o sdram.o flash.o +vpath hcu_flash.c ../common + +# NOBJS : Netstal common objects +NOBJS = hcu_flash.o +COBJS = $(BOARD).o sdram.o SOBJS = init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) +NOBJS := $(addprefix $(obj),$(NOBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(OBJS) $(SOBJS) $(NOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(NOBJS) clean: rm -f $(SOBJS) $(OBJS) -- cgit v1.1 From 8662577fe36fdb6a44b55b998d9daac6392a736a Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 15 Aug 2007 11:46:22 -0500 Subject: 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h Remove a leftover in net/tftp.c while we're at it. Signed-off-by: Jon Loeliger --- include/configs/sbc8641d.h | 6 +++--- net/tftp.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 68d31ca..277b611 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -492,7 +492,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -513,7 +513,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -525,7 +525,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/net/tftp.c b/net/tftp.c index 888ec98..d6db91c 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -614,4 +614,4 @@ static void parse_multicast_oack(char *pkt, int len) #endif /* Multicast TFTP */ -#endif /* CFG_CMD_NET */ +#endif -- cgit v1.1 From 4ce917742b1e48faa9bf9a9757545e56fb4cfe44 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 15 Aug 2007 12:20:40 -0500 Subject: Move the MPC8641HPCN board under board/freescale. Minor path corrections needed to ensure buildability. Signed-off-by: Jon Loeliger --- Makefile | 2 +- board/freescale/common/sys_eeprom.c | 256 +++++++++++++++++++ board/freescale/mpc8641hpcn/Makefile | 59 +++++ board/freescale/mpc8641hpcn/config.mk | 31 +++ board/freescale/mpc8641hpcn/init.S | 179 +++++++++++++ board/freescale/mpc8641hpcn/mpc8641hpcn.c | 407 ++++++++++++++++++++++++++++++ board/freescale/mpc8641hpcn/u-boot.lds | 136 ++++++++++ board/mpc8641hpcn/Makefile | 58 ----- board/mpc8641hpcn/config.mk | 31 --- board/mpc8641hpcn/init.S | 179 ------------- board/mpc8641hpcn/mpc8641hpcn.c | 407 ------------------------------ board/mpc8641hpcn/sys_eeprom.c | 256 ------------------- board/mpc8641hpcn/u-boot.lds | 136 ---------- 13 files changed, 1069 insertions(+), 1068 deletions(-) create mode 100644 board/freescale/common/sys_eeprom.c create mode 100644 board/freescale/mpc8641hpcn/Makefile create mode 100644 board/freescale/mpc8641hpcn/config.mk create mode 100644 board/freescale/mpc8641hpcn/init.S create mode 100644 board/freescale/mpc8641hpcn/mpc8641hpcn.c create mode 100644 board/freescale/mpc8641hpcn/u-boot.lds delete mode 100644 board/mpc8641hpcn/Makefile delete mode 100644 board/mpc8641hpcn/config.mk delete mode 100644 board/mpc8641hpcn/init.S delete mode 100644 board/mpc8641hpcn/mpc8641hpcn.c delete mode 100644 board/mpc8641hpcn/sys_eeprom.c delete mode 100644 board/mpc8641hpcn/u-boot.lds diff --git a/Makefile b/Makefile index 9dee948..65efd3f 100644 --- a/Makefile +++ b/Makefile @@ -1900,7 +1900,7 @@ TQM8560_config: unconfig ######################################################################### MPC8641HPCN_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn + @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale sbc8641d_config: unconfig @./mkconfig $(@:_config=) ppc mpc86xx sbc8641d diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c new file mode 100644 index 0000000..7bc663b --- /dev/null +++ b/board/freescale/common/sys_eeprom.c @@ -0,0 +1,256 @@ +/* + * Copyright 2006 Freescale Semiconductor + * York Sun (yorksun@freescale.com) + * Haiying Wang (haiying.wang@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#ifdef CFG_ID_EEPROM +typedef struct { + unsigned char id[4]; /* 0x0000 - 0x0003 */ + unsigned char sn[12]; /* 0x0004 - 0x000F */ + unsigned char errata[5]; /* 0x0010 - 0x0014 */ + unsigned char date[7]; /* 0x0015 - 0x001a */ + unsigned char res_1[37]; /* 0x001b - 0x003f */ + unsigned char tab_size; /* 0x0040 */ + unsigned char tab_flag; /* 0x0041 */ + unsigned char mac[8][6]; /* 0x0042 - 0x0071 */ + unsigned char res_2[126]; /* 0x0072 - 0x00ef */ + unsigned int crc; /* 0x00f0 - 0x00f3 crc32 checksum */ +} EEPROM_data; + +static EEPROM_data mac_data; + +int mac_show(void) +{ + int i; + unsigned char ethaddr[8][18]; + + printf("ID %c%c%c%c\n", + mac_data.id[0], + mac_data.id[1], + mac_data.id[2], + mac_data.id[3]); + printf("Errata %c%c%c%c%c\n", + mac_data.errata[0], + mac_data.errata[1], + mac_data.errata[2], + mac_data.errata[3], + mac_data.errata[4]); + printf("Date %c%c%c%c%c%c%c\n", + mac_data.date[0], + mac_data.date[1], + mac_data.date[2], + mac_data.date[3], + mac_data.date[4], + mac_data.date[5], + mac_data.date[6]); + for (i = 0; i < 8; i++) { + sprintf((char *)ethaddr[i], + "%02x:%02x:%02x:%02x:%02x:%02x", + mac_data.mac[i][0], + mac_data.mac[i][1], + mac_data.mac[i][2], + mac_data.mac[i][3], + mac_data.mac[i][4], + mac_data.mac[i][5]); + printf("MAC %d %s\n", i, ethaddr[i]); + } + + setenv("ethaddr", (char *)ethaddr[0]); + setenv("eth1addr", (char *)ethaddr[1]); + setenv("eth2addr", (char *)ethaddr[2]); + setenv("eth3addr", (char *)ethaddr[3]); + + return 0; +} + +int mac_read(void) +{ + int ret, length; + unsigned int crc = 0; + unsigned char dev = ID_EEPROM_ADDR, *data; + + length = sizeof(EEPROM_data); + ret = i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length); + if (ret) { + printf("Read failed.\n"); + return -1; + } + + data = (unsigned char *)(&mac_data); + printf("Check CRC on reading ..."); + crc = crc32(crc, data, length - 4); + if (crc != mac_data.crc) { + printf("CRC checksum is invalid, in EEPROM CRC is %x, calculated CRC is %x\n", + mac_data.crc, crc); + return -1; + } else { + printf("CRC OK\n"); + mac_show(); + } + return 0; +} + +int mac_prog(void) +{ + int ret, i, length; + unsigned int crc = 0; + unsigned char dev = ID_EEPROM_ADDR, *ptr; + unsigned char *eeprom_data = (unsigned char *)(&mac_data); + + for (i = 0; i < sizeof(mac_data.res_1); i++) + mac_data.res_1[i] = 0; + for (i = 0; i < sizeof(mac_data.res_2); i++) + mac_data.res_2[i] = 0; + length = sizeof(EEPROM_data); + crc = crc32(crc, eeprom_data, length - 4); + mac_data.crc = crc; + for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) { + ret = + i2c_write(dev, i, 1, ptr, + (length - i) < 8 ? (length - i) : 8); + udelay(5000); /* 5ms write cycle timing */ + if (ret) + break; + } + if (ret) { + printf("Programming failed.\n"); + return -1; + } else { + printf("Programming %d bytes. Reading back ...\n", length); + mac_read(); + } + return 0; +} + +int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int i; + char cmd = 's'; + unsigned long long mac_val; + + if (i2c_probe(ID_EEPROM_ADDR) != 0) + return -1; + + if (argc > 1) { + cmd = argv[1][0]; + switch (cmd) { + case 'r': /* display */ + mac_read(); + break; + case 's': /* save */ + mac_prog(); + break; + case 'i': /* id */ + for (i = 0; i < 4; i++) { + mac_data.id[i] = argv[2][i]; + } + break; + case 'n': /* serial number */ + for (i = 0; i < 12; i++) { + mac_data.sn[i] = argv[2][i]; + } + break; + case 'e': /* errata */ + for (i = 0; i < 5; i++) { + mac_data.errata[i] = argv[2][i]; + } + break; + case 'd': /* date */ + for (i = 0; i < 7; i++) { + mac_data.date[i] = argv[2][i]; + } + break; + case 'p': /* number of ports */ + mac_data.tab_size = + (unsigned char)simple_strtoul(argv[2], NULL, 16); + break; + case '0': /* mac 0 */ + case '1': /* mac 1 */ + case '2': /* mac 2 */ + case '3': /* mac 3 */ + case '4': /* mac 4 */ + case '5': /* mac 5 */ + case '6': /* mac 6 */ + case '7': /* mac 7 */ + mac_val = simple_strtoull(argv[2], NULL, 16); + for (i = 0; i < 6; i++) { + mac_data.mac[cmd - '0'][i] = + *((unsigned char *) + (((unsigned int)(&mac_val)) + i + 2)); + } + break; + case 'h': /* help */ + default: + printf("Usage:\n%s\n", cmdtp->usage); + break; + } + } else { + mac_show(); + } + return 0; +} + +int mac_read_from_eeprom(void) +{ + int length, i; + unsigned char dev = ID_EEPROM_ADDR; + unsigned char *data; + unsigned char ethaddr[4][18]; + unsigned char enetvar[32]; + unsigned int crc = 0; + + length = sizeof(EEPROM_data); + if (i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length)) { + printf("Read failed.\n"); + return -1; + } + + data = (unsigned char *)(&mac_data); + crc = crc32(crc, data, length - 4); + if (crc != mac_data.crc) { + return -1; + } else { + for (i = 0; i < 4; i++) { + if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) { + sprintf((char *)ethaddr[i], + "%02x:%02x:%02x:%02x:%02x:%02x", + mac_data.mac[i][0], + mac_data.mac[i][1], + mac_data.mac[i][2], + mac_data.mac[i][3], + mac_data.mac[i][4], + mac_data.mac[i][5]); + sprintf((char *)enetvar, + i ? "eth%daddr" : "ethaddr", + i); + setenv((char *)enetvar, (char *)ethaddr[i]); + } + } + } + return 0; +} +#endif /* CFG_ID_EEPROM */ diff --git a/board/freescale/mpc8641hpcn/Makefile b/board/freescale/mpc8641hpcn/Makefile new file mode 100644 index 0000000..93b015d --- /dev/null +++ b/board/freescale/mpc8641hpcn/Makefile @@ -0,0 +1,59 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o \ + ../common/sys_eeprom.o \ + ../common/pixis.o + +SOBJS := init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +.PHONY: distclean +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude ($obj).depend + +######################################################################### diff --git a/board/freescale/mpc8641hpcn/config.mk b/board/freescale/mpc8641hpcn/config.mk new file mode 100644 index 0000000..f778dcb --- /dev/null +++ b/board/freescale/mpc8641hpcn/config.mk @@ -0,0 +1,31 @@ +# Copyright 2004 Freescale Semiconductor. +# Modified by Jeff Brown +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# mpc8641hpcn board +# default CCSRBAR is at 0xff700000 +# assume U-Boot is less than 0.5MB +# +TEXT_BASE = 0xfff00000 + +PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float diff --git a/board/freescale/mpc8641hpcn/init.S b/board/freescale/mpc8641hpcn/init.S new file mode 100644 index 0000000..cb21ba6 --- /dev/null +++ b/board/freescale/mpc8641hpcn/init.S @@ -0,0 +1,179 @@ +/* + * Copyright 2004 Freescale Semiconductor. + * Jeff Brown + * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +/* + * LAW(Local Access Window) configuration: + * + * 0x0000_0000 0x7fff_ffff DDR 2G + * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M + * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M + * 0xc000_0000 0xdfff_ffff RapidIO 512M + * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M + * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M + * 0xf800_0000 0xf80f_ffff CCSRBAR 1M + * 0xf810_0000 0xf81f_ffff PIXIS 1M + * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M + * + * Notes: + * CCSRBAR don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + */ + +#if !defined(CONFIG_SPD_EEPROM) +#define LAWBAR1 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff) +#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#else +#define LAWBAR1 0 +#define LAWAR1 ((LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN) +#endif + +#define LAWBAR2 ((CFG_PCI1_MEM_BASE>>12) & 0xffffff) +#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) + +#define LAWBAR3 ((CFG_PCI2_MEM_BASE>>12) & 0xffffff) +#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) + +/* + * This is not so much the SDRAM map as it is the whole localbus map. + */ +#define LAWBAR4 ((0xf8100000>>12) & 0xffffff) +#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_2M)) + +#define LAWBAR5 ((CFG_PCI1_IO_PHYS>>12) & 0xffffff) +#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M)) + +#define LAWBAR6 ((CFG_PCI2_IO_PHYS>>12) & 0xffffff) +#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M)) + +#define LAWBAR7 ((0xfe000000 >>12) & 0xffffff) +#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M)) + +#if !defined(CONFIG_SPD_EEPROM) +#define LAWBAR8 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff) +#define LAWAR8 (LAWAR_EN | LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#else +#define LAWBAR8 0 +#define LAWAR8 ((LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN) +#endif + +#define LAWBAR9 ((CFG_RIO_MEM_PHYS>>12) & 0xfffff) +#define LAWAR9 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) + + .section .bootpg, "ax" + .globl law_entry +law_entry: + lis r7,CFG_CCSRBAR@h + ori r7,r7,CFG_CCSRBAR@l + + addi r4,r7,0 + addi r5,r7,0 + + /* Skip LAWAR0, start at LAWAR1 */ + lis r6,LAWBAR1@h + ori r6,r6,LAWBAR1@l + stwu r6, 0xc28(r4) + + lis r6,LAWAR1@h + ori r6,r6,LAWAR1@l + stwu r6, 0xc30(r5) + + /* LAWBAR2, LAWAR2 */ + lis r6,LAWBAR2@h + ori r6,r6,LAWBAR2@l + stwu r6, 0x20(r4) + + lis r6,LAWAR2@h + ori r6,r6,LAWAR2@l + stwu r6, 0x20(r5) + + /* LAWBAR3, LAWAR3 */ + lis r6,LAWBAR3@h + ori r6,r6,LAWBAR3@l + stwu r6, 0x20(r4) + + lis r6,LAWAR3@h + ori r6,r6,LAWAR3@l + stwu r6, 0x20(r5) + + /* LAWBAR4, LAWAR4 */ + lis r6,LAWBAR4@h + ori r6,r6,LAWBAR4@l + stwu r6, 0x20(r4) + + lis r6,LAWAR4@h + ori r6,r6,LAWAR4@l + stwu r6, 0x20(r5) + /* LAWBAR5, LAWAR5 */ + lis r6,LAWBAR5@h + ori r6,r6,LAWBAR5@l + stwu r6, 0x20(r4) + + lis r6,LAWAR5@h + ori r6,r6,LAWAR5@l + stwu r6, 0x20(r5) + + /* LAWBAR6, LAWAR6 */ + lis r6,LAWBAR6@h + ori r6,r6,LAWBAR6@l + stwu r6, 0x20(r4) + + lis r6,LAWAR6@h + ori r6,r6,LAWAR6@l + stwu r6, 0x20(r5) + + /* LAWBAR7, LAWAR7 */ + lis r6,LAWBAR7@h + ori r6,r6,LAWBAR7@l + stwu r6, 0x20(r4) + + lis r6,LAWAR7@h + ori r6,r6,LAWAR7@l + stwu r6, 0x20(r5) + + /* LAWBAR8, LAWAR8 */ + lis r6,LAWBAR8@h + ori r6,r6,LAWBAR8@l + stwu r6, 0x20(r4) + + lis r6,LAWAR8@h + ori r6,r6,LAWAR8@l + stwu r6, 0x20(r5) + + /* LAWBAR9, LAWAR9 */ + lis r6,LAWBAR9@h + ori r6,r6,LAWBAR9@l + stwu r6, 0x20(r4) + + lis r6,LAWAR9@h + ori r6,r6,LAWAR9@l + stwu r6, 0x20(r5) + + blr diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c new file mode 100644 index 0000000..ffd11cb --- /dev/null +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -0,0 +1,407 @@ +/* + * Copyright 2006, 2007 Freescale Semiconductor. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_OF_FLAT_TREE) +#include +extern void ft_cpu_setup(void *blob, bd_t *bd); +#endif + +#include "../common/pixis.h" + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif + +#if defined(CONFIG_SPD_EEPROM) +#include "spd_sdram.h" +#endif + +void sdram_init(void); +long int fixed_sdram(void); + + +int board_early_init_f(void) +{ + return 0; +} + +int checkboard(void) +{ + puts("Board: MPC8641HPCN\n"); + + return 0; +} + + +long int +initdram(int board_type) +{ + long dram_size = 0; + +#if defined(CONFIG_SPD_EEPROM) + dram_size = spd_sdram(); +#else + dram_size = fixed_sdram(); +#endif + +#if defined(CFG_RAMBOOT) + puts(" DDR: "); + return dram_size; +#endif + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize and enable DDR ECC. + */ + ddr_enable_ecc(dram_size); +#endif + + puts(" DDR: "); + return dram_size; +} + + +#if defined(CFG_DRAM_TEST) +int +testdram(void) +{ + uint *pstart = (uint *) CFG_MEMTEST_START; + uint *pend = (uint *) CFG_MEMTEST_END; + uint *p; + + puts("SDRAM test phase 1:\n"); + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + puts("SDRAM test phase 2:\n"); + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + puts("SDRAM test passed.\n"); + return 0; +} +#endif + + +#if !defined(CONFIG_SPD_EEPROM) +/* + * Fixed sdram init -- doesn't use serial presence detect. + */ +long int +fixed_sdram(void) +{ +#if !defined(CFG_RAMBOOT) + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile ccsr_ddr_t *ddr = &immap->im_ddr1; + + ddr->cs0_bnds = CFG_DDR_CS0_BNDS; + ddr->cs0_config = CFG_DDR_CS0_CONFIG; + ddr->ext_refrec = CFG_DDR_EXT_REFRESH; + ddr->timing_cfg_0 = CFG_DDR_TIMING_0; + ddr->timing_cfg_1 = CFG_DDR_TIMING_1; + ddr->timing_cfg_2 = CFG_DDR_TIMING_2; + ddr->sdram_mode_1 = CFG_DDR_MODE_1; + ddr->sdram_mode_2 = CFG_DDR_MODE_2; + ddr->sdram_interval = CFG_DDR_INTERVAL; + ddr->sdram_data_init = CFG_DDR_DATA_INIT; + ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL; + ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL; + ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS; + +#if defined (CONFIG_DDR_ECC) + ddr->err_disable = 0x0000008D; + ddr->err_sbe = 0x00ff0000; +#endif + asm("sync;isync"); + + udelay(500); + +#if defined (CONFIG_DDR_ECC) + /* Enable ECC checking */ + ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000); +#else + ddr->sdram_cfg_1 = CFG_DDR_CONTROL; + ddr->sdram_cfg_2 = CFG_DDR_CONTROL2; +#endif + asm("sync; isync"); + + udelay(500); +#endif + return CFG_SDRAM_SIZE * 1024 * 1024; +} +#endif /* !defined(CONFIG_SPD_EEPROM) */ + + +#if defined(CONFIG_PCI) +/* + * Initialize PCI Devices, report devices found. + */ + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_fsl86xxads_config_table[] = { + {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_IDSEL_NUMBER, PCI_ANY_ID, + pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}}, + {} +}; +#endif + + +static struct pci_controller pci1_hose = { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc86xxcts_config_table +#endif +}; +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_PCI2 +static struct pci_controller pci2_hose; +#endif /* CONFIG_PCI2 */ + +int first_free_busno = 0; + + +void pci_init_board(void) +{ + volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; + volatile ccsr_gur_t *gur = &immap->im_gur; + uint devdisr = gur->devdisr; + uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16; + +#ifdef CONFIG_PCI1 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci1_hose; +#ifdef DEBUG + uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17; + uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); +#endif + if ((io_sel == 2 || io_sel == 3 || io_sel == 5 + || io_sel == 6 || io_sel == 7 || io_sel == 0xF) + && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { + debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host"); + debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug(" with errors. Clearing. Now 0x%08x", + pci->pme_msg_det); + } + debug("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; + + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf (" PCI-EXPRESS 1 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + /* + * Activate ULI1575 legacy chip by performing a fake + * memory access. Needed to make ULI RTC work. + */ + in_be32((unsigned *) ((char *)(CFG_PCI1_MEM_BASE + + CFG_PCI1_MEM_SIZE - 0x1000000))); + + } else { + puts("PCI-EXPRESS 1: Disabled\n"); + } +} +#else + puts("PCI-EXPRESS1: Disabled\n"); +#endif /* CONFIG_PCI1 */ + +#ifdef CONFIG_PCI2 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci2_hose; + + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, + CFG_PCI2_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; + + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf (" PCI-EXPRESS 2 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); +} +#else + puts("PCI-EXPRESS 2: Disabled\n"); +#endif /* CONFIG_PCI2 */ + +} + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + ft_cpu_setup(blob, bd); + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +} +#endif + + +/* + * get_board_sys_clk + * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ + */ + +unsigned long +get_board_sys_clk(ulong dummy) +{ + u8 i, go_bit, rd_clks; + ulong val = 0; + + go_bit = in8(PIXIS_BASE + PIXIS_VCTL); + go_bit &= 0x01; + + rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0); + rd_clks &= 0x1C; + + /* + * Only if both go bit and the SCLK bit in VCFGEN0 are set + * should we be using the AUX register. Remember, we also set the + * GO bit to boot from the alternate bank on the on-board flash + */ + + if (go_bit) { + if (rd_clks == 0x1c) + i = in8(PIXIS_BASE + PIXIS_AUX); + else + i = in8(PIXIS_BASE + PIXIS_SPD); + } else { + i = in8(PIXIS_BASE + PIXIS_SPD); + } + + i &= 0x07; + + switch (i) { + case 0: + val = 33000000; + break; + case 1: + val = 40000000; + break; + case 2: + val = 50000000; + break; + case 3: + val = 66000000; + break; + case 4: + val = 83000000; + break; + case 5: + val = 100000000; + break; + case 6: + val = 134000000; + break; + case 7: + val = 166000000; + break; + } + + return val; +} diff --git a/board/freescale/mpc8641hpcn/u-boot.lds b/board/freescale/mpc8641hpcn/u-boot.lds new file mode 100644 index 0000000..fd16362 --- /dev/null +++ b/board/freescale/mpc8641hpcn/u-boot.lds @@ -0,0 +1,136 @@ +/* + * Copyright 2006, 2007 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) + +SECTIONS +{ + + /* Read-only sections, merged into text segment: */ + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc86xx/start.o (.text) + board/freescale/mpc8641hpcn/init.o (.bootpg) + cpu/mpc86xx/traps.o (.text) + cpu/mpc86xx/interrupts.o (.text) + cpu/mpc86xx/cpu_init.o (.text) + cpu/mpc86xx/cpu.o (.text) + cpu/mpc86xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + drivers/bios_emulator/atibios.o (.text) + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/mpc8641hpcn/Makefile b/board/mpc8641hpcn/Makefile deleted file mode 100644 index df56b31..0000000 --- a/board/mpc8641hpcn/Makefile +++ /dev/null @@ -1,58 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../freescale/common) -endif - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o sys_eeprom.o \ - ../freescale/common/pixis.o - -SOBJS := init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(OBJS) $(SOBJS) - -.PHONY: distclean -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude ($obj).depend - -######################################################################### diff --git a/board/mpc8641hpcn/config.mk b/board/mpc8641hpcn/config.mk deleted file mode 100644 index f778dcb..0000000 --- a/board/mpc8641hpcn/config.mk +++ /dev/null @@ -1,31 +0,0 @@ -# Copyright 2004 Freescale Semiconductor. -# Modified by Jeff Brown -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# mpc8641hpcn board -# default CCSRBAR is at 0xff700000 -# assume U-Boot is less than 0.5MB -# -TEXT_BASE = 0xfff00000 - -PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 -PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float diff --git a/board/mpc8641hpcn/init.S b/board/mpc8641hpcn/init.S deleted file mode 100644 index cb21ba6..0000000 --- a/board/mpc8641hpcn/init.S +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * Jeff Brown - * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M - * 0xc000_0000 0xdfff_ffff RapidIO 512M - * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M - * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M - * 0xf800_0000 0xf80f_ffff CCSRBAR 1M - * 0xf810_0000 0xf81f_ffff PIXIS 1M - * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M - * - * Notes: - * CCSRBAR don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -#if !defined(CONFIG_SPD_EEPROM) -#define LAWBAR1 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_256M)) -#else -#define LAWBAR1 0 -#define LAWAR1 ((LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN) -#endif - -#define LAWBAR2 ((CFG_PCI1_MEM_BASE>>12) & 0xffffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR3 ((CFG_PCI2_MEM_BASE>>12) & 0xffffff) -#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -/* - * This is not so much the SDRAM map as it is the whole localbus map. - */ -#define LAWBAR4 ((0xf8100000>>12) & 0xffffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_2M)) - -#define LAWBAR5 ((CFG_PCI1_IO_PHYS>>12) & 0xffffff) -#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M)) - -#define LAWBAR6 ((CFG_PCI2_IO_PHYS>>12) & 0xffffff) -#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M)) - -#define LAWBAR7 ((0xfe000000 >>12) & 0xffffff) -#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M)) - -#if !defined(CONFIG_SPD_EEPROM) -#define LAWBAR8 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff) -#define LAWAR8 (LAWAR_EN | LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_256M)) -#else -#define LAWBAR8 0 -#define LAWAR8 ((LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN) -#endif - -#define LAWBAR9 ((CFG_RIO_MEM_PHYS>>12) & 0xfffff) -#define LAWAR9 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) - - .section .bootpg, "ax" - .globl law_entry -law_entry: - lis r7,CFG_CCSRBAR@h - ori r7,r7,CFG_CCSRBAR@l - - addi r4,r7,0 - addi r5,r7,0 - - /* Skip LAWAR0, start at LAWAR1 */ - lis r6,LAWBAR1@h - ori r6,r6,LAWBAR1@l - stwu r6, 0xc28(r4) - - lis r6,LAWAR1@h - ori r6,r6,LAWAR1@l - stwu r6, 0xc30(r5) - - /* LAWBAR2, LAWAR2 */ - lis r6,LAWBAR2@h - ori r6,r6,LAWBAR2@l - stwu r6, 0x20(r4) - - lis r6,LAWAR2@h - ori r6,r6,LAWAR2@l - stwu r6, 0x20(r5) - - /* LAWBAR3, LAWAR3 */ - lis r6,LAWBAR3@h - ori r6,r6,LAWBAR3@l - stwu r6, 0x20(r4) - - lis r6,LAWAR3@h - ori r6,r6,LAWAR3@l - stwu r6, 0x20(r5) - - /* LAWBAR4, LAWAR4 */ - lis r6,LAWBAR4@h - ori r6,r6,LAWBAR4@l - stwu r6, 0x20(r4) - - lis r6,LAWAR4@h - ori r6,r6,LAWAR4@l - stwu r6, 0x20(r5) - /* LAWBAR5, LAWAR5 */ - lis r6,LAWBAR5@h - ori r6,r6,LAWBAR5@l - stwu r6, 0x20(r4) - - lis r6,LAWAR5@h - ori r6,r6,LAWAR5@l - stwu r6, 0x20(r5) - - /* LAWBAR6, LAWAR6 */ - lis r6,LAWBAR6@h - ori r6,r6,LAWBAR6@l - stwu r6, 0x20(r4) - - lis r6,LAWAR6@h - ori r6,r6,LAWAR6@l - stwu r6, 0x20(r5) - - /* LAWBAR7, LAWAR7 */ - lis r6,LAWBAR7@h - ori r6,r6,LAWBAR7@l - stwu r6, 0x20(r4) - - lis r6,LAWAR7@h - ori r6,r6,LAWAR7@l - stwu r6, 0x20(r5) - - /* LAWBAR8, LAWAR8 */ - lis r6,LAWBAR8@h - ori r6,r6,LAWBAR8@l - stwu r6, 0x20(r4) - - lis r6,LAWAR8@h - ori r6,r6,LAWAR8@l - stwu r6, 0x20(r5) - - /* LAWBAR9, LAWAR9 */ - lis r6,LAWBAR9@h - ori r6,r6,LAWBAR9@l - stwu r6, 0x20(r4) - - lis r6,LAWAR9@h - ori r6,r6,LAWAR9@l - stwu r6, 0x20(r5) - - blr diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c deleted file mode 100644 index 1bfbe88..0000000 --- a/board/mpc8641hpcn/mpc8641hpcn.c +++ /dev/null @@ -1,407 +0,0 @@ -/* - * Copyright 2006, 2007 Freescale Semiconductor. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_OF_FLAT_TREE) -#include -extern void ft_cpu_setup(void *blob, bd_t *bd); -#endif - -#include "../freescale/common/pixis.h" - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - -#if defined(CONFIG_SPD_EEPROM) -#include "spd_sdram.h" -#endif - -void sdram_init(void); -long int fixed_sdram(void); - - -int board_early_init_f(void) -{ - return 0; -} - -int checkboard(void) -{ - puts("Board: MPC8641HPCN\n"); - - return 0; -} - - -long int -initdram(int board_type) -{ - long dram_size = 0; - -#if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram(); -#else - dram_size = fixed_sdram(); -#endif - -#if defined(CFG_RAMBOOT) - puts(" DDR: "); - return dram_size; -#endif - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - puts(" DDR: "); - return dram_size; -} - - -#if defined(CFG_DRAM_TEST) -int -testdram(void) -{ - uint *pstart = (uint *) CFG_MEMTEST_START; - uint *pend = (uint *) CFG_MEMTEST_END; - uint *p; - - puts("SDRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - puts("SDRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - puts("SDRAM test passed.\n"); - return 0; -} -#endif - - -#if !defined(CONFIG_SPD_EEPROM) -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ -long int -fixed_sdram(void) -{ -#if !defined(CFG_RAMBOOT) - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile ccsr_ddr_t *ddr = &immap->im_ddr1; - - ddr->cs0_bnds = CFG_DDR_CS0_BNDS; - ddr->cs0_config = CFG_DDR_CS0_CONFIG; - ddr->ext_refrec = CFG_DDR_EXT_REFRESH; - ddr->timing_cfg_0 = CFG_DDR_TIMING_0; - ddr->timing_cfg_1 = CFG_DDR_TIMING_1; - ddr->timing_cfg_2 = CFG_DDR_TIMING_2; - ddr->sdram_mode_1 = CFG_DDR_MODE_1; - ddr->sdram_mode_2 = CFG_DDR_MODE_2; - ddr->sdram_interval = CFG_DDR_INTERVAL; - ddr->sdram_data_init = CFG_DDR_DATA_INIT; - ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL; - ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL; - ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS; - -#if defined (CONFIG_DDR_ECC) - ddr->err_disable = 0x0000008D; - ddr->err_sbe = 0x00ff0000; -#endif - asm("sync;isync"); - - udelay(500); - -#if defined (CONFIG_DDR_ECC) - /* Enable ECC checking */ - ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000); -#else - ddr->sdram_cfg_1 = CFG_DDR_CONTROL; - ddr->sdram_cfg_2 = CFG_DDR_CONTROL2; -#endif - asm("sync; isync"); - - udelay(500); -#endif - return CFG_SDRAM_SIZE * 1024 * 1024; -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - - -#if defined(CONFIG_PCI) -/* - * Initialize PCI Devices, report devices found. - */ - -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_fsl86xxads_config_table[] = { - {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_IDSEL_NUMBER, PCI_ANY_ID, - pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}}, - {} -}; -#endif - - -static struct pci_controller pci1_hose = { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc86xxcts_config_table -#endif -}; -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_PCI2 -static struct pci_controller pci2_hose; -#endif /* CONFIG_PCI2 */ - -int first_free_busno = 0; - - -void pci_init_board(void) -{ - volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; - volatile ccsr_gur_t *gur = &immap->im_gur; - uint devdisr = gur->devdisr; - uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16; - -#ifdef CONFIG_PCI1 -{ - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); - struct pci_controller *hose = &pci1_hose; -#ifdef DEBUG - uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17; - uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); -#endif - if ((io_sel == 2 || io_sel == 3 || io_sel == 5 - || io_sel == 6 || io_sel == 7 || io_sel == 0xF) - && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { - debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host"); - debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug(" with errors. Clearing. Now 0x%08x", - pci->pme_msg_det); - } - debug("\n"); - - /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 3; - - hose->first_busno=first_free_busno; - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - - first_free_busno=hose->last_busno+1; - printf (" PCI-EXPRESS 1 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - /* - * Activate ULI1575 legacy chip by performing a fake - * memory access. Needed to make ULI RTC work. - */ - in_be32((unsigned *) ((char *)(CFG_PCI1_MEM_BASE - + CFG_PCI1_MEM_SIZE - 0x1000000))); - - } else { - puts("PCI-EXPRESS 1: Disabled\n"); - } -} -#else - puts("PCI-EXPRESS1: Disabled\n"); -#endif /* CONFIG_PCI1 */ - -#ifdef CONFIG_PCI2 -{ - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); - struct pci_controller *hose = &pci2_hose; - - - /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI2_MEM_BASE, - CFG_PCI2_MEM_PHYS, - CFG_PCI2_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI2_IO_BASE, - CFG_PCI2_IO_PHYS, - CFG_PCI2_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 3; - - hose->first_busno=first_free_busno; - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - - first_free_busno=hose->last_busno+1; - printf (" PCI-EXPRESS 2 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); -} -#else - puts("PCI-EXPRESS 2: Disabled\n"); -#endif /* CONFIG_PCI2 */ - -} - -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) -{ - u32 *p; - int len; - - ft_cpu_setup(blob, bd); - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -} -#endif - - -/* - * get_board_sys_clk - * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ - */ - -unsigned long -get_board_sys_clk(ulong dummy) -{ - u8 i, go_bit, rd_clks; - ulong val = 0; - - go_bit = in8(PIXIS_BASE + PIXIS_VCTL); - go_bit &= 0x01; - - rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0); - rd_clks &= 0x1C; - - /* - * Only if both go bit and the SCLK bit in VCFGEN0 are set - * should we be using the AUX register. Remember, we also set the - * GO bit to boot from the alternate bank on the on-board flash - */ - - if (go_bit) { - if (rd_clks == 0x1c) - i = in8(PIXIS_BASE + PIXIS_AUX); - else - i = in8(PIXIS_BASE + PIXIS_SPD); - } else { - i = in8(PIXIS_BASE + PIXIS_SPD); - } - - i &= 0x07; - - switch (i) { - case 0: - val = 33000000; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66000000; - break; - case 4: - val = 83000000; - break; - case 5: - val = 100000000; - break; - case 6: - val = 134000000; - break; - case 7: - val = 166000000; - break; - } - - return val; -} diff --git a/board/mpc8641hpcn/sys_eeprom.c b/board/mpc8641hpcn/sys_eeprom.c deleted file mode 100644 index 7bc663b..0000000 --- a/board/mpc8641hpcn/sys_eeprom.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * Copyright 2006 Freescale Semiconductor - * York Sun (yorksun@freescale.com) - * Haiying Wang (haiying.wang@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#ifdef CFG_ID_EEPROM -typedef struct { - unsigned char id[4]; /* 0x0000 - 0x0003 */ - unsigned char sn[12]; /* 0x0004 - 0x000F */ - unsigned char errata[5]; /* 0x0010 - 0x0014 */ - unsigned char date[7]; /* 0x0015 - 0x001a */ - unsigned char res_1[37]; /* 0x001b - 0x003f */ - unsigned char tab_size; /* 0x0040 */ - unsigned char tab_flag; /* 0x0041 */ - unsigned char mac[8][6]; /* 0x0042 - 0x0071 */ - unsigned char res_2[126]; /* 0x0072 - 0x00ef */ - unsigned int crc; /* 0x00f0 - 0x00f3 crc32 checksum */ -} EEPROM_data; - -static EEPROM_data mac_data; - -int mac_show(void) -{ - int i; - unsigned char ethaddr[8][18]; - - printf("ID %c%c%c%c\n", - mac_data.id[0], - mac_data.id[1], - mac_data.id[2], - mac_data.id[3]); - printf("Errata %c%c%c%c%c\n", - mac_data.errata[0], - mac_data.errata[1], - mac_data.errata[2], - mac_data.errata[3], - mac_data.errata[4]); - printf("Date %c%c%c%c%c%c%c\n", - mac_data.date[0], - mac_data.date[1], - mac_data.date[2], - mac_data.date[3], - mac_data.date[4], - mac_data.date[5], - mac_data.date[6]); - for (i = 0; i < 8; i++) { - sprintf((char *)ethaddr[i], - "%02x:%02x:%02x:%02x:%02x:%02x", - mac_data.mac[i][0], - mac_data.mac[i][1], - mac_data.mac[i][2], - mac_data.mac[i][3], - mac_data.mac[i][4], - mac_data.mac[i][5]); - printf("MAC %d %s\n", i, ethaddr[i]); - } - - setenv("ethaddr", (char *)ethaddr[0]); - setenv("eth1addr", (char *)ethaddr[1]); - setenv("eth2addr", (char *)ethaddr[2]); - setenv("eth3addr", (char *)ethaddr[3]); - - return 0; -} - -int mac_read(void) -{ - int ret, length; - unsigned int crc = 0; - unsigned char dev = ID_EEPROM_ADDR, *data; - - length = sizeof(EEPROM_data); - ret = i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length); - if (ret) { - printf("Read failed.\n"); - return -1; - } - - data = (unsigned char *)(&mac_data); - printf("Check CRC on reading ..."); - crc = crc32(crc, data, length - 4); - if (crc != mac_data.crc) { - printf("CRC checksum is invalid, in EEPROM CRC is %x, calculated CRC is %x\n", - mac_data.crc, crc); - return -1; - } else { - printf("CRC OK\n"); - mac_show(); - } - return 0; -} - -int mac_prog(void) -{ - int ret, i, length; - unsigned int crc = 0; - unsigned char dev = ID_EEPROM_ADDR, *ptr; - unsigned char *eeprom_data = (unsigned char *)(&mac_data); - - for (i = 0; i < sizeof(mac_data.res_1); i++) - mac_data.res_1[i] = 0; - for (i = 0; i < sizeof(mac_data.res_2); i++) - mac_data.res_2[i] = 0; - length = sizeof(EEPROM_data); - crc = crc32(crc, eeprom_data, length - 4); - mac_data.crc = crc; - for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) { - ret = - i2c_write(dev, i, 1, ptr, - (length - i) < 8 ? (length - i) : 8); - udelay(5000); /* 5ms write cycle timing */ - if (ret) - break; - } - if (ret) { - printf("Programming failed.\n"); - return -1; - } else { - printf("Programming %d bytes. Reading back ...\n", length); - mac_read(); - } - return 0; -} - -int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ - int i; - char cmd = 's'; - unsigned long long mac_val; - - if (i2c_probe(ID_EEPROM_ADDR) != 0) - return -1; - - if (argc > 1) { - cmd = argv[1][0]; - switch (cmd) { - case 'r': /* display */ - mac_read(); - break; - case 's': /* save */ - mac_prog(); - break; - case 'i': /* id */ - for (i = 0; i < 4; i++) { - mac_data.id[i] = argv[2][i]; - } - break; - case 'n': /* serial number */ - for (i = 0; i < 12; i++) { - mac_data.sn[i] = argv[2][i]; - } - break; - case 'e': /* errata */ - for (i = 0; i < 5; i++) { - mac_data.errata[i] = argv[2][i]; - } - break; - case 'd': /* date */ - for (i = 0; i < 7; i++) { - mac_data.date[i] = argv[2][i]; - } - break; - case 'p': /* number of ports */ - mac_data.tab_size = - (unsigned char)simple_strtoul(argv[2], NULL, 16); - break; - case '0': /* mac 0 */ - case '1': /* mac 1 */ - case '2': /* mac 2 */ - case '3': /* mac 3 */ - case '4': /* mac 4 */ - case '5': /* mac 5 */ - case '6': /* mac 6 */ - case '7': /* mac 7 */ - mac_val = simple_strtoull(argv[2], NULL, 16); - for (i = 0; i < 6; i++) { - mac_data.mac[cmd - '0'][i] = - *((unsigned char *) - (((unsigned int)(&mac_val)) + i + 2)); - } - break; - case 'h': /* help */ - default: - printf("Usage:\n%s\n", cmdtp->usage); - break; - } - } else { - mac_show(); - } - return 0; -} - -int mac_read_from_eeprom(void) -{ - int length, i; - unsigned char dev = ID_EEPROM_ADDR; - unsigned char *data; - unsigned char ethaddr[4][18]; - unsigned char enetvar[32]; - unsigned int crc = 0; - - length = sizeof(EEPROM_data); - if (i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length)) { - printf("Read failed.\n"); - return -1; - } - - data = (unsigned char *)(&mac_data); - crc = crc32(crc, data, length - 4); - if (crc != mac_data.crc) { - return -1; - } else { - for (i = 0; i < 4; i++) { - if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) { - sprintf((char *)ethaddr[i], - "%02x:%02x:%02x:%02x:%02x:%02x", - mac_data.mac[i][0], - mac_data.mac[i][1], - mac_data.mac[i][2], - mac_data.mac[i][3], - mac_data.mac[i][4], - mac_data.mac[i][5]); - sprintf((char *)enetvar, - i ? "eth%daddr" : "ethaddr", - i); - setenv((char *)enetvar, (char *)ethaddr[i]); - } - } - } - return 0; -} -#endif /* CFG_ID_EEPROM */ diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds deleted file mode 100644 index 5864464..0000000 --- a/board/mpc8641hpcn/u-boot.lds +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Copyright 2006, 2007 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - - /* Read-only sections, merged into text segment: */ - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/mpc86xx/start.o (.text) - board/mpc8641hpcn/init.o (.bootpg) - cpu/mpc86xx/traps.o (.text) - cpu/mpc86xx/interrupts.o (.text) - cpu/mpc86xx/cpu_init.o (.text) - cpu/mpc86xx/cpu.o (.text) - cpu/mpc86xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - drivers/bios_emulator/atibios.o (.text) - *(.text) - *(.fixup) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); -} -- cgit v1.1 From 30b52df9e906bf0e465916c2c6bb5192b438e0b8 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 15 Aug 2007 11:55:35 -0500 Subject: 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h Remove a leftover in net/tftp.c while we're at it. Signed-off-by: Jon Loeliger --- include/configs/sbc8641d.h | 6 +++--- net/tftp.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 68d31ca..277b611 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -492,7 +492,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -513,7 +513,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -525,7 +525,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/net/tftp.c b/net/tftp.c index 888ec98..d6db91c 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -614,4 +614,4 @@ static void parse_multicast_oack(char *pkt, int len) #endif /* Multicast TFTP */ -#endif /* CFG_CMD_NET */ +#endif -- cgit v1.1 From 19fa1c35368484d4ed10ddce8a7793c21862e3a3 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 15 Aug 2007 22:30:05 -0500 Subject: mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb and reorder the existing 83xx maintainers alpha. Signed-off-by: Kim Phillips --- MAINTAINERS | 30 +++++++++++++++++------------- MAKEALL | 1 + 2 files changed, 18 insertions(+), 13 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f812431..3371e0f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -42,6 +42,10 @@ Yuli Barcohen Rattler MPC8248 ZPC1900 MPC8265 +Michael Barkowski + + MPC8323ERDB MPC8323 + Jerry Van Baren sacsng MPC8260 @@ -217,6 +221,10 @@ The LEOX team ELPT860 MPC860T +Dave Liu + + MPC8360EMDS MPC8360 + Nye Liu ZUMA MPC7xx_74xx @@ -273,6 +281,10 @@ Denis Peter MIP405 PPC4xx PIP405 PPC4xx +Kim Phillips + + MPC8349EMDS MPC8349 + Daniel Poirot sbc8240 MPC8240 @@ -320,6 +332,11 @@ Peter De Schrijver ML2 PPC4xx +Timur Tabi + + MPC8349E-mITX MPC8349 + MPC8349E-mITX-GP MPC8349 + Erik Theisen W7OLMC PPC4xx @@ -352,19 +369,6 @@ John Zhan svm_sc8xx MPC8xx -Timur Tabi - - MPC8349E-mITX MPC8349 - MPC8349E-mITX-GP MPC8349 - -Kim Phillips - - MPC8349EMDS MPC8349 - -Dave Liu - - MPC8360EMDS MPC8360 - ------------------------------------------------------------------------- Unknown / orphaned boards: diff --git a/MAKEALL b/MAKEALL index 1219fb3..d50ff8b 100755 --- a/MAKEALL +++ b/MAKEALL @@ -298,6 +298,7 @@ LIST_8260=" \ LIST_83xx=" \ MPC8313ERDB_33 \ MPC8313ERDB_66 \ + MPC8323ERDB \ MPC832XEMDS \ MPC8349EMDS \ MPC8349ITX \ -- cgit v1.1 From f4b2ac5ed9aaff9920d487bff8a59696c083a524 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 15 Aug 2007 22:30:12 -0500 Subject: mpc83xx: fix UEC2->1 typo in libfdt setup code Signed-off-by: Kim Phillips --- cpu/mpc83xx/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index adf8083..a0754d1 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -481,7 +481,7 @@ static const struct { "local-mac-address", fdt_set_eth1 }, -#elif CFG_UEC1_UCC_NUM == 3 /* UCC4 */ +#elif CFG_UEC2_UCC_NUM == 3 /* UCC4 */ { "/" OF_QE "/ucc@3200", "mac-address", fdt_set_eth1 -- cgit v1.1 From 8f9e0e9f339aee4ce31a338d5f27356eb5457f85 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 15 Aug 2007 22:30:19 -0500 Subject: mpc83xx: remaining 8360 libfdt fixes PCI clocks and QE frequencies weren't being updated, and the core clock was being updated incorrectly. This patch also adds a /memory node if it doesn't already exist prior to update. plus some cosmetic trimming to single line comments. Signed-off-by: Kim Phillips --- board/mpc8360emds/mpc8360emds.c | 8 +++++ board/mpc8360emds/pci.c | 8 +++-- cpu/mpc83xx/cpu.c | 66 ++++++++++++++++++++++++++++------------- cpu/mpc83xx/speed.c | 1 + 4 files changed, 61 insertions(+), 22 deletions(-) diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index 3fa093d..e37d2dc 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -305,7 +305,15 @@ ft_board_setup(void *blob, bd_t *bd) int tmp[2]; nodeoffset = fdt_find_node_by_path(blob, "/memory"); + if (nodeoffset < 0) { + nodeoffset = fdt_add_subnode(blob, 0, "memory"); + if (nodeoffset < 0) + printf("WARNING: failed to add /memory node: %s\n", + fdt_strerror(nodeoffset)); + } if (nodeoffset >= 0) { + fdt_setprop(blob, nodeoffset, "device_type", + "memory", sizeof("memory")); tmp[0] = cpu_to_be32(bd->bi_memstart); tmp[1] = cpu_to_be32(bd->bi_memsize); fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp)); diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c index 8f90471..7981285 100644 --- a/board/mpc8360emds/pci.c +++ b/board/mpc8360emds/pci.c @@ -22,7 +22,6 @@ #include #elif defined(CONFIG_OF_LIBFDT) #include -#include #endif #include @@ -314,7 +313,12 @@ ft_pci_setup(void *blob, bd_t *bd) if (nodeoffset >= 0) { tmp[0] = cpu_to_be32(hose[0].first_busno); tmp[1] = cpu_to_be32(hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp)); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); } } #elif defined(CONFIG_OF_FLAT_TREE) diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index a0754d1..4deb5e5 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -35,12 +35,10 @@ #include #elif defined(CONFIG_OF_LIBFDT) #include -#include #endif DECLARE_GLOBAL_DATA_PTR; - int checkcpu(void) { volatile immap_t *immr; @@ -333,9 +331,7 @@ void watchdog_reset (void) */ static int fdt_set_eth0(void *blob, int nodeoffset, const char *name, bd_t *bd) { - /* - * Fix it up if it exists, don't create it if it doesn't exist. - */ + /* Fix it up if it exists, don't create it if it doesn't exist */ if (fdt_get_property(blob, nodeoffset, name, 0)) { return fdt_setprop(blob, nodeoffset, name, bd->bi_enetaddr, 6); } @@ -345,9 +341,7 @@ static int fdt_set_eth0(void *blob, int nodeoffset, const char *name, bd_t *bd) /* second onboard ethernet port */ static int fdt_set_eth1(void *blob, int nodeoffset, const char *name, bd_t *bd) { - /* - * Fix it up if it exists, don't create it if it doesn't exist. - */ + /* Fix it up if it exists, don't create it if it doesn't exist */ if (fdt_get_property(blob, nodeoffset, name, 0)) { return fdt_setprop(blob, nodeoffset, name, bd->bi_enet1addr, 6); } @@ -358,9 +352,7 @@ static int fdt_set_eth1(void *blob, int nodeoffset, const char *name, bd_t *bd) /* third onboard ethernet port */ static int fdt_set_eth2(void *blob, int nodeoffset, const char *name, bd_t *bd) { - /* - * Fix it up if it exists, don't create it if it doesn't exist. - */ + /* Fix it up if it exists, don't create it if it doesn't exist */ if (fdt_get_property(blob, nodeoffset, name, 0)) { return fdt_setprop(blob, nodeoffset, name, bd->bi_enet2addr, 6); } @@ -371,9 +363,7 @@ static int fdt_set_eth2(void *blob, int nodeoffset, const char *name, bd_t *bd) /* fourth onboard ethernet port */ static int fdt_set_eth3(void *blob, int nodeoffset, const char *name, bd_t *bd) { - /* - * Fix it up if it exists, don't create it if it doesn't exist. - */ + /* Fix it up if it exists, don't create it if it doesn't exist */ if (fdt_get_property(blob, nodeoffset, name, 0)) { return fdt_setprop(blob, nodeoffset, name, bd->bi_enet3addr, 6); } @@ -384,9 +374,7 @@ static int fdt_set_eth3(void *blob, int nodeoffset, const char *name, bd_t *bd) static int fdt_set_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd) { u32 tmp; - /* - * Create or update the property. - */ + /* Create or update the property */ tmp = cpu_to_be32(bd->bi_busfreq); return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp)); } @@ -394,14 +382,38 @@ static int fdt_set_busfreq(void *blob, int nodeoffset, const char *name, bd_t *b static int fdt_set_tbfreq(void *blob, int nodeoffset, const char *name, bd_t *bd) { u32 tmp; - /* - * Create or update the property. - */ + /* Create or update the property */ tmp = cpu_to_be32(OF_TBCLK); return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp)); } +static int fdt_set_clockfreq(void *blob, int nodeoffset, const char *name, bd_t *bd) +{ + u32 tmp; + /* Create or update the property */ + tmp = cpu_to_be32(gd->core_clk); + return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp)); +} + +#ifdef CONFIG_QE +static int fdt_set_qe_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd) +{ + u32 tmp; + /* Create or update the property */ + tmp = cpu_to_be32(gd->qe_clk); + return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp)); +} + +static int fdt_set_qe_brgfreq(void *blob, int nodeoffset, const char *name, bd_t *bd) +{ + u32 tmp; + /* Create or update the property */ + tmp = cpu_to_be32(gd->brg_clk); + return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp)); +} +#endif + /* * Fixups to the fdt. */ @@ -420,6 +432,10 @@ static const struct { }, { "/cpus/" OF_CPU, "clock-frequency", + fdt_set_clockfreq + }, + { "/" OF_SOC, + "bus-frequency", fdt_set_busfreq }, { "/" OF_SOC "/serial@4500", @@ -450,6 +466,15 @@ static const struct { fdt_set_eth1 }, #endif +#ifdef CONFIG_QE + { "/" OF_QE, + "brg-frequency", + fdt_set_qe_brgfreq + }, + { "/" OF_QE, + "bus-frequency", + fdt_set_qe_busfreq + }, #ifdef CONFIG_UEC_ETH1 #if CFG_UEC1_UCC_NUM == 0 /* UCC1 */ { "/" OF_QE "/ucc@2000", @@ -492,6 +517,7 @@ static const struct { }, #endif #endif /* CONFIG_UEC_ETH2 */ +#endif /* CONFIG_QE */ }; void diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index bf30616..cba57fa 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -351,6 +351,7 @@ int get_clocks(void) gd->qe_clk = qe_clk; gd->brg_clk = brg_clk; #endif + gd->pci_clk = pci_sync_in; gd->cpu_clk = gd->core_clk; gd->bus_clk = gd->csb_clk; return 0; -- cgit v1.1 From 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 15 Aug 2007 22:30:26 -0500 Subject: mpc83xx: move common /memory node update mechanism to cpu.c also adds common prototypes to include/common.h. Signed-off-by: Kim Phillips --- board/freescale/mpc8323erdb/mpc8323erdb.c | 22 ---------------------- board/mpc8360emds/mpc8360emds.c | 31 +------------------------------ cpu/mpc83xx/cpu.c | 31 +++++++++++++++++++++++-------- include/common.h | 7 +++++++ 4 files changed, 31 insertions(+), 60 deletions(-) diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index 1886f19..81b82b7 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -17,7 +17,6 @@ #include #include #include -#include #if defined(CONFIG_PCI) #include #endif @@ -185,31 +184,10 @@ void pci_init_board(void) } #if defined(CONFIG_OF_BOARD_SETUP) - -/* - * Prototypes of functions that we use. - */ -void ft_cpu_setup(void *blob, bd_t *bd); - -#ifdef CONFIG_PCI -void ft_pci_setup(void *blob, bd_t *bd); -#endif - void ft_board_setup(void *blob, bd_t *bd) { - int nodeoffset; - int tmp[2]; - - nodeoffset = fdt_find_node_by_path(blob, "/memory"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(bd->bi_memstart); - tmp[1] = cpu_to_be32(bd->bi_memsize); - fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp)); - } - ft_cpu_setup(blob, bd); - #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index e37d2dc..eec46fb 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -29,7 +29,6 @@ #include #elif defined(CONFIG_OF_LIBFDT) #include -#include #endif const qe_iop_conf_t qe_iop_conf_tab[] = { @@ -287,38 +286,10 @@ void sdram_init(void) #if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \ && defined(CONFIG_OF_BOARD_SETUP) - -/* - * Prototypes of functions that we use. - */ -void ft_cpu_setup(void *blob, bd_t *bd); - -#ifdef CONFIG_PCI -void ft_pci_setup(void *blob, bd_t *bd); -#endif - void ft_board_setup(void *blob, bd_t *bd) { -#if defined(CONFIG_OF_LIBFDT) - int nodeoffset; - int tmp[2]; - - nodeoffset = fdt_find_node_by_path(blob, "/memory"); - if (nodeoffset < 0) { - nodeoffset = fdt_add_subnode(blob, 0, "memory"); - if (nodeoffset < 0) - printf("WARNING: failed to add /memory node: %s\n", - fdt_strerror(nodeoffset)); - } - if (nodeoffset >= 0) { - fdt_setprop(blob, nodeoffset, "device_type", - "memory", sizeof("memory")); - tmp[0] = cpu_to_be32(bd->bi_memstart); - tmp[1] = cpu_to_be32(bd->bi_memsize); - fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp)); - } -#else +#if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 4deb5e5..e634f0a 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -523,9 +523,10 @@ static const struct { void ft_cpu_setup(void *blob, bd_t *bd) { - int nodeoffset; - int err; - int j; + int nodeoffset; + int err; + int j; + int tmp[2]; for (j = 0; j < (sizeof(fixup_props) / sizeof(fixup_props[0])); j++) { nodeoffset = fdt_find_node_by_path(blob, fixup_props[j].node); @@ -534,15 +535,29 @@ ft_cpu_setup(void *blob, bd_t *bd) fixup_props[j].prop, bd); if (err < 0) debug("Problem setting %s = %s: %s\n", - fixup_props[j].node, - fixup_props[j].prop, - fdt_strerror(err)); + fixup_props[j].node, fixup_props[j].prop, + fdt_strerror(err)); } else { debug("Couldn't find %s: %s\n", - fixup_props[j].node, - fdt_strerror(nodeoffset)); + fixup_props[j].node, fdt_strerror(nodeoffset)); } } + + /* update, or add and update /memory node */ + nodeoffset = fdt_find_node_by_path(blob, "/memory"); + if (nodeoffset < 0) { + nodeoffset = fdt_add_subnode(blob, 0, "memory"); + if (nodeoffset < 0) + debug("failed to add /memory node: %s\n", + fdt_strerror(nodeoffset)); + } + if (nodeoffset >= 0) { + fdt_setprop(blob, nodeoffset, "device_type", + "memory", sizeof("memory")); + tmp[0] = cpu_to_be32(bd->bi_memstart); + tmp[1] = cpu_to_be32(bd->bi_memsize); + fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp)); + } } #elif defined(CONFIG_OF_FLAT_TREE) void diff --git a/include/common.h b/include/common.h index 27a660a..9a5a0ab 100644 --- a/include/common.h +++ b/include/common.h @@ -434,6 +434,13 @@ int checkdcache (void); void upmconfig (unsigned int, unsigned int *, unsigned int); ulong get_tbclk (void); void reset_cpu (ulong addr); +#if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP) +void ft_cpu_setup(void *blob, bd_t *bd); +#ifdef CONFIG_PCI +void ft_pci_setup(void *blob, bd_t *bd); +#endif +#endif + /* $(CPU)/serial.c */ int serial_init (void); -- cgit v1.1 From 3fde9e8b22cfbd7af489214758f9839a206576cb Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 15 Aug 2007 22:30:33 -0500 Subject: mpc83xx: migrate remaining freescale boards to libfdt this adds libfdt support code for the freescale mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx, and gp boards. Boards remain compatible with OF_FLAT_TREE. Signed-off-by: Kim Phillips --- board/freescale/mpc8323erdb/mpc8323erdb.c | 15 ++++++++--- board/mpc8313erdb/mpc8313erdb.c | 19 ++++++++------ board/mpc832xemds/mpc832xemds.c | 18 ++++++++------ board/mpc832xemds/pci.c | 24 +++++++++++++++++- board/mpc8349emds/mpc8349emds.c | 18 ++++++++------ board/mpc8349emds/pci.c | 41 ++++++++++++++++++++++++++++++- board/mpc8349itx/mpc8349itx.c | 18 ++++++++------ board/mpc8349itx/pci.c | 39 +++++++++++++++++++++++++++-- board/mpc8360emds/mpc8360emds.c | 11 +++------ cpu/mpc83xx/pci.c | 15 ++++++++--- 10 files changed, 170 insertions(+), 48 deletions(-) diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index 81b82b7..850d1c3 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -184,12 +184,21 @@ void pci_init_board(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +void ft_board_setup(void *blob, bd_t *bd) { +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif } -#endif /* CONFIG_OF_BOARD_SETUP */ +#endif diff --git a/board/mpc8313erdb/mpc8313erdb.c b/board/mpc8313erdb/mpc8313erdb.c index 999fe9e..861c143 100644 --- a/board/mpc8313erdb/mpc8313erdb.c +++ b/board/mpc8313erdb/mpc8313erdb.c @@ -23,7 +23,11 @@ */ #include +#if defined(CONFIG_OF_FLAT_TREE) #include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif #include #include @@ -96,21 +100,22 @@ void pci_init_board(void) mpc83xx_pci_init(1, reg, warmboot); } -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +#if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { +#if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); - if (p) { + if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif } #endif diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c index 772da67..f70783e 100644 --- a/board/mpc832xemds/mpc832xemds.c +++ b/board/mpc832xemds/mpc832xemds.c @@ -29,6 +29,8 @@ #endif #if defined(CONFIG_OF_FLAT_TREE) #include +#elif defined(CONFIG_OF_LIBFDT) +#include #endif const qe_iop_conf_t qe_iop_conf_tab[] = { @@ -155,22 +157,22 @@ int checkboard(void) return 0; } -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) { +#if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif } #endif diff --git a/board/mpc832xemds/pci.c b/board/mpc832xemds/pci.c index d0a407a..c2f61ea 100644 --- a/board/mpc832xemds/pci.c +++ b/board/mpc832xemds/pci.c @@ -20,6 +20,8 @@ #include #if defined(CONFIG_OF_FLAT_TREE) #include +#elif defined(CONFIG_OF_LIBFDT) +#include #endif #include @@ -299,7 +301,27 @@ void pci_init_board(void) } #endif /* CONFIG_PCISLAVE */ -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(hose[0].first_busno); + tmp[1] = cpu_to_be32(hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +} +#elif defined(CONFIG_OF_FLAT_TREE) void ft_pci_setup(void *blob, bd_t *bd) { diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c index 521d1bb..2ad25ec 100644 --- a/board/mpc8349emds/mpc8349emds.c +++ b/board/mpc8349emds/mpc8349emds.c @@ -34,6 +34,8 @@ #endif #if defined(CONFIG_OF_FLAT_TREE) #include +#elif defined(CONFIG_OF_LIBFDT) +#include #endif int fixed_sdram(void); @@ -257,22 +259,22 @@ void sdram_init(void) } #endif -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) { +#if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif } #endif diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c index d6a12b8..ae94a2f 100644 --- a/board/mpc8349emds/pci.c +++ b/board/mpc8349emds/pci.c @@ -25,6 +25,12 @@ #include #include #include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + DECLARE_GLOBAL_DATA_PTR; @@ -382,7 +388,40 @@ pci_init_board(void) } -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[0].first_busno); + tmp[1] = cpu_to_be32(pci_hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#ifdef CONFIG_MPC83XX_PCI2 + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[1].first_busno); + tmp[1] = cpu_to_be32(pci_hose[1].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#endif +} +#elif defined(CONFIG_OF_FLAT_TREE) void ft_pci_setup(void *blob, bd_t *bd) { diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c index 178b1d3..125e6c0 100644 --- a/board/mpc8349itx/mpc8349itx.c +++ b/board/mpc8349itx/mpc8349itx.c @@ -39,6 +39,8 @@ #endif #if defined(CONFIG_OF_FLAT_TREE) #include +#elif defined(CONFIG_OF_LIBFDT) +#include #endif #ifndef CONFIG_SPD_EEPROM @@ -385,22 +387,22 @@ int misc_init_r(void) return rc; } -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) { +#if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif } #endif diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c index e81ad27..5ca094d 100644 --- a/board/mpc8349itx/pci.c +++ b/board/mpc8349itx/pci.c @@ -31,6 +31,8 @@ #include #if defined(CONFIG_OF_FLAT_TREE) #include +#elif defined(CONFIG_OF_LIBFDT) +#include #endif DECLARE_GLOBAL_DATA_PTR; @@ -332,8 +334,40 @@ void pci_init_board(void) #endif } -#endif /* CONFIG_PCI */ -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[0].first_busno); + tmp[1] = cpu_to_be32(pci_hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#ifdef CONFIG_MPC83XX_PCI2 + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[1].first_busno); + tmp[1] = cpu_to_be32(pci_hose[1].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#endif +} +#elif defined(CONFIG_OF_FLAT_TREE) void ft_pci_setup(void *blob, bd_t *bd) { @@ -355,3 +389,4 @@ ft_pci_setup(void *blob, bd_t *bd) #endif } #endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index eec46fb..3861733 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -284,10 +284,8 @@ void sdram_init(void) } #endif -#if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \ - && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) { #if defined(CONFIG_OF_FLAT_TREE) u32 *p; @@ -299,10 +297,9 @@ ft_board_setup(void *blob, bd_t *bd) *p = cpu_to_be32(bd->bi_memsize); } #endif - + ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif - ft_cpu_setup(blob, bd); } -#endif /* CONFIG_OF_x */ +#endif diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c index 2298218..5675afe 100644 --- a/cpu/mpc83xx/pci.c +++ b/cpu/mpc83xx/pci.c @@ -28,7 +28,6 @@ #if defined(CONFIG_OF_LIBFDT) #include -#include #elif defined(CONFIG_OF_FLAT_TREE) #include #endif @@ -184,7 +183,12 @@ void ft_pci_setup(void *blob, bd_t *bd) if (nodeoffset >= 0) { tmp[0] = cpu_to_be32(pci_hose[0].first_busno); tmp[1] = cpu_to_be32(pci_hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp)); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); } if (pci_num_buses < 2) @@ -194,7 +198,12 @@ void ft_pci_setup(void *blob, bd_t *bd) if (nodeoffset >= 0) { tmp[0] = cpu_to_be32(pci_hose[0].first_busno); tmp[1] = cpu_to_be32(pci_hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp)); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); } } #elif CONFIG_OF_FLAT_TREE -- cgit v1.1 From 35cc4e4823668e8745854899cfaedd4489beb0ef Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 15 Aug 2007 22:30:39 -0500 Subject: mpc83xx: enable libfdt by default on freescale boards this enables libfdt code by default for the freescale mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx and gp boards. Signed-off-by: Kim Phillips --- include/configs/MPC8313ERDB.h | 2 +- include/configs/MPC832XEMDS.h | 2 +- include/configs/MPC8349EMDS.h | 2 +- include/configs/MPC8349ITX.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 81db96f..e2ec0bc 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -228,7 +228,7 @@ #define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 /* maximum size of the flat tree (8K) */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index f62ca2c..e8c6b75 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -315,7 +315,7 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 /* maximum size of the flat tree (8K) */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 1567fcf..d28e0f3 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -339,7 +339,7 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 /* maximum size of the flat tree (8K) */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 44649d0..82ef4da 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -296,7 +296,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP /* maximum size of the flat tree (8K) */ -- cgit v1.1 From 02ba7022f62bb75908296c58c63866e1d294b69a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 16 Aug 2007 09:52:29 +0200 Subject: ppc4xx: Update Sequoia/Rainier bootstrap command As suggested by David Mitchell, here an update for the Sequoia/Rainier bootstrap command. Signed-off-by: Stefan Roese --- board/amcc/sequoia/cmd_sequoia.c | 205 ++++++++++++++++++++++++++++++--------- 1 file changed, 157 insertions(+), 48 deletions(-) diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c index 6fc60ea..f3803c0 100644 --- a/board/amcc/sequoia/cmd_sequoia.c +++ b/board/amcc/sequoia/cmd_sequoia.c @@ -26,76 +26,185 @@ #include #include -static u8 boot_533_nor[] = { - 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 -}; +/* + * There are 2 versions of production Sequoia & Rainier platforms. + * The primary difference is the reference clock. Those with + * 33333333 reference clocks will also have 667MHz rated + * processors. Not enough differences to have unique clock + * settings. + * + * NOR and NAND boot options change bytes 6, 7, 8, 9, 11. The + * values are independent of the rest of the clock settings. + * + * All Sequoias & Rainiers select from two possible EEPROMs in Boot + * Config F. One for 33MHz PCI, one for 66MHz PCI. The following + * values are for the 33MHz PCI configuration. Byte 5 (0 base) is + * the only value affected for a 66MHz PCI and simply needs a +0x10. + */ + +#define NAND_COMPATIBLE 0x01 +#define NOR_COMPATIBLE 0x02 + +/* check with Stefan on CFG_I2C_EEPROM_ADDR */ +#define I2C_EEPROM_ADDR 0x52 -static u8 boot_533_nand[] = { - 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xd0, 0x10, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 +static char *config_labels[] = { + "CPU: 333 PLB: 133 OPB: 66 EBC: 66", + "CPU: 333 PLB: 166 OPB: 83 EBC: 55", + "CPU: 400 PLB: 133 OPB: 66 EBC: 66", + "CPU: 400 PLB: 160 OPB: 80 EBC: 53", + "CPU: 416 PLB: 166 OPB: 83 EBC: 55", + "CPU: 500 PLB: 166 OPB: 83 EBC: 55", + "CPU: 533 PLB: 133 OPB: 66 EBC: 66", + "CPU: 667 PLB: 166 OPB: 83 EBC: 55", + NULL }; -static u8 boot_667_nor[] = { - 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 +static u8 boot_configs[][17] = { + { + (NOR_COMPATIBLE), + 0x84, 0x70, 0xa2, 0xa6, 0x05, 0x57, 0xa0, 0x10, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0xc7, 0x78, 0xf3, 0x4e, 0x05, 0xd7, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NOR_COMPATIBLE), + 0x86, 0x78, 0xc2, 0xc6, 0x05, 0x57, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NOR_COMPATIBLE), + 0x86, 0x78, 0xc2, 0xa6, 0x05, 0xd7, 0xa0, 0x10, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0xc6, 0x78, 0x52, 0xa6, 0x05, 0xd7, 0xa0, 0x10, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0xc7, 0x78, 0x52, 0xc6, 0x05, 0xd7, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NOR_COMPATIBLE), + 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + } }; -static u8 boot_667_nand[] = { - 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xd0, 0x10, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 +/* + * Bytes 6,8,9,11 change for NAND boot + */ +static u8 nand_boot[] = { + 0xd0, 0xa0, 0x68, 0x58 }; static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - u8 chip; - u8 *buf; - int cpu_freq; + u8 *buf, bNAND; + int x, y, nbytes, selcfg; + extern char console_buffer[]; - if (argc < 3) { + if (argc < 2) { printf("Usage:\n%s\n", cmdtp->usage); return 1; } - cpu_freq = simple_strtol(argv[1], NULL, 10); - if (!((cpu_freq == 533) || (cpu_freq == 667))) { - printf("Unsupported cpu-frequency - only 533 and 667 supported\n"); + if ((strcmp(argv[1], "nor") != 0) && + (strcmp(argv[1], "nand") != 0)) { + printf("Unsupported boot-device - only nor|nand support\n"); return 1; } - /* use 0x52 as I2C EEPROM address for now */ - chip = 0x52; + /* set the nand flag based on provided input */ + if ((strcmp(argv[1], "nand") == 0)) + bNAND = 1; + else + bNAND = 0; - if ((strcmp(argv[2], "nor") != 0) && - (strcmp(argv[2], "nand") != 0)) { - printf("Unsupported boot-device - only nor|nand support\n"); - return 1; - } + printf("Available configurations: \n\n"); - if (strcmp(argv[2], "nand") == 0) { - switch (cpu_freq) { - default: - case 533: - buf = boot_533_nand; - break; - case 667: - buf = boot_667_nand; - break; + if (bNAND) { + for(x = 0, y = 0; boot_configs[x][0] != 0; x++) { + /* filter on nand compatible */ + if (boot_configs[x][0] & NAND_COMPATIBLE) { + printf(" %d - %s\n", (y+1), config_labels[x]); + y++; + } } } else { - switch (cpu_freq) { - default: - case 533: - buf = boot_533_nor; - break; - case 667: - buf = boot_667_nor; - break; + for(x = 0, y = 0; boot_configs[x][0] != 0; x++) { + /* filter on nor compatible */ + if (boot_configs[x][0] & NOR_COMPATIBLE) { + printf(" %d - %s\n", (y+1), config_labels[x]); + y++; + } } } - if (i2c_write(chip, 0, 1, buf, 16) != 0) - printf("Error writing to EEPROM at address 0x%x\n", chip); + do { + nbytes = readline(" Selection [1-x / quit]: "); + + if (nbytes) { + if (strcmp(console_buffer, "quit") == 0) + return 0; + selcfg = simple_strtol(console_buffer, NULL, 10); + if ((selcfg < 1) || (selcfg > y)) + nbytes = 0; + } + } while (nbytes == 0); + + + y = (selcfg - 1); + + for (x = 0; boot_configs[x][0] != 0; x++) { + if (bNAND) { + if (boot_configs[x][0] & NAND_COMPATIBLE) { + if (y > 0) + y--; + else if (y < 1) + break; + } + } else { + if (boot_configs[x][0] & NOR_COMPATIBLE) { + if (y > 0) + y--; + else if (y < 1) + break; + } + } + } + + buf = &boot_configs[x][1]; + + if (bNAND) { + buf[6] = nand_boot[0]; + buf[8] = nand_boot[1]; + buf[9] = nand_boot[2]; + buf[11] = nand_boot[3]; + } + + /* check CPLD register +5 for PCI 66MHz flag */ + if (in8(CFG_BCSR_BASE + 5) & 0x01) + buf[5] += 0x10; + + if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0) + printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR); udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000); printf("Done\n"); @@ -105,7 +214,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( - bootstrap, 3, 0, do_bootstrap, + bootstrap, 2, 0, do_bootstrap, "bootstrap - program the I2C bootstrap EEPROM\n", - " - program the I2C bootstrap EEPROM\n" + " - strap to boot from NAND or NOR flash\n" ); -- cgit v1.1 From 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 16 Aug 2007 09:54:51 +0200 Subject: Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files Signed-off-by: Stefan Roese --- MAINTAINERS | 1 + MAKEALL | 1 + 2 files changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index f812431..bb329ad 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -296,6 +296,7 @@ Stefan Roese ocotea PPC440GX p3p440 PPC440GP pcs440ep PPC440EP + rainier PPC440GRx sequoia PPC440EPx sycamore PPC405GPr taishan PPC440GX diff --git a/MAKEALL b/MAKEALL index 1219fb3..ea37513 100755 --- a/MAKEALL +++ b/MAKEALL @@ -204,6 +204,7 @@ LIST_4xx=" \ PLU405 \ PMC405 \ PPChameleonEVB \ + rainier \ sbc405 \ sc3 \ sequoia \ -- cgit v1.1 From 9de469bd960cc1870bb40d6672ed42726b8b50d7 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 16 Aug 2007 10:18:33 +0200 Subject: ppc4xx: Only enable POST FPU test on Sequoia and not Rainier Signed-off-by: Stefan Roese --- include/configs/sequoia.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 3f75a44..824a812 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -343,6 +343,11 @@ #define CONFIG_CMD_USB #endif +#ifndef CONFIG_RAINIER +#define CFG_POST_FPU_ON CFG_POST_FPU +#else +#define CFG_POST_FPU_ON 0 +#endif /* POST support */ #define CONFIG_POST (CFG_POST_MEMORY | \ @@ -350,7 +355,7 @@ CFG_POST_UART | \ CFG_POST_I2C | \ CFG_POST_CACHE | \ - CFG_POST_FPU | \ + CFG_POST_FPU_ON | \ CFG_POST_ETHER | \ CFG_POST_SPR) -- cgit v1.1 From 2d78074d2e806edc380c1464eb9e5df335ece65e Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 22 Jun 2007 17:32:28 +0200 Subject: ppc7xx: Update CPCI750 board This small CPCI750 update extends the board specific command "show_config" to display the Marvell strapping registers and extends the PCI IDE controller. Signed-off-by: Reinhard Arlt Signed-off-by: Stefan Roese --- board/esd/cpci750/cpci750.c | 89 +++++++++++++++++++++++++++++++++++++++++++-- board/esd/cpci750/ide.c | 2 + 2 files changed, 87 insertions(+), 4 deletions(-) diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index 17e3568..298aa6a 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -55,6 +55,71 @@ #define DP(x) #endif +static char show_config_tab[][15] = {{"PCI0DLL_2 "}, /* 31 */ + {"PCI0DLL_1 "}, /* 30 */ + {"PCI0DLL_0 "}, /* 29 */ + {"PCI1DLL_2 "}, /* 28 */ + {"PCI1DLL_1 "}, /* 27 */ + {"PCI1DLL_0 "}, /* 26 */ + {"BbEP2En "}, /* 25 */ + {"SDRAMRdDataDel"}, /* 24 */ + {"SDRAMRdDel "}, /* 23 */ + {"SDRAMSync "}, /* 22 */ + {"SDRAMPipeSel_1"}, /* 21 */ + {"SDRAMPipeSel_0"}, /* 20 */ + {"SDRAMAddDel "}, /* 19 */ + {"SDRAMClkSel "}, /* 18 */ + {"Reserved(1!) "}, /* 17 */ + {"PCIRty "}, /* 16 */ + {"BootCSWidth_1 "}, /* 15 */ + {"BootCSWidth_0 "}, /* 14 */ + {"PCI1PadsCal "}, /* 13 */ + {"PCI0PadsCal "}, /* 12 */ + {"MultiMVId_1 "}, /* 11 */ + {"MultiMVId_0 "}, /* 10 */ + {"MultiGTEn "}, /* 09 */ + {"Int60xArb "}, /* 08 */ + {"CPUBusConfig_1"}, /* 07 */ + {"CPUBusConfig_0"}, /* 06 */ + {"DefIntSpc "}, /* 05 */ + {0 }, /* 04 */ + {"SROMAdd_1 "}, /* 03 */ + {"SROMAdd_0 "}, /* 02 */ + {"DRAMPadCal "}, /* 01 */ + {"SInitEn "}, /* 00 */ + {0 }, /* 31 */ + {0 }, /* 30 */ + {0 }, /* 29 */ + {0 }, /* 28 */ + {0 }, /* 27 */ + {0 }, /* 26 */ + {0 }, /* 25 */ + {0 }, /* 24 */ + {0 }, /* 23 */ + {0 }, /* 22 */ + {"JTAGCalBy "}, /* 21 */ + {"GB2Sel "}, /* 20 */ + {"GB1Sel "}, /* 19 */ + {"DRAMPLL_MDiv_5"}, /* 18 */ + {"DRAMPLL_MDiv_4"}, /* 17 */ + {"DRAMPLL_MDiv_3"}, /* 16 */ + {"DRAMPLL_MDiv_2"}, /* 15 */ + {"DRAMPLL_MDiv_1"}, /* 14 */ + {"DRAMPLL_MDiv_0"}, /* 13 */ + {"GB0Sel "}, /* 12 */ + {"DRAMPLLPU "}, /* 11 */ + {"DRAMPLL_HIKVCO"}, /* 10 */ + {"DRAMPLLNP "}, /* 09 */ + {"DRAMPLL_NDiv_7"}, /* 08 */ + {"DRAMPLL_NDiv_6"}, /* 07 */ + {"CPUPadCal "}, /* 06 */ + {"DRAMPLL_NDiv_5"}, /* 05 */ + {"DRAMPLL_NDiv_4"}, /* 04 */ + {"DRAMPLL_NDiv_3"}, /* 03 */ + {"DRAMPLL_NDiv_2"}, /* 02 */ + {"DRAMPLL_NDiv_1"}, /* 01 */ + {"DRAMPLL_NDiv_0"}}; /* 00 */ + extern void flush_data_cache (void); extern void invalidate_l1_instruction_cache (void); extern flash_info_t flash_info[]; @@ -901,21 +966,37 @@ void board_prebootm_init () dcache_disable (); } - -int do_show_cfg(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { unsigned int reset_sample_low; unsigned int reset_sample_high; + unsigned int l, l1, l2; GT_REG_READ(0x3c4, &reset_sample_low); GT_REG_READ(0x3d4, &reset_sample_high); printf("Reset configuration 0x%08x 0x%08x\n", reset_sample_low, reset_sample_high); + l2 = 0; + for (l=0; l<63; l++) { + if (show_config_tab[l][0] != 0) { + printf("%14s:%1x ", show_config_tab[l], + ((reset_sample_low >> (31 - (l & 0x1f)))) & 0x01); + l2++; + if ((l2 % 4) == 0) + printf("\n"); + } else { + l1++; + } + if (l == 32) + reset_sample_low = reset_sample_high; + } + printf("\n"); + return(0); } U_BOOT_CMD( - show_cfg, 1, 1, do_show_cfg, - "show_cfg- Show Marvell strapping register\n", + show_config, 1, 1, do_show_config, + "show_config - Show Marvell strapping register\n", "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" ); diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c index 01b90c6..0adafe2 100644 --- a/board/esd/cpci750/ide.c +++ b/board/esd/cpci750/ide.c @@ -43,6 +43,8 @@ int ide_preinit (void) ide_bus_offset[l] = -ATA_STATUS; } devbusfn = pci_find_device (0x1103, 0x0004, 0); + if (devbusfn == -1) + devbusfn = pci_find_device (0x1095, 0x3114, 0); if (devbusfn != -1) { status = 0; -- cgit v1.1 From 8fb6e80c06849e3013ac5c9350d8ed9e52967991 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 16 Aug 2007 11:21:49 +0200 Subject: ppc4xx: Remove #warning in esd auto_update.c Signed-off-by: Stefan Roese --- board/esd/common/auto_update.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index 62f6c20..c4a0957 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -24,10 +24,6 @@ #include -#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) -#warning CFG_NAND_LEGACY not defined in a file using the legacy NAND support! -#endif - #include #include #include -- cgit v1.1 From a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 16 Aug 2007 11:51:04 +0200 Subject: Minor Coding Style fix; Update CHANGELOG file. Signed-off-by: Wolfgang Denk --- CHANGELOG | 577 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ MAINTAINERS | 6 +- 2 files changed, 580 insertions(+), 3 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index a834568..da67d36 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,91 @@ +commit 2d78074d2e806edc380c1464eb9e5df335ece65e +Author: Stefan Roese +Date: Fri Jun 22 17:32:28 2007 +0200 + + ppc7xx: Update CPCI750 board + + This small CPCI750 update extends the board specific command + "show_config" to display the Marvell strapping registers and + extends the PCI IDE controller. + + Signed-off-by: Reinhard Arlt + Signed-off-by: Stefan Roese + +commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8 +Author: Jon Loeliger +Date: Wed Aug 15 11:55:35 2007 -0500 + + 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h + + Remove a leftover in net/tftp.c while we're at it. + + Signed-off-by: Jon Loeliger + +commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44 +Author: Jon Loeliger +Date: Wed Aug 15 12:20:40 2007 -0500 + + Move the MPC8641HPCN board under board/freescale. + + Minor path corrections needed to ensure buildability. + + Signed-off-by: Jon Loeliger + +commit 8662577fe36fdb6a44b55b998d9daac6392a736a +Author: Jon Loeliger +Date: Wed Aug 15 11:46:22 2007 -0500 + + 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h + + Remove a leftover in net/tftp.c while we're at it. + + Signed-off-by: Jon Loeliger + +commit 210f463c71917b7a4495c2103c228b9c179ae64d +Author: Jerry Van Baren +Date: Wed Aug 15 11:13:15 2007 -0400 + + Fix where the #ifdef CFG_BOOTMAPSZ is placed. + + Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb + interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT) + when it should have gone inside of the conditional. As a result, it + broke non-LIBFDT board builds. + + Also added a missing "not." to the comment. + + Signed-off-by: Gerald Van Baren + +commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7 +Author: Ed Swarthout +Date: Tue Aug 14 14:06:45 2007 -0500 + + Fix malloc size error in ahci_init_one. + + Typically this causes scsi init to corrupt the + devlist and break the coninfo command. + Fix a compiler size warning. + + Signed-off-by: Jason Jin + Signed-off-by: Ed Swarthout + Acked-by: Andy Fleming + +commit b361acd64fd2525c081b9b288b0804efe209c0e9 +Author: ksi@koi8.net +Date: Tue Aug 14 10:02:16 2007 -0700 + + TI DaVinci - fix unsupported %hhx format + + Signed-off-by: Sergey Kubushyn + +commit f01dbb5424a81453c81190dd30e945891466f621 +Author: Wolfgang Denk +Date: Tue Aug 14 18:42:36 2007 +0200 + + Coding style cleanup. Update CHANGELOG. + + Signed-off-by: Wolfgang Denk + commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 Author: Andy Fleming Date: Tue Aug 14 10:32:59 2007 -0500 @@ -20,6 +108,50 @@ Date: Tue Aug 14 15:40:00 2007 +0100 Supply spi interface in at45.c +commit 4ce846ec59f36b85d6644a769690ad3feb667575 +Author: Stefan Roese +Date: Tue Aug 14 15:12:01 2007 +0200 + + POST: Fix merge problem + + Signed-off-by: Stefan Roese + +commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c +Author: Stefan Roese +Date: Tue Aug 14 15:03:17 2007 +0200 + + Coding style cleanup + + Signed-off-by: Stefan Roese + +commit 779e975117a75e91fcebe226a63104dbfb924ab1 +Author: Stefan Roese +Date: Tue Aug 14 14:44:41 2007 +0200 + + ppc4xx: Add initial Zeus (PPC405EP) board support + + Signed-off-by: Stefan Roese + +commit c5a172a5fd636c12467429e3f7910e53773979c6 +Author: Stefan Roese +Date: Tue Aug 14 14:41:55 2007 +0200 + + POST: Add option for external ethernet loopback test + + When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST + is not done using an internal loopback connection, but by assuming + that an external loopback connector is plugged into the board. + + Signed-off-by: Stefan Roese + +commit eb2b4010ae426245172988804ee8d9193fb41038 +Author: Stefan Roese +Date: Tue Aug 14 14:39:44 2007 +0200 + + POST: Add ppc405 support to cache and UART POST + + Signed-off-by: Stefan Roese + commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c Author: Peter Pearse Date: Tue Aug 14 10:46:32 2007 +0100 @@ -391,6 +523,17 @@ Date: Wed Jun 27 13:34:26 2007 +0200 Signed-off-by: Haavard Skinnemoen Acked-by: Hans-Christian Egtvedt +commit 273db7e1bdd1937e32f1d4507321bb721ebd3118 +Author: Stefan Roese +Date: Mon Aug 13 09:05:33 2007 +0200 + + ppc4xx: Fix problem in PLL clock calculation + + This patch was originall provided by David Mitchell + and fixes a bug in the PLL clock calculation. + + Signed-off-by: Stefan Roese + commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b Author: Wolfgang Denk Date: Sun Aug 12 21:34:50 2007 +0200 @@ -849,6 +992,14 @@ Date: Thu Aug 2 14:42:20 2007 -0500 Signed-off-by: Ed Swarthout Signed-off-by: Jon Loeliger +commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42 +Author: Stefan Roese +Date: Fri Aug 10 10:42:25 2007 +0200 + + Coding style cleanup + + Signed-off-by: Stefan Roese + commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f Author: Dirk Behme Date: Thu Aug 2 17:42:08 2007 +0200 @@ -873,6 +1024,105 @@ Date: Thu Aug 2 17:41:14 2007 +0200 Signed-off-by: Dirk Behme +commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894 +Author: Niklaus Giger +Date: Fri Jul 27 11:31:22 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: HCU5 files + + Signed-off-by: Niklaus Giger + +commit 6e5de26c6e7580faf16e87745cd488b92b492d0c +Author: Niklaus Giger +Date: Fri Jul 27 11:30:33 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: HCU4 files + + Signed-off-by: Niklaus Giger + +commit e8397fc78c9394d71de233a4d810fbc9047e4c76 +Author: Niklaus Giger +Date: Fri Jul 27 11:38:26 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: common files + + Signed-off-by: Niklaus Giger + +commit ac982ea5a4f2f993efcf52dca122f5a59df047d8 +Author: Niklaus Giger +Date: Fri Jul 27 11:28:44 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: make related + + Signed-off-by: Niklaus Giger + +commit 137fdd9f474ecb853efdace5200576308c67f18d +Author: Niklaus Giger +Date: Fri Jul 27 11:28:03 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: HCU5 config + + Signed-off-by: Niklaus Giger + +commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2 +Author: Niklaus Giger +Date: Fri Jul 27 11:27:15 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: HCU4 config + + Signed-off-by: Niklaus Giger + +commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421 +Author: Niklaus Giger +Date: Fri Jul 27 11:25:31 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: READMEs + + Signed-off-by: Niklaus Giger + +commit 641cca9569ce351ddb287fd3343d8b1dcb591db4 +Author: Niklaus Giger +Date: Fri Jul 27 11:37:40 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: Infrastructure + + This series of patches adds support for 2 boards from Netstal Maschinen. + + The HCU4 has a PPC405Gpr and + the HCU5 has a PPC440EPX. + + The HCU4 has a somehow complicated flash setup, as the booteprom is + only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more + elegant solution. + + The HCU5 has only a booteprom as the whole code will be downloaded from a + different board which has HD, CD-ROM, etc and where all code is stored. + + This is my third try. I incorporated all suggestions made by Wolfgang and Stefan. + Thanks them a lot. + + Signed-off-by: Niklaus Giger + +commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171 +Author: Stefan Roese +Date: Fri Aug 10 08:42:55 2007 +0200 + + ppc4xx: Update lwmon5 POST configuration + + Signed-off-by: Stefan Roese + +commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4 +Author: Yuri Tikhonov +Date: Fri Aug 10 08:25:22 2007 +0200 + + POST: Add ppc4xx UART POST support without external uart clock (lwmon5) + + The patch adds support for UART POST on ppc44x-based boards with no + external serial clocks installed. + + Signed-off-by: Yuri Tikhonov + Acked-by: Stefan Roese + commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f Author: Kim Phillips Date: Mon Aug 6 18:18:34 2007 -0500 @@ -1169,6 +1419,17 @@ Date: Mon Aug 6 23:21:05 2007 +0200 Signed-off-by: Wolfgang Denk +commit 537223afa61f64480df31ce440a9cb386df4a814 +Author: Stefan Roese +Date: Mon Aug 6 21:10:17 2007 +0200 + + ppc4xx: Update AMCC Bamboo README doc/README.bamboo + + As suggested by Eugene O'Brien , + here an updated Bamboo README. + + Signed-off-by: Stefan Roese + commit 9c7e4b06214db61bb21f1bcbe57c97519669baae Author: Wolfgang Denk Date: Mon Aug 6 02:17:36 2007 +0200 @@ -1316,6 +1577,42 @@ Date: Thu Aug 2 10:11:18 2007 +0200 Minor cleanup of _nand build rules. +commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef +Author: Stefan Roese +Date: Thu Aug 2 08:33:56 2007 +0200 + + ppc4xx: Code cleanup + + Signed-off-by: Stefan Roese + +commit c92409812206ac67a7fa7aae298539a9c3804a46 +Author: Grzegorz Bernacki +Date: Tue Jul 31 18:51:48 2007 +0200 + + [ppc440SPe] Graceful recovery from machine check during PCIe configuration + + During config transactions on the PCIe bus an attempt to scan for a + non-existent device can lead to a machine check exception with certain + peripheral devices. In order to avoid crashing in such scenarios the + instrumented versions of the config cycle read routines are introduced, so + the exceptions fixups framework can gracefully recover. + + Signed-off-by: Grzegorz Bernacki + Acked-by: Rafal Jaworowski + +commit dec99558b9ea75a37940d07f41a3565a50b54ad1 +Author: Rafal Jaworowski +Date: Tue Jul 31 18:19:54 2007 +0200 + + [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A + + This brings back separate settings for PCIe bus numbers depending on chip + revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa + commit. 440SPe rev. A does NOT work properly with the same settings as for + the rev. B (no devices are seen on the bus during enumeration). + + Signed-off-by: Rafal Jaworowski + commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197 Author: Wolfgang Denk Date: Thu Aug 2 00:48:45 2007 +0200 @@ -1324,6 +1621,55 @@ Date: Thu Aug 2 00:48:45 2007 +0200 Signed-off-by: Wolfgang Denk +commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68 +Author: Eugene OBrien +Date: Tue Jul 31 10:24:56 2007 +0200 + + ppc4xx: Update AMCC Bamboo 440EP support + + Changed storage type of cfg_simulate_spd_eeprom to const + Changed storage type of gpio_tab to stack storage + (Cannot access global data declarations in .bss until afer code relocation) + + Improved SDRAM tests to catch problems where data is not uniquely addressable + (e.g. incorrectly programmed SDRAM row or columns) + + Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules + Fixed AM29LV320DT (OpCode Flash) sector map + + Signed-off-by: Eugene OBrien + Signed-off-by: Stefan Roese + +commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574 +Author: Stefan Roese +Date: Tue Jul 31 08:37:01 2007 +0200 + + ppc4xx: Update 440EPx lwmon5 board support + + - Clear ECC status regs after ECC POST test + - Set dcbz for ECC generation with caches enabled as default + - Code cleanup + + Signed-off-by: Stefan Roese + +commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724 +Author: Stefan Roese +Date: Mon Jul 30 11:04:57 2007 +0200 + + ppc4xx: Only print ECC related info when the error bis are set + + Signed-off-by: Stefan Roese + +commit e36220a4baf1f188ba60f17e9d0f043069b1362a +Author: Matthias Fuchs +Date: Fri Jul 27 16:44:31 2007 +0200 + + new FPGA image for PLU405 board + + new FPGA image for PLU405 board with improved CompactFlash timing + + Signed-off-by: Matthias Fuchs + commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6 Author: Rafal Jaworowski Date: Fri Jul 27 14:43:59 2007 +0200 @@ -1351,6 +1697,73 @@ Date: Fri Jul 27 14:22:04 2007 +0200 Signed-off-by: Rafal Jaworowski +commit d4024bb72dd81695ec099b2199eda0d27c623e62 +Author: John Otken +Date: Thu Jul 26 17:49:11 2007 +0200 + + ppc4xx: Add support for AMCC 405EP Taihu board + + Signed-off-by: John Otken + +commit b66091de6c7390620312c2501db23d8391e7cabb +Author: Anatolij Gustschin +Date: Thu Jul 26 15:08:01 2007 +0200 + + ppc4xx: lwmon5: Update Lime initialization + + Change Lime SDRAM initialization to now support 100MHz and + 133MHz (if enabled). Also the framebuffer is initialized to + display a blue rectangle with a white border. + + Signed-off-by: Anatolij Gustschin + Signed-off-by: Stefan Roese + +commit 9f24a808f17fc0f37b7fb4805f734741335caecc +Author: Stefan Roese +Date: Tue Jul 24 09:52:52 2007 +0200 + + ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added + + The used Intel NOR FLASH chips have internally two dies, and are now + treated as two seperate chips. + + Signed-off-by: Stefan Roese + +commit aedf5bde179ecfbd0a96130d18996a96518b785f +Author: Stefan Roese +Date: Tue Jul 24 07:20:09 2007 +0200 + + ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...) + + As suggested by Hakan Eryigit, here an updated setup for the lwmon5 + interrupt controller. + + Signed-off-by: Stefan Roese + +commit a71d96eac8130b53a91f93cd10c70fca0db18d52 +Author: Stefan Roese +Date: Fri Jul 20 15:03:44 2007 +0200 + + ppc4xx: Fix bug with default GPIO output value + + As spotted by Matthias Fuchs, the default output values for all GPIO1 + outputs were not setup correctly. This patch fixes this issue. + + Signed-off-by: Stefan Roese + +commit 531e3e8b831f357056448fa573137d5fb37000fd +Author: Pavel Kolesnikov +Date: Fri Jul 20 15:03:03 2007 +0200 + + POST: Add ECC POST for the lwmon5 board + + This patch adds ECC Post test for the Lwmon5 board based + on PPC440EPx to U-Boot. + + Signed-off-by: Pavel Kolesnikov + Acked-by: Yuri Tikhonov + Acked-by: Stefan Roese + commit cc3023b9f95d7ac959a764471a65001062aecf41 Author: Rafal Jaworowski Date: Thu Jul 19 17:12:28 2007 +0200 @@ -1362,6 +1775,58 @@ Date: Thu Jul 19 17:12:28 2007 +0200 Signed-off-by: Rafal Jaworowski +commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf +Author: Stefan Roese +Date: Mon Jul 16 10:02:12 2007 +0200 + + ppc4xx: Code cleanup + + Signed-off-by: Stefan Roese + +commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8 +Author: Stefan Roese +Date: Mon Jul 16 10:01:38 2007 +0200 + + ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup + + Signed-off-by: Stefan Roese + +commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9 +Author: Stefan Roese +Date: Mon Jul 16 10:00:43 2007 +0200 + + ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c + + The new boardspecific DDR2 controller configuration is used for the Yucca + board. Now the Yucca board with 440SPe Rev. A chips is also supported. + + Signed-off-by: Stefan Roese + +commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e +Author: Stefan Roese +Date: Mon Jul 16 09:57:00 2007 +0200 + + ppc4xx: Add new weak functions to support boardspecific DDR2 configuration + + The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better + support non default, boardspecific DDR(2) controller configuration. + + Signed-off-by: Stefan Roese + +commit 5743a9207a370b90f09b20ebd61167c806b937f3 +Author: Stefan Roese +Date: Mon Jul 16 08:53:51 2007 +0200 + + ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup + + The new function remove_tlb() can be used to remove the TLB's used to + map a specific memory region. This is especially useful for the DDR(2) + setup routines which configure the SDRAM area temporarily as a cached + area (for speedup on auto-calibration and ECC generation) and later + need this area uncached for normal usage. + + Signed-off-by: Stefan Roese + commit 3a6cab844cf74f76639d795e0be8717e02c86af7 Author: Wolfgang Denk Date: Sat Jul 14 22:51:02 2007 +0200 @@ -1393,6 +1858,17 @@ Date: Fri Jul 13 08:26:05 2007 +0200 Signed-off-by: Heiko Schocher +commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578 +Author: Stefan Roese +Date: Thu Jul 12 16:32:08 2007 +0200 + + ppc4xx: Change receive buffer handling in the 4xx emac driver + + This change fixes a bug in the receive buffer handling, that + could lead to problems upon high network traffic (broadcasts...). + + Signed-off-by: Stefan Roese + commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360 Author: Wolfgang Denk Date: Thu Jul 12 01:45:34 2007 +0200 @@ -1975,6 +2451,50 @@ Date: Tue Jul 10 00:01:28 2007 +0200 Signed-off-by: Wolfgang Denk +commit c8603cfbd4573379a6076c9c208545ba2bbf019a +Author: Stefan Roese +Date: Mon Jul 9 11:00:24 2007 +0200 + + Small coding style cleanup + + Signed-off-by: Stefan Roese + +commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc +Author: Matthias Fuchs +Date: Mon Jul 9 10:10:08 2007 +0200 + + Migrate esd 405EP boards to new NAND subsystem + + Remove unused CFG_NAND_LEGACY define + + These boards to not have NAND. + + Signed-off-by: Matthias Fuchs + +commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803 +Author: Matthias Fuchs +Date: Mon Jul 9 10:10:06 2007 +0200 + + Migrate esd 405EP boards to new NAND subsystem + + Migrate esd 405EP boards to new NAND subsystem + + -cleanup + -use correct io accessors (in/out_be32()) + + Signed-off-by: Matthias Fuchs + +commit e09f7ab5749c345f924da272bea0521a73af5b11 +Author: Matthias Fuchs +Date: Mon Jul 9 10:10:04 2007 +0200 + + Migrate esd 405EP boards to new NAND subsystem + + This patch prepares the migration from the legacy NAND driver + to U-Boot's new NAND subsystem for esd boards. + + Signed-off-by: Matthias Fuchs + commit c3517f919d0f61650cf3027fd4faf0f631142f6c Author: Jon Loeliger Date: Sun Jul 8 18:10:08 2007 -0500 @@ -2162,6 +2682,41 @@ Date: Thu Jul 5 19:13:52 2007 -0500 Signed-off-by: Jon Loeliger +commit 10e038932f22ee80ebd53de312531e70e6590a2f +Author: Thomas Knobloch +Date: Fri Jul 6 14:58:39 2007 +0200 + + [NAND] Bad block skipping for command nboot + + The old implementation of command nboot does not support reading the image from + NAND flash with skipping of bad blocks. The patch implements a new version of + the nboot command: by calling nboot.jffs2 from the u-boot command line the + command will load the image from NAND flash with respect to bad blocks (by using + nand_read_opts()). This is similar to e.g. the NAND read command: "nand + read.jffs2 ...". + + Signed-off-by: Thomas Knobloch + Signed-off-by: Stefan Roese + +commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f +Author: Stefan Roese +Date: Fri Jul 6 12:26:51 2007 +0200 + + ppc4xx: Update lwmon5 default environment + + Signed-off-by: Stefan Roese + +commit 5d187430a055d62f17ca84d75e7245439d1f7e75 +Author: Stefan Roese +Date: Fri Jul 6 11:48:24 2007 +0200 + + ppc4xx: Update lwmon5 board + + Add unlock=yes environment variable to default variables to unlock + the CFI flash by default. + + Signed-off-by: Stefan Roese + commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e Author: Stefan Roese Date: Fri Jul 6 09:45:47 2007 +0200 @@ -3151,6 +3706,18 @@ Date: Fri Jun 22 14:58:04 2007 +0200 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros - minor 4xx cleanup +commit d677b32855f577ae2690dcd64a172cdd706e0ffc +Author: Mike Frysinger +Date: Fri Jun 22 10:34:12 2007 +0200 + + [patch] add nand_init() prototype to nand.h + + since nand_init() is expected to be called by other parts of u-boot, there + should be a prototype for it in nand.h + + Signed-off-by: Mike Frysinger + Signed-off-by: Stefan Roese + commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b Author: Wolfgang Denk Date: Wed Jun 20 18:14:24 2007 +0200 @@ -3767,6 +4334,16 @@ Date: Sun May 27 16:51:48 2007 +0200 Signed-off-by: Marian Balakowicz Acked-by: Bartlomiej Sieka +commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b +Author: Ulf Samuelsson +Date: Thu May 24 12:12:47 2007 +0200 + + [PATCH][NAND] Define the Vendor Id for Micron NAND Flash + + Signed-off-by: Ulf Samuelsson + Signed-off-by: Ladislav Michl + Signed-off-by: Stefan Roese + commit d756894722c888d09a9fa1df8323753772d3dcce Author: Stefan Roese Date: Thu May 24 09:49:00 2007 +0200 diff --git a/MAINTAINERS b/MAINTAINERS index f812431..d5249e5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -158,12 +158,12 @@ Matthias Fuchs VOH405 PPC405EP VOM405 PPC405EP WUH405 PPC405EP - CMS700 PPC405EP + CMS700 PPC405EP Niklaus Giger - HCU4 PPC405GPr - HCU5 PPC440EPx + HCU4 PPC405GPr + HCU5 PPC440EPx Frank Gottschling -- cgit v1.1 From 002275a3ed8b114885f6702d6d544d0780dfe689 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Aug 2007 08:54:10 +0200 Subject: Bios emulator - fix microblaze toolchain problem microblaze CPU have problem with bios_emulator code. Microblaze toolchain doesn't support PRAGMA PACK. Signed-off-by: Michal Simek --- drivers/bios_emulator/besys.c | 5 ++++- drivers/bios_emulator/bios.c | 5 ++++- drivers/bios_emulator/biosemu.c | 4 +++- drivers/bios_emulator/x86emu/debug.c | 4 +++- drivers/bios_emulator/x86emu/decode.c | 5 +++-- drivers/bios_emulator/x86emu/ops.c | 4 +++- drivers/bios_emulator/x86emu/ops2.c | 4 +++- drivers/bios_emulator/x86emu/prim_ops.c | 5 ++++- drivers/bios_emulator/x86emu/sys.c | 4 +++- 9 files changed, 30 insertions(+), 10 deletions(-) diff --git a/drivers/bios_emulator/besys.c b/drivers/bios_emulator/besys.c index 4c4bc8d..8f1d8b2 100644 --- a/drivers/bios_emulator/besys.c +++ b/drivers/bios_emulator/besys.c @@ -47,9 +47,12 @@ * ****************************************************************************/ -#include "biosemui.h" +#include #if defined(CONFIG_BIOSEMU) + +#include "biosemui.h" + /*------------------------- Global Variables ------------------------------*/ #ifndef __i386__ diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c index 7aa1bfb2e..70e9ce1 100644 --- a/drivers/bios_emulator/bios.c +++ b/drivers/bios_emulator/bios.c @@ -41,9 +41,12 @@ * ****************************************************************************/ -#include "biosemui.h" +#include #if defined(CONFIG_BIOSEMU) + +#include "biosemui.h" + /*----------------------------- Implementation ----------------------------*/ /**************************************************************************** diff --git a/drivers/bios_emulator/biosemu.c b/drivers/bios_emulator/biosemu.c index 4c3aedf..ccfc872 100644 --- a/drivers/bios_emulator/biosemu.c +++ b/drivers/bios_emulator/biosemu.c @@ -45,11 +45,13 @@ * ****************************************************************************/ -#include "biosemui.h" #include +#include #if defined(CONFIG_BIOSEMU) +#include "biosemui.h" + BE_sysEnv _BE_env = {{0}}; static X86EMU_memFuncs _BE_mem __attribute__((section(".got2"))) = { BE_rdb, diff --git a/drivers/bios_emulator/x86emu/debug.c b/drivers/bios_emulator/x86emu/debug.c index 915739c..5cbcc95 100644 --- a/drivers/bios_emulator/x86emu/debug.c +++ b/drivers/bios_emulator/x86emu/debug.c @@ -37,11 +37,13 @@ * ****************************************************************************/ -#include "x86emu/x86emui.h" #include +#include #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*----------------------------- Implementation ----------------------------*/ #ifdef DEBUG diff --git a/drivers/bios_emulator/x86emu/decode.c b/drivers/bios_emulator/x86emu/decode.c index 879f0a0..7a9a1dd 100644 --- a/drivers/bios_emulator/x86emu/decode.c +++ b/drivers/bios_emulator/x86emu/decode.c @@ -36,11 +36,12 @@ * instruction decoding and accessess of immediate data via IP. etc. * ****************************************************************************/ - -#include "x86emu/x86emui.h" +#include #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*----------------------------- Implementation ----------------------------*/ /**************************************************************************** diff --git a/drivers/bios_emulator/x86emu/ops.c b/drivers/bios_emulator/x86emu/ops.c index d334fb5..a77bd9b 100644 --- a/drivers/bios_emulator/x86emu/ops.c +++ b/drivers/bios_emulator/x86emu/ops.c @@ -75,10 +75,12 @@ * ****************************************************************************/ -#include "x86emu/x86emui.h" +#include #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*----------------------------- Implementation ----------------------------*/ /* constant arrays to do several instructions in just one function */ diff --git a/drivers/bios_emulator/x86emu/ops2.c b/drivers/bios_emulator/x86emu/ops2.c index 81c0d49..d6a210c 100644 --- a/drivers/bios_emulator/x86emu/ops2.c +++ b/drivers/bios_emulator/x86emu/ops2.c @@ -44,10 +44,12 @@ * ****************************************************************************/ -#include "x86emu/x86emui.h" +#include #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*----------------------------- Implementation ----------------------------*/ /**************************************************************************** diff --git a/drivers/bios_emulator/x86emu/prim_ops.c b/drivers/bios_emulator/x86emu/prim_ops.c index c1152ea..2a254a4 100644 --- a/drivers/bios_emulator/x86emu/prim_ops.c +++ b/drivers/bios_emulator/x86emu/prim_ops.c @@ -97,11 +97,14 @@ * ****************************************************************************/ +#include + #define PRIM_OPS_NO_REDEFINE_ASM -#include "x86emu/x86emui.h" #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*------------------------- Global Variables ------------------------------*/ static u32 x86emu_parity_tab[8] = diff --git a/drivers/bios_emulator/x86emu/sys.c b/drivers/bios_emulator/x86emu/sys.c index 566389f..dd44ff1 100644 --- a/drivers/bios_emulator/x86emu/sys.c +++ b/drivers/bios_emulator/x86emu/sys.c @@ -39,10 +39,12 @@ * ****************************************************************************/ -#include "x86emu/x86emui.h" +#include #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*------------------------- Global Variables ------------------------------*/ X86EMU_sysEnv _X86EMU_env; /* Global emulator machine state */ -- cgit v1.1 From 78f9fef7f406078c8bf7191e665a73f795157746 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 15 Aug 2007 15:46:46 -0500 Subject: mpc885ads: Don't define CONFIG_BZIP2. bzip2 requires a significant chunk of malloc space, and there isn't enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area and a downloaded image at 0x400000. Signed-off-by: Scott Wood --- board/fads/fads.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/board/fads/fads.h b/board/fads/fads.h index c6f7ccd..a7fe2e9 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -71,7 +71,10 @@ #undef CONFIG_BOOTARGS #undef CONFIG_WATCHDOG /* watchdog disabled */ + +#if !defined(CONFIG_MPC885ADS) #define CONFIG_BZIP2 /* include support for bzip2 compressed images */ +#endif /* * New MPC86xADS and MPC885ADS provide two Ethernet connectivity options: -- cgit v1.1 From 10aaf716cb0dc6614df54ef78bed5144afd23ef8 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 15 Aug 2007 17:30:56 -0500 Subject: Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed" neglected to *also* put the code inside the similar #ifdef for CONFIG_OF_FLAT_TREE. Signed-off-by: Andy Fleming --- common/cmd_bootm.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index df1d038..90e3f8b 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -987,6 +987,15 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, #endif #endif /* CONFIG_OF_LIBFDT */ #if defined(CONFIG_OF_FLAT_TREE) +#ifdef CFG_BOOTMAPSZ + /* + * The blob must be within CFG_BOOTMAPSZ, + * so we flag it to be copied if it is not. + */ + if (of_flat_tree >= (char *)CFG_BOOTMAPSZ) + of_data = of_flat_tree; +#endif + /* move of_flat_tree if needed */ if (of_data) { ulong of_start, of_len; -- cgit v1.1 From ec7238229507e7f47533a611ea8c53319d234cf3 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 15 Aug 2007 20:03:13 -0500 Subject: Add support for building all boards with a TSEC Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards. Now we can do a MAKEALL test on all of them! Signed-off-by: Andy Fleming --- MAKEALL | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/MAKEALL b/MAKEALL index 1219fb3..9f47f5f 100755 --- a/MAKEALL +++ b/MAKEALL @@ -358,6 +358,12 @@ LIST_74xx=" \ ZUMA \ " +LIST_TSEC=" \ + ${LIST_85xx} \ + ${LIST_86xx} \ + ${LIST_83xx} \ +" + LIST_7xx=" \ BAB7xx \ CPCI750 \ @@ -672,7 +678,7 @@ do mips|mips_el| \ nios|nios2| \ ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \ - x86|I486) + x86|I486|TSEC) for target in `eval echo '$LIST_'${arg}` do build_target ${target} -- cgit v1.1 From 3a79013e2adda53332dfd0b511066a805e929a9d Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 15 Aug 2007 20:03:25 -0500 Subject: Define tsec flag values in config files The tsec_info structure and array has a "flags" field for each ethernet controller. This field is the only reason there are settings. Switch to defining TSECn_FLAGS for each controller in the config header, and we can greatly simplify the array, and also simplify the addition of future boards. Signed-off-by: Andy Fleming --- drivers/tsec.c | 30 +++++++++++------------------- include/configs/MPC8313ERDB.h | 2 ++ include/configs/MPC8349EMDS.h | 2 ++ include/configs/MPC8349ITX.h | 2 ++ include/configs/MPC8540ADS.h | 3 +++ include/configs/MPC8540EVAL.h | 4 ++++ include/configs/MPC8541CDS.h | 5 ++--- include/configs/MPC8544DS.h | 8 +++----- include/configs/MPC8548CDS.h | 4 ++++ include/configs/MPC8555CDS.h | 5 ++--- include/configs/MPC8560ADS.h | 3 ++- include/configs/MPC8568MDS.h | 6 +++--- include/configs/MPC8641HPCN.h | 4 ++++ include/configs/PM854.h | 3 +++ include/configs/PM856.h | 3 ++- include/configs/TQM834x.h | 2 ++ include/configs/TQM85xx.h | 3 +++ include/configs/sbc8349.h | 2 ++ include/configs/sbc8641d.h | 4 ++++ include/configs/stxgp3.h | 3 ++- include/configs/stxssa.h | 3 ++- 21 files changed, 64 insertions(+), 37 deletions(-) diff --git a/drivers/tsec.c b/drivers/tsec.c index fd21ed4..1df8f7d 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -65,38 +65,30 @@ struct tsec_info_struct { * FEC_PHYIDX */ static struct tsec_info_struct tsec_info[] = { -#if defined(CONFIG_TSEC1) -#if defined(CONFIG_MPC8544DS) || defined(CONFIG_MPC8641HPCN) - {TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX}, -#else - {TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX}, -#endif +#ifdef CONFIG_TSEC1 + {TSEC1_PHY_ADDR, TSEC1_FLAGS, TSEC1_PHYIDX}, #else {0, 0, 0}, #endif -#if defined(CONFIG_TSEC2) -#if defined(CONFIG_MPC8641HPCN) - {TSEC2_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC2_PHYIDX}, -#else - {TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX}, -#endif +#ifdef CONFIG_TSEC2 + {TSEC2_PHY_ADDR, TSEC2_FLAGS, TSEC2_PHYIDX}, #else {0, 0, 0}, #endif #ifdef CONFIG_MPC85XX_FEC - {FEC_PHY_ADDR, 0, FEC_PHYIDX}, + {FEC_PHY_ADDR, FEC_FLAGS, FEC_PHYIDX}, #else -#if defined(CONFIG_TSEC3) - {TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX}, +#ifdef CONFIG_TSEC3 + {TSEC3_PHY_ADDR, TSEC3_FLAGS, TSEC3_PHYIDX}, #else {0, 0, 0}, #endif -#if defined(CONFIG_TSEC4) - {TSEC4_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC4_PHYIDX}, +#ifdef CONFIG_TSEC4 + {TSEC4_PHY_ADDR, TSEC4_FLAGS, TSEC4_PHYIDX}, #else {0, 0, 0}, -#endif -#endif +#endif /* CONFIG_TSEC4 */ +#endif /* CONFIG_MPC85XX_FEC */ }; #define MAXCONTROLLERS (4) diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 81db96f..f92dce5 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -310,6 +310,8 @@ #define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0x1c #define TSEC2_PHY_ADDR 4 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 1567fcf..10af5f0 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -440,6 +440,8 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 44649d0..58ee13d 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -382,6 +382,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ #define TSEC1_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT #endif #ifdef CONFIG_TSEC2 @@ -391,6 +392,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ #define TSEC2_PHY_ADDR 4 #define TSEC2_PHYIDX 0 +#define TSEC2_FLAGS TSEC_GIGABIT #endif #define CONFIG_ETHPRIME "Freescale TSEC" diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 5a7c879..b774992 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -374,6 +374,8 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #if CONFIG_HAS_FEC @@ -381,6 +383,7 @@ #define CONFIG_MPC85XX_FEC_NAME "FEC" #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 #endif /* Options are: TSEC[0-1], FEC */ diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 0ce25cf..5c03ac8 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -224,6 +224,10 @@ #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 #define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define FEC_FLAGS 0 + /* Options are: TSEC[0-1], FEC */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 232f171..33a153e 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -384,13 +384,12 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 -#define FEC_PHY_ADDR 3 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -#define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 32934e1..7863447 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -364,15 +364,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_TSEC1_NAME "eTSEC1" #define CONFIG_TSEC3 1 #define CONFIG_TSEC3_NAME "eTSEC3" -#undef CONFIG_MPC85XX_FEC - -#define CONFIG_TSEC_TBI 1 /* enable internal TBI phy */ -#define CONFIG_SGMII_RISER -#define TSEC1_SGMII_PHY_ADDR_OFFSET 0x1c /* sgmii phy base */ #define TSEC1_PHY_ADDR 0 #define TSEC3_PHY_ADDR 1 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + #define TSEC1_PHYIDX 0 #define TSEC3_PHYIDX 0 diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index cda9fd5..7345a3e 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -447,6 +447,10 @@ extern unsigned long get_clock_freq(void); #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) /* Options are: eTSEC[0-3] */ #define CONFIG_ETHPRIME "eTSEC0" diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index e8fe99a..48a2663 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -384,13 +384,12 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 -#define FEC_PHY_ADDR 3 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -#define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index c10e551..da41dad 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -360,11 +360,12 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index dc9cb1f..6b824ed 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -399,9 +399,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "eTSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "eTSEC1" -#undef CONFIG_TSEC3 -#undef CONFIG_TSEC4 -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 3 @@ -409,6 +406,9 @@ extern unsigned long get_clock_freq(void); #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + /* Options are: eTSEC[0-3] */ #define CONFIG_ETHPRIME "eTSEC0" diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 64dcbd0..e912331 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -417,6 +417,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) #define CONFIG_ETHPRIME "eTSEC1" diff --git a/include/configs/PM854.h b/include/configs/PM854.h index dbf9422..93090b9 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -270,11 +270,14 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_MPC85XX_FEC 1 #define CONFIG_MPC85XX_FEC_NAME "FEC" #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 6bdfa5d..6105747 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -262,11 +262,12 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #endif /* CONFIG_TSEC_ENET */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 661712b..91c1694 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -253,6 +253,8 @@ extern int tqm834x_num_flash_banks; #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index d5ce3ba..cb9bf54 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -266,8 +266,11 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 #define CONFIG_HAS_ETH1 #define CONFIG_HAS_ETH2 diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 1831bef..aa515ea 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -410,6 +410,8 @@ #define TSEC2_PHY_ADDR 0x1a #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 277b611..760b754 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -380,6 +380,10 @@ #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC3_FLAGS TSEC_GIGABIT +#define TSEC4_FLAGS TSEC_GIGABIT #define CFG_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */ diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 1f41cf7..43b185b 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -234,12 +234,13 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 55e2c8d..3dae27a 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -260,12 +260,13 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#define CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ -- cgit v1.1 From b96c83d4ae475a70ef2635cd0e748174c44c8601 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 15 Aug 2007 20:03:34 -0500 Subject: Fix numerous bugs in the 8568 UEC support Actually, fixed a large bug in the UEC for *all* platforms. How did this ever work? uec_init() did not follow the spec for eth_init(), and returned 0 on success. Switch it to return the link like tsec_init() (and 0 on error) The immap for the 8568 was defined based on MPC8568, rather than CONFIG_MPC8568 CONFIG_QE was off CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0" Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is enabled Signed-off-by: Andy Fleming --- drivers/qe/uec.c | 6 +++--- include/asm-ppc/immap_85xx.h | 2 +- include/configs/MPC8568MDS.h | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index 89a7279..dc2765b 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -1110,7 +1110,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd) if (dev->enetaddr[0] & 0x01) { printf("%s: MacAddress is multcast address\n", __FUNCTION__); - return -EINVAL; + return 0; } uec_set_mac_address(uec, dev->enetaddr); uec->the_first_run = 1; @@ -1119,10 +1119,10 @@ static int uec_init(struct eth_device* dev, bd_t *bd) err = uec_open(uec, COMM_DIR_RX_AND_TX); if (err) { printf("%s: cannot enable UEC device\n", dev->name); - return err; + return 0; } - return 0; + return uec->mii_info->link; } static void uec_halt(struct eth_device* dev) diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 3d4816f..496fc72 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1596,7 +1596,7 @@ typedef struct ccsr_gur { uint svr; /* 0xe00a4 - System version register */ char res10a[8]; uint rstcr; /* 0xe00b0 - Reset control register */ -#ifdef MPC8568 +#ifdef CONFIG_MPC8568 char res10b[76]; par_io_t qe_par_io[7]; /* 0xe0100 - 0xe01bf */ char res10c[3136]; diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 6b824ed..80ccda5 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -35,7 +35,7 @@ #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_QE /* Enable QE */ +#define CONFIG_QE /* Enable QE */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ @@ -348,7 +348,7 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_UEC_ETH #ifndef CONFIG_TSEC_ENET -#define CONFIG_ETHPRIME "Freescale GETH" +#define CONFIG_ETHPRIME "FSL UEC0" #endif #define CONFIG_PHY_MODE_NEED_CHANGE #define CONFIG_eTSEC_MDIO_BUS @@ -409,7 +409,7 @@ extern unsigned long get_clock_freq(void); #define TSEC1_FLAGS TSEC_GIGABIT #define TSEC2_FLAGS TSEC_GIGABIT -/* Options are: eTSEC[0-3] */ +/* Options are: eTSEC[0-1] */ #define CONFIG_ETHPRIME "eTSEC0" #endif /* CONFIG_TSEC_ENET */ -- cgit v1.1 From 7613afda77d5eec0f47d303025b0c661b70e4c73 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 15 Aug 2007 20:03:44 -0500 Subject: Don't wait for disconnected TSECs The TSEC driver's PHY code waits a long time for autonegotiation to complete, even if the link is down. The PHY knows the link is down or up before autonegotiation completes, so we can short-circuit the process if the link is down. Signed-off-by: Andy Fleming --- drivers/tsec.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/tsec.c b/drivers/tsec.c index 1df8f7d..6bca4dc 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -347,17 +347,16 @@ uint mii_cr_init(uint mii_reg, struct tsec_private * priv) uint mii_parse_sr(uint mii_reg, struct tsec_private * priv) { /* - * Wait if PHY is capable of autonegotiation and autonegotiation - * is not complete. + * Wait if the link is up, and autonegotiation is in progress + * (ie - we're capable and it's not done) */ mii_reg = read_phy_reg(priv, MIIM_STATUS); - if ((mii_reg & PHY_BMSR_AUTN_ABLE) + if ((mii_reg & MIIM_STATUS_LINK) && (mii_reg & PHY_BMSR_AUTN_ABLE) && !(mii_reg & PHY_BMSR_AUTN_COMP)) { int i = 0; puts("Waiting for PHY auto negotiation to complete"); - while (!((mii_reg & PHY_BMSR_AUTN_COMP) - && (mii_reg & MIIM_STATUS_LINK))) { + while (!(mii_reg & PHY_BMSR_AUTN_COMP)) { /* * Timeout reached ? */ @@ -377,7 +376,10 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private * priv) priv->link = 1; udelay(500000); /* another 500 ms (results in faster booting) */ } else { - priv->link = 1; + if (mii_reg & MIIM_STATUS_LINK) + priv->link = 1; + else + priv->link = 0; } return 0; @@ -517,16 +519,13 @@ uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv) mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS); - if (!((mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE) && - (mii_reg & MIIM_88E1011_PHYSTAT_LINK))) { + if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) && + !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { int i = 0; puts("Waiting for PHY realtime link"); - while (!((mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE) && - (mii_reg & MIIM_88E1011_PHYSTAT_LINK))) { - /* - * Timeout reached ? - */ + while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { + /* Timeout reached ? */ if (i > PHY_AUTONEGOTIATE_TIMEOUT) { puts(" TIMEOUT !\n"); priv->link = 0; @@ -541,6 +540,11 @@ uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv) } puts(" done\n"); udelay(500000); /* another 500 ms (results in faster booting) */ + } else { + if (mii_reg & MIIM_88E1011_PHYSTAT_LINK) + priv->link = 1; + else + priv->link = 0; } if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX) -- cgit v1.1 From 82bd9ee77490588d4da785d75829ca63d0176baf Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 15 Aug 2007 20:06:50 -0500 Subject: Fix warnings from of_data copy fix Forgot to cast of_flat_tree to ulong. Signed-off-by: Andy Fleming --- common/cmd_bootm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 90e3f8b..bcb927f 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -932,7 +932,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, * so we flag it to be copied if it is not. */ if (of_flat_tree >= (char *)CFG_BOOTMAPSZ) - of_data = of_flat_tree; + of_data = (ulong)of_flat_tree; #endif /* move of_flat_tree if needed */ @@ -993,7 +993,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, * so we flag it to be copied if it is not. */ if (of_flat_tree >= (char *)CFG_BOOTMAPSZ) - of_data = of_flat_tree; + of_data = (ulong)of_flat_tree; #endif /* move of_flat_tree if needed */ -- cgit v1.1 From d35b508a55508535b6e8445b718585d27df733d3 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 15 Aug 2007 22:29:56 -0500 Subject: fdt: suppress unused variable 'bd' warning Signed-off-by: Kim Phillips --- common/fdt_support.c | 1 - 1 file changed, 1 deletion(-) diff --git a/common/fdt_support.c b/common/fdt_support.c index caaa682..175d59e 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -46,7 +46,6 @@ struct fdt_header *fdt; int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force) { - bd_t *bd = gd->bd; int nodeoffset; int err; u32 tmp; /* used to set 32 bit integer properties */ -- cgit v1.1 From 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Thu, 16 Aug 2007 15:16:02 +0200 Subject: PPC4xx:HCU4/5 cleanup ecc/sdram init Make ecc initialisation robust, as DDR2-ECC errors may be generated while zeroing the RAM. Return 16 bytes (a cacheline) less than the available memory, as the board and/or PPC440EPx might have problems accessing the last bytes. Signed-off-by: Niklaus Giger --- board/netstal/hcu5/sdram.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 4039195..5d457f7 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -36,7 +36,7 @@ #include #include -void sysLedSet(u32 value); +void hcu_led_set(u32 value); void dcbz_area(u32 start_address, u32 num_bytes); void dflush(void); @@ -138,7 +138,7 @@ static int wait_for_dlllock(void) void sdram_panic(const char *reason) { printf("\n%s: reason %s", __FUNCTION__, reason); - sysLedSet(0xff); + hcu_led_set(0xff); while (1) { } /* Never return */ @@ -197,6 +197,13 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes, mfsdram(DDR0_00, val); mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); + /* + * Clear possible errors + * If not done, then we could get an interrupt later on when + * exceptions are enabled. + */ + mtspr(mcsr, mfspr(mcsr)); + /* Set 'int_mask' parameter to functionnal value */ mfsdram(DDR0_01, val); mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | @@ -244,7 +251,6 @@ long int initdram (int board_type) sdram_panic(INVALID_HW_CONFIG); break; } - dram_size -= 16 * 1024 * 1024; mtsdram(DDR0_07, 0x00090100); /* * TCPD=200 cycles of clock input is required to lock the DLL. @@ -283,6 +289,7 @@ long int initdram (int board_type) /* * Program tlb entries for this size (dynamic) */ + remove_tlb(CFG_SDRAM_BASE, 256 << 20); program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE); /* @@ -291,6 +298,8 @@ long int initdram (int board_type) */ program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0); + /* Diminish RAM to initialize */ + dram_size = dram_size - 32 ; #ifdef CONFIG_DDR_ECC /* * If ECC is enabled, initialize the parity bits. -- cgit v1.1 From 07bc20560cb9d3d186cca268c05c82762e8c55ad Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Thu, 16 Aug 2007 15:16:03 +0200 Subject: PPC4xx:HCU4/5 cleanup Minor cleanups to confirm to the u-boot coding style. Some german expressions -> english. HCU5 enforces a unique IP adress for a given slot in the rack. Signed-off-by: Niklaus Giger --- board/netstal/hcu4/hcu4.c | 20 +++++++------- board/netstal/hcu5/hcu5.c | 69 +++++++++++++++++++++++++++++++++-------------- 2 files changed, 60 insertions(+), 29 deletions(-) diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index 2b95604..48a3f13 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -43,7 +43,7 @@ enum { HW_GENERATION_MCU25 = 0x09, }; -void sysLedSet(u32 value); +void hcu_led_set(u32 value); long int spd_sdram(int(read_spd)(uint addr)); #ifdef CONFIG_SPD_EEPROM @@ -121,22 +121,24 @@ int checkboard (void) printf ("HCU3: index %d\n\n", index); else if (generation == HW_GENERATION_HCU4) printf ("HCU4: index %d\n\n", index); - /* GPIO here noch nicht richtig initialisert !!! */ - sysLedSet(0); + hcu_led_set(0); for (j = 0; j < 7; j++) { - sysLedSet(1 << j); + hcu_led_set(1 << j); udelay(50 * 1000); } return 0; } -u32 sysLedGet(void) +u32 hcu_led_get(void) { return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff; } -void sysLedSet(u32 value /* value to place in LEDs */) +/*---------------------------------------------------------------------------+ + * hcu_led_set value to be placed into the LEDs (max 6 bit) + *---------------------------------------------------------------------------*/ +void hcu_led_set(u32 value) { u32 tmp = ~value; u32 *ledReg; @@ -243,9 +245,9 @@ long int fixed_hcu4_sdram (int board_type) } /*---------------------------------------------------------------------------+ - * getSerialNr + * hcu_serial_number *---------------------------------------------------------------------------*/ -static u32 getSerialNr(void) +static u32 hcu_serial_number(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; @@ -265,7 +267,7 @@ int misc_init_r(void) char *s = getenv("ethaddr"); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = hcu_serial_number(); for (i = 0; i < 6; ++i) { gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 23df081..b9b10fd 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -22,10 +22,11 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; -void sysLedSet(u32 value); +void hcu_led_set(u32 value); extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; @@ -41,7 +42,8 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define SDR0_ECID2 0x0082 #define SDR0_ECID3 0x0083 -#define SYS_IO_ADDRESS 0xcce00000 +#define SYS_IO_ADDRESS (CFG_CS_2 + 0x00e00000) +#define SYS_SLOT_ADDRESS (CFG_CPLD + 0x00400000) #define DEFAULT_ETH_ADDR "ethaddr" /* ethaddr for first or etha1ddr for second ethernet */ @@ -182,11 +184,14 @@ int board_early_init_f(void) return 0; } +#ifdef CONFIG_BOARD_PRE_INIT int board_pre_init(void) { return board_early_init_f(); } +#endif + int checkboard(void) { unsigned int j; @@ -211,38 +216,51 @@ int checkboard(void) printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3); for (j = 0;j < 6; j++) { - sysLedSet(1 << j); + hcu_led_set(1 << j); udelay(200 * 1000); } return 0; } -u32 sysLedGet(void) +u32 hcu_led_get(void) { return in16(SYS_IO_ADDRESS) & 0x3f; } -void sysLedSet(u32 value /* value to place in LEDs */) +/*---------------------------------------------------------------------------+ + * hcu_led_set value to be placed into the LEDs (max 6 bit) + *---------------------------------------------------------------------------*/ +void hcu_led_set(u32 value) { out16(SYS_IO_ADDRESS, value); } /*---------------------------------------------------------------------------+ - * getSerialNr + * get_serial_number *---------------------------------------------------------------------------*/ -static u32 getSerialNr(void) +static u32 get_serial_number(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; if (*serial == 0xffffffff) - return get_ticks(); + return 0; return *serial; } /*---------------------------------------------------------------------------+ + * hcu_get_slot + *---------------------------------------------------------------------------*/ +u32 hcu_get_slot(void) +{ + u16 *slot = (u16 *)SYS_SLOT_ADDRESS; + return (*slot) & 0x7f; +} + + +/*---------------------------------------------------------------------------+ * misc_init_r. *---------------------------------------------------------------------------*/ int misc_init_r(void) @@ -250,7 +268,7 @@ int misc_init_r(void) char *s = getenv(DEFAULT_ETH_ADDR); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = get_serial_number(); unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; @@ -272,8 +290,7 @@ int misc_init_r(void) gd->bd->bi_enetaddr[2] = 0x13; gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff; gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff; - /* byte[5].bit 0 must be zero */ - gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xfe; + gd->bd->bi_enetaddr[5] = hcu_get_slot(); sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0", gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1], gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3], @@ -283,6 +300,25 @@ int misc_init_r(void) setenv(DEFAULT_ETH_ADDR, ethaddr); } + /* IP-Adress update */ + { + IPaddr_t ipaddr; + char *ipstring; + + ipstring = getenv("ipaddr"); + if (ipstring == 0) + ipaddr = string_to_ip("172.25.1.99"); + else + ipaddr = string_to_ip(ipstring); + if ((ipaddr & 0xff) != (32 + hcu_get_slot())) { + char tmp[22]; + + ipaddr = (ipaddr & 0xffffff00) + 32 + hcu_get_slot(); + ip_to_string (ipaddr, tmp); + printf("%s: enforce %s\n", __FUNCTION__, tmp); + setenv("ipaddr", tmp); + } + } #ifdef CFG_ENV_IS_IN_FLASH /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, @@ -346,6 +382,7 @@ int misc_init_r(void) return 0; } +#if defined(CONFIG_PCI) /************************************************************************* * pci_pre_init * @@ -358,7 +395,6 @@ int misc_init_r(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; @@ -411,7 +447,6 @@ int pci_pre_init(struct pci_controller *hose) return 1; } -#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init @@ -421,7 +456,6 @@ int pci_pre_init(struct pci_controller *hose) * may not be sufficient for a given board. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { /*-------------------------------------------------------------+ @@ -478,13 +512,11 @@ void pci_target_init(struct pci_controller *hose) pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ /************************************************************************* * pci_master_init * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { unsigned short temp_short; @@ -499,8 +531,6 @@ void pci_master_init(struct pci_controller *hose) temp_short | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); } -#endif -/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ /************************************************************************* * is_pci_host @@ -517,9 +547,8 @@ void pci_master_init(struct pci_controller *hose) * * ************************************************************************/ -#if defined(CONFIG_PCI) int is_pci_host(struct pci_controller *hose) { return 1; } -#endif /* defined(CONFIG_PCI) */ +#endif /* defined(CONFIG_PCI) */ -- cgit v1.1 From ea5877e31ed63ade948fd1293895ec23fe01472e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 16 Aug 2007 11:01:21 -0500 Subject: Fix up some fdt issues on 8544DS It looks like we had a merge issue that duplicated a bit of code in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get the MAC address properly set in the device tree on boot for TSEC1 Signed-off-by: Kumar Gala --- board/freescale/mpc8544ds/mpc8544ds.c | 7 ------- include/configs/MPC8544DS.h | 1 + 2 files changed, 1 insertion(+), 7 deletions(-) diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 8ddbb01..80822be 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -540,12 +540,5 @@ ft_board_setup(void *blob, bd_t *bd) debug("PCI@b000 first_busno=%d last_busno=%d\n",p[0],p[1]); } #endif - ft_cpu_setup(blob, bd); - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } } #endif diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 7863447..fcb92fa 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -472,6 +472,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD -- cgit v1.1 From d64ee908a1b525e5bb2b4cbeb5c449ad6a469666 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 16 Aug 2007 15:05:04 -0500 Subject: Update MPC8544 DS PCI memory map The PCIe bus that the ULI M1575 is connected to has no possible way of needing more than the fixed amount of IO & Memory space needed by the ULI. So make it use far less IO & memory space and have it use the shared LAW. This free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed by each bus. Signed-off-by: Kumar Gala --- board/freescale/mpc8544ds/init.S | 13 ++++++------- include/configs/MPC8544DS.h | 21 +++++++++------------ 2 files changed, 15 insertions(+), 19 deletions(-) diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S index ea7d54d..900c368 100644 --- a/board/freescale/mpc8544ds/init.S +++ b/board/freescale/mpc8544ds/init.S @@ -218,7 +218,7 @@ law_entry: .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M) .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_64K) .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M) @@ -226,18 +226,17 @@ law_entry: .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M) - /* To keep to 10 LAWs, PCIE1_IO_PHYS must use top of mem region */ + .