From 32ff4b7fe410bdea29ca38ab15f57e731fc920d1 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 Oct 2010 07:18:03 -0400 Subject: stdio: constify "name" arg in public api Signed-off-by: Mike Frysinger --- common/console.c | 4 ++-- common/stdio.c | 4 ++-- include/common.h | 2 +- include/iomux.h | 2 +- include/stdio_dev.h | 4 ++-- 5 files changed, 8 insertions(+), 8 deletions(-) diff --git a/common/console.c b/common/console.c index 7e01886..8c650e0 100644 --- a/common/console.c +++ b/common/console.c @@ -479,7 +479,7 @@ inline void dbg(const char *fmt, ...) /** U-Boot INIT FUNCTIONS *************************************************/ -struct stdio_dev *search_device(int flags, char *name) +struct stdio_dev *search_device(int flags, const char *name) { struct stdio_dev *dev; @@ -491,7 +491,7 @@ struct stdio_dev *search_device(int flags, char *name) return NULL; } -int console_assign(int file, char *devname) +int console_assign(int file, const char *devname) { int flag; struct stdio_dev *dev; diff --git a/common/stdio.c b/common/stdio.c index ab7c5ab..b20772c 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -105,7 +105,7 @@ struct list_head* stdio_get_list(void) return &(devs.list); } -struct stdio_dev* stdio_get_by_name(char* name) +struct stdio_dev* stdio_get_by_name(const char *name) { struct list_head *pos; struct stdio_dev *dev; @@ -155,7 +155,7 @@ int stdio_register (struct stdio_dev * dev) * returns 0 if success, -1 if device is assigned and 1 if devname not found */ #ifdef CONFIG_SYS_STDIO_DEREGISTER -int stdio_deregister(char *devname) +int stdio_deregister(const char *devname) { int l; struct list_head *pos; diff --git a/include/common.h b/include/common.h index 189ad81..0d1c872 100644 --- a/include/common.h +++ b/include/common.h @@ -655,7 +655,7 @@ char * strmhz(char *buf, long hz); /* common/console.c */ int console_init_f(void); /* Before relocation; uses the serial stuff */ int console_init_r(void); /* After relocation; uses the console stuff */ -int console_assign (int file, char *devname); /* Assign the console */ +int console_assign(int file, const char *devname); /* Assign the console */ int ctrlc (void); int had_ctrlc (void); /* have we had a Control-C since last clear? */ void clear_ctrlc (void); /* clear the Control-C condition */ diff --git a/include/iomux.h b/include/iomux.h index e38a81e..fcf0f93 100644 --- a/include/iomux.h +++ b/include/iomux.h @@ -43,6 +43,6 @@ extern int cd_count[MAX_FILES]; int iomux_doenv(const int, const char *); void iomux_printdevs(const int); -struct stdio_dev *search_device(int, char *); +struct stdio_dev *search_device(int, const char *); #endif /* _IO_MUX_H */ diff --git a/include/stdio_dev.h b/include/stdio_dev.h index 83da4cd..82ad463 100644 --- a/include/stdio_dev.h +++ b/include/stdio_dev.h @@ -93,10 +93,10 @@ int stdio_register (struct stdio_dev * dev); int stdio_init (void); void stdio_print_current_devices(void); #ifdef CONFIG_SYS_STDIO_DEREGISTER -int stdio_deregister(char *devname); +int stdio_deregister(const char *devname); #endif struct list_head* stdio_get_list(void); -struct stdio_dev* stdio_get_by_name(char* name); +struct stdio_dev* stdio_get_by_name(const char* name); struct stdio_dev* stdio_clone(struct stdio_dev *dev); #ifdef CONFIG_ARM_DCC_MULTI -- cgit v1.1 From 3f7cfeea2dc200cc54081df91decb2ca14afceca Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 Oct 2010 07:18:09 -0400 Subject: ext2: constify file/dir names Signed-off-by: Mike Frysinger --- fs/ext2/ext2fs.c | 4 ++-- include/ext2fs.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/ext2/ext2fs.c b/fs/ext2/ext2fs.c index a88cf87..e119e13 100644 --- a/fs/ext2/ext2fs.c +++ b/fs/ext2/ext2fs.c @@ -749,7 +749,7 @@ int ext2fs_find_file } -int ext2fs_ls (char *dirname) { +int ext2fs_ls (const char *dirname) { ext2fs_node_t dirnode; int status; @@ -769,7 +769,7 @@ int ext2fs_ls (char *dirname) { } -int ext2fs_open (char *filename) { +int ext2fs_open (const char *filename) { ext2fs_node_t fdiro = NULL; int status; int len; diff --git a/include/ext2fs.h b/include/ext2fs.h index de935b0..163a9bb 100644 --- a/include/ext2fs.h +++ b/include/ext2fs.h @@ -74,8 +74,8 @@ typedef enum extern int ext2fs_set_blk_dev(block_dev_desc_t *rbdd, int part); -extern int ext2fs_ls (char *dirname); -extern int ext2fs_open (char *filename); +extern int ext2fs_ls (const char *dirname); +extern int ext2fs_open (const char *filename); extern int ext2fs_read (char *buf, unsigned len); extern int ext2fs_mount (unsigned part_length); extern int ext2fs_close(void); -- cgit v1.1 From 9d8461cc696c99cbf2378d07d87198a732fa03ba Mon Sep 17 00:00:00 2001 From: Wolfgang Wegner Date: Fri, 23 Apr 2010 11:08:05 +0200 Subject: add Xilinx_abort_fn to Xilinx_Spartan3_Slave_Serial_fns Currently the hardware was left in an undefined state in case Spartan3 serial load failed. This patch adds Xilinx_abort_fn to give the board a possibility to clean up in this case. Signed-off-by: Wolfgang Wegner --- drivers/fpga/spartan3.c | 6 ++++++ include/spartan3.h | 1 + 2 files changed, 7 insertions(+) diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c index 7a89b56..1dd6f26 100644 --- a/drivers/fpga/spartan3.c +++ b/drivers/fpga/spartan3.c @@ -366,6 +366,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize) CONFIG_FPGA_DELAY (); if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to start.\n"); + if (*fn->abort) + (*fn->abort) (cookie); return FPGA_FAIL; } } while (!(*fn->init) (cookie)); @@ -380,6 +382,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize) CONFIG_FPGA_DELAY (); if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to clear.\n"); + if (*fn->abort) + (*fn->abort) (cookie); return FPGA_FAIL; } } while ((*fn->init) (cookie)); @@ -394,6 +398,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize) while DONE is low (inactive) */ if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) { puts ("** CRC error during FPGA load.\n"); + if (*fn->abort) + (*fn->abort) (cookie); return (FPGA_FAIL); } val = data [bytecount ++]; diff --git a/include/spartan3.h b/include/spartan3.h index d5a589d..0f0b400 100644 --- a/include/spartan3.h +++ b/include/spartan3.h @@ -58,6 +58,7 @@ typedef struct { Xilinx_wr_fn wr; Xilinx_post_fn post; Xilinx_bwr_fn bwr; /* block write function */ + Xilinx_abort_fn abort; } Xilinx_Spartan3_Slave_Serial_fns; /* Device Image Sizes -- cgit v1.1 From ed8456f64d8f7f116a35d9a668467864b9f75e82 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 5 May 2010 09:23:07 +0530 Subject: pl01x: use C structs and readl/writel Use C structs for registers, and use readl/writel instead of custom accessors. Acked-by: Michael Brandt Signed-off-by: Rabin Vincent --- drivers/serial/serial_pl01x.c | 50 ++++++++++++++++++++++++++----------------- drivers/serial/serial_pl01x.h | 41 +++++++++++++++++++---------------- 2 files changed, 52 insertions(+), 39 deletions(-) diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index c0ae947..5dfcde8 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -47,14 +47,20 @@ static int pl01x_tstc (int portnum); unsigned int baudrate = CONFIG_BAUDRATE; DECLARE_GLOBAL_DATA_PTR; +static struct pl01x_regs *pl01x_get_regs(int portnum) +{ + return (struct pl01x_regs *) port[portnum]; +} + #ifdef CONFIG_PL010_SERIAL int serial_init (void) { + struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); unsigned int divisor; /* First, disable everything */ - writel(0x0, port[CONSOLE_PORT] + UART_PL010_CR); + writel(0, ®s->pl010_cr); /* Set baud rate */ switch (baudrate) { @@ -82,15 +88,14 @@ int serial_init (void) divisor = UART_PL010_BAUD_38400; } - writel(((divisor & 0xf00) >> 8), port[CONSOLE_PORT] + UART_PL010_LCRM); - writel((divisor & 0xff), port[CONSOLE_PORT] + UART_PL010_LCRL); + writel((divisor & 0xf00) >> 8, ®s->pl010_lcrm); + writel(divisor & 0xff, ®s->pl010_lcrl); /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ - writel((UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN), - port[CONSOLE_PORT] + UART_PL010_LCRH); + writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, ®s->pl010_lcrh); /* Finally, enable the UART */ - writel((UART_PL010_CR_UARTEN), port[CONSOLE_PORT] + UART_PL010_CR); + writel(UART_PL010_CR_UARTEN, ®s->pl010_cr); return 0; } @@ -101,13 +106,14 @@ int serial_init (void) int serial_init (void) { + struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); unsigned int temp; unsigned int divider; unsigned int remainder; unsigned int fraction; /* First, disable everything */ - writel(0x0, port[CONSOLE_PORT] + UART_PL011_CR); + writel(0, ®s->pl011_cr); /* * Set baud rate @@ -121,16 +127,16 @@ int serial_init (void) temp = (8 * remainder) / baudrate; fraction = (temp >> 1) + (temp & 1); - writel(divider, port[CONSOLE_PORT] + UART_PL011_IBRD); - writel(fraction, port[CONSOLE_PORT] + UART_PL011_FBRD); + writel(divider, ®s->pl011_ibrd); + writel(fraction, ®s->pl011_fbrd); /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ - writel((UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN), - port[CONSOLE_PORT] + UART_PL011_LCRH); + writel(UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN, + ®s->pl011_lcrh); /* Finally, enable the UART */ - writel((UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE), - port[CONSOLE_PORT] + UART_PL011_CR); + writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE, + ®s->pl011_cr); return 0; } @@ -170,28 +176,31 @@ void serial_setbrg (void) static void pl01x_putc (int portnum, char c) { + struct pl01x_regs *regs = pl01x_get_regs(portnum); + /* Wait until there is space in the FIFO */ - while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF) + while (readl(®s->fr) & UART_PL01x_FR_TXFF) WATCHDOG_RESET(); /* Send the character */ - writel(c, port[portnum] + UART_PL01x_DR); + writel(c, ®s->dr); } static int pl01x_getc (int portnum) { + struct pl01x_regs *regs = pl01x_get_regs(portnum); unsigned int data; /* Wait until there is data in the FIFO */ - while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE) + while (readl(®s->fr) & UART_PL01x_FR_RXFE) WATCHDOG_RESET(); - data = readl(port[portnum] + UART_PL01x_DR); + data = readl(®s->dr); /* Check for an error flag */ if (data & 0xFFFFFF00) { /* Clear the error */ - writel(0xFFFFFFFF, port[portnum] + UART_PL01x_ECR); + writel(0xFFFFFFFF, ®s->ecr); return -1; } @@ -200,7 +209,8 @@ static int pl01x_getc (int portnum) static int pl01x_tstc (int portnum) { + struct pl01x_regs *regs = pl01x_get_regs(portnum); + WATCHDOG_RESET(); - return !