From 91e9da8e80256f5f233e3ca2989af7cf5a53df01 Mon Sep 17 00:00:00 2001 From: Juan Gutierrez Date: Thu, 27 Oct 2016 16:29:48 -0500 Subject: MXSCM-212: mx6dqscm: usb: fix usb_otg_id iomux pad settings USB_OTG_ID iomux pad was missconfigured and not selecting the GPIO1 Alternative for QWKS and the ENET_RX_ERR for EVB, as a consequence when connecting a USB device the PWR_EN was disabled. So usb function like "usb start" was not working as it should. Signed-off-by: Juan Gutierrez --- board/freescale/mx6dqscm/mx6dqscm.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/board/freescale/mx6dqscm/mx6dqscm.c b/board/freescale/mx6dqscm/mx6dqscm.c index a64e1c2..9a73a6a 100644 --- a/board/freescale/mx6dqscm/mx6dqscm.c +++ b/board/freescale/mx6dqscm/mx6dqscm.c @@ -611,7 +611,11 @@ int board_eth_init(bd_t *bis) static iomux_v3_cfg_t const usb_otg_pads[] = { MX6_PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), +#ifdef CONFIG_SCMEVB + MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL), +#else MX6_PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL), +#endif }; static iomux_v3_cfg_t const usb_hc1_pads[] = { @@ -627,7 +631,11 @@ static void setup_usb(void) * set daisy chain for otg_pin_id on 6q. * for 6dl, this bit is reserved */ +#ifdef CONFIG_SCMEVB + imx_iomux_set_gpr_register(1, 13, 1, 0); +#else imx_iomux_set_gpr_register(1, 13, 1, 1); +#endif imx_iomux_v3_setup_multiple_pads(usb_hc1_pads, ARRAY_SIZE(usb_hc1_pads)); -- cgit v1.1