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_64K) .long (CFG_PCIE2_MEM_PHYS>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_512M) .long (CFG_PCIE2_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_64K) + /* contains both PCIE3 MEM & IO space */ .long (CFG_PCIE3_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_256M) - - .long (CFG_PCIE3_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_2M) 4: entry_end diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index fcb92fa..746f360 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -282,7 +282,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe1000000 -#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCI1_IO_SIZE 0x00010000 /* 64k */ /* PCI view of System Memory */ #define CFG_PCI_MEMORY_BUS 0x00000000 @@ -294,26 +294,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_PCIE2_MEM_PHYS CFG_PCIE2_MEM_BASE #define CFG_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCIE2_IO_BASE 0x00000000 -#define CFG_PCIE2_IO_PHYS 0xe2000000 -#define CFG_PCIE2_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE2_IO_PHYS 0xe1010000 +#define CFG_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 1, Slot 2,tgtid 2, Base address a000 */ #define CFG_PCIE1_MEM_BASE 0xa0000000 #define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE -#define CFG_PCIE1_MEM_SIZE 0x08000000 /* 128M */ -#define CFG_PCIE1_MEM_BASE2 0xa8000000 -#define CFG_PCIE1_MEM_PHYS2 CFG_PCIE1_MEM_BASE2 -#define CFG_PCIE1_MEM_SIZE2 0x04000000 /* 64M */ -#define CFG_PCIE1_IO_BASE 0x00000000 /* reuse mem LAW */ -#define CFG_PCIE1_IO_PHYS 0xaf000000 -#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCIE1_IO_BASE 0x00000000 +#define CFG_PCIE1_IO_PHYS 0xe1020000 +#define CFG_PCIE1_IO_SIZE 0x00010000 /* 64k */ /* controller 3, direct to uli, tgtid 3, Base address b000 */ #define CFG_PCIE3_MEM_BASE 0xb0000000 #define CFG_PCIE3_MEM_PHYS CFG_PCIE3_MEM_BASE -#define CFG_PCIE3_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCIE3_MEM_SIZE 0x00100000 /* 1M */ #define CFG_PCIE3_IO_BASE 0x00000000 -#define CFG_PCIE3_IO_PHYS 0xe3000000 +#define CFG_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ #define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */ #if defined(CONFIG_PCI) -- cgit v1.1 From 10327dc5541f947c0cf7e31fef86c4706169607a Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Thu, 16 Aug 2007 16:35:02 -0500 Subject: Add CONFIG_HAS_ETH0 to all boards with TSEC The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether to update TSEC1's device-tree node, so we need to add it to all the boards with TSECs. Do this for 83xx and 86xx, too, since they will eventually do something similar. Signed-off-by: Andy Fleming --- include/configs/MPC8313ERDB.h | 1 + include/configs/MPC8349EMDS.h | 1 + include/configs/MPC8349ITX.h | 1 + include/configs/MPC8540ADS.h | 1 + include/configs/MPC8540EVAL.h | 3 +++ include/configs/MPC8541CDS.h | 1 + include/configs/MPC8548CDS.h | 1 + include/configs/MPC8555CDS.h | 1 + include/configs/MPC8560ADS.h | 1 + include/configs/MPC8641HPCN.h | 1 + include/configs/PM854.h | 1 + include/configs/PM856.h | 1 + include/configs/TQM834x.h | 1 + include/configs/TQM85xx.h | 1 + include/configs/sbc8349.h | 1 + include/configs/sbc8641d.h | 1 + include/configs/stxgp3.h | 1 + include/configs/stxssa.h | 1 + 18 files changed, 20 insertions(+) diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index f92dce5..3775037 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -509,6 +509,7 @@ #define CONFIG_ETHADDR 00:E0:0C:00:95:01 #define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH0 #define CONFIG_ETH1ADDR 00:E0:0C:00:95:02 #define CONFIG_IPADDR 10.0.0.2 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 10af5f0..48616c0 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -701,6 +701,7 @@ #if defined(CONFIG_TSEC_ENET) #define CONFIG_ETHADDR 00:04:9f:ef:23:33 #define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH0 #define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21 #endif diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 58ee13d..c5d0362 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -378,6 +378,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_TSEC1 #ifdef CONFIG_TSEC1 +#define CONFIG_HAS_ETH0 #define CONFIG_TSEC1_NAME "TSEC0" #define CFG_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index b774992..22de2fb 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -492,6 +492,7 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 5c03ac8..e376c11 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -213,10 +213,13 @@ #define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_TSEC1 1 +#define CONFIG_HAS_ETH0 #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 +#define CONFIG_HAS_ETH1 #define CONFIG_TSEC2_NAME "TSEC1" #define CONFIG_MPC85XX_FEC 1 +#define CONFIG_HAS_ETH2 #define CONFIG_MPC85XX_FEC_NAME "FEC" #define TSEC1_PHY_ADDR 7 #define TSEC2_PHY_ADDR 4 diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 33a153e..a4727b2 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -481,6 +481,7 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 7345a3e..58a8ea5 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -542,6 +542,7 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 48a2663..8d7d657 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -481,6 +481,7 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index da41dad..b3c33d9 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -522,6 +522,7 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index e912331..03e815d 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -608,6 +608,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif +#define CONFIG_HAS_ETH0 1 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 #define CONFIG_HAS_ETH3 1 diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 93090b9..a6a1e73 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -282,6 +282,7 @@ /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 6105747..9a17e3d 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -392,6 +392,7 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:40:42:01:00:00 #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:40:42:01:00:01 diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 91c1694..0147252 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -501,6 +501,7 @@ extern int tqm834x_num_flash_banks; */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR D2:DA:5E:44:BC:29 #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 1E:F3:40:21:92:53 diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index cb9bf54..a330c42 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -271,6 +271,7 @@ #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 #define FEC_FLAGS 0 +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 #define CONFIG_HAS_ETH2 diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index aa515ea..37a8f87 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -662,6 +662,7 @@ #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:a0:1e:a0:13:8d #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:a0:1e:a0:13:8e diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 760b754..3525ab4 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -546,6 +546,7 @@ #define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD #endif +#define CONFIG_HAS_ETH0 1 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 #define CONFIG_HAS_ETH3 1 diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 43b185b..c5ae0cd 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -379,6 +379,7 @@ /*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:e0:0c:07:9b:8a #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 3dae27a..f32ff67 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -407,6 +407,7 @@ /*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:e0:0c:07:9b:8a #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b -- cgit v1.1 From ab77bc547ba561c25ea34457ed17aa0b2f7c2723 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 15:39:17 -0500 Subject: ColdFire: MCF5329 Update and cleanup Signed-off-by: TsiChungLiew --- Makefile | 2 +- board/freescale/m5329evb/mii.c | 8 ++--- board/freescale/m5329evb/nand.c | 2 +- common/cmd_bdinfo.c | 12 +++---- drivers/net/mcffec.c | 10 +++--- include/asm-m68k/immap.h | 2 ++ include/asm-m68k/io.h | 62 ++++++++++++++++++------------------ include/asm-m68k/timer.h | 14 +++++++++ include/configs/M5329EVB.h | 69 +++++++++++++++++++---------------------- lib_m68k/board.c | 2 +- lib_m68k/time.c | 3 +- rtc/mcfrtc.c | 4 +-- 12 files changed, 100 insertions(+), 90 deletions(-) diff --git a/Makefile b/Makefile index 2bb11b6..79ab40b 100644 --- a/Makefile +++ b/Makefile @@ -1682,7 +1682,7 @@ M5329BFEE_config : unconfig esac; \ >include/config.h ; \ if [ "$${NAND}" != "0" ] ; then \ - echo "#define NANDFLASH_SIZE $${NAND}" >> include/config.h ; \ + echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ fi @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c index 68dc04f..31f1510 100644 --- a/board/freescale/m5329evb/mii.c +++ b/board/freescale/m5329evb/mii.c @@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) #undef MII_DEBUG #undef ET_DEBUG @@ -50,7 +50,7 @@ int fecpin_setclear(struct eth_device *dev, int setclear) return 0; } -#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) #include /* Make MII read/write commands for the FEC. */ @@ -134,7 +134,7 @@ uint mii_send(uint mii_cmd) return (mii_reply & 0xffff); /* data read from phy */ } -#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */ +#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ #if defined(CFG_DISCOVER_PHY) int mii_discover_phy(struct eth_device *dev) @@ -303,4 +303,4 @@ int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, return 0; } -#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c index 2272a24..fefb42e 100644 --- a/board/freescale/m5329evb/nand.c +++ b/board/freescale/m5329evb/nand.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) #include #include diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 58ee9f3..889cff8 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -225,7 +225,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #if defined(CFG_MBAR) print_num ("mbar", bd->bi_mbar_base ); #endif -#if defined(CFG_CMD_NET) +#if defined(CONFIG_CMD_NET) puts ("ethaddr ="); for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); @@ -239,22 +239,22 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif #if defined(CONFIG_HAS_ETH2) - puts ("\neth2addr ="); - for (i=0; i<6; ++i) { + puts ("\neth2addr ="); + for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enet2addr[i]); } #endif #if defined(CONFIG_HAS_ETH3) - puts ("\neth3addr ="); - for (i=0; i<6; ++i) { + puts ("\neth3addr ="); + for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enet3addr[i]); } #endif puts ("\nip_addr = "); print_IPaddr (bd->bi_ip_addr); -#endif /* CFG_CMD_NET */ +#endif /* CONFIG_CMD_NET */ printf ("\nbaudrate = %d bps\n", bd->bi_baudrate); return 0; diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index fde1aae..68a0ee6 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -51,7 +51,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) struct fec_info_s fec_info[] = { #ifdef CFG_FEC0_IOBASE @@ -410,7 +410,7 @@ int fec_init(struct eth_device *dev, bd_t * bd) fec_reset(dev); -#if (CONFIG_COMMANDS & CFG_CMD_MII) || defined (CONFIG_MII) || \ +#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \ defined (CFG_DISCOVER_PHY) mii_init(); @@ -420,7 +420,7 @@ int fec_init(struct eth_device *dev, bd_t * bd) #ifndef CFG_DISCOVER_PHY setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED); #endif /* ifndef CFG_DISCOVER_PHY */ -#endif /* CFG_CMD_MII || CONFIG_MII */ +#endif /* CONFIG_CMD_MII || CONFIG_MII */ /* We use strictly polling mode only */ fecp->eimr = 0; @@ -568,7 +568,7 @@ int mcffec_initialize(bd_t * bis) eth_register(dev); -#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register(dev->name, mcffec_miiphy_read, mcffec_miiphy_write); #endif @@ -580,5 +580,5 @@ int mcffec_initialize(bd_t * bis) return 1; } -#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ #endif /* CONFIG_MCFFEC */ diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 7c267af..2555e7e 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -38,8 +38,10 @@ #ifdef CONFIG_MCFTMR #define CFG_UDELAY_BASE (MMAP_DTMR0) #define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprh0) #define CFG_TMRINTR_NO (INT0_HI_DTMR1) #define CFG_TMRINTR_MASK (INTC_IPRH_INT33) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) #define CFG_TMRINTR_PRI (6) #define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) #endif diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index 114efb1..e14a581 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -28,18 +28,18 @@ #include -#define readb(addr) in_8((volatile u8 *)(addr)) -#define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) +#define readb(addr) in_8((volatile u8 *)(addr)) +#define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) #if !defined(__BIG_ENDIAN) -#define readw(addr) (*(volatile u16 *) (addr)) -#define readl(addr) (*(volatile u32 *) (addr)) -#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b)) -#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b)) +#define readw(addr) (*(volatile u16 *) (addr)) +#define readl(addr) (*(volatile u32 *) (addr)) +#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b)) +#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b)) #else -#define readw(addr) in_le16((volatile u16 *)(addr)) -#define readl(addr) in_le32((volatile u32 *)(addr)) -#define writew(b,addr) out_le16((volatile u16 *)(addr),(b)) -#define writel(b,addr) out_le32((volatile u32 *)(addr),(b)) +#define readw(addr) in_le16((volatile u16 *)(addr)) +#define readl(addr) in_le32((volatile u32 *)(addr)) +#define writew(b,addr) out_le16((volatile u16 *)(addr),(b)) +#define writel(b,addr) out_le32((volatile u32 *)(addr),(b)) #endif /* @@ -48,25 +48,25 @@ * are arrays of bytes, and byte-swapping is not appropriate in * that case. - paulus */ -#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns)) -#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns)) -#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) -#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) - -#define inb(port) in_8((u8 *)((port)+_IO_BASE)) -#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val)) +#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns)) +#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns)) +#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) + +#define inb(port) in_8((u8 *)((port)+_IO_BASE)) +#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val)) #if !defined(__BIG_ENDIAN) -#define inw(port) in_be16((u16 *)((port)+_IO_BASE)) -#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val)) -#define inl(port) in_be32((u32 *)((port)+_IO_BASE)) -#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val)) +#define inw(port) in_be16((u16 *)((port)+_IO_BASE)) +#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val)) +#define inl(port) in_be32((u32 *)((port)+_IO_BASE)) +#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val)) #else -#define inw(port) in_le16((u16 *)((port)+_IO_BASE)) -#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val)) -#define inl(port) in_le32((u32 *)((port)+_IO_BASE)) -#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val)) +#define inw(port) in_le16((u16 *)((port)+_IO_BASE)) +#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val)) +#define inl(port) in_le32((u32 *)((port)+_IO_BASE)) +#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val)) #endif extern inline void _insb(volatile u8 * port, void *buf, int ns) @@ -151,10 +151,10 @@ extern inline void _outsl_ns(volatile u32 * port, const void *buf, int nl) * Neither do the standard versions now, these are just here * for older code. */ -#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) -#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) #define IO_SPACE_LIMIT ~0 diff --git a/include/asm-m68k/timer.h b/include/asm-m68k/timer.h index d8f4e2a..3ec710d 100644 --- a/include/asm-m68k/timer.h +++ b/include/asm-m68k/timer.h @@ -33,12 +33,26 @@ /****************************************************************************/ /* DMA Timer module registers */ typedef struct dtimer_ctrl { +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) u16 tmr; /* 0x00 Mode register */ + u16 res1; /* 0x02 */ + u16 trr; /* 0x04 Reference register */ + u16 res2; /* 0x06 */ + u16 tcr; /* 0x08 Capture register */ + u16 res3; /* 0x0A */ + u16 tcn; /* 0x0C Counter register */ + u16 res4; /* 0x0E */ + u8 res6; /* 0x10 */ + u8 ter; /* 0x11 Event register */ + u16 res7; /* 0x12 */ +#else + u16 tmr; /* 0x00 Mode register */ u8 txmr; /* 0x02 Extended Mode register */ u8 ter; /* 0x03 Event register */ u32 trr; /* 0x04 Reference register */ u32 tcr; /* 0x08 Capture register */ u32 tcn; /* 0x0C Counter register */ +#endif } dtmr_t; /*Programmable Interrupt Timer */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 6a7e052..d3b1605 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -47,25 +47,23 @@ #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ -#define DEFAULT_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_FLASH | \ - CFG_CMD_I2C | \ - (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO \ - ) +/* Command line configuration */ +#include + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO #ifdef NANDFLASH_SIZE -# define CONFIG_COMMANDS (DEFAULT_COMMANDS | CFG_CMD_NAND) -#else -# define CONFIG_COMMANDS (DEFAULT_COMMANDS) +# define CONFIG_CMD_NAND #endif #define CFG_UNIFY_CACHE @@ -108,9 +106,9 @@ #define CFG_I2C_OFFSET 0x58000 #define CFG_IMMR CFG_MBAR -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_UDP_CHECKSUM + #ifdef CONFIG_MCFFEC # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 @@ -137,7 +135,7 @@ #define CFG_PROMPT "-> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#ifdef CONFIG_CMD_KGDB # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -154,7 +152,7 @@ #define CFG_MBAR 0xFC000000 -#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) +#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) /* * Low Level Configuration Settings @@ -168,7 +166,7 @@ #define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ #define CFG_INIT_RAM_CTRL 0x221 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -198,7 +196,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization @@ -214,20 +212,19 @@ #endif #ifdef NANDFLASH_SIZE -# define CFG_MAX_NAND_DEVICE 1 -# define CFG_NAND_BASE (CFG_CS2_BASE << 16) -# define CFG_NAND_SIZE 1 -# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } -# define NAND_MAX_CHIPS 1 -# define NAND_ALLOW_ERASE_ALL 1 -# define CONFIG_JFFS2_NAND 1 -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) -# define CONFIG_JFFS2_PART_OFFSET 0x00000000 +# define CFG_MAX_NAND_DEVICE 1 +# define CFG_NAND_BASE (CFG_CS2_BASE << 16) +# define CFG_NAND_SIZE 1 +# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +# define NAND_MAX_CHIPS 1 +# define NAND_ALLOW_ERASE_ALL 1 +# define CONFIG_JFFS2_NAND 1 +# define CONFIG_JFFS2_DEV "nand0" +# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) +# define CONFIG_JFFS2_PART_OFFSET 0x00000000 #endif -#define CFG_FLASH_BASE 0 -#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_FLASH_BASE (CFG_CS0_BASE << 16) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -267,6 +264,4 @@ #define CFG_CS2_CTRL 0x00001f60 #endif -#define CONFIG_UDP_CHECKSUM - #endif /* _M5329EVB_H */ diff --git a/lib_m68k/board.c b/lib_m68k/board.c index 395018c..778ec78 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -692,7 +692,7 @@ void board_init_r (gd_t *id, ulong dest_addr) #endif #if defined(CONFIG_NET_MULTI) puts ("Net: "); - eth_initialize (bd); + eth_initialize (bd); #endif #endif diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 3dbce07..6c19059 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -347,10 +347,9 @@ void udelay(unsigned long usec) void dtimer_interrupt(void *not_used) { volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE); - volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); /* check for timer interrupt asserted */ - if ((intp->iprh0 & CFG_TMRINTR_MASK) == CFG_TMRINTR_MASK) { + if ((CFG_TMRPND_REG & CFG_TMRINTR_MASK) == CFG_TMRINTR_PEND) { timerp->ter = (DTIM_DTER_CAP | DTIM_DTER_REF); timestamp++; return; diff --git a/rtc/mcfrtc.c b/rtc/mcfrtc.c index 0be5874..76bb510 100644 --- a/rtc/mcfrtc.c +++ b/rtc/mcfrtc.c @@ -28,7 +28,7 @@ #include #include -#if defined(CONFIG_MCFRTC) && (CONFIG_COMMANDS & CFG_CMD_DATE) +#if defined(CONFIG_MCFRTC) && defined(CONFIG_CMD_DATE) #undef RTC_DEBUG @@ -118,4 +118,4 @@ void rtc_reset(void) rtc->cr |= RTC_CR_SWR; } -#endif /* CONFIG_MCFRTC && CFG_CMD_DATE */ +#endif /* CONFIG_MCFRTC && CONFIG_CMD_DATE */ -- cgit v1.1 From 7171977fb8fd77cfb6676953fa9a05789c450513 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 15:40:20 -0500 Subject: ColdFire: MCF5329 header file clean up Signed-off-by: TsiChungLiew --- include/asm-m68k/m5329.h | 2795 ++++++++++++++++++++-------------------------- 1 file changed, 1215 insertions(+), 1580 deletions(-) diff --git a/include/asm-m68k/m5329.h b/include/asm-m68k/m5329.h index 15bb121..cd69fb0 100644 --- a/include/asm-m68k/m5329.h +++ b/include/asm-m68k/m5329.h @@ -31,1993 +31,1628 @@ * System Control Module (SCM) *********************************************************************/ /* Bit definitions and macros for SCM_MPR */ -#define SCM_MPR_MPROT0(x) (((x)&0x0F)<<28) -#define SCM_MPR_MPROT1(x) (((x)&0x0F)<<24) -#define SCM_MPR_MPROT2(x) (((x)&0x0F)<<20) -#define SCM_MPR_MPROT4(x) (((x)&0x0F)<<12) -#define SCM_MPR_MPROT5(x) (((x)&0x0F)<<8) -#define SCM_MPR_MPROT6(x) (((x)&0x0F)<<4) -#define MPROT_MTR 4 -#define MPROT_MTW 2 -#define MPROT_MPL 1 +#define SCM_MPR_MPROT0(x) (((x)&0x0F)<<28) +#define SCM_MPR_MPROT1(x) (((x)&0x0F)<<24) +#define SCM_MPR_MPROT2(x) (((x)&0x0F)<<20) +#define SCM_MPR_MPROT4(x) (((x)&0x0F)<<12) +#define SCM_MPR_MPROT5(x) (((x)&0x0F)<<8) +#define SCM_MPR_MPROT6(x) (((x)&0x0F)<<4) +#define MPROT_MTR 4 +#define MPROT_MTW 2 +#define MPROT_MPL 1 /* Bit definitions and macros for SCM_BMT */ -#define BMT_BME (0x08) -#define BMT_8 (0x07) -#define BMT_16 (0x06) -#define BMT_32 (0x05) -#define BMT_64 (0x04) -#define BMT_128 (0x03) -#define BMT_256 (0x02) -#define BMT_512 (0x01) -#define BMT_1024 (0x00) +#define BMT_BME (0x08) +#define BMT_8 (0x07) +#define BMT_16 (0x06) +#define BMT_32 (0x05) +#define BMT_64 (0x04) +#define BMT_128 (0x03) +#define BMT_256 (0x02) +#define BMT_512 (0x01) +#define BMT_1024 (0x00) /* Bit definitions and macros for SCM_PACRA */ -#define SCM_PACRA_PACR0(x) (((x)&0x0F)<<28) -#define SCM_PACRA_PACR1(x) (((x)&0x0F)<<24) -#define SCM_PACRA_PACR2(x) (((x)&0x0F)<<20) -#define PACR_SP 4 -#define PACR_WP 2 -#define PACR_TP 1 +#define SCM_PACRA_PACR0(x) (((x)&0x0F)<<28) +#define SCM_PACRA_PACR1(x) (((x)&0x0F)<<24) +#define SCM_PACRA_PACR2(x) (((x)&0x0F)<<20) +#define PACR_SP 4 +#define PACR_WP 2 +#define PACR_TP 1 /* Bit definitions and macros for SCM_PACRB */ -#define SCM_PACRB_PACR8(x) (((x)&0x0F)<<28) -#define SCM_PACRB_PACR12(x) (((x)&0x0F)<<12) +#define SCM_PACRB_PACR8(x) (((x)&0x0F)<<28) +#define SCM_PACRB_PACR12(x) (((x)&0x0F)<<12) /* Bit definitions and macros for SCM_PACRC */ -#define SCM_PACRC_PACR16(x) (((x)&0x0F)<<28) -#define SCM_PACRC_PACR17(x) (((x)&0x0F)<<24) -#define SCM_PACRC_PACR18(x) (((x)&0x0F)<<20) -#define SCM_PACRC_PACR19(x) (((x)&0x0F)<<16) -#define SCM_PACRC_PACR21(x) (((x)&0x0F)<<8) -#define SCM_PACRC_PACR22(x) (((x)&0x0F)<<4) -#define SCM_PACRC_PACR23(x) (((x)&0x0F)<<0) +#define SCM_PACRC_PACR16(x) (((x)&0x0F)<<28) +#define SCM_PACRC_PACR17(x) (((x)&0x0F)<<24) +#define SCM_PACRC_PACR18(x) (((x)&0x0F)<<20) +#define SCM_PACRC_PACR19(x) (((x)&0x0F)<<16) +#define SCM_PACRC_PACR21(x) (((x)&0x0F)<<8) +#define SCM_PACRC_PACR22(x) (((x)&0x0F)<<4) +#define SCM_PACRC_PACR23(x) (((x)&0x0F)<<0) /* Bit definitions and macros for SCM_PACRD */ -#define SCM_PACRD_PACR24(x) (((x)&0x0F)<<28) -#define SCM_PACRD_PACR25(x) (((x)&0x0F)<<24) -#define SCM_PACRD_PACR26(x) (((x)&0x0F)<<20) -#define SCM_PACRD_PACR28(x) (((x)&0x0F)<<12) -#define SCM_PACRD_PACR29(x) (((x)&0x0F)<<8) -#define SCM_PACRD_PACR30(x) (((x)&0x0F)<<4) -#define SCM_PACRD_PACR31(x) (((x)&0x0F)<<0) +#define SCM_PACRD_PACR24(x) (((x)&0x0F)<<28) +#define SCM_PACRD_PACR25(x) (((x)&0x0F)<<24) +#define SCM_PACRD_PACR26(x) (((x)&0x0F)<<20) +#define SCM_PACRD_PACR28(x) (((x)&0x0F)<<12) +#define SCM_PACRD_PACR29(x) (((x)&0x0F)<<8) +#define SCM_PACRD_PACR30(x) (((x)&0x0F)<<4) +#define SCM_PACRD_PACR31(x) (((x)&0x0F)<<0) /* Bit definitions and macros for SCM_PACRE */ -#define SCM_PACRE_PACR32(x) (((x)&0x0F)<<28) -#define SCM_PACRE_PACR33(x) (((x)&0x0F)<<24) -#define SCM_PACRE_PACR34(x) (((x)&0x0F)<<20) -#define SCM_PACRE_PACR35(x) (((x)&0x0F)<<16) -#define SCM_PACRE_PACR36(x) (((x)&0x0F)<<12) -#define SCM_PACRE_PACR37(x) (((x)&0x0F)<<8) -#define SCM_PACRE_PACR38(x) (((x)&0x0F)<<4) +#define SCM_PACRE_PACR32(x) (((x)&0x0F)<<28) +#define SCM_PACRE_PACR33(x) (((x)&0x0F)<<24) +#define SCM_PACRE_PACR34(x) (((x)&0x0F)<<20) +#define SCM_PACRE_PACR35(x) (((x)&0x0F)<<16) +#define SCM_PACRE_PACR36(x) (((x)&0x0F)<<12) +#define SCM_PACRE_PACR37(x) (((x)&0x0F)<<8) +#define SCM_PACRE_PACR38(x) (((x)&0x0F)<<4) /* Bit definitions and macros for SCM_PACRF */ -#define SCM_PACRF_PACR40(x) (((x)&0x0F)<<28) -#define SCM_PACRF_PACR41(x) (((x)&0x0F)<<24) -#define SCM_PACRF_PACR42(x) (((x)&0x0F)<<20) -#define SCM_PACRF_PACR43(x) (((x)&0x0F)<<16) -#define SCM_PACRF_PACR44(x) (((x)&0x0F)<<12) -#define SCM_PACRF_PACR45(x) (((x)&0x0F)<<8) -#define SCM_PACRF_PACR46(x) (((x)&0x0F)<<4) -#define SCM_PACRF_PACR47(x) (((x)&0x0F)<<0) +#define SCM_PACRF_PACR40(x) (((x)&0x0F)<<28) +#define SCM_PACRF_PACR41(x) (((x)&0x0F)<<24) +#define SCM_PACRF_PACR42(x) (((x)&0x0F)<<20) +#define SCM_PACRF_PACR43(x) (((x)&0x0F)<<16) +#define SCM_PACRF_PACR44(x) (((x)&0x0F)<<12) +#define SCM_PACRF_PACR45(x) (((x)&0x0F)<<8) +#define SCM_PACRF_PACR46(x) (((x)&0x0F)<<4) +#define SCM_PACRF_PACR47(x) (((x)&0x0F)<<0) /* Bit definitions and macros for SCM_PACRG */ -#define SCM_PACRG_PACR48(x) (((x)&0x0F)<<28) +#define SCM_PACRG_PACR48(x) (((x)&0x0F)<<28) /* Bit definitions and macros for SCM_PACRH */ -#define SCM_PACRH_PACR56(x) (((x)&0x0F)<<28) -#define SCM_PACRH_PACR57(x) (((x)&0x0F)<<24) -#define SCM_PACRH_PACR58(x) (((x)&0x0F)<<20) +#define SCM_PACRH_PACR56(x) (((x)&0x0F)<<28) +#define SCM_PACRH_PACR57(x) (((x)&0x0F)<<24) +#define SCM_PACRH_PACR58(x) (((x)&0x0F)<<20) /* PACRn Assignments */ -#define PACR0(x) SCM_PACRA_PACR0(x) -#define PACR1(x) SCM_PACRA_PACR1(x) -#define PACR2(x) SCM_PACRA_PACR2(x) -#define PACR8(x) SCM_PACRB_PACR8(x) -#define PACR12(x) SCM_PACRB_PACR12(x) -#define PACR16(x) SCM_PACRC_PACR16(x) -#define PACR17(x) SCM_PACRC_PACR17(x) -#define PACR18(x) SCM_PACRC_PACR18(x) -#define PACR19(x) SCM_PACRC_PACR19(x) -#define PACR21(x) SCM_PACRC_PACR21(x) -#define PACR22(x) SCM_PACRC_PACR22(x) -#define PACR23(x) SCM_PACRC_PACR23(x) -#define PACR24(x) SCM_PACRD_PACR24(x) -#define PACR25(x) SCM_PACRD_PACR25(x) -#define PACR26(x) SCM_PACRD_PACR26(x) -#define PACR28(x) SCM_PACRD_PACR28(x) -#define PACR29(x) SCM_PACRD_PACR29(x) -#define PACR30(x) SCM_PACRD_PACR30(x) -#define PACR31(x) SCM_PACRD_PACR31(x) -#define PACR32(x) SCM_PACRE_PACR32(x) -#define PACR33(x) SCM_PACRE_PACR33(x) -#define PACR34(x) SCM_PACRE_PACR34(x) -#define PACR35(x) SCM_PACRE_PACR35(x) -#define PACR36(x) SCM_PACRE_PACR36(x) -#define PACR37(x) SCM_PACRE_PACR37(x) -#define PACR38(x) SCM_PACRE_PACR38(x) -#define PACR40(x) SCM_PACRF_PACR40(x) -#define PACR41(x) SCM_PACRF_PACR41(x) -#define PACR42(x) SCM_PACRF_PACR42(x) -#define PACR43(x) SCM_PACRF_PACR43(x) -#define PACR44(x) SCM_PACRF_PACR44(x) -#define PACR45(x) SCM_PACRF_PACR45(x) -#define PACR46(x) SCM_PACRF_PACR46(x) -#define PACR47(x) SCM_PACRF_PACR47(x) -#define PACR48(x) SCM_PACRG_PACR48(x) -#define PACR56(x) SCM_PACRH_PACR56(x) -#define PACR57(x) SCM_PACRH_PACR57(x) -#define PACR58(x) SCM_PACRH_PACR58(x) +#define PACR0(x) SCM_PACRA_PACR0(x) +#define PACR1(x) SCM_PACRA_PACR1(x) +#define PACR2(x) SCM_PACRA_PACR2(x) +#define PACR8(x) SCM_PACRB_PACR8(x) +#define PACR12(x) SCM_PACRB_PACR12(x) +#define PACR16(x) SCM_PACRC_PACR16(x) +#define PACR17(x) SCM_PACRC_PACR17(x) +#define PACR18(x) SCM_PACRC_PACR18(x) +#define PACR19(x) SCM_PACRC_PACR19(x) +#define PACR21(x) SCM_PACRC_PACR21(x) +#define PACR22(x) SCM_PACRC_PACR22(x) +#define PACR23(x) SCM_PACRC_PACR23(x) +#define PACR24(x) SCM_PACRD_PACR24(x) +#define PACR25(x) SCM_PACRD_PACR25(x) +#define PACR26(x) SCM_PACRD_PACR26(x) +#define PACR28(x) SCM_PACRD_PACR28(x) +#define PACR29(x) SCM_PACRD_PACR29(x) +#define PACR30(x) SCM_PACRD_PACR30(x) +#define PACR31(x) SCM_PACRD_PACR31(x) +#define PACR32(x) SCM_PACRE_PACR32(x) +#define PACR33(x) SCM_PACRE_PACR33(x) +#define PACR34(x) SCM_PACRE_PACR34(x) +#define PACR35(x) SCM_PACRE_PACR35(x) +#define PACR36(x) SCM_PACRE_PACR36(x) +#define PACR37(x) SCM_PACRE_PACR37(x) +#define PACR38(x) SCM_PACRE_PACR38(x) +#define PACR40(x) SCM_PACRF_PACR40(x) +#define PACR41(x) SCM_PACRF_PACR41(x) +#define PACR42(x) SCM_PACRF_PACR42(x) +#define PACR43(x) SCM_PACRF_PACR43(x) +#define PACR44(x) SCM_PACRF_PACR44(x) +#define PACR45(x) SCM_PACRF_PACR45(x) +#define PACR46(x) SCM_PACRF_PACR46(x) +#define PACR47(x) SCM_PACRF_PACR47(x) +#define PACR48(x) SCM_PACRG_PACR48(x) +#define PACR56(x) SCM_PACRH_PACR56(x) +#define PACR57(x) SCM_PACRH_PACR57(x) +#define PACR58(x) SCM_PACRH_PACR58(x) /* Bit definitions and macros for SCM_CWCR */ -#define CWCR_RO (0x8000) -#define CWCR_CWR_WH (0x0100) -#define CWCR_CWE (0x0080) -#define CWRI_WINDOW (0x0060) -#define CWRI_RESET (0x0040) -#define CWRI_INT_RESET (0x0020) -#define CWRI_INT (0x0000) -#define CWCR_CWT(x) (((x)&0x001F)) +#define CWCR_RO (0x8000) +#define CWCR_CWR_WH (0x0100) +#define CWCR_CWE (0x0080) +#define CWRI_WINDOW (0x0060) +#define CWRI_RESET (0x0040) +#define CWRI_INT_RESET (0x0020) +#define CWRI_INT (0x0000) +#define CWCR_CWT(x) (((x)&0x001F)) /* Bit definitions and macros for SCM_ISR */ -#define SCMISR_CFEI (0x02) -#define SCMISR_CWIC (0x01) +#define SCMISR_CFEI (0x02) +#define SCMISR_CWIC (0x01) /* Bit definitions and macros for SCM_BCR */ -#define BCR_GBR (0x00000200) -#define BCR_GBW (0x00000100) -#define BCR_S7 (0x00000080) -#define BCR_S6 (0x00000040) -#define BCR_S4 (0x00000010) -#define BCR_S1 (0x00000002) +#define BCR_GBR (0x00000200) +#define BCR_GBW (0x00000100) +#define BCR_S7 (0x00000080) +#define BCR_S6 (0x00000040) +#define BCR_S4 (0x00000010) +#define BCR_S1 (0x00000002) /* Bit definitions and macros for SCM_CFIER */ -#define CFIER_ECFEI (0x01) +#define CFIER_ECFEI (0x01) /* Bit definitions and macros for SCM_CFLOC */ -#define CFLOC_LOC (0x80) +#define CFLOC_LOC (0x80) /* Bit definitions and macros for SCM_CFATR */ -#define CFATR_WRITE (0x80) -#define CFATR_SZ32 (0x20) -#define CFATR_SZ16 (0x10) -#define CFATR_SZ08 (0x00) -#define CFATR_CACHE (0x08) -#define CFATR_MODE (0x02) -#define CFATR_TYPE (0x01) - -/********************************************************************* -* -* Random Number Generator (RNG) -* -*********************************************************************/ -/* Bit definitions and macros for RNG_RNGCR */ -#define RNGCR_CI (0x00000008) -#define RNGCR_IM (0x00000004) -#define RNGCR_HA (0x00000002) -#define RNGCR_GO (0x00000001) - -/* Bit definitions and macros for RNG_RNGSR */ -#define RNGSR_OFS(x) (((x)&0xFF)<<16) -#define RNGSR_OFL(x) (((x)&0xFF)<<8) -#define RNGSR_EI (0x00000008) -#define RNGSR_FUF (0x00000004) -#define RNGSR_LRS (0x00000002) -#define RNGSR_SV (0x00000001) +#define CFATR_WRITE (0x80) +#define CFATR_SZ32 (0x20) +#define CFATR_SZ16 (0x10) +#define CFATR_SZ08 (0x00) +#define CFATR_CACHE (0x08) +#define CFATR_MODE (0x02) +#define CFATR_TYPE (0x01) /********************************************************************* * FlexBus Chip Selects (FBCS) *********************************************************************/ /* Bit definitions and macros for FBCS_CSAR */ -#define CSAR_BA(x) (((x)&0xFFFF)<<16) +#define CSAR_BA(x) (((x)&0xFFFF)<<16) /* Bit definitions and macros for FBCS_CSMR */ -#define CSMR_BAM(x) (((x)&0xFFFF)<<16) -#define CSMR_BAM_4G (0xFFFF0000) -#define CSMR_BAM_2G (0x7FFF0000) -#define CSMR_BAM_1G (0x3FFF0000) -#define CSMR_BAM_1024M (0x3FFF0000) -#define CSMR_BAM_512M (0x1FFF0000) -#define CSMR_BAM_256M (0x0FFF0000) -#define CSMR_BAM_128M (0x07FF0000) -#define CSMR_BAM_64M (0x03FF0000) -#define CSMR_BAM_32M (0x01FF0000) -#define CSMR_BAM_16M (0x00FF0000) -#define CSMR_BAM_8M (0x007F0000) -#define CSMR_BAM_4M (0x003F0000) -#define CSMR_BAM_2M (0x001F0000) -#define CSMR_BAM_1M (0x000F0000) -#define CSMR_BAM_1024K (0x000F0000) -#define CSMR_BAM_512K (0x00070000) -#define CSMR_BAM_256K (0x00030000) -#define CSMR_BAM_128K (0x00010000) -#define CSMR_BAM_64K (0x00000000) -#define CSMR_WP (0x00000100) -#define CSMR_V (0x00000001) +#define CSMR_BAM(x) (((x)&0xFFFF)<<16) +#define CSMR_BAM_4G (0xFFFF0000) +#define CSMR_BAM_2G (0x7FFF0000) +#define CSMR_BAM_1G (0x3FFF0000) +#define CSMR_BAM_1024M (0x3FFF0000) +#define CSMR_BAM_512M (0x1FFF0000) +#define CSMR_BAM_256M (0x0FFF0000) +#define CSMR_BAM_128M (0x07FF0000) +#define CSMR_BAM_64M (0x03FF0000) +#define CSMR_BAM_32M (0x01FF0000) +#define CSMR_BAM_16M (0x00FF0000) +#define CSMR_BAM_8M (0x007F0000) +#define CSMR_BAM_4M (0x003F0000) +#define CSMR_BAM_2M (0x001F0000) +#define CSMR_BAM_1M (0x000F0000) +#define CSMR_BAM_1024K (0x000F0000) +#define CSMR_BAM_512K (0x00070000) +#define CSMR_BAM_256K (0x00030000) +#define CSMR_BAM_128K (0x00010000) +#define CSMR_BAM_64K (0x00000000) +#define CSMR_WP (0x00000100) +#define CSMR_V (0x00000001) /* Bit definitions and macros for FBCS_CSCR */ -#define CSCR_SWS(x) (((x)&0x3F)<<26) -#define CSCR_ASET(x) (((x)&0x03)<<20) -#define CSCR_SWSEN (0x00800000) -#define CSCR_ASET_4CLK (0x00300000) -#define CSCR_ASET_3CLK (0x00200000) -#define CSCR_ASET_2CLK (0x00100000) -#define CSCR_ASET_1CLK (0x00000000) -#define CSCR_RDAH(x) (((x)&0x03)<<18) -#define CSCR_RDAH_4CYC (0x000C0000) -#define CSCR_RDAH_3CYC (0x00080000) -#define CSCR_RDAH_2CYC (0x00040000) -#define CSCR_RDAH_1CYC (0x00000000) -#define CSCR_WRAH(x) (((x)&0x03)<<16) -#define CSCR_WDAH_4CYC (0x00003000) -#define CSCR_WDAH_3CYC (0x00002000) -#define CSCR_WDAH_2CYC (0x00001000) -#define CSCR_WDAH_1CYC (0x00000000) -#define CSCR_WS(x) (((x)&0x3F)<<10) -#define CSCR_SBM (0x00000200) -#define CSCR_AA (0x00000100) -#define CSCR_PS_MASK (0x000000C0) -#define CSCR_PS_32 (0x00000000) -#define CSCR_PS_16 (0x00000080) -#define CSCR_PS_8 (0x00000040) -#define CSCR_BEM (0x00000020) -#define CSCR_BSTR (0x00000010) -#define CSCR_BSTW (0x00000008) +#define CSCR_SWS(x) (((x)&0x3F)<<26) +#define CSCR_ASET(x) (((x)&0x03)<<20) +#define CSCR_SWSEN (0x00800000) +#define CSCR_ASET_4CLK (0x00300000) +#define CSCR_ASET_3CLK (0x00200000) +#define CSCR_ASET_2CLK (0x00100000) +#define CSCR_ASET_1CLK (0x00000000) +#define CSCR_RDAH(x) (((x)&0x03)<<18) +#define CSCR_RDAH_4CYC (0x000C0000) +#define CSCR_RDAH_3CYC (0x00080000) +#define CSCR_RDAH_2CYC (0x00040000) +#define CSCR_RDAH_1CYC (0x00000000) +#define CSCR_WRAH(x) (((x)&0x03)<<16) +#define CSCR_WDAH_4CYC (0x00003000) +#define CSCR_WDAH_3CYC (0x00002000) +#define CSCR_WDAH_2CYC (0x00001000) +#define CSCR_WDAH_1CYC (0x00000000) +#define CSCR_WS(x) (((x)&0x3F)<<10) +#define CSCR_SBM (0x00000200) +#define CSCR_AA (0x00000100) +#define CSCR_PS_MASK (0x000000C0) +#define CSCR_PS_32 (0x00000000) +#define CSCR_PS_16 (0x00000080) +#define CSCR_PS_8 (0x00000040) +#define CSCR_BEM (0x00000020) +#define CSCR_BSTR (0x00000010) +#define CSCR_BSTW (0x00000008) /********************************************************************* * FlexCAN Module (CAN) *********************************************************************/ /* Bit definitions and macros for CAN_CANMCR */ -#define CANMCR_MDIS (0x80000000) -#define CANMCR_FRZ (0x40000000) -#define CANMCR_HALT (0x10000000) -#define CANMCR_NORDY (0x08000000) -#define CANMCR_SOFTRST (0x02000000) -#define CANMCR_FRZACK (0x01000000) -#define CANMCR_SUPV (0x00800000) -#define CANMCR_LPMACK (0x00100000) -#define CANMCR_MAXMB(x) (((x)&0x0F)) +#define CANMCR_MDIS (0x80000000) +#define CANMCR_FRZ (0x40000000) +#define CANMCR_HALT (0x10000000) +#define CANMCR_NORDY (0x08000000) +#define CANMCR_SOFTRST (0x02000000) +#define CANMCR_FRZACK (0x01000000) +#define CANMCR_SUPV (0x00800000) +#define CANMCR_LPMACK (0x00100000) +#define CANMCR_MAXMB(x) (((x)&0x0F)) /* Bit definitions and macros for CAN_CANCTRL */ -#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) -#define CANCTRL_RJW(x) (((x)&0x03)<<22) -#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) -#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) -#define CANCTRL_BOFFMSK (0x00008000) -#define CANCTRL_ERRMSK (0x00004000) -#define CANCTRL_CLKSRC (0x00002000) -#define CANCTRL_LPB (0x00001000) -#define CANCTRL_SMP (0x00000080) -#define CANCTRL_BOFFREC (0x00000040) -#define CANCTRL_TSYNC (0x00000020) -#define CANCTRL_LBUF (0x00000010) -#define CANCTRL_LOM (0x00000008) -#define CANCTRL_PROPSEG(x) (((x)&0x07)) +#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) +#define CANCTRL_RJW(x) (((x)&0x03)<<22) +#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) +#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) +#define CANCTRL_BOFFMSK (0x00008000) +#define CANCTRL_ERRMSK (0x00004000) +#define CANCTRL_CLKSRC (0x00002000) +#define CANCTRL_LPB (0x00001000) +#define CANCTRL_SMP (0x00000080) +#define CANCTRL_BOFFREC (0x00000040) +#define CANCTRL_TSYNC (0x00000020) +#define CANCTRL_LBUF (0x00000010) +#define CANCTRL_LOM (0x00000008) +#define CANCTRL_PROPSEG(x) (((x)&0x07)) /* Bit definitions and macros for CAN_TIMER */ -#define TIMER_TIMER(x) ((x)&0xFFFF) +#define TIMER_TIMER(x) ((x)&0xFFFF) /* Bit definitions and macros for CAN_RXGMASK */ -#define RXGMASK_MI(x) ((x)&0x1FFFFFFF) +#define RXGMASK_MI(x) ((x)&0x1FFFFFFF) /* Bit definitions and macros for CAN_ERRCNT */ -#define ERRCNT_TXECTR(x) (((x)&0xFF)) -#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) +#define ERRCNT_TXECTR(x) (((x)&0xFF)) +#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) /* Bit definitions and macros for CAN_ERRSTAT */ -#define ERRSTAT_BITERR1 (0x00008000) -#define ERRSTAT_BITERR0 (0x00004000) -#define ERRSTAT_ACKERR (0x00002000) -#define ERRSTAT_CRCERR (0x00001000) -#define ERRSTAT_FRMERR (0x00000800) -#define ERRSTAT_STFERR (0x00000400) -#define ERRSTAT_TXWRN (0x00000200) -#define ERRSTAT_RXWRN (0x00000100) -#define ERRSTAT_IDLE (0x00000080) -#define ERRSTAT_TXRX (0x00000040) -#define ERRSTAT_FLT_BUSOFF (0x00000020) -#define ERRSTAT_FLT_PASSIVE (0x00000010) -#define ERRSTAT_FLT_ACTIVE (0x00000000) -#define ERRSTAT_BOFFINT (0x00000004) -#define ERRSTAT_ERRINT (0x00000002) -#define ERRSTAT_WAKINT (0x00000001) +#define ERRSTAT_BITERR1 (0x00008000) +#define ERRSTAT_BITERR0 (0x00004000) +#define ERRSTAT_ACKERR (0x00002000) +#define ERRSTAT_CRCERR (0x00001000) +#define ERRSTAT_FRMERR (0x00000800) +#define ERRSTAT_STFERR (0x00000400) +#define ERRSTAT_TXWRN (0x00000200) +#define ERRSTAT_RXWRN (0x00000100) +#define ERRSTAT_IDLE (0x00000080) +#define ERRSTAT_TXRX (0x00000040) +#define ERRSTAT_FLT_BUSOFF (0x00000020) +#define ERRSTAT_FLT_PASSIVE (0x00000010) +#define ERRSTAT_FLT_ACTIVE (0x00000000) +#define ERRSTAT_BOFFINT (0x00000004) +#define ERRSTAT_ERRINT (0x00000002) +#define ERRSTAT_WAKINT (0x00000001) /* Bit definitions and macros for CAN_IMASK */ -#define IMASK_BUF15M (0x00008000) -#define IMASK_BUF14M (0x00004000) -#define IMASK_BUF13M (0x00002000) -#define IMASK_BUF12M (0x00001000) -#define IMASK_BUF11M (0x00000800) -#define IMASK_BUF10M (0x00000400) -#define IMASK_BUF9M (0x00000200) -#define IMASK_BUF8M (0x00000100) -#define IMASK_BUF7M (0x00000080) -#define IMASK_BUF6M (0x00000040) -#define IMASK_BUF5M (0x00000020) -#define IMASK_BUF4M (0x00000010) -#define IMASK_BUF3M (0x00000008) -#define IMASK_BUF2M (0x00000004) -#define IMASK_BUF1M (0x00000002) -#define IMASK_BUF0M (0x00000001) +#define IMASK_BUF15M (0x00008000) +#define IMASK_BUF14M (0x00004000) +#define IMASK_BUF13M (0x00002000) +#define IMASK_BUF12M (0x00001000) +#define IMASK_BUF11M (0x00000800) +#define IMASK_BUF10M (0x00000400) +#define IMASK_BUF9M (0x00000200) +#define IMASK_BUF8M (0x00000100) +#define IMASK_BUF7M (0x00000080) +#define IMASK_BUF6M (0x00000040) +#define IMASK_BUF5M (0x00000020) +#define IMASK_BUF4M (0x00000010) +#define IMASK_BUF3M (0x00000008) +#define IMASK_BUF2M (0x00000004) +#define IMASK_BUF1M (0x00000002) +#define IMASK_BUF0M (0x00000001) /* Bit definitions and macros for CAN_IFLAG */ -#define IFLAG_BUF15I (0x00008000) -#define IFLAG_BUF14I (0x00004000) -#define IFLAG_BUF13I (0x00002000) -#define IFLAG_BUF12I (0x00001000) -#define IFLAG_BUF11I (0x00000800) -#define IFLAG_BUF10I (0x00000400) -#define IFLAG_BUF9I (0x00000200) -#define IFLAG_BUF8I (0x00000100) -#define IFLAG_BUF7I (0x00000080) -#define IFLAG_BUF6I (0x00000040) -#define IFLAG_BUF5I (0x00000020) -#define IFLAG_BUF4I (0x00000010) -#define IFLAG_BUF3I (0x00000008) -#define IFLAG_BUF2I (0x00000004) -#define IFLAG_BUF1I (0x00000002) -#define IFLAG_BUF0I (0x00000001) +#define IFLAG_BUF15I (0x00008000) +#define IFLAG_BUF14I (0x00004000) +#define IFLAG_BUF13I (0x00002000) +#define IFLAG_BUF12I (0x00001000) +#define IFLAG_BUF11I (0x00000800) +#define IFLAG_BUF10I (0x00000400) +#define IFLAG_BUF9I (0x00000200) +#define IFLAG_BUF8I (0x00000100) +#define IFLAG_BUF7I (0x00000080) +#define IFLAG_BUF6I (0x00000040) +#define IFLAG_BUF5I (0x00000020) +#define IFLAG_BUF4I (0x00000010) +#define IFLAG_BUF3I (0x00000008) +#define IFLAG_BUF2I (0x00000004) +#define IFLAG_BUF1I (0x00000002) +#define IFLAG_BUF0I (0x00000001) /********************************************************************* * Interrupt Controller (INTC) *********************************************************************/ -#define INTC0_EPORT INTC_IPRL_INT1 - -#define INT0_LO_RSVD0 (0) -#define INT0_LO_EPORT1 (1) -#define INT0_LO_EPORT2 (2) -#define INT0_LO_EPORT3 (3) -#define INT0_LO_EPORT4 (4) -#define INT0_LO_EPORT5 (5) -#define INT0_LO_EPORT6 (6) -#define INT0_LO_EPORT7 (7) -#define INT0_LO_EDMA_00 (8) -#define INT0_LO_EDMA_01 (9) -#define INT0_LO_EDMA_02 (10) -#define INT0_LO_EDMA_03 (11) -#define INT0_LO_EDMA_04 (12) -#define INT0_LO_EDMA_05 (13) -#define INT0_LO_EDMA_06 (14) -#define INT0_LO_EDMA_07 (15) -#define INT0_LO_EDMA_08 (16) -#define INT0_LO_EDMA_09 (17) -#define INT0_LO_EDMA_10 (18) -#define INT0_LO_EDMA_11 (19) -#define INT0_LO_EDMA_12 (20) -#define INT0_LO_EDMA_13 (21) -#define INT0_LO_EDMA_14 (22) -#define INT0_LO_EDMA_15 (23) -#define INT0_LO_EDMA_ERR (24) -#define INT0_LO_SCM (25) -#define INT0_LO_UART0 (26) -#define INT0_LO_UART1 (27) -#define INT0_LO_UART2 (28) -#define INT0_LO_RSVD1 (29) -#define INT0_LO_I2C (30) -#define INT0_LO_QSPI (31) -#define INT0_HI_DTMR0 (32) -#define INT0_HI_DTMR1 (33) -#define INT0_HI_DTMR2 (34) -#define INT0_HI_DTMR3 (35) -#define INT0_HI_FEC_TXF (36) -#define INT0_HI_FEC_TXB (37) -#define INT0_HI_FEC_UN (38) -#define INT0_HI_FEC_RL (39) -#define INT0_HI_FEC_RXF (40) -#define INT0_HI_FEC_RXB (41) -#define INT0_HI_FEC_MII (42) -#define INT0_HI_FEC_LC (43) -#define INT0_HI_FEC_HBERR (44) -#define INT0_HI_FEC_GRA (45) -#define INT0_HI_FEC_EBERR (46) -#define INT0_HI_FEC_BABT (47) -#define INT0_HI_FEC_BABR (48) +#define INTC0_EPORT INTC_IPRL_INT1 + +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_EDMA_00 (8) +#define INT0_LO_EDMA_01 (9) +#define INT0_LO_EDMA_02 (10) +#define INT0_LO_EDMA_03 (11) +#define INT0_LO_EDMA_04 (12) +#define INT0_LO_EDMA_05 (13) +#define INT0_LO_EDMA_06 (14) +#define INT0_LO_EDMA_07 (15) +#define INT0_LO_EDMA_08 (16) +#define INT0_LO_EDMA_09 (17) +#define INT0_LO_EDMA_10 (18) +#define INT0_LO_EDMA_11 (19) +#define INT0_LO_EDMA_12 (20) +#define INT0_LO_EDMA_13 (21) +#define INT0_LO_EDMA_14 (22) +#define INT0_LO_EDMA_15 (23) +#define INT0_LO_EDMA_ERR (24) +#define INT0_LO_SCM (25) +#define INT0_LO_UART0 (26) +#define INT0_LO_UART1 (27) +#define INT0_LO_UART2 (28) +#define INT0_LO_RSVD1 (29) +#define INT0_LO_I2C (30) +#define INT0_LO_QSPI (31) +#define INT0_HI_DTMR0 (32) +#define INT0_HI_DTMR1 (33) +#define INT0_HI_DTMR2 (34) +#define INT0_HI_DTMR3 (35) +#define INT0_HI_FEC_TXF (36) +#define INT0_HI_FEC_TXB (37) +#define INT0_HI_FEC_UN (38) +#define INT0_HI_FEC_RL (39) +#define INT0_HI_FEC_RXF (40) +#define INT0_HI_FEC_RXB (41) +#define INT0_HI_FEC_MII (42) +#define INT0_HI_FEC_LC (43) +#define INT0_HI_FEC_HBERR (44) +#define INT0_HI_FEC_GRA (45) +#define INT0_HI_FEC_EBERR (46) +#define INT0_HI_FEC_BABT (47) +#define INT0_HI_FEC_BABR (48) /* 49 - 61 Reserved */ -#define INT0_HI_SCM (62) - -/*#define INT1_HI_ */ +#define INT0_HI_SCM (62) /* Bit definitions and macros for INTC_IPRH */ -#define INTC_IPRH_INT63 (0x80000000) -#define INTC_IPRH_INT62 (0x40000000) -#define INTC_IPRH_INT61 (0x20000000) -#define INTC_IPRH_INT60 (0x10000000) -#define INTC_IPRH_INT59 (0x08000000) -#define INTC_IPRH_INT58 (0x04000000) -#define INTC_IPRH_INT57 (0x02000000) -#define INTC_IPRH_INT56 (0x01000000) -#define INTC_IPRH_INT55 (0x00800000) -#define INTC_IPRH_INT54 (0x00400000) -#define INTC_IPRH_INT53 (0x00200000) -#define INTC_IPRH_INT52 (0x00100000) -#define INTC_IPRH_INT51 (0x00080000) -#define INTC_IPRH_INT50 (0x00040000) -#define INTC_IPRH_INT49 (0x00020000) -#define INTC_IPRH_INT48 (0x00010000) -#define INTC_IPRH_INT47 (0x00008000) -#define INTC_IPRH_INT46 (0x00004000) -#define INTC_IPRH_INT45 (0x00002000) -#define INTC_IPRH_INT44 (0x00001000) -#define INTC_IPRH_INT43 (0x00000800) -#define INTC_IPRH_INT42 (0x00000400) -#define INTC_IPRH_INT41 (0x00000200) -#define INTC_IPRH_INT40 (0x00000100) -#define INTC_IPRH_INT39 (0x00000080) -#define INTC_IPRH_INT38 (0x00000040) -#define INTC_IPRH_INT37 (0x00000020) -#define INTC_IPRH_INT36 (0x00000010) -#define INTC_IPRH_INT35 (0x00000008) -#define INTC_IPRH_INT34 (0x00000004) -#define INTC_IPRH_INT33 (0x00000002) -#define INTC_IPRH_INT32 (0x00000001) +#define INTC_IPRH_INT63 (0x80000000) +#define INTC_IPRH_INT62 (0x40000000) +#define INTC_IPRH_INT61 (0x20000000) +#define INTC_IPRH_INT60 (0x10000000) +#define INTC_IPRH_INT59 (0x08000000) +#define INTC_IPRH_INT58 (0x04000000) +#define INTC_IPRH_INT57 (0x02000000) +#define INTC_IPRH_INT56 (0x01000000) +#define INTC_IPRH_INT55 (0x00800000) +#define INTC_IPRH_INT54 (0x00400000) +#define INTC_IPRH_INT53 (0x00200000) +#define INTC_IPRH_INT52 (0x00100000) +#define INTC_IPRH_INT51 (0x00080000) +#define INTC_IPRH_INT50 (0x00040000) +#define INTC_IPRH_INT49 (0x00020000) +#define INTC_IPRH_INT48 (0x00010000) +#define INTC_IPRH_INT47 (0x00008000) +#define INTC_IPRH_INT46 (0x00004000) +#define INTC_IPRH_INT45 (0x00002000) +#define INTC_IPRH_INT44 (0x00001000) +#define INTC_IPRH_INT43 (0x00000800) +#define INTC_IPRH_INT42 (0x00000400) +#define INTC_IPRH_INT41 (0x00000200) +#define INTC_IPRH_INT40 (0x00000100) +#define INTC_IPRH_INT39 (0x00000080) +#define INTC_IPRH_INT38 (0x00000040) +#define INTC_IPRH_INT37 (0x00000020) +#define INTC_IPRH_INT36 (0x00000010) +#define INTC_IPRH_INT35 (0x00000008) +#define INTC_IPRH_INT34 (0x00000004) +#define INTC_IPRH_INT33 (0x00000002) +#define INTC_IPRH_INT32 (0x00000001) /* Bit definitions and macros for INTC_IPRL */ -#define INTC_IPRL_INT31 (0x80000000) -#define INTC_IPRL_INT30 (0x40000000) -#define INTC_IPRL_INT29 (0x20000000) -#define INTC_IPRL_INT28 (0x10000000) -#define INTC_IPRL_INT27 (0x08000000) -#define INTC_IPRL_INT26 (0x04000000) -#define INTC_IPRL_INT25 (0x02000000) -#define INTC_IPRL_INT24 (0x01000000) -#define INTC_IPRL_INT23 (0x00800000) -#define INTC_IPRL_INT22 (0x00400000) -#define INTC_IPRL_INT21 (0x00200000) -#define INTC_IPRL_INT20 (0x00100000) -#define INTC_IPRL_INT19 (0x00080000) -#define INTC_IPRL_INT18 (0x00040000) -#define INTC_IPRL_INT17 (0x00020000) -#define INTC_IPRL_INT16 (0x00010000) -#define INTC_IPRL_INT15 (0x00008000) -#define INTC_IPRL_INT14 (0x00004000) -#define INTC_IPRL_INT13 (0x00002000) -#define INTC_IPRL_INT12 (0x00001000) -#define INTC_IPRL_INT11 (0x00000800) -#define INTC_IPRL_INT10 (0x00000400) -#define INTC_IPRL_INT9 (0x00000200) -#define INTC_IPRL_INT8 (0x00000100) -#define INTC_IPRL_INT7 (0x00000080) -#define INTC_IPRL_INT6 (0x00000040) -#define INTC_IPRL_INT5 (0x00000020) -#define INTC_IPRL_INT4 (0x00000010) -#define INTC_IPRL_INT3 (0x00000008) -#define INTC_IPRL_INT2 (0x00000004) -#define INTC_IPRL_INT1 (0x00000002) -#define INTC_IPRL_INT0 (0x00000001) +#define INTC_IPRL_INT31 (0x80000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT0 (0x00000001) /* Bit definitions and macros for INTC_ICONFIG */ -#define INTC_ICFG_ELVLPRI7 (0x8000) -#define INTC_ICFG_ELVLPRI6 (0x4000) -#define INTC_ICFG_ELVLPRI5 (0x2000) -#define INTC_ICFG_ELVLPRI4 (0x1000) -#define INTC_ICFG_ELVLPRI3 (0x0800) -#define INTC_ICFG_ELVLPRI2 (0x0400) -#define INTC_ICFG_ELVLPRI1 (0x0200) -#define INTC_ICFG_EMASK (0x0020) +#define INTC_ICFG_ELVLPRI7 (0x8000) +#define INTC_ICFG_ELVLPRI6 (0x4000) +#define INTC_ICFG_ELVLPRI5 (0x2000) +#define INTC_ICFG_ELVLPRI4 (0x1000) +#define INTC_ICFG_ELVLPRI3 (0x0800) +#define INTC_ICFG_ELVLPRI2 (0x0400) +#define INTC_ICFG_ELVLPRI1 (0x0200) +#define INTC_ICFG_EMASK (0x0020) /* Bit definitions and macros for INTC_SIMR */ -#define INTC_SIMR_SALL (0x40) -#define INTC_SIMR_SIMR(x) ((x)&0x3F) +#define INTC_SIMR_SALL (0x40) +#define INTC_SIMR_SIMR(x) ((x)&0x3F) /* Bit definitions and macros for INTC_CIMR */ -#define INTC_CIMR_CALL (0x40) -#define INTC_CIMR_CIMR(x) ((x)&0x3F) +#define INTC_CIMR_CALL (0x40) +#define INTC_CIMR_CIMR(x) ((x)&0x3F) /* Bit definitions and macros for INTC_CLMASK */ -#define INTC_CLMASK_CLMASK(x) ((x)&0x0F) +#define INTC_CLMASK_CLMASK(x) ((x)&0x0F) /* Bit definitions and macros for INTC_SLMASK */ -#define INTC_SLMASK_SLMASK(x) ((x)&0x0F) +#define INTC_SLMASK_SLMASK(x) ((x)&0x0F) /* Bit definitions and macros for INTC_ICR */ -#define INTC_ICR_IL(x) ((x)&0x07) - -/********************************************************************* -* I2C Module (I2C) -*********************************************************************/ -/* Bit definitions and macros for I2C_AR */ -#define I2C_AR_ADR(x) (((x)&0x7F)<<1) - -/* Bit definitions and macros for I2C_FDR */ -#define I2C_FDR_IC(x) ((x)&0x3F) - -/* Bit definitions and macros for I2C_CR */ -#define I2C_CR_IEN (0x80) -#define I2C_CR_IIEN (0x40) -#define I2C_CR_MSTA (0x20) -#define I2C_CR_MTX (0x10) -#define I2C_CR_TXAK (0x08) -#define I2C_CR_RSTA (0x04) - -/* Bit definitions and macros for I2C_SR */ -#define I2C_SR_ICF (0x80) -#define I2C_SR_IAAS (0x40) -#define I2C_SR_IBB (0x20) -#define I2C_SR_IAL (0x10) -#define I2C_SR_SRW (0x04) -#define I2C_SR_IIF (0x02) -#define I2C_SR_RXAK (0x01) - -/* Bit definitions and macros for I2C_ICR */ -#define I2C_ICR_BNBE (0x08) -#define I2C_ICR_TE (0x04) -#define I2C_ICR_RE (0x02) -#define I2C_ICR_IE (0x01) +#define INTC_ICR_IL(x) ((x)&0x07) /********************************************************************* * Queued Serial Peripheral Interface (QSPI) *********************************************************************/ /* Bit definitions and macros for QSPI_QMR */ -#define QSPI_QMR_MSTR (0x8000) -#define QSPI_QMR_DOHIE (0x4000) -#define QSPI_QMR_BITS(x) (((x)&0x000F)<<10) -#define QSPI_QMR_CPOL (0x0200) -#define QSPI_QMR_CPHA (0x0100) -#define QSPI_QMR_BAUD(x) ((x)&0x00FF) +#define QSPI_QMR_MSTR (0x8000) +#define QSPI_QMR_DOHIE (0x4000) +#define QSPI_QMR_BITS(x) (((x)&0x000F)<<10) +#define QSPI_QMR_CPOL (0x0200) +#define QSPI_QMR_CPHA (0x0100) +#define QSPI_QMR_BAUD(x) ((x)&0x00FF) /* Bit definitions and macros for QSPI_QDLYR */ -#define QSPI_QDLYR_SPE (0x8000) -#define QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) -#define QSPI_QDLYR_DTL(x) ((x)&0x00FF) +#define QSPI_QDLYR_SPE (0x8000) +#define QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) +#define QSPI_QDLYR_DTL(x) ((x)&0x00FF) /* Bit definitions and macros for QSPI_QWR */ -#define QSPI_QWR_NEWQP(x) ((x)&0x000F) -#define QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) -#define QSPI_QWR_CSIV (0x1000) -#define QSPI_QWR_WRTO (0x2000) -#define QSPI_QWR_WREN (0x4000) -#define QSPI_QWR_HALT (0x8000) +#define QSPI_QWR_NEWQP(x) ((x)&0x000F) +#define QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) +#define QSPI_QWR_CSIV (0x1000) +#define QSPI_QWR_WRTO (0x2000) +#define QSPI_QWR_WREN (0x4000) +#define QSPI_QWR_HALT (0x8000) /* Bit definitions and macros for QSPI_QIR */ -#define QSPI_QIR_WCEFB (0x8000) -#define QSPI_QIR_ABRTB (0x4000) -#define QSPI_QIR_ABRTL (0x1000) -#define QSPI_QIR_WCEFE (0x0800) -#define QSPI_QIR_ABRTE (0x0400) -#define QSPI_QIR_SPIFE (0x0100) -#define QSPI_QIR_WCEF (0x0008) -#define QSPI_QIR_ABRT (0x0004) -#define QSPI_QIR_SPIF (0x0001) +#define QSPI_QIR_WCEFB (0x8000) +#define QSPI_QIR_ABRTB (0x4000) +#define QSPI_QIR_ABRTL (0x1000) +#define QSPI_QIR_WCEFE (0x0800) +#define QSPI_QIR_ABRTE (0x0400) +#define QSPI_QIR_SPIFE (0x0100) +#define QSPI_QIR_WCEF (0x0008) +#define QSPI_QIR_ABRT (0x0004) +#define QSPI_QIR_SPIF (0x0001) /* Bit definitions and macros for QSPI_QAR */ -#define QSPI_QAR_ADDR(x) ((x)&0x003F) -#define QSPI_QAR_TRANS (0x0000) -#define QSPI_QAR_RECV (0x0010) -#define QSPI_QAR_CMD (0x0020) +#define QSPI_QAR_ADDR(x) ((x)&0x003F) +#define QSPI_QAR_TRANS (0x0000) +#define QSPI_QAR_RECV (0x0010) +#define QSPI_QAR_CMD (0x0020) /* Bit definitions and macros for QSPI_QDR */ -#define QSPI_QDR_CONT (0x8000) -#define QSPI_QDR_BITSE (0x4000) -#define QSPI_QDR_DT (0x2000) -#define QSPI_QDR_DSCK (0x1000) -#define QSPI_QDR_QSPI_CS3 (0x0800) -#define QSPI_QDR_QSPI_CS2 (0x0400) -#define QSPI_QDR_QSPI_CS1 (0x0200) -#define QSPI_QDR_QSPI_CS0 (0x0100) +#define QSPI_QDR_CONT (0x8000) +#define QSPI_QDR_BITSE (0x4000) +#define QSPI_QDR_DT (0x2000) +#define QSPI_QDR_DSCK (0x1000) +#define QSPI_QDR_QSPI_CS3 (0x0800) +#define QSPI_QDR_QSPI_CS2 (0x0400) +#define QSPI_QDR_QSPI_CS1 (0x0200) +#define QSPI_QDR_QSPI_CS0 (0x0100) /********************************************************************* * Pulse Width Modulation (PWM) *********************************************************************/ /* Bit definitions and macros for PWM_E */ -#define PWM_EN_PWME7 (0x80) -#define PWM_EN_PWME5 (0x20) -#define PWM_EN_PWME3 (0x08) -#define PWM_EN_PWME1 (0x02) +#define PWM_EN_PWME7 (0x80) +#define PWM_EN_PWME5 (0x20) +#define PWM_EN_PWME3 (0x08) +#define PWM_EN_PWME1 (0x02) /* Bit definitions and macros for PWM_POL */ -#define PWM_POL_PPOL7 (0x80) -#define PWM_POL_PPOL5 (0x20) -#define PWM_POL_PPOL3 (0x08) -#define PWM_POL_PPOL1 (0x02) +#define PWM_POL_PPOL7 (0x80) +#define PWM_POL_PPOL5 (0x20) +#define PWM_POL_PPOL3 (0x08) +#define PWM_POL_PPOL1 (0x02) /* Bit definitions and macros for PWM_CLK */ -#define PWM_CLK_PCLK7 (0x80) -#define PWM_CLK_PCLK5 (0x20) -#define PWM_CLK_PCLK3 (0x08) -#define PWM_CLK_PCLK1 (0x02) +#define PWM_CLK_PCLK7 (0x80) +#define PWM_CLK_PCLK5 (0x20) +#define PWM_CLK_PCLK3 (0x08) +#define PWM_CLK_PCLK1 (0x02) /* Bit definitions and macros for PWM_PRCLK */ -#define PWM_PRCLK_PCKB(x) (((x)&0x07)<<4) -#define PWM_PRCLK_PCKA(x) ((x)&0x07) +#define PWM_PRCLK_PCKB(x) (((x)&0x07)<<4) +#define PWM_PRCLK_PCKA(x) ((x)&0x07) /* Bit definitions and macros for PWM_CAE */ -#define PWM_CAE_CAE7 (0x80) -#define PWM_CAE_CAE5 (0x20) -#define PWM_CAE_CAE3 (0x08) -#define PWM_CAE_CAE1 (0x02) +#define PWM_CAE_CAE7 (0x80) +#define PWM_CAE_CAE5 (0x20) +#define PWM_CAE_CAE3 (0x08) +#define PWM_CAE_CAE1 (0x02) /* Bit definitions and macros for PWM_CTL */ -#define PWM_CTL_CON67 (0x80) -#define PWM_CTL_CON45 (0x40) -#define PWM_CTL_CON23 (0x20) -#define PWM_CTL_CON01 (0x10) -#define PWM_CTL_PSWAR (0x08) -#define PWM_CTL_PFRZ (0x04) +#define PWM_CTL_CON67 (0x80) +#define PWM_CTL_CON45 (0x40) +#define PWM_CTL_CON23 (0x20) +#define PWM_CTL_CON01 (0x10) +#define PWM_CTL_PSWAR (0x08) +#define PWM_CTL_PFRZ (0x04) /* Bit definitions and macros for PWM_SDN */ -#define PWM_SDN_IF (0x80) -#define PWM_SDN_IE (0x40) -#define PWM_SDN_RESTART (0x20) -#define PWM_SDN_LVL (0x10) -#define PWM_SDN_PWM7IN (0x04) -#define PWM_SDN_PWM7IL (0x02) -#define PWM_SDN_SDNEN (0x01) +#define PWM_SDN_IF (0x80) +#define PWM_SDN_IE (0x40) +#define PWM_SDN_RESTART (0x20) +#define PWM_SDN_LVL (0x10) +#define PWM_SDN_PWM7IN (0x04) +#define PWM_SDN_PWM7IL (0x02) +#define PWM_SDN_SDNEN (0x01) /********************************************************************* * Watchdog Timer Modules (WTM) *********************************************************************/ /* Bit definitions and macros for WTM_WCR */ -#define WTM_WCR_WAIT (0x0008) -#define WTM_WCR_DOZE (0x0004) -#define WTM_WCR_HALTED (0x0002) -#define WTM_WCR_EN (0x0001) +#define WTM_WCR_WAIT (0x0008) +#define WTM_WCR_DOZE (0x0004) +#define WTM_WCR_HALTED (0x0002) +#define WTM_WCR_EN (0x0001) /********************************************************************* * Chip Configuration Module (CCM) *********************************************************************/ /* Bit definitions and macros for CCM_CCR */ -#define CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001) -#define CCM_CCR_LIMP (0x0041) -#define CCM_CCR_LOAD (0x0021) -#define CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001) -#define CCM_CCR_OSC_MODE (0x0005) -#define CCM_CCR_PLL_MODE (0x0003) -#define CCM_CCR_RESERVED (0x0001) +#define CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001) +#define CCM_CCR_LIMP (0x0041) +#define CCM_CCR_LOAD (0x0021) +#define CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001) +#define CCM_CCR_OSC_MODE (0x0005) +#define CCM_CCR_PLL_MODE (0x0003) +#define CCM_CCR_RESERVED (0x0001) /* Bit definitions and macros for CCM_RCON */ -#define CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001) -#define CCM_RCON_LIMP (0x0041) -#define CCM_RCON_LOAD (0x0021) -#define CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001) -#define CCM_RCON_OSC_MODE (0x0005) -#define CCM_RCON_PLL_MODE (0x0003) -#define CCM_RCON_RESERVED (0x0001) +#define CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001) +#define CCM_RCON_LIMP (0x0041) +#define CCM_RCON_LOAD (0x0021) +#define CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001) +#define CCM_RCON_OSC_MODE (0x0005) +#define CCM_RCON_PLL_MODE (0x0003) +#define CCM_RCON_RESERVED (0x0001) /* Bit definitions and macros for CCM_CIR */ -#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) -#define CCM_CIR_PRN(x) ((x)&0x003F) +#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) +#define CCM_CIR_PRN(x) ((x)&0x003F) /* Bit definitions and macros for CCM_MISCCR */ -#define CCM_MISCCR_PLL_LOCK (0x2000) -#define CCM_MISCCR_LIMP (0x1000) -#define CCM_MISCCR_LCD_CHEN (0x0100) -#define CCM_MISCCR_SSI_PUE (0x0080) -#define CCM_MISCCR_SSI_PUS (0x0040) -#define CCM_MISCCR_TIM_DMA (0x0020) -#define CCM_MISCCR_SSI_SRC (0x0010) -#define CCM_MISCCR_USBDIV (0x0002) -#define CCM_MISCCR_USBSRC (0x0001) +#define CCM_MISCCR_PLL_LOCK (0x2000) +#define CCM_MISCCR_LIMP (0x1000) +#define CCM_MISCCR_LCD_CHEN (0x0100) +#define CCM_MISCCR_SSI_PUE (0x0080) +#define CCM_MISCCR_SSI_PUS (0x0040) +#define CCM_MISCCR_TIM_DMA (0x0020) +#define CCM_MISCCR_SSI_SRC (0x0010) +#define CCM_MISCCR_USBDIV (0x0002) +#define CCM_MISCCR_USBSRC (0x0001) /* Bit definitions and macros for CCM_CDR */ -#define CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) -#define CCM_CDR_SSIDIV(x) ((x)&0x000F) +#define CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) +#define CCM_CDR_SSIDIV(x) ((x)&0x000F) /* Bit definitions and macros for CCM_UHCSR */ -#define CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14) -#define CCM_UHCSR_WKUP (0x0004) -#define CCM_UHCSR_UHMIE (0x0002) -#define CCM_UHCSR_XPDE (0x0001) +#define CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14) +#define CCM_UHCSR_WKUP (0x0004) +#define CCM_UHCSR_UHMIE (0x0002) +#define CCM_UHCSR_XPDE (0x0001) /* Bit definitions and macros for CCM_UOCSR */ -#define CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14) -#define CCM_UOCSR_DPPD (0x2000) -#define CCM_UOCSR_DMPD (0x1000) -#define CCM_UOCSR_DRV_VBUS (0x0800) -#define CCM_UOCSR_CRG_VBUS (0x0400) -#define CCM_UOCSR_DCR_VBUS (0x0200) -#define CCM_UOCSR_DPPU (0x0100) -#define CCM_UOCSR_AVLD (0x0080) -#define CCM_UOCSR_BVLD (0x0040) -#define CCM_UOCSR_VVLD (0x0020) -#define CCM_UOCSR_SEND (0x0010) -#define CCM_UOCSR_PWRFLT (0x0008) -#define CCM_UOCSR_WKUP (0x0004) -#define CCM_UOCSR_UOMIE (0x0002) -#define CCM_UOCSR_XPDE (0x0001) +#define CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14) +#define CCM_UOCSR_DPPD (0x2000) +#define CCM_UOCSR_DMPD (0x1000) +#define CCM_UOCSR_DRV_VBUS (0x0800) +#define CCM_UOCSR_CRG_VBUS (0x0400) +#define CCM_UOCSR_DCR_VBUS (0x0200) +#define CCM_UOCSR_DPPU (0x0100) +#define CCM_UOCSR_AVLD (0x0080) +#define CCM_UOCSR_BVLD (0x0040) +#define CCM_UOCSR_VVLD (0x0020) +#define CCM_UOCSR_SEND (0x0010) +#define CCM_UOCSR_PWRFLT (0x0008) +#define CCM_UOCSR_WKUP (0x0004) +#define CCM_UOCSR_UOMIE (0x0002) +#define CCM_UOCSR_XPDE (0x0001) /* not done yet */ /********************************************************************* * General Purpose I/O (GPIO) *********************************************************************/ /* Bit definitions and macros for GPIO_PODR_FECH_L */ -#define GPIO_PODR_FECH_L7 (0x80) -#define GPIO_PODR_FECH_L6 (0x40) -#define GPIO_PODR_FECH_L5 (0x20) -#define GPIO_PODR_FECH_L4 (0x10) -#define GPIO_PODR_FECH_L3 (0x08) -#define GPIO_PODR_FECH_L2 (0x04) -#define GPIO_PODR_FECH_L1 (0x02) -#define GPIO_PODR_FECH_L0 (0x01) +#define GPIO_PODR_FECH_L7 (0x80) +#define GPIO_PODR_FECH_L6 (0x40) +#define GPIO_PODR_FECH_L5 (0x20) +#define GPIO_PODR_FECH_L4 (0x10) +#define GPIO_PODR_FECH_L3 (0x08) +#define GPIO_PODR_FECH_L2 (0x04) +#define GPIO_PODR_FECH_L1 (0x02) +#define GPIO_PODR_FECH_L0 (0x01) /* Bit definitions and macros for GPIO_PODR_SSI */ -#define GPIO_PODR_SSI_4 (0x10) -#define GPIO_PODR_SSI_3 (0x08) -#define GPIO_PODR_SSI_2 (0x04) -#define GPIO_PODR_SSI_1 (0x02) -#define GPIO_PODR_SSI_0 (0x01) +#define GPIO_PODR_SSI_4 (0x10) +#define GPIO_PODR_SSI_3 (0x08) +#define GPIO_PODR_SSI_2 (0x04) +#define GPIO_PODR_SSI_1 (0x02) +#define GPIO_PODR_SSI_0 (0x01) /* Bit definitions and macros for GPIO_PODR_BUSCTL */ -#define GPIO_PODR_BUSCTL_3 (0x08) -#define GPIO_PODR_BUSCTL_2 (0x04) -#define GPIO_PODR_BUSCTL_1 (0x02) -#define GPIO_PODR_BUSCTL_0 (0x01) +#define GPIO_PODR_BUSCTL_3 (0x08) +#define GPIO_PODR_BUSCTL_2 (0x04) +#define GPIO_PODR_BUSCTL_1 (0x02) +#define GPIO_PODR_BUSCTL_0 (0x01) /* Bit definitions and macros for GPIO_PODR_BE */ -#define GPIO_PODR_BE_3 (0x08) -#define GPIO_PODR_BE_2 (0x04) -#define GPIO_PODR_BE_1 (0x02) -#define GPIO_PODR_BE_0 (0x01) +#define GPIO_PODR_BE_3 (0x08) +#define GPIO_PODR_BE_2 (0x04) +#define GPIO_PODR_BE_1 (0x02) +#define GPIO_PODR_BE_0 (0x01) /* Bit definitions and macros for GPIO_PODR_CS */ -#define GPIO_PODR_CS_5 (0x20) -#define GPIO_PODR_CS_4 (0x10) -#define GPIO_PODR_CS_3 (0x08) -#define GPIO_PODR_CS_2 (0x04) -#define GPIO_PODR_CS_1 (0x02) +#define GPIO_PODR_CS_5 (0x20) +#define GPIO_PODR_CS_4 (0x10) +#define GPIO_PODR_CS_3 (0x08) +#define GPIO_PODR_CS_2 (0x04) +#define GPIO_PODR_CS_1 (0x02) /* Bit definitions and macros for GPIO_PODR_PWM */ -#define GPIO_PODR_PWM_5 (0x20) -#define GPIO_PODR_PWM_4 (0x10) -#define GPIO_PODR_PWM_3 (0x08) -#define GPIO_PODR_PWM_2 (0x04) +#define GPIO_PODR_PWM_5 (0x20) +#define GPIO_PODR_PWM_4 (0x10) +#define GPIO_PODR_PWM_3 (0x08) +#define GPIO_PODR_PWM_2 (0x04) /* Bit definitions and macros for GPIO_PODR_FECI2C */ -#define GPIO_PODR_FECI2C_3 (0x08) -#define GPIO_PODR_FECI2C_2 (0x04) -#define GPIO_PODR_FECI2C_1 (0x02) -#define GPIO_PODR_FECI2C_0 (0x01) +#define GPIO_PODR_FECI2C_3 (0x08) +#define GPIO_PODR_FECI2C_2 (0x04) +#define GPIO_PODR_FECI2C_1 (0x02) +#define GPIO_PODR_FECI2C_0 (0x01) /* Bit definitions and macros for GPIO_PODR_UART */ -#define GPIO_PODR_UART_7 (0x80) -#define GPIO_PODR_UART_6 (0x40) -#define GPIO_PODR_UART_5 (0x20) -#define GPIO_PODR_UART_4 (0x10) -#define GPIO_PODR_UART_3 (0x08) -#define GPIO_PODR_UART_2 (0x04) -#define GPIO_PODR_UART_1 (0x02) -#define GPIO_PODR_UART_0 (0x01) +#define GPIO_PODR_UART_7 (0x80) +#define GPIO_PODR_UART_6 (0x40) +#define GPIO_PODR_UART_5 (0x20) +#define GPIO_PODR_UART_4 (0x10) +#define GPIO_PODR_UART_3 (0x08) +#define GPIO_PODR_UART_2 (0x04) +#define GPIO_PODR_UART_1 (0x02) +#define GPIO_PODR_UART_0 (0x01) /* Bit definitions and macros for GPIO_PODR_QSPI */ -#define GPIO_PODR_QSPI_5 (0x20) -#define GPIO_PODR_QSPI_4 (0x10) -#define GPIO_PODR_QSPI_3 (0x08) -#define GPIO_PODR_QSPI_2 (0x04) -#define GPIO_PODR_QSPI_1 (0x02) -#define GPIO_PODR_QSPI_0 (0x01) +#define GPIO_PODR_QSPI_5 (0x20) +#define GPIO_PODR_QSPI_4 (0x10) +#define GPIO_PODR_QSPI_3 (0x08) +#define GPIO_PODR_QSPI_2 (0x04) +#define GPIO_PODR_QSPI_1 (0x02) +#define GPIO_PODR_QSPI_0 (0x01) /* Bit definitions and macros for GPIO_PODR_TIMER */ -#define GPIO_PODR_TIMER_3 (0x08) -#define GPIO_PODR_TIMER_2 (0x04) -#define GPIO_PODR_TIMER_1 (0x02) -#define GPIO_PODR_TIMER_0 (0x01) +#define GPIO_PODR_TIMER_3 (0x08) +#define GPIO_PODR_TIMER_2 (0x04) +#define GPIO_PODR_TIMER_1 (0x02) +#define GPIO_PODR_TIMER_0 (0x01) /* Bit definitions and macros for GPIO_PODR_LCDDATAH */ -#define GPIO_PODR_LCDDATAH_1 (0x02) -#define GPIO_PODR_LCDDATAH_0 (0x01) +#define GPIO_PODR_LCDDATAH_1 (0x02) +#define GPIO_PODR_LCDDATAH_0 (0x01) /* Bit definitions and macros for GPIO_PODR_LCDDATAM */ -#define GPIO_PODR_LCDDATAM_7 (0x80) -#define GPIO_PODR_LCDDATAM_6 (0x40) -#define GPIO_PODR_LCDDATAM_5 (0x20) -#define GPIO_PODR_LCDDATAM_4 (0x10) -#define GPIO_PODR_LCDDATAM_3 (0x08) -#define GPIO_PODR_LCDDATAM_2 (0x04) -#define GPIO_PODR_LCDDATAM_1 (0x02) -#define GPIO_PODR_LCDDATAM_0 (0x01) +#define GPIO_PODR_LCDDATAM_7 (0x80) +#define GPIO_PODR_LCDDATAM_6 (0x40) +#define GPIO_PODR_LCDDATAM_5 (0x20) +#define GPIO_PODR_LCDDATAM_4 (0x10) +#define GPIO_PODR_LCDDATAM_3 (0x08) +#define GPIO_PODR_LCDDATAM_2 (0x04) +#define GPIO_PODR_LCDDATAM_1 (0x02) +#define GPIO_PODR_LCDDATAM_0 (0x01) /* Bit definitions and macros for GPIO_PODR_LCDDATAL */ -#define GPIO_PODR_LCDDATAL_7 (0x80) -#define GPIO_PODR_LCDDATAL_6 (0x40) -#define GPIO_PODR_LCDDATAL_5 (0x20) -#define GPIO_PODR_LCDDATAL_4 (0x10) -#define GPIO_PODR_LCDDATAL_3 (0x08) -#define GPIO_PODR_LCDDATAL_2 (0x04) -#define GPIO_PODR_LCDDATAL_1 (0x02) -#define GPIO_PODR_LCDDATAL_0 (0x01) +#define GPIO_PODR_LCDDATAL_7 (0x80) +#define GPIO_PODR_LCDDATAL_6 (0x40) +#define GPIO_PODR_LCDDATAL_5 (0x20) +#define GPIO_PODR_LCDDATAL_4 (0x10) +#define GPIO_PODR_LCDDATAL_3 (0x08) +#define GPIO_PODR_LCDDATAL_2 (0x04) +#define GPIO_PODR_LCDDATAL_1 (0x02) +#define GPIO_PODR_LCDDATAL_0 (0x01) /* Bit definitions and macros for GPIO_PODR_LCDCTLH */ -#define GPIO_PODR_LCDCTLH_0 (0x01) +#define GPIO_PODR_LCDCTLH_0 (0x01) /* Bit definitions and macros for GPIO_PODR_LCDCTLL */ -#define GPIO_PODR_LCDCTLL_7 (0x80) -#define GPIO_PODR_LCDCTLL_6 (0x40) -#define GPIO_PODR_LCDCTLL_5 (0x20) -#define GPIO_PODR_LCDCTLL_4 (0x10) -#define GPIO_PODR_LCDCTLL_3 (0x08) -#define GPIO_PODR_LCDCTLL_2 (0x04) -#define GPIO_PODR_LCDCTLL_1 (0x02) -#define GPIO_PODR_LCDCTLL_0 (0x01) +#define GPIO_PODR_LCDCTLL_7 (0x80) +#define GPIO_PODR_LCDCTLL_6 (0x40) +#define GPIO_PODR_LCDCTLL_5 (0x20) +#define GPIO_PODR_LCDCTLL_4 (0x10) +#define GPIO_PODR_LCDCTLL_3 (0x08) +#define GPIO_PODR_LCDCTLL_2 (0x04) +#define GPIO_PODR_LCDCTLL_1 (0x02) +#define GPIO_PODR_LCDCTLL_0 (0x01) /* Bit definitions and macros for GPIO_PDDR_FECH */ -#define GPIO_PDDR_FECH_L7 (0x80) -#define GPIO_PDDR_FECH_L6 (0x40) -#define GPIO_PDDR_FECH_L5 (0x20) -#define GPIO_PDDR_FECH_L4 (0x10) -#define GPIO_PDDR_FECH_L3 (0x08) -#define GPIO_PDDR_FECH_L2 (0x04) -#define GPIO_PDDR_FECH_L1 (0x02) -#define GPIO_PDDR_FECH_L0 (0x01) +#define GPIO_PDDR_FECH_L7 (0x80) +#define GPIO_PDDR_FECH_L6 (0x40) +#define GPIO_PDDR_FECH_L5 (0x20) +#define GPIO_PDDR_FECH_L4 (0x10) +#define GPIO_PDDR_FECH_L3 (0x08) +#define GPIO_PDDR_FECH_L2 (0x04) +#define GPIO_PDDR_FECH_L1 (0x02) +#define GPIO_PDDR_FECH_L0 (0x01) /* Bit definitions and macros for GPIO_PDDR_SSI */ -#define GPIO_PDDR_SSI_4 (0x10) -#define GPIO_PDDR_SSI_3 (0x08) -#define GPIO_PDDR_SSI_2 (0x04) -#define GPIO_PDDR_SSI_1 (0x02) -#define GPIO_PDDR_SSI_0 (0x01) +#define GPIO_PDDR_SSI_4 (0x10) +#define GPIO_PDDR_SSI_3 (0x08) +#define GPIO_PDDR_SSI_2 (0x04) +#define GPIO_PDDR_SSI_1 (0x02) +#define GPIO_PDDR_SSI_0 (0x01) /* Bit definitions and macros for GPIO_PDDR_BUSCTL */ -#define GPIO_PDDR_BUSCTL_3 (0x08) -#define GPIO_PDDR_BUSCTL_2 (0x04) -#define GPIO_PDDR_BUSCTL_1 (0x02) -#define GPIO_PDDR_BUSCTL_0 (0x01) +#define GPIO_PDDR_BUSCTL_3 (0x08) +#define GPIO_PDDR_BUSCTL_2 (0x04) +#define GPIO_PDDR_BUSCTL_1 (0x02) +#define GPIO_PDDR_BUSCTL_0 (0x01) /* Bit definitions and macros for GPIO_PDDR_BE */ -#define GPIO_PDDR_BE_3 (0x08) -#define GPIO_PDDR_BE_2 (0x04) -#define GPIO_PDDR_BE_1 (0x02) -#define GPIO_PDDR_BE_0 (0x01) +#define GPIO_PDDR_BE_3 (0x08) +#define GPIO_PDDR_BE_2 (0x04) +#define GPIO_PDDR_BE_1 (0x02) +#define GPIO_PDDR_BE_0 (0x01) /* Bit definitions and macros for GPIO_PDDR_CS */ -#define GPIO_PDDR_CS_1 (0x02) -#define GPIO_PDDR_CS_2 (0x04) -#define GPIO_PDDR_CS_3 (0x08) -#define GPIO_PDDR_CS_4 (0x10) -#define GPIO_PDDR_CS_5 (0x20) +#define GPIO_PDDR_CS_1 (0x02) +#define GPIO_PDDR_CS_2 (0x04) +#define GPIO_PDDR_CS_3 (0x08) +#define GPIO_PDDR_CS_4 (0x10) +#define GPIO_PDDR_CS_5 (0x20) /* Bit definitions and macros for GPIO_PDDR_PWM */ -#define GPIO_PDDR_PWM_2 (0x04) -#define GPIO_PDDR_PWM_3 (0x08) -#define GPIO_PDDR_PWM_4 (0x10) -#define GPIO_PDDR_PWM_5 (0x20) +#define GPIO_PDDR_PWM_2 (0x04) +#define GPIO_PDDR_PWM_3 (0x08) +#define GPIO_PDDR_PWM_4 (0x10) +#define GPIO_PDDR_PWM_5 (0x20) /* Bit definitions and macros for GPIO_PDDR_FECI2C */ -#define GPIO_PDDR_FECI2C_0 (0x01) -#define GPIO_PDDR_FECI2C_1 (0x02) -#define GPIO_PDDR_FECI2C_2 (0x04) -#define GPIO_PDDR_FECI2C_3 (0x08) +#define GPIO_PDDR_FECI2C_0 (0x01) +#define GPIO_PDDR_FECI2C_1 (0x02) +#define GPIO_PDDR_FECI2C_2 (0x04) +#define GPIO_PDDR_FECI2C_3 (0x08) /* Bit definitions and macros for GPIO_PDDR_UART */ -#define GPIO_PDDR_UART_0 (0x01) -#define GPIO_PDDR_UART_1 (0x02) -#define GPIO_PDDR_UART_2 (0x04) -#define GPIO_PDDR_UART_3 (0x08) -#define GPIO_PDDR_UART_4 (0x10) -#define GPIO_PDDR_UART_5 (0x20) -#define GPIO_PDDR_UART_6 (0x40) -#define GPIO_PDDR_UART_7 (0x80) +#define GPIO_PDDR_UART_0 (0x01) +#define GPIO_PDDR_UART_1 (0x02) +#define GPIO_PDDR_UART_2 (0x04) +#define GPIO_PDDR_UART_3 (0x08) +#define GPIO_PDDR_UART_4 (0x10) +#define GPIO_PDDR_UART_5 (0x20) +#define GPIO_PDDR_UART_6 (0x40) +#define GPIO_PDDR_UART_7 (0x80) /* Bit definitions and macros for GPIO_PDDR_QSPI */ -#define GPIO_PDDR_QSPI_0 (0x01) -#define GPIO_PDDR_QSPI_1 (0x02) -#define GPIO_PDDR_QSPI_2 (0x04) -#define GPIO_PDDR_QSPI_3 (0x08) -#define GPIO_PDDR_QSPI_4 (0x10) -#define GPIO_PDDR_QSPI_5 (0x20) +#define GPIO_PDDR_QSPI_0 (0x01) +#define GPIO_PDDR_QSPI_1 (0x02) +#define GPIO_PDDR_QSPI_2 (0x04) +#define GPIO_PDDR_QSPI_3 (0x08) +#define GPIO_PDDR_QSPI_4 (0x10) +#define GPIO_PDDR_QSPI_5 (0x20) /* Bit definitions and macros for GPIO_PDDR_TIMER */ -#define GPIO_PDDR_TIMER_0 (0x01) -#define GPIO_PDDR_TIMER_1 (0x02) -#define GPIO_PDDR_TIMER_2 (0x04) -#define GPIO_PDDR_TIMER_3 (0x08) +#define GPIO_PDDR_TIMER_0 (0x01) +#define GPIO_PDDR_TIMER_1 (0x02) +#define GPIO_PDDR_TIMER_2 (0x04) +#define GPIO_PDDR_TIMER_3 (0x08) /* Bit definitions and macros for GPIO_PDDR_LCDDATAH */ -#define GPIO_PDDR_LCDDATAH_0 (0x01) -#define GPIO_PDDR_LCDDATAH_1 (0x02) +#define GPIO_PDDR_LCDDATAH_0 (0x01) +#define GPIO_PDDR_LCDDATAH_1 (0x02) /* Bit definitions and macros for GPIO_PDDR_LCDDATAM */ -#define GPIO_PDDR_LCDDATAM_0 (0x01) -#define GPIO_PDDR_LCDDATAM_1 (0x02) -#define GPIO_PDDR_LCDDATAM_2 (0x04) -#define GPIO_PDDR_LCDDATAM_3 (0x08) -#define GPIO_PDDR_LCDDATAM_4 (0x10) -#define GPIO_PDDR_LCDDATAM_5 (0x20) -#define GPIO_PDDR_LCDDATAM_6 (0x40) -#define GPIO_PDDR_LCDDATAM_7 (0x80) +#define GPIO_PDDR_LCDDATAM_0 (0x01) +#define GPIO_PDDR_LCDDATAM_1 (0x02) +#define GPIO_PDDR_LCDDATAM_2 (0x04) +#define GPIO_PDDR_LCDDATAM_3 (0x08) +#define GPIO_PDDR_LCDDATAM_4 (0x10) +#define GPIO_PDDR_LCDDATAM_5 (0x20) +#define GPIO_PDDR_LCDDATAM_6 (0x40) +#define GPIO_PDDR_LCDDATAM_7 (0x80) /* Bit definitions and macros for GPIO_PDDR_LCDDATAL */ -#define GPIO_PDDR_LCDDATAL_0 (0x01) -#define GPIO_PDDR_LCDDATAL_1 (0x02) -#define GPIO_PDDR_LCDDATAL_2 (0x04) -#define GPIO_PDDR_LCDDATAL_3 (0x08) -#define GPIO_PDDR_LCDDATAL_4 (0x10) -#define GPIO_PDDR_LCDDATAL_5 (0x20) -#define GPIO_PDDR_LCDDATAL_6 (0x40) -#define GPIO_PDDR_LCDDATAL_7 (0x80) +#define GPIO_PDDR_LCDDATAL_0 (0x01) +#define GPIO_PDDR_LCDDATAL_1 (0x02) +#define GPIO_PDDR_LCDDATAL_2 (0x04) +#define GPIO_PDDR_LCDDATAL_3 (0x08) +#define GPIO_PDDR_LCDDATAL_4 (0x10) +#define GPIO_PDDR_LCDDATAL_5 (0x20) +#define GPIO_PDDR_LCDDATAL_6 (0x40) +#define GPIO_PDDR_LCDDATAL_7 (0x80) /* Bit definitions and macros for GPIO_PDDR_LCDCTLH */ -#define GPIO_PDDR_LCDCTLH_0 (0x01) +#define GPIO_PDDR_LCDCTLH_0 (0x01) /* Bit definitions and macros for GPIO_PDDR_LCDCTLL */ -#define GPIO_PDDR_LCDCTLL_0 (0x01) -#define GPIO_PDDR_LCDCTLL_1 (0x02) -#define GPIO_PDDR_LCDCTLL_2 (0x04) -#define GPIO_PDDR_LCDCTLL_3 (0x08) -#define GPIO_PDDR_LCDCTLL_4 (0x10) -#define GPIO_PDDR_LCDCTLL_5 (0x20) -#define GPIO_PDDR_LCDCTLL_6 (0x40) -#define GPIO_PDDR_LCDCTLL_7 (0x80) +#define GPIO_PDDR_LCDCTLL_0 (0x01) +#define GPIO_PDDR_LCDCTLL_1 (0x02) +#define GPIO_PDDR_LCDCTLL_2 (0x04) +#define GPIO_PDDR_LCDCTLL_3 (0x08) +#define GPIO_PDDR_LCDCTLL_4 (0x10) +#define GPIO_PDDR_LCDCTLL_5 (0x20) +#define GPIO_PDDR_LCDCTLL_6 (0x40) +#define GPIO_PDDR_LCDCTLL_7 (0x80) /* Bit definitions and macros for GPIO_PPDSDR_FECH */ -#define GPIO_PPDSDR_FECH_L0 (0x01) -#define GPIO_PPDSDR_FECH_L1 (0x02) -#define GPIO_PPDSDR_FECH_L2 (0x04) -#define GPIO_PPDSDR_FECH_L3 (0x08) -#define GPIO_PPDSDR_FECH_L4 (0x10) -#define GPIO_PPDSDR_FECH_L5 (0x20) -#define GPIO_PPDSDR_FECH_L6 (0x40) -#define GPIO_PPDSDR_FECH_L7 (0x80) +#define GPIO_PPDSDR_FECH_L0 (0x01) +#define GPIO_PPDSDR_FECH_L1 (0x02) +#define GPIO_PPDSDR_FECH_L2 (0x04) +#define GPIO_PPDSDR_FECH_L3 (0x08) +#define GPIO_PPDSDR_FECH_L4 (0x10) +#define GPIO_PPDSDR_FECH_L5 (0x20) +#define GPIO_PPDSDR_FECH_L6 (0x40) +#define GPIO_PPDSDR_FECH_L7 (0x80) /* Bit definitions and macros for GPIO_PPDSDR_SSI */ -#define GPIO_PPDSDR_SSI_0 (0x01) -#define GPIO_PPDSDR_SSI_1 (0x02) -#define GPIO_PPDSDR_SSI_2 (0x04) -#define GPIO_PPDSDR_SSI_3 (0x08) -#define GPIO_PPDSDR_SSI_4 (0x10) +#define GPIO_PPDSDR_SSI_0 (0x01) +#define GPIO_PPDSDR_SSI_1 (0x02) +#define GPIO_PPDSDR_SSI_2 (0x04) +#define GPIO_PPDSDR_SSI_3 (0x08) +#define GPIO_PPDSDR_SSI_4 (0x10) /* Bit definitions and macros for GPIO_PPDSDR_BUSCTL */ -#define GPIO_PPDSDR_BUSCTL_0 (0x01) -#define GPIO_PPDSDR_BUSCTL_1 (0x02) -#define GPIO_PPDSDR_BUSCTL_2 (0x04) -#define GPIO_PPDSDR_BUSCTL_3 (0x08) +#define GPIO_PPDSDR_BUSCTL_0 (0x01) +#define GPIO_PPDSDR_BUSCTL_1 (0x02) +#define GPIO_PPDSDR_BUSCTL_2 (0x04) +#define GPIO_PPDSDR_BUSCTL_3 (0x08) /* Bit definitions and macros for GPIO_PPDSDR_BE */ -#define GPIO_PPDSDR_BE_0 (0x01) -#define GPIO_PPDSDR_BE_1 (0x02) -#define GPIO_PPDSDR_BE_2 (0x04) -#define GPIO_PPDSDR_BE_3 (0x08) +#define GPIO_PPDSDR_BE_0 (0x01) +#define GPIO_PPDSDR_BE_1 (0x02) +#define GPIO_PPDSDR_BE_2 (0x04) +#define GPIO_PPDSDR_BE_3 (0x08) /* Bit definitions and macros for GPIO_PPDSDR_CS */ -#define GPIO_PPDSDR_CS_1 (0x02) -#define GPIO_PPDSDR_CS_2 (0x04) -#define GPIO_PPDSDR_CS_3 (0x08) -#define GPIO_PPDSDR_CS_4 (0x10) -#define GPIO_PPDSDR_CS_5 (0x20) +#define GPIO_PPDSDR_CS_1 (0x02) +#define GPIO_PPDSDR_CS_2 (0x04) +#define GPIO_PPDSDR_CS_3 (0x08) +#define GPIO_PPDSDR_CS_4 (0x10) +#define GPIO_PPDSDR_CS_5 (0x20) /* Bit definitions and macros for GPIO_PPDSDR_PWM */ -#define GPIO_PPDSDR_PWM_2 (0x04) -#define GPIO_PPDSDR_PWM_3 (0x08) -#define GPIO_PPDSDR_PWM_4 (0x10) -#define GPIO_PPDSDR_PWM_5 (0x20) +#define GPIO_PPDSDR_PWM_2 (0x04) +#define GPIO_PPDSDR_PWM_3 (0x08) +#define GPIO_PPDSDR_PWM_4 (0x10) +#define GPIO_PPDSDR_PWM_5 (0x20) /* Bit definitions and macros for GPIO_PPDSDR_FECI2C */ -#define GPIO_PPDSDR_FECI2C_0 (0x01) -#define GPIO_PPDSDR_FECI2C_1 (0x02) -#define GPIO_PPDSDR_FECI2C_2 (0x04) -#define GPIO_PPDSDR_FECI2C_3 (0x08) +#define GPIO_PPDSDR_FECI2C_0 (0x01) +#define GPIO_PPDSDR_FECI2C_1 (0x02) +#define GPIO_PPDSDR_FECI2C_2 (0x04) +#define GPIO_PPDSDR_FECI2C_3 (0x08) /* Bit definitions and macros for GPIO_PPDSDR_UART */ -#define GPIO_PPDSDR_UART_0 (0x01) -#define GPIO_PPDSDR_UART_1 (0x02) -#define GPIO_PPDSDR_UART_2 (0x04) -#define GPIO_PPDSDR_UART_3 (0x08) -#define GPIO_PPDSDR_UART_4 (0x10) -#define GPIO_PPDSDR_UART_5 (0x20) -#define GPIO_PPDSDR_UART_6 (0x40) -#define GPIO_PPDSDR_UART_7 (0x80) +#define GPIO_PPDSDR_UART_0 (0x01) +#define GPIO_PPDSDR_UART_1 (0x02) +#define GPIO_PPDSDR_UART_2 (0x04) +#define GPIO_PPDSDR_UART_3 (0x08) +#define GPIO_PPDSDR_UART_4 (0x10) +#define GPIO_PPDSDR_UART_5 (0x20) +#define GPIO_PPDSDR_UART_6 (0x40) +#define GPIO_PPDSDR_UART_7 (0x80) /* Bit definitions and macros for GPIO_PPDSDR_QSPI */ -#define GPIO_PPDSDR_QSPI_0 (0x01) -#define GPIO_PPDSDR_QSPI_1 (0x02) -#define GPIO_PPDSDR_QSPI_2 (0x04) -#define GPIO_PPDSDR_QSPI_3 (0x08) -#define GPIO_PPDSDR_QSPI_4 (0x10) -#define GPIO_PPDSDR_QSPI_5 (0x20) +#define GPIO_PPDSDR_QSPI_0 (0x01) +#define GPIO_PPDSDR_QSPI_1 (0x02) +#define GPIO_PPDSDR_QSPI_2 (0x04) +#define GPIO_PPDSDR_QSPI_3 (0x08) +#define GPIO_PPDSDR_QSPI_4 (0x10) +#define GPIO_PPDSDR_QSPI_5 (0x20) /* Bit definitions and macros for GPIO_PPDSDR_TIMER */ -#define GPIO_PPDSDR_TIMER_0 (0x01) -#define GPIO_PPDSDR_TIMER_1 (0x02) -#define GPIO_PPDSDR_TIMER_2 (0x04) -#define GPIO_PPDSDR_TIMER_3 (0x08) +#define GPIO_PPDSDR_TIMER_0 (0x01) +#define GPIO_PPDSDR_TIMER_1 (0x02) +#define GPIO_PPDSDR_TIMER_2 (0x04) +#define GPIO_PPDSDR_TIMER_3 (0x08) /* Bit definitions and macros for GPIO_PPDSDR_LCDDATAH */ -#define GPIO_PPDSDR_LCDDATAH_0 (0x01) -#define GPIO_PPDSDR_LCDDATAH_1 (0x02) +#define GPIO_PPDSDR_LCDDATAH_0 (0x01) +#define GPIO_PPDSDR_LCDDATAH_1 (0x02) /* Bit definitions and macros for GPIO_PPDSDR_LCDDATAM */ -#define GPIO_PPDSDR_LCDDATAM_0 (0x01) -#define GPIO_PPDSDR_LCDDATAM_1 (0x02) -#define GPIO_PPDSDR_LCDDATAM_2 (0x04) -#define GPIO_PPDSDR_LCDDATAM_3 (0x08) -#define GPIO_PPDSDR_LCDDATAM_4 (0x10) -#define GPIO_PPDSDR_LCDDATAM_5 (0x20) -#define GPIO_PPDSDR_LCDDATAM_6 (0x40) -#define GPIO_PPDSDR_LCDDATAM_7 (0x80) +#define GPIO_PPDSDR_LCDDATAM_0 (0x01) +#define GPIO_PPDSDR_LCDDATAM_1 (0x02) +#define GPIO_PPDSDR_LCDDATAM_2 (0x04) +#define GPIO_PPDSDR_LCDDATAM_3 (0x08) +#define GPIO_PPDSDR_LCDDATAM_4 (0x10) +#define GPIO_PPDSDR_LCDDATAM_5 (0x20) +#define GPIO_PPDSDR_LCDDATAM_6 (0x40) +#define GPIO_PPDSDR_LCDDATAM_7 (0x80) /* Bit definitions and macros for GPIO_PPDSDR_LCDDATAL */ -#define GPIO_PPDSDR_LCDDATAL_0 (0x01) -#define GPIO_PPDSDR_LCDDATAL_1 (0x02) -#define GPIO_PPDSDR_LCDDATAL_2 (0x04) -#define GPIO_PPDSDR_LCDDATAL_3 (0x08) -#define GPIO_PPDSDR_LCDDATAL_4 (0x10) -#define GPIO_PPDSDR_LCDDATAL_5 (0x20) -#define GPIO_PPDSDR_LCDDATAL_6 (0x40) -#define GPIO_PPDSDR_LCDDATAL_7 (0x80) +#define GPIO_PPDSDR_LCDDATAL_0 (0x01) +#define GPIO_PPDSDR_LCDDATAL_1 (0x02) +#define GPIO_PPDSDR_LCDDATAL_2 (0x04) +#define GPIO_PPDSDR_LCDDATAL_3 (0x08) +#define GPIO_PPDSDR_LCDDATAL_4 (0x10) +#define GPIO_PPDSDR_LCDDATAL_5 (0x20) +#define GPIO_PPDSDR_LCDDATAL_6 (0x40) +#define GPIO_PPDSDR_LCDDATAL_7 (0x80) /* Bit definitions and macros for GPIO_PPDSDR_LCDCTLH */ -#define GPIO_PPDSDR_LCDCTLH_0 (0x01) +#define GPIO_PPDSDR_LCDCTLH_0 (0x01) /* Bit definitions and macros for GPIO_PPDSDR_LCDCTLL */ -#define GPIO_PPDSDR_LCDCTLL_0 (0x01) -#define GPIO_PPDSDR_LCDCTLL_1 (0x02) -#define GPIO_PPDSDR_LCDCTLL_2 (0x04) -#define GPIO_PPDSDR_LCDCTLL_3 (0x08) -#define GPIO_PPDSDR_LCDCTLL_4 (0x10) -#define GPIO_PPDSDR_LCDCTLL_5 (0x20) -#define GPIO_PPDSDR_LCDCTLL_6 (0x40) -#define GPIO_PPDSDR_LCDCTLL_7 (0x80) +#define GPIO_PPDSDR_LCDCTLL_0 (0x01) +#define GPIO_PPDSDR_LCDCTLL_1 (0x02) +#define GPIO_PPDSDR_LCDCTLL_2 (0x04) +#define GPIO_PPDSDR_LCDCTLL_3 (0x08) +#define GPIO_PPDSDR_LCDCTLL_4 (0x10) +#define GPIO_PPDSDR_LCDCTLL_5 (0x20) +#define GPIO_PPDSDR_LCDCTLL_6 (0x40) +#define GPIO_PPDSDR_LCDCTLL_7 (0x80) /* Bit definitions and macros for GPIO_PCLRR_FECH */ -#define GPIO_PCLRR_FECH_L0 (0x01) -#define GPIO_PCLRR_FECH_L1 (0x02) -#define GPIO_PCLRR_FECH_L2 (0x04) -#define GPIO_PCLRR_FECH_L3 (0x08) -#define GPIO_PCLRR_FECH_L4 (0x10) -#define GPIO_PCLRR_FECH_L5 (0x20) -#define GPIO_PCLRR_FECH_L6 (0x40) -#define GPIO_PCLRR_FECH_L7 (0x80) +#define GPIO_PCLRR_FECH_L0 (0x01) +#define GPIO_PCLRR_FECH_L1 (0x02) +#define GPIO_PCLRR_FECH_L2 (0x04) +#define GPIO_PCLRR_FECH_L3 (0x08) +#define GPIO_PCLRR_FECH_L4 (0x10) +#define GPIO_PCLRR_FECH_L5 (0x20) +#define GPIO_PCLRR_FECH_L6 (0x40) +#define GPIO_PCLRR_FECH_L7 (0x80) /* Bit definitions and macros for GPIO_PCLRR_SSI */ -#define GPIO_PCLRR_SSI_0 (0x01) -#define GPIO_PCLRR_SSI_1 (0x02) -#define GPIO_PCLRR_SSI_2 (0x04) -#define GPIO_PCLRR_SSI_3 (0x08) -#define GPIO_PCLRR_SSI_4 (0x10) +#define GPIO_PCLRR_SSI_0 (0x01) +#define GPIO_PCLRR_SSI_1 (0x02) +#define GPIO_PCLRR_SSI_2 (0x04) +#define GPIO_PCLRR_SSI_3 (0x08) +#define GPIO_PCLRR_SSI_4 (0x10) /* Bit definitions and macros for GPIO_PCLRR_BUSCTL */ -#define GPIO_PCLRR_BUSCTL_L0 (0x01) -#define GPIO_PCLRR_BUSCTL_L1 (0x02) -#define GPIO_PCLRR_BUSCTL_L2 (0x04) -#define GPIO_PCLRR_BUSCTL_L3 (0x08) +#define GPIO_PCLRR_BUSCTL_L0 (0x01) +#define GPIO_PCLRR_BUSCTL_L1 (0x02) +#define GPIO_PCLRR_BUSCTL_L2 (0x04) +#define GPIO_PCLRR_BUSCTL_L3 (0x08) /* Bit definitions and macros for GPIO_PCLRR_BE */ -#define GPIO_PCLRR_BE_0 (0x01) -#define GPIO_PCLRR_BE_1 (0x02) -#define GPIO_PCLRR_BE_2 (0x04) -#define GPIO_PCLRR_BE_3 (0x08) +#define GPIO_PCLRR_BE_0 (0x01) +#define GPIO_PCLRR_BE_1 (0x02) +#define GPIO_PCLRR_BE_2 (0x04) +#define GPIO_PCLRR_BE_3 (0x08) /* Bit definitions and macros for GPIO_PCLRR_CS */ -#define GPIO_PCLRR_CS_1 (0x02) -#define GPIO_PCLRR_CS_2 (0x04) -#define GPIO_PCLRR_CS_3 (0x08) -#define GPIO_PCLRR_CS_4 (0x10) -#define GPIO_PCLRR_CS_5 (0x20) +#define GPIO_PCLRR_CS_1 (0x02) +#define GPIO_PCLRR_CS_2 (0x04) +#define GPIO_PCLRR_CS_3 (0x08) +#define GPIO_PCLRR_CS_4 (0x10) +#define GPIO_PCLRR_CS_5 (0x20) /* Bit definitions and macros for GPIO_PCLRR_PWM */ -#define GPIO_PCLRR_PWM_2 (0x04) -#define GPIO_PCLRR_PWM_3 (0x08) -#define GPIO_PCLRR_PWM_4 (0x10) -#define GPIO_PCLRR_PWM_5 (0x20) +#define GPIO_PCLRR_PWM_2 (0x04) +#define GPIO_PCLRR_PWM_3 (0x08) +#define GPIO_PCLRR_PWM_4 (0x10) +#define GPIO_PCLRR_PWM_5 (0x20) /* Bit definitions and macros for GPIO_PCLRR_FECI2C */ -#define GPIO_PCLRR_FECI2C_0 (0x01) -#define GPIO_PCLRR_FECI2C_1 (0x02) -#define GPIO_PCLRR_FECI2C_2 (0x04) -#define GPIO_PCLRR_FECI2C_3 (0x08) +#define GPIO_PCLRR_FECI2C_0 (0x01) +#define GPIO_PCLRR_FECI2C_1 (0x02) +#define GPIO_PCLRR_FECI2C_2 (0x04) +#define GPIO_PCLRR_FECI2C_3 (0x08) /* Bit definitions and macros for GPIO_PCLRR_UART */ -#define GPIO_PCLRR_UART0 (0x01) -#define GPIO_PCLRR_UART1 (0x02) -#define GPIO_PCLRR_UART2 (0x04) -#define GPIO_PCLRR_UART3 (0x08) -#define GPIO_PCLRR_UART4 (0x10) -#define GPIO_PCLRR_UART5 (0x20) -#define GPIO_PCLRR_UART6 (0x40) -#define GPIO_PCLRR_UART7 (0x80) +#define GPIO_PCLRR_UART0 (0x01) +#define GPIO_PCLRR_UART1 (0x02) +#define GPIO_PCLRR_UART2 (0x04) +#define GPIO_PCLRR_UART3 (0x08) +#define GPIO_PCLRR_UART4 (0x10) +#define GPIO_PCLRR_UART5 (0x20) +#define GPIO_PCLRR_UART6 (0x40) +#define GPIO_PCLRR_UART7 (0x80) /* Bit definitions and macros for GPIO_PCLRR_QSPI */ -#define GPIO_PCLRR_QSPI0 (0x01) -#define GPIO_PCLRR_QSPI1 (0x02) -#define GPIO_PCLRR_QSPI2 (0x04) -#define GPIO_PCLRR_QSPI3 (0x08) -#define GPIO_PCLRR_QSPI4 (0x10) -#define GPIO_PCLRR_QSPI5 (0x20) +#define GPIO_PCLRR_QSPI0 (0x01) +#define GPIO_PCLRR_QSPI1 (0x02) +#define GPIO_PCLRR_QSPI2 (0x04) +#define GPIO_PCLRR_QSPI3 (0x08) +#define GPIO_PCLRR_QSPI4 (0x10) +#define GPIO_PCLRR_QSPI5 (0x20) /* Bit definitions and macros for GPIO_PCLRR_TIMER */ -#define GPIO_PCLRR_TIMER0 (0x01) -#define GPIO_PCLRR_TIMER1 (0x02) -#define GPIO_PCLRR_TIMER2 (0x04) -#define GPIO_PCLRR_TIMER3 (0x08) +#define GPIO_PCLRR_TIMER0 (0x01) +#define GPIO_PCLRR_TIMER1 (0x02) +#define GPIO_PCLRR_TIMER2 (0x04) +#define GPIO_PCLRR_TIMER3 (0x08) /* Bit definitions and macros for GPIO_PCLRR_LCDDATAH */ -#define GPIO_PCLRR_LCDDATAH0 (0x01) -#define GPIO_PCLRR_LCDDATAH1 (0x02) +#define GPIO_PCLRR_LCDDATAH0 (0x01) +#define GPIO_PCLRR_LCDDATAH1 (0x02) /* Bit definitions and macros for GPIO_PCLRR_LCDDATAM */ -#define GPIO_PCLRR_LCDDATAM0 (0x01) -#define GPIO_PCLRR_LCDDATAM1 (0x02) -#define GPIO_PCLRR_LCDDATAM2 (0x04) -#define GPIO_PCLRR_LCDDATAM3 (0x08) -#define GPIO_PCLRR_LCDDATAM4 (0x10) -#define GPIO_PCLRR_LCDDATAM5 (0x20) -#define GPIO_PCLRR_LCDDATAM6 (0x40) -#define GPIO_PCLRR_LCDDATAM7 (0x80) +#define GPIO_PCLRR_LCDDATAM0 (0x01) +#define GPIO_PCLRR_LCDDATAM1 (0x02) +#define GPIO_PCLRR_LCDDATAM2 (0x04) +#define GPIO_PCLRR_LCDDATAM3 (0x08) +#define GPIO_PCLRR_LCDDATAM4 (0x10) +#define GPIO_PCLRR_LCDDATAM5 (0x20) +#define GPIO_PCLRR_LCDDATAM6 (0x40) +#define GPIO_PCLRR_LCDDATAM7 (0x80) /* Bit definitions and macros for GPIO_PCLRR_LCDDATAL */ -#define GPIO_PCLRR_LCDDATAL0 (0x01) -#define GPIO_PCLRR_LCDDATAL1 (0x02) -#define GPIO_PCLRR_LCDDATAL2 (0x04) -#define GPIO_PCLRR_LCDDATAL3 (0x08) -#define GPIO_PCLRR_LCDDATAL4 (0x10) -#define GPIO_PCLRR_LCDDATAL5 (0x20) -#define GPIO_PCLRR_LCDDATAL6 (0x40) -#define GPIO_PCLRR_LCDDATAL7 (0x80) +#define GPIO_PCLRR_LCDDATAL0 (0x01) +#define GPIO_PCLRR_LCDDATAL1 (0x02) +#define GPIO_PCLRR_LCDDATAL2 (0x04) +#define GPIO_PCLRR_LCDDATAL3 (0x08) +#define GPIO_PCLRR_LCDDATAL4 (0x10) +#define GPIO_PCLRR_LCDDATAL5 (0x20) +#define GPIO_PCLRR_LCDDATAL6 (0x40) +#define GPIO_PCLRR_LCDDATAL7 (0x80) /* Bit definitions and macros for GPIO_PCLRR_LCDCTLH */ -#define GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01) +#define GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01) /* Bit definitions and macros for GPIO_PCLRR_LCDCTLL */ -#define GPIO_PCLRR_LCDCTLL0 (0x01) -#define GPIO_PCLRR_LCDCTLL1 (0x02) -#define GPIO_PCLRR_LCDCTLL2 (0x04) -#define GPIO_PCLRR_LCDCTLL3 (0x08) -#define GPIO_PCLRR_LCDCTLL4 (0x10) -#define GPIO_PCLRR_LCDCTLL5 (0x20) -#define GPIO_PCLRR_LCDCTLL6 (0x40) -#define GPIO_PCLRR_LCDCTLL7 (0x80) +#define GPIO_PCLRR_LCDCTLL0 (0x01) +#define GPIO_PCLRR_LCDCTLL1 (0x02) +#define GPIO_PCLRR_LCDCTLL2 (0x04) +#define GPIO_PCLRR_LCDCTLL3 (0x08) +#define GPIO_PCLRR_LCDCTLL4 (0x10) +#define GPIO_PCLRR_LCDCTLL5 (0x20) +#define GPIO_PCLRR_LCDCTLL6 (0x40) +#define GPIO_PCLRR_LCDCTLL7 (0x80) /* Bit definitions and macros for GPIO_PAR_FEC */ -#define GPIO_PAR_FEC_MII(x) (((x)&0x03)<<0) -#define GPIO_PAR_FEC_7W(x) (((x)&0x03)<<2) -#define GPIO_PAR_FEC_7W_GPIO (0x00) -#define GPIO_PAR_FEC_7W_URTS1 (0x04) -#define GPIO_PAR_FEC_7W_FEC (0x0C) -#define GPIO_PAR_FEC_MII_GPIO (0x00) -#define GPIO_PAR_FEC_MII_UART (0x01) -#define GPIO_PAR_FEC_MII_FEC (0x03) +#define GPIO_PAR_FEC_MII(x) (((x)&0x03)<<0) +#define GPIO_PAR_FEC_7W(x) (((x)&0x03)<<2) +#define GPIO_PAR_FEC_7W_GPIO (0x00) +#define GPIO_PAR_FEC_7W_URTS1 (0x04) +#define GPIO_PAR_FEC_7W_FEC (0x0C) +#define GPIO_PAR_FEC_MII_GPIO (0x00) +#define GPIO_PAR_FEC_MII_UART (0x01) +#define GPIO_PAR_FEC_MII_FEC (0x03) /* Bit definitions and macros for GPIO_PAR_PWM */ -#define GPIO_PAR_PWM1(x) (((x)&0x03)<<0) -#define GPIO_PAR_PWM3(x) (((x)&0x03)<<2) -#define GPIO_PAR_PWM5 (0x10) -#define GPIO_PAR_PWM7 (0x20) +#define GPIO_PAR_PWM1(x) (((x)&0x03)<<0) +#define GPIO_PAR_PWM3(x) (((x)&0x03)<<2) +#define GPIO_PAR_PWM5 (0x10) +#define GPIO_PAR_PWM7 (0x20) /* Bit definitions and macros for GPIO_PAR_BUSCTL */ -#define GPIO_PAR_BUSCTL_TS(x) (((x)&0x03)<<3) -#define GPIO_PAR_BUSCTL_RWB (0x20) -#define GPIO_PAR_BUSCTL_TA (0x40) -#define GPIO_PAR_BUSCTL_OE (0x80) -#define GPIO_PAR_BUSCTL_OE_GPIO (0x00) -#define GPIO_PAR_BUSCTL_OE_OE (0x80) -#define GPIO_PAR_BUSCTL_TA_GPIO (0x00) -#define GPIO_PAR_BUSCTL_TA_TA (0x40) -#define GPIO_PAR_BUSCTL_RWB_GPIO (0x00) -#define GPIO_PAR_BUSCTL_RWB_RWB (0x20) -#define GPIO_PAR_BUSCTL_TS_GPIO (0x00) -#define GPIO_PAR_BUSCTL_TS_DACK0 (0x10) -#define GPIO_PAR_BUSCTL_TS_TS (0x18) +#define GPIO_PAR_BUSCTL_TS(x) (((x)&0x03)<<3) +#define GPIO_PAR_BUSCTL_RWB (0x20) +#define GPIO_PAR_BUSCTL_TA (0x40) +#define GPIO_PAR_BUSCTL_OE (0x80) +#define GPIO_PAR_BUSCTL_OE_GPIO (0x00) +#define GPIO_PAR_BUSCTL_OE_OE (0x80) +#define GPIO_PAR_BUSCTL_TA_GPIO (0x00) +#define GPIO_PAR_BUSCTL_TA_TA (0x40) +#define GPIO_PAR_BUSCTL_RWB_GPIO (0x00) +#define GPIO_PAR_BUSCTL_RWB_RWB (0x20) +#define GPIO_PAR_BUSCTL_TS_GPIO (0x00) +#define GPIO_PAR_BUSCTL_TS_DACK0 (0x10) +#define GPIO_PAR_BUSCTL_TS_TS (0x18) /* Bit definitions and macros for GPIO_PAR_FECI2C */ -#define GPIO_PAR_FECI2C_SDA(x) (((x)&0x03)<<0) -#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x03)<<2) -#define GPIO_PAR_FECI2C_MDIO(x) (((x)&0x03)<<4) -#define GPIO_PAR_FECI2C_MDC(x) (((x)&0x03)<<6) -#define GPIO_PAR_FECI2C_MDC_GPIO (0x00) -#define GPIO_PAR_FECI2C_MDC_UTXD2 (0x40) -#define GPIO_PAR_FECI2C_MDC_SCL (0x80) -#define GPIO_PAR_FECI2C_MDC_EMDC (0xC0) -#define GPIO_PAR_FECI2C_MDIO_GPIO (0x00) -#define GPIO_PAR_FECI2C_MDIO_URXD2 (0x10) -#define GPIO_PAR_FECI2C_MDIO_SDA (0x20) -#define GPIO_PAR_FECI2C_MDIO_EMDIO (0x30) -#define GPIO_PAR_FECI2C_SCL_GPIO (0x00) -#define GPIO_PAR_FECI2C_SCL_UTXD2 (0x04) -#define GPIO_PAR_FECI2C_SCL_SCL (0x0C) -#define GPIO_PAR_FECI2C_SDA_GPIO (0x00) -#define GPIO_PAR_FECI2C_SDA_URXD2 (0x02) -#define GPIO_PAR_FECI2C_SDA_SDA (0x03) +#define GPIO_PAR_FECI2C_SDA(x) (((x)&0x03)<<0) +#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x03)<<2) +#define GPIO_PAR_FECI2C_MDIO(x) (((x)&0x03)<<4) +#define GPIO_PAR_FECI2C_MDC(x) (((x)&0x03)<<6) +#define GPIO_PAR_FECI2C_MDC_GPIO (0x00) +#define GPIO_PAR_FECI2C_MDC_UTXD2 (0x40) +#define GPIO_PAR_FECI2C_MDC_SCL (0x80) +#define GPIO_PAR_FECI2C_MDC_EMDC (0xC0) +#define GPIO_PAR_FECI2C_MDIO_GPIO (0x00) +#define GPIO_PAR_FECI2C_MDIO_URXD2 (0x10) +#define GPIO_PAR_FECI2C_MDIO_SDA (0x20) +#define GPIO_PAR_FECI2C_MDIO_EMDIO (0x30) +#define GPIO_PAR_FECI2C_SCL_GPIO (0x00) +#define GPIO_PAR_FECI2C_SCL_UTXD2 (0x04) +#define GPIO_PAR_FECI2C_SCL_SCL (0x0C) +#define GPIO_PAR_FECI2C_SDA_GPIO (0x00) +#define GPIO_PAR_FECI2C_SDA_URXD2 (0x02) +#define GPIO_PAR_FECI2C_SDA_SDA (0x03) /* Bit definitions and macros for GPIO_PAR_BE */ -#define GPIO_PAR_BE0 (0x01) -#define GPIO_PAR_BE1 (0x02) -#define GPIO_PAR_BE2 (0x04) -#define GPIO_PAR_BE3 (0x08) +#define GPIO_PAR_BE0 (0x01) +#define GPIO_PAR_BE1 (0x02) +#define GPIO_PAR_BE2 (0x04) +#define GPIO_PAR_BE3 (0x08) /* Bit definitions and macros for GPIO_PAR_CS */ -#define GPIO_PAR_CS1 (0x02) -#define GPIO_PAR_CS2 (0x04) -#define GPIO_PAR_CS3 (0x08) -#define GPIO_PAR_CS4 (0x10) -#define GPIO_PAR_CS5 (0x20) -#define GPIO_PAR_CS1_GPIO (0x00) -#define GPIO_PAR_CS1_SDCS1 (0x01) -#define GPIO_PAR_CS1_CS1 (0x03) +#define GPIO_PAR_CS1 (0x02) +#define GPIO_PAR_CS2 (0x04) +#define GPIO_PAR_CS3 (0x08) +#define GPIO_PAR_CS4 (0x10) +#define GPIO_PAR_CS5 (0x20) +#define GPIO_PAR_CS1_GPIO (0x00) +#define GPIO_PAR_CS1_SDCS1 (0x01) +#define GPIO_PAR_CS1_CS1 (0x03) /* Bit definitions and macros for GPIO_PAR_SSI */ -#define GPIO_PAR_SSI_MCLK (0x0080) -#define GPIO_PAR_SSI_TXD(x) (((x)&0x0003)<<8) -#define GPIO_PAR_SSI_RXD(x) (((x)&0x0003)<<10) -#define GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<12) -#define GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<14) +#define GPIO_PAR_SSI_MCLK (0x0080) +#define GPIO_PAR_SSI_TXD(x) (((x)&0x0003)<<8) +#define GPIO_PAR_SSI_RXD(x) (((x)&0x0003)<<10) +#define GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<12) +#define GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<14) /* Bit definitions and macros for GPIO_PAR_UART */ -#define GPIO_PAR_UART_TXD0 (0x0001) -#define GPIO_PAR_UART_RXD0 (0x0002) -#define GPIO_PAR_UART_RTS0 (0x0004) -#define GPIO_PAR_UART_CTS0 (0x0008) -#define GPIO_PAR_UART_TXD1(x) (((x)&0x0003)<<4) -#define GPIO_PAR_UART_RXD1(x) (((x)&0x0003)<<6) -#define GPIO_PAR_UART_RTS1(x) (((x)&0x0003)<<8) -#define GPIO_PAR_UART_CTS1(x) (((x)&0x0003)<<10) -#define GPIO_PAR_UART_CTS1_GPIO (0x0000) -#define GPIO_PAR_UART_CTS1_SSI_BCLK (0x0800) -#define GPIO_PAR_UART_CTS1_ULPI_D7 (0x0400) -#define GPIO_PAR_UART_CTS1_UCTS1 (0x0C00) -#define GPIO_PAR_UART_RTS1_GPIO (0x0000) -#define GPIO_PAR_UART_RTS1_SSI_FS (0x0200) -#define GPIO_PAR_UART_RTS1_ULPI_D6 (0x0100) -#define GPIO_PAR_UART_RTS1_URTS1 (0x0300) -#define GPIO_PAR_UART_RXD1_GPIO (0x0000) -#define GPIO_PAR_UART_RXD1_SSI_RXD (0x0080) -#define GPIO_PAR_UART_RXD1_ULPI_D5 (0x0040) -#define GPIO_PAR_UART_RXD1_URXD1 (0x00C0) -#define GPIO_PAR_UART_TXD1_GPIO (0x0000) -#define GPIO_PAR_UART_TXD1_SSI_TXD (0x0020) -#define GPIO_PAR_UART_TXD1_ULPI_D4 (0x0010) -#define GPIO_PAR_UART_TXD1_UTXD1 (0x0030) +#define GPIO_PAR_UART_TXD0 (0x0001) +#define GPIO_PAR_UART_RXD0 (0x0002) +#define GPIO_PAR_UART_RTS0 (0x0004) +#define GPIO_PAR_UART_CTS0 (0x0008) +#define GPIO_PAR_UART_TXD1(x) (((x)&0x0003)<<4) +#define GPIO_PAR_UART_RXD1(x) (((x)&0x0003)<<6) +#define GPIO_PAR_UART_RTS1(x) (((x)&0x0003)<<8) +#define GPIO_PAR_UART_CTS1(x) (((x)&0x0003)<<10) +#define GPIO_PAR_UART_CTS1_GPIO (0x0000) +#define GPIO_PAR_UART_CTS1_SSI_BCLK (0x0800) +#define GPIO_PAR_UART_CTS1_ULPI_D7 (0x0400) +#define GPIO_PAR_UART_CTS1_UCTS1 (0x0C00) +#define GPIO_PAR_UART_RTS1_GPIO (0x0000) +#define GPIO_PAR_UART_RTS1_SSI_FS (0x0200) +#define GPIO_PAR_UART_RTS1_ULPI_D6 (0x0100) +#define GPIO_PAR_UART_RTS1_URTS1 (0x0300) +#define GPIO_PAR_UART_RXD1_GPIO (0x0000) +#define GPIO_PAR_UART_RXD1_SSI_RXD (0x0080) +#define GPIO_PAR_UART_RXD1_ULPI_D5 (0x0040) +#define GPIO_PAR_UART_RXD1_URXD1 (0x00C0) +#define GPIO_PAR_UART_TXD1_GPIO (0x0000) +#define GPIO_PAR_UART_TXD1_SSI_TXD (0x0020) +#define GPIO_PAR_UART_TXD1_ULPI_D4 (0x0010) +#define GPIO_PAR_UART_TXD1_UTXD1 (0x0030) /* Bit definitions and macros for GPIO_PAR_QSPI */ -#define GPIO_PAR_QSPI_SCK(x) (((x)&0x0003)<<4) -#define GPIO_PAR_QSPI_DOUT(x) (((x)&0x0003)<<6) -#define GPIO_PAR_QSPI_DIN(x) (((x)&0x0003)<<8) -#define GPIO_PAR_QSPI_PCS0(x) (((x)&0x0003)<<10) -#define GPIO_PAR_QSPI_PCS1(x) (((x)&0x0003)<<12) -#define GPIO_PAR_QSPI_PCS2(x) (((x)&0x0003)<<14) +#define GPIO_PAR_QSPI_SCK(x) (((x)&0x0003)<<4) +#define GPIO_PAR_QSPI_DOUT(x) (((x)&0x0003)<<6) +#define GPIO_PAR_QSPI_DIN(x) (((x)&0x0003)<<8) +#define GPIO_PAR_QSPI_PCS0(x) (((x)&0x0003)<<10) +#define GPIO_PAR_QSPI_PCS1(x) (((x)&0x0003)<<12) +#define GPIO_PAR_QSPI_PCS2(x) (((x)&0x0003)<<14) /* Bit definitions and macros for GPIO_PAR_TIMER */ -#define GPIO_PAR_TIN0(x) (((x)&0x03)<<0) -#define GPIO_PAR_TIN1(x) (((x)&0x03)<<2) -#define GPIO_PAR_TIN2(x) (((x)&0x03)<<4) -#define GPIO_PAR_TIN3(x) (((x)&0x03)<<6) -#define GPIO_PAR_TIN3_GPIO (0x00) -#define GPIO_PAR_TIN3_TOUT3 (0x80) -#define GPIO_PAR_TIN3_URXD2 (0x40) -#define GPIO_PAR_TIN3_TIN3 (0xC0) -#define GPIO_PAR_TIN2_GPIO (0x00) -#define GPIO_PAR_TIN2_TOUT2 (0x20) -#define GPIO_PAR_TIN2_UTXD2 (0x10) -#define GPIO_PAR_TIN2_TIN2 (0x30) -#define GPIO_PAR_TIN1_GPIO (0x00) -#define GPIO_PAR_TIN1_TOUT1 (0x08) -#define GPIO_PAR_TIN1_DACK1 (0x04) -#define GPIO_PAR_TIN1_TIN1 (0x0C) -#define GPIO_PAR_TIN0_GPIO (0x00) -#define GPIO_PAR_TIN0_TOUT0 (0x02) -#define GPIO_PAR_TIN0_DREQ0 (0x01) -#define GPIO_PAR_TIN0_TIN0 (0x03) +#define GPIO_PAR_TIN0(x) (((x)&0x03)<<0) +#define GPIO_PAR_TIN1(x) (((x)&0x03)<<2) +#define GPIO_PAR_TIN2(x) (((x)&0x03)<<4) +#define GPIO_PAR_TIN3(x) (((x)&0x03)<<6) +#define GPIO_PAR_TIN3_GPIO (0x00) +#define GPIO_PAR_TIN3_TOUT3 (0x80) +#define GPIO_PAR_TIN3_URXD2 (0x40) +#define GPIO_PAR_TIN3_TIN3 (0xC0) +#define GPIO_PAR_TIN2_GPIO (0x00) +#define GPIO_PAR_TIN2_TOUT2 (0x20) +#define GPIO_PAR_TIN2_UTXD2 (0x10) +#define GPIO_PAR_TIN2_TIN2 (0x30) +#define GPIO_PAR_TIN1_GPIO (0x00) +#define GPIO_PAR_TIN1_TOUT1 (0x08) +#define GPIO_PAR_TIN1_DACK1 (0x04) +#define GPIO_PAR_TIN1_TIN1 (0x0C) +#define GPIO_PAR_TIN0_GPIO (0x00) +#define GPIO_PAR_TIN0_TOUT0 (0x02) +#define GPIO_PAR_TIN0_DREQ0 (0x01) +#define GPIO_PAR_TIN0_TIN0 (0x03) /* Bit definitions and macros for GPIO_PAR_LCDDATA */ -#define GPIO_PAR_LCDDATA_LD7_0(x) ((x)&0x03) -#define GPIO_PAR_LCDDATA_LD15_8(x) (((x)&0x03)<<2) -#define GPIO_PAR_LCDDATA_LD16(x) (((x)&0x03)<<4) -#define GPIO_PAR_LCDDATA_LD17(x) (((x)&0x03)<<6) +#define GPIO_PAR_LCDDATA_LD7_0(x) ((x)&0x03) +#define GPIO_PAR_LCDDATA_LD15_8(x) (((x)&0x03)<<2) +#define GPIO_PAR_LCDDATA_LD16(x) (((x)&0x03)<<4) +#define GPIO_PAR_LCDDATA_LD17(x) (((x)&0x03)<<6) /* Bit definitions and macros for GPIO_PAR_LCDCTL */ -#define GPIO_PAR_LCDCTL_CLS (0x0001) -#define GPIO_PAR_LCDCTL_PS (0x0002) -#define GPIO_PAR_LCDCTL_REV (0x0004) -#define GPIO_PAR_LCDCTL_SPL_SPR (0x0008) -#define GPIO_PAR_LCDCTL_CONTRAST (0x0010) -#define GPIO_PAR_LCDCTL_LSCLK (0x0020) -#define GPIO_PAR_LCDCTL_LP_HSYNC (0x0040) -#define GPIO_PAR_LCDCTL_FLM_VSYNC (0x0080) -#define GPIO_PAR_LCDCTL_ACD_OE (0x0100) +#define GPIO_PAR_LCDCTL_CLS (0x0001) +#define GPIO_PAR_LCDCTL_PS (0x0002) +#define GPIO_PAR_LCDCTL_REV (0x0004) +#define GPIO_PAR_LCDCTL_SPL_SPR (0x0008) +#define GPIO_PAR_LCDCTL_CONTRAST (0x0010) +#define GPIO_PAR_LCDCTL_LSCLK (0x0020) +#define GPIO_PAR_LCDCTL_LP_HSYNC (0x0040) +#define GPIO_PAR_LCDCTL_FLM_VSYNC (0x0080) +#define GPIO_PAR_LCDCTL_ACD_OE (0x0100) /* Bit definitions and macros for GPIO_PAR_IRQ */ -#define GPIO_PAR_IRQ1(x) (((x)&0x0003)<<4) -#define GPIO_PAR_IRQ2(x) (((x)&0x0003)<<6) -#define GPIO_PAR_IRQ4(x) (((x)&0x0003)<<8) -#define GPIO_PAR_IRQ5(x) (((x)&0x0003)<<10) -#define GPIO_PAR_IRQ6(x) (((x)&0x0003)<<12) +#define GPIO_PAR_IRQ1(x) (((x)&0x0003)<<4) +#define GPIO_PAR_IRQ2(x) (((x)&0x0003)<<6) +#define GPIO_PAR_IRQ4(x) (((x)&0x0003)<<8) +#define GPIO_PAR_IRQ5(x) (((x)&0x0003)<<10) +#define GPIO_PAR_IRQ6(x) (((x)&0x0003)<<12) /* Bit definitions and macros for GPIO_MSCR_FLEXBUS */ -#define GPIO_MSCR_FLEXBUS_ADDRCTL(x) ((x)&0x03) -#define GPIO_MSCR_FLEXBUS_DLOWER(x) (((x)&0x03)<<2) -#define GPIO_MSCR_FLEXBUS_DUPPER(x) (((x)&0x03)<<4) +#define GPIO_MSCR_FLEXBUS_ADDRCTL(x) ((x)&0x03) +#define GPIO_MSCR_FLEXBUS_DLOWER(x) (((x)&0x03)<<2) +#define GPIO_MSCR_FLEXBUS_DUPPER(x) (((x)&0x03)<<4) /* Bit definitions and macros for GPIO_MSCR_SDRAM */ -#define GPIO_MSCR_SDRAM_SDRAM(x) ((x)&0x03) -#define GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) -#define GPIO_MSCR_SDRAM_SDCLKB(x) (((x)&0x03)<<4) +#define GPIO_MSCR_SDRAM_SDRAM(x) ((x)&0x03) +#define GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) +#define GPIO_MSCR_SDRAM_SDCLKB(x) (((x)&0x03)<<4) /* Bit definitions and macros for GPIO_DSCR_I2C */ -#define GPIO_DSCR_I2C_DSE(x) ((x)&0x03) +#define GPIO_DSCR_I2C_DSE(x) ((x)&0x03) /* Bit definitions and macros for GPIO_DSCR_PWM */ -#define GPIO_DSCR_PWM_DSE(x) ((x)&0x03) +#define GPIO_DSCR_PWM_DSE(x) ((x)&0x03) /* Bit definitions and macros for GPIO_DSCR_FEC */ -#define GPIO_DSCR_FEC_DSE(x) ((x)&0x03) +#define GPIO_DSCR_FEC_DSE(x) ((x)&0x03) /* Bit definitions and macros for GPIO_DSCR_UART */ -#define GPIO_DSCR_UART0_DSE(x) ((x)&0x03) -#define GPIO_DSCR_UART1_DSE(x) (((x)&0x03)<<2) +#define GPIO_DSCR_UART0_DSE(x) ((x)&0x03) +#define GPIO_DSCR_UART1_DSE(x) (((x)&0x03)<<2) /* Bit definitions and macros for GPIO_DSCR_QSPI */ -#define GPIO_DSCR_QSPI_DSE(x) ((x)&0x03) +#define GPIO_DSCR_QSPI_DSE(x) ((x)&0x03) /* Bit definitions and macros for GPIO_DSCR_TIMER */ -#define GPIO_DSCR_TIMER_DSE(x) ((x)&0x03) +#define GPIO_DSCR_TIMER_DSE(x) ((x)&0x03) /* Bit definitions and macros for GPIO_DSCR_SSI */ -#define GPIO_DSCR_SSI_DSE(x) ((x)&0x03) +#define GPIO_DSCR_SSI_DSE(x) ((x)&0x03) /* Bit definitions and macros for GPIO_DSCR_LCD */ -#define GPIO_DSCR_LCD_DSE(x) ((x)&0x03) +#define GPIO_DSCR_LCD_DSE(x) ((x)&0x03) /* Bit definitions and macros for GPIO_DSCR_DEBUG */ -#define GPIO_DSCR_DEBUG_DSE(x) ((x)&0x03) +#define GPIO_DSCR_DEBUG_DSE(x) ((x)&0x03) /* Bit definitions and macros for GPIO_DSCR_CLKRST */ -#define GPIO_DSCR_CLKRST_DSE(x) ((x)&0x03) +#define GPIO_DSCR_CLKRST_DSE(x) ((x)&0x03) /* Bit definitions and macros for GPIO_DSCR_IRQ */ -#define GPIO_DSCR_IRQ_DSE(x) ((x)&0x03) +#define GPIO_DSCR_IRQ_DSE(x) ((x)&0x03) /* not done yet */ /********************************************************************* * LCD Controller (LCDC) *********************************************************************/ /* Bit definitions and macros for LCDC_LSSAR */ -#define LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2) +#define LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2) /* Bit definitions and macros for LCDC_LSR */ -#define LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0) -#define LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20) +#define LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0) +#define LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20) /* Bit definitions and macros for LCDC_LVPWR */ -#define LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0) +#define LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0) /* Bit definitions and macros for LCDC_LCPR */ -#define LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0) -#define LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16) -#define LCDC_LCPR_OP (0x10000000) -#define LCDC_LCPR_CC(x) (((x)&0x00000003)<<30) -#define LCDC_LCPR_CC_TRANSPARENT (0x00000000) -#define LCDC_LCPR_CC_OR (0x40000000) -#define LCDC_LCPR_CC_XOR (0x80000000) -#define LCDC_LCPR_CC_AND (0xC0000000) -#define LCDC_LCPR_OP_ON (0x10000000) -#define LCDC_LCPR_OP_OFF (0x00000000) +#define LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0) +#define LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16) +#define LCDC_LCPR_OP (0x10000000) +#define LCDC_LCPR_CC(x) (((x)&0x00000003)<<30) +#define LCDC_LCPR_CC_TRANSPARENT (0x00000000) +#define LCDC_LCPR_CC_OR (0x40000000) +#define LCDC_LCPR_CC_XOR (0x80000000) +#define LCDC_LCPR_CC_AND (0xC0000000) +#define LCDC_LCPR_OP_ON (0x10000000) +#define LCDC_LCPR_OP_OFF (0x00000000) /* Bit definitions and macros for LCDC_LCWHBR */ -#define LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0) -#define LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16) -#define LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24) -#define LCDC_LCWHBR_BK_EN (0x80000000) -#define LCDC_LCWHBR_BK_EN_ON (0x80000000) -#define LCDC_LCWHBR_BK_EN_OFF (0x00000000) +#define LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0) +#define LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16) +#define LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24) +#define LCDC_LCWHBR_BK_EN (0x80000000) +#define LCDC_LCWHBR_BK_EN_ON (0x80000000) +#define LCDC_LCWHBR_BK_EN_OFF (0x00000000) /* Bit definitions and macros for LCDC_LCCMR */ -#define LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0) -#define LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6) -#define LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12) +#define LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0) +#define LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6) +#define LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12) /* Bit definitions and macros for LCDC_LPCR */ -#define LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0) -#define LCDC_LPCR_SHARP (0x00000040) -#define LCDC_LPCR_SCLKSEL (0x00000080) -#define LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8) -#define LCDC_LPCR_ACDSEL (0x00008000) -#define LCDC_LPCR_REV_VS (0x00010000) -#define LCDC_LPCR_SWAP_SEL (0x00020000) -#define LCDC_LPCR_ENDSEL (0x00040000) -#define LCDC_LPCR_SCLKIDLE (0x00080000) -#define LCDC_LPCR_OEPOL (0x00100000) -#define LCDC_LPCR_CLKPOL (0x00200000) -#define LCDC_LPCR_LPPOL (0x00400000) -#define LCDC_LPCR_FLM (0x00800000) -#define LCDC_LPCR_PIXPOL (0x01000000) -#define LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25) -#define LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28) -#define LCDC_LPCR_COLOR (0x40000000) -#define LCDC_LPCR_TFT (0x80000000) -#define LCDC_LPCR_MODE_MONOCHROME (0x00000000) -#define LCDC_LPCR_MODE_CSTN (0x40000000) -#define LCDC_LPCR_MODE_TFT (0xC0000000) -#define LCDC_LPCR_PBSIZ_1 (0x00000000) -#define LCDC_LPCR_PBSIZ_2 (0x10000000) -#define LCDC_LPCR_PBSIZ_4 (0x20000000) -#define LCDC_LPCR_PBSIZ_8 (0x30000000) -#define LCDC_LPCR_BPIX_1bpp (0x00000000) -#define LCDC_LPCR_BPIX_2bpp (0x02000000) -#define LCDC_LPCR_BPIX_4bpp (0x04000000) -#define LCDC_LPCR_BPIX_8bpp (0x06000000) -#define LCDC_LPCR_BPIX_12bpp (0x08000000) -#define LCDC_LPCR_BPIX_16bpp (0x0A000000) -#define LCDC_LPCR_BPIX_18bpp (0x0C000000) - -#define LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30) +#define LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0) +#define LCDC_LPCR_SHARP (0x00000040) +#define LCDC_LPCR_SCLKSEL (0x00000080) +#define LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8) +#define LCDC_LPCR_ACDSEL (0x00008000) +#define LCDC_LPCR_REV_VS (0x00010000) +#define LCDC_LPCR_SWAP_SEL (0x00020000) +#define LCDC_LPCR_ENDSEL (0x00040000) +#define LCDC_LPCR_SCLKIDLE (0x00080000) +#define LCDC_LPCR_OEPOL (0x00100000) +#define LCDC_LPCR_CLKPOL (0x00200000) +#define LCDC_LPCR_LPPOL (0x00400000) +#define LCDC_LPCR_FLM (0x00800000) +#define LCDC_LPCR_PIXPOL (0x01000000) +#define LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25) +#define LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28) +#define LCDC_LPCR_COLOR (0x40000000) +#define LCDC_LPCR_TFT (0x80000000) +#define LCDC_LPCR_MODE_MONOCHROME (0x00000000) +#define LCDC_LPCR_MODE_CSTN (0x40000000) +#define LCDC_LPCR_MODE_TFT (0xC0000000) +#define LCDC_LPCR_PBSIZ_1 (0x00000000) +#define LCDC_LPCR_PBSIZ_2 (0x10000000) +#define LCDC_LPCR_PBSIZ_4 (0x20000000) +#define LCDC_LPCR_PBSIZ_8 (0x30000000) +#define LCDC_LPCR_BPIX_1bpp (0x00000000) +#define LCDC_LPCR_BPIX_2bpp (0x02000000) +#define LCDC_LPCR_BPIX_4bpp (0x04000000) +#define LCDC_LPCR_BPIX_8bpp (0x06000000) +#define LCDC_LPCR_BPIX_12bpp (0x08000000) +#define LCDC_LPCR_BPIX_16bpp (0x0A000000) +#define LCDC_LPCR_BPIX_18bpp (0x0C000000) + +#define LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30) /* Bit definitions and macros for LCDC_LHCR */ -#define LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0) -#define LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8) -#define LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26) +#define LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0) +#define LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8) +#define LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26) /* Bit definitions and macros for LCDC_LVCR */ -#define LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0) -#define LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8) -#define LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26) +#define LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0) +#define LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8) +#define LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26) /* Bit definitions and macros for LCDC_LPOR */ -#define LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0) +#define LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0) /* Bit definitions and macros for LCDC_LPCCR */ -#define LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0) -#define LCDC_LPCCR_CC_EN (0x00000100) -#define LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9) -#define LCDC_LPCCR_LDMSK (0x00008000) -#define LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16) -#define LCDC_LPCCR_SCR_LINEPULSE (0x00000000) -#define LCDC_LPCCR_SCR_PIXELCLK (0x00002000) -#define LCDC_LPCCR_SCR_LCDCLOCK (0x00004000) +#define LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0) +#define LCDC_LPCCR_CC_EN (0x00000100) +#define LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9) +#define LCDC_LPCCR_LDMSK (0x00008000) +#define LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16) +#define LCDC_LPCCR_SCR_LINEPULSE (0x00000000) +#define LCDC_LPCCR_SCR_PIXELCLK (0x00002000) +#define LCDC_LPCCR_SCR_LCDCLOCK (0x00004000) /* Bit definitions and macros for LCDC_LDCR */ -#define LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0) -#define LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16) -#define LCDC_LDCR_BURST (0x80000000) +#define LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0) +#define LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16) +#define LCDC_LDCR_BURST (0x80000000) /* Bit definitions and macros for LCDC_LRMCR */ -#define LCDC_LRMCR_SEL_REF (0x00000001) +#define LCDC_LRMCR_SEL_REF (0x00000001) /* Bit definitions and macros for LCDC_LICR */ -#define LCDC_LICR_INTCON (0x00000001) -#define LCDC_LICR_INTSYN (0x00000004) -#define LCDC_LICR_GW_INT_CON (0x00000010) +#define LCDC_LICR_INTCON (0x00000001) +#define LCDC_LICR_INTSYN (0x00000004) +#define LCDC_LICR_GW_INT_CON (0x00000010) /* Bit definitions and macros for LCDC_LIER */ -#define LCDC_LIER_BOF_EN (0x00000001) -#define LCDC_LIER_EOF_EN (0x00000002) -#define LCDC_LIER_ERR_RES_EN (0x00000004) -#define LCDC_LIER_UDR_ERR_EN (0x00000008) -#define LCDC_LIER_GW_BOF_EN (0x00000010) -#define LCDC_LIER_GW_EOF_EN (0x00000020) -#define LCDC_LIER_GW_ERR_RES_EN (0x00000040) -#define LCDC_LIER_GW_UDR_ERR_EN (0x00000080) +#define LCDC_LIER_BOF_EN (0x00000001) +#define LCDC_LIER_EOF_EN (0x00000002) +#define LCDC_LIER_ERR_RES_EN (0x00000004) +#define LCDC_LIER_UDR_ERR_EN (0x00000008) +#define LCDC_LIER_GW_BOF_EN (0x00000010) +#define LCDC_LIER_GW_EOF_EN (0x00000020) +#define LCDC_LIER_GW_ERR_RES_EN (0x00000040) +#define LCDC_LIER_GW_UDR_ERR_EN (0x00000080) /* Bit definitions and macros for LCDC_LISR */ -#define LCDC_LISR_BOF (0x00000001) -#define LCDC_LISR_EOF (0x00000002) -#define LCDC_LISR_ERR_RES (0x00000004) -#define LCDC_LISR_UDR_ERR (0x00000008) -#define LCDC_LISR_GW_BOF (0x00000010) -#define LCDC_LISR_GW_EOF (0x00000020) -#define LCDC_LISR_GW_ERR_RES (0x00000040) -#define LCDC_LISR_GW_UDR_ERR (0x00000080) +#define LCDC_LISR_BOF (0x00000001) +#define LCDC_LISR_EOF (0x00000002) +#define LCDC_LISR_ERR_RES (0x00000004) +#define LCDC_LISR_UDR_ERR (0x00000008) +#define LCDC_LISR_GW_BOF (0x00000010) +#define LCDC_LISR_GW_EOF (0x00000020) +#define LCDC_LISR_GW_ERR_RES (0x00000040) +#define LCDC_LISR_GW_UDR_ERR (0x00000080) /* Bit definitions and macros for LCDC_LGWSAR */ -#define LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2) +#define LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2) /* Bit definitions and macros for LCDC_LGWSR */ -#define LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0) -#define LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20) +#define LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0) +#define LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20) /* Bit definitions and macros for LCDC_LGWVPWR */ -#define LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0) +#define LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0) /* Bit definitions and macros for LCDC_LGWPOR */ -#define LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0) +#define LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0) /* Bit definitions and macros for LCDC_LGWPR */ -#define LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0) -#define LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16) +#define LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0) +#define LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16) /* Bit definitions and macros for LCDC_LGWCR */ -#define LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0) -#define LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6) -#define LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12) -#define LCDC_LGWCR_GW_RVS (0x00200000) -#define LCDC_LGWCR_GWE (0x00400000) -#define LCDC_LGWCR_GWCKE (0x00800000) -#define LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24) +#define LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0) +#define LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6) +#define LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12) +#define LCDC_LGWCR_GW_RVS (0x00200000) +#define LCDC_LGWCR_GWE (0x00400000) +#define LCDC_LGWCR_GWCKE (0x00800000) +#define LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24) /* Bit definitions and macros for LCDC_LGWDCR */ -#define LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0) -#define LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16) -#define LCDC_LGWDCR_GWBT (0x80000000) - -/* Bit definitions and macros for LCDC_BPLUT_BASE */ -#define LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for LCDC_GWLUT_BASE */ -#define LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) - -/* not done yet */ -/********************************************************************* -* USB Controller (USB) -*********************************************************************/ -/* Bit definitions and macros for USB_HCSPARAMS */ -#define USB_HCSPARAMS_N_PORTS(x) ((x)&0x0000000F) -#define USB_HCSPARAMS_PPC (0x00000010) -#define USB_HCSPARAMS_N_PCC(x) (((x)&0x0000000F)<<8) -#define USB_HCSPARAMS_N_CC(x) (((x)&0x0000000F)<<12) -#define USB_HCSPARAMS_PI (0x00010000) -#define USB_HCSPARAMS_N_PTT(x) (((x)&0x0000000F)<<20) -#define USB_HCSPARAMS_N_TT(x) (((x)&0x0000000F)<<24) - -/* Bit definitions and macros for USB_HCCPARAMS */ -#define USB_HCCPARAMS_ADC (0x00000001) -#define USB_HCCPARAMS_PFL (0x00000002) -#define USB_HCCPARAMS_ASP (0x00000004) -#define USB_HCCPARAMS_IST(x) (((x)&0x0000000F)<<4) -#define USB_HCCPARAMS_EECP(x) (((x)&0x000000FF)<<8) - -/* Bit definitions and macros for USB_DCIVERSION */ -#define USB_DCIVERSION_DCIVERSION(x) (((x)&0xFFFF)<<0) - -/* Bit definitions and macros for USB_DCCPARAMS */ -#define USB_DCCPARAMS_DEN(x) (((x)&0x0000001F)<<0) -#define USB_DCCPARAMS_DC (0x00000080) -#define USB_DCCPARAMS_HC (0x00000100) - -/* Bit definitions and macros for USB_USBCMD */ -#define USB_USBCMD_RS (0x00000001) -#define USB_USBCMD_RST (0x00000002) -#define USB_USBCMD_FS0 (0x00000004) -#define USB_USBCMD_FS1 (0x00000008) -#define USB_USBCMD_PSE (0x00000010) -#define USB_USBCMD_ASE (0x00000020) -#define USB_USBCMD_IAA (0x00000040) -#define USB_USBCMD_LR (0x00000080) -#define USB_USBCMD_ASP(x) (((x)&0x00000003)<<8) -#define USB_USBCMD_ASPE (0x00000800) -#define USB_USBCMD_SUTW (0x00002000) -#define USB_USBCMD_ATDTW (0x00004000) -#define USB_USBCMD_FS2 (0x00008000) -#define USB_USBCMD_ITC(x) (((x)&0x000000FF)<<16) -#define USB_USBCMD_ITC_IMM (0x00000000) -#define USB_USBCMD_ITC_1 (0x00010000) -#define USB_USBCMD_ITC_2 (0x00020000) -#define USB_USBCMD_ITC_4 (0x00040000) -#define USB_USBCMD_ITC_8 (0x00080000) -#define USB_USBCMD_ITC_16 (0x00100000) -#define USB_USBCMD_ITC_32 (0x00200000) -#define USB_USBCMD_ITC_40 (0x00400000) -#define USB_USBCMD_FS_1024 (0x00000000) -#define USB_USBCMD_FS_512 (0x00000004) -#define USB_USBCMD_FS_256 (0x00000008) -#define USB_USBCMD_FS_128 (0x0000000C) -#define USB_USBCMD_FS_64 (0x00008000) -#define USB_USBCMD_FS_32 (0x00008004) -#define USB_USBCMD_FS_16 (0x00008008) -#define USB_USBCMD_FS_8 (0x0000800C) - -/* Bit definitions and macros for USB_USBSTS */ -#define USB_USBSTS_UI (0x00000001) -#define USB_USBSTS_UEI (0x00000002) -#define USB_USBSTS_PCI (0x00000004) -#define USB_USBSTS_FRI (0x00000008) -#define USB_USBSTS_SEI (0x00000010) -#define USB_USBSTS_AAI (0x00000020) -#define USB_USBSTS_URI (0x00000040) -#define USB_USBSTS_SRI (0x00000080) -#define USB_USBSTS_SLI (0x00000100) -#define USB_USBSTS_HCH (0x00001000) -#define USB_USBSTS_RCL (0x00002000) -#define USB_USBSTS_PS (0x00004000) -#define USB_USBSTS_AS (0x00008000) - -/* Bit definitions and macros for USB_USBINTR */ -#define USB_USBINTR_UE (0x00000001) -#define USB_USBINTR_UEE (0x00000002) -#define USB_USBINTR_PCE (0x00000004) -#define USB_USBINTR_FRE (0x00000008) -#define USB_USBINTR_SEE (0x00000010) -#define USB_USBINTR_AAE (0x00000020) -#define USB_USBINTR_URE (0x00000040) -#define USB_USBINTR_SRE (0x00000080) -#define USB_USBINTR_SLE (0x00000100) - -/* Bit definitions and macros for USB_FRINDEX */ -#define USB_FRINDEX_FRINDEX(x) (((x)&0x00003FFF)<<0) - -/* Bit definitions and macros for USB_PERIODICLISTBASE */ -#define USB_PERIODICLISTBASE_PERBASE(x) (((x)&0x000FFFFF)<<12) - -/* Bit definitions and macros for USB_DEVICEADDR */ -#define USB_DEVICEADDR_USBADR(x) (((x)&0x0000007F)<<25) - -/* Bit definitions and macros for USB_ASYNCLISTADDR */ -#define USB_ASYNCLISTADDR_ASYBASE(x) (((x)&0x07FFFFFF)<<5) - -/* Bit definitions and macros for USB_EPLISTADDR */ -#define USB_EPLISTADDR_EPBASE(x) (((x)&0x001FFFFF)<<11) - -/* Bit definitions and macros for USB_ASNCTTSTS */ -#define USB_ASNCTTSTS_TTAS (0x00000001) -#define USB_ASNCTTSTS_TTAC (0x00000002) - -/* Bit definitions and macros for USB_BURSTSIZE */ -#define USB_BURSTSIZE_RXPBURST(x) (((x)&0x000000FF)<<0) -#define USB_BURSTSIZE_TXPBURST(x) (((x)&0x000000FF)<<8) - -/* Bit definitions and macros for USB_TXFILLTUNING */ -#define USB_TXFILLTUNING_TXSCHOH(x) (((x)&0x000000FF)<<0) -#define USB_TXFILLTUNING_TXSCHHEALTH(x) (((x)&0x0000001F)<<8) -#define USB_TXFILLTUNING_TXFIFOTHRES(x) (((x)&0x0000003F)<<16) - -/* Bit definitions and macros for USB_TXTTFILLTUNING */ -#define USB_TXTTFILLTUNING_TXTTSCHOH(x) (((x)&0x0000001F)<<0) -#define USB_TXTTFILLTUNING_TXTTSCHHEALTH(x) (((x)&0x0000001F)<<8) - -/* Bit definitions and macros for USB_ULPI_VIEWPORT */ -#define USB_ULPI_VIEWPORT_ULPI_DATWR(x) (((x)&0x000000FF)<<0) -#define USB_ULPI_VIEWPORT_ULPI_DATRD(x) (((x)&0x000000FF)<<8) -#define USB_ULPI_VIEWPORT_ULPI_ADDR(x) (((x)&0x000000FF)<<16) -#define USB_ULPI_VIEWPORT_ULPI_PORT(x) (((x)&0x00000007)<<24) -#define USB_ULPI_VIEWPORT_ULPI_SS (0x08000000) -#define USB_ULPI_VIEWPORT_ULPI_RW (0x20000000) -#define USB_ULPI_VIEWPORT_ULPI_RUN (0x40000000) -#define USB_ULPI_VIEWPORT_ULPI_WU (0x80000000) - -/* Bit definitions and macros for USB_CONFIGFLAG */ -#define USB_CONFIGFLAG_CONFIGFLAG(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for USB_PORTSC */ -#define USB_PORTSC_CCS (0x00000001) -#define USB_PORTSC_CSC (0x00000002) -#define USB_PORTSC_PE (0x00000004) -#define USB_PORTSC_PEC (0x00000008) -#define USB_PORTSC_OCA (0x00000010) -#define USB_PORTSC_OCC (0x00000020) -#define USB_PORTSC_FPR (0x00000040) -#define USB_PORTSC_SUSP (0x00000080) -#define USB_PORTSC_PR (0x00000100) -#define USB_PORTSC_LS(x) (((x)&0x00000003)<<10) -#define USB_PORTSC_PP (0x00001000) -#define USB_PORTSC_PO (0x00002000) -#define USB_PORTSC_PIC(x) (((x)&0x00000003)<<14) -#define USB_PORTSC_PTC(x) (((x)&0x0000000F)<<16) -#define USB_PORTSC_WLCN (0x00100000) -#define USB_PORTSC_WKDS (0x00200000) -#define USB_PORTSC_WKOC (0x00400000) -#define USB_PORTSC_PHCD (0x00800000) -#define USB_PORTSC_PFSC (0x01000000) -#define USB_PORTSC_PSPD(x) (((x)&0x00000003)<<26) -#define USB_PORTSC_PTS(x) (((x)&0x00000003)<<30) -#define USB_PORTSC_PTS_ULPI (0x80000000) -#define USB_PORTSC_PTS_FS_LS (0xC0000000) -#define USB_PORTSC_PSPD_FULL (0x00000000) -#define USB_PORTSC_PSPD_LOW (0x04000000) -#define USB_PORTSC_PSPD_HIGH (0x08000000) -#define USB_PORTSC_PTC_DISBALE (0x00000000) -#define USB_PORTSC_PTC_JSTATE (0x00010000) -#define USB_PORTSC_PTC_KSTATE (0x00020000) -#define USB_PORTSC_PTC_SEQ_NAK (0x00030000) -#define USB_PORTSC_PTC_PACKET (0x00040000) -#define USB_PORTSC_PTC_FORCE_ENABLE (0x00050000) -#define USB_PORTSC_PIC_OFF (0x00000000) -#define USB_PORTSC_PIC_AMBER (0x00004000) -#define USB_PORTSC_PIC_GREEN (0x00008000) -#define USB_PORTSC_LS_SE0 (0x00000000) -#define USB_PORTSC_LS_JSTATE (0x00000400) -#define USB_PORTSC_LS_KSTATE (0x00000800) - -/* Bit definitions and macros for USB_OTGSC */ -#define USB_OTGSC_VD (0x00000001) -#define USB_OTGSC_VC (0x00000002) -#define USB_OTGSC_OT (0x00000008) -#define USB_OTGSC_DP (0x00000010) -#define USB_OTGSC_ID (0x00000100) -#define USB_OTGSC_AVV (0x00000200) -#define USB_OTGSC_ASV (0x00000400) -#define USB_OTGSC_BSV (0x00000800) -#define USB_OTGSC_BSE (0x00001000) -#define USB_OTGSC_1MST (0x00002000) -#define USB_OTGSC_DPS (0x00004000) -#define USB_OTGSC_IDIS (0x00010000) -#define USB_OTGSC_AVVIS (0x00020000) -#define USB_OTGSC_ASVIS (0x00040000) -#define USB_OTGSC_BSVIS (0x00080000) -#define USB_OTGSC_BSEIS (0x00100000) -#define USB_OTGSC_1MSS (0x00200000) -#define USB_OTGSC_DPIS (0x00400000) -#define USB_OTGSC_IDIE (0x01000000) -#define USB_OTGSC_AVVIE (0x02000000) -#define USB_OTGSC_ASVIE (0x04000000) -#define USB_OTGSC_BSVIE (0x08000000) -#define USB_OTGSC_BSEIE (0x10000000) -#define USB_OTGSC_1MSE (0x20000000) -#define USB_OTGSC_DPIE (0x40000000) -#define USB_OTGSC_CLEAR (0x007F0000) -#define USB_OTGSC_ENABLE_ALL (0x7F000000) - -/* Bit definitions and macros for USB_USBMODE */ -#define USB_USBMODE_CM(x) (((x)&0x00000003)<<0) -#define USB_USBMODE_SLOM (0x00000008) -#define USB_USBMODE_SDIS (0x00000010) -#define USB_USBMODE_CM_IDLE (0x00000000) -#define USB_USBMODE_CM_DEVICE (0x00000002) -#define USB_USBMODE_CM_HOST (0x00000003) -#define USB_USBMODE_ES (0x00000004) - -/* Bit definitions and macros for USB_EPSETUPSR */ -#define USB_EPSETUPSR_EPSETUPSTAT(x) (((x)&0x0000003F)<<0) - -/* Bit definitions and macros for USB_EPPRIME */ -#define USB_EPPRIME_PERB(x) (((x)&0x0000003F)<<0) -#define USB_EPPRIME_PETB(x) (((x)&0x0000003F)<<16) -#define USB_EPPRIME_PETB0 (0x00010000) -#define USB_EPPRIME_PETB1 (0x00020000) -#define USB_EPPRIME_PETB2 (0x00040000) -#define USB_EPPRIME_PETB3 (0x00080000) -#define USB_EPPRIME_PETB4 (0x00100000) -#define USB_EPPRIME_PETB5 (0x00200000) -#define USB_EPPRIME_PERB0 (0x00000001) -#define USB_EPPRIME_PERB1 (0x00000002) -#define USB_EPPRIME_PERB2 (0x00000004) -#define USB_EPPRIME_PERB3 (0x00000008) -#define USB_EPPRIME_PERB4 (0x00000010) -#define USB_EPPRIME_PERB5 (0x00000020) - -/* Bit definitions and macros for USB_EPFLUSH */ -#define USB_EPFLUSH_FERB(x) (((x)&0x0000003F)<<0) -#define USB_EPFLUSH_FETB(x) (((x)&0x0000003F)<<16) -#define USB_EPFLUSH_FETB0 (0x00010000) -#define USB_EPFLUSH_FETB1 (0x00020000) -#define USB_EPFLUSH_FETB2 (0x00040000) -#define USB_EPFLUSH_FETB3 (0x00080000) -#define USB_EPFLUSH_FETB4 (0x00100000) -#define USB_EPFLUSH_FETB5 (0x00200000) -#define USB_EPFLUSH_FERB0 (0x00000001) -#define USB_EPFLUSH_FERB1 (0x00000002) -#define USB_EPFLUSH_FERB2 (0x00000004) -#define USB_EPFLUSH_FERB3 (0x00000008) -#define USB_EPFLUSH_FERB4 (0x00000010) -#define USB_EPFLUSH_FERB5 (0x00000020) - -/* Bit definitions and macros for USB_EPSR */ -#define USB_EPSR_ERBR(x) (((x)&0x0000003F)<<0) -#define USB_EPSR_ETBR(x) (((x)&0x0000003F)<<16) -#define USB_EPSR_ETBR0 (0x00010000) -#define USB_EPSR_ETBR1 (0x00020000) -#define USB_EPSR_ETBR2 (0x00040000) -#define USB_EPSR_ETBR3 (0x00080000) -#define USB_EPSR_ETBR4 (0x00100000) -#define USB_EPSR_ETBR5 (0x00200000) -#define USB_EPSR_ERBR0 (0x00000001) -#define USB_EPSR_ERBR1 (0x00000002) -#define USB_EPSR_ERBR2 (0x00000004) -#define USB_EPSR_ERBR3 (0x00000008) -#define USB_EPSR_ERBR4 (0x00000010) -#define USB_EPSR_ERBR5 (0x00000020) - -/* Bit definitions and macros for USB_EPCOMPLETE */ -#define USB_EPCOMPLETE_ERCE(x) (((x)&0x0000003F)<<0) -#define USB_EPCOMPLETE_ETCE(x) (((x)&0x0000003F)<<16) -#define USB_EPCOMPLETE_ETCE0 (0x00010000) -#define USB_EPCOMPLETE_ETCE1 (0x00020000) -#define USB_EPCOMPLETE_ETCE2 (0x00040000) -#define USB_EPCOMPLETE_ETCE3 (0x00080000) -#define USB_EPCOMPLETE_ETCE4 (0x00100000) -#define USB_EPCOMPLETE_ETCE5 (0x00200000) -#define USB_EPCOMPLETE_ERCE0 (0x00000001) -#define USB_EPCOMPLETE_ERCE1 (0x00000002) -#define USB_EPCOMPLETE_ERCE2 (0x00000004) -#define USB_EPCOMPLETE_ERCE3 (0x00000008) -#define USB_EPCOMPLETE_ERCE4 (0x00000010) -#define USB_EPCOMPLETE_ERCE5 (0x00000020) - -/* Bit definitions and macros for USB_EPCR0 */ -#define USB_EPCR0_RXS (0x00000001) -#define USB_EPCR0_RXT(x) (((x)&0x00000003)<<2) -#define USB_EPCR0_RXE (0x00000080) -#define USB_EPCR0_TXS (0x00010000) -#define USB_EPCR0_TXT(x) (((x)&0x00000003)<<18) -#define USB_EPCR0_TXE (0x00800000) - -/* Bit definitions and macros for USB_EPCR */ -#define USB_EPCR_RXS (0x00000001) -#define USB_EPCR_RXD (0x00000002) -#define USB_EPCR_RXT(x) (((x)&0x00000003)<<2) -#define USB_EPCR_RXI (0x00000020) -#define USB_EPCR_RXR (0x00000040) -#define USB_EPCR_RXE (0x00000080) -#define USB_EPCR_TXS (0x00010000) -#define USB_EPCR_TXD (0x00020000) -#define USB_EPCR_TXT(x) (((x)&0x00000003)<<18) -#define USB_EPCR_TXI (0x00200000) -#define USB_EPCR_TXR (0x00400000) -#define USB_EPCR_TXE (0x00800000) -#define USB_EPCR_TXT_CONTROL (0x00000000) -#define USB_EPCR_TXT_ISO (0x00040000) -#define USB_EPCR_TXT_BULK (0x00080000) -#define USB_EPCR_TXT_INT (0x000C0000) -#define USB_EPCR_RXT_CONTROL (0x00000000) -#define USB_EPCR_RXT_ISO (0x00000004) -#define USB_EPCR_RXT_BULK (0x00000008) -#define USB_EPCR_RXT_INT (0x0000000C) +#define LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0) +#define LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16) +#define LCDC_LGWDCR_GWBT (0x80000000) /********************************************************************* * SDRAM Controller (SDRAMC) *********************************************************************/ /* Bit definitions and macros for SDRAMC_SDMR */ -#define SDRAMC_SDMR_BNKAD_LEMR (0x40000000) -#define SDRAMC_SDMR_BNKAD_LMR (0x00000000) -#define SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) -#define SDRAMC_SDMR_CMD (0x00010000) +#define SDRAMC_SDMR_BNKAD_LEMR (0x40000000) +#define SDRAMC_SDMR_BNKAD_LMR (0x00000000) +#define SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) +#define SDRAMC_SDMR_CMD (0x00010000) /* Bit definitions and macros for SDRAMC_SDCR */ -#define SDRAMC_SDCR_MODE_EN (0x80000000) -#define SDRAMC_SDCR_CKE (0x40000000) -#define SDRAMC_SDCR_DDR (0x20000000) -#define SDRAMC_SDCR_REF (0x10000000) -#define SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24) -#define SDRAMC_SDCR_OE_RULE (0x00400000) -#define SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16) -#define SDRAMC_SDCR_PS_32 (0x00000000) -#define SDRAMC_SDCR_PS_16 (0x00002000) -#define SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8) -#define SDRAMC_SDCR_IREF (0x00000004) -#define SDRAMC_SDCR_IPALL (0x00000002) +#define SDRAMC_SDCR_MODE_EN (0x80000000) +#define SDRAMC_SDCR_CKE (0x40000000) +#define SDRAMC_SDCR_DDR (0x20000000) +#define SDRAMC_SDCR_REF (0x10000000) +#define SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24) +#define SDRAMC_SDCR_OE_RULE (0x00400000) +#define SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16) +#define SDRAMC_SDCR_PS_32 (0x00000000) +#define SDRAMC_SDCR_PS_16 (0x00002000) +#define SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8) +#define SDRAMC_SDCR_IREF (0x00000004) +#define SDRAMC_SDCR_IPALL (0x00000002) /* Bit definitions and macros for SDRAMC_SDCFG1 */ -#define SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28) -#define SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24) -#define SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20) -#define SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) -#define SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) -#define SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) -#define SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4) +#define SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28) +#define SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24) +#define SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20) +#define SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) +#define SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) +#define SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) +#define SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4) /* Bit definitions and macros for SDRAMC_SDCFG2 */ -#define SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28) -#define SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24) -#define SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20) -#define SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) +#define SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28) +#define SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24) +#define SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20) +#define SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) /* Bit definitions and macros for SDRAMC_SDDS */ -#define SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8) -#define SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6) -#define SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4) -#define SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2) -#define SDRAMC_SDDS_SB_D(x) ((x)&0x00000003) +#define SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8) +#define SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6) +#define SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4) +#define SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2) +#define SDRAMC_SDDS_SB_D(x) ((x)&0x00000003) /* Bit definitions and macros for SDRAMC_SDCS */ -#define SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20) -#define SDRAMC_SDCS_CSSZ(x) ((x)&0x0000001F) -#define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) -#define SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) -#define SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) -#define SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) -#define SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) -#define SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) -#define SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) -#define SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) -#define SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) -#define SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) -#define SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) -#define SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) -#define SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) -#define SDRAMC_SDCS_CSSZ_DIABLE (0x00000000) +#define SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20) +#define SDRAMC_SDCS_CSSZ(x) ((x)&0x0000001F) +#define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) +#define SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) +#define SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) +#define SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) +#define SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) +#define SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) +#define SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) +#define SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) +#define SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) +#define SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) +#define SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) +#define SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) +#define SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) +#define SDRAMC_SDCS_CSSZ_DIABLE (0x00000000) /********************************************************************* * Synchronous Serial Interface (SSI) *********************************************************************/ /* Bit definitions and macros for SSI_CR */ -#define SSI_CR_CIS (0x00000200) -#define SSI_CR_TCH (0x00000100) -#define SSI_CR_MCE (0x00000080) -#define SSI_CR_I2S_SLAVE (0x00000040) -#define SSI_CR_I2S_MASTER (0x00000020) -#define SSI_CR_I2S_NORMAL (0x00000000) -#define SSI_CR_SYN (0x00000010) -#define SSI_CR_NET (0x00000008) -#define SSI_CR_RE (0x00000004) -#define SSI_CR_TE (0x00000002) -#define SSI_CR_SSI_EN (0x00000001) +#define SSI_CR_CIS (0x00000200) +#define SSI_CR_TCH (0x00000100) +#define SSI_CR_MCE (0x00000080) +#define SSI_CR_I2S_SLAVE (0x00000040) +#define SSI_CR_I2S_MASTER (0x00000020) +#define SSI_CR_I2S_NORMAL (0x00000000) +#define SSI_CR_SYN (0x00000010) +#define SSI_CR_NET (0x00000008) +#define SSI_CR_RE (0x00000004) +#define SSI_CR_TE (0x00000002) +#define SSI_CR_SSI_EN (0x00000001) /* Bit definitions and macros for SSI_ISR */ -#define SSI_ISR_CMDAU (0x00040000) -#define SSI_ISR_CMDDU (0x00020000) -#define SSI_ISR_RXT (0x00010000) -#define SSI_ISR_RDR1 (0x00008000) -#define SSI_ISR_RDR0 (0x00004000) -#define SSI_ISR_TDE1 (0x00002000) -#define SSI_ISR_TDE0 (0x00001000) -#define SSI_ISR_ROE1 (0x00000800) -#define SSI_ISR_ROE0 (0x00000400) -#define SSI_ISR_TUE1 (0x00000200) -#define SSI_ISR_TUE0 (0x00000100) -#define SSI_ISR_TFS (0x00000080) -#define SSI_ISR_RFS (0x00000040) -#define SSI_ISR_TLS (0x00000020) -#define SSI_ISR_RLS (0x00000010) -#define SSI_ISR_RFF1 (0x00000008) -#define SSI_ISR_RFF0 (0x00000004) -#define SSI_ISR_TFE1 (0x00000002) -#define SSI_ISR_TFE0 (0x00000001) +#define SSI_ISR_CMDAU (0x00040000) +#define SSI_ISR_CMDDU (0x00020000) +#define SSI_ISR_RXT (0x00010000) +#define SSI_ISR_RDR1 (0x00008000) +#define SSI_ISR_RDR0 (0x00004000) +#define SSI_ISR_TDE1 (0x00002000) +#define SSI_ISR_TDE0 (0x00001000) +#define SSI_ISR_ROE1 (0x00000800) +#define SSI_ISR_ROE0 (0x00000400) +#define SSI_ISR_TUE1 (0x00000200) +#define SSI_ISR_TUE0 (0x00000100) +#define SSI_ISR_TFS (0x00000080) +#define SSI_ISR_RFS (0x00000040) +#define SSI_ISR_TLS (0x00000020) +#define SSI_ISR_RLS (0x00000010) +#define SSI_ISR_RFF1 (0x00000008) +#define SSI_ISR_RFF0 (0x00000004) +#define SSI_ISR_TFE1 (0x00000002) +#define SSI_ISR_TFE0 (0x00000001) /* Bit definitions and macros for SSI_IER */ -#define SSI_IER_RDMAE (0x00400000) -#define SSI_IER_RIE (0x00200000) -#define SSI_IER_TDMAE (0x00100000) -#define SSI_IER_TIE (0x00080000) -#define SSI_IER_CMDAU (0x00040000) -#define SSI_IER_CMDU (0x00020000) -#define SSI_IER_RXT (0x00010000) -#define SSI_IER_RDR1 (0x00008000) -#define SSI_IER_RDR0 (0x00004000) -#define SSI_IER_TDE1 (0x00002000) -#define SSI_IER_TDE0 (0x00001000) -#define SSI_IER_ROE1 (0x00000800) -#define SSI_IER_ROE0 (0x00000400) -#define SSI_IER_TUE1 (0x00000200) -#define SSI_IER_TUE0 (0x00000100) -#define SSI_IER_TFS (0x00000080) -#define SSI_IER_RFS (0x00000040) -#define SSI_IER_TLS (0x00000020) -#define SSI_IER_RLS (0x00000010) -#define SSI_IER_RFF1 (0x00000008) -#define SSI_IER_RFF0 (0x00000004) -#define SSI_IER_TFE1 (0x00000002) -#define SSI_IER_TFE0 (0x00000001) +#define SSI_IER_RDMAE (0x00400000) +#define SSI_IER_RIE (0x00200000) +#define SSI_IER_TDMAE (0x00100000) +#define SSI_IER_TIE (0x00080000) +#define SSI_IER_CMDAU (0x00040000) +#define SSI_IER_CMDU (0x00020000) +#define SSI_IER_RXT (0x00010000) +#define SSI_IER_RDR1 (0x00008000) +#define SSI_IER_RDR0 (0x00004000) +#define SSI_IER_TDE1 (0x00002000) +#define SSI_IER_TDE0 (0x00001000) +#define SSI_IER_ROE1 (0x00000800) +#define SSI_IER_ROE0 (0x00000400) +#define SSI_IER_TUE1 (0x00000200) +#define SSI_IER_TUE0 (0x00000100) +#define SSI_IER_TFS (0x00000080) +#define SSI_IER_RFS (0x00000040) +#define SSI_IER_TLS (0x00000020) +#define SSI_IER_RLS (0x00000010) +#define SSI_IER_RFF1 (0x00000008) +#define SSI_IER_RFF0 (0x00000004) +#define SSI_IER_TFE1 (0x00000002) +#define SSI_IER_TFE0 (0x00000001) /* Bit definitions and macros for SSI_TCR */ -#define SSI_TCR_TXBIT0 (0x00000200) -#define SSI_TCR_TFEN1 (0x00000100) -#define SSI_TCR_TFEN0 (0x00000080) -#define SSI_TCR_TFDIR (0x00000040) -#define SSI_TCR_TXDIR (0x00000020) -#define SSI_TCR_TSHFD (0x00000010) -#define SSI_TCR_TSCKP (0x00000008) -#define SSI_TCR_TFSI (0x00000004) -#define SSI_TCR_TFSL (0x00000002) -#define SSI_TCR_TEFS (0x00000001) +#define SSI_TCR_TXBIT0 (0x00000200) +#define SSI_TCR_TFEN1 (0x00000100) +#define SSI_TCR_TFEN0 (0x00000080) +#define SSI_TCR_TFDIR (0x00000040) +#define SSI_TCR_TXDIR (0x00000020) +#define SSI_TCR_TSHFD (0x00000010) +#define SSI_TCR_TSCKP (0x00000008) +#define SSI_TCR_TFSI (0x00000004) +#define SSI_TCR_TFSL (0x00000002) +#define SSI_TCR_TEFS (0x00000001) /* Bit definitions and macros for SSI_RCR */ -#define SSI_RCR_RXEXT (0x00000400) -#define SSI_RCR_RXBIT0 (0x00000200) -#define SSI_RCR_RFEN1 (0x00000100) -#define SSI_RCR_RFEN0 (0x00000080) -#define SSI_RCR_RSHFD (0x00000010) -#define SSI_RCR_RSCKP (0x00000008) -#define SSI_RCR_RFSI (0x00000004) -#define SSI_RCR_RFSL (0x00000002) -#define SSI_RCR_REFS (0x00000001) +#define SSI_RCR_RXEXT (0x00000400) +#define SSI_RCR_RXBIT0 (0x00000200) +#define SSI_RCR_RFEN1 (0x00000100) +#define SSI_RCR_RFEN0 (0x00000080) +#define SSI_RCR_RSHFD (0x00000010) +#define SSI_RCR_RSCKP (0x00000008) +#define SSI_RCR_RFSI (0x00000004) +#define SSI_RCR_RFSL (0x00000002) +#define SSI_RCR_REFS (0x00000001) /* Bit definitions and macros for SSI_CCR */ -#define SSI_CCR_DIV2 (0x00040000) -#define SSI_CCR_PSR (0x00020000) -#define SSI_CCR_WL(x) (((x)&0x0000000F)<<13) -#define SSI_CCR_DC(x) (((x)&0x0000001F)<<8) -#define SSI_CCR_PM(x) ((x)&0x000000FF) +#define SSI_CCR_DIV2 (0x00040000) +#define SSI_CCR_PSR (0x00020000) +#define SSI_CCR_WL(x) (((x)&0x0000000F)<<13) +#define SSI_CCR_DC(x) (((x)&0x0000001F)<<8) +#define SSI_CCR_PM(x) ((x)&0x000000FF) /* Bit definitions and macros for SSI_FCSR */ -#define SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28) -#define SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24) -#define SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20) -#define SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16) -#define SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12) -#define SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8) -#define SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4) -#define SSI_FCSR_TFWM0(x) ((x)&0x0000000F) +#define SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28) +#define SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24) +#define SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20) +#define SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16) +#define SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12) +#define SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8) +#define SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4) +#define SSI_FCSR_TFWM0(x) ((x)&0x0000000F) /* Bit definitions and macros for SSI_ACR */ -#define SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5) -#define SSI_ACR_WR (0x00000010) -#define SSI_ACR_RD (0x00000008) -#define SSI_ACR_TIF (0x00000004) -#define SSI_ACR_FV (0x00000002) -#define SSI_ACR_AC97EN (0x00000001) +#define SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5) +#define SSI_ACR_WR (0x00000010) +#define SSI_ACR_RD (0x00000008) +#define SSI_ACR_TIF (0x00000004) +#define SSI_ACR_FV (0x00000002) +#define SSI_ACR_AC97EN (0x00000001) /* Bit definitions and macros for SSI_ACADD */ -#define SSI_ACADD_SSI_ACADD(x) ((x)&0x0007FFFF) +#define SSI_ACADD_SSI_ACADD(x) ((x)&0x0007FFFF) /* Bit definitions and macros for SSI_ACDAT */ -#define SSI_ACDAT_SSI_ACDAT(x) ((x)&0x0007FFFF) +#define SSI_ACDAT_SSI_ACDAT(x) ((x)&0x0007FFFF) /* Bit definitions and macros for SSI_ATAG */ -#define SSI_ATAG_DDI_ATAG(x) ((x)&0x0000FFFF) +#define SSI_ATAG_DDI_ATAG(x) ((x)&0x0000FFFF) /********************************************************************* * Phase Locked Loop (PLL) *********************************************************************/ /* Bit definitions and macros for PLL_PODR */ -#define PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4) -#define PLL_PODR_BUSDIV(x) ((x)&0x0F) +#define PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4) +#define PLL_PODR_BUSDIV(x) ((x)&0x0F) /* Bit definitions and macros for PLL_PLLCR */ -#define PLL_PLLCR_DITHEN (0x80) -#define PLL_PLLCR_DITHDEV(x) ((x)&0x07) +#define PLL_PLLCR_DITHEN (0x80) +#define PLL_PLLCR_DITHDEV(x) ((x)&0x07) #endif /* mcf5329_h */ -- cgit v1.1 From f52e78304dcc0ac459c0ea1fa5be275c7d1642cf Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 18:46:11 -0500 Subject: ColdFire: MCF5329 update cache Signed-off-by: TsiChungLiew --- cpu/mcf532x/start.