(readl(port[portnum] + UART_PL01x_FR) & - UART_PL01x_FR_RXFE); + return !(readl(®s->fr) & UART_PL01x_FR_RXFE); } diff --git a/drivers/serial/serial_pl01x.h b/drivers/serial/serial_pl01x.h index 5f20fdd..b670c24 100644 --- a/drivers/serial/serial_pl01x.h +++ b/drivers/serial/serial_pl01x.h @@ -29,10 +29,28 @@ * Definitions common to both PL010 & PL011 * */ -#define UART_PL01x_DR 0x00 /* Data read or written from the interface. */ -#define UART_PL01x_RSR 0x04 /* Receive status register (Read). */ -#define UART_PL01x_ECR 0x04 /* Error clear register (Write). */ -#define UART_PL01x_FR 0x18 /* Flag register (Read only). */ + +#ifndef __ASSEMBLY__ +/* + * We can use a combined structure for PL010 and PL011, because they overlap + * only in common registers. + */ +struct pl01x_regs { + u32 dr; /* 0x00 Data register */ + u32 ecr; /* 0x04 Error clear register (Write) */ + u32 pl010_lcrh; /* 0x08 Line control register, high byte */ + u32 pl010_lcrm; /* 0x0C Line control register, middle byte */ + u32 pl010_lcrl; /* 0x10 Line control register, low byte */ + u32 pl010_cr; /* 0x14 Control register */ + u32 fr; /* 0x18 Flag register (Read only) */ + u32 reserved; + u32 ilpr; /* 0x20 IrDA low-power counter register */ + u32 pl011_ibrd; /* 0x24 Integer baud rate register */ + u32 pl011_fbrd; /* 0x28 Fractional baud rate register */ + u32 pl011_lcrh; /* 0x2C Line control register */ + u32 pl011_cr; /* 0x30 Control register */ +}; +#endif #define UART_PL01x_RSR_OE 0x08 #define UART_PL01x_RSR_BE 0x04 @@ -50,14 +68,6 @@ * PL010 definitions * */ -#define UART_PL010_LCRH 0x08 /* Line control register, high byte. */ -#define UART_PL010_LCRM 0x0C /* Line control register, middle byte. */ -#define UART_PL010_LCRL 0x10 /* Line control register, low byte. */ -#define UART_PL010_CR 0x14 /* Control register. */ -#define UART_PL010_IIR 0x1C /* Interrupt indentification register (Read). */ -#define UART_PL010_ICR 0x1C /* Interrupt clear register (Write). */ -#define UART_PL010_ILPR 0x20 /* IrDA low power counter register. */ - #define UART_PL010_CR_LPE (1 << 7) #define UART_PL010_CR_RTIE (1 << 6) #define UART_PL010_CR_TIE (1 << 5) @@ -93,13 +103,6 @@ * PL011 definitions * */ -#define UART_PL011_IBRD 0x24 -#define UART_PL011_FBRD 0x28 -#define UART_PL011_LCRH 0x2C -#define UART_PL011_CR 0x30 -#define UART_PL011_IMSC 0x38 -#define UART_PL011_PERIPH_ID0 0xFE0 - #define UART_PL011_LCRH_SPS (1 << 7) #define UART_PL011_LCRH_WLEN_8 (3 << 5) #define UART_PL011_LCRH_WLEN_7 (2 << 5) -- cgit v1.1 From f177db30117d8ea8c91f30768bec6961f3285e2f Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Thu, 11 Nov 2010 15:38:01 +0100 Subject: da8xx: Add cpu_is_da8xx macros Signed-off-by: Sudhakar Rajashekhara CC: Stefano Babic CC: Detlev Zundev CC: Ben Gardiner Signed-off-by: Sandeep Paulraj --- arch/arm/include/asm/arch-davinci/hardware.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index 3520cf8..2a460b5 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -149,6 +149,7 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_DDR_EMIF_DATA_BASE 0xc0000000 #define DAVINCI_INTC_BASE 0xfffee000 #define DAVINCI_BOOTCFG_BASE 0x01c14000 +#define JTAG_ID_REG (DAVINCI_BOOTCFG_BASE + 0x18) #endif /* CONFIG_SOC_DA8XX */ @@ -442,6 +443,21 @@ struct davinci_uart_ctrl_regs { #define DAVINCI_UART_PWREMU_MGMT_URRST (1 << 13) #define DAVINCI_UART_PWREMU_MGMT_UTRST (1 << 14) +static inline int cpu_is_da830(void) +{ + unsigned int jtag_id = REG(JTAG_ID_REG); + unsigned short part_no = (jtag_id >> 12) & 0xffff; + + return ((part_no == 0xb7df) ? 1 : 0); +} +static inline int cpu_is_da850(void) +{ + unsigned int jtag_id = REG(JTAG_ID_REG); + unsigned short part_no = (jtag_id >> 12) & 0xffff; + + return ((part_no == 0xb7d1) ? 1 : 0); +} + #endif /* CONFIG_SOC_DA8XX */ #endif /* __ASM_ARCH_HARDWARE_H */ -- cgit v1.1 From b5d9791f8cdfaa069ea722b31d7755432b7fc51e Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Thu, 11 Nov 2010 15:38:02 +0100 Subject: da850: Enable SPI Flash The patch was already posted to the arago project, but not yet to mainline. It allows to save environment into the spi flash. Tested on LogiPD tmdxl138. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Stefano Babic CC: Detlev Zundev CC: Ben Gardiner Signed-off-by: Sandeep Paulraj --- arch/arm/include/asm/arch-davinci/hardware.h | 12 +++++++++++- include/configs/da850evm.h | 28 ++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index 2a460b5..21b2076 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -133,7 +133,8 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_PSC1_BASE 0x01e27000 #define DAVINCI_SPI0_BASE 0x01c41000 #define DAVINCI_USB_OTG_BASE 0x01e00000 -#define DAVINCI_SPI1_BASE 0x01e12000 +#define DAVINCI_SPI1_BASE (cpu_is_da830() ? \ + 0x01e12000 : 0x01f0e000) #define DAVINCI_GPIO_BASE 0x01e26000 #define DAVINCI_EMAC_CNTRL_REGS_BASE 0x01e23000 #define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE 0x01e22000 @@ -364,6 +365,9 @@ struct davinci_pllc_regs { #define davinci_pllc_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL0_BASE) #define DAVINCI_PLLC_DIV_MASK 0x1f +#define ASYNC3 get_async3_src() +#define PLL1_SYSCLK2 ((1 << 16) | 0x2) +#define DAVINCI_SPI1_CLKID (cpu_is_da830() ? 2 : ASYNC3) /* Clock IDs */ enum davinci_clk_ids { DAVINCI_SPI0_CLKID = 2, @@ -458,6 +462,12 @@ static inline int cpu_is_da850(void) return ((part_no == 0xb7d1) ? 1 : 0); } +static inline int get_async3_src(void) +{ + return (REG(&davinci_syscfg_regs->cfgchip3) & 0x10) ? + PLL1_SYSCLK2 : 2; +} + #endif /* CONFIG_SOC_DA8XX */ #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 4224258..f3d5a54 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -27,6 +27,7 @@ * Board */ #define CONFIG_DRIVER_TI_EMAC +#define CONFIG_USE_SPIFLASH /* * SoC Configuration @@ -71,6 +72,15 @@ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_DAVINCI_SPI +#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE +#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + /* * I2C Configuration */ @@ -115,6 +125,16 @@ #define CONFIG_NET_MULTI #endif +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE (64 << 10) +#define CONFIG_ENV_OFFSET (256 << 10) +#define CONFIG_ENV_SECT_SIZE (64 << 10) +#define CONFIG_SYS_NO_FLASH +#endif + /* * U-Boot general configuration */ @@ -179,6 +199,14 @@ #define CONFIG_CMD_UBIFS #endif +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SAVEENV +#endif + #if !defined(CONFIG_USE_NAND) && \ !defined(CONFIG_USE_NOR) && \ !defined(CONFIG_USE_SPIFLASH) -- cgit v1.1 From a63fbf6730e27134675a2edf2fb53279860d8062 Mon Sep 17 00:00:00 2001 From: Sughosh Ganu Date: Sun, 28 Nov 2010 20:21:27 -0500 Subject: Move and rename common headers from under board/davinci. Move the davinci common headers to the architecture specific include file path. Signed-off-by: Sughosh Ganu Signed-off-by: Sandeep Paulraj --- arch/arm/include/asm/arch-davinci/da8xx_common.h | 30 +++++++++++++ arch/arm/include/asm/arch-davinci/davinci_misc.h | 54 ++++++++++++++++++++++++ board/davinci/common/misc.c | 2 +- board/davinci/common/misc.h | 54 ------------------------ board/davinci/da8xxevm/common.c | 2 +- board/davinci/da8xxevm/common.h | 30 ------------- board/davinci/da8xxevm/da830evm.c | 4 +- board/davinci/da8xxevm/da850evm.c | 4 +- board/davinci/dm355evm/dm355evm.c | 2 +- board/davinci/dm355leopard/dm355leopard.c | 2 +- board/davinci/dm365evm/dm365evm.c | 2 +- board/davinci/dvevm/dvevm.c | 2 +- board/davinci/schmoogie/schmoogie.c | 2 +- board/davinci/sffsdr/sffsdr.c | 2 +- board/davinci/sonata/sonata.c | 2 +- 15 files changed, 97 insertions(+), 97 deletions(-) create mode 100644 arch/arm/include/asm/arch-davinci/da8xx_common.h create mode 100644 arch/arm/include/asm/arch-davinci/davinci_misc.h delete mode 100644 board/davinci/common/misc.h delete mode 100644 board/davinci/da8xxevm/common.h diff --git a/arch/arm/include/asm/arch-davinci/da8xx_common.h b/arch/arm/include/asm/arch-davinci/da8xx_common.h new file mode 100644 index 0000000..7ae63a6 --- /dev/null +++ b/arch/arm/include/asm/arch-davinci/da8xx_common.