From 924eb369e341fbde52c4fa16a1b5e8208fec94bf Mon Sep 17 00:00:00 2001 From: Aneesh V Date: Thu, 21 Jul 2011 09:29:26 -0400 Subject: omap4: sdram init changes for omap4460 Signed-off-by: Aneesh V Signed-off-by: Sandeep Paulraj --- arch/arm/cpu/armv7/omap4/emif.c | 39 +++++++++++++++++++--------------- arch/arm/include/asm/arch-omap4/emif.h | 10 +++++++-- 2 files changed, 30 insertions(+), 19 deletions(-) diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c index 1234a7e..487ec42 100644 --- a/arch/arm/cpu/armv7/omap4/emif.c +++ b/arch/arm/cpu/armv7/omap4/emif.c @@ -151,22 +151,13 @@ static void emif_update_timings(u32 base, const struct emif_regs *regs) writel(regs->zq_config, &emif->emif_zq_config); writel(regs->temp_alert_config, &emif->emif_temp_alert_config); writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); - /* - * Workaround: - * In a specific situation, the OCP interface between the DMM and - * EMIF may hang. - * 1. A TILER port is used to perform 2D burst writes of - * width 1 and height 8 - * 2. ELLAn port is used to perform reads - * 3. All accesses are routed to the same EMIF controller - * - * Work around to avoid this issue REG_SYS_THRESH_MAX value should - * be kept higher than default 0x7. As per recommondation 0x0A will - * be used for better performance with REG_LL_THRESH_MAX = 0x00 - */ - if (omap_revision() == OMAP4430_ES1_0) { - writel(EMIF_L3_CONFIG_VAL_SYS_THRESH_0A_LL_THRESH_00, - &emif->emif_l3_config); + + if (omap_revision() >= OMAP4460_ES1_0) { + writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0, + &emif->emif_l3_config); + } else { + writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0, + &emif->emif_l3_config); } } @@ -504,7 +495,7 @@ static u32 get_read_idle_ctrl_reg(u8 volt_ramp) { u32 idle = 0, val = 0; if (volt_ramp) - val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 + 1; + val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1; else /*Maximum value in normal conditions - suggested by hw team */ val = 0x1FF; @@ -1237,6 +1228,20 @@ static void dmm_init(u32 base) &hw_lisa_map_regs->dmm_lisa_map_1); writel(lisa_map_regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); + + if (omap_revision() >= OMAP4460_ES1_0) { + hw_lisa_map_regs = + (struct dmm_lisa_map_regs *)OMAP44XX_MA_LISA_MAP_BASE; + + writel(lisa_map_regs->dmm_lisa_map_3, + &hw_lisa_map_regs->dmm_lisa_map_3); + writel(lisa_map_regs->dmm_lisa_map_2, + &hw_lisa_map_regs->dmm_lisa_map_2); + writel(lisa_map_regs->dmm_lisa_map_1, + &hw_lisa_map_regs->dmm_lisa_map_1); + writel(lisa_map_regs->dmm_lisa_map_0, + &hw_lisa_map_regs->dmm_lisa_map_0); + } } /* diff --git a/arch/arm/include/asm/arch-omap4/emif.h b/arch/arm/include/asm/arch-omap4/emif.h index a167508..37ad1fd 100644 --- a/arch/arm/include/asm/arch-omap4/emif.h +++ b/arch/arm/include/asm/arch-omap4/emif.h @@ -248,6 +248,8 @@ /* OCP_CONFIG */ #define OMAP44XX_REG_SYS_THRESH_MAX_SHIFT 24 #define OMAP44XX_REG_SYS_THRESH_MAX_MASK (0xf << 24) +#define OMAP44XX_REG_MPU_THRESH_MAX_SHIFT 20 +#define OMAP44XX_REG_MPU_THRESH_MAX_MASK (0xf << 20) #define OMAP44XX_REG_LL_THRESH_MAX_SHIFT 16 #define OMAP44XX_REG_LL_THRESH_MAX_MASK (0xf << 16) #define OMAP44XX_REG_PR_OLD_COUNT_SHIFT 0 @@ -472,6 +474,9 @@ /* DMM */ #define OMAP44XX_DMM_LISA_MAP_BASE 0x4E000040 +/* Memory Adapter (4460 onwards) */ +#define OMAP44XX_MA_LISA_MAP_BASE 0x482AF040 + /* DMM_LISA_MAP */ #define OMAP44XX_SYS_ADDR_SHIFT 24 #define OMAP44XX_SYS_ADDR_MASK (0xff << 24) @@ -774,8 +779,9 @@ struct control_lpddr2io_regs { ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\ & OMAP44XX_REG_PD_TIM_SHDW_MASK)) -/* EMIF_L3_CONFIG register value for ES1*/ -#define EMIF_L3_CONFIG_VAL_SYS_THRESH_0A_LL_THRESH_00 0x0A0000FF +/* EMIF_L3_CONFIG register value */ +#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0 0x0A0000FF +#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0 0x0A300000 /* * Value of bits 12:31 of DDR_PHY_CTRL_1 register: * All these fields have magic values dependent on frequency and -- cgit v1.1