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index ac44aaa..5cc1c87 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -268,7 +268,7 @@ _int_handler: icache_enable: move.l #0x01000000, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ - move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ + move.l #(CFG_SDRAM_BASE + 0xc000 + ((CFG_SDRAM_SIZE & 0x1fe0) << 11)), %d0 movec %d0, %ACR0 /* Enable cache */ move.l #0x80000200, %d0 /* Setup cache mask */ -- cgit v1.1 From 83ec20bc4380eebddfde45da6e3a69a92d4db21d Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:21:21 -0500 Subject: ColdFire: MCF52x2 update Signed-off-by: TsiChungLiew --- cpu/mcf52x2/Makefile | 4 +- cpu/mcf52x2/cpu.c | 154 ++++++------ cpu/mcf52x2/cpu_init.c | 382 ++++++++++++++++-------------- cpu/mcf52x2/fec.c | 605 ----------------------------------------------- cpu/mcf52x2/interrupts.c | 183 ++++---------- cpu/mcf52x2/serial.c | 215 ----------------- cpu/mcf52x2/start.S | 48 +++- lib_m68k/time.c | 276 --------------------- 8 files changed, 369 insertions(+), 1498 deletions(-) delete mode 100644 cpu/mcf52x2/fec.c delete mode 100644 cpu/mcf52x2/serial.c diff --git a/cpu/mcf52x2/Makefile b/cpu/mcf52x2/Makefile index 70d57cf..937cdd0 100644 --- a/cpu/mcf52x2/Makefile +++ b/cpu/mcf52x2/Makefile @@ -27,8 +27,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a -START = -COBJS = serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o +START = start.o +COBJS = interrupts.o cpu.o speed.o cpu_init.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c index ce59d39..96fe371 100644 --- a/cpu/mcf52x2/cpu.c +++ b/cpu/mcf52x2/cpu.c @@ -28,33 +28,15 @@ #include #include #include +#include #ifdef CONFIG_M5271 -#include -#include -#endif - -#ifdef CONFIG_M5272 -#include -#include -#endif - -#ifdef CONFIG_M5282 -#include -#include -#endif - -#ifdef CONFIG_M5249 -#include -#endif - -#ifdef CONFIG_M5271 /* * Both MCF5270 and MCF5271 are members of the MPC5271 family. Try to * determine which one we are running on, based on the Chip Identification * Register (CIR). */ -int checkcpu (void) +int checkcpu(void) { char buf[32]; unsigned short cir; /* Chip Identification Register */ @@ -80,156 +62,164 @@ int checkcpu (void) if (cpu_model) printf("CPU: Freescale ColdFire MCF%s rev. %hu, at %s MHz\n", - cpu_model, prn, strmhz(buf, CFG_CLK)); + cpu_model, prn, strmhz(buf, CFG_CLK)); else printf("CPU: Unknown - Freescale ColdFire MCF5271 family" - " (PIN: 0x%x) rev. %hu, at %s MHz\n", - pin, prn, strmhz(buf, CFG_CLK)); + " (PIN: 0x%x) rev. %hu, at %s MHz\n", + pin, prn, strmhz(buf, CFG_CLK)); return 0; } -int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) { +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ mbar_writeByte(MCF_RCM_RCR, - MCF_RCM_RCR_SOFTRST | MCF_RCM_RCR_FRCRSTOUT); + MCF_RCM_RCR_SOFTRST | MCF_RCM_RCR_FRCRSTOUT); return 0; }; #if defined(CONFIG_WATCHDOG) -void watchdog_reset (void) +void watchdog_reset(void) { mbar_writeShort(MCF_WTM_WSR, 0x5555); mbar_writeShort(MCF_WTM_WSR, 0xAAAA); } -int watchdog_disable (void) +int watchdog_disable(void) { mbar_writeShort(MCF_WTM_WCR, 0); return (0); } -int watchdog_init (void) +int watchdog_init(void) { mbar_writeShort(MCF_WTM_WCR, MCF_WTM_WCR_EN); return (0); } -#endif /* #ifdef CONFIG_WATCHDOG */ +#endif /* #ifdef CONFIG_WATCHDOG */ #endif #ifdef CONFIG_M5272 -int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) { - volatile wdog_t * wdp = (wdog_t *)(CFG_MBAR + MCFSIM_WRRR); +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); wdp->wdog_wrrr = 0; - udelay (1000); + udelay(1000); /* enable watchdog, set timeout to 0 and wait */ wdp->wdog_wrrr = 1; - while (1); + while (1) ; /* we don't return! */ return 0; }; -int checkcpu(void) { - ulong *dirp = (ulong *)(CFG_MBAR + MCFSIM_DIR); +int checkcpu(void) +{ + volatile sysctrl_t *sysctrl = (sysctrl_t *) (MMAP_CFG); uchar msk; - char *suf; + char *suf; - puts ("CPU: "); - msk = (*dirp > 28) & 0xf; + puts("CPU: "); + msk = (sysctrl->sc_dir > 28) & 0xf; switch (msk) { - case 0x2: suf = "1K75N"; break; - case 0x4: suf = "3K75N"; break; - default: - suf = NULL; - printf ("Freescale MCF5272 (Mask:%01x)\n", msk); - break; - } + case 0x2: + suf = "1K75N"; + break; + case 0x4: + suf = "3K75N"; + break; + default: + suf = NULL; + printf("Freescale MCF5272 (Mask:%01x)\n", msk); + break; + } if (suf) - printf ("Freescale MCF5272 %s\n", suf); + printf("Freescale MCF5272 %s\n", suf); return 0; }; #if defined(CONFIG_WATCHDOG) /* Called by macro WATCHDOG_RESET */ -void watchdog_reset (void) +void watchdog_reset(void) { - volatile immap_t * regp = (volatile immap_t *)CFG_MBAR; - regp->wdog_reg.wdog_wcr = 0; + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); + wdt->wdog_wcr = 0; } -int watchdog_disable (void) +int watchdog_disable(void) { - volatile immap_t *regp = (volatile immap_t *)CFG_MBAR; + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); - regp->wdog_reg.wdog_wcr = 0; /* reset watchdog counter */ - regp->wdog_reg.wdog_wirr = 0; /* disable watchdog interrupt */ - regp->wdog_reg.wdog_wrrr = 0; /* disable watchdog timer */ + wdt->wdog_wcr = 0; /* reset watchdog counter */ + wdt->wdog_wirr = 0; /* disable watchdog interrupt */ + wdt->wdog_wrrr = 0; /* disable watchdog timer */ - puts ("WATCHDOG:disabled\n"); + puts("WATCHDOG:disabled\n"); return (0); } -int watchdog_init (void) +int watchdog_init(void) { - volatile immap_t *regp = (volatile immap_t *)CFG_MBAR; + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); - regp->wdog_reg.wdog_wirr = 0; /* disable watchdog interrupt */ + wdt->wdog_wirr = 0; /* disable watchdog interrupt */ /* set timeout and enable watchdog */ - regp->wdog_reg.wdog_wrrr = ((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1; - regp->wdog_reg.wdog_wcr = 0; /* reset watchdog counter */ + wdt->wdog_wrrr = + ((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1; + wdt->wdog_wcr = 0; /* reset watchdog counter */ - puts ("WATCHDOG:enabled\n"); + puts("WATCHDOG:enabled\n"); return (0); } -#endif /* #ifdef CONFIG_WATCHDOG */ - -#endif /* #ifdef CONFIG_M5272 */ +#endif /* #ifdef CONFIG_WATCHDOG */ +#endif /* #ifdef CONFIG_M5272 */ #ifdef CONFIG_M5282 -int checkcpu (void) +int checkcpu(void) { unsigned char resetsource = MCFRESET_RSR; - printf ("CPU: Freescale Coldfire MCF5282 (PIN: %2.2x REV: %2.2x)\n", - MCFCCM_CIR>>8,MCFCCM_CIR & MCFCCM_CIR_PRN_MASK); - printf ("Reset:%s%s%s%s%s%s%s\n", - (resetsource & MCFRESET_RSR_LOL) ? " Loss of Lock" : "", - (resetsource & MCFRESET_RSR_LOC) ? " Loss of Clock" : "", - (resetsource & MCFRESET_RSR_EXT) ? " External" : "", - (resetsource & MCFRESET_RSR_POR) ? " Power On" : "", - (resetsource & MCFRESET_RSR_WDR) ? " Watchdog" : "", - (resetsource & MCFRESET_RSR_SOFT) ? " Software" : "", - (resetsource & MCFRESET_RSR_LVD) ? " Low Voltage" : "" - ); + printf("CPU: Freescale Coldfire MCF5282 (PIN: %2.2x REV: %2.2x)\n", + MCFCCM_CIR >> 8, MCFCCM_CIR & MCFCCM_CIR_PRN_MASK); + printf("Reset:%s%s%s%s%s%s%s\n", + (resetsource & MCFRESET_RSR_LOL) ? " Loss of Lock" : "", + (resetsource & MCFRESET_RSR_LOC) ? " Loss of Clock" : "", + (resetsource & MCFRESET_RSR_EXT) ? " External" : "", + (resetsource & MCFRESET_RSR_POR) ? " Power On" : "", + (resetsource & MCFRESET_RSR_WDR) ? " Watchdog" : "", + (resetsource & MCFRESET_RSR_SOFT) ? " Software" : "", + (resetsource & MCFRESET_RSR_LVD) ? " Low Voltage" : ""); return 0; } -int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) { MCFRESET_RCR = MCFRESET_RCR_SOFTRST; return 0; }; #endif -#ifdef CONFIG_M5249 /* test-only: todo... */ -int checkcpu (void) +#ifdef CONFIG_M5249 /* test-only: todo... */ +int checkcpu(void) { char buf[32]; - printf ("CPU: Freescale Coldfire MCF5249 at %s MHz\n", strmhz(buf, CFG_CLK)); + printf("CPU: Freescale Coldfire MCF5249 at %s MHz\n", + strmhz(buf, CFG_CLK)); return 0; } -int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) { +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ /* enable watchdog, set timeout to 0 and wait */ mbar_writeByte(MCFSIM_SYPCR, 0xc0); - while (1); + while (1) ; /* we don't return! */ return 0; diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 1748ea9..5736d0f 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -27,28 +27,10 @@ #include #include - -#ifdef CONFIG_M5271 -#include -#include -#endif - -#ifdef CONFIG_M5272 -#include -#include -#endif - -#ifdef CONFIG_M5282 -#include -#include -#endif - -#ifdef CONFIG_M5249 -#include -#endif +#include #if defined(CONFIG_M5271) -void cpu_init_f (void) +void cpu_init_f(void) { #ifndef CONFIG_WATCHDOG /* Disable the watchdog if we aren't using it */ @@ -58,25 +40,35 @@ void cpu_init_f (void) /* Set clockspeed to 100MHz */ mbar_writeShort(MCF_FMPLL_SYNCR, MCF_FMPLL_SYNCR_MFD(0) | MCF_FMPLL_SYNCR_RFD(0)); - while (!mbar_readByte(MCF_FMPLL_SYNSR) & MCF_FMPLL_SYNSR_LOCK); - - /* Enable UART pins */ - mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD | - MCF_GPIO_PAR_UART_U0RXD | - MCF_GPIO_PAR_UART_U1RXD_UART1 | - MCF_GPIO_PAR_UART_U1TXD_UART1); - - /* Enable Ethernet pins */ - mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C); + while (!mbar_readByte(MCF_FMPLL_SYNSR) & MCF_FMPLL_SYNSR_LOCK) ; } /* * initialize higher level parts of CPU like timers */ -int cpu_init_r (void) +int cpu_init_r(void) { return (0); } + +void uart_port_conf(void) +{ + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD | + MCF_GPIO_PAR_UART_U0RXD); + break; + case 1: + mbar_writeShort(MCF_GPIO_PAR_UART, + MCF_GPIO_PAR_UART_U1RXD_UART1 | + MCF_GPIO_PAR_UART_U1TXD_UART1); + break; + case 2: + mbar_writeShort(MCF_GPIO_PAR_UART, 0x3000); + break; + } +} #endif #if defined(CONFIG_M5272) @@ -87,69 +79,68 @@ int cpu_init_r (void) * initialize a bunch of registers, * initialize the UPM's */ -void cpu_init_f (void) +void cpu_init_f(void) { /* if we come from RAM we assume the CPU is * already initialized. */ #ifndef CONFIG_MONITOR_IS_IN_RAM - volatile immap_t *regp = (immap_t *)CFG_MBAR; - - volatile unsigned char *mbar; - mbar = (volatile unsigned char *) CFG_MBAR; + volatile sysctrl_t *sysctrl = (sysctrl_t *) (CFG_MBAR); + volatile gpio_t *gpio = (gpio_t *) (MMAP_GPIO); + volatile csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS); - regp->sysctrl_reg.sc_scr = CFG_SCR; - regp->sysctrl_reg.sc_spr = CFG_SPR; + sysctrl->sc_scr = CFG_SCR; + sysctrl->sc_spr = CFG_SPR; /* Setup Ports: */ - regp->gpio_reg.gpio_pacnt = CFG_PACNT; - regp->gpio_reg.gpio_paddr = CFG_PADDR; - regp->gpio_reg.gpio_padat = CFG_PADAT; - regp->gpio_reg.gpio_pbcnt = CFG_PBCNT; - regp->gpio_reg.gpio_pbddr = CFG_PBDDR; - regp->gpio_reg.gpio_pbdat = CFG_PBDAT; - regp->gpio_reg.gpio_pdcnt = CFG_PDCNT; + gpio->gpio_pacnt = CFG_PACNT; + gpio->gpio_paddr = CFG_PADDR; + gpio->gpio_padat = CFG_PADAT; + gpio->gpio_pbcnt = CFG_PBCNT; + gpio->gpio_pbddr = CFG_PBDDR; + gpio->gpio_pbdat = CFG_PBDAT; + gpio->gpio_pdcnt = CFG_PDCNT; /* Memory Controller: */ - regp->csctrl_reg.cs_br0 = CFG_BR0_PRELIM; - regp->csctrl_reg.cs_or0 = CFG_OR0_PRELIM; + csctrl->cs_br0 = CFG_BR0_PRELIM; + csctrl->cs_or0 = CFG_OR0_PRELIM; #if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM)) - regp->csctrl_reg.cs_br1 = CFG_BR1_PRELIM; - regp->csctrl_reg.cs_or1 = CFG_OR1_PRELIM; + csctrl->cs_br1 = CFG_BR1_PRELIM; + csctrl->cs_or1 = CFG_OR1_PRELIM; #endif #if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) - regp->csctrl_reg.cs_br2 = CFG_BR2_PRELIM; - regp->csctrl_reg.cs_or2 = CFG_OR2_PRELIM; + csctrl->cs_br2 = CFG_BR2_PRELIM; + csctrl->cs_or2 = CFG_OR2_PRELIM; #endif #if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM) - regp->csctrl_reg.cs_br3 = CFG_BR3_PRELIM; - regp->csctrl_reg.cs_or3 = CFG_OR3_PRELIM; + csctrl->cs_br3 = CFG_BR3_PRELIM; + csctrl->cs_or3 = CFG_OR3_PRELIM; #endif #if defined(CFG_OR4_PRELIM) && defined(CFG_BR4_PRELIM) - regp->csctrl_reg.cs_br4 = CFG_BR4_PRELIM; - regp->csctrl_reg.cs_or4 = CFG_OR4_PRELIM; + csctrl->cs_br4 = CFG_BR4_PRELIM; + csctrl->cs_or4 = CFG_OR4_PRELIM; #endif #if defined(CFG_OR5_PRELIM) && defined(CFG_BR5_PRELIM) - regp->csctrl_reg.cs_br5 = CFG_BR5_PRELIM; - regp->csctrl_reg.cs_or5 = CFG_OR5_PRELIM; + csctrl->cs_br5 = CFG_BR5_PRELIM; + csctrl->cs_or5 = CFG_OR5_PRELIM; #endif #if defined(CFG_OR6_PRELIM) && defined(CFG_BR6_PRELIM) - regp->csctrl_reg.cs_br6 = CFG_BR6_PRELIM; - regp->csctrl_reg.cs_or6 = CFG_OR6_PRELIM; + csctrl->cs_br6 = CFG_BR6_PRELIM; + csctrl->cs_or6 = CFG_OR6_PRELIM; #endif #if defined(CFG_OR7_PRELIM) && defined(CFG_BR7_PRELIM) - regp->csctrl_reg.cs_br7 = CFG_BR7_PRELIM; - regp->csctrl_reg.cs_or7 = CFG_OR7_PRELIM; + csctrl->cs_br7 = CFG_BR7_PRELIM; + csctrl->cs_or7 = CFG_OR7_PRELIM; #endif -#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ +#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ /* enable instruction cache now */ icache_enable(); @@ -159,14 +150,30 @@ void cpu_init_f (void) /* * initialize higher level parts of CPU like timers */ -int cpu_init_r (void) +int cpu_init_r(void) { return (0); } -#endif /* #if defined(CONFIG_M5272) */ +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK); + gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD); + break; + case 1: + gpio->gpio_pdcnt &= ~(GPIO_PDCNT_PD1MSK | GPIO_PDCNT_PD4MSK); + gpio->gpio_pdcnt |= (GPIO_PDCNT_URT1_RXD | GPIO_PDCNT_URT1_TXD); + break; + } +} +#endif /* #if defined(CONFIG_M5272) */ -#ifdef CONFIG_M5282 +#if defined(CONFIG_M5282) /* * Breath some life into the CPU... * @@ -174,7 +181,7 @@ int cpu_init_r (void) * initialize a bunch of registers, * initialize the UPM's */ -void cpu_init_f (void) +void cpu_init_f(void) { #ifndef CONFIG_WATCHDOG /* disable watchdog if we aren't using it */ @@ -183,7 +190,11 @@ void cpu_init_f (void) #ifndef CONFIG_MONITOR_IS_IN_RAM /* Set speed /PLL */ - MCFCLOCK_SYNCR = MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD); + MCFCLOCK_SYNCR = + MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD); + while (!(MCFCLOCK_SYNSR & MCFCLOCK_SYNSR_LOCK)) ; + + MCFGPIO_PBCDPAR = 0xc0; /* Set up the GPIO ports */ #ifdef CFG_PEPAR @@ -228,29 +239,28 @@ void cpu_init_f (void) defined(CFG_CS0_WIDTH) & defined(CFG_CS0_RO) & \ defined(CFG_CS0_WS) - MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF; - - #if (CFG_CS0_WIDTH == 8) - #define CFG_CS0_PS MCFCSM_CSCR_PS_8 - #elif (CFG_CS0_WIDTH == 16) - #define CFG_CS0_PS MCFCSM_CSCR_PS_16 - #elif (CFG_CS0_WIDTH == 32) - #define CFG_CS0_PS MCFCSM_CSCR_PS_32 - #else - #error "CFG_CS0_WIDTH: Fault - wrong bus with for CS0" - #endif - MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CFG_CS0_WS) - |CFG_CS0_PS - |MCFCSM_CSCR_AA; - - #if (CFG_CS0_RO != 0) - MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1) - |MCFCSM_CSMR_WP|MCFCSM_CSMR_V; - #else - MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1)|MCFCSM_CSMR_V; - #endif + MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF; + +#if (CFG_CS0_WIDTH == 8) +#define CFG_CS0_PS MCFCSM_CSCR_PS_8 +#elif (CFG_CS0_WIDTH == 16) +#define CFG_CS0_PS MCFCSM_CSCR_PS_16 +#elif (CFG_CS0_WIDTH == 32) +#define CFG_CS0_PS MCFCSM_CSCR_PS_32 #else - #waring "Chip Select 0 are not initialized/used" +#error "CFG_CS0_WIDTH: Fault - wrong bus with for CS0" +#endif + MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CFG_CS0_WS) + | CFG_CS0_PS | MCFCSM_CSCR_AA; + +#if (CFG_CS0_RO != 0) + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1) + | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; +#else + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1) | MCFCSM_CSMR_V; +#endif +#else +#waring "Chip Select 0 are not initialized/used" #endif #if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \ @@ -259,29 +269,27 @@ void cpu_init_f (void) MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF; - #if (CFG_CS1_WIDTH == 8) - #define CFG_CS1_PS MCFCSM_CSCR_PS_8 - #elif (CFG_CS1_WIDTH == 16) - #define CFG_CS1_PS MCFCSM_CSCR_PS_16 - #elif (CFG_CS1_WIDTH == 32) - #define CFG_CS1_PS MCFCSM_CSCR_PS_32 - #else - #error "CFG_CS1_WIDTH: Fault - wrong bus with for CS1" - #endif - MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CFG_CS1_WS) - |CFG_CS1_PS - |MCFCSM_CSCR_AA; - - #if (CFG_CS1_RO != 0) - MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1) - |MCFCSM_CSMR_WP - |MCFCSM_CSMR_V; - #else - MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1) - |MCFCSM_CSMR_V; - #endif +#if (CFG_CS1_WIDTH == 8) +#define CFG_CS1_PS MCFCSM_CSCR_PS_8 +#elif (CFG_CS1_WIDTH == 16) +#define CFG_CS1_PS MCFCSM_CSCR_PS_16 +#elif (CFG_CS1_WIDTH == 32) +#define CFG_CS1_PS MCFCSM_CSCR_PS_32 +#else +#error "CFG_CS1_WIDTH: Fault - wrong bus with for CS1" +#endif + MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CFG_CS1_WS) + | CFG_CS1_PS | MCFCSM_CSCR_AA; + +#if (CFG_CS1_RO != 0) + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1) + | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; +#else + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1) + | MCFCSM_CSMR_V; +#endif #else - #warning "Chip Select 1 are not initialized/used" +#warning "Chip Select 1 are not initialized/used" #endif #if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \ @@ -290,29 +298,27 @@ void cpu_init_f (void) MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF; - #if (CFG_CS2_WIDTH == 8) - #define CFG_CS2_PS MCFCSM_CSCR_PS_8 - #elif (CFG_CS2_WIDTH == 16) - #define CFG_CS2_PS MCFCSM_CSCR_PS_16 - #elif (CFG_CS2_WIDTH == 32) - #define CFG_CS2_PS MCFCSM_CSCR_PS_32 - #else - #error "CFG_CS2_WIDTH: Fault - wrong bus with for CS2" - #endif - MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CFG_CS2_WS) - |CFG_CS2_PS - |MCFCSM_CSCR_AA; - - #if (CFG_CS2_RO != 0) - MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1) - |MCFCSM_CSMR_WP - |MCFCSM_CSMR_V; - #else - MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1) - |MCFCSM_CSMR_V; - #endif +#if (CFG_CS2_WIDTH == 8) +#define CFG_CS2_PS MCFCSM_CSCR_PS_8 +#elif (CFG_CS2_WIDTH == 16) +#define CFG_CS2_PS MCFCSM_CSCR_PS_16 +#elif (CFG_CS2_WIDTH == 32) +#define CFG_CS2_PS MCFCSM_CSCR_PS_32 #else - #warning "Chip Select 2 are not initialized/used" +#error "CFG_CS2_WIDTH: Fault - wrong bus with for CS2" +#endif + MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CFG_CS2_WS) + | CFG_CS2_PS | MCFCSM_CSCR_AA; + +#if (CFG_CS2_RO != 0) + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1) + | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; +#else + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1) + | MCFCSM_CSMR_V; +#endif +#else +#warning "Chip Select 2 are not initialized/used" #endif #if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \ @@ -321,32 +327,30 @@ void cpu_init_f (void) MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF; - #if (CFG_CS3_WIDTH == 8) - #define CFG_CS3_PS MCFCSM_CSCR_PS_8 - #elif (CFG_CS3_WIDTH == 16) - #define CFG_CS3_PS MCFCSM_CSCR_PS_16 - #elif (CFG_CS3_WIDTH == 32) - #define CFG_CS3_PS MCFCSM_CSCR_PS_32 - #else - #error "CFG_CS3_WIDTH: Fault - wrong bus with for CS1" - #endif - MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CFG_CS3_WS) - |CFG_CS3_PS - |MCFCSM_CSCR_AA; - - #if (CFG_CS3_RO != 0) - MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1) - |MCFCSM_CSMR_WP - |MCFCSM_CSMR_V; - #else - MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1) - |MCFCSM_CSMR_V; - #endif +#if (CFG_CS3_WIDTH == 8) +#define CFG_CS3_PS MCFCSM_CSCR_PS_8 +#elif (CFG_CS3_WIDTH == 16) +#define CFG_CS3_PS MCFCSM_CSCR_PS_16 +#elif (CFG_CS3_WIDTH == 32) +#define CFG_CS3_PS MCFCSM_CSCR_PS_32 +#else +#error "CFG_CS3_WIDTH: Fault - wrong bus with for CS1" +#endif + MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CFG_CS3_WS) + | CFG_CS3_PS | MCFCSM_CSCR_AA; + +#if (CFG_CS3_RO != 0) + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1) + | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; +#else + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1) + | MCFCSM_CSMR_V; +#endif #else - #warning "Chip Select 3 are not initialized/used" +#warning "Chip Select 3 are not initialized/used" #endif -#endif /* CONFIG_MONITOR_IS_IN_RAM */ +#endif /* CONFIG_MONITOR_IS_IN_RAM */ /* defer enabling cache until boot (see do_go) */ /* icache_enable(); */ @@ -355,10 +359,29 @@ void cpu_init_f (void) /* * initialize higher level parts of CPU like timers */ -int cpu_init_r (void) +int cpu_init_r(void) { return (0); } + +void uart_port_conf(void) +{ + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + MCFGPIO_PUAPAR &= 0xFc; + MCFGPIO_PUAPAR |= 0x03; + break; + case 1: + MCFGPIO_PUAPAR &= 0xF3; + MCFGPIO_PUAPAR |= 0x0C; + break; + case 2: + MCFGPIO_PASPAR &= 0xFF0F; + MCFGPIO_PASPAR |= 0x00A0; + break; + } +} #endif #if defined(CONFIG_M5249) @@ -369,7 +392,7 @@ int cpu_init_r (void) * initialize a bunch of registers, * initialize the UPM's */ -void cpu_init_f (void) +void cpu_init_f(void) { #ifndef CFG_PLL_BYPASS /* @@ -379,23 +402,23 @@ void cpu_init_f (void) volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); unsigned long pllcr; #ifdef CFG_FAST_CLK - pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ + pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ #else - pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ + pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ #endif - cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ - mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */ - mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */ - pllcr ^= 0x00000001; /* Set pll bypass to 1 */ - mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ - udelay(0x20); /* Wait for a lock ... */ -#endif /* #ifndef CFG_PLL_BYPASS */ + cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ + mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */ + mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */ + pllcr ^= 0x00000001; /* Set pll bypass to 1 */ + mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ + udelay(0x20); /* Wait for a lock ... */ +#endif /* #ifndef CFG_PLL_BYPASS */ /* * NOTE: by setting the GPIO_FUNCTION registers, we ensure that the UART pins - * (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins - * which is their primary function. - * ~Jeremy + * (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins + * which is their primary function. + * ~Jeremy */ mbar2_writeLong(MCFSIM_GPIO_FUNC, CFG_GPIO_FUNC); mbar2_writeLong(MCFSIM_GPIO1_FUNC, CFG_GPIO1_FUNC); @@ -411,7 +434,7 @@ void cpu_init_f (void) * ~Jeremy * */ - mbar_writeByte(MCFSIM_MPARK, 0x30); /* 5249 Internal Core takes priority over DMA */ + mbar_writeByte(MCFSIM_MPARK, 0x30); /* 5249 Internal Core takes priority over DMA */ mbar_writeByte(MCFSIM_SYPCR, 0x00); mbar_writeByte(MCFSIM_SWIVR, 0x0f); mbar_writeByte(MCFSIM_SWSR, 0x00); @@ -431,7 +454,7 @@ void cpu_init_f (void) mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080); mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */ mbar2_writeByte(MCFSIM_SPURVEC, 0x00); - mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); /* Enable a 1 cycle pre-drive cycle on CS1 */ + mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); /* Enable a 1 cycle pre-drive cycle on CS1 */ /* Setup interrupt priorities for gpio7 */ /* mbar2_writeLong(MCFSIM_INTLEV5, 0x70000000); */ @@ -459,8 +482,19 @@ void cpu_init_f (void) /* * initialize higher level parts of CPU like timers */ -int cpu_init_r (void) +int cpu_init_r(void) { return (0); } -#endif /* #if defined(CONFIG_M5249) */ + +void uart_port_conf(void) +{ + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + break; + case 1: + break; + } +} +#endif /* #if defined(CONFIG_M5249) */ diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c deleted file mode 100644 index ef9c798..0000000 --- a/cpu/mcf52x2/fec.c +++ /dev/null @@ -1,605 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#ifdef CONFIG_M5271 -#include -#include -#endif - -#ifdef CONFIG_M5272 -#include -#include -#endif - -#ifdef CONFIG_M5282 -#include -#include -#endif - -#include -#include - -#ifdef CONFIG_M5272 -#define FEC_ADDR (CFG_MBAR + 0x840) -#endif -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) -#define FEC_ADDR (CFG_MBAR + 0x1000) -#endif - -#undef ET_DEBUG -#undef MII_DEBUG - -#if defined(CONFIG_CMD_NET) && defined(FEC_ENET) - -#ifdef CFG_DISCOVER_PHY -#include -static void mii_discover_phy (void); -#endif - -/* Ethernet Transmit and Receive Buffers */ -#define DBUF_LENGTH 1520 - -#define TX_BUF_CNT 2 - -#define TOUT_LOOP 100 - -#define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 -#define PKT_MAXBLR_SIZE 1520 - - -static char txbuf[DBUF_LENGTH]; - -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ - -/* - * FEC Ethernet Tx and Rx buffer descriptors allocated at the - * immr->udata_bd address on Dual-Port RAM - * Provide for Double Buffering - */ - -typedef volatile struct CommonBufferDescriptor { - cbd_t rxbd[PKTBUFSRX]; /* Rx BD */ - cbd_t txbd[TX_BUF_CNT]; /* Tx BD */ -} RTXBD; - -static RTXBD *rtx = NULL; - -int eth_send (volatile void *packet, int length) -{ - int j, rc; - volatile fec_t *fecp = (fec_t *) (FEC_ADDR); - - /* section 16.9.23.3 - * Wait for ready - */ - j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) - && (j < TOUT_LOOP)) { - udelay (1); - j++; - } - if (j >= TOUT_LOOP) { - printf ("TX not ready\n"); - } - - rtx->txbd[txIdx].cbd_bufaddr = (uint) packet; - rtx->txbd[txIdx].cbd_datlen = length; - rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST; - - /* Activate transmit Buffer Descriptor polling */ - fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */ - - j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) - && (j < TOUT_LOOP)) { - udelay (1); - j++; - } - if (j >= TOUT_LOOP) { - printf ("TX timeout\n"); - } -#ifdef ET_DEBUG - printf ("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", - __FILE__, __LINE__, __FUNCTION__, j, rtx->txbd[txIdx].cbd_sc, - (rtx->txbd[txIdx].cbd_sc & 0x003C) >> 2); -#endif - - /* return only status bits */ ; - rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS); - - txIdx = (txIdx + 1) % TX_BUF_CNT; - - return rc; -} - -int eth_rx (void) -{ - int length; - volatile fec_t *fecp = (fec_t *) FEC_ADDR; - - for (;;) { - /* section 16.9.23.2 */ - if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { - length = -1; - break; /* nothing received - leave for() loop */ - } - - length = rtx->rxbd[rxIdx].cbd_datlen; - - if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) { -#ifdef ET_DEBUG - printf ("%s[%d] err: %x\n", - __FUNCTION__, __LINE__, - rtx->rxbd[rxIdx].cbd_sc); -#endif - } else { - /* Pass the packet up to the protocol layers. */ - NetReceive (NetRxPackets[rxIdx], length - 4); - } - - /* Give the buffer back to the FEC. */ - rtx->rxbd[rxIdx].cbd_datlen = 0; - - /* wrap around buffer index when necessary */ - if ((rxIdx + 1) >= PKTBUFSRX) { - rtx->rxbd[PKTBUFSRX - 1].cbd_sc = - (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); - rxIdx = 0; - } else { - rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; - rxIdx++; - } - - /* Try to fill Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ - } - - return length; -} - -/************************************************************** - * - * FEC Ethernet Initialization Routine - * - *************************************************************/ -#define FEC_ECNTRL_ETHER_EN 0x00000002 -#define FEC_ECNTRL_RESET 0x00000001 - -#define FEC_RCNTRL_BC_REJ 0x00000010 -#define FEC_RCNTRL_PROM 0x00000008 -#define FEC_RCNTRL_MII_MODE 0x00000004 -#define FEC_RCNTRL_DRT 0x00000002 -#define FEC_RCNTRL_LOOP 0x00000001 - -#define FEC_TCNTRL_FDEN 0x00000004 -#define FEC_TCNTRL_HBC 0x00000002 -#define FEC_TCNTRL_GTS 0x00000001 - -#define FEC_RESET_DELAY 50000 - -int eth_init (bd_t * bd) -{ -#ifndef CFG_ENET_BD_BASE - DECLARE_GLOBAL_DATA_PTR; -#endif - int i; - volatile fec_t *fecp = (fec_t *) (FEC_ADDR); - - /* Whack a reset. - * A delay is required between a reset of the FEC block and - * initialization of other FEC registers because the reset takes - * some time to complete. If you don't delay, subsequent writes - * to FEC registers might get killed by the reset routine which is - * still in progress. - */ - fecp->fec_ecntrl = FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay (1); - } - if (i == FEC_RESET_DELAY) { - printf ("FEC_RESET_DELAY timeout\n"); - return 0; - } - - /* We use strictly polling mode only - */ - fecp->fec_imask = 0; - - /* Clear any pending interrupt */ - fecp->fec_ievent = 0xffffffff; - - /* Set station address */ -#define ea bd->bi_enetaddr - fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | - (ea[2] << 8) | (ea[3]); - fecp->fec_addr_high = (ea[4] << 24) | (ea[5] << 16); -#ifdef ET_DEBUG - printf ("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n", - ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]); -#endif -#undef ea - -#ifdef CONFIG_M5271 - /* Clear multicast address hash table - */ - fecp->fec_ghash_table_high = 0; - fecp->fec_ghash_table_low = 0; - - /* Clear individual address hash table - */ - fecp->fec_ihash_table_high = 0; - fecp->fec_ihash_table_low = 0; -#else - /* Clear multicast address hash table - */ -#ifdef CONFIG_M5282 - fecp->fec_ihash_table_high = 0; - fecp->fec_ihash_table_low = 0; -#else - fecp->fec_hash_table_high = 0; - fecp->fec_hash_table_low = 0; -#endif -#endif - - /* Set maximum receive buffer size. - */ - fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; - - /* - * Setup Buffers and Buffer Desriptors - */ - rxIdx = 0; - txIdx = 0; - - if (!rtx) { -#ifdef CFG_ENET_BD_BASE - rtx = (RTXBD *) CFG_ENET_BD_BASE; -#else - rtx = (RTXBD *) (CFG_MONITOR_BASE+gd->reloc_off - - (((PKTBUFSRX+TX_BUF_CNT)*+sizeof(cbd_t) - +0xFF) - & ~0xFF) - ); - debug("set ENET_DB_BASE to %lX\n",(long) rtx); -#endif - } - - /* - * Setup Receiver Buffer Descriptors (13.14.24.18) - * Settings: - * Empty, Wrap - */ - for (i = 0; i < PKTBUFSRX; i++) { - rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; - rtx->rxbd[i].cbd_datlen = 0; /* Reset */ - rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i]; - } - rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; - - /* - * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) - * Settings: - * Last, Tx CRC - */ - for (i = 0; i < TX_BUF_CNT; i++) { - rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC; - rtx->txbd[i].cbd_datlen = 0; /* Reset */ - rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]); - } - rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; - - /* Set receive and transmit descriptor base - */ - fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]); - fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]); - - /* Enable MII mode - */ - -#if 0 /* Full duplex mode */ - fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE; - fecp->fec_x_cntrl = FEC_TCNTRL_FDEN; -#else /* Half duplex mode */ - fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */ - fecp->fec_r_cntrl |= FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT; - fecp->fec_x_cntrl = 0; -#endif - /* Set MII speed */ - fecp->fec_mii_speed = (((CFG_CLK / 2) / (2500000 / 10)) + 5) / 10; - fecp->fec_mii_speed *= 2; - - /* Configure port B for MII. - */ - /* port initialization was already made in cpu_init_f() */ - - /* Now enable the transmit and receive processing - */ - fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN; - -#ifdef CFG_DISCOVER_PHY - /* wait for the PHY to wake up after reset */ - mii_discover_phy (); -#endif - - /* And last, try to fill Rx Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ - - return 1; -} - -void eth_halt (void) -{ - volatile fec_t *fecp = (fec_t *) FEC_ADDR; - - fecp->fec_ecntrl = 0; -} - - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) - -static int phyaddr = -1; /* didn't find a PHY yet */ -static uint phytype; - -/* Make MII read/write commands for the FEC. -*/ - -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18) | \ - (VAL & 0xffff)) - -/* Interrupt events/masks. -*/ -#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ -#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ -#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ -#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ -#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ -#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ -#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ -#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ -#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ -#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ - -/* PHY identification - */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ - -/* send command to phy using mii, wait for result */ -static uint mii_send (uint mii_cmd) -{ - uint mii_reply; - volatile fec_t *ep = (fec_t *) (FEC_ADDR); - - ep->fec_mii_data = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->fec_ievent & FEC_ENET_MII)); /* spin until done */ - mii_reply = ep->fec_mii_data; /* result from phy */ - ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf ("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif - -#if defined(CFG_DISCOVER_PHY) -static void mii_discover_phy (void) -{ -#define MAX_PHY_PASSES 11 - uint phyno; - int pass; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay (10000); /* wait 10ms */ - } - for (phyno = 1; phyno < 32 && phyaddr < 0; ++phyno) { - phytype = mii_send (mk_mii_read (phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf ("PHY type 0x%x pass %d type ", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= mii_send (mk_mii_read (phyno, - PHY_PHYIDR2)); - -#ifdef ET_DEBUG - printf ("PHY @ 0x%x pass %d type ", phyno, - pass); - switch (phytype & 0xfffffff0) { - case PHY_ID_LXT970: - printf ("LXT970\n"); - break; - case PHY_ID_LXT971: - printf ("LXT971\n"); - break; - case PHY_ID_82555: - printf ("82555\n"); - break; - case PHY_ID_QS6612: - printf ("QS6612\n"); - break; - case PHY_ID_AMD79C784: - printf ("AMD79C784\n"); - break; - case PHY_ID_LSI80225B: - printf ("LSI L80225/B\n"); - break; - default: - printf ("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) { - printf ("No PHY device found.\n"); - } -} -#endif /* CFG_DISCOVER_PHY */ - -#if defined(CONFIG_CMD_MII) && !defined(CONFIG_BITBANGMII) - -static int mii_init_done = 0; - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_init (void) -{ - volatile fec_t *fecp = (fec_t *) (FEC_ADDR); - - int i; - - if (mii_init_done != 0) { - return; - } - - /* Whack a reset. - * A delay is required between a reset of the FEC block and - * initialization of other FEC registers because the reset takes - * some time to complete. If you don't delay, subsequent writes - * to FEC registers might get killed by the reset routine which is - * still in progress. - */ - - fecp->fec_ecntrl = FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay (1); - } - if (i == FEC_RESET_DELAY) { - printf ("FEC_RESET_DELAY timeout\n"); - return; - } - - /* We use strictly polling mode only - */ - fecp->fec_imask = 0; - - /* Clear any pending interrupt - */ - fecp->fec_ievent = 0xffffffff; - - /* Set MII speed */ - fecp->fec_mii_speed = 0x0e; - - /* Configure port B for MII. - */ - /* port initialization was already made in cpu_init_f() */ - - /* Now enable the transmit and receive processing */ - fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN; - - mii_init_done = 1; -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcf52x2_miiphy_read (char *devname, unsigned char addr, - unsigned char reg, unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send (mk_mii_read (addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf ("0x%04x\n", *value); -#endif - - return 0; -} - -int mcf52x2_miiphy_write (char *devname, unsigned char addr, - unsigned char reg, unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send (mk_mii_write (addr, reg, value)); - -#ifdef MII_DEBUG - printf ("0x%04x\n", value); -#endif - - return 0; -} -#endif -#endif - -int mcf52x2_miiphy_initialize(bd_t *bis) -{ -#if defined(CONFIG_CMD_NET) && defined(FEC_ENET) -#if defined(CONFIG_CMD_MII) && !defined(CONFIG_BITBANGMII) - miiphy_register("mcf52x2phy", mcf52x2_miiphy_read, mcf52x2_miiphy_write); -#endif -#endif - return 0; -} diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c index 116747a..d9a35bb 100644 --- a/cpu/mcf52x2/interrupts.c +++ b/cpu/mcf52x2/interrupts.c @@ -26,168 +26,77 @@ #include #include #include - -#ifdef CONFIG_M5271 -#include -#include -#endif +#include #ifdef CONFIG_M5272 -#include -#include -#endif - -#ifdef CONFIG_M5282 -#include -#include -#endif - -#ifdef CONFIG_M5249 -#include -#endif - - -#define NR_IRQS 31 - -/* - * Interrupt vector functions. - */ -struct interrupt_action { - interrupt_handler_t *handler; - void *arg; -}; - -static struct interrupt_action irq_vecs[NR_IRQS]; - -static __inline__ unsigned short get_sr (void) -{ - unsigned short sr; - - asm volatile ("move.w %%sr,%0":"=r" (sr):); - - return sr; -} - -static __inline__ void set_sr (unsigned short sr) +int interrupt_init(void) { - asm volatile ("move.w %0,%%sr"::"r" (sr)); -} + volatile intctrl_t *intp = (intctrl_t *) (MMAP_INTC); -/************************************************************************/ -/* - * Install and free an interrupt handler - */ -void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg) -{ -#ifdef CONFIG_M5272 - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); -#endif - int vec_base = 0; - -#ifdef CONFIG_M5272 - vec_base = intp->int_pivr & 0xe0; -#endif - - if ((vec < vec_base) || (vec > vec_base + NR_IRQS)) { - printf ("irq_install_handler: wrong interrupt vector %d\n", - vec); - return; - } - - irq_vecs[vec - vec_base].handler = handler; - irq_vecs[vec - vec_base].arg = arg; -} - -void irq_free_handler (int vec) -{ -#ifdef CONFIG_M5272 - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); -#endif - int vec_base = 0; - -#ifdef CONFIG_M5272 - vec_base = intp->int_pivr & 0xe0; -#endif + /* disable all external interrupts */ + intp->int_icr1 = 0x88888888; + intp->int_icr2 = 0x88888888; + intp->int_icr3 = 0x88888888; + intp->int_icr4 = 0x88888888; + intp->int_pitr = 0x00000000; + /* initialize vector register */ + intp->int_pivr = 0x40; - if ((vec < vec_base) || (vec > vec_base + NR_IRQS)) { - return; - } + enable_interrupts(); - irq_vecs[vec - vec_base].handler = NULL; - irq_vecs[vec - vec_base].arg = NULL; + return 0; } -void enable_interrupts (void) +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) { - unsigned short sr; + volatile intctrl_t *intp = (intctrl_t *) (CFG_INTR_BASE); - sr = get_sr (); - set_sr (sr & ~0x0700); + intp->int_icr1 &= ~INT_ICR1_TMR3MASK; + intp->int_icr1 |= CFG_TMRINTR_PRI; } +#endif /* CONFIG_MCFTMR */ +#endif /* CONFIG_M5272 */ -int disable_interrupts (void) +#if defined(CONFIG_M5282) || defined(CONFIG_M5271) +int interrupt_init(void) { - unsigned short sr; + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); - sr = get_sr (); - set_sr (sr | 0x0700); + /* Make sure all interrupts are disabled */ + intp->imrl0 |= 0x1; - return ((sr & 0x0700) == 0); /* return TRUE, if interrupts were enabled before */ + enable_interrupts(); + return 0; } -void int_handler (struct pt_regs *fp) +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) { -#ifdef CONFIG_M5272 - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); -#endif - int vec, vec_base = 0; - - vec = (fp->vector >> 2) & 0xff; -#ifdef CONFIG_M5272 - vec_base = intp->int_pivr & 0xe0; -#endif + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); - if (irq_vecs[vec - vec_base].handler != NULL) { - irq_vecs[vec - - vec_base].handler (irq_vecs[vec - vec_base].arg); - } else { - printf ("\nBogus External Interrupt Vector %d\n", vec); - } + intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + intp->imrl0 &= ~0xFFFFFFFE; + intp->imrl0 &= ~CFG_TMRINTR_MASK; } +#endif /* CONFIG_MCFTMR */ +#endif /* CONFIG_M5282 | CONFIG_M5271 */ - -#ifdef CONFIG_M5272 -int interrupt_init (void) +#ifdef CONFIG_M5249 +int interrupt_init(void) { - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); - - /* disable all external interrupts */ - intp->int_icr1 = 0x88888888; - intp->int_icr2 = 0x88888888; - intp->int_icr3 = 0x88888888; - intp->int_icr4 = 0x88888888; - intp->int_pitr = 0x00000000; - /* initialize vector register */ - intp->int_pivr = 0x40; - - enable_interrupts (); + enable_interrupts(); return 0; } -#endif -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) -int interrupt_init (void) -{ - return 0; -} -#endif - -#ifdef CONFIG_M5249 -int interrupt_init (void) +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) { - enable_interrupts (); - - return 0; + mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400); + mbar_writeByte(MCFSIM_TIMER2ICR, + MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | + MCFSIM_ICR_PRI3); } -#endif +#endif /* CONFIG_MCFTMR */ +#endif /* CONFIG_M5249 */ diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c deleted file mode 100644 index 8be09e3..0000000 --- a/cpu/mcf52x2/serial.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#include - -#ifdef CONFIG_M5271 -#include -#endif - -#ifdef CONFIG_M5272 -#include -#endif - -#ifdef CONFIG_M5282 -#include -#endif - -#ifdef CONFIG_M5249 -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_M5249) || defined(CONFIG_M5271) -#define DoubleClock(a) ((double)(CFG_CLK/2) / 32.0 / (double)(a)) -#else -#define DoubleClock(a) ((double)(CFG_CLK) / 32.0 / (double)(a)) -#endif - -void rs_serial_setbaudrate(int port,int baudrate) -{ -#if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5271) - volatile unsigned char *uartp; -# ifndef CONFIG_M5271 - double fraction; -# endif - double clock; - - if (port == 0) - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - else - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2); - - clock = DoubleClock(baudrate); /* Set baud above */ - - uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */ - uartp[MCFUART_UBG2] = ((int)clock & 0xff); /* set lsb baud */ - -# ifndef CONFIG_M5271 - fraction = ((clock - (int)clock) * 16.0) + 0.5; - uartp[MCFUART_UFPD] = ((int)fraction & 0xf); /* set baud fraction adjust */ -# endif -#endif - -#if defined(CONFIG_M5282) - volatile unsigned char *uartp; - long clock; - - switch (port) { - case 1: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2); - break; - case 2: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3); - break; - default: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - } - - clock = (long) CFG_CLK / ((long) 32 * baudrate); /* Set baud above */ - - uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */ - uartp[MCFUART_UBG2] = ((int) clock & 0xff); /* set lsb baud */ - -#endif -}; - -void rs_serial_init (int port, int baudrate) -{ - volatile unsigned char *uartp; - - /* - * Reset UART, get it into known state... - */ - switch (port) { - case 1: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2); - break; -#if defined(CONFIG_M5282) - case 2: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3); - break; -#endif - default: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - } - - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ - - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; /* reset Error pointer */ - - /* - * Set port for CONSOLE_BAUD_RATE, 8 data bits, 1 stop bit, no parity. - */ - uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8; - uartp[MCFUART_UMR] = MCFUART_MR2_STOP1; - - /* Mask UART interrupts */ - uartp[MCFUART_UIMR] = 0; - - /* Set clock Select Register: Tx/Rx clock is timer */ - uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER; - - rs_serial_setbaudrate (port, baudrate); - - /* Enable Tx/Rx */ - uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; - - return; -} - -/****************************************************************************/ -/* - * Output a single character, using UART polled mode. - * This is used for console output. - */ - -void rs_put_char(char ch) -{ - volatile unsigned char *uartp; - int i; - - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - - for (i = 0; (i < 0x10000); i++) { - if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) - break; - } - uartp[MCFUART_UTB] = ch; - return; -} - -int rs_is_char(void) -{ - volatile unsigned char *uartp; - - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - return((uartp[MCFUART_USR] & MCFUART_USR_RXREADY) ? 1 : 0); -} - -int rs_get_char(void) -{ - volatile unsigned char *uartp; - - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - return(uartp[MCFUART_URB]); -} - -void serial_setbrg(void) { - rs_serial_setbaudrate(0,gd->bd->bi_baudrate); -} - -int serial_init(void) { - rs_serial_init(0,gd->baudrate); - return 0; -} - - -void serial_putc(const char c) { - if (c == '\n') - serial_putc ('\r'); - rs_put_char(c); -} - -void serial_puts (const char *s) { - while (*s) - serial_putc(*s++); -} - -int serial_getc(void) { - while(!rs_is_char()) - WATCHDOG_RESET(); - - return rs_get_char(); -} - -int serial_tstc() { - return rs_is_char(); -} diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 7c9a7d2..6783d4d 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -159,7 +159,7 @@ _copy_flash: _flashbar_setup: /* Initialize FLASHBAR: locate internal Flash and validate it */ - move.l #(CFG_INT_FLASH_BASE + 0x21), %d0 + move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0 movec %d0, %RAMBAR0 jmp _after_flashbar_copy.L /* Force jump to absolute address */ _flashbar_setup_end: @@ -167,7 +167,7 @@ _flashbar_setup_end: _after_flashbar_copy: #else /* Setup code to initialize FLASHBAR, if start from external Memory */ - move.l #(CFG_INT_FLASH_BASE + 0x21), %d0 + move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0 movec %d0, %RAMBAR0 #endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */ @@ -326,10 +326,10 @@ clear_bss: /* set parameters for board_init_r */ move.l %a0,-(%sp) /* dest_addr */ move.l %d0,-(%sp) /* gd */ - #if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \ - defined(CFG_HALT_BEFOR_RAM_JUMP) - halt - #endif +#if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \ + defined(CFG_HALT_BEFOR_RAM_JUMP) + halt +#endif jsr (%a1) /*------------------------------------------------------------------------------*/ @@ -356,6 +356,24 @@ _int_handler: /*------------------------------------------------------------------------------*/ /* cache functions */ +#ifdef CONFIG_M5271 + .globl icache_enable +icache_enable: + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + + move.l #0x80000200, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + nop + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts +#endif + #ifdef CONFIG_M5272 .globl icache_enable icache_enable: @@ -426,13 +444,29 @@ icache_state_access_2: .globl icache_status icache_status: icache_state_access_3: - move.l icache_state, %d0 + move.l #(icache_state), %a0 + move.l (%a0), %d0 rts .data icache_state: .long 0 /* cache is diabled on inirialization */ + .globl dcache_enable +dcache_enable: + /* dummy function */ + rts + + .globl dcache_disable +dcache_disable: + /* dummy function */ + rts + + .globl dcache_status +dcache_status: + /* dummy function */ + rts + /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 6c19059..28d371d 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -25,288 +25,12 @@ #include -#include #include #include -#ifdef CONFIG_M5271 -#include -#include -#endif - -#ifdef CONFIG_M5272 -#include -#include -#endif - -#ifdef CONFIG_M5282 -#include -#endif - -#ifdef CONFIG_M5249 -#include -#include -#endif - DECLARE_GLOBAL_DATA_PTR; static ulong timestamp; -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) -static unsigned short lastinc; -#endif - -#if defined(CONFIG_M5272) -/* - * We use timer 3 which is running with a period of 1 us - */ -void udelay(unsigned long usec) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE3); - uint start, now, tmp; - - while (usec > 0) { - if (usec > 65000) - tmp = 65000; - else - tmp = usec; - usec = usec - tmp; - - /* Set up TIMER 3 as timebase clock */ - timerp->timer_tmr = MCFTIMER_TMR_DISABLE; - timerp->timer_tcn = 0; - /* set period to 1 us */ - timerp->timer_tmr = - (((CFG_CLK / 1000000) - - 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_FREERUN | - MCFTIMER_TMR_ENABLE; - - start = now = timerp->timer_tcn; - while (now < start + tmp) - now = timerp->timer_tcn; - } -} - -void mcf_timer_interrupt(void *not_used) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE4); - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); - - /* check for timer 4 interrupts */ - if ((intp->int_isr & 0x01000000) != 0) { - return; - } - - /* reset timer */ - timerp->timer_ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF; - timestamp++; -} - -void timer_init(void) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE4); - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); - - timestamp = 0; - - /* Set up TIMER 4 as clock */ - timerp->timer_tmr = MCFTIMER_TMR_DISABLE; - - /* initialize and enable timer 4 interrupt */ - irq_install_handler(72, mcf_timer_interrupt, 0); - intp->int_icr1 |= 0x0000000d; - - timerp->timer_tcn = 0; - timerp->timer_trr = 1000; /* Interrupt every ms */ - /* set a period of 1us, set timer mode to restart and enable timer and interrupt */ - timerp->timer_tmr = - (((CFG_CLK / 1000000) - - 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_RESTART | - MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE; -} - -void reset_timer(void) -{ - timestamp = 0; -} - -ulong get_timer(ulong base) -{ - return (timestamp - base); -} - -void set_timer(ulong t) -{ - timestamp = t; -} -#endif - -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) - -void udelay(unsigned long usec) -{ - volatile unsigned short *timerp; - uint tmp; - - timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE3); - - while (usec > 0) { - if (usec > 65000) - tmp = 65000; - else - tmp = usec; - usec = usec - tmp; - - /* Set up TIMER 3 as timebase clock */ - timerp[MCFTIMER_PCSR] = MCFTIMER_PCSR_OVW; - timerp[MCFTIMER_PMR] = 0; - /* set period to 1 us */ - timerp[MCFTIMER_PCSR] = -#ifdef CONFIG_M5271 - (6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#else /* !CONFIG_M5271 */ - (5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#endif /* CONFIG_M5271 */ - - timerp[MCFTIMER_PMR] = tmp; - while (timerp[MCFTIMER_PCNTR] > 0) ; - } -} - -void timer_init(void) -{ - volatile unsigned short *timerp; - - timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4); - timestamp = 0; - - /* Set up TIMER 4 as poll clock */ - timerp[MCFTIMER_PCSR] = MCFTIMER_PCSR_OVW; - timerp[MCFTIMER_PMR] = lastinc = 0; - timerp[MCFTIMER_PCSR] = -#ifdef CONFIG_M5271 - (6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#else /* !CONFIG_M5271 */ - (5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#endif /* CONFIG_M5271 */ -} - -void set_timer(ulong t) -{ - volatile unsigned short *timerp; - - timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4); - timestamp = 0; - timerp[MCFTIMER_PMR] = lastinc = 0; -} - -ulong get_timer(ulong base) -{ - unsigned short now, diff; - volatile unsigned short *timerp; - - timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4); - now = timerp[MCFTIMER_PCNTR]; - diff = -(now - lastinc); - - timestamp += diff; - lastinc = now; - return timestamp - base; -} - -void wait_ticks(unsigned long ticks) -{ - set_timer(0); - while (get_timer(0) < ticks) ; -} -#endif - -#if defined(CONFIG_M5249) -/* - * We use timer 1 which is running with a period of 1 us - */ -void udelay(unsigned long usec) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE1); - uint start, now, tmp; - - while (usec > 0) { - if (usec > 65000) - tmp = 65000; - else - tmp = usec; - usec = usec - tmp; - - /* Set up TIMER 1 as timebase clock */ - timerp->timer_tmr = MCFTIMER_TMR_DISABLE; - timerp->timer_tcn = 0; - /* set period to 1 us */ - /* on m5249 the system clock is (cpu_clk / 2) -> divide by 2000000 */ - timerp->timer_tmr = - (((CFG_CLK / 2000000) - - 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_FREERUN | - MCFTIMER_TMR_ENABLE; - - start = now = timerp->timer_tcn; - while (now < start + tmp) - now = timerp->timer_tcn; - } -} - -void mcf_timer_interrupt(void *not_used) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE2); - - /* check for timer 2 interrupts */ - if ((mbar_readLong(MCFSIM_IPR) & 0x00000400) == 0) { - return; - } - - /* reset timer */ - timerp->timer_ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF; - timestamp++; -} - -void timer_init(void) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE2); - - timestamp = 0; - - /* Set up TIMER 2 as clock */ - timerp->timer_tmr = MCFTIMER_TMR_DISABLE; - - /* initialize and enable timer 2 interrupt */ - irq_install_handler(31, mcf_timer_interrupt, 0); - mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400); - mbar_writeByte(MCFSIM_TIMER2ICR, - MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | - MCFSIM_ICR_PRI3); - - timerp->timer_tcn = 0; - timerp->timer_trr = 1000; /* Interrupt every ms */ - /* set a period of 1us, set timer mode to restart and enable timer and interrupt */ - /* on m5249 the system clock is (cpu_clk / 2) -> divide by 2000000 */ - timerp->timer_tmr = - (((CFG_CLK / 2000000) - - 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_RESTART | - MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE; -} - -void reset_timer(void) -{ - timestamp = 0; -} - -ulong get_timer(ulong base) -{ - return (timestamp - base); -} - -void set_timer(ulong t) -{ - timestamp = t; -} -#endif #if defined(CONFIG_MCFTMR) #ifndef CFG_UDELAY_BASE -- cgit v1.1 From 56115665b4a64c10c01440c57749b265e0908fa4 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:38:15 -0500 Subject: ColdFire: MCF52x2 Header files update Signed-off-by: TsiChungLiew --- include/asm-m68k/fec.h | 44 ++- include/asm-m68k/immap.h | 91 ++++++ include/asm-m68k/immap_5249.h | 22 +- include/asm-m68k/immap_5271.h | 136 ++++----- include/asm-m68k/immap_5272.h | 689 ++++++++++++++++++------------------------ include/asm-m68k/immap_5282.h | 217 +++++++++---- include/asm-m68k/m5249.h | 205 ++++++------- include/asm-m68k/m5271.h | 105 ++++++- include/asm-m68k/m5272.h | 221 ++++++++++---- include/asm-m68k/m5282.h | 270 +++++++++++------ include/asm-m68k/mcftimer.h | 111 ------- include/asm-m68k/mcfuart.h | 217 ------------- include/asm-m68k/timer.h | 2 +- 13 files changed, 1208 insertions(+), 1122 deletions(-) delete mode 100644 include/asm-m68k/mcftimer.h delete mode 100644 include/asm-m68k/mcfuart.h diff --git a/include/asm-m68k/fec.h b/include/asm-m68k/fec.h index 9a5e7d5..344c5e1 100644 --- a/include/asm-m68k/fec.h +++ b/include/asm-m68k/fec.h @@ -121,6 +121,41 @@ struct fec_info_s { /* Register read/write struct */ typedef struct fec { +#ifdef CONFIG_M5272 + u32 ecr; /* 0x00 */ + u32 eir; /* 0x04 */ + u32 eimr; /* 0x08 */ + u32 ivsr; /* 0x0C */ + u32 rdar; /* 0x10 */ + u32 tdar; /* 0x14 */ + u8 resv1[0x28]; /* 0x18 */ + u32 mmfr; /* 0x40 */ + u32 mscr; /* 0x44 */ + u8 resv2[0x44]; /* 0x48 */ + u32 frbr; /* 0x8C */ + u32 frsr; /* 0x90 */ + u8 resv3[0x10]; /* 0x94 */ + u32 tfwr; /* 0xA4 */ + u32 res4; /* 0xA8 */ + u32 tfsr; /* 0xAC */ + u8 resv4[0x50]; /* 0xB0 */ + u32 opd; /* 0x100 - dummy */ + u32 rcr; /* 0x104 */ + u32 mibc; /* 0x108 */ + u8 resv5[0x38]; /* 0x10C */ + u32 tcr; /* 0x144 */ + u8 resv6[0x270]; /* 0x148 */ + u32 iaur; /* 0x3B8 - dummy */ + u32 ialr; /* 0x3BC - dummy */ + u32 palr; /* 0x3C0 */ + u32 paur; /* 0x3C4 */ + u32 gaur; /* 0x3C8 */ + u32 galr; /* 0x3CC */ + u32 erdsr; /* 0x3D0 */ + u32 etdsr; /* 0x3D4 */ + u32 emrbr; /* 0x3D8 */ + u8 resv12[0x74]; /* 0x18C */ +#else u8 resv0[0x4]; u32 eir; u32 eimr; @@ -157,6 +192,7 @@ typedef struct fec { u32 etdsr; u32 emrbr; u8 resv12[0x74]; +#endif u32 rmon_t_drop; u32 rmon_t_packets; @@ -304,16 +340,16 @@ typedef struct fec { #define FEC_FRSR_R_FSTART(x) (((x)&0xFF)<<2) /* Bit definitions and macros for FEC_ERDSR */ -#define FEC_ERDSR_R_DES_START(x)(((x)&0x3FFFFFFF)<<2) +#define FEC_ERDSR_R_DES_START(x) (((x)&0x3FFFFFFF)<<2) /* Bit definitions and macros for FEC_ETDSR */ -#define FEC_ETDSR_X_DES_START(x)(((x)&0x3FFFFFFF)<<2) +#define FEC_ETDSR_X_DES_START(x) (((x)&0x3FFFFFFF)<<2) /* Bit definitions and macros for FEC_EMRBR */ -#define FEC_EMRBR_R_BUF_SIZE(x) (((x)&0x7F)<<4) +#define FEC_EMRBR_R_BUF_SIZE(x) (((x)&0x7F)<<4) #define FEC_RESET_DELAY 100 -#define FEC_RX_TOUT 100 +#define FEC_RX_TOUT 100 #endif /* CONFIG_MCFFEC */ #endif /* fec_h */ diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 2555e7e..3ee7071 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -26,6 +26,97 @@ #ifndef __IMMAP_H #define __IMMAP_H +#ifdef CONFIG_M5249 +#include +#include + +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40)) + +#define CFG_INTR_BASE (MMAP_INTC) +#define CFG_NUM_IRQS (64) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRPND_REG (mbar_readLong(MCFSIM_IPR)) +#define CFG_TMRINTR_NO (31) +#define CFG_TMRINTR_MASK (0x00000400) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (0) /* Level must include inorder to work */ +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 2000000) - 1) << 8) +#endif +#endif /* CONFIG_M5249 */ + +#ifdef CONFIG_M5271 +#include +#include + +#define CFG_FEC0_IOBASE (MMAP_FEC) +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40)) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR3) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprl0) +#define CFG_TMRINTR_NO (INT0_LO_DTMR3) +#define CFG_TMRINTR_MASK (INTC_IPRL_INT22) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (0) /* Level must include inorder to work */ +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif + +#define CFG_INTR_BASE (MMAP_INTC0) +#define CFG_NUM_IRQS (128) +#endif /* CONFIG_M5271 */ + +#ifdef CONFIG_M5272 +#include +#include + +#define CFG_FEC0_IOBASE (MMAP_FEC) +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40)) + +#define CFG_INTR_BASE (MMAP_INTC) +#define CFG_NUM_IRQS (64) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_TMR0) +#define CFG_TMR_BASE (MMAP_TMR3) +#define CFG_TMRPND_REG (((volatile intctrl_t *)(CFG_INTR_BASE))->int_isr) +#define CFG_TMRINTR_NO (INT_TMR3) +#define CFG_TMRINTR_MASK (INT_ISR_INT24) +#define CFG_TMRINTR_PEND (0) +#define CFG_TMRINTR_PRI (INT_ICR1_TMR3PI | INT_ICR1_TMR3IPL(5)) +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif +#endif /* CONFIG_M5272 */ + +#ifdef CONFIG_M5282 +#include +#include + +#define CFG_FEC0_IOBASE (MMAP_FEC) +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40)) + +#define CFG_INTR_BASE (MMAP_INTC0) +#define CFG_NUM_IRQS (128) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR3) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprl0) +#define CFG_TMRINTR_NO (INT0_LO_DTMR3) +#define CFG_TMRINTR_MASK (1 << INT0_LO_DTMR3) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (0x1E) /* Level must include inorder to work */ +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif +#endif /* CONFIG_M5282 */ + #ifdef CONFIG_M5329 #include #include diff --git a/include/asm-m68k/immap_5249.h b/include/asm-m68k/immap_5249.h index a2c1271..6c6fbcc 100644 --- a/include/asm-m68k/immap_5249.h +++ b/include/asm-m68k/immap_5249.h @@ -25,19 +25,11 @@ #ifndef __IMMAP_5249__ #define __IMMAP_5249__ -/* Timer module registers - */ -typedef struct timer_ctrl { - ushort timer_tmr; - ushort res1; - ushort timer_trr; - ushort res2; - ushort timer_tcap; - ushort res3; - ushort timer_tcn; - ushort res4; - ushort timer_ter; - uchar res5[14]; -} timer_t; +#define MMAP_INTC (CFG_MBAR + 0x00000040) +#define MMAP_DTMR0 (CFG_MBAR + 0x00000140) +#define MMAP_DTMR1 (CFG_MBAR + 0x00000180) +#define MMAP_UART0 (CFG_MBAR + 0x000001C0) +#define MMAP_UART1 (CFG_MBAR + 0x00000200) +#define MMAP_QSPI (CFG_MBAR + 0x00000400) -#endif /* __IMMAP_5249__ */ +#endif /* __IMMAP_5249__ */ diff --git a/include/asm-m68k/immap_5271.h b/include/asm-m68k/immap_5271.h index 424dc1d..d9dc015 100644 --- a/include/asm-m68k/immap_5271.h +++ b/include/asm-m68k/immap_5271.h @@ -26,73 +26,73 @@ #ifndef __IMMAP_5271__ #define __IMMAP_5271__ -/* Interrupt module registers -*/ -typedef struct int_ctrl { - uint int_icr1; - uint int_icr2; - uint int_icr3; - uint int_icr4; - uint int_isr; - uint int_pitr; - uint int_piwr; - uchar res1[3]; - uchar int_pivr; -} intctrl_t; +#define MMAP_SCM (CFG_MBAR + 0x00000000) +#define MMAP_SDRAM (CFG_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_MBAR + 0x00000080) +#define MMAP_DMA0 (CFG_MBAR + 0x00000100) +#define MMAP_DMA1 (CFG_MBAR + 0x00000110) +#define MMAP_DMA2 (CFG_MBAR + 0x00000120) +#define MMAP_DMA3 (CFG_MBAR + 0x00000130) +#define MMAP_UART0 (CFG_MBAR + 0x00000200) +#define MMAP_UART1 (CFG_MBAR + 0x00000240) +#define MMAP_UART2 (CFG_MBAR + 0x00000280) +#define MMAP_I2C (CFG_MBAR + 0x00000300) +#define MMAP_QSPI (CFG_MBAR + 0x00000340) +#define MMAP_DTMR0 (CFG_MBAR + 0x00000400) +#define MMAP_DTMR1 (CFG_MBAR + 0x00000440) +#define MMAP_DTMR2 (CFG_MBAR + 0x00000480) +#define MMAP_DTMR3 (CFG_MBAR + 0x000004C0) +#define MMAP_INTC0 (CFG_MBAR + 0x00000C00) +#define MMAP_INTC1 (CFG_MBAR + 0x00000D00) +#define MMAP_INTCACK (CFG_MBAR + 0x00000F00) +#define MMAP_FEC (CFG_MBAR + 0x00001000) +#define MMAP_FECFIFO (CFG_MBAR + 0x00001400) +#define MMAP_GPIO (CFG_MBAR + 0x00100000) +#define MMAP_CCM (CFG_MBAR + 0x00110000) +#define MMAP_PLL (CFG_MBAR + 0x00120000) +#define MMAP_EPORT (CFG_MBAR + 0x00130000) +#define MMAP_WDOG (CFG_MBAR + 0x00140000) +#define MMAP_PIT0 (CFG_MBAR + 0x00150000) +#define MMAP_PIT1 (CFG_MBAR + 0x00160000) +#define MMAP_PIT2 (CFG_MBAR + 0x00170000) +#define MMAP_PIT3 (CFG_MBAR + 0x00180000) +#define MMAP_MDHA (CFG_MBAR + 0x00190000) +#define MMAP_RNG (CFG_MBAR + 0x001A0000) +#define MMAP_SKHA (CFG_MBAR + 0x001B0000) +#define MMAP_CAN1 (CFG_MBAR + 0x001C0000) +#define MMAP_ETPU (CFG_MBAR + 0x001D0000) +#define MMAP_CAN2 (CFG_MBAR + 0x001F0000) -/* Timer module registers - */ -typedef struct timer_ctrl { - ushort timer_tmr; - ushort res1; - ushort timer_trr; - ushort res2; - ushort timer_tcap; - ushort res3; - ushort timer_tcn; - ushort res4; - ushort timer_ter; - uchar res5[14]; -} timer_t; - - /* Fast ethernet controller registers - */ -typedef struct fec { - uint res1; - uint fec_ievent; - uint fec_imask; - uint res2; - uint fec_r_des_active; - uint fec_x_des_active; - uint res3[3]; - uint fec_ecntrl; - uint res4[6]; - uint fec_mii_data; - uint fec_mii_speed; - uint res5[7]; - uint fec_mibc; - uint res6[7]; - uint fec_r_cntrl; - uint res7[15]; - uint fec_x_cntrl; - uint res8[7]; - uint fec_addr_low; - uint fec_addr_high; - uint fec_opd; - uint res9[10]; - uint fec_ihash_table_high; - uint fec_ihash_table_low; - uint fec_ghash_table_high; - uint fec_ghash_table_low; - uint res10[7]; - uint fec_tfwr; - uint res11; - uint fec_r_bound; - uint fec_r_fstart; - uint res12[11]; - uint fec_r_des_start; - uint fec_x_des_start; - uint fec_r_buff_size; -} fec_t; +/* Interrupt module registers */ +typedef struct int0_ctrl { + /* Interrupt Controller 0 */ + u32 iprh0; /* 0x00 Pending Register High */ + u32 iprl0; /* 0x04 Pending Register Low */ + u32 imrh0; /* 0x08 Mask Register High */ + u32 imrl0; /* 0x0C Mask Register Low */ + u32 frch0; /* 0x10 Force Register High */ + u32 frcl0; /* 0x14 Force Register Low */ + u8 irlr; /* 0x18 */ + u8 iacklpr; /* 0x19 */ + u16 res1[19]; /* 0x1a - 0x3c */ + u8 icr0[64]; /* 0x40 - 0x7F Control registers */ + u32 res3[24]; /* 0x80 - 0xDF */ + u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ + u8 res4[3]; /* 0xE1 - 0xE3 */ + u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res5[3]; /* 0xE5 - 0xE7 */ + u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE9 - 0xEB */ + u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xED - 0xEF */ + u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xF1 - 0xF3 */ + u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF5 - 0xF7 */ + u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF9 - 0xFB */ + u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xFD - 0xFF */ +} int0_t; -#endif /* __IMMAP_5271__ */ +#endif /* __IMMAP_5271__ */ diff --git a/include/asm-m68k/immap_5272.h b/include/asm-m68k/immap_5272.h index ecb4906..2ebb140 100644 --- a/include/asm-m68k/immap_5272.h +++ b/include/asm-m68k/immap_5272.h @@ -25,423 +25,326 @@ #ifndef __IMMAP_5272__ #define __IMMAP_5272__ -/* System configuration registers -*/ -typedef struct sys_ctrl { - uint sc_mbar; - ushort sc_scr; - ushort sc_spr; - uint sc_pmr; - char res1[2]; - ushort sc_alpr; - uint sc_dir; - char res2[12]; +#define MMAP_CFG (CFG_MBAR + 0x00000000) +#define MMAP_INTC (CFG_MBAR + 0x00000020) +#define MMAP_FBCS (CFG_MBAR + 0x00000040) +#define MMAP_GPIO (CFG_MBAR + 0x00000080) +#define MMAP_QSPI (CFG_MBAR + 0x000000A0) +#define MMAP_PWM (CFG_MBAR + 0x000000C0) +#define MMAP_DMA0 (CFG_MBAR + 0x000000E0) +#define MMAP_UART0 (CFG_MBAR + 0x00000100) +#define MMAP_UART1 (CFG_MBAR + 0x00000140) +#define MMAP_SDRAM (CFG_MBAR + 0x00000180) +#define MMAP_TMR0 (CFG_MBAR + 0x00000200) +#define MMAP_TMR1 (CFG_MBAR + 0x00000220) +#define MMAP_TMR2 (CFG_MBAR + 0x00000240) +#define MMAP_TMR3 (CFG_MBAR + 0x00000260) +#define MMAP_WDOG (CFG_MBAR + 0x00000280) +#define MMAP_PLIC (CFG_MBAR + 0x00000300) +#define MMAP_FEC (CFG_MBAR + 0x00000840) +#define MMAP_USB (CFG_MBAR + 0x00001000) + +/* System configuration registers */ +typedef struct sys_ctrl { + uint sc_mbar; + ushort sc_scr; + ushort sc_spr; + uint sc_pmr; + char res1[2]; + ushort sc_alpr; + uint sc_dir; + char res2[12]; } sysctrl_t; -/* Interrupt module registers -*/ +/* Interrupt module registers */ typedef struct int_ctrl { - uint int_icr1; - uint int_icr2; - uint int_icr3; - uint int_icr4; - uint int_isr; - uint int_pitr; - uint int_piwr; - uchar res1[3]; - uchar int_pivr; + uint int_icr1; + uint int_icr2; + uint int_icr3; + uint int_icr4; + uint int_isr; + uint int_pitr; + uint int_piwr; + uchar res1[3]; + uchar int_pivr; } intctrl_t; -/* Chip select module registers. -*/ -typedef struct cs_ctlr { - uint cs_br0; - uint cs_or0; - uint cs_br1; - uint cs_or1; - uint cs_br2; - uint cs_or2; - uint cs_br3; - uint cs_or3; - uint cs_br4; - uint cs_or4; - uint cs_br5; - uint cs_or5; - uint cs_br6; - uint cs_or6; - uint cs_br7; - uint cs_or7; +/* Chip select module registers */ +typedef struct cs_ctlr { + uint cs_br0; + uint cs_or0; + uint cs_br1; + uint cs_or1; + uint cs_br2; + uint cs_or2; + uint cs_br3; + uint cs_or3; + uint cs_br4; + uint cs_or4; + uint cs_br5; + uint cs_or5; + uint cs_br6; + uint cs_or6; + uint cs_br7; + uint cs_or7; } csctrl_t; -/* GPIO port registers -*/ -typedef struct gpio_ctrl { - uint gpio_pacnt; - ushort gpio_paddr; - ushort gpio_padat; - uint gpio_pbcnt; - ushort gpio_pbddr; - ushort gpio_pbdat; - uchar res1[4]; - ushort gpio_pcddr; - ushort gpio_pcdat; - uint gpio_pdcnt; - uchar res2[4]; +/* GPIO port registers */ +typedef struct gpio_ctrl { + uint gpio_pacnt; + ushort gpio_paddr; + ushort gpio_padat; + uint gpio_pbcnt; + ushort gpio_pbddr; + ushort gpio_pbdat; + uchar res1[4]; + ushort gpio_pcddr; + ushort gpio_pcdat; + uint gpio_pdcnt; + uchar res2[4]; } gpio_t; -/* QSPI module registers - */ -typedef struct qspi_ctrl { - ushort qspi_qmr; - uchar res1[2]; - ushort qspi_qdlyr; - uchar res2[2]; - ushort qspi_qwr; - uchar res3[2]; - ushort qspi_qir; - uchar res4[2]; - ushort qspi_qar; - uchar res5[2]; - ushort qspi_qdr; - uchar res6[10]; +/* QSPI module registers */ +typedef struct qspi_ctrl { + ushort qspi_qmr; + uchar res1[2]; + ushort qspi_qdlyr; + uchar res2[2]; + ushort qspi_qwr; + uchar res3[2]; + ushort qspi_qir; + uchar res4[2]; + ushort qspi_qar; + uchar res5[2]; + ushort qspi_qdr; + uchar res6[10]; } qspi_t; -/* PWM module registers - */ -typedef struct pwm_ctrl { - uchar pwm_pwcr0; - uchar res1[3]; - uchar pwm_pwcr1; - uchar res2[3]; - uchar pwm_pwcr2; - uchar res3[7]; - uchar pwm_pwwd0; - uchar res4[3]; - uchar pwm_pwwd1; - uchar res5[3]; - uchar pwm_pwwd2; - uchar res6[7]; +/* PWM module registers */ +typedef struct pwm_ctrl { + uchar pwm_pwcr0; + uchar res1[3]; + uchar pwm_pwcr1; + uchar res2[3]; + uchar pwm_pwcr2; + uchar res3[7]; + uchar pwm_pwwd0; + uchar res4[3]; + uchar pwm_pwwd1; + uchar res5[3]; + uchar pwm_pwwd2; + uchar res6[7]; } pwm_t; -/* DMA module registers - */ -typedef struct dma_ctrl { - ulong dma_dmr; - uchar res1[2]; - ushort dma_dir; - ulong dma_dbcr; - ulong dma_dsar; - ulong dma_ddar; - uchar res2[12]; +/* DMA module registers */ +typedef struct dma_ctrl { + ulong dma_dmr; + uchar res1[2]; + ushort dma_dir; + ulong dma_dbcr; + ulong dma_dsar; + ulong dma_ddar; + uchar res2[12]; } dma_t; -/* UART module registers - */ -typedef struct uart_ctrl { - uchar uart_umr; - uchar res1[3]; - uchar uart_usr_ucsr; - uchar res2[3]; - uchar uart_ucr; - uchar res3[3]; - uchar uart_urb_utb; - uchar res4[3]; - uchar uart_uipcr_uacr; - uchar res5[3]; - uchar uart_uisr_uimr; - uchar res6[3]; - uchar uart_udu; - uchar res7[3]; - uchar uart_udl; - uchar res8[3]; - uchar uart_uabu; - uchar res9[3]; - uchar uart_uabl; - uchar res10[3]; - uchar uart_utf; - uchar res11[3]; - uchar uart_urf; - uchar res12[3]; - uchar uart_ufpd; - uchar res13[3]; - uchar uart_uip; - uchar res14[3]; - uchar uart_uop1; - uchar res15[3]; - uchar uart_uop0; - uchar res16[3]; -} uart_t; - -/* SDRAM controller registers, offset: 0x180 - */ +/* SDRAM controller registers, offset: 0x180 */ typedef struct sdram_ctrl { - uchar res1[2]; - ushort sdram_sdcr; - uchar res2[2]; - ushort sdram_sdtr; - uchar res3[120]; + uchar res1[2]; + ushort sdram_sdcr; + uchar res2[2]; + ushort sdram_sdtr; + uchar res3[120]; } sdramctrl_t; -/* Timer module registers - */ -typedef struct timer_ctrl { - ushort timer_tmr; - ushort res1; - ushort timer_trr; - ushort res2; - ushort timer_tcap; - ushort res3; - ushort timer_tcn; - ushort res4; - ushort timer_ter; - uchar res5[14]; -} timer_t; - -/* Watchdog registers - */ +/* Watchdog registers */ typedef struct wdog_ctrl { - ushort wdog_wrrr; - ushort res1; - ushort wdog_wirr; - ushort res2; - ushort wdog_wcr; - ushort res3; - ushort wdog_wer; - uchar res4[114]; + ushort wdog_wrrr; + ushort res1; + ushort wdog_wirr; + ushort res2; + ushort wdog_wcr; + ushort res3; + ushort wdog_wer; + uchar res4[114]; } wdog_t; -/* PLIC module registers - */ +/* PLIC module registers */ typedef struct plic_ctrl { - ulong plic_p0b1rr; - ulong plic_p1b1rr; - ulong plic_p2b1rr; - ulong plic_p3b1rr; - ulong plic_p0b2rr; - ulong plic_p1b2rr; - ulong plic_p2b2rr; - ulong plic_p3b2rr; - uchar plic_p0drr; - uchar plic_p1drr; - uchar plic_p2drr; - uchar plic_p3drr; - uchar res1[4]; - ulong plic_p0b1tr; - ulong plic_p1b1tr; - ulong plic_p2b1tr; - ulong plic_p3b1tr; - ulong plic_p0b2tr; - ulong plic_p1b2tr; - ulong plic_p2b2tr; - ulong plic_p3b2tr; - uchar plic_p0dtr; - uchar plic_p1dtr; - uchar plic_p2dtr; - uchar plic_p3dtr; - uchar res2[4]; - ushort plic_p0cr; - ushort plic_p1cr; - ushort plic_p2cr; - ushort plic_p3cr; - ushort plic_p0icr; - ushort plic_p1icr; - ushort plic_p2icr; - ushort plic_p3icr; - ushort plic_p0gmr; - ushort plic_p1gmr; - ushort plic_p2gmr; - ushort plic_p3gmr; - ushort plic_p0gmt; - ushort plic_p1gmt; - ushort plic_p2gmt; - ushort plic_p3gmt; - uchar res3; - uchar plic_pgmts; - uchar plic_pgmta; - uchar res4; - uchar plic_p0gcir; - uchar plic_p1gcir; - uchar plic_p2gcir; - uchar plic_p3gcir; - uchar plic_p0gcit; - uchar plic_p1gcit; - uchar plic_p2gcit; - uchar plic_p3gcit; - uchar res5[3]; - uchar plic_pgcitsr; - uchar res6[3]; - uchar plic_pdcsr; - ushort plic_p0psr; - ushort plic_p1psr; - ushort plic_p2psr; - ushort plic_p3psr; - ushort plic_pasr; - uchar res7; - uchar plic_plcr; - ushort res8; - ushort plic_pdrqr; - ushort plic_p0sdr; - ushort plic_p1sdr; - ushort plic_p2sdr; - ushort plic_p3sdr; - ushort res9; - ushort plic_pcsr; - uchar res10[1184]; + ulong plic_p0b1rr; + ulong plic_p1b1rr; + ulong plic_p2b1rr; + ulong plic_p3b1rr; + ulong plic_p0b2rr; + ulong plic_p1b2rr; + ulong plic_p2b2rr; + ulong plic_p3b2rr; + uchar plic_p0drr; + uchar plic_p1drr; + uchar plic_p2drr; + uchar plic_p3drr; + uchar res1[4]; + ulong plic_p0b1tr; + ulong plic_p1b1tr; + ulong plic_p2b1tr; + ulong plic_p3b1tr; + ulong plic_p0b2tr; + ulong plic_p1b2tr; + ulong plic_p2b2tr; + ulong plic_p3b2tr; + uchar plic_p0dtr; + uchar plic_p1dtr; + uchar plic_p2dtr; + uchar plic_p3dtr; + uchar res2[4]; + ushort plic_p0cr; + ushort plic_p1cr; + ushort plic_p2cr; + ushort plic_p3cr; + ushort plic_p0icr; + ushort plic_p1icr; + ushort plic_p2icr; + ushort plic_p3icr; + ushort plic_p0gmr; + ushort plic_p1gmr; + ushort plic_p2gmr; + ushort plic_p3gmr; + ushort plic_p0gmt; + ushort plic_p1gmt; + ushort plic_p2gmt; + ushort plic_p3gmt; + uchar res3; + uchar plic_pgmts; + uchar plic_pgmta; + uchar res4; + uchar plic_p0gcir; + uchar plic_p1gcir; + uchar plic_p2gcir; + uchar plic_p3gcir; + uchar plic_p0gcit; + uchar plic_p1gcit; + uchar plic_p2gcit; + uchar plic_p3gcit; + uchar res5[3]; + uchar plic_pgcitsr; + uchar res6[3]; + uchar plic_pdcsr; + ushort plic_p0psr; + ushort plic_p1psr; + ushort plic_p2psr; + ushort plic_p3psr; + ushort plic_pasr; + uchar res7; + uchar plic_plcr; + ushort res8; + ushort plic_pdrqr; + ushort plic_p0sdr; + ushort plic_p1sdr; + ushort plic_p2sdr; + ushort plic_p3sdr; + ushort res9; + ushort plic_pcsr; + uchar res10[1184]; } plic_t; -/* Fast ethernet controller registers - */ -typedef struct fec { - uint fec_ecntrl; /* ethernet control register */ - uint fec_ievent; /* interrupt event register */ - uint fec_imask; /* interrupt mask register */ - uint fec_ivec; /* interrupt level and vector status */ - uint fec_r_des_active; /* Rx ring updated flag */ - uint fec_x_des_active; /* Tx ring updated flag */ - uint res3[10]; /* reserved */ - uint fec_mii_data; /* MII data register */ - uint fec_mii_speed; /* MII speed control register */ - uint res4[17]; /* reserved */ - uint fec_r_bound; /* end of RAM (read-only) */ - uint fec_r_fstart; /* Rx FIFO start address */ - uint res5[6]; /* reserved */ - uint fec_x_fstart; /* Tx FIFO start address */ - uint res7[21]; /* reserved */ - uint fec_r_cntrl; /* Rx control register */ - uint fec_r_hash; /* Rx hash register */ - uint res8[14]; /* reserved */ - uint fec_x_cntrl; /* Tx control register */ - uint res9[0x9e]; /* reserved */ - uint fec_addr_low; /* lower 32 bits of station address */ - uint fec_addr_high; /* upper 16 bits of station address */ - uint fec_hash_table_high; /* upper 32-bits of hash table */ - uint fec_hash_table_low; /* lower 32-bits of hash table */ - uint fec_r_des_start; /* beginning of Rx descriptor ring */ - uint fec_x_des_start; /* beginning of Tx descriptor ring */ - uint fec_r_buff_size; /* Rx buffer size */ - uint res2[9]; /* reserved */ - uchar fec_fifo[960]; /* fifo RAM */ -} fec_t; - -/* USB module registers -*/ +/* USB module registers */ typedef struct usb { - ushort res1; - ushort usb_fnr; - ushort res2; - ushort usb_fnmr; - ushort res3; - ushort usb_rfmr; - ushort res4; - ushort usb_rfmmr; - uchar res5[3]; - uchar usb_far; - ulong usb_asr; - ulong usb_drr1; - ulong usb_drr2; - ushort res6; - ushort usb_specr; - ushort res7; - ushort usb_ep0sr; - ulong usb_iep0cfg; - ulong usb_oep0cfg; - ulong usb_ep1cfg; - ulong usb_ep2cfg; - ulong usb_ep3cfg; - ulong usb_ep4cfg; - ulong usb_ep5cfg; - ulong usb_ep6cfg; - ulong usb_ep7cfg; - ulong usb_ep0ctl; - ushort res8; - ushort usb_ep1ctl; - ushort res9; - ushort usb_ep2ctl; - ushort res10; - ushort usb_ep3ctl; - ushort res11; - ushort usb_ep4ctl; - ushort res12; - ushort usb_ep5ctl; - ushort res13; - ushort usb_ep6ctl; - ushort res14; - ushort usb_ep7ctl; - ulong usb_ep0isr; - ushort res15; - ushort usb_ep1isr; - ushort res16; - ushort usb_ep2isr; - ushort res17; - ushort usb_ep3isr; - ushort res18; - ushort usb_ep4isr; - ushort res19; - ushort usb_ep5isr; - ushort res20; - ushort usb_ep6isr; - ushort res21; - ushort usb_ep7isr; - ulong usb_ep0imr; - ushort res22; - ushort usb_ep1imr; - ushort res23; - ushort usb_ep2imr; - ushort res24; - ushort usb_ep3imr; - ushort res25; - ushort usb_ep4imr; - ushort res26; - ushort usb_ep5imr; - ushort res27; - ushort usb_ep6imr; - ushort res28; - ushort usb_ep7imr; - ulong usb_ep0dr; - ulong usb_ep1dr; - ulong usb_ep2dr; - ulong usb_ep3dr; - ulong usb_ep4dr; - ulong usb_ep5dr; - ulong usb_ep6dr; - ulong usb_ep7dr; - ushort res29; - ushort usb_ep0dpr; - ushort res30; - ushort usb_ep1dpr; - ushort res31; - ushort usb_ep2dpr; - ushort res32; - ushort usb_ep3dpr; - ushort res33; - ushort usb_ep4dpr; - ushort res34; - ushort usb_ep5dpr; - ushort res35; - ushort usb_ep6dpr; - ushort res36; - ushort usb_ep7dpr; - uchar res37[788]; - uchar usb_cfgram[1024]; + ushort res1; + ushort usb_fnr; + ushort res2; + ushort usb_fnmr; + ushort res3; + ushort usb_rfmr; + ushort res4; + ushort usb_rfmmr; + uchar res5[3]; + uchar usb_far; + ulong usb_asr; + ulong usb_drr1; + ulong usb_drr2; + ushort res6; + ushort usb_specr; + ushort res7; + ushort usb_ep0sr; + ulong usb_iep0cfg; + ulong usb_oep0cfg; + ulong usb_ep1cfg; + ulong usb_ep2cfg; + ulong usb_ep3cfg; + ulong usb_ep4cfg; + ulong usb_ep5cfg; + ulong usb_ep6cfg; + ulong usb_ep7cfg; + ulong usb_ep0ctl; + ushort res8; + ushort usb_ep1ctl; + ushort res9; + ushort usb_ep2ctl; + ushort res10; + ushort usb_ep3ctl; + ushort res11; + ushort usb_ep4ctl; + ushort res12; + ushort usb_ep5ctl; + ushort res13; + ushort usb_ep6ctl; + ushort res14; + ushort usb_ep7ctl; + ulong usb_ep0isr; + ushort res15; + ushort usb_ep1isr; + ushort res16; + ushort usb_ep2isr; + ushort res17; + ushort usb_ep3isr; + ushort res18; + ushort usb_ep4isr; + ushort res19; + ushort usb_ep5isr; + ushort res20; + ushort usb_ep6isr; + ushort res21; + ushort usb_ep7isr; + ulong usb_ep0imr; + ushort res22; + ushort usb_ep1imr; + ushort res23; + ushort usb_ep2imr; + ushort res24; + ushort usb_ep3imr; + ushort res25; + ushort usb_ep4imr; + ushort res26; + ushort usb_ep5imr; + ushort res27; + ushort usb_ep6imr; + ushort res28; + ushort usb_ep7imr; + ulong usb_ep0dr; + ulong usb_ep1dr; + ulong usb_ep2dr; + ulong usb_ep3dr; + ulong usb_ep4dr; + ulong usb_ep5dr; + ulong usb_ep6dr; + ulong usb_ep7dr; + ushort res29; + ushort usb_ep0dpr; + ushort res30; + ushort usb_ep1dpr; + ushort res31; + ushort usb_ep2dpr; + ushort res32; + ushort usb_ep3dpr; + ushort res33; + ushort usb_ep4dpr; + ushort res34; + ushort usb_ep5dpr; + ushort res35; + ushort usb_ep6dpr; + ushort res36; + ushort usb_ep7dpr; + uchar res37[788]; + uchar usb_cfgram[1024]; } usb_t; -/* Internal memory map. -*/ -typedef struct immap { - sysctrl_t sysctrl_reg; /* System configuration registers */ - intctrl_t intctrl_reg; /* Interrupt controller registers */ - csctrl_t csctrl_reg; /* Chip select controller registers */ - gpio_t gpio_reg; /* GPIO controller registers */ - qspi_t qspi_reg; /* QSPI controller registers */ - pwm_t pwm_reg; /* Pulse width modulation registers */ - dma_t dma_reg; /* DMA registers */ - uart_t uart_reg[2]; /* UART registers */ - sdramctrl_t sdram_reg; /* SDRAM controller registers */ - timer_t timer_reg[4]; /* Timer registers */ - wdog_t wdog_reg; /* Watchdog registers */ - plic_t plic_reg; /* Physical layer interface registers */ - fec_t fec_reg; /* Fast ethernet controller registers */ - usb_t usb_reg; /* USB controller registers */ -} immap_t; - -#endif /* __IMMAP_5272__ */ +#endif /* __IMMAP_5272__ */ diff --git a/include/asm-m68k/immap_5282.h b/include/asm-m68k/immap_5282.h index 6553b08..e82960a 100644 --- a/include/asm-m68k/immap_5282.h +++ b/include/asm-m68k/immap_5282.h @@ -25,61 +25,168 @@ #ifndef __IMMAP_5282__ #define __IMMAP_5282__ -struct sys_ctrl { - uint ipsbar; - char res1[4]; - uint rambar; - char res2[4]; - uchar crsr; - uchar cwcr; - uchar lpicr; - uchar cwsr; - uint dmareqc; - char res3[4]; - uint mpark; +#define MMAP_SCM (CFG_MBAR + 0x00000000) +#define MMAP_SDRAMC (CFG_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_MBAR + 0x00000080) +#define MMAP_DMA0 (CFG_MBAR + 0x00000100) +#define MMAP_DMA1 (CFG_MBAR + 0x00000140) +#define MMAP_DMA2 (CFG_MBAR + 0x00000180) +#define MMAP_DMA3 (CFG_MBAR + 0x000001C0) +#define MMAP_UART0 (CFG_MBAR + 0x00000200) +#define MMAP_UART1 (CFG_MBAR + 0x00000240) +#define MMAP_UART2 (CFG_MBAR + 0x00000280) +#define MMAP_I2C (CFG_MBAR + 0x00000300) +#define MMAP_QSPI (CFG_MBAR + 0x00000340) +#define MMAP_DTMR0 (CFG_MBAR + 0x00000400) +#define MMAP_DTMR1 (CFG_MBAR + 0x00000440) +#define MMAP_DTMR2 (CFG_MBAR + 0x00000480) +#define MMAP_DTMR3 (CFG_MBAR + 0x000004C0) +#define MMAP_INTC0 (CFG_MBAR + 0x00000C00) +#define MMAP_INTC1 (CFG_MBAR + 0x00000D00) +#define MMAP_INTCACK (CFG_MBAR + 0x00000F00) +#define MMAP_FEC (CFG_MBAR + 0x00001000) +#define MMAP_FECFIFO (CFG_MBAR + 0x00001400) +#define MMAP_GPIO (CFG_MBAR + 0x00100000) +#define MMAP_CCM (CFG_MBAR + 0x00110000) +#define MMAP_PLL (CFG_MBAR + 0x00120000) +#define MMAP_EPORT (CFG_MBAR + 0x00130000) +#define MMAP_WDOG (CFG_MBAR + 0x00140000) +#define MMAP_PIT0 (CFG_MBAR + 0x00150000) +#define MMAP_PIT1 (CFG_MBAR + 0x00160000) +#define MMAP_PIT2 (CFG_MBAR + 0x00170000) +#define MMAP_PIT3 (CFG_MBAR + 0x00180000) +#define MMAP_QADC (CFG_MBAR + 0x00190000) +#define MMAP_GPTMRA (CFG_MBAR + 0x001A0000) +#define MMAP_GPTMRB (CFG_MBAR + 0x001B0000) +#define MMAP_CAN (CFG_MBAR + 0x001C0000) +#define MMAP_CFMC (CFG_MBAR + 0x001D0000) +#define MMAP_CFMMEM (CFG_MBAR + 0x04000000) - /* TODO: finish these */ -}; +/* System Control Module */ +typedef struct scm_ctrl { + u32 ipsbar; + u32 res1; + u32 rambar; + u32 res2; + u8 crsr; + u8 cwcr; + u8 lpicr; + u8 cwsr; + u32 res3; + u8 mpark; + u8 res4[3]; + u8 pacr0; + u8 pacr1; + u8 pacr2; + u8 pacr3; + u8 pacr4; + u8 res5; + u8 pacr5; + u8 pacr6; + u8 pacr7; + u8 res6; + u8 pacr8; + u8 res7; + u8 gpacr0; + u8 gpacr1; + u16 res8; +} scm_t; -/* Fast ethernet controller registers - */ -typedef struct fec { - uint res1; /* reserved 1000*/ - uint fec_ievent; /* interrupt event register 1004*/ /* EIR */ - uint fec_imask; /* interrupt mask register 1008*/ /* EIMR */ - uint res2; /* reserved 100c*/ - uint fec_r_des_active; /* Rx ring updated flag 1010*/ /* RDAR */ - uint fec_x_des_active; /* Tx ring updated flag 1014*/ /* XDAR */ - uint res3[3]; /* reserved 1018*/ - uint fec_ecntrl; /* ethernet control register 1024*/ /* ECR */ - uint res4[6]; /* reserved 1028*/ - uint fec_mii_data; /* MII data register 1040*/ /* MDATA */ - uint fec_mii_speed; /* MII speed control register 1044*/ /* MSCR */ - /*1044*/ - uint res5[7]; /* reserved 1048*/ - uint fec_mibc; /* MIB Control/Status register 1064*/ /* MIBC */ - uint res6[7]; /* reserved 1068*/ - uint fec_r_cntrl; /* Rx control register 1084*/ /* RCR */ - uint res7[15]; /* reserved 1088*/ - uint fec_x_cntrl; /* Tx control register 10C4*/ /* TCR */ - uint res8[7]; /* reserved 10C8*/ - uint fec_addr_low; /* lower 32 bits of station address */ /* PALR */ - uint fec_addr_high; /* upper 16 bits of station address */ /* PAUR */ - uint fec_opd; /* opcode + pause duration 10EC*/ /* OPD */ - uint res9[10]; /* reserved 10F0*/ - uint fec_ihash_table_high; /* upper 32-bits of individual hash */ /* IAUR */ - uint fec_ihash_table_low; /* lower 32-bits of individual hash */ /* IALR */ - uint fec_ghash_table_high; /* upper 32-bits of group hash */ /* GAUR */ - uint fec_ghash_table_low; /* lower 32-bits of group hash */ /* GALR */ - uint res10[7]; /* reserved 1128*/ - uint fec_tfwr; /* Transmit FIFO watermark 1144*/ /* TFWR */ - uint res11; /* reserved 1148*/ - uint fec_r_bound; /* FIFO Receive Bound Register = end of */ /* FRBR */ - uint fec_r_fstart; /* FIFO Receive FIfo Start Registers = */ /* FRSR */ - uint res12[11]; /* reserved 1154*/ - uint fec_r_des_start;/* beginning of Rx descriptor ring 1180*/ /* ERDSR */ - uint fec_x_des_start;/* beginning of Tx descriptor ring 1184*/ /* ETDSR */ - uint fec_r_buff_size;/* Rx buffer size 1188*/ /* EMRBR */ -} fec_t; +/* Flexbus module Chip select registers */ +typedef struct fbcs_ctrl { + u16 csar0; /* 0x00 Chip-Select Address Register 0 */ + u16 res0; + u32 csmr0; /* 0x04 Chip-Select Mask Register 0 */ + u16 res1; /* 0x08 */ + u16 cscr0; /* 0x0A Chip-Select Control Register 0 */ + + u16 csar1; /* 0x0C Chip-Select Address Register 1 */ + u16 res2; + u32 csmr1; /* 0x10 Chip-Select Mask Register 1 */ + u16 res3; /* 0x14 */ + u16 cscr1; /* 0x16 Chip-Select Control Register 1 */ + + u16 csar2; /* 0x18 Chip-Select Address Register 2 */ + u16 res4; + u32 csmr2; /* 0x1C Chip-Select Mask Register 2 */ + u16 res5; /* 0x20 */ + u16 cscr2; /* 0x22 Chip-Select Control Register 2 */ + + u16 csar3; /* 0x24 Chip-Select Address Register 3 */ + u16 res6; + u32 csmr3; /* 0x28 Chip-Select Mask Register 3 */ + u16 res7; /* 0x2C */ + u16 cscr3; /* 0x2E Chip-Select Control Register 3 */ + + u16 csar4; /* 0x30 Chip-Select Address Register 4 */ + u16 res8; + u32 csmr4; /* 0x34 Chip-Select Mask Register 4 */ + u16 res9; /* 0x38 */ + u16 cscr4; /* 0x3A Chip-Select Control Register 4 */ + + u16 csar5; /* 0x3C Chip-Select Address Register 5 */ + u16 res10; + u32 csmr5; /* 0x40 Chip-Select Mask Register 5 */ + u16 res11; /* 0x44 */ + u16 cscr5; /* 0x46 Chip-Select Control Register 5 */ + + u16 csar6; /* 0x48 Chip-Select Address Register 5 */ + u16 res12; + u32 csmr6; /* 0x4C Chip-Select Mask Register 5 */ + u16 res13; /* 0x50 */ + u16 cscr6; /* 0x52 Chip-Select Control Register 5 */ + + u16 csar7; /* 0x54 Chip-Select Address Register 5 */ + u16 res14; + u32 csmr7; /* 0x58 Chip-Select Mask Register 5 */ + u16 res15; /* 0x5C */ + u16 cscr7; /* 0x5E Chip-Select Control Register 5 */ +} fbcs_t; + +/* Interrupt module registers */ +typedef struct int0_ctrl { + /* Interrupt Controller 0 */ + u32 iprh0; /* 0x00 Pending Register High */ + u32 iprl0; /* 0x04 Pending Register Low */ + u32 imrh0; /* 0x08 Mask Register High */ + u32 imrl0; /* 0x0C Mask Register Low */ + u32 frch0; /* 0x10 Force Register High */ + u32 frcl0; /* 0x14 Force Register Low */ + u8 irlr; /* 0x18 */ + u8 iacklpr; /* 0x19 */ + u16 res1[19]; /* 0x1a - 0x3c */ + u8 icr0[64]; /* 0x40 - 0x7F Control registers */ + u32 res3[24]; /* 0x80 - 0xDF */ + u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ + u8 res4[3]; /* 0xE1 - 0xE3 */ + u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res5[3]; /* 0xE5 - 0xE7 */ + u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE9 - 0xEB */ + u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xED - 0xEF */ + u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xF1 - 0xF3 */ + u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF5 - 0xF7 */ + u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF9 - 0xFB */ + u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xFD - 0xFF */ +} int0_t; + +/* Clock Module registers */ +typedef struct pll_ctrl { + u16 syncr; /* 0x00 synthesizer control register */ + u16 synsr; /* 0x02 synthesizer status register */ +} pll_t; + +/* Watchdog registers */ +typedef struct wdog_ctrl { + ushort wcr; + ushort wmr; + ushort wcntr; + ushort wsr; +} wdog_t; -#endif /* __IMMAP_5282__ */ +#endif /* __IMMAP_5282__ */ diff --git a/include/asm-m68k/m5249.h b/include/asm-m68k/m5249.h index 8c1b077..5ed3cbc 100644 --- a/include/asm-m68k/m5249.h +++ b/include/asm-m68k/m5249.h @@ -24,7 +24,6 @@ * MA 02111-1307 USA */ - #ifndef mcf5249_h #define mcf5249_h /****************************************************************************/ @@ -32,22 +31,21 @@ /* * useful definitions for reading/writing MBAR offset memory */ -#define mbar_readLong(x) *((volatile unsigned long *) (CFG_MBAR + x)) -#define mbar_writeLong(x,y) *((volatile unsigned long *) (CFG_MBAR + x)) = y -#define mbar_writeShort(x,y) *((volatile unsigned short *) (CFG_MBAR + x)) = y -#define mbar_writeByte(x,y) *((volatile unsigned char *) (CFG_MBAR + x)) = y -#define mbar2_readLong(x) *((volatile unsigned long *) (CFG_MBAR2 + x)) -#define mbar2_writeLong(x,y) *((volatile unsigned long *) (CFG_MBAR2 + x)) = y -#define mbar2_writeShort(x,y) *((volatile unsigned short *) (CFG_MBAR2 + x)) = y -#define mbar2_writeByte(x,y) *((volatile unsigned char *) (CFG_MBAR2 + x)) = y - +#define mbar_readLong(x) *((volatile unsigned long *) (CFG_MBAR + x)) +#define mbar_writeLong(x,y) *((volatile unsigned long *) (CFG_MBAR + x)) = y +#define mbar_writeShort(x,y) *((volatile unsigned short *) (CFG_MBAR + x)) = y +#define mbar_writeByte(x,y) *((volatile unsigned char *) (CFG_MBAR + x)) = y +#define mbar2_readLong(x) *((volatile unsigned long *) (CFG_MBAR2 + x)) +#define mbar2_writeLong(x,y) *((volatile unsigned long *) (CFG_MBAR2 + x)) = y +#define mbar2_writeShort(x,y) *((volatile unsigned short *) (CFG_MBAR2 + x)) = y +#define mbar2_writeByte(x,y) *((volatile unsigned char *) (CFG_MBAR2 + x)) = y /* * Size of internal RAM */ -#define INT_RAM_SIZE 32768 /* RAMBAR0 - 32k */ -#define INT_RAM_SIZE2 65536 /* RAMBAR1 - 64k */ +#define INT_RAM_SIZE 32768 /* RAMBAR0 - 32k */ +#define INT_RAM_SIZE2 65536 /* RAMBAR1 - 64k */ /* * Define the 5249 SIM register set addresses. @@ -56,51 +54,47 @@ /***************** ***** MBAR1 ***** *****************/ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_MPARK 0x0c /* Bus master park register (r/w) */ - -#define MCFSIM_SIMR 0x00 /* SIM Config reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ - -#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ -#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ - -/** UART Bases **/ -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ +#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w) */ +#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ +#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ +#define MCFSIM_MPARK 0x0c /* Bus master park register (r/w) */ + +#define MCFSIM_SIMR 0x00 /* SIM Config reg (r/w) */ +#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ +#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ +#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ +#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ +#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ +#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ +#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ +#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ +#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ + +#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ +#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ + +#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ +#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ +#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ +#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ +#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ +#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ +#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ +#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ +#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ + +#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ +#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ +#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ /***************** ***** MBAR2 ***** @@ -109,39 +103,39 @@ /* GPIO Addresses * Note: These are offset from MBAR2! */ -#define MCFSIM_GPIO_READ 0x00 /* Read-Only access to gpio 0-31 (MBAR2) (r) */ -#define MCFSIM_GPIO_OUT 0x04 /* Output register for gpio 0-31 (MBAR2) (r/w)*/ -#define MCFSIM_GPIO_EN 0x08 /* gpio 0-31 enable (r/w)*/ -#define MCFSIM_GPIO_FUNC 0x0c /* gpio 0-31 function select (r/w) */ -#define MCFSIM_GPIO1_READ 0xb0 /* Read-Only access to gpio 32-63 (MBAR2) (r) */ -#define MCFSIM_GPIO1_OUT 0xb4 /* Output register for gpio 32-63 (MBAR2) (r/w) */ -#define MCFSIM_GPIO1_EN 0xb8 /* gpio 32-63 enable (r/w) */ -#define MCFSIM_GPIO1_FUNC 0xbc /* gpio 32-63 function select (r/w) */ - -#define MCFSIM_GPIO_INT_STAT 0xc0 /* Secondary Interrupt status (r) */ -#define MCFSIM_GPIO_INT_CLEAR 0xc0 /* Secondary Interrupt status (w) */ -#define MCFSIM_GPIO_INT_EN 0xc4 /* Secondary Interrupt status (r/w) */ - -#define MCFSIM_INT_STAT3 0xe0 /* 3rd Interrupt ctrl status (r) */ -#define MCFSIM_INT_CLEAR3 0xe0 /* 3rd Interrupt ctrl clear (w) */ -#define MCFSIM_INT_EN3 0xe4 /* 3rd Interrupt ctrl enable (r/w) */ - -#define MCFSIM_INTLEV1 0x140 /* Interrupts 0 - 7 (r/w) */ -#define MCFSIM_INTLEV2 0x144 /* Interrupts 8 -15 (r/w) */ -#define MCFSIM_INTLEV3 0x148 /* Interrupts 16-23 (r/w) */ -#define MCFSIM_INTLEV4 0x14c /* Interrupts 24-31 (r/w) */ -#define MCFSIM_INTLEV5 0x150 /* Interrupts 32-39 (r/w) */ -#define MCFSIM_INTLEV6 0x154 /* Interrupts 40-47 (r/w) */ -#define MCFSIM_INTLEV7 0x158 /* Interrupts 48-55 (r/w) */ -#define MCFSIM_INTLEV8 0x15c /* Interrupts 56-63 (r/w) */ - -#define MCFSIM_SPURVEC 0x167 /* Spurious Vector Register (r/w) */ -#define MCFSIM_INTBASE 0x16b /* Software interrupt base address (r/w) */ - -#define MCFSIM_IDECONFIG1 0x18c /* IDE config register 1 (r/w) */ -#define MCFSIM_IDECONFIG2 0x190 /* IDE config register 1 (r/w) */ - -#define MCFSIM_PLLCR 0x180 /* PLL Control register */ +#define MCFSIM_GPIO_READ 0x00 /* Read-Only access to gpio 0-31 (MBAR2) (r) */ +#define MCFSIM_GPIO_OUT 0x04 /* Output register for gpio 0-31 (MBAR2) (r/w) */ +#define MCFSIM_GPIO_EN 0x08 /* gpio 0-31 enable (r/w) */ +#define MCFSIM_GPIO_FUNC 0x0c /* gpio 0-31 function select (r/w) */ +#define MCFSIM_GPIO1_READ 0xb0 /* Read-Only access to gpio 32-63 (MBAR2) (r) */ +#define MCFSIM_GPIO1_OUT 0xb4 /* Output register for gpio 32-63 (MBAR2) (r/w) */ +#define MCFSIM_GPIO1_EN 0xb8 /* gpio 32-63 enable (r/w) */ +#define MCFSIM_GPIO1_FUNC 0xbc /* gpio 32-63 function select (r/w) */ + +#define MCFSIM_GPIO_INT_STAT 0xc0 /* Secondary Interrupt status (r) */ +#define MCFSIM_GPIO_INT_CLEAR 0xc0 /* Secondary Interrupt status (w) */ +#define MCFSIM_GPIO_INT_EN 0xc4 /* Secondary Interrupt status (r/w) */ + +#define MCFSIM_INT_STAT3 0xe0 /* 3rd Interrupt ctrl status (r) */ +#define MCFSIM_INT_CLEAR3 0xe0 /* 3rd Interrupt ctrl clear (w) */ +#define MCFSIM_INT_EN3 0xe4 /* 3rd Interrupt ctrl enable (r/w) */ + +#define MCFSIM_INTLEV1 0x140 /* Interrupts 0 - 7 (r/w) */ +#define MCFSIM_INTLEV2 0x144 /* Interrupts 8 -15 (r/w) */ +#define MCFSIM_INTLEV3 0x148 /* Interrupts 16-23 (r/w) */ +#define MCFSIM_INTLEV4 0x14c /* Interrupts 24-31 (r/w) */ +#define MCFSIM_INTLEV5 0x150 /* Interrupts 32-39 (r/w) */ +#define MCFSIM_INTLEV6 0x154 /* Interrupts 40-47 (r/w) */ +#define MCFSIM_INTLEV7 0x158 /* Interrupts 48-55 (r/w) */ +#define MCFSIM_INTLEV8 0x15c /* Interrupts 56-63 (r/w) */ + +#define MCFSIM_SPURVEC 0x167 /* Spurious Vector Register (r/w) */ +#define MCFSIM_INTBASE 0x16b /* Software interrupt base address (r/w) */ + +#define MCFSIM_IDECONFIG1 0x18c /* IDE config register 1 (r/w) */ +#define MCFSIM_IDECONFIG2 0x190 /* IDE config register 1 (r/w) */ + +#define MCFSIM_PLLCR 0x180 /* PLL Control register */ /* * Some symbol defines for the above... @@ -158,21 +152,20 @@ /* * Bit definitions for the ICR family of registers. */ -#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ -#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ -#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ -#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ -#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ -#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ -#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ -#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ -#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ - -#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ -#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ -#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ -#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ - +#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ +#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ +#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ +#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ +#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ +#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ +#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ +#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ +#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ + +#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ +#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ +#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ +#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ /* * Macros to read/set IMR register. It is 32 bits on the 5249. @@ -184,4 +177,4 @@ #define mcf_setimr(imr) \ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); -#endif /* mcf5249_h */ +#endif /* mcf5249_h */ diff --git a/include/asm-m68k/m5271.h b/include/asm-m68k/m5271.h index e0f02cf..be34398 100644 --- a/include/asm-m68k/m5271.h +++ b/include/asm-m68k/m5271.h @@ -25,7 +25,6 @@ * MA 02111-1307 USA */ - #ifndef _MCF5271_H_ #define _MCF5271_H_ @@ -91,7 +90,7 @@ #define MCF_GPIO_PAR_UART_U1RXD_UART1 0x0C00 #define MCF_GPIO_PAR_UART_U1TXD_UART1 0x0300 -#define MCF_GPIO_PAR_SDRAM_PAR_CSSDCS(x) (((x)&0x03)<<6) +#define MCF_GPIO_PAR_SDRAM_PAR_CSSDCS(x) (((x)&0x03)<<6) #define MCF_SDRAMC_DCR 0x000040 #define MCF_SDRAMC_DACR0 0x000048 @@ -117,4 +116,104 @@ #define MCFSIM_ICR1 0x000C41 -#endif /* _MCF5271_H_ */ +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_SCM (8) +#define INT0_LO_DMA0 (9) +#define INT0_LO_DMA1 (10) +#define INT0_LO_DMA2 (11) +#define INT0_LO_DMA3 (12) +#define INT0_LO_UART0 (13) +#define INT0_LO_UART1 (14) +#define INT0_LO_UART2 (15) +#define INT0_LO_RSVD1 (16) +#define INT0_LO_I2C (17) +#define INT0_LO_QSPI (18) +#define INT0_LO_DTMR0 (19) +#define INT0_LO_DTMR1 (20) +#define INT0_LO_DTMR2 (21) +#define INT0_LO_DTMR3 (22) +#define INT0_LO_FEC_TXF (23) +#define INT0_LO_FEC_TXB (24) +#define INT0_LO_FEC_UN (25) +#define INT0_LO_FEC_RL (26) +#define INT0_LO_FEC_RXF (27) +#define INT0_LO_FEC_RXB (28) +#define INT0_LO_FEC_MII (29) +#define INT0_LO_FEC_LC (30) +#define INT0_LO_FEC_HBERR (31) +#define INT0_HI_FEC_GRA (32) +#define INT0_HI_FEC_EBERR (33) +#define INT0_HI_FEC_BABT (34) +#define INT0_HI_FEC_BABR (35) +#define INT0_HI_PIT0 (36) +#define INT0_HI_PIT1 (37) +#define INT0_HI_PIT2 (38) +#define INT0_HI_PIT3 (39) +#define INT0_HI_RNG (40) +#define INT0_HI_SKHA (41) +#define INT0_HI_MDHA (42) +#define INT0_HI_CAN1_BUF0I (43) +#define INT0_HI_CAN1_BUF1I (44) +#define INT0_HI_CAN1_BUF2I (45) +#define INT0_HI_CAN1_BUF3I (46) +#define INT0_HI_CAN1_BUF4I (47) +#define INT0_HI_CAN1_BUF5I (48) +#define INT0_HI_CAN1_BUF6I (49) +#define INT0_HI_CAN1_BUF7I (50) +#define INT0_HI_CAN1_BUF8I (51) +#define INT0_HI_CAN1_BUF9I (52) +#define INT0_HI_CAN1_BUF10I (53) +#define INT0_HI_CAN1_BUF11I (54) +#define INT0_HI_CAN1_BUF12I (55) +#define INT0_HI_CAN1_BUF13I (56) +#define INT0_HI_CAN1_BUF14I (57) +#define INT0_HI_CAN1_BUF15I (58) +#define INT0_HI_CAN1_ERRINT (59) +#define INT0_HI_CAN1_BOFFINT (60) +/* 60-63 Reserved */ + +/* Bit definitions and macros for INTC_IPRL */ +#define INTC_IPRL_INT31 (0x80000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT0 (0x00000001) + +#endif /* _MCF5271_H_ */ diff --git a/include/asm-m68k/m5272.h b/include/asm-m68k/m5272.h index 54d4a32..895f89d 100644 --- a/include/asm-m68k/m5272.h +++ b/include/asm-m68k/m5272.h @@ -24,7 +24,6 @@ * MA 02111-1307 USA */ - #ifndef mcf5272_h #define mcf5272_h /****************************************************************************/ @@ -35,65 +34,173 @@ #define INT_RAM_SIZE 4096 +#define GPIO_PACNT_PA15MSK (0xC0000000) +#define GPIO_PACNT_DGNT1 (0x40000000) +#define GPIO_PACNT_PA14MSK (0x30000000) +#define GPIO_PACNT_DREQ1 (0x10000000) +#define GPIO_PACNT_PA13MSK (0x0C000000) +#define GPIO_PACNT_DFSC3 (0x04000000) +#define GPIO_PACNT_PA12MSK (0x03000000) +#define GPIO_PACNT_DFSC2 (0x01000000) +#define GPIO_PACNT_PA11MSK (0x00C00000) +#define GPIO_PACNT_QSPI_CS1 (0x00800000) +#define GPIO_PACNT_PA10MSK (0x00300000) +#define GPIO_PACNT_DREQ0 (0x00100000) +#define GPIO_PACNT_PA9MSK (0x000C0000) +#define GPIO_PACNT_DGNT0 (0x00040000) +#define GPIO_PACNT_PA8MSK (0x00030000) +#define GPIO_PACNT_FSC0 (0x00010000) +#define GPIO_PACNT_FSR0 (0x00010000) +#define GPIO_PACNT_PA7MSK (0x0000C000) +#define GPIO_PACNT_DOUT3 (0x00008000) +#define GPIO_PACNT_QSPI_CS3 (0x00004000) +#define GPIO_PACNT_PA6MSK (0x00003000) +#define GPIO_PACNT_USB_RXD (0x00001000) +#define GPIO_PACNT_PA5MSK (0x00000C00) +#define GPIO_PACNT_USB_TXEN (0x00000400) +#define GPIO_PACNT_PA4MSK (0x00000300) +#define GPIO_PACNT_USB_SUSP (0x00000100) +#define GPIO_PACNT_PA3MSK (0x000000C0) +#define GPIO_PACNT_USB_TN (0x00000040) +#define GPIO_PACNT_PA2MSK (0x00000030) +#define GPIO_PACNT_USB_RN (0x00000010) +#define GPIO_PACNT_PA1MSK (0x0000000C) +#define GPIO_PACNT_USB_RP (0x00000004) +#define GPIO_PACNT_PA0MSK (0x00000003) +#define GPIO_PACNT_USB_TP (0x00000001) -/* - * Define the 5272 SIM register set addresses. - */ -#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */ -#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/ -#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */ -#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */ -#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */ - -#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */ - -#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */ -#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */ -#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */ -#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */ +#define GPIO_PBCNT_PB15MSK (0xC0000000) +#define GPIO_PBCNT_E_MDC (0x40000000) +#define GPIO_PBCNT_PB14MSK (0x30000000) +#define GPIO_PBCNT_E_RXER (0x10000000) +#define GPIO_PBCNT_PB13MSK (0x0C000000) +#define GPIO_PBCNT_E_RXD1 (0x04000000) +#define GPIO_PBCNT_PB12MSK (0x03000000) +#define GPIO_PBCNT_E_RXD2 (0x01000000) +#define GPIO_PBCNT_PB11MSK (0x00C00000) +#define GPIO_PBCNT_E_RXD3 (0x00400000) +#define GPIO_PBCNT_PB10MSK (0x00300000) +#define GPIO_PBCNT_E_TXD1 (0x00100000) +#define GPIO_PBCNT_PB9MSK (0x000C0000) +#define GPIO_PBCNT_E_TXD2 (0x00040000) +#define GPIO_PBCNT_PB8MSK (0x00030000) +#define GPIO_PBCNT_E_TXD3 (0x00010000) +#define GPIO_PBCNT_PB7MSK (0x0000C000) +#define GPIO_PBCNT_TOUT0 (0x00004000) +#define GPIO_PBCNT_PB6MSK (0x00003000) +#define GPIO_PBCNT_TA (0x00001000) +#define GPIO_PBCNT_PB4MSK (0x00000300) +#define GPIO_PBCNT_URT0_CLK (0x00000100) +#define GPIO_PBCNT_PB3MSK (0x000000C0) +#define GPIO_PBCNT_URT0_RTS (0x00000040) +#define GPIO_PBCNT_PB2MSK (0x00000030) +#define GPIO_PBCNT_URT0_CTS (0x00000010) +#define GPIO_PBCNT_PB1MSK (0x0000000C) +#define GPIO_PBCNT_URT0_RXD (0x00000004) +#define GPIO_PBCNT_URT0_TIN2 (0x00000004) +#define GPIO_PBCNT_PB0MSK (0x00000003) +#define GPIO_PBCNT_URT0_TXD (0x00000001) -#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */ -#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */ -#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */ -#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */ +#define GPIO_PDCNT_PD7MSK (0x0000C000) +#define GPIO_PDCNT_TIN1 (0x00008000) +#define GPIO_PDCNT_PWM_OUT2 (0x00004000) +#define GPIO_PDCNT_PD6MSK (0x00003000) +#define GPIO_PDCNT_TOUT1 (0x00002000) +#define GPIO_PDCNT_PWM_OUT1 (0x00001000) +#define GPIO_PDCNT_PD5MSK (0x00000C00) +#define GPIO_PDCNT_INT4 (0x00000C00) +#define GPIO_PDCNT_DIN3 (0x00000800) +#define GPIO_PDCNT_PD4MSK (0x00000300) +#define GPIO_PDCNT_URT1_TXD (0x00000200) +#define GPIO_PDCNT_DOUT0 (0x00000100) +#define GPIO_PDCNT_PD3MSK (0x000000C0) +#define GPIO_PDCNT_INT5 (0x000000C0) +#define GPIO_PDCNT_URT1_RTS (0x00000080) +#define GPIO_PDCNT_PD2MSK (0x00000030) +#define GPIO_PDCNT_QSPI_CS2 (0x00000030) +#define GPIO_PDCNT_URT1_CTS (0x00000020) +#define GPIO_PDCNT_PD1MSK (0x0000000C) +#define GPIO_PDCNT_URT1_RXD (0x00000008) +#define GPIO_PDCNT_URT1_TIN3 (0x00000008) +#define GPIO_PDCNT_DIN0 (0x00000004) +#define GPIO_PDCNT_PD0MSK (0x00000003) +#define GPIO_PDCNT_URT1_CLK (0x00000002) +#define GPIO_PDCNT_DCL0 (0x00000001) -#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */ -#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */ -#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */ -#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */ -#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */ -#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */ -#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */ -#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */ -#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */ -#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */ -#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */ -#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */ -#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */ -#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */ -#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */ -#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */ +#define INT_RSVD0 (0) +#define INT_INT1 (1) +#define INT_INT2 (2) +#define INT_INT3 (3) +#define INT_INT4 (4) +#define INT_TMR0 (5) +#define INT_TMR1 (6) +#define INT_TMR2 (7) +#define INT_TMR3 (8) +#define INT_UART1 (9) +#define INT_UART2 (10) +#define INT_PLIP (11) +#define INT_PLIA (12) +#define INT_USB0 (13) +#define INT_USB1 (14) +#define INT_USB2 (15) +#define INT_USB3 (16) +#define INT_USB4 (17) +#define INT_USB5 (18) +#define INT_USB6 (19) +#define INT_USB7 (20) +#define INT_DMA (21) +#define INT_ERX (22) +#define INT_ETX (23) +#define INT_ENTC (24) +#define INT_QSPI (25) +#define INT_INT5 (26) +#define INT_INT6 (27) +#define INT_SWTO (28) -#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */ -#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */ -#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */ -#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */ -#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */ -#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ +#define INT_ICR1_TMR0MASK (0x000F000) +#define INT_ICR1_TMR0PI (0x0008000) +#define INT_ICR1_TMR0IPL(x) (((x)&0x7)<<12) +#define INT_ICR1_TMR1MASK (0x0000F00) +#define INT_ICR1_TMR1PI (0x0000800) +#define INT_ICR1_TMR1IPL(x) (((x)&0x7)<<8) +#define INT_ICR1_TMR2MASK (0x00000F0) +#define INT_ICR1_TMR2PI (0x0000080) +#define INT_ICR1_TMR2IPL(x) (((x)&0x7)<<4) +#define INT_ICR1_TMR3MASK (0x000000F) +#define INT_ICR1_TMR3PI (0x0000008) +#define INT_ICR1_TMR3IPL(x) (((x)&0x7)) -#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */ -#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */ -#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */ -#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */ -#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */ -#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */ -#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */ -#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */ -#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */ +#define INT_ISR_INT31 (0x80000000) +#define INT_ISR_INT30 (0x40000000) +#define INT_ISR_INT29 (0x20000000) +#define INT_ISR_INT28 (0x10000000) +#define INT_ISR_INT27 (0x08000000) +#define INT_ISR_INT26 (0x04000000) +#define INT_ISR_INT25 (0x02000000) +#define INT_ISR_INT24 (0x01000000) +#define INT_ISR_INT23 (0x00800000) +#define INT_ISR_INT22 (0x00400000) +#define INT_ISR_INT21 (0x00200000) +#define INT_ISR_INT20 (0x00100000) +#define INT_ISR_INT19 (0x00080000) +#define INT_ISR_INT18 (0x00040000) +#define INT_ISR_INT17 (0x00020000) +#define INT_ISR_INT16 (0x00010000) +#define INT_ISR_INT15 (0x00008000) +#define INT_ISR_INT14 (0x00004000) +#define INT_ISR_INT13 (0x00002000) +#define INT_ISR_INT12 (0x00001000) +#define INT_ISR_INT11 (0x00000800) +#define INT_ISR_INT10 (0x00000400) +#define INT_ISR_INT9 (0x00000200) +#define INT_ISR_INT8 (0x00000100) +#define INT_ISR_INT7 (0x00000080) +#define INT_ISR_INT6 (0x00000040) +#define INT_ISR_INT5 (0x00000020) +#define INT_ISR_INT4 (0x00000010) +#define INT_ISR_INT3 (0x00000008) +#define INT_ISR_INT2 (0x00000004) +#define INT_ISR_INT1 (0x00000002) +#define INT_ISR_INT0 (0x00000001) -#endif /* mcf5272_h */ +#endif /* mcf5272_h */ diff --git a/include/asm-m68k/m5282.h b/include/asm-m68k/m5282.h index e5058a4..7473bb9 100644 --- a/include/asm-m68k/m5282.h +++ b/include/asm-m68k/m5282.h @@ -23,7 +23,99 @@ /****************************************************************************/ #ifndef m5282_h #define m5282_h -/****************************************************************************/ + +/********************************************************************* +* PLL Clock Module +*********************************************************************/ +/* Bit definitions and macros for PLL_SYNCR */ +#define PLL_SYNCR_LOLRE (0x8000) +#define PLL_SYNCR_MFD2 (0x4000) +#define PLL_SYNCR_MFD1 (0x2000) +#define PLL_SYNCR_MFD0 (0x1000) +#define PLL_SYNCR_LOCRE (0x0800) +#define PLL_SYNCR_RFC2 (0x0400) +#define PLL_SYNCR_RFC1 (0x0200) +#define PLL_SYNCR_RFC0 (0x0100) +#define PLL_SYNCR_LOCEN (0x0080) +#define PLL_SYNCR_DISCLK (0x0040) +#define PLL_SYNCR_FWKUP (0x0020) +#define PLL_SYNCR_STPMD1 (0x0008) +#define PLL_SYNCR_STPMD0 (0x0004) + +/* Bit definitions and macros for PLL_SYNSR */ +#define PLL_SYNSR_MODE (0x0080) +#define PLL_SYNSR_PLLSEL (0x0040) +#define PLL_SYNSR_PLLREF (0x0020) +#define PLL_SYNSR_LOCKS (0x0010) +#define PLL_SYNSR_LOCK (0x0008) +#define PLL_SYNSR_LOCS (0x0004) + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_SCM_SWT1 (8) +#define INT0_LO_DMA_00 (9) +#define INT0_LO_DMA_01 (10) +#define INT0_LO_DMA_02 (11) +#define INT0_LO_DMA_03 (12) +#define INT0_LO_UART0 (13) +#define INT0_LO_UART1 (14) +#define INT0_LO_UART2 (15) +#define INT0_LO_RSVD1 (16) +#define INT0_LO_I2C (17) +#define INT0_LO_QSPI (18) +#define INT0_LO_DTMR0 (19) +#define INT0_LO_DTMR1 (20) +#define INT0_LO_DTMR2 (21) +#define INT0_LO_DTMR3 (22) +#define INT0_LO_FEC_TXF (23) +#define INT0_LO_FEC_TXB (24) +#define INT0_LO_FEC_UN (25) +#define INT0_LO_FEC_RL (26) +#define INT0_LO_FEC_RXF (27) +#define INT0_LO_FEC_RXB (28) +#define INT0_LO_FEC_MII (29) +#define INT0_LO_FEC_LC (30) +#define INT0_LO_FEC_HBERR (31) +#define INT0_HI_FEC_GRA (32) +#define INT0_HI_FEC_EBERR (33) +#define INT0_HI_FEC_BABT (34) +#define INT0_HI_FEC_BABR (35) +#define INT0_HI_PMM_LVDF (36) +#define INT0_HI_QADC_CF1 (37) +#define INT0_HI_QADC_CF2 (38) +#define INT0_HI_QADC_PF1 (39) +#define INT0_HI_QADC_PF2 (40) +#define INT0_HI_GPTA_TOF (41) +#define INT0_HI_GPTA_PAIF (42) +#define INT0_HI_GPTA_PAOVF (43) +#define INT0_HI_GPTA_C0F (44) +#define INT0_HI_GPTA_C1F (45) +#define INT0_HI_GPTA_C2F (46) +#define INT0_HI_GPTA_C3F (47) +#define INT0_HI_GPTB_TOF (48) +#define INT0_HI_GPTB_PAIF (49) +#define INT0_HI_GPTB_PAOVF (50) +#define INT0_HI_GPTB_C0F (51) +#define INT0_HI_GPTB_C1F (52) +#define INT0_HI_GPTB_C2F (53) +#define INT0_HI_GPTB_C3F (54) +#define INT0_HI_PIT0 (55) +#define INT0_HI_PIT1 (56) +#define INT0_HI_PIT2 (57) +#define INT0_HI_PIT3 (58) +#define INT0_HI_CFM_CBEIF (59) +#define INT0_HI_CFM_CCIF (60) +#define INT0_HI_CFM_PVIF (61) +#define INT0_HI_CFM_AEIF (62) /* * Size of internal RAM @@ -96,49 +188,49 @@ #define MCFGPIO_SETD (*(vu_char *) (CFG_MBAR+0x10002B)) #define MCFGPIO_SETE (*(vu_char *) (CFG_MBAR+0x10002C)) #define MCFGPIO_SETF (*(vu_char *) (CFG_MBAR+0x10002D)) -#define MCFGPIO_SETG (*(vu_char *) (CFG_MBAR+0x10002E)) -#define MCFGPIO_SETH (*(vu_char *) (CFG_MBAR+0x10002F)) -#define MCFGPIO_SETJ (*(vu_char *) (CFG_MBAR+0x100030)) -#define MCFGPIO_SETDD (*(vu_char *) (CFG_MBAR+0x100031)) -#define MCFGPIO_SETEH (*(vu_char *) (CFG_MBAR+0x100032)) -#define MCFGPIO_SETEL (*(vu_char *) (CFG_MBAR+0x100033)) -#define MCFGPIO_SETAS (*(vu_char *) (CFG_MBAR+0x100034)) -#define MCFGPIO_SETQS (*(vu_char *) (CFG_MBAR+0x100035)) -#define MCFGPIO_SETSD (*(vu_char *) (CFG_MBAR+0x100036)) -#define MCFGPIO_SETTC (*(vu_char *) (CFG_MBAR+0x100037)) -#define MCFGPIO_SETTD (*(vu_char *) (CFG_MBAR+0x100038)) -#define MCFGPIO_SETUA (*(vu_char *) (CFG_MBAR+0x100039)) - -#define MCFGPIO_CLRA (*(vu_char *) (CFG_MBAR+0x10003C)) -#define MCFGPIO_CLRB (*(vu_char *) (CFG_MBAR+0x10003D)) -#define MCFGPIO_CLRC (*(vu_char *) (CFG_MBAR+0x10003E)) -#define MCFGPIO_CLRD (*(vu_char *) (CFG_MBAR+0x10003F)) -#define MCFGPIO_CLRE (*(vu_char *) (CFG_MBAR+0x100040)) -#define MCFGPIO_CLRF (*(vu_char *) (CFG_MBAR+0x100041)) -#define MCFGPIO_CLRG (*(vu_char *) (CFG_MBAR+0x100042)) -#define MCFGPIO_CLRH (*(vu_char *) (CFG_MBAR+0x100043)) -#define MCFGPIO_CLRJ (*(vu_char *) (CFG_MBAR+0x100044)) -#define MCFGPIO_CLRDD (*(vu_char *) (CFG_MBAR+0x100045)) -#define MCFGPIO_CLREH (*(vu_char *) (CFG_MBAR+0x100046)) -#define MCFGPIO_CLREL (*(vu_char *) (CFG_MBAR+0x100047)) -#define MCFGPIO_CLRAS (*(vu_char *) (CFG_MBAR+0x100048)) -#define MCFGPIO_CLRQS (*(vu_char *) (CFG_MBAR+0x100049)) -#define MCFGPIO_CLRSD (*(vu_char *) (CFG_MBAR+0x10004A)) -#define MCFGPIO_CLRTC (*(vu_char *) (CFG_MBAR+0x10004B)) -#define MCFGPIO_CLRTD (*(vu_char *) (CFG_MBAR+0x10004C)) -#define MCFGPIO_CLRUA (*(vu_char *) (CFG_MBAR+0x10004D)) - -#define MCFGPIO_PBCDPAR (*(vu_char *) (CFG_MBAR+0x100050)) -#define MCFGPIO_PFPAR (*(vu_char *) (CFG_MBAR+0x100051)) -#define MCFGPIO_PEPAR (*(vu_short *)(CFG_MBAR+0x100052)) -#define MCFGPIO_PJPAR (*(vu_char *) (CFG_MBAR+0x100054)) -#define MCFGPIO_PSDPAR (*(vu_char *) (CFG_MBAR+0x100055)) -#define MCFGPIO_PASPAR (*(vu_short *)(CFG_MBAR+0x100056)) -#define MCFGPIO_PEHLPAR (*(vu_char *) (CFG_MBAR+0x100058)) -#define MCFGPIO_PQSPAR (*(vu_char *) (CFG_MBAR+0x100059)) -#define MCFGPIO_PTCPAR (*(vu_char *) (CFG_MBAR+0x10005A)) -#define MCFGPIO_PTDPAR (*(vu_char *) (CFG_MBAR+0x10005B)) -#define MCFGPIO_PUAPAR (*(vu_char *) (CFG_MBAR+0x10005C)) +#define MCFGPIO_SETG (*(vu_char *) (CFG_MBAR+0x10002E)) +#define MCFGPIO_SETH (*(vu_char *) (CFG_MBAR+0x10002F)) +#define MCFGPIO_SETJ (*(vu_char *) (CFG_MBAR+0x100030)) +#define MCFGPIO_SETDD (*(vu_char *) (CFG_MBAR+0x100031)) +#define MCFGPIO_SETEH (*(vu_char *) (CFG_MBAR+0x100032)) +#define MCFGPIO_SETEL (*(vu_char *) (CFG_MBAR+0x100033)) +#define MCFGPIO_SETAS (*(vu_char *) (CFG_MBAR+0x100034)) +#define MCFGPIO_SETQS (*(vu_char *) (CFG_MBAR+0x100035)) +#define MCFGPIO_SETSD (*(vu_char *) (CFG_MBAR+0x100036)) +#define MCFGPIO_SETTC (*(vu_char *) (CFG_MBAR+0x100037)) +#define MCFGPIO_SETTD (*(vu_char *) (CFG_MBAR+0x100038)) +#define MCFGPIO_SETUA (*(vu_char *) (CFG_MBAR+0x100039)) + +#define MCFGPIO_CLRA (*(vu_char *) (CFG_MBAR+0x10003C)) +#define MCFGPIO_CLRB (*(vu_char *) (CFG_MBAR+0x10003D)) +#define MCFGPIO_CLRC (*(vu_char *) (CFG_MBAR+0x10003E)) +#define MCFGPIO_CLRD (*(vu_char *) (CFG_MBAR+0x10003F)) +#define MCFGPIO_CLRE (*(vu_char *) (CFG_MBAR+0x100040)) +#define MCFGPIO_CLRF (*(vu_char *) (CFG_MBAR+0x100041)) +#define MCFGPIO_CLRG (*(vu_char *) (CFG_MBAR+0x100042)) +#define MCFGPIO_CLRH (*(vu_char *) (CFG_MBAR+0x100043)) +#define MCFGPIO_CLRJ (*(vu_char *) (CFG_MBAR+0x100044)) +#define MCFGPIO_CLRDD (*(vu_char *) (CFG_MBAR+0x100045)) +#define MCFGPIO_CLREH (*(vu_char *) (CFG_MBAR+0x100046)) +#define MCFGPIO_CLREL (*(vu_char *) (CFG_MBAR+0x100047)) +#define MCFGPIO_CLRAS (*(vu_char *) (CFG_MBAR+0x100048)) +#define MCFGPIO_CLRQS (*(vu_char *) (CFG_MBAR+0x100049)) +#define MCFGPIO_CLRSD (*(vu_char *) (CFG_MBAR+0x10004A)) +#define MCFGPIO_CLRTC (*(vu_char *) (CFG_MBAR+0x10004B)) +#define MCFGPIO_CLRTD (*(vu_char *) (CFG_MBAR+0x10004C)) +#define MCFGPIO_CLRUA (*(vu_char *) (CFG_MBAR+0x10004D)) + +#define MCFGPIO_PBCDPAR (*(vu_char *) (CFG_MBAR+0x100050)) +#define MCFGPIO_PFPAR (*(vu_char *) (CFG_MBAR+0x100051)) +#define MCFGPIO_PEPAR (*(vu_short *)(CFG_MBAR+0x100052)) +#define MCFGPIO_PJPAR (*(vu_char *) (CFG_MBAR+0x100054)) +#define MCFGPIO_PSDPAR (*(vu_char *) (CFG_MBAR+0x100055)) +#define MCFGPIO_PASPAR (*(vu_short *)(CFG_MBAR+0x100056)) +#define MCFGPIO_PEHLPAR (*(vu_char *) (CFG_MBAR+0x100058)) +#define MCFGPIO_PQSPAR (*(vu_char *) (CFG_MBAR+0x100059)) +#define MCFGPIO_PTCPAR (*(vu_char *) (CFG_MBAR+0x10005A)) +#define MCFGPIO_PTDPAR (*(vu_char *) (CFG_MBAR+0x10005B)) +#define MCFGPIO_PUAPAR (*(vu_char *) (CFG_MBAR+0x10005C)) /* Bit level definitions and macros */ #define MCFGPIO_PORT7 (0x80) @@ -171,7 +263,6 @@ #define MCFGPIO_Px0 (0x01) #define MCFGPIO_Px(x) (0x01< - -/* - * Get address specific defines for this ColdFire member. - */ -#if defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ -#elif defined(CONFIG_M5272) -#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ -#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ -#elif defined(CONFIG_M5282) | defined(CONFIG_M5271) -#define MCFTIMER_BASE1 0x150000 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x160000 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0x170000 /* Base address of TIMER4 */ -#define MCFTIMER_BASE4 0x180000 /* Base address of TIMER3 */ -#endif - -/* - * Define the TIMER register set addresses. - */ -#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ -#define MCFTIMER_TRR 0x02 /* Timer Reference (r/w) */ -#define MCFTIMER_TCR 0x04 /* Timer Capture reg (r/w) */ -#define MCFTIMER_TCN 0x06 /* Timer Counter reg (r/w) */ -#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ - -/* - * Define the TIMER register set addresses for 5282. - */ -#define MCFTIMER_PCSR 0 -#define MCFTIMER_PMR 1 -#define MCFTIMER_PCNTR 2 - -/* - * Bit definitions for the Timer Mode Register (TMR). - * Register bit flags are common accross ColdFires. - */ -#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ -#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ -#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ -#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ -#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ -#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ -#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ -#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ -#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ -#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ -#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ -#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ -#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ -#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ -#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ -#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ -#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ - -/* - * Bit definitions for the Timer Event Registers (TER). - */ -#define MCFTIMER_TER_CAP 0x01 /* Capture event */ -#define MCFTIMER_TER_REF 0x02 /* Refernece event */ - -/* - * Bit definitions for the 5282 PIT Control and Status Register (PCSR). - */ -#define MCFTIMER_PCSR_EN 0x0001 -#define MCFTIMER_PCSR_RLD 0x0002 -#define MCFTIMER_PCSR_PIF 0x0004 -#define MCFTIMER_PCSR_PIE 0x0008 -#define MCFTIMER_PCSR_OVW 0x0010 -#define MCFTIMER_PCSR_HALTED 0x0020 -#define MCFTIMER_PCSR_DOZE 0x0040 - -/****************************************************************************/ -#endif /* mcftimer_h */ diff --git a/include/asm-m68k/mcfuart.h b/include/asm-m68k/mcfuart.h deleted file mode 100644 index 1ccc43f..0000000 --- a/include/asm-m68k/mcfuart.h +++ /dev/null @@ -1,217 +0,0 @@ -/* - * mcfuart.h -- ColdFire internal UART support defines. - * - * File copied from mcfuart.h of uCLinux distribution: - * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/****************************************************************************/ -#ifndef mcfuart_h -#define mcfuart_h -/****************************************************************************/ - -#include - -/* - * Define the base address of the UARTS within the MBAR address - * space. - */ -#if defined(CONFIG_M5272) -#define MCFUART_BASE1 0x100 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ -#elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#if defined(CONFIG_NETtel) -#define MCFUART_BASE1 0x180 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ -#else -#define MCFUART_BASE1 0x140 /* Base address of UART1 */ -#define MCFUART_BASE2 0x180 /* Base address of UART2 */ -#endif -#elif defined(CONFIG_M5282) || defined(CONFIG_M5271) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x240 /* Base address of UART2 */ -#define MCFUART_BASE3 0x280 /* Base address of UART3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#if defined(CONFIG_NETtel) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ -#else -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ -#endif -#endif - -/* - * Define the ColdFire UART register set addresses. - */ -#define MCFUART_UMR 0x00 /* Mode register (r/w) */ -#define MCFUART_USR 0x04 /* Status register (r) */ -#define MCFUART_UCSR 0x04 /* Clock Select (w) */ -#define MCFUART_UCR 0x08 /* Command register (w) */ -#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ -#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ -#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ -#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ -#define MCFUART_UISR 0x14 /* Interrup Status (r) */ -#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ -#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ -#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ -#ifdef CONFIG_M5272 -#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ -#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ -#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ -#else -#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ -#endif -#define MCFUART_UIPR 0x34 /* Input Port (r) */ -#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ -#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ - -#ifdef CONFIG_M5249 -/* Note: This isn't in the 5249 docs */ -#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ -#endif - -/* - * Define bit flags in Mode Register 1 (MR1). - */ -#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ -#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ -#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ -#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ -#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ - -#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ -#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ -#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ -#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ -#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ - -#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ -#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ -#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ -#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ - -/* - * Define bit flags in Mode Register 2 (MR2). - */ -#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ -#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ -#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ -#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ -#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ - -#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ -#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ -#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ - -/* - * Define bit flags in Status Register (USR). - */ -#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ -#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ -#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ -#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ -#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ -#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ -#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ -#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ - -#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ - MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) - -/* - * Define bit flags in Clock Select Register (UCSR). - */ -#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ -#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ -#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ - -#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ -#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ -#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ - -/* - * Define bit flags in Command Register (UCR). - */ -#define MCFUART_UCR_CMDNULL 0x00 /* No command */ -#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */ -#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */ -#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */ -#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */ -#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */ -#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ -#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ - -#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ -#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ -#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ -#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ -#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ -#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ - -/* - * Define bit flags in Input Port Change Register (UIPCR). - */ -#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ -#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ - -/* - * Define bit flags in Input Port Register (UIP). - */ -#define MCFUART_UIPR_CTS 0x01 /* CTS value */ - -/* - * Define bit flags in Output Port Registers (UOP). - * Clear bit by writing to UOP0, set by writing to UOP1. - */ -#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ - -/* - * Define bit flags in the Auxiliary Control Register (UACR). - */ -#define MCFUART_UACR_IEC 0x01 /* Input enable control */ - -/* - * Define bit flags in Interrupt Status Register (UISR). - * These same bits are used for the Interrupt Mask Register (UIMR). - */ -#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ -#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ -#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ -#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ - -#ifdef CONFIG_M5272 -/* - * Define bit flags in the Transmitter FIFO Register (UTF). - */ -#define MCFUART_UTF_TXB 0x1f /* transmitter data level */ -#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */ -#define MCFUART_UTF_TXS 0xc0 /* transmitter status */ - -/* - * Define bit flags in the Receiver FIFO Register (URF). - */ -#define MCFUART_URF_RXB 0x1f /* receiver data level */ -#define MCFUART_URF_FULL 0x20 /* receiver fifo full */ -#define MCFUART_URF_RXS 0xc0 /* receiver status */ -#endif diff --git a/include/asm-m68k/timer.h b/include/asm-m68k/timer.h index 3ec710d..030720c 100644 --- a/include/asm-m68k/timer.h +++ b/include/asm-m68k/timer.h @@ -46,7 +46,7 @@ typedef struct dtimer_ctrl { u8 ter; /* 0x11 Event register */ u16 res7; /* 0x12 */ #else - u16 tmr; /* 0x00 Mode register */ + u16 tmr; /* 0x00 Mode register */ u8 txmr; /* 0x02 Extended Mode register */ u8 ter; /* 0x03 Event register */ u32 trr; /* 0x04 Reference register */ -- cgit v1.1 From 6706424d0bb851fb52af00cd1c3301e91ee7f2b0 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:41:06 -0500 Subject: ColdFire: cobra5272 platform for MCF52x2 update Signed-off-by: TsiChungLiew --- board/cobra5272/Makefile | 2 +- board/cobra5272/cobra5272.c | 5 +- board/cobra5272/mii.c | 303 ++++++++++++++++++++++++++++++++++++++++++++ include/configs/cobra5272.h | 26 +++- 4 files changed, 331 insertions(+), 5 deletions(-) create mode 100644 board/cobra5272/mii.c diff --git a/board/cobra5272/Makefile b/board/cobra5272/Makefile index cf07cf4..be704b7 100644 --- a/board/cobra5272/Makefile +++ b/board/cobra5272/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/cobra5272/cobra5272.c b/board/cobra5272/cobra5272.c index 26adb4a..86c7ee1 100644 --- a/board/cobra5272/cobra5272.c +++ b/board/cobra5272/cobra5272.c @@ -22,8 +22,7 @@ */ #include -#include -#include +#include int checkboard (void) @@ -35,7 +34,7 @@ int checkboard (void) long int initdram (int board_type) { - volatile sdramctrl_t *sdp = (sdramctrl_t *) (CFG_MBAR + MCFSIM_SDCR); + volatile sdramctrl_t *sdp = (sdramctrl_t *) (MMAP_SDRAM); sdp->sdram_sdtr = 0xf539; sdp->sdram_sdcr = 0x4211; diff --git a/board/cobra5272/mii.c b/board/cobra5272/mii.c new file mode 100644 index 0000000..fadcbb3 --- /dev/null +++ b/board/cobra5272/mii.