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __COMMON_H +#define __COMMON_H + +struct lpsc_resource { + const int lpsc_no; +}; + +void irq_init(void); +int da8xx_configure_lpsc_items(const struct lpsc_resource *item, + int n_items); + +#endif /* __COMMON_H */ diff --git a/arch/arm/include/asm/arch-davinci/davinci_misc.h b/arch/arm/include/asm/arch-davinci/davinci_misc.h new file mode 100644 index 0000000..a6ac3b9 --- /dev/null +++ b/arch/arm/include/asm/arch-davinci/davinci_misc.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2008 Lyrtech + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MISC_H +#define __MISC_H + +/* pin muxer definitions */ +#define PIN_MUX_NUM_FIELDS 8 /* Per register */ +#define PIN_MUX_FIELD_SIZE 4 /* n in bits */ +#define PIN_MUX_FIELD_MASK ((1 << PIN_MUX_FIELD_SIZE) - 1) + +/* pin definition */ +struct pinmux_config { + dv_reg *mux; /* Address of mux register */ + unsigned char value; /* Value to set in field */ + unsigned char field; /* field number */ +}; + +/* pin table definition */ +struct pinmux_resource { + const struct pinmux_config *pins; + const int n_pins; +}; + +#define PINMUX_ITEM(item) { \ + .pins = item, \ + .n_pins = ARRAY_SIZE(item) \ + } + +int dvevm_read_mac_address(uint8_t *buf); +void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr); +int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins); +int davinci_configure_pin_mux_items(const struct pinmux_resource *item, + int n_items); + +#endif /* __MISC_H */ diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index fa9dd9f..a30047b 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -29,7 +29,7 @@ #include #include #include -#include "misc.h" +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h deleted file mode 100644 index a6ac3b9..0000000 --- a/board/davinci/common/misc.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright (C) 2008 Lyrtech - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MISC_H -#define __MISC_H - -/* pin muxer definitions */ -#define PIN_MUX_NUM_FIELDS 8 /* Per register */ -#define PIN_MUX_FIELD_SIZE 4 /* n in bits */ -#define PIN_MUX_FIELD_MASK ((1 << PIN_MUX_FIELD_SIZE) - 1) - -/* pin definition */ -struct pinmux_config { - dv_reg *mux; /* Address of mux register */ - unsigned char value; /* Value to set in field */ - unsigned char field; /* field number */ -}; - -/* pin table definition */ -struct pinmux_resource { - const struct pinmux_config *pins; - const int n_pins; -}; - -#define PINMUX_ITEM(item) { \ - .pins = item, \ - .n_pins = ARRAY_SIZE(item) \ - } - -int dvevm_read_mac_address(uint8_t *buf); -void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr); -int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins); -int davinci_configure_pin_mux_items(const struct pinmux_resource *item, - int n_items); - -#endif /* __MISC_H */ diff --git a/board/davinci/da8xxevm/common.c b/board/davinci/da8xxevm/common.c index 9cd5204c..36bf693 100644 --- a/board/davinci/da8xxevm/common.c +++ b/board/davinci/da8xxevm/common.c @@ -20,7 +20,7 @@ #include #include -#include "common.h" +#include #ifndef CONFIG_USE_IRQ void irq_init(void) diff --git a/board/davinci/da8xxevm/common.h b/board/davinci/da8xxevm/common.h deleted file mode 100644 index 7ae63a6..0000000 --- a/board/davinci/da8xxevm/common.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __COMMON_H -#define __COMMON_H - -struct lpsc_resource { - const int lpsc_no; -}; - -void irq_init(void); -int da8xx_configure_lpsc_items(const struct lpsc_resource *item, - int n_items); - -#endif /* __COMMON_H */ diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c index 8a9f988..b6b7e37 100644 --- a/board/davinci/da8xxevm/da830evm.c +++ b/board/davinci/da8xxevm/da830evm.c @@ -40,8 +40,8 @@ #include #include #include -#include "../common/misc.h" -#include "common.h" +#include +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index c3267cb..8c9ff7c 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -29,8 +29,8 @@ #include #include #include -#include "../common/misc.h" -#include "common.h" +#include +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/davinci/dm355evm/dm355evm.c b/board/davinci/dm355evm/dm355evm.c index 87f284c..b9260b8 100644 --- a/board/davinci/dm355evm/dm355evm.c +++ b/board/davinci/dm355evm/dm355evm.c @@ -22,7 +22,7 @@ #include #include #include -#include "../common/misc.h" +#include #include #include diff --git a/board/davinci/dm355leopard/dm355leopard.c b/board/davinci/dm355leopard/dm355leopard.c index e89786e..0ee0d11 100644 --- a/board/davinci/dm355leopard/dm355leopard.c +++ b/board/davinci/dm355leopard/dm355leopard.c @@ -22,7 +22,7 @@ #include #include #include -#include "../common/misc.h" +#include #include #include diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c index 85dbe2a..bc681f7 100644 --- a/board/davinci/dm365evm/dm365evm.c +++ b/board/davinci/dm365evm/dm365evm.c @@ -24,7 +24,7 @@ #include #include #include -#include "../common/misc.h" +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c index 073c21a..d5c851b 100644 --- a/board/davinci/dvevm/dvevm.c +++ b/board/davinci/dvevm/dvevm.c @@ -27,7 +27,7 @@ #include #include #include -#include "../common/misc.h" +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/davinci/schmoogie/schmoogie.c b/board/davinci/schmoogie/schmoogie.c index 80a0f9f..8b615a9 100644 --- a/board/davinci/schmoogie/schmoogie.c +++ b/board/davinci/schmoogie/schmoogie.c @@ -27,7 +27,7 @@ #include #include #include -#include "../common/misc.h" +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c index 657cf2b..cc3ff7d 100644 --- a/board/davinci/sffsdr/sffsdr.c +++ b/board/davinci/sffsdr/sffsdr.c @@ -30,7 +30,7 @@ #include #include #include -#include "../common/misc.h" +#include #define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */ #define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */ diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c index 1dc42c4..c194290 100644 --- a/board/davinci/sonata/sonata.c +++ b/board/davinci/sonata/sonata.c @@ -28,7 +28,7 @@ #include #include #include -#include "../common/misc.h" +#include DECLARE_GLOBAL_DATA_PTR; -- cgit v1.1 From 3258dcae816815c996ac4eb404c6d86be08d1c79 Mon Sep 17 00:00:00 2001 From: Sughosh Ganu Date: Sun, 28 Nov 2010 20:21:58 -0500 Subject: Remove board_init_f function from nand_boot.c Remove the board_init_f function from nand_spl/nand_boot.c. This function is to be defined by all boards using the nand_spl functionality in their individual board directory. Currently this function was being used by the smdk6400 board. Added the board specific function definition. Signed-off-by: Sughosh Ganu Acked-by: Scott Wood Signed-off-by: Sandeep Paulraj --- board/samsung/smdk6400/smdk6400_nand_spl.c | 37 ++++++++++++++++++++++++++++++ nand_spl/board/samsung/smdk6400/Makefile | 6 ++++- nand_spl/nand_boot.c | 8 ------- 3 files changed, 42 insertions(+), 9 deletions(-) create mode 100644 board/samsung/smdk6400/smdk6400_nand_spl.c diff --git a/board/samsung/smdk6400/smdk6400_nand_spl.c b/board/samsung/smdk6400/smdk6400_nand_spl.c new file mode 100644 index 0000000..a023284 --- /dev/null +++ b/board/samsung/smdk6400/smdk6400_nand_spl.c @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +void board_init_f(unsigned long bootflag) +{ + relocate_code(CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, + CONFIG_SYS_TEXT_BASE); +} diff --git a/nand_spl/board/samsung/smdk6400/Makefile b/nand_spl/board/samsung/smdk6400/Makefile index 2111e57..18cee10 100644 --- a/nand_spl/board/samsung/smdk6400/Makefile +++ b/nand_spl/board/samsung/smdk6400/Makefile @@ -35,7 +35,7 @@ AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL SOBJS = start.o cpu_init.o lowlevel_init.o -COBJS = nand_boot.o nand_ecc.o s3c64xx.o +COBJS = nand_boot.o nand_ecc.o s3c64xx.o smdk6400_nand_spl.o SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) @@ -93,6 +93,10 @@ $(obj)s3c64xx.c: @rm -f $@ @ln -s $(TOPDIR)/drivers/mtd/nand/s3c64xx.c $@ +$(obj)smdk6400_nand_spl.c: + @rm -f $@ + @ln -s $(TOPDIR)/board/samsung/smdk6400/smdk6400_nand_spl.c $@ + ######################################################################### $(obj)%.o: $(obj)%.S diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index d624418..b9fd6f5 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -221,14 +221,6 @@ static int nand_load(struct mtd_info *mtd, unsigned int offs, return 0; } -#if defined(CONFIG_ARM) -void board_init_f (ulong bootflag) -{ - relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, - CONFIG_SYS_TEXT_BASE); -} -#endif - /* * The main entry for NAND booting. It's necessary that SDRAM is already * configured and available since this code loads the main U-Boot image -- cgit v1.1 From dfddb5e6ba2144610e83c6b516b14e33f82b0604 Mon Sep 17 00:00:00 2001 From: Sughosh Ganu Date: Tue, 30 Nov 2010 11:25:01 -0500 Subject: Add board support for hawkboard The patch adds basic board support for TI's OMAP-L138 based Hawkboard. This board is pretty similar to the da850 EVM. Support for nand and network access is added in this version. The following bootup procedure is used. At reset, the Rom Boot Loader(RBL), initialises the ddr and the nand controllers and copies the second stage bootloader(nand_spl) to RAM. The secondary bootloader then copies u-boot from a predefined