From 9ad1502da08207f96104310c56d5b6cb71db0b13 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Sun, 8 May 2016 22:29:57 +0800 Subject: MLK-12748-3 imx: adjust imx7d lpddr3 lpsr exit flow On i.MX7D lpddr3, retention mode exit flow should restore more registers to make sure the ddr controller and ddr phy settings restored properly, otherwise, some of the boards can NOT pass memtester after retention mode exited. For LPSR mode, ddr resume flow is same as retention mode, just adjust it accordingly. Signed-off-by: Anson Huang --- board/freescale/mx7d_12x12_lpddr3_arm2/plugin.S | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/board/freescale/mx7d_12x12_lpddr3_arm2/plugin.S b/board/freescale/mx7d_12x12_lpddr3_arm2/plugin.S index fbcd682..aaf65c2 100644 --- a/board/freescale/mx7d_12x12_lpddr3_arm2/plugin.S +++ b/board/freescale/mx7d_12x12_lpddr3_arm2/plugin.S @@ -151,7 +151,7 @@ TUNE_END: str r7, [r3, r6] ldr r6, =0x108 - ldr r7, =0x03060707 + ldr r7, =0x03060708 str r7, [r3, r6] ldr r6, =0x10c @@ -174,6 +174,10 @@ TUNE_END: ldr r7, =0x00000202 str r7, [r3, r6] + ldr r6, =0x120 + ldr r7, =0x00000202 + str r7, [r3, r6] + ldr r6, =0x180 ldr r7, =0x00600018 str r7, [r3, r6] @@ -198,6 +202,10 @@ TUNE_END: ldr r7, =0x00171717 str r7, [r3, r6] + ldr r6, =0x210 + ldr r7, =0xF00 + str r7, [r3, r6] + ldr r6, =0x214 ldr r7, =0x05050505 str r7, [r3, r6] @@ -267,6 +275,10 @@ TUNE_END: ldr r7, =0x0007080C str r7, [r4, r6] + ldr r6, =0xb0 + ldr r7, =0x1010007e + str r7, [r4, r6] + ldr r7, [r1, #0x800] and r7, r7, #0xFF cmp r7, #0x11 -- cgit v1.1