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3; + } else { + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_AMD79C874VC "AMD79C874VC" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + strcpy(info->phy_name, + STR_ID_AMD79C874VC); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + printf(STR_ID_AMD79C874VC); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 510524a..104d94e 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -65,8 +65,10 @@ * Enable use of Ethernet * --- */ +#define CONFIG_MCFFEC -#define FEC_ENET +/* Enable Dma Timer */ +#define CONFIG_MCFTMR /* --- * Define baudrate for UART1 (console output, tftp, ...) @@ -76,6 +78,8 @@ * --- */ +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -151,6 +155,26 @@ #undef CONFIG_CMD_LOADB #undef CONFIG_CMD_MII +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif /* *----------------------------------------------------------------------------- -- cgit v1.1 From 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:43:20 -0500 Subject: ColdFire: idmr platform MCF52x2 update Signed-off-by: TsiChungLiew --- board/idmr/Makefile | 2 +- board/idmr/idmr.c | 3 +- board/idmr/mii.c | 303 +++++++++++++++++++++++++++++++++++++++++++++++++ include/configs/idmr.h | 34 ++++-- 4 files changed, 332 insertions(+), 10 deletions(-) create mode 100644 board/idmr/mii.c diff --git a/board/idmr/Makefile b/board/idmr/Makefile index cf07cf4..be704b7 100644 --- a/board/idmr/Makefile +++ b/board/idmr/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/idmr/idmr.c b/board/idmr/idmr.c index 58cdba1..081c375 100644 --- a/board/idmr/idmr.c +++ b/board/idmr/idmr.c @@ -22,8 +22,7 @@ */ #include -#include -#include +#include int checkboard (void) { puts ("Board: iDMR\n"); diff --git a/board/idmr/mii.c b/board/idmr/mii.c new file mode 100644 index 0000000..f6c63c3 --- /dev/null +++ b/board/idmr/mii.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + /* Enable Ethernet pins */ + mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C); + } else { + } + + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_KS8721BL "KS8721BL" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + strcpy(info->phy_name, + STR_ID_KS8721BL); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + printf(STR_ID_KS8721BL); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 1ab7b27..3ec4a79 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -44,6 +44,8 @@ */ #define CONFIG_BOOTCOMMAND "run net_nfs" #define CONFIG_BOOTDELAY 5 +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #define CONFIG_ETHADDR 00:06:3b:01:41:55 @@ -58,6 +60,8 @@ #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root " \ "filesystem over NFS; echo" +#define CONFIG_MCFTMR + #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -147,11 +151,27 @@ /* * Ethernet */ -#define FEC_ENET -#define CONFIG_NET_RETRY_COUNT 5 -#define CFG_ENET_BD_BASE 0x480000 -#define CFG_DISCOVER_PHY 1 +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif /* * Definitions for initial stack pointer and data area (in DPRAM) @@ -186,7 +206,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /* FLASH organization */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -215,8 +235,8 @@ "2m(rootfs)," \ "-(user)"; -#if defined(CONFIG_CMD_MII) +#if (CONFIG_COMMANDS & CFG_CMD_MII) #error MII commands don't work on iDMR board and sholud not be enabled. -#endif +#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */ #endif /* _IDMR_H */ -- cgit v1.1 From a9505510bf56a9b5558248dd8b73ec9d9a1556a2 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:45:51 -0500 Subject: ColdFire: update r5200 platform for MCF52x2 Signed-off-by: TsiChungLiew --- board/r5200/Makefile | 2 +- board/r5200/mii.c | 303 ++++++++++++++++++++++++++++++++++++++++++++++++ include/configs/r5200.h | 30 ++++- 3 files changed, 328 insertions(+), 7 deletions(-) create mode 100644 board/r5200/mii.c diff --git a/board/r5200/Makefile b/board/r5200/Makefile index 424ab1c..2ec71ee 100644 --- a/board/r5200/Makefile +++ b/board/r5200/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o +COBJS = $(BOARD).o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/r5200/mii.c b/board/r5200/mii.c new file mode 100644 index 0000000..706c90f --- /dev/null +++ b/board/r5200/mii.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + /* Enable Ethernet pins */ + mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C); + } else { + } + + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_KS8721BL "KS8721BL" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + strcpy(info->phy_name, + STR_ID_KS8721BL); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + printf(STR_ID_KS8721BL); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/include/configs/r5200.h b/include/configs/r5200.h index 0e743bb..fc7658b 100644 --- a/include/configs/r5200.h +++ b/include/configs/r5200.h @@ -39,13 +39,10 @@ #define CONFIG_M5271 /* define processor type */ #define CONFIG_R5200 /* define board type */ -#define FEC_ENET -#define CONFIG_NET_RETRY_COUNT 5 - -#define CONFIG_IPADDR 192.168.0.172 -#define CONFIG_SERVERIP 192.168.0.148 -#define CONFIG_ETHADDR 00:06:3b:00:44:55 +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -87,6 +84,27 @@ #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_LOADB +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif /* Note: We only copy one sectors worth of application code from location * 10200000 for speed purposes. Increase the size if necessary */ -- cgit v1.1 From aa93d859d9b1fcd8eea52d51b06e86c38f72111b Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:46:38 -0500 Subject: ColdFire: update TASREG platform for MCF52x2 Signed-off-by: TsiChungLiew --- include/configs/TASREG.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index 2b2ae01..dccdf0c 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -43,6 +43,10 @@ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } -- cgit v1.1 From 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:55:10 -0500 Subject: ColdFire: Update EB+MCF-EV123 platform Signed-off-by: TsiChungLiew --- board/BuS/EB+MCF-EV123/Makefile | 2 +- board/BuS/EB+MCF-EV123/mii.c | 304 ++++++++++++++++++++++++++++++++++++++++ include/configs/EB+MCF-EV123.h | 41 +++++- 3 files changed, 340 insertions(+), 7 deletions(-) create mode 100644 board/BuS/EB+MCF-EV123/mii.c diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile index ed3ac07..ceeffa7 100644 --- a/board/BuS/EB+MCF-EV123/Makefile +++ b/board/BuS/EB+MCF-EV123/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o +COBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/BuS/EB+MCF-EV123/mii.c b/board/BuS/EB+MCF-EV123/mii.c new file mode 100644 index 0000000..ebd3ed9 --- /dev/null +++ b/board/BuS/EB+MCF-EV123/mii.c @@ -0,0 +1,304 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + MCFGPIO_PASPAR |= 0x0F00; + MCFGPIO_PEHLPAR = CFG_PEHLPAR; + } else { + MCFGPIO_PASPAR &= 0xF0FF; + MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR; + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_AMD79C874VC "AMD79C874VC" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + strcpy(info->phy_name, + STR_ID_AMD79C874VC); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + printf(STR_ID_AMD79C874VC); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index a8697ec..dae5295 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -40,9 +40,8 @@ #define CONFIG_MISC_INIT_R -#define FEC_ENET -#define CONFIG_ETHADDR 00:CF:52:82:EB:01 - +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 9600 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -84,7 +83,39 @@ #include #undef CONFIG_CMD_LOADB +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:CF:52:82:EB:01 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* CONFIG_MCFFEC */ #define CONFIG_BOOTDELAY 5 #define CFG_PROMPT "\nEV123 U-Boot> " @@ -122,9 +153,6 @@ */ #define CFG_MBAR 0x40000000 -#define CFG_DISCOVER_PHY -/* #define CFG_ENET_BD_BASE 0x380000 */ - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ @@ -151,6 +179,7 @@ #define CFG_FLASH_BASE 0xFFE00000 #define CFG_INT_FLASH_BASE 0xF0000000 +#define CFG_INT_FLASH_ENABLE 0x21 /* If M5282 port is fully implemented the monitor base will be behind * the vector table. */ -- cgit v1.1 From f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 20:32:06 -0500 Subject: ColdFire: Update Freescale MCF52x2 platforms Signed-off-by: TsiChungLiew --- board/m5271evb/Makefile | 2 +- board/m5271evb/m5271evb.c | 3 +- board/m5271evb/mii.c | 303 ++++++++++++++++++++++++++++++++++++ board/m5272c3/Makefile | 2 +- board/m5272c3/m5272c3.c | 7 +- board/m5272c3/mii.c | 303 ++++++++++++++++++++++++++++++++++++ board/m5282evb/Makefile | 2 +- board/m5282evb/config.mk | 2 +- board/m5282evb/flash.c | 378 --------------------------------------------- board/m5282evb/m5282evb.c | 61 +++++++- board/m5282evb/mii.c | 304 ++++++++++++++++++++++++++++++++++++ include/configs/M5271EVB.h | 100 +++++++++--- include/configs/M5272C3.h | 105 ++++++++----- include/configs/M5282EVB.h | 147 ++++++++++++++---- 14 files changed, 1238 insertions(+), 481 deletions(-) create mode 100644 board/m5271evb/mii.c create mode 100644 board/m5272c3/mii.c delete mode 100644 board/m5282evb/flash.c create mode 100644 board/m5282evb/mii.c diff --git a/board/m5271evb/Makefile b/board/m5271evb/Makefile index 424ab1c..2ec71ee 100644 --- a/board/m5271evb/Makefile +++ b/board/m5271evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o +COBJS = $(BOARD).o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/m5271evb/m5271evb.c b/board/m5271evb/m5271evb.c index c26c91d..9caad63 100644 --- a/board/m5271evb/m5271evb.c +++ b/board/m5271evb/m5271evb.c @@ -22,8 +22,7 @@ */ #include -#include -#include +#include int checkboard (void) { puts ("Board: Freescale M5271EVB\n"); diff --git a/board/m5271evb/mii.c b/board/m5271evb/mii.c new file mode 100644 index 0000000..f6c63c3 --- /dev/null +++ b/board/m5271evb/mii.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + /* Enable Ethernet pins */ + mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C); + } else { + } + + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_KS8721BL "KS8721BL" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + strcpy(info->phy_name, + STR_ID_KS8721BL); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + printf(STR_ID_KS8721BL); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/m5272c3/Makefile b/board/m5272c3/Makefile index cf07cf4..be704b7 100644 --- a/board/m5272c3/Makefile +++ b/board/m5272c3/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/m5272c3/m5272c3.c b/board/m5272c3/m5272c3.c index 0dfeaf2..6dcda4f 100644 --- a/board/m5272c3/m5272c3.c +++ b/board/m5272c3/m5272c3.c @@ -22,18 +22,17 @@ */ #include -#include -#include +#include int checkboard (void) { puts ("Board: "); - puts("MOTOROLA MCF5272C3 EVB\n"); + puts ("Freescale MCF5272C3 EVB\n"); return 0; }; long int initdram (int board_type) { - volatile sdramctrl_t * sdp = (sdramctrl_t *)(CFG_MBAR + MCFSIM_SDCR); + volatile sdramctrl_t * sdp = (sdramctrl_t *)(MMAP_SDRAM); sdp->sdram_sdtr = 0xf539; sdp->sdram_sdcr = 0x4211; diff --git a/board/m5272c3/mii.c b/board/m5272c3/mii.c new file mode 100644 index 0000000..fadcbb3 --- /dev/null +++ b/board/m5272c3/mii.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3; + } else { + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_AMD79C874VC "AMD79C874VC" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + strcpy(info->phy_name, + STR_ID_AMD79C874VC); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + printf(STR_ID_AMD79C874VC); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/m5282evb/Makefile b/board/m5282evb/Makefile index cf07cf4..2ec71ee 100644 --- a/board/m5282evb/Makefile +++ b/board/m5282evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/m5282evb/config.mk b/board/m5282evb/config.mk index 8484307..0aa2361 100644 --- a/board/m5282evb/config.mk +++ b/board/m5282evb/config.mk @@ -22,4 +22,4 @@ # MA 02111-1307 USA # -TEXT_BASE = 0x20000 +TEXT_BASE = 0xFFE00000 diff --git a/board/m5282evb/flash.c b/board/m5282evb/flash.c deleted file mode 100644 index 36a7c31..0000000 --- a/board/m5282evb/flash.c +++ /dev/null @@ -1,378 +0,0 @@ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#define PHYS_FLASH_1 CFG_FLASH_BASE -#define FLASH_BANK_SIZE 0x200000 - -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; - -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (AMD_MANUFACT & FLASH_VENDMASK): - printf ("AMD: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (AMD_ID_PL160CB & FLASH_TYPEMASK): - printf ("AM29PL160CB (16Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - - Done: - return; -} - - -unsigned long flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_PL160CB & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured to many flash banks!\n"); - - for (j = 0; j < flash_info[i].sector_count; j++) { - if (j == 0) { - /* 1st is 16 KiB */ - flash_info[i].start[j] = flashbase; - } - if ((j >= 1) && (j <= 2)) { - /* 2nd and 3rd are 8 KiB */ - flash_info[i].start[j] = - flashbase + 0x4000 + 0x2000 * (j - 1); - } - if (j == 3) { - /* 4th is 32 KiB */ - flash_info[i].start[j] = flashbase + 0x8000; - } - if ((j >= 4) && (j <= 34)) { - /* rest is 256 KiB */ - flash_info[i].start[j] = - flashbase + 0x10000 + 0x10000 * (j - - 4); - } - } - size += flash_info[i].size; - } - - flash_protect (FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + 0xffff, &flash_info[0]); - - return size; -} - - -#define CMD_READ_ARRAY 0x00F0 -#define CMD_UNLOCK1 0x00AA -#define CMD_UNLOCK2 0x0055 -#define CMD_ERASE_SETUP 0x0080 -#define CMD_ERASE_CONFIRM 0x0030 -#define CMD_PROGRAM 0x00A0 -#define CMD_UNLOCK_BYPASS 0x0020 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1))) - -#define BIT_ERASE_DONE 0x0080 -#define BIT_RDY_MASK 0x0080 -#define BIT_PROGRAM_ERROR 0x0020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define READY 1 -#define ERR 2 -#define TMO 4 - - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ulong result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip1; - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (AMD_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - printf ("\n"); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - set_timer (0); - - if (info->protect[sect] == 0) { /* not protected */ - volatile u16 *addr = - (volatile u16 *) (info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip1 = 0; - - do { - result = *addr; - - /* check timeout */ - if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip1 = TMO; - break; - } - - if (!chip1 - && (result & 0xFFFF) & BIT_ERASE_DONE) - chip1 = READY; - - } while (!chip1); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip1 == ERR) { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip1 == TMO) { - rc = ERR_TIMOUT; - goto outahere; - } - - printf ("ok.\n"); - } else { /* it was protected */ - - printf ("protected!\n"); - } - } - - if (ctrlc ()) - printf ("User Interrupt!\n"); - - outahere: - /* allow flash to settle - wait 10 ms */ - udelay (10000); - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile u16 *addr = (volatile u16 *) dest; - ulong result; - int rc = ERR_OK; - int cflag, iflag; - int chip1; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - set_timer (0); - - /* wait until flash is ready */ - chip1 = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { - chip1 = ERR | TMO; - break; - } - if (!chip1 && ((result & 0x80) == (data & 0x80))) - chip1 = READY; - - } while (!chip1); - - *addr = CMD_READ_ARRAY; - - if (chip1 == ERR || *addr != data) - rc = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong wp, data; - int rc; - - if (addr & 1) { - printf ("unaligned destination not supported\n"); - return ERR_ALIGN; - } - -#if 0 - if (cnt & 1) { - printf ("odd transfer sizes not supported\n"); - return ERR_ALIGN; - } -#endif - - wp = addr; - - if (addr & 1) { - data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *) - src); - if ((rc = write_word (info, wp - 1, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - while (cnt >= 2) { - data = *((volatile u16 *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 1) { - data = (*((volatile u8 *) src) << 8) | - *((volatile u8 *) (wp + 1)); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - return ERR_OK; -} diff --git a/board/m5282evb/m5282evb.c b/board/m5282evb/m5282evb.c index a08af68..243d6a4 100644 --- a/board/m5282evb/m5282evb.c +++ b/board/m5282evb/m5282evb.c @@ -22,14 +22,71 @@ */ #include +#include + +DECLARE_GLOBAL_DATA_PTR; int checkboard (void) { - puts ("MOTOROLA M5272EVB Evaluation Board\n"); + puts ("Board: Freescale M5282EVB Evaluation Board\n"); return 0; } long int initdram (int board_type) { - return 0x1000000; + u32 dramsize, i, dramclk; + + dramsize = CFG_SDRAM_SIZE * 0x100000; + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + if (!(MCFSDRAMC_DACR0 & MCFSDRAMC_DACR_RE)) + { + dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ); + + /* Initialize DRAM Control Register: DCR */ + MCFSDRAMC_DCR = (0 + | MCFSDRAMC_DCR_RTIM_6 + | MCFSDRAMC_DCR_RC((15 * dramclk)>>4)); + + /* Initialize DACR0 */ + MCFSDRAMC_DACR0 = (0 + | MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE) + | MCFSDRAMC_DACR_CASL(1) + | MCFSDRAMC_DACR_CBM(3) + | MCFSDRAMC_DACR_PS_32); + + /* Initialize DMR0 */ + MCFSDRAMC_DMR0 = (0 + | ((dramsize - 1) & 0xFFFC0000) + | MCFSDRAMC_DMR_V); + + /* Set IP (bit 3) in DACR */ + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; + + /* Wait 30ns to allow banks to precharge */ + for (i = 0; i < 5; i++) { + asm ("nop"); + } + + /* Write to this block to initiate precharge */ + *(u32 *)(CFG_SDRAM_BASE) = 0xA5A59696; + + /* Set RE (bit 15) in DACR */ + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE; + + /* Wait for at least 8 auto refresh cycles to occur */ + for (i = 0; i < 2000; i++) { + asm(" nop"); + } + + /* Finish the configuration by issuing the IMRS. */ + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IMRS; + + /* Write to the SDRAM Mode Register */ + *(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696; + } } diff --git a/board/m5282evb/mii.c b/board/m5282evb/mii.c new file mode 100644 index 0000000..ebd3ed9 --- /dev/null +++ b/board/m5282evb/mii.c @@ -0,0 +1,304 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + MCFGPIO_PASPAR |= 0x0F00; + MCFGPIO_PEHLPAR = CFG_PEHLPAR; + } else { + MCFGPIO_PASPAR &= 0xF0FF; + MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR; + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_AMD79C874VC "AMD79C874VC" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + strcpy(info->phy_name, + STR_ID_AMD79C874VC); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + printf(STR_ID_AMD79C874VC); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 885a882..0f97050 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -31,7 +31,6 @@ #ifndef _M5271EVB_H #define _M5271EVB_H -#define DEBUG #undef DEBUG /* @@ -41,17 +40,15 @@ #define CONFIG_M5271 /* define processor type */ #define CONFIG_M5271EVB /* define board type */ -#define CONFIG_IPADDR 192.168.30.1 -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_ETHADDR 00:06:3b:01:41:55 +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG /* disable watchdog */ -#define CONFIG_BOOTDELAY 5 - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ @@ -73,7 +70,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -81,22 +77,83 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_LOADB +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x00000300 +#define CFG_IMMR CFG_MBAR + +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_BOOTFILE "u-boot.bin" +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_RETRY_COUNT 5 +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5235EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe2ffff;" \ + "era ffe00000 ffe2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" #define CFG_PROMPT "=> " -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x00100000 @@ -114,16 +171,11 @@ #define CFG_MBAR 0x40000000 /* Register Base Addrs */ -/* Enable FEC ethernet */ -#define FEC_ENET -#define CONFIG_NET_RETRY_COUNT 5 -#define CFG_ENET_BD_BASE 0x480000 - /* * Definitions for initial stack pointer and data area (in DPRAM) */ #define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -134,7 +186,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #ifdef CONFIG_MONITOR_IS_IN_RAM @@ -152,11 +204,11 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /* FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 1000 #define CFG_FLASH_CFI 1 @@ -169,4 +221,4 @@ /* Port configuration */ #define CFG_FECI2C 0xF0 -#endif /* _M5271EVB_H */ +#endif /* _M5271EVB_H */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index cc456dc..2b8734b 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -33,18 +33,20 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5272 /* define processor type */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5272 /* define processor type */ -#define FEC_ENET +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } -#define CONFIG_WATCHDOG +#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ -#define CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ +#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -60,7 +62,6 @@ #define CFG_ENV_IS_IN_FLASH 1 #endif - /* * BOOTP options */ @@ -69,37 +70,82 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #include #define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_MISC +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_LOADB - #define CONFIG_BOOTDELAY 5 +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* CONFIG_MCFFEC */ + +#define CONFIG_HOSTNAME M5272C3 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" #define CFG_PROMPT "-> " -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x20000 - #define CFG_MEMTEST_START 0x400 #define CFG_MEMTEST_END 0x380000 - #define CFG_HZ 1000 #define CFG_CLK 66000000 @@ -108,20 +154,15 @@ * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ - #define CFG_MBAR 0x10000000 /* Register Base Addrs */ - #define CFG_SCR 0x0003; #define CFG_SPR 0xffff; -#define CFG_DISCOVER_PHY -#define CFG_ENET_BD_BASE 0x380000 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ #define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -132,7 +173,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #ifdef CONFIG_MONITOR_IS_IN_RAM @@ -150,13 +191,13 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 1000 /*----------------------------------------------------------------------- @@ -169,25 +210,18 @@ */ #define CFG_BR0_PRELIM 0xFFE00201 #define CFG_OR0_PRELIM 0xFFE00014 - #define CFG_BR1_PRELIM 0 #define CFG_OR1_PRELIM 0 - #define CFG_BR2_PRELIM 0x30000001 #define CFG_OR2_PRELIM 0xFFF80000 - #define CFG_BR3_PRELIM 0 #define CFG_OR3_PRELIM 0 - #define CFG_BR4_PRELIM 0 #define CFG_OR4_PRELIM 0 - #define CFG_BR5_PRELIM 0 #define CFG_OR5_PRELIM 0 - #define CFG_BR6_PRELIM 0 #define CFG_OR6_PRELIM 0 - #define CFG_BR7_PRELIM 0x00000701 #define CFG_OR7_PRELIM 0xFFC0007C @@ -197,9 +231,8 @@ #define CFG_PACNT 0x00000000 #define CFG_PADDR 0x0000 #define CFG_PADAT 0x0000 -#define CFG_PBCNT 0x55554155 /* Ethernet/UART configuration */ +#define CFG_PBCNT 0x55554155 /* Ethernet/UART configuration */ #define CFG_PBDDR 0x0000 #define CFG_PBDAT 0x0000 #define CFG_PDCNT 0x00000000 - -#endif /* _M5272C3_H */ +#endif /* _M5272C3_H */ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index f2a7644..3c17c1e 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -33,15 +33,17 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5282 /* define processor type */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5282 /* define processor type */ -#define FEC_ENET +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } -#define CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ +#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -50,7 +52,6 @@ #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_IS_IN_FLASH 1 - /* * BOOTP options */ @@ -59,29 +60,73 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #include +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_LOADB +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif #define CONFIG_BOOTDELAY 5 +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* CONFIG_MCFFEC */ + +#define CONFIG_HOSTNAME M5272C3 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" #define CFG_PROMPT "-> " -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x20000 @@ -91,6 +136,10 @@ #define CFG_HZ 1000000 #define CFG_CLK 64000000 +/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ + +#define CFG_MFD 0x02 /* PLL Multiplication Factor Devider */ +#define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */ /* * Low Level Configuration Settings @@ -99,15 +148,12 @@ */ #define CFG_MBAR 0x40000000 -#undef CFG_DISCOVER_PHY -#define CFG_ENET_BD_BASE 0x380000 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -117,49 +163,88 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #define CFG_INT_FLASH_BASE 0xf0000000 +#define CFG_INT_FLASH_ENABLE 0x21 /* If M5282 port is fully implemented the monitor base will be behind * the vector table. */ -/* #define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) */ -#define CFG_MONITOR_BASE 0x20000 +#if (TEXT_BASE != CFG_INT_FLASH_BASE) +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#else +#define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ +#endif #define CFG_MONITOR_LEN 0x20000 #define CFG_MALLOC_LEN (256 << 10) #define CFG_BOOTPARAMS_LEN 64*1024 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_SECT 35 -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_FLASH_ERASE_TOUT 10000000 +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI + +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#endif /*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 - /*----------------------------------------------------------------------- * Memory bank definitions */ - - +#define CFG_CS0_BASE CFG_FLASH_BASE +#define CFG_CS0_SIZE 2*1024*1024 +#define CFG_CS0_WIDTH 16 +#define CFG_CS0_RO 0 +#define CFG_CS0_WS 6 +/* +#define CFG_CS3_BASE 0xE0000000 +#define CFG_CS3_SIZE 1*1024*1024 +#define CFG_CS3_WIDTH 16 +#define CFG_CS3_RO 0 +#define CFG_CS3_WS 6 +*/ /*----------------------------------------------------------------------- * Port configuration */ +#define CFG_PACNT 0x0000000 /* Port A D[31:24] */ +#define CFG_PADDR 0x0000000 +#define CFG_PADAT 0x0000000 + +#define CFG_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CFG_PBDDR 0x0000000 +#define CFG_PBDAT 0x0000000 + +#define CFG_PCCNT 0x0000000 /* Port C D[15:08] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 + +#define CFG_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 +#define CFG_PEHLPAR 0xC0 +#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ +#define CFG_DDRUA 0x05 +#define CFG_PJPAR 0xFF; -#endif /* _CONFIG_M5282EVB_H */ +#endif /* _CONFIG_M5282EVB_H */ -- cgit v1.1 From a605aacd8324094199402816cc6d9124aba57b8d Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 05:04:31 -0500 Subject: ColdFire: Add M5249EVB platform for MCF52x2 Signed-off-by: TsiChungLiew --- Makefile | 3 + board/freescale/m5249evb/Makefile | 44 ++++++++ board/freescale/m5249evb/config.mk | 25 +++++ board/freescale/m5249evb/m5249evb.c | 114 +++++++++++++++++++++ board/freescale/m5249evb/u-boot.lds | 146 +++++++++++++++++++++++++++ include/configs/M5249EVB.h | 195 ++++++++++++++++++++++++++++++++++++ 6 files changed, 527 insertions(+) create mode 100644 board/freescale/m5249evb/Makefile create mode 100644 board/freescale/m5249evb/config.mk create mode 100644 board/freescale/m5249evb/m5249evb.c create mode 100644 board/freescale/m5249evb/u-boot.lds create mode 100644 include/configs/M5249EVB.h diff --git a/Makefile b/Makefile index 79ab40b..af49438 100644 --- a/Makefile +++ b/Makefile @@ -1639,6 +1639,9 @@ ZPC1900_config: unconfig ## Coldfire ######################################################################### +M5249EVB_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale + cobra5272_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 diff --git a/board/freescale/m5249evb/Makefile b/board/freescale/m5249evb/Makefile new file mode 100644 index 0000000..424ab1c --- /dev/null +++ b/board/freescale/m5249evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5249evb/config.mk b/board/freescale/m5249evb/config.mk new file mode 100644 index 0000000..ccb2cf7 --- /dev/null +++ b/board/freescale/m5249evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xffe00000 diff --git a/board/freescale/m5249evb/m5249evb.c b/board/freescale/m5249evb/m5249evb.c new file mode 100644 index 0000000..b0bf413 --- /dev/null +++ b/board/freescale/m5249evb/m5249evb.c @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + + +/* Prototypes */ +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +int checkboard (void) { + ulong val; + uchar val8; + + puts ("Board: "); + puts("Freescale M5249EVB"); + val8 = ((uchar)~((uchar)mbar2_readLong(MCFSIM_GPIO1_READ) >> 4)) & 0xf; + printf(" (Switch=%1X)\n", val8); + + /* + * Set LED on + */ + val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CFG_GPIO1_LED; + mbar2_writeLong(MCFSIM_GPIO1_OUT, val); /* Set LED on */ + + return 0; +}; + + +long int initdram (int board_type) { + unsigned long junk = 0xa5a59696; + + /* + * Note: + * RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1 + */ + +#ifdef CFG_FAST_CLK + /* + * Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39 + */ + mbar_writeShort(MCFSIM_DCR, 0x8239); +#elif CFG_PLL_BYPASS + /* + * Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02 + */ + mbar_writeShort(MCFSIM_DCR, 0x8202); +#else + /* + * Busclk=36MHz, RefreshTime=64ms, #rows=4096 (4K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=22 (562 bus clock cycles) + */ + mbar_writeShort(MCFSIM_DCR, 0x8222); +#endif + + /* + * SDRAM starts at 0x0000_0000, CASL=10, CBM=010, PS=10 (16bit port), + * PM=1 (continuous page mode) + */ + + /* RE=0 (keep auto-refresh disabled while setting up registers) */ + mbar_writeLong(MCFSIM_DACR0, 0x00003324); + + /* BAM=007c (bits 22,21 are bank selects; 256kB blocks) */ + mbar_writeLong(MCFSIM_DMR0, 0x01fc0001); + + /** Precharge sequence **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000332c); /* Set DACR0[IP] (bit 3) */ + *((volatile unsigned long *) 0x00) = junk; /* write to a memory location to init. precharge */ + udelay(0x10); /* Allow several Precharge cycles */ + + /** Refresh Sequence **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000b324); /* Enable the refresh bit, DACR0[RE] (bit 15) */ + udelay(0x7d0); /* Allow gobs of refresh cycles */ + + /** Mode Register initialization **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000b364); /* Enable DACR0[IMRS] (bit 6); RE remains enabled */ + *((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */ + + return CFG_SDRAM_SIZE * 1024 * 1024; +}; + + +int testdram (void) { + /* TODO: XXX XXX XXX */ + printf ("DRAM test not implemented!\n"); + + return (0); +} + diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds new file mode 100644 index 0000000..a803b1c --- /dev/null +++ b/board/freescale/m5249evb/u-boot.lds @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf52x2/start.o (.text) + lib_m68k/traps.o (.text) + cpu/mcf52x2/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h new file mode 100644 index 0000000..b300b68 --- /dev/null +++ b/include/configs/M5249EVB.h @@ -0,0 +1,195 @@ +/* + * Configuation settings for the esd TASREG board. + * + * (C) Copyright 2004 + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5249EVB_H +#define _M5249EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5249 /* define processor type */ + +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG + +#undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ + +/* + * BOOTP options + */ +#undef CONFIG_BOOTP_BOOTFILESIZE +#undef CONFIG_BOOTP_BOOTPATH +#undef CONFIG_BOOTP_GATEWAY +#undef CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include +#undef CONFIG_CMD_NET + +#define CFG_PROMPT "=> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */ +#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup */ +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ + +#define CFG_LOAD_ADDR 0x200000 /* default load address */ + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000 + +/* + * Clock configuration: enable only one of the following options + */ + +#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_FAST_CLK 1 /* MCF5249 can run at 140MHz */ +#define CFG_CLK 132025600 /* MCF5249 can run at 140MHz */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_MBAR2 0x80000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x4000 /* Address of Environment Sector*/ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x2000 /* see README - env sector total size */ + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_FLASH_BASE (CFG_CSAR0 << 16) + +#if 0 /* test-only */ +#define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ +#endif + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) + +#define CFG_MONITOR_LEN 0x20000 +#define CFG_MALLOC_LEN (1 * 1024*1024) /* Reserve 1 MB for malloc() */ +#define CFG_BOOTPARAMS_LEN 64*1024 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI + +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ + +/* CS0 - AMD Flash, address 0xffc00000 */ +#define CFG_CSAR0 0xffe0 +#define CFG_CSCR0 0x1980 /* WS=0110, AA=1, PS=10 */ +/** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/ +#define CFG_CSMR0 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ + +/* CS1 - FPGA, address 0xe0000000 */ +#define CFG_CSAR1 0xe000 +#define CFG_CSCR1 0x0d80 /* WS=0011, AA=1, PS=10 */ +#define CFG_CSMR1 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/ +#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_GPIO1_LED 0x00400000 /* user led */ + +#endif /* M5249 */ + -- cgit v1.1 From a1436a842654a8d3927d082a8ae9ee0a10da62d7 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 13:20:50 -0500 Subject: ColdFire: Add M5253EVBE platform for MCF52x2 Signed-off-by: TsiChungLiew --- CREDITS | 5 + MAKEALL | 2 + Makefile | 3 + board/freescale/m5253evbe/Makefile | 44 +++++++ board/freescale/m5253evbe/config.mk | 25 ++++ board/freescale/m5253evbe/m5253evbe.c | 133 +++++++++++++++++++++ board/freescale/m5253evbe/u-boot.lds | 144 +++++++++++++++++++++++ cpu/mcf52x2/cpu.c | 32 ++++- cpu/mcf52x2/cpu_init.c | 92 +++++++++++---- cpu/mcf52x2/interrupts.c | 13 +-- cpu/mcf52x2/speed.c | 35 +++++- cpu/mcf52x2/start.S | 6 +- doc/README.m5253evbe | 103 ++++++++++++++++ include/asm-m68k/immap.h | 25 +++- include/asm-m68k/immap_5253.h | 95 +++++++++++++++ include/asm-m68k/m5253.h | 73 ++++++++++++ include/configs/M5253EVBE.h | 213 ++++++++++++++++++++++++++++++++++ lib_m68k/interrupts.c | 2 - 18 files changed, 1010 insertions(+), 35 deletions(-) create mode 100644 board/freescale/m5253evbe/Makefile create mode 100644 board/freescale/m5253evbe/config.mk create mode 100644 board/freescale/m5253evbe/m5253evbe.c create mode 100644 board/freescale/m5253evbe/u-boot.lds create mode 100644 doc/README.m5253evbe create mode 100644 include/asm-m68k/immap_5253.h create mode 100644 include/asm-m68k/m5253.h create mode 100644 include/configs/M5253EVBE.h mode change 100644 => 100755 lib_m68k/interrupts.c diff --git a/CREDITS b/CREDITS index b31125b..b1abad3 100644 --- a/CREDITS +++ b/CREDITS @@ -494,3 +494,8 @@ E: Tsi-Chung.Liew@freescale.com D: Support for ColdFire MCF532x W: www.freescale.com +N: Hayden Fraser +E: Hayden.Fraser@freescale.com +D: Support for ColdFire MCF5253 +W: www.freescale.com + diff --git a/MAKEALL b/MAKEALL index 4467d75..890ee39 100755 --- a/MAKEALL +++ b/MAKEALL @@ -618,6 +618,8 @@ LIST_coldfire=" \ EB+MCF-EV123 \ EB+MCF-EV123_internal \ idmr \ + M5249EVB \ + M5253EVB \ M5271EVB \ M5272C3 \ M5282EVB \ diff --git a/Makefile b/Makefile index af49438..e5995eb 100644 --- a/Makefile +++ b/Makefile @@ -1642,6 +1642,9 @@ ZPC1900_config: unconfig M5249EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale +M5253EVBE_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale + cobra5272_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 diff --git a/board/freescale/m5253evbe/Makefile b/board/freescale/m5253evbe/Makefile new file mode 100644 index 0000000..424ab1c --- /dev/null +++ b/board/freescale/m5253evbe/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5253evbe/config.mk b/board/freescale/m5253evbe/config.mk new file mode 100644 index 0000000..ccb2cf7 --- /dev/null +++ b/board/freescale/m5253evbe/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xffe00000 diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c new file mode 100644 index 0000000..67fab5b --- /dev/null +++ b/board/freescale/m5253evbe/m5253evbe.c @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Hayden Fraser (Hayden.Fraser@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale MCF5253 EVBE\n"); + return 0; +}; + +long int initdram(int board_type) +{ + int i; + + /* + * Check to see if the SDRAM has already been initialized + * by a run control tool + */ + if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) { + u32 RC, dramsize; + + RC = (CFG_CLK / 1000000) >> 1; + RC = (RC * 15) >> 4; + + /* Initialize DRAM Control Register: DCR */ + mbar_writeShort(MCFSIM_DCR, (0x8400 | RC)); + + mbar_writeLong(MCFSIM_DACR0, 0x00003224); + + /* Initialize DMR0 */ + dramsize = ((CFG_SDRAM_SIZE << 20) - 1) & 0xFFFC0000; + mbar_writeLong(MCFSIM_DMR0, dramsize | 1); + + mbar_writeLong(MCFSIM_DACR0, 0x0000322c); + + /* Write to this block to initiate precharge */ + *(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5; + + /* Set RE bit in DACR */ + mbar_writeLong(MCFSIM_DACR0, + mbar_readLong(MCFSIM_DACR0) | 0x8000); + + /* Wait for at least 8 auto refresh cycles to occur */ + udelay(500); + + /* Finish the configuration by issuing the MRS */ + mbar_writeLong(MCFSIM_DACR0, + mbar_readLong(MCFSIM_DACR0) | 0x0040); + + *(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5; + } + + return CFG_SDRAM_SIZE * 1024 * 1024; +} + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#ifdef CONFIG_CMD_IDE +#include +int ide_preinit(void) +{ + return (0); +} + +void ide_set_reset(int idereset) +{ + volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR; + long period; + /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ + int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ + {50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */ + {30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */ + {30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */ + {25, 70, 20, 10, 20, 5, 10, 0, 35} /* PIO 4 */ + }; + + if (idereset) { + ata->cr = 0; /* control reset */ + udelay(100); + } else { + mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND); + +#define CALC_TIMING(t) (t + period - 1) / period + period = 1000000000 / (CFG_CLK / 2); /* period in ns */ + + /*ata->ton = CALC_TIMING (180); */ + ata->t1 = CALC_TIMING(piotms[2][0]); + ata->t2w = CALC_TIMING(piotms[2][1]); + ata->t2r = CALC_TIMING(piotms[2][1]); + ata->ta = CALC_TIMING(piotms[2][8]); + ata->trd = CALC_TIMING(piotms[2][7]); + ata->t4 = CALC_TIMING(piotms[2][3]); + ata->t9 = CALC_TIMING(piotms[2][6]); + + ata->cr = 0x40; /* IORDY enable */ + udelay(2000); + ata->cr |= 0x01; /* IORDY enable */ + } +} +#endif /* CONFIG_CMD_IDE */ + diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds new file mode 100644 index 0000000..e2fd070 --- /dev/null +++ b/board/freescale/m5253evbe/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf52x2/start.o (.text) + lib_m68k/traps.o (.text) + cpu/mcf52x2/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c index 96fe371..71ea408 100644 --- a/cpu/mcf52x2/cpu.c +++ b/cpu/mcf52x2/cpu.c @@ -205,7 +205,7 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) }; #endif -#ifdef CONFIG_M5249 /* test-only: todo... */ +#ifdef CONFIG_M5249 int checkcpu(void) { char buf[32]; @@ -225,3 +225,33 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) return 0; }; #endif + +#ifdef CONFIG_M5253 +int checkcpu(void) +{ + char buf[32]; + + unsigned char resetsource = mbar_readLong(SIM_RSR); + printf("CPU: Freescale Coldfire MCF5253 at %s MHz\n", + strmhz(buf, CFG_CLK)); + + if ((resetsource & SIM_RSR_HRST) || (resetsource & SIM_RSR_SWTR)) { + printf("Reset:%s%s\n", + (resetsource & SIM_RSR_HRST) ? " Hardware/ System Reset" + : "", + (resetsource & SIM_RSR_SWTR) ? " Software Watchdog" : + ""); + } + return 0; +} + +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + /* enable watchdog, set timeout to 0 and wait */ + mbar_writeByte(SIM_SYPCR, 0xc0); + while (1) ; + + /* we don't return! */ + return 0; +}; +#endif diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 5736d0f..f41d77b 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -6,6 +6,10 @@ * (C) Copyright 2005 * BuS Elektronik GmbH & Co. KG * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * Hayden Fraser (Hayden.Fraser@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -29,6 +33,74 @@ #include #include +#if defined(CONFIG_M5253) +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + mbar_writeByte(MCFSIM_MPARK, 0x40); /* 5249 Internal Core takes priority over DMA */ + mbar_writeByte(MCFSIM_SYPCR, 0x00); + mbar_writeByte(MCFSIM_SWIVR, 0x0f); + mbar_writeByte(MCFSIM_SWSR, 0x00); + mbar_writeByte(MCFSIM_SWDICR, 0x00); + mbar_writeByte(MCFSIM_TIMER1ICR, 0x00); + mbar_writeByte(MCFSIM_TIMER2ICR, 0x88); + mbar_writeByte(MCFSIM_I2CICR, 0x00); + mbar_writeByte(MCFSIM_UART1ICR, 0x00); + mbar_writeByte(MCFSIM_UART2ICR, 0x00); + mbar_writeByte(MCFSIM_ICR6, 0x00); + mbar_writeByte(MCFSIM_ICR7, 0x00); + mbar_writeByte(MCFSIM_ICR8, 0x00); + mbar_writeByte(MCFSIM_ICR9, 0x00); + mbar_writeByte(MCFSIM_QSPIICR, 0x00); + + mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080); + mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */ + mbar2_writeByte(MCFSIM_SPURVEC, 0x00); + + /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); *//* Enable a 1 cycle pre-drive cycle on CS1 */ + + /* + * Setup chip selects... + */ + + mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1); + mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1); + mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1); + + mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0); + mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0); + mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0); + + /* enable instruction cache now */ + icache_enable(); +} + +/*initialize higher level parts of CPU like timers */ +int cpu_init_r(void) +{ + return (0); +} + +void uart_port_conf(void) +{ + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + break; + case 1: + break; + case 2: + break; + } +} +#endif /* #if defined(CONFIG_M5253) */ + #if defined(CONFIG_M5271) void cpu_init_f(void) { @@ -394,26 +466,6 @@ void uart_port_conf(void) */ void cpu_init_f(void) { -#ifndef CFG_PLL_BYPASS - /* - * Setup the PLL to run at the specified speed - * - */ - volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); - unsigned long pllcr; -#ifdef CFG_FAST_CLK - pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ -#else - pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ -#endif - cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ - mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */ - mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */ - pllcr ^= 0x00000001; /* Set pll bypass to 1 */ - mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ - udelay(0x20); /* Wait for a lock ... */ -#endif /* #ifndef CFG_PLL_BYPASS */ - /* * NOTE: by setting the GPIO_FUNCTION registers, we ensure that the UART pins * (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c index d9a35bb..2ccbde5 100644 --- a/cpu/mcf52x2/interrupts.c +++ b/cpu/mcf52x2/interrupts.c @@ -1,9 +1,10 @@ /* - * (C) Copyright 2003 Josef Baumgartner - * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -82,7 +83,7 @@ void dtimer_intr_setup(void) #endif /* CONFIG_MCFTMR */ #endif /* CONFIG_M5282 | CONFIG_M5271 */ -#ifdef CONFIG_M5249 +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) int interrupt_init(void) { enable_interrupts(); @@ -94,9 +95,7 @@ int interrupt_init(void) void dtimer_intr_setup(void) { mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400); - mbar_writeByte(MCFSIM_TIMER2ICR, - MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | - MCFSIM_ICR_PRI3); + mbar_writeByte(MCFSIM_TIMER2ICR, CFG_TMRINTR_PRI); } #endif /* CONFIG_MCFTMR */ -#endif /* CONFIG_M5249 */ +#endif /* CONFIG_M5249 || CONFIG_M5253 */ diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c index ac860b2..bc1e200 100644 --- a/cpu/mcf52x2/speed.c +++ b/cpu/mcf52x2/speed.c @@ -2,6 +2,9 @@ * (C) Copyright 2003 * Josef Baumgartner * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Hayden Fraser (Hayden.Fraser@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -23,6 +26,7 @@ #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -31,8 +35,37 @@ DECLARE_GLOBAL_DATA_PTR; */ int get_clocks (void) { - gd->cpu_clk = CFG_CLK; +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) + volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); + unsigned long pllcr; + +#ifndef CFG_PLL_BYPASS + #ifdef CONFIG_M5249 + /* Setup the PLL to run at the specified speed */ +#ifdef CFG_FAST_CLK + pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ +#else + pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ +#endif +#endif /* CONFIG_M5249 */ + +#ifdef CONFIG_M5253 + pllcr = CFG_PLLCR; +#endif /* CONFIG_M5253 */ + + cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ + mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */ + mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */ + pllcr ^= 0x00000001; /* Set pll bypass to 1 */ + mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ + udelay(0x20); /* Wait for a lock ... */ +#endif /* #ifndef CFG_PLL_BYPASS */ + +#endif /* CONFIG_M5249 || CONFIG_M5253 */ + + gd->cpu_clk = CFG_CLK; +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) gd->bus_clk = gd->cpu_clk / 2; #else gd->bus_clk = gd->cpu_clk; diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 6783d4d..686e2a5 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -121,7 +121,7 @@ _start: nop move.w #0x2700,%sr -#if defined(CONFIG_M5272) || defined(CONFIG_M5249) +#if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253) move.l #(CFG_MBAR + 1), %d0 /* set MBAR address + valid flag */ move.c %d0, %MBAR @@ -133,7 +133,7 @@ _start: move.l #(CFG_INIT_RAM_ADDR + 1), %d0 movec %d0, %RAMBAR0 -#endif /* #if defined(CONFIG_M5272) || defined(CONFIG_M5249) */ +#endif /* CONFIG_M5272 || CONFIG_M5249 || CONFIG_M5253 */ #if defined(CONFIG_M5282) || defined(CONFIG_M5271) /* Initialize IPSBAR */ @@ -407,7 +407,7 @@ icache_state_access_1: rts #endif -#ifdef CONFIG_M5249 +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) .globl icache_enable icache_enable: /* diff --git a/doc/README.m5253evbe b/doc/README.m5253evbe new file mode 100644 index 0000000..7f2afcf --- /dev/null +++ b/doc/README.m5253evbe @@ -0,0 +1,103 @@ +Freescale Amadeus Plus M5253EVBE board +====================================== + +Hayden Fraser(Hayden.Fraser@freescale.com) +Created 06/05/2007 +=========================================== + + +1. SWITCH SETTINGS +================== +1.1 N/A + + +2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL +=========================================== +2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and + linux kernel, you can customize it based on your system requirements: + SDR: 0x00000000-0x00ffffff + SRAM0: 0x20010000-0x20017fff + SRAM1: 0x20000000-0x2000ffff + MBAR1: 0x10000000-0x4fffffff + MBAR2: 0x80000000-0xCfffffff + Flash: 0xffe00000-0xffffffff + +3. DEFINITIONS AND COMPILATION +============================== +3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h + CONFIG_MCF52x2 Processor family + CONFIG_MCF5253 MCF5253 specific + CONFIG_M5253EVBE Amadeus Plus board specific + CFG_CLK Define Amadeus Plus CPU Clock + CFG_MBAR MBAR base address + CFG_MBAR2 MBAR2 base address + +3.2 Compilation + export CROSS_COMPILE=/usr/local/freescale-coldfire-4.1-elf/bin/m68k-elf- + cd u-boot-1-2-x + make distclean + make M5253EVBE_config + make + + +4. SCREEN DUMP +============== +4.1 U-Boot 1.2.0 (Jun 18 2007 - 18:20:00) + +CPU: Freescale Coldfire MCF5253 at 62 MHz +Board: Freescale MCF5253 EVBE +DRAM: 16 MB +FLASH: 2 MB +In: serial +Out: serial +Err: serial +=> flinfo + +Bank # 1: CFI conformant FLASH (16 x 16) Size: 2 MB in 35 Sectors + AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x49 + Erase timeout: 16384 ms, write timeout: 1 ms + + Sector Start Addresses: + FFE00000 RO FFE04000 RO FFE06000 RO FFE08000 RO FFE10000 RO + FFE20000 FFE30000 FFE40000 FFE50000 FFE60000 + FFE70000 FFE80000 FFE90000 FFEA0000 FFEB0000 + FFEC0000 FFED0000 FFEE0000 FFEF0000 FFF00000 + FFF10000 FFF20000 FFF30000 FFF40000 FFF50000 + FFF60000 FFF70000 FFF80000 FFF90000 FFFA0000 + FFFB0000 FFFC0000 FFFD0000 FFFE0000 FFFF0000 + +=> bdinfo +boot_params = 0x00F62F90 +memstart = 0x00000000 +memsize = 0x01000000 +flashstart = 0xFFE00000 +flashsize = 0x00200000 +flashoffset = 0x00000000 +baudrate = 19200 bps + +=> printenv +bootdelay=5 +baudrate=19200 +stdin=serial +stdout=serial +stderr=serial + +Environment size: 134/8188 bytes +=> saveenv +Saving Environment to Flash... +Un-Protected 1 sectors +Erasing Flash... +. done +Erased 1 sectors +Writing to Flash... done +Protected 1 sectors +=> + +5. COMPILER +----------- +To create U-Boot the CodeSourcery's version of the GNU Toolchain for the ColdFire architecture +compiler set (freescale-coldfire-4.1-elf) from www.codesourcery.com was used. +You can download it from:http://www.codesourcery.com/gnu_toolchains/coldfire/download.html + +compiler that you used - for example, codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M +codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 3ee7071..bf7b51b 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -43,11 +43,34 @@ #define CFG_TMRINTR_NO (31) #define CFG_TMRINTR_MASK (0x00000400) #define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) -#define CFG_TMRINTR_PRI (0) /* Level must include inorder to work */ +#define CFG_TMRINTR_PRI (MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3) #define CFG_TIMER_PRESCALER (((gd->bus_clk / 2000000) - 1) << 8) #endif #endif /* CONFIG_M5249 */ +#ifdef CONFIG_M5253 +#include +#include +#include + +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40)) + +#define CFG_INTR_BASE (MMAP_INTC) +#define CFG_NUM_IRQS (64) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRPND_REG (mbar_readLong(MCFSIM_IPR)) +#define CFG_TMRINTR_NO (27) +#define CFG_TMRINTR_MASK (0x00000400) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL3 | MCFSIM_ICR_PRI3) +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 2000000) - 1) << 8) +#endif +#endif /* CONFIG_M5253 */ + #ifdef CONFIG_M5271 #include #include diff --git a/include/asm-m68k/immap_5253.h b/include/asm-m68k/immap_5253.h new file mode 100644 index 0000000..aafbdd0 --- /dev/null +++ b/include/asm-m68k/immap_5253.h @@ -0,0 +1,95 @@ +/* + * MCF5253 Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5249__ +#define __IMMAP_5249__ + +#define MMAP_INTC (CFG_MBAR + 0x00000040) +#define MMAP_DTMR0 (CFG_MBAR + 0x00000140) +#define MMAP_DTMR1 (CFG_MBAR + 0x00000180) +#define MMAP_UART0 (CFG_MBAR + 0x000001C0) +#define MMAP_UART1 (CFG_MBAR + 0x00000200) +#define MMAP_I2C0 (CFG_MBAR + 0x00000280) +#define MMAP_QSPI (CFG_MBAR + 0x00000400) +#define MMAP_CAN0 (CFG_MBAR + 0x00010000) +#define MMAP_CAN1 (CFG_MBAR + 0x00011000) + +#define MMAP_I2C1 (CFG_MBAR2 + 0x00000440) +#define MMAP_UART2 (CFG_MBAR2 + 0x00000C00) + +/********************************************************************* +* ATA Module (ATAC) +*********************************************************************/ + +/* Register read/write struct */ +typedef struct atac { + /* PIO */ + u8 toff; /* 0x00 */ + u8 ton; /* 0x01 */ + u8 t1; /* 0x02 */ + u8 t2w; /* 0x03 */ + u8 t2r; /* 0x04 */ + u8 ta; /* 0x05 */ + u8 trd; /* 0x06 */ + u8 t4; /* 0x07 */ + u8 t9; /* 0x08 */ + + /* DMA */ + u8 tm; /* 0x09 */ + u8 tn; /* 0x0A */ + u8 td; /* 0x0B */ + u8 tk; /* 0x0C */ + u8 tack; /* 0x0D */ + u8 tenv; /* 0x0E */ + u8 trp; /* 0x0F */ + u8 tzah; /* 0x10 */ + u8 tmli; /* 0x11 */ + u8 tdvh; /* 0x12 */ + u8 tdzfs; /* 0x13 */ + u8 tdvs; /* 0x14 */ + u8 tcvh; /* 0x15 */ + u8 tss; /* 0x16 */ + u8 tcyc; /* 0x17 */ + + /* FIFO */ + u32 fifo32; /* 0x18 */ + u16 fifo16; /* 0x1C */ + u8 rsvd0[2]; + u8 ffill; /* 0x20 */ + u8 rsvd1[3]; + + /* ATA */ + u8 cr; /* 0x24 */ + u8 rsvd2[3]; + u8 isr; /* 0x28 */ + u8 rsvd3[3]; + u8 ier; /* 0x2C */ + u8 rsvd4[3]; + u8 icr; /* 0x30 */ + u8 rsvd5[3]; + u8 falarm; /* 0x34 */ +} atac_t; + +#endif /* __IMMAP_5249__ */ diff --git a/include/asm-m68k/m5253.h b/include/asm-m68k/m5253.h new file mode 100644 index 0000000..eda3472 --- /dev/null +++ b/include/asm-m68k/m5253.h @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef m5253_h +#define m5253_h +/****************************************************************************/ + +/* +* PLL Module (PLL) +*/ + +/* Register read/write macros */ +#define PLL_PLLCR (0x000180) + +#define SIM_RSR (0x000000) +#define SIM_SYPCR (0x000001) +#define SIM_SWIVR (0x000002) +#define SIM_SWSR (0x000003) +#define SIM_MPARK (0x00000C) + +/* Bit definitions and macros for RSR */ +#define SIM_RSR_SWTR (0x20) +#define SIM_RSR_HRST (0x80) + +/* Register read/write macros */ +#define CIM_MISCCR (0x000500) +#define CIM_ATA_DADDR (0x000504) +#define CIM_ATA_DCOUNT (0x000508) +#define CIM_RTC_TIME (0x00050C) +#define CIM_USB_CANCLK (0x000510) + +/* Bit definitions and macros for MISCCR */ +#define CIM_MISCCR_ADTA (0x00000001) +#define CIM_MISCCR_ADTD (0x00000002) +#define CIM_MISCCR_ADIE (0x00000004) +#define CIM_MISCCR_ADIC (0x00000008) +#define CIM_MISCCR_ADIP (0x00000010) +#define CIM_MISCCR_CPUEND (0x00000020) +#define CIM_MISCCR_DMAEND (0x00000040) +#define CIM_MISCCR_RTCCLR (0x00000080) +#define CIM_MISCCR_RTCPL (0x00000100) +#define CIM_MISCCR_URIE (0x00000800) +#define CIM_MISCCR_URIC (0x00001000) +#define CIM_MISCCR_URIP (0x00002000) + +/* Bit definitions and macros for ATA_DADDR */ +#define CIM_ATA_DADDR_ATAADDR(x) (((x)&0x00003FFF)<<2) +#define CIM_ATA_DADDR_RAMADDR(x) (((x)&0x00003FFF)<<18) + +/* Bit definitions and macros for ATA_DCOUNT */ +#define CIM_ATA_DCOUNT_COUNT(x) (((x)&0x0000FFFF)) + +#endif /* m5253_h */ diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h new file mode 100644 index 0000000..9ad74e2 --- /dev/null +++ b/include/configs/M5253EVBE.h @@ -0,0 +1,213 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Hayden Fraser (Hayden.Fraser@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _M5253EVBE_H +#define _M5253EVBE_H + +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5253 /* define processor type */ +#define CONFIG_M5253EVBE /* define board type */ + +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG /* disable watchdog */ + +#define CONFIG_BOOTDELAY 5 + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#else +#define CFG_ENV_ADDR 0xffe04000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +/* + * BOOTP options + */ +#undef CONFIG_BOOTP_BOOTFILESIZE +#undef CONFIG_BOOTP_BOOTPATH +#undef CONFIG_BOOTP_GATEWAY +#undef CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include +#undef CONFIG_CMD_NET +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC + +/* ATA */ +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_IDE_RESET 1 +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_ATAPI +#undef CONFIG_LBA48 + +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 2 + +#define CFG_ATA_BASE_ADDR (CFG_MBAR2 + 0x800) +#define CFG_ATA_IDE0_OFFSET 0 + +#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 4 /* Interval between registers */ +#define _IO_BASE 0 + +#define CFG_PROMPT "=> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x00100000 + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000 + +#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_FAST_CLK +#ifdef CFG_FAST_CLK +# define CFG_PLLCR 0x1243E054 +# define CFG_CLK 140000000 +#else +# define CFG_PLLCR 0x135a4140 +# define CFG_CLK 70000000 +#endif + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_MBAR2 0x80000000 /* Module Base Addrs 2 */ + +/* + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ + +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CFG_MONITOR_BASE 0x20000 +#else +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#endif + +#define CFG_MONITOR_LEN 0x40000 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN (64*1024) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/* FLASH organization */ +#define CFG_FLASH_BASE 0xffe00000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 + +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_SIZE 0x200000 +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +/* Cache Configuration */ +#define CFG_CACHELINE_SIZE 16 + +/* Port configuration */ +#define CFG_FECI2C 0xF0 + +#define CFG_CSAR0 0xFFE0 +#define CFG_CSMR0 0x001F0021 +#define CFG_CSCR0 0x1D80 + +#define CFG_CSAR1 0 +#define CFG_CSMR1 0 +#define CFG_CSCR1 0 + +#define CFG_CSAR2 0 +#define CFG_CSMR2 0 +#define CFG_CSCR2 0 + +#define CFG_CSAR3 0 +#define CFG_CSMR3 0 +#define CFG_CSCR3 0 + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ +#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_GPIO1_LED 0x00400000 /* user led */ + +#endif /* _M5253EVB_H */ + diff --git a/lib_m68k/interrupts.c b/lib_m68k/interrupts.c old mode 100644 new mode 100755 index 8919c0e..1635d6f --- a/lib_m68k/interrupts.c +++ b/lib_m68k/interrupts.c @@ -106,8 +106,6 @@ void int_handler (struct pt_regs *fp) vec = (fp->vector >> 2) & 0xff; if (vec > 0x40) vec -= 0x40; - else - return; if (irq_vecs[vec].handler != NULL) { irq_vecs[vec].handler (irq_vecs[vec].arg); -- cgit v1.1 From 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 15:05:11 -0500 Subject: ColdFire: Add M54455EVB for MCF5445x Signed-off-by: TsiChungLiew --- CREDITS | 2 +- MAINTAINERS | 9 + MAKEALL | 1 + Makefile | 28 + README | 1 + board/freescale/m54455evb/Makefile | 44 + board/freescale/m54455evb/config.mk | 25 + board/freescale/m54455evb/flash.c | 974 +++++++++++++++++++++ board/freescale/m54455evb/m54455evb.c | 165 ++++ board/freescale/m54455evb/mii.c | 320 +++++++ board/freescale/m54455evb/u-boot.lds | 144 +++ common/cmd_bdinfo.c | 22 +- cpu/mcf5445x/Makefile | 48 + cpu/mcf5445x/config.mk | 27 + cpu/mcf5445x/cpu.c | 97 +++ cpu/mcf5445x/cpu_init.c | 140 +++ cpu/mcf5445x/interrupts.c | 52 ++ cpu/mcf5445x/pci.c | 189 ++++ cpu/mcf5445x/speed.c | 186 ++++ cpu/mcf5445x/start.S | 388 +++++++++ doc/README.m54455evb | 416 +++++++++ drivers/net/mcffec.c | 27 +- include/asm-m68k/global_data.h | 8 + include/asm-m68k/immap.h | 40 + include/asm-m68k/immap_5445x.h | 937 ++++++++++++++++++++ include/asm-m68k/m5445x.h | 1541 +++++++++++++++++++++++++++++++++ include/asm-m68k/rtc.h | 3 +- include/asm-m68k/u-boot.h | 8 + include/configs/M54455EVB.h | 391 +++++++++ lib_m68k/board.c | 30 +- lib_m68k/interrupts.c | 0 lib_m68k/m68k_linux.c | 376 ++++---- 32 files changed, 6459 insertions(+), 180 deletions(-) create mode 100644 board/freescale/m54455evb/Makefile create mode 100644 board/freescale/m54455evb/config.mk create mode 100644 board/freescale/m54455evb/flash.c create mode 100644 board/freescale/m54455evb/m54455evb.c create mode 100644 board/freescale/m54455evb/mii.c create mode 100644 board/freescale/m54455evb/u-boot.lds create mode 100644 cpu/mcf5445x/Makefile create mode 100644 cpu/mcf5445x/config.mk create mode 100644 cpu/mcf5445x/cpu.c create mode 100644 cpu/mcf5445x/cpu_init.c create mode 100644 cpu/mcf5445x/interrupts.c create mode 100644 cpu/mcf5445x/pci.c create mode 100644 cpu/mcf5445x/speed.c create mode 100644 cpu/mcf5445x/start.S create mode 100644 doc/README.m54455evb create mode 100644 include/asm-m68k/immap_5445x.h create mode 100644 include/asm-m68k/m5445x.h create mode 100644 include/configs/M54455EVB.h mode change 100755 => 100644 lib_m68k/interrupts.c diff --git a/CREDITS b/CREDITS index b1abad3..f30b222 100644 --- a/CREDITS +++ b/CREDITS @@ -491,7 +491,7 @@ W: www.monstr.eu N: TsiChung Liew E: Tsi-Chung.Liew@freescale.com -D: Support for ColdFire MCF532x +D: Support for ColdFire MCF532x, MCF5445x W: www.freescale.com N: Hayden Fraser diff --git a/MAINTAINERS b/MAINTAINERS index d5249e5..7fde6d9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -606,6 +606,15 @@ Zachary P. Landau r5200 mcf52x2 +TsiChung Liew + + M5329EVB mcf532x + M54455EVB mcf5445x + +Hayden Fraser + + M5253EVBE mcf52x2 + ######################################################################### # AVR32 Systems: # # # diff --git a/MAKEALL b/MAKEALL index 890ee39..b7ed0f4 100755 --- a/MAKEALL +++ b/MAKEALL @@ -624,6 +624,7 @@ LIST_coldfire=" \ M5272C3 \ M5282EVB \ M5329EVB \ + M54455EVB \ r5200 \ TASREG \ " diff --git a/Makefile b/Makefile index e5995eb..201ad0e 100644 --- a/Makefile +++ b/Makefile @@ -1692,6 +1692,34 @@ M5329BFEE_config : unconfig fi @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale +M54455EVB_config \ +M54455EVB_atmel_config \ +M54455EVB_intel_config \ +M54455EVB_a33_config \ +M54455EVB_a66_config \ +M54455EVB_i33_config \ +M54455EVB_i66_config : unconfig + @case "$@" in \ + M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ + M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ + M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ + M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ + M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ + M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ + M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ + esac; \ + >include/config.h ; \ + if [ "$${FLASH}" == "INTEL" ] ; then \ + echo "#undef CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "... with INTEL boot..." ; \ + else \ + echo "#define CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "... with ATMEL boot..." ; \ + fi; \ + echo "#define CFG_INPUT_CLKSRC $${FREQ}" >>include/config.h ; \ + echo "... with $${FREQ}Hz input clock" + @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale + ######################################################################### ## MPC83xx Systems ######################################################################### diff --git a/README b/README index 4f2acb4..4b1982b 100644 --- a/README +++ b/README @@ -137,6 +137,7 @@ Directory Hierarchy: - ixp Files specific to Intel XScale IXP CPUs - mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs - mcf532x Files specific to Freescale ColdFire MCF5329 CPUs + - mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs - mips Files specific to MIPS CPUs - mpc5xx Files specific to Freescale MPC5xx CPUs - mpc5xxx Files specific to Freescale MPC5xxx CPUs diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile new file mode 100644 index 0000000..ca9a772 --- /dev/null +++ b/board/freescale/m54455evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o flash.o mii.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### \ No newline at end of file diff --git a/board/freescale/m54455evb/config.mk b/board/freescale/m54455evb/config.mk new file mode 100644 index 0000000..ce014ed --- /dev/null +++ b/board/freescale/m54455evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m54455evb/flash.c b/board/freescale/m54455evb/flash.c new file mode 100644 index 0000000..de2cca8 --- /dev/null +++ b/board/freescale/m54455evb/flash.c @@ -0,0 +1,974 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#include + +#ifndef CFG_FLASH_CFI +typedef unsigned char FLASH_PORT_WIDTH; +typedef volatile unsigned char FLASH_PORT_WIDTHV; + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT +#define CFG_FLASH_NONCFI_WIDTH FLASH_CFI_8BIT + +/* Intel-compatible flash commands */ +#define INTEL_PROGRAM 0x00100010 +#define INTEL_ERASE 0x00200020 +#define INTEL_WRSETUP 0x00400040 +#define INTEL_CLEAR 0x00500050 +#define INTEL_LOCKBIT 0x00600060 +#define INTEL_PROTECT 0x00010001 +#define INTEL_STATUS 0x00700070 +#define INTEL_READID 0x00900090 +#define INTEL_CFIQRY 0x00980098 +#define INTEL_SUSERASE 0x00B000B0 +#define INTEL_PROTPROG 0x00C000C0 +#define INTEL_CONFIRM 0x00D000D0 +#define INTEL_WRBLK 0x00e800e8 +#define INTEL_RESET 0x00FF00FF + +/* Intel-compatible flash status bits */ +#define INTEL_FINISHED 0x00800080 +#define INTEL_OK 0x00800080 +#define INTEL_ERASESUS 0x00600060 +#define INTEL_WSM_SUS (INTEL_FINISHED | INTEL_ERASESUS) + +/* 28F160C3B CFI Data offset - This could vary */ +#define INTEL_CFI_MFG 0x00 /* Manufacturer ID */ +#define INTEL_CFI_PART 0x01 /* Product ID */ +#define INTEL_CFI_LOCK 0x02 /* */ +#define INTEL_CFI_TWPRG 0x1F /* Typical Single Word Program Timeout 2^n us */ +#define INTEL_CFI_MBUFW 0x20 /* Typical Max Buffer Write Timeout 2^n us */ +#define INTEL_CFI_TERB 0x21 /* Typical Block Erase Timeout 2^n ms */ +#define INTEL_CFI_MWPRG 0x23 /* Maximum Word program timeout 2^n us */ +#define INTEL_CFI_MERB 0x25 /* Maximum Block Erase Timeout 2^n s */ +#define INTEL_CFI_SIZE 0x27 /* Device size 2^n bytes */ +#define INTEL_CFI_CAP 0x28 +#define INTEL_CFI_WRBUF 0x2A +#define INTEL_CFI_BANK 0x2C /* Number of Bank */ +#define INTEL_CFI_BLK1A 0x2D /* Number of Blocks */ +#define INTEL_CFI_BLK1B 0x2E /* Number of Blocks */ +#define INTEL_CFI_SZ1A 0x2F /* Block Region Size */ +#define INTEL_CFI_SZ1B 0x30 +#define INTEL_CFI_BLK2A 0x31 +#define INTEL_CFI_BLK2B 0x32 +#define INTEL_CFI_SZ2A 0x33 +#define INTEL_CFI_SZ2B 0x34 + +#define FLASH_CYCLE1 0x0555 +#define FLASH_CYCLE2 0x0aaa + +#define WR_BLOCK 0x20 + +/* not in the flash.h yet */ +#define FLASH_28F64P30T 0x00B9 /* Intel 28F64P30T ( 64M) */ +#define FLASH_28F64P30B 0x00BA /* Intel 28F64P30B ( 64M) */ +#define FLASH_28F128P30T 0x00BB /* Intel 28F128P30T ( 128M = 8M x 16 ) */ +#define FLASH_28F128P30B 0x00BC /* Intel 28F128P30B ( 128M = 8M x 16 ) */ +#define FLASH_28F256P30T 0x00BD /* Intel 28F256P30T ( 256M = 16M x 16 ) */ +#define FLASH_28F256P30B 0x00BE /* Intel 28F256P30B ( 256M = 16M x 16 ) */ + +#define SYNC __asm__("nop") + +/*----------------------------------------------------------------------- + * Functions + */ + +ulong flash_get_size(FPWV * addr, flash_info_t * info); +int flash_get_offsets(ulong base, flash_info_t * info); +int flash_cmd_rd(volatile u16 * addr, int index); +int write_data(flash_info_t * info, ulong dest, FPW data); +int write_data_block(flash_info_t * info, ulong src, ulong dest); +int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data); +void inline spin_wheel(void); +void flash_sync_real_protect(flash_info_t * info); +uchar intel_sector_protected(flash_info_t * info, ushort sector); + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +ulong flash_init(void) +{ + int i; + ulong size = 0; + ulong fbase = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + memset(&flash_info[i], 0, sizeof(flash_info_t)); + + switch (i) { + case 0: + fbase = (ulong) CFG_FLASH0_BASE; + break; + case 1: + fbase = (ulong) CFG_FLASH1_BASE; + break; + } + + flash_get_size((FPWV *) fbase, &flash_info[i]); + flash_get_offsets((ulong) fbase, &flash_info[i]); + fbase += flash_info[i].size; + size += flash_info[i].size; + + /* get the h/w and s/w protection status in sync */ + flash_sync_real_protect(&flash_info[i]); + } + + /* Protect monitor and environment sectors */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); + + return size; +} + +int flash_get_offsets(ulong base, flash_info_t * info) +{ + int i, j, k; + int sectors, bs, banks; + ulong start; + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_ATM) { + int sect[] = CFG_ATMEL_SECT; + int sectsz[] = CFG_ATMEL_SECTSZ; + + info->start[0] = base; + for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) { + for (j = 0; j < sect[i]; j++, k++) { + info->start[k + 1] = info->start[k] + sectsz[i]; + info->protect[k] = 0; + } + } + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + volatile u16 *addr16 = (volatile u16 *)base; + + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + *addr16 = (FPW) INTEL_READID; + + banks = addr16[INTEL_CFI_BANK] & 0xff; + + sectors = 0; + info->start[0] = base; + + for (k = 0, i = 0; i < banks; i++) { + /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. + * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count + * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count + */ + bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8) + | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) * + 0x100); + sectors = + (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1; + + for (j = 0; j < sectors; j++, k++) { + info->start[k + 1] = info->start[k] + bs; + } + } + + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + } + + return ERR_OK; +} + +void flash_print_info(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf("INTEL "); + break; + case FLASH_MAN_ATM: + printf("ATMEL "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AT040: + printf("AT49BV040A\n"); + break; + case FLASH_28F128J3A: + printf("Intel 28F128J3A\n"); + break; + default: + printf("Unknown Chip Type\n"); + return; + } + + if (info->size > 0x100000) { + int remainder; + + printf(" Size: %ld", info->size >> 20); + + remainder = (info->size % 0x100000); + if (remainder) { + remainder >>= 10; + remainder = (int)((float) + (((float)remainder / (float)1024) * + 10000)); + printf(".%d ", remainder); + } + + printf("MB in %d Sectors\n", info->sector_count); + } else + printf(" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], info->protect[i] ? " (RO)" : " "); + } + printf("\n"); +} + +/* + * The following code cannot be run from FLASH! + */ +ulong flash_get_size(FPWV * addr, flash_info_t * info) +{ + volatile u16 *addr16 = (volatile u16 *)addr; + int intel = 0, banks = 0; + u16 value; + int i; + + addr[FLASH_CYCLE1] = (FPWV) 0x00AA00AA; /* for Atmel, Intel ignores this */ + addr[FLASH_CYCLE2] = (FPWV) 0x00550055; /* for Atmel, Intel ignores this */ + addr[FLASH_CYCLE1] = (FPWV) 0x00900090; /* selects Intel or Atmel */ + + switch (addr[0] & 0xff) { + case (u8) ATM_MANUFACT: + info->flash_id = FLASH_MAN_ATM; + value = addr[1]; + break; + case (u8) INTEL_MANUFACT: + /* Terminate Atmel ID read */ + addr[0] = (FPWV) 0x00F000F0; + /* Write auto select command: read Manufacturer ID */ + /* Write auto select command sequence and test FLASH answer */ + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + *addr16 = (FPW) INTEL_READID; + + info->flash_id = FLASH_MAN_INTEL; + value = (addr16[INTEL_CFI_MFG] << 8); + value |= addr16[INTEL_CFI_PART] & 0xff; + intel = 1; + break; + default: + printf("Unknown Flash\n"); + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + + *addr = (FPW) 0x00F000F0; + *addr = (FPW) INTEL_RESET; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + switch (value) { + case (u8) ATM_ID_LV040: + info->flash_id += FLASH_AT040; + break; + case (u16) INTEL_ID_28F128J3: + info->flash_id += FLASH_28F128J3A; + break; + case (u16) INTEL_ID_28F64P30T: + info->flash_id += FLASH_28F64P30T; + break; + case (u16) INTEL_ID_28F64P30B: + info->flash_id += FLASH_28F64P30B; + break; + case (u16) INTEL_ID_28F128P30T: + info->flash_id += FLASH_28F128P30T; + break; + case (u16) INTEL_ID_28F128P30B: + info->flash_id += FLASH_28F128P30B; + break; + case (u16) INTEL_ID_28F256P30T: + info->flash_id += FLASH_28F256P30T; + break; + case (u16) INTEL_ID_28F256P30B: + info->flash_id += FLASH_28F256P30B; + break; + default: + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (intel) { + /* Intel spec. under CFI section */ + u32 sz; + int sectors, bs; + + banks = addr16[INTEL_CFI_BANK] & 0xff; + + sectors = sz = 0; + for (i = 0; i < banks; i++) { + /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. + * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count + * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count + */ + bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8) + | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) * + 0x100); + sectors += + (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1; + sz += (bs * sectors); + } + + info->sector_count = sectors; + info->size = sz; + *addr = (FPW) INTEL_RESET; /* restore read mode */ + } else { + int sect[] = CFG_ATMEL_SECT; + int sectsz[] = CFG_ATMEL_SECTSZ; + + info->sector_count = 0; + info->size = 0; + for (i = 0; i < CFG_ATMEL_REGION; i++) { + info->sector_count += sect[i]; + info->size += sect[i] * sectsz[i]; + } + + /* reset ID mode */ + addr[0] = (FPWV) 0x00F000F0; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + return (info->size); +} + +int flash_cmd_rd(volatile u16 * addr, int index) +{ + return (int)addr[index]; +} + +/* + * This function gets the u-boot flash sector protection status + * (flash_info_t.protect[]) in sync with the sector protection + * status stored in hardware. + */ +void flash_sync_real_protect(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + for (i = 0; i < info->sector_count; ++i) { + info->protect[i] = intel_sector_protected(info, i); + } + break; + default: + /* no h/w protect support */ + break; + } +} + +/* + * checks if "sector" in bank "info" is protected. Should work on intel + * strata flash chips 28FxxxJ3x in 8-bit mode. + * Returns 1 if sector is protected (or timed-out while trying to read + * protection status), 0 if it is not. + */ +uchar intel_sector_protected(flash_info_t * info, ushort sector) +{ + FPWV *addr; + FPWV *lock_conf_addr; + ulong start; + unsigned char ret; + + /* + * first, wait for the WSM to be finished. The rationale for + * waiting for the WSM to become idle for at most + * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy + * because of: (1) erase, (2) program or (3) lock bit + * configuration. So we just wait for the longest timeout of + * the (1)-(3), i.e. the erase timeout. + */ + + /* wait at least 35ns (W12) before issuing Read Status Register */ + /*udelay(1); */ + addr = (FPWV *) info->start[sector]; + *addr = (FPW) INTEL_STATUS; + + start = get_timer(0); + while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { + if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) { + *addr = (FPW) INTEL_RESET; /* restore read mode */ + printf("WSM busy too long, can't get prot status\n"); + return 1; + } + } + + /* issue the Read Identifier Codes command */ + *addr = (FPW) INTEL_READID; + + /* Intel example code uses offset of 4 for 8-bit flash */ + lock_conf_addr = (FPWV *) info->start[sector]; + ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0; + + /* put flash back in read mode */ + *addr = (FPW) INTEL_RESET; + + return ret; +} + +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type, start, last; + int rcode = 0, intel = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) + printf("- missing\n"); + else + printf("- no sectors to erase\n"); + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + + if (type != (FLASH_MAN_INTEL & FLASH_VENDMASK)) { + if (type != (FLASH_MAN_ATM & FLASH_VENDMASK)) { + type = (info->flash_id & FLASH_VENDMASK); + printf + ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + } + + if (type == FLASH_MAN_INTEL) + intel = 1; + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + else + printf("\n"); + + start = get_timer(0); + last = start; + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + + FPWV *addr = (FPWV *) (info->start[sect]); + int min = 0; + + printf("."); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + if (intel) { + *addr = (FPW) INTEL_READID; + min = addr[INTEL_CFI_TERB] & 0xff; + min = 1 << min; /* ms */ + min = (min / info->sector_count) * 1000; + + /* start erase block */ + *addr = (FPW) INTEL_CLEAR; /* clear status register */ + *addr = (FPW) INTEL_ERASE; /* erase setup */ + *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ + + while ((*addr & (FPW) INTEL_FINISHED) != + (FPW) INTEL_FINISHED) { + + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *addr = (FPW) INTEL_SUSERASE; /* suspend erase */ + *addr = (FPW) INTEL_RESET; /* reset to read mode */ + + rcode = 1; + break; + } + } + + *addr = (FPW) INTEL_RESET; /* resest to read mode */ + } else { + FPWV *base; /* first address in bank */ + FPWV *atmeladdr; + + flag = disable_interrupts(); + + atmeladdr = (FPWV *) addr; /* concatenate to 8 bit */ + base = (FPWV *) (CFG_ATMEL_BASE); /* First sector */ + + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + base[FLASH_CYCLE1] = (u8) 0x00800080; /* erase mode */ + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + *atmeladdr = (u8) 0x00300030; /* erase sector */ + + if (flag) + enable_interrupts(); + + while ((*atmeladdr & (u8) 0x00800080) != + (u8) 0x00800080) { + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ + + rcode = 1; + break; + } + } + + *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ + } /* Atmel or Intel */ + } + } + printf(" done\n"); + + return rcode; +} + +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + if (info->flash_id == FLASH_UNKNOWN) + return 4; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_ATM: + { + u16 data = 0; + int bytes; /* number of bytes to program in current word */ + int left; /* number of bytes left to program */ + int i, res; + + for (left = cnt, res = 0; + left > 0 && res == 0; + addr += sizeof(data), left -= + sizeof(data) - bytes) { + + bytes = addr & (sizeof(data) - 1); + addr &= ~(sizeof(data) - 1); + + /* combine source and destination data so can program + * an entire word of 16 or 32 bits + */ + for (i = 0; i < sizeof(data); i++) { + data <<= 8; + if (i < bytes || i - bytes >= left) + data += *((uchar *) addr + i); + else + data += *src++; + } + + data = (data >> 8) | (data << 8); + res = write_word_atm(info, (FPWV *) addr, data); + } + return res; + } /* case FLASH_MAN_ATM */ + + case FLASH_MAN_INTEL: + { + ulong cp, wp; + u16 data; + int count, i, l, rc, port_width; + + /* get lower word aligned address */ + wp = addr; + port_width = sizeof(FPW); + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + + for (; cnt == 0 && i < port_width; ++i, ++cp) + data = (data << 8) | (*(uchar *) cp); + + if ((rc = write_data(info, wp, data)) != 0) + return (rc); + + wp += port_width; + } + + if (cnt > WR_BLOCK) { + /* + * handle word aligned part + */ + count = 0; + while (cnt >= WR_BLOCK) { + + if ((rc = + write_data_block(info, + (ulong) src, + wp)) != 0) + return (rc); + + wp += WR_BLOCK; + src += WR_BLOCK; + cnt -= WR_BLOCK; + + if (count++ > 0x800) { + spin_wheel(); + count = 0; + } + } + } + + /* handle word aligned part */ + if (cnt < WR_BLOCK) { + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) + data = (data << 8) | *src++; + + if ((rc = + write_data(info, + (ulong) ((FPWV *) wp), + (FPW) (data))) != 0) + return (rc); + + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel(); + count = 0; + } + } + } + + if (cnt == 0) + return ERR_OK; + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; + ++i, ++cp) { + data = (data << 8) | (*src++); + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return write_data(info, (ulong) ((FPWV *) wp), + (FPW) data); + + } /* case FLASH_MAN_INTEL */ + + } /* switch */ + + return ERR_OK; +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_data_block(flash_info_t * info, ulong src, ulong dest) +{ + FPWV *srcaddr = (FPWV *) src; + FPWV *dstaddr = (FPWV *) dest; + ulong start; + int flag, i; + + /* Check if Flash is (sufficiently) erased */ + for (i = 0; i < WR_BLOCK; i++) + if ((*dstaddr++ & 0xff) != 0xff) { + printf("not erased at %08lx (%lx)\n", + (ulong) dstaddr, *dstaddr); + return (2); + } + + dstaddr = (FPWV *) dest; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + *dstaddr = (FPW) INTEL_WRBLK; /* write block setup */ + + if (flag) + enable_interrupts(); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + return (1); + } + } + + *dstaddr = (FPW) WR_BLOCK - 1; /* write 32 to buffer */ + for (i = 0; i < WR_BLOCK; i++) + *dstaddr++ = *srcaddr++; + + dstaddr -= 1; + *dstaddr = (FPW) INTEL_CONFIRM; /* write 32 to buffer */ + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + return (1); + } + } + + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + + return (0); +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_data(flash_info_t * info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + ulong start; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + printf("not erased at %08lx (%lx)\n", (ulong) addr, + (ulong) * addr); + return (2); + } + + /* Disable interrupts which might cause a timeout here */ + flag = (int)disable_interrupts(); + + *addr = (FPW) INTEL_CLEAR; + *addr = (FPW) INTEL_RESET; + + *addr = (FPW) INTEL_WRSETUP; /* write setup */ + *addr = data; + + if (flag) + enable_interrupts(); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) INTEL_SUSERASE; /* suspend mode */ + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* reset */ + return (1); + } + } + + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* restore read mode */ + + return (0); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash for ATMEL FLASH + * A word is 16 bits, whichever the bus width of the flash bank + * (not an individual chip) is. + * + * returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data) +{ + ulong start; + int flag, i; + int res = 0; /* result, assume success */ + FPWV *base; /* first address in flash bank */ + + /* Check if Flash is (sufficiently) erased */ + if ((*((volatile u16 *)dest) & data) != data) { + return (2); + } + + base = (FPWV *) (CFG_ATMEL_BASE); + + for (i = 0; i < sizeof(u16); i++) { + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + base[FLASH_CYCLE1] = (u8) 0x00A000A0; /* selects program mode */ + + *dest = data; /* start programming the data */ + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + start = get_timer(0); + + /* data polling for D7 */ + while (res == 0 + && (*dest & (u8) 0x00800080) != + (data & (u8) 0x00800080)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dest = (u8) 0x00F000F0; /* reset bank */ + res = 1; + } + } + + *dest++ = (u8) 0x00F000F0; /* reset bank */ + data >>= 8; + } + + return (res); +} + +void inline spin_wheel(void) +{ + static int p = 0; + static char w[] = "\\/-"; + + printf("\010%c", w[p]); + (++p == 3) ? (p = 0) : 0; +} + +#ifdef CFG_FLASH_PROTECTION +/*----------------------------------------------------------------------- + */ +int flash_real_protect(flash_info_t * info, long sector, int prot) +{ + int rcode = 0; /* assume success */ + FPWV *addr; /* address of sector */ + FPW value; + + addr = (FPWV *) (info->start[sector]); + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + *addr = (FPW) INTEL_RESET; /* make sure in read mode */ + *addr = (FPW) INTEL_LOCKBIT; /* lock command setup */ + + if (prot) + *addr = (FPW) INTEL_PROTECT; /* lock sector */ + else + *addr = (FPW) INTEL_CONFIRM; /* unlock sector */ + + /* now see if it really is locked/unlocked as requested */ + *addr = (FPW) INTEL_READID; + + /* read sector protection at sector address, (A7 .. A0) = 0x02. + * D0 = 1 for each device if protected. + * If at least one device is protected the sector is marked + * protected, but return failure. Mixed protected and + * unprotected devices within a sector should never happen. + */ + value = addr[2] & (FPW) INTEL_PROTECT; + if (value == 0) + info->protect[sector] = 0; + else if (value == (FPW) INTEL_PROTECT) + info->protect[sector] = 1; + else { + /* error, mixed protected and unprotected */ + rcode = 1; + info->protect[sector] = 1; + } + if (info->protect[sector] != prot) + rcode = 1; /* failed to protect/unprotect as requested */ + + /* reload all protection bits from hardware for now */ + flash_sync_real_protect(info); + break; + + default: + /* no hardware protect that we support */ + info->protect[sector] = prot; + break; + } + + return rcode; +} +#endif +#endif diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c new file mode 100644 index 0000000..1411a1a --- /dev/null +++ b/board/freescale/m54455evb/m54455evb.c @@ -0,0 +1,165 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M54455 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); + volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + u32 dramsize, i; + + dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + gpio->mscr_sdram = 0xAA; + + sdram->sdcs0 = (CFG_SDRAM_BASE | i); + sdram->sdcs1 = (CFG_SDRAM_BASE1 | i); + + sdram->sdcfg1 = CFG_SDRAM_CFG1; + sdram->sdcfg2 = CFG_SDRAM_CFG2; + + /* Issue PALL */ + sdram->sdcr = CFG_SDRAM_CTRL | 2; + + /* Issue LEMR */ + sdram->sdmr = CFG_SDRAM_EMOD | 0x408; + sdram->sdmr = CFG_SDRAM_MODE | 0x300; + + udelay(500); + + /* Issue PALL */ + sdram->sdcr = CFG_SDRAM_CTRL | 2; + + /* Perform two refresh cycles */ + sdram->sdcr = CFG_SDRAM_CTRL | 4; + sdram->sdcr = CFG_SDRAM_CTRL | 4; + + sdram->sdmr = CFG_SDRAM_MODE | 0x200; + + sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + + udelay(100); + + return (dramsize << 1); +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#if defined(CONFIG_CMD_IDE) +#include + +int ide_preinit(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_MASK) | 0x10; + gpio->par_feci2c |= + (gpio->par_feci2c & 0xF0FF) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR | + GPIO_PAR_FECI2C_MDIO1_ATA_DIOW); + gpio->par_ata |= + (GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 | + GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0 + | GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ | + GPIO_PAR_ATA_IORDY_IORDY); + gpio->par_pci |= + (GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ); + + return (0); +} + +void ide_set_reset(int idereset) +{ + volatile atac_t *ata = (atac_t *) MMAP_ATA; + long period; + /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ + int piotms[5][9] = { + {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ + {50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */ + {30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */ + {30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */ + {25, 70, 20, 10, 20, 5, 10, 0, 35} + }; /* PIO 4 */ + + if (idereset) { + ata->cr = 0; /* control reset */ + udelay(10000); + } else { +#define CALC_TIMING(t) (t + period - 1) / period + period = 1000000000 / gd->bus_clk; /* period in ns */ + + /*ata->ton = CALC_TIMING (180); */ + ata->t1 = CALC_TIMING(piotms[2][0]); + ata->t2w = CALC_TIMING(piotms[2][1]); + ata->t2r = CALC_TIMING(piotms[2][1]); + ata->ta = CALC_TIMING(piotms[2][8]); + ata->trd = CALC_TIMING(piotms[2][7]); + ata->t4 = CALC_TIMING(piotms[2][3]); + ata->t9 = CALC_TIMING(piotms[2][6]); + + ata->cr = 0x40; /* IORDY enable */ + udelay(200000); + ata->cr |= 0x01; /* IORDY enable */ + } +} +#endif + +#if defined(CONFIG_PCI) +/* + * Initialize PCI devices, report devices found. + */ +static struct pci_controller hose; +extern void pci_mcf5445x_init(struct pci_controller *hose); + +void pci_init_board(void) +{ + pci_mcf5445x_init(&hose); +} +#endif /* CONFIG_PCI */ + diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c new file mode 100644 index 0000000..c067183 --- /dev/null +++ b/board/freescale/m54455evb/mii.c @@ -0,0 +1,320 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + struct fec_info_s *info = (struct fec_info_s *)dev->priv; + + if (setclear) { + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); + + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO; + else + gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA; + } else { + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); + + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; + else + gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + struct eth_device *dev; + int i, miispd; + u16 rst = 0; + + dev = eth_get_dev(); + + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET); + for (i = 0; i < FEC_RESET_DELAY; ++i) { + udelay(500); + miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst); + if ((rst & PHY_BMCR_RESET) == 0) + break; + } + if (i == FEC_RESET_DELAY) + printf("Mii reset timeout %d\n", i); +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + strcpy(info->phy_name, + STR_ID_DP83848VV); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + printf(STR_ID_DP83848VV); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds new file mode 100644 index 0000000..bda68e4 --- /dev/null +++ b/board/freescale/m54455evb/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf5445x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 889cff8..7686080 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -208,24 +208,36 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } #elif defined(CONFIG_M68K) /* M68K */ +static void print_str(const char *, const char *); int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int i; bd_t *bd = gd->bd; + char buf[32]; + print_num ("memstart", (ulong)bd->bi_memstart); print_num ("memsize", (ulong)bd->bi_memsize); print_num ("flashstart", (ulong)bd->bi_flashstart); print_num ("flashsize", (ulong)bd->bi_flashsize); print_num ("flashoffset", (ulong)bd->bi_flashoffset); #if defined(CFG_INIT_RAM_ADDR) - print_num ("sramstart", (ulong)bd->bi_sramstart); - print_num ("sramsize", (ulong)bd->bi_sramsize); + print_num ("sramstart", (ulong)bd->bi_sramstart); + print_num ("sramsize", (ulong)bd->bi_sramsize); #endif #if defined(CFG_MBAR) - print_num ("mbar", bd->bi_mbar_base ); + print_num ("mbar", bd->bi_mbar_base); #endif -#if defined(CONFIG_CMD_NET) + print_str ("busfreq", strmhz(buf, bd->bi_busfreq)); +#ifdef CONFIG_PCI + print_str ("pcifreq", strmhz(buf, bd->bi_pcifreq)); +#endif +#ifdef CONFIG_EXTRA_CLOCK + print_str ("flbfreq", strmhz(buf, bd->bi_flbfreq)); + print_str ("inpfreq", strmhz(buf, bd->bi_inpfreq)); + print_str ("vcofreq", strmhz(buf, bd->bi_vcofreq)); +#endif +#if defined(CFG_CMD_NET) puts ("ethaddr ="); for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); @@ -323,7 +335,7 @@ static void print_num(const char *name, ulong value) printf ("%-12s= 0x%08lX\n", name, value); } -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) static void print_str(const char *name, const char *str) { printf ("%-12s= %6s MHz\n", name, str); diff --git a/cpu/mcf5445x/Makefile b/cpu/mcf5445x/Makefile new file mode 100644 index 0000000..26ec298 --- /dev/null +++ b/cpu/mcf5445x/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +# CFLAGS += -DET_DEBUG + +LIB = lib$(CPU).a + +START = start.o +COBJS = cpu.o speed.o cpu_init.o interrupts.o pci.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/mcf5445x/config.mk b/cpu/mcf5445x/config.mk new file mode 100644 index 0000000..d0c72fb --- /dev/null +++ b/cpu/mcf5445x/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2003 Josef Baumgartner +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -ffixed-d7 -msep-data +PLATFORM_CPPFLAGS += -m5407 -fPIC diff --git a/cpu/mcf5445x/cpu.c b/cpu/mcf5445x/cpu.c new file mode 100644 index 0000000..e601b89 --- /dev/null +++ b/cpu/mcf5445x/cpu.c @@ -0,0 +1,97 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + volatile rcm_t *rcm = (rcm_t *) (MMAP_RCM); + udelay(1000); + rcm->rcr |= RCM_RCR_SOFTRST; + + /* we don't return! */ + return 0; +}; + +int checkcpu(void) +{ + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; + u16 msk; + u16 id = 0; + u8 ver; + + puts("CPU: "); + msk = (ccm->cir >> 6); + ver = (ccm->cir & 0x003f); + switch (msk) { + case 0x48: + id = 54455; + break; + case 0x49: + id = 54454; + break; + case 0x4a: + id = 54453; + break; + case 0x4b: + id = 54452; + break; + case 0x4d: + id = 54451; + break; + case 0x4f: + id = 54450; + break; + } + + if (id) { + printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, + ver); + printf(" CPU CLK %d Mhz BUS CLK %d Mhz FLB CLK %d Mhz\n", + (int)(gd->cpu_clk / 1000000), + (int)(gd->bus_clk / 1000000), + (int)(gd->flb_clk / 1000000)); +#ifdef CONFIG_PCI + printf(" PCI CLK %d Mhz INP CLK %d Mhz VCO CLK %d Mhz\n", + (int)(gd->pci_clk / 1000000), + (int)(gd->inp_clk / 1000000), + (int)(gd->vco_clk / 1000000)); +#else + printf(" INP CLK %d Mhz VCO CLK %d Mhz\n", + (int)(gd->inp_clk / 1000000), + (int)(gd->vco_clk / 1000000)); +#endif + } + + return 0; +} diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c new file mode 100644 index 0000000..6622eee --- /dev/null +++ b/cpu/mcf5445x/cpu_init.c @@ -0,0 +1,140 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + + scm1->mpr = 0x77777777; + scm1->pacra = 0; + scm1->pacrb = 0; + scm1->pacrc = 0; + scm1->pacrd = 0; + scm1->pacre = 0; + scm1->pacrf = 0; + scm1->pacrg = 0; + + /* FlexBus */ + gpio->par_be = + GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | GPIO_PAR_BE_BE1_BE1 | + GPIO_PAR_BE_BE0_BE0; + gpio->par_fbctl = + GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | GPIO_PAR_FBCTL_RW_RW | + GPIO_PAR_FBCTL_TS_TS; + +#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL)) + fbcs->csar0 = CFG_CS0_BASE; + fbcs->cscr0 = CFG_CS0_CTRL; + fbcs->csmr0 = CFG_CS0_MASK; +#endif + +#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) + /* Latch chipselect */ + fbcs->csar1 = CFG_CS1_BASE; + fbcs->cscr1 = CFG_CS1_CTRL; + fbcs->csmr1 = CFG_CS1_MASK; +#endif + +#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) + fbcs->csar2 = CFG_CS2_BASE; + fbcs->cscr2 = CFG_CS2_CTRL; + fbcs->csmr2 = CFG_CS2_MASK; +#endif + +#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) + fbcs->csar3 = CFG_CS3_BASE; + fbcs->cscr3 = CFG_CS3_CTRL; + fbcs->csmr3 = CFG_CS3_MASK; +#endif + +#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) + fbcs->csar4 = CFG_CS4_BASE; + fbcs->cscr4 = CFG_CS4_CTRL; + fbcs->csmr4 = CFG_CS4_MASK; +#endif + +#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) + fbcs->csar5 = CFG_CS5_BASE; + fbcs->cscr5 = CFG_CS5_CTRL; + fbcs->csmr5 = CFG_CS5_MASK; +#endif + +#ifdef CONFIG_FSL_I2C + gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA; +#endif + + icache_enable(); +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ +#ifdef CONFIG_MCFTMR + volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE); + volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended; + u32 oscillator = CFG_RTC_OSCILLATOR; + + rtcex->gocu = (CFG_RTC_OSCILLATOR >> 16) & 0xFFFF; + rtcex->gocl = CFG_RTC_OSCILLATOR & 0xFFFF; +#endif + + return (0); +} + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = + (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); + break; + } +} diff --git a/cpu/mcf5445x/interrupts.c b/cpu/mcf5445x/interrupts.c new file mode 100644 index 0000000..9572a7b --- /dev/null +++ b/cpu/mcf5445x/interrupts.c @@ -0,0 +1,52 @@ +/* + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* CPU specific interrupt routine */ +#include +#include + +int interrupt_init(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + /* Make sure all interrupts are disabled */ + intp->imrh0 |= 0xFFFFFFFF; + intp->imrl0 |= 0xFFFFFFFF; + + enable_interrupts(); + return 0; +} + +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + intp->imrh0 &= ~CFG_TMRINTR_MASK; +} +#endif diff --git a/cpu/mcf5445x/pci.c b/cpu/mcf5445x/pci.c new file mode 100644 index 0000000..8ace536 --- /dev/null +++ b/cpu/mcf5445x/pci.c @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * PCI Configuration space access support + */ +#include +#include +#include +#include + +#if defined(CONFIG_PCI) +/* System RAM mapped over PCI */ +#define CFG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CFG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE +#define CFG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) + +#define cfg_read(val, addr, type, op) *val = op((type)(addr)); +#define cfg_write(val, addr, type, op) op((type *)(addr), (val)); + +#define PCI_OP(rw, size, type, op, mask) \ +int pci_##rw##_cfg_##size(struct pci_controller *hose, \ + pci_dev_t dev, int offset, type val) \ +{ \ + u32 addr = 0; \ + u16 cfg_type = 0; \ + addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \ + out_be32(hose->cfg_addr, addr); \ + __asm__ __volatile__("nop"); \ + cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ + out_be32(hose->cfg_addr, addr & 0x7fffffff); \ + __asm__ __volatile__("nop"); \ + return 0; \ +} + +PCI_OP(read, byte, u8 *, in_8, 3) +PCI_OP(read, word, u16 *, in_le16, 2) +PCI_OP(write, byte, u8, out_8, 3) +PCI_OP(write, word, u16, out_le16, 2) +PCI_OP(write, dword, u32, out_le32, 0) + +int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev, + int offset, u32 * val) +{ + u32 addr; + u32 tmpv; + u32 mask = 2; /* word access */ + /* Read lower 16 bits */ + addr = ((offset & 0xfc) | (dev) | 0x80000000); + out_be32(hose->cfg_addr, addr); + __asm__ __volatile__("nop"); + *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); + out_be32(hose->cfg_addr, addr & 0x7fffffff); + __asm__ __volatile__("nop"); + + /* Read upper 16 bits */ + offset += 2; + addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000); + out_be32(hose->cfg_addr, addr); + __asm__ __volatile__("nop"); + tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); + out_be32(hose->cfg_addr, addr & 0x7fffffff); + __asm__ __volatile__("nop"); + + /* combine results into dword value */ + *val = (tmpv << 16) | *val; + + return 0; +} + +void pci_mcf5445x_init(struct pci_controller *hose) +{ + volatile pci_t *pci = (volatile pci_t *)MMAP_PCI; + volatile pciarb_t *pciarb = (volatile pciarb_t *)MMAP_PCIARB; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + u32 barEn = 0; + + pciarb->acr = 0x001f001f; + + /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT, + PCIREQ2, PCIGNT2 */ + gpio->par_pci = + GPIO_PAR_PCI_GNT3_GNT3 | GPIO_PAR_PCI_GNT2 | GPIO_PAR_PCI_GNT1 | + GPIO_PAR_PCI_GNT0 | GPIO_PAR_PCI_REQ3_REQ3 | GPIO_PAR_PCI_REQ2 | + GPIO_PAR_PCI_REQ1 | GPIO_PAR_PCI_REQ0; + + pci->tcr1 |= PCI_TCR1_P; + + /* Initiator windows */ + pci->iw0btar = CFG_PCI_MEM_PHYS; + pci->iw1btar = CFG_PCI_IO_PHYS; + pci->iw2btar = CFG_PCI_CFG_PHYS; + + pci->iwcr = + PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO | + PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO; + + /* Enable bus master and mem access */ + pci->scr = PCI_SCR_MW | PCI_SCR_B | PCI_SCR_M; + + /* Cache line size and master latency */ + pci->cr1 = PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xFF); + pci->cr2 = 0; + +#ifdef CFG_PCI_BAR0 + pci->bar0 = PCI_BAR_BAR0(CFG_PCI_BAR0); + pci->tbatr0 = CFG_PCI_TBATR0 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B0E; +#endif +#ifdef CFG_PCI_BAR1 + pci->bar1 = PCI_BAR_BAR1(CFG_PCI_BAR1); + pci->tbatr1 = CFG_PCI_TBATR1 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B1E; +#endif +#ifdef CFG_PCI_BAR2 + pci->bar2 = PCI_BAR_BAR2(CFG_PCI_BAR2); + pci->tbatr2 = CFG_PCI_TBATR2 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B2E; +#endif +#ifdef CFG_PCI_BAR3 + pci->bar3 = PCI_BAR_BAR3(CFG_PCI_BAR3); + pci->tbatr3 = CFG_PCI_TBATR3 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B3E; +#endif +#ifdef CFG_PCI_BAR4 + pci->bar4 = PCI_BAR_BAR4(CFG_PCI_BAR4); + pci->tbatr4 = CFG_PCI_TBATR4 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B4E; +#endif +#ifdef CFG_PCI_BAR5 + pci->bar5 = PCI_BAR_BAR5(CFG_PCI_BAR5); + pci->tbatr5 = CFG_PCI_TBATR5 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B5E; +#endif + + pci->tcr2 = barEn; + + /* Deassert reset bit */ + pci->gscr &= ~PCI_GSCR_PR; + udelay(1000); + + /* Enable PCI bus master support */ + hose->first_busno = 0; + hose->last_busno = 0xff; + + pci_set_region(hose->regions + 0, CFG_PCI_MEM_BUS, CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, PCI_REGION_MEM); + + pci_set_region(hose->regions + 1, CFG_PCI_IO_BUS, CFG_PCI_IO_PHYS, + CFG_PCI_IO_SIZE, PCI_REGION_IO); + + pci_set_region(hose->regions + 2, CFG_PCI_SYS_MEM_BUS, + CFG_PCI_SYS_MEM_PHYS, CFG_PCI_SYS_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 3; + + hose->cfg_addr = &(pci->car); + hose->cfg_data = (volatile unsigned char *)CFG_PCI_CFG_BUS; + + pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word, + pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word, + pci_write_cfg_dword); + + /* Hose scan */ + pci_register_hose(hose); + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCI */ diff --git a/cpu/mcf5445x/speed.c b/cpu/mcf5445x/speed.c new file mode 100644 index 0000000..967becf --- /dev/null +++ b/cpu/mcf5445x/speed.c @@ -0,0 +1,186 @@ +/* + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Low Power Divider specifications + */ +#define CLOCK_LPD_MIN (1 << 0) /* Divider (decoded) */ +#define CLOCK_LPD_MAX (1 << 15) /* Divider (decoded) */ + +#define CLOCK_PLL_FVCO_MAX 540000000 +#define CLOCK_PLL_FVCO_MIN 300000000 + +#define CLOCK_PLL_FSYS_MAX 266666666 +#define CLOCK_PLL_FSYS_MIN 100000000 +#define MHZ 1000000 + +void clock_enter_limp(int lpdiv) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + int i, j; + + /* Check bounds of divider */ + if (lpdiv < CLOCK_LPD_MIN) + lpdiv = CLOCK_LPD_MIN; + if (lpdiv > CLOCK_LPD_MAX) + lpdiv = CLOCK_LPD_MAX; + + /* Round divider down to nearest power of two */ + for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ; + + /* Apply the divider to the system clock */ + ccm->cdr = (ccm->cdr & 0xF0FF) | CCM_CDR_LPDIV(i); + + /* Enable Limp Mode */ + ccm->misccr |= CCM_MISCCR_LIMP; +} + +/* + * brief Exit Limp mode + * warning The PLL should be set and locked prior to exiting Limp mode + */ +void clock_exit_limp(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; + + /* Exit Limp mode */ + ccm->misccr &= ~CCM_MISCCR_LIMP; + + /* Wait for the PLL to lock */ + while (!(pll->psr & PLL_PSR_LOCK)) ; +} + +/* + * get_clocks() fills in gd->cpu_clock and gd->bus_clk + */ +int get_clocks(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; + volatile u8 *cpld = (volatile u8 *)(CFG_CS2_BASE + 3); + volatile u8 *fpga = (volatile u8 *)(CFG_CS3_BASE + 14); + int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 }; + int pllmult_pci[] = { 12, 6, 16, 8 }; + int vco, bPci, temp, fbtemp, pcrvalue; + int *pPllmult = NULL; + u16 fbpll_mask; + u8 cpldmode; + + /* To determine PCI is present or not */ + if (((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x00e0) || + ((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) { + pPllmult = &pllmult_pci[0]; + fbpll_mask = 3; + bPci = 1; + } else { + pPllmult = &pllmult_nopci[0]; + fbpll_mask = 7; +#ifdef CONFIG_PCI + gd->pci_clk = 0; +#endif + bPci = 0; + } + +#ifdef CONFIG_M54455EVB + /* Temporary place here, belongs in board/freescale/... */ + /* Temporary read from CCR- fixed fb issue, must be the same clock + as pci or input clock, causing cpld/fpga read inconsistancy */ + fbtemp = pPllmult[ccm->ccr & fbpll_mask]; + + /* Break down into small pieces, code still in flex bus */ + pcrvalue = pll->pcr & 0xFFFFF0FF; + temp = fbtemp - 1; + pcrvalue |= PLL_PCR_OUTDIV3(temp); + + pll->pcr = pcrvalue; + + cpldmode = *cpld & 0x03; + if (cpldmode == 0) { + /* RCON mode */ + vco = pPllmult[ccm->rcon & fbpll_mask] * CFG_INPUT_CLKSRC; + + if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) { + /* invaild range, re-set in PCR */ + int temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; + int i, j, bus; + + j = (pll->pcr & 0xFF000000) >> 24; + for (i = j; i < 0xFF; i++) { + vco = i * CFG_INPUT_CLKSRC; + if (vco >= CLOCK_PLL_FVCO_MIN) { + bus = vco / temp; + if (bus <= CLOCK_PLL_FSYS_MIN - MHZ) + continue; + else + break; + } + } + pcrvalue = pll->pcr & 0x00FF00FF; + fbtemp = ((i - 1) << 8) | ((i - 1) << 12); + pcrvalue |= ((i << 24) | fbtemp); + + pll->pcr = pcrvalue; + } + gd->vco_clk = vco; /* Vco clock */ + } else if (cpldmode == 2) { + /* Normal mode */ + vco = pPllmult[ccm->ccr & fbpll_mask] * CFG_INPUT_CLKSRC; + gd->vco_clk = vco; /* Vco clock */ + } else if (cpldmode == 3) { + /* serial mode */ + } +#endif /* CONFIG_M54455EVB */ + + if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) { + /* Limp mode */ + } else { + gd->inp_clk = CFG_INPUT_CLKSRC; /* Input clock */ + + temp = (pll->pcr & PLL_PCR_OUTDIV1_MASK) + 1; + gd->cpu_clk = vco / temp; /* cpu clock */ + + temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; + gd->bus_clk = vco / temp; /* bus clock */ + + temp = ((pll->pcr & PLL_PCR_OUTDIV3_MASK) >> 8) + 1; + gd->flb_clk = vco / temp; /* FlexBus clock */ + +#ifdef CONFIG_PCI + if (bPci) { + temp = ((pll->pcr & PLL_PCR_OUTDIV4_MASK) >> 12) + 1; + gd->pci_clk = vco / temp; /* PCI clock */ + } +#endif + } + + return (0); +} diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S new file mode 100644 index 0000000..cd989ab --- /dev/null +++ b/cpu/mcf5445x/start.S @@ -0,0 +1,388 @@ +/* + * Copyright (C) 2003 Josef Baumgartner + * Based on code from Bernhard Kuhn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include "version.h" + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + +/* last three long word reserved for cache status */ +#define CACR_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-12) +#define ICACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 8) +#define DCACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 4) + +#define _START _start +#define _FAULT _fault + +#define SAVE_ALL \ + move.w #0x2700,%sr; /* disable intrs */ \ + subl #60,%sp; /* space for 15 regs */ \ + moveml %d0-%d7/%a0-%a6,%sp@; + +#define RESTORE_ALL \ + moveml %sp@,%d0-%d7/%a0-%a6; \ + addl #60,%sp; /* space for 15 regs */ \ + rte; + +.text +/* + * Vector table. This is used for initial platform startup. + * These vectors are to catch any un-intended traps. + */ +_vectors: + +INITSP: .long 0x00000000 /* Initial SP */ +INITPC: .long _START /* Initial PC */ +vector02: .long _FAULT /* Access Error */ +vector03: .long _FAULT /* Address Error */ +vector04: .long _FAULT /* Illegal Instruction */ +vector05: .long _FAULT /* Reserved */ +vector06: .long _FAULT /* Reserved */ +vector07: .long _FAULT /* Reserved */ +vector08: .long _FAULT /* Privilege Violation */ +vector09: .long _FAULT /* Trace */ +vector0A: .long _FAULT /* Unimplemented A-Line */ +vector0B: .long _FAULT /* Unimplemented F-Line */ +vector0C: .long _FAULT /* Debug Interrupt */ +vector0D: .long _FAULT /* Reserved */ +vector0E: .long _FAULT /* Format Error */ +vector0F: .long _FAULT /* Unitialized Int. */ + +/* Reserved */ +vector10_17: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector18: .long _FAULT /* Spurious Interrupt */ +vector19: .long _FAULT /* Autovector Level 1 */ +vector1A: .long _FAULT /* Autovector Level 2 */ +vector1B: .long _FAULT /* Autovector Level 3 */ +vector1C: .long _FAULT /* Autovector Level 4 */ +vector1D: .long _FAULT /* Autovector Level 5 */ +vector1E: .long _FAULT /* Autovector Level 6 */ +vector1F: .long _FAULT /* Autovector Level 7 */ + +/* TRAP #0 - #15 */ +vector20_2F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +/* Reserved */ +vector30_3F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector64_127: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector128_191: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector192_255: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + + .text + + .globl _start +_start: + nop + nop + move.w #0x2700,%sr /* Mask off Interrupt */ + + /* Set vector base register at the beginning of the Flash */ + move.l #CFG_FLASH_BASE, %d0 + movec %d0, %VBR + + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR0 + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CACR_STATUS), %a1 /* CACR */ + move.l #(ICACHE_STATUS), %a2 /* icache */ + move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + move.l %d0, (%a3) + + /* invalidate and disable cache */ + move.l #0x01004100, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + movec %d0, %ACR2 + movec %d0, %ACR3 + + /* set stackpointer to end of internal ram to get some stackspace for + the first c-code */ + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp + clr.l %sp@- + + move.l #__got_start, %a5 /* put relocation table address to a5 */ + + bsr cpu_init_f /* run low-level CPU init code (from flash) */ + bsr board_init_f /* run low-level board init code (from flash) */ + + /* board_init_f() does not return */ + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + link.w %a6,#0 + move.l 8(%a6), %sp /* set new stack pointer */ + + move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ + move.l 16(%a6), %a0 /* Save copy of Destination Address */ + + move.l #CFG_MONITOR_BASE, %a1 + move.l #__init_end, %a2 + move.l %a0, %a3 + + /* copy the code to RAM */ +1: + move.l (%a1)+, (%a3)+ + cmp.l %a1,%a2 + bgt.s 1b + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + move.l %a0, %a1 + add.l #(in_ram - CFG_MONITOR_BASE), %a1 + jmp (%a1) + +in_ram: + +clear_bss: + /* + * Now clear BSS segment + */ + move.l %a0, %a1 + add.l #(_sbss - CFG_MONITOR_BASE),%a1 + move.l %a0, %d1 + add.l #(_ebss - CFG_MONITOR_BASE),%d1 +6: + clr.l (%a1)+ + cmp.l %a1,%d1 + bgt.s 6b + + /* + * fix got table in RAM + */ + move.l %a0, %a1 + add.l #(__got_start - CFG_MONITOR_BASE),%a1 + move.l %a1,%a5 /* * fix got pointer register a5 */ + + move.l %a0, %a2 + add.l #(__got_end - CFG_MONITOR_BASE),%a2 + +7: + move.l (%a1),%d1 + sub.l #_start,%d1 + add.l %a0,%d1 + move.l %d1,(%a1)+ + cmp.l %a2, %a1 + bne 7b + + /* calculate relative jump to board_init_r in ram */ + move.l %a0, %a1 + add.l #(board_init_r - CFG_MONITOR_BASE), %a1 + + /* set parameters for board_init_r */ + move.l %a0,-(%sp) /* dest_addr */ + move.l %d0,-(%sp) /* gd */ + jsr (%a1) + +/*------------------------------------------------------------------------------*/ +/* exception code */ + .globl _fault +_fault: + jmp _fault + .globl _exc_handler + +_exc_handler: + SAVE_ALL + movel %sp,%sp@- + bsr exc_handler + addql #4,%sp + RESTORE_ALL + + .globl _int_handler +_int_handler: + SAVE_ALL + movel %sp,%sp@- + bsr int_handler + addql #4,%sp + RESTORE_ALL + +/*------------------------------------------------------------------------------*/ +/* cache functions */ + .globl icache_enable +icache_enable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d1 + + move.l #0x00040100, %d0 /* Invalidate icache */ + or.l %d1, %d0 + movec %d0, %CACR + + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup icache */ + movec %d0, %ACR2 + + or.l #0x00088400, %d1 /* Enable bcache and icache */ + movec %d1, %CACR + + move.l #(ICACHE_STATUS), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + .globl icache_disable +icache_disable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + and.l #0xFFF77BFF, %d0 + or.l #0x00040100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Invalidate icache */ + clr.l %d0 + movec %d0, %ACR2 + movec %d0, %ACR3 + + move.l #(ICACHE_STATUS), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl icache_status +icache_status: + move.l #(ICACHE_STATUS), %a1 + move.l (%a1), %d0 + rts + + .globl icache_invalid +icache_invalid: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + or.l #0x00040100, %d0 /* Invalidate icache */ + movec %d0, %CACR /* Enable and invalidate cache */ + rts + + .globl dcache_enable +dcache_enable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d1 + + move.l #0x01000000, %d0 + or.l %d1, %d0 + movec %d0, %CACR /* Invalidate dcache */ + + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 + movec %d0, %ACR0 + move.l #0, %d0 + movec %d0, %ACR1 + + or.l #0x80000000, %d1 /* Enable bcache and icache */ + movec %d1, %CACR + + move.l #(DCACHE_STATUS), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + .globl dcache_disable +dcache_disable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + and.l #0x7FFFFFFF, %d0 + or.l #0x01000000, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Disable dcache */ + clr.l %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + + move.l #(DCACHE_STATUS), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl dcache_invalid +dcache_invalid: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + or.l #0x01000000, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable and invalidate cache */ + rts + + .globl dcache_status +dcache_status: + move.l #(DCACHE_STATUS), %a1 + move.l (%a1), %d0 + rts + +/*------------------------------------------------------------------------------*/ + + .globl version_string +version_string: + .ascii U_BOOT_VERSION + .ascii " (", __DATE__, " - ", __TIME__, ")" + .ascii CONFIG_IDENT_STRING, "\0" diff --git a/doc/README.m54455evb b/doc/README.m54455evb new file mode 100644 index 0000000..c768fc8 --- /dev/null +++ b/doc/README.m54455evb @@ -0,0 +1,416 @@ +Freescale MCF54455EVB ColdFire Development Board +================================================ + +TsiChung Liew(Tsi-Chung.Liew@freescale.com) +Created 4/08/07 +=========================================== + + +Changed files: +============== + +- board/freescale/m54455evb/m54455evb.c Dram setup, IDE pre init, and PCI init +- board/freescale/m54455evb/flash.c Atmel and INTEL flash support +- board/freescale/m54455evb/Makefile Makefile +- board/freescale/m54455evb/config.mk config make +- board/freescale/m54455evb/u-boot.lds Linker description + +- common/cmd_bdinfo.c Clock frequencies output +- common/cmd_mii.c mii support + +- cpu/mcf5445x/cpu.c cpu specific code +- cpu/mcf5445x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs +- cpu/mcf5445x/interrupts.c cpu specific interrupt support +- cpu/mcf5445x/speed.c system, pci, flexbus, and cpu clock +- cpu/mcf5445x/Makefile Makefile +- cpu/mcf5445x/config.mk config make +- cpu/mcf5445x/start.S start up assembly code + +- doc/README.m54455evb This readme file + +- drivers/net/mcffec.c ColdFire common FEC driver +- drivers/serial/mcfuart.c ColdFire common UART driver + +- include/asm-m68k/bitops.h Bit operation function export +- include/asm-m68k/byteorder.h Byte order functions +- include/asm-m68k/fec.h FEC structure and definition +- include/asm-m68k/fsl_i2c.h I2C structure and definition +- include/asm-m68k/global_data.h Global data structure +- include/asm-m68k/immap.h ColdFire specific header file and driver macros +- include/asm-m68k/immap_5445x.h mcf5445x specific header file +- include/asm-m68k/io.h io functions +- include/asm-m68k/m5445x.h mcf5445x specific header file +- include/asm-m68k/posix_types.h Posix +- include/asm-m68k/processor.h header file +- include/asm-m68k/ptrace.h Exception structure +- include/asm-m68k/rtc.h Realtime clock header file +- include/asm-m68k/string.h String function export +- include/asm-m68k/timer.h Timer structure and definition +- include/asm-m68k/types.h Data types definition +- include/asm-m68k/uart.h Uart structure and definition +- include/asm-m68k/u-boot.h u-boot structure + +- include/configs/M54455EVB.h Board specific configuration file + +- lib_m68k/board.c board init function +- lib_m68k/cache.c +- lib_m68k/interrupts Coldfire common interrupt functions +- lib_m68k/m68k_linux.c +- lib_m68k/time.c Timer functions (Dma timer and PIT) +- lib_m68k/traps.c Exception init code + +- rtc/mcfrtc.c Realtime clock Driver + +1 MCF5445x specific Options/Settings +==================================== +1.1 pre-loader is no longer suppoer in thie coldfire family + +1.2 Configuration settings for M54455EVB Development Board +CONFIG_MCF5445x -- define for all MCF5445x CPUs +CONFIG_M54455 -- define for all Freescale MCF54455 CPUs +CONFIG_M54455EVB -- define for M54455EVB board + +CONFIG_MCFUART -- define to use common CF Uart driver +CFG_UART_PORT -- define UART port number, start with 0, 1 and 2 +CONFIG_BAUDRATE -- define UART baudrate + +CONFIG_MCFRTC -- define to use common CF RTC driver +CFG_MCFRTC_BASE -- provide base address for RTC in immap.h +CFG_RTC_OSCILLATOR -- define RTC clock frequency +RTC_DEBUG -- define to show RTC debug message +CFG_CMD_DATE -- enable to use date feature in u-boot + +CONFIG_MCFFEC -- define to use common CF FEC driver +CONFIG_NET_MULTI -- define to use multi FEC in u-boot +CONFIG_MII -- enable to use MII driver +CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c +CFG_DISCOVER_PHY -- enable PHY discovery +CFG_RX_ETH_BUFFER -- Set FEC Receive buffer +CFG_FAULT_ECHO_LINK_DOWN-- +CFG_FEC0_PINMUX -- Set FEC0 Pin configuration +CFG_FEC1_PINMUX -- Set FEC1 Pin configuration +CFG_FEC0_MIIBASE -- Set FEC0 MII base register +CFG_FEC1_MIIBASE -- Set FEC0 MII base register +MCFFEC_TOUT_LOOP -- set FEC timeout loop +CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot + +CONFIG_ISO_PARTITION -- enable ISO read/write +CONFIG_DOS_PARTITION -- enable DOS read/write +CONFIG_IDE_RESET -- define ide_reset() +CONFIG_IDE_PREINIT -- define ide_preinit() +CONFIG_ATAPI -- define ATAPI support +CONFIG_LBA48 -- define LBA48 (larger than 120GB) support +CFG_IDE_MAXBUS -- define max channel +CFG_IDE_MAXDEVICE -- define max devices per channel +CFG_ATA_BASE_ADDR -- define ATA base address +CFG_ATA_IDE0_OFFSET -- define ATA IDE0 offset +CFG_ATA_DATA_OFFSET -- define ATA data IO +CFG_ATA_REG_OFFSET -- define for normal register accesses +CFG_ATA_ALT_OFFSET -- define for alternate registers +CFG_ATA_STRIDE -- define for Interval between registers +_IO_BASE -- define for IO base address + +CONFIG_MCFTMR -- define to use DMA timer +CONFIG_MCFPIT -- define to use PIT timer + +CONFIG_FSL_I2C -- define to use FSL common I2C driver +CONFIG_HARD_I2C -- define for I2C hardware support +CONFIG_SOFT_I2C -- define for I2C bit-banged +CFG_I2C_SPEED -- define for I2C speed +CFG_I2C_SLAVE -- define for I2C slave address +CFG_I2C_OFFSET -- define for I2C base address offset +CFG_IMMR -- define for MBAR offset + +CONFIG_PCI -- define for PCI support +CONFIG_PCI_PNP -- define for Plug n play support +CFG_PCI_MEM_BUS -- PCI memory logical offset +CFG_PCI_MEM_PHYS -- PCI memory physical offset +CFG_PCI_MEM_SIZE -- PCI memory size +CFG_PCI_IO_BUS -- PCI IO logical offset +CFG_PCI_IO_PHYS -- PCI IO physical offset +CFG_PCI_IO_SIZE -- PCI IO size +CFG_PCI_CFG_BUS -- PCI Configuration logical offset +CFG_PCI_CFG_PHYS -- PCI Configuration physical offset +CFG_PCI_CFG_SIZE -- PCI Configuration size + +CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc + +CFG_MBAR -- define MBAR offset + +CFG_ATMEL_BOOT -- To determine the u-boot is booted from Atmel or Intel + +CONFIG_MONITOR_IS_IN_RAM -- Not support + +CFG_INIT_RAM_ADDR -- defines the base address of the MCF54455 internal SRAM + +CFG_CSn_BASE -- defines the Chip Select Base register +CFG_CSn_MASK -- defines the Chip Select Mask register +CFG_CSn_CTRL -- defines the Chip Select Control register + +CFG_ATMEL_BASE -- defines the Atmel Flash base +CFG_INTEL_BASE -- defines the Intel Flash base + +CFG_SDRAM_BASE -- defines the DRAM Base +CFG_SDRAM_BASE1 -- defines the DRAM Base 1 + +2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL +=========================================== +2.1. System memory map: + Flash: 0x00000000-0x3FFFFFFF (1024MB) + DDR: 0x40000000-0x7FFFFFFF (1024MB) + SRAM: 0x80000000-0x8FFFFFFF (256MB) + ATA: 0x90000000-0x9FFFFFFF (256MB) + PCI: 0xA0000000-0xBFFFFFFF (512MB) + FlexBus: 0xC0000000-0xDFFFFFFF (512MB) + IP: 0xF0000000-0xFFFFFFFF (256MB) + +2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and + linux kernel, you can customize it based on your system requirements: + Atmel boot: + Flash0: 0x00000000-0x0007FFFF (512KB) + Flash1: 0x04000000-0x05FFFFFF (32MB) + Intel boot: + Flash0: 0x00000000-0x01FFFFFF (32MB) + Flash1: 0x04000000-0x0407FFFF (512KB) + + CPLD: 0x08000000-0x08FFFFFF (16MB) + FPGA: 0x09000000-0x09FFFFFF (16MB) + DDR: 0x40000000-0x4FFFFFFF (256MB) + SRAM: 0x80000000-0x80007FFF (32KB) + IP: 0xFC000000-0xFC0FFFFF (64KB) + +3. SWITCH SETTINGS +================== +3.1 SW1 Pin3: 0 - Boot from Atmel or 1 - INTEL + SW1 Pin4: 0 - ULPI chip not in reset state or 1 - ULPI chip in reset state + SW1 Pin5: 0 - Full ATA Bus enabled, FEC Phy1 powered down + 1 - Upper 8 bits ATA data bus disabled, FEC PHY1 active + SW1 Pin6: 0 - FEC Phy0 active or 1 - FEC Phy0 powered down + SW1 Pin3: 0 - Boot from Atmel or 1 - INTEL + +4. COMPILATION +============== +4.1 To create U-Boot the gcc-4.1-32 compiler set (ColdFire ELF version) +from codesourcery.com was used. Download it from: +http://www.codesourcery.com/gnu_toolchains/coldfire/download.html + +4.2 Compilation + export CROSS_COMPILE=cross-compile-prefix + cd u-boot-1.x.x + make distclean + make M54455EVB_config, or - default to atmel 33Mhz input clock + make M54455EVB_atmel_config, or - default to atmel 33Mhz input clock + make M54455EVB_a33_config, or - default to atmel 33Mhz input clock + make M54455EVB_a66_config, or - default to atmel 66Mhz input clock + make M54455EVB_intel_config, or - default to intel 33Mhz input clock + make M54455EVB_i33_config, or - default to intel 33Mhz input clock + make M54455EVB_i66_config, or - default to intel 66Mhz input clock + make + +5. SCREEN DUMP +============== +5.1 M54455EVB Development board + Boot from Atmel (NOTE: May not show exactly the same) + +U-Boot 1.2.0-g98c80b46-dirty (Jul 26 2007 - 12:44:08) + +CPU: Freescale MCF54455 (Mask:48 Version:1) + CPU CLK 266 Mhz BUS CLK 133 Mhz FLB CLK 66 Mhz + PCI CLK 33 Mhz INP CLK 33 Mhz VCO CLK 533 Mhz +Board: Freescale M54455 EVB +I2C: ready +DRAM: 256 MB +FLASH: 16.5 MB +In: serial +Out: serial +Err: serial +Net: FEC0, FEC1 +IDE: Bus 0: not available +-> print +bootargs=root=/dev/ram rw +bootdelay=1 +baudrate=115200 +ethaddr=00:e0:0c:bc:e5:60 +eth1addr=00:e0:0c:bc:e5:61 +hostname=M54455EVB +netdev=eth0 +inpclk=33333333 +loadaddr=40010000 +load=tftp ${loadaddr) ${u-boot} +upd=run load; run prog +prog=prot off 0 2ffff;era 0 2ffff;cp.b ${loadaddr} 0 ${filesize};save +ethact=FEC0 +mtdids=nor0=M54455EVB-1 +mtdparts=M54455EVB-1:16m(user) +u-boot=u-boot54455.bin +filesize=292b4 +fileaddr=40010000 +gatewayip=192.168.1.1 +netmask=255.255.255.0 +ipaddr=192.168.1.3 +serverip=192.168.1.2 +stdin=serial +stdout=serial +stderr=serial +mem=261632k + +Environment size: 563/8188 bytes +-> bdinfo +memstart = 0x40000000 +memsize = 0x10000000 +flashstart = 0x00000000 +flashsize = 0x01080000 +flashoffset = 0x00000000 +sramstart = 0x80000000 +sramsize = 0x00008000 +mbar = 0xFC000000 +busfreq = 133.333 MHz +pcifreq = 33.333 MHz +flbfreq = 66.666 MHz +inpfreq = 33.333 MHz +vcofreq = 533.333 MHz +ethaddr = 00:E0:0C:BC:E5:60 +eth1addr = 00:E0:0C:BC:E5:61 +ip_addr = 192.168.1.3 +baudrate = 115200 bps +-> +-> help +? - alias for 'help' +autoscr - run script from memory +base - print or set address offset +bdinfo - print Board Info structure +boot - boot default, i.e., run 'bootcmd' +bootd - boot default, i.e., run 'bootcmd' +bootelf - Boot from an ELF image in memory +bootm - boot application image from memory +bootp - boot image via network using BootP/TFTP protocol +bootvx - Boot vxWorks from an ELF image +cmp - memory compare +coninfo - print console devices and information +cp - memory copy +crc32 - checksum calculation +date - get/set/reset date & time +dcache - enable or disable data cache +diskboot- boot from IDE device +echo - echo args to console +erase - erase FLASH memory +ext2load- load binary file from a Ext2 filesystem +ext2ls - list files in a directory (default /) +fatinfo - print information about filesystem +fatload - load binary file from a dos filesystem +fatls - list files in a directory (default /) +flinfo - print FLASH memory information +fsinfo - print information about filesystems +fsload - load binary file from a filesystem image +go - start application at address 'addr' +help - print online help +icache - enable or disable instruction cache +icrc32 - checksum calculation +ide - IDE sub-system +iloop - infinite loop on address range +imd - i2c memory display +iminfo - print header information for application image +imls - list all images found in flash +imm - i2c memory modify (auto-incrementing) +imw - memory write (fill) +inm - memory modify (constant address) +iprobe - probe to discover valid I2C chip addresses +itest - return true/false on integer compare +loadb - load binary file over serial line (kermit mode) +loads - load S-Record file over serial line +loady - load binary file over serial line (ymodem mode) +loop - infinite loop on address range +ls - list files in a directory (default /) +md - memory display +mii - MII utility commands +mm - memory modify (auto-incrementing) +mtest - simple RAM test +mw - memory write (fill) +nfs - boot image via network using NFS protocol +nm - memory modify (constant address) +pci - list and access PCI Configuration Space +ping - send ICMP ECHO_REQUEST to network host +printenv- print environment variables +protect - enable or disable FLASH write protection +rarpboot- boot image via network using RARP/TFTP protocol +reset - Perform RESET of the CPU +run - run commands in an environment variable +saveenv - save environment variables to persistent storage +setenv - set environment variables +sleep - delay execution for some time +tftpboot- boot image via network using TFTP protocol +version - print monitor version +->bootm 4000000 + +## Booting image at 04000000 ... + Image Name: Linux Kernel Image + Created: 2007-08-14 15:13:00 UTC + Image Type: M68K Linux Kernel Image (uncompressed) + Data Size: 2301952 Bytes = 2.2 MB + Load Address: 40020000 + Entry Point: 40020000 + Verifying Checksum ... OK +OK +Linux version 2.6.20-gfe5136d6-dirty (mattw@kea) (gcc version 4.2.0 20070318 (pr +erelease) (Sourcery G++ Lite 4.2-20)) #108 Mon Aug 13 13:00:13 MDT 2007 +starting up linux startmem 0xc0254000, endmem 0xcfffffff, size 253MB +Built 1 zonelists. Total pages: 32624 +Kernel command line: root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=ph +ysmap-flash.0:5M(kernel)ro,-(jffs2) +PID hash table entries: 1024 (order: 10, 4096 bytes) +Console: colour dummy device 80x25 +Dentry cache hash table entries: 32768 (order: 4, 131072 bytes) +Inode-cache hash table entries: 16384 (order: 3, 65536 bytes) +Memory: 257496k/262136k available (1864k kernel code, 2440k data, 88k init) +Mount-cache hash table entries: 1024 +NET: Registered protocol family 16 +SCSI subsystem initialized +NET: Registered protocol family 2 +IP route cache hash table entries: 2048 (order: 0, 8192 bytes) +TCP established hash table entries: 8192 (order: 2, 32768 bytes) +TCP bind hash table entries: 4096 (order: 1, 16384 bytes) +TCP: Hash tables configured (established 8192 bind 4096) +TCP reno registered +JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. +io scheduler noop registered +io scheduler anticipatory registered +io scheduler deadline registered +io scheduler cfq registered (default) +ColdFire internal UART serial driver version 1.00 +ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART +ttyS1 at 0xfc064000 (irq = 91) is a builtin ColdFire UART +ttyS2 at 0xfc068000 (irq = 92) is a builtin ColdFire UART +RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize +loop: loaded (max 8 devices) +FEC ENET Version 0.2 +fec: PHY @ 0x0, ID 0x20005ca2 -- DP83849 +eth0: ethernet 00:08:ee:00:e4:19 +physmap platform flash device: 01000000 at 04000000 +physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank + Intel/Sharp Extended Query Table at 0x0031 +Using buffer write method +cfi_cmdset_0001: Erase suspend on write enabled +2 cmdlinepart partitions found on MTD device physmap-flash.0 +Creating 2 MTD partitions on "physmap-flash.0": +0x00000000-0x00500000 : "kernel" +mtd: Giving out device 0 to kernel +0x00500000-0x01000000 : "jffs2" +mtd: Giving out device 1 to jffs2 +mice: PS/2 mouse device common for all mice +i2c /dev entries driver +TCP cubic registered +NET: Registered protocol family 1 +NET: Registered protocol family 17 +NET: Registered protocol family 15 +VFS: Mounted root (jffs2 filesystem). +Setting the hostname to freescale +Mounting filesystems +mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory +Starting syslogd and klogd +Setting up networking on loopback device: +Setting up networking on eth0: +eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. +Adding static route for default gateway to 172.27.255.254: +Setting nameserver to 172.27.0.1 in /etc/resolv.conf: +Starting inetd: +/ # diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 68a0ee6..2e0ddeb 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -430,20 +430,33 @@ int fec_init(struct eth_device *dev, bd_t * bd) /* Set station address */ if ((u32) fecp == CFG_FEC0_IOBASE) { +#ifdef CFG_FEC1_IOBASE + volatile fec_t *fecp1 = (fec_t *) (CFG_FEC1_IOBASE); + ea = &bd->bi_enet1addr[0]; + fecp1->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp1->paur = (ea[4] << 24) | (ea[5] << 16); +#endif ea = &bd->bi_enetaddr[0]; + fecp->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); } else { +#ifdef CFG_FEC0_IOBASE + volatile fec_t *fecp0 = (fec_t *) (CFG_FEC0_IOBASE); + ea = &bd->bi_enetaddr[0]; + fecp0->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp0->paur = (ea[4] << 24) | (ea[5] << 16); +#endif #ifdef CFG_FEC1_IOBASE ea = &bd->bi_enet1addr[0]; + fecp->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); #endif } - fecp->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); - fecp->paur = (ea[4] << 24) | (ea[5] << 16); -#ifdef ET_DEBUG - printf("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n", - ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]); -#endif - /* Clear unicast address hash table */ fecp->iaur = 0; fecp->ialr = 0; diff --git a/include/asm-m68k/global_data.h b/include/asm-m68k/global_data.h index f68352f..9d9894b 100644 --- a/include/asm-m68k/global_data.h +++ b/include/asm-m68k/global_data.h @@ -39,6 +39,14 @@ typedef struct global_data { unsigned long baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long bus_clk; +#ifdef CONFIG_PCI + unsigned long pci_clk; +#endif +#ifdef CONFIG_EXTRA_CLOCK + unsigned long inp_clk; + unsigned long vco_clk; + unsigned long flb_clk; +#endif unsigned long ram_size; /* RAM size */ unsigned long reloc_off; /* Relocation Offset */ unsigned long reset_status; /* reset status register at boot */ diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index bf7b51b..d66c161 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -170,4 +170,44 @@ #define CFG_NUM_IRQS (128) #endif /* CONFIG_M5329 */ +#ifdef CONFIG_M54455 +#include +#include + +#define CFG_FEC0_IOBASE (MMAP_FEC0) +#define CFG_FEC1_IOBASE (MMAP_FEC1) + +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x4000)) + +#define CFG_MCFRTC_BASE (MMAP_RTC) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprh0) +#define CFG_TMRINTR_NO (INT0_HI_DTMR1) +#define CFG_TMRINTR_MASK (INTC_IPRH_INT33) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (6) +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CFG_UDELAY_BASE (MMAP_PIT0) +#define CFG_PIT_BASE (MMAP_PIT1) +#define CFG_PIT_PRESCALE (6) +#endif + +#define CFG_INTR_BASE (MMAP_INTC0) +#define CFG_NUM_IRQS (128) + +#ifdef CONFIG_PCI +#define CFG_PCI_BAR0 CFG_SDRAM_BASE +#define CFG_PCI_BAR4 CFG_SDRAM_BASE +#define CFG_PCI_TBATR0 (CFG_SDRAM_BASE) +#define CFG_PCI_TBATR4 (CFG_SDRAM_BASE) +#endif +#endif /* CONFIG_M54455 */ + #endif /* __IMMAP_H */ diff --git a/include/asm-m68k/immap_5445x.h b/include/asm-m68k/immap_5445x.h new file mode 100644 index 0000000..d091d7b --- /dev/null +++ b/include/asm-m68k/immap_5445x.h @@ -0,0 +1,937 @@ +/* + * MCF5445x Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5445X__ +#define __IMMAP_5445X__ + +/* Module Base Addresses */ +#define MMAP_SCM1 0xFC000000 +#define MMAP_XBS 0xFC004000 +#define MMAP_FBCS 0xFC008000 +#define MMAP_FEC0 0xFC030000 +#define MMAP_FEC1 0xFC034000 +#define MMAP_RTC 0xFC03C000 +#define MMAP_EDMA 0xFC044000 +#define MMAP_INTC0 0xFC048000 +#define MMAP_INTC1 0xFC04C000 +#define MMAP_IACK 0xFC054000 +#define MMAP_I2C 0xFC058000 +#define MMAP_DSPI 0xFC05C000 +#define MMAP_UART0 0xFC060000 +#define MMAP_UART1 0xFC064000 +#define MMAP_UART2 0xFC068000 +#define MMAP_DTMR0 0xFC070000 +#define MMAP_DTMR1 0xFC074000 +#define MMAP_DTMR2 0xFC078000 +#define MMAP_DTMR3 0xFC07C000 +#define MMAP_PIT0 0xFC080000 +#define MMAP_PIT1 0xFC084000 +#define MMAP_PIT2 0xFC088000 +#define MMAP_PIT3 0xFC08C000 +#define MMAP_EPORT 0xFC094000 +#define MMAP_WTM 0xFC098000 +#define MMAP_SBF 0xFC0A0000 +#define MMAP_RCM 0xFC0A0000 +#define MMAP_CCM 0xFC0A0000 +#define MMAP_GPIO 0xFC0A4000 +#define MMAP_PCI 0xFC0A8000 +#define MMAP_PCIARB 0xFC0AC000 +#define MMAP_RNG 0xFC0B4000 +#define MMAP_SDRAM 0xFC0B8000 +#define MMAP_SSI 0xFC0BC000 +#define MMAP_PLL 0xFC0C4000 +#define MMAP_ATA 0x90000000 + +/********************************************************************* +* ATA +*********************************************************************/ + +typedef struct atac { + /* PIO */ + u8 toff; /* 0x00 */ + u8 ton; /* 0x01 */ + u8 t1; /* 0x02 */ + u8 t2w; /* 0x03 */ + u8 t2r; /* 0x04 */ + u8 ta; /* 0x05 */ + u8 trd; /* 0x06 */ + u8 t4; /* 0x07 */ + u8 t9; /* 0x08 */ + + /* DMA */ + u8 tm; /* 0x09 */ + u8 tn; /* 0x0A */ + u8 td; /* 0x0B */ + u8 tk; /* 0x0C */ + u8 tack; /* 0x0D */ + u8 tenv; /* 0x0E */ + u8 trp; /* 0x0F */ + u8 tzah; /* 0x10 */ + u8 tmli; /* 0x11 */ + u8 tdvh; /* 0x12 */ + u8 tdzfs; /* 0x13 */ + u8 tdvs; /* 0x14 */ + u8 tcvh; /* 0x15 */ + u8 tss; /* 0x16 */ + u8 tcyc; /* 0x17 */ + + /* FIFO */ + u32 fifo32; /* 0x18 */ + u16 fifo16; /* 0x1C */ + u8 rsvd0[2]; + u8 ffill; /* 0x20 */ + u8 rsvd1[3]; + + /* ATA */ + u8 cr; /* 0x24 */ + u8 rsvd2[3]; + u8 isr; /* 0x28 */ + u8 rsvd3[3]; + u8 ier; /* 0x2C */ + u8 rsvd4[3]; + u8 icr; /* 0x30 */ + u8 rsvd5[3]; + u8 falarm; /* 0x34 */ + u8 rsvd6[106]; +} atac_t; + +/********************************************************************* +* Cross-bar switch (XBS) +*********************************************************************/ + +typedef struct xbs { + u8 resv0[0x100]; + u32 prs1; /* XBS Priority Register */ + u8 resv1[0xC]; + u32 crs1; /* XBS Control Register */ + u8 resv2[0xEC]; + u32 prs2; /* XBS Priority Register */ + u8 resv3[0xC]; + u32 crs2; /* XBS Control Register */ + u8 resv4[0xEC]; + u32 prs3; /* XBS Priority Register */ + u8 resv5[0xC]; + u32 crs3; /* XBS Control Register */ + u8 resv6[0xEC]; + u32 prs4; /* XBS Priority Register */ + u8 resv7[0xC]; + u32 crs4; /* XBS Control Register */ + u8 resv8[0xEC]; + u32 prs5; /* XBS Priority Register */ + u8 resv9[0xC]; + u32 crs5; /* XBS Control Register */ + u8 resv10[0xEC]; + u32 prs6; /* XBS Priority Register */ + u8 resv11[0xC]; + u32 crs6; /* XBS Control Register */ + u8 resv12[0xEC]; + u32 prs7; /* XBS Priority Register */ + u8 resv13[0xC]; + u32 crs7; /* XBS Control Register */ +} xbs_t; + +/********************************************************************* +* FlexBus Chip Selects (FBCS) +*********************************************************************/ + +typedef struct fbcs { + u32 csar0; /* Chip-select Address Register */ + u32 csmr0; /* Chip-select Mask Register */ + u32 cscr0; /* Chip-select Control Register */ + u32 csar1; /* Chip-select Address Register */ + u32 csmr1; /* Chip-select Mask Register */ + u32 cscr1; /* Chip-select Control Register */ + u32 csar2; /* Chip-select Address Register */ + u32 csmr2; /* Chip-select Mask Register */ + u32 cscr2; /* Chip-select Control Register */ + u32 csar3; /* Chip-select Address Register */ + u32 csmr3; /* Chip-select Mask Register */ + u32 cscr3; /* Chip-select Control Register */ +} fbcs_t; + +/********************************************************************* +* Enhanced DMA (EDMA) +*********************************************************************/ + +typedef struct edma { + u32 cr; + u32 es; + u8 resv0[0x6]; + u16 erq; + u8 resv1[0x6]; + u16 eei; + u8 serq; + u8 cerq; + u8 seei; + u8 ceei; + u8 cint; + u8 cerr; + u8 ssrt; + u8 cdne; + u8 resv2[0x6]; + u16 intr; + u8 resv3[0x6]; + u16 err; + u8 resv4[0xD0]; + u8 dchpri0; + u8 dchpri1; + u8 dchpri2; + u8 dchpri3; + u8 dchpri4; + u8 dchpri5; + u8 dchpri6; + u8 dchpri7; + u8 dchpri8; + u8 dchpri9; + u8 dchpri10; + u8 dchpri11; + u8 dchpri12; + u8 dchpri13; + u8 dchpri14; + u8 dchpri15; + u8 resv5[0xEF0]; + u32 tcd0_saddr; + u16 tcd0_attr; + u16 tcd0_soff; + u32 tcd0_nbytes; + u32 tcd0_slast; + u32 tcd0_daddr; + union { + u16 tcd0_citer_elink; + u16 tcd0_citer; + }; + u16 tcd0_doff; + u32 tcd0_dlast_sga; + union { + u16 tcd0_biter_elink; + u16 tcd0_biter; + }; + u16 tcd0_csr; + u32 tcd1_saddr; + u16 tcd1_attr; + u16 tcd1_soff; + u32 tcd1_nbytes; + u32 tcd1_slast; + u32 tcd1_daddr; + union { + u16 tcd1_citer_elink; + u16 tcd1_citer; + }; + u16 tcd1_doff; + u32 tcd1_dlast_sga; + union { + u16 tcd1_biter; + u16 tcd1_biter_elink; + }; + u16 tcd1_csr; + u32 tcd2_saddr; + u16 tcd2_attr; + u16 tcd2_soff; + u32 tcd2_nbytes; + u32 tcd2_slast; + u32 tcd2_daddr; + union { + u16 tcd2_citer; + u16 tcd2_citer_elink; + }; + u16 tcd2_doff; + u32 tcd2_dlast_sga; + union { + u16 tcd2_biter_elink; + u16 tcd2_biter; + }; + u16 tcd2_csr; + u32 tcd3_saddr; + u16 tcd3_attr; + u16 tcd3_soff; + u32 tcd3_nbytes; + u32 tcd3_slast; + u32 tcd3_daddr; + union { + u16 tcd3_citer; + u16 tcd3_citer_elink; + }; + u16 tcd3_doff; + u32 tcd3_dlast_sga; + union { + u16 tcd3_biter_elink; + u16 tcd3_biter; + }; + u16 tcd3_csr; + u32 tcd4_saddr; + u16 tcd4_attr; + u16 tcd4_soff; + u32 tcd4_nbytes; + u32 tcd4_slast; + u32 tcd4_daddr; + union { + u16 tcd4_citer; + u16 tcd4_citer_elink; + }; + u16 tcd4_doff; + u32 tcd4_dlast_sga; + union { + u16 tcd4_biter; + u16 tcd4_biter_elink; + }; + u16 tcd4_csr; + u32 tcd5_saddr; + u16 tcd5_attr; + u16 tcd5_soff; + u32 tcd5_nbytes; + u32 tcd5_slast; + u32 tcd5_daddr; + union { + u16 tcd5_citer; + u16 tcd5_citer_elink; + }; + u16 tcd5_doff; + u32 tcd5_dlast_sga; + union { + u16 tcd5_biter_elink; + u16 tcd5_biter; + }; + u16 tcd5_csr; + u32 tcd6_saddr; + u16 tcd6_attr; + u16 tcd6_soff; + u32 tcd6_nbytes; + u32 tcd6_slast; + u32 tcd6_daddr; + union { + u16 tcd6_citer; + u16 tcd6_citer_elink; + }; + u16 tcd6_doff; + u32 tcd6_dlast_sga; + union { + u16 tcd6_biter_elink; + u16 tcd6_biter; + }; + u16 tcd6_csr; + u32 tcd7_saddr; + u16 tcd7_attr; + u16 tcd7_soff; + u32 tcd7_nbytes; + u32 tcd7_slast; + u32 tcd7_daddr; + union { + u16 tcd7_citer; + u16 tcd7_citer_elink; + }; + u16 tcd7_doff; + u32 tcd7_dlast_sga; + union { + u16 tcd7_biter_elink; + u16 tcd7_biter; + }; + u16 tcd7_csr; + u32 tcd8_saddr; + u16 tcd8_attr; + u16 tcd8_soff; + u32 tcd8_nbytes; + u32 tcd8_slast; + u32 tcd8_daddr; + union { + u16 tcd8_citer; + u16 tcd8_citer_elink; + }; + u16 tcd8_doff; + u32 tcd8_dlast_sga; + union { + u16 tcd8_biter_elink; + u16 tcd8_biter; + }; + u16 tcd8_csr; + u32 tcd9_saddr; + u16 tcd9_attr; + u16 tcd9_soff; + u32 tcd9_nbytes; + u32 tcd9_slast; + u32 tcd9_daddr; + union { + u16 tcd9_citer_elink; + u16 tcd9_citer; + }; + u16 tcd9_doff; + u32 tcd9_dlast_sga; + union { + u16 tcd9_biter_elink; + u16 tcd9_biter; + }; + u16 tcd9_csr; + u32 tcd10_saddr; + u16 tcd10_attr; + u16 tcd10_soff; + u32 tcd10_nbytes; + u32 tcd10_slast; + u32 tcd10_daddr; + union { + u16 tcd10_citer_elink; + u16 tcd10_citer; + }; + u16 tcd10_doff; + u32 tcd10_dlast_sga; + union { + u16 tcd10_biter; + u16 tcd10_biter_elink; + }; + u16 tcd10_csr; + u32 tcd11_saddr; + u16 tcd11_attr; + u16 tcd11_soff; + u32 tcd11_nbytes; + u32 tcd11_slast; + u32 tcd11_daddr; + union { + u16 tcd11_citer; + u16 tcd11_citer_elink; + }; + u16 tcd11_doff; + u32 tcd11_dlast_sga; + union { + u16 tcd11_biter; + u16 tcd11_biter_elink; + }; + u16 tcd11_csr; + u32 tcd12_saddr; + u16 tcd12_attr; + u16 tcd12_soff; + u32 tcd12_nbytes; + u32 tcd12_slast; + u32 tcd12_daddr; + union { + u16 tcd12_citer; + u16 tcd12_citer_elink; + }; + u16 tcd12_doff; + u32 tcd12_dlast_sga; + union { + u16 tcd12_biter; + u16 tcd12_biter_elink; + }; + u16 tcd12_csr; + u32 tcd13_saddr; + u16 tcd13_attr; + u16 tcd13_soff; + u32 tcd13_nbytes; + u32 tcd13_slast; + u32 tcd13_daddr; + union { + u16 tcd13_citer_elink; + u16 tcd13_citer; + }; + u16 tcd13_doff; + u32 tcd13_dlast_sga; + union { + u16 tcd13_biter_elink; + u16 tcd13_biter; + }; + u16 tcd13_csr; + u32 tcd14_saddr; + u16 tcd14_attr; + u16 tcd14_soff; + u32 tcd14_nbytes; + u32 tcd14_slast; + u32 tcd14_daddr; + union { + u16 tcd14_citer; + u16 tcd14_citer_elink; + }; + u16 tcd14_doff; + u32 tcd14_dlast_sga; + union { + u16 tcd14_biter_elink; + u16 tcd14_biter; + }; + u16 tcd14_csr; + u32 tcd15_saddr; + u16 tcd15_attr; + u16 tcd15_soff; + u32 tcd15_nbytes; + u32 tcd15_slast; + u32 tcd15_daddr; + union { + u16 tcd15_citer_elink; + u16 tcd15_citer; + }; + u16 tcd15_doff; + u32 tcd15_dlast_sga; + union { + u16 tcd15_biter; + u16 tcd15_biter_elink; + }; + u16 tcd15_csr; +} edma_t; + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ + +typedef struct int0_ctrl { + u32 iprh0; /* 0x00 Pending Register High */ + u32 iprl0; /* 0x04 Pending Register Low */ + u32 imrh0; /* 0x08 Mask Register High */ + u32 imrl0; /* 0x0C Mask Register Low */ + u32 frch0; /* 0x10 Force Register High */ + u32 frcl0; /* 0x14 Force Register Low */ + u16 res1; /* 0x18 - 0x19 */ + u16 icfg0; /* 0x1A Configuration Register */ + u8 simr0; /* 0x1C Set Interrupt Mask */ + u8 cimr0; /* 0x1D Clear Interrupt Mask */ + u8 clmask0; /* 0x1E Current Level Mask */ + u8 slmask; /* 0x1F Saved Level Mask */ + u32 res2[8]; /* 0x20 - 0x3F */ + u8 icr0[64]; /* 0x40 - 0x7F Control registers */ + u32 res3[24]; /* 0x80 - 0xDF */ + u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ + u8 res4[3]; /* 0xE1 - 0xE3 */ + u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res5[3]; /* 0xE5 - 0xE7 */ + u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE9 - 0xEB */ + u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xED - 0xEF */ + u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xF1 - 0xF3 */ + u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF5 - 0xF7 */ + u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF9 - 0xFB */ + u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xFD - 0xFF */ +} int0_t; + +typedef struct int1_ctrl { + /* Interrupt Controller 1 */ + u32 iprh1; /* 0x00 Pending Register High */ + u32 iprl1; /* 0x04 Pending Register Low */ + u32 imrh1; /* 0x08 Mask Register High */ + u32 imrl1; /* 0x0C Mask Register Low */ + u32 frch1; /* 0x10 Force Register High */ + u32 frcl1; /* 0x14 Force Register Low */ + u16 res1; /* 0x18 */ + u16 icfg1; /* 0x1A Configuration Register */ + u8 simr1; /* 0x1C Set Interrupt Mask */ + u8 cimr1; /* 0x1D Clear Interrupt Mask */ + u16 res2; /* 0x1E - 0x1F */ + u32 res3[8]; /* 0x20 - 0x3F */ + u8 icr1[64]; /* 0x40 - 0x7F */ + u32 res4[24]; /* 0x80 - 0xDF */ + u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */ + u8 res5[3]; /* 0xE1 - 0xE3 */ + u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE5 - 0xE7 */ + u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xE9 - 0xEB */ + u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xED - 0xEF */ + u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF1 - 0xF3 */ + u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF5 - 0xF7 */ + u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xF9 - 0xFB */ + u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resc[3]; /* 0xFD - 0xFF */ +} int1_t; + +/********************************************************************* +* Global Interrupt Acknowledge (IACK) +*********************************************************************/ + +typedef struct iack { + u8 resv0[0xE0]; + u8 gswiack; + u8 resv1[0x3]; + u8 gl1iack; + u8 resv2[0x3]; + u8 gl2iack; + u8 resv3[0x3]; + u8 gl3iack; + u8 resv4[0x3]; + u8 gl4iack; + u8 resv5[0x3]; + u8 gl5iack; + u8 resv6[0x3]; + u8 gl6iack; + u8 resv7[0x3]; + u8 gl7iack; +} iack_t; + +/********************************************************************* +* DMA Serial Peripheral Interface (DSPI) +*********************************************************************/ + +typedef struct dspi { + u32 dmcr; + u8 resv0[0x4]; + u32 dtcr; + u32 dctar0; + u32 dctar1; + u32 dctar2; + u32 dctar3; + u32 dctar4; + u32 dctar5; + u32 dctar6; + u32 dctar7; + u32 dsr; + u32 dirsr; + u32 dtfr; + u32 drfr; + u32 dtfdr0; + u32 dtfdr1; + u32 dtfdr2; + u32 dtfdr3; + u8 resv1[0x30]; + u32 drfdr0; + u32 drfdr1; + u32 drfdr2; + u32 drfdr3; +} dspi_t; + +/********************************************************************* +* Edge Port Module (EPORT) +*********************************************************************/ + +typedef struct eport { + u16 eppar; + u8 epddr; + u8 epier; + u8 epdr; + u8 eppdr; + u8 epfr; +} eport_t; + +/********************************************************************* +* Watchdog Timer Modules (WTM) +*********************************************************************/ + +typedef struct wtm { + u16 wcr; + u16 wmr; + u16 wcntr; + u16 wsr; +} wtm_t; + +/********************************************************************* +* Serial Boot Facility (SBF) +*********************************************************************/ + +typedef struct sbf { + u8 resv0[0x18]; + u16 sbfsr; /* Serial Boot Facility Status Register */ + u8 resv1[0x6]; + u16 sbfcr; /* Serial Boot Facility Control Register */ +} sbf_t; + +/********************************************************************* +* Reset Controller Module (RCM) +*********************************************************************/ + +typedef struct rcm { + u8 rcr; + u8 rsr; +} rcm_t; + +/********************************************************************* +* Chip Configuration Module (CCM) +*********************************************************************/ + +typedef struct ccm { + u8 ccm_resv0[0x4]; + u16 ccr; /* Chip Configuration Register (256 TEPBGA, Read-only) */ + u8 resv1[0x2]; + u16 rcon; /* Reset Configuration (256 TEPBGA, Read-only) */ + u16 cir; /* Chip Identification Register (Read-only) */ + u8 resv2[0x4]; + u16 misccr; /* Miscellaneous Control Register */ + u16 cdr; /* Clock Divider Register */ + u16 uocsr; /* USB On-the-Go Controller Status Register */ +} ccm_t; + +/********************************************************************* +* General Purpose I/O Module (GPIO) +*********************************************************************/ + +typedef struct gpio { + u8 podr_fec0h; /* FEC0 High Port Output Data Register */ + u8 podr_fec0l; /* FEC0 Low Port Output Data Register */ + u8 podr_ssi; /* SSI Port Output Data Register */ + u8 podr_fbctl; /* Flexbus Control Port Output Data Register */ + u8 podr_be; /* Flexbus Byte Enable Port Output Data Register */ + u8 podr_cs; /* Flexbus Chip-Select Port Output Data Register */ + u8 podr_dma; /* DMA Port Output Data Register */ + u8 podr_feci2c; /* FEC1 / I2C Port Output Data Register */ + u8 resv0[0x1]; + u8 podr_uart; /* UART Port Output Data Register */ + u8 podr_dspi; /* DSPI Port Output Data Register */ + u8 podr_timer; /* Timer Port Output Data Register */ + u8 podr_pci; /* PCI Port Output Data Register */ + u8 podr_usb; /* USB Port Output Data Register */ + u8 podr_atah; /* ATA High Port Output Data Register */ + u8 podr_atal; /* ATA Low Port Output Data Register */ + u8 podr_fec1h; /* FEC1 High Port Output Data Register */ + u8 podr_fec1l; /* FEC1 Low Port Output Data Register */ + u8 resv1[0x2]; + u8 podr_fbadh; /* Flexbus AD High Port Output Data Register */ + u8 podr_fbadmh; /* Flexbus AD Med-High Port Output Data Register */ + u8 podr_fbadml; /* Flexbus AD Med-Low Port Output Data Register */ + u8 podr_fbadl; /* Flexbus AD Low Port Output Data Register */ + u8 pddr_fec0h; /* FEC0 High Port Data Direction Register */ + u8 pddr_fec0l; /* FEC0 Low Port Data Direction Register */ + u8 pddr_ssi; /* SSI Port Data Direction Register */ + u8 pddr_fbctl; /* Flexbus Control Port Data Direction Register */ + u8 pddr_be; /* Flexbus Byte Enable Port Data Direction Register */ + u8 pddr_cs; /* Flexbus Chip-Select Port Data Direction Register */ + u8 pddr_dma; /* DMA Port Data Direction Register */ + u8 pddr_feci2c; /* FEC1 / I2C Port Data Direction Register */ + u8 resv2[0x1]; + u8 pddr_uart; /* UART Port Data Direction Register */ + u8 pddr_dspi; /* DSPI Port Data Direction Register */ + u8 pddr_timer; /* Timer Port Data Direction Register */ + u8 pddr_pci; /* PCI Port Data Direction Register */ + u8 pddr_usb; /* USB Port Data Direction Register */ + u8 pddr_atah; /* ATA High Port Data Direction Register */ + u8 pddr_atal; /* ATA Low Port Data Direction Register */ + u8 pddr_fec1h; /* FEC1 High Port Data Direction Register */ + u8 pddr_fec1l; /* FEC1 Low Port Data Direction Register */ + u8 resv3[0x2]; + u8 pddr_fbadh; /* Flexbus AD High Port Data Direction Register */ + u8 pddr_fbadmh; /* Flexbus AD Med-High Port Data Direction Register */ + u8 pddr_fbadml; /* Flexbus AD Med-Low Port Data Direction Register */ + u8 pddr_fbadl; /* Flexbus AD Low Port Data Direction Register */ + u8 ppdsdr_fec0h; /* FEC0 High Port Pin Data/Set Data Register */ + u8 ppdsdr_fec0l; /* FEC0 Low Port Clear Output Data Register */ + u8 ppdsdr_ssi; /* SSI Port Pin Data/Set Data Register */ + u8 ppdsdr_fbctl; /* Flexbus Control Port Pin Data/Set Data Register */ + u8 ppdsdr_be; /* Flexbus Byte Enable Port Pin Data/Set Data Register */ + u8 ppdsdr_cs; /* Flexbus Chip-Select Port Pin Data/Set Data Register */ + u8 ppdsdr_dma; /* DMA Port Pin Data/Set Data Register */ + u8 ppdsdr_feci2c; /* FEC1 / I2C Port Pin Data/Set Data Register */ + u8 resv4[0x1]; + u8 ppdsdr_uart; /* UART Port Pin Data/Set Data Register */ + u8 ppdsdr_dspi; /* DSPI Port Pin Data/Set Data Register */ + u8 ppdsdr_timer; /* FTimer Port Pin Data/Set Data Register */ + u8 ppdsdr_pci; /* PCI Port Pin Data/Set Data Register */ + u8 ppdsdr_usb; /* USB Port Pin Data/Set Data Register */ + u8 ppdsdr_atah; /* ATA High Port Pin Data/Set Data Register */ + u8 ppdsdr_atal; /* ATA Low Port Pin Data/Set Data Register */ + u8 ppdsdr_fec1h; /* FEC1 High Port Pin Data/Set Data Register */ + u8 ppdsdr_fec1l; /* FEC1 Low Port Pin Data/Set Data Register */ + u8 resv5[0x2]; + u8 ppdsdr_fbadh; /* Flexbus AD High Port Pin Data/Set Data Register */ + u8 ppdsdr_fbadmh; /* Flexbus AD Med-High Port Pin Data/Set Data Register */ + u8 ppdsdr_fbadml; /* Flexbus AD Med-Low Port Pin Data/Set Data Register */ + u8 ppdsdr_fbadl; /* Flexbus AD Low Port Pin Data/Set Data Register */ + u8 pclrr_fec0h; /* FEC0 High Port Clear Output Data Register */ + u8 pclrr_fec0l; /* FEC0 Low Port Pin Data/Set Data Register */ + u8 pclrr_ssi; /* SSI Port Clear Output Data Register */ + u8 pclrr_fbctl; /* Flexbus Control Port Clear Output Data Register */ + u8 pclrr_be; /* Flexbus Byte Enable Port Clear Output Data Register */ + u8 pclrr_cs; /* Flexbus Chip-Select Port Clear Output Data Register */ + u8 pclrr_dma; /* DMA Port Clear Output Data Register */ + u8 pclrr_feci2c; /* FEC1 / I2C Port Clear Output Data Register */ + u8 resv6[0x1]; + u8 pclrr_uart; /* UART Port Clear Output Data Register */ + u8 pclrr_dspi; /* DSPI Port Clear Output Data Register */ + u8 pclrr_timer; /* Timer Port Clear Output Data Register */ + u8 pclrr_pci; /* PCI Port Clear Output Data Register */ + u8 pclrr_usb; /* USB Port Clear Output Data Register */ + u8 pclrr_atah; /* ATA High Port Clear Output Data Register */ + u8 pclrr_atal; /* ATA Low Port Clear Output Data Register */ + u8 pclrr_fec1h; /* FEC1 High Port Clear Output Data Register */ + u8 pclrr_fec1l; /* FEC1 Low Port Clear Output Data Register */ + u8 resv7[0x2]; + u8 pclrr_fbadh; /* Flexbus AD High Port Clear Output Data Register */ + u8 pclrr_fbadmh; /* Flexbus AD Med-High Port Clear Output Data Register */ + u8 pclrr_fbadml; /* Flexbus AD Med-Low Port Clear Output Data Register */ + u8 pclrr_fbadl; /* Flexbus AD Low Port Clear Output Data Register */ + u8 par_fec; /* FEC Pin Assignment Register */ + u8 par_dma; /* DMA Pin Assignment Register */ + u8 par_fbctl; /* Flexbus Control Pin Assignment Register */ + u8 par_dspi; /* DSPI Pin Assignment Register */ + u8 par_be; /* Flexbus Byte-Enable Pin Assignment Register */ + u8 par_cs; /* Flexbus Chip-Select Pin Assignment Register */ + u8 par_timer; /* Time Pin Assignment Register */ + u8 par_usb; /* USB Pin Assignment Register */ + u8 resv8[0x1]; + u8 par_uart; /* UART Pin Assignment Register */ + u16 par_feci2c; /* FEC / I2C Pin Assignment Register */ + u16 par_ssi; /* SSI Pin Assignment Register */ + u16 par_ata; /* ATA Pin Assignment Register */ + u8 par_irq; /* IRQ Pin Assignment Register */ + u8 resv9[0x1]; + u16 par_pci; /* PCI Pin Assignment Register */ + u8 mscr_sdram; /* SDRAM Mode Select Control Register */ + u8 mscr_pci; /* PCI Mode Select Control Register */ + u8 resv10[0x2]; + u8 dscr_i2c; /* I2C Drive Strength Control Register */ + u8 dscr_flexbus; /* FLEXBUS Drive Strength Control Register */ + u8 dscr_fec; /* FEC Drive Strength Control Register */ + u8 dscr_uart; /* UART Drive Strength Control Register */ + u8 dscr_dspi; /* DSPI Drive Strength Control Register */ + u8 dscr_timer; /* TIMER Drive Strength Control Register */ + u8 dscr_ssi; /* SSI Drive Strength Control Register */ + u8 dscr_dma; /* DMA Drive Strength Control Register */ + u8 dscr_debug; /* DEBUG Drive Strength Control Register */ + u8 dscr_reset; /* RESET Drive Strength Control Register */ + u8 dscr_irq; /* IRQ Drive Strength Control Register */ + u8 dscr_usb; /* USB Drive Strength Control Register */ + u8 dscr_ata; /* ATA Drive Strength Control Register */ +} gpio_t; + +/********************************************************************* +* Random Number Generator (RNG) +*********************************************************************/ + +typedef struct rng { + u32 rngcr; + u32 rngsr; + u32 rnger; + u32 rngout; +} rng_t; + +/********************************************************************* +* SDRAM Controller (SDRAMC) +*********************************************************************/ + +typedef struct sdramc { + u32 sdmr; /* SDRAM Mode/Extended Mode Register */ + u32 sdcr; /* SDRAM Control Register */ + u32 sdcfg1; /* SDRAM Configuration Register 1 */ + u32 sdcfg2; /* SDRAM Chip Select Register */ + u8 resv0[0x100]; + u32 sdcs0; /* SDRAM Mode/Extended Mode Register */ + u32 sdcs1; /* SDRAM Mode/Extended Mode Register */ +} sdramc_t; + +/********************************************************************* +* Synchronous Serial Interface (SSI) +*********************************************************************/ + +typedef struct ssi { + u32 tx0; + u32 tx1; + u32 rx0; + u32 rx1; + u32 cr; + u32 isr; + u32 ier; + u32 tcr; + u32 rcr; + u32 ccr; + u8 resv0[0x4]; + u32 fcsr; + u8 resv1[0x8]; + u32 acr; + u32 acadd; + u32 acdat; + u32 atag; + u32 tmask; + u32 rmask; +} ssi_t; + +/********************************************************************* +* Phase Locked Loop (PLL) +*********************************************************************/ + +typedef struct pll { + u32 pcr; /* PLL Control Register */ + u32 psr; /* PLL Status Register */ +} pll_t; + +typedef struct pci { + u32 idr; /* 0x00 Device Id / Vendor Id Register */ + u32 scr; /* 0x04 Status / command Register */ + u32 ccrir; /* 0x08 Class Code / Revision Id Register */ + u32 cr1; /* 0x0c Configuration 1 Register */ + u32 bar0; /* 0x10 Base address register 0 Register */ + u32 bar1; /* 0x14 Base address register 1 Register */ + u32 bar2; /* 0x18 Base address register 2 Register */ + u32 bar3; /* 0x1c Base address register 3 Register */ + u32 bar4; /* 0x20 Base address register 4 Register */ + u32 bar5; /* 0x24 Base address register 5 Register */ + u32 ccpr; /* 0x28 Cardbus CIS Pointer Register */ + u32 sid; /* 0x2c Subsystem ID / Subsystem Vendor ID Register */ + u32 erbar; /* 0x30 Expansion ROM Base Address Register */ + u32 cpr; /* 0x34 Capabilities Pointer Register */ + u32 rsvd1; /* 0x38 */ + u32 cr2; /* 0x3c Configuration Register 2 */ + u32 rsvd2[8]; /* 0x40 - 0x5f */ + + /* General control / status registers */ + u32 gscr; /* 0x60 Global Status / Control Register */ + u32 tbatr0a; /* 0x64 Target Base Address Translation Register 0 */ + u32 tbatr1a; /* 0x68 Target Base Address Translation Register 1 */ + u32 tcr1; /* 0x6c Target Control 1 Register */ + u32 iw0btar; /* 0x70 Initiator Window 0 Base/Translation addr */ + u32 iw1btar; /* 0x74 Initiator Window 1 Base/Translation addr */ + u32 iw2btar; /* 0x78 Initiator Window 2 Base/Translation addr */ + u32 rsvd3; /* 0x7c */ + u32 iwcr; /* 0x80 Initiator Window Configuration Register */ + u32 icr; /* 0x84 Initiator Control Register */ + u32 isr; /* 0x88 Initiator Status Register */ + u32 tcr2; /* 0x8c Target Control 2 Register */ + u32 tbatr0; /* 0x90 Target Base Address Translation Register 0 */ + u32 tbatr1; /* 0x94 Target Base Address Translation Register 1 */ + u32 tbatr2; /* 0x98 Target Base Address Translation Register 2 */ + u32 tbatr3; /* 0x9c Target Base Address Translation Register 3 */ + u32 tbatr4; /* 0xa0 Target Base Address Translation Register 4 */ + u32 tbatr5; /* 0xa4 Target Base Address Translation Register 5 */ + u32 intr; /* 0xa8 Interrupt Register */ + u32 rsvd4[19]; /* 0xac - 0xf7 */ + u32 car; /* 0xf8 Configuration Address Register */ +} pci_t; + +typedef struct pci_arbiter { + /* Pci Arbiter Registers */ + union { + u32 acr; /* Arbiter Control Register */ + u32 asr; /* Arbiter Status Register */ + }; +} pciarb_t; + +/* Register read/write struct */ +typedef struct scm1 { + u32 mpr; /* 0x00 Master Privilege Register */ + u32 rsvd1[7]; + u32 pacra; /* 0x20 Peripheral Access Control Register A */ + u32 pacrb; /* 0x24 Peripheral Access Control Register B */ + u32 pacrc; /* 0x28 Peripheral Access Control Register C */ + u32 pacrd; /* 0x2C Peripheral Access Control Register D */ + u32 rsvd2[4]; + u32 pacre; /* 0x40 Peripheral Access Control Register E */ + u32 pacrf; /* 0x44 Peripheral Access Control Register F */ + u32 pacrg; /* 0x48 Peripheral Access Control Register G */ +} scm1_t; +/********************************************************************/ + +typedef struct rtcex { + u32 rsvd1[3]; + u32 gocu; + u32 gocl; +} rtcex_t; +#endif /* __IMMAP_5445X__ */ diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h new file mode 100644 index 0000000..8b886b0 --- /dev/null +++ b/include/asm-m68k/m5445x.h @@ -0,0 +1,1541 @@ +/* + * MCF5445x Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MCF5445X__ +#define __MCF5445X__ + +/********************************************************************* +* Cross-bar switch (XBS) +*********************************************************************/ + +/* Bit definitions and macros for PRS group */ +#define XBS_PRS_M0(x) (((x)&0x00000007)) /* Core */ +#define XBS_PRS_M1(x) (((x)&0x00000007)<<4) /* eDMA */ +#define XBS_PRS_M2(x) (((x)&0x00000007)<<8) /* FEC0 */ +#define XBS_PRS_M3(x) (((x)&0x00000007)<<12) /* FEC1 */ +#define XBS_PRS_M5(x) (((x)&0x00000007)<<20) /* PCI controller */ +#define XBS_PRS_M6(x) (((x)&0x00000007)<<24) /* USB OTG */ +#define XBS_PRS_M7(x) (((x)&0x00000007)<<28) /* Serial Boot */ + +/* Bit definitions and macros for CRS group */ +#define XBS_CRS_PARK(x) (((x)&0x00000007)) /* Master parking ctrl */ +#define XBS_CRS_PCTL(x) (((x)&0x00000003)<<4) /* Parking mode ctrl */ +#define XBS_CRS_ARB (0x00000100) /* Arbitration Mode */ +#define XBS_CRS_RO (0x80000000) /* Read Only */ + +#define XBS_CRS_PCTL_PARK_FIELD (0) +#define XBS_CRS_PCTL_PARK_ON_LAST (1) +#define XBS_CRS_PCTL_PARK_NONE (2) +#define XBS_CRS_PCTL_PARK_CORE (0) +#define XBS_CRS_PCTL_PARK_EDMA (1) +#define XBS_CRS_PCTL_PARK_FEC0 (2) +#define XBS_CRS_PCTL_PARK_FEC1 (3) +#define XBS_CRS_PCTL_PARK_PCI (5) +#define XBS_CRS_PCTL_PARK_USB (6) +#define XBS_CRS_PCTL_PARK_SBF (7) + +/********************************************************************* +* FlexBus Chip Selects (FBCS) +*********************************************************************/ + +/* Bit definitions and macros for CSAR group */ +#define FBCS_CSAR_BA(x) ((x)&0xFFFF0000) + +/* Bit definitions and macros for CSMR group */ +#define FBCS_CSMR_V (0x00000001) /* Valid bit */ +#define FBCS_CSMR_WP (0x00000100) /* Write protect */ +#define FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */ +#define FBCS_CSMR_BAM_4G (0xFFFF0000) +#define FBCS_CSMR_BAM_2G (0x7FFF0000) +#define FBCS_CSMR_BAM_1G (0x3FFF0000) +#define FBCS_CSMR_BAM_1024M (0x3FFF0000) +#define FBCS_CSMR_BAM_512M (0x1FFF0000) +#define FBCS_CSMR_BAM_256M (0x0FFF0000) +#define FBCS_CSMR_BAM_128M (0x07FF0000) +#define FBCS_CSMR_BAM_64M (0x03FF0000) +#define FBCS_CSMR_BAM_32M (0x01FF0000) +#define FBCS_CSMR_BAM_16M (0x00FF0000) +#define FBCS_CSMR_BAM_8M (0x007F0000) +#define FBCS_CSMR_BAM_4M (0x003F0000) +#define FBCS_CSMR_BAM_2M (0x001F0000) +#define FBCS_CSMR_BAM_1M (0x000F0000) +#define FBCS_CSMR_BAM_1024K (0x000F0000) +#define FBCS_CSMR_BAM_512K (0x00070000) +#define FBCS_CSMR_BAM_256K (0x00030000) +#define FBCS_CSMR_BAM_128K (0x00010000) +#define FBCS_CSMR_BAM_64K (0x00000000) + +/* Bit definitions and macros for CSCR group */ +#define FBCS_CSCR_BSTW (0x00000008) /* Burst-write enable */ +#define FBCS_CSCR_BSTR (0x00000010) /* Burst-read enable */ +#define FBCS_CSCR_BEM (0x00000020) /* Byte-enable mode */ +#define FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) /* Port size */ +#define FBCS_CSCR_AA (0x00000100) /* Auto-acknowledge */ +#define FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ +#define FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ +#define FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ +#define FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ +#define FBCS_CSCR_SWSEN (0x00800000) /* Secondary wait state enable */ +#define FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ + +#define FBCS_CSCR_PS_8 (0x00000040) +#define FBCS_CSCR_PS_16 (0x00000080) +#define FBCS_CSCR_PS_32 (0x00000000) + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_EDMA_00 (8) +#define INT0_LO_EDMA_01 (9) +#define INT0_LO_EDMA_02 (10) +#define INT0_LO_EDMA_03 (11) +#define INT0_LO_EDMA_04 (12) +#define INT0_LO_EDMA_05 (13) +#define INT0_LO_EDMA_06 (14) +#define INT0_LO_EDMA_07 (15) +#define INT0_LO_EDMA_08 (16) +#define INT0_LO_EDMA_09 (17) +#define INT0_LO_EDMA_10 (18) +#define INT0_LO_EDMA_11 (19) +#define INT0_LO_EDMA_12 (20) +#define INT0_LO_EDMA_13 (21) +#define INT0_LO_EDMA_14 (22) +#define INT0_LO_EDMA_15 (23) +#define INT0_LO_EDMA_ERR (24) +#define INT0_LO_SCM (25) +#define INT0_LO_UART0 (26) +#define INT0_LO_UART1 (27) +#define INT0_LO_UART2 (28) +#define INT0_LO_RSVD1 (29) +#define INT0_LO_I2C (30) +#define INT0_LO_QSPI (31) +#define INT0_HI_DTMR0 (32) +#define INT0_HI_DTMR1 (33) +#define INT0_HI_DTMR2 (34) +#define INT0_HI_DTMR3 (35) +#define INT0_HI_FEC0_TXF (36) +#define INT0_HI_FEC0_TXB (37) +#define INT0_HI_FEC0_UN (38) +#define INT0_HI_FEC0_RL (39) +#define INT0_HI_FEC0_RXF (40) +#define INT0_HI_FEC0_RXB (41) +#define INT0_HI_FEC0_MII (42) +#define INT0_HI_FEC0_LC (43) +#define INT0_HI_FEC0_HBERR (44) +#define INT0_HI_FEC0_GRA (45) +#define INT0_HI_FEC0_EBERR (46) +#define INT0_HI_FEC0_BABT (47) +#define INT0_HI_FEC0_BABR (48) +#define INT0_HI_FEC1_TXF (49) +#define INT0_HI_FEC1_TXB (50) +#define INT0_HI_FEC1_UN (51) +#define INT0_HI_FEC1_RL (52) +#define INT0_HI_FEC1_RXF (53) +#define INT0_HI_FEC1_RXB (54) +#define INT0_HI_FEC1_MII (55) +#define INT0_HI_FEC1_LC (56) +#define INT0_HI_FEC1_HBERR (57) +#define INT0_HI_FEC1_GRA (58) +#define INT0_HI_FEC1_EBERR (59) +#define INT0_HI_FEC1_BABT (60) +#define INT0_HI_FEC1_BABR (61) +#define INT0_HI_SCMIR (62) +#define INT0_HI_RTC_ISR (63) + +#define INT1_HI_DSPI_EOQF (33) +#define INT1_HI_DSPI_TFFF (34) +#define INT1_HI_DSPI_TCF (35) +#define INT1_HI_DSPI_TFUF (36) +#define INT1_HI_DSPI_RFDF (37) +#define INT1_HI_DSPI_RFOF (38) +#define INT1_HI_DSPI_RFOF_TFUF (39) +#define INT1_HI_RNG_EI (40) +#define INT1_HI_PIT0_PIF (43) +#define INT1_HI_PIT1_PIF (44) +#define INT1_HI_PIT2_PIF (45) +#define INT1_HI_PIT3_PIF (46) +#define INT1_HI_USBOTG_USBSTS (47) +#define INT1_HI_SSI_ISR (49) +#define INT1_HI_CCM_UOCSR (53) +#define INT1_HI_ATA_ISR (54) +#define INT1_HI_PCI_SCR (55) +#define INT1_HI_PCI_ASR (56) +#define INT1_HI_PLL_LOCKS (57) + +/* Bit definitions and macros for IPRH */ +#define INTC_IPRH_INT32 (0x00000001) +#define INTC_IPRH_INT33 (0x00000002) +#define INTC_IPRH_INT34 (0x00000004) +#define INTC_IPRH_INT35 (0x00000008) +#define INTC_IPRH_INT36 (0x00000010) +#define INTC_IPRH_INT37 (0x00000020) +#define INTC_IPRH_INT38 (0x00000040) +#define INTC_IPRH_INT39 (0x00000080) +#define INTC_IPRH_INT40 (0x00000100) +#define INTC_IPRH_INT41 (0x00000200) +#define INTC_IPRH_INT42 (0x00000400) +#define INTC_IPRH_INT43 (0x00000800) +#define INTC_IPRH_INT44 (0x00001000) +#define INTC_IPRH_INT45 (0x00002000) +#define INTC_IPRH_INT46 (0x00004000) +#define INTC_IPRH_INT47 (0x00008000) +#define INTC_IPRH_INT48 (0x00010000) +#define INTC_IPRH_INT49 (0x00020000) +#define INTC_IPRH_INT50 (0x00040000) +#define INTC_IPRH_INT51 (0x00080000) +#define INTC_IPRH_INT52 (0x00100000) +#define INTC_IPRH_INT53 (0x00200000) +#define INTC_IPRH_INT54 (0x00400000) +#define INTC_IPRH_INT55 (0x00800000) +#define INTC_IPRH_INT56 (0x01000000) +#define INTC_IPRH_INT57 (0x02000000) +#define INTC_IPRH_INT58 (0x04000000) +#define INTC_IPRH_INT59 (0x08000000) +#define INTC_IPRH_INT60 (0x10000000) +#define INTC_IPRH_INT61 (0x20000000) +#define INTC_IPRH_INT62 (0x40000000) +#define INTC_IPRH_INT63 (0x80000000) + +/* Bit definitions and macros for IPRL */ +#define INTC_IPRL_INT0 (0x00000001) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT31 (0x80000000) + +/* Bit definitions and macros for IMRH */ +#define INTC_IMRH_INT_MASK32 (0x00000001) +#define INTC_IMRH_INT_MASK33 (0x00000002) +#define INTC_IMRH_INT_MASK34 (0x00000004) +#define INTC_IMRH_INT_MASK35 (0x00000008) +#define INTC_IMRH_INT_MASK36 (0x00000010) +#define INTC_IMRH_INT_MASK37 (0x00000020) +#define INTC_IMRH_INT_MASK38 (0x00000040) +#define INTC_IMRH_INT_MASK39 (0x00000080) +#define INTC_IMRH_INT_MASK40 (0x00000100) +#define INTC_IMRH_INT_MASK41 (0x00000200) +#define INTC_IMRH_INT_MASK42 (0x00000400) +#define INTC_IMRH_INT_MASK43 (0x00000800) +#define INTC_IMRH_INT_MASK44 (0x00001000) +#define INTC_IMRH_INT_MASK45 (0x00002000) +#define INTC_IMRH_INT_MASK46 (0x00004000) +#define INTC_IMRH_INT_MASK47 (0x00008000) +#define INTC_IMRH_INT_MASK48 (0x00010000) +#define INTC_IMRH_INT_MASK49 (0x00020000) +#define INTC_IMRH_INT_MASK50 (0x00040000) +#define INTC_IMRH_INT_MASK51 (0x00080000) +#define INTC_IMRH_INT_MASK52 (0x00100000) +#define INTC_IMRH_INT_MASK53 (0x00200000) +#define INTC_IMRH_INT_MASK54 (0x00400000) +#define INTC_IMRH_INT_MASK55 (0x00800000) +#define INTC_IMRH_INT_MASK56 (0x01000000) +#define INTC_IMRH_INT_MASK57 (0x02000000) +#define INTC_IMRH_INT_MASK58 (0x04000000) +#define INTC_IMRH_INT_MASK59 (0x08000000) +#define INTC_IMRH_INT_MASK60 (0x10000000) +#define INTC_IMRH_INT_MASK61 (0x20000000) +#define INTC_IMRH_INT_MASK62 (0x40000000) +#define INTC_IMRH_INT_MASK63 (0x80000000) + +/* Bit definitions and macros for IMRL */ +#define INTC_IMRL_INT_MASK0 (0x00000001) +#define INTC_IMRL_INT_MASK1 (0x00000002) +#define INTC_IMRL_INT_MASK2 (0x00000004) +#define INTC_IMRL_INT_MASK3 (0x00000008) +#define INTC_IMRL_INT_MASK4 (0x00000010) +#define INTC_IMRL_INT_MASK5 (0x00000020) +#define INTC_IMRL_INT_MASK6 (0x00000040) +#define INTC_IMRL_INT_MASK7 (0x00000080) +#define INTC_IMRL_INT_MASK8 (0x00000100) +#define INTC_IMRL_INT_MASK9 (0x00000200) +#define INTC_IMRL_INT_MASK10 (0x00000400) +#define INTC_IMRL_INT_MASK11 (0x00000800) +#define INTC_IMRL_INT_MASK12 (0x00001000) +#define INTC_IMRL_INT_MASK13 (0x00002000) +#define INTC_IMRL_INT_MASK14 (0x00004000) +#define INTC_IMRL_INT_MASK15 (0x00008000) +#define INTC_IMRL_INT_MASK16 (0x00010000) +#define INTC_IMRL_INT_MASK17 (0x00020000) +#define INTC_IMRL_INT_MASK18 (0x00040000) +#define INTC_IMRL_INT_MASK19 (0x00080000) +#define INTC_IMRL_INT_MASK20 (0x00100000) +#define INTC_IMRL_INT_MASK21 (0x00200000) +#define INTC_IMRL_INT_MASK22 (0x00400000) +#define INTC_IMRL_INT_MASK23 (0x00800000) +#define INTC_IMRL_INT_MASK24 (0x01000000) +#define INTC_IMRL_INT_MASK25 (0x02000000) +#define INTC_IMRL_INT_MASK26 (0x04000000) +#define INTC_IMRL_INT_MASK27 (0x08000000) +#define INTC_IMRL_INT_MASK28 (0x10000000) +#define INTC_IMRL_INT_MASK29 (0x20000000) +#define INTC_IMRL_INT_MASK30 (0x40000000) +#define INTC_IMRL_INT_MASK31 (0x80000000) + +/* Bit definitions and macros for INTFRCH */ +#define INTC_INTFRCH_INTFRC32 (0x00000001) +#define INTC_INTFRCH_INTFRC33 (0x00000002) +#define INTC_INTFRCH_INTFRC34 (0x00000004) +#define INTC_INTFRCH_INTFRC35 (0x00000008) +#define INTC_INTFRCH_INTFRC36 (0x00000010) +#define INTC_INTFRCH_INTFRC37 (0x00000020) +#define INTC_INTFRCH_INTFRC38 (0x00000040) +#define INTC_INTFRCH_INTFRC39 (0x00000080) +#define INTC_INTFRCH_INTFRC40 (0x00000100) +#define INTC_INTFRCH_INTFRC41 (0x00000200) +#define INTC_INTFRCH_INTFRC42 (0x00000400) +#define INTC_INTFRCH_INTFRC43 (0x00000800) +#define INTC_INTFRCH_INTFRC44 (0x00001000) +#define INTC_INTFRCH_INTFRC45 (0x00002000) +#define INTC_INTFRCH_INTFRC46 (0x00004000) +#define INTC_INTFRCH_INTFRC47 (0x00008000) +#define INTC_INTFRCH_INTFRC48 (0x00010000) +#define INTC_INTFRCH_INTFRC49 (0x00020000) +#define INTC_INTFRCH_INTFRC50 (0x00040000) +#define INTC_INTFRCH_INTFRC51 (0x00080000) +#define INTC_INTFRCH_INTFRC52 (0x00100000) +#define INTC_INTFRCH_INTFRC53 (0x00200000) +#define INTC_INTFRCH_INTFRC54 (0x00400000) +#define INTC_INTFRCH_INTFRC55 (0x00800000) +#define INTC_INTFRCH_INTFRC56 (0x01000000) +#define INTC_INTFRCH_INTFRC57 (0x02000000) +#define INTC_INTFRCH_INTFRC58 (0x04000000) +#define INTC_INTFRCH_INTFRC59 (0x08000000) +#define INTC_INTFRCH_INTFRC60 (0x10000000) +#define INTC_INTFRCH_INTFRC61 (0x20000000) +#define INTC_INTFRCH_INTFRC62 (0x40000000) +#define INTC_INTFRCH_INTFRC63 (0x80000000) + +/* Bit definitions and macros for INTFRCL */ +#define INTC_INTFRCL_INTFRC0 (0x00000001) +#define INTC_INTFRCL_INTFRC1 (0x00000002) +#define INTC_INTFRCL_INTFRC2 (0x00000004) +#define INTC_INTFRCL_INTFRC3 (0x00000008) +#define INTC_INTFRCL_INTFRC4 (0x00000010) +#define INTC_INTFRCL_INTFRC5 (0x00000020) +#define INTC_INTFRCL_INTFRC6 (0x00000040) +#define INTC_INTFRCL_INTFRC7 (0x00000080) +#define INTC_INTFRCL_INTFRC8 (0x00000100) +#define INTC_INTFRCL_INTFRC9 (0x00000200) +#define INTC_INTFRCL_INTFRC10 (0x00000400) +#define INTC_INTFRCL_INTFRC11 (0x00000800) +#define INTC_INTFRCL_INTFRC12 (0x00001000) +#define INTC_INTFRCL_INTFRC13 (0x00002000) +#define INTC_INTFRCL_INTFRC14 (0x00004000) +#define INTC_INTFRCL_INTFRC15 (0x00008000) +#define INTC_INTFRCL_INTFRC16 (0x00010000) +#define INTC_INTFRCL_INTFRC17 (0x00020000) +#define INTC_INTFRCL_INTFRC18 (0x00040000) +#define INTC_INTFRCL_INTFRC19 (0x00080000) +#define INTC_INTFRCL_INTFRC20 (0x00100000) +#define INTC_INTFRCL_INTFRC21 (0x00200000) +#define INTC_INTFRCL_INTFRC22 (0x00400000) +#define INTC_INTFRCL_INTFRC23 (0x00800000) +#define INTC_INTFRCL_INTFRC24 (0x01000000) +#define INTC_INTFRCL_INTFRC25 (0x02000000) +#define INTC_INTFRCL_INTFRC26 (0x04000000) +#define INTC_INTFRCL_INTFRC27 (0x08000000) +#define INTC_INTFRCL_INTFRC28 (0x10000000) +#define INTC_INTFRCL_INTFRC29 (0x20000000) +#define INTC_INTFRCL_INTFRC30 (0x40000000) +#define INTC_INTFRCL_INTFRC31 (0x80000000) + +/* Bit definitions and macros for ICONFIG */ +#define INTC_ICONFIG_EMASK (0x0020) +#define INTC_ICONFIG_ELVLPRI1 (0x0200) +#define INTC_ICONFIG_ELVLPRI2 (0x0400) +#define INTC_ICONFIG_ELVLPRI3 (0x0800) +#define INTC_ICONFIG_ELVLPRI4 (0x1000) +#define INTC_ICONFIG_ELVLPRI5 (0x2000) +#define INTC_ICONFIG_ELVLPRI6 (0x4000) +#define INTC_ICONFIG_ELVLPRI7 (0x8000) + +/* Bit definitions and macros for SIMR */ +#define INTC_SIMR_SIMR(x) (((x)&0x7F)) + +/* Bit definitions and macros for CIMR */ +#define INTC_CIMR_CIMR(x) (((x)&0x7F)) + +/* Bit definitions and macros for CLMASK */ +#define INTC_CLMASK_CLMASK(x) (((x)&0x0F)) + +/* Bit definitions and macros for SLMASK */ +#define INTC_SLMASK_SLMASK(x) (((x)&0x0F)) + +/* Bit definitions and macros for ICR group */ +#define INTC_ICR_IL(x) (((x)&0x07)) + +/********************************************************************* +* DMA Serial Peripheral Interface (DSPI) +*********************************************************************/ + +/* Bit definitions and macros for DMCR */ +#define DSPI_DMCR_HALT (0x00000001) +#define DSPI_DMCR_SMPL_PT(x) (((x)&0x00000003)<<8) +#define DSPI_DMCR_CRXF (0x00000400) +#define DSPI_DMCR_CTXF (0x00000800) +#define DSPI_DMCR_DRXF (0x00001000) +#define DSPI_DMCR_DTXF (0x00002000) +#define DSPI_DMCR_CSIS0 (0x00010000) +#define DSPI_DMCR_CSIS2 (0x00040000) +#define DSPI_DMCR_CSIS3 (0x00080000) +#define DSPI_DMCR_CSIS5 (0x00200000) +#define DSPI_DMCR_ROOE (0x01000000) +#define DSPI_DMCR_PCSSE (0x02000000) +#define DSPI_DMCR_MTFE (0x04000000) +#define DSPI_DMCR_FRZ (0x08000000) +#define DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28) +#define DSPI_DMCR_CSCK (0x40000000) +#define DSPI_DMCR_MSTR (0x80000000) + +/* Bit definitions and macros for DTCR */ +#define DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16) + +/* Bit definitions and macros for DCTAR group */ +#define DSPI_DCTAR_BR(x) (((x)&0x0000000F)) +#define DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4) +#define DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8) +#define DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12) +#define DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16) +#define DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18) +#define DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20) +#define DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22) +#define DSPI_DCTAR_LSBFE (0x01000000) +#define DSPI_DCTAR_CPHA (0x02000000) +#define DSPI_DCTAR_CPOL (0x04000000) +#define DSPI_DCTAR_TRSZ(x) (((x)&0x0000000F)<<27) +#define DSPI_DCTAR_PCSSCK_1CLK (0x00000000) +#define DSPI_DCTAR_PCSSCK_3CLK (0x00400000) +#define DSPI_DCTAR_PCSSCK_5CLK (0x00800000) +#define DSPI_DCTAR_PCSSCK_7CLK (0x00A00000) +#define DSPI_DCTAR_PASC_1CLK (0x00000000) +#define DSPI_DCTAR_PASC_3CLK (0x00100000) +#define DSPI_DCTAR_PASC_5CLK (0x00200000) +#define DSPI_DCTAR_PASC_7CLK (0x00300000) +#define DSPI_DCTAR_PDT_1CLK (0x00000000) +#define DSPI_DCTAR_PDT_3CLK (0x00040000) +#define DSPI_DCTAR_PDT_5CLK (0x00080000) +#define DSPI_DCTAR_PDT_7CLK (0x000A0000) +#define DSPI_DCTAR_PBR_1CLK (0x00000000) +#define DSPI_DCTAR_PBR_3CLK (0x00010000) +#define DSPI_DCTAR_PBR_5CLK (0x00020000) +#define DSPI_DCTAR_PBR_7CLK (0x00030000) + +/* Bit definitions and macros for DSR */ +#define DSPI_DSR_RXPTR(x) (((x)&0x0000000F)) +#define DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4) +#define DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8) +#define DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12) +#define DSPI_DSR_RFDF (0x00020000) +#define DSPI_DSR_RFOF (0x00080000) +#define DSPI_DSR_TFFF (0x02000000) +#define DSPI_DSR_TFUF (0x08000000) +#define DSPI_DSR_EOQF (0x10000000) +#define DSPI_DSR_TXRXS (0x40000000) +#define DSPI_DSR_TCF (0x80000000) + +/* Bit definitions and macros for DIRSR */ +#define DSPI_DIRSR_RFDFS (0x00010000) +#define DSPI_DIRSR_RFDFE (0x00020000) +#define DSPI_DIRSR_RFOFE (0x00080000) +#define DSPI_DIRSR_TFFFS (0x01000000) +#define DSPI_DIRSR_TFFFE (0x02000000) +#define DSPI_DIRSR_TFUFE (0x08000000) +#define DSPI_DIRSR_EOQFE (0x10000000) +#define DSPI_DIRSR_TCFE (0x80000000) + +/* Bit definitions and macros for DTFR */ +#define DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF)) +#define DSPI_DTFR_CS0 (0x00010000) +#define DSPI_DTFR_CS2 (0x00040000) +#define DSPI_DTFR_CS3 (0x00080000) +#define DSPI_DTFR_CS5 (0x00200000) +#define DSPI_DTFR_CTCNT (0x04000000) +#define DSPI_DTFR_EOQ (0x08000000) +#define DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28) +#define DSPI_DTFR_CONT (0x80000000) + +/* Bit definitions and macros for DRFR */ +#define DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF)) + +/* Bit definitions and macros for DTFDR group */ +#define DSPI_DTFDR_TXDATA(x) (((x)&0x0000FFFF)) +#define DSPI_DTFDR_TXCMD(x) (((x)&0x0000FFFF)<<16) + +/* Bit definitions and macros for DRFDR group */ +#define DSPI_DRFDR_RXDATA(x) (((x)&0x0000FFFF)) + +/********************************************************************* +* Edge Port Module (EPORT) +*********************************************************************/ + +/* Bit definitions and macros for EPPAR */ +#define EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) +#define EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) +#define EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) +#define EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) +#define EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) +#define EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) +#define EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) +#define EPORT_EPPAR_LEVEL (0) +#define EPORT_EPPAR_RISING (1) +#define EPORT_EPPAR_FALLING (2) +#define EPORT_EPPAR_BOTH (3) +#define EPORT_EPPAR_EPPA7_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA7_RISING (0x4000) +#define EPORT_EPPAR_EPPA7_FALLING (0x8000) +#define EPORT_EPPAR_EPPA7_BOTH (0xC000) +#define EPORT_EPPAR_EPPA6_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA6_RISING (0x1000) +#define EPORT_EPPAR_EPPA6_FALLING (0x2000) +#define EPORT_EPPAR_EPPA6_BOTH (0x3000) +#define EPORT_EPPAR_EPPA5_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA5_RISING (0x0400) +#define EPORT_EPPAR_EPPA5_FALLING (0x0800) +#define EPORT_EPPAR_EPPA5_BOTH (0x0C00) +#define EPORT_EPPAR_EPPA4_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA4_RISING (0x0100) +#define EPORT_EPPAR_EPPA4_FALLING (0x0200) +#define EPORT_EPPAR_EPPA4_BOTH (0x0300) +#define EPORT_EPPAR_EPPA3_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA3_RISING (0x0040) +#define EPORT_EPPAR_EPPA3_FALLING (0x0080) +#define EPORT_EPPAR_EPPA3_BOTH (0x00C0) +#define EPORT_EPPAR_EPPA2_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA2_RISING (0x0010) +#define EPORT_EPPAR_EPPA2_FALLING (0x0020) +#define EPORT_EPPAR_EPPA2_BOTH (0x0030) +#define EPORT_EPPAR_EPPA1_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA1_RISING (0x0004) +#define EPORT_EPPAR_EPPA1_FALLING (0x0008) +#define EPORT_EPPAR_EPPA1_BOTH (0x000C) + +/* Bit definitions and macros for EPDDR */ +#define EPORT_EPDDR_EPDD1 (0x02) +#define EPORT_EPDDR_EPDD2 (0x04) +#define EPORT_EPDDR_EPDD3 (0x08) +#define EPORT_EPDDR_EPDD4 (0x10) +#define EPORT_EPDDR_EPDD5 (0x20) +#define EPORT_EPDDR_EPDD6 (0x40) +#define EPORT_EPDDR_EPDD7 (0x80) + +/* Bit definitions and macros for EPIER */ +#define EPORT_EPIER_EPIE1 (0x02) +#define EPORT_EPIER_EPIE2 (0x04) +#define EPORT_EPIER_EPIE3 (0x08) +#define EPORT_EPIER_EPIE4 (0x10) +#define EPORT_EPIER_EPIE5 (0x20) +#define EPORT_EPIER_EPIE6 (0x40) +#define EPORT_EPIER_EPIE7 (0x80) + +/* Bit definitions and macros for EPDR */ +#define EPORT_EPDR_EPD1 (0x02) +#define EPORT_EPDR_EPD2 (0x04) +#define EPORT_EPDR_EPD3 (0x08) +#define EPORT_EPDR_EPD4 (0x10) +#define EPORT_EPDR_EPD5 (0x20) +#define EPORT_EPDR_EPD6 (0x40) +#define EPORT_EPDR_EPD7 (0x80) + +/* Bit definitions and macros for EPPDR */ +#define EPORT_EPPDR_EPPD1 (0x02) +#define EPORT_EPPDR_EPPD2 (0x04) +#define EPORT_EPPDR_EPPD3 (0x08) +#define EPORT_EPPDR_EPPD4 (0x10) +#define EPORT_EPPDR_EPPD5 (0x20) +#define EPORT_EPPDR_EPPD6 (0x40) +#define EPORT_EPPDR_EPPD7 (0x80) + +/* Bit definitions and macros for EPFR */ +#define EPORT_EPFR_EPF1 (0x02) +#define EPORT_EPFR_EPF2 (0x04) +#define EPORT_EPFR_EPF3 (0x08) +#define EPORT_EPFR_EPF4 (0x10) +#define EPORT_EPFR_EPF5 (0x20) +#define EPORT_EPFR_EPF6 (0x40) +#define EPORT_EPFR_EPF7 (0x80) + +/********************************************************************* +* Watchdog Timer Modules (WTM) +*********************************************************************/ + +/* Bit definitions and macros for WCR */ +#define WTM_WCR_EN (0x0001) +#define WTM_WCR_HALTED (0x0002) +#define WTM_WCR_DOZE (0x0004) +#define WTM_WCR_WAIT (0x0008) + +/********************************************************************* +* Serial Boot Facility (SBF) +*********************************************************************/ + +/* Bit definitions and macros for SBFCR */ +#define SBF_SBFCR_BLDIV(x) (((x)&0x000F)) /* Boot loader clock divider */ +#define SBF_SBFCR_FR (0x0010) /* Fast read */ + +/********************************************************************* +* Reset Controller Module (RCM) +*********************************************************************/ + +/* Bit definitions and macros for RCR */ +#define RCM_RCR_FRCRSTOUT (0x40) +#define RCM_RCR_SOFTRST (0x80) + +/* Bit definitions and macros for RSR */ +#define RCM_RSR_LOL (0x01) +#define RCM_RSR_WDR_CORE (0x02) +#define RCM_RSR_EXT (0x04) +#define RCM_RSR_POR (0x08) +#define RCM_RSR_SOFT (0x20) + +/********************************************************************* +* Chip Configuration Module (CCM) +*********************************************************************/ + +/* Bit definitions and macros for CCR_360 */ +#define CCM_CCR_360_PLLMULT2(x) (((x)&0x0003)) /* 2-Bit PLL clock mode */ +#define CCM_CCR_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ +#define CCM_CCR_360_PCIMODE (0x0008) /* PCI host/agent mode */ +#define CCM_CCR_360_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_CCR_360_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ +#define CCM_CCR_360_PLLMULT3(x) (((x)&0x0007)) /* 3-Bit PLL Clock Mode */ +#define CCM_CCR_360_OSCMODE (0x0008) /* Oscillator Clock Mode */ +#define CCM_CCR_360_FBCONFIG_MASK (0x00E0) +#define CCM_CCR_360_PLLMULT2_MASK (0x0003) +#define CCM_CCR_360_PLLMULT3_MASK (0x0007) +#define CCM_CCR_360_FBCONFIG_NM_NP_32 (0x0000) +#define CCM_CCR_360_FBCONFIG_NM_NP_8 (0x0020) +#define CCM_CCR_360_FBCONFIG_NM_NP_16 (0x0040) +#define CCM_CCR_360_FBCONFIG_M_P_16 (0x0060) +#define CCM_CCR_360_FBCONFIG_M_NP_32 (0x0080) +#define CCM_CCR_360_FBCONFIG_M_NP_8 (0x00A0) +#define CCM_CCR_360_FBCONFIG_M_NP_16 (0x00C0) +#define CCM_CCR_360_FBCONFIG_M_P_8 (0x00E0) +#define CCM_CCR_360_PLLMULT2_12X (0x0000) +#define CCM_CCR_360_PLLMULT2_6X (0x0001) +#define CCM_CCR_360_PLLMULT2_16X (0x0002) +#define CCM_CCR_360_PLLMULT2_8X (0x0003) +#define CCM_CCR_360_PLLMULT3_20X (0x0000) +#define CCM_CCR_360_PLLMULT3_10X (0x0001) +#define CCM_CCR_360_PLLMULT3_24X (0x0002) +#define CCM_CCR_360_PLLMULT3_18X (0x0003) +#define CCM_CCR_360_PLLMULT3_12X (0x0004) +#define CCM_CCR_360_PLLMULT3_6X (0x0005) +#define CCM_CCR_360_PLLMULT3_16X (0x0006) +#define CCM_CCR_360_PLLMULT3_8X (0x0007) + +/* Bit definitions and macros for CCR_256 */ +#define CCM_CCR_256_PLLMULT3(x) (((x)&0x0007)) /* 3-Bit PLL clock mode */ +#define CCM_CCR_256_OSCMODE (0x0008) /* Oscillator clock mode */ +#define CCM_CCR_256_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_CCR_256_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ +#define CCM_CCR_256_FBCONFIG_MASK (0x00E0) +#define CCM_CCR_256_FBCONFIG_NM_32 (0x0000) +#define CCM_CCR_256_FBCONFIG_NM_8 (0x0020) +#define CCM_CCR_256_FBCONFIG_NM_16 (0x0040) +#define CCM_CCR_256_FBCONFIG_M_32 (0x0080) +#define CCM_CCR_256_FBCONFIG_M_8 (0x00A0) +#define CCM_CCR_256_FBCONFIG_M_16 (0x00C0) +#define CCM_CCR_256_PLLMULT3_MASK (0x0007) +#define CCM_CCR_256_PLLMULT3_20X (0x0000) +#define CCM_CCR_256_PLLMULT3_10X (0x0001) +#define CCM_CCR_256_PLLMULT3_24X (0x0002) +#define CCM_CCR_256_PLLMULT3_18X (0x0003) +#define CCM_CCR_256_PLLMULT3_12X (0x0004) +#define CCM_CCR_256_PLLMULT3_6X (0x0005) +#define CCM_CCR_256_PLLMULT3_16X (0x0006) +#define CCM_CCR_256_PLLMULT3_8X (0x0007) + +/* Bit definitions and macros for RCON_360 */ +#define CCM_RCON_360_PLLMULT(x) (((x)&0x0003)) /* PLL clock mode */ +#define CCM_RCON_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ +#define CCM_RCON_360_PCIMODE (0x0008) /* PCI host/agent mode */ +#define CCM_RCON_360_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_RCON_360_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ + +/* Bit definitions and macros for RCON_256 */ +#define CCM_RCON_256_PLLMULT(x) (((x)&0x0007)) /* PLL clock mode */ +#define CCM_RCON_256_OSCMODE (0x0008) /* Oscillator clock mode */ +#define CCM_RCON_256_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_RCON_256_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ + +/* Bit definitions and macros for CIR */ +#define CCM_CIR_PRN(x) (((x)&0x003F)) /* Part revision number */ +#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) /* Part identification number */ +#define CCM_CIR_PIN_MASK (0xFFC0) +#define CCM_CIR_PRN_MASK (0x003F) +#define CCM_CIR_PIN_MCF54450 (0x4F<<6) +#define CCM_CIR_PIN_MCF54451 (0x4D<<6) +#define CCM_CIR_PIN_MCF54452 (0x4B<<6) +#define CCM_CIR_PIN_MCF54453 (0x49<<6) +#define CCM_CIR_PIN_MCF54454 (0x4A<<6) +#define CCM_CIR_PIN_MCF54455 (0x48<<6) + +/* Bit definitions and macros for MISCCR */ +#define CCM_MISCCR_USBSRC (0x0001) /* USB clock source */ +#define CCM_MISCCR_USBOC (0x0002) /* USB VBUS over-current sense polarity */ +#define CCM_MISCCR_USBPUE (0x0004) /* USB transceiver pull-up enable */ +#define CCM_MISCCR_SSISRC (0x0010) /* SSI clock source */ +#define CCM_MISCCR_TIMDMA (0x0020) /* Timer DMA mux selection */ +#define CCM_MISCCR_SSIPUS (0x0040) /* SSI RXD/TXD pull select */ +#define CCM_MISCCR_SSIPUE (0x0080) /* SSI RXD/TXD pull enable */ +#define CCM_MISCCR_BMT(x) (((x)&0x0007)<<8) /* Bus monitor timing field */ +#define CCM_MISCCR_BME (0x0800) /* Bus monitor external enable bit */ +#define CCM_MISCCR_LIMP (0x1000) /* Limp mode enable */ +#define CCM_MISCCR_BMT_65536 (0) +#define CCM_MISCCR_BMT_32768 (1) +#define CCM_MISCCR_BMT_16384 (2) +#define CCM_MISCCR_BMT_8192 (3) +#define CCM_MISCCR_BMT_4096 (4) +#define CCM_MISCCR_BMT_2048 (5) +#define CCM_MISCCR_BMT_1024 (6) +#define CCM_MISCCR_BMT_512 (7) +#define CCM_MISCCR_SSIPUS_UP (1) +#define CCM_MISCCR_SSIPUS_DOWN (0) +#define CCM_MISCCR_TIMDMA_TIM (1) +#define CCM_MISCCR_TIMDMA_SSI (0) +#define CCM_MISCCR_SSISRC_CLKIN (0) +#define CCM_MISCCR_SSISRC_PLL (1) +#define CCM_MISCCR_USBOC_ACTHI (0) +#define CCM_MISCCR_USBOV_ACTLO (1) +#define CCM_MISCCR_USBSRC_CLKIN (0) +#define CCM_MISCCR_USBSRC_PLL (1) + +/* Bit definitions and macros for CDR */ +#define CCM_CDR_SSIDIV(x) (((x)&0x00FF)) /* SSI oversampling clock divider */ +#define CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) /* Low power clock divider */ + +/* Bit definitions and macros for UOCSR */ +#define CCM_UOCSR_XPDE (0x0001) /* On-chip transceiver pull-down enable */ +#define CCM_UOCSR_UOMIE (0x0002) /* USB OTG misc interrupt enable */ +#define CCM_UOCSR_WKUP (0x0004) /* USB OTG controller wake-up event */ +#define CCM_UOCSR_PWRFLT (0x0008) /* VBUS power fault */ +#define CCM_UOCSR_SEND (0x0010) /* Session end */ +#define CCM_UOCSR_VVLD (0x0020) /* VBUS valid indicator */ +#define CCM_UOCSR_BVLD (0x0040) /* B-peripheral valid indicator */ +#define CCM_UOCSR_AVLD (0x0080) /* A-peripheral valid indicator */ +#define CCM_UOCSR_DPPU (0x0100) /* D+ pull-up for FS enabled (read-only) */ +#define CCM_UOCSR_DCR_VBUS (0x0200) /* VBUS discharge resistor enabled (read-only) */ +#define CCM_UOCSR_CRG_VBUS (0x0400) /* VBUS charge resistor enabled (read-only) */ +#define CCM_UOCSR_DMPD (0x1000) /* D- 15Kohm pull-down (read-only) */ +#define CCM_UOCSR_DPPD (0x2000) /* D+ 15Kohm pull-down (read-only) */ + +/********************************************************************* +* General Purpose I/O Module (GPIO) +*********************************************************************/ + +/* Bit definitions and macros for PAR_FEC */ +#define GPIO_PAR_FEC_FEC0(x) (((x)&0x07)) +#define GPIO_PAR_FEC_FEC1(x) (((x)&0x07)<<4) +#define GPIO_PAR_FEC_FEC1_MASK (0x8F) +#define GPIO_PAR_FEC_FEC1_MII (0x70) +#define GPIO_PAR_FEC_FEC1_RMII_GPIO (0x30) +#define GPIO_PAR_FEC_FEC1_RMII_ATA (0x20) +#define GPIO_PAR_FEC_FEC1_ATA (0x10) +#define GPIO_PAR_FEC_FEC1_GPIO (0x00) +#define GPIO_PAR_FEC_FEC0_MASK (0xF8) +#define GPIO_PAR_FEC_FEC0_MII (0x07) +#define GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03) +#define GPIO_PAR_FEC_FEC0_RMII_ATA (0x02) +#define GPIO_PAR_FEC_FEC0_ATA (0x01) +#define GPIO_PAR_FEC_FEC0_GPIO (0x00) + +/* Bit definitions and macros for PAR_DMA */ +#define GPIO_PAR_DMA_DREQ0 (0x01) +#define GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<2) +#define GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<4) +#define GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6) +#define GPIO_PAR_DMA_DACK1_MASK (0x3F) +#define GPIO_PAR_DMA_DACK1_DACK1 (0xC0) +#define GPIO_PAR_DMA_DACK1_ULPI_DIR (0x40) +#define GPIO_PAR_DMA_DACK1_GPIO (0x00) +#define GPIO_PAR_DMA_DREQ1_MASK (0xCF) +#define GPIO_PAR_DMA_DREQ1_DREQ1 (0x30) +#define GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10) +#define GPIO_PAR_DMA_DREQ1_GPIO (0x00) +#define GPIO_PAR_DMA_DACK0_MASK (0xF3) +#define GPIO_PAR_DMA_DACK0_DACK1 (0x0C) +#define GPIO_PAR_DMA_DACK0_ULPI_DIR (0x04) +#define GPIO_PAR_DMA_DACK0_GPIO (0x00) +#define GPIO_PAR_DMA_DREQ0_DREQ0 (0x01) +#define GPIO_PAR_DMA_DREQ0_GPIO (0x00) + +/* Bit definitions and macros for PAR_FBCTL */ +#define GPIO_PAR_FBCTL_TS(x) (((x)&0x03)<<3) +#define GPIO_PAR_FBCTL_RW (0x20) +#define GPIO_PAR_FBCTL_TA (0x40) +#define GPIO_PAR_FBCTL_OE (0x80) +#define GPIO_PAR_FBCTL_OE_OE (0x80) +#define GPIO_PAR_FBCTL_OE_GPIO (0x00) +#define GPIO_PAR_FBCTL_TA_TA (0x40) +#define GPIO_PAR_FBCTL_TA_GPIO (0x00) +#define GPIO_PAR_FBCTL_RW_RW (0x20) +#define GPIO_PAR_FBCTL_RW_GPIO (0x00) +#define GPIO_PAR_FBCTL_TS_MASK (0xE7) +#define GPIO_PAR_FBCTL_TS_TS (0x18) +#define GPIO_PAR_FBCTL_TS_ALE (0x10) +#define GPIO_PAR_FBCTL_TS_TBST (0x08) +#define GPIO_PAR_FBCTL_TS_GPIO (0x80) + +/* Bit definitions and macros for PAR_DSPI */ +#define GPIO_PAR_DSPI_SCK (0x01) +#define GPIO_PAR_DSPI_SOUT (0x02) +#define GPIO_PAR_DSPI_SIN (0x04) +#define GPIO_PAR_DSPI_PCS0 (0x08) +#define GPIO_PAR_DSPI_PCS1 (0x10) +#define GPIO_PAR_DSPI_PCS2 (0x20) +#define GPIO_PAR_DSPI_PCS5 (0x40) +#define GPIO_PAR_DSPI_PCS5_PCS5 (0x40) +#define GPIO_PAR_DSPI_PCS5_GPIO (0x00) +#define GPIO_PAR_DSPI_PCS2_PCS2 (0x20) +#define GPIO_PAR_DSPI_PCS2_GPIO (0x00) +#define GPIO_PAR_DSPI_PCS1_PCS1 (0x10) +#define GPIO_PAR_DSPI_PCS1_GPIO (0x00) +#define GPIO_PAR_DSPI_PCS0_PCS0 (0x08) +#define GPIO_PAR_DSPI_PCS0_GPIO (0x00) +#define GPIO_PAR_DSPI_SIN_SIN (0x04) +#define GPIO_PAR_DSPI_SIN_GPIO (0x00) +#define GPIO_PAR_DSPI_SOUT_SOUT (0x02) +#define GPIO_PAR_DSPI_SOUT_GPIO (0x00) +#define GPIO_PAR_DSPI_SCK_SCK (0x01) +#define GPIO_PAR_DSPI_SCK_GPIO (0x00) + +/* Bit definitions and macros for PAR_BE */ +#define GPIO_PAR_BE_BS0 (0x01) +#define GPIO_PAR_BE_BS1 (0x04) +#define GPIO_PAR_BE_BS2(x) (((x)&0x03)<<4) +#define GPIO_PAR_BE_BS3(x) (((x)&0x03)<<6) +#define GPIO_PAR_BE_BE3_MASK (0x3F) +#define GPIO_PAR_BE_BE3_BE3 (0xC0) +#define GPIO_PAR_BE_BE3_TSIZ1 (0x80) +#define GPIO_PAR_BE_BE3_GPIO (0x00) +#define GPIO_PAR_BE_BE2_MASK (0xCF) +#define GPIO_PAR_BE_BE2_BE2 (0x30) +#define GPIO_PAR_BE_BE2_TSIZ0 (0x20) +#define GPIO_PAR_BE_BE2_GPIO (0x00) +#define GPIO_PAR_BE_BE1_BE1 (0x04) +#define GPIO_PAR_BE_BE1_GPIO (0x00) +#define GPIO_PAR_BE_BE0_BE0 (0x01) +#define GPIO_PAR_BE_BE0_GPIO (0x00) + +/* Bit definitions and macros for PAR_CS */ +#define GPIO_PAR_CS_CS1 (0x02) +#define GPIO_PAR_CS_CS2 (0x04) +#define GPIO_PAR_CS_CS3 (0x08) +#define GPIO_PAR_CS_CS3_CS3 (0x08) +#define GPIO_PAR_CS_CS3_GPIO (0x00) +#define GPIO_PAR_CS_CS2_CS2 (0x04) +#define GPIO_PAR_CS_CS2_GPIO (0x00) +#define GPIO_PAR_CS_CS1_CS1 (0x02) +#define GPIO_PAR_CS_CS1_GPIO (0x00) + +/* Bit definitions and macros for PAR_TIMER */ +#define GPIO_PAR_TIMER_T0IN(x) (((x)&0x03)) +#define GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2) +#define GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4) +#define GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6) +#define GPIO_PAR_TIMER_T3IN_MASK (0x3F) +#define GPIO_PAR_TIMER_T3IN_T3IN (0xC0) +#define GPIO_PAR_TIMER_T3IN_T3OUT (0x80) +#define GPIO_PAR_TIMER_T3IN_U2RXD (0x40) +#define GPIO_PAR_TIMER_T3IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T2IN_MASK (0xCF) +#define GPIO_PAR_TIMER_T2IN_T2IN (0x30) +#define GPIO_PAR_TIMER_T2IN_T2OUT (0x20) +#define GPIO_PAR_TIMER_T2IN_U2TXD (0x10) +#define GPIO_PAR_TIMER_T2IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T1IN_MASK (0xF3) +#define GPIO_PAR_TIMER_T1IN_T1IN (0x0C) +#define GPIO_PAR_TIMER_T1IN_T1OUT (0x08) +#define GPIO_PAR_TIMER_T1IN_U2CTS (0x04) +#define GPIO_PAR_TIMER_T1IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T0IN_MASK (0xFC) +#define GPIO_PAR_TIMER_T0IN_T0IN (0x03) +#define GPIO_PAR_TIMER_T0IN_T0OUT (0x02) +#define GPIO_PAR_TIMER_T0IN_U2RTS (0x01) +#define GPIO_PAR_TIMER_T0IN_GPIO (0x00) + +/* Bit definitions and macros for PAR_USB */ +#define GPIO_PAR_USB_VBUSOC(x) (((x)&0x03)) +#define GPIO_PAR_USB_VBUSEN(x) (((x)&0x03)<<2) +#define GPIO_PAR_USB_VBUSEN_MASK (0xF3) +#define GPIO_PAR_USB_VBUSEN_VBUSEN (0x0C) +#define GPIO_PAR_USB_VBUSEN_USBPULLUP (0x08) +#define GPIO_PAR_USB_VBUSEN_ULPI_NXT (0x04) +#define GPIO_PAR_USB_VBUSEN_GPIO (0x00) +#define GPIO_PAR_USB_VBUSOC_MASK (0xFC) +#define GPIO_PAR_USB_VBUSOC_VBUSOC (0x03) +#define GPIO_PAR_USB_VBUSOC_ULPI_STP (0x01) +#define GPIO_PAR_USB_VBUSOC_GPIO (0x00) + +/* Bit definitions and macros for PAR_UART */ +#define GPIO_PAR_UART_U0TXD (0x01) +#define GPIO_PAR_UART_U0RXD (0x02) +#define GPIO_PAR_UART_U0RTS (0x04) +#define GPIO_PAR_UART_U0CTS (0x08) +#define GPIO_PAR_UART_U1TXD (0x10) +#define GPIO_PAR_UART_U1RXD (0x20) +#define GPIO_PAR_UART_U1RTS (0x40) +#define GPIO_PAR_UART_U1CTS (0x80) +#define GPIO_PAR_UART_U1CTS_U1CTS (0x80) +#define GPIO_PAR_UART_U1CTS_GPIO (0x00) +#define GPIO_PAR_UART_U1RTS_U1RTS (0x40) +#define GPIO_PAR_UART_U1RTS_GPIO (0x00) +#define GPIO_PAR_UART_U1RXD_U1RXD (0x20) +#define GPIO_PAR_UART_U1RXD_GPIO (0x00) +#define GPIO_PAR_UART_U1TXD_U1TXD (0x10) +#define GPIO_PAR_UART_U1TXD_GPIO (0x00) +#define GPIO_PAR_UART_U0CTS_U0CTS (0x08) +#define GPIO_PAR_UART_U0CTS_GPIO (0x00) +#define GPIO_PAR_UART_U0RTS_U0RTS (0x04) +#define GPIO_PAR_UART_U0RTS_GPIO (0x00) +#define GPIO_PAR_UART_U0RXD_U0RXD (0x02) +#define GPIO_PAR_UART_U0RXD_GPIO (0x00) +#define GPIO_PAR_UART_U0TXD_U0TXD (0x01) +#define GPIO_PAR_UART_U0TXD_GPIO (0x00) + +/* Bit definitions and macros for PAR_FECI2C */ +#define GPIO_PAR_FECI2C_SDA(x) (((x)&0x0003)) +#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x0003)<<2) +#define GPIO_PAR_FECI2C_MDIO0 (0x0010) +#define GPIO_PAR_FECI2C_MDC0 (0x0040) +#define GPIO_PAR_FECI2C_MDIO1(x) (((x)&0x0003)<<8) +#define GPIO_PAR_FECI2C_MDC1(x) (((x)&0x0003)<<10) +#define GPIO_PAR_FECI2C_MDC1_MASK (0xF3FF) +#define GPIO_PAR_FECI2C_MDC1_MDC1 (0x0C00) +#define GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800) +#define GPIO_PAR_FECI2C_MDC1_GPIO (0x0000) +#define GPIO_PAR_FECI2C_MDIO1_MASK (0xFCFF) +#define GPIO_PAR_FECI2C_MDIO1_MDIO1 (0x0300) +#define GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200) +#define GPIO_PAR_FECI2C_MDIO1_GPIO (0x0000) +#define GPIO_PAR_FECI2C_MDC0_MDC0 (0x0040) +#define GPIO_PAR_FECI2C_MDC0_GPIO (0x0000) +#define GPIO_PAR_FECI2C_MDIO0_MDIO0 (0x0010) +#define GPIO_PAR_FECI2C_MDIO0_GPIO (0x0000) +#define GPIO_PAR_FECI2C_SCL_MASK (0xFFF3) +#define GPIO_PAR_FECI2C_SCL_SCL (0x000C) +#define GPIO_PAR_FECI2C_SCL_U2TXD (0x0004) +#define GPIO_PAR_FECI2C_SCL_GPIO (0x0000) +#define GPIO_PAR_FECI2C_SDA_MASK (0xFFFC) +#define GPIO_PAR_FECI2C_SDA_SDA (0x0003) +#define GPIO_PAR_FECI2C_SDA_U2RXD (0x0001) +#define GPIO_PAR_FECI2C_SDA_GPIO (0x0000) + +/* Bit definitions and macros for PAR_SSI */ +#define GPIO_PAR_SSI_MCLK (0x0001) +#define GPIO_PAR_SSI_STXD(x) (((x)&0x0003)<<2) +#define GPIO_PAR_SSI_SRXD(x) (((x)&0x0003)<<4) +#define GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<6) +#define GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<8) +#define GPIO_PAR_SSI_BCLK_MASK (0xFCFF) +#define GPIO_PAR_SSI_BCLK_BCLK (0x0300) +#define GPIO_PAR_SSI_BCLK_U1CTS (0x0200) +#define GPIO_PAR_SSI_BCLK_GPIO (0x0000) +#define GPIO_PAR_SSI_FS_MASK (0xFF3F) +#define GPIO_PAR_SSI_FS_FS (0x00C0) +#define GPIO_PAR_SSI_FS_U1RTS (0x0080) +#define GPIO_PAR_SSI_FS_GPIO (0x0000) +#define GPIO_PAR_SSI_SRXD_MASK (0xFFCF) +#define GPIO_PAR_SSI_SRXD_SRXD (0x0030) +#define GPIO_PAR_SSI_SRXD_U1RXD (0x0020) +#define GPIO_PAR_SSI_SRXD_GPIO (0x0000) +#define GPIO_PAR_SSI_STXD_MASK (0xFFF3) +#define GPIO_PAR_SSI_STXD_STXD (0x000C) +#define GPIO_PAR_SSI_STXD_U1TXD (0x0008) +#define GPIO_PAR_SSI_STXD_GPIO (0x0000) +#define GPIO_PAR_SSI_MCLK_MCLK (0x0001) +#define GPIO_PAR_SSI_MCLK_GPIO (0x0000) + +/* Bit definitions and macros for PAR_ATA */ +#define GPIO_PAR_ATA_IORDY (0x0001) +#define GPIO_PAR_ATA_DMARQ (0x0002) +#define GPIO_PAR_ATA_RESET (0x0004) +#define GPIO_PAR_ATA_DA0 (0x0020) +#define GPIO_PAR_ATA_DA1 (0x0040) +#define GPIO_PAR_ATA_DA2 (0x0080) +#define GPIO_PAR_ATA_CS0 (0x0100) +#define GPIO_PAR_ATA_CS1 (0x0200) +#define GPIO_PAR_ATA_BUFEN (0x0400) +#define GPIO_PAR_ATA_BUFEN_BUFEN (0x0400) +#define GPIO_PAR_ATA_BUFEN_GPIO (0x0000) +#define GPIO_PAR_ATA_CS1_CS1 (0x0200) +#define GPIO_PAR_ATA_CS1_GPIO (0x0000) +#define GPIO_PAR_ATA_CS0_CS0 (0x0100) +#define GPIO_PAR_ATA_CS0_GPIO (0x0000) +#define GPIO_PAR_ATA_DA2_DA2 (0x0080) +#define GPIO_PAR_ATA_DA2_GPIO (0x0000) +#define GPIO_PAR_ATA_DA1_DA1 (0x0040) +#define GPIO_PAR_ATA_DA1_GPIO (0x0000) +#define GPIO_PAR_ATA_DA0_DA0 (0x0020) +#define GPIO_PAR_ATA_DA0_GPIO (0x0000) +#define GPIO_PAR_ATA_RESET_RESET (0x0004) +#define GPIO_PAR_ATA_RESET_GPIO (0x0000) +#define GPIO_PAR_ATA_DMARQ_DMARQ (0x0002) +#define GPIO_PAR_ATA_DMARQ_GPIO (0x0000) +#define GPIO_PAR_ATA_IORDY_IORDY (0x0001) +#define GPIO_PAR_ATA_IORDY_GPIO (0x0000) + +/* Bit definitions and macros for PAR_IRQ */ +#define GPIO_PAR_IRQ_IRQ1 (0x02) +#define GPIO_PAR_IRQ_IRQ4 (0x10) +#define GPIO_PAR_IRQ_IRQ4_IRQ4 (0x10) +#define GPIO_PAR_IRQ_IRQ4_GPIO (0x00) +#define GPIO_PAR_IRQ_IRQ1_IRQ1 (0x02) +#define GPIO_PAR_IRQ_IRQ1_GPIO (0x00) + +/* Bit definitions and macros for PAR_PCI */ +#define GPIO_PAR_PCI_REQ0 (0x0001) +#define GPIO_PAR_PCI_REQ1 (0x0004) +#define GPIO_PAR_PCI_REQ2 (0x0010) +#define GPIO_PAR_PCI_REQ3(x) (((x)&0x0003)<<6) +#define GPIO_PAR_PCI_GNT0 (0x0100) +#define GPIO_PAR_PCI_GNT1 (0x0400) +#define GPIO_PAR_PCI_GNT2 (0x1000) +#define GPIO_PAR_PCI_GNT3(x) (((x)&0x0003)<<14) +#define GPIO_PAR_PCI_GNT3_MASK (0x3FFF) +#define GPIO_PAR_PCI_GNT3_GNT3 (0xC000) +#define GPIO_PAR_PCI_GNT3_ATA_DMACK (0x8000) +#define GPIO_PAR_PCI_GNT3_GPIO (0x0000) +#define GPIO_PAR_PCI_GNT2_GNT2 (0x1000) +#define GPIO_PAR_PCI_GNT2_GPIO (0x0000) +#define GPIO_PAR_PCI_GNT1_GNT1 (0x0400) +#define GPIO_PAR_PCI_GNT1_GPIO (0x0000) +#define GPIO_PAR_PCI_GNT0_GNT0 (0x0100) +#define GPIO_PAR_PCI_GNT0_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ3_MASK (0xFF3F) +#define GPIO_PAR_PCI_REQ3_REQ3 (0x00C0) +#define GPIO_PAR_PCI_REQ3_ATA_INTRQ (0x0080) +#define GPIO_PAR_PCI_REQ3_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ2_REQ2 (0x0010) +#define GPIO_PAR_PCI_REQ2_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ1_REQ1 (0x0040) +#define GPIO_PAR_PCI_REQ1_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ0_REQ0 (0x0001) +#define GPIO_PAR_PCI_REQ0_GPIO (0x0000) + +/* Bit definitions and macros for MSCR_SDRAM */ +#define GPIO_MSCR_SDRAM_SDCTL(x) (((x)&0x03)) +#define GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) +#define GPIO_MSCR_SDRAM_SDDQS(x) (((x)&0x03)<<4) +#define GPIO_MSCR_SDRAM_SDDATA(x) (((x)&0x03)<<6) +#define GPIO_MSCR_SDRAM_SDDATA_MASK (0x3F) +#define GPIO_MSCR_SDRAM_SDDATA_DDR1 (0xC0) +#define GPIO_MSCR_SDRAM_SDDATA_DDR2 (0x80) +#define GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR (0x40) +#define GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR (0x00) +#define GPIO_MSCR_SDRAM_SDDQS_MASK (0xCF) +#define GPIO_MSCR_SDRAM_SDDQS_DDR1 (0x30) +#define GPIO_MSCR_SDRAM_SDDQS_DDR2 (0x20) +#define GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR (0x10) +#define GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR (0x00) +#define GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3) +#define GPIO_MSCR_SDRAM_SDCLK_DDR1 (0x0C) +#define GPIO_MSCR_SDRAM_SDCLK_DDR2 (0x08) +#define GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR (0x04) +#define GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR (0x00) +#define GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC) +#define GPIO_MSCR_SDRAM_SDCTL_DDR1 (0x03) +#define GPIO_MSCR_SDRAM_SDCTL_DDR2 (0x02) +#define GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR (0x01) +#define GPIO_MSCR_SDRAM_SDCTL_HS_LPDDR (0x00) + +/* Bit definitions and macros for MSCR_PCI */ +#define GPIO_MSCR_PCI_PCI (0x01) +#define GPIO_MSCR_PCI_PCI_HI_66MHZ (0x01) +#define GPIO_MSCR_PCI_PCI_LO_33MHZ (0x00) + +/* Bit definitions and macros for DSCR_I2C */ +#define GPIO_DSCR_I2C_I2C(x) (((x)&0x03)) +#define GPIO_DSCR_I2C_I2C_LOAD_50PF (0x03) +#define GPIO_DSCR_I2C_I2C_LOAD_30PF (0x02) +#define GPIO_DSCR_I2C_I2C_LOAD_20PF (0x01) +#define GPIO_DSCR_I2C_I2C_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_FLEXBUS */ +#define GPIO_DSCR_FLEXBUS_FBADL(x) (((x)&0x03)) +#define GPIO_DSCR_FLEXBUS_FBADH(x) (((x)&0x03)<<2) +#define GPIO_DSCR_FLEXBUS_FBCTL(x) (((x)&0x03)<<4) +#define GPIO_DSCR_FLEXBUS_FBCLK(x) (((x)&0x03)<<6) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_50PF (0xC0) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_30PF (0x80) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_20PF (0x40) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_10PF (0x00) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_50PF (0x30) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_30PF (0x20) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_20PF (0x10) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_10PF (0x00) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_50PF (0x0C) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_30PF (0x08) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_20PF (0x04) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_10PF (0x00) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_50PF (0x03) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_30PF (0x02) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_20PF (0x01) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_FEC */ +#define GPIO_DSCR_FEC_FEC0(x) (((x)&0x03)) +#define GPIO_DSCR_FEC_FEC1(x) (((x)&0x03)<<2) +#define GPIO_DSCR_FEC_FEC1_LOAD_50PF (0x0C) +#define GPIO_DSCR_FEC_FEC1_LOAD_30PF (0x08) +#define GPIO_DSCR_FEC_FEC1_LOAD_20PF (0x04) +#define GPIO_DSCR_FEC_FEC1_LOAD_10PF (0x00) +#define GPIO_DSCR_FEC_FEC0_LOAD_50PF (0x03) +#define GPIO_DSCR_FEC_FEC0_LOAD_30PF (0x02) +#define GPIO_DSCR_FEC_FEC0_LOAD_20PF (0x01) +#define GPIO_DSCR_FEC_FEC0_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_UART */ +#define GPIO_DSCR_UART_UART0(x) (((x)&0x03)) +#define GPIO_DSCR_UART_UART1(x) (((x)&0x03)<<2) +#define GPIO_DSCR_UART_UART1_LOAD_50PF (0x0C) +#define GPIO_DSCR_UART_UART1_LOAD_30PF (0x08) +#define GPIO_DSCR_UART_UART1_LOAD_20PF (0x04) +#define GPIO_DSCR_UART_UART1_LOAD_10PF (0x00) +#define GPIO_DSCR_UART_UART0_LOAD_50PF (0x03) +#define GPIO_DSCR_UART_UART0_LOAD_30PF (0x02) +#define GPIO_DSCR_UART_UART0_LOAD_20PF (0x01) +#define GPIO_DSCR_UART_UART0_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_DSPI */ +#define GPIO_DSCR_DSPI_DSPI(x) (((x)&0x03)) +#define GPIO_DSCR_DSPI_DSPI_LOAD_50PF (0x03) +#define GPIO_DSCR_DSPI_DSPI_LOAD_30PF (0x02) +#define GPIO_DSCR_DSPI_DSPI_LOAD_20PF (0x01) +#define GPIO_DSCR_DSPI_DSPI_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_TIMER */ +#define GPIO_DSCR_TIMER_TIMER(x) (((x)&0x03)) +#define GPIO_DSCR_TIMER_TIMER_LOAD_50PF (0x03) +#define GPIO_DSCR_TIMER_TIMER_LOAD_30PF (0x02) +#define GPIO_DSCR_TIMER_TIMER_LOAD_20PF (0x01) +#define GPIO_DSCR_TIMER_TIMER_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_SSI */ +#define GPIO_DSCR_SSI_SSI(x) (((x)&0x03)) +#define GPIO_DSCR_SSI_SSI_LOAD_50PF (0x03) +#define GPIO_DSCR_SSI_SSI_LOAD_30PF (0x02) +#define GPIO_DSCR_SSI_SSI_LOAD_20PF (0x01) +#define GPIO_DSCR_SSI_SSI_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_DMA */ +#define GPIO_DSCR_DMA_DMA(x) (((x)&0x03)) +#define GPIO_DSCR_DMA_DMA_LOAD_50PF (0x03) +#define GPIO_DSCR_DMA_DMA_LOAD_30PF (0x02) +#define GPIO_DSCR_DMA_DMA_LOAD_20PF (0x01) +#define GPIO_DSCR_DMA_DMA_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_DEBUG */ +#define GPIO_DSCR_DEBUG_DEBUG(x) (((x)&0x03)) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_50PF (0x03) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_30PF (0x02) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_20PF (0x01) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_RESET */ +#define GPIO_DSCR_RESET_RESET(x) (((x)&0x03)) +#define GPIO_DSCR_RESET_RESET_LOAD_50PF (0x03) +#define GPIO_DSCR_RESET_RESET_LOAD_30PF (0x02) +#define GPIO_DSCR_RESET_RESET_LOAD_20PF (0x01) +#define GPIO_DSCR_RESET_RESET_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_IRQ */ +#define GPIO_DSCR_IRQ_IRQ(x) (((x)&0x03)) +#define GPIO_DSCR_IRQ_IRQ_LOAD_50PF (0x03) +#define GPIO_DSCR_IRQ_IRQ_LOAD_30PF (0x02) +#define GPIO_DSCR_IRQ_IRQ_LOAD_20PF (0x01) +#define GPIO_DSCR_IRQ_IRQ_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_USB */ +#define GPIO_DSCR_USB_USB(x) (((x)&0x03)) +#define GPIO_DSCR_USB_USB_LOAD_50PF (0x03) +#define GPIO_DSCR_USB_USB_LOAD_30PF (0x02) +#define GPIO_DSCR_USB_USB_LOAD_20PF (0x01) +#define GPIO_DSCR_USB_USB_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_ATA */ +#define GPIO_DSCR_ATA_ATA(x) (((x)&0x03)) +#define GPIO_DSCR_ATA_ATA_LOAD_50PF (0x03) +#define GPIO_DSCR_ATA_ATA_LOAD_30PF (0x02) +#define GPIO_DSCR_ATA_ATA_LOAD_20PF (0x01) +#define GPIO_DSCR_ATA_ATA_LOAD_10PF (0x00) + +/********************************************************************* +* Random Number Generator (RNG) +*********************************************************************/ + +/* Bit definitions and macros for RNGCR */ +#define RNG_RNGCR_GO (0x00000001) +#define RNG_RNGCR_HA (0x00000002) +#define RNG_RNGCR_IM (0x00000004) +#define RNG_RNGCR_CI (0x00000008) + +/* Bit definitions and macros for RNGSR */ +#define RNG_RNGSR_SV (0x00000001) +#define RNG_RNGSR_LRS (0x00000002) +#define RNG_RNGSR_FUF (0x00000004) +#define RNG_RNGSR_EI (0x00000008) +#define RNG_RNGSR_OFL(x) (((x)&0x000000FF)<<8) +#define RNG_RNGSR_OFS(x) (((x)&0x000000FF)<<16) + +/********************************************************************* +* SDRAM Controller (SDRAMC) +*********************************************************************/ + +/* Bit definitions and macros for SDMR */ +#define SDRAMC_SDMR_DDR2_AD(x) (((x)&0x00003FFF)) /* Address for DDR2 */ +#define SDRAMC_SDMR_CMD (0x00010000) /* Command */ +#define SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) /* Address */ +#define SDRAMC_SDMR_BK(x) (((x)&0x00000003)<<30) /* Bank Address */ +#define SDRAMC_SDMR_BK_LMR (0x00000000) +#define SDRAMC_SDMR_BK_LEMR (0x40000000) + +/* Bit definitions and macros for SDCR */ +#define SDRAMC_SDCR_DPD (0x00000001) /* Deep Power-Down Mode */ +#define SDRAMC_SDCR_IPALL (0x00000002) /* Initiate Precharge All */ +#define SDRAMC_SDCR_IREF (0x00000004) /* Initiate Refresh */ +#define SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) /* DQS Output Enable */ +#define SDRAMC_SDCR_MEM_PS (0x00002000) /* Data Port Size */ +#define SDRAMC_SDCR_REF_CNT(x) (((x)&0x0000003F)<<16) /* Periodic Refresh Counter */ +#define SDRAMC_SDCR_OE_RULE (0x00400000) /* Drive Rule Selection */ +#define SDRAMC_SDCR_ADDR_MUX(x) (((x)&0x00000003)<<24) /* Internal Address Mux Select */ +#define SDRAMC_SDCR_DDR2_MODE (0x08000000) /* DDR2 Mode Select */ +#define SDRAMC_SDCR_REF_EN (0x10000000) /* Refresh Enable */ +#define SDRAMC_SDCR_DDR_MODE (0x20000000) /* DDR Mode Select */ +#define SDRAMC_SDCR_CKE (0x40000000) /* Clock Enable */ +#define SDRAMC_SDCR_MODE_EN (0x80000000) /* SDRAM Mode Register Programming Enable */ +#define SDRAMC_SDCR_DQS_OE_BOTH (0x00000C000) + +/* Bit definitions and macros for SDCFG1 */ +#define SDRAMC_SDCFG1_WT_LAT(x) (((x)&0x00000007)<<4) /* Write Latency */ +#define SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) /* Refresh to active delay */ +#define SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) /* Precharge to active delay */ +#define SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) /* Active to read/write delay */ +#define SDRAMC_SDCFG1_RD_LAT(x) (((x)&0x0000000F)<<20) /* Read CAS Latency */ +#define SDRAMC_SDCFG1_SWT2RWP(x) (((x)&0x00000007)<<24) /* Single write to read/write/precharge delay */ +#define SDRAMC_SDCFG1_SRD2RWP(x) (((x)&0x0000000F)<<28) /* Single read to read/write/precharge delay */ + +/* Bit definitions and macros for SDCFG2 */ +#define SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) /* Burst Length */ +#define SDRAMC_SDCFG2_BRD2W(x) (((x)&0x0000000F)<<20) /* Burst read to write delay */ +#define SDRAMC_SDCFG2_BWT2RWP(x) (((x)&0x0000000F)<<24) /* Burst write to read/write/precharge delay */ +#define SDRAMC_SDCFG2_BRD2RP(x) (((x)&0x0000000F)<<28) /* Burst read to read/precharge delay */ + +/* Bit definitions and macros for SDCS group */ +#define SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */ +#define SDRAMC_SDCS_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */ +#define SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) +#define SDRAMC_SDCS_CSSZ_DISABLE (0x00000000) +#define SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) +#define SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) +#define SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) +#define SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) +#define SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) +#define SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) +#define SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) +#define SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) +#define SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) +#define SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) +#define SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) +#define SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) +#define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) + +/********************************************************************* +* Synchronous Serial Interface (SSI) +*********************************************************************/ + +/* Bit definitions and macros for CR */ +#define SSI_CR_SSI_EN (0x00000001) +#define SSI_CR_TE (0x00000002) +#define SSI_CR_RE (0x00000004) +#define SSI_CR_NET (0x00000008) +#define SSI_CR_SYN (0x00000010) +#define SSI_CR_I2S(x) (((x)&0x00000003)<<5) +#define SSI_CR_MCE (0x00000080) +#define SSI_CR_TCH (0x00000100) +#define SSI_CR_CIS (0x00000200) +#define SSI_CR_I2S_NORMAL (0x00000000) +#define SSI_CR_I2S_MASTER (0x00000020) +#define SSI_CR_I2S_SLAVE (0x00000040) + +/* Bit definitions and macros for ISR */ +#define SSI_ISR_TFE0 (0x00000001) +#define SSI_ISR_TFE1 (0x00000002) +#define SSI_ISR_RFF0 (0x00000004) +#define SSI_ISR_RFF1 (0x00000008) +#define SSI_ISR_RLS (0x00000010) +#define SSI_ISR_TLS (0x00000020) +#define SSI_ISR_RFS (0x00000040) +#define SSI_ISR_TFS (0x00000080) +#define SSI_ISR_TUE0 (0x00000100) +#define SSI_ISR_TUE1 (0x00000200) +#define SSI_ISR_ROE0 (0x00000400) +#define SSI_ISR_ROE1 (0x00000800) +#define SSI_ISR_TDE0 (0x00001000) +#define SSI_ISR_TDE1 (0x00002000) +#define SSI_ISR_RDR0 (0x00004000) +#define SSI_ISR_RDR1 (0x00008000) +#define SSI_ISR_RXT (0x00010000) +#define SSI_ISR_CMDDU (0x00020000) +#define SSI_ISR_CMDAU (0x00040000) + +/* Bit definitions and macros for IER */ +#define SSI_IER_TFE0 (0x00000001) +#define SSI_IER_TFE1 (0x00000002) +#define SSI_IER_RFF0 (0x00000004) +#define SSI_IER_RFF1 (0x00000008) +#define SSI_IER_RLS (0x00000010) +#define SSI_IER_TLS (0x00000020) +#define SSI_IER_RFS (0x00000040) +#define SSI_IER_TFS (0x00000080) +#define SSI_IER_TUE0 (0x00000100) +#define SSI_IER_TUE1 (0x00000200) +#define SSI_IER_ROE0 (0x00000400) +#define SSI_IER_ROE1 (0x00000800) +#define SSI_IER_TDE0 (0x00001000) +#define SSI_IER_TDE1 (0x00002000) +#define SSI_IER_RDR0 (0x00004000) +#define SSI_IER_RDR1 (0x00008000) +#define SSI_IER_RXT (0x00010000) +#define SSI_IER_CMDU (0x00020000) +#define SSI_IER_CMDAU (0x00040000) +#define SSI_IER_TIE (0x00080000) +#define SSI_IER_TDMAE (0x00100000) +#define SSI_IER_RIE (0x00200000) +#define SSI_IER_RDMAE (0x00400000) + +/* Bit definitions and macros for TCR */ +#define SSI_TCR_TEFS (0x00000001) +#define SSI_TCR_TFSL (0x00000002) +#define SSI_TCR_TFSI (0x00000004) +#define SSI_TCR_TSCKP (0x00000008) +#define SSI_TCR_TSHFD (0x00000010) +#define SSI_TCR_TXDIR (0x00000020) +#define SSI_TCR_TFDIR (0x00000040) +#define SSI_TCR_TFEN0 (0x00000080) +#define SSI_TCR_TFEN1 (0x00000100) +#define SSI_TCR_TXBIT0 (0x00000200) + +/* Bit definitions and macros for RCR */ +#define SSI_RCR_REFS (0x00000001) +#define SSI_RCR_RFSL (0x00000002) +#define SSI_RCR_RFSI (0x00000004) +#define SSI_RCR_RSCKP (0x00000008) +#define SSI_RCR_RSHFD (0x00000010) +#define SSI_RCR_RFEN0 (0x00000080) +#define SSI_RCR_RFEN1 (0x00000100) +#define SSI_RCR_RXBIT0 (0x00000200) +#define SSI_RCR_RXEXT (0x00000400) + +/* Bit definitions and macros for CCR */ +#define SSI_CCR_PM(x) (((x)&0x000000FF)) +#define SSI_CCR_DC(x) (((x)&0x0000001F)<<8) +#define SSI_CCR_WL(x) (((x)&0x0000000F)<<13) +#define SSI_CCR_PSR (0x00020000) +#define SSI_CCR_DIV2 (0x00040000) + +/* Bit definitions and macros for FCSR */ +#define SSI_FCSR_TFWM0(x) (((x)&0x0000000F)) +#define SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4) +#define SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8) +#define SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12) +#define SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16) +#define SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20) +#define SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24) +#define SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28) + +/* Bit definitions and macros for ACR */ +#define SSI_ACR_AC97EN (0x00000001) +#define SSI_ACR_FV (0x00000002) +#define SSI_ACR_TIF (0x00000004) +#define SSI_ACR_RD (0x00000008) +#define SSI_ACR_WR (0x00000010) +#define SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5) + +/* Bit definitions and macros for ACADD */ +#define SSI_ACADD_SSI_ACADD(x) (((x)&0x0007FFFF)) + +/* Bit definitions and macros for ACDAT */ +#define SSI_ACDAT_SSI_ACDAT(x) (((x)&0x0007FFFF)) + +/* Bit definitions and macros for ATAG */ +#define SSI_ATAG_DDI_ATAG(x) (((x)&0x0000FFFF)) + +/********************************************************************* +* Phase Locked Loop (PLL) +*********************************************************************/ + +/* Bit definitions and macros for PCR */ +#define PLL_PCR_OUTDIV1(x) (((x)&0x0000000F)) /* Output divider for CPU clock frequency */ +#define PLL_PCR_OUTDIV2(x) (((x)&0x0000000F)<<4) /* Output divider for internal bus clock frequency */ +#define PLL_PCR_OUTDIV3(x) (((x)&0x0000000F)<<8) /* Output divider for Flexbus clock frequency */ +#define PLL_PCR_OUTDIV4(x) (((x)&0x0000000F)<<12) /* Output divider for PCI clock frequency */ +#define PLL_PCR_OUTDIV5(x) (((x)&0x0000000F)<<16) /* Output divider for USB clock frequency */ +#define PLL_PCR_PFDR(x) (((x)&0x000000FF)<<24) /* Feedback divider for VCO frequency */ +#define PLL_PCR_PFDR_MASK (0x000F0000) +#define PLL_PCR_OUTDIV5_MASK (0x000F0000) +#define PLL_PCR_OUTDIV4_MASK (0x0000F000) +#define PLL_PCR_OUTDIV3_MASK (0x00000F00) +#define PLL_PCR_OUTDIV2_MASK (0x000000F0) +#define PLL_PCR_OUTDIV1_MASK (0x0000000F) + +/* Bit definitions and macros for PSR */ +#define PLL_PSR_LOCKS (0x00000001) /* PLL lost lock - sticky */ +#define PLL_PSR_LOCK (0x00000002) /* PLL lock status */ +#define PLL_PSR_LOLIRQ (0x00000004) /* PLL loss-of-lock interrupt enable */ +#define PLL_PSR_LOLRE (0x00000008) /* PLL loss-of-lock reset enable */ + +/********************************************************************* +* PCI +*********************************************************************/ + +/* Bit definitions and macros for SCR */ +#define PCI_SCR_PE (0x80000000) /* Parity Error detected */ +#define PCI_SCR_SE (0x40000000) /* System error signalled */ +#define PCI_SCR_MA (0x20000000) /* Master aboart received */ +#define PCI_SCR_TR (0x10000000) /* Target abort received */ +#define PCI_SCR_TS (0x08000000) /* Target abort signalled */ +#define PCI_SCR_DT (0x06000000) /* PCI_DEVSEL timing */ +#define PCI_SCR_DP (0x01000000) /* Master data parity err */ +#define PCI_SCR_FC (0x00800000) /* Fast back-to-back */ +#define PCI_SCR_R (0x00400000) /* Reserved */ +#define PCI_SCR_66M (0x00200000) /* 66Mhz */ +#define PCI_SCR_C (0x00100000) /* Capabilities list */ +#define PCI_SCR_F (0x00000200) /* Fast back-to-back enable */ +#define PCI_SCR_S (0x00000100) /* SERR enable */ +#define PCI_SCR_ST (0x00000080) /* Addr and Data stepping */ +#define PCI_SCR_PER (0x00000040) /* Parity error response */ +#define PCI_SCR_V (0x00000020) /* VGA palette snoop enable */ +#define PCI_SCR_MW (0x00000010) /* Memory write and invalidate enable */ +#define PCI_SCR_SP (0x00000008) /* Special cycle monitor or ignore */ +#define PCI_SCR_B (0x00000004) /* Bus master enable */ +#define PCI_SCR_M (0x00000002) /* Memory access control */ +#define PCI_SCR_IO (0x00000001) /* I/O access control */ + +#define PCI_CR1_BIST(x) ((x & 0xFF) << 24) /* Built in self test */ +#define PCI_CR1_HDR(x) ((x & 0xFF) << 16) /* Header type */ +#define PCI_CR1_LTMR(x) ((x & 0xF8) << 8) /* Latency timer */ +#define PCI_CR1_CLS(x) (x & 0x0F) /* Cache line size */ + +#define PCI_BAR_BAR0(x) (x & 0xFFFC0000) +#define PCI_BAR_BAR1(x) (x & 0xFFF00000) +#define PCI_BAR_BAR2(x) (x & 0xFFC00000) +#define PCI_BAR_BAR3(x) (x & 0xFF000000) +#define PCI_BAR_BAR4(x) (x & 0xF8000000) +#define PCI_BAR_BAR5(x) (x & 0xE0000000) +#define PCI_BAR_PREF (0x00000004) /* Prefetchable access */ +#define PCI_BAR_RANGE (0x00000002) /* Fixed to 00 */ +#define PCI_BAR_IO_M (0x00000001) /* IO / memory space */ + +#define PCI_CR2_MAXLAT(x) ((x & 0xFF) << 24) /* Maximum latency */ +#define PCI_CR2_MINGNT(x) ((x & 0xFF) << 16) /* Minimum grant */ +#define PCI_CR2_INTPIN(x) ((x & 0xFF) << 8) /* Interrupt Pin */ +#define PCI_CR2_INTLIN(x) (x & 0xFF) /* Interrupt Line */ + +#define PCI_GSCR_DRD (0x80000000) /* Delayed read discarded */ +#define PCI_GSCR_PE (0x20000000) /* PCI_PERR detected */ +#define PCI_GSCR_SE (0x10000000) /* SERR detected */ +#define PCI_GSCR_ER (0x08000000) /* Error response detected */ +#define PCI_GSCR_DRDE (0x00008000) /* Delayed read discarded enable */ +#define PCI_GSCR_PEE (0x00002000) /* PERR detected interrupt enable */ +#define PCI_GSCR_SEE (0x00001000) /* SERR detected interrupt enable */ +#define PCI_GSCR_PR (0x00000001) /* PCI reset */ + +#define PCI_TCR1_LD (0x01000000) /* Latency rule disable */ +#define PCI_TCR1_PID (0x00020000) /* Prefetch invalidate and disable */ +#define PCI_TCR1_P (0x00010000) /* Prefetch reads */ +#define PCI_TCR1_WCD (0x00000100) /* Write combine disable */ + +#define PCI_TCR1_B5E (0x00002000) /* */ +#define PCI_TCR1_B4E (0x00001000) /* */ +#define PCI_TCR1_B3E (0x00000800) /* */ +#define PCI_TCR1_B2E (0x00000400) /* */ +#define PCI_TCR1_B1E (0x00000200) /* */ +#define PCI_TCR1_B0E (0x00000100) /* */ +#define PCI_TCR1_CR (0x00000001) /* */ + +#define PCI_TBATR_BAT(x) ((x & 0xFFF) << 20) +#define PCI_TBATR_EN (0x00000001) /* Enable */ + +#define PCI_IWCR_W0C_IO (0x08000000) /* Windows Maps to PCI I/O */ +#define PCI_IWCR_W0C_PRC_RDMUL (0x04000000) /* PCI Memory Read multiple */ +#define PCI_IWCR_W0C_PRC_RDLN (0x02000000) /* PCI Memory Read line */ +#define PCI_IWCR_W0C_PRC_RD (0x00000000) /* PCI Memory Read */ +#define PCI_IWCR_W0C_EN (0x01000000) /* Enable - Register initialize */ +#define PCI_IWCR_W1C_IO (0x00080000) /* Windows Maps to PCI I/O */ +#define PCI_IWCR_W1C_PRC_RDMUL (0x00040000) /* PCI Memory Read multiple */ +#define PCI_IWCR_W1C_PRC_RDLN (0x00020000) /* PCI Memory Read line */ +#define PCI_IWCR_W1C_PRC_RD (0x00000000) /* PCI Memory Read */ +#define PCI_IWCR_W1C_EN (0x00010000) /* Enable - Register initialize */ +#define PCI_IWCR_W2C_IO (0x00000800) /* Windows Maps to PCI I/O */ +#define PCI_IWCR_W2C_PRC_RDMUL (0x00000400) /* PCI Memory Read multiple */ +#define PCI_IWCR_W2C_PRC_RDLN (0x00000200) /* PCI Memory Read line */ +#define PCI_IWCR_W2C_PRC_RD (0x00000000) /* PCI Memory Read */ +#define PCI_IWCR_W2C_EN (0x00000100) /* Enable - Register initialize */ + +#define PCI_ICR_REE (0x04000000) /* Retry error enable */ +#define PCI_ICR_IAE (0x02000000) /* Initiator abort enable */ +#define PCI_ICR_TAE (0x01000000) /* Target abort enable */ + +#define PCI_IDR_DEVID ( + +/********************************************************************/ + +#endif /* __MCF5445X__ */ diff --git a/include/asm-m68k/rtc.h b/include/asm-m68k/rtc.h index f955bc5..7651ca9 100644 --- a/include/asm-m68k/rtc.h +++ b/include/asm-m68k/rtc.h @@ -35,9 +35,10 @@ typedef struct rtc_ctrl { u32 cr; /* 0x10 Control Register */ u32 isr; /* 0x14 Interrupt Status Register */ u32 ier; /* 0x18 Interrupt Enable Register */ - u32 stpwach; /* 0x1C Stopwatch Minutes Register */ + u32 stpwatch; /* 0x1C Stopwatch Minutes Register */ u32 days; /* 0x20 Days Counter Register */ u32 alrm_day; /* 0x24 Days Alarm Register */ + void *extended; } rtc_t; /* Bit definitions and macros for HOURMIN */ diff --git a/include/asm-m68k/u-boot.h b/include/asm-m68k/u-boot.h index 70dbda4..93a6959 100644 --- a/include/asm-m68k/u-boot.h +++ b/include/asm-m68k/u-boot.h @@ -52,6 +52,14 @@ typedef struct bd_info { unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ +#ifdef CONFIG_PCI + unsigned long bi_pcifreq; /* pci Freq in MHz */ +#endif +#ifdef CONFIG_EXTRA_CLOCK + unsigned long bi_inpfreq; /* input Freq in MHz */ + unsigned long bi_vcofreq; /* vco Freq in MHz */ + unsigned long bi_flbfreq; /* Flexbus Freq in MHz */ +#endif unsigned long bi_baudrate; /* Console Baudrate */ #ifdef CONFIG_HAS_ETH1 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h new file mode 100644 index 0000000..6f4859c --- /dev/null +++ b/include/configs/M54455EVB.h @@ -0,0 +1,391 @@ +/* + * Configuation settings for the Freescale MCF54455 EVB board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _JAMICA54455_H +#define _JAMICA54455_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF5445x /* define processor family */ +#define CONFIG_M54455 /* define processor type */ +#define CONFIG_M54455EVB /* M54455EVB board */ + +#undef DEBUG + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration */ +#include + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +/* Network configuration */ +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CONFIG_CF_DOMII +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC1_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +# define CONFIG_HAS_ETH1 + +# define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 +# define CONFIG_ETHPRIME "FEC0" +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE + +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#define CONFIG_HOSTNAME M54455EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off 0 2ffff;" \ + "era 0 2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" + +/* ATA configuration */ +#define CONFIG_ISO_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_IDE_RESET 1 +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_ATAPI +#undef CONFIG_LBA48 + +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 2 + +#define CFG_ATA_BASE_ADDR 0x90000000 +#define CFG_ATA_IDE0_OFFSET 0 + +#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 4 /* Interval between registers */ +#define _IO_BASE 0 + +/* Realtime clock */ +#define CONFIG_MCFRTC +#undef RTC_DEBUG +#define CFG_RTC_OSCILLATOR (32 * CFG_HZ) + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2c */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x58000 +#define CFG_IMMR CFG_MBAR + +/* PCI */ +#define CONFIG_PCI 1 + +#define CFG_PCI_MEM_BUS 0xA0000000 +#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS +#define CFG_PCI_MEM_SIZE 0x10000000 + +#define CFG_PCI_IO_BUS 0xB1000000 +#define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS +#define CFG_PCI_IO_SIZE 0x01000000 + +#define CFG_PCI_CFG_BUS 0xB0000000 +#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS +#define CFG_PCI_CFG_SIZE 0x01000000 + +/* FPGA - Spartan 2 */ +/* experiment +#define CONFIG_FPGA CFG_SPARTAN3 +#define CONFIG_FPGA_COUNT 1 +#define CFG_FPGA_PROG_FEEDBACK +#define CFG_FPGA_CHECK_CTRLC +*/ + +/* Input, PCI, Flexbus, and VCO */ +#define CONFIG_EXTRA_CLOCK + +#define CONFIG_PRAM 512 /* 512 KB */ + +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000) + +#define CFG_HZ 1000 + +#define CFG_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x80000000 +#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x221 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 16) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x40000000 +#define CFG_SDRAM_BASE1 0x48000000 +#define CFG_SDRAM_SIZE 256 /* SDRAM size in MB */ +#define CFG_SDRAM_CFG1 0x65311610 +#define CFG_SDRAM_CFG2 0x59670000 +#define CFG_SDRAM_CTRL 0xEA0B2000 +#define CFG_SDRAM_EMOD 0x40010000 +#define CFG_SDRAM_MODE 0x00010033 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +/* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OVERWRITE 1 +#undef CFG_ENV_IS_EMBEDDED + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#ifdef CFG_ATMEL_BOOT +# define CFG_FLASH_BASE 0 +# define CFG_FLASH0_BASE CFG_CS0_BASE +# define CFG_FLASH1_BASE CFG_CS1_BASE +#else +# define CFG_FLASH_BASE CFG_FLASH0_BASE +# define CFG_FLASH0_BASE CFG_CS1_BASE +# define CFG_FLASH1_BASE CFG_CS0_BASE +#endif + +/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system +/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system + keep reset. */ +#undef CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI + +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT +# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM +# define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE } + +#else + +# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ + +# define CFG_ATMEL_REGION 4 +# define CFG_ATMEL_TOTALSECT 11 +# define CFG_ATMEL_SECT {1, 2, 1, 7} +# define CFG_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} +# define CFG_INTEL_SECT 137 + +/* max number of sectors on one chip */ +# define CFG_MAX_FLASH_SECT (CFG_ATMEL_TOTALSECT + CFG_INTEL_SECT) +# define CFG_FLASH_ERASE_TOUT 2000 /* Atmel needs longer timeout */ +# define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +# define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +# define CFG_FLASH_UNLOCK_TOUT 100 /* Timeout for Flash Clear Lock Bits (in ms) */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM + +#endif + +/* + * This is setting for JFFS2 support in u-boot. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. + */ +#ifdef CFG_ATMEL_BOOT +# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_PART_SIZE 0x01000000 +# define CONFIG_JFFS2_PART_OFFSET CFG_FLASH1_BASE +#else +# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) +# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x500000) +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - CompactFlash and registers + * CS2 - CPLD + * CS3 - FPGA + * CS4 - Available + * CS5 - Available + */ + +#ifdef CFG_ATMEL_BOOT + /* Atmel Flash */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x00070001 +#define CFG_CS0_CTRL 0x00001140 +/* Intel Flash */ +#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_MASK 0x01FF0001 +#define CFG_CS1_CTRL 0x003F3D60 + +#define CFG_ATMEL_BASE CFG_CS0_BASE +#else +/* Intel Flash */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x01FF0001 +#define CFG_CS0_CTRL 0x003F3D60 + /* Atmel Flash */ +#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_MASK 0x00070001 +#define CFG_CS1_CTRL 0x00001140 + +#define CFG_ATMEL_BASE CFG_CS1_BASE +#endif + +/* CPLD */ +#define CFG_CS2_BASE 0x08000000 +#define CFG_CS2_MASK 0x00070001 +#define CFG_CS2_CTRL 0x003f1140 + +/* FPGA */ +#define CFG_CS3_BASE 0x09000000 +#define CFG_CS3_MASK 0x00070001 +#define CFG_CS3_CTRL 0x00000020 + +#endif /* _JAMICA54455_H */ diff --git a/lib_m68k/board.c b/lib_m68k/board.c index 778ec78..43f97c4 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -30,9 +30,7 @@ #include #include -#ifdef CONFIG_M5272 -#include -#endif +#include #if defined(CONFIG_CMD_IDE) #include @@ -139,19 +137,19 @@ void *sbrk (ptrdiff_t increment) char *strmhz(char *buf, long hz) { - long l, n; - long m; + long l, n; + long m; - n = hz / 1000000L; + n = hz / 1000000L; - l = sprintf (buf, "%ld", n); + l = sprintf (buf, "%ld", n); - m = (hz % 1000000L) / 1000L; + m = (hz % 1000000L) / 1000L; - if (m != 0) - sprintf (buf+l, ".%03ld", m); + if (m != 0) + sprintf (buf+l, ".%03ld", m); - return (buf); + return (buf); } /* @@ -169,7 +167,7 @@ char *strmhz(char *buf, long hz) typedef int (init_fnc_t) (void); /************************************************************************ - * Init Utilities * + * Init Utilities ************************************************************************ * Some of this code should be moved into the core functions, * but let's get it working (again) first... @@ -383,6 +381,14 @@ board_init_f (ulong bootflag) WATCHDOG_RESET (); bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ +#ifdef CONFIG_PCI + bd->bi_pcifreq = gd->pci_clk; /* PCI Freq in Hz */ +#endif +#ifdef CONFIG_EXTRA_CLOCK + bd->bi_inpfreq = gd->inp_clk; /* input Freq in Hz */ + bd->bi_vcofreq = gd->vco_clk; /* vco Freq in Hz */ + bd->bi_flbfreq = gd->flb_clk; /* flexbus Freq in Hz */ +#endif bd->bi_baudrate = gd->baudrate; /* Console Baudrate */ #ifdef CFG_EXTBDINFO diff --git a/lib_m68k/interrupts.c b/lib_m68k/interrupts.c old mode 100755 new mode 100644 diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c index 6c194f8..fde1744 100644 --- a/lib_m68k/m68k_linux.c +++ b/lib_m68k/m68k_linux.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -34,103 +36,189 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 -extern image_header_t header; /* from cmd_bootm.c */ - -extern int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); - -static int linux_argc; -static char **linux_argv; - -static char **linux_env; -static char *linux_env_p; -static int linux_env_idx; +#ifdef CONFIG_SHOW_BOOT_PROGRESS +# include +# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) +#else +# define SHOW_BOOT_PROGRESS(arg) +#endif -static void linux_params_init (ulong start, char *commandline); -static void linux_env_set (char *env_name, char *env_val); +extern image_header_t header; -void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], - ulong addr, ulong * len_ptr, int verify) +void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, + int argc, char *argv[], + ulong addr, ulong * len_ptr, int verify) { - ulong len = 0, checksum; + ulong sp; + ulong len, checksum; ulong initrd_start, initrd_end; + ulong cmd_start, cmd_end; + ulong initrd_high; ulong data; - void (*theKernel) (int, char **, char **, int *); + int initrd_copy_to_ram = 1; + char *cmdline; + char *s; + bd_t *kbd; + void (*kernel) (bd_t *, ulong, ulong, ulong, ulong); image_header_t *hdr = &header; - char *commandline = getenv ("bootargs"); - char env_buf[12]; - theKernel = - (void (*)(int, char **, char **, int *)) ntohl (hdr->ih_ep); + if ((s = getenv("initrd_high")) != NULL) { + /* a value of "no" or a similar string will act like 0, + * turning the "load high" feature off. This is intentional. + */ + initrd_high = simple_strtoul(s, NULL, 16); + if (initrd_high == ~0) + initrd_copy_to_ram = 0; + } else { /* not set, no restrictions to load high */ + initrd_high = ~0; + } + +#ifdef CONFIG_LOGBUFFER + kbd = gd->bd; + /* Prevent initrd from overwriting logbuffer */ + if (initrd_high < (kbd->bi_memsize - LOGBUFF_LEN - LOGBUFF_OVERHEAD)) + initrd_high = kbd->bi_memsize - LOGBUFF_LEN - LOGBUFF_OVERHEAD; + debug("## Logbuffer at 0x%08lX ", kbd->bi_memsize - LOGBUFF_LEN); +#endif + + /* + * Booting a (Linux) kernel image + * + * Allocate space for command line and board info - the + * address should be as high as possible within the reach of + * the kernel (see CFG_BOOTMAPSZ settings), but in unused + * memory, which means far enough below the current stack + * pointer. + */ + asm("movel %%a7, %%d0\n" + "movel %%d0, %0\n": "=d"(sp): :"%d0"); + debug("## Current stack ends at 0x%08lX ", sp); + + sp -= 2048; /* just to be sure */ + if (sp > CFG_BOOTMAPSZ) + sp = CFG_BOOTMAPSZ; + sp &= ~0xF; + + debug("=> set upper limit to 0x%08lX\n", sp); + + cmdline = (char *)((sp - CFG_BARGSIZE) & ~0xF); + kbd = (bd_t *) (((ulong) cmdline - sizeof(bd_t)) & ~0xF); + + if ((s = getenv("bootargs")) == NULL) + s = ""; + + strcpy(cmdline, s); + + cmd_start = (ulong) & cmdline[0]; + cmd_end = cmd_start + strlen(cmdline); + + *kbd = *(gd->bd); + +#ifdef DEBUG + printf("## cmdline at 0x%08lX ... 0x%08lX\n", cmd_start, cmd_end); + + do_bdinfo(NULL, 0, 0, NULL); +#endif + + if ((s = getenv("clocks_in_mhz")) != NULL) { + /* convert all clock information to MHz */ + kbd->bi_intfreq /= 1000000L; + kbd->bi_busfreq /= 1000000L; + } + + kernel = + (void (*)(bd_t *, ulong, ulong, ulong, ulong))ntohl(hdr->ih_ep); /* * Check if there is an initrd image */ + if (argc >= 3) { - show_boot_progress (9); + debug("Not skipping initrd\n"); + SHOW_BOOT_PROGRESS(9); - addr = simple_strtoul (argv[2], NULL, 16); + addr = simple_strtoul(argv[2], NULL, 16); - printf ("## Loading Ramdisk Image at %08lx ...\n", addr); + printf("## Loading RAMDisk Image at %08lx ...\n", addr); /* Copy header so we can blank CRC field for re-calculation */ - memcpy (&header, (char *) addr, sizeof (image_header_t)); + memmove(&header, (char *)addr, sizeof(image_header_t)); - if (ntohl (hdr->ih_magic) != IH_MAGIC) { - printf ("Bad Magic Number\n"); - show_boot_progress (-10); - do_reset (cmdtp, flag, argc, argv); + if (ntohl(hdr->ih_magic) != IH_MAGIC) { + puts("Bad Magic Number\n"); + SHOW_BOOT_PROGRESS(-10); + do_reset(cmdtp, flag, argc, argv); } data = (ulong) & header; - len = sizeof (image_header_t); + len = sizeof(image_header_t); - checksum = ntohl (hdr->ih_hcrc); + checksum = ntohl(hdr->ih_hcrc); hdr->ih_hcrc = 0; - if (crc32 (0, (char *) data, len) != checksum) { - printf ("Bad Header Checksum\n"); - show_boot_progress (-11); - do_reset (cmdtp, flag, argc, argv); + if (crc32(0, (uchar *) data, len) != checksum) { + puts("Bad Header Checksum\n"); + SHOW_BOOT_PROGRESS(-11); + do_reset(cmdtp, flag, argc, argv); } - show_boot_progress (10); + SHOW_BOOT_PROGRESS(10); - print_image_hdr (hdr); + print_image_hdr(hdr); - data = addr + sizeof (image_header_t); - len = ntohl (hdr->ih_size); + data = addr + sizeof(image_header_t); + len = ntohl(hdr->ih_size); if (verify) { ulong csum = 0; +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + ulong cdata = data, edata = cdata + len; +#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */ - printf (" Verifying Checksum ... "); - csum = crc32 (0, (char *) data, len); - if (csum != ntohl (hdr->ih_dcrc)) { - printf ("Bad Data CRC\n"); - show_boot_progress (-12); - do_reset (cmdtp, flag, argc, argv); + puts(" Verifying Checksum ... "); + +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + + while (cdata < edata) { + ulong chunk = edata - cdata; + + if (chunk > CHUNKSZ) + chunk = CHUNKSZ; + csum = crc32(csum, (uchar *) cdata, chunk); + cdata += chunk; + + WATCHDOG_RESET(); } - printf ("OK\n"); +#else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */ + csum = crc32(0, (uchar *) data, len); +#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */ + + if (csum != ntohl(hdr->ih_dcrc)) { + puts("Bad Data CRC\n"); + SHOW_BOOT_PROGRESS(-12); + do_reset(cmdtp, flag, argc, argv); + } + puts("OK\n"); } - show_boot_progress (11); + SHOW_BOOT_PROGRESS(11); if ((hdr->ih_os != IH_OS_LINUX) || (hdr->ih_arch != IH_CPU_M68K) || (hdr->ih_type != IH_TYPE_RAMDISK)) { - printf ("No Linux M68K Ramdisk Image\n"); - show_boot_progress (-13); - do_reset (cmdtp, flag, argc, argv); + puts("No Linux ColdFire Ramdisk Image\n"); + SHOW_BOOT_PROGRESS(-13); + do_reset(cmdtp, flag, argc, argv); } /* * Now check if we have a multifile image */ } else if ((hdr->ih_type == IH_TYPE_MULTI) && (len_ptr[1])) { - ulong tail = ntohl (len_ptr[0]) % 4; + u_long tail = ntohl(len_ptr[0]) % 4; int i; - show_boot_progress (13); + SHOW_BOOT_PROGRESS(13); /* skip kernel length and terminator */ data = (ulong) (&len_ptr[2]); @@ -138,130 +226,110 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], for (i = 1; len_ptr[i]; ++i) data += 4; /* add kernel length, and align */ - data += ntohl (len_ptr[0]); + data += ntohl(len_ptr[0]); if (tail) { data += 4 - tail; } - len = ntohl (len_ptr[1]); + len = ntohl(len_ptr[1]); } else { /* * no initrd image */ - show_boot_progress (14); + SHOW_BOOT_PROGRESS(14); - data = 0; + len = data = 0; } -#ifdef DEBUG if (!data) { - printf ("No initrd\n"); + debug("No initrd\n"); } -#endif if (data) { - initrd_start = data; - initrd_end = initrd_start + len; - } else { - initrd_start = 0; - initrd_end = 0; - } - - show_boot_progress (15); - -#ifdef DEBUG - printf ("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); -#endif - - linux_params_init (PHYSADDR (gd->bd->bi_boot_params), commandline); - - sprintf (env_buf, "%lu", gd->ram_size >> 20); - linux_env_set ("memsize", env_buf); - - sprintf (env_buf, "0x%08X", (uint) PHYSADDR (initrd_start)); - linux_env_set ("initrd_start", env_buf); - - sprintf (env_buf, "0x%X", (uint) (initrd_end - initrd_start)); - linux_env_set ("initrd_size", env_buf); - - sprintf (env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart)); - linux_env_set ("flash_start", env_buf); - - sprintf (env_buf, "0x%X", (uint) (gd->bd->bi_flashsize)); - linux_env_set ("flash_size", env_buf); - - /* we assume that the kernel is in place */ - printf ("\nStarting kernel ...\n\n"); - - theKernel (linux_argc, linux_argv, linux_env, 0); -} - -static void linux_params_init (ulong start, char *line) -{ - char *next, *quote, *argp; - - linux_argc = 1; - linux_argv = (char **) start; - linux_argv[0] = 0; - argp = (char *) (linux_argv + LINUX_MAX_ARGS); - - next = line; - - while (line && *line && linux_argc < LINUX_MAX_ARGS) { - quote = strchr (line, '"'); - next = strchr (line, ' '); - - while (next != NULL && quote != NULL && quote < next) { - /* we found a left quote before the next blank - * now we have to find the matching right quote - */ - next = strchr (quote + 1, '"'); - if (next != NULL) { - quote = strchr (next + 1, '"'); - next = strchr (next + 1, ' '); + if (!initrd_copy_to_ram) { /* zero-copy ramdisk support */ + initrd_start = data; + initrd_end = initrd_start + len; + } else { + initrd_start = (ulong) kbd - len; + initrd_start &= ~(4096 - 1); /* align on page */ + + if (initrd_high) { + ulong nsp; + + /* + * the inital ramdisk does not need to be within + * CFG_BOOTMAPSZ as it is not accessed until after + * the mm system is initialised. + * + * do the stack bottom calculation again and see if + * the initrd will fit just below the monitor stack + * bottom without overwriting the area allocated + * above for command line args and board info. + */ + asm("movel %%a7, %%d0\n" + "movel %%d0, %0\n": "=d"(nsp): :"%d0"); + nsp -= 2048; /* just to be sure */ + nsp &= ~0xF; + + if (nsp > initrd_high) /* limit as specified */ + nsp = initrd_high; + + nsp -= len; + nsp &= ~(4096 - 1); /* align on page */ + + if (nsp >= sp) + initrd_start = nsp; } - } - if (next == NULL) { - next = line + strlen (line); + SHOW_BOOT_PROGRESS(12); + + debug + ("## initrd at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n", + data, data + len - 1, len, len); + + initrd_end = initrd_start + len; + printf(" Loading Ramdisk to %08lx, end %08lx ... ", + initrd_start, initrd_end); +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + { + size_t l = len; + void *to = (void *)initrd_start; + void *from = (void *)data; + + while (l > 0) { + size_t tail = + (l > CHUNKSZ) ? CHUNKSZ : l; + WATCHDOG_RESET(); + memmove(to, from, tail); + to += tail; + from += tail; + l -= tail; + } + } +#else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */ + memmove((void *)initrd_start, (void *)data, len); +#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */ + puts("OK\n"); } - - linux_argv[linux_argc] = argp; - memcpy (argp, line, next - line); - argp[next - line] = 0; - - argp += next - line + 1; - linux_argc++; - - if (*next) - next++; - - line = next; + } else { + initrd_start = 0; + initrd_end = 0; } - linux_env = (char **) (((ulong) argp + 15) & ~15); - linux_env[0] = 0; - linux_env_p = (char *) (linux_env + LINUX_MAX_ENVS); - linux_env_idx = 0; -} - -static void linux_env_set (char *env_name, char *env_val) -{ - if (linux_env_idx < LINUX_MAX_ENVS - 1) { - linux_env[linux_env_idx] = linux_env_p; - - strcpy (linux_env_p, env_name); - linux_env_p += strlen (env_name); + debug("## Transferring control to Linux (at address %08lx) ...\n", + (ulong) kernel); - strcpy (linux_env_p, "="); - linux_env_p += 1; + SHOW_BOOT_PROGRESS(15); - strcpy (linux_env_p, env_val); - linux_env_p += strlen (env_val); - - linux_env_p++; - linux_env[++linux_env_idx] = 0; - } + /* + * Linux Kernel Parameters (passing board info data): + * r3: ptr to board info data + * r4: initrd_start or 0 if no initrd + * r5: initrd_end - unused if r4 is 0 + * r6: Start of command line string + * r7: End of command line string + */ + (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); + /* does not return */ } -- cgit v1.1 From 14778585d1389d86d5846efec29e5fce892680ce Mon Sep 17 00:00:00 2001 From: Tony Li Date: Fri, 17 Aug 2007 10:35:59 +0800 Subject: mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board. Signed-off-by Tony Li --- board/freescale/common/pq-mds-pib.c | 101 ++++++++++++++++++++++++++++++++++++ board/freescale/common/pq-mds-pib.h | 9 ++++ board/mpc832xemds/Makefile | 2 +- board/mpc832xemds/mpc832xemds.c | 11 ++++ board/mpc832xemds/pci.c | 40 -------------- board/mpc8360emds/Makefile | 2 +- board/mpc8360emds/mpc8360emds.c | 11 ++++ board/mpc8360emds/pci.c | 40 -------------- include/configs/MPC832XEMDS.h | 3 ++ include/configs/MPC8360EMDS.h | 7 ++- 10 files changed, 142 insertions(+), 84 deletions(-) create mode 100644 board/freescale/common/pq-mds-pib.c create mode 100644 board/freescale/common/pq-mds-pib.h diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c new file mode 100644 index 0000000..9799117 --- /dev/null +++ b/board/freescale/common/pq-mds-pib.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * Tony Li + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +#include +#include +#include + +#include "pq-mds-pib.h" + +int pib_init(void) +{ + u8 val8; + u8 orig_i2c_bus; + + /* Switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); +#if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE) + /* Assign PIB PMC slot to desired PCI bus */ + val8 = 0; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(CONFIG_MPC832XEMDS) + val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ +#else + val8 = 0xf3; /* PMC1, PMC2, PMC3 slot to PCI bus */ +#endif + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + + eieio(); + +#if defined(CONFIG_MPC832XEMDS) + printf("PCI 32bit bus on PMC2 &PMC3\n"); +#else + printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n"); +#endif +#endif + +#if defined(CONFIG_PQ_MDS_PIB_ATM) +#if defined(CONFIG_MPC8360EMDS) + val8 = 0; + i2c_write(0x20, 0x6, 1, &val8, 1); + i2c_write(0x20, 0x7, 1, &val8, 1); + + val8 = 0xdf; + i2c_write(0x20, 0x2, 1, &val8, 1); + val8 = 0xf7; + i2c_write(0x20, 0x3, 1, &val8, 1); + + eieio(); + + printf("QOC3 ATM card on PMC0\n"); +#elif defined(CONFIG_MPC832XEMDS) + val = 0; + i2c_write(0x26, 0x7, 1, &val, 1); + val = 0xf7; + i2c_write(0x26, 0x3, 1, &val, 1); + + val = 0; + i2c_write(0x21, 0x6, 1, &val, 1); + i2c_write(0x21, 0x7, 1, &val, 1); + + val = 0xdf; + i2c_write(0x21, 0x2, 1, &val, 1); + val = 0xef; + i2c_write(0x21, 0x3, 1, &val, 1); + + eieio(); + + printf("QOC3 ATM card on PMC1\n"); +#endif +#endif + /* Reset to original I2C bus */ + i2c_set_bus_num(orig_i2c_bus); + return 0; +} diff --git a/board/freescale/common/pq-mds-pib.h b/board/freescale/common/pq-mds-pib.h new file mode 100644 index 0000000..67066fd --- /dev/null +++ b/board/freescale/common/pq-mds-pib.h @@ -0,0 +1,9 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +extern int pib_init(void); diff --git a/board/mpc832xemds/Makefile b/board/mpc832xemds/Makefile index 5ec7a87..4da74b8 100644 --- a/board/mpc832xemds/Makefile +++ b/board/mpc832xemds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c index f70783e..207fcdf 100644 --- a/board/mpc832xemds/mpc832xemds.c +++ b/board/mpc832xemds/mpc832xemds.c @@ -32,6 +32,9 @@ #elif defined(CONFIG_OF_LIBFDT) #include #endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../freescale/common/pq-mds-pib.h" +#endif const qe_iop_conf_t qe_iop_conf_tab[] = { /* ETH3 */ @@ -88,6 +91,14 @@ int board_early_init_f(void) return 0; } +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + int fixed_sdram(void); long int initdram(int board_type) diff --git a/board/mpc832xemds/pci.c b/board/mpc832xemds/pci.c index c2f61ea..6bc35c7 100644 --- a/board/mpc832xemds/pci.c +++ b/board/mpc832xemds/pci.c @@ -131,7 +131,6 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - u8 val8, orig_i2c_bus; u16 reg16; u32 val32; u32 dev; @@ -200,43 +199,6 @@ void pci_init_board(void) PIWAR_IWS_2G; /* - * Assign PIB PMC slot to desired PCI bus - */ - - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); - - val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); - - /* * Release PCI RST Output signal */ udelay(2000); @@ -292,8 +254,6 @@ void pci_init_board(void) pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - printf("PCI 32bit bus on PMC2 & PMC3\n"); - /* * Hose scan. */ diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile index 5ec7a87..4da74b8 100644 --- a/board/mpc8360emds/Makefile +++ b/board/mpc8360emds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index 3861733..d6d0f4e 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -30,6 +30,9 @@ #elif defined(CONFIG_OF_LIBFDT) #include #endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../freescale/common/pq-mds-pib.h" +#endif const qe_iop_conf_t qe_iop_conf_tab[] = { /* GETH1 */ @@ -106,6 +109,14 @@ int board_early_init_f(void) return 0; } +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void ddr_enable_ecc(unsigned int dram_size); #endif diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c index 7981285..cf7ef90 100644 --- a/board/mpc8360emds/pci.c +++ b/board/mpc8360emds/pci.c @@ -131,7 +131,6 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - u8 val8, orig_i2c_bus; u16 reg16; u32 val32; u32 dev; @@ -200,43 +199,6 @@ void pci_init_board(void) PIWAR_IWS_2G; /* - * Assign PIB PMC slot to desired PCI bus - */ - - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); - - val8 = 0xf3; /*PMC1, PMC2, PMC3 slot to PCI bus */ - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); - - /* * Release PCI RST Output signal */ udelay(2000); @@ -292,8 +254,6 @@ void pci_init_board(void) pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n"); - /* * Hose scan. */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index e8c6b75..efc3172 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -30,6 +30,8 @@ #define CONFIG_MPC83XX 1 /* MPC83xx family */ #define CONFIG_MPC832X 1 /* MPC832x CPU specific */ #define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -87,6 +89,7 @@ #define CFG_SICRL 0x00000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 4b32a14..094b66e 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -32,6 +32,8 @@ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -88,6 +90,7 @@ #define CFG_SICRL 0x40000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address @@ -309,13 +312,13 @@ /* * CS4 on Local Bus, to PIB */ -#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */ +#define CFG_BR4_PRELIM 0xf8010801 /* CS4 base address at 0xf8010000 */ #define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* * CS5 on Local Bus, to PIB */ -#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */ +#define CFG_BR5_PRELIM 0xf8008801 /* CS5 base address at 0xf8008000 */ #define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* -- cgit v1.1 From bbea46f76f767b919070b4829bf34c86bd223248 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 16 Aug 2007 22:52:48 -0500 Subject: mpc83xx: implement board_add_ram_info add board_add_ram_info, to make memory diagnostic output more consistent. u-boot banner output now looks like: DRAM: 256 MB (DDR1, 64-bit, ECC on) and for boards with SDRAM on the local bus, a line such as this is added: SDRAM: 64 MB (local bus) also replaced some magic numbers with their equivalent define names. Signed-off-by: Kim Phillips --- board/freescale/mpc8323erdb/mpc8323erdb.c | 2 -- board/mpc8313erdb/sdram.c | 3 -- board/mpc832xemds/mpc832xemds.c | 2 -- board/mpc8349emds/mpc8349emds.c | 8 +---- board/mpc8349itx/mpc8349itx.c | 3 +- board/mpc8360emds/mpc8360emds.c | 5 +-- board/sbc8349/sbc8349.c | 5 +-- board/tqm834x/tqm834x.c | 4 +-- cpu/mpc83xx/spd_sdram.c | 54 ++++++++++++++++++++++--------- include/configs/MPC8313ERDB.h | 4 +-- include/mpc83xx.h | 5 +-- 11 files changed, 50 insertions(+), 45 deletions(-) diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index 850d1c3..e738613 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -91,8 +91,6 @@ long int initdram(int board_type) msize = fixed_sdram(); - puts("\n DDR RAM: "); - /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } diff --git a/board/mpc8313erdb/sdram.c b/board/mpc8313erdb/sdram.c index 4b67788..e6e8410 100644 --- a/board/mpc8313erdb/sdram.c +++ b/board/mpc8313erdb/sdram.c @@ -112,8 +112,6 @@ long int initdram(int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ msize = fixed_sdram(); @@ -127,7 +125,6 @@ long int initdram(int board_type) resume_from_sleep(); #endif - puts(" DDR RAM: "); /* return total bus SDRAM size(bytes) -- DDR */ return msize; } diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c index 207fcdf..7a45ded 100644 --- a/board/mpc832xemds/mpc832xemds.c +++ b/board/mpc832xemds/mpc832xemds.c @@ -114,8 +114,6 @@ long int initdram(int board_type) msize = fixed_sdram(); - puts("\n DDR RAM: "); - /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c index 2ad25ec..39c0916 100644 --- a/board/mpc8349emds/mpc8349emds.c +++ b/board/mpc8349emds/mpc8349emds.c @@ -70,8 +70,6 @@ long int initdram (int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) @@ -90,7 +88,7 @@ long int initdram (int board_type) */ ddr_enable_ecc(msize * 1024 * 1024); #endif - puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -191,9 +189,6 @@ void sdram_init(void) volatile lbus83xx_t *lbc= &immap->lbus; uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; - puts("\n SDRAM on Local Bus: "); - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); - /* * Setup SDRAM Base and Option Registers, already done in cpu_init.c */ @@ -255,7 +250,6 @@ void sdram_init(void) #else void sdram_init(void) { - puts(" SDRAM on Local Bus is NOT available!\n"); } #endif diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c index 125e6c0..c82f784 100644 --- a/board/mpc8349itx/mpc8349itx.c +++ b/board/mpc8349itx/mpc8349itx.c @@ -76,7 +76,7 @@ int fixed_sdram(void) im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ - im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR; + im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; im->ddr.sdram_mode = (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); im->ddr.sdram_interval = @@ -162,7 +162,6 @@ long int initdram(int board_type) ddr_enable_ecc(msize * 1048576); #endif - puts(" DDR RAM: "); /* return total bus RAM size(bytes) */ return msize * 1024 * 1024; } diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index d6d0f4e..0751c6f 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -149,7 +149,7 @@ long int initdram(int board_type) * Initialize SDRAM if it is on local bus. */ sdram_init(); - puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -234,8 +234,6 @@ void sdram_init(void) volatile lbus83xx_t *lbc = &immap->lbus; uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; - puts("\n SDRAM on Local Bus: "); - print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* * Setup SDRAM Base and Option Registers, already done in cpu_init.c */ @@ -291,7 +289,6 @@ void sdram_init(void) #else void sdram_init(void) { - puts("SDRAM on Local Bus is NOT available!\n"); } #endif diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index 4cd447e..86166ea 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -64,8 +64,6 @@ long int initdram (int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) @@ -84,7 +82,6 @@ long int initdram (int board_type) */ ddr_enable_ecc(msize * 1024 * 1024); #endif - puts(" DDR RAM: "); /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -130,7 +127,7 @@ int fixed_sdram(void) #if defined(CONFIG_DDR_2T_TIMING) | SDRAM_CFG_2T_EN #endif - | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; + | SDRAM_CFG_SDRAM_TYPE_DDR1; #if defined (CONFIG_DDR_32BIT) /* for 32-bit mode burst length is 8 */ im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c index 9c35e22..7d0b055 100644 --- a/board/tqm834x/tqm834x.c +++ b/board/tqm834x/tqm834x.c @@ -114,7 +114,7 @@ long int initdram (int board_type) /* enable DDR controller */ im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN | SDRAM_CFG_SREN | - SDRAM_CFG_SDRAM_TYPE_DDR); + SDRAM_CFG_SDRAM_TYPE_DDR1); SYNC; /* size detection */ @@ -388,7 +388,7 @@ static void set_ddr_config(void) { /* don't enable DDR controller yet */ im->ddr.sdram_cfg = SDRAM_CFG_SREN | - SDRAM_CFG_SDRAM_TYPE_DDR; + SDRAM_CFG_SDRAM_TYPE_DDR1; SYNC; /* Set SDRAM mode */ diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 54f0c83..040836c 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -34,6 +34,30 @@ #include #include +void board_add_ram_info(int use_default) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile ddr83xx_t *ddr = &immap->ddr; + + printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) + >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1); + + if (ddr->sdram_cfg & SDRAM_CFG_32_BE) + puts(", 32-bit"); + else + puts(", 64-bit"); + + if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) + puts(", ECC on)"); + else + puts(", ECC off)"); + +#if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE) + puts("\nSDRAM: "); + print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)"); +#endif +} + #ifdef CONFIG_SPD_EEPROM DECLARE_GLOBAL_DATA_PTR; @@ -109,7 +133,7 @@ long int spd_sdram() unsigned int n_ranks; unsigned int odt_rd_cfg, odt_wr_cfg; unsigned char twr_clk, twtr_clk; - unsigned char sdram_type; + unsigned int sdram_type; unsigned int memsize; unsigned int law_size; unsigned char caslat, caslat_ctrl; @@ -137,7 +161,7 @@ long int spd_sdram() #endif /* Check the memory type */ if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) { - printf("DDR: Module mem type is %02X\n", spd.mem_type); + debug("DDR: Module mem type is %02X\n", spd.mem_type); return 0; } @@ -578,17 +602,17 @@ long int spd_sdram() burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ else burstlen = 0x02; /* 32 bit data bus, burst len is 4 */ - printf("\n DDR DIMM: data bus width is 32 bit"); + debug("\n DDR DIMM: data bus width is 32 bit"); } else { burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */ - printf("\n DDR DIMM: data bus width is 64 bit"); + debug("\n DDR DIMM: data bus width is 64 bit"); } /* Is this an ECC DDR chip? */ if (spd.config == 0x02) - printf(" with ECC\n"); + debug(" with ECC\n"); else - printf(" without ECC\n"); + debug(" without ECC\n"); /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus, Burst type is sequential @@ -718,26 +742,26 @@ long int spd_sdram() * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts) */ if (spd.mem_type == SPD_MEMTYPE_DDR) - sdram_type = 2; + sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1; else - sdram_type = 3; + sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1; sdram_cfg = (0 - | (1 << 31) /* DDR enable */ - | (1 << 30) /* Self refresh */ - | (sdram_type << 24) /* SDRAM type */ + | SDRAM_CFG_MEM_EN /* DDR enable */ + | SDRAM_CFG_SREN /* Self refresh */ + | sdram_type /* SDRAM type */ ); /* sdram_cfg[3] = RD_EN - registered DIMM enable */ if (spd.mod_attr & 0x02) - sdram_cfg |= 0x10000000; + sdram_cfg |= SDRAM_CFG_RD_EN; /* The DIMM is 32bit width */ if (spd.dataw_lsb == 0x20) { if (spd.mem_type == SPD_MEMTYPE_DDR) - sdram_cfg |= 0x000C0000; + sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE; if (spd.mem_type == SPD_MEMTYPE_DDR2) - sdram_cfg |= 0x00080000; + sdram_cfg |= SDRAM_CFG_32_BE; } ddrc_ecc_enable = 0; @@ -758,7 +782,7 @@ long int spd_sdram() debug("DDR:err_disable=0x%08x\n", ddr->err_disable); debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe); #endif - printf(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF"); + debug(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF"); #if defined(CONFIG_DDR_2T_TIMING) /* diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index e2ec0bc..db79ce2 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -113,12 +113,12 @@ /* 0x03200064 */ #if defined(CONFIG_DDR_2T_TIMING) #define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ - | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ | SDRAM_CFG_2T_EN \ | SDRAM_CFG_DBW_32 ) #else #define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ - | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ | SDRAM_CFG_32_BE ) /* 0x43080000 */ #endif diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 829dbf9..4d32c6a 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -705,8 +705,9 @@ #define SDRAM_CFG_SREN 0x40000000 #define SDRAM_CFG_ECC_EN 0x20000000 #define SDRAM_CFG_RD_EN 0x10000000 -#define SDRAM_CFG_SDRAM_TYPE 0x03000000 -#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR1 0x02000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR2 0x03000000 +#define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000 #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 #define SDRAM_CFG_32_BE 0x00080000 -- cgit v1.1 From 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 16 Aug 2007 22:52:59 -0500 Subject: mpc83xx: suppress unused variable 'val8' warning Signed-off-by: Kim Phillips --- board/freescale/common/pq-mds-pib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c index 9799117..8c013c7 100644 --- a/board/freescale/common/pq-mds-pib.c +++ b/board/freescale/common/pq-mds-pib.c @@ -22,9 +22,10 @@ int pib_init(void) /* Switch temporarily to I2C bus #2 */ orig_i2c_bus = i2c_get_bus_num(); i2c_set_bus_num(1); + + val8 = 0; #if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE) /* Assign PIB PMC slot to desired PCI bus */ - val8 = 0; i2c_write(0x23, 0x6, 1, &val8, 1); i2c_write(0x23, 0x7, 1, &val8, 1); val8 = 0xff; -- cgit v1.1 From e58fe95784d2514fc9c21028dc59f2b319a35d80 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 16 Aug 2007 22:53:09 -0500 Subject: mpc83xx: move freescale boards to boards/freescale includes build fixes. Signed-off-by: Kim Phillips --- Makefile | 10 +- board/freescale/mpc8313erdb/Makefile | 50 ++++ board/freescale/mpc8313erdb/config.mk | 1 + board/freescale/mpc8313erdb/mpc8313erdb.c | 121 ++++++++ board/freescale/mpc8313erdb/sdram.c | 130 +++++++++ board/freescale/mpc832xemds/Makefile | 50 ++++ board/freescale/mpc832xemds/config.mk | 28 ++ board/freescale/mpc832xemds/mpc832xemds.c | 187 +++++++++++++ board/freescale/mpc832xemds/pci.c | 298 ++++++++++++++++++++ board/freescale/mpc8349emds/Makefile | 50 ++++ board/freescale/mpc8349emds/config.mk | 28 ++ board/freescale/mpc8349emds/mpc8349emds.c | 274 ++++++++++++++++++ board/freescale/mpc8349emds/pci.c | 446 ++++++++++++++++++++++++++++++ board/freescale/mpc8349itx/Makefile | 48 ++++ board/freescale/mpc8349itx/config.mk | 31 +++ board/freescale/mpc8349itx/mpc8349itx.c | 407 +++++++++++++++++++++++++++ board/freescale/mpc8349itx/pci.c | 392 ++++++++++++++++++++++++++ board/freescale/mpc8360emds/Makefile | 50 ++++ board/freescale/mpc8360emds/config.mk | 28 ++ board/freescale/mpc8360emds/mpc8360emds.c | 313 +++++++++++++++++++++ board/freescale/mpc8360emds/pci.c | 298 ++++++++++++++++++++ board/mpc8313erdb/Makefile | 50 ---- board/mpc8313erdb/config.mk | 1 - board/mpc8313erdb/mpc8313erdb.c | 121 -------- board/mpc8313erdb/sdram.c | 130 --------- board/mpc832xemds/Makefile | 50 ---- board/mpc832xemds/config.mk | 28 -- board/mpc832xemds/mpc832xemds.c | 187 ------------- board/mpc832xemds/pci.c | 298 -------------------- board/mpc8349emds/Makefile | 50 ---- board/mpc8349emds/config.mk | 28 -- board/mpc8349emds/mpc8349emds.c | 274 ------------------ board/mpc8349emds/pci.c | 446 ------------------------------ board/mpc8349itx/Makefile | 48 ---- board/mpc8349itx/config.mk | 31 --- board/mpc8349itx/mpc8349itx.c | 407 --------------------------- board/mpc8349itx/pci.c | 392 -------------------------- board/mpc8360emds/Makefile | 50 ---- board/mpc8360emds/config.mk | 28 -- board/mpc8360emds/mpc8360emds.c | 313 --------------------- board/mpc8360emds/pci.c | 298 -------------------- 41 files changed, 3235 insertions(+), 3235 deletions(-) create mode 100644 board/freescale/mpc8313erdb/Makefile create mode 100644 board/freescale/mpc8313erdb/config.mk create mode 100644 board/freescale/mpc8313erdb/mpc8313erdb.c create mode 100644 board/freescale/mpc8313erdb/sdram.c create mode 100644 board/freescale/mpc832xemds/Makefile create mode 100644 board/freescale/mpc832xemds/config.mk create mode 100644 board/freescale/mpc832xemds/mpc832xemds.c create mode 100644 board/freescale/mpc832xemds/pci.c create mode 100644 board/freescale/mpc8349emds/Makefile create mode 100644 board/freescale/mpc8349emds/config.mk create mode 100644 board/freescale/mpc8349emds/mpc8349emds.c create mode 100644 board/freescale/mpc8349emds/pci.c create mode 100644 board/freescale/mpc8349itx/Makefile create mode 100644 board/freescale/mpc8349itx/config.mk create mode 100644 board/freescale/mpc8349itx/mpc8349itx.c create mode 100644 board/freescale/mpc8349itx/pci.c create mode 100644 board/freescale/mpc8360emds/Makefile create mode 100644 board/freescale/mpc8360emds/config.mk create mode 100644 board/freescale/mpc8360emds/mpc8360emds.c create mode 100644 board/freescale/mpc8360emds/pci.c delete mode 100644 board/mpc8313erdb/Makefile delete mode 100644 board/mpc8313erdb/config.mk delete mode 100644 board/mpc8313erdb/mpc8313erdb.c delete mode 100644 board/mpc8313erdb/sdram.c delete mode 100644 board/mpc832xemds/Makefile delete mode 100644 board/mpc832xemds/config.mk delete mode 100644 board/mpc832xemds/mpc832xemds.c delete mode 100644 board/mpc832xemds/pci.c delete mode 100644 board/mpc8349emds/Makefile delete mode 100644 board/mpc8349emds/config.mk delete mode 100644 board/mpc8349emds/mpc8349emds.c delete mode 100644 board/mpc8349emds/pci.c delete mode 100644 board/mpc8349itx/Makefile delete mode 100644 board/mpc8349itx/config.mk delete mode 100644 board/mpc8349itx/mpc8349itx.c delete mode 100644 board/mpc8349itx/pci.c delete mode 100644 board/mpc8360emds/Makefile delete mode 100644 board/mpc8360emds/config.mk delete mode 100644 board/mpc8360emds/mpc8360emds.c delete mode 100644 board/mpc8360emds/pci.c diff --git a/Makefile b/Makefile index 65efd3f..62531a5 100644 --- a/Makefile +++ b/Makefile @@ -1688,7 +1688,7 @@ MPC8313ERDB_66_config: unconfig echo -n "...66M..." ; \ echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb + @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale MPC8323ERDB_config: unconfig @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale @@ -1716,10 +1716,10 @@ MPC832XEMDS_SLAVE_config: unconfig echo -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds + @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale MPC8349EMDS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale MPC8349ITX_config \ MPC8349ITX_LOWBOOT_config \ @@ -1733,7 +1733,7 @@ MPC8349ITXGP_config: unconfig @if [ "$(findstring LOWBOOT,$@)" ] ; then \ echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \ fi - @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx + @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale MPC8360EMDS_config \ MPC8360EMDS_HOST_33_config \ @@ -1758,7 +1758,7 @@ MPC8360EMDS_SLAVE_config: unconfig echo -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds + @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale sbc8349_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 diff --git a/board/freescale/mpc8313erdb/Makefile b/board/freescale/mpc8313erdb/Makefile new file mode 100644 index 0000000..a987e510 --- /dev/null +++ b/board/freescale/mpc8313erdb/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o sdram.