location in the nand flash to the RAM, and passes control to the u-boot image. Three config options are supported * hawkboard_config - Used to create the u-boot.bin. Tftp the u-boot.bin image to the RAM from u-boot, and flash to the nand flash at address 0xe0000. * hawkboard_nand_config - Used to generate the secondary bootloader(nand_spl) image. This creates an elf file u-boot-spl under nand_spl/. Create an AIS signed image using this file, and flash it to the nand flash at address 0x20000. The ais file should fit in one block. * hawkboard_uart_config - This is same as the first image, but with the TEXT_BASE as expected by the RBL(0xc1080000). Create the AIS Signed-off-by: Sughosh Ganu Signed-off-by: Ben Gardiner Signed-off-by: Sandeep Paulraj --- MAINTAINERS | 5 + arch/arm/include/asm/arch-davinci/da8xx_common.h | 3 + arch/arm/include/asm/arch-davinci/hardware.h | 5 +- board/davinci/common/Makefile | 2 +- board/davinci/common/davinci_pinmux.c | 105 ++++++++++++ board/davinci/common/misc.c | 75 --------- board/davinci/da8xxevm/Makefile | 1 + board/davinci/da8xxevm/hawkboard.c | 69 ++++++++ board/davinci/da8xxevm/hawkboard_nand_spl.c | 158 +++++++++++++++++ boards.cfg | 3 + doc/README.hawkboard | 93 ++++++++++ include/configs/hawkboard.h | 206 +++++++++++++++++++++++ nand_spl/board/davinci/da8xxevm/Makefile | 141 ++++++++++++++++ nand_spl/board/davinci/da8xxevm/u-boot.lds | 75 +++++++++ nand_spl/nand_boot.c | 1 + 15 files changed, 865 insertions(+), 77 deletions(-) create mode 100644 board/davinci/common/davinci_pinmux.c create mode 100644 board/davinci/da8xxevm/hawkboard.c create mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c create mode 100644 doc/README.hawkboard create mode 100644 include/configs/hawkboard.h create mode 100644 nand_spl/board/davinci/da8xxevm/Makefile create mode 100644 nand_spl/board/davinci/da8xxevm/u-boot.lds diff --git a/MAINTAINERS b/MAINTAINERS index f47fca5..ad335bc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -853,6 +853,11 @@ Alex Z lart SA1100 dnp1110 SA1110 +Syed Mohammed Khasim +Sughosh Ganu + + hawkboard ARM926EJS (OMAP-L138) + ------------------------------------------------------------------------- Unknown / orphaned boards: diff --git a/arch/arm/include/asm/arch-davinci/da8xx_common.h b/arch/arm/include/asm/arch-davinci/da8xx_common.h index 7ae63a6..bc3092d 100644 --- a/arch/arm/include/asm/arch-davinci/da8xx_common.h +++ b/arch/arm/include/asm/arch-davinci/da8xx_common.h @@ -19,6 +19,9 @@ #ifndef __COMMON_H #define __COMMON_H +#define HAWKBOARD_KICK0_UNLOCK 0x83e70b13 +#define HAWKBOARD_KICK1_UNLOCK 0x95a4f1e0 + struct lpsc_resource { const int lpsc_no; }; diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index 21b2076..ef616c1 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -384,7 +384,10 @@ int clk_get(enum davinci_clk_ids id); /* Boot config */ struct davinci_syscfg_regs { dv_reg revid; - dv_reg rsvd[71]; + dv_reg rsvd[13]; + dv_reg kick0; + dv_reg kick1; + dv_reg rsvd1[56]; dv_reg pinmux[20]; dv_reg suspsrc; dv_reg chipsig; diff --git a/board/davinci/common/Makefile b/board/davinci/common/Makefile index 5ddb564..a1d3de2 100644 --- a/board/davinci/common/Makefile +++ b/board/davinci/common/Makefile @@ -29,7 +29,7 @@ endif LIB = $(obj)lib$(VENDOR).o -COBJS := misc.o +COBJS := misc.o davinci_pinmux.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/davinci/common/davinci_pinmux.c b/board/davinci/common/davinci_pinmux.c new file mode 100644 index 0000000..ce58f71 --- /dev/null +++ b/board/davinci/common/davinci_pinmux.c @@ -0,0 +1,105 @@ +/* + * DaVinci pinmux functions. + * + * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, + * Copyright (C) 2007 Sergey Kubushyn + * Copyright (C) 2008 Lyrtech + * Copyright (C) 2004 Texas Instruments. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +/* + * Change the setting of a pin multiplexer field. + * + * Takes an array of pinmux settings similar to: + * + * struct pinmux_config uart_pins[] = { + * { &davinci_syscfg_regs->pinmux[8], 2, 7 }, + * { &davinci_syscfg_regs->pinmux[9], 2, 0 } + * }; + * + * Stepping through the array, each pinmux[n] register has the given value + * set in the pin mux field specified. + * + * The number of pins in the array must be passed (ARRAY_SIZE can provide + * this value conveniently). + * + * Returns 0 if all field numbers and values are in the correct range, + * else returns -1. + */ +int davinci_configure_pin_mux(const struct pinmux_config *pins, + const int n_pins) +{ + int i; + + /* check for invalid pinmux values */ + for (i = 0; i < n_pins; i++) { + if (pins[i].field >= PIN_MUX_NUM_FIELDS || + (pins[i].value & ~PIN_MUX_FIELD_MASK) != 0) + return -1; + } + + /* configure the pinmuxes */ + for (i = 0; i < n_pins; i++) { + const int offset = pins[i].field * PIN_MUX_FIELD_SIZE; + const unsigned int value = pins[i].value << offset; + const unsigned int mask = PIN_MUX_FIELD_MASK << offset; + const dv_reg *mux = pins[i].mux; + + writel(value | (readl(mux) & (~mask)), mux); + } + + return 0; +} + +/* + * Configure multiple pinmux resources. + * + * Takes an pinmux_resource array of pinmux_config and pin counts: + * + * const struct pinmux_resource pinmuxes[] = { + * PINMUX_ITEM(uart_pins), + * PINMUX_ITEM(i2c_pins), + * }; + * + * The number of items in the array must be passed (ARRAY_SIZE can provide + * this value conveniently). + * + * Each item entry is configured in the defined order. If configuration + * of any item fails, -1 is returned and none of the following items are + * configured. On success, 0 is returned. + */ +int davinci_configure_pin_mux_items(const struct pinmux_resource *item, + const int n_items) +{ + int i; + + for (i = 0; i < n_items; i++) { + if (davinci_configure_pin_mux(item[i].pins, + item[i].n_pins) != 0) + return -1; + } + + return 0; +} diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index a30047b..f25ad7e 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -95,78 +95,3 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) } #endif /* DAVINCI_EMAC */ - -/* - * Change the setting of a pin multiplexer field. - * - * Takes an array of pinmux settings similar to: - * - * struct pinmux_config uart_pins[] = { - * { &davinci_syscfg_regs->pinmux[8], 2, 7 }, - * { &davinci_syscfg_regs->pinmux[9], 2, 0 } - * }; - * - * Stepping through the array, each pinmux[n] register has the given value - * set in the pin mux field specified. - * - * The number of pins in the array must be passed (ARRAY_SIZE can provide - * this value conveniently). - * - * Returns 0 if all field numbers and values are in the correct range, - * else returns -1. - */ -int davinci_configure_pin_mux(const struct pinmux_config *pins, - const int n_pins) -{ - int i; - - /* check for invalid pinmux values */ - for (i = 0; i < n_pins; i++) { - if (pins[i].field >= PIN_MUX_NUM_FIELDS || - (pins[i].value & ~PIN_MUX_FIELD_MASK) != 0) - return -1; - } - - /* configure the pinmuxes */ - for (i = 0; i < n_pins; i++) { - const int offset = pins[i].field * PIN_MUX_FIELD_SIZE; - const unsigned int value = pins[i].value << offset; - const unsigned int mask = PIN_MUX_FIELD_MASK << offset; - const dv_reg *mux = pins[i].mux; - - writel(value | (readl(mux) & (~mask)), mux); - } - - return 0; -} - -/* - * Configure multiple pinmux resources. - * - * Takes an pinmux_resource array of pinmux_config and pin counts: - * - * const struct pinmux_resource pinmuxes[] = { - * PINMUX_ITEM(uart_pins), - * PINMUX_ITEM(i2c_pins), - * }; - * - * The number of items in the array must be passed (ARRAY_SIZE can provide - * this value conveniently). - * - * Each item entry is configured in the defined order. If configuration - * of any item fails, -1 is returned and none of the following items are - * configured. On success, 0 is returned. - */ -int davinci_configure_pin_mux_items(const struct pinmux_resource *item, - const int n_items) -{ - int i; - - for (i = 0; i < n_items; i++) { - if (davinci_configure_pin_mux(item[i].pins, - item[i].n_pins) != 0) - return -1; - } - - return 0; -} diff --git a/board/davinci/da8xxevm/Makefile b/board/davinci/da8xxevm/Makefile index 88fee50..1816368 100644 --- a/board/davinci/da8xxevm/Makefile +++ b/board/davinci/da8xxevm/Makefile @@ -30,6 +30,7 @@ LIB = $(obj)lib$(BOARD).o COBJS-y += common.o COBJS-$(CONFIG_MACH_DAVINCI_DA830_EVM) += da830evm.o COBJS-$(CONFIG_MACH_DAVINCI_DA850_EVM) += da850evm.o +COBJS-$(CONFIG_MACH_DAVINCI_HAWK) += hawkboard.o COBJS := $(COBJS-y) diff --git a/board/davinci/da8xxevm/hawkboard.c b/board/davinci/da8xxevm/hawkboard.c new file mode 100644 index 0000000..b672c9d --- /dev/null +++ b/board/davinci/da8xxevm/hawkboard.c @@ -0,0 +1,69 @@ +/* + * Modified for Hawkboard - Syed Mohammed Khasim + * + * Copyright (C) 2008 Sekhar Nori, Texas Instruments, Inc. + * Copyright (C) 2007 Sergey Kubushyn + * Copyright (C) 2004 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + */ + +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_HAWKBOARD; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + return 0; +} + +int board_early_init_f(void) +{ + /* + * Kick Registers need to be set to allow access to Pin Mux registers + */ + writel(HAWKBOARD_KICK0_UNLOCK, &davinci_syscfg_regs->kick0); + writel(HAWKBOARD_KICK1_UNLOCK, &davinci_syscfg_regs->kick1); + + /* set