From 9723bbb46abb7b2ca24eead5114a3faa58060c20 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Wed, 16 Jan 2008 14:26:59 +0100 Subject: nand: Correct NAND erase percentage output For NAND erase sizes smaller than one NAND erase block, erase percentage output becomes grater than 100% e.g. -- cut -- > nand info Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB > nand erase 0x100000 0x2000 NAND erase: device 0 offset 0x100000, size 0x2000 Erasing at 0x100000 -- 200% complete. OK > -- cut -- Correct this and give user a warning that more is erased than specified: -- cut -- > nand erase 0x100000 0x2000 NAND erase: device 0 offset 0x100000, size 0x2000 Warning: Erase size 0x00002000 smaller than one erase block 0x00004000 Erasing 0x00004000 instead Erasing at 0x100000 -- 100% complete. OK > -- cut -- Signed-off-by: Dirk Behme --- drivers/mtd/nand/nand_util.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index 6c5624a..c82f77b 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -153,6 +153,13 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) priv_nand->bbt = NULL; } + if (erase_length < meminfo->erasesize) { + printf("Warning: Erase size 0x%08x smaller than one " \ + "erase block 0x%08x\n",erase_length, meminfo->erasesize); + printf(" Erasing 0x%08x instead\n", meminfo->erasesize); + erase_length = meminfo->erasesize; + } + for (; erase.addr < opts->offset + erase_length; erase.addr += meminfo->erasesize) { -- cgit v1.1