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8313erdb/config.mk b/board/freescale/mpc8313erdb/config.mk new file mode 100644 index 0000000..f768264 --- /dev/null +++ b/board/freescale/mpc8313erdb/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c new file mode 100644 index 0000000..861c143 --- /dev/null +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -0,0 +1,121 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 + * + * Author: Scott Wood + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ +#ifndef CFG_8313ERDB_BROKEN_PMC + volatile immap_t *im = (immap_t *)CFG_IMMR; + + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + gd->flags |= GD_FLG_SILENT; +#endif + + return 0; +} + +int checkboard(void) +{ + puts("Board: Freescale MPC8313ERDB\n"); + return 0; +} + +static struct pci_region pci_regions[] = { + { + bus_start: CFG_PCI1_MEM_BASE, + phys_start: CFG_PCI1_MEM_PHYS, + size: CFG_PCI1_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CFG_PCI1_MMIO_BASE, + phys_start: CFG_PCI1_MMIO_PHYS, + size: CFG_PCI1_MMIO_SIZE, + flags: PCI_REGION_MEM + }, + { + bus_start: CFG_PCI1_IO_BASE, + phys_start: CFG_PCI1_IO_PHYS, + size: CFG_PCI1_IO_SIZE, + flags: PCI_REGION_IO + } +}; + +void pci_init_board(void) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; + volatile law83xx_t *pci_law = immr->sysconf.pcilaw; + struct pci_region *reg[] = { pci_regions }; + int warmboot; + + /* Enable all 3 PCI_CLK_OUTPUTs. */ + clk->occr |= 0xe0000000; + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; + + warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; +#ifndef CFG_8313ERDB_BROKEN_PMC + warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; +#endif + + mpc83xx_pci_init(1, reg, warmboot); +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c new file mode 100644 index 0000000..e6e8410 --- /dev/null +++ b/board/freescale/mpc8313erdb/sdram.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 + * + * Authors: Nick.Spence@freescale.com + * Wilson.Lo@freescale.com + * scottwood@freescale.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +#include + +#ifndef CFG_8313ERDB_BROKEN_PMC +static void resume_from_sleep(void) +{ + DECLARE_GLOBAL_DATA_PTR; + u32 magic = *(u32 *)0; + + typedef void (*func_t)(void); + func_t resume = *(func_t *)4; + + if (magic == 0xf5153ae5) + resume(); + + gd->flags &= ~GD_FLG_SILENT; + puts("\nResume from sleep failed: bad magic word\n"); +} +#endif + +/* Fixed sdram init -- doesn't use serial presence detect. + * + * This is useful for faster booting in configs where the RAM is unlikely + * to be changed, or for things like NAND booting where space is tight. + */ +static long fixed_sdram(void) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + u32 msize = CFG_DDR_SIZE * 1024 * 1024; + u32 msize_log2 = __ilog2(msize); + + im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; + im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); + im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; + + /* + * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], + * or the DDR2 controller may fail to initialize correctly. + */ + udelay(50000); + + im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + + /* Currently we use only one CS, so disable the other bank. */ + im->ddr.cs_config[1] = 0; + + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + +#ifndef CFG_8313ERDB_BROKEN_PMC + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + im->ddr.sdram_cfg = CFG_SDRAM_CFG | SDRAM_CFG_BI; + else +#endif + im->ddr.sdram_cfg = CFG_SDRAM_CFG; + + im->ddr.sdram_cfg2 = CFG_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE_2; + + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + sync(); + + /* enable DDR controller */ + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return msize; +} + +long int initdram(int board_type) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile lbus83xx_t *lbc = &im->lbus; + u32 msize; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + msize = fixed_sdram(); + + /* Local Bus setup lbcr and mrtpr */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + sync(); + +#ifndef CFG_8313ERDB_BROKEN_PMC + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + resume_from_sleep(); +#endif + + /* return total bus SDRAM size(bytes) -- DDR */ + return msize; +} diff --git a/board/freescale/mpc832xemds/Makefile b/board/freescale/mpc832xemds/Makefile new file mode 100644 index 0000000..ea52484 --- /dev/null +++ b/board/freescale/mpc832xemds/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc832xemds/config.mk b/board/freescale/mpc832xemds/config.mk new file mode 100644 index 0000000..6c3eca7 --- /dev/null +++ b/board/freescale/mpc832xemds/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC832XEMDS +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c new file mode 100644 index 0000000..6ba25d4 --- /dev/null +++ b/board/freescale/mpc832xemds/mpc832xemds.c @@ -0,0 +1,187 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_PCI) +#include +#endif +#if defined(CONFIG_SPD_EEPROM) +#include +#else +#include +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../common/pq-mds-pib.h" +#endif + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* ETH3 */ + {1, 0, 1, 0, 1}, /* TxD0 */ + {1, 1, 1, 0, 1}, /* TxD1 */ + {1, 2, 1, 0, 1}, /* TxD2 */ + {1, 3, 1, 0, 1}, /* TxD3 */ + {1, 9, 1, 0, 1}, /* TxER */ + {1, 12, 1, 0, 1}, /* TxEN */ + {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ + + {1, 4, 2, 0, 1}, /* RxD0 */ + {1, 5, 2, 0, 1}, /* RxD1 */ + {1, 6, 2, 0, 1}, /* RxD2 */ + {1, 7, 2, 0, 1}, /* RxD3 */ + {1, 8, 2, 0, 1}, /* RxER */ + {1, 10, 2, 0, 1}, /* RxDV */ + {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ + {1, 11, 2, 0, 1}, /* COL */ + {1, 13, 2, 0, 1}, /* CRS */ + + /* ETH4 */ + {1, 18, 1, 0, 1}, /* TxD0 */ + {1, 19, 1, 0, 1}, /* TxD1 */ + {1, 20, 1, 0, 1}, /* TxD2 */ + {1, 21, 1, 0, 1}, /* TxD3 */ + {1, 27, 1, 0, 1}, /* TxER */ + {1, 30, 1, 0, 1}, /* TxEN */ + {3, 6, 2, 0, 1}, /* TxCLK->CLK8 */ + + {1, 22, 2, 0, 1}, /* RxD0 */ + {1, 23, 2, 0, 1}, /* RxD1 */ + {1, 24, 2, 0, 1}, /* RxD2 */ + {1, 25, 2, 0, 1}, /* RxD3 */ + {1, 26, 1, 0, 1}, /* RxER */ + {1, 28, 2, 0, 1}, /* Rx_DV */ + {3, 31, 2, 0, 1}, /* RxCLK->CLK7 */ + {1, 29, 2, 0, 1}, /* COL */ + {1, 31, 2, 0, 1}, /* CRS */ + + {3, 4, 3, 0, 2}, /* MDIO */ + {3, 5, 1, 0, 2}, /* MDC */ + + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + +int board_early_init_f(void) +{ + volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; + + /* Enable flash write */ + bcsr[9] &= ~0x08; + + return 0; +} + +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + +int fixed_sdram(void); + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + + msize = fixed_sdram(); + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); +#if (CFG_DDR_SIZE != 128) +#warning Currenly any ddr size other than 128 is not supported +#endif + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + __asm__ __volatile__ ("sync"); + udelay(200); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + __asm__ __volatile__ ("sync"); + return msize; +} + +int checkboard(void) +{ + puts("Board: Freescale MPC832XEMDS\n"); + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc832xemds/pci.c b/board/freescale/mpc832xemds/pci.c new file mode 100644 index 0000000..6bc35c7 --- /dev/null +++ b/board/freescale/mpc832xemds/pci.c @@ -0,0 +1,298 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/* + * PCI Configuration space access support for MPC83xx PCI Bridge + */ +#include +#include +#include +#include +#include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_PCI) +#define PCI_FUNCTION_CONFIG 0x44 +#define PCI_FUNCTION_CFG_LOCK 0x20 + +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxemds_config_table[] = { + { + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + pci_cfgfunc_config_device, + {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif +static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxemds_config_table, +#endif + }, +}; + +/********************************************************************** + * pci_init_board() + *********************************************************************/ +void pci_init_board(void) +#ifdef CONFIG_PCISLAVE +{ + u16 reg16; + volatile immap_t *immr; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + immr = (immap_t *) CFG_IMMR; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar0 = 0x0; + pci_ctrl[0].pibar0 = 0x0; + pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | PIWAR_IWS_4K; + + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 &= ~PIWAR_EN; + + pci_ctrl[0].pitar2 = 0x0; + pci_ctrl[0].pibar2 = 0x0; + pci_ctrl[0].piebar2 = 0x0; + pci_ctrl[0].piwar2 &= ~PIWAR_EN; + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + reg16 = 0xff; + + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), + PCI_LATENCY_TIMER, 0x80); + + /* + * Unlock configuration lock in PCI function configuration register. + */ + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, ®16); + reg16 &= ~(PCI_FUNCTION_CFG_LOCK); + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, reg16); + + printf("Enabled PCI 32bit Agent Mode\n"); +} +#else +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + u16 reg16; + u32 val32; + u32 dev; + + immr = (immap_t *) CFG_IMMR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + val32 = clk->occr; + udelay(2000); +#if defined(PCI_66M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#elif defined(PCI_33M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | + OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; + printf("PCI clock is 33MHz\n"); +#else + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#endif + udelay(2000); + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; + + pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = + POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI mmio - non-prefetch mem space */ + pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI IO space */ + pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; + pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + PIWAR_IWS_2G; + + /* + * Release PCI RST Output signal + */ + udelay(2000); + pci_ctrl[0].gcr = 1; + udelay(2000); + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose[0].regions + 0, + CFG_PCI_MEM_BASE, + CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose[0].regions + 1, + CFG_PCI_MMIO_BASE, + CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose[0].regions + 2, + CFG_PCI_IO_BASE, + CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose[0].regions + 3, + CFG_PCI_SLV_MEM_LOCAL, + CFG_PCI_SLV_MEM_BUS, + CFG_PCI_SLV_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose[0].region_count = 4; + + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + + pci_register_hose(hose); + + /* + * Write command register + */ + reg16 = 0xff; + dev = PCI_BDF(0, 0, 0); + pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCISLAVE */ + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(hose[0].first_busno); + tmp[1] = cpu_to_be32(hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = hose[0].first_busno; + p[1] = hose[0].last_busno; + } +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8349emds/Makefile b/board/freescale/mpc8349emds/Makefile new file mode 100644 index 0000000..5ec7a87 --- /dev/null +++ b/board/freescale/mpc8349emds/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8349emds/config.mk b/board/freescale/mpc8349emds/config.mk new file mode 100644 index 0000000..edf64d1 --- /dev/null +++ b/board/freescale/mpc8349emds/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8349EMDS +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c new file mode 100644 index 0000000..39c0916 --- /dev/null +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -0,0 +1,274 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_SPD_EEPROM) +#include +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + +int fixed_sdram(void); +void sdram_init(void); + +#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX) +void ddr_enable_ecc(unsigned int dram_size); +#endif + +int board_early_init_f (void) +{ + volatile u8* bcsr = (volatile u8*)CFG_BCSR; + + /* Enable flash write */ + bcsr[1] &= ~0x01; + +#ifdef CFG_USE_MPC834XSYS_USB_PHY + /* Use USB PHY on SYS board */ + bcsr[5] |= 0x02; +#endif + + return 0; +} + +#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) + +long int initdram (int board_type) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#if defined(CONFIG_SPD_EEPROM) + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + /* + * Initialize SDRAM if it is on local bus. + */ + sdram_init(); + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize and enable DDR ECC. + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); + ddr_size = ddr_size>>1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff); + im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + +#if (CFG_DDR_SIZE != 256) +#warning Currenly any ddr size other than 256 is not supported +#endif +#ifdef CONFIG_DDR_II + im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS; + im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; +#else + im->ddr.csbnds[2].csbnds = 0x0000000f; + im->ddr.cs_config[2] = CFG_DDR_CONFIG; + + /* currently we use only one CS, so disable the other banks */ + im->ddr.cs_config[0] = 0; + im->ddr.cs_config[1] = 0; + im->ddr.cs_config[3] = 0; + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + + im->ddr.sdram_cfg = + SDRAM_CFG_SREN +#if defined(CONFIG_DDR_2T_TIMING) + | SDRAM_CFG_2T_EN +#endif + | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; +#if defined (CONFIG_DDR_32BIT) + /* for 32-bit mode burst length is 8 */ + im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); +#endif + im->ddr.sdram_mode = CFG_DDR_MODE; + + im->ddr.sdram_interval = CFG_DDR_INTERVAL; +#endif + udelay(200); + + /* enable DDR controller */ + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + return msize; +} +#endif/*!CFG_SPD_EEPROM*/ + + +int checkboard (void) +{ + puts("Board: Freescale MPC8349EMDS\n"); + return 0; +} + +/* + * if MPC8349EMDS is soldered with SDRAM + */ +#if defined(CFG_BR2_PRELIM) \ + && defined(CFG_OR2_PRELIM) \ + && defined(CFG_LBLAWBAR2_PRELIM) \ + && defined(CFG_LBLAWAR2_PRELIM) +/* + * Initialize SDRAM memory on the Local Bus. + */ + +void sdram_init(void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile lbus83xx_t *lbc= &immap->lbus; + uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + + /* + * Setup SDRAM Base and Option Registers, already done in cpu_init.c + */ + + /* setup mtrpt, lsrt and lbcr for LB bus */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + + /* + * Configure the SDRAM controller Machine Mode Register. + */ + lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + + lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */ + asm("sync"); + /*1 times*/ + *sdram_addr = 0xff; + udelay(100); + /*2 times*/ + *sdram_addr = 0xff; + udelay(100); + /*3 times*/ + *sdram_addr = 0xff; + udelay(100); + /*4 times*/ + *sdram_addr = 0xff; + udelay(100); + /*5 times*/ + *sdram_addr = 0xff; + udelay(100); + /*6 times*/ + *sdram_addr = 0xff; + udelay(100); + /*7 times*/ + *sdram_addr = 0xff; + udelay(100); + /*8 times*/ + *sdram_addr = 0xff; + udelay(100); + + /* 0x58636733; mode register write operation */ + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); +} +#else +void sdram_init(void) +{ +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c new file mode 100644 index 0000000..ae94a2f --- /dev/null +++ b/board/freescale/mpc8349emds/pci.c @@ -0,0 +1,446 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_PCI + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc8349emds_config_table[] = { + {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_IDSEL_NUMBER, PCI_ANY_ID, + pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + } + }, + {} +}; +#endif + +static struct pci_controller pci_hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349emds_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349emds_config_table, +#endif + } +}; + +/************************************************************************** + * + * pib_init() -- initialize the PCA9555PW IO expander on the PIB board + * + */ +void +pib_init(void) +{ + u8 val8, orig_i2c_bus; + /* + * Assign PIB PMC slot to desired PCI bus + */ + /* Switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + val8 = 0; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(PCI_64BIT) + val8 = 0xf4; /* PMC2:PCI1/64-bit */ +#elif defined(PCI_ALL_PCI1) + val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */ +#elif defined(PCI_ONE_PCI1) + val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */ +#else + val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */ +#endif + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + asm("eieio"); + +#if defined(PCI_64BIT) + printf("PCI1: 64-bit on PMC2\n"); +#elif defined(PCI_ALL_PCI1) + printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n"); +#elif defined(PCI_ONE_PCI1) + printf("PCI1: 32-bit on PMC1\n"); + printf("PCI2: 32-bit on PMC2, PMC3\n"); +#else + printf("PCI1: 32-bit on PMC1, PMC2\n"); + printf("PCI2: 32-bit on PMC3\n"); +#endif + /* Reset to original I2C bus */ + i2c_set_bus_num(orig_i2c_bus); +} + +/************************************************************************** + * pci_init_board() + * + * NOTICE: PCI2 is not currently supported + * + */ +void +pci_init_board(void) +{ + volatile immap_t * immr; + volatile clk83xx_t * clk; + volatile law83xx_t * pci_law; + volatile pot83xx_t * pci_pot; + volatile pcictrl83xx_t * pci_ctrl; + volatile pciconf83xx_t * pci_conf; + u16 reg16; + u32 reg32; + u32 dev; + struct pci_controller * hose; + + immr = (immap_t *)CFG_IMMR; + clk = (clk83xx_t *)&immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci_hose[0]; + + pib_init(); + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + + reg32 = clk->occr; + udelay(2000); + clk->occr = 0xff000000; + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + +#ifdef CONFIG_MPC83XX_PCI2 + pci_ctrl[1].gcr = 0; + udelay(2000); + pci_ctrl[1].gcr = 1; +#endif + + /* We need to wait at least a 1sec based on PCI specs */ + { + int i; + + for (i = 0; i < 1000; ++i) + udelay (1000); + } + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI1 mmio - non-prefetch mem space */ + pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MMIO_BASE, + CFG_PCI1_MMIO_PHYS, + CFG_PCI1_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR+0x8300), + (CFG_IMMR+0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); + +#ifdef CONFIG_MPC83XX_PCI2 + hose = &pci_hose[1]; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI2 mem space - prefetch */ + pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI2 IO space */ + pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI2 mmio - non-prefetch mem space */ + pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[1].pitar1 = 0x0; + pci_ctrl[1].pibar1 = 0x0; + pci_ctrl[1].piebar1 = 0x0; + pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = pci_hose[0].last_busno + 1; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MMIO_BASE, + CFG_PCI2_MMIO_PHYS, + CFG_PCI2_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, + CFG_PCI2_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR+0x8380), + (CFG_IMMR+0x8384)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +#endif + +} + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[0].first_busno); + tmp[1] = cpu_to_be32(pci_hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#ifdef CONFIG_MPC83XX_PCI2 + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[1].first_busno); + tmp[1] = cpu_to_be32(pci_hose[1].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#endif +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[0].first_busno; + p[1] = pci_hose[0].last_busno; + } + +#ifdef CONFIG_MPC83XX_PCI2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[1].first_busno; + p[1] = pci_hose[1].last_busno; + } +#endif +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8349itx/Makefile b/board/freescale/mpc8349itx/Makefile new file mode 100644 index 0000000..31bcdb8 --- /dev/null +++ b/board/freescale/mpc8349itx/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8349itx/config.mk b/board/freescale/mpc8349itx/config.mk new file mode 100644 index 0000000..79f1765 --- /dev/null +++ b/board/freescale/mpc8349itx/config.mk @@ -0,0 +1,31 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8349E-mITX and MPC8349E-mITX-GP +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0xFEF00000 +endif diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c new file mode 100644 index 0000000..c82f784 --- /dev/null +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -0,0 +1,407 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PCI +#include +#include +#endif + +#ifdef CONFIG_SPD_EEPROM +#include +#else +#include +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + +#ifndef CONFIG_SPD_EEPROM +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 ddr_size; /* The size of RAM, in bytes */ + u32 ddr_size_log2 = 0; + + for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { + if (ddr_size & 1) { + return -1; + } + ddr_size_log2++; + } + + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff; + + /* Only one CS0 for DDR */ + im->ddr.csbnds[0].csbnds = 0x0000000f; + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + + debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); + debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); + + debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); + debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ + im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; + im->ddr.sdram_mode = + (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); + im->ddr.sdram_interval = + (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << + SDRAM_INTERVAL_BSTOPRE_SHIFT); + im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; + + udelay(200); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1); + debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2); + debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode); + debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); + debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); + + return CFG_DDR_SIZE; +} +#endif + +#ifdef CONFIG_PCI +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxmitx_config_table[] = { + { + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + 0x0f, + PCI_ANY_ID, + pci_cfgfunc_config_device, + { + PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif + +volatile static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxmitx_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxmitx_config_table, +#endif + } +}; +#endif /* CONFIG_PCI */ + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; +#ifdef CONFIG_DDR_ECC + volatile ddr83xx_t *ddr = &im->ddr; +#endif + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#ifdef CONFIG_SPD_EEPROM + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + +#ifdef CONFIG_DDR_ECC + if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) + /* Unlike every other board, on the 83xx spd_sdram() returns + megabytes instead of just bytes. That's why we need to + multiple by 1MB when calling ddr_enable_ecc(). */ + ddr_enable_ecc(msize * 1048576); +#endif + + /* return total bus RAM size(bytes) */ + return msize * 1024 * 1024; +} + +int checkboard(void) +{ +#ifdef CONFIG_MPC8349ITX + puts("Board: Freescale MPC8349E-mITX\n"); +#else + puts("Board: Freescale MPC8349E-mITX-GP\n"); +#endif + + return 0; +} + +/* + * Implement a work-around for a hardware problem with compact + * flash. + * + * Program the UPM if compact flash is enabled. + */ +int misc_init_f(void) +{ +#ifdef CONFIG_VSC7385 + volatile u32 *vsc7385_cpuctrl; + + /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up + default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That + means it is 0 when the IRQ is not active. This makes the wire-AND + logic always assert IRQ7 to CPU even if there is no request from the + switch. Since the compact flash and the switch share the same IRQ, + the Linux kernel will think that the compact flash is requesting irq + and get stuck when it tries to clear the IRQ. Thus we need to set + the L2_IRQ0 and L2_IRQ1 to active low. + + The following code sets the L1_IRQ and L2_IRQ polarity to active low. + Without this code, compact flash will not work in Linux because + unlike U-Boot, Linux uses the IRQ, so this code is necessary if we + don't enable compact flash for U-Boot. + */ + + vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0); + *vsc7385_cpuctrl |= 0x0c; +#endif + +#ifdef CONFIG_COMPACT_FLASH + /* UPM Table Configuration Code */ + static uint UPMATable[] = { + 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00, + 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00, + 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 + }; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile lbus83xx_t *lbus = &immap->lbus; + + lbus->bank[3].br = CFG_BR3_PRELIM; + lbus->bank[3].or = CFG_OR3_PRELIM; + + /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, + GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 + */ + lbus->mamr = 0x08404440; + + upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); + + puts("UPMA: Configured for compact flash\n"); +#endif + + return 0; +} + +/* + * Make sure the EEPROM has the HRCW correctly programmed. + * Make sure the RTC is correctly programmed. + * + * The MPC8349E-mITX can be configured to load the HRCW from + * EEPROM instead of flash. This is controlled via jumpers + * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all + * jumpered), but if they're set to 001 or 010, then the HRCW is + * read from the "I2C EEPROM". + * + * This function makes sure that the I2C EEPROM is programmed + * correctly. + */ +int misc_init_r(void) +{ + int rc = 0; + +#ifdef CONFIG_HARD_I2C + + unsigned int orig_bus = i2c_get_bus_num(); + u8 i2c_data; + +#ifdef CFG_I2C_RTC_ADDR + u8 ds1339_data[17]; +#endif + +#ifdef CFG_I2C_EEPROM_ADDR + static u8 eeprom_data[] = /* HRCW data */ + { + 0xAA, 0x55, 0xAA, /* Preamble */ + 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ + 0x02, 0x40, /* RCWL ADDR=0x0_0900 */ + (CFG_HRCW_LOW >> 24) & 0xFF, + (CFG_HRCW_LOW >> 16) & 0xFF, + (CFG_HRCW_LOW >> 8) & 0xFF, + CFG_HRCW_LOW & 0xFF, + 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ + 0x02, 0x41, /* RCWH ADDR=0x0_0904 */ + (CFG_HRCW_HIGH >> 24) & 0xFF, + (CFG_HRCW_HIGH >> 16) & 0xFF, + (CFG_HRCW_HIGH >> 8) & 0xFF, + CFG_HRCW_HIGH & 0xFF + }; + + u8 data[sizeof(eeprom_data)]; +#endif + + printf("Board revision: "); + i2c_set_bus_num(1); + if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); + else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); + else { + printf("Unknown\n"); + rc = 1; + } + +#ifdef CFG_I2C_EEPROM_ADDR + i2c_set_bus_num(0); + + if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { + if (memcmp(data, eeprom_data, sizeof(data)) != 0) { + if (i2c_write + (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data, + sizeof(eeprom_data)) != 0) { + puts("Failure writing the HRCW to EEPROM via I2C.\n"); + rc = 1; + } + } + } else { + puts("Failure reading the HRCW from EEPROM via I2C.\n"); + rc = 1; + } +#endif + +#ifdef CFG_I2C_RTC_ADDR + i2c_set_bus_num(1); + + if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) + == 0) { + + /* Work-around for MPC8349E-mITX bug #13601. + If the RTC does not contain valid register values, the DS1339 + Linux driver will not work. + */ + + /* Make sure status register bits 6-2 are zero */ + ds1339_data[0x0f] &= ~0x7c; + + /* Check for a valid day register value */ + ds1339_data[0x03] &= ~0xf8; + if (ds1339_data[0x03] == 0) { + ds1339_data[0x03] = 1; + } + + /* Check for a valid date register value */ + ds1339_data[0x04] &= ~0xc0; + if ((ds1339_data[0x04] == 0) || + ((ds1339_data[0x04] & 0x0f) > 9) || + (ds1339_data[0x04] >= 0x32)) { + ds1339_data[0x04] = 1; + } + + /* Check for a valid month register value */ + ds1339_data[0x05] &= ~0x60; + + if ((ds1339_data[0x05] == 0) || + ((ds1339_data[0x05] & 0x0f) > 9) || + ((ds1339_data[0x05] >= 0x13) + && (ds1339_data[0x05] <= 0x19))) { + ds1339_data[0x05] = 1; + } + + /* Enable Oscillator and rate select */ + ds1339_data[0x0e] = 0x1c; + + /* Work-around for MPC8349E-mITX bug #13330. + Ensure that the RTC control register contains the value 0x1c. + This affects SATA performance. + */ + + if (i2c_write + (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, + sizeof(ds1339_data))) { + puts("Failure writing to the RTC via I2C.\n"); + rc = 1; + } + } else { + puts("Failure reading from the RTC via I2C.\n"); + rc = 1; + } +#endif + + i2c_set_bus_num(orig_bus); +#endif + + return rc; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c new file mode 100644 index 0000000..5ca094d --- /dev/null +++ b/board/freescale/mpc8349itx/pci.c @@ -0,0 +1,392 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#ifdef CONFIG_PCI + +#include +#include +#include +#include +#include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc8349itx_config_table[] = { + { + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_IDSEL_NUMBER, + PCI_ANY_ID, + pci_cfgfunc_config_device, + { + PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} + }, + {} +}; +#endif + +static struct pci_controller pci_hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349itx_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349itx_config_table, +#endif + } +}; + +/************************************************************************** + * pci_init_board() + * + * NOTICE: PCI2 is not currently supported + * + */ +void pci_init_board(void) +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + u8 reg8; + u16 reg16; + u32 reg32; + u32 dev; + struct pci_controller *hose; + + immr = (immap_t *) CFG_IMMR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci_hose[0]; + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + + reg32 = clk->occr; + udelay(2000); + +#ifdef CONFIG_HARD_I2C + i2c_set_bus_num(1); + /* Read the PCI_M66EN jumper setting */ + if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || + (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { + if (reg8 & I2C_8574_PCI66) + clk->occr = 0xff000000; /* 66 MHz PCI */ + else + clk->occr = 0xff600001; /* 33 MHz PCI */ + } else { + clk->occr = 0xff600001; /* 33 MHz PCI */ + } +#else + clk->occr = 0xff000000; /* 66 MHz PCI */ +#endif + + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + +#ifdef CONFIG_MPC83XX_PCI2 + pci_ctrl[1].gcr = 0; + udelay(2000); + pci_ctrl[1].gcr = 1; +#endif + + /* We need to wait at least a 1sec based on PCI specs */ + { + int i; + + for (i = 0; i < 1000; i++) + udelay(1000); + } + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M; + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M; + + /* PCI1 mmio - non-prefetch mem space */ + pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M; + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MMIO_BASE, + CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); + +#ifdef CONFIG_MPC83XX_PCI2 + hose = &pci_hose[1]; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI2 mem space - prefetch */ + pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M; + + /* PCI2 IO space */ + pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M; + + /* PCI2 mmio - non-prefetch mem space */ + pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M; + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[1].pitar1 = 0x0; + pci_ctrl[1].pibar1 = 0x0; + pci_ctrl[1].piebar1 = 0x0; + pci_ctrl[1].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + (__ilog2(gd->ram_size) - 1); + + hose->first_busno = pci_hose[0].last_busno + 1; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MMIO_BASE, + CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +#endif +} + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[0].first_busno); + tmp[1] = cpu_to_be32(pci_hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#ifdef CONFIG_MPC83XX_PCI2 + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[1].first_busno); + tmp[1] = cpu_to_be32(pci_hose[1].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#endif +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[0].first_busno; + p[1] = pci_hose[0].last_busno; + } + +#ifdef CONFIG_MPC83XX_PCI2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[1].first_busno; + p[1] = pci_hose[1].last_busno; + } +#endif +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8360emds/Makefile b/board/freescale/mpc8360emds/Makefile new file mode 100644 index 0000000..ea52484 --- /dev/null +++ b/board/freescale/mpc8360emds/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8360emds/config.mk b/board/freescale/mpc8360emds/config.mk new file mode 100644 index 0000000..9ace886 --- /dev/null +++ b/board/freescale/mpc8360emds/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8360EMDS +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c new file mode 100644 index 0000000..e050cd4 --- /dev/null +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -0,0 +1,313 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_PCI) +#include +#endif +#if defined(CONFIG_SPD_EEPROM) +#include +#else +#include +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../common/pq-mds-pib.h" +#endif + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* GETH1 */ + {0, 3, 1, 0, 1}, /* TxD0 */ + {0, 4, 1, 0, 1}, /* TxD1 */ + {0, 5, 1, 0, 1}, /* TxD2 */ + {0, 6, 1, 0, 1}, /* TxD3 */ + {1, 6, 1, 0, 3}, /* TxD4 */ + {1, 7, 1, 0, 1}, /* TxD5 */ + {1, 9, 1, 0, 2}, /* TxD6 */ + {1, 10, 1, 0, 2}, /* TxD7 */ + {0, 9, 2, 0, 1}, /* RxD0 */ + {0, 10, 2, 0, 1}, /* RxD1 */ + {0, 11, 2, 0, 1}, /* RxD2 */ + {0, 12, 2, 0, 1}, /* RxD3 */ + {0, 13, 2, 0, 1}, /* RxD4 */ + {1, 1, 2, 0, 2}, /* RxD5 */ + {1, 0, 2, 0, 2}, /* RxD6 */ + {1, 4, 2, 0, 2}, /* RxD7 */ + {0, 7, 1, 0, 1}, /* TX_EN */ + {0, 8, 1, 0, 1}, /* TX_ER */ + {0, 15, 2, 0, 1}, /* RX_DV */ + {0, 16, 2, 0, 1}, /* RX_ER */ + {0, 0, 2, 0, 1}, /* RX_CLK */ + {2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */ + {2, 8, 2, 0, 1}, /* GTX125 - CLK9 */ + /* GETH2 */ + {0, 17, 1, 0, 1}, /* TxD0 */ + {0, 18, 1, 0, 1}, /* TxD1 */ + {0, 19, 1, 0, 1}, /* TxD2 */ + {0, 20, 1, 0, 1}, /* TxD3 */ + {1, 2, 1, 0, 1}, /* TxD4 */ + {1, 3, 1, 0, 2}, /* TxD5 */ + {1, 5, 1, 0, 3}, /* TxD6 */ + {1, 8, 1, 0, 3}, /* TxD7 */ + {0, 23, 2, 0, 1}, /* RxD0 */ + {0, 24, 2, 0, 1}, /* RxD1 */ + {0, 25, 2, 0, 1}, /* RxD2 */ + {0, 26, 2, 0, 1}, /* RxD3 */ + {0, 27, 2, 0, 1}, /* RxD4 */ + {1, 12, 2, 0, 2}, /* RxD5 */ + {1, 13, 2, 0, 3}, /* RxD6 */ + {1, 11, 2, 0, 2}, /* RxD7 */ + {0, 21, 1, 0, 1}, /* TX_EN */ + {0, 22, 1, 0, 1}, /* TX_ER */ + {0, 29, 2, 0, 1}, /* RX_DV */ + {0, 30, 2, 0, 1}, /* RX_ER */ + {0, 31, 2, 0, 1}, /* RX_CLK */ + {2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */ + {2, 3, 2, 0, 1}, /* GTX125 - CLK4 */ + + {0, 1, 3, 0, 2}, /* MDIO */ + {0, 2, 1, 0, 1}, /* MDC */ + + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + +int board_early_init_f(void) +{ + + u8 *bcsr = (u8 *)CFG_BCSR; + const immap_t *immr = (immap_t *)CFG_IMMR; + + /* Enable flash write */ + bcsr[0xa] &= ~0x04; + + /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */ + if (immr->sysconf.spridr == SPR_8360_REV20 || + immr->sysconf.spridr == SPR_8360E_REV20 || + immr->sysconf.spridr == SPR_8360_REV21 || + immr->sysconf.spridr == SPR_8360E_REV21) + bcsr[0xe] = 0x30; + + return 0; +} + +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif +int fixed_sdram(void); +void sdram_init(void); + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#if defined(CONFIG_SPD_EEPROM) + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) + /* + * Initialize DDR ECC byte + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + /* + * Initialize SDRAM if it is on local bus. + */ + sdram_init(); + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); +#if (CFG_DDR_SIZE != 256) +#warning Currenly any ddr size other than 256 is not supported +#endif +#ifdef CONFIG_DDR_II + im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; +#else + im->ddr.csbnds[0].csbnds = 0x00000007; + im->ddr.csbnds[1].csbnds = 0x0008000f; + + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + im->ddr.cs_config[1] = CFG_DDR_CONFIG; + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.sdram_cfg = CFG_DDR_CONTROL; + + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; +#endif + udelay(200); + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return msize; +} +#endif /*!CFG_SPD_EEPROM */ + +int checkboard(void) +{ + puts("Board: Freescale MPC8360EMDS\n"); + return 0; +} + +/* + * if MPC8360EMDS is soldered with SDRAM + */ +#if defined(CFG_BR2_PRELIM) \ + && defined(CFG_OR2_PRELIM) \ + && defined(CFG_LBLAWBAR2_PRELIM) \ + && defined(CFG_LBLAWAR2_PRELIM) +/* + * Initialize SDRAM memory on the Local Bus. + */ + +void sdram_init(void) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile lbus83xx_t *lbc = &immap->lbus; + uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; + + /* + * Setup SDRAM Base and Option Registers, already done in cpu_init.c + */ + /*setup mtrpt, lsrt and lbcr for LB bus */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + + /* + * Configure the SDRAM controller Machine Mode Register. + */ + lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */ + lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + /* + * We need do 8 times auto refresh operation. + */ + lbc->lsdmr = CFG_LBC_LSDMR_2; + asm("sync"); + *sdram_addr = 0xff; /* 1 times */ + udelay(100); + *sdram_addr = 0xff; /* 2 times */ + udelay(100); + *sdram_addr = 0xff; /* 3 times */ + udelay(100); + *sdram_addr = 0xff; /* 4 times */ + udelay(100); + *sdram_addr = 0xff; /* 5 times */ + udelay(100); + *sdram_addr = 0xff; /* 6 times */ + udelay(100); + *sdram_addr = 0xff; /* 7 times */ + udelay(100); + *sdram_addr = 0xff; /* 8 times */ + udelay(100); + + /* Mode register write operation */ + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + *(sdram_addr + 0xcc) = 0xff; + udelay(100); + + /* Normal operation */ + lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000; + asm("sync"); + *sdram_addr = 0xff; + udelay(100); +} +#else +void sdram_init(void) +{ +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8360emds/pci.c b/board/freescale/mpc8360emds/pci.c new file mode 100644 index 0000000..cf7ef90 --- /dev/null +++ b/board/freescale/mpc8360emds/pci.c @@ -0,0 +1,298 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/* + * PCI Configuration space access support for MPC83xx PCI Bridge + */ +#include +#include +#include +#include +#include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_PCI) +#define PCI_FUNCTION_CONFIG 0x44 +#define PCI_FUNCTION_CFG_LOCK 0x20 + +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxemds_config_table[] = { + { + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + pci_cfgfunc_config_device, + {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif +static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxemds_config_table, +#endif + }, +}; + +/********************************************************************** + * pci_init_board() + *********************************************************************/ +void pci_init_board(void) +#ifdef CONFIG_PCISLAVE +{ + u16 reg16; + volatile immap_t *immr; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + immr = (immap_t *) CFG_IMMR; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar0 = 0x0; + pci_ctrl[0].pibar0 = 0x0; + pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | PIWAR_IWS_4K; + + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 &= ~PIWAR_EN; + + pci_ctrl[0].pitar2 = 0x0; + pci_ctrl[0].pibar2 = 0x0; + pci_ctrl[0].piebar2 = 0x0; + pci_ctrl[0].piwar2 &= ~PIWAR_EN; + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + reg16 = 0xff; + + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), + PCI_LATENCY_TIMER, 0x80); + + /* + * Unlock configuration lock in PCI function configuration register. + */ + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, ®16); + reg16 &= ~(PCI_FUNCTION_CFG_LOCK); + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, reg16); + + printf("Enabled PCI 32bit Agent Mode\n"); +} +#else +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + u16 reg16; + u32 val32; + u32 dev; + + immr = (immap_t *) CFG_IMMR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + val32 = clk->occr; + udelay(2000); +#if defined(PCI_66M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#elif defined(PCI_33M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | + OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; + printf("PCI clock is 33MHz\n"); +#else + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#endif + udelay(2000); + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; + + pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = + POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI mmio - non-prefetch mem space */ + pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI IO space */ + pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; + pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + PIWAR_IWS_2G; + + /* + * Release PCI RST Output signal + */ + udelay(2000); + pci_ctrl[0].gcr = 1; + udelay(2000); + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose[0].regions + 0, + CFG_PCI_MEM_BASE, + CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose[0].regions + 1, + CFG_PCI_MMIO_BASE, + CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose[0].regions + 2, + CFG_PCI_IO_BASE, + CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose[0].regions + 3, + CFG_PCI_SLV_MEM_LOCAL, + CFG_PCI_SLV_MEM_BUS, + CFG_PCI_SLV_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose[0].region_count = 4; + + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + + pci_register_hose(hose); + + /* + * Write command register + */ + reg16 = 0xff; + dev = PCI_BDF(0, 0, 0); + pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCISLAVE */ + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(hose[0].first_busno); + tmp[1] = cpu_to_be32(hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = hose[0].first_busno; + p[1] = hose[0].last_busno; + } +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/mpc8313erdb/Makefile b/board/mpc8313erdb/Makefile deleted file mode 100644 index a987e510..0000000 --- a/board/mpc8313erdb/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o sdram.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) crv $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc8313erdb/config.mk b/board/mpc8313erdb/config.mk deleted file mode 100644 index f768264..0000000 --- a/board/mpc8313erdb/config.mk +++ /dev/null @@ -1 +0,0 @@ -TEXT_BASE = 0xFE000000 diff --git a/board/mpc8313erdb/mpc8313erdb.c b/board/mpc8313erdb/mpc8313erdb.c deleted file mode 100644 index 861c143..0000000 --- a/board/mpc8313erdb/mpc8313erdb.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 - * - * Author: Scott Wood - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ -#ifndef CFG_8313ERDB_BROKEN_PMC - volatile immap_t *im = (immap_t *)CFG_IMMR; - - if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) - gd->flags |= GD_FLG_SILENT; -#endif - - return 0; -} - -int checkboard(void) -{ - puts("Board: Freescale MPC8313ERDB\n"); - return 0; -} - -static struct pci_region pci_regions[] = { - { - bus_start: CFG_PCI1_MEM_BASE, - phys_start: CFG_PCI1_MEM_PHYS, - size: CFG_PCI1_MEM_SIZE, - flags: PCI_REGION_MEM | PCI_REGION_PREFETCH - }, - { - bus_start: CFG_PCI1_MMIO_BASE, - phys_start: CFG_PCI1_MMIO_PHYS, - size: CFG_PCI1_MMIO_SIZE, - flags: PCI_REGION_MEM - }, - { - bus_start: CFG_PCI1_IO_BASE, - phys_start: CFG_PCI1_IO_PHYS, - size: CFG_PCI1_IO_SIZE, - flags: PCI_REGION_IO - } -}; - -void pci_init_board(void) -{ - volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; - volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; - volatile law83xx_t *pci_law = immr->sysconf.pcilaw; - struct pci_region *reg[] = { pci_regions }; - int warmboot; - - /* Enable all 3 PCI_CLK_OUTPUTs. */ - clk->occr |= 0xe0000000; - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; - - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; - - warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; -#ifndef CFG_8313ERDB_BROKEN_PMC - warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; -#endif - - mpc83xx_pci_init(1, reg, warmboot); -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_OF_FLAT_TREE) - u32 *p; - int len; - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -#endif - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/board/mpc8313erdb/sdram.c b/board/mpc8313erdb/sdram.c deleted file mode 100644 index e6e8410..0000000 --- a/board/mpc8313erdb/sdram.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 - * - * Authors: Nick.Spence@freescale.com - * Wilson.Lo@freescale.com - * scottwood@freescale.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#include -#include - -#include - -#ifndef CFG_8313ERDB_BROKEN_PMC -static void resume_from_sleep(void) -{ - DECLARE_GLOBAL_DATA_PTR; - u32 magic = *(u32 *)0; - - typedef void (*func_t)(void); - func_t resume = *(func_t *)4; - - if (magic == 0xf5153ae5) - resume(); - - gd->flags &= ~GD_FLG_SILENT; - puts("\nResume from sleep failed: bad magic word\n"); -} -#endif - -/* Fixed sdram init -- doesn't use serial presence detect. - * - * This is useful for faster booting in configs where the RAM is unlikely - * to be changed, or for things like NAND booting where space is tight. - */ -static long fixed_sdram(void) -{ - volatile immap_t *im = (volatile immap_t *)CFG_IMMR; - u32 msize = CFG_DDR_SIZE * 1024 * 1024; - u32 msize_log2 = __ilog2(msize); - - im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; - im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); - im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; - - /* - * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], - * or the DDR2 controller may fail to initialize correctly. - */ - udelay(50000); - - im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; - im->ddr.cs_config[0] = CFG_DDR_CONFIG; - - /* Currently we use only one CS, so disable the other bank. */ - im->ddr.cs_config[1] = 0; - - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - -#ifndef CFG_8313ERDB_BROKEN_PMC - if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) - im->ddr.sdram_cfg = CFG_SDRAM_CFG | SDRAM_CFG_BI; - else -#endif - im->ddr.sdram_cfg = CFG_SDRAM_CFG; - - im->ddr.sdram_cfg2 = CFG_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE_2; - - im->ddr.sdram_interval = CFG_DDR_INTERVAL; - sync(); - - /* enable DDR controller */ - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - - return msize; -} - -long int initdram(int board_type) -{ - volatile immap_t *im = (volatile immap_t *)CFG_IMMR; - volatile lbus83xx_t *lbc = &im->lbus; - u32 msize; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - msize = fixed_sdram(); - - /* Local Bus setup lbcr and mrtpr */ - lbc->lbcr = CFG_LBC_LBCR; - lbc->mrtpr = CFG_LBC_MRTPR; - sync(); - -#ifndef CFG_8313ERDB_BROKEN_PMC - if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) - resume_from_sleep(); -#endif - - /* return total bus SDRAM size(bytes) -- DDR */ - return msize; -} diff --git a/board/mpc832xemds/Makefile b/board/mpc832xemds/Makefile deleted file mode 100644 index 4da74b8..0000000 --- a/board/mpc832xemds/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc832xemds/config.mk b/board/mpc832xemds/config.mk deleted file mode 100644 index 6c3eca7..0000000 --- a/board/mpc832xemds/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MPC832XEMDS -# - -TEXT_BASE = 0xFE000000 diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c deleted file mode 100644 index 7a45ded..0000000 --- a/board/mpc832xemds/mpc832xemds.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * - * Dave Liu - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_PCI) -#include -#endif -#if defined(CONFIG_SPD_EEPROM) -#include -#else -#include -#endif -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif -#if defined(CONFIG_PQ_MDS_PIB) -#include "../freescale/common/pq-mds-pib.h" -#endif - -const qe_iop_conf_t qe_iop_conf_tab[] = { - /* ETH3 */ - {1, 0, 1, 0, 1}, /* TxD0 */ - {1, 1, 1, 0, 1}, /* TxD1 */ - {1, 2, 1, 0, 1}, /* TxD2 */ - {1, 3, 1, 0, 1}, /* TxD3 */ - {1, 9, 1, 0, 1}, /* TxER */ - {1, 12, 1, 0, 1}, /* TxEN */ - {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ - - {1, 4, 2, 0, 1}, /* RxD0 */ - {1, 5, 2, 0, 1}, /* RxD1 */ - {1, 6, 2, 0, 1}, /* RxD2 */ - {1, 7, 2, 0, 1}, /* RxD3 */ - {1, 8, 2, 0, 1}, /* RxER */ - {1, 10, 2, 0, 1}, /* RxDV */ - {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ - {1, 11, 2, 0, 1}, /* COL */ - {1, 13, 2, 0, 1}, /* CRS */ - - /* ETH4 */ - {1, 18, 1, 0, 1}, /* TxD0 */ - {1, 19, 1, 0, 1}, /* TxD1 */ - {1, 20, 1, 0, 1}, /* TxD2 */ - {1, 21, 1, 0, 1}, /* TxD3 */ - {1, 27, 1, 0, 1}, /* TxER */ - {1, 30, 1, 0, 1}, /* TxEN */ - {3, 6, 2, 0, 1}, /* TxCLK->CLK8 */ - - {1, 22, 2, 0, 1}, /* RxD0 */ - {1, 23, 2, 0, 1}, /* RxD1 */ - {1, 24, 2, 0, 1}, /* RxD2 */ - {1, 25, 2, 0, 1}, /* RxD3 */ - {1, 26, 1, 0, 1}, /* RxER */ - {1, 28, 2, 0, 1}, /* Rx_DV */ - {3, 31, 2, 0, 1}, /* RxCLK->CLK7 */ - {1, 29, 2, 0, 1}, /* COL */ - {1, 31, 2, 0, 1}, /* CRS */ - - {3, 4, 3, 0, 2}, /* MDIO */ - {3, 5, 1, 0, 2}, /* MDC */ - - {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ -}; - -int board_early_init_f(void) -{ - volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; - - /* Enable flash write */ - bcsr[9] &= ~0x08; - - return 0; -} - -int board_early_init_r(void) -{ -#ifdef CONFIG_PQ_MDS_PIB - pib_init(); -#endif - return 0; -} - -int fixed_sdram(void); - -long int initdram(int board_type) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = 0; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; - - msize = fixed_sdram(); - - /* return total bus SDRAM size(bytes) -- DDR */ - return (msize * 1024 * 1024); -} - -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = 0; - u32 ddr_size; - u32 ddr_size_log2; - - msize = CFG_DDR_SIZE; - for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { - if (ddr_size & 1) { - return -1; - } - } - im->sysconf.ddrlaw[0].ar = - LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); -#if (CFG_DDR_SIZE != 128) -#warning Currenly any ddr size other than 128 is not supported -#endif - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; - im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; - __asm__ __volatile__ ("sync"); - udelay(200); - - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - __asm__ __volatile__ ("sync"); - return msize; -} - -int checkboard(void) -{ - puts("Board: Freescale MPC832XEMDS\n"); - return 0; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_OF_FLAT_TREE) - u32 *p; - int len; - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -#endif - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/board/mpc832xemds/pci.c b/board/mpc832xemds/pci.c deleted file mode 100644 index 6bc35c7..0000000 --- a/board/mpc832xemds/pci.c +++ /dev/null @@ -1,298 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/* - * PCI Configuration space access support for MPC83xx PCI Bridge - */ -#include -#include -#include -#include -#include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - -#include - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_PCI) -#define PCI_FUNCTION_CONFIG 0x44 -#define PCI_FUNCTION_CFG_LOCK 0x20 - -/* - * Initialize PCI Devices, report devices found - */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc83xxemds_config_table[] = { - { - PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - pci_cfgfunc_config_device, - {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} - }, - {} -} -#endif -static struct pci_controller hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxemds_config_table, -#endif - }, -}; - -/********************************************************************** - * pci_init_board() - *********************************************************************/ -void pci_init_board(void) -#ifdef CONFIG_PCISLAVE -{ - u16 reg16; - volatile immap_t *immr; - volatile law83xx_t *pci_law; - volatile pot83xx_t *pci_pot; - volatile pcictrl83xx_t *pci_ctrl; - volatile pciconf83xx_t *pci_conf; - - immr = (immap_t *) CFG_IMMR; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - /* - * Configure PCI Inbound Translation Windows - */ - pci_ctrl[0].pitar0 = 0x0; - pci_ctrl[0].pibar0 = 0x0; - pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | - PIWAR_WTT_SNOOP | PIWAR_IWS_4K; - - pci_ctrl[0].pitar1 = 0x0; - pci_ctrl[0].pibar1 = 0x0; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 &= ~PIWAR_EN; - - pci_ctrl[0].pitar2 = 0x0; - pci_ctrl[0].pibar2 = 0x0; - pci_ctrl[0].piebar2 = 0x0; - pci_ctrl[0].piwar2 &= ~PIWAR_EN; - - hose[0].first_busno = 0; - hose[0].last_busno = 0xff; - pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); - reg16 = 0xff; - - pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_STATUS, 0xffff); - pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), - PCI_LATENCY_TIMER, 0x80); - - /* - * Unlock configuration lock in PCI function configuration register. - */ - pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_FUNCTION_CONFIG, ®16); - reg16 &= ~(PCI_FUNCTION_CFG_LOCK); - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_FUNCTION_CONFIG, reg16); - - printf("Enabled PCI 32bit Agent Mode\n"); -} -#else -{ - volatile immap_t *immr; - volatile clk83xx_t *clk; - volatile law83xx_t *pci_law; - volatile pot83xx_t *pci_pot; - volatile pcictrl83xx_t *pci_ctrl; - volatile pciconf83xx_t *pci_conf; - - u16 reg16; - u32 val32; - u32 dev; - - immr = (immap_t *) CFG_IMMR; - clk = (clk83xx_t *) & immr->clk; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - /* - * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode - */ - val32 = clk->occr; - udelay(2000); -#if defined(PCI_66M) - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; - printf("PCI clock is 66MHz\n"); -#elif defined(PCI_33M) - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | - OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; - printf("PCI clock is 33MHz\n"); -#else - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; - printf("PCI clock is 66MHz\n"); -#endif - udelay(2000); - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; - - pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI mem space - prefetch */ - pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = - POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI mmio - non-prefetch mem space */ - pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI IO space */ - pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); - - /* - * Configure PCI Inbound Translation Windows - */ - pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; - pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 = - PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | - PIWAR_IWS_2G; - - /* - * Release PCI RST Output signal - */ - udelay(2000); - pci_ctrl[0].gcr = 1; - udelay(2000); - - hose[0].first_busno = 0; - hose[0].last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose[0].regions + 0, - CFG_PCI_MEM_BASE, - CFG_PCI_MEM_PHYS, - CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose[0].regions + 1, - CFG_PCI_MMIO_BASE, - CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose[0].regions + 2, - CFG_PCI_IO_BASE, - CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose[0].regions + 3, - CFG_PCI_SLV_MEM_LOCAL, - CFG_PCI_SLV_MEM_BUS, - CFG_PCI_SLV_MEM_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose[0].region_count = 4; - - pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); - - pci_register_hose(hose); - - /* - * Write command register - */ - reg16 = 0xff; - dev = PCI_BDF(0, 0, 0); - pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); -} -#endif /* CONFIG_PCISLAVE */ - -#if defined(CONFIG_OF_LIBFDT) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - int nodeoffset; - int err; - int tmp[2]; - - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(hose[0].first_busno); - tmp[1] = cpu_to_be32(hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -} -#elif defined(CONFIG_OF_FLAT_TREE) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - u32 *p; - int len; - - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); - if (p != NULL) { - p[0] = hose[0].first_busno; - p[1] = hose[0].last_busno; - } -} -#endif /* CONFIG_OF_FLAT_TREE */ -#endif /* CONFIG_PCI */ diff --git a/board/mpc8349emds/Makefile b/board/mpc8349emds/Makefile deleted file mode 100644 index 5ec7a87..0000000 --- a/board/mpc8349emds/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o pci.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc8349emds/config.mk b/board/mpc8349emds/config.mk deleted file mode 100644 index edf64d1..0000000 --- a/board/mpc8349emds/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MPC8349EMDS -# - -TEXT_BASE = 0xFE000000 diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c deleted file mode 100644 index 39c0916..0000000 --- a/board/mpc8349emds/mpc8349emds.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_SPD_EEPROM) -#include -#endif -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - -int fixed_sdram(void); -void sdram_init(void); - -#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX) -void ddr_enable_ecc(unsigned int dram_size); -#endif - -int board_early_init_f (void) -{ - volatile u8* bcsr = (volatile u8*)CFG_BCSR; - - /* Enable flash write */ - bcsr[1] &= ~0x01; - -#ifdef CFG_USE_MPC834XSYS_USB_PHY - /* Use USB PHY on SYS board */ - bcsr[5] |= 0x02; -#endif - - return 0; -} - -#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) - -long int initdram (int board_type) -{ - volatile immap_t *im = (immap_t *)CFG_IMMR; - u32 msize = 0; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; -#if defined(CONFIG_SPD_EEPROM) - msize = spd_sdram(); -#else - msize = fixed_sdram(); -#endif - /* - * Initialize SDRAM if it is on local bus. - */ - sdram_init(); - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(msize * 1024 * 1024); -#endif - - /* return total bus SDRAM size(bytes) -- DDR */ - return (msize * 1024 * 1024); -} - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *)CFG_IMMR; - u32 msize = 0; - u32 ddr_size; - u32 ddr_size_log2; - - msize = CFG_DDR_SIZE; - for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); - ddr_size = ddr_size>>1, ddr_size_log2++) { - if (ddr_size & 1) { - return -1; - } - } - im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff); - im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - -#if (CFG_DDR_SIZE != 256) -#warning Currenly any ddr size other than 256 is not supported -#endif -#ifdef CONFIG_DDR_II - im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS; - im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; -#else - im->ddr.csbnds[2].csbnds = 0x0000000f; - im->ddr.cs_config[2] = CFG_DDR_CONFIG; - - /* currently we use only one CS, so disable the other banks */ - im->ddr.cs_config[0] = 0; - im->ddr.cs_config[1] = 0; - im->ddr.cs_config[3] = 0; - - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - - im->ddr.sdram_cfg = - SDRAM_CFG_SREN -#if defined(CONFIG_DDR_2T_TIMING) - | SDRAM_CFG_2T_EN -#endif - | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; -#if defined (CONFIG_DDR_32BIT) - /* for 32-bit mode burst length is 8 */ - im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); -#endif - im->ddr.sdram_mode = CFG_DDR_MODE; - - im->ddr.sdram_interval = CFG_DDR_INTERVAL; -#endif - udelay(200); - - /* enable DDR controller */ - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - return msize; -} -#endif/*!CFG_SPD_EEPROM*/ - - -int checkboard (void) -{ - puts("Board: Freescale MPC8349EMDS\n"); - return 0; -} - -/* - * if MPC8349EMDS is soldered with SDRAM - */ -#if defined(CFG_BR2_PRELIM) \ - && defined(CFG_OR2_PRELIM) \ - && defined(CFG_LBLAWBAR2_PRELIM) \ - && defined(CFG_LBLAWAR2_PRELIM) -/* - * Initialize SDRAM memory on the Local Bus. - */ - -void sdram_init(void) -{ - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile lbus83xx_t *lbc= &immap->lbus; - uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; - - /* - * Setup SDRAM Base and Option Registers, already done in cpu_init.c - */ - - /* setup mtrpt, lsrt and lbcr for LB bus */ - lbc->lbcr = CFG_LBC_LBCR; - lbc->mrtpr = CFG_LBC_MRTPR; - lbc->lsrt = CFG_LBC_LSRT; - asm("sync"); - - /* - * Configure the SDRAM controller Machine Mode Register. - */ - lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ - - lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ - asm("sync"); - *sdram_addr = 0xff; - udelay(100); - - lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */ - asm("sync"); - /*1 times*/ - *sdram_addr = 0xff; - udelay(100); - /*2 times*/ - *sdram_addr = 0xff; - udelay(100); - /*3 times*/ - *sdram_addr = 0xff; - udelay(100); - /*4 times*/ - *sdram_addr = 0xff; - udelay(100); - /*5 times*/ - *sdram_addr = 0xff; - udelay(100); - /*6 times*/ - *sdram_addr = 0xff; - udelay(100); - /*7 times*/ - *sdram_addr = 0xff; - udelay(100); - /*8 times*/ - *sdram_addr = 0xff; - udelay(100); - - /* 0x58636733; mode register write operation */ - lbc->lsdmr = CFG_LBC_LSDMR_4; - asm("sync"); - *sdram_addr = 0xff; - udelay(100); - - lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ - asm("sync"); - *sdram_addr = 0xff; - udelay(100); -} -#else -void sdram_init(void) -{ -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_OF_FLAT_TREE) - u32 *p; - int len; - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -#endif - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c deleted file mode 100644 index ae94a2f..0000000 --- a/board/mpc8349emds/pci.c +++ /dev/null @@ -1,446 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_PCI - -/* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE - -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc8349emds_config_table[] = { - {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_IDSEL_NUMBER, PCI_ANY_ID, - pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER - } - }, - {} -}; -#endif - -static struct pci_controller pci_hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc8349emds_config_table, -#endif - }, - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc8349emds_config_table, -#endif - } -}; - -/************************************************************************** - * - * pib_init() -- initialize the PCA9555PW IO expander on the PIB board - * - */ -void -pib_init(void) -{ - u8 val8, orig_i2c_bus; - /* - * Assign PIB PMC slot to desired PCI bus - */ - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); -#if defined(PCI_64BIT) - val8 = 0xf4; /* PMC2:PCI1/64-bit */ -#elif defined(PCI_ALL_PCI1) - val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */ -#elif defined(PCI_ONE_PCI1) - val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */ -#else - val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */ -#endif - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - -#if defined(PCI_64BIT) - printf("PCI1: 64-bit on PMC2\n"); -#elif defined(PCI_ALL_PCI1) - printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n"); -#elif defined(PCI_ONE_PCI1) - printf("PCI1: 32-bit on PMC1\n"); - printf("PCI2: 32-bit on PMC2, PMC3\n"); -#else - printf("PCI1: 32-bit on PMC1, PMC2\n"); - printf("PCI2: 32-bit on PMC3\n"); -#endif - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); -} - -/************************************************************************** - * pci_init_board() - * - * NOTICE: PCI2 is not currently supported - * - */ -void -pci_init_board(void) -{ - volatile immap_t * immr; - volatile clk83xx_t * clk; - volatile law83xx_t * pci_law; - volatile pot83xx_t * pci_pot; - volatile pcictrl83xx_t * pci_ctrl; - volatile pciconf83xx_t * pci_conf; - u16 reg16; - u32 reg32; - u32 dev; - struct pci_controller * hose; - - immr = (immap_t *)CFG_IMMR; - clk = (clk83xx_t *)&immr->clk; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - - hose = &pci_hose[0]; - - pib_init(); - - /* - * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode - */ - - reg32 = clk->occr; - udelay(2000); - clk->occr = 0xff000000; - udelay(2000); - - /* - * Release PCI RST Output signal - */ - pci_ctrl[0].gcr = 0; - udelay(2000); - pci_ctrl[0].gcr = 1; - -#ifdef CONFIG_MPC83XX_PCI2 - pci_ctrl[1].gcr = 0; - udelay(2000); - pci_ctrl[1].gcr = 1; -#endif - - /* We need to wait at least a 1sec based on PCI specs */ - { - int i; - - for (i = 0; i < 1000; ++i) - udelay (1000); - } - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; - - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI1 mem space - prefetch */ - pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI1 IO space */ - pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); - - /* PCI1 mmio - non-prefetch mem space */ - pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); - - /* - * Configure PCI Inbound Translation Windows - */ - - /* we need RAM mapped to PCI space for the devices to - * access main memory */ - pci_ctrl[0].pitar1 = 0x0; - pci_ctrl[0].pibar1 = 0x0; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); - - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose->regions + 0, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, - PCI_REGION_MEM|PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MMIO_BASE, - CFG_PCI1_MMIO_PHYS, - CFG_PCI1_MMIO_SIZE, - PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, - PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose->regions + 3, - CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - gd->ram_size, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose->region_count = 4; - - pci_setup_indirect(hose, - (CFG_IMMR+0x8300), - (CFG_IMMR+0x8304)); - - pci_register_hose(hose); - - /* - * Write to Command register - */ - reg16 = 0xff; - dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); - -#ifdef CONFIG_PCI_SCAN_SHOW - printf("PCI: Bus Dev VenId DevId Class Int\n"); -#endif - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); - -#ifdef CONFIG_MPC83XX_PCI2 - hose = &pci_hose[1]; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI2 mem space - prefetch */ - pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI2 IO space */ - pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); - - /* PCI2 mmio - non-prefetch mem space */ - pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); - - /* - * Configure PCI Inbound Translation Windows - */ - - /* we need RAM mapped to PCI space for the devices to - * access main memory */ - pci_ctrl[1].pitar1 = 0x0; - pci_ctrl[1].pibar1 = 0x0; - pci_ctrl[1].piebar1 = 0x0; - pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); - - hose->first_busno = pci_hose[0].last_busno + 1; - hose->last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose->regions + 0, - CFG_PCI2_MEM_BASE, - CFG_PCI2_MEM_PHYS, - CFG_PCI2_MEM_SIZE, - PCI_REGION_MEM|PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - CFG_PCI2_MMIO_BASE, - CFG_PCI2_MMIO_PHYS, - CFG_PCI2_MMIO_SIZE, - PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 2, - CFG_PCI2_IO_BASE, - CFG_PCI2_IO_PHYS, - CFG_PCI2_IO_SIZE, - PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose->regions + 3, - CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - gd->ram_size, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose->region_count = 4; - - pci_setup_indirect(hose, - (CFG_IMMR+0x8380), - (CFG_IMMR+0x8384)); - - pci_register_hose(hose); - - /* - * Write to Command register - */ - reg16 = 0xff; - dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); - - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); -#endif - -} - -#if defined(CONFIG_OF_LIBFDT) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - int nodeoffset; - int err; - int tmp[2]; - - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(pci_hose[0].first_busno); - tmp[1] = cpu_to_be32(pci_hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -#ifdef CONFIG_MPC83XX_PCI2 - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(pci_hose[1].first_busno); - tmp[1] = cpu_to_be32(pci_hose[1].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -#endif -} -#elif defined(CONFIG_OF_FLAT_TREE) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - u32 *p; - int len; - - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); - if (p != NULL) { - p[0] = pci_hose[0].first_busno; - p[1] = pci_hose[0].last_busno; - } - -#ifdef CONFIG_MPC83XX_PCI2 - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); - if (p != NULL) { - p[0] = pci_hose[1].first_busno; - p[1] = pci_hose[1].last_busno; - } -#endif -} -#endif /* CONFIG_OF_FLAT_TREE */ -#endif /* CONFIG_PCI */ diff --git a/board/mpc8349itx/Makefile b/board/mpc8349itx/Makefile deleted file mode 100644 index 31bcdb8..0000000 --- a/board/mpc8349itx/Makefile +++ /dev/null @@ -1,48 +0,0 @@ -# -# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o pci.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) crv $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc8349itx/config.mk b/board/mpc8349itx/config.mk deleted file mode 100644 index 79f1765..0000000 --- a/board/mpc8349itx/config.mk +++ /dev/null @@ -1,31 +0,0 @@ -# -# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MPC8349E-mITX and MPC8349E-mITX-GP -# - -sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp - -ifndef TEXT_BASE -TEXT_BASE = 0xFEF00000 -endif diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c deleted file mode 100644 index c82f784..0000000 --- a/board/mpc8349itx/mpc8349itx.c +++ /dev/null @@ -1,407 +0,0 @@ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_PCI -#include -#include -#endif - -#ifdef CONFIG_SPD_EEPROM -#include -#else -#include -#endif -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - -#ifndef CONFIG_SPD_EEPROM -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 ddr_size; /* The size of RAM, in bytes */ - u32 ddr_size_log2 = 0; - - for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { - if (ddr_size & 1) { - return -1; - } - ddr_size_log2++; - } - - im->sysconf.ddrlaw[0].ar = - LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff; - - /* Only one CS0 for DDR */ - im->ddr.csbnds[0].csbnds = 0x0000000f; - im->ddr.cs_config[0] = CFG_DDR_CONFIG; - - debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); - debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); - - debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); - debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); - - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ - im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; - im->ddr.sdram_mode = - (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); - im->ddr.sdram_interval = - (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << - SDRAM_INTERVAL_BSTOPRE_SHIFT); - im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; - - udelay(200); - - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - - debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1); - debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2); - debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode); - debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); - debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); - - return CFG_DDR_SIZE; -} -#endif - -#ifdef CONFIG_PCI -/* - * Initialize PCI Devices, report devices found - */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc83xxmitx_config_table[] = { - { - PCI_ANY_ID, - PCI_ANY_ID, - PCI_ANY_ID, - PCI_ANY_ID, - 0x0f, - PCI_ANY_ID, - pci_cfgfunc_config_device, - { - PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} - }, - {} -} -#endif - -volatile static struct pci_controller hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxmitx_config_table, -#endif - }, - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxmitx_config_table, -#endif - } -}; -#endif /* CONFIG_PCI */ - -long int initdram(int board_type) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = 0; -#ifdef CONFIG_DDR_ECC - volatile ddr83xx_t *ddr = &im->ddr; -#endif - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; -#ifdef CONFIG_SPD_EEPROM - msize = spd_sdram(); -#else - msize = fixed_sdram(); -#endif - -#ifdef CONFIG_DDR_ECC - if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) - /* Unlike every other board, on the 83xx spd_sdram() returns - megabytes instead of just bytes. That's why we need to - multiple by 1MB when calling ddr_enable_ecc(). */ - ddr_enable_ecc(msize * 1048576); -#endif - - /* return total bus RAM size(bytes) */ - return msize * 1024 * 1024; -} - -int checkboard(void) -{ -#ifdef CONFIG_MPC8349ITX - puts("Board: Freescale MPC8349E-mITX\n"); -#else - puts("Board: Freescale MPC8349E-mITX-GP\n"); -#endif - - return 0; -} - -/* - * Implement a work-around for a hardware problem with compact - * flash. - * - * Program the UPM if compact flash is enabled. - */ -int misc_init_f(void) -{ -#ifdef CONFIG_VSC7385 - volatile u32 *vsc7385_cpuctrl; - - /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up - default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That - means it is 0 when the IRQ is not active. This makes the wire-AND - logic always assert IRQ7 to CPU even if there is no request from the - switch. Since the compact flash and the switch share the same IRQ, - the Linux kernel will think that the compact flash is requesting irq - and get stuck when it tries to clear the IRQ. Thus we need to set - the L2_IRQ0 and L2_IRQ1 to active low. - - The following code sets the L1_IRQ and L2_IRQ polarity to active low. - Without this code, compact flash will not work in Linux because - unlike U-Boot, Linux uses the IRQ, so this code is necessary if we - don't enable compact flash for U-Boot. - */ - - vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0); - *vsc7385_cpuctrl |= 0x0c; -#endif - -#ifdef CONFIG_COMPACT_FLASH - /* UPM Table Configuration Code */ - static uint UPMATable[] = { - 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00, - 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00, - 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 - }; - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile lbus83xx_t *lbus = &immap->lbus; - - lbus->bank[3].br = CFG_BR3_PRELIM; - lbus->bank[3].or = CFG_OR3_PRELIM; - - /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, - GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 - */ - lbus->mamr = 0x08404440; - - upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); - - puts("UPMA: Configured for compact flash\n"); -#endif - - return 0; -} - -/* - * Make sure the EEPROM has the HRCW correctly programmed. - * Make sure the RTC is correctly programmed. - * - * The MPC8349E-mITX can be configured to load the HRCW from - * EEPROM instead of flash. This is controlled via jumpers - * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all - * jumpered), but if they're set to 001 or 010, then the HRCW is - * read from the "I2C EEPROM". - * - * This function makes sure that the I2C EEPROM is programmed - * correctly. - */ -int misc_init_r(void) -{ - int rc = 0; - -#ifdef CONFIG_HARD_I2C - - unsigned int orig_bus = i2c_get_bus_num(); - u8 i2c_data; - -#ifdef CFG_I2C_RTC_ADDR - u8 ds1339_data[17]; -#endif - -#ifdef CFG_I2C_EEPROM_ADDR - static u8 eeprom_data[] = /* HRCW data */ - { - 0xAA, 0x55, 0xAA, /* Preamble */ - 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ - 0x02, 0x40, /* RCWL ADDR=0x0_0900 */ - (CFG_HRCW_LOW >> 24) & 0xFF, - (CFG_HRCW_LOW >> 16) & 0xFF, - (CFG_HRCW_LOW >> 8) & 0xFF, - CFG_HRCW_LOW & 0xFF, - 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ - 0x02, 0x41, /* RCWH ADDR=0x0_0904 */ - (CFG_HRCW_HIGH >> 24) & 0xFF, - (CFG_HRCW_HIGH >> 16) & 0xFF, - (CFG_HRCW_HIGH >> 8) & 0xFF, - CFG_HRCW_HIGH & 0xFF - }; - - u8 data[sizeof(eeprom_data)]; -#endif - - printf("Board revision: "); - i2c_set_bus_num(1); - if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) - printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); - else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) - printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); - else { - printf("Unknown\n"); - rc = 1; - } - -#ifdef CFG_I2C_EEPROM_ADDR - i2c_set_bus_num(0); - - if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { - if (memcmp(data, eeprom_data, sizeof(data)) != 0) { - if (i2c_write - (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data, - sizeof(eeprom_data)) != 0) { - puts("Failure writing the HRCW to EEPROM via I2C.\n"); - rc = 1; - } - } - } else { - puts("Failure reading the HRCW from EEPROM via I2C.\n"); - rc = 1; - } -#endif - -#ifdef CFG_I2C_RTC_ADDR - i2c_set_bus_num(1); - - if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) - == 0) { - - /* Work-around for MPC8349E-mITX bug #13601. - If the RTC does not contain valid register values, the DS1339 - Linux driver will not work. - */ - - /* Make sure status register bits 6-2 are zero */ - ds1339_data[0x0f] &= ~0x7c; - - /* Check for a valid day register value */ - ds1339_data[0x03] &= ~0xf8; - if (ds1339_data[0x03] == 0) { - ds1339_data[0x03] = 1; - } - - /* Check for a valid date register value */ - ds1339_data[0x04] &= ~0xc0; - if ((ds1339_data[0x04] == 0) || - ((ds1339_data[0x04] & 0x0f) > 9) || - (ds1339_data[0x04] >= 0x32)) { - ds1339_data[0x04] = 1; - } - - /* Check for a valid month register value */ - ds1339_data[0x05] &= ~0x60; - - if ((ds1339_data[0x05] == 0) || - ((ds1339_data[0x05] & 0x0f) > 9) || - ((ds1339_data[0x05] >= 0x13) - && (ds1339_data[0x05] <= 0x19))) { - ds1339_data[0x05] = 1; - } - - /* Enable Oscillator and rate select */ - ds1339_data[0x0e] = 0x1c; - - /* Work-around for MPC8349E-mITX bug #13330. - Ensure that the RTC control register contains the value 0x1c. - This affects SATA performance. - */ - - if (i2c_write - (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, - sizeof(ds1339_data))) { - puts("Failure writing to the RTC via I2C.\n"); - rc = 1; - } - } else { - puts("Failure reading from the RTC via I2C.\n"); - rc = 1; - } -#endif - - i2c_set_bus_num(orig_bus); -#endif - - return rc; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_OF_FLAT_TREE) - u32 *p; - int len; - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -#endif - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c deleted file mode 100644 index 5ca094d..0000000 --- a/board/mpc8349itx/pci.c +++ /dev/null @@ -1,392 +0,0 @@ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#ifdef CONFIG_PCI - -#include -#include -#include -#include -#include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE - -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc8349itx_config_table[] = { - { - PCI_ANY_ID, - PCI_ANY_ID, - PCI_ANY_ID, - PCI_ANY_ID, - PCI_IDSEL_NUMBER, - PCI_ANY_ID, - pci_cfgfunc_config_device, - { - PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} - }, - {} -}; -#endif - -static struct pci_controller pci_hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc8349itx_config_table, -#endif - }, - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc8349itx_config_table, -#endif - } -}; - -/************************************************************************** - * pci_init_board() - * - * NOTICE: PCI2 is not currently supported - * - */ -void pci_init_board(void) -{ - volatile immap_t *immr; - volatile clk83xx_t *clk; - volatile law83xx_t *pci_law; - volatile pot83xx_t *pci_pot; - volatile pcictrl83xx_t *pci_ctrl; - volatile pciconf83xx_t *pci_conf; - u8 reg8; - u16 reg16; - u32 reg32; - u32 dev; - struct pci_controller *hose; - - immr = (immap_t *) CFG_IMMR; - clk = (clk83xx_t *) & immr->clk; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - - hose = &pci_hose[0]; - - /* - * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode - */ - - reg32 = clk->occr; - udelay(2000); - -#ifdef CONFIG_HARD_I2C - i2c_set_bus_num(1); - /* Read the PCI_M66EN jumper setting */ - if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || - (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { - if (reg8 & I2C_8574_PCI66) - clk->occr = 0xff000000; /* 66 MHz PCI */ - else - clk->occr = 0xff600001; /* 33 MHz PCI */ - } else { - clk->occr = 0xff600001; /* 33 MHz PCI */ - } -#else - clk->occr = 0xff000000; /* 66 MHz PCI */ -#endif - - udelay(2000); - - /* - * Release PCI RST Output signal - */ - pci_ctrl[0].gcr = 0; - udelay(2000); - pci_ctrl[0].gcr = 1; - -#ifdef CONFIG_MPC83XX_PCI2 - pci_ctrl[1].gcr = 0; - udelay(2000); - pci_ctrl[1].gcr = 1; -#endif - - /* We need to wait at least a 1sec based on PCI specs */ - { - int i; - - for (i = 0; i < 1000; i++) - udelay(1000); - } - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; - - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI1 mem space - prefetch */ - pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M; - - /* PCI1 IO space */ - pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M; - - /* PCI1 mmio - non-prefetch mem space */ - pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M; - - /* - * Configure PCI Inbound Translation Windows - */ - - /* we need RAM mapped to PCI space for the devices to - * access main memory */ - pci_ctrl[0].pitar1 = 0x0; - pci_ctrl[0].pibar1 = 0x0; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | - PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); - - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose->regions + 0, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MMIO_BASE, - CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose->regions + 3, - CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose->region_count = 4; - - pci_setup_indirect(hose, - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); - - pci_register_hose(hose); - - /* - * Write to Command register - */ - reg16 = 0xff; - dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); - -#ifdef CONFIG_PCI_SCAN_SHOW - printf("PCI: Bus Dev VenId DevId Class Int\n"); -#endif - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); - -#ifdef CONFIG_MPC83XX_PCI2 - hose = &pci_hose[1]; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI2 mem space - prefetch */ - pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M; - - /* PCI2 IO space */ - pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M; - - /* PCI2 mmio - non-prefetch mem space */ - pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M; - - /* - * Configure PCI Inbound Translation Windows - */ - - /* we need RAM mapped to PCI space for the devices to - * access main memory */ - pci_ctrl[1].pitar1 = 0x0; - pci_ctrl[1].pibar1 = 0x0; - pci_ctrl[1].piebar1 = 0x0; - pci_ctrl[1].piwar1 = - PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | - (__ilog2(gd->ram_size) - 1); - - hose->first_busno = pci_hose[0].last_busno + 1; - hose->last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose->regions + 0, - CFG_PCI2_MEM_BASE, - CFG_PCI2_MEM_PHYS, - CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - CFG_PCI2_MMIO_BASE, - CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 2, - CFG_PCI2_IO_BASE, - CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose->regions + 3, - CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose->region_count = 4; - - pci_setup_indirect(hose, - (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384)); - - pci_register_hose(hose); - - /* - * Write to Command register - */ - reg16 = 0xff; - dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); - - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); -#endif -} - -#if defined(CONFIG_OF_LIBFDT) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - int nodeoffset; - int err; - int tmp[2]; - - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(pci_hose[0].first_busno); - tmp[1] = cpu_to_be32(pci_hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -#ifdef CONFIG_MPC83XX_PCI2 - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(pci_hose[1].first_busno); - tmp[1] = cpu_to_be32(pci_hose[1].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -#endif -} -#elif defined(CONFIG_OF_FLAT_TREE) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - u32 *p; - int len; - - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); - if (p != NULL) { - p[0] = pci_hose[0].first_busno; - p[1] = pci_hose[0].last_busno; - } - -#ifdef CONFIG_MPC83XX_PCI2 - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); - if (p != NULL) { - p[0] = pci_hose[1].first_busno; - p[1] = pci_hose[1].last_busno; - } -#endif -} -#endif /* CONFIG_OF_FLAT_TREE */ -#endif /* CONFIG_PCI */ diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile deleted file mode 100644 index 4da74b8..0000000 --- a/board/mpc8360emds/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc8360emds/config.mk b/board/mpc8360emds/config.mk deleted file mode 100644 index 9ace886..0000000 --- a/board/mpc8360emds/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MPC8360EMDS -# - -TEXT_BASE = 0xFE000000 diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c deleted file mode 100644 index 0751c6f..0000000 --- a/board/mpc8360emds/mpc8360emds.c +++ /dev/null @@ -1,313 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * Dave Liu - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_PCI) -#include -#endif -#if defined(CONFIG_SPD_EEPROM) -#include -#else -#include -#endif -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif -#if defined(CONFIG_PQ_MDS_PIB) -#include "../freescale/common/pq-mds-pib.h" -#endif - -const qe_iop_conf_t qe_iop_conf_tab[] = { - /* GETH1 */ - {0, 3, 1, 0, 1}, /* TxD0 */ - {0, 4, 1, 0, 1}, /* TxD1 */ - {0, 5, 1, 0, 1}, /* TxD2 */ - {0, 6, 1, 0, 1}, /* TxD3 */ - {1, 6, 1, 0, 3}, /* TxD4 */ - {1, 7, 1, 0, 1}, /* TxD5 */ - {1, 9, 1, 0, 2}, /* TxD6 */ - {1, 10, 1, 0, 2}, /* TxD7 */ - {0, 9, 2, 0, 1}, /* RxD0 */ - {0, 10, 2, 0, 1}, /* RxD1 */ - {0, 11, 2, 0, 1}, /* RxD2 */ - {0, 12, 2, 0, 1}, /* RxD3 */ - {0, 13, 2, 0, 1}, /* RxD4 */ - {1, 1, 2, 0, 2}, /* RxD5 */ - {1, 0, 2, 0, 2}, /* RxD6 */ - {1, 4, 2, 0, 2}, /* RxD7 */ - {0, 7, 1, 0, 1}, /* TX_EN */ - {0, 8, 1, 0, 1}, /* TX_ER */ - {0, 15, 2, 0, 1}, /* RX_DV */ - {0, 16, 2, 0, 1}, /* RX_ER */ - {0, 0, 2, 0, 1}, /* RX_CLK */ - {2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */ - {2, 8, 2, 0, 1}, /* GTX125 - CLK9 */ - /* GETH2 */ - {0, 17, 1, 0, 1}, /* TxD0 */ - {0, 18, 1, 0, 1}, /* TxD1 */ - {0, 19, 1, 0, 1}, /* TxD2 */ - {0, 20, 1, 0, 1}, /* TxD3 */ - {1, 2, 1, 0, 1}, /* TxD4 */ - {1, 3, 1, 0, 2}, /* TxD5 */ - {1, 5, 1, 0, 3}, /* TxD6 */ - {1, 8, 1, 0, 3}, /* TxD7 */ - {0, 23, 2, 0, 1}, /* RxD0 */ - {0, 24, 2, 0, 1}, /* RxD1 */ - {0, 25, 2, 0, 1}, /* RxD2 */ - {0, 26, 2, 0, 1}, /* RxD3 */ - {0, 27, 2, 0, 1}, /* RxD4 */ - {1, 12, 2, 0, 2}, /* RxD5 */ - {1, 13, 2, 0, 3}, /* RxD6 */ - {1, 11, 2, 0, 2}, /* RxD7 */ - {0, 21, 1, 0, 1}, /* TX_EN */ - {0, 22, 1, 0, 1}, /* TX_ER */ - {0, 29, 2, 0, 1}, /* RX_DV */ - {0, 30, 2, 0, 1}, /* RX_ER */ - {0, 31, 2, 0, 1}, /* RX_CLK */ - {2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */ - {2, 3, 2, 0, 1}, /* GTX125 - CLK4 */ - - {0, 1, 3, 0, 2}, /* MDIO */ - {0, 2, 1, 0, 1}, /* MDC */ - - {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ -}; - -int board_early_init_f(void) -{ - - u8 *bcsr = (u8 *)CFG_BCSR; - const immap_t *immr = (immap_t *)CFG_IMMR; - - /* Enable flash write */ - bcsr[0xa] &= ~0x04; - - /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */ - if (immr->sysconf.spridr == SPR_8360_REV20 || - immr->sysconf.spridr == SPR_8360E_REV20 || - immr->sysconf.spridr == SPR_8360_REV21 || - immr->sysconf.spridr == SPR_8360E_REV21) - bcsr[0xe] = 0x30; - - return 0; -} - -int board_early_init_r(void) -{ -#ifdef CONFIG_PQ_MDS_PIB - pib_init(); -#endif - return 0; -} - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif -int fixed_sdram(void); -void sdram_init(void); - -long int initdram(int board_type) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = 0; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; -#if defined(CONFIG_SPD_EEPROM) - msize = spd_sdram(); -#else - msize = fixed_sdram(); -#endif - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) - /* - * Initialize DDR ECC byte - */ - ddr_enable_ecc(msize * 1024 * 1024); -#endif - /* - * Initialize SDRAM if it is on local bus. - */ - sdram_init(); - - /* return total bus SDRAM size(bytes) -- DDR */ - return (msize * 1024 * 1024); -} - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = 0; - u32 ddr_size; - u32 ddr_size_log2; - - msize = CFG_DDR_SIZE; - for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { - if (ddr_size & 1) { - return -1; - } - } - im->sysconf.ddrlaw[0].ar = - LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); -#if (CFG_DDR_SIZE != 256) -#warning Currenly any ddr size other than 256 is not supported -#endif -#ifdef CONFIG_DDR_II - im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; -#else - im->ddr.csbnds[0].csbnds = 0x00000007; - im->ddr.csbnds[1].csbnds = 0x0008000f; - - im->ddr.cs_config[0] = CFG_DDR_CONFIG; - im->ddr.cs_config[1] = CFG_DDR_CONFIG; - - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.sdram_cfg = CFG_DDR_CONTROL; - - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; -#endif - udelay(200); - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - - return msize; -} -#endif /*!CFG_SPD_EEPROM */ - -int checkboard(void) -{ - puts("Board: Freescale MPC8360EMDS\n"); - return 0; -} - -/* - * if MPC8360EMDS is soldered with SDRAM - */ -#if defined(CFG_BR2_PRELIM) \ - && defined(CFG_OR2_PRELIM) \ - && defined(CFG_LBLAWBAR2_PRELIM) \ - && defined(CFG_LBLAWAR2_PRELIM) -/* - * Initialize SDRAM memory on the Local Bus. - */ - -void sdram_init(void) -{ - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile lbus83xx_t *lbc = &immap->lbus; - uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; - - /* - * Setup SDRAM Base and Option Registers, already done in cpu_init.c - */ - /*setup mtrpt, lsrt and lbcr for LB bus */ - lbc->lbcr = CFG_LBC_LBCR; - lbc->mrtpr = CFG_LBC_MRTPR; - lbc->lsrt = CFG_LBC_LSRT; - asm("sync"); - - /* - * Configure the SDRAM controller Machine Mode Register. - */ - lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */ - lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */ - asm("sync"); - *sdram_addr = 0xff; - udelay(100); - - /* - * We need do 8 times auto refresh operation. - */ - lbc->lsdmr = CFG_LBC_LSDMR_2; - asm("sync"); - *sdram_addr = 0xff; /* 1 times */ - udelay(100); - *sdram_addr = 0xff; /* 2 times */ - udelay(100); - *sdram_addr = 0xff; /* 3 times */ - udelay(100); - *sdram_addr = 0xff; /* 4 times */ - udelay(100); - *sdram_addr = 0xff; /* 5 times */ - udelay(100); - *sdram_addr = 0xff; /* 6 times */ - udelay(100); - *sdram_addr = 0xff; /* 7 times */ - udelay(100); - *sdram_addr = 0xff; /* 8 times */ - udelay(100); - - /* Mode register write operation */ - lbc->lsdmr = CFG_LBC_LSDMR_4; - asm("sync"); - *(sdram_addr + 0xcc) = 0xff; - udelay(100); - - /* Normal operation */ - lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000; - asm("sync"); - *sdram_addr = 0xff; - udelay(100); -} -#else -void sdram_init(void) -{ -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_OF_FLAT_TREE) - u32 *p; - int len; - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -#endif - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c deleted file mode 100644 index cf7ef90..0000000 --- a/board/mpc8360emds/pci.c +++ /dev/null @@ -1,298 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/* - * PCI Configuration space access support for MPC83xx PCI Bridge - */ -#include -#include -#include -#include -#include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - -#include - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_PCI) -#define PCI_FUNCTION_CONFIG 0x44 -#define PCI_FUNCTION_CFG_LOCK 0x20 - -/* - * Initialize PCI Devices, report devices found - */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc83xxemds_config_table[] = { - { - PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - pci_cfgfunc_config_device, - {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} - }, - {} -} -#endif -static struct pci_controller hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxemds_config_table, -#endif - }, -}; - -/********************************************************************** - * pci_init_board() - *********************************************************************/ -void pci_init_board(void) -#ifdef CONFIG_PCISLAVE -{ - u16 reg16; - volatile immap_t *immr; - volatile law83xx_t *pci_law; - volatile pot83xx_t *pci_pot; - volatile pcictrl83xx_t *pci_ctrl; - volatile pciconf83xx_t *pci_conf; - - immr = (immap_t *) CFG_IMMR; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - /* - * Configure PCI Inbound Translation Windows - */ - pci_ctrl[0].pitar0 = 0x0; - pci_ctrl[0].pibar0 = 0x0; - pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | - PIWAR_WTT_SNOOP | PIWAR_IWS_4K; - - pci_ctrl[0].pitar1 = 0x0; - pci_ctrl[0].pibar1 = 0x0; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 &= ~PIWAR_EN; - - pci_ctrl[0].pitar2 = 0x0; - pci_ctrl[0].pibar2 = 0x0; - pci_ctrl[0].piebar2 = 0x0; - pci_ctrl[0].piwar2 &= ~PIWAR_EN; - - hose[0].first_busno = 0; - hose[0].last_busno = 0xff; - pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); - reg16 = 0xff; - - pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_STATUS, 0xffff); - pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), - PCI_LATENCY_TIMER, 0x80); - - /* - * Unlock configuration lock in PCI function configuration register. - */ - pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_FUNCTION_CONFIG, ®16); - reg16 &= ~(PCI_FUNCTION_CFG_LOCK); - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_FUNCTION_CONFIG, reg16); - - printf("Enabled PCI 32bit Agent Mode\n"); -} -#else -{ - volatile immap_t *immr; - volatile clk83xx_t *clk; - volatile law83xx_t *pci_law; - volatile pot83xx_t *pci_pot; - volatile pcictrl83xx_t *pci_ctrl; - volatile pciconf83xx_t *pci_conf; - - u16 reg16; - u32 val32; - u32 dev; - - immr = (immap_t *) CFG_IMMR; - clk = (clk83xx_t *) & immr->clk; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - /* - * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode - */ - val32 = clk->occr; - udelay(2000); -#if defined(PCI_66M) - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; - printf("PCI clock is 66MHz\n"); -#elif defined(PCI_33M) - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | - OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; - printf("PCI clock is 33MHz\n"); -#else - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; - printf("PCI clock is 66MHz\n"); -#endif - udelay(2000); - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; - - pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI mem space - prefetch */ - pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = - POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI mmio - non-prefetch mem space */ - pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI IO space */ - pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); - - /* - * Configure PCI Inbound Translation Windows - */ - pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; - pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 = - PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | - PIWAR_IWS_2G; - - /* - * Release PCI RST Output signal - */ - udelay(2000); - pci_ctrl[0].gcr = 1; - udelay(2000); - - hose[0].first_busno = 0; - hose[0].last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose[0].regions + 0, - CFG_PCI_MEM_BASE, - CFG_PCI_MEM_PHYS, - CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose[0].regions + 1, - CFG_PCI_MMIO_BASE, - CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose[0].regions + 2, - CFG_PCI_IO_BASE, - CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose[0].regions + 3, - CFG_PCI_SLV_MEM_LOCAL, - CFG_PCI_SLV_MEM_BUS, - CFG_PCI_SLV_MEM_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose[0].region_count = 4; - - pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); - - pci_register_hose(hose); - - /* - * Write command register - */ - reg16 = 0xff; - dev = PCI_BDF(0, 0, 0); - pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); -} -#endif /* CONFIG_PCISLAVE */ - -#if defined(CONFIG_OF_LIBFDT) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - int nodeoffset; - int err; - int tmp[2]; - - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(hose[0].first_busno); - tmp[1] = cpu_to_be32(hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -} -#elif defined(CONFIG_OF_FLAT_TREE) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - u32 *p; - int len; - - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); - if (p != NULL) { - p[0] = hose[0].first_busno; - p[1] = hose[0].last_busno; - } -} -#endif /* CONFIG_OF_FLAT_TREE */ -#endif /* CONFIG_PCI */ -- cgit v1.1 From 4cc1cd5941827a04cf5c51a07fcc42e8945894aa Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 17 Aug 2007 09:30:00 -0500 Subject: mpc83xx: fix typo in DDR2 programming introduced in the implement board_add_ram_info patch as I was cleaning out the magic numbers. sorry. Signed-off-by: Kim Phillips --- cpu/mpc83xx/spd_sdram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 040836c..ee2d038 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -744,7 +744,7 @@ long int spd_sdram() if (spd.mem_type == SPD_MEMTYPE_DDR) sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1; else - sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1; + sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR2; sdram_cfg = (0 | SDRAM_CFG_MEM_EN /* DDR enable */ -- cgit v1.1 From 4a442d3186b31893b4f77c6e82f63c4517a5224b Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 19:23:50 -0500 Subject: ColdFire: Add M5235EVB Platform for MCF523x Signed-off-by: TsiChungLiew --- CREDITS | 2 +- MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 25 +- board/freescale/m5235evb/Makefile | 44 ++ board/freescale/m5235evb/config.mk | 28 ++ board/freescale/m5235evb/m5235evb.c | 117 +++++ board/freescale/m5235evb/mii.c | 307 ++++++++++++ board/freescale/m5235evb/u-boot.16 | 145 ++++++ board/freescale/m5235evb/u-boot.32 | 153 ++++++ board/freescale/m5235evb/u-boot.lds | 145 ++++++ cpu/mcf523x/Makefile | 48 ++ cpu/mcf523x/config.mk | 27 ++ cpu/mcf523x/cpu.c | 109 +++++ cpu/mcf523x/cpu_init.c | 145 ++++++ cpu/mcf523x/interrupts.c | 49 ++ cpu/mcf523x/speed.c | 48 ++ cpu/mcf523x/start.S | 340 ++++++++++++++ include/asm-m68k/immap.h | 29 ++ include/asm-m68k/immap_5235.h | 378 +++++++++++++++ include/asm-m68k/m5235.h | 905 ++++++++++++++++++++++++++++++++++++ include/configs/M5235EVB.h | 261 +++++++++++ 22 files changed, 3303 insertions(+), 4 deletions(-) create mode 100644 board/freescale/m5235evb/Makefile create mode 100644 board/freescale/m5235evb/config.mk create mode 100644 board/freescale/m5235evb/m5235evb.c create mode 100644 board/freescale/m5235evb/mii.c create mode 100644 board/freescale/m5235evb/u-boot.16 create mode 100644 board/freescale/m5235evb/u-boot.32 create mode 100644 board/freescale/m5235evb/u-boot.lds create mode 100644 cpu/mcf523x/Makefile create mode 100644 cpu/mcf523x/config.mk create mode 100644 cpu/mcf523x/cpu.c create mode 100644 cpu/mcf523x/cpu_init.c create mode 100644 cpu/mcf523x/interrupts.c create mode 100644 cpu/mcf523x/speed.c create mode 100644 cpu/mcf523x/start.S create mode 100644 include/asm-m68k/immap_5235.h create mode 100644 include/asm-m68k/m5235.h create mode 100644 include/configs/M5235EVB.h diff --git a/CREDITS b/CREDITS index f30b222..6e44db4 100644 --- a/CREDITS +++ b/CREDITS @@ -491,7 +491,7 @@ W: www.monstr.eu N: TsiChung Liew E: Tsi-Chung.Liew@freescale.com -D: Support for ColdFire MCF532x, MCF5445x +D: Support for ColdFire MCF523x, MCF532x, MCF5445x W: www.freescale.com N: Hayden Fraser diff --git a/MAINTAINERS b/MAINTAINERS index 7fde6d9..d150286 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -608,6 +608,7 @@ Zachary P. Landau TsiChung Liew + M5235EVB mcf52x2 M5329EVB mcf532x M54455EVB mcf5445x diff --git a/MAKEALL b/MAKEALL index b7ed0f4..125c782 100755 --- a/MAKEALL +++ b/MAKEALL @@ -618,6 +618,7 @@ LIST_coldfire=" \ EB+MCF-EV123 \ EB+MCF-EV123_internal \ idmr \ + M5235EVB \ M5249EVB \ M5253EVB \ M5271EVB \ diff --git a/Makefile b/Makefile index 201ad0e..7b2b025 100644 --- a/Makefile +++ b/Makefile @@ -1639,6 +1639,25 @@ ZPC1900_config: unconfig ## Coldfire ######################################################################### +M5235EVB_config \ +M5235EVB_Flash16_config \ +M5235EVB_Flash32_config: unconfig + @case "$@" in \ + M5235EVB_config) FLASH=16;; \ + M5235EVB_Flash16_config) FLASH=16;; \ + M5235EVB_Flash32_config) FLASH=32;; \ + esac; \ + >include/config.h ; \ + if [ "$${FLASH}" != "16" ] ; then \ + echo "#define NORFLASH_PS32BIT 1" >> include/config.h ; \ + echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ + cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ + else \ + echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ + cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ + fi + @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale + M5249EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale @@ -1710,13 +1729,13 @@ M54455EVB_i66_config : unconfig esac; \ >include/config.h ; \ if [ "$${FLASH}" == "INTEL" ] ; then \ - echo "#undef CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "... with INTEL boot..." ; \ else \ - echo "#define CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "... with ATMEL boot..." ; \ fi; \ - echo "#define CFG_INPUT_CLKSRC $${FREQ}" >>include/config.h ; \ + echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ echo "... with $${FREQ}Hz input clock" @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale diff --git a/board/freescale/m5235evb/Makefile b/board/freescale/m5235evb/Makefile new file mode 100644 index 0000000..74c2528 --- /dev/null +++ b/board/freescale/m5235evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o mii.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5235evb/config.mk b/board/freescale/m5235evb/config.mk new file mode 100644 index 0000000..ada38dd --- /dev/null +++ b/board/freescale/m5235evb/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +/*TEXT_BASE = 0xFFC00000*/ +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) \ No newline at end of file diff --git a/board/freescale/m5235evb/m5235evb.c b/board/freescale/m5235evb/m5235evb.c new file mode 100644 index 0000000..585854c --- /dev/null +++ b/board/freescale/m5235evb/m5235evb.c @@ -0,0 +1,117 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M5235 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + u32 dramsize, i, dramclk; + + /* + * When booting from external Flash, the port-size is less than + * the port-size of SDRAM. In this case it is necessary to enable + * Data[15:0] on Port Address/Data. + */ + gpio->par_ad = + GPIO_PAR_AD_ADDR23 | GPIO_PAR_AD_ADDR22 | GPIO_PAR_AD_ADDR21 | + GPIO_PAR_AD_DATAL; + + /* Initialize PAR to enable SDRAM signals */ + gpio->par_sdram = + GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS | GPIO_PAR_SDRAM_SRAS | + GPIO_PAR_SDRAM_SCKE | GPIO_PAR_SDRAM_SDCS(3); + + dramsize = CFG_SDRAM_SIZE * 0x100000; + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + if (!(sdram->dacr0 & SDRAMC_DARCn_RE)) { + dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ); + + /* Initialize DRAM Control Register: DCR */ + sdram->dcr = SDRAMC_DCR_RTIM_9CLKS | + SDRAMC_DCR_RTIM_6CLKS | SDRAMC_DCR_RC((15 * dramclk) >> 4); + + /* Initialize DACR0 */ + sdram->dacr0 = + SDRAMC_DARCn_BA(CFG_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 | + SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32; + + /* Initialize DMR0 */ + sdram->dmr0 = ((dramsize - 1) & 0xFFFC0000) | SDRAMC_DMRn_V; + + /* Set IP (bit 3) in DACR */ + sdram->dacr0 |= SDRAMC_DARCn_IP; + + /* Wait 30ns to allow banks to precharge */ + for (i = 0; i < 5; i++) { + asm("nop"); + } + + /* Write to this block to initiate precharge */ + *(u32 *) (CFG_SDRAM_BASE) = 0xA5A59696; + + /* Set RE (bit 15) in DACR */ + sdram->dacr0 |= SDRAMC_DARCn_RE; + + /* Wait for at least 8 auto refresh cycles to occur */ + for (i = 0; i < 0x2000; i++) { + asm("nop"); + } + + /* Finish the configuration by issuing the MRS. */ + sdram->dacr0 |= SDRAMC_DARCn_IMRS; + + /* Write to the SDRAM Mode Register */ + *(u32 *) (CFG_SDRAM_BASE + 0x400) = 0xA5A59696; + } + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/freescale/m5235evb/mii.c b/board/freescale/m5235evb/mii.c new file mode 100644 index 0000000..58fabdf --- /dev/null +++ b/board/freescale/m5235evb/mii.c @@ -0,0 +1,307 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO); + } else { + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); + } + + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_KS8721BL "KS8721BL" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + strcpy(info->phy_name, + STR_ID_KS8721BL); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + printf(STR_ID_KS8721BL); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5235evb/u-boot.16 b/board/freescale/m5235evb/u-boot.16 new file mode 100644 index 0000000..8ffd326 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.16 @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu_init.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5235evb/u-boot.32 b/board/freescale/m5235evb/u-boot.32 new file mode 100644 index 0000000..9b72f66 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.32 @@ -0,0 +1,153 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu.o (.text) + cpu/mcf523x/cpu_init.o (.text) + cpu/mcf523x/interrupts.o (.text) + cpu/mcf523x/speed.o (.text) + lib_m68k/libm68k.a (.text) + common/dlmalloc.o (.text) + common/cmd_bootm.o (.text) + common/cmd_flash.o (.text) + common/cmd_elf.o (.text) + common/cmd_mem.o (.text) + common/console.o (.text) + common/main.o (.text) + lib_generic/libgeneric.a (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds new file mode 100644 index 0000000..8ffd326 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.lds @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu_init.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mcf523x/Makefile b/cpu/mcf523x/Makefile new file mode 100644 index 0000000..d0e9b45 --- /dev/null +++ b/cpu/mcf523x/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +# CFLAGS += -DET_DEBUG + +LIB = lib$(CPU).a + +START = start.o +COBJS = cpu.o speed.o cpu_init.o interrupts.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/mcf523x/config.mk b/cpu/mcf523x/config.mk new file mode 100644 index 0000000..ba324a8 --- /dev/null +++ b/cpu/mcf523x/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2003 Josef Baumgartner +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -ffixed-d7 -msep-data +PLATFORM_CPPFLAGS += -m5307 -fPIC diff --git a/cpu/mcf523x/cpu.c b/cpu/mcf523x/cpu.c new file mode 100644 index 0000000..f0d954b --- /dev/null +++ b/cpu/mcf523x/cpu.c @@ -0,0 +1,109 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; + + ccm->rcr = CCM_RCR_SOFTRST; + /* we don't return! */ + return 0; +}; + +int checkcpu(void) +{ + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; + u16 msk; + u16 id = 0; + u8 ver; + + puts("CPU: "); + msk = (ccm->cir >> 6); + ver = (ccm->cir & 0x003f); + switch (msk) { + case 0x31: + id = 5235; + break; + } + + if (id) { + printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, + ver); + printf(" CPU CLK %d Mhz BUS CLK %d Mhz\n", + (int)(gd->cpu_clk / 1000000), + (int)(gd->bus_clk / 1000000)); + } + + return 0; +}; + +#if defined(CONFIG_WATCHDOG) +/* Called by macro WATCHDOG_RESET */ +void watchdog_reset(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + wdp->sr = 0x5555; /* Count register */ + asm("nop"); + wdp->sr = 0xAAAA; /* Count register */ +} + +int watchdog_disable(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + /* UserManual, once the wdog is disabled, wdog cannot be re-enabled */ + wdp->cr |= WTM_WCR_HALTED; /* halted watchdog timer */ + + puts("WATCHDOG:disabled\n"); + return (0); +} + +int watchdog_init(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + u32 wdog_module = 0; + + /* set timeout and enable watchdog */ + wdog_module = ((CFG_CLK / CFG_HZ) * CONFIG_WATCHDOG_TIMEOUT); + wdog_module |= (wdog_module / 8192); + wdp->mr = wdog_module; + + wdp->cr = WTM_WCR_EN; + puts("WATCHDOG:enabled\n"); + + return (0); +} +#endif /* CONFIG_WATCHDOG */ diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c new file mode 100644 index 0000000..a31054d --- /dev/null +++ b/cpu/mcf523x/cpu_init.c @@ -0,0 +1,145 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + volatile wdog_t *wdog = (wdog_t *) MMAP_WDOG; + volatile scm_t *scm = (scm_t *) MMAP_SCM; + + /* watchdog is enabled by default - disable the watchdog */ +#ifndef CONFIG_WATCHDOG + wdog->cr = 0; +#endif + + scm->rambar = (CFG_INIT_RAM_ADDR | SCM_RAMBAR_BDE); + + /* Port configuration */ + gpio->par_cs = 0; + +#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL)) + fbcs->csar0 = CFG_CS0_BASE; + fbcs->cscr0 = CFG_CS0_CTRL; + fbcs->csmr0 = CFG_CS0_MASK; +#endif + +#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS1; + fbcs->csar1 = CFG_CS1_BASE; + fbcs->cscr1 = CFG_CS1_CTRL; + fbcs->csmr1 = CFG_CS1_MASK; +#endif + +#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS2; + fbcs->csar2 = CFG_CS2_BASE; + fbcs->cscr2 = CFG_CS2_CTRL; + fbcs->csmr2 = CFG_CS2_MASK; +#endif + +#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS3; + fbcs->csar3 = CFG_CS3_BASE; + fbcs->cscr3 = CFG_CS3_CTRL; + fbcs->csmr3 = CFG_CS3_MASK; +#endif + +#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS4; + fbcs->csar4 = CFG_CS4_BASE; + fbcs->cscr4 = CFG_CS4_CTRL; + fbcs->csmr4 = CFG_CS4_MASK; +#endif + +#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS5; + fbcs->csar5 = CFG_CS5_BASE; + fbcs->cscr5 = CFG_CS5_CTRL; + fbcs->csmr5 = CFG_CS5_MASK; +#endif + +#if (defined(CFG_CS6_BASE) && defined(CFG_CS6_MASK) && defined(CFG_CS6_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS6; + fbcs->csar6 = CFG_CS6_BASE; + fbcs->cscr6 = CFG_CS6_CTRL; + fbcs->csmr6 = CFG_CS6_MASK; +#endif + +#if (defined(CFG_CS7_BASE) && defined(CFG_CS7_MASK) && defined(CFG_CS7_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS7; + fbcs->csar7 = CFG_CS7_BASE; + fbcs->cscr7 = CFG_CS7_CTRL; + fbcs->csmr7 = CFG_CS7_MASK; +#endif + +#ifdef CONFIG_FSL_I2C + gpio->par_feci2c &= ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK); + gpio->par_feci2c |= (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA); +#endif + + icache_enable(); +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ + return (0); +} + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); + break; + case 2: + gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); + break; + } +} diff --git a/cpu/mcf523x/interrupts.c b/cpu/mcf523x/interrupts.c new file mode 100644 index 0000000..125c53b --- /dev/null +++ b/cpu/mcf523x/interrupts.c @@ -0,0 +1,49 @@ +/* + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* CPU specific interrupt routine */ +#include +#include + +int interrupt_init(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + /* Make sure all interrupts are disabled */ + intp->imrl0 |= 0x1; + + enable_interrupts(); + return 0; +} + +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + intp->imrl0 &= ~INTC_IPRL_INT0; + intp->imrl0 &= ~CFG_TMRINTR_MASK; +} +#endif diff --git a/cpu/mcf523x/speed.c b/cpu/mcf523x/speed.c new file mode 100644 index 0000000..509109d --- /dev/null +++ b/cpu/mcf523x/speed.c @@ -0,0 +1,48 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; +/* + * get_clocks() fills in gd->cpu_clock and gd->bus_clk + */ +int get_clocks(void) +{ + volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL); + + pll->syncr = PLL_SYNCR_MFD(1); + + while (!