cfgchip3 to select mii */ + writel(readl(&davinci_syscfg_regs->cfgchip3) & + ~(1 << 8), &davinci_syscfg_regs->cfgchip3); + + return 0; +} + +int misc_init_r(void) +{ + char buf[32]; + + printf("ARM Clock : %s MHz\n", + strmhz(buf, clk_get(DAVINCI_ARM_CLKID))); + + return 0; +} diff --git a/board/davinci/da8xxevm/hawkboard_nand_spl.c b/board/davinci/da8xxevm/hawkboard_nand_spl.c new file mode 100644 index 0000000..74eec13 --- /dev/null +++ b/board/davinci/da8xxevm/hawkboard_nand_spl.c @@ -0,0 +1,158 @@ +/* + * Modified for Hawkboard - Syed Mohammed Khasim + * + * Copyright (C) 2008 Sekhar Nori, Texas Instruments, Inc. + * Copyright (C) 2007 Sergey Kubushyn + * Copyright (C) 2004 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + */ + +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define pinmux(x) (&davinci_syscfg_regs->pinmux[x]) + +static const struct pinmux_config mii_pins[] = { + { pinmux(2), 8, 1 }, + { pinmux(2), 8, 2 }, + { pinmux(2), 8, 3 }, + { pinmux(2), 8, 4 }, + { pinmux(2), 8, 5 }, + { pinmux(2), 8, 6 }, + { pinmux(2), 8, 7 } +}; + +static const struct pinmux_config mdio_pins[] = { + { pinmux(4), 8, 0 }, + { pinmux(4), 8, 1 } +}; + +static const struct pinmux_config nand_pins[] = { + { pinmux(7), 1, 1 }, + { pinmux(7), 1, 2 }, + { pinmux(7), 1, 4 }, + { pinmux(7), 1, 5 }, + { pinmux(9), 1, 0 }, + { pinmux(9), 1, 1 }, + { pinmux(9), 1, 2 }, + { pinmux(9), 1, 3 }, + { pinmux(9), 1, 4 }, + { pinmux(9), 1, 5 }, + { pinmux(9), 1, 6 }, + { pinmux(9), 1, 7 }, + { pinmux(12), 1, 5 }, + { pinmux(12), 1, 6 } +}; + +static const struct pinmux_config uart2_pins[] = { + { pinmux(0), 4, 6 }, + { pinmux(0), 4, 7 }, + { pinmux(4), 2, 4 }, + { pinmux(4), 2, 5 } +}; + +static const struct pinmux_config i2c_pins[] = { + { pinmux(4), 2, 4 }, + { pinmux(4), 2, 5 } +}; + +static const struct pinmux_resource pinmuxes[] = { + PINMUX_ITEM(mii_pins), + PINMUX_ITEM(mdio_pins), + PINMUX_ITEM(i2c_pins), + PINMUX_ITEM(nand_pins), + PINMUX_ITEM(uart2_pins), +}; + +static const struct lpsc_resource lpsc[] = { + { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ + { DAVINCI_LPSC_SPI1 }, /* Serial Flash */ + { DAVINCI_LPSC_EMAC }, /* image download */ + { DAVINCI_LPSC_UART2 }, /* console */ + { DAVINCI_LPSC_GPIO }, +}; + +void board_init_f(ulong bootflag) +{ + /* + * Kick Registers need to be set to allow access to Pin Mux registers + */ + writel(HAWKBOARD_KICK0_UNLOCK, &davinci_syscfg_regs->kick0); + writel(HAWKBOARD_KICK1_UNLOCK, &davinci_syscfg_regs->kick1); + + /* setup the SUSPSRC for ARM to control emulation suspend */ + writel(readl(&davinci_syscfg_regs->suspsrc) & + ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | + DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | + DAVINCI_SYSCFG_SUSPSRC_UART2), &davinci_syscfg_regs->suspsrc); + + /* Power on required peripherals + * ARM does not have acess by default to PSC0 and PSC1 + * assuming here that the DSP bootloader has set the IOPU + * such that PSC access is available to ARM + */ + da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)); + + /* configure pinmux settings */ + davinci_configure_pin_mux_items(pinmuxes, + ARRAY_SIZE(pinmuxes)); + + writel(readl(&davinci_uart2_ctrl_regs->pwremu_mgmt) | + (DAVINCI_UART_PWREMU_MGMT_FREE) | + (DAVINCI_UART_PWREMU_MGMT_URRST) | + (DAVINCI_UART_PWREMU_MGMT_UTRST), + &davinci_uart2_ctrl_regs->pwremu_mgmt); + + NS16550_init((NS16550_t)(DAVINCI_UART2_BASE), + CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); + + puts("Nand boot...\n"); + + nand_boot(); +} + +void puts(const char *str) +{ + while (*str) + putc(*str++); +} + +void putc(char c) +{ + if (gd->flags & GD_FLG_SILENT) + return; + + if (c == '\n') + NS16550_putc((NS16550_t)(DAVINCI_UART2_BASE), '\r'); + + NS16550_putc((NS16550_t)(DAVINCI_UART2_BASE), c); +} + +void hang(void) +{ + puts("### ERROR ### Please RESET the board ###\n"); + for (;;) + ; +} diff --git a/boards.cfg b/boards.cfg index 2209676..beb5d81 100644 --- a/boards.cfg +++ b/boards.cfg @@ -76,6 +76,9 @@ pm9261 arm arm926ejs - ronetix pm9263 arm arm926ejs - ronetix at91 da830evm arm arm926ejs da8xxevm davinci davinci da850evm arm arm926ejs da8xxevm davinci davinci +hawkboard arm arm926ejs da8xxevm davinci davinci +hawkboard_nand arm arm926ejs da8xxevm davinci davinci hawkboard:NAND_U_BOOT +hawkboard_uart arm arm926ejs da8xxevm davinci davinci hawkboard:UART_U_BOOT davinci_dm355evm arm arm926ejs dm355evm davinci davinci davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci davinci_dm365evm arm arm926ejs dm365evm davinci davinci diff --git a/doc/README.hawkboard b/doc/README.hawkboard new file mode 100644 index 0000000..b7afec4 --- /dev/null +++ b/doc/README.hawkboard @@ -0,0 +1,93 @@ +Summary +======= +The README is for the boot procedure used for TI's OMAP-L138 based +hawkboard. The hawkboard comes with a 128MiB Nand flash and a 128MiB +DDR SDRAM along with a host of other controllers. + +The hawkboard is booted in three stages. The initial bootloader which +executes upon reset is the Rom Boot Loader(RBL) which sits in the +internal ROM of the omap. The RBL initialises the memory and the nand +controller, and copies the image stored at a predefined location(block +1) of the nand flash. The image loaded by the RBL to the memory is the +AIS signed nand_spl image. This, in turns copies the u-boot binary +from the nand flash to the memory and jumps to the u-boot entry point. + +AIS is an image format defined by TI for the images that are to be +loaded to memory by the RBL. The image is divided into a series of +sections and the image's entry point is specified. Each section comes +with meta data like the target address the section is to be copied to +and the size of the section, which is used by the RBL to load the +image. At the end of the image the RBL jumps to the image entry +point. + +The secondary stage bootloader(nand_spl) which is loaded by the RBL +then loads the u-boot from a predefined location in the nand to the +memory and jumps to the u-boot entry point. + +The reason a secondary stage bootloader is used is because the ECC +layout expected by the RBL is not the same as that used by +u-boot/linux. This also implies that for flashing the nand_spl image, +we need to use the u-boot which uses the ECC layout expected by the +RBL[1]. Booting u-boot over UART(UART boot) is explained here[2]. + + +Compilation +=========== +Three images might be needed + +* nand_spl - This is the secondary bootloader which boots the u-boot + binary. + + hawkboard_nand_config + + The nand_spl ELF gets generated under nand_spl/u-boot-spl. This + needs to be processed with the AISGen tool for generating the AIS + signed image to be flashed. Steps for generating the AIS image are + explained here[3]. + +* u-boot binary - This is the image flashed to the nand and copied to + the memory by the nand_spl. + + hawkboard_config + +* u-boot for uart boot - This is same as the u-boot binary generated + above, with the sole difference of the CONFIG_SYS_TEXT_BASE being + 0xc1080000, as expected by the RBL. + + hawkboard_uart_config + + +Flashing the images to Nand +=========================== +The nand_spl AIS image needs to be flashed to the block 1 of the +Nand flash, as that is the location the RBL expects the image[4]. For +flashing the nand_spl, boot over the u-boot specified in [1], and +flash the image + +=> tftpboot 0xc0700000 +=> nand erase 0x20000 0x20000 +=> nand write.e 0xc0700000 0x20000 + +The u-boot binary is flashed at location 0xe0000(block 6) of the nand +flash. The nand_spl loader expects the u-boot at this location. For +flashing the u-boot binary + +=> tftpboot 0xc0700000 u-boot.bin +=> nand erase 0xe0000 0x40000 +=> nand write.e 0xc0700000 0xe0000 + + +Links +===== + +[1] + http://code.google.com/p/hawkboard/downloads/detail?name=u-boot_uart_ais_v1.bin + +[2] + http://elinux.org/Hawkboard#Booting_u-boot_over_UART + +[3] + http://elinux.org/Hawkboard#Signing_u-boot_for_UART_boot + +[4] + http://processors.wiki.ti.com/index.php/RBL_UBL_and_host_program#RBL_booting_from_NAND_and_ECC.2FBad_blocks diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h new file mode 100644 index 0000000..23a88d0 --- /dev/null +++ b/include/configs/hawkboard.h @@ -0,0 +1,206 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Board + */ +#define CONFIG_SYS_USE_NAND 1 + +/* + * SoC Configuration + */ +#define CONFIG_MACH_DAVINCI_HAWK +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) +#define CONFIG_SYS_OSCIN_FREQ 24000000 +#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F + +#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_UART_U_BOOT) +#define CONFIG_SYS_TEXT_BASE 0xc1080000 +#else +#define CONFIG_SYS_TEXT_BASE 0xc1180000 +#endif + +/* + * Memory Info + */ +#define CONFIG_SYS_MALLOC_LEN (1*1024*1024) /* malloc() len */ +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE +#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ +#define CONFIG_SYS_SDRAM_BASE 0xc0000000 +#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 -\ + GENERATED_GBL_DATA_SIZE) + +/* memtest start addr */ +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) + +/* memtest will be run on 16MB */ +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ + +/* + * Serial Driver info + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Network & Ethernet Configuration + */ +#define CONFIG_EMAC_MDIO_PHY_NUM 0x7 +#if !defined(CONFIG_NAND_SPL) +#define CONFIG_DRIVER_TI_EMAC +#endif +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI + +/* + * Nand Flash + */ +#ifdef CONFIG_SYS_USE_NAND +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE +#define CONFIG_CLE_MASK 0x10 +#define CONFIG_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CFG_DAVINCI_STD_NAND_LAYOUT +#define CONFIG_SYS_NAND_CS 3 +#define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +/* Max number of NAND devices */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE_LIST { 0x62000000, } +#define NAND_MAX_CHIPS 1 +/* Block 0--not used by bootcode */ +#define CONFIG_ENV_OFFSET 0x0 + +#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0xe0000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1180000 +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST +#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ + CONFIG_SYS_NAND_U_BOOT_SIZE - \ + CONFIG_SYS_MALLOC_LEN - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_NAND_ECCPOS { \ + 24, 25, 26, 27, 28, \ + 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ + 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ + 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ + 59, 60, 61, 62, 63 } +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 10 +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) +#endif /* CONFIG_SYS_USE_NAND */ + +/* + * U-Boot general configuration + */ +#define CONFIG_MISC_INIT_R +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "hawkboard > " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* + * Linux Information + */ +#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS \ + "mem=128M console=ttyS2,115200n8 root=/dev/ram0 rw initrd=0xc1180000,"\ + "4M ip=static" +#define CONFIG_BOOTDELAY 3 + +/* + * U-Boot commands + */ +#include +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY + +#ifdef CONFIG_SYS_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#endif + +#ifndef CONFIG_DRIVER_TI_EMAC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PING +#endif + +#endif /* __CONFIG_H */ diff --git a/nand_spl/board/davinci/da8xxevm/Makefile b/nand_spl/board/davinci/da8xxevm/Makefile new file mode 100644 index 0000000..6102675 --- /dev/null +++ b/nand_spl/board/davinci/da8xxevm/Makefile @@ -0,0 +1,141 @@ +# +# (C) Copyright 2006-2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +CONFIG_NAND_SPL = y + +include $(TOPDIR)/config.mk + +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL +CFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL + +SOBJS = start.o _udivsi3.o _divsi3.o +COBJS = cpu.o davinci_nand.o ns16550.o div0.o davinci_pinmux.o psc.o \ + common.o hawkboard_nand_spl.o nand_boot.o + +SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS := $(SOBJS) $(COBJS) +LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR) + +nandobj := $(OBJTREE)/nand_spl/ + +ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin \ + $(nandobj)u-boot-spl-16k.bin + +all: $(ALL) + +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds + cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ + -Map $(nandobj)u-boot-spl.map \ + -o $(nandobj)u-boot-spl + +$(nandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + +# create symbolic links for common files + +# from board directory +$(obj)davinci_pinmux.c: + @rm -f $@ + @ln -s $(TOPDIR)/board/davinci/common/davinci_pinmux.c $@ + +# from drivers/mtd/nand directory +$(obj)davinci_nand.c: + @rm -f $@ + @ln -s $(TOPDIR)/drivers/mtd/nand/davinci_nand.c $@ + +# from nand_spl directory +$(obj)nand_boot.c: + @rm -f $@ + @ln -s $(TOPDIR)/nand_spl/nand_boot.c $@ + +# from drivers/serial directory +$(obj)ns16550.c: + @rm -f $@ + @ln -sf $(TOPDIR)/drivers/serial/ns16550.c $@ + +# from cpu directory +$(obj)start.S: + @rm -f $@ + ln -s $(TOPDIR)/arch/arm/cpu/arm926ejs/start.S $@ + +# from lib directory +$(obj)_udivsi3.S: + @rm -f $@ + ln -s $(TOPDIR)/arch/arm/lib/_udivsi3.S $@ + +# from lib directory +$(obj)_divsi3.S: + @rm -f $@ + ln -s $(TOPDIR)/arch/arm/lib/_divsi3.S $@ + +# from lib directory +$(obj)div0.c: + @rm -f $@ + ln -s $(TOPDIR)/arch/arm/lib/div0.c $@ + +# from SoC directory +$(obj)cpu.c: + @rm -f $@ + @ln -s $(TOPDIR)/arch/arm/cpu/arm926ejs/davinci/cpu.c $@ + +# from board directory +$(obj)hawkboard_nand_spl.c: + @rm -f $@ + ln -s $(TOPDIR)/board/davinci/da8xxevm/hawkboard_nand_spl.c $@ + +# from board directory +$(obj)common.c: + @rm -f $@ + ln -s $(TOPDIR)/board/davinci/da8xxevm/common.c $@ + +$(obj)psc.c: + @rm -f $@ + ln -s $(TOPDIR)/arch/arm/cpu/arm926ejs/davinci/psc.c $@ + + +######################################################################### + +$(obj)%.o: $(obj)%.S + $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o: $(obj)%.c + $(CC) $(CFLAGS) -c -o $@ $< + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/nand_spl/board/davinci/da8xxevm/u-boot.lds b/nand_spl/board/davinci/da8xxevm/u-boot.lds new file mode 100644 index 0000000..f6ccf08 --- /dev/null +++ b/nand_spl/board/davinci/da8xxevm/u-boot.lds @@ -0,0 +1,75 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0xc1080000; + + . = ALIGN(4); + .text : + { + start.o (.text) + cpu.o (.text) + nand_boot.o (.text) + + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { + *(.data) + __datarel_start = .; + *(.data.rel) + __datarelrolocal_start = .; + *(.data.rel.ro.local) + __datarellocal_start = .; + *(.data.rel.local) + __datarelro_start = .; + *(.data.rel.ro) + } + + . = ALIGN(4); + __rel_dyn_start = .; + __rel_dyn_end = .; + __dynsym_start = .; + + __got_start = .; + . = ALIGN(4); + .got : { *(.got) } + + __got_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index b9fd6f5..76b8566 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -236,6 +236,7 @@ void nand_boot(void) /* * Init board specific nand support */ + nand_chip.select_chip = NULL; nand_info.priv = &nand_chip; nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE; nand_chip.dev_ready = NULL; /* preset to NULL */ -- cgit v1.1 From df48676aea313fdaeef0b356dfde386b656e152d Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Thu, 18 Nov 2010 09:59:37 -0500 Subject: da850: Add RMII support for EMAC This patch is a port of the work by Sudhakar Rajeshekhara in commit ab3effbcad8851cc65dc5241a01c064d2030a3b2 of git://arago-project.org/git/people/sandeep/u-boot-davinci.git. The da850 UI board has on it an RMII PHY which can be used if the MDC line to the MII PHY on the baseboard is disabled and the RMII PHY is enabled by configuring the values of some GPIO pins on the IO expander of the UI board. This patch implements disabling that line via GPIO2[6], configuring the UI board's IO expander and setting only the pinmux settings that are needed for RMII operation. Tested on da850evm by adding a define for CONFIG_DRIVER_TI_EMAC_USE_RMII. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Ben Gardiner CC: Sandeep Paulraj CC: Ben Warren CC: Mike Frysinger CC: Sughosh Ganu Signed-off-by: Sandeep Paulraj --- arch/arm/include/asm/arch-davinci/da8xx_common.h | 4 + arch/arm/include/asm/arch-davinci/hardware.h | 4 + board/davinci/da8xxevm/common.c | 14 +++ board/davinci/da8xxevm/da850evm.c | 112 ++++++++++++++++++++++- drivers/net/davinci_emac.c | 41 ++++++++- include/configs/da850evm.h | 1 + 6 files changed, 171 insertions(+), 5 deletions(-) diff --git a/arch/arm/include/asm/arch-davinci/da8xx_common.h b/arch/arm/include/asm/arch-davinci/da8xx_common.h index bc3092d..e52f613 100644 --- a/arch/arm/include/asm/arch-davinci/da8xx_common.h +++ b/arch/arm/include/asm/arch-davinci/da8xx_common.h @@ -30,4 +30,8 @@ void irq_init(void); int da8xx_configure_lpsc_items(const struct lpsc_resource *item, int n_items); +#if defined(CONFIG_DRIVER_TI_EMAC) && defined(CONFIG_MACH_DAVINCI_DA850_EVM) +void da850_emac_mii_mode_sel(int mode_sel); +#endif + #endif /* __COMMON_H */ diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index ef616c1..b95fa97 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -152,6 +152,10 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_BOOTCFG_BASE 0x01c14000 #define JTAG_ID_REG (DAVINCI_BOOTCFG_BASE + 0x18) +#define GPIO_BANK2_REG_DIR_ADDR (DAVINCI_GPIO_BASE + 0x38) +#define GPIO_BANK2_REG_OPDATA_ADDR (DAVINCI_GPIO_BASE + 0x3c) +#define GPIO_BANK2_REG_SET_ADDR (DAVINCI_GPIO_BASE + 0x40) +#define GPIO_BANK2_REG_CLR_ADDR (DAVINCI_GPIO_BASE + 0x44) #endif /* CONFIG_SOC_DA8XX */ /* Power and Sleep Controller (PSC) Domains */ diff --git a/board/davinci/da8xxevm/common.c b/board/davinci/da8xxevm/common.c index 36bf693..2d9a64b 100644 --- a/board/davinci/da8xxevm/common.c +++ b/board/davinci/da8xxevm/common.c @@ -53,3 +53,17 @@ int da8xx_configure_lpsc_items(const struct lpsc_resource *item, return 0; } + +#if defined(CONFIG_DRIVER_TI_EMAC) && defined(CONFIG_MACH_DAVINCI_DA850_EVM) +void da850_emac_mii_mode_sel(int mode_sel) +{ + int val; + + val = readl(&davinci_syscfg_regs->cfgchip3); + if (mode_sel == 0) + val &= ~(1 << 8); + else + val |= (1 << 8); + writel(val, &davinci_syscfg_regs->cfgchip3); +} +#endif diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 8c9ff7c..291757c 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -54,6 +54,15 @@ static const struct