(pll->synsr & PLL_SYNSR_LOCK)); + + gd->bus_clk = CFG_CLK; + gd->cpu_clk = (gd->bus_clk * 2); + return (0); +} diff --git a/cpu/mcf523x/start.S b/cpu/mcf523x/start.S new file mode 100644 index 0000000..2bd603d --- /dev/null +++ b/cpu/mcf523x/start.S @@ -0,0 +1,340 @@ +/* + * Copyright (C) 2003 Josef Baumgartner + * Based on code from Bernhard Kuhn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include "version.h" + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + +#define _START _start +#define _FAULT _fault + +#define SAVE_ALL \ + move.w #0x2700,%sr; /* disable intrs */ \ + subl #60,%sp; /* space for 15 regs */ \ + moveml %d0-%d7/%a0-%a6,%sp@; + +#define RESTORE_ALL \ + moveml %sp@,%d0-%d7/%a0-%a6; \ + addl #60,%sp; /* space for 15 regs */ \ + rte; + +.text +/* + * Vector table. This is used for initial platform startup. + * These vectors are to catch any un-intended traps. + */ +_vectors: + +INITSP: .long 0x00000000 /* Initial SP */ +INITPC: .long _START /* Initial PC */ +vector02: .long _FAULT /* Access Error */ +vector03: .long _FAULT /* Address Error */ +vector04: .long _FAULT /* Illegal Instruction */ +vector05: .long _FAULT /* Reserved */ +vector06: .long _FAULT /* Reserved */ +vector07: .long _FAULT /* Reserved */ +vector08: .long _FAULT /* Privilege Violation */ +vector09: .long _FAULT /* Trace */ +vector0A: .long _FAULT /* Unimplemented A-Line */ +vector0B: .long _FAULT /* Unimplemented F-Line */ +vector0C: .long _FAULT /* Debug Interrupt */ +vector0D: .long _FAULT /* Reserved */ +vector0E: .long _FAULT /* Format Error */ +vector0F: .long _FAULT /* Unitialized Int. */ + +/* Reserved */ +vector10_17: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector18: .long _FAULT /* Spurious Interrupt */ +vector19: .long _FAULT /* Autovector Level 1 */ +vector1A: .long _FAULT /* Autovector Level 2 */ +vector1B: .long _FAULT /* Autovector Level 3 */ +vector1C: .long _FAULT /* Autovector Level 4 */ +vector1D: .long _FAULT /* Autovector Level 5 */ +vector1E: .long _FAULT /* Autovector Level 6 */ +vector1F: .long _FAULT /* Autovector Level 7 */ + +/* TRAP #0 - #15 */ +vector20_2F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +/* Reserved */ +vector30_3F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector64_127: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector128_191: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector192_255: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + + .text + + .globl _start +_start: + nop + nop + move.w #0x2700,%sr /* Mask off Interrupt */ + + /* Set vector base register at the beginning of the Flash */ + move.l #CFG_FLASH_BASE, %d0 + movec %d0, %VBR + + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 + + /* invalidate and disable cache */ + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + nop + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a2 + move.l %d0, (%a1) + move.l %d0, (%a2) + + /* set stackpointer to end of internal ram to get some stackspace for the + first c-code */ + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp + clr.l %sp@- + + move.l #__got_start, %a5 /* put relocation table address to a5 */ + + bsr cpu_init_f /* run low-level CPU init code (from flash) */ + bsr board_init_f /* run low-level board init code (from flash) */ + + /* board_init_f() does not return */ + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + link.w %a6,#0 + move.l 8(%a6), %sp /* set new stack pointer */ + + move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ + move.l 16(%a6), %a0 /* Save copy of Destination Address */ + + move.l #CFG_MONITOR_BASE, %a1 + move.l #__init_end, %a2 + move.l %a0, %a3 + + /* copy the code to RAM */ +1: + move.l (%a1)+, (%a3)+ + cmp.l %a1,%a2 + bgt.s 1b + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + move.l %a0, %a1 + add.l #(in_ram - CFG_MONITOR_BASE), %a1 + jmp (%a1) + +in_ram: + +clear_bss: + /* + * Now clear BSS segment + */ + move.l %a0, %a1 + add.l #(_sbss - CFG_MONITOR_BASE),%a1 + move.l %a0, %d1 + add.l #(_ebss - CFG_MONITOR_BASE),%d1 +6: + clr.l (%a1)+ + cmp.l %a1,%d1 + bgt.s 6b + + /* + * fix got table in RAM + */ + move.l %a0, %a1 + add.l #(__got_start - CFG_MONITOR_BASE),%a1 + move.l %a1,%a5 /* * fix got pointer register a5 */ + + move.l %a0, %a2 + add.l #(__got_end - CFG_MONITOR_BASE),%a2 + +7: + move.l (%a1),%d1 + sub.l #_start,%d1 + add.l %a0,%d1 + move.l %d1,(%a1)+ + cmp.l %a2, %a1 + bne 7b + + /* calculate relative jump to board_init_r in ram */ + move.l %a0, %a1 + add.l #(board_init_r - CFG_MONITOR_BASE), %a1 + + /* set parameters for board_init_r */ + move.l %a0,-(%sp) /* dest_addr */ + move.l %d0,-(%sp) /* gd */ + jsr (%a1) + +/*------------------------------------------------------------------------------*/ +/* exception code */ + .globl _fault +_fault: + jmp _fault + .globl _exc_handler + +_exc_handler: + SAVE_ALL + movel %sp,%sp@- + bsr exc_handler + addql #4,%sp + RESTORE_ALL + + .globl _int_handler +_int_handler: + SAVE_ALL + movel %sp,%sp@- + bsr int_handler + addql #4,%sp + RESTORE_ALL + +/*------------------------------------------------------------------------------*/ +/* cache functions */ + .globl icache_enable +icache_enable: + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + nop + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + move.l #(CFG_FLASH_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR1 /* Enable cache */ + + move.l #0x80400100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + nop + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + .globl icache_disable +icache_disable: + move.l #0x00000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Disable cache */ + clr.l %d0 /* Setup cache mask */ + movec %d0, %ACR0 + movec %d0, %ACR1 + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl icache_status +icache_status: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l (%a1), %d0 + rts + + .globl icache_invalid +icache_invalid: + move.l #0x80600100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + nop + rts + + .globl dcache_enable +dcache_enable: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + /* No dcache, just a dummy function */ + .globl dcache_disable +dcache_disable: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl dcache_status +dcache_status: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + move.l (%a1), %d0 + rts + +/*------------------------------------------------------------------------------*/ + + .globl version_string +version_string: + .ascii U_BOOT_VERSION + .ascii " (", __DATE__, " - ", __TIME__, ")" + .ascii CONFIG_IDENT_STRING, "\0" diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index d66c161..ffb9a37 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -26,6 +26,35 @@ #ifndef __IMMAP_H #define __IMMAP_H +#ifdef CONFIG_M5235 +#include +#include + +#define CFG_FEC0_IOBASE (MMAP_FEC) +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40)) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR3) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprl0) +#define CFG_TMRINTR_NO (INT0_LO_DTMR3) +#define CFG_TMRINTR_MASK (INTC_IPRL_INT22) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (0x1E) /* Level must include inorder to work */ +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CFG_UDELAY_BASE (MMAP_PIT0) +#define CFG_PIT_BASE (MMAP_PIT1) +#define CFG_PIT_PRESCALE (6) +#endif + +#define CFG_INTR_BASE (MMAP_INTC0) +#define CFG_NUM_IRQS (128) +#endif /* CONFIG_M5235 */ + #ifdef CONFIG_M5249 #include #include diff --git a/include/asm-m68k/immap_5235.h b/include/asm-m68k/immap_5235.h new file mode 100644 index 0000000..4a03450 --- /dev/null +++ b/include/asm-m68k/immap_5235.h @@ -0,0 +1,378 @@ +/* + * MCF5329 Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5235__ +#define __IMMAP_5235__ + +#define MMAP_SCM (CFG_MBAR + 0x00000000) +#define MMAP_SDRAM (CFG_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_MBAR + 0x00000080) +#define MMAP_DMA0 (CFG_MBAR + 0x00000100) +#define MMAP_DMA1 (CFG_MBAR + 0x00000110) +#define MMAP_DMA2 (CFG_MBAR + 0x00000120) +#define MMAP_DMA3 (CFG_MBAR + 0x00000130) +#define MMAP_UART0 (CFG_MBAR + 0x00000200) +#define MMAP_UART1 (CFG_MBAR + 0x00000240) +#define MMAP_UART2 (CFG_MBAR + 0x00000280) +#define MMAP_I2C (CFG_MBAR + 0x00000300) +#define MMAP_QSPI (CFG_MBAR + 0x00000340) +#define MMAP_DTMR0 (CFG_MBAR + 0x00000400) +#define MMAP_DTMR1 (CFG_MBAR + 0x00000440) +#define MMAP_DTMR2 (CFG_MBAR + 0x00000480) +#define MMAP_DTMR3 (CFG_MBAR + 0x000004C0) +#define MMAP_INTC0 (CFG_MBAR + 0x00000C00) +#define MMAP_INTC1 (CFG_MBAR + 0x00000D00) +#define MMAP_INTCACK (CFG_MBAR + 0x00000F00) +#define MMAP_FEC (CFG_MBAR + 0x00001000) +#define MMAP_FECFIFO (CFG_MBAR + 0x00001400) +#define MMAP_GPIO (CFG_MBAR + 0x00100000) +#define MMAP_CCM (CFG_MBAR + 0x00110000) +#define MMAP_PLL (CFG_MBAR + 0x00120000) +#define MMAP_EPORT (CFG_MBAR + 0x00130000) +#define MMAP_WDOG (CFG_MBAR + 0x00140000) +#define MMAP_PIT0 (CFG_MBAR + 0x00150000) +#define MMAP_PIT1 (CFG_MBAR + 0x00160000) +#define MMAP_PIT2 (CFG_MBAR + 0x00170000) +#define MMAP_PIT3 (CFG_MBAR + 0x00180000) +#define MMAP_MDHA (CFG_MBAR + 0x00190000) +#define MMAP_RNG (CFG_MBAR + 0x001A0000) +#define MMAP_SKHA (CFG_MBAR + 0x001B0000) +#define MMAP_CAN1 (CFG_MBAR + 0x001C0000) +#define MMAP_ETPU (CFG_MBAR + 0x001D0000) +#define MMAP_CAN2 (CFG_MBAR + 0x001F0000) + +/* System Control Module register */ +typedef struct scm_ctrl { + u32 ipsbar; /* 0x00 - MBAR */ + u32 res1; /* 0x04 */ + u32 rambar; /* 0x08 - RAMBAR */ + u32 res2; /* 0x0C */ + u8 crsr; /* 0x10 Core Reset Status Register */ + u8 cwcr; /* 0x11 Core Watchdog Control Register */ + u8 lpicr; /* 0x12 Low-Power Interrupt Control Register */ + u8 cwsr; /* 0x13 Core Watchdog Service Register */ + u32 dmareqc; /* 0x14 */ + u32 res3; /* 0x18 */ + u32 mpark; /* 0x1C */ + u8 mpr; /* 0x20 */ + u8 res4[3]; /* 0x21 - 0x23 */ + u8 pacr0; /* 0x24 */ + u8 pacr1; /* 0x25 */ + u8 pacr2; /* 0x26 */ + u8 pacr3; /* 0x27 */ + u8 pacr4; /* 0x28 */ + u32 res5; /* 0x29 */ + u8 pacr5; /* 0x2a */ + u8 pacr6; /* 0x2b */ + u8 pacr7; /* 0x2c */ + u32 res6; /* 0x2d */ + u8 pacr8; /* 0x2e */ + u32 res7; /* 0x2f */ + u8 gpacr; /* 0x30 */ + u8 res8[3]; /* 0x31 - 0x33 */ +} scm_t; + +/* SDRAM controller registers */ +typedef struct sdram_ctrl { + u16 dcr; /* 0x00 Control register */ + u16 res1[3]; /* 0x02 - 0x07 */ + u32 dacr0; /* 0x08 address and control register 0 */ + u32 dmr0; /* 0x0C mask register block 0 */ + u32 dacr1; /* 0x10 address and control register 1 */ + u32 dmr1; /* 0x14 mask register block 1 */ +} sdram_t; + +/* Flexbus module Chip select registers */ +typedef struct fbcs_ctrl { + u16 csar0; /* 0x00 Chip-Select Address Register 0 */ + u16 res0; + u32 csmr0; /* 0x04 Chip-Select Mask Register 0 */ + u16 res1; /* 0x08 */ + u16 cscr0; /* 0x0A Chip-Select Control Register 0 */ + + u16 csar1; /* 0x0C Chip-Select Address Register 1 */ + u16 res2; + u32 csmr1; /* 0x10 Chip-Select Mask Register 1 */ + u16 res3; /* 0x14 */ + u16 cscr1; /* 0x16 Chip-Select Control Register 1 */ + + u16 csar2; /* 0x18 Chip-Select Address Register 2 */ + u16 res4; + u32 csmr2; /* 0x1C Chip-Select Mask Register 2 */ + u16 res5; /* 0x20 */ + u16 cscr2; /* 0x22 Chip-Select Control Register 2 */ + + u16 csar3; /* 0x24 Chip-Select Address Register 3 */ + u16 res6; + u32 csmr3; /* 0x28 Chip-Select Mask Register 3 */ + u16 res7; /* 0x2C */ + u16 cscr3; /* 0x2E Chip-Select Control Register 3 */ + + u16 csar4; /* 0x30 Chip-Select Address Register 4 */ + u16 res8; + u32 csmr4; /* 0x34 Chip-Select Mask Register 4 */ + u16 res9; /* 0x38 */ + u16 cscr4; /* 0x3A Chip-Select Control Register 4 */ + + u16 csar5; /* 0x3C Chip-Select Address Register 5 */ + u16 res10; + u32 csmr5; /* 0x40 Chip-Select Mask Register 5 */ + u16 res11; /* 0x44 */ + u16 cscr5; /* 0x46 Chip-Select Control Register 5 */ + + u16 csar6; /* 0x48 Chip-Select Address Register 5 */ + u16 res12; + u32 csmr6; /* 0x4C Chip-Select Mask Register 5 */ + u16 res13; /* 0x50 */ + u16 cscr6; /* 0x52 Chip-Select Control Register 5 */ + + u16 csar7; /* 0x54 Chip-Select Address Register 5 */ + u16 res14; + u32 csmr7; /* 0x58 Chip-Select Mask Register 5 */ + u16 res15; /* 0x5C */ + u16 cscr7; /* 0x5E Chip-Select Control Register 5 */ +} fbcs_t; + +/* QSPI module registers */ +typedef struct qspi_ctrl { + u16 qmr; /* Mode register */ + u16 res1; + u16 qdlyr; /* Delay register */ + u16 res2; + u16 qwr; /* Wrap register */ + u16 res3; + u16 qir; /* Interrupt register */ + u16 res4; + u16 qar; /* Address register */ + u16 res5; + u16 qdr; /* Data register */ + u16 res6; +} qspi_t; + +/* Interrupt module registers */ +typedef struct int0_ctrl { + /* Interrupt Controller 0 */ + u32 iprh0; /* 0x00 Pending Register High */ + u32 iprl0; /* 0x04 Pending Register Low */ + u32 imrh0; /* 0x08 Mask Register High */ + u32 imrl0; /* 0x0C Mask Register Low */ + u32 frch0; /* 0x10 Force Register High */ + u32 frcl0; /* 0x14 Force Register Low */ + u8 irlr; /* 0x18 */ + u8 iacklpr; /* 0x19 */ + u16 res1[19]; /* 0x1a - 0x3c */ + u8 icr0[64]; /* 0x40 - 0x7F Control registers */ + u32 res3[24]; /* 0x80 - 0xDF */ + u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ + u8 res4[3]; /* 0xE1 - 0xE3 */ + u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res5[3]; /* 0xE5 - 0xE7 */ + u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE9 - 0xEB */ + u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xED - 0xEF */ + u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xF1 - 0xF3 */ + u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF5 - 0xF7 */ + u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF9 - 0xFB */ + u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xFD - 0xFF */ +} int0_t; + +typedef struct int1_ctrl { + /* Interrupt Controller 1 */ + u32 iprh1; /* 0x00 Pending Register High */ + u32 iprl1; /* 0x04 Pending Register Low */ + u32 imrh1; /* 0x08 Mask Register High */ + u32 imrl1; /* 0x0C Mask Register Low */ + u32 frch1; /* 0x10 Force Register High */ + u32 frcl1; /* 0x14 Force Register Low */ + u8 irlr; /* 0x18 */ + u8 iacklpr; /* 0x19 */ + u16 res1[19]; /* 0x1a - 0x3c */ + u8 icr1[64]; /* 0x40 - 0x7F */ + u32 res4[24]; /* 0x80 - 0xDF */ + u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */ + u8 res5[3]; /* 0xE1 - 0xE3 */ + u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE5 - 0xE7 */ + u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xE9 - 0xEB */ + u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xED - 0xEF */ + u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF1 - 0xF3 */ + u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF5 - 0xF7 */ + u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xF9 - 0xFB */ + u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resc[3]; /* 0xFD - 0xFF */ +} int1_t; + +typedef struct intgack_ctrl1 { + /* Global IACK Registers */ + u8 swiack; /* 0xE0 Global Software Interrupt Acknowledge */ + u8 Lniack[7]; /* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */ +} intgack_t; + +/* GPIO port registers */ +typedef struct gpio_ctrl { + /* Port Output Data Registers */ + u8 podr_addr; /* 0x00 */ + u8 podr_datah; /* 0x01 */ + u8 podr_datal; /* 0x02 */ + u8 podr_busctl; /* 0x03 */ + u8 podr_bs; /* 0x04 */ + u8 podr_cs; /* 0x05 */ + u8 podr_sdram; /* 0x06 */ + u8 podr_feci2c; /* 0x07 */ + u8 podr_uarth; /* 0x08 */ + u8 podr_uartl; /* 0x09 */ + u8 podr_qspi; /* 0x0A */ + u8 podr_timer; /* 0x0B */ + u8 podr_etpu; /* 0x0C */ + u8 res1[3]; /* 0x0D - 0x0F */ + + /* Port Data Direction Registers */ + u8 pddr_addr; /* 0x10 */ + u8 pddr_datah; /* 0x11 */ + u8 pddr_datal; /* 0x12 */ + u8 pddr_busctl; /* 0x13 */ + u8 pddr_bs; /* 0x14 */ + u8 pddr_cs; /* 0x15 */ + u8 pddr_sdram; /* 0x16 */ + u8 pddr_feci2c; /* 0x17 */ + u8 pddr_uarth; /* 0x18 */ + u8 pddr_uartl; /* 0x19 */ + u8 pddr_qspi; /* 0x1A */ + u8 pddr_timer; /* 0x1B */ + u8 pddr_etpu; /* 0x1C */ + u8 res2[3]; /* 0x1D - 0x1F */ + + /* Port Data Direction Registers */ + u8 ppdsdr_addr; /* 0x20 */ + u8 ppdsdr_datah; /* 0x21 */ + u8 ppdsdr_datal; /* 0x22 */ + u8 ppdsdr_busctl; /* 0x23 */ + u8 ppdsdr_bs; /* 0x24 */ + u8 ppdsdr_cs; /* 0x25 */ + u8 ppdsdr_sdram; /* 0x26 */ + u8 ppdsdr_feci2c; /* 0x27 */ + u8 ppdsdr_uarth; /* 0x28 */ + u8 ppdsdr_uartl; /* 0x29 */ + u8 ppdsdr_qspi; /* 0x2A */ + u8 ppdsdr_timer; /* 0x2B */ + u8 ppdsdr_etpu; /* 0x2C */ + u8 res3[3]; /* 0x2D - 0x2F */ + + /* Port Clear Output Data Registers */ + u8 pclrr_addr; /* 0x30 */ + u8 pclrr_datah; /* 0x31 */ + u8 pclrr_datal; /* 0x32 */ + u8 pclrr_busctl; /* 0x33 */ + u8 pclrr_bs; /* 0x34 */ + u8 pclrr_cs; /* 0x35 */ + u8 pclrr_sdram; /* 0x36 */ + u8 pclrr_feci2c; /* 0x37 */ + u8 pclrr_uarth; /* 0x38 */ + u8 pclrr_uartl; /* 0x39 */ + u8 pclrr_qspi; /* 0x3A */ + u8 pclrr_timer; /* 0x3B */ + u8 pclrr_etpu; /* 0x3C */ + u8 res4[3]; /* 0x3D - 0x3F */ + + /* Pin Assignment Registers */ + u8 par_ad; /* 0x40 */ + u8 res5; /* 0x41 */ + u16 par_busctl; /* 0x42 */ + u8 par_bs; /* 0x44 */ + u8 par_cs; /* 0x45 */ + u8 par_sdram; /* 0x46 */ + u8 par_feci2c; /* 0x47 */ + u16 par_uart; /* 0x48 */ + u8 par_qspi; /* 0x4A */ + u8 res6; /* 0x4B */ + u16 par_timer; /* 0x4C */ + u8 par_etpu; /* 0x4E */ + u8 res7; /* 0x4F */ + + /* Drive Strength Control Registers */ + u8 dscr_eim; /* 0x50 */ + u8 dscr_etpu; /* 0x51 */ + u8 dscr_feci2c; /* 0x52 */ + u8 dscr_uart; /* 0x53 */ + u8 dscr_qspi; /* 0x54 */ + u8 dscr_timer; /* 0x55 */ + u16 res8; /* 0x56 */ +} gpio_t; + +/*Chip configuration module registers */ +typedef struct ccm_ctrl { + u8 rcr; /* 0x01 */ + u8 rsr; /* 0x02 */ + u16 res1; /* 0x03 */ + u16 ccr; /* 0x04 Chip configuration register */ + u16 lpcr; /* 0x06 Low-power Control register */ + u16 rcon; /* 0x08 Rreset configuration register */ + u16 cir; /* 0x0a Chip identification register */ +} ccm_t; + +/* Clock Module registers */ +typedef struct pll_ctrl { + u32 syncr; /* 0x00 synthesizer control register */ + u32 synsr; /* 0x04 synthesizer status register */ +} pll_t; + +/* Watchdog registers */ +typedef struct wdog_ctrl { + u16 cr; /* 0x00 Control register */ + u16 mr; /* 0x02 Modulus register */ + u16 cntr; /* 0x04 Count register */ + u16 sr; /* 0x06 Service register */ +} wdog_t; + +/* FlexCan module registers */ +typedef struct can_ctrl { + u32 mcr; /* 0x00 Module Configuration register */ + u32 ctrl; /* 0x04 Control register */ + u32 timer; /* 0x08 Free Running Timer */ + u32 res1; /* 0x0C */ + u32 rxgmask; /* 0x10 Rx Global Mask */ + u32 rx14mask; /* 0x14 RxBuffer 14 Mask */ + u32 rx15mask; /* 0x18 RxBuffer 15 Mask */ + u32 errcnt; /* 0x1C Error Counter Register */ + u32 errstat; /* 0x20 Error and status Register */ + u32 res2; /* 0x24 */ + u32 imask; /* 0x28 Interrupt Mask Register */ + u32 res3; /* 0x2C */ + u32 iflag; /* 0x30 Interrupt Flag Register */ + u32 res4[19]; /* 0x34 - 0x7F */ + u32 MB0_15[2048]; /* 0x80 Message Buffer 0-15 */ +} can_t; + +#endif /* __IMMAP_5235__ */ diff --git a/include/asm-m68k/m5235.h b/include/asm-m68k/m5235.h new file mode 100644 index 0000000..b98b452 --- /dev/null +++ b/include/asm-m68k/m5235.h @@ -0,0 +1,905 @@ +/* + * mcf5329.h -- Definitions for Freescale Coldfire 5329 + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef mcf5235_h +#define mcf5235_h +/****************************************************************************/ + +/********************************************************************* +* System Control Module (SCM) +*********************************************************************/ + +/* Bit definition and macros for SCM_IPSBAR */ +#define SCM_IPSBAR_BA(x) (((x)&0x03)<<30) +#define SCM_IPSBAR_V (0x00000001) + +/* Bit definition and macros for SCM_RAMBAR */ +#define SCM_RAMBAR_BA(x) (((x)&0xFFFF)<<16) +#define SCM_RAMBAR_BDE (0x00000200) + +/* Bit definition and macros for SCM_CRSR */ +#define SCM_CRSR_EXT (0x80) + +/* Bit definitions and macros for SCM_CWCR */ +#define SCM_CWCR_CWE (0x80) +#define SCM_CWCR_CWRI (0x40) +#define SCM_CWCR_CWT(x) (((x)&0x07)<<3) +#define SCM_CWCR_CWTA (0x04) +#define SCM_CWCR_CWTAVAL (0x02) +#define SCM_CWCR_CWTIC (0x01) + +/* Bit definitions and macros for SCM_LPICR */ +#define SCM_LPICR_ENBSTOP (0x80) +#define SCM_LPICR_XLPM_IPL(x) (((x)&0x07)<<4) +#define SCM_LPICR_XLPM_IPL_ANY (0x00) +#define SCM_LPICR_XLPM_IPL_L2_7 (0x10) +#define SCM_LPICR_XLPM_IPL_L3_7 (0x20) +#define SCM_LPICR_XLPM_IPL_L4_7 (0x30) +#define SCM_LPICR_XLPM_IPL_L5_7 (0x40) +#define SCM_LPICR_XLPM_IPL_L6_7 (0x50) +#define SCM_LPICR_XLPM_IPL_L7 (0x70) + +/* Bit definitions and macros for SCM_DMAREQC */ +#define SCM_DMAREQC_EXT(x) (((x)&0x0F)<<16) +#define SCM_DMAREQC_EXT_ETPU (0x00080000) +#define SCM_DMAREQC_EXT_EXTDREQ2 (0x00040000) +#define SCM_DMAREQC_EXT_EXTDREQ1 (0x00020000) +#define SCM_DMAREQC_EXT_EXTDREQ0 (0x00010000) +#define SCM_DMAREQC_DMAC3(x) (((x)&0x0F)<<12) +#define SCM_DMAREQC_DMAC2(x) (((x)&0x0F)<<8) +#define SCM_DMAREQC_DMAC1(x) (((x)&0x0F)<<4) +#define SCM_DMAREQC_DMAC0(x) (((x)&0x0F)) +#define SCM_DMAREQC_DMACn_DTMR0 (0x04) +#define SCM_DMAREQC_DMACn_DTMR1 (0x05) +#define SCM_DMAREQC_DMACn_DTMR2 (0x06) +#define SCM_DMAREQC_DMACn_DTMR3 (0x07) +#define SCM_DMAREQC_DMACn_UART0RX (0x08) +#define SCM_DMAREQC_DMACn_UART1RX (0x09) +#define SCM_DMAREQC_DMACn_UART2RX (0x0A) +#define SCM_DMAREQC_DMACn_UART0TX (0x0C) +#define SCM_DMAREQC_DMACn_UART1TX (0x0D) +#define SCM_DMAREQC_DMACn_UART3TX (0x0E) + +/* Bit definitions and macros for SCM_MPARK */ +#define SCM_MPARK_M2_P_EN (0x02000000) +#define SCM_MPARK_M3_PRTY_MSK (0x00C00000) +#define SCM_MPARK_M3_PRTY_4TH (0x00000000) +#define SCM_MPARK_M3_PRTY_3RD (0x00400000) +#define SCM_MPARK_M3_PRTY_2ND (0x00800000) +#define SCM_MPARK_M3_PRTY_1ST (0x00C00000) +#define SCM_MPARK_M2_PRTY_MSK (0x00300000) +#define SCM_MPARK_M2_PRTY_4TH (0x00000000) +#define SCM_MPARK_M2_PRTY_3RD (0x00100000) +#define SCM_MPARK_M2_PRTY_2ND (0x00200000) +#define SCM_MPARK_M2_PRTY_1ST (0x00300000) +#define SCM_MPARK_M0_PRTY_MSK (0x000C0000) +#define SCM_MPARK_M0_PRTY_4TH (0x00000000) +#define SCM_MPARK_M0_PRTY_3RD (0x00040000) +#define SCM_MPARK_M0_PRTY_2ND (0x00080000) +#define SCM_MPARK_M0_PRTY_1ST (0x000C0000) +#define SCM_MPARK_FIXED (0x00004000) +#define SCM_MPARK_TIMEOUT (0x00002000) +#define SCM_MPARK_PRKLAST (0x00001000) +#define SCM_MPARK_LCKOUT_TIME(x) (((x)&0x0F)<<8) + +/* Bit definitions and macros for SCM_MPR */ +#define SCM_MPR_MPR3 (0x08) +#define SCM_MPR_MPR2 (0x04) +#define SCM_MPR_MPR1 (0x02) +#define SCM_MPR_MPR0 (0x01) + +/* Bit definitions and macros for SCM_PACRn */ +#define SCM_PACRn_LOCK1 (0x80) +#define SCM_PACRn_ACCESSCTRL1(x) (((x)&0x07)<<4) +#define SCM_PACRn_LOCK0 (0x08) +#define SCM_PACRn_ACCESSCTRL0(x) (((x)&0x07)) + +/* Bit definitions and macros for SCM_GPACR */ +#define SCM_PACRn_LOCK (0x80) +#define SCM_PACRn_ACCESSCTRL0(x) (((x)&0x07)) + +/********************************************************************* +* SDRAM Controller (SDRAMC) +*********************************************************************/ +/* Bit definitions and macros for SDRAMC_DCR */ +#define SDRAMC_DCR_NAM (0x2000) +#define SDRAMC_DCR_COC (0x1000) +#define SDRAMC_DCR_IS (0x0800) +#define SDRAMC_DCR_RTIM_MASK (0x0C00) +#define SDRAMC_DCR_RTIM_3CLKS (0x0000) +#define SDRAMC_DCR_RTIM_6CLKS (0x0200) +#define SDRAMC_DCR_RTIM_9CLKS (0x0400) +#define SDRAMC_DCR_RC(x) (((x)&0xFF)<<8) + +/* Bit definitions and macros for SDRAMC_DARCn */ +#define SDRAMC_DARCn_BA(x) (((x)&0xFFFC)<<18) +#define SDRAMC_DARCn_RE (0x00008000) +#define SDRAMC_DARCn_CASL_MASK (0x00003000) +#define SDRAMC_DARCn_CASL_C0 (0x00000000) +#define SDRAMC_DARCn_CASL_C1 (0x00001000) +#define SDRAMC_DARCn_CASL_C2 (0x00002000) +#define SDRAMC_DARCn_CASL_C3 (0x00003000) +#define SDRAMC_DARCn_CBM_MASK (0x00000700) +#define SDRAMC_DARCn_CBM_CMD17 (0x00000000) +#define SDRAMC_DARCn_CBM_CMD18 (0x00000100) +#define SDRAMC_DARCn_CBM_CMD19 (0x00000200) +#define SDRAMC_DARCn_CBM_CMD20 (0x00000300) +#define SDRAMC_DARCn_CBM_CMD21 (0x00000400) +#define SDRAMC_DARCn_CBM_CMD22 (0x00000500) +#define SDRAMC_DARCn_CBM_CMD23 (0x00000600) +#define SDRAMC_DARCn_CBM_CMD24 (0x00000700) +#define SDRAMC_DARCn_IMRS (0x00000040) +#define SDRAMC_DARCn_PS_MASK (0x00000030) +#define SDRAMC_DARCn_PS_32 (0x00000000) +#define SDRAMC_DARCn_PS_16 (0x00000010) +#define SDRAMC_DARCn_PS_8 (0x00000020) +#define SDRAMC_DARCn_IP (0x00000008) + +/* Bit definitions and macros for SDRAMC_DMRn */ +#define SDRAMC_DMRn_BAM(x) (((x)&0x3FFF)<<18) +#define SDRAMC_DMRn_WP (0x00000100) +#define SDRAMC_DMRn_V (0x00000001) + +/********************************************************************* +* FlexBus Chip Selects (FBCS) +*********************************************************************/ +/* Bit definitions and macros for FBCS_CSMR */ +#define FBCS_CSMR_BAM(x) (((x)&0xFFFF)<<16) +#define FBCS_CSMR_BAM_4G (0xFFFF0000) +#define FBCS_CSMR_BAM_2G (0x7FFF0000) +#define FBCS_CSMR_BAM_1G (0x3FFF0000) +#define FBCS_CSMR_BAM_1024M (0x3FFF0000) +#define FBCS_CSMR_BAM_512M (0x1FFF0000) +#define FBCS_CSMR_BAM_256M (0x0FFF0000) +#define FBCS_CSMR_BAM_128M (0x07FF0000) +#define FBCS_CSMR_BAM_64M (0x03FF0000) +#define FBCS_CSMR_BAM_32M (0x01FF0000) +#define FBCS_CSMR_BAM_16M (0x00FF0000) +#define FBCS_CSMR_BAM_8M (0x007F0000) +#define FBCS_CSMR_BAM_4M (0x003F0000) +#define FBCS_CSMR_BAM_2M (0x001F0000) +#define FBCS_CSMR_BAM_1M (0x000F0000) +#define FBCS_CSMR_BAM_1024K (0x000F0000) +#define FBCS_CSMR_BAM_512K (0x00070000) +#define FBCS_CSMR_BAM_256K (0x00030000) +#define FBCS_CSMR_BAM_128K (0x00010000) +#define FBCS_CSMR_BAM_64K (0x00000000) +#define FBCS_CSMR_WP (0x00000100) +#define FBCS_CSMR_V (0x00000001) + +/* Bit definitions and macros for FBCS_CSCR */ +#define FBCS_CSCR_SRWS(x) (((x)&0x03)<<14) +#define FBCS_CSCR_IWS(x) (((x)&0x0F)<<10) +#define FBCS_CSCR_AA (0x0100) +#define FBCS_CSCR_PS_MASK (0x00C0) +#define FBCS_CSCR_PS_32 (0x0000) +#define FBCS_CSCR_PS_16 (0x0080) +#define FBCS_CSCR_PS_8 (0x0040) +#define FBCS_CSCR_BEM (0x0020) +#define FBCS_CSCR_BSTR (0x0010) +#define FBCS_CSCR_BSTW (0x0008) +#define FBCS_CSCR_SWWS(x) ((x)&0x07) + +/********************************************************************* +* Queued Serial Peripheral Interface (QSPI) +*********************************************************************/ +/* Bit definitions and macros for QSPI_QMR */ +#define QSPI_QMR_MSTR (0x8000) +#define QSPI_QMR_DOHIE (0x4000) +#define QSPI_QMR_BITS(x) (((x)&0x000F)<<10) +#define QSPI_QMR_CPOL (0x0200) +#define QSPI_QMR_CPHA (0x0100) +#define QSPI_QMR_BAUD(x) ((x)&0x00FF) + +/* Bit definitions and macros for QSPI_QDLYR */ +#define QSPI_QDLYR_SPE (0x8000) +#define QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) +#define QSPI_QDLYR_DTL(x) ((x)&0x00FF) + +/* Bit definitions and macros for QSPI_QWR */ +#define QSPI_QWR_HALT (0x8000) +#define QSPI_QWR_WREN (0x4000) +#define QSPI_QWR_WRTO (0x2000) +#define QSPI_QWR_CSIV (0x1000) +#define QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) +#define QSPI_QWR_NEWQP(x) ((x)&0x000F) + +/* Bit definitions and macros for QSPI_QIR */ +#define QSPI_QIR_WCEFB (0x8000) +#define QSPI_QIR_ABRTB (0x4000) +#define QSPI_QIR_ABRTL (0x1000) +#define QSPI_QIR_WCEFE (0x0800) +#define QSPI_QIR_ABRTE (0x0400) +#define QSPI_QIR_SPIFE (0x0100) +#define QSPI_QIR_WCEF (0x0008) +#define QSPI_QIR_ABRT (0x0004) +#define QSPI_QIR_SPIF (0x0001) + +/* Bit definitions and macros for QSPI_QAR */ +#define QSPI_QAR_ADDR(x) ((x)&0x003F) + +/* Bit definitions and macros for QSPI_QDR */ +#define QSPI_QDR_CONT (0x8000) +#define QSPI_QDR_BITSE (0x4000) +#define QSPI_QDR_DT (0x2000) +#define QSPI_QDR_DSCK (0x1000) +#define QSPI_QDR_QSPI_CS3 (0x0800) +#define QSPI_QDR_QSPI_CS2 (0x0400) +#define QSPI_QDR_QSPI_CS1 (0x0200) +#define QSPI_QDR_QSPI_CS0 (0x0100) + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_SCM (8) +#define INT0_LO_DMA0 (9) +#define INT0_LO_DMA1 (10) +#define INT0_LO_DMA2 (11) +#define INT0_LO_DMA3 (12) +#define INT0_LO_UART0 (13) +#define INT0_LO_UART1 (14) +#define INT0_LO_UART2 (15) +#define INT0_LO_RSVD1 (16) +#define INT0_LO_I2C (17) +#define INT0_LO_QSPI (18) +#define INT0_LO_DTMR0 (19) +#define INT0_LO_DTMR1 (20) +#define INT0_LO_DTMR2 (21) +#define INT0_LO_DTMR3 (22) +#define INT0_LO_FEC_TXF (23) +#define INT0_LO_FEC_TXB (24) +#define INT0_LO_FEC_UN (25) +#define INT0_LO_FEC_RL (26) +#define INT0_LO_FEC_RXF (27) +#define INT0_LO_FEC_RXB (28) +#define INT0_LO_FEC_MII (29) +#define INT0_LO_FEC_LC (30) +#define INT0_LO_FEC_HBERR (31) +#define INT0_HI_FEC_GRA (32) +#define INT0_HI_FEC_EBERR (33) +#define INT0_HI_FEC_BABT (34) +#define INT0_HI_FEC_BABR (35) +#define INT0_HI_PIT0 (36) +#define INT0_HI_PIT1 (37) +#define INT0_HI_PIT2 (38) +#define INT0_HI_PIT3 (39) +#define INT0_HI_RNG (40) +#define INT0_HI_SKHA (41) +#define INT0_HI_MDHA (42) +#define INT0_HI_CAN1_BUF0I (43) +#define INT0_HI_CAN1_BUF1I (44) +#define INT0_HI_CAN1_BUF2I (45) +#define INT0_HI_CAN1_BUF3I (46) +#define INT0_HI_CAN1_BUF4I (47) +#define INT0_HI_CAN1_BUF5I (48) +#define INT0_HI_CAN1_BUF6I (49) +#define INT0_HI_CAN1_BUF7I (50) +#define INT0_HI_CAN1_BUF8I (51) +#define INT0_HI_CAN1_BUF9I (52) +#define INT0_HI_CAN1_BUF10I (53) +#define INT0_HI_CAN1_BUF11I (54) +#define INT0_HI_CAN1_BUF12I (55) +#define INT0_HI_CAN1_BUF13I (56) +#define INT0_HI_CAN1_BUF14I (57) +#define INT0_HI_CAN1_BUF15I (58) +#define INT0_HI_CAN1_ERRINT (59) +#define INT0_HI_CAN1_BOFFINT (60) +/* 60-63 Reserved */ + +/* 0 - 7 Reserved */ +#define INT1_LO_CAN1_BUF0I (8) +#define INT1_LO_CAN1_BUF1I (9) +#define INT1_LO_CAN1_BUF2I (10) +#define INT1_LO_CAN1_BUF3I (11) +#define INT1_LO_CAN1_BUF4I (12) +#define INT1_LO_CAN1_BUF5I (13) +#define INT1_LO_CAN1_BUF6I (14) +#define INT1_LO_CAN1_BUF7I (15) +#define INT1_LO_CAN1_BUF8I (16) +#define INT1_LO_CAN1_BUF9I (17) +#define INT1_LO_CAN1_BUF10I (18) +#define INT1_LO_CAN1_BUF11I (19) +#define INT1_LO_CAN1_BUF12I (20) +#define INT1_LO_CAN1_BUF13I (21) +#define INT1_LO_CAN1_BUF14I (22) +#define INT1_LO_CAN1_BUF15I (23) +#define INT1_LO_CAN1_ERRINT (24) +#define INT1_LO_CAN1_BOFFINT (25) +/* 26 Reserved */ +#define INT1_LO_ETPU_TC0F (27) +#define INT1_LO_ETPU_TC1F (28) +#define INT1_LO_ETPU_TC2F (29) +#define INT1_LO_ETPU_TC3F (30) +#define INT1_LO_ETPU_TC4F (31) +#define INT1_HI_ETPU_TC5F (32) +#define INT1_HI_ETPU_TC6F (33) +#define INT1_HI_ETPU_TC7F (34) +#define INT1_HI_ETPU_TC8F (35) +#define INT1_HI_ETPU_TC9F (36) +#define INT1_HI_ETPU_TC10F (37) +#define INT1_HI_ETPU_TC11F (38) +#define INT1_HI_ETPU_TC12F (39) +#define INT1_HI_ETPU_TC13F (40) +#define INT1_HI_ETPU_TC14F (41) +#define INT1_HI_ETPU_TC15F (42) +#define INT1_HI_ETPU_TC16F (43) +#define INT1_HI_ETPU_TC17F (44) +#define INT1_HI_ETPU_TC18F (45) +#define INT1_HI_ETPU_TC19F (46) +#define INT1_HI_ETPU_TC20F (47) +#define INT1_HI_ETPU_TC21F (48) +#define INT1_HI_ETPU_TC22F (49) +#define INT1_HI_ETPU_TC23F (50) +#define INT1_HI_ETPU_TC24F (51) +#define INT1_HI_ETPU_TC25F (52) +#define INT1_HI_ETPU_TC26F (53) +#define INT1_HI_ETPU_TC27F (54) +#define INT1_HI_ETPU_TC28F (55) +#define INT1_HI_ETPU_TC29F (56) +#define INT1_HI_ETPU_TC30F (57) +#define INT1_HI_ETPU_TC31F (58) +#define INT1_HI_ETPU_TGIF (59) + +/* Bit definitions and macros for INTC_IPRH */ +#define INTC_IPRH_INT63 (0x80000000) +#define INTC_IPRH_INT62 (0x40000000) +#define INTC_IPRH_INT61 (0x20000000) +#define INTC_IPRH_INT60 (0x10000000) +#define INTC_IPRH_INT59 (0x08000000) +#define INTC_IPRH_INT58 (0x04000000) +#define INTC_IPRH_INT57 (0x02000000) +#define INTC_IPRH_INT56 (0x01000000) +#define INTC_IPRH_INT55 (0x00800000) +#define INTC_IPRH_INT54 (0x00400000) +#define INTC_IPRH_INT53 (0x00200000) +#define INTC_IPRH_INT52 (0x00100000) +#define INTC_IPRH_INT51 (0x00080000) +#define INTC_IPRH_INT50 (0x00040000) +#define INTC_IPRH_INT49 (0x00020000) +#define INTC_IPRH_INT48 (0x00010000) +#define INTC_IPRH_INT47 (0x00008000) +#define INTC_IPRH_INT46 (0x00004000) +#define INTC_IPRH_INT45 (0x00002000) +#define INTC_IPRH_INT44 (0x00001000) +#define INTC_IPRH_INT43 (0x00000800) +#define INTC_IPRH_INT42 (0x00000400) +#define INTC_IPRH_INT41 (0x00000200) +#define INTC_IPRH_INT40 (0x00000100) +#define INTC_IPRH_INT39 (0x00000080) +#define INTC_IPRH_INT38 (0x00000040) +#define INTC_IPRH_INT37 (0x00000020) +#define INTC_IPRH_INT36 (0x00000010) +#define INTC_IPRH_INT35 (0x00000008) +#define INTC_IPRH_INT34 (0x00000004) +#define INTC_IPRH_INT33 (0x00000002) +#define INTC_IPRH_INT32 (0x00000001) + +/* Bit definitions and macros for INTC_IPRL */ +#define INTC_IPRL_INT31 (0x80000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT0 (0x00000001) + +/* Bit definitions and macros for INTC_IRLR */ +#define INTC_IRLRn(x) (((x)&0x7F)<<1) + +/* Bit definitions and macros for INTC_IACKLPRn */ +#define INTC_IACKLPRn_LEVEL(x) (((x)&0x07)<<4) +#define INTC_IACKLPRn_PRI(x) ((x)&0x0F) + +/* Bit definitions and macros for INTC_ICRnx */ +#define INTC_ICRnx_IL(x) (((x)&0x07)<<3) +#define INTC_ICRnx_IP(x) ((x)&0x07) + +/********************************************************************* +* General Purpose I/O (GPIO) +*********************************************************************/ +/* Bit definitions and macros for GPIO_PODR */ +#define GPIO_PODR_ADDR(x) (((x)&0x07)<<5) +#define GPIO_PODR_ADDR_MASK (0xE0) +#define GPIO_PODR_BS(x) ((x)&0x0F) +#define GPIO_PODR_BS_MASK (0x0F) +#define GPIO_PODR_CS(x) (((x)&0x7F)<<1) +#define GPIO_PODR_CS_MASK (0xFE) +#define GPIO_PODR_SDRAM(X) ((x)&0x3F) +#define GPIO_PODR_SDRAM_MASK (0x3F) +#define GPIO_PODR_FECI2C(x) GPIO_PODR_BS(x) +#define GPIO_PODR_FECI2C_MASK GPIO_PODR_BS_MASK +#define GPIO_PODR_UARTH(x) ((x)&0x03) +#define GPIO_PODR_UARTH_MASK (0x03) +#define GPIO_PODR_QSPI(x) ((x)&0x1F) +#define GPIO_PODR_QSPI_MASK (0x1F) +#define GPIO_PODR_ETPU(x) ((x)&0x07) +#define GPIO_PODR_ETPU_MASK (0x07) + +/* Bit definitions and macros for GPIO_PDDR */ +#define GPIO_PDDR_ADDR(x) GPIO_PODR_ADDR(x) +#define GPIO_PDDR_ADDR_MASK GPIO_PODR_ADDR_MASK +#define GPIO_PDDR_BS(x) GPIO_PODR_BS(x) +#define GPIO_PDDR_BS_MASK GPIO_PODR_BS_MASK +#define GPIO_PDDR_CS(x) GPIO_PODR_CS(x) +#define GPIO_PDDR_CS_MASK GPIO_PODR_CS_MASK +#define GPIO_PDDR_SDRAM(X) GPIO_PODR_SDRAM(X) +#define GPIO_PDDR_SDRAM_MASK GPIO_PODR_SDRAM_MASK +#define GPIO_PDDR_FECI2C(x) GPIO_PDDR_BS(x) +#define GPIO_PDDR_FECI2C_MASK GPIO_PDDR_BS_MASK +#define GPIO_PDDR_UARTH(x) GPIO_PODR_UARTH(x) +#define GPIO_PDDR_UARTH_MASK GPIO_PODR_UARTH_MASK +#define GPIO_PDDR_QSPI(x) GPIO_PODR_QSPI(x) +#define GPIO_PDDR_QSPI_MASK GPIO_PODR_QSPI_MASK +#define GPIO_PDDR_ETPU(x) GPIO_PODR_ETPU(x) +#define GPIO_PDDR_ETPU_MASK GPIO_PODR_ETPU_MASK + +/* Bit definitions and macros for GPIO_PPDSDR */ +#define GPIO_PPDSDR_ADDR(x) GPIO_PODR_ADDR(x) +#define GPIO_PPDSDR_ADDR_MASK GPIO_PODR_ADDR_MASK +#define GPIO_PPDSDR_BS(x) GPIO_PODR_BS(x) +#define GPIO_PPDSDR_BS_MASK GPIO_PODR_BS_MASK +#define GPIO_PPDSDR_CS(x) GPIO_PODR_CS(x) +#define GPIO_PPDSDR_CS_MASK GPIO_PODR_CS_MASK +#define GPIO_PPDSDR_SDRAM(X) GPIO_PODR_SDRAM(X) +#define GPIO_PPDSDR_SDRAM_MASK GPIO_PODR_SDRAM_MASK +#define GPIO_PPDSDR_FECI2C(x) GPIO_PPDSDR_BS(x) +#define GPIO_PPDSDR_FECI2C_MASK GPIO_PPDSDR_BS_MASK +#define GPIO_PPDSDR_UARTH(x) GPIO_PODR_UARTH(x) +#define GPIO_PPDSDR_UARTH_MASK GPIO_PODR_UARTH_MASK +#define GPIO_PPDSDR_QSPI(x) GPIO_PODR_QSPI(x) +#define GPIO_PPDSDR_QSPI_MASK GPIO_PODR_QSPI_MASK +#define GPIO_PPDSDR_ETPU(x) GPIO_PODR_ETPU(x) +#define GPIO_PPDSDR_ETPU_MASK GPIO_PODR_ETPU_MASK + +/* Bit definitions and macros for GPIO_PCLRR */ +#define GPIO_PCLRR_ADDR(x) GPIO_PODR_ADDR(x) +#define GPIO_PCLRR_ADDR_MASK GPIO_PODR_ADDR_MASK +#define GPIO_PCLRR_BS(x) GPIO_PODR_BS(x) +#define GPIO_PCLRR_BS_MASK GPIO_PODR_BS_MASK +#define GPIO_PCLRR_CS(x) GPIO_PODR_CS(x) +#define GPIO_PCLRR_CS_MASK GPIO_PODR_CS_MASK +#define GPIO_PCLRR_SDRAM(X) GPIO_PODR_SDRAM(X) +#define GPIO_PCLRR_SDRAM_MASK GPIO_PODR_SDRAM_MASK +#define GPIO_PCLRR_FECI2C(x) GPIO_PCLRR_BS(x) +#define GPIO_PCLRR_FECI2C_MASK GPIO_PCLRR_BS_MASK +#define GPIO_PCLRR_UARTH(x) GPIO_PODR_UARTH(x) +#define GPIO_PCLRR_UARTH_MASK GPIO_PODR_UARTH_MASK +#define GPIO_PCLRR_QSPI(x) GPIO_PODR_QSPI(x) +#define GPIO_PCLRR_QSPI_MASK GPIO_PODR_QSPI_MASK +#define GPIO_PCLRR_ETPU(x) GPIO_PODR_ETPU(x) +#define GPIO_PCLRR_ETPU_MASK GPIO_PODR_ETPU_MASK + +/* Bit definitions and macros for GPIO_PAR */ +#define GPIO_PAR_AD_ADDR23 (0x80) +#define GPIO_PAR_AD_ADDR22 (0x40) +#define GPIO_PAR_AD_ADDR21 (0x20) +#define GPIO_PAR_AD_DATAL (0x01) +#define GPIO_PAR_BUSCTL_OE (0x4000) +#define GPIO_PAR_BUSCTL_TA (0x1000) +#define GPIO_PAR_BUSCTL_TEA(x) (((x)&0x03)<<10) +#define GPIO_PAR_BUSCTL_TEA_MASK (0x0C00) +#define GPIO_PAR_BUSCTL_TEA_GPIO (0x0400) +#define GPIO_PAR_BUSCTL_TEA_DREQ1 (0x0800) +#define GPIO_PAR_BUSCTL_TEA_EXTBUS (0x0C00) +#define GPIO_PAR_BUSCTL_RWB (0x0100) +#define GPIO_PAR_BUSCTL_TSIZ1 (0x0040) +#define GPIO_PAR_BUSCTL_TSIZ0 (0x0010) +#define GPIO_PAR_BUSCTL_TS(x) (((x)&0x03)<<2) +#define GPIO_PAR_BUSCTL_TS_MASK (0x0C) +#define GPIO_PAR_BUSCTL_TS_GPIO (0x04) +#define GPIO_PAR_BUSCTL_TS_DACK2 (0x08) +#define GPIO_PAR_BUSCTL_TS_EXTBUS (0x0C) +#define GPIO_PAR_BUSCTL_TIP(x) ((x)&0x03) +#define GPIO_PAR_BUSCTL_TIP_MASK (0x03) +#define GPIO_PAR_BUSCTL_TIP_GPIO (0x01) +#define GPIO_PAR_BUSCTL_TIP_DREQ0 (0x02) +#define GPIO_PAR_BUSCTL_TIP_EXTBUS (0x03) +#define GPIO_PAR_BS(x) ((x)&0x0F) +#define GPIO_PAR_BS_MASK (0x0F) +#define GPIO_PAR_CS(x) (((x)&0x7F)<<1) +#define GPIO_PAR_CS_MASK (0xFE) +#define GPIO_PAR_CS_CS7 (0x80) +#define GPIO_PAR_CS_CS6 (0x40) +#define GPIO_PAR_CS_CS5 (0x20) +#define GPIO_PAR_CS_CS4 (0x10) +#define GPIO_PAR_CS_CS3 (0x08) +#define GPIO_PAR_CS_CS2 (0x04) +#define GPIO_PAR_CS_CS1 (0x02) +#define GPIO_PAR_CS_SD3 GPIO_PAR_CS_CS3 +#define GPIO_PAR_CS_SD2 GPIO_PAR_CS_CS2 +#define GPIO_PAR_SDRAM_CSSDCS(x) (((x)&0x03)<<6) +#define GPIO_PAR_SDRAM_CSSDCS_MASK (0xC0) +#define GPIO_PAR_SDRAM_SDWE (0x20) +#define GPIO_PAR_SDRAM_SCAS (0x10) +#define GPIO_PAR_SDRAM_SRAS (0x08) +#define GPIO_PAR_SDRAM_SCKE (0x04) +#define GPIO_PAR_SDRAM_SDCS(x) ((x)&0x03) +#define GPIO_PAR_SDRAM_SDCS_MASK (0x03) +#define GPIO_PAR_FECI2C_EMDC(x) (((x)&0x03)<<6) +#define GPIO_PAR_FECI2C_EMDC_MASK (0xC0) +#define GPIO_PAR_FECI2C_EMDC_U2TXD (0x40) +#define GPIO_PAR_FECI2C_EMDC_I2CSCL (0x80) +#define GPIO_PAR_FECI2C_EMDC_FECEMDC (0xC0) +#define GPIO_PAR_FECI2C_EMDIO(x) (((x)&0x03)<<4) +#define GPIO_PAR_FECI2C_EMDIO_MASK (0x30) +#define GPIO_PAR_FECI2C_EMDIO_U2RXD (0x10) +#define GPIO_PAR_FECI2C_EMDIO_I2CSDA (0x20) +#define GPIO_PAR_FECI2C_EMDIO_FECEMDIO (0x30) +#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x03)<<2) +#define GPIO_PAR_FECI2C_SCL_MASK (0x0C) +#define GPIO_PAR_FECI2C_SCL_CAN0RX (0x08) +#define GPIO_PAR_FECI2C_SCL_I2CSCL (0x0C) +#define GPIO_PAR_FECI2C_SDA(x) ((x)&0x03) +#define GPIO_PAR_FECI2C_SDA_MASK (0x03) +#define GPIO_PAR_FECI2C_SDA_CAN0TX (0x02) +#define GPIO_PAR_FECI2C_SDA_I2CSDA (0x03) +#define GPIO_PAR_UART_DREQ2 (0x8000) +#define GPIO_PAR_UART_CAN1EN (0x4000) +#define GPIO_PAR_UART_U2RXD (0x2000) +#define GPIO_PAR_UART_U2TXD (0x1000) +#define GPIO_PAR_UART_U1RXD(x) (((x)&0x03)<<10) +#define GPIO_PAR_UART_U1RXD_MASK (0x0C00) +#define GPIO_PAR_UART_U1RXD_CAN0RX (0x0800) +#define GPIO_PAR_UART_U1RXD_U1RXD (0x0C00) +#define GPIO_PAR_UART_U1TXD(x) (((x)&0x03)<<8) +#define GPIO_PAR_UART_U1TXD_MASK (0x0300) +#define GPIO_PAR_UART_U1TXD_CAN0TX (0x0200) +#define GPIO_PAR_UART_U1TXD_U1TXD (0x0300) +#define GPIO_PAR_UART_U1CTS(x) (((x)&0x03)<<6) +#define GPIO_PAR_UART_U1CTS_MASK (0x00C0) +#define GPIO_PAR_UART_U1CTS_U2CTS (0x0080) +#define GPIO_PAR_UART_U1CTS_U1CTS (0x00C0) +#define GPIO_PAR_UART_U1RTS(x) (((x)&0x03)<<4) +#define GPIO_PAR_UART_U1RTS_MASK (0x0030) +#define GPIO_PAR_UART_U1RTS_U2RTS (0x0020) +#define GPIO_PAR_UART_U1RTS_U1RTS (0x0030) +#define GPIO_PAR_UART_U0RXD (0x0008) +#define GPIO_PAR_UART_U0TXD (0x0004) +#define GPIO_PAR_UART_U0CTS (0x0002) +#define GPIO_PAR_UART_U0RTS (0x0001) +#define GPIO_PAR_QSPI_CS1(x) (((x)&0x03)<<6) +#define GPIO_PAR_QSPI_CS1_MASK (0xC0) +#define GPIO_PAR_QSPI_CS1_SDRAMSCKE (0x80) +#define GPIO_PAR_QSPI_CS1_QSPICS1 (0xC0) +#define GPIO_PAR_QSPI_CS0 (0x20) +#define GPIO_PAR_QSPI_DIN(x) (((x)&0x03)<<3) +#define GPIO_PAR_QSPI_DIN_MASK (0x18) +#define GPIO_PAR_QSPI_DIN_I2CSDA (0x10) +#define GPIO_PAR_QSPI_DIN_QSPIDIN (0x18) +#define GPIO_PAR_QSPI_DOUT (0x04) +#define GPIO_PAR_QSPI_SCK(x) ((x)&0x03) +#define GPIO_PAR_QSPI_SCK_MASK (0x03) +#define GPIO_PAR_QSPI_SCK_I2CSCL (0x02) +#define GPIO_PAR_QSPI_SCK_QSPISCK (0x03) +#define GPIO_PAR_DT3IN(x) (((x)&0x03)<<14) +#define GPIO_PAR_DT3IN_MASK (0xC000) +#define GPIO_PAR_DT3IN_QSPICS2 (0x4000) +#define GPIO_PAR_DT3IN_U2CTS (0x8000) +#define GPIO_PAR_DT3IN_DT3IN (0xC000) +#define GPIO_PAR_DT2IN(x) (((x)&0x03)<<12) +#define GPIO_PAR_DT2IN_MASK (0x3000) +#define GPIO_PAR_DT2IN_DT2OUT (0x1000) +#define GPIO_PAR_DT2IN_DREQ2 (0x2000) +#define GPIO_PAR_DT2IN_DT2IN (0x3000) +#define GPIO_PAR_DT1IN(x) (((x)&0x03)<<10) +#define GPIO_PAR_DT1IN_MASK (0x0C00) +#define GPIO_PAR_DT1IN_DT1OUT (0x0400) +#define GPIO_PAR_DT1IN_DREQ1 (0x0800) +#define GPIO_PAR_DT1IN_DT1IN (0x0C00) +#define GPIO_PAR_DT0IN(x) (((x)&0x03)<<8) +#define GPIO_PAR_DT0IN_MASK (0x0300) +#define GPIO_PAR_DT0IN_DREQ0 (0x0200) +#define GPIO_PAR_DT0IN_DT0IN (0x0300) +#define GPIO_PAR_DT3OUT(x) (((x)&0x03)<<6) +#define GPIO_PAR_DT3OUT_MASK (0x00C0) +#define GPIO_PAR_DT3OUT_QSPICS3 (0x0040) +#define GPIO_PAR_DT3OUT_U2RTS (0x0080) +#define GPIO_PAR_DT3OUT_DT3OUT (0x00C0) +#define GPIO_PAR_DT2OUT(x) (((x)&0x03)<<4) +#define GPIO_PAR_DT2OUT_MASK (0x0030) +#define GPIO_PAR_DT2OUT_DACK2 (0x0020) +#define GPIO_PAR_DT2OUT_DT2OUT (0x0030) +#define GPIO_PAR_DT1OUT(x) (((x)&0x03)<<2) +#define GPIO_PAR_DT1OUT_MASK (0x000C) +#define GPIO_PAR_DT1OUT_DACK1 (0x0008) +#define GPIO_PAR_DT1OUT_DT1OUT (0x000C) +#define GPIO_PAR_DT0OUT(x) ((x)&0x03) +#define GPIO_PAR_DT0OUT_MASK (0x0003) +#define GPIO_PAR_DT0OUT_DACK0 (0x0002) +#define GPIO_PAR_DT0OUT_DT0OUT (0x0003) +#define GPIO_PAR_ETPU_TCRCLK (0x04) +#define GPIO_PAR_ETPU_UTPU_ODIS (0x02) +#define GPIO_PAR_ETPU_LTPU_ODIS (0x01) + +/* Bit definitions and macros for GPIO_DSCR */ +#define GPIO_DSCR_EIM_EIM1 (0x10) +#define GPIO_DSCR_EIM_EIM0 (0x01) +#define GPIO_DSCR_ETPU_ETPU31_24 (0x40) +#define GPIO_DSCR_ETPU_ETPU23_16 (0x10) +#define GPIO_DSCR_ETPU_ETPU15_8 (0x04) +#define GPIO_DSCR_ETPU_ETPU7_0 (0x01) +#define GPIO_DSCR_FECI2C_FEC (0x10) +#define GPIO_DSCR_FECI2C_I2C (0x01) +#define GPIO_DSCR_UART_IRQ (0x40) +#define GPIO_DSCR_UART_UART2 (0x10) +#define GPIO_DSCR_UART_UART1 (0x04) +#define GPIO_DSCR_UART_UART0 (0x01) +#define GPIO_DSCR_QSPI_QSPI (0x01) +#define GPIO_DSCR_TIMER (0x01) + +/********************************************************************* +* Chip Configuration Module (CCM) +*********************************************************************/ +/* Bit definitions and macros for CCM_RCR */ +#define CCM_RCR_SOFTRST (0x80) +#define CCM_RCR_FRCRSTOUT (0x40) + +/* Bit definitions and macros for CCM_RSR */ +#define CCM_RSR_SOFT (0x20) +#define CCM_RSR_WDR (0x10) +#define CCM_RSR_POR (0x08) +#define CCM_RSR_EXT (0x04) +#define CCM_RSR_LOC (0x02) +#define CCM_RSR_LOL (0x01) + +/* Bit definitions and macros for CCM_CCR */ +#define CCM_CCR_LOAD (0x8000) +#define CCM_CCR_SZEN (0x0040) +#define CCM_CCR_PSTEN (0x0020) +#define CCM_CCR_BME (0x0008) +#define CCM_CCR_BMT(x) ((x)&0x07) +#define CCM_CCR_BMT_MASK (0x0007) +#define CCM_CCR_BMT_64K (0x0000) +#define CCM_CCR_BMT_32K (0x0001) +#define CCM_CCR_BMT_16K (0x0002) +#define CCM_CCR_BMT_8K (0x0003) +#define CCM_CCR_BMT_4K (0x0004) +#define CCM_CCR_BMT_2K (0x0005) +#define CCM_CCR_BMT_1K (0x0006) +#define CCM_CCR_BMT_512 (0x0007) + +/* Bit definitions and macros for CCM_RCON */ +#define CCM_RCON_RCSC(x) (((x)&0x0003)<<8) +#define CCM_RCON_RLOAD (0x0020) +#define CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3) +#define CCM_RCON_BOOTPS_MASK (0x0018) +#define CCM_RCON_BOOTPS_32 (0x0018) +#define CCM_RCON_BOOTPS_16 (0x0008) +#define CCM_RCON_BOOTPS_8 (0x0010) +#define CCM_RCON_MODE (0x0001) + +/* Bit definitions and macros for CCM_CIR */ +#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) +#define CCM_CIR_PRN(x) ((x)&0x003F) + +/********************************************************************* +* PLL Clock Module +*********************************************************************/ +/* Bit definitions and macros for PLL_SYNCR */ +#define PLL_SYNCR_MFD(x) (((x)&0x07)<<24) +#define PLL_SYNCR_MFD_MASK (0x07000000) +#define PLL_SYNCR_RFC(x) (((x)&0x07)<<19) +#define PLL_SYNCR_RFC_MASK (0x00380000) +#define PLL_SYNCR_LOCEN (0x00040000) +#define PLL_SYNCR_LOLRE (0x00020000) +#define PLL_SYNCR_LOCRE (0x00010000) +#define PLL_SYNCR_DISCLK (0x00008000) +#define PLL_SYNCR_LOLIRQ (0x00004000) +#define PLL_SYNCR_LOCIRQ (0x00002000) +#define PLL_SYNCR_RATE (0x00001000) +#define PLL_SYNCR_DEPTH(x) (((x)&0x03)<<10) +#define PLL_SYNCR_EXP(x) ((x)&0x03FF) + +/* Bit definitions and macros for PLL_SYNSR */ +#define PLL_SYNSR_LOLF (0x00000200) +#define PLL_SYNSR_LOC (0x00000100) +#define PLL_SYNSR_MODE (0x00000080) +#define PLL_SYNSR_PLLSEL (0x00000040) +#define PLL_SYNSR_PLLREF (0x00000020) +#define PLL_SYNSR_LOCKS (0x00000010) +#define PLL_SYNSR_LOCK (0x00000008) +#define PLL_SYNSR_LOCF (0x00000004) +#define PLL_SYNSR_CALDONE (0x00000002) +#define PLL_SYNSR_CALPASS (0x00000001) + +/********************************************************************* + * Edge Port +*********************************************************************/ +#define EPORT_EPPAR_EPPA7(x) (((x)&0x03)<<14) +#define EPORT_EPPAR_EPPA6(x) (((x)&0x03)<<12) +#define EPORT_EPPAR_EPPA5(x) (((x)&0x03)<<10) +#define EPORT_EPPAR_EPPA4(x) (((x)&0x03)<<8) +#define EPORT_EPPAR_EPPA3(x) (((x)&0x03)<<6) +#define EPORT_EPPAR_EPPA2(x) (((x)&0x03)<<4) +#define EPORT_EPPAR_EPPA1(x) (((x)&0x03)<<2) + +#define EPORT_EPDDR_EPDD7(x) EPORT_EPPAR_EPPA7(x) +#define EPORT_EPDDR_EPDD6(x) EPORT_EPPAR_EPPA6(x) +#define EPORT_EPDDR_EPDD5(x) EPORT_EPPAR_EPPA5(x) +#define EPORT_EPDDR_EPDD4(x) EPORT_EPPAR_EPPA4(x) +#define EPORT_EPDDR_EPDD3(x) EPORT_EPPAR_EPPA3(x) +#define EPORT_EPDDR_EPDD2(x) EPORT_EPPAR_EPPA2(x) +#define EPORT_EPDDR_EPDD1(x) EPORT_EPPAR_EPPA1(x) + +#define EPORT_EPIER_EPIE7 (0x80) +#define EPORT_EPIER_EPIE6 (0x40) +#define EPORT_EPIER_EPIE5 (0x20) +#define EPORT_EPIER_EPIE4 (0x10) +#define EPORT_EPIER_EPIE3 (0x08) +#define EPORT_EPIER_EPIE2 (0x04) +#define EPORT_EPIER_EPIE1 (0x02) + +#define EPORT_EPDR_EPDR7 EPORT_EPIER_EPIE7 +#define EPORT_EPDR_EPDR6 EPORT_EPIER_EPIE6 +#define EPORT_EPDR_EPDR5 EPORT_EPIER_EPIE5 +#define EPORT_EPDR_EPDR4 EPORT_EPIER_EPIE4 +#define EPORT_EPDR_EPDR3 EPORT_EPIER_EPIE3 +#define EPORT_EPDR_EPDR2 EPORT_EPIER_EPIE2 +#define EPORT_EPDR_EPDR1 EPORT_EPIER_EPIE1 + +#define EPORT_EPPDR_EPPDR7 EPORT_EPIER_EPIE7 +#define EPORT_EPPDR_EPPDR6 EPORT_EPIER_EPIE6 +#define EPORT_EPPDR_EPPDR5 EPORT_EPIER_EPIE5 +#define EPORT_EPPDR_EPPDR4 EPORT_EPIER_EPIE4 +#define EPORT_EPPDR_EPPDR3 EPORT_EPIER_EPIE3 +#define EPORT_EPPDR_EPPDR2 EPORT_EPIER_EPIE2 +#define EPORT_EPPDR_EPPDR1 EPORT_EPIER_EPIE1 + +/********************************************************************* +* Watchdog Timer Modules (WTM) +*********************************************************************/ +/* Bit definitions and macros for WTM_WCR */ +#define WTM_WCR_WAIT (0x0008) +#define WTM_WCR_DOZE (0x0004) +#define WTM_WCR_HALTED (0x0002) +#define WTM_WCR_EN (0x0001) + +/********************************************************************* +* FlexCAN Module (CAN) +*********************************************************************/ +/* Bit definitions and macros for CAN_CANMCR */ +#define CANMCR_MDIS (0x80000000) +#define CANMCR_FRZ (0x40000000) +#define CANMCR_HALT (0x10000000) +#define CANMCR_NORDY (0x08000000) +#define CANMCR_SOFTRST (0x02000000) +#define CANMCR_FRZACK (0x01000000) +#define CANMCR_SUPV (0x00800000) +#define CANMCR_LPMACK (0x00100000) +#define CANMCR_MAXMB(x) (((x)&0x0F)) + +/* Bit definitions and macros for CAN_CANCTRL */ +#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) +#define CANCTRL_RJW(x) (((x)&0x03)<<22) +#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) +#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) +#define CANCTRL_BOFFMSK (0x00008000) +#define CANCTRL_ERRMSK (0x00004000) +#define CANCTRL_CLKSRC (0x00002000) +#define CANCTRL_LPB (0x00001000) +#define CANCTRL_SMP (0x00000080) +#define CANCTRL_BOFFREC (0x00000040) +#define CANCTRL_TSYNC (0x00000020) +#define CANCTRL_LBUF (0x00000010) +#define CANCTRL_LOM (0x00000008) +#define CANCTRL_PROPSEG(x) (((x)&0x07)) + +/* Bit definitions and macros for CAN_TIMER */ +#define TIMER_TIMER(x) ((x)&0xFFFF) + +/* Bit definitions and macros for CAN_RXGMASK */ +#define RXGMASK_MI(x) ((x)&0x1FFFFFFF) + +/* Bit definitions and macros for CAN_ERRCNT */ +#define ERRCNT_TXECTR(x) (((x)&0xFF)) +#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) + +/* Bit definitions and macros for CAN_ERRSTAT */ +#define ERRSTAT_BITERR1 (0x00008000) +#define ERRSTAT_BITERR0 (0x00004000) +#define ERRSTAT_ACKERR (0x00002000) +#define ERRSTAT_CRCERR (0x00001000) +#define ERRSTAT_FRMERR (0x00000800) +#define ERRSTAT_STFERR (0x00000400) +#define ERRSTAT_TXWRN (0x00000200) +#define ERRSTAT_RXWRN (0x00000100) +#define ERRSTAT_IDLE (0x00000080) +#define ERRSTAT_TXRX (0x00000040) +#define ERRSTAT_FLT_BUSOFF (0x00000020) +#define ERRSTAT_FLT_PASSIVE (0x00000010) +#define ERRSTAT_FLT_ACTIVE (0x00000000) +#define ERRSTAT_BOFFINT (0x00000004) +#define ERRSTAT_ERRINT (0x00000002) + +/* Bit definitions and macros for CAN_IMASK */ +#define IMASK_BUF15M (0x00008000) +#define IMASK_BUF14M (0x00004000) +#define IMASK_BUF13M (0x00002000) +#define IMASK_BUF12M (0x00001000) +#define IMASK_BUF11M (0x00000800) +#define IMASK_BUF10M (0x00000400) +#define IMASK_BUF9M (0x00000200) +#define IMASK_BUF8M (0x00000100) +#define IMASK_BUF7M (0x00000080) +#define IMASK_BUF6M (0x00000040) +#define IMASK_BUF5M (0x00000020) +#define IMASK_BUF4M (0x00000010) +#define IMASK_BUF3M (0x00000008) +#define IMASK_BUF2M (0x00000004) +#define IMASK_BUF1M (0x00000002) +#define IMASK_BUF0M (0x00000001) + +/* Bit definitions and macros for CAN_IFLAG */ +#define IFLAG_BUF15I (0x00008000) +#define IFLAG_BUF14I (0x00004000) +#define IFLAG_BUF13I (0x00002000) +#define IFLAG_BUF12I (0x00001000) +#define IFLAG_BUF11I (0x00000800) +#define IFLAG_BUF10I (0x00000400) +#define IFLAG_BUF9I (0x00000200) +#define IFLAG_BUF8I (0x00000100) +#define IFLAG_BUF7I (0x00000080) +#define IFLAG_BUF6I (0x00000040) +#define IFLAG_BUF5I (0x00000020) +#define IFLAG_BUF4I (0x00000010) +#define IFLAG_BUF3I (0x00000008) +#define IFLAG_BUF2I (0x00000004) +#define IFLAG_BUF1I (0x00000002) +#define IFLAG_BUF0I (0x00000001) + +#endif /* mcf5235_h */ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h new file mode 100644 index 0000000..7f544c8 --- /dev/null +++ b/include/configs/M5235EVB.h @@ -0,0 +1,261 @@ +/* + * Configuation settings for the Freescale MCF5329 FireEngine board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5235EVB_H +#define _M5235EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF523x /* define processor family */ +#define CONFIG_M5235 /* define processor type */ + +#undef DEBUG + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration */ +#include + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x00000300 +#define CFG_IMMR CFG_MBAR + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_BOOTFILE "u-boot.bin" +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5235EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" + +#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_KGDB) +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE+0x20000) + +#define CFG_HZ 1000 +#define CFG_CLK 75000000 +#define CFG_CPU_CLK CFG_CLK * 2 + +#define CFG_MBAR 0x40000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x21 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE - 0x10) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +/* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ +#ifdef NORFLASH_PS32BIT +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT +#else +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#endif +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#endif + +#define CFG_FLASH_BASE (CFG_CS0_BASE << 16) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 +#ifdef NORFLASH_PS32BIT +# define CFG_ENV_OFFSET (0x8000) +# define CFG_ENV_SIZE 0x4000 +# define CFG_ENV_SECT_SIZE 0x4000 +#else +# define CFG_ENV_OFFSET (0x4000) +# define CFG_ENV_SIZE 0x2000 +# define CFG_ENV_SECT_SIZE 0x2000 +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Chipselect bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - Available + * CS2 - Available + * CS3 - Available + * CS4 - Available + * CS5 - Available + * CS6 - Available + * CS7 - Available + */ +#ifdef NORFLASH_PS32BIT +# define CFG_CS0_BASE 0xFFC0 +# define CFG_CS0_MASK 0x003f0001 +# define CFG_CS0_CTRL 0x1D00 +#else +# define CFG_CS0_BASE 0xFFE0 +# define CFG_CS0_MASK 0x001f0001 +# define CFG_CS0_CTRL 0x1D80 +#endif + +#endif /* _M5329EVB_H */ -- cgit v1.1 From 8280f6a1c43247616b68224675188e5ccd124650 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Sat, 18 Aug 2007 14:33:02 +0200 Subject: Coding style cleanup Signed-off-by: Stefan Roese --- CREDITS | 56 +++++++++++++++++------------------ board/freescale/m5249evb/m5249evb.c | 1 - board/freescale/m5253evbe/m5253evbe.c | 1 - board/freescale/m54455evb/m54455evb.c | 1 - cpu/mcf523x/cpu_init.c | 30 +++++++++---------- cpu/mcf523x/speed.c | 3 +- cpu/mcf52x2/cpu_init.c | 2 +- doc/README.m5253evbe | 6 ++-- include/configs/M5249EVB.h | 1 - include/configs/M5253EVBE.h | 1 - lib_m68k/m68k_linux.c | 6 ++-- 11 files changed, 53 insertions(+), 55 deletions(-) diff --git a/CREDITS b/CREDITS index 6e44db4..0953e7b 100644 --- a/CREDITS +++ b/CREDITS @@ -147,6 +147,11 @@ N: Daniel Engstr E: daniel@omicron.se D: x86 port, Support for sc520_cdp board +N: Hayden Fraser +E: Hayden.Fraser@freescale.com +D: Support for ColdFire MCF5253 +W: www.freescale.com + N: Dr. Wolfgang Grandegger E: wg@denx.de D: Support for Interphase 4539 T1/E1/J1 PMC, PN62, CCM, SCM boards @@ -283,6 +288,11 @@ E: team@leox.org D: Support for LEOX boards, DS164x RTC W: http://www.leox.org +N: TsiChung Liew +E: Tsi-Chung.Liew@freescale.com +D: Support for ColdFire MCF523x, MCF532x, MCF5445x +W: www.freescale.com + N: Leif Lindholm E: leif.lindholm@i3micro.com D: Support for AMD dbau1550 board. @@ -297,6 +307,11 @@ N: Raymond Lo E: lo@routefree.com D: Support for DOS partitions +N: James MacAulay +E: james.macaulay@amirix.com +D: Suppport for Amirix AP1000 +W: www.amirix.com + N: Dan Malek E: dan@embeddedalley.com D: FADSROM, the grandfather of all of this @@ -372,8 +387,9 @@ D: Support for the Wind River sbc405, sbc8240 board W: http://www.windriver.com N: Stefan Roese -E: stefan.roese@esd-electronics.com -D: AMCC PPC401/403/405GP Support; Windows environment support +E: sr@denx.de +D: AMCC PPC4xx Support +W: http://www.denx.de N: Erwin Rol E: erwin@muffin.org @@ -407,6 +423,11 @@ N: Art Shipkowski E: art@videon-central.com D: Support for NetSilicon NS7520 +N: Michal Simek +E: monstr@monstr.eu +D: Support for Microblaze, ML401, XUPV2P board +W: www.monstr.eu + N: Yasushi Shoji E: yashi@atmark-techno.com D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board @@ -420,6 +441,11 @@ E: andrea.scian@dave-tech.it D: Port to B2 board W: www.dave-tech.it +N: Timur Tabi +E: timur@freescale.com +D: Support for MPC8349E-mITX +W: www.freescale.com + N: Rob Taylor E: robt@flyingpig.com D: Port to MBX860T and Sandpoint8240 @@ -473,29 +499,3 @@ N: Alex Zuepke E: azu@sysgo.de D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM W: www.elinos.com - -N: James MacAulay -E: james.macaulay@amirix.com -D: Suppport for Amirix AP1000 -W: www.amirix.com - -N: Timur Tabi -E: timur@freescale.com -D: Support for MPC8349E-mITX -W: www.freescale.com - -N: Michal Simek -E: monstr@monstr.eu -D: Support for Microblaze, ML401, XUPV2P board -W: www.monstr.eu - -N: TsiChung Liew -E: Tsi-Chung.Liew@freescale.com -D: Support for ColdFire MCF523x, MCF532x, MCF5445x -W: www.freescale.com - -N: Hayden Fraser -E: Hayden.Fraser@freescale.com -D: Support for ColdFire MCF5253 -W: www.freescale.com - diff --git a/board/freescale/m5249evb/m5249evb.c b/board/freescale/m5249evb/m5249evb.c index b0bf413..e8f621b 100644 --- a/board/freescale/m5249evb/m5249evb.c +++ b/board/freescale/m5249evb/m5249evb.c @@ -111,4 +111,3 @@ int testdram (void) { return (0); } - diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c index 67fab5b..43aa84d 100644 --- a/board/freescale/m5253evbe/m5253evbe.c +++ b/board/freescale/m5253evbe/m5253evbe.c @@ -130,4 +130,3 @@ void ide_set_reset(int idereset) } } #endif /* CONFIG_CMD_IDE */ - diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index 1411a1a..6a02782 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -162,4 +162,3 @@ void pci_init_board(void) pci_mcf5445x_init(&hose); } #endif /* CONFIG_PCI */ - diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c index a31054d..55c9cd3 100644 --- a/cpu/mcf523x/cpu_init.c +++ b/cpu/mcf523x/cpu_init.c @@ -127,19 +127,19 @@ int cpu_init_r(void) void uart_port_conf(void) { - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - /* Setup Ports: */ - switch (CFG_UART_PORT) { - case 0: - gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); - break; - case 1: - gpio->par_uart = - (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); - break; - case 2: - gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); - break; - } + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); + break; + case 2: + gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); + break; + } } diff --git a/cpu/mcf523x/speed.c b/cpu/mcf523x/speed.c index 509109d..247d318 100644 --- a/cpu/mcf523x/speed.c +++ b/cpu/mcf523x/speed.c @@ -41,8 +41,9 @@ int get_clocks(void) pll->syncr = PLL_SYNCR_MFD(1); while (!(pll->synsr & PLL_SYNSR_LOCK)); - + gd->bus_clk = CFG_CLK; gd->cpu_clk = (gd->bus_clk * 2); + return (0); } diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index f41d77b..458b85e 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -63,7 +63,7 @@ void cpu_init_f(void) mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */ mbar2_writeByte(MCFSIM_SPURVEC, 0x00); - /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); *//* Enable a 1 cycle pre-drive cycle on CS1 */ + /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); */ /* Enable a 1 cycle pre-drive cycle on CS1 */ /* * Setup chip selects... diff --git a/doc/README.m5253evbe b/doc/README.m5253evbe index 7f2afcf..0426cb1 100644 --- a/doc/README.m5253evbe +++ b/doc/README.m5253evbe @@ -18,14 +18,14 @@ Created 06/05/2007 SDR: 0x00000000-0x00ffffff SRAM0: 0x20010000-0x20017fff SRAM1: 0x20000000-0x2000ffff - MBAR1: 0x10000000-0x4fffffff + MBAR1: 0x10000000-0x4fffffff MBAR2: 0x80000000-0xCfffffff - Flash: 0xffe00000-0xffffffff + Flash: 0xffe00000-0xffffffff 3. DEFINITIONS AND COMPILATION ============================== 3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h - CONFIG_MCF52x2 Processor family + CONFIG_MCF52x2 Processor family CONFIG_MCF5253 MCF5253 specific CONFIG_M5253EVBE Amadeus Plus board specific CFG_CLK Define Amadeus Plus CPU Clock diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index b300b68..de7ea42 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -192,4 +192,3 @@ #define CFG_GPIO1_LED 0x00400000 /* user led */ #endif /* M5249 */ - diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 9ad74e2..48170e7 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -210,4 +210,3 @@ #define CFG_GPIO1_LED 0x00400000 /* user led */ #endif /* _M5253EVB_H */ - diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c index fde1744..bea9744 100644 --- a/lib_m68k/m68k_linux.c +++ b/lib_m68k/m68k_linux.c @@ -92,7 +92,8 @@ void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, */ asm("movel %%a7, %%d0\n" "movel %%d0, %0\n": "=d"(sp): :"%d0"); - debug("## Current stack ends at 0x%08lX ", sp); + + debug("## Current stack ends at 0x%08lX ", sp); sp -= 2048; /* just to be sure */ if (sp > CFG_BOOTMAPSZ) @@ -269,7 +270,8 @@ void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, */ asm("movel %%a7, %%d0\n" "movel %%d0, %0\n": "=d"(nsp): :"%d0"); - nsp -= 2048; /* just to be sure */ + + nsp -= 2048; /* just to be sure */ nsp &= ~0xF; if (nsp > initrd_high) /* limit as specified */ -- cgit v1.1 From 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Sat, 18 Aug 2007 14:37:52 +0200 Subject: ColdFire: Fix some remaining problems with CFG_CMD_ Signed-off-by: Stefan Roese --- common/cmd_bdinfo.c | 4 ++-- doc/README.m54455evb | 2 +- include/configs/idmr.h | 6 +++--- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 7686080..ef15a00 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -237,7 +237,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) print_str ("inpfreq", strmhz(buf, bd->bi_inpfreq)); print_str ("vcofreq", strmhz(buf, bd->bi_vcofreq)); #endif -#if defined(CFG_CMD_NET) +#if defined(CONFIG_CMD_NET) puts ("ethaddr ="); for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); @@ -266,7 +266,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) puts ("\nip_addr = "); print_IPaddr (bd->bi_ip_addr); -#endif /* CONFIG_CMD_NET */ +#endif printf ("\nbaudrate = %d bps\n", bd->bi_baudrate); return 0; diff --git a/doc/README.m54455evb b/doc/README.m54455evb index c768fc8..119a19d 100644 --- a/doc/README.m54455evb +++ b/doc/README.m54455evb @@ -78,7 +78,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CFG_MCFRTC_BASE -- provide base address for RTC in immap.h CFG_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CFG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in u-boot CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_NET_MULTI -- define to use multi FEC in u-boot diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 3ec4a79..404e88a 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -235,8 +235,8 @@ "2m(rootfs)," \ "-(user)"; -#if (CONFIG_COMMANDS & CFG_CMD_MII) -#error MII commands don't work on iDMR board and sholud not be enabled. -#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */ +#if defined(CONFIG_CMD_MII) +#error "MII commands don't work on iDMR board and should not be enabled." +#endif #endif /* _IDMR_H */ -- cgit v1.1 From 815b5bd5b18569917c3e04b9757511e6ed23b9f6 Mon Sep 17 00:00:00 2001 From: Shinya Kuribayashi Date: Fri, 17 Aug 2007 12:43:44 +0900 Subject: PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug This patch has been sent on: - 6 Jun 2007 Many users of PCI config read routines tend to ignore the function ret value, and are only concerned about the contents of *val. Based on this, pci_hose_read_config_{byte,word}_via_dword should initialize the *val on dword read error. Without this fix, for example, we'll go on scanning bus with vendor or header_type uninitialized. This brings many unnecessary config trials. Signed-off-by: Shinya Kuribayashi --- drivers/pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pci.c b/drivers/pci.c index 4158919..50ca6b0 100644 --- a/drivers/pci.c +++ b/drivers/pci.c @@ -82,8 +82,10 @@ int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\ { \ u32 val32; \ \ - if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ + if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \ + *val = -1; \ return -1; \ + } \ \ *val = (val32 >> ((offset & (int)off_mask) * 8)); \ \ -- cgit v1.1 From 79f240f7ecc0506b43ac50d1ea405ff6540d4d57 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 16 Aug 2007 22:52:39 -0500 Subject: lib_ppc: make board_add_ram_info weak platforms wishing to display RAM diagnostics in addition to size, can do so, on one line, in their own board_add_ram_info() implementation. this consequently eliminates CONFIG_ADD_RAM_INFO. Thanks to Stefan for the hint. Signed-off-by: Kim Phillips --- board/lwmon5/sdram.c | 2 -- board/netstal/hcu5/sdram.c | 2 -- cpu/ppc4xx/44x_spd_ddr2.c | 2 -- include/configs/TQM85xx.h | 1 - include/configs/hcu5.h | 1 - include/configs/katmai.h | 1 - include/configs/luan.h | 1 - include/configs/lwmon5.h | 1 - include/configs/p3mx.h | 1 - include/configs/yucca.h | 1 - lib_ppc/board.c | 11 ++++++----- 11 files changed, 6 insertions(+), 18 deletions(-) diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index f906b85..d4547e2 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -57,7 +57,6 @@ void dcbz_area(u32 start_address, u32 num_bytes); void dflush(void); -#ifdef CONFIG_ADD_RAM_INFO static u32 is_ecc_enabled(void) { u32 val; @@ -87,7 +86,6 @@ void board_add_ram_info(int use_default) val = DDR0_03_CASLAT_DECODE(val); printf(", CL%d)", val); } -#endif static int wait_for_dlllock(void) { diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 4039195..c5be8b9 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -70,7 +70,6 @@ void dflush(void); void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); -#ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { PPC440_SYS_INFO board_cfg; @@ -99,7 +98,6 @@ void board_add_ram_info(int use_default) val = DDR0_03_CASLAT_DECODE(val); printf(", CL%d)", val); } -#endif /*-------------------------------------------------------------------- * wait_for_dlllock. diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 18b90ba..67ba5bd 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -621,7 +621,6 @@ static void get_spd_info(unsigned long *dimm_populated, } } -#ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { PPC440_SYS_INFO board_cfg; @@ -642,7 +641,6 @@ void board_add_ram_info(int use_default) val = (val & SDRAM_MMODE_DCL_MASK) >> 4; printf(", CL%d)", val); } -#endif /*------------------------------------------------------------------ * For the memory DIMMs installed, this routine verifies that they diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index cb9bf54..9beb0ba 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -94,7 +94,6 @@ */ #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE -#define CONFIG_ADD_RAM_INFO 1 /* print additional info*/ #if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) /* TQM8540 & 8560 need DLL-override */ diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index d0bf251..f95d78e 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -43,7 +43,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 110ad44..b6d0f51 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -42,7 +42,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS /*----------------------------------------------------------------------- diff --git a/include/configs/luan.h b/include/configs/luan.h index 26dbec9..a09dd74 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -39,7 +39,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 604b7d1..7116c49 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -35,7 +35,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 8ae38cb..bec442d 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -60,7 +60,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 9c536fd..906f046 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -46,7 +46,6 @@ #define EXTCLK_83 83333333 #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS #undef CONFIG_STRESS diff --git a/lib_ppc/board.c b/lib_ppc/board.c index c87d46c..9aa67f9 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -209,9 +209,12 @@ static int init_baudrate (void) /***********************************************************************/ -#ifdef CONFIG_ADD_RAM_INFO -void board_add_ram_info(int); -#endif +void __board_add_ram_info(int use_default) +{ + /* please define platform specific board_add_ram_info() */ +} +void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info"))); + static int init_func_ram (void) { @@ -224,9 +227,7 @@ static int init_func_ram (void) if ((gd->ram_size = initdram (board_type)) > 0) { print_size (gd->ram_size, ""); -#ifdef CONFIG_ADD_RAM_INFO board_add_ram_info(0); -#endif putc('\n'); return (0); } -- cgit v1.1 From 05675735ef77dc23b5e0eb782bad1ff477b55e86 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sat, 18 Aug 2007 22:00:38 +0200 Subject: Update CHANGELOG. --- CHANGELOG | 878 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 878 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index da67d36..2749d69 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,432 @@ +commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57 +Author: Kim Phillips +Date: Thu Aug 16 22:52:39 2007 -0500 + + lib_ppc: make board_add_ram_info weak + + platforms wishing to display RAM diagnostics in addition to size, + can do so, on one line, in their own board_add_ram_info() + implementation. + + this consequently eliminates CONFIG_ADD_RAM_INFO. + + Thanks to Stefan for the hint. + + Signed-off-by: Kim Phillips + +commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6 +Author: Shinya Kuribayashi +Date: Fri Aug 17 12:43:44 2007 +0900 + + PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug + + This patch has been sent on: + - 6 Jun 2007 + + Many users of PCI config read routines tend to ignore the function + ret value, and are only concerned about the contents of *val. Based + on this, pci_hose_read_config_{byte,word}_via_dword should initialize + the *val on dword read error. + + Without this fix, for example, we'll go on scanning bus with vendor or + header_type uninitialized. This brings many unnecessary config trials. + + Signed-off-by: Shinya Kuribayashi + +commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367 +Author: Stefan Roese +Date: Sat Aug 18 14:37:52 2007 +0200 + + ColdFire: Fix some remaining problems with CFG_CMD_ + + Signed-off-by: Stefan Roese + +commit 8280f6a1c43247616b68224675188e5ccd124650 +Author: Stefan Roese +Date: Sat Aug 18 14:33:02 2007 +0200 + + Coding style cleanup + + Signed-off-by: Stefan Roese + +commit 4a442d3186b31893b4f77c6e82f63c4517a5224b +Author: TsiChungLiew +Date: Thu Aug 16 19:23:50 2007 -0500 + + ColdFire: Add M5235EVB Platform for MCF523x + + Signed-off-by: TsiChungLiew + +commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa +Author: Kim Phillips +Date: Fri Aug 17 09:30:00 2007 -0500 + + mpc83xx: fix typo in DDR2 programming + + introduced in the implement board_add_ram_info patch as I was cleaning out the + magic numbers. sorry. + + Signed-off-by: Kim Phillips + +commit e58fe95784d2514fc9c21028dc59f2b319a35d80 +Author: Kim Phillips +Date: Thu Aug 16 22:53:09 2007 -0500 + + mpc83xx: move freescale boards to boards/freescale + + includes build fixes. + + Signed-off-by: Kim Phillips + +commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47 +Author: Kim Phillips +Date: Thu Aug 16 22:52:59 2007 -0500 + + mpc83xx: suppress unused variable 'val8' warning + + Signed-off-by: Kim Phillips + +commit bbea46f76f767b919070b4829bf34c86bd223248 +Author: Kim Phillips +Date: Thu Aug 16 22:52:48 2007 -0500 + + mpc83xx: implement board_add_ram_info + + add board_add_ram_info, to make memory diagnostic output more + consistent. u-boot banner output now looks like: + + DRAM: 256 MB (DDR1, 64-bit, ECC on) + + and for boards with SDRAM on the local bus, a line such as this is + added: + + SDRAM: 64 MB (local bus) + + also replaced some magic numbers with their equivalent define names. + + Signed-off-by: Kim Phillips + +commit 14778585d1389d86d5846efec29e5fce892680ce +Author: Tony Li +Date: Fri Aug 17 10:35:59 2007 +0800 + + mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support + + The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c + And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board. + + Signed-off-by Tony Li + +commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7 +Author: TsiChungLiew +Date: Thu Aug 16 15:05:11 2007 -0500 + + ColdFire: Add M54455EVB for MCF5445x + + Signed-off-by: TsiChungLiew + +commit a1436a842654a8d3927d082a8ae9ee0a10da62d7 +Author: TsiChungLiew +Date: Thu Aug 16 13:20:50 2007 -0500 + + ColdFire: Add M5253EVBE platform for MCF52x2 + + Signed-off-by: TsiChungLiew + +commit a605aacd8324094199402816cc6d9124aba57b8d +Author: TsiChungLiew +Date: Thu Aug 16 05:04:31 2007 -0500 + + ColdFire: Add M5249EVB platform for MCF52x2 + + Signed-off-by: TsiChungLiew + +commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e +Author: TsiChungLiew +Date: Wed Aug 15 20:32:06 2007 -0500 + + ColdFire: Update Freescale MCF52x2 platforms + + Signed-off-by: TsiChungLiew + +commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c +Author: TsiChungLiew +Date: Wed Aug 15 19:55:10 2007 -0500 + + ColdFire: Update EB+MCF-EV123 platform + + Signed-off-by: TsiChungLiew + +commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b +Author: TsiChungLiew +Date: Wed Aug 15 19:46:38 2007 -0500 + + ColdFire: update TASREG platform for MCF52x2 + + Signed-off-by: TsiChungLiew + +commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2 +Author: TsiChungLiew +Date: Wed Aug 15 19:45:51 2007 -0500 + + ColdFire: update r5200 platform for MCF52x2 + + Signed-off-by: TsiChungLiew + +commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c +Author: TsiChungLiew +Date: Wed Aug 15 19:43:20 2007 -0500 + + ColdFire: idmr platform MCF52x2 update + + Signed-off-by: TsiChungLiew + +commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0 +Author: TsiChungLiew +Date: Wed Aug 15 19:41:06 2007 -0500 + + ColdFire: cobra5272 platform for MCF52x2 update + + Signed-off-by: TsiChungLiew + +commit 56115665b4a64c10c01440c57749b265e0908fa4 +Author: TsiChungLiew +Date: Wed Aug 15 19:38:15 2007 -0500 + + ColdFire: MCF52x2 Header files update + + Signed-off-by: TsiChungLiew + +commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d +Author: TsiChungLiew +Date: Wed Aug 15 19:21:21 2007 -0500 + + ColdFire: MCF52x2 update + + Signed-off-by: TsiChungLiew + +commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf +Author: TsiChungLiew +Date: Wed Aug 15 18:46:11 2007 -0500 + + ColdFire: MCF5329 update cache + + Signed-off-by: TsiChungLiew + +commit 7171977fb8fd77cfb6676953fa9a05789c450513 +Author: TsiChungLiew +Date: Wed Aug 15 15:40:20 2007 -0500 + + ColdFire: MCF5329 header file clean up + + Signed-off-by: TsiChungLiew + +commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723 +Author: TsiChungLiew +Date: Wed Aug 15 15:39:17 2007 -0500 + + ColdFire: MCF5329 Update and cleanup + + Signed-off-by: TsiChungLiew + +commit 10327dc5541f947c0cf7e31fef86c4706169607a +Author: Andy Fleming +Date: Thu Aug 16 16:35:02 2007 -0500 + + Add CONFIG_HAS_ETH0 to all boards with TSEC + + The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether + to update TSEC1's device-tree node, so we need to add it + to all the boards with TSECs. Do this for 83xx and 86xx, too, + since they will eventually do something similar. + + Signed-off-by: Andy Fleming + +commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666 +Author: Kumar Gala +Date: Thu Aug 16 15:05:04 2007 -0500 + + Update MPC8544 DS PCI memory map + + The PCIe bus that the ULI M1575 is connected to has no possible way of + needing more than the fixed amount of IO & Memory space needed by the ULI. + + So make it use far less IO & memory space and have it use the shared LAW. This + free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed + by each bus. + + Signed-off-by: Kumar Gala + +commit ea5877e31ed63ade948fd1293895ec23fe01472e +Author: Kumar Gala +Date: Thu Aug 16 11:01:21 2007 -0500 + + Fix up some fdt issues on 8544DS + + It looks like we had a merge issue that duplicated a bit of code + in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get + the MAC address properly set in the device tree on boot for TSEC1 + + Signed-off-by: Kumar Gala + +commit 07bc20560cb9d3d186cca268c05c82762e8c55ad +Author: Niklaus Giger +Date: Thu Aug 16 15:16:03 2007 +0200 + + PPC4xx:HCU4/5 cleanup + + Minor cleanups to confirm to the u-boot coding style. + Some german expressions -> english. + HCU5 enforces a unique IP adress for a given slot in the rack. + + Signed-off-by: Niklaus Giger + +commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb +Author: Niklaus Giger +Date: Thu Aug 16 15:16:02 2007 +0200 + + PPC4xx:HCU4/5 cleanup ecc/sdram init + + Make ecc initialisation robust, as DDR2-ECC errors may be generated + while zeroing the RAM. + + Return 16 bytes (a cacheline) less than the available memory, as the + board and/or PPC440EPx might have problems accessing the last bytes. + + Signed-off-by: Niklaus Giger + +commit d35b508a55508535b6e8445b718585d27df733d3 +Author: Kim Phillips +Date: Wed Aug 15 22:29:56 2007 -0500 + + fdt: suppress unused variable 'bd' warning + + Signed-off-by: Kim Phillips + +commit 82bd9ee77490588d4da785d75829ca63d0176baf +Author: Andy Fleming +Date: Wed Aug 15 20:06:50 2007 -0500 + + Fix warnings from of_data copy fix + + Forgot to cast of_flat_tree to ulong. + + Signed-off-by: Andy Fleming + +commit 7613afda77d5eec0f47d303025b0c661b70e4c73 +Author: Andy Fleming +Date: Wed Aug 15 20:03:44 2007 -0500 + + Don't wait for disconnected TSECs + + The TSEC driver's PHY code waits a long time for autonegotiation to + complete, even if the link is down. The PHY knows the link is + down or up before autonegotiation completes, so we can short-circuit + the process if the link is down. + + Signed-off-by: Andy Fleming + +commit b96c83d4ae475a70ef2635cd0e748174c44c8601 +Author: Andy Fleming +Date: Wed Aug 15 20:03:34 2007 -0500 + + Fix numerous bugs in the 8568 UEC support + + Actually, fixed a large bug in the UEC for *all* platforms. + How did this ever work? + + uec_init() did not follow the spec for eth_init(), and returned + 0 on success. Switch it to return the link like tsec_init() + (and 0 on error) + + The immap for the 8568 was defined based on MPC8568, rather than + CONFIG_MPC8568 + + CONFIG_QE was off + + CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0" + + Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is + enabled + + Signed-off-by: Andy Fleming + +commit 3a79013e2adda53332dfd0b511066a805e929a9d +Author: Andy Fleming +Date: Wed Aug 15 20:03:25 2007 -0500 + + Define tsec flag values in config files + + The tsec_info structure and array has a "flags" field for each + ethernet controller. This field is the only reason there are + settings. Switch to defining TSECn_FLAGS for each controller + in the config header, and we can greatly simplify the array, and + also simplify the addition of future boards. + + Signed-off-by: Andy Fleming + +commit ec7238229507e7f47533a611ea8c53319d234cf3 +Author: Andy Fleming +Date: Wed Aug 15 20:03:13 2007 -0500 + + Add support for building all boards with a TSEC + + Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards. + Now we can do a MAKEALL test on all of them! + + Signed-off-by: Andy Fleming + +commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8 +Author: Andy Fleming +Date: Wed Aug 15 17:30:56 2007 -0500 + + Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards + + The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed" + neglected to *also* put the code inside the similar #ifdef + for CONFIG_OF_FLAT_TREE. + + Signed-off-by: Andy Fleming + +commit 78f9fef7f406078c8bf7191e665a73f795157746 +Author: Scott Wood +Date: Wed Aug 15 15:46:46 2007 -0500 + + mpc885ads: Don't define CONFIG_BZIP2. + + bzip2 requires a significant chunk of malloc space, and there isn't + enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area + and a downloaded image at 0x400000. + + Signed-off-by: Scott Wood + +commit 002275a3ed8b114885f6702d6d544d0780dfe689 +Author: Michal Simek +Date: Thu Aug 16 08:54:10 2007 +0200 + + Bios emulator - fix microblaze toolchain problem + + microblaze CPU have problem with bios_emulator code. + Microblaze toolchain doesn't support PRAGMA PACK. + + Signed-off-by: Michal Simek + +commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b +Author: Wolfgang Denk +Date: Thu Aug 16 11:51:04 2007 +0200 + + Minor Coding Style fix; Update CHANGELOG file. + + Signed-off-by: Wolfgang Denk + +commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991 +Author: Stefan Roese +Date: Thu Aug 16 11:21:49 2007 +0200 + + ppc4xx: Remove #warning in esd auto_update.c + + Signed-off-by: Stefan Roese + commit 2d78074d2e806edc380c1464eb9e5df335ece65e Author: Stefan Roese Date: Fri Jun 22 17:32:28 2007 +0200 @@ -11,6 +440,101 @@ Date: Fri Jun 22 17:32:28 2007 +0200 Signed-off-by: Reinhard Arlt Signed-off-by: Stefan Roese +commit 9de469bd960cc1870bb40d6672ed42726b8b50d7 +Author: Stefan Roese +Date: Thu Aug 16 10:18:33 2007 +0200 + + ppc4xx: Only enable POST FPU test on Sequoia and not Rainier + + Signed-off-by: Stefan Roese + +commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c +Author: Stefan Roese +Date: Thu Aug 16 09:54:51 2007 +0200 + + Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files + + Signed-off-by: Stefan Roese + +commit 02ba7022f62bb75908296c58c63866e1d294b69a +Author: Stefan Roese +Date: Thu Aug 16 09:52:29 2007 +0200 + + ppc4xx: Update Sequoia/Rainier bootstrap command + + As suggested by David Mitchell, here an update for the Sequoia/Rainier + bootstrap command. + + Signed-off-by: Stefan Roese + +commit 35cc4e4823668e8745854899cfaedd4489beb0ef +Author: Kim Phillips +Date: Wed Aug 15 22:30:39 2007 -0500 + + mpc83xx: enable libfdt by default on freescale boards + + this enables libfdt code by default for the + freescale mpc8313erdb, mpc832xemds, mpc8349emds, + mpc8349itx and gp boards. + + Signed-off-by: Kim Phillips + +commit 3fde9e8b22cfbd7af489214758f9839a206576cb +Author: Kim Phillips +Date: Wed Aug 15 22:30:33 2007 -0500 + + mpc83xx: migrate remaining freescale boards to libfdt + + this adds libfdt support code for the freescale + mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx, + and gp boards. + + Boards remain compatible with OF_FLAT_TREE. + + Signed-off-by: Kim Phillips + +commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1 +Author: Kim Phillips +Date: Wed Aug 15 22:30:26 2007 -0500 + + mpc83xx: move common /memory node update mechanism to cpu.c + + also adds common prototypes to include/common.h. + + Signed-off-by: Kim Phillips + +commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85 +Author: Kim Phillips +Date: Wed Aug 15 22:30:19 2007 -0500 + + mpc83xx: remaining 8360 libfdt fixes + + PCI clocks and QE frequencies weren't being updated, and the core clock + was being updated incorrectly. This patch also adds a /memory node if + it doesn't already exist prior to update. + + plus some cosmetic trimming to single line comments. + + Signed-off-by: Kim Phillips + +commit f4b2ac5ed9aaff9920d487bff8a59696c083a524 +Author: Kim Phillips +Date: Wed Aug 15 22:30:12 2007 -0500 + + mpc83xx: fix UEC2->1 typo in libfdt setup code + + Signed-off-by: Kim Phillips + +commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3 +Author: Kim Phillips +Date: Wed Aug 15 22:30:05 2007 -0500 + + mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb + + and reorder the existing 83xx maintainers alpha. + + Signed-off-by: Kim Phillips + commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8 Author: Jon Loeliger Date: Wed Aug 15 11:55:35 2007 -0500 @@ -56,6 +580,14 @@ Date: Wed Aug 15 11:13:15 2007 -0400 Signed-off-by: Gerald Van Baren +commit 0e19209767194a97cec6d93dba9e64d1da8d548e +Author: Niklaus Giger +Date: Wed Aug 15 12:14:23 2007 +0200 + + PPC4xx:HCU4/5-Board fix compile warning + + Signed-off-by: Niklaus Giger + commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7 Author: Ed Swarthout Date: Tue Aug 14 14:06:45 2007 -0500 @@ -1394,6 +1926,78 @@ Date: Thu Aug 9 09:08:18 2007 -0500 Signed-off by: Joe Hamman +commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6 +Author: Stefan Roese +Date: Wed Aug 8 09:54:26 2007 +0200 + + Coding style cleanup + + Signed-off-by: Stefan Roese + +commit a41de1f0d373e09c782dea558385a06247111ba5 +Author: TsiChungLiew +Date: Sun Aug 5 05:15:18 2007 -0500 + + Port enabled for I2C signals and chipselects port configuration. + + Signed-off-by: TsiChungLiew + +commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f +Author: TsiChungLiew +Date: Sun Aug 5 04:31:18 2007 -0500 + + Added NAND support + + Signed-off-by: TsiChungLiew + +commit eaf9e447beb3e498818ef8ad0b8c1597cd506149 +Author: TsiChungLiew +Date: Sun Aug 5 04:11:20 2007 -0500 + + Added I2C support + + Signed-off-by: TsiChungLiew + +commit 99c03c175d2689093176facf17c58ce2cb320001 +Author: TsiChungLiew +Date: Sun Aug 5 03:58:52 2007 -0500 + + Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c + + Signed-off-by: TsiChungLiew + +commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731 +Author: TsiChungLiew +Date: Sun Aug 5 03:55:21 2007 -0500 + + Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf() + + Signed-off-by: TsiChungLiew + +commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630 +Author: TsiChungLiew +Date: Sun Aug 5 03:43:30 2007 -0500 + + Moved sync() from board file to include/asm-m68k/io.h + + Signed-off-by: TsiChungLiew + +commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2 +Author: TsiChungLiew +Date: Sun Aug 5 03:30:44 2007 -0500 + + Declared attributes of void __mii_init(void) as an alias for int mii_init(void) + + Signed-off-by: TsiChungLiew + +commit 9998bd37ead85e93953559720710d3b0685c81e6 +Author: TsiChungLiew +Date: Sun Aug 5 03:19:10 2007 -0500 + + Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART + + Signed-off-by: TsiChungLiew + commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c Author: Jason Jin Date: Tue Aug 7 16:17:06 2007 +0800 @@ -1775,6 +2379,14 @@ Date: Thu Jul 19 17:12:28 2007 +0200 Signed-off-by: Rafal Jaworowski +commit c883f6ea32dce91f07670b3aafecf6c99b1e5341 +Author: Stefan Roese +Date: Mon Jul 16 13:11:12 2007 +0200 + + Coding style cleanup + + Signed-off-by: Stefan Roese + commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf Author: Stefan Roese Date: Mon Jul 16 10:02:12 2007 +0200 @@ -2057,6 +2669,252 @@ Date: Sun Jul 8 13:44:27 2007 +0200 Signed-off-by: Stefan Roese +commit 0dca874db62718e41253659e60f3a1de7eb418ce +Author: TsiChung +Date: Tue Jul 10 15:45:43 2007 -0500 + + Cache update and added CFG_UNIFY_CACHE + + Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only. + + Signed-off-by: TsiChung + +commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005 +Author: TsiChungLiew +Date: Thu Jul 5 23:36:16 2007 -0500 + + Update header file. Include dtimer_intr_setup(). Changed timer divider to global define. + + Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER + + Signed-off-by: TsiChungLiew + +commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac +Author: TsiChungLiew +Date: Thu Jul 5 23:31:25 2007 -0500 + + Update header files + + Include immap.h and renamed mcfrtc.h to rtc.h + + Signed-off-by: TsiChungLiew + +commit 2870e98ac8e5553e9187b12a47e5f46babb53990 +Author: TsiChungLiew +Date: Thu Jul 5 23:29:21 2007 -0500 + + Add mcffec_initialize() + + Added mcffec_initialize() in eth_initialize() + + Signed-off-by: TsiChungLiew + +commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d +Author: TsiChungLiew +Date: Thu Jul 5 23:27:40 2007 -0500 + + Update header file and clean up + + Include immap.h + + Signed-off-by: TsiChungLiew + +commit 0cee9c66318602c856a899ae5fa7579ccba6443a +Author: TsiChungLiew +Date: Thu Jul 5 23:23:15 2007 -0500 + + New uart structure and defines + + Seperated from mcfuart.h + + Signed-off-by: TsiChungLiew + +commit a90e79de8d99e9c9d69d60bfff9f24c337165900 +Author: TsiChungLiew +Date: Thu Jul 5 23:22:31 2007 -0500 + + New timer structure and defines + + Seperated from mcftimer.h + + Signed-off-by: TsiChungLiew + +commit e04acb2eba4782489417240eff76e20e176aec10 +Author: TsiChungLiew +Date: Thu Jul 5 23:21:09 2007 -0500 + + Rename mcfrtc to rtc + + Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h + + Signed-off-by: TsiChungLiew + +commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5 +Author: TsiChungLiew +Date: Thu Jul 5 23:17:36 2007 -0500 + + Rename mcfserial.c. Update include header + + Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h + + Signed-off-by: TsiChungLiew + +commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e +Author: TsiChungLiew +Date: Thu Jul 5 23:13:58 2007 -0500 + + Header file update, clean up and cache handling + + Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid. + + Signed-off-by: TsiChungLiew + +commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97 +Author: TsiChungLiew +Date: Thu Jul 5 23:10:40 2007 -0500 + + Create interrupts.c and modify Makefile + + interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile + + Signed-off-by: TsiChungLiew + +commit ddd104f1ed655eda50c06ba636237a83ed943f34 +Author: TsiChungLiew +Date: Thu Jul 5 23:06:55 2007 -0500 + + Enable Icache + + Signed-off-by: TsiChungLiew + +commit b9bf3de377b2bae70c983c9b97feae914999e735 +Author: TsiChungLiew +Date: Thu Jul 5 23:05:31 2007 -0500 + + Update header file and some clean up + + Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces. + + Signed-off-by: TsiChungLiew + +commit 84a015b52ec820a5ae173717d78516de731c89c2 +Author: TsiChungLiew +Date: Thu Jul 5 23:03:28 2007 -0500 + + Update header file and enable icache + + Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r(). + + Signed-off-by: TsiChungLiew + +commit 7a17e759c7a8b58e910daf54df611e94fc8ca074 +Author: TsiChungLiew +Date: Thu Jul 5 23:01:22 2007 -0500 + + Update header file and removed interrupt_init() + + Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c + + Signed-off-by: TsiChungLiew + +commit 3b635492c95bd0d6e08f93f699821cba1f602a64 +Author: TsiChungLiew +Date: Thu Jul 5 22:57:46 2007 -0500 + + Update for flash.o and mii.o + + Removed flash.o and added mii.o + + Signed-off-by: TsiChungLiew + +commit c5ded275d839e4ff79f41718d50a835d989f57bc +Author: TsiChungLiew +Date: Thu Jul 5 22:56:19 2007 -0500 + + MII functions calls. + + Signed-off-by: TsiChungLiew + +commit 427c814104560e29bda14955c67703245aaaa5b4 +Author: TsiChungLiew +Date: Thu Jul 5 22:54:42 2007 -0500 + + Removed MII functions and replaced immap_5329.h and m5329.h with immap.h. + + The removed MII routines will be placed in mii.c. + + Signed-off-by: TsiChungLiew + +commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2 +Author: TsiChungLiew +Date: Thu Jul 5 22:51:05 2007 -0500 + + Duplicate code + + There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file. + + Signed-off-by: TsiChungLiew + +commit 2744354a8437b8f78db178e30660215688bff570 +Author: TsiChungLiew +Date: Thu Jul 5 22:46:38 2007 -0500 + + Seperate old structure defines and new structure defines + + Removed new uart structure and defines to uart.h + + Signed-off-by: TsiChungLiew + +commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230 +Author: TsiChungLiew +Date: Thu Jul 5 22:45:01 2007 -0500 + + Seperate old structure defines and new structure defines + + New timer structure and defines will move to new timer.h + + Signed-off-by: TsiChungLiew + +commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784 +Author: TsiChungLiew +Date: Thu Jul 5 22:42:23 2007 -0500 + + Clean up + + Removed whitespace + + Signed-off-by: TsiChungLiew + +commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2 +Author: TsiChungLiew +Date: Thu Jul 5 22:41:24 2007 -0500 + + Clean up + + Replaced whitespace with tabs + + Signed-off-by: TsiChungLiew + +commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd +Author: TsiChungLiew +Date: Thu Jul 5 22:39:07 2007 -0500 + + Create new header file and move peripherals base address from configs file to new header file. + + Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h. + + Signed-off-by: TsiChungLiew + +commit be296e31c4411f96d9cb3d2afc8fcb006867abfa +Author: TsiChungLiew +Date: Thu Jul 5 22:24:58 2007 -0500 + + Revert file mode + + Changed MAKEALL file mode to executable, removed executable file mode from Makefile + + Signed-off-by: TsiChungLiew + commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582 Author: Jon Loeliger Date: Tue Jul 10 11:19:50 2007 -0500 @@ -3759,6 +4617,26 @@ Date: Tue Jun 19 16:40:58 2007 +0200 Signed-off-by: Stefan Roese +commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658 +Author: TsiChung Liew +Date: Mon Jun 18 13:50:13 2007 -0500 + + Added M5329AFEE and M5329BFEE Platforms + + Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, + drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, + include/configs/M5329EVB.h, lib_m68k/interrupts.c, and + rtc/mcfrtc.c + + Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, + common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, + include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, + include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, + include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, + lib_m68k/time.c, net/eth.c and rtc/Makefile + + Signed-off-by: TsiChung Liew + commit e73846b7cf1e29ae635bf9bb5570269663df2ee5 Author: Stefan Roese Date: Fri Jun 15 11:33:41 2007 +0200 -- cgit v1.1 From 3e66c078003607a7d1d214c15a5f262bc1b4032f Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 19 Aug 2007 10:27:34 +0200 Subject: Fix some build errors. Signed-off-by: Wolfgang Denk --- drivers/net/mcffec.c | 4 ++-- drivers/serial/mcfuart.c | 4 +++- rtc/mcfrtc.c | 6 +++--- 3 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 2e0ddeb..3b81258 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -27,15 +27,15 @@ #include #include +#ifdef CONFIG_MCFFEC + #include #include #include -#include #include #include -#ifdef CONFIG_MCFFEC #undef ET_DEBUG #undef MII_DEBUG diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index bc7077d..88f3eb1 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -28,12 +28,14 @@ */ #include + +#ifdef CONFIG_MCFUART + #include #include DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_MCFUART extern void uart_port_conf(void); int serial_init(void) diff --git a/rtc/mcfrtc.c b/rtc/mcfrtc.c index 76bb510..27386e5 100644 --- a/rtc/mcfrtc.c +++ b/rtc/mcfrtc.c @@ -22,14 +22,14 @@ */ #include + +#if defined(CONFIG_MCFRTC) && defined(CONFIG_CMD_DATE) + #include #include - #include #include -#if defined(CONFIG_MCFRTC) && defined(CONFIG_CMD_DATE) - #undef RTC_DEBUG #ifndef CFG_MCFRTC_BASE -- cgit v1.1 From 3ad63878737a5a2b1e60825bf0a7d601d7a695e7 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 21 Aug 2007 16:27:57 +0200 Subject: ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based) This patch adds support for the matrix keyboard on the lwmon5 board. Since the implementation in the dsPCI is kind of compatible with the "old" lwmon board, most of the code is copied from the lwmon board directory. Signed-off-by: Stefan Roese --- board/lwmon5/Makefile | 2 +- board/lwmon5/kbd.c | 458 ++++++++++++++++++++++++++++++++++++++++++ board/lwmon5/lwmon5.c | 19 +- include/asm-ppc/global_data.h | 2 +- include/configs/lwmon5.h | 14 +- 5 files changed, 478 insertions(+), 17 deletions(-) create mode 100644 board/lwmon5/kbd.c diff --git a/board/lwmon5/Makefile b/board/lwmon5/Makefile index 06ef7f9..2a93571 100644 --- a/board/lwmon5/Makefile +++ b/board/lwmon5/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o sdram.o +COBJS = $(BOARD).o kbd.o sdram.o SOBJS = init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c new file mode 100644 index 0000000..1e5349a --- /dev/null +++ b/board/lwmon5/kbd.c @@ -0,0 +1,458 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2001, 2002 + * DENX Software Engineering + * Wolfgang Denk, wd@denx.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include + +#include +#include /* for strdup */ + +DECLARE_GLOBAL_DATA_PTR; + +static void kbd_init (void); +static int compare_magic (uchar *kbd_data, uchar *str); + +/*--------------------- Local macros and constants --------------------*/ +#define _NOT_USED_ 0xFFFFFFFF + +/*------------------------- Keyboard controller -----------------------*/ +/* command codes */ +#define KEYBD_CMD_READ_KEYS 0x01 +#define KEYBD_CMD_READ_VERSION 0x02 +#define KEYBD_CMD_READ_STATUS 0x03 +#define KEYBD_CMD_RESET_ERRORS 0x10 + +/* status codes */ +#define KEYBD_STATUS_MASK 0x3F +#define KEYBD_STATUS_H_RESET 0x20 +#define KEYBD_STATUS_BROWNOUT 0x10 +#define KEYBD_STATUS_WD_RESET 0x08 +#define KEYBD_STATUS_OVERLOAD 0x04 +#define KEYBD_STATUS_ILLEGAL_WR 0x02 +#define KEYBD_STATUS_ILLEGAL_RD 0x01 + +/* Number of bytes returned from Keyboard Controller */ +#define KEYBD_VERSIONLEN 2 /* version information */ + +/* + * This is different from the "old" lwmon dsPIC kbd controller + * implementation. Now the controller still answers with 9 bytes, + * but the last 3 bytes are always "0x06 0x07 0x08". So we just + * set the length to compare to 6 instead of 9. + */ +#define KEYBD_DATALEN 6 /* normal key scan data */ + +/* maximum number of "magic" key codes that can be assigned */ + +static uchar kbd_addr = CFG_I2C_KEYBD_ADDR; + +static uchar *key_match (uchar *); + +#define KEYBD_SET_DEBUGMODE '#' /* Magic key to enable debug output */ + +/*********************************************************************** +F* Function: int board_postclk_init (void) P*A*Z* + * +P* Parameters: none +P* +P* Returnvalue: int +P* - 0 is always returned. + * +Z* Intention: This function is the board_postclk_init() method implementation +Z* for the lwmon board. + * + ***********************************************************************/ +int board_postclk_init (void) +{ + kbd_init(); + + return (0); +} + +static void kbd_init (void) +{ + uchar kbd_data[KEYBD_DATALEN]; + uchar tmp_data[KEYBD_DATALEN]; + uchar val, errcd; + int i; + + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + + gd->kbd_status = 0; + + /* Forced by PIC. Delays <= 175us loose */ + udelay(1000); + + /* Read initial keyboard error code */ + val = KEYBD_CMD_READ_STATUS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, &errcd, 1); + /* clear unused bits */ + errcd &= KEYBD_STATUS_MASK; + /* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */ + errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT); + if (errcd) { + gd->kbd_status |= errcd << 8; + } + /* Reset error code and verify */ + val = KEYBD_CMD_RESET_ERRORS; + i2c_write (kbd_addr, 0, 0, &val, 1); + udelay(1000); /* delay NEEDED by keyboard PIC !!! */ + + val = KEYBD_CMD_READ_STATUS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, &val, 1); + + val &= KEYBD_STATUS_MASK; /* clear unused bits */ + if (val) { /* permanent error, report it */ + gd->kbd_status |= val; + return; + } + + /* + * Read current keyboard state. + * + * After the error reset it may take some time before the + * keyboard PIC picks up a valid keyboard scan - the total + * scan time is approx. 1.6 ms (information by Martin Rajek, + * 28 Sep 2002). We read a couple of times for the keyboard + * to stabilize, using a big enough delay. + * 10 times should be enough. If the data is still changing, + * we use what we get :-( + */ + + memset (tmp_data, 0xFF, KEYBD_DATALEN); /* impossible value */ + for (i=0; i<10; ++i) { + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + if (memcmp(kbd_data, tmp_data, KEYBD_DATALEN) == 0) { + /* consistent state, done */ + break; + } + /* remeber last state, delay, and retry */ + memcpy (tmp_data, kbd_data, KEYBD_DATALEN); + udelay (5000); + } +} + +/*********************************************************************** +F* Function: int misc_init_r (void) P*A*Z* + * +P* Parameters: none +P* +P* Returnvalue: int +P* - 0 is always returned, even in the case of a keyboard +P* error. + * +Z* Intention: This function is the misc_init_r() method implementation +Z* for the lwmon board. +Z* The keyboard controller is initialized and the result +Z* of a read copied to the environment variable "keybd". +Z* If KEYBD_SET_DEBUGMODE is defined, a check is made for +Z* this key, and if found display to the LCD will be enabled. +Z* The keys in "keybd" are checked against the magic +Z* keycommands defined in the environment. +Z* See also key_match(). + * +D* Design: wd@denx.de +C* Coding: wd@denx.de +V* Verification: dzu@denx.de + ***********************************************************************/ +int misc_init_r_kbd (void) +{ + uchar kbd_data[KEYBD_DATALEN]; + char keybd_env[2 * KEYBD_DATALEN + 1]; + uchar kbd_init_status = gd->kbd_status >> 8; + uchar kbd_status = gd->kbd_status; + uchar val; + char *str; + int i; + + if (kbd_init_status) { + printf ("KEYBD: Error %02X\n", kbd_init_status); + } + if (kbd_status) { /* permanent error, report it */ + printf ("*** Keyboard error code %02X ***\n", kbd_status); + sprintf (keybd_env, "%02X", kbd_status); + setenv ("keybd", keybd_env); + return 0; + } + + /* + * Now we know that we have a working keyboard, so disable + * all output to the LCD except when a key press is detected. + */ + + if ((console_assign (stdout, "serial") < 0) || + (console_assign (stderr, "serial") < 0)) { + printf ("Can't assign serial port as output device\n"); + } + + /* Read Version */ + val = KEYBD_CMD_READ_VERSION; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_VERSIONLEN); + printf ("KEYBD: Version %d.%d\n", kbd_data[0], kbd_data[1]); + + /* Read current keyboard state */ + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + for (i = 0; i < KEYBD_DATALEN; ++i) { + sprintf (keybd_env + i + i, "%02X", kbd_data[i]); + } + setenv ("keybd", keybd_env); + + str = strdup ((char *)key_match (kbd_data)); /* decode keys */ +#ifdef KEYBD_SET_DEBUGMODE + if (kbd_data[0] == KEYBD_SET_DEBUGMODE) { /* set debug mode */ + if ((console_assign (stdout, "lcd") < 0) || + (console_assign (stderr, "lcd") < 0)) { + printf ("Can't assign LCD display as output device\n"); + } + } +#endif /* KEYBD_SET_DEBUGMODE */ +#ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */ + setenv ("preboot", str); /* set or delete definition */ +#endif /* CONFIG_PREBOOT */ + if (str != NULL) { + free (str); + } + return (0); +} + +#ifdef CONFIG_PREBOOT + +static uchar kbd_magic_prefix[] = "key_magic"; +static uchar kbd_command_prefix[] = "key_cmd"; + +static int compare_magic (uchar *kbd_data, uchar *str) +{ + uchar compare[KEYBD_DATALEN-1]; + char *nxt; + int i; + + /* Don't include modifier byte */ + memcpy (compare, kbd_data+1, KEYBD_DATALEN-1); + + for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) { + uchar c; + int k; + + c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16); + + if (str == (uchar *)nxt) { /* invalid character */ + break; + } + + /* + * Check if this key matches the input. + * Set matches to zero, so they match only once + * and we can find duplicates or extra keys + */ + for (k = 0; k < sizeof(compare); ++k) { + if (compare[k] == '\0') /* only non-zero entries */ + continue; + if (c == compare[k]) { /* found matching key */ + compare[k] = '\0'; + break; + } + } + if (k == sizeof(compare)) { + return -1; /* unmatched key */ + } + } + + /* + * A full match leaves no keys in the `compare' array, + */ + for (i = 0; i < sizeof(compare); ++i) { + if (compare[i]) + { + return -1; + } + } + + return 0; +} + +/*********************************************************************** +F* Function: static uchar *key_match (uchar *kbd_data) P*A*Z* + * +P* Parameters: uchar *kbd_data +P* - The keys to match against our magic definitions +P* +P* Returnvalue: uchar * +P* - != NULL: Pointer to the corresponding command(s) +P* NULL: No magic is about to happen + * +Z* Intention: Check if pressed key(s) match magic sequence, +Z* and return the command string associated with that key(s). +Z* +Z* If no key press was decoded, NULL is returned. +Z* +Z* Note: the first character of the argument will be +Z* overwritten with the "magic charcter code" of the +Z* decoded key(s), or '\0'. +Z* +Z* Note: the string points to static environment data +Z* and must be saved before you call any function that +Z* modifies the environment. + * +D* Design: wd@denx.de +C* Coding: wd@denx.de +V* Verification: dzu@denx.de + ***********************************************************************/ +static uchar *key_match (uchar *kbd_data) +{ + char magic[sizeof (kbd_magic_prefix) + 1]; + uchar *suffix; + char *kbd_magic_keys; + + /* + * The following string defines the characters that can pe appended + * to "key_magic" to form the names of environment variables that + * hold "magic" key codes, i. e. such key codes that can cause + * pre-boot actions. If the string is empty (""), then only + * "key_magic" is checked (old behaviour); the string "125" causes + * checks for "key_magic1", "key_magic2" and "key_magic5", etc. + */ + if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) + kbd_magic_keys = ""; + + /* loop over all magic keys; + * use '\0' suffix in case of empty string + */ + for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) { + sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); + debug ("### Check magic \"%s\"\n", magic); + if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) { + char cmd_name[sizeof (kbd_command_prefix) + 1]; + char *cmd; + + sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); + + cmd = getenv (cmd_name); + debug ("### Set PREBOOT to $(%s): \"%s\"\n", + cmd_name, cmd ? cmd : "<>"); + *kbd_data = *suffix; + return ((uchar *)cmd); + } + } + debug ("### Delete PREBOOT\n"); + *kbd_data = '\0'; + return (NULL); +} +#endif /* CONFIG_PREBOOT */ + +/*********************************************************************** +F* Function: int do_kbd (cmd_tbl_t *cmdtp, int flag, +F* int argc, char *argv[]) P*A*Z* + * +P* Parameters: cmd_tbl_t *cmdtp +P* - Pointer to our command table entry +P* int flag +P* - If the CMD_FLAG_REPEAT bit is set, then this call is +P* a repetition +P* int argc +P* - Argument count +P* char *argv[] +P* - Array of the actual arguments +P* +P* Returnvalue: int +P* - 0 is always returned. + * +Z* Intention: Implement the "kbd" command. +Z* The keyboard status is read. The result is printed on +Z* the console and written into the "keybd" environment +Z* variable. + * +D* Design: wd@denx.de +C* Coding: wd@denx.de +V* Verification: dzu@denx.de + ***********************************************************************/ +int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + uchar kbd_data[KEYBD_DATALEN]; + char keybd_env[2 * KEYBD_DATALEN + 1]; + uchar val; + int i; + +#if 0 /* Done in kbd_init */ + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); +#endif + + /* Read keys */ + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + puts ("Keys:"); + for (i = 0; i < KEYBD_DATALEN; ++i) { + sprintf (keybd_env + i + i, "%02X", kbd_data[i]); + printf (" %02x", kbd_data[i]); + } + putc ('\n'); + setenv ("keybd", keybd_env); + return 0; +} + +U_BOOT_CMD( + kbd, 1, 1, do_kbd, + "kbd - read keyboard status\n", + NULL +); + +/*----------------------------- Utilities -----------------------------*/ + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + uchar kbd_data[KEYBD_DATALEN]; + uchar val; + + /* Read keys */ + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + return (compare_magic(kbd_data, (uchar *)CONFIG_POST_KEY_MAGIC) == 0); +} +#endif diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 830ec19..0958194 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -28,7 +28,8 @@ DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ -ulong flash_get_size (ulong base, int banknum); +ulong flash_get_size(ulong base, int banknum); +int misc_init_r_kbd(void); int board_early_init_f(void) { @@ -295,6 +296,11 @@ int misc_init_r(void) out_be32((void *)0xc4000024, 0x64); out_be32((void *)0xc4000020, 0x701); + /* + * Init matrix keyboard + */ + misc_init_r_kbd(); + return 0; } @@ -521,14 +527,3 @@ void hw_watchdog_reset(void) val = gpio_read_out_bit(CFG_GPIO_WATCHDOG) == 0 ? 1 : 0; gpio_write_bit(CFG_GPIO_WATCHDOG, val); } - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return (ctrlc()); -} -#endif diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index cd24636..a35013d 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -129,7 +129,7 @@ typedef struct global_data { unsigned long do_mdm_init; unsigned long be_quiet; #endif -#ifdef CONFIG_LWMON +#if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5) unsigned long kbd_status; #endif void **jt; /* jump table */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 5ebe440..14a200d 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -34,6 +34,7 @@ #define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ #define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ @@ -159,10 +160,16 @@ #define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */ #define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ +#define CFG_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" +#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ +#if 0 +#define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */ +#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */ +#endif + +#define CONFIG_PREBOOT "setenv bootdelay 15" #undef CONFIG_BOOTARGS @@ -210,6 +217,7 @@ #define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */ #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET_DELAY 300 #define CONFIG_HAS_ETH0 #define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ -- cgit v1.1 From c64fb30e4c5976007d56fc1789c7a0666082b536 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 22 Aug 2007 08:56:09 +0200 Subject: ppc4xx: Remove unused option CFG_INIT_RAM_OCM Signed-off-by: Stefan Roese --- include/configs/hcu5.h | 1 - include/configs/lwmon5.h | 1 - 2 files changed, 2 deletions(-) diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index f95d78e..9085881 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -73,7 +73,6 @@ * Initial RAM & stack pointer *----------------------------------------------------------------------*/ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ #define CFG_INIT_RAM_END (4 << 10) diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index cf8ff45..23b19ba 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -72,7 +72,6 @@ * Initial RAM & stack pointer *----------------------------------------------------------------------*/ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ #define CFG_OCM_DATA_ADDR CFG_OCM_BASE -- cgit v1.1 From c25dd8fc25e9ca3695db996a257d9ba4dab414db Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 23 Aug 2007 11:02:37 +0200 Subject: ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5 board. Now the "eeprom" command can be used to read/write from/to this device. Additionally a new command was added "eepromwp" to en-/disable the write-protect of this 2nd EEPROM. The 1st EEPROM is not affected by this write-protect command. Signed-off-by: Stefan Roese --- board/lwmon5/lwmon5.c | 27 +++++++++++++++++++++++++++ include/configs/lwmon5.h | 15 +++++++++------ 2 files changed, 36 insertions(+), 6 deletions(-) diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 0958194..77f9989 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -19,6 +19,7 @@ */ #include +#include #include #include #include @@ -527,3 +528,29 @@ void hw_watchdog_reset(void) val = gpio_read_out_bit(CFG_GPIO_WATCHDOG) == 0 ? 1 : 0; gpio_write_bit(CFG_GPIO_WATCHDOG, val); } + +int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if (argc < 2) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if ((strcmp(argv[1], "on") == 0)) { + gpio_write_bit(CFG_GPIO_EEPROM_EXT_WP, 1); + } else if ((strcmp(argv[1], "off") == 0)) { + gpio_write_bit(CFG_GPIO_EEPROM_EXT_WP, 0); + } else { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + + return 0; +} + +U_BOOT_CMD( + eepromwp, 2, 0, do_eeprom_wp, + "eepromwp- eeprom write protect off/on\n", + " - enable (on) or disable (off) I2C EEPROM write protect\n" +); diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 23b19ba..7b2def3 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -161,15 +161,16 @@ *----------------------------------------------------------------------*/ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_MULTI_EEPROMS -#define CFG_I2C_EEPROM_ADDR (0xa8>>1) -#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_I2C_EEPROM_ADDR 0x53 /* EEPROM AT24C128 */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel AT24C128 has */ + /* 64 byte page write mode using*/ + /* last 6 bits of the address */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ #define CFG_EEPROM_PAGE_WRITE_ENABLE -#define CFG_EEPROM_PAGE_WRITE_BITS 3 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 #define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */ #define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ @@ -397,6 +398,8 @@ #define CFG_GPIO_PHY1_RST 12 #define CFG_GPIO_FLASH_WP 14 #define CFG_GPIO_PHY0_RST 22 +#define CFG_GPIO_EEPROM_EXT_WP 55 +#define CFG_GPIO_EEPROM_INT_WP 57 #define CFG_GPIO_WATCHDOG 58 #define CFG_GPIO_LIME_S 59 #define CFG_GPIO_LIME_RST 60 -- cgit v1.1 From d7bfa620037a6d2210159387571bdf93aa32c162 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 24 Aug 2007 15:19:10 +0200 Subject: ppc4xx: Change GPIO signal for watchdog triggering on lwmon5 Signed-off-by: Stefan Roese --- include/configs/lwmon5.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 7b2def3..ecca577 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -400,9 +400,9 @@ #define CFG_GPIO_PHY0_RST 22 #define CFG_GPIO_EEPROM_EXT_WP 55 #define CFG_GPIO_EEPROM_INT_WP 57 -#define CFG_GPIO_WATCHDOG 58 #define CFG_GPIO_LIME_S 59 #define CFG_GPIO_LIME_RST 60 +#define CFG_GPIO_WATCHDOG 63 /*----------------------------------------------------------------------- * PPC440 GPIO Configuration -- cgit v1.1 From 75e1a84d483e36be10e206e539b028c4889e1158 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 24 Aug 2007 15:41:42 +0200 Subject: ppc4xx: Add RTC POST test to lwmon5 board configuration Since this RTC POST test is taking quite a while to complete it's only initiated upon special keypress same as the complete memory POST. Signed-off-by: Stefan Roese --- include/configs/lwmon5.h | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index ecca577..be48324 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -142,15 +142,16 @@ #endif /* POST support */ -#define CONFIG_POST (CFG_POST_MEMORY | \ - CFG_POST_ECC_ON | \ +#define CONFIG_POST (CFG_POST_CACHE | \ CFG_POST_CPU | \ - CFG_POST_UART | \ - CFG_POST_I2C | \ - CFG_POST_CACHE | \ - CFG_POST_FPU | \ + CFG_POST_ECC_ON | \ CFG_POST_ETHER | \ - CFG_POST_SPR) + CFG_POST_FPU | \ + CFG_POST_I2C | \ + CFG_POST_MEMORY | \ + CFG_POST_RTC | \ + CFG_POST_SPR | \ + CFG_POST_UART) #define CFG_POST_CACHE_ADDR 0x10000000 /* free virtual address */ #define CONFIG_LOGBUFFER -- cgit v1.1 From 9c02defc29b57945b600714cf61ddfd02b02fb14 Mon Sep 17 00:00:00 2001 From: Yuri Tikhonov Date: Sat, 25 Aug 2007 05:07:16 +0200 Subject: POST: limit memory test area to not touch global data anymore As experienced on lwmon5, on some boards the POST memory test can corrupt the global data buffer (bd). This patch fixes this issue by checking and limiting this area. Signed-off-by: Yuri Tikhonov Signed-off-by: Stefan Roese --- post/drivers/memory.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/post/drivers/memory.c b/post/drivers/memory.c index a2c088b..fbc349a 100644 --- a/post/drivers/memory.c +++ b/post/drivers/memory.c @@ -461,6 +461,9 @@ int memory_post_test (int flags) unsigned long memsize = (bd->bi_memsize >= 256 << 20 ? 256 << 20 : bd->bi_memsize) - (1 << 20); + /* Limit area to be tested with the board info struct */ + if (CFG_SDRAM_BASE + memsize > (ulong)bd) + memsize = (ulong)bd - CFG_SDRAM_BASE; if (flags & POST_SLOWTEST) { ret = memory_post_tests (CFG_SDRAM_BASE, memsize); -- cgit v1.1 From f98984cb194bb34dbe1db9429d3b51133af30d07 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 28 Aug 2007 17:39:14 +0200 Subject: IDE: - make ide_inb () and ide_outb () "weak", so boards can define there own I/O functions. (Needed for the pcs440ep board). - The default I/O Functions are again 8 Bit accesses. - Added CONFIG_CMD_IDE for the pcs440ep Board. Signed-off-by: Heiko Schocher --- board/pcs440ep/pcs440ep.c | 24 ++++++++++++++++++++++ common/cmd_ide.c | 51 +++++++++++++++------------------------------- include/asm-ppc/io.h | 3 +++ include/configs/pcs440ep.h | 13 ++++-------- include/ide.h | 2 ++ 5 files changed, 49 insertions(+), 44 deletions(-) diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index e247fee..90e99d3 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -30,6 +30,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -867,6 +868,29 @@ U_BOOT_CMD( ); #endif +#if defined (CONFIG_CMD_IDE) +/* These addresses need to be shifted one place to the left + * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0) + * These values are shifted + */ +extern ulong *ide_bus_offset; +void inline ide_outb(int dev, int port, unsigned char val) +{ + debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", + dev, port, val, (ATA_CURR_BASE(dev)+port)); + + out_be16((u16 *)(ATA_CURR_BASE(dev)+(port << 1)), val); +} +unsigned char inline ide_inb(int dev, int port) +{ + uchar val; + val = in_be16((u16 *)(ATA_CURR_BASE(dev)+(port << 1))); + debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", + dev, port, (ATA_CURR_BASE(dev)+port), val); + return (val); +} +#endif + #ifdef CONFIG_IDE_PREINIT int ide_preinit (void) { diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 89fefed..bb064ea 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -31,6 +31,7 @@ #include #include #include +#include #if defined(CONFIG_IDE_8xx_DIRECT) || defined(CONFIG_IDE_PCMCIA) # include @@ -128,8 +129,6 @@ ulong ide_bus_offset[CFG_IDE_MAXBUS] = { }; -#define ATA_CURR_BASE(dev) (CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)]) - #ifndef CONFIG_AMIGAONEG3SE static int ide_bus_ok[CFG_IDE_MAXBUS]; #else @@ -172,8 +171,8 @@ static uchar ide_wait (int dev, ulong t); #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */ -static void __inline__ ide_outb(int dev, int port, unsigned char val); -static unsigned char __inline__ ide_inb(int dev, int port); +void inline ide_outb(int dev, int port, unsigned char val); +unsigned char inline ide_inb(int dev, int port); static void input_data(int dev, ulong *sect_buf, int words); static void output_data(int dev, ulong *sect_buf, int words); static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); @@ -805,45 +804,27 @@ set_pcmcia_timing (int pmode) /* ------------------------------------------------------------------------- */ -#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA) -static void __inline__ -ide_outb(int dev, int port, unsigned char val) +void inline +__ide_outb(int dev, int port, unsigned char val) { debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", - dev, port, val, (ATA_CURR_BASE(dev)+port)); - - /* Ensure I/O operations complete */ - EIEIO; - *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))) = val; -} -#else /* ! __PPC__ */ -static void __inline__ -ide_outb(int dev, int port, unsigned char val) -{ - outb(val, ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)); + dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); + outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); } -#endif /* __PPC__ */ - +void inline ide_outb (int dev, int port, unsigned char val) + __attribute__((weak, alias("__ide_outb"))); -#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA) -static unsigned char __inline__ -ide_inb(int dev, int port) +unsigned char inline +__ide_inb(int dev, int port) { uchar val; - /* Ensure I/O operations complete */ - EIEIO; - val = *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); + val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", - dev, port, (ATA_CURR_BASE(dev)+port), val); - return (val); + dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val); + return val; } -#else /* ! __PPC__ */ -static unsigned char __inline__ -ide_inb(int dev, int port) -{ - return inb(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)); -} -#endif /* __PPC__ */ +unsigned char inline ide_inb(int dev, int port) + __attribute__((weak, alias("__ide_inb"))); #ifdef __PPC__ # ifdef CONFIG_AMIGAONEG3SE diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index 03289bc..11dfa1c 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -13,6 +13,9 @@ #define SIO_CONFIG_RA 0x398 #define SIO_CONFIG_RD 0x399 +#ifndef _IO_BASE +#define _IO_BASE 0 +#endif #define readb(addr) in_8((volatile u8 *)(addr)) #define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 8e51d2d..7653ba1 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -266,7 +266,10 @@ #define CONFIG_CMD_DIAG #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT #define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII #define CONFIG_CMD_NET @@ -274,12 +277,10 @@ #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO +#define CONFIG_CMD_REISER #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_USB - #define CONFIG_SUPPORT_VFAT /* @@ -488,10 +489,4 @@ /* Offset for alternate registers */ #define CFG_ATA_ALT_OFFSET (0x0000) -/* These addresses need to be shifted one place to the left - * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0) - * These values are shifted - */ -#define CFG_ATA_PORT_ADDR(port) ((port) << 1) - #endif /* __CONFIG_H */ diff --git a/include/ide.h b/include/ide.h index 6976a6c..222f4f8 100644 --- a/include/ide.h +++ b/include/ide.h @@ -26,6 +26,8 @@ #define IDE_BUS(dev) (dev >> 1) +#define ATA_CURR_BASE(dev) (CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)]) + #ifdef CONFIG_IDE_LED /* -- cgit v1.1 From a861558c65f65f1cf1302f3a35e9db7686b9e1a3 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 28 Aug 2007 17:40:33 +0200 Subject: [UC101] Fix: if no CF in the board, U-Boot resets sometimes. Signed-off-by: Heiko Schocher --- cpu/mpc5xxx/ide.c | 8 ++++++++ include/configs/uc101.h | 1 - 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/cpu/mpc5xxx/ide.c b/cpu/mpc5xxx/ide.c index 087ddac..344e6f2 100644 --- a/cpu/mpc5xxx/ide.c +++ b/cpu/mpc5xxx/ide.c @@ -54,11 +54,19 @@ int ide_preinit (void) /* All sample codes do that... */ *(vu_long *) MPC5XXX_ATA_SHARE_COUNT = 0; +#if defined(CONFIG_UC101) + /* Configure and reset host */ + *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = + MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR; + udelay (10); + *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = 0; +#else /* Configure and reset host */ *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY | MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR; udelay (10); *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY; +#endif /* Disable prefetch on Commbus */ psdma->PtdCntrl |= 1; diff --git a/include/configs/uc101.h b/include/configs/uc101.h index 3b471d0..aed80ec 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -332,7 +332,6 @@ #define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ #define CONFIG_IDE_PREINIT 1 -/* #define CONFIG_IDE_RESET 1 beispile siehe tqm5200.c */ #define CFG_ATA_IDE0_OFFSET 0x0000 -- cgit v1.1 From 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 29 Aug 2007 01:32:05 +0200 Subject: Minor coding style cleanup. Signed-off-by: Wolfgang Denk --- cpu/mpc5xxx/ide.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cpu/mpc5xxx/ide.c b/cpu/mpc5xxx/ide.c index 344e6f2..df5b4ac 100644 --- a/cpu/mpc5xxx/ide.c +++ b/cpu/mpc5xxx/ide.c @@ -56,7 +56,7 @@ int ide_preinit (void) #if defined(CONFIG_UC101) /* Configure and reset host */ - *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = + *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR; udelay (10); *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = 0; -- cgit v1.1 From 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 10 Aug 2007 14:34:14 -0500 Subject: fdt: remove unused OF_FLAT_TREE_MAX_SIZE references and make some minor corrections to the FDT part of the README. Signed-off-by: Kim Phillips --- README | 10 ++++------ include/configs/IceCube.h | 3 --- include/configs/MPC8313ERDB.h | 3 --- include/configs/MPC832XEMDS.h | 3 --- include/configs/MPC8349EMDS.h | 3 --- include/configs/MPC8349ITX.h | 3 --- include/configs/MPC8360EMDS.h | 4 ---- include/configs/MPC8540ADS.h | 3 --- include/configs/MPC8541CDS.h | 3 --- include/configs/MPC8544DS.h | 3 --- include/configs/MPC8548CDS.h | 3 --- include/configs/MPC8555CDS.h | 3 --- include/configs/MPC8560ADS.h | 3 --- include/configs/MPC8568MDS.h | 3 --- include/configs/MPC8641HPCN.h | 3 --- include/configs/TQM5200.h | 2 -- include/configs/jupiter.h | 3 --- include/configs/motionpro.h | 2 -- include/configs/mpc7448hpc2.h | 3 --- include/configs/sbc8349.h | 3 --- include/configs/stxxtc.h | 3 --- 21 files changed, 4 insertions(+), 65 deletions(-) diff --git a/README b/README index 4b1982b..09eb76f 100644 --- a/README +++ b/README @@ -338,7 +338,7 @@ The following options need to be configured: CONFIG_OF_LIBFDT * New libfdt-based support * Adds the "fdt" command - * The bootm command does _not_ modify the fdt + * The bootm command automatically updates the fdt CONFIG_OF_FLAT_TREE * Deprecated, see CONFIG_OF_LIBFDT @@ -347,15 +347,13 @@ The following options need to be configured: * The environment variable "disable_of", when set, disables this functionality. - CONFIG_OF_FLAT_TREE_MAX_SIZE - - The maximum size of the constructed OF tree. - OF_CPU - The proper name of the cpus node. OF_SOC - The proper name of the soc node. OF_TBCLK - The timebase frequency. OF_STDOUT_PATH - The path to the console device + boards with QUICC Engines require OF_QE to set UCC mac addresses + CONFIG_OF_HAS_BD_T * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command @@ -365,7 +363,7 @@ The following options need to be configured: CONFIG_OF_HAS_UBOOT_ENV - * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command + * CONFIG_OF_LIBFDT - enables the "fdt env" command * CONFIG_OF_FLAT_TREE - The resulting flat device tree will have a copy of u-boot's environment variables diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 53261548..bdd92ba 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -181,9 +181,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 36b0f16..6568fe1 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -231,9 +231,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8313@0" #define OF_SOC "soc8313@e0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index efc3172..c9c6d88 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -321,9 +321,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8323@0" #define OF_SOC "soc8323@e0000000" #define OF_QE "qe@e0100000" diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index c1f1c74..92555ba 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -342,9 +342,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8349@0" #define OF_SOC "soc8349@e0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 3311d5c..54cab52 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -299,9 +299,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8349@0" #define OF_SOC "soc8349@e0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 094b66e..41f062c 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -351,10 +351,6 @@ #define CONFIG_OF_HAS_BD_T 1 #define CONFIG_OF_HAS_UBOOT_ENV 1 - -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8360@0" #define OF_SOC "soc8360@e0000000" #define OF_QE "qe@e0100000" diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 22de2fb..be603ac 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -301,9 +301,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8540@0" #define OF_SOC "soc8540@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index a4727b2..4e061bd 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -312,9 +312,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8541@0" #define OF_SOC "soc8541@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 746f360..07631b9 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -252,9 +252,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8544@0" #define OF_SOC "soc8544@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 58a8ea5..682f0c0 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -336,9 +336,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8548@0" #define OF_SOC "soc8548@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 8d7d657..1d1b7c9 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -312,9 +312,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8555@0" #define OF_SOC "soc8555@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index b3c33d9..a8f362f 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -292,9 +292,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8560@0" #define OF_SOC "soc8560@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 80ccda5..d5a14fc 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -293,9 +293,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8568@0" #define OF_SOC "soc8568@e0000000" #define OF_QE "qe@e0080000" diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 03e815d..bf25f7f 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -268,9 +268,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8641@0" #define OF_SOC "soc8641@f8000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 3d98500..c08173b 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -704,8 +704,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index b68c5aa..4070ab9 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -148,9 +148,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index e0a827f..82827c6 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -420,8 +420,6 @@ extern void __led_set(led_id_t id, int state); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index f4f33f3..bd3107a 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -80,9 +80,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,7448@0" #define OF_TSI "tsi108@c0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 37a8f87..e7d8a5a 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -313,9 +313,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8349@0" #define OF_SOC "soc8349@e0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index 0dbf4b7..b035857 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -592,9 +592,6 @@ typedef unsigned int led_id_t; /* pass open firmware flat tree */ #define CONFIG_OF_FLAT_TREE 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,MPC870@0" #define OF_TBCLK (MPC8XX_HZ / 16) #define CONFIG_OF_HAS_BD_T 1 -- cgit v1.1 From 9bb8b209ed2058a5756ecbeb544c067e44a42aea Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Mon, 20 Aug 2007 07:09:05 +0200 Subject: Fix compilation error for omap2420h4_config. omap2420h4 switched to cfi, so remove old (already disabled) flash.c and flash_probe() calls in env_flash.c. Signed-off-by: Dirk Behme --- board/omap2420h4/flash.c | 537 ----------------------------------------------- common/env_flash.c | 20 +- 2 files changed, 1 insertion(+), 556 deletions(-) delete mode 100644 board/omap2420h4/flash.c diff --git a/board/omap2420h4/flash.c b/board/omap2420h4/flash.c deleted file mode 100644 index d5e106a..0000000 --- a/board/omap2420h4/flash.c +++ /dev/null @@ -1,537 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2003 - * Texas Instruments, - * Kshitij Gupta - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#define PHYS_FLASH_SECT_SIZE SZ_128K -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#undef FLASH_PORT_WIDTH32 -#define FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -# define FLASH_PORT_WIDTH ushort -# define FLASH_PORT_WIDTHV vu_short -# define SWAP(x) __swab16(x) -#else -# define FLASH_PORT_WIDTH ulong -# define FLASH_PORT_WIDTHV vu_long -# define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - - -/* Flash Organization Structure */ -typedef struct OrgDef { - unsigned int sector_number; - unsigned int sector_size; -} OrgDef; - - -/* Flash Organizations */ -OrgDef OrgIntel_28F256L18T[] = { - {4, SZ_32K}, /* 4 * 32kBytes sectors */ - {255, SZ_128K}, /* 255 * 128kBytes sectors */ -}; - - -/*----------------------------------------------------------------------- - * Functions - */ -unsigned long flash_init (void); -static ulong flash_get_size (FPW * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); -void flash_print_info (flash_info_t * info); -void flash_unprotect_sectors (FPWV * addr); -int flash_erase (flash_info_t * info, int s_first, int s_last); -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt); -void flash_unlock(flash_info_t * info, int bank); -int flash_probe(void); - -/*----------------------------------------------------------------------- - */ - -/* see if flash is ok */ -int flash_probe(void) -{ - return(flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[0])); -} - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - /* to reset the lock bit */ - flash_unlock(&flash_info[i],i); - break; - case 1: - flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_2, &flash_info[i]); - /* to reset the lock bit */ - flash_unlock(&flash_info[i],i); - break; - - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - -#ifdef CFG_ENV_IS_IN_FLASH - /* Protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); -#endif - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_unlock(flash_info_t * info, int bank) -{ - int j; - if (!bank) - j=2; /* leave 0,1 locked for boot bank */ - else - j=0; /* get the whole bank for #2 */ - - for (;jstart[j]); - if (addr == NULL) { - printf("Warning Flash probe failed\n"); - break; - } - flash_unprotect_sectors (addr); - *addr = (FPW) 0x00500050;/* clear status register */ - *addr = (FPW) 0x00FF00FF;/* resest to read mode */ - } -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - volatile int r; /* gcc 3.4.0-1 strangeness, need to follow up.*/ - - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - if (i > 254) { /* 255,256,257,258 */ - r=i; - info->start[i] = base + (((r-(int)255) * SZ_32K) + (255*PHYS_FLASH_SECT_SIZE)); - info->protect[i] = 0; - } else { - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F256L18T: - printf ("FLASH 28F256L18T\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info) -{ - volatile FPW value; - /* mb(); this one makes ARM11 err go away, but I want it :) as a guide to problems */ - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0] & 0xFF; /* just looking for 89 (8989 is hw pat)*/ - - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return(0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - switch (value) { - - case (FPW) (INTEL_ID_28F256L18T): /* 880D */ - info->flash_id += FLASH_28F256L18T; - info->sector_count = 259; /*0-258*/ - info->size = SZ_32M; - break; /* => 32 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CFG_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CFG_MAX_FLASH_SECT); - info->sector_count = CFG_MAX_FLASH_SECT; - } - - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - - return(info->size); -} - - -/* unprotects a sector for write and erase - * on some intel parts, this unprotects the entire chip, but it - * wont hurt to call this additional times per sector... - */ -void flash_unprotect_sectors (FPWV * addr) -{ -#define PD_FINTEL_WSMS_READY_MASK 0x0080 - - *addr = (FPW) 0x00500050; /* clear status register */ - - /* this sends the clear lock bit command */ - *addr = (FPW) 0x00600060; - *addr = (FPW) 0x00D000D0; -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int prot, sect; - ulong type, start, last; - int rcode = 0; -#ifdef CONFIG_USE_IRQ - int iflag; -#endif - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - - start = get_timer (0); - last = start; - -#ifdef CONFIG_USE_IRQ - /* Disable interrupts which might cause a timeout here */ - iflag = disable_interrupts (); -#endif - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - flash_unprotect_sectors (addr); - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - *addr = (FPW) 0x00500050;/* clear status register */ - *addr = (FPW) 0x00200020;/* erase setup */ - *addr = (FPW) 0x00D000D0;/* erase confirm */ - - while (((status = - *addr) & (FPW) 0x00800080) != - (FPW) 0x00800080) { - if (get_timer_masked () > - CFG_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - /* suspend erase */ - *addr = (FPW) 0x00B000B0; - /* reset to read mode */ - *addr = (FPW) 0x00FF00FF; - rcode = 1; - break; - } - } - - /* clear status register cmd. */ - *addr = (FPW) 0x00500050; - *addr = (FPW) 0x00FF00FF;/* resest to read mode */ - printf (" done\n"); - } - } -#ifdef CONFIG_USE_IRQ - if (iflag) - enable_interrupts(); -#endif - - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return(rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return(rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return(0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return(write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; -#ifdef CONFIG_USE_IRQ - int iflag; -#endif - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); - return(2); - } - /* Disable interrupts which might cause a timeout here */ -#ifdef CONFIG_USE_IRQ - iflag = disable_interrupts (); -#endif - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return(1); - } - } - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - -#ifdef CONFIG_USE_IRQ - if (iflag) - enable_interrupts(); -#endif - - return(0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/common/env_flash.c b/common/env_flash.c index 7a37e55..eccfb62 100644 --- a/common/env_flash.c +++ b/common/env_flash.c @@ -107,13 +107,6 @@ int env_init(void) ulong addr1 = (ulong)&(flash_addr->data); ulong addr2 = (ulong)&(flash_addr_new->data); -#ifdef CONFIG_OMAP2420H4 - int flash_probe(void); - - if(flash_probe() == 0) - goto bad_flash; -#endif - crc1_ok = (crc32(0, flash_addr->data, ENV_SIZE) == flash_addr->crc); crc2_ok = (crc32(0, flash_addr_new->data, ENV_SIZE) == flash_addr_new->crc); @@ -143,9 +136,6 @@ int env_init(void) gd->env_valid = 2; } -#ifdef CONFIG_OMAP2420H4 -bad_flash: -#endif return (0); } @@ -259,20 +249,12 @@ Done: int env_init(void) { -#ifdef CONFIG_OMAP2420H4 - int flash_probe(void); - - if(flash_probe() == 0) - goto bad_flash; -#endif if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) { gd->env_addr = (ulong)&(env_ptr->data); gd->env_valid = 1; return(0); } -#ifdef CONFIG_OMAP2420H4 -bad_flash: -#endif + gd->env_addr = (ulong)&default_environment[0]; gd->env_valid = 0; return (0); -- cgit v1.1 From 0e700ce03a23bb1921149bc77008ace7103d5289 Mon Sep 17 00:00:00 2001 From: Martin Krause Date: Mon, 20 Aug 2007 13:56:47 +0200 Subject: Fix compiler warning in include/s3c2410.h This patch fixes the "type qualifiers ignored on fuction return tpye" warning for include/s3c2410.h Signed-off-by: Martin Krause --- include/s3c2410.h | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/include/s3c2410.h b/include/s3c2410.h index 86495f6..87135b4 100644 --- a/include/s3c2410.h +++ b/include/s3c2410.h @@ -69,75 +69,75 @@ typedef enum { #include -static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void) +static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void) { return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE; } -static inline S3C24X0_USB_HOST * const S3C24X0_GetBase_USB_HOST(void) +static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void) { return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE; } -static inline S3C24X0_INTERRUPT * const S3C24X0_GetBase_INTERRUPT(void) +static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void) { return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE; } -static inline S3C24X0_DMAS * const S3C24X0_GetBase_DMAS(void) +static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void) { return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE; } -static inline S3C24X0_CLOCK_POWER * const S3C24X0_GetBase_CLOCK_POWER(void) +static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void) { return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE; } -static inline S3C24X0_LCD * const S3C24X0_GetBase_LCD(void) +static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void) { return (S3C24X0_LCD * const)S3C24X0_LCD_BASE; } -static inline S3C2410_NAND * const S3C2410_GetBase_NAND(void) +static inline S3C2410_NAND * S3C2410_GetBase_NAND(void) { return (S3C2410_NAND * const)S3C2410_NAND_BASE; } -static inline S3C24X0_UART * const S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) +static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) { return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000)); } -static inline S3C24X0_TIMERS * const S3C24X0_GetBase_TIMERS(void) +static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void) { return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE; } -static inline S3C24X0_USB_DEVICE * const S3C24X0_GetBase_USB_DEVICE(void) +static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void) { return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE; } -static inline S3C24X0_WATCHDOG * const S3C24X0_GetBase_WATCHDOG(void) +static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void) { return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE; } -static inline S3C24X0_I2C * const S3C24X0_GetBase_I2C(void) +static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void) { return (S3C24X0_I2C * const)S3C24X0_I2C_BASE; } -static inline S3C24X0_I2S * const S3C24X0_GetBase_I2S(void) +static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void) { return (S3C24X0_I2S * const)S3C24X0_I2S_BASE; } -static inline S3C24X0_GPIO * const S3C24X0_GetBase_GPIO(void) +static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void) { return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE; } -static inline S3C24X0_RTC * const S3C24X0_GetBase_RTC(void) +static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void) { return (S3C24X0_RTC * const)S3C24X0_RTC_BASE; } -static inline S3C2410_ADC * const S3C2410_GetBase_ADC(void) +static inline S3C2410_ADC * S3C2410_GetBase_ADC(void) { return (S3C2410_ADC * const)S3C2410_ADC_BASE; } -static inline S3C24X0_SPI * const S3C24X0_GetBase_SPI(void) +static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void) { return (S3C24X0_SPI * const)S3C24X0_SPI_BASE; } -static inline S3C2410_SDI * const S3C2410_GetBase_SDI(void) +static inline S3C2410_SDI * S3C2410_GetBase_SDI(void) { return (S3C2410_SDI * const)S3C2410_SDI_BASE; } -- cgit v1.1 From 16e23c3f5dab6937f5109365416808c7f15c122b Mon Sep 17 00:00:00 2001 From: Ed Swarthout Date: Mon, 20 Aug 2007 23:55:33 -0500 Subject: fsl_pci_init - Remove self PCSRBAR allocation CPU physical address space was being wasted by allocating a PCSRBAR PCI inbound region to it's memory space. As a rule, PCSRBAR should be left alone since it does not affect transactions from self and other masters may have changed it. Signed-off-by: Ed Swarthout --- drivers/fsl_pci_init.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/fsl_pci_init.c b/drivers/fsl_pci_init.c index 1084dc6..3a13eea 100644 --- a/drivers/fsl_pci_init.c +++ b/drivers/fsl_pci_init.c @@ -130,9 +130,14 @@ fsl_pci_init(struct pci_controller *hose) } - /* Call setup to allocate PCSRBAR window */ - pciauto_setup_device(hose, dev, 1, hose->pci_mem, + /* Use generic setup_device to initialize standard pci regs, + * but do not allocate any windows since any BAR found (such + * as PCSRBAR) is not in this cpu's memory space. + */ + + pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + #ifndef CONFIG_PCI_NOSCAN printf (" Scanning PCI bus %02x\n", hose->current_busno); hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno); -- cgit v1.1 From 4a8527ef086ec7c89f40674ef024ae6f988a614a Mon Sep 17 00:00:00 2001 From: Martin Krause Date: Tue, 21 Aug 2007 12:40:34 +0200 Subject: MPC5xxx: fix some compiler warnings in USB code Fix the following warnings: - usb.c:xx: warning: function declaration isn't a prototype - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer from pointer wihtout a cast Signed-off-by: Martin Krause --- cpu/mpc5xxx/usb.c | 6 +++--- drivers/usb_ohci.