pinmux_config uart_pins[] = { #ifdef CONFIG_DRIVER_TI_EMAC static const struct pinmux_config emac_pins[] = { +#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII + { pinmux(14), 8, 2 }, + { pinmux(14), 8, 3 }, + { pinmux(14), 8, 4 }, + { pinmux(14), 8, 5 }, + { pinmux(14), 8, 6 }, + { pinmux(14), 8, 7 }, + { pinmux(15), 8, 1 }, +#else /* ! CONFIG_DRIVER_TI_EMAC_USE_RMII */ { pinmux(2), 8, 1 }, { pinmux(2), 8, 2 }, { pinmux(2), 8, 3 }, @@ -69,10 +78,10 @@ static const struct pinmux_config emac_pins[] = { { pinmux(3), 8, 5 }, { pinmux(3), 8, 6 }, { pinmux(3), 8, 7 }, +#endif /* CONFIG_DRIVER_TI_EMAC_USE_RMII */ { pinmux(4), 8, 0 }, { pinmux(4), 8, 1 } }; -#endif /* CONFIG_DRIVER_TI_EMAC */ /* I2C pin muxer settings */ static const struct pinmux_config i2c_pins[] = { @@ -99,6 +108,13 @@ const struct pinmux_config nand_pins[] = { }; #endif +#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII +#define HAS_RMII 1 +#else +#define HAS_RMII 0 +#endif +#endif /* CONFIG_DRIVER_TI_EMAC */ + static const struct pinmux_resource pinmuxes[] = { #ifdef CONFIG_SPI_FLASH PINMUX_ITEM(spi1_pins), @@ -203,9 +219,8 @@ int board_init(void) #ifdef CONFIG_DRIVER_TI_EMAC if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0) return 1; - /* set cfgchip3 to select MII */ - writel(readl(&davinci_syscfg_regs->cfgchip3) & ~(1 << 8), - &davinci_syscfg_regs->cfgchip3); + + da850_emac_mii_mode_sel(HAS_RMII); #endif /* CONFIG_DRIVER_TI_EMAC */ /* enable the console UART */ @@ -218,11 +233,100 @@ int board_init(void) #ifdef CONFIG_DRIVER_TI_EMAC +#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII +/** + * rmii_hw_init + * + * DA850/OMAP-L138 EVM can interface to a daughter card for + * additional features. This card has an I2C GPIO Expander TCA6416 + * to select the required functions like camera, RMII Ethernet, + * character LCD, video. + * + * Initialization of the expander involves configuring the + * polarity and direction of the ports. P07-P05 are used here. + * These ports are connected to a Mux chip which enables only one + * functionality at a time. + * + * For RMII phy to respond, the MII MDIO clock has to be disabled + * since both the PHY devices have address as zero. The MII MDIO + * clock is controlled via GPIO2[6]. + * + * This code is valid for Beta version of the hardware + */ +int rmii_hw_init(void) +{ + const struct pinmux_config gpio_pins[] = { + { pinmux(6), 8, 1 } + }; + u_int8_t buf[2]; + unsigned int temp; + int ret; + + /* PinMux for GPIO */ + if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0) + return 1; + + /* I2C Exapnder configuration */ + /* Set polarity to non-inverted */ + buf[0] = 0x0; + buf[1] = 0x0; + ret = i2c_write(CONFIG_SYS_I2C_EXPANDER_ADDR, 4, 1, buf, 2); + if (ret) { + printf("\nExpander @ 0x%02x write FAILED!!!\n", + CONFIG_SYS_I2C_EXPANDER_ADDR); + return ret; + } + + /* Configure P07-P05 as outputs */ + buf[0] = 0x1f; + buf[1] = 0xff; + ret = i2c_write(CONFIG_SYS_I2C_EXPANDER_ADDR, 6, 1, buf, 2); + if (ret) { + printf("\nExpander @ 0x%02x write FAILED!!!\n", + CONFIG_SYS_I2C_EXPANDER_ADDR); + } + + /* For Ethernet RMII selection + * P07(SelA)=0 + * P06(SelB)=1 + * P05(SelC)=1 + */ + if (i2c_read(CONFIG_SYS_I2C_EXPANDER_ADDR, 2, 1, buf, 1)) { + printf("\nExpander @ 0x%02x read FAILED!!!\n", + CONFIG_SYS_I2C_EXPANDER_ADDR); + } + + buf[0] &= 0x1f; + buf[0] |= (0 << 7) | (1 << 6) | (1 << 5); + if (i2c_write(CONFIG_SYS_I2C_EXPANDER_ADDR, 2, 1, buf, 1)) { + printf("\nExpander @ 0x%02x write FAILED!!!\n", + CONFIG_SYS_I2C_EXPANDER_ADDR); + } + + /* Set the output as high */ + temp = REG(GPIO_BANK2_REG_SET_ADDR); + temp |= (0x01 << 6); + REG(GPIO_BANK2_REG_SET_ADDR) = temp; + + /* Set the GPIO direction as output */ + temp = REG(GPIO_BANK2_REG_DIR_ADDR); + temp &= ~(0x01 << 6); + REG(GPIO_BANK2_REG_DIR_ADDR) = temp; + + return 0; +} +#endif /* CONFIG_DRIVER_TI_EMAC_USE_RMII */ + /* * Initializes on-board ethernet controllers. */ int board_eth_init(bd_t *bis) { +#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII + /* Select RMII fucntion through the expander */ + if (rmii_hw_init()) + printf("RMII hardware init failed!!!\n"); +#endif if (!davinci_emac_initialize()) { printf("Error: Ethernet init failed!\n"); return -1; diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index e06896f..43a3d79 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -243,8 +243,35 @@ static int gen_get_link_speed(int phy_addr) { u_int16_t tmp; - if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04)) + if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && + (tmp & 0x04)) { +#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ + defined(CONFIG_MACH_DAVINCI_DA850_EVM) + davinci_eth_phy_read(phy_addr, PHY_ANLPAR, &tmp); + + /* Speed doesn't matter, there is no setting for it in EMAC. */ + if (tmp & (PHY_ANLPAR_TXFD | PHY_ANLPAR_10FD)) { + /* set EMAC for Full Duplex */ + writel(EMAC_MACCONTROL_MIIEN_ENABLE | + EMAC_MACCONTROL_FULLDUPLEX_ENABLE, + &adap_emac->MACCONTROL); + } else { + /*set EMAC for Half Duplex */ + writel(EMAC_MACCONTROL_MIIEN_ENABLE, + &adap_emac->MACCONTROL); + } + + if (tmp & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) + writel(readl(&adap_emac->MACCONTROL) | + EMAC_MACCONTROL_RMIISPEED_100, + &adap_emac->MACCONTROL); + else + writel(readl(&adap_emac->MACCONTROL) & + ~EMAC_MACCONTROL_RMIISPEED_100, + &adap_emac->MACCONTROL); +#endif return(1); + } return(0); } @@ -326,6 +353,12 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis) } #endif +#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ + defined(CONFIG_MACH_DAVINCI_DA850_EVM) + adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0; + adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0; + adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0; +#endif rx_desc = emac_rx_desc; writel(1, &adap_emac->TXCONTROL); @@ -480,6 +513,12 @@ static void davinci_eth_close(struct eth_device *dev) writel(0, &adap_ewrap->EWCTL); #endif +#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ + defined(CONFIG_MACH_DAVINCI_DA850_EVM) + adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0; + adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0; + adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0; +#endif debug_emac("- emac_close\n"); } diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index f3d5a54..bbb5a9b 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -88,6 +88,7 @@ #define CONFIG_DRIVER_DAVINCI_I2C #define CONFIG_SYS_I2C_SPEED 25000 #define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 /* * Flash & Environment -- cgit v1.1 From a2f2eb76e44d9b9be50eb3672558d7267e177315 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Tue, 30 Nov 2010 11:32:10 -0500 Subject: Davinci 8xx: Move common functions to share code As more Davinci 8xx board can be added, move common code to be shared between boards. * rebased ontop of Sugosh's patches * moving the HAWKBOARD_KICK{0,1}_UNLOCK defines to arch/arm/include/asm/arch-davinci/davinci_misc.h from to arch/arm/include/asm/arch-davinci/da8xx_common.h * don't define dram functions in PRELOADER * move sync_env_enetaddr into existing EMAC ifdef * use misc.c in hawkboard nand_spl Signed-off-by: Ben Gardiner Signed-off-by: Stefano Babic Signed-off-by: Sandeep Paulraj --- arch/arm/include/asm/arch-davinci/da8xx_common.h | 37 ------------- arch/arm/include/asm/arch-davinci/davinci_misc.h | 15 ++++++ board/davinci/common/misc.c | 54 ++++++++++++++++++- board/davinci/da8xxevm/Makefile | 1 - board/davinci/da8xxevm/common.c | 69 ------------------------ board/davinci/da8xxevm/da830evm.c | 1 - board/davinci/da8xxevm/da850evm.c | 3 +- board/davinci/da8xxevm/hawkboard.c | 1 - board/davinci/da8xxevm/hawkboard_nand_spl.c | 1 - nand_spl/board/davinci/da8xxevm/Makefile | 6 +-- 10 files changed, 72 insertions(+), 116 deletions(-) delete mode 100644 arch/arm/include/asm/arch-davinci/da8xx_common.h delete mode 100644 board/davinci/da8xxevm/common.c diff --git a/arch/arm/include/asm/arch-davinci/da8xx_common.h b/arch/arm/include/asm/arch-davinci/da8xx_common.h deleted file mode 100644 index e52f613..0000000 --- a/arch/arm/include/asm/arch-davinci/da8xx_common.