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/cpu/mpc5xxx/usb.c b/cpu/mpc5xxx/usb.c index ce709fc..ed467ab 100644 --- a/cpu/mpc5xxx/usb.c +++ b/cpu/mpc5xxx/usb.c @@ -27,7 +27,7 @@ #include -int usb_cpu_init() +int usb_cpu_init(void) { /* Set the USB Clock */ *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK; @@ -41,12 +41,12 @@ int usb_cpu_init() return 0; } -int usb_cpu_stop() +int usb_cpu_stop(void) { return 0; } -int usb_cpu_init_fail() +int usb_cpu_init_fail(void) { return 0; } diff --git a/drivers/usb_ohci.c b/drivers/usb_ohci.c index f0a37b2..14984a5 100644 --- a/drivers/usb_ohci.c +++ b/drivers/usb_ohci.c @@ -669,7 +669,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi) ed_p = &(((ed_t *)ed_p)->hwNextED)) inter = ep_rev (6, ((ed_t *)ed_p)->int_interval); ed->hwNextED = *ed_p; - *ed_p = m32_swap(ed); + *ed_p = m32_swap((unsigned long)ed); } break; } @@ -687,11 +687,11 @@ static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed, /* ED might have been unlinked through another path */ while (*ed_p != 0) { - if (((struct ed *)m32_swap (ed_p)) == ed) { + if (((struct ed *)m32_swap ((unsigned long)ed_p)) == ed) { *ed_p = ed->hwNextED; break; } - ed_p = & (((struct ed *)m32_swap (ed_p))->hwNextED); + ed_p = & (((struct ed *)m32_swap ((unsigned long)ed_p))->hwNextED); } } } -- cgit v1.1 From 5f470948570526e9186f053a3003da7719604e90 Mon Sep 17 00:00:00 2001 From: stefano babic Date: Tue, 21 Aug 2007 15:50:33 +0200 Subject: Fix MAC address setting in DM9000 driver. The logic to check if there is a correct MAC address in the DM9000 EEPROM, added in the last patch, is wrong. Now the MAC address is always taken from the environment, even if a suitable MAC is present in the EEPROM. Signed-off-by: Stefano Babic --- drivers/dm9000x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dm9000x.c b/drivers/dm9000x.c index 78acb09..e0d531b 100644 --- a/drivers/dm9000x.c +++ b/drivers/dm9000x.c @@ -303,8 +303,8 @@ eth_init(bd_t * bd) for (i = 0; i < 6; i++) ((u16 *) bd->bi_enetaddr)[i] = read_srom_word(i); - if (!is_zero_ether_addr(bd->bi_enetaddr) && - !is_mutlicast_ether_addr(bd->bi_enetaddr)) { + if (is_zero_ether_addr(bd->bi_enetaddr) || + is_multicast_ether_addr(bd->bi_enetaddr)) { /* try reading from environment */ u8 i; char *s, *e; @@ -542,7 +542,7 @@ read_srom_word(int offset) { DM9000_iow(DM9000_EPAR, offset); DM9000_iow(DM9000_EPCR, 0x4); - udelay(200); + udelay(8000); DM9000_iow(DM9000_EPCR, 0x0); return (DM9000_ior(DM9000_EPDRL) + (DM9000_ior(DM9000_EPDRH) << 8)); } -- cgit v1.1 From ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd Mon Sep 17 00:00:00 2001 From: stefano babic Date: Tue, 21 Aug 2007 15:52:33 +0200 Subject: Fix: TFTP is not working on little endian systems TFTP does not work anymore after multicast tftp patch was applied on little endian systems. This patch fix it. Signed-off-by: Stefano Babic --- net/tftp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/tftp.c b/net/tftp.c index d6db91c..fb2f505 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -178,7 +178,7 @@ TftpSend (void) pkt += strlen((char *)pkt) + 1; /* try for more effic. blk size */ pkt += sprintf((char *)pkt,"blksize%c%d%c", - 0,htons(TftpBlkSizeOption),0); + 0,TftpBlkSizeOption,0); #ifdef CONFIG_MCAST_TFTP /* Check all preconditions before even trying the option */ if (!ProhibitMcast -- cgit v1.1 From 7608d75f9c87c9eb5b3a43219d0506d3e979a13f Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 21 Aug 2007 17:00:17 -0500 Subject: support board vendor-common makefiles if a board/$(VENDOR)/common/Makefile exists, build it. also add the first such case, board/freescale/common/Makefile, to handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as dictated by board configuration. thusly get rid of alternate build dir errors such as: FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory by putting the common/ mkdir command in its proper place (the common Makefile). Common bits from existing individual board Makefiles have been removed. Signed-off-by: Kim Phillips --- Makefile | 2 ++ board/freescale/common/Makefile | 56 ++++++++++++++++++++++++++++++++++++ board/freescale/common/pixis.c | 3 ++ board/freescale/common/pq-mds-pib.c | 3 ++ board/freescale/mpc832xemds/Makefile | 2 +- board/freescale/mpc8360emds/Makefile | 2 +- board/freescale/mpc8544ds/Makefile | 7 +---- board/freescale/mpc8641hpcn/Makefile | 8 +----- include/configs/MPC8544DS.h | 1 + include/configs/MPC8641HPCN.h | 1 + 10 files changed, 70 insertions(+), 15 deletions(-) create mode 100644 board/freescale/common/Makefile diff --git a/Makefile b/Makefile index 2e15cea..0477cd3 100644 --- a/Makefile +++ b/Makefile @@ -190,6 +190,8 @@ endif OBJS := $(addprefix $(obj),$(OBJS)) LIBS = lib_generic/libgeneric.a +LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ + "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) LIBS += board/$(BOARDDIR)/lib$(BOARD).a LIBS += cpu/$(CPU)/lib$(CPU).a ifdef SOC diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile new file mode 100644 index 0000000..44f613e --- /dev/null +++ b/board/freescale/common/Makefile @@ -0,0 +1,56 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)board/$(VENDOR)/common) +endif + +LIB = $(obj)lib$(VENDOR).a + +COBJS := sys_eeprom.o \ + pixis.o \ + pq-mds-pib.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index 99cc2ee..ae4bef1 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -27,6 +27,8 @@ #include #include +#ifdef CONFIG_FSL_PIXIS + #include "pixis.h" @@ -470,3 +472,4 @@ U_BOOT_CMD( " pixis_reset altbank cf \n" " pixis_reset cf \n" ); +#endif /* CONFIG_FSL_PIXIS */ diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c index 8c013c7..d79f2eb 100644 --- a/board/freescale/common/pq-mds-pib.c +++ b/board/freescale/common/pq-mds-pib.c @@ -12,6 +12,8 @@ #include #include +#ifdef CONFIG_PQ_MDS_PIB + #include "pq-mds-pib.h" int pib_init(void) @@ -100,3 +102,4 @@ int pib_init(void) i2c_set_bus_num(orig_i2c_bus); return 0; } +#endif /* CONFIG_PQ_MDS_PIB */ diff --git a/board/freescale/mpc832xemds/Makefile b/board/freescale/mpc832xemds/Makefile index ea52484..5ec7a87 100644 --- a/board/freescale/mpc832xemds/Makefile +++ b/board/freescale/mpc832xemds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o +COBJS := $(BOARD).o pci.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8360emds/Makefile b/board/freescale/mpc8360emds/Makefile index ea52484..5ec7a87 100644 --- a/board/freescale/mpc8360emds/Makefile +++ b/board/freescale/mpc8360emds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o +COBJS := $(BOARD).o pci.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8544ds/Makefile b/board/freescale/mpc8544ds/Makefile index 308f707..006fdc9 100644 --- a/board/freescale/mpc8544ds/Makefile +++ b/board/freescale/mpc8544ds/Makefile @@ -24,14 +24,9 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o \ - ../common/pixis.o +COBJS := $(BOARD).o SOBJS := init.o diff --git a/board/freescale/mpc8641hpcn/Makefile b/board/freescale/mpc8641hpcn/Makefile index 93b015d..201da3e 100644 --- a/board/freescale/mpc8641hpcn/Makefile +++ b/board/freescale/mpc8641hpcn/Makefile @@ -23,15 +23,9 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o \ - ../common/sys_eeprom.o \ - ../common/pixis.o +COBJS := $(BOARD).o SOBJS := init.o diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 07631b9..9743f03 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -181,6 +181,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */ #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ +#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ #define PIXIS_ID 0x0 /* Board ID at offset 0 */ #define PIXIS_VER 0x1 /* Board version at offset 1 */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index bf25f7f..7d8a380 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -185,6 +185,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ +#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ #define PIXIS_ID 0x0 /* Board ID at offset 0 */ #define PIXIS_VER 0x1 /* Board version at offset 1 */ -- cgit v1.1 From 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b Mon Sep 17 00:00:00 2001 From: Jason Jin Date: Wed, 22 Aug 2007 17:54:49 +0800 Subject: Remove the bios emulator binary files from MAI board Signed-off-by: Jason Jin --- board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake | Bin 70812 -> 0 bytes board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp | Bin 37612 -> 0 bytes board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo | Bin 11924 -> 0 bytes board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm | Bin 38300 -> 0 bytes .../MAI/bios_emulator/scitech/bin-linux/glibc/makedep | Bin 58623 -> 0 bytes board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm | Bin 263498 -> 0 bytes .../MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm | Bin 100192 -> 0 bytes board/MAI/bios_emulator/scitech/bin-linux/glibc/trans | Bin 9244 -> 0 bytes board/MAI/bios_emulator/scitech/bin-linux/libc/dmake | Bin 71264 -> 0 bytes board/MAI/bios_emulator/scitech/bin-linux/libc/nasm | Bin 168228 -> 0 bytes board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm | Bin 66888 -> 0 bytes board/MAI/bios_emulator/scitech/bin-linux/libc/trans | Bin 8984 -> 0 bytes board/MAI/bios_emulator/scitech/makedefs/makedefs.prj | Bin 9025 -> 0 bytes board/MAI/bios_emulator/scitech/src/pm/os2/dossctl.obj | Bin 59 -> 0 bytes 14 files changed, 0 insertions(+), 0 deletions(-) delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/glibc/makedep delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/glibc/trans delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/libc/dmake delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/libc/nasm delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm delete mode 100755 board/MAI/bios_emulator/scitech/bin-linux/libc/trans delete mode 100644 board/MAI/bios_emulator/scitech/makedefs/makedefs.prj delete mode 100644 board/MAI/bios_emulator/scitech/src/pm/os2/dossctl.obj diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake b/board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake deleted file mode 100755 index 4d6ccb3..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp deleted file mode 100755 index d372949..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo deleted file mode 100755 index 6f65d41..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm deleted file mode 100755 index 7de5030..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/makedep b/board/MAI/bios_emulator/scitech/bin-linux/glibc/makedep deleted file mode 100755 index 5451b22..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/glibc/makedep and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm b/board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm deleted file mode 100755 index fbd3352..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm b/board/MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm deleted file mode 100755 index dd14a7a..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/bin-linux/glibc/trans b/board/MAI/bios_emulator/scitech/bin-linux/glibc/trans deleted file mode 100755 index a1aea4f..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/glibc/trans and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/bin-linux/libc/dmake b/board/MAI/bios_emulator/scitech/bin-linux/libc/dmake deleted file mode 100755 index f198f29..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/libc/dmake and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/bin-linux/libc/nasm b/board/MAI/bios_emulator/scitech/bin-linux/libc/nasm deleted file mode 100755 index e312a0b..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/libc/nasm and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm b/board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm deleted file mode 100755 index 9fe81a3..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/bin-linux/libc/trans b/board/MAI/bios_emulator/scitech/bin-linux/libc/trans deleted file mode 100755 index e536c04..0000000 Binary files a/board/MAI/bios_emulator/scitech/bin-linux/libc/trans and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/makedefs/makedefs.prj b/board/MAI/bios_emulator/scitech/makedefs/makedefs.prj deleted file mode 100644 index edd8809..0000000 Binary files a/board/MAI/bios_emulator/scitech/makedefs/makedefs.prj and /dev/null differ diff --git a/board/MAI/bios_emulator/scitech/src/pm/os2/dossctl.obj b/board/MAI/bios_emulator/scitech/src/pm/os2/dossctl.obj deleted file mode 100644 index 5533346..0000000 Binary files a/board/MAI/bios_emulator/scitech/src/pm/os2/dossctl.obj and /dev/null differ -- cgit v1.1 From 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933 Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Thu, 23 Aug 2007 15:20:54 -0400 Subject: Enable L2 cache for MPC8568MDS board The L2 cache size is 512KB for 8568, print out the correct informaiton. Signed-off-by: Haiying Wang --- cpu/mpc85xx/cpu_init.c | 2 +- include/configs/MPC8568MDS.h | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index 7b99610..79ad20c 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -247,7 +247,7 @@ int cpu_init_r(void) switch (cache_ctl & 0x30000000) { case 0x20000000: if (ver == SVR_8548 || ver == SVR_8548_E || - ver == SVR_8544) { + ver == SVR_8544 || ver == SVR_8568_E) { printf ("L2 cache 512KB:"); /* set L2E=1, L2I=1, & L2SRAM=0 */ cache_ctl = 0xc0000000; diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index d5a14fc..ba744e9 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -63,9 +63,9 @@ extern unsigned long get_clock_freq(void); /* * These can be toggled for performance analysis, otherwise use default. */ -/*#define CONFIG_L2_CACHE*/ /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ /* * Only possible on E500 Version 2 or newer cores. -- cgit v1.1 From 4bf4abb8a4e9955556b120a1aafa30c03e74032a Mon Sep 17 00:00:00 2001 From: Ed Swarthout Date: Tue, 21 Aug 2007 09:38:59 -0500 Subject: 8548cds fixes Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the correct consoledev needed for linux boot. Standardize on fdt{file,addr} var to hold dtb file name. Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}. Signed-off-by: Ed Swarthout --- board/cds/mpc8548cds/mpc8548cds.c | 14 +++++++++++--- include/configs/MPC8548CDS.h | 15 ++++++--------- 2 files changed, 17 insertions(+), 12 deletions(-) diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c index 48753d7..796ae22 100644 --- a/board/cds/mpc8548cds/mpc8548cds.c +++ b/board/cds/mpc8548cds/mpc8548cds.c @@ -362,20 +362,28 @@ pci_init_board(void) ); - /* outbound memory */ + /* inbound */ pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + + /* outbound memory */ + pci_set_region(hose->regions + 1, CFG_PCI1_MEM_BASE, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 1, + pci_set_region(hose->regions + 2, CFG_PCI1_IO_BASE, CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 2; + hose->region_count = 3; /* relocate config table pointers */ hose->config_table = \ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 682f0c0..6083715 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -633,7 +633,6 @@ extern unsigned long get_clock_freq(void); #define ENET_ENV "" #endif -#if 0 #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ @@ -646,8 +645,8 @@ extern unsigned long get_clock_freq(void); "consoledev=ttyS1\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=ramdisk.uboot\0" \ - "dtbaddr=c00000\0" \ - "dtbfile=mpc8548cds.dtb\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=mpc8548cds.dtb\0" \ "eoi=mw e00400b0 0\0" \ "iack=md e00400a0 1\0" \ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ @@ -669,8 +668,6 @@ extern unsigned long get_clock_freq(void); PCI_ENV1 \ PCI_ENV2 \ ENET_ENV -#endif - #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ @@ -678,8 +675,8 @@ extern unsigned long get_clock_freq(void); "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr - $dtbaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ @@ -687,8 +684,8 @@ extern unsigned long get_clock_freq(void); "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr $ramdiskaddr $dtbaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND -- cgit v1.1 From 9468e6804b7e25b0f6f52e53f47bce3175400a16 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 20 Aug 2007 09:44:00 -0500 Subject: Fix MPC8544DS PCIe3 scsi. The problem is pciauto_setup_device() getting called from fsl_pci_init.c is allocating memory space it doesn't need. Signed-off-by: Ed Swarthout Signed-off-by: Andy Fleming --- drivers/fsl_pci_init.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/fsl_pci_init.c b/drivers/fsl_pci_init.c index 3a13eea..a4ce458 100644 --- a/drivers/fsl_pci_init.c +++ b/drivers/fsl_pci_init.c @@ -54,6 +54,7 @@ fsl_pci_init(struct pci_controller *hose) u8 temp8; int r; int bridge; + unsigned long bus_lower_temp; volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr; pci_dev_t dev = PCI_BDF(busno,0,0); @@ -134,9 +135,10 @@ fsl_pci_init(struct pci_controller *hose) * but do not allocate any windows since any BAR found (such * as PCSRBAR) is not in this cpu's memory space. */ - + bus_lower_temp = hose->pci_mem->bus_lower; pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + hose->pci_mem->bus_lower = bus_lower_temp; #ifndef CONFIG_PCI_NOSCAN printf (" Scanning PCI bus %02x\n", hose->current_busno); -- cgit v1.1 From 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 29 Aug 2007 13:35:03 +0200 Subject: Disable network support on cmi_mpc5xx board ..because it caused compiler errors and there seems to be no board maintainer to take care of this. Signed-off-by: Wolfgang Denk --- include/configs/cmi_mpc5xx.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index cd92af2..85c2b96 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -59,6 +59,8 @@ */ #include +#undef CONFIG_CMD_NET /* disabeled - causes compile errors */ + #define CONFIG_CMD_MEMORY #define CONFIG_CMD_LOADB #define CONFIG_CMD_REGINFO -- cgit v1.1 From c5bded3c88e48ae648a75d357dc81a8255fa81f1 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 29 Aug 2007 14:05:30 +0200 Subject: Add mii_init() prototype to get rid of a *lot* of compiler warnings. Signed-off-by: Wolfgang Denk --- include/common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/common.h b/include/common.h index d6286bc..9a5a0ab 100644 --- a/include/common.h +++ b/include/common.h @@ -565,7 +565,7 @@ ulong bootcount_load (void); #define BOOTCOUNT_MAGIC 0xB001C041 /* $(CPU)/.../ */ -/*void mii_init (void);*/ +void mii_init (void); /* $(CPU)/.../lcd.c */ ulong lcd_setmem (ulong); -- cgit v1.1 From 2602a5c40ae37ab965a4e240854fdaffb51328a4 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 29 Aug 2007 09:06:05 -0500 Subject: sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE this had slipped through the cracks, since the sbc board was added after I wrote the original patch to remove all these symbols, and before it was merged. Signed-off-by: Kim Phillips --- include/configs/sbc8641d.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 3525ab4..54eac38 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -270,9 +270,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8641@0" #define OF_SOC "soc@f8000000" #define OF_TBCLK (bd->bi_busfreq / 4) -- cgit v1.1 From 8f1bc28408ded213418d9bc0780c7d8fb8a03774 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 29 Aug 2007 18:26:24 -0600 Subject: tftp: don't implicity trust the format of recevied packets The TFTP OACK code trusts that the incoming packet is formated as ASCII text and can be processed by string functions. It also has a loop limit overflow bug where if the packet length is less than 8, it ends up looping over *all* of memory to find the 'blksize' string. This patch solves the problem by forcing the packet to be null terminated and using strstr() to search for the sub string. Signed-off-by: Grant Likely --- net/tftp.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/net/tftp.c b/net/tftp.c index fb2f505..27f5e88 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -238,9 +238,9 @@ TftpSend (void) static void TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) { + char * blksize; ushort proto; ushort *s; - int i; if (dest != TftpOurPort) { #ifdef CONFIG_MCAST_TFTP @@ -272,22 +272,22 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) case TFTP_OACK: #ifdef ET_DEBUG - printf("Got OACK: %s %s\n", pkt, pkt+strlen(pkt)+1); + printf("Got OACK:\n"); + print_buffer (0, pkt, 1, len, 16); #endif TftpState = STATE_OACK; TftpServerPort = src; + /* Check for 'blksize' option */ - for (i=0;i Date: Thu, 30 Aug 2007 02:26:17 -0500 Subject: Revert "Fix MPC8544DS PCIe3 scsi." This reverts commit 9468e680. Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient. Signed-off-by: Ed Swarthout --- drivers/fsl_pci_init.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/fsl_pci_init.c b/drivers/fsl_pci_init.c index a4ce458..3a13eea 100644 --- a/drivers/fsl_pci_init.c +++ b/drivers/fsl_pci_init.c @@ -54,7 +54,6 @@ fsl_pci_init(struct pci_controller *hose) u8 temp8; int r; int bridge; - unsigned long bus_lower_temp; volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr; pci_dev_t dev = PCI_BDF(busno,0,0); @@ -135,10 +134,9 @@ fsl_pci_init(struct pci_controller *hose) * but do not allocate any windows since any BAR found (such * as PCSRBAR) is not in this cpu's memory space. */ - bus_lower_temp = hose->pci_mem->bus_lower; + pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); - hose->pci_mem->bus_lower = bus_lower_temp; #ifndef CONFIG_PCI_NOSCAN printf (" Scanning PCI bus %02x\n", hose->current_busno); -- cgit v1.1 From ff13ac8c7bbebb238e339592de765c546dba1073 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 30 Aug 2007 14:42:15 +0200 Subject: Backout commit 8f1bc284 as it causes TFTP to fail. Signed-off-by: Wolfgang Denk --- net/tftp.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/net/tftp.c b/net/tftp.c index 27f5e88..fb2f505 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -238,9 +238,9 @@ TftpSend (void) static void TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) { - char * blksize; ushort proto; ushort *s; + int i; if (dest != TftpOurPort) { #ifdef CONFIG_MCAST_TFTP @@ -272,22 +272,22 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) case TFTP_OACK: #ifdef ET_DEBUG - printf("Got OACK:\n"); - print_buffer (0, pkt, 1, len, 16); + printf("Got OACK: %s %s\n", pkt, pkt+strlen(pkt)+1); #endif TftpState = STATE_OACK; TftpServerPort = src; - /* Check for 'blksize' option */ - pkt[len] = 0; /* NULL terminate so string ops work */ - blksize = strstr((char*)pkt, "blksize"); - if ((blksize) && (blksize + 8 < (char*)pkt + len)) { - TftpBlkSize = simple_strtoul(blksize + 8, NULL, 10); + for (i=0;i Date: Fri, 31 Aug 2007 10:01:51 +0200 Subject: Fix TFTP OACK code for short packets. The old code had a loop limit overflow bug which caused a semi- infinite loop for small packets, because in "i --- net/tftp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/tftp.c b/net/tftp.c index fb2f505..5ee7676 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -276,8 +276,12 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) #endif TftpState = STATE_OACK; TftpServerPort = src; - /* Check for 'blksize' option */ - for (i=0;i Date: Fri, 31 Aug 2007 15:21:46 +0200 Subject: ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is set to non-zero, because it doesn't support MRM (memory-read- multiple) correctly. We now added the possibility to configure this register in the board config file, so that the default value of 8 can be overridden. Here the details of this patch: o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow board-specific settings. As an example the sequoia board requires 0. Idea from Stefan Roese . o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the PCI IO-space. Obtained from Stefan Roese . o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set CFG_PCI_CACHE_LINE_SIZE to 0. Signed-off-by: Gary Jennejohn Signed-off-by: Stefan Roese --- board/amcc/sequoia/init.S | 3 +++ drivers/pci_auto.c | 8 +++++++- include/configs/sequoia.h | 3 ++- 3 files changed, 12 insertions(+), 2 deletions(-) diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S index 45bcd4b..5fe3af9 100644 --- a/board/amcc/sequoia/init.S +++ b/board/amcc/sequoia/init.S @@ -126,6 +126,9 @@ tlbtab: /* TLB-entry for peripherals */ tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + /* TLB-entry PCI IO Space - from sr@denx.de */ + tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbtab_end #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c index 2378553..acfda83 100644 --- a/drivers/pci_auto.c +++ b/drivers/pci_auto.c @@ -28,6 +28,11 @@ #define PCIAUTO_IDE_MODE_MASK 0x05 +/* the user can define CFG_PCI_CACHE_LINE_SIZE to avoid problems */ +#ifndef CFG_PCI_CACHE_LINE_SIZE +#define CFG_PCI_CACHE_LINE_SIZE 8 +#endif + /* * */ @@ -150,7 +155,8 @@ void pciauto_setup_device(struct pci_controller *hose, } pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, + CFG_PCI_CACHE_LINE_SIZE); pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); } diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 824a812..c2e1386 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -400,7 +400,8 @@ *----------------------------------------------------------------------*/ /* General PCI */ #define CONFIG_PCI /* include pci support */ -#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ -- cgit v1.1 From f75e89e9b5714db2b0e80074071dfbdd6f59488a Mon Sep 17 00:00:00 2001 From: Ed Swarthout Date: Thu, 30 Aug 2007 01:58:48 -0500 Subject: ft_board_setup update 85xx/86xx of pci/pcie bus-range property. pcie is now differentiated from pci. Add 8641 bus-range updates. Signed-off-by: Ed Swarthout --- board/cds/mpc8548cds/mpc8548cds.c | 2 +- board/freescale/mpc8544ds/mpc8544ds.c | 14 +++++++++++--- board/freescale/mpc8641hpcn/mpc8641hpcn.c | 16 ++++++++++++++++ 3 files changed, 28 insertions(+), 4 deletions(-) diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c index 796ae22..36d7e1e 100644 --- a/board/cds/mpc8548cds/mpc8548cds.c +++ b/board/cds/mpc8548cds/mpc8548cds.c @@ -542,7 +542,7 @@ ft_pci_setup(void *blob, bd_t *bd) #endif #ifdef CONFIG_PCIE1 - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@a000/bus-range", &len); + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@a000/bus-range", &len); if (p != NULL) { p[0] = 0; p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 80822be..4c3b27f 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -516,8 +516,16 @@ ft_board_setup(void *blob, bd_t *bd) *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#ifdef CONFIG_PCI1 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pci1_hose.last_busno - pci1_hose.first_busno; + debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif #ifdef CONFIG_PCIE1 - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@a000/bus-range", &len); + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@a000/bus-range", &len); if (p != NULL) { p[0] = 0; p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; @@ -525,7 +533,7 @@ ft_board_setup(void *blob, bd_t *bd) } #endif #ifdef CONFIG_PCIE2 - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@9000/bus-range", &len); + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len); if (p != NULL) { p[0] = 0; p[1] = pcie2_hose.last_busno - pcie2_hose.first_busno; @@ -533,7 +541,7 @@ ft_board_setup(void *blob, bd_t *bd) } #endif #ifdef CONFIG_PCIE3 - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@b000/bus-range", &len); + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@b000/bus-range", &len); if (p != NULL) { p[0] = 0; p[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;; diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index ffd11cb..931be9f 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -338,6 +338,22 @@ ft_board_setup(void *blob, bd_t *bd) *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#ifdef CONFIG_PCI1 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@8000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pci1_hose.last_busno - pci1_hose.first_busno; + debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif +#ifdef CONFIG_PCI2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pci2_hose.last_busno - pci2_hose.first_busno; + debug("PCI@9000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif } #endif -- cgit v1.1 From 56a9270521baaa00e12639a978302a67f61ef060 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 30 Aug 2007 16:18:18 -0500 Subject: Fix ULI RTC support on MPC8544 DS The RTC on the M1575 ULI chipset requires a dummy read before we are able to talk to the RTC. We accomplish this by adding a second memory region to the PHB the ULI is on and read from it. The second region is added to maintain compatiabilty with Linux's view of the PCI memory map. Signed-off-by: Kumar Gala --- board/freescale/mpc8544ds/init.S | 2 +- board/freescale/mpc8544ds/mpc8544ds.c | 6 ++++++ include/configs/MPC8544DS.h | 3 +++ 3 files changed, 10 insertions(+), 1 deletion(-) diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S index 900c368..68ccba7 100644 --- a/board/freescale/mpc8544ds/init.S +++ b/board/freescale/mpc8544ds/init.S @@ -237,6 +237,6 @@ law_entry: /* contains both PCIE3 MEM & IO space */ .long (CFG_PCIE3_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_2M) + .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_4M) 4: entry_end diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 4c3b27f..76d9091 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -222,6 +223,11 @@ pci_init_board(void) printf (" PCIE3 on bus %02x - %02x\n", hose->first_busno,hose->last_busno); + /* + * Activate ULI1575 legacy chip by performing a fake + * memory access. Needed to make ULI RTC work. + */ + in_be32(CFG_PCIE3_MEM_BASE); } else { printf (" PCIE3: disabled\n"); } diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 9743f03..f580cca 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -310,6 +310,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_PCIE3_IO_BASE 0x00000000 #define CFG_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ #define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE3_MEM_BASE2 0xb0200000 +#define CFG_PCIE3_MEM_PHYS2 CFG_PCIE3_MEM_BASE2 +#define CFG_PCIE3_MEM_SIZE2 0x00200000 /* 1M */ #if defined(CONFIG_PCI) -- cgit v1.1 From 41bb76e941929f54a73206fb132f7a4c275543a3 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 6 Sep 2007 09:46:17 -0600 Subject: libfdt: add convenience function fdt_find_and_setprop() Given the path to a node, fdt_find_and_setprop() allows a property value to be set directly. Signed-off-by: Grant Likely --- include/libfdt.h | 2 ++ libfdt/fdt_rw.c | 26 ++++++++++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/include/libfdt.h b/include/libfdt.h index 340e89d..38c65a9 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -140,6 +140,8 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name, }) #define fdt_setprop_string(fdt, nodeoffset, name, str) \ fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) +int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, + const void *val, int len, int create); int fdt_delprop(void *fdt, int nodeoffset, const char *name); int fdt_add_subnode_namelen(void *fdt, int parentoffset, const char *name, int namelen); diff --git a/libfdt/fdt_rw.c b/libfdt/fdt_rw.c index 693bfe4..55fcc41 100644 --- a/libfdt/fdt_rw.c +++ b/libfdt/fdt_rw.c @@ -188,6 +188,32 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name, return 0; } +/** + * fdt_find_and_setprop: Find a node and set it's property + * + * @fdt: ptr to device tree + * @node: path of node + * @prop: property name + * @val: ptr to new value + * @len: length of new property value + * @create: flag to create the property if it doesn't exist + * + * Convenience function to directly set a property given the path to the node. + */ +int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, + const void *val, int len, int create) +{ + int nodeoff = fdt_find_node_by_path(fdt, node); + + if (nodeoff < 0) + return nodeoff; + + if ((!create) && (fdt_get_property(fdt, nodeoff, prop, 0) == NULL)) + return 0; /* create flag not set; so exit quietly */ + + return fdt_setprop(fdt, nodeoff, prop, val, len); +} + int fdt_delprop(void *fdt, int nodeoffset, const char *name) { struct fdt_property *prop; -- cgit v1.1 From cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 6 Sep 2007 09:46:23 -0600 Subject: Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200 Tested on: lite5200b Note: the fixup functions have not been moved to a common place. This patch is targeted for immediate merging as in solves a build issue, but the final name/location of the fixups is still subject to debate. I propose to merge this now, and move the fixups in the next merge window to be usable by all targets. Signed-off-by: Grant Likely --- board/icecube/icecube.c | 7 ++--- board/jupiter/jupiter.c | 8 ++---- board/motionpro/motionpro.c | 8 +++--- board/tqm5200/tqm5200.c | 9 +++---- cpu/mpc5xxx/cpu.c | 66 ++++++++++++++++++++++++++++----------------- include/configs/IceCube.h | 2 +- include/configs/TQM5200.h | 2 +- include/configs/jupiter.h | 2 +- include/configs/motionpro.h | 2 +- 9 files changed, 55 insertions(+), 51 deletions(-) diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index c027f6f..07ba245 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -28,10 +28,7 @@ #include #include #include - -#if defined(CONFIG_OF_FLAT_TREE) -#include -#endif +#include #if defined(CONFIG_LITE5200B) #include "mt46v32m16.h" @@ -386,7 +383,7 @@ void ide_set_reset (int idereset) } #endif -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c index b227487..efdc333 100644 --- a/board/jupiter/jupiter.c +++ b/board/jupiter/jupiter.c @@ -28,11 +28,7 @@ #include #include #include - -#if defined(CONFIG_OF_FLAT_TREE) -#include -#endif - +#include #define SDRAM_DDR 0 #if 1 @@ -308,7 +304,7 @@ void ide_set_reset (int idereset) } #endif -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c index 6eb5fe9..f83998e 100644 --- a/board/motionpro/motionpro.c +++ b/board/motionpro/motionpro.c @@ -29,9 +29,7 @@ #include #include #include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#endif +#include #if defined(CONFIG_STATUS_LED) #include @@ -196,12 +194,12 @@ int checkboard(void) } -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); } -#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ #if defined(CONFIG_STATUS_LED) diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 51f4aeb..21f67aa 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -31,10 +31,7 @@ #include #include #include - -#if defined(CONFIG_OF_FLAT_TREE) -#include -#endif +#include #ifdef CONFIG_VIDEO_SM501 #include @@ -780,9 +777,9 @@ int board_get_height (void) #endif /* CONFIG_VIDEO_SM501 */ -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); } -#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index 1eac2bb..7f16b92 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -29,10 +29,12 @@ #include #include #include +#include #include -#if defined(CONFIG_OF_FLAT_TREE) -#include +#if defined(CONFIG_OF_LIBFDT) +#include +#include #endif DECLARE_GLOBAL_DATA_PTR; @@ -111,29 +113,43 @@ unsigned long get_tbclk (void) /* ------------------------------------------------------------------------- */ -#ifdef CONFIG_OF_FLAT_TREE -void -ft_cpu_setup(void *blob, bd_t *bd) +#ifdef CONFIG_OF_LIBFDT +static void do_fixup(void *fdt, const char *node, const char *prop, + const void *val, int len, int create) { - u32 *p; - int len; - - /* Core XLB bus frequency */ - p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); - if (p != NULL) - *p = cpu_to_be32(bd->bi_busfreq); - - /* SOC peripherals use the IPB bus frequency */ - p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len); - if (p != NULL) - *p = cpu_to_be32(bd->bi_ipbfreq); - - p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len); - if (p != NULL) - memcpy(p, bd->bi_enetaddr, 6); - - p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/local-mac-address", &len); - if (p != NULL) - memcpy(p, bd->bi_enetaddr, 6); +#if defined(DEBUG) + int i; + debug("Updating property '%s/%s' = ", node, prop); + for (i = 0; i < len; i++) + debug(" %.2x", *(u8*)(val+i)); + debug("\n"); +#endif + int rc = fdt_find_and_setprop(fdt, node, prop, val, len, create); + if (rc) + printf("Unable to update property %s:%s, err=%s\n", + node, prop, fdt_strerror(rc)); +} + +static void do_fixup_u32(void *fdt, const char *node, const char *prop, + u32 val, int create) +{ + val = cpu_to_fdt32(val); + do_fixup(fdt, node, prop, &val, sizeof(val), create); +} + +void ft_cpu_setup(void *blob, bd_t *bd) +{ + int div = in_8((void*)CFG_MBAR + 0x204) & 0x0020 ? 8 : 4; + char * cpu_path = "/cpus/" OF_CPU; + char * eth_path = "/" OF_SOC "/ethernet@3000"; + + do_fixup_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1); + do_fixup_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1); + do_fixup_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1); + do_fixup_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipbfreq, 1); + do_fixup_u32(blob, "/" OF_SOC, "system-frequency", + bd->bi_busfreq*div, 1); + do_fixup(blob, eth_path, "mac-address", bd->bi_enetaddr, 6, 0); + do_fixup(blob, eth_path, "local-mac-address", bd->bi_enetaddr, 6, 0); } #endif diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index bdd92ba..4c16d22 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -178,7 +178,7 @@ #endif /* CONFIG_MPC5200 */ /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index c08173b..e0c9d81 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -701,7 +701,7 @@ * Open firmware flat tree support *----------------------------------------------------------------------- */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 4070ab9..b7100e9 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -145,7 +145,7 @@ #if 0 /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 82827c6..9a21632 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -417,7 +417,7 @@ extern void __led_set(led_id_t id, int state); #define CFG_RESET_ADDRESS 0xfff00100 /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" -- cgit v1.1 From e79021223bc339df655e360645a52c457a74b067 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 6 Sep 2007 09:47:40 -0600 Subject: bootm/fdt: Only process the fdt if an fdt address was provided Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style kernels using the board info structure (instead of passing a device tree) This change allows the old style booting to be used if the fdt argument was not passed to 'bootm'. Signed-off-by: Grant Likely Acked-by: Kim Phillips --- common/cmd_bootm.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index bcb927f..919188f 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -962,29 +962,31 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, * Add the chosen node if it doesn't exist, add the env and bd_t * if the user wants it (the logic is in the subroutines). */ - if (fdt_chosen(of_flat_tree, initrd_start, initrd_end, 0) < 0) { - puts ("ERROR: /chosen node create failed - " - "must RESET the board to recover.\n"); - do_reset (cmdtp, flag, argc, argv); - } + if (of_flat_tree) { + if (fdt_chosen(of_flat_tree, initrd_start, initrd_end, 0) < 0) { + puts ("ERROR: /chosen node create failed - " + "must RESET the board to recover.\n"); + do_reset (cmdtp, flag, argc, argv); + } #ifdef CONFIG_OF_HAS_UBOOT_ENV - if (fdt_env(of_flat_tree) < 0) { - puts ("ERROR: /u-boot-env node create failed - " - "must RESET the board to recover.\n"); - do_reset (cmdtp, flag, argc, argv); - } + if (fdt_env(of_flat_tree) < 0) { + puts ("ERROR: /u-boot-env node create failed - " + "must RESET the board to recover.\n"); + do_reset (cmdtp, flag, argc, argv); + } #endif #ifdef CONFIG_OF_HAS_BD_T - if (fdt_bd_t(of_flat_tree) < 0) { - puts ("ERROR: /bd_t node create failed - " - "must RESET the board to recover.\n"); - do_reset (cmdtp, flag, argc, argv); - } + if (fdt_bd_t(of_flat_tree) < 0) { + puts ("ERROR: /bd_t node create failed - " + "must RESET the board to recover.\n"); + do_reset (cmdtp, flag, argc, argv); + } #endif #ifdef CONFIG_OF_BOARD_SETUP - /* Call the board-specific fixup routine */ - ft_board_setup(of_flat_tree, gd->bd); + /* Call the board-specific fixup routine */ + ft_board_setup(of_flat_tree, gd->bd); #endif + } #endif /* CONFIG_OF_LIBFDT */ #if defined(CONFIG_OF_FLAT_TREE) #ifdef CFG_BOOTMAPSZ -- cgit v1.1 From 041a2554ad619e80dce520c1a33210affcb6a3f2 Mon Sep 17 00:00:00 2001 From: Gary Jennejohn Date: Fri, 31 Aug 2007 14:29:04 +0200 Subject: Add support for Sil680 IDE controller. o add drivers/sil680.c to support the Sil680 IDE-controller. o drivers/Makefile: add sil680.o. Signed-off-by: Gary Jennejohn --- drivers/Makefile | 2 +- drivers/sil680.c | 110 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 111 insertions(+), 1 deletion(-) create mode 100644 drivers/sil680.c diff --git a/drivers/Makefile b/drivers/Makefile index 3ee6312..6bf05cc 100755 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -43,7 +43,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o atmel_usart.o \ sed13806.o sed156x.o \ serial.o serial_max3100.o \ serial_pl010.o serial_pl011.o serial_xuartlite.o \ - sl811_usb.o sm501.o smc91111.o smiLynxEM.o \ + sil680.o sl811_usb.o sm501.o smc91111.o smiLynxEM.o \ status_led.o sym53c8xx.o systemace.o ahci.o \ ti_pci1410a.o tigon3.o tsec.o \ tsi108_eth.o tsi108_i2c.o tsi108_pci.o \ diff --git a/drivers/sil680.c b/drivers/sil680.c new file mode 100644 index 0000000..a6143df --- /dev/null +++ b/drivers/sil680.c @@ -0,0 +1,110 @@ +/* + * (C) Copyright 2007 + * Gary Jennejohn, DENX Software Engineering, garyj@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +/* sil680.c - ide support functions for the Sil0680A controller */ + +/* + * The following parameters must be defined in the configuration file + * of the target board: + * + * #define CFG_IDE_SIL680 + * + * #define CONFIG_PCI_PNP + * NOTE it may also be necessary to define this if the default of 8 is + * incorrect for the target board (e.g. the sequoia board requires 0). + * #define CFG_PCI_CACHE_LINE_SIZE 0 + * + * #define CONFIG_CMD_IDE + * #undef CONFIG_IDE_8xx_DIRECT + * #undef CONFIG_IDE_LED + * #undef CONFIG_IDE_RESET + * #define CONFIG_IDE_PREINIT + * #define CFG_IDE_MAXBUS 2 - modify to suit + * #define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) - modify to suit + * #define CFG_ATA_BASE_ADDR 0 + * #define CFG_ATA_IDE0_OFFSET 0 + * #define CFG_ATA_IDE1_OFFSET 0 + * #define CFG_ATA_DATA_OFFSET 0 + * #define CFG_ATA_REG_OFFSET 0 + * #define CFG_ATA_ALT_OFFSET 0x0004 + * + * The mapping for PCI IO-space. + * NOTE this is the value for the sequoia board. Modify to suit. + * #define CFG_PCI0_IO_SPACE 0xE8000000 + */ + +#include +#if defined(CFG_IDE_SIL680) +#include +#include +#include + +extern ulong ide_bus_offset[CFG_IDE_MAXBUS]; + +int ide_preinit (void) +{ + int status; + pci_dev_t devbusfn; + int l; + + status = 1; + for (l = 0; l < CFG_IDE_MAXBUS; l++) { + ide_bus_offset[l] = -ATA_STATUS; + } + devbusfn = pci_find_device (0x1095, 0x0680, 0); + if (devbusfn != -1) { + status = 0; + + pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, + (u32 *) &ide_bus_offset[0]); + ide_bus_offset[0] &= 0xfffffff8; + ide_bus_offset[0] += CFG_PCI0_IO_SPACE; + pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2, + (u32 *) &ide_bus_offset[1]); + ide_bus_offset[1] &= 0xfffffff8; + ide_bus_offset[1] += CFG_PCI0_IO_SPACE; + /* init various things - taken from the Linux driver */ + /* set PIO mode */ + pci_write_config_byte(devbusfn, 0x80, 0x00); + pci_write_config_byte(devbusfn, 0x84, 0x00); + /* IDE0 */ + pci_write_config_byte(devbusfn, 0xA1, 0x02); + pci_write_config_word(devbusfn, 0xA2, 0x328A); + pci_write_config_dword(devbusfn, 0xA4, 0x62DD62DD); + pci_write_config_dword(devbusfn, 0xA8, 0x43924392); + pci_write_config_dword(devbusfn, 0xAC, 0x40094009); + /* IDE1 */ + pci_write_config_byte(devbusfn, 0xB1, 0x02); + pci_write_config_word(devbusfn, 0xB2, 0x328A); + pci_write_config_dword(devbusfn, 0xB4, 0x62DD62DD); + pci_write_config_dword(devbusfn, 0xB8, 0x43924392); + pci_write_config_dword(devbusfn, 0xBC, 0x40094009); + } + return (status); +} + +void ide_set_reset (int flag) { + return; +} + +#endif /* CFG_IDE_SIL680 */ -- cgit v1.1 From 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Tue, 4 Sep 2007 17:31:22 +0200 Subject: Fix do_bootm_linux() so that multi-file images with FDT blob boot. Fix incorrect blob address calculation in do_bootm_linux() that prevents booting the kernel from a multi-file image (kernel + initrd + blob). Also, make minor updates to the U-Boot's output and to the coding style. Signed-off-by: Bartlomiej Sieka --- common/cmd_bootm.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 919188f..9f5e0b4 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -817,27 +817,32 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int i; /* skip kernel length, initrd length, and terminator */ - of_data = (ulong)(&len_ptr[3]); + of_flat_tree = (char *)(&len_ptr[3]); /* skip any additional image length fields */ for (i=2; len_ptr[i]; ++i) - of_data += 4; + of_flat_tree += 4; /* add kernel length, and align */ - of_data += ntohl(len_ptr[0]); + of_flat_tree += ntohl(len_ptr[0]); if (tail) { - of_data += 4 - tail; + of_flat_tree += 4 - tail; } /* add initrd length, and align */ tail = ntohl(len_ptr[1]) % 4; - of_data += ntohl(len_ptr[1]); + of_flat_tree += ntohl(len_ptr[1]); if (tail) { - of_data += 4 - tail; + of_flat_tree += 4 - tail; } + /* move the blob if it is in flash (set of_data to !null) */ + if (addr2info ((ulong)of_flat_tree) != NULL) + of_data = (ulong)of_flat_tree; + + #if defined(CONFIG_OF_FLAT_TREE) - if (*((ulong *)(of_flat_tree + sizeof(image_header_t))) != OF_DT_HEADER) { + if (*((ulong *)(of_flat_tree)) != OF_DT_HEADER) { #else - if (fdt_check_header(of_flat_tree + sizeof(image_header_t)) != 0) { + if (fdt_check_header (of_flat_tree) != 0) { #endif puts ("ERROR: image is not a fdt - " "must RESET the board to recover.\n"); @@ -845,9 +850,11 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, } #if defined(CONFIG_OF_FLAT_TREE) - if (((struct boot_param_header *)of_data)->totalsize != ntohl(len_ptr[2])) { + if (((struct boot_param_header *)of_flat_tree)->totalsize != + ntohl (len_ptr[2])) { #else - if (be32_to_cpu(fdt_totalsize(of_data)) != ntohl(len_ptr[2])) { + if (be32_to_cpu (fdt_totalsize (of_flat_tree)) != + ntohl(len_ptr[2])) { #endif puts ("ERROR: fdt size != image size - " "must RESET the board to recover.\n"); @@ -957,6 +964,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, "must RESET the board to recover.\n"); do_reset (cmdtp, flag, argc, argv); } + puts ("OK\n"); } /* * Add the chosen node if it doesn't exist, add the env and bd_t @@ -1013,6 +1021,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, printf (" Loading Device Tree to %08lx, end %08lx ... ", of_start, of_start + of_len - 1); memmove ((void *)of_start, (void *)of_data, of_len); + puts ("OK\n"); } /* * Create the /chosen node and modify the blob with board specific -- cgit v1.1 From 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5 Mon Sep 17 00:00:00 2001 From: Shinya Kuribayashi Date: Fri, 31 Aug 2007 14:41:45 +0900 Subject: [MIPS] Update asm string header This patches contains several bugfixes and cleanups in the latest upstream: - Don't include linux/config.h - Remove buggy inline version of memscan. - Merge with Linux 2.6.11-rc3. - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4. - Goodbye mips64. 31704 lines of code bite the dust. - Replace extern inline with static inline. - Fix return value of strncpy. - Remove a bunch more "$1" clobbers. Signed-off-by: Shinya Kuribayashi --- include/asm-mips/string.h | 68 +++++++++++++++++++---------------------------- 1 file changed, 27 insertions(+), 41 deletions(-) diff --git a/include/asm-mips/string.h b/include/asm-mips/string.h index 463a111..3f7c55e 100644 --- a/include/asm-mips/string.h +++ b/include/asm-mips/string.h @@ -1,18 +1,26 @@ -/* $Id: string.h,v 1.13 2000/02/19 14:12:14 harald Exp $ - * +/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 1994, 1995, 1996, 1997, 1998 by Ralf Baechle + * Copyright (c) 1994, 95, 96, 97, 98, 2000, 01 Ralf Baechle + * Copyright (c) 2000 by Silicon Graphics, Inc. + * Copyright (c) 2001 MIPS Technologies, Inc. */ -#ifndef __ASM_MIPS_STRING_H -#define __ASM_MIPS_STRING_H +#ifndef _ASM_STRING_H +#define _ASM_STRING_H + -#include +/* + * Most of the inline functions are rather naive implementations so I just + * didn't bother updating them for 64-bit ... + */ +#ifdef CONFIG_32BIT + +#ifndef IN_STRING_C #define __HAVE_ARCH_STRCPY -extern __inline__ char *strcpy(char *__dest, __const__ char *__src) +static __inline__ char *strcpy(char *__dest, __const__ char *__src) { char *__xdest = __dest; @@ -28,13 +36,13 @@ extern __inline__ char *strcpy(char *__dest, __const__ char *__src) ".set\treorder" : "=r" (__dest), "=r" (__src) : "0" (__dest), "1" (__src) - : "$1","memory"); + : "memory"); return __xdest; } #define __HAVE_ARCH_STRNCPY -extern __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n) +static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n) { char *__xdest = __dest; @@ -56,13 +64,13 @@ extern __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n) ".set\treorder" : "=r" (__dest), "=r" (__src), "=r" (__n) : "0" (__dest), "1" (__src), "2" (__n) - : "$1","memory"); + : "memory"); - return __dest; + return __xdest; } #define __HAVE_ARCH_STRCMP -extern __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct) +static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct) { int __res; @@ -84,14 +92,15 @@ extern __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct) "3:\t.set\tat\n\t" ".set\treorder" : "=r" (__cs), "=r" (__ct), "=r" (__res) - : "0" (__cs), "1" (__ct) - : "$1"); + : "0" (__cs), "1" (__ct)); return __res; } +#endif /* !defined(IN_STRING_C) */ + #define __HAVE_ARCH_STRNCMP -extern __inline__ int +static __inline__ int strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count) { int __res; @@ -116,11 +125,11 @@ strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count) ".set\tat\n\t" ".set\treorder" : "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res) - : "0" (__cs), "1" (__ct), "2" (__count) - : "$1"); + : "0" (__cs), "1" (__ct), "2" (__count)); return __res; } +#endif /* CONFIG_32BIT */ #undef __HAVE_ARCH_MEMSET extern void *memset(void *__s, int __c, size_t __count); @@ -131,27 +140,4 @@ extern void *memcpy(void *__to, __const__ void *__from, size_t __n); #undef __HAVE_ARCH_MEMMOVE extern void *memmove(void *__dest, __const__ void *__src, size_t __n); -/* Don't build bcopy at all ... */ -#define __HAVE_ARCH_BCOPY - -#define __HAVE_ARCH_MEMSCAN -extern __inline__ void *memscan(void *__addr, int __c, size_t __size) -{ - char *__end = (char *)__addr + __size; - - __asm__(".set\tpush\n\t" - ".set\tnoat\n\t" - ".set\treorder\n\t" - "1:\tbeq\t%0,%1,2f\n\t" - "addiu\t%0,1\n\t" - "lb\t$1,-1(%0)\n\t" - "bne\t$1,%4,1b\n" - "2:\t.set\tpop" - : "=r" (__addr), "=r" (__end) - : "0" (__addr), "1" (__end), "r" (__c) - : "$1"); - - return __addr; -} - -#endif /* __ASM_MIPS_STRING_H */ +#endif /* _ASM_STRING_H */ -- cgit v1.1 From b4d8a55145442f136982634862341a3e02002bda Mon Sep 17 00:00:00 2001 From: Shinya Kuribayashi Date: Fri, 31 Aug 2007 14:41:51 +0900 Subject: [MIPS] Remove inline asm string functions Stop using inline string functions on MIPS as other ARCHs do so, since the optimized inline asm versions are not small. This change is triggered by a following MIPS build error: common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init': common/exports.c:32: undefined reference to `strcmp' make: *** [u-boot] Error 1 Signed-off-by: Shinya Kuribayashi --- include/asm-mips/string.h | 124 ++++------------------------------------------ 1 file changed, 10 insertions(+), 114 deletions(-) diff --git a/include/asm-mips/string.h b/include/asm-mips/string.h index 3f7c55e..c42ad82 100644 --- a/include/asm-mips/string.h +++ b/include/asm-mips/string.h @@ -10,126 +10,22 @@ #ifndef _ASM_STRING_H #define _ASM_STRING_H - /* - * Most of the inline functions are rather naive implementations so I just - * didn't bother updating them for 64-bit ... + * We don't do inline string functions, since the + * optimised inline asm versions are not small. */ -#ifdef CONFIG_32BIT - -#ifndef IN_STRING_C - -#define __HAVE_ARCH_STRCPY -static __inline__ char *strcpy(char *__dest, __const__ char *__src) -{ - char *__xdest = __dest; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t$1,(%1)\n\t" - "addiu\t%1,1\n\t" - "sb\t$1,(%0)\n\t" - "bnez\t$1,1b\n\t" - "addiu\t%0,1\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__dest), "=r" (__src) - : "0" (__dest), "1" (__src) - : "memory"); - - return __xdest; -} - -#define __HAVE_ARCH_STRNCPY -static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n) -{ - char *__xdest = __dest; - - if (__n == 0) - return __xdest; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t$1,(%1)\n\t" - "subu\t%2,1\n\t" - "sb\t$1,(%0)\n\t" - "beqz\t$1,2f\n\t" - "addiu\t%0,1\n\t" - "bnez\t%2,1b\n\t" - "addiu\t%1,1\n" - "2:\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__dest), "=r" (__src), "=r" (__n) - : "0" (__dest), "1" (__src), "2" (__n) - : "memory"); - - return __xdest; -} - -#define __HAVE_ARCH_STRCMP -static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct) -{ - int __res; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n\t" - "lbu\t%2,(%0)\n" - "1:\tlbu\t$1,(%1)\n\t" - "addiu\t%0,1\n\t" - "bne\t$1,%2,2f\n\t" - "addiu\t%1,1\n\t" - "bnez\t%2,1b\n\t" - "lbu\t%2,(%0)\n\t" -#if defined(CONFIG_CPU_R3000) - "nop\n\t" -#endif - "move\t%2,$1\n" - "2:\tsubu\t%2,$1\n" - "3:\t.set\tat\n\t" - ".set\treorder" - : "=r" (__cs), "=r" (__ct), "=r" (__res) - : "0" (__cs), "1" (__ct)); - - return __res; -} -#endif /* !defined(IN_STRING_C) */ +#undef __HAVE_ARCH_STRCPY +extern char *strcpy(char *__dest, __const__ char *__src); -#define __HAVE_ARCH_STRNCMP -static __inline__ int -strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count) -{ - int __res; +#undef __HAVE_ARCH_STRNCPY +extern char *strncpy(char *__dest, __const__ char *__src, size_t __n); - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t%3,(%0)\n\t" - "beqz\t%2,2f\n\t" - "lbu\t$1,(%1)\n\t" - "subu\t%2,1\n\t" - "bne\t$1,%3,3f\n\t" - "addiu\t%0,1\n\t" - "bnez\t%3,1b\n\t" - "addiu\t%1,1\n" - "2:\n\t" -#if defined(CONFIG_CPU_R3000) - "nop\n\t" -#endif - "move\t%3,$1\n" - "3:\tsubu\t%3,$1\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res) - : "0" (__cs), "1" (__ct), "2" (__count)); +#undef __HAVE_ARCH_STRCMP +extern int strcmp(__const__ char *__cs, __const__ char *__ct); - return __res; -} -#endif /* CONFIG_32BIT */ +#undef __HAVE_ARCH_STRNCMP +extern int strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count); #undef __HAVE_ARCH_MEMSET extern void *memset(void *__s, int __c, size_t __count); -- cgit v1.1 From 1d2ca446e1a731df420206d04fe278c27ea6b8e8 Mon Sep 17 00:00:00 2001 From: Jason Jin Date: Thu, 30 Aug 2007 18:19:05 +0800 Subject: Add BUILD_DIR support for bios emulator. Signed-off-by: Jason Jin --- drivers/bios_emulator/Makefile | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/bios_emulator/Makefile b/drivers/bios_emulator/Makefile index 586e83b..90c64da 100644 --- a/drivers/bios_emulator/Makefile +++ b/drivers/bios_emulator/Makefile @@ -2,9 +2,11 @@ include $(TOPDIR)/config.mk LIB := $(obj)libatibiosemu.a -X86DIR = ./x86emu +X86DIR = x86emu -OBJS = atibios.o biosemu.o besys.o bios.o \ +$(shell mkdir -p $(obj)$(X86DIR)) + +COBJS = atibios.o biosemu.o besys.o bios.o \ $(X86DIR)/decode.o \ $(X86DIR)/ops2.o \ $(X86DIR)/ops.o \ @@ -12,19 +14,24 @@ OBJS = atibios.o biosemu.o besys.o bios.o \ $(X86DIR)/sys.o \ $(X86DIR)/debug.o -CFLAGS += -I. -I./include -I$(X86DIR) -I$(TOPDIR)/include \ +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +EXTRA_CFLAGS += -I. -I./include -I$(TOPDIR)/include \ -D__PPC__ -D__BIG_ENDIAN__ +CFLAGS += $(EXTRA_CFLAGS) +HOST_CFLAGS += $(EXTRA_CFLAGS) + all: $(LIB) -$(LIB): $(OBJS) - $(AR) crv $@ $(OBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### -.depend: Makefile $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ +include $(SRCTREE)/rules.mk -sinclude .depend +sinclude $(obj).depend ######################################################################### -- cgit v1.1 From 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e Mon Sep 17 00:00:00 2001 From: stefano babic Date: Thu, 30 Aug 2007 22:48:47 +0200 Subject: PXA270: fix compile issue (invalid lvalue) Code is broken for PXA270 due to "invalid lvalue in assignment". This patch fix it in pxa-regs.h Signed-off-by: Stefano Babic --- include/asm-arm/arch-pxa/pxa-regs.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index e8cb299..9b4da3a 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1288,15 +1288,15 @@ typedef void (*ExcpHndlr) (void) ; #define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) #define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) -#define GPLR(x) ((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3) -#define GPDR(x) ((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3) -#define GPSR(x) ((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3) -#define GPCR(x) ((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3) -#define GRER(x) ((((x) & 0x7f) < 96) ? _GRER(x) : GRER3) -#define GFER(x) ((((x) & 0x7f) < 96) ? _GFER(x) : GFER3) -#define GEDR(x) ((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3) -#define GAFR(x) ((((x) & 0x7f) < 96) ? _GAFR(x) : \ - ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)) +#define GPLR(x) __REG2(0x40E00000 + (((x) & 0x7f) < 96) ? 0:0x100, ((x) & 0x60) >> 3) +#define GPDR(x) __REG2(0x40E0000C + (((x) & 0x7f) < 96) ? 0:0x100, ((x) & 0x60) >> 3) +#define GPSR(x) __REG2(0x40E00018 + (((x) & 0x7f) < 96) ? 0:0x100, ((x) & 0x60) >> 3) +#define GPCR(x) __REG2(0x40E00024 + (((x) & 0x7f) < 96) ? 0:0x100, ((x) & 0x60) >> 3) +#define GRER(x) __REG2(0x40E00030 + (((x) & 0x7f) < 96) ? 0:0x100, ((x) & 0x60) >> 3) +#define GFER(x) __REG2(0x40E0003C + (((x) & 0x7f) < 96) ? 0:0x100, ((x) & 0x60) >> 3) +#define GEDR(x) __REG2(0x40E00048 + (((x) & 0x7f) < 96) ? 0:0x100, ((x) & 0x60) >> 3) +#define GAFR(x) __REG2((((x) & 0x7f) < 96) ? 0x40E00054 : \ + ((((x) & 0x7f) < 112) ? 0x40E0006C : 0x40E00070),((x) & 0x60) >> 3) #else #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) -- cgit v1.1 From 80172c6181c912fbb34ea3ba0c22b232b419b47f Mon Sep 17 00:00:00 2001 From: stefano babic Date: Thu, 30 Aug 2007 22:57:04 +0200 Subject: PXA270: Add support for multiple serial ports. This patch adds support for multiple serial ports to the PXA target. FFUART, BTUART and STUART are supported. Signed-off-by: Stefano Babic --- common/serial.c | 13 ++- cpu/pxa/serial.c | 351 ++++++++++++++++++++++++++++++++++++++++++------------- include/serial.h | 4 + lib_arm/board.c | 4 + 4 files changed, 288 insertions(+), 84 deletions(-) diff --git a/common/serial.c b/common/serial.c index 13e9f30..dee1cc0 100644 --- a/common/serial.c +++ b/common/serial.c @@ -32,7 +32,7 @@ DECLARE_GLOBAL_DATA_PTR; static struct serial_device *serial_devices = NULL; static struct serial_device *serial_current = NULL; -#ifndef CONFIG_LWMON +#if !defined(CONFIG_LWMON) && !defined(CONFIG_PXA27X) struct serial_device *default_serial_console (void) { #if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2) @@ -65,7 +65,7 @@ struct serial_device *default_serial_console (void) } #endif -static int serial_register (struct serial_device *dev) +int serial_register (struct serial_device *dev) { dev->init += gd->reloc_off; dev->setbrg += gd->reloc_off; @@ -110,6 +110,15 @@ void serial_initialize (void) serial_register(&eserial4_device); #endif #endif /* CFG_NS16550_SERIAL */ +#if defined (CONFIG_FFUART) + serial_register(&serial_ffuart_device); +#endif +#if defined (CONFIG_BTUART) + serial_register(&serial_btuart_device); +#endif +#if defined (CONFIG_STUART) + serial_register(&serial_stuart_device); +#endif serial_assign (default_serial_console ()->name); } diff --git a/cpu/pxa/serial.c b/cpu/pxa/serial.c index cb3a478..51e7f65 100644 --- a/cpu/pxa/serial.c +++ b/cpu/pxa/serial.c @@ -30,11 +30,28 @@ #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; -void serial_setbrg (void) +#define FFUART 0 +#define BTUART 1 +#define STUART 2 + +#ifndef CONFIG_SERIAL_MULTI +#if defined (CONFIG_FFUART) +#define UART_INDEX FFUART +#elif defined (CONFIG_BTUART) +#define UART_INDEX BTUART +#elif defined (CONFIG_STUART) +#define UART_INDEX STUART +#else +#error "Bad: you didn't configure serial ..." +#endif +#endif + +void pxa_setbrg_dev (unsigned int uart_index) { unsigned int quot = 0; @@ -53,63 +70,68 @@ void serial_setbrg (void) else hang (); -#ifdef CONFIG_FFUART + switch (uart_index) { + case FFUART: #ifdef CONFIG_CPU_MONAHANS - CKENA |= CKENA_22_FFUART; + CKENA |= CKENA_22_FFUART; #else - CKEN |= CKEN6_FFUART; + CKEN |= CKEN6_FFUART; #endif /* CONFIG_CPU_MONAHANS */ - FFIER = 0; /* Disable for now */ - FFFCR = 0; /* No fifos enabled */ + FFIER = 0; /* Disable for now */ + FFFCR = 0; /* No fifos enabled */ - /* set baud rate */ - FFLCR = LCR_WLS0 | LCR_WLS1 | LCR_DLAB; - FFDLL = quot & 0xff; - FFDLH = quot >> 8; - FFLCR = LCR_WLS0 | LCR_WLS1; + /* set baud rate */ + FFLCR = LCR_WLS0 | LCR_WLS1 | LCR_DLAB; + FFDLL = quot & 0xff; + FFDLH = quot >> 8; + FFLCR = LCR_WLS0 | LCR_WLS1; - FFIER = IER_UUE; /* Enable FFUART */ + FFIER = IER_UUE; /* Enable FFUART */ + break; -#elif defined(CONFIG_BTUART) + case BTUART: #ifdef CONFIG_CPU_MONAHANS - CKENA |= CKENA_21_BTUART; + CKENA |= CKENA_21_BTUART; #else - CKEN |= CKEN7_BTUART; + CKEN |= CKEN7_BTUART; #endif /* CONFIG_CPU_MONAHANS */ - BTIER = 0; - BTFCR = 0; + BTIER = 0; + BTFCR = 0; - /* set baud rate */ - BTLCR = LCR_DLAB; - BTDLL = quot & 0xff; - BTDLH = quot >> 8; - BTLCR = LCR_WLS0 | LCR_WLS1; + /* set baud rate */ + BTLCR = LCR_DLAB; + BTDLL = quot & 0xff; + BTDLH = quot >> 8; + BTLCR = LCR_WLS0 | LCR_WLS1; - BTIER = IER_UUE; /* Enable BFUART */ + BTIER = IER_UUE; /* Enable BFUART */ -#elif defined(CONFIG_STUART) + break; + + case STUART: #ifdef CONFIG_CPU_MONAHANS - CKENA |= CKENA_23_STUART; + CKENA |= CKENA_23_STUART; #else - CKEN |= CKEN5_STUART; + CKEN |= CKEN5_STUART; #endif /* CONFIG_CPU_MONAHANS */ - STIER = 0; - STFCR = 0; + STIER = 0; + STFCR = 0; - /* set baud rate */ - STLCR = LCR_DLAB; - STDLL = quot & 0xff; - STDLH = quot >> 8; - STLCR = LCR_WLS0 | LCR_WLS1; + /* set baud rate */ + STLCR = LCR_DLAB; + STDLL = quot & 0xff; + STDLH = quot >> 8; + STLCR = LCR_WLS0 | LCR_WLS1; - STIER = IER_UUE; /* Enable STUART */ + STIER = IER_UUE; /* Enable STUART */ + break; -#else -#error "Bad: you didn't configure serial ..." -#endif + default: + hang(); + } } @@ -118,9 +140,9 @@ void serial_setbrg (void) * are always 8 data bits, no parity, 1 stop bit, no start bits. * */ -int serial_init (void) +int pxa_init_dev (unsigned int uart_index) { - serial_setbrg (); + pxa_setbrg_dev (uart_index); return (0); } @@ -129,26 +151,32 @@ int serial_init (void) /* * Output a single byte to the serial port. */ -void serial_putc (const char c) -{ -#ifdef CONFIG_FFUART - /* wait for room in the tx FIFO on FFUART */ - while ((FFLSR & LSR_TEMT) == 0) - WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ - FFTHR = c; -#elif defined(CONFIG_BTUART) - while ((BTLSR & LSR_TEMT ) == 0 ) - WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ - BTTHR = c; -#elif defined(CONFIG_STUART) - while ((STLSR & LSR_TEMT ) == 0 ) - WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ - STTHR = c; -#endif +void pxa_putc_dev (unsigned int uart_index,const char c) +{ + switch (uart_index) { + case FFUART: + /* wait for room in the tx FIFO on FFUART */ + while ((FFLSR & LSR_TEMT) == 0) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + FFTHR = c; + break; + + case BTUART: + while ((BTLSR & LSR_TEMT ) == 0 ) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + BTTHR = c; + break; + + case STUART: + while ((STLSR & LSR_TEMT ) == 0 ) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + STTHR = c; + break; + } /* If \n, also do \r */ if (c == '\n') - serial_putc ('\r'); + pxa_putc_dev (uart_index,'\r'); } /* @@ -156,15 +184,17 @@ void serial_putc (const char c) * otherwise. When the function is succesfull, the character read is * written into its argument c. */ -int serial_tstc (void) -{ -#ifdef CONFIG_FFUART - return FFLSR & LSR_DR; -#elif defined(CONFIG_BTUART) - return BTLSR & LSR_DR; -#elif defined(CONFIG_STUART) - return STLSR & LSR_DR; -#endif +int pxa_tstc_dev (unsigned int uart_index) +{ + switch (uart_index) { + case FFUART: + return FFLSR & LSR_DR; + case BTUART: + return BTLSR & LSR_DR; + case STUART: + return STLSR & LSR_DR; + } + return -1; } /* @@ -172,27 +202,184 @@ int serial_tstc (void) * otherwise. When the function is succesfull, the character read is * written into its argument c. */ -int serial_getc (void) -{ -#ifdef CONFIG_FFUART - while (!(FFLSR & LSR_DR)) - WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ - return (char) FFRBR & 0xff; -#elif defined(CONFIG_BTUART) - while (!(BTLSR & LSR_DR)) - WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ - return (char) BTRBR & 0xff; -#elif defined(CONFIG_STUART) - while (!(STLSR & LSR_DR)) - WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ - return (char) STRBR & 0xff; -#endif +int pxa_getc_dev (unsigned int uart_index) +{ + switch (uart_index) { + case FFUART: + while (!(FFLSR & LSR_DR)) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + return (char) FFRBR & 0xff; + + case BTUART: + while (!(BTLSR & LSR_DR)) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + return (char) BTRBR & 0xff; + case STUART: + while (!(STLSR & LSR_DR)) + WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + return (char) STRBR & 0xff; + } + return -1; } void -serial_puts (const char *s) +pxa_puts_dev (unsigned int uart_index,const char *s) { while (*s) { - serial_putc (*s++); + pxa_putc_dev (uart_index,*s++); } } + +#if defined (CONFIG_FFUART) +static int ffuart_init(void) +{ + return pxa_init_dev(FFUART); +} + +static void ffuart_setbrg(void) +{ + return pxa_setbrg_dev(FFUART); +} + +static void ffuart_putc(const char c) +{ + return pxa_putc_dev(FFUART,c); +} + +static void ffuart_puts(const char *s) +{ + return pxa_puts_dev(FFUART,s); +} + +static int ffuart_getc(void) +{ + return pxa_getc_dev(FFUART); +} + +static int ffuart_tstc(void) +{ + return pxa_tstc_dev(FFUART); +} + +struct serial_device serial_ffuart_device = +{ + "serial_ffuart", + "PXA", + ffuart_init, + ffuart_setbrg, + ffuart_getc, + ffuart_tstc, + ffuart_putc, + ffuart_puts, +}; +#endif + +#if defined (CONFIG_BTUART) +static int btuart_init(void) +{ + return pxa_init_dev(BTUART); +} + +static void btuart_setbrg(void) +{ + return pxa_setbrg_dev(BTUART); +} + +static void btuart_putc(const char c) +{ + return pxa_putc_dev(BTUART,c); +} + +static void btuart_puts(const char *s) +{ + return pxa_puts_dev(BTUART,s); +} + +static int btuart_getc(void) +{ + return pxa_getc_dev(BTUART); +} + +static int btuart_tstc(void) +{ + return pxa_tstc_dev(BTUART); +} + +struct serial_device serial_btuart_device = +{ + "serial_btuart", + "PXA", + btuart_init, + btuart_setbrg, + btuart_getc, + btuart_tstc, + btuart_putc, + btuart_puts, +}; +#endif + +#if defined (CONFIG_STUART) +static int stuart_init(void) +{ + return pxa_init_dev(STUART); +} + +static void stuart_setbrg(void) +{ + return pxa_setbrg_dev(STUART); +} + +static void stuart_putc(const char c) +{ + return pxa_putc_dev(STUART,c); +} + +static void stuart_puts(const char *s) +{ + return pxa_puts_dev(STUART,s); +} + +static int stuart_getc(void) +{ + return pxa_getc_dev(STUART); +} + +static int stuart_tstc(void) +{ + return pxa_tstc_dev(STUART); +} + +struct serial_device serial_stuart_device = +{ + "serial_stuart", + "PXA", + stuart_init, + stuart_setbrg, + stuart_getc, + stuart_tstc, + stuart_putc, + stuart_puts, +}; +#endif + + +#ifndef CONFIG_SERIAL_MULTI +inline int serial_init(void) { + return (pxa_init_dev(UART_INDEX)); +} +void serial_setbrg(void) { + pxa_setbrg_dev(UART_INDEX); +} +int serial_getc(void) { + return(pxa_getc_dev(UART_INDEX)); +} +int serial_tstc(void) { + return(pxa_tstc_dev(UART_INDEX)); +} +void serial_putc(const char c) { + pxa_putc_dev(UART_INDEX,c); +} +void serial_puts(const char *s) { + pxa_puts_dev(UART_INDEX,s); +} +#endif /* CONFIG_SERIAL_MULTI */ diff --git a/include/serial.h b/include/serial.h index f7412fd..30bfde3 100644 --- a/include/serial.h +++ b/include/serial.h @@ -36,6 +36,10 @@ extern struct serial_device eserial4_device; #endif +extern struct serial_device serial_ffuart_device; +extern struct serial_device serial_btuart_device; +extern struct serial_device serial_stuart_device; + extern void serial_initialize(void); extern void serial_devices_init(void); extern int serial_assign(char * name); diff --git a/lib_arm/board.c b/lib_arm/board.c index d37e5da..d28afc5 100644 --- a/lib_arm/board.c +++ b/lib_arm/board.c @@ -314,6 +314,10 @@ void start_armboot (void) drv_vfd_init(); #endif /* CONFIG_VFD */ +#ifdef CONFIG_SERIAL_MULTI + serial_initialize(); +#endif + /* IP Address */ gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); -- cgit v1.1 From 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3 Mon Sep 17 00:00:00 2001 From: stefano babic Date: Thu, 30 Aug 2007 23:01:49 +0200 Subject: PXA270: Added support for TrizepsIV board. This patch add support for the Trizeps IV module (520Mhz). Signed-off-by: Stefano Babic --- Makefile | 3 + board/trizepsiv/Makefile | 51 ++++ board/trizepsiv/config.mk | 3 + board/trizepsiv/conxs.c | 146 ++++++++++++ board/trizepsiv/eeprom.c | 85 +++++++ board/trizepsiv/lowlevel_init.S | 503 ++++++++++++++++++++++++++++++++++++++++ board/trizepsiv/pxavoltage.S | 31 +++ board/trizepsiv/u-boot.lds | 56 +++++ drivers/dm9000x.c | 16 +- include/configs/trizepsiv.h | 325 ++++++++++++++++++++++++++ 10 files changed, 1217 insertions(+), 2 deletions(-) create mode 100644 board/trizepsiv/Makefile create mode 100644 board/trizepsiv/config.mk create mode 100644 board/trizepsiv/conxs.c create mode 100644 board/trizepsiv/eeprom.c create mode 100644 board/trizepsiv/lowlevel_init.S create mode 100644 board/trizepsiv/pxavoltage.S create mode 100644 board/trizepsiv/u-boot.lds create mode 100644 include/configs/trizepsiv.h diff --git a/Makefile b/Makefile index 0477cd3..0371d46 100644 --- a/Makefile +++ b/Makefile @@ -2334,6 +2334,9 @@ scpu_config: unconfig pxa255_idp_config: unconfig @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp +trizepsiv_config : unconfig + @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv + wepep250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa wepep250 diff --git a/board/trizepsiv/Makefile b/board/trizepsiv/Makefile new file mode 100644 index 0000000..115e17d --- /dev/null +++ b/board/trizepsiv/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := conxs.o eeprom.o +SOBJS := lowlevel_init.o pxavoltage.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/trizepsiv/config.mk b/board/trizepsiv/config.mk new file mode 100644 index 0000000..4486f6b --- /dev/null +++ b/board/trizepsiv/config.mk @@ -0,0 +1,3 @@ +TEXT_BASE =0xa1f00000 +# 0xa1700000 +#TEXT_BASE = 0 diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c new file mode 100644 index 0000000..7c6c855 --- /dev/null +++ b/board/trizepsiv/conxs.c @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Gmbh, sbabic@denx.de + * + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define RH_A_PSM (1 << 8) /* power switching mode */ +#define RH_A_NPS (1 << 9) /* no power switching */ + +extern struct serial_device serial_ffuart_device; +extern struct serial_device serial_btuart_device; +extern struct serial_device serial_stuart_device; + +/* ------------------------------------------------------------------------- */ + +/* + * Miscelaneous platform dependent initialisations + */ + +void usb_board_init(void) +{ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); + + UHCHR |= UHCHR_FSBIR; + + while (UHCHR & UHCHR_FSBIR); + + UHCHR &= ~UHCHR_SSE; + UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE); + + /* Clear any OTG Pin Hold */ + if (PSSR & PSSR_OTGPH) + PSSR |= PSSR_OTGPH; + + UHCRHDA &= ~(RH_A_NPS); + UHCRHDA |= RH_A_PSM; + + /* Set port power control mask bits, only 3 ports. */ + UHCRHDB |= (0x7<<17); +} + +void usb_board_init_fail(void) +{ + return; +} + +void usb_board_stop(void) +{ + UHCHR |= UHCHR_FHR; + udelay(11); + UHCHR &= ~UHCHR_FHR; + + UHCCOMS |= 1; + udelay(10); + + CKEN &= ~CKEN10_USBHOST; + + puts("Called USB STOP\n"); + return; +} + +int board_init (void) +{ + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of ConXS Board */ + gd->bd->bi_arch_number = 776; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa000003c; + + return 0; +} + +int board_late_init(void) +{ +#if defined(CONFIG_SERIAL_MULTI) + char *console=getenv("boot_console"); + + if ((strcmp(console,"serial_btuart") == 0) || + (strcmp(console,"serial_stuart") == 0) || + (strcmp(console,"serial_ffuart") == 0)) { + setenv("stdout",console); + setenv("stdin", console); + setenv("stderr",console); + } else { + setenv("stdout", "serial"); + setenv("stdin", "serial"); + setenv("stderr", "serial"); + } +#endif + return 0; +} + +struct serial_device *default_serial_console (void) +{ + return &serial_ffuart_device; +} + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; + gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; + + return 0; +} diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c new file mode 100644 index 0000000..3d3bc00 --- /dev/null +++ b/board/trizepsiv/eeprom.c @@ -0,0 +1,85 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +static unsigned char srom[128]; +extern u16 read_srom_word(int); +extern void write_srom_word(int offset, u16 val); + +static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { + int i; + + for (i=0; i < 0x40; i++) { + if (!(i % 0x10)) + printf("\n%08lx:", i); + printf(" %04x", read_srom_word(i)); + } + printf ("\n"); + return (0); +} + +static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { + int offset,value; + + if (argc < 4) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + offset=simple_strtoul(argv[2],NULL,16); + value=simple_strtoul(argv[3],NULL,16); + if (offset > 0x40) { + printf("Wrong offset : 0x%x\n",offset); + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + write_srom_word(offset, value); + return (0); +} + +int do_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { + if (argc < 2) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (strcmp (argv[1],"read") == 0) { + return (do_read_dm9000_eeprom(cmdtp,flag,argc,argv)); + } else if (strcmp (argv[1],"write") == 0) { + return (do_write_dm9000_eeprom(cmdtp,flag,argc,argv)); + } else { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } +} + +U_BOOT_CMD( + dm9000ee,4,1,do_dm9000_eeprom, + "dm9000ee- Read/Write eeprom connected to Ethernet Controller\n", + "\ndm9000ee write \n" + "\tdm9000ee read \n" + "\tword:\t\t00-02 : MAC Address\n" + "\t\t\t03-07 : DM9000 Configuration\n" + "\t\t\t08-63 : User data\n"); diff --git a/board/trizepsiv/lowlevel_init.S b/board/trizepsiv/lowlevel_init.S new file mode 100644 index 0000000..d886938 --- /dev/null +++ b/board/trizepsiv/lowlevel_init.S @@ -0,0 +1,503 @@ +/* + * This was originally from the Lubbock u-boot port. + * + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/lowlevel_init.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +/* + * Memory setup + */ + +.globl lowlevel_init +lowlevel_init: + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPSR3 + ldr r1, =CFG_GPSR3_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GPCR3 + ldr r1, =CFG_GPCR3_VAL + str r1, [r0] + + ldr r0, =GRER0 + ldr r1, =CFG_GRER0_VAL + str r1, [r0] + + ldr r0, =GRER1 + ldr r1, =CFG_GRER1_VAL + str r1, [r0] + + ldr r0, =GRER2 + ldr r1, =CFG_GRER2_VAL + str r1, [r0] + + ldr r0, =GRER3 + ldr r1, =CFG_GRER3_VAL + str r1, [r0] + + ldr r0, =GFER0 + ldr r1, =CFG_GFER0_VAL + str r1, [r0] + + ldr r0, =GFER1 + ldr r1, =CFG_GFER1_VAL + str r1, [r0] + + ldr r0, =GFER2 + ldr r1, =CFG_GFER2_VAL + str r1, [r0] + + ldr r0, =GFER3 + ldr r1, =CFG_GFER3_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GPDR3 + ldr r1, =CFG_GPDR3_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + ldr r0, =GAFR3_L + ldr r1, =CFG_GAFR3_L_VAL + str r1, [r0] + + ldr r0, =GAFR3_U + ldr r1, =CFG_GAFR3_U_VAL + str r1, [r0] + + ldr r0, =PSSR /* enable GPIO pins */ + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1, =MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* that data latches */ + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + ldr r2, [r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + ldr r2, [r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + ldr r2, [r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + ldr r2, [r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + ldr r2, [r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + ldr r2, [r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + ldr r2, [r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + ldr r2, =CFG_FLYCNFG_VAL + str r2, [r1, #FLYCNFG_OFFSET] + str r2, [r1, #FLYCNFG_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + /* Before accessing MDREFR we need a valid DRI field, so we set */ + /* this to power on defaults + DRI field. */ + + ldr r4, [r1, #MDREFR_OFFSET] + ldr r2, =0xFFF + bic r4, r4, r2 + + ldr r3, =CFG_MDREFR_VAL + and r3, r3, r2 + + orr r4, r4, r3 + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + + orr r4, r4, #MDREFR_K0RUN + orr r4, r4, #MDREFR_K0DB4 + orr r4, r4, #MDREFR_K0FREE + orr r4, r4, #MDREFR_K0DB2 + orr r4, r4, #MDREFR_K1DB2 + bic r4, r4, #MDREFR_K1FREE + bic r4, r4, #MDREFR_K2FREE + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + /* Note: preserve the mdrefr value in r4 */ + + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + ldr r2, =CFG_SXCNFG_VAL + str r2, [r1, #SXCNFG_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + bic r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE) + + orr r4, r4, #MDREFR_K1RUN + bic r4, r4, #MDREFR_K2DB2 + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + bic r4, r4, #MDREFR_SLFRSH + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + orr r4, r4, #MDREFR_E1PIN + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + nop + nop + + + /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ + /* configure but not enable each SDRAM partition pair. */ + + ldr r4, =CFG_MDCNFG_VAL + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) + + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + ldr r3, =CFG_DRAM_BASE + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* (MDCNFG:DEx set to 1). */ + + ldr r3, [r1, #MDCNFG_OFFSET] + mov r4, r3 + orr r3, r3, #MDCNFG_DE0 + str r3, [r1, #MDCNFG_OFFSET] + mov r0, r3 + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + /* enable APD */ + ldr r3, [r1, #MDREFR_OFFSET] + orr r3, r3, #MDREFR_APD + str r3, [r1, #MDREFR_OFFSET] + + /* We are finished with Intel's memory controller initialisation */ + + +setvoltage: + + mov r10, lr + bl initPXAvoltage /* In case the board is rebooting with a */ + mov lr, r10 /* low voltage raise it up to a good one. */ + +#if 1 + b initirqs +#endif + +wakeup: + /* Are we waking from sleep? */ + ldr r0, =RCSR + ldr r1, [r0] + and r1, r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) + str r1, [r0] + teq r1, #RCSR_SMR + + bne initirqs + + ldr r0, =PSSR + mov r1, #PSSR_PH + str r1, [r0] + + /* if so, resume at PSPR */ + ldr r0, =PSPR + ldr r1, [r0] + mov pc, r1 + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + + /* Turn Off on-chip peripheral clocks (except for memory) */ + /* for re-configuration. */ + ldr r1, =CKEN + ldr r2, =CFG_CKEN + str r2, [r1] + + /* ... and write the core clock config register */ + ldr r2, =CFG_CCCR + ldr r1, =CCCR + str r2, [r1] + + /* Turn on turbo mode */ + mrc p14, 0, r2, c6, c0, 0 + orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/ + mcr p14, 0, r2, c6, c0, 0 + + /* Re-write MDREFR */ + ldr r1, =MEMC_BASE + ldr r2, [r1, #MDREFR_OFFSET] + str r2, [r1, #MDREFR_OFFSET] +#ifdef RTC + /* enable the 32Khz oscillator for RTC and PowerManager */ + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#else +#error "RTC not defined" +#endif + + /* Interrupt init: Mask all interrupts */ + ldr r0, =ICMR /* enable no sources */ + mov r1, #0 + str r1, [r0] + /* FIXME */ + +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ +#endif + + /* ---------------------------------------------------------------- */ + /* End lowlevel_init */ + /* ---------------------------------------------------------------- */ + +endlowlevel_init: + + mov pc, lr diff --git a/board/trizepsiv/pxavoltage.S b/board/trizepsiv/pxavoltage.S new file mode 100644 index 0000000..5e41132 --- /dev/null +++ b/board/trizepsiv/pxavoltage.S @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Gmbh, sbabic@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + + + .global initPXAvoltage + +initPXAvoltage: + mov pc, lr + diff --git a/board/trizepsiv/u-boot.lds b/board/trizepsiv/u-boot.lds new file mode 100644 index 0000000..f010239 --- /dev/null +++ b/board/trizepsiv/u-boot.lds @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/drivers/dm9000x.c b/drivers/dm9000x.c index e0d531b..6131b5c 100644 --- a/drivers/dm9000x.c +++ b/drivers/dm9000x.c @@ -99,7 +99,7 @@ void eth_halt(void); static int dm9000_probe(void); static u16 phy_read(int); static void phy_write(int, u16); -static u16 read_srom_word(int); +u16 read_srom_word(int); static u8 DM9000_ior(int); static void DM9000_iow(int reg, u8 value); @@ -537,7 +537,7 @@ eth_rx(void) /* Read a word data from SROM */ -static u16 +u16 read_srom_word(int offset) { DM9000_iow(DM9000_EPAR, offset); @@ -547,6 +547,18 @@ read_srom_word(int offset) return (DM9000_ior(DM9000_EPDRL) + (DM9000_ior(DM9000_EPDRH) << 8)); } +void +write_srom_word(int offset, u16 val) +{ + DM9000_iow(DM9000_EPAR, offset); + DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff)); + DM9000_iow(DM9000_EPDRL, (val & 0xff)); + DM9000_iow(DM9000_EPCR, 0x12); + udelay(8000); + DM9000_iow(DM9000_EPCR, 0); +} + + /* Read a byte from I/O port */ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h new file mode 100644 index 0000000..84998d4 --- /dev/null +++ b/include/configs/trizepsiv.h @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Gmbh, sbabic@denx.de + * + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * Configuation settings for the LUBBOCK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ + +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ + +#define CONFIG_MMC 1 +#define BOARD_LATE_INIT 1 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define RTC + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_FFUART 1 /* we use FFUART on Conxs */ +#define CONFIG_BTUART 1 /* we use BTUART on Conxs */ +#define CONFIG_STUART 1 /* we use STUART on Conxs */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 38400 + +#define CONFIG_DOS_PARTITION 1 + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IMLS +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ + +#undef CONFIG_SHOW_BOOT_PROGRESS + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_SERVERIP 192.168.1.99 +#define CONFIG_BOOTCOMMAND "run boot_flash" +#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\ + " rw root=/dev/ram initrd=0xa0800000,5m" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "program_boot_mmc=" \ + "mw.b 0xa0010000 0xff 0x20000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 u-boot.bin; " \ + "then " \ + "protect off 0x0 0x1ffff; " \ + "erase 0x0 0x1ffff; " \ + "cp.b 0xa0010000 0x0 0x20000; " \ + "fi\0" \ + "program_uzImage_mmc=" \ + "mw.b 0xa0010000 0xff 0x180000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 uzImage; " \ + "then " \ + "protect off 0x40000 0x1bffff; " \ + "erase 0x40000 0x1bffff; " \ + "cp.b 0xa0010000 0x40000 0x180000; " \ + "fi\0" \ + "program_ramdisk_mmc=" \ + "mw.b 0xa0010000 0xff 0x500000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 ramdisk.gz; " \ + "then " \ + "protect off 0x1c0000 0x6bffff; " \ + "erase 0x1c0000 0x6bffff; " \ + "cp.b 0xa0010000 0x1c0000 0x500000; " \ + "fi\0" \ + "boot_mmc=" \ + "if mmcinit && " \ + "fatload mmc 0 0xa0030000 uzImage && " \ + "fatload mmc 0 0xa0800000 ramdisk.gz; " \ + "then " \ + "bootm 0xa0030000; " \ + "fi\0" \ + "boot_flash=" \ + "cp.b 0x1c0000 0xa0800000 0x500000; " \ + "bootm 0x40000\0" \ + +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +/* #define CONFIG_INITRD_TAG 1 */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_MMC_BASE 0xF0000000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/* + * GPIO settings + */ +#define CFG_GPSR0_VAL 0x00018000 +#define CFG_GPSR1_VAL 0x00000000 +#define CFG_GPSR2_VAL 0x400dc000 +#define CFG_GPSR3_VAL 0x00000000 +#define CFG_GPCR0_VAL 0x00000000 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +#define CFG_GPCR3_VAL 0x00000000 +#define CFG_GPDR0_VAL 0x00018000 +#define CFG_GPDR1_VAL 0x00028801 +#define CFG_GPDR2_VAL 0x520dc000 +#define CFG_GPDR3_VAL 0x0001E000 +#define CFG_GAFR0_L_VAL 0x801c0000 +#define CFG_GAFR0_U_VAL 0x00000013 +#define CFG_GAFR1_L_VAL 0x6990100A +#define CFG_GAFR1_U_VAL 0x00000008 +#define CFG_GAFR2_L_VAL 0xA0000000 +#define CFG_GAFR2_U_VAL 0x010900F2 +#define CFG_GAFR3_L_VAL 0x54000003 +#define CFG_GAFR3_U_VAL 0x00002401 +#define CFG_GRER0_VAL 0x00000000 +#define CFG_GRER1_VAL 0x00000000 +#define CFG_GRER2_VAL 0x00000000 +#define CFG_GRER3_VAL 0x00000000 +#define CFG_GFER0_VAL 0x00000000 +#define CFG_GFER1_VAL 0x00000000 +#define CFG_GFER2_VAL 0x00000000 +#define CFG_GFER3_VAL 0x00000020 + + +#define CFG_PSSR_VAL 0x20 /* CHECK */ + +/* + * Clock settings + */ +#define CFG_CKEN 0x01FFFFFF /* CHECK */ +#define CFG_CCCR 0x02000290 /* 520Mhz */ + +/* + * Memory settings + */ + +#define CFG_MSC0_VAL 0x4df84df0 +#define CFG_MSC1_VAL 0x7ff87ff4 +#define CFG_MSC2_VAL 0xa26936d4 +#define CFG_MDCNFG_VAL 0x880009C9 +#define CFG_MDREFR_VAL 0x20ca201e +#define CFG_MDMRS_VAL 0x00220022 + +#define CFG_FLYCNFG_VAL 0x00000000 +#define CFG_SXCNFG_VAL 0x40044004 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000001 +#define CFG_MCMEM0_VAL 0x00004204 +#define CFG_MCMEM1_VAL 0x00010204 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00008407 +#define CFG_MCIO1_VAL 0x0000c108 + +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x08000000 +#define DM9000_IO CONFIG_DM9000_BASE +#define DM9000_DATA (CONFIG_DM9000_BASE+0x8004) +/* #define CONFIG_DM9000_USE_8BIT */ +/* #define CONFIG_DM9000_USE_16BIT */ +#define CONFIG_DM9000_USE_32BIT + +#define CONFIG_USB_OHCI_NEW 1 +#define CFG_USB_OHCI_BOARD_INIT 1 +#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 +#define CFG_USB_OHCI_REGS_BASE 0x4C000000 +#define CFG_USB_OHCI_SLOT_NAME "trizepsiv" +#define CONFIG_USB_STORAGE 1 +#define CFG_USB_OHCI_CPU_INIT 1 + +/* + * FLASH and environment organization + */ + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER 1 + +#define CFG_MONITOR_BASE 0 +#define CFG_MONITOR_LEN 0x40000 + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* write flash less slowly */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 + +/* Flash environment locations */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#endif /* __CONFIG_H */ -- cgit v1.1 From a89cbbd27a60e6740772000fd0688ffba1c2576a Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 7 Sep 2007 01:21:25 +0200 Subject: Update CHANGELOG, minor coding style cleanup. --- CHANGELOG | 539 +++++++++++++++++++++++++++++++++++++++++++ board/trizepsiv/pxavoltage.S | 2 - 2 files changed, 539 insertions(+), 2 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 2749d69..671c836 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,542 @@ +commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3 +Author: stefano babic +Date: Thu Aug 30 23:01:49 2007 +0200 + + PXA270: Added support for TrizepsIV board. + + This patch add support for the Trizeps IV module (520Mhz). + + Signed-off-by: Stefano Babic + +commit 80172c6181c912fbb34ea3ba0c22b232b419b47f +Author: stefano babic +Date: Thu Aug 30 22:57:04 2007 +0200 + + PXA270: Add support for multiple serial ports. + + This patch adds support for multiple serial ports to the PXA target. + FFUART, BTUART and STUART are supported. + + Signed-off-by: Stefano Babic + +commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e +Author: stefano babic +Date: Thu Aug 30 22:48:47 2007 +0200 + + PXA270: fix compile issue (invalid lvalue) + + Code is broken for PXA270 due to "invalid lvalue in assignment". + + This patch fix it in pxa-regs.h + + Signed-off-by: Stefano Babic + +commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8 +Author: Jason Jin +Date: Thu Aug 30 18:19:05 2007 +0800 + + Add BUILD_DIR support for bios emulator. + + Signed-off-by: Jason Jin + +commit b4d8a55145442f136982634862341a3e02002bda +Author: Shinya Kuribayashi +Date: Fri Aug 31 14:41:51 2007 +0900 + + [MIPS] Remove inline asm string functions + + Stop using inline string functions on MIPS as other ARCHs do so, + since the optimized inline asm versions are not small. + + This change is triggered by a following MIPS build error: + common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init': + common/exports.c:32: undefined reference to `strcmp' + make: *** [u-boot] Error 1 + + Signed-off-by: Shinya Kuribayashi + +commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5 +Author: Shinya Kuribayashi +Date: Fri Aug 31 14:41:45 2007 +0900 + + [MIPS] Update asm string header + + This patches contains several bugfixes and cleanups in the latest upstream: + + - Don't include linux/config.h + - Remove buggy inline version of memscan. + - Merge with Linux 2.6.11-rc3. + - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4. + - Goodbye mips64. 31704 lines of code bite the dust. + - Replace extern inline with static inline. + - Fix return value of strncpy. + - Remove a bunch more "$1" clobbers. + + Signed-off-by: Shinya Kuribayashi + +commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2 +Author: Bartlomiej Sieka +Date: Tue Sep 4 17:31:22 2007 +0200 + + Fix do_bootm_linux() so that multi-file images with FDT blob boot. + + Fix incorrect blob address calculation in do_bootm_linux() that prevents + booting the kernel from a multi-file image (kernel + initrd + blob). + + Also, make minor updates to the U-Boot's output and to the coding style. + + Signed-off-by: Bartlomiej Sieka + +commit 041a2554ad619e80dce520c1a33210affcb6a3f2 +Author: Gary Jennejohn +Date: Fri Aug 31 14:29:04 2007 +0200 + + Add support for Sil680 IDE controller. + + o add drivers/sil680.c to support the Sil680 IDE-controller. + o drivers/Makefile: add sil680.o. + + Signed-off-by: Gary Jennejohn + +commit e79021223bc339df655e360645a52c457a74b067 +Author: Grant Likely +Date: Thu Sep 6 09:47:40 2007 -0600 + + bootm/fdt: Only process the fdt if an fdt address was provided + + Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style + kernels using the board info structure (instead of passing a device tree) + This change allows the old style booting to be used if the fdt argument + was not passed to 'bootm'. + + Signed-off-by: Grant Likely + Acked-by: Kim Phillips + +commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43 +Author: Grant Likely +Date: Thu Sep 6 09:46:23 2007 -0600 + + Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT + + Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200 + + Tested on: lite5200b + + Note: the fixup functions have not been moved to a common place. This + patch is targeted for immediate merging as in solves a build issue, but + the final name/location of the fixups is still subject to debate. I + propose to merge this now, and move the fixups in the next merge window + to be usable by all targets. + + Signed-off-by: Grant Likely + +commit 41bb76e941929f54a73206fb132f7a4c275543a3 +Author: Grant Likely +Date: Thu Sep 6 09:46:17 2007 -0600 + + libfdt: add convenience function fdt_find_and_setprop() + + Given the path to a node, fdt_find_and_setprop() allows a property value + to be set directly. + + Signed-off-by: Grant Likely + +commit 56a9270521baaa00e12639a978302a67f61ef060 +Author: Kumar Gala +Date: Thu Aug 30 16:18:18 2007 -0500 + + Fix ULI RTC support on MPC8544 DS + + The RTC on the M1575 ULI chipset requires a dummy read before + we are able to talk to the RTC. We accomplish this by adding a + second memory region to the PHB the ULI is on and read from it. + + The second region is added to maintain compatiabilty with Linux's + view of the PCI memory map. + + Signed-off-by: Kumar Gala + +commit f75e89e9b5714db2b0e80074071dfbdd6f59488a +Author: Ed Swarthout +Date: Thu Aug 30 01:58:48 2007 -0500 + + ft_board_setup update 85xx/86xx of pci/pcie bus-range property. + + pcie is now differentiated from pci. Add 8641 bus-range updates. + + Signed-off-by: Ed Swarthout + +commit 81b73dec16fd1227369a191e725e10044a9d56b8 +Author: Gary Jennejohn +Date: Fri Aug 31 15:21:46 2007 +0200 + + ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia + + The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is + set to non-zero, because it doesn't support MRM (memory-read- + multiple) correctly. We now added the possibility to configure + this register in the board config file, so that the default value + of 8 can be overridden. + + Here the details of this patch: + + o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow + board-specific settings. As an example the sequoia board requires 0. + Idea from Stefan Roese . + o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the + PCI IO-space. Obtained from Stefan Roese . + o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set + CFG_PCI_CACHE_LINE_SIZE to 0. + + Signed-off-by: Gary Jennejohn + Signed-off-by: Stefan Roese + +commit 60174746c668b309378a91488dded898e9553eae +Author: Wolfgang Denk +Date: Fri Aug 31 10:01:51 2007 +0200 + + Fix TFTP OACK code for short packets. + + The old code had a loop limit overflow bug which caused a semi- + infinite loop for small packets, because in "i + +commit ff13ac8c7bbebb238e339592de765c546dba1073 +Author: Wolfgang Denk +Date: Thu Aug 30 14:42:15 2007 +0200 + + Backout commit 8f1bc284 as it causes TFTP to fail. + + Signed-off-by: Wolfgang Denk + +commit 1900fbf255acba8b94fb442a16408ea85a1d46a6 +Author: Ed Swarthout +Date: Thu Aug 30 02:26:17 2007 -0500 + + Revert "Fix MPC8544DS PCIe3 scsi." + + This reverts commit 9468e680. + Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient. + + Signed-off-by: Ed Swarthout + +commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774 +Author: Grant Likely +Date: Wed Aug 29 18:26:24 2007 -0600 + + tftp: don't implicity trust the format of recevied packets + + The TFTP OACK code trusts that the incoming packet is formated as + ASCII text and can be processed by string functions. It also has a + loop limit overflow bug where if the packet length is less than 8, it + ends up looping over *all* of memory to find the 'blksize' string. + + This patch solves the problem by forcing the packet to be null + terminated and using strstr() to search for the sub string. + + Signed-off-by: Grant Likely + +commit 2602a5c40ae37ab965a4e240854fdaffb51328a4 +Author: Kim Phillips +Date: Wed Aug 29 09:06:05 2007 -0500 + + sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE + + this had slipped through the cracks, since the sbc board was added + after I wrote the original patch to remove all these symbols, and + before it was merged. + + Signed-off-by: Kim Phillips + +commit c5bded3c88e48ae648a75d357dc81a8255fa81f1 +Author: Wolfgang Denk +Date: Wed Aug 29 14:05:30 2007 +0200 + + Add mii_init() prototype + + to get rid of a *lot* of compiler warnings. + + Signed-off-by: Wolfgang Denk + +commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f +Author: Wolfgang Denk +Date: Wed Aug 29 13:35:03 2007 +0200 + + Disable network support on cmi_mpc5xx board + + ..because it caused compiler errors and there seems to be no + board maintainer to take care of this. + + Signed-off-by: Wolfgang Denk + +commit 9468e6804b7e25b0f6f52e53f47bce3175400a16 +Author: Kumar Gala +Date: Mon Aug 20 09:44:00 2007 -0500 + + Fix MPC8544DS PCIe3 scsi. + + + + The problem is pciauto_setup_device() getting called from fsl_pci_init.c + is allocating memory space it doesn't need. + + Signed-off-by: Ed Swarthout + Signed-off-by: Andy Fleming + +commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a +Author: Ed Swarthout +Date: Tue Aug 21 09:38:59 2007 -0500 + + 8548cds fixes + + Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the + correct consoledev needed for linux boot. + Standardize on fdt{file,addr} var to hold dtb file name. + + Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}. + + Signed-off-by: Ed Swarthout + +commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933 +Author: Haiying Wang +Date: Thu Aug 23 15:20:54 2007 -0400 + + Enable L2 cache for MPC8568MDS board + + The L2 cache size is 512KB for 8568, print out the correct informaiton. + + Signed-off-by: Haiying Wang + +commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b +Author: Jason Jin +Date: Wed Aug 22 17:54:49 2007 +0800 + + Remove the bios emulator binary files from MAI board + + Signed-off-by: Jason Jin + +commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f +Author: Kim Phillips +Date: Tue Aug 21 17:00:17 2007 -0500 + + support board vendor-common makefiles + + if a board/$(VENDOR)/common/Makefile exists, build it. + + also add the first such case, board/freescale/common/Makefile, to + handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as + dictated by board configuration. + + thusly get rid of alternate build dir errors such as: + + FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory + + by putting the common/ mkdir command in its proper place (the common + Makefile). Common bits from existing individual board Makefiles have + been removed. + + Signed-off-by: Kim Phillips + +commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd +Author: stefano babic +Date: Tue Aug 21 15:52:33 2007 +0200 + + Fix: TFTP is not working on little endian systems + + TFTP does not work anymore after multicast tftp + patch was applied on little endian systems. + This patch fix it. + + Signed-off-by: Stefano Babic + +commit 5f470948570526e9186f053a3003da7719604e90 +Author: stefano babic +Date: Tue Aug 21 15:50:33 2007 +0200 + + Fix MAC address setting in DM9000 driver. + + The logic to check if there is a correct MAC address in the DM9000 + EEPROM, added in the last patch, is wrong. Now the MAC address is + always taken from the environment, even if a suitable MAC is present + in the EEPROM. + + Signed-off-by: Stefano Babic + +commit 4a8527ef086ec7c89f40674ef024ae6f988a614a +Author: Martin Krause +Date: Tue Aug 21 12:40:34 2007 +0200 + + MPC5xxx: fix some compiler warnings in USB code + + Fix the following warnings: + - usb.c:xx: warning: function declaration isn't a prototype + - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer + from pointer wihtout a cast + + Signed-off-by: Martin Krause + +commit 16e23c3f5dab6937f5109365416808c7f15c122b +Author: Ed Swarthout +Date: Mon Aug 20 23:55:33 2007 -0500 + + fsl_pci_init - Remove self PCSRBAR allocation + + CPU physical address space was being wasted by allocating a + PCSRBAR PCI inbound region to it's memory space. + + As a rule, PCSRBAR should be left alone since it does not affect + transactions from self and other masters may have changed it. + + Signed-off-by: Ed Swarthout + +commit 0e700ce03a23bb1921149bc77008ace7103d5289 +Author: Martin Krause +Date: Mon Aug 20 13:56:47 2007 +0200 + + Fix compiler warning in include/s3c2410.h + + This patch fixes the "type qualifiers ignored on fuction return tpye" + warning for include/s3c2410.h + + Signed-off-by: Martin Krause + +commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea +Author: Dirk Behme +Date: Mon Aug 20 07:09:05 2007 +0200 + + Fix compilation error for omap2420h4_config. + + omap2420h4 switched to cfi, so remove old (already disabled) flash.c + and flash_probe() calls in env_flash.c. + + Signed-off-by: Dirk Behme + +commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f +Author: Kim Phillips +Date: Fri Aug 10 14:34:14 2007 -0500 + + fdt: remove unused OF_FLAT_TREE_MAX_SIZE references + + and make some minor corrections to the FDT part of the README. + + Signed-off-by: Kim Phillips + +commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de +Author: Wolfgang Denk +Date: Wed Aug 29 01:32:05 2007 +0200 + + Minor coding style cleanup. + + Signed-off-by: Wolfgang Denk + +commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3 +Author: Heiko Schocher +Date: Tue Aug 28 17:40:33 2007 +0200 + + [UC101] Fix: if no CF in the board, U-Boot resets sometimes. + + Signed-off-by: Heiko Schocher + +commit f98984cb194bb34dbe1db9429d3b51133af30d07 +Author: Heiko Schocher +Date: Tue Aug 28 17:39:14 2007 +0200 + + IDE: - make ide_inb () and ide_outb () "weak", so boards can + define there own I/O functions. + (Needed for the pcs440ep board). + - The default I/O Functions are again 8 Bit accesses. + - Added CONFIG_CMD_IDE for the pcs440ep Board. + + Signed-off-by: Heiko Schocher + +commit 9c02defc29b57945b600714cf61ddfd02b02fb14 +Author: Yuri Tikhonov +Date: Sat Aug 25 05:07:16 2007 +0200 + + POST: limit memory test area to not touch global data anymore + + As experienced on lwmon5, on some boards the POST memory test can + corrupt the global data buffer (bd). This patch fixes this issue + by checking and limiting this area. + + Signed-off-by: Yuri Tikhonov + Signed-off-by: Stefan Roese + +commit 75e1a84d483e36be10e206e539b028c4889e1158 +Author: Stefan Roese +Date: Fri Aug 24 15:41:42 2007 +0200 + + ppc4xx: Add RTC POST test to lwmon5 board configuration + + Since this RTC POST test is taking quite a while to complete + it's only initiated upon special keypress same as the complete + memory POST. + + Signed-off-by: Stefan Roese + +commit d7bfa620037a6d2210159387571bdf93aa32c162 +Author: Stefan Roese +Date: Fri Aug 24 15:19:10 2007 +0200 + + ppc4xx: Change GPIO signal for watchdog triggering on lwmon5 + + Signed-off-by: Stefan Roese + +commit c25dd8fc25e9ca3695db996a257d9ba4dab414db +Author: Stefan Roese +Date: Thu Aug 23 11:02:37 2007 +0200 + + ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board + + This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5 + board. Now the "eeprom" command can be used to read/write from/to this + device. Additionally a new command was added "eepromwp" to en-/disable + the write-protect of this 2nd EEPROM. + + The 1st EEPROM is not affected by this write-protect command. + + Signed-off-by: Stefan Roese + +commit c64fb30e4c5976007d56fc1789c7a0666082b536 +Author: Stefan Roese +Date: Wed Aug 22 08:56:09 2007 +0200 + + ppc4xx: Remove unused option CFG_INIT_RAM_OCM + + Signed-off-by: Stefan Roese + +commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7 +Author: Stefan Roese +Date: Tue Aug 21 16:27:57 2007 +0200 + + ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based) + + This patch adds support for the matrix keyboard on the lwmon5 board. + Since the implementation in the dsPCI is kind of compatible with the + "old" lwmon board, most of the code is copied from the lwmon + board directory. + + Signed-off-by: Stefan Roese + +commit 3e66c078003607a7d1d214c15a5f262bc1b4032f +Author: Wolfgang Denk +Date: Sun Aug 19 10:27:34 2007 +0200 + + Fix some build errors. + + Signed-off-by: Wolfgang Denk + +commit 05675735ef77dc23b5e0eb782bad1ff477b55e86 +Author: Wolfgang Denk +Date: Sat Aug 18 22:00:38 2007 +0200 + + Update CHANGELOG. + commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57 Author: Kim Phillips Date: Thu Aug 16 22:52:39 2007 -0500 diff --git a/board/trizepsiv/pxavoltage.S b/board/trizepsiv/pxavoltage.S index 5e41132..9659c2b 100644 --- a/board/trizepsiv/pxavoltage.S +++ b/board/trizepsiv/pxavoltage.S @@ -23,9 +23,7 @@ #include - .global initPXAvoltage initPXAvoltage: mov pc, lr - -- cgit v1.1 From 8d17979d0359492a822a0a409d26e3a3549b4cd4 Mon Sep 17 00:00:00 2001 From: Rafal Jaworowski Date: Fri, 7 Sep 2007 17:05:36 +0200 Subject: [MPC512x] Correct fixup relocation Signed-off-by: Rafal Jaworowski --- board/ads5121/u-boot.lds | 1 - cpu/mpc512x/config.mk | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/board/ads5121/u-boot.lds b/board/ads5121/u-boot.lds index 038d849..34ceb0f 100644 --- a/board/ads5121/u-boot.lds +++ b/board/ads5121/u-boot.lds @@ -51,7 +51,6 @@ SECTIONS { cpu/mpc512x/start.o (.text) *(.text) - *(.fixup) *(.got1) . = ALIGN(16); *(.rodata) diff --git a/cpu/mpc512x/config.mk b/cpu/mpc512x/config.mk index 8a07c5a..3259d53 100644 --- a/cpu/mpc512x/config.mk +++ b/cpu/mpc512x/config.mk @@ -19,7 +19,7 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \ -ffixed-r2 -ffixed-r29 -msoft-float -mcpu=603e -- cgit v1.1 From 08e2e5fcd2e06670b62e1680a3934c0e55c72810 Mon Sep 17 00:00:00 2001 From: Grzegorz Bernacki Date: Fri, 7 Sep 2007 17:09:21 +0200 Subject: [MPC512x] Proper handling of larger frames in the FEC driver When frame larger than local RX buffer is received, it is split and handled by two buffer descriptors. Prior to this patch the FEC driver discarded contents of a buffer descriptor without the 'LAST' bit set, so the first part of the frame was lost in case of larger frames. This fix allows to safely combine the two pieces into the whole frame. Signed-off-by: Grzegorz Bernacki --- cpu/mpc512x/fec.c | 34 +++++++++++++++++++++------------- 1 file changed, 21 insertions(+), 13 deletions(-) diff --git a/cpu/mpc512x/fec.c b/cpu/mpc512x/fec.c index 3c142a9..8104576 100644 --- a/cpu/mpc512x/fec.c +++ b/cpu/mpc512x/fec.c @@ -32,6 +32,9 @@ int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * re int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data); int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis); +static uchar rx_buff[FEC_MAX_PKT_SIZE]; +static int rx_buff_idx = 0; + /********************************************************************/ #if (DEBUG & 0x2) static void mpc512x_fec_phydump (char *devname) @@ -235,7 +238,7 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) fec->eth->op_pause = 0x00010020; /* Frame length=1518; MII mode */ - fec->eth->r_cntrl = 0x05ee000c; + fec->eth->r_cntrl = 0x05ee0024; /* Half-duplex, heartbeat disabled */ fec->eth->x_cntrl = 0x00000000; @@ -520,8 +523,7 @@ static int mpc512x_fec_recv (struct eth_device *dev) mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; volatile FEC_RBD *pRbd = &fec->bdBase->rbd[fec->rbdIndex]; unsigned long ievent; - int frame_length, len = 0; - uchar buff[FEC_MAX_PKT_SIZE]; + int frame_length = 0; #if (DEBUG & 0x1) printf ("mpc512x_fec_recv %d Start...\n", fec->rbdIndex); @@ -555,31 +557,37 @@ static int mpc512x_fec_recv (struct eth_device *dev) } if (!(pRbd->status & FEC_RBD_EMPTY)) { - if ((pRbd->status & FEC_RBD_LAST) && - !(pRbd->status & FEC_RBD_ERR) && + if (!(pRbd->status & FEC_RBD_ERR) && ((pRbd->dataLength - 4) > 14)) { /* * Get buffer size */ - frame_length = pRbd->dataLength - 4; - + if (pRbd->status & FEC_RBD_LAST) + frame_length = pRbd->dataLength - 4; + else + frame_length = pRbd->dataLength; #if (DEBUG & 0x20) { int i; - printf ("recv data hdr:"); + printf ("recv data length 0x%08x data hdr: ", + pRbd->dataLength); for (i = 0; i < 14; i++) printf ("%x ", *((uint8*)pRbd->dataPointer + i)); printf("\n"); } #endif - /* * Fill the buffer and pass it to upper layers */ - memcpy (buff, (void*)pRbd->dataPointer, frame_length); - NetReceive ((uchar*)buff, frame_length); - len = frame_length; + memcpy (&rx_buff[rx_buff_idx], (void*)pRbd->dataPointer, + frame_length - rx_buff_idx); + rx_buff_idx = frame_length; + + if (pRbd->status & FEC_RBD_LAST) { + NetReceive ((uchar*)rx_buff, frame_length); + rx_buff_idx = 0; + } } /* @@ -590,7 +598,7 @@ static int mpc512x_fec_recv (struct eth_device *dev) /* Try to fill Buffer Descriptors */ fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ - return len; + return frame_length; } /********************************************************************/ -- cgit v1.1 From ff7640c9ead8806b5d827f2b29f9cb2632add729 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 7 Sep 2007 17:43:36 +0200 Subject: Fix typo in MAKEALL script. Signed-off-by: Wolfgang Denk --- MAKEALL | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAKEALL b/MAKEALL index 68bb1ad..2597d1f 100755 --- a/MAKEALL +++ b/MAKEALL @@ -341,7 +341,7 @@ LIST_85xx=" \ LIST_86xx=" \ MPC8641HPCN \ - SBC8641D \ + sbc8641d \ " ######################################################################### -- cgit v1.1 From 15ee4734e4e08003d73d9ead3ca80e2a0672e427 Mon Sep 17 00:00:00 2001 From: Grzegorz Bernacki Date: Fri, 7 Sep 2007 17:46:18 +0200 Subject: [PPC440SPe] Convert machine check exceptions handling Convert using fixup mechanism to suppressing MCK for the duration of config read/write transaction: while fixups work fine with the case of a precise exception, we identified a major drawback with this approach when there's an imprecise case. In this scenario there is the following race condition: the fixup is (by design) set to catch the instruction following the one actually causing the exception; if an interrupt (e.g. decrementer) happens between those two instructions, the ISR code is executed before the fixup handler the machine check is no longer protected by the fixup handler as it appears as within the ISR code. In consequence the fixup approach is being phased out and replaced with explicit suppressing of MCK during a PCIe config read/write cycle. Signed-off-by: Grzegorz Bernacki --- cpu/ppc4xx/440spe_pcie.c | 59 ++++++++++++++++++++++++++++-------------------- cpu/ppc4xx/440spe_pcie.h | 16 ++----------- cpu/ppc4xx/traps.c | 6 ----- 3 files changed, 37 insertions(+), 44 deletions(-) diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c index bf68cc1..2d0b406 100644 --- a/cpu/ppc4xx/440spe_pcie.c +++ b/cpu/ppc4xx/440spe_pcie.c @@ -40,31 +40,24 @@ enum { LNKW_X8 = 0x8 }; -static inline int pcie_in_8(const volatile unsigned char __iomem *addr) +static void pcie_dmer_disable(void) { - int ret; - - PCIE_IN(lbzx, ret, addr); - - return ret; -} - -static inline int pcie_in_le16(const volatile unsigned short __iomem *addr) -{ - int ret; - - PCIE_IN(lhbrx, ret, addr) - - return ret; + mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA); + mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA); + mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA); } -static inline unsigned pcie_in_le32(const volatile unsigned __iomem *addr) +static void pcie_dmer_enable(void) { - unsigned ret; - - PCIE_IN(lwbrx, ret, addr); - - return ret; + mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA); + mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA); + mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA); } @@ -81,17 +74,27 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, devfn = PCI_BDF(0,0,0); offset += devfn << 4; + /* + * Reading from configuration space of non-existing device can + * generate transaction errors. For the read duration we suppress + * assertion of machine check exceptions to avoid those. + */ + pcie_dmer_disable (); + switch (len) { case 1: - *val = pcie_in_8(hose->cfg_data + offset); + *val = in_8(hose->cfg_data + offset); break; case 2: - *val = pcie_in_le16((u16 *)(hose->cfg_data + offset)); + *val = in_le16((u16 *)(hose->cfg_data + offset)); break; default: - *val = pcie_in_le32((u32*)(hose->cfg_data + offset)); + *val = in_le32((u32*)(hose->cfg_data + offset)); break; } + + pcie_dmer_enable (); + return 0; } @@ -107,6 +110,11 @@ static int pcie_write_config(struct pci_controller *hose, unsigned int devfn, devfn = PCI_BDF(0,0,0); offset += devfn << 4; + /* + * Suppress MCK exceptions, similar to pcie_read_config() + */ + pcie_dmer_disable (); + switch (len) { case 1: out_8(hose->cfg_data + offset, val); @@ -118,6 +126,9 @@ static int pcie_write_config(struct pci_controller *hose, unsigned int devfn, out_le32((u32 *)(hose->cfg_data + offset), val); break; } + + pcie_dmer_enable (); + return 0; } diff --git a/cpu/ppc4xx/440spe_pcie.h b/cpu/ppc4xx/440spe_pcie.h index eb7cecf..38745eb 100644 --- a/cpu/ppc4xx/440spe_pcie.h +++ b/cpu/ppc4xx/440spe_pcie.h @@ -38,6 +38,7 @@ #define DCRN_PEGPL_REGBAL(base) (base + 0x13) #define DCRN_PEGPL_REGMSK(base) (base + 0x14) #define DCRN_PEGPL_SPECIAL(base) (base + 0x15) +#define DCRN_PEGPL_CFG(base) (base + 0x16) /* * System DCRs (SDRs) @@ -161,20 +162,7 @@ mtdcr(DCRN_SDR0_CFGADDR, offset); \ mtdcr(DCRN_SDR0_CFGDATA,data);}) -#define PCIE_IN(opcode, ret, addr) \ - __asm__ __volatile__( \ - "sync\n" \ - #opcode " %0,0,%1\n" \ - "1: twi 0,%0,0\n" \ - "isync\n" \ - "b 3f\n" \ - "2: li %0,-1\n" \ - "3:\n" \ - ".section __ex_table,\"a\"\n" \ - ".balign 4\n" \ - ".long 1b,2b\n" \ - ".previous\n" \ - : "=r" (ret) : "r" (addr), "m" (*addr)); +#define GPL_DMER_MASK_DISA 0x02000000 int ppc440spe_init_pcie(void); int ppc440spe_init_pcie_rootport(int port); diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c index f5365cb..38b6f89 100644 --- a/cpu/ppc4xx/traps.c +++ b/cpu/ppc4xx/traps.c @@ -151,12 +151,6 @@ MachineCheckException(struct pt_regs *regs) int uncorr_ecc = 0; #endif - /* Probing PCI(E) using config cycles may cause this exception - * when a device is not present. To gracefully recover in such - * scenarios config read/write routines need to be instrumented in - * order to return via fixup handler. For examples refer to - * pcie_in_8(), pcie_in_le16() and pcie_in_le32() - */ if ((fixup = search_exception_table(regs->nip)) != 0) { regs->nip = fixup; val = mfspr(MCSR); -- cgit v1.1 From 7f1913938984ef6c6a46cb53e003719196d9c5de Mon Sep 17 00:00:00 2001 From: Grzegorz Bernacki Date: Fri, 7 Sep 2007 18:20:23 +0200 Subject: [PPC440SPe] Improve PCIe configuration space access - correct configuration space mapping - correct bus numbering - better access to config space Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the first device on the first bus. We now allow to configure up to 16 buses; also, scanning for devices behind the PCIe-PCIe bridge is supported, so peripheral devices farther in hierarchy can be identified. Signed-off-by: Grzegorz Bernacki --- board/amcc/katmai/init.S | 12 ++--- board/amcc/katmai/katmai.c | 9 ++-- board/amcc/yucca/init.S | 12 ++--- board/amcc/yucca/yucca.c | 9 ++-- cpu/ppc4xx/405gp_pci.c | 17 ++++--- cpu/ppc4xx/440spe_pcie.c | 111 +++++++++++++++++++++++++++++++++++---------- include/common.h | 2 +- include/configs/katmai.h | 10 ++-- include/configs/yucca.h | 10 ++-- 9 files changed, 130 insertions(+), 62 deletions(-) diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S index 5202ae6..e3f3da6 100644 --- a/board/amcc/katmai/init.S +++ b/board/amcc/katmai/init.S @@ -67,9 +67,9 @@ tlbtabA: tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I) @@ -109,9 +109,9 @@ tlbtabB: tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I) diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index b804d55..a9ae4a3 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -392,7 +392,7 @@ int katmai_pcie_card_present(int port) static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; -void pcie_setup_hoses(void) +void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; @@ -401,7 +401,7 @@ void pcie_setup_hoses(void) * assume we're called after the PCIX hose is initialized, which takes * bus ID 0 and therefore start numbering PCIe's from 1. */ - bus = 1; + bus = busno; for (i = 0; i <= 2; i++) { /* Check for katmai card presence */ if (!katmai_pcie_card_present(i)) @@ -418,8 +418,8 @@ void pcie_setup_hoses(void) hose = &pcie_hose[i]; hose->first_busno = bus; - hose->last_busno = bus; - bus++; + hose->last_busno = bus; + hose->current_busno = bus; /* setup mem resource */ pci_set_region(hose->regions + 0, @@ -443,6 +443,7 @@ void pcie_setup_hoses(void) * Config access can only go down stream */ hose->last_busno = pci_hose_scan(hose); + bus = hose->last_busno + 1; #endif } } diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S index c92dcf7..67e8f8f 100644 --- a/board/amcc/yucca/init.S +++ b/board/amcc/yucca/init.S @@ -70,9 +70,9 @@ tlbtabA: tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I) @@ -112,9 +112,9 @@ tlbtabB: tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I) diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index d08fcf3..252e4fe 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -846,7 +846,7 @@ void yucca_setup_pcie_fpga_endpoint(int port) static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; -void pcie_setup_hoses(void) +void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; @@ -855,7 +855,7 @@ void pcie_setup_hoses(void) * assume we're called after the PCIX hose is initialized, which takes * bus ID 0 and therefore start numbering PCIe's from 1. */ - bus = 1; + bus = busno; for (i = 0; i <= 2; i++) { /* Check for yucca card presence */ if (!yucca_pcie_card_present(i)) @@ -874,8 +874,8 @@ void pcie_setup_hoses(void) hose = &pcie_hose[i]; hose->first_busno = bus; - hose->last_busno = bus; - bus++; + hose->last_busno = bus; + hose->current_busno = bus; /* setup mem resource */ pci_set_region(hose->regions + 0, @@ -899,6 +899,7 @@ void pcie_setup_hoses(void) * Config access can only go down stream */ hose->last_busno = pci_hose_scan(hose); + bus = hose->last_busno + 1; #endif } } diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 2837929..282e7a1 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -443,7 +443,7 @@ void pci_init_board(void) static struct pci_controller ppc440_hose = {0}; -void pci_440_init (struct pci_controller *hose) +int pci_440_init (struct pci_controller *hose) { int reg_num = 0; @@ -459,7 +459,7 @@ void pci_440_init (struct pci_controller *hose) if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) { printf("PCI: SDR0_STRP1[PISE] not set.\n"); printf("PCI: Configuration aborted.\n"); - return; + return -1; } #elif defined(CONFIG_440GP) unsigned long strap; @@ -468,7 +468,7 @@ void pci_440_init (struct pci_controller *hose) if ((strap & CPC0_STRP1_PISE_MASK) == 0) { printf("PCI: CPC0_STRP1[PISE] not set.\n"); printf("PCI: Configuration aborted.\n"); - return; + return -1; } #endif #endif /* CONFIG_DISABLE_PISE_TEST */ @@ -477,7 +477,7 @@ void pci_440_init (struct pci_controller *hose) * PCI controller init *--------------------------------------------------------------------------*/ hose->first_busno = 0; - hose->last_busno = 0xff; + hose->last_busno = 0; /* PCI I/O space */ pci_set_region(hose->regions + reg_num++, @@ -515,7 +515,7 @@ void pci_440_init (struct pci_controller *hose) if (pci_pre_init (hose) == 0) { printf("PCI: Board-specific initialization failed.\n"); printf("PCI: Configuration aborted.\n"); - return; + return -1; } pci_register_hose( hose ); @@ -578,13 +578,16 @@ void pci_440_init (struct pci_controller *hose) #endif hose->last_busno = pci_hose_scan(hose); } + return hose->last_busno; } void pci_init_board(void) { - pci_440_init (&ppc440_hose); + int busno; + + busno = pci_440_init (&ppc440_hose); #if defined(CONFIG_440SPE) - pcie_setup_hoses(); + pcie_setup_hoses(busno + 1); #endif } diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c index 2d0b406..158f1c5 100644 --- a/cpu/ppc4xx/440spe_pcie.c +++ b/cpu/ppc4xx/440spe_pcie.c @@ -40,6 +40,23 @@ enum { LNKW_X8 = 0x8 }; +static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn) +{ + u8 *base = (u8*)hose->cfg_data; + + /* use local configuration space for the first bus */ + if (PCI_BUS(devfn) == 0) { + if (hose->cfg_data == (u8*)CFG_PCIE0_CFGBASE) + base = (u8*)CFG_PCIE0_XCFGBASE; + if (hose->cfg_data == (u8*)CFG_PCIE1_CFGBASE) + base = (u8*)CFG_PCIE1_XCFGBASE; + if (hose->cfg_data == (u8*)CFG_PCIE2_CFGBASE) + base = (u8*)CFG_PCIE2_XCFGBASE; + } + + return base; +} + static void pcie_dmer_disable(void) { mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE), @@ -60,18 +77,35 @@ static void pcie_dmer_enable(void) mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA); } - static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, int offset, int len, u32 *val) { + u8 *address; *val = 0; + + /* + * Bus numbers are relative to hose->first_busno + */ + devfn -= PCI_BDF(hose->first_busno, 0, 0); + /* - * 440SPE implements only one function per port + * NOTICE: configuration space ranges are currenlty mapped only for + * the first 16 buses, so such limit must be imposed. In case more + * buses are required the TLB settings in board/amcc//init.S + * need to be altered accordingly (one bus takes 1 MB of memory space). */ - if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1))) + if (PCI_BUS(devfn) >= 16) return 0; - devfn = PCI_BDF(0,0,0); + /* + * Only single device/single function is supported for the primary and + * secondary buses of the 440SPe host bridge. + */ + if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) && + ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1))) + return 0; + + address = pcie_get_base(hose, devfn); offset += devfn << 4; /* @@ -101,13 +135,24 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, static int pcie_write_config(struct pci_controller *hose, unsigned int devfn, int offset, int len, u32 val) { + u8 *address; + /* - * 440SPE implements only one function per port + * Bus numbers are relative to hose->first_busno */ - if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1))) + devfn -= PCI_BDF(hose->first_busno, 0, 0); + + /* + * Same constraints as in pcie_read_config(). + */ + if (PCI_BUS(devfn) >= 16) return 0; - devfn = PCI_BDF(0,0,0); + if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) && + ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1))) + return 0; + + address = pcie_get_base(hose, devfn); offset += devfn << 4; /* @@ -137,7 +182,7 @@ int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u u32 v; int rv; - rv = pcie_read_config(hose, dev, offset, 1, &v); + rv = pcie_read_config(hose, dev, offset, 1, &v); *val = (u8)v; return rv; } @@ -794,12 +839,12 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port) volatile void *rmbase = NULL; pci_set_ops(hose, - pcie_read_config_byte, - pcie_read_config_word, - pcie_read_config_dword, - pcie_write_config_byte, - pcie_write_config_word, - pcie_write_config_dword); + pcie_read_config_byte, + pcie_read_config_word, + pcie_read_config_dword, + pcie_write_config_byte, + pcie_write_config_word, + pcie_write_config_dword); switch (port) { case 0: @@ -822,14 +867,9 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port) /* * Set bus numbers on our root port */ - if (ppc440spe_revB()) { - out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); - out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1); - out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1); - } else { - out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); - out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0); - } + out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); + out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1); + out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1); /* * Set up outbound translation to hose->mem_space from PLB @@ -886,6 +926,29 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port) in_le16((u16 *)(mbase + PCI_COMMAND)) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); printf("PCIE:%d successfully set as rootpoint\n",port); + + /* Set Device and Vendor Id */ + switch (port) { + case 0: + out_le16(mbase + 0x200, 0xaaa0); + out_le16(mbase + 0x202, 0xbed0); + break; + case 1: + out_le16(mbase + 0x200, 0xaaa1); + out_le16(mbase + 0x202, 0xbed1); + break; + case 2: + out_le16(mbase + 0x200, 0xaaa2); + out_le16(mbase + 0x202, 0xbed2); + break; + default: + out_le16(mbase + 0x200, 0xaaa3); + out_le16(mbase + 0x202, 0xbed3); + } + + /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */ + out_le32(mbase + 0x208, 0x06040001); + } int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port) @@ -963,8 +1026,8 @@ int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port) /* Enable I/O, Mem, and Busmaster cycles */ out_le16((u16 *)(mbase + PCI_COMMAND), - in_le16((u16 *)(mbase + PCI_COMMAND)) | - PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + in_le16((u16 *)(mbase + PCI_COMMAND)) | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); out_le16(mbase + 0x200,0xcaad); /* Setting vendor ID */ out_le16(mbase + 0x202,0xfeed); /* Setting device ID */ attempts = 10; diff --git a/include/common.h b/include/common.h index 9a5a0ab..aca281b 100644 --- a/include/common.h +++ b/include/common.h @@ -275,7 +275,7 @@ void pciinfo (int, int); # endif int is_pci_host (struct pci_controller *); #if defined(CONFIG_440SPE) - void pcie_setup_hoses(void); + void pcie_setup_hoses(int busno); #endif #endif diff --git a/include/configs/katmai.h b/include/configs/katmai.h index b6d0f51..7834e39 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -66,11 +66,11 @@ #define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ #define CFG_PCIE0_CFGBASE 0xc0000000 -#define CFG_PCIE0_XCFGBASE 0xc0000400 -#define CFG_PCIE1_CFGBASE 0xc0001000 -#define CFG_PCIE1_XCFGBASE 0xc0001400 -#define CFG_PCIE2_CFGBASE 0xc0002000 -#define CFG_PCIE2_XCFGBASE 0xc0002400 +#define CFG_PCIE1_CFGBASE 0xc1000000 +#define CFG_PCIE2_CFGBASE 0xc2000000 +#define CFG_PCIE0_XCFGBASE 0xc3000000 +#define CFG_PCIE1_XCFGBASE 0xc3001000 +#define CFG_PCIE2_XCFGBASE 0xc3002000 /* System RAM mapped to PCI space */ #define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 906f046..323535a 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -68,11 +68,11 @@ #define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ #define CFG_PCIE0_CFGBASE 0xc0000000 -#define CFG_PCIE0_XCFGBASE 0xc0000400 -#define CFG_PCIE1_CFGBASE 0xc0001000 -#define CFG_PCIE1_XCFGBASE 0xc0001400 -#define CFG_PCIE2_CFGBASE 0xc0002000 -#define CFG_PCIE2_XCFGBASE 0xc0002400 +#define CFG_PCIE1_CFGBASE 0xc1000000 +#define CFG_PCIE2_CFGBASE 0xc2000000 +#define CFG_PCIE0_XCFGBASE 0xc3000000 +#define CFG_PCIE1_XCFGBASE 0xc3001000 +#define CFG_PCIE2_XCFGBASE 0xc3002000 /* System RAM mapped to PCI space */ #define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE -- cgit v1.1 From 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778 Mon Sep 17 00:00:00 2001 From: Grzegorz Bernacki Date: Fri, 7 Sep 2007 18:35:37 +0200 Subject: [PPC440SPe] PCIe environment settings for Katmai and Yucca - 'pciconfighost' is set by default in order to be able to scan bridges behind the primary host/PCIe - 'pciscandelay' env variable is recognized to allow for user-controlled delay before the PCIe bus enumeration; some peripheral devices require a significant delay before they can be scanned (e.g. LSI8408E); without the delay they are not detected Signed-off-by: Grzegorz Bernacki --- board/amcc/katmai/katmai.c | 12 ++++++++++++ board/amcc/yucca/yucca.c | 12 ++++++++++++ include/configs/katmai.h | 3 ++- include/configs/yucca.h | 3 ++- 4 files changed, 28 insertions(+), 2 deletions(-) diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index a9ae4a3..afd60ec 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -396,6 +396,8 @@ void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; + char *env; + unsigned int delay; /* * assume we're called after the PCIX hose is initialized, which takes @@ -439,6 +441,16 @@ void pcie_setup_hoses(int busno) */ #else ppc440spe_setup_pcie_rootpoint(hose, i); + + env = getenv ("pciscandelay"); + if (env != NULL) { + delay = simple_strtoul (env, NULL, 10); + if (delay > 5) + printf ("Warning, expect noticable delay before PCIe" + "scan due to 'pciscandelay' value!\n"); + mdelay (delay * 1000); + } + /* * Config access can only go down stream */ diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 252e4fe..397b018 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -850,6 +850,8 @@ void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; + char *env; + unsigned int delay; /* * assume we're called after the PCIX hose is initialized, which takes @@ -895,6 +897,16 @@ void pcie_setup_hoses(int busno) */ #else ppc440spe_setup_pcie_rootpoint(hose, i); + + env = getenv ("pciscandelay"); + if (env != NULL) { + delay = simple_strtoul (env, NULL, 10); + if (delay > 5) + printf ("Warning, expect noticable delay before PCIe" + "scan due to 'pciscandelay' value!\n"); + mdelay (delay * 1000); + } + /* * Config access can only go down stream */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 7834e39..7908e5a 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -201,6 +201,7 @@ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ "kozio=bootm ffc60000\0" \ + "pciconfighost=1\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -322,7 +323,7 @@ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#undef CONFIG_PCI_CONFIG_HOST_BRIDGE +#define CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 323535a..74033b4 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -182,6 +182,7 @@ "cp.b ${fileaddr} FFFB0000 ${filesize};" \ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ + "pciconfighost=1\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -297,7 +298,7 @@ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#undef CONFIG_PCI_CONFIG_HOST_BRIDGE +#define CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ -- cgit v1.1 From a7d7eca791a37f452c9da10fef4b31dd7aa9a622 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 7 Sep 2007 09:25:07 -0600 Subject: Bugfix: make bootm+libfdt compile on boards with no flash Signed-off-by: Grant Likely --- common/cmd_bootm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 9f5e0b4..6ebedfb 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -834,9 +834,11 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, of_flat_tree += 4 - tail; } +#ifndef CFG_NO_FLASH /* move the blob if it is in flash (set of_data to !null) */ if (addr2info ((ulong)of_flat_tree) != NULL) of_data = (ulong)of_flat_tree; +#endif #if defined(CONFIG_OF_FLAT_TREE) -- cgit v1.1 From 1d9e31e04911a6bb7cc66dd91132c699101c32e2 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 9 Sep 2007 21:21:33 +0200 Subject: Fix compile error in spc1920 config. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Markus Klotzbücher Signed-off-by: Wolfgang Denk --- include/configs/spc1920.h | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index b4ab9ad..2efc8f1 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -31,14 +31,9 @@ #undef CONFIG_8xx_CONS_NONE #define CONFIG_MII -/* #define MII_DEBUG */ -/* #define CONFIG_FEC_ENET */ #undef CONFIG_ETHER_ON_FEC1 #define CONFIG_ETHER_ON_FEC2 #define FEC_ENET -/* #define CONFIG_FEC2_PHY_NORXERR */ -/* #define CFG_DISCOVER_PHY */ -/* #define CONFIG_PHY_ADDR 0x1 */ #define CONFIG_FEC2_PHY 1 #define CONFIG_BAUDRATE 19200 @@ -100,14 +95,12 @@ #define CONFIG_CMD_ECHO #define CONFIG_CMD_IMMAP #define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C #define CONFIG_CMD_MII -#undef CONFIG_CMD_NET - - /* * Miscellaneous configurable options */ -- cgit v1.1 From e251e00d0db4b36d1d2b7e38fec43a7296b529a2 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Mon, 10 Sep 2007 11:34:00 +0900 Subject: Remove compiler warning: target CPU does not support interworking Signed-off-by: Kyungmin Park --- cpu/arm1136/config.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/cpu/arm1136/config.mk b/cpu/arm1136/config.mk index e39e774..6ab0dd3 100644 --- a/cpu/arm1136/config.mk +++ b/cpu/arm1136/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv5 # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -- cgit v1.1