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __COMMON_H -#define __COMMON_H - -#define HAWKBOARD_KICK0_UNLOCK 0x83e70b13 -#define HAWKBOARD_KICK1_UNLOCK 0x95a4f1e0 - -struct lpsc_resource { - const int lpsc_no; -}; - -void irq_init(void); -int da8xx_configure_lpsc_items(const struct lpsc_resource *item, - int n_items); - -#if defined(CONFIG_DRIVER_TI_EMAC) && defined(CONFIG_MACH_DAVINCI_DA850_EVM) -void da850_emac_mii_mode_sel(int mode_sel); -#endif - -#endif /* __COMMON_H */ diff --git a/arch/arm/include/asm/arch-davinci/davinci_misc.h b/arch/arm/include/asm/arch-davinci/davinci_misc.h index a6ac3b9..347aa89 100644 --- a/arch/arm/include/asm/arch-davinci/davinci_misc.h +++ b/arch/arm/include/asm/arch-davinci/davinci_misc.h @@ -45,10 +45,25 @@ struct pinmux_resource { .n_pins = ARRAY_SIZE(item) \ } +#define HAWKBOARD_KICK0_UNLOCK 0x83e70b13 +#define HAWKBOARD_KICK1_UNLOCK 0x95a4f1e0 + +struct lpsc_resource { + const int lpsc_no; +}; + int dvevm_read_mac_address(uint8_t *buf); void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr); int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins); int davinci_configure_pin_mux_items(const struct pinmux_resource *item, int n_items); +#if defined(CONFIG_DRIVER_TI_EMAC) && defined(CONFIG_MACH_DAVINCI_DA850_EVM) +void davinci_emac_mii_mode_sel(int mode_sel); +#endif +#if defined(CONFIG_SOC_DA8XX) +void irq_init(void); +int da8xx_configure_lpsc_items(const struct lpsc_resource *item, + const int n_items); +#endif #endif /* __MISC_H */ diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index f25ad7e..08c898f 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -33,6 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; +#ifndef CONFIG_PRELOADER int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -47,6 +48,7 @@ void dram_init_banksize(void) gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; gd->bd->bi_dram[0].size = gd->ram_size; } +#endif #ifdef CONFIG_DRIVER_TI_EMAC @@ -76,6 +78,22 @@ err: } /* + * Set the mii mode as MII or RMII + */ +#if defined(CONFIG_DRIVER_TI_EMAC) +void davinci_emac_mii_mode_sel(int mode_sel) +{ + int val; + + val = readl(&davinci_syscfg_regs->cfgchip3); + if (mode_sel == 0) + val &= ~(1 << 8); + else + val |= (1 << 8); + writel(val, &davinci_syscfg_regs->cfgchip3); +} +#endif +/* * If there is no MAC address in the environment, then it will be initialized * (silently) from the value in the EEPROM. */ @@ -94,4 +112,38 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) } } -#endif /* DAVINCI_EMAC */ +#endif /* CONFIG_DRIVER_TI_EMAC */ + +#if defined(CONFIG_SOC_DA8XX) +#ifndef CONFIG_USE_IRQ +void irq_init(void) +{ + /* + * Mask all IRQs by clearing the global enable and setting + * the enable clear for all the 90 interrupts. + */ + + writel(0, &davinci_aintc_regs->ger); + + writel(0, &davinci_aintc_regs->hier); + + writel(0xffffffff, &davinci_aintc_regs->ecr1); + writel(0xffffffff, &davinci_aintc_regs->ecr2); + writel(0xffffffff, &davinci_aintc_regs->ecr3); +} +#endif + +/* + * Enable PSC for various peripherals. + */ +int da8xx_configure_lpsc_items(const struct lpsc_resource *item, + const int n_items) +{ + int i; + + for (i = 0; i < n_items; i++) + lpsc_on(item[i].lpsc_no); + + return 0; +} +#endif diff --git a/board/davinci/da8xxevm/Makefile b/board/davinci/da8xxevm/Makefile index 1816368..c1b2119 100644 --- a/board/davinci/da8xxevm/Makefile +++ b/board/davinci/da8xxevm/Makefile @@ -27,7 +27,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS-y += common.o COBJS-$(CONFIG_MACH_DAVINCI_DA830_EVM) += da830evm.o COBJS-$(CONFIG_MACH_DAVINCI_DA850_EVM) += da850evm.o COBJS-$(CONFIG_MACH_DAVINCI_HAWK) += hawkboard.o diff --git a/board/davinci/da8xxevm/common.c b/board/davinci/da8xxevm/common.c deleted file mode 100644 index 2d9a64b..0000000 --- a/board/davinci/da8xxevm/common.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Miscellaneous DA8XX functions. - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include - -#ifndef CONFIG_USE_IRQ -void irq_init(void) -{ - /* - * Mask all IRQs by clearing the global enable and setting - * the enable clear for all the 90 interrupts. - */ - - writel(0, &davinci_aintc_regs->ger); - - writel(0, &davinci_aintc_regs->hier); - - writel(0xffffffff, &davinci_aintc_regs->ecr1); - writel(0xffffffff, &davinci_aintc_regs->ecr2); - writel(0xffffffff, &davinci_aintc_regs->ecr3); -} -#endif - -/* - * Enable PSC for various peripherals. - */ -int da8xx_configure_lpsc_items(const struct lpsc_resource *item, - const int n_items) -{ - int i; - - for (i = 0; i < n_items; i++) - lpsc_on(item[i].lpsc_no); - - return 0; -} - -#if defined(CONFIG_DRIVER_TI_EMAC) && defined(CONFIG_MACH_DAVINCI_DA850_EVM) -void da850_emac_mii_mode_sel(int mode_sel) -{ - int val; - - val = readl(&davinci_syscfg_regs->cfgchip3); - if (mode_sel == 0) - val &= ~(1 << 8); - else - val |= (1 << 8); - writel(val, &davinci_syscfg_regs->cfgchip3); -} -#endif diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c index b6b7e37..0650653 100644 --- a/board/davinci/da8xxevm/da830evm.c +++ b/board/davinci/da8xxevm/da830evm.c @@ -41,7 +41,6 @@ #include #include #include -#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 291757c..b088c9c 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -30,7 +30,6 @@ #include #include #include -#include DECLARE_GLOBAL_DATA_PTR; @@ -220,7 +219,7 @@ int board_init(void) if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0) return 1; - da850_emac_mii_mode_sel(HAS_RMII); + davinci_emac_mii_mode_sel(HAS_RMII); #endif /* CONFIG_DRIVER_TI_EMAC */ /* enable the console UART */ diff --git a/board/davinci/da8xxevm/hawkboard.c b/board/davinci/da8xxevm/hawkboard.c index b672c9d..f34830e 100644 --- a/board/davinci/da8xxevm/hawkboard.c +++ b/board/davinci/da8xxevm/hawkboard.c @@ -28,7 +28,6 @@ #include #include #include -#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/davinci/da8xxevm/hawkboard_nand_spl.c b/board/davinci/da8xxevm/hawkboard_nand_spl.c index 74eec13..9155236 100644 --- a/board/davinci/da8xxevm/hawkboard_nand_spl.c +++ b/board/davinci/da8xxevm/hawkboard_nand_spl.c @@ -28,7 +28,6 @@ #include #include #include -#include DECLARE_GLOBAL_DATA_PTR; diff --git a/nand_spl/board/davinci/da8xxevm/Makefile b/nand_spl/board/davinci/da8xxevm/Makefile index 6102675..4cae223 100644 --- a/nand_spl/board/davinci/da8xxevm/Makefile +++ b/nand_spl/board/davinci/da8xxevm/Makefile @@ -35,7 +35,7 @@ CFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL SOBJS = start.o _udivsi3.o _divsi3.o COBJS = cpu.o davinci_nand.o ns16550.o div0.o davinci_pinmux.o psc.o \ - common.o hawkboard_nand_spl.o nand_boot.o + misc.o hawkboard_nand_spl.o nand_boot.o SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) @@ -116,9 +116,9 @@ $(obj)hawkboard_nand_spl.c: ln -s $(TOPDIR)/board/davinci/da8xxevm/hawkboard_nand_spl.c $@ # from board directory -$(obj)common.c: +$(obj)misc.c: @rm -f $@ - ln -s $(TOPDIR)/board/davinci/da8xxevm/common.c $@ + ln -s $(TOPDIR)/board/davinci/common/misc.c $@ $(obj)psc.c: @rm -f $@ -- cgit v1.1 From 76bfe76b54511764e0a49287699190a0a3347ee4 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Tue, 30 Nov 2010 11:46:56 -0500 Subject: Davinci: add support for the ea20 board This board uses the OMAP-L138 SOM stacked on a custom baseboard. It supports SPI Flash, Ethernet with RMII. Signed-off-by: Stefano Babic Signed-off-by: Ben Gardiner Signed-off-by: Sandeep Paulraj --- MAINTAINERS | 1 + board/davinci/ea20/Makefile | 53 ++++++++++++ board/davinci/ea20/ea20.c | 196 ++++++++++++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/ea20.h | 192 +++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 443 insertions(+) create mode 100644 board/davinci/ea20/Makefile create mode 100644 board/davinci/ea20/ea20.c create mode 100644 include/configs/ea20.h diff --git a/MAINTAINERS b/MAINTAINERS index ad335bc..986e0dc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -549,6 +549,7 @@ Rowel Atienza Stefano Babic + ea20 davinci polaris xscale trizepsiv xscale mx51evk i.MX51 diff --git a/board/davinci/ea20/Makefile b/board/davinci/ea20/Makefile new file mode 100644 index 0000000..ddd2564 --- /dev/null +++ b/board/davinci/ea20/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += ea20.o + +COBJS := $(COBJS-y) + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak *~ .depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c new file mode 100644 index 0000000..9d0f71b --- /dev/null +++ b/board/davinci/ea20/ea20.c @@ -0,0 +1,196 @@ +/* + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * Based on da850evm.c, original Copyrights follow: + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on da830evm.c. Original Copyrights follow: + * + * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. + * Copyright (C) 2007 Sergey Kubushyn + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define pinmux(x) (&davinci_syscfg_regs->pinmux[x]) + +/* SPI0 pin muxer settings */ +static const struct pinmux_config spi1_pins[] = { + { pinmux(5), 1, 1 }, + { pinmux(5), 1, 2 }, + { pinmux(5), 1, 4 }, + { pinmux(5), 1, 5 } +}; + +/* UART pin muxer settings */ +static const struct pinmux_config uart_pins[] = { + { pinmux(0), 4, 6 }, + { pinmux(0), 4, 7 }, + { pinmux(4), 2, 4 }, + { pinmux(4), 2, 5 } +}; + +#ifdef CONFIG_DRIVER_TI_EMAC +#define HAS_RMII 1 +static const struct pinmux_config emac_pins[] = { + { pinmux(14), 8, 2 }, + { pinmux(14), 8, 3 }, + { pinmux(14), 8, 4 }, + { pinmux(14), 8, 5 }, + { pinmux(14), 8, 6 }, + { pinmux(14), 8, 7 }, + { pinmux(15), 8, 1 }, + { pinmux(4), 8, 0 }, + { pinmux(4), 8, 1 } +}; +#endif + +#ifdef CONFIG_NAND_DAVINCI +const struct pinmux_config nand_pins[] = { + { pinmux(7), 1, 1 }, + { pinmux(7), 1, 2 }, + { pinmux(7), 1, 4 }, + { pinmux(7), 1, 5 }, + { pinmux(9), 1, 0 }, + { pinmux(9), 1, 1 }, + { pinmux(9), 1, 2 }, + { pinmux(9), 1, 3 }, + { pinmux(9), 1, 4 }, + { pinmux(9), 1, 5 }, + { pinmux(9), 1, 6 }, + { pinmux(9), 1, 7 }, + { pinmux(12), 1, 5 }, + { pinmux(12), 1, 6 } +}; +#endif + +static const struct pinmux_resource pinmuxes[] = { +#ifdef CONFIG_SPI_FLASH + PINMUX_ITEM(spi1_pins), +#endif + PINMUX_ITEM(uart_pins), +#ifdef CONFIG_NAND_DAVINCI + PINMUX_ITEM(nand_pins), +#endif +}; + +static const struct lpsc_resource lpsc[] = { + { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ + { DAVINCI_LPSC_SPI1 }, /* Serial Flash */ + { DAVINCI_LPSC_EMAC }, /* image download */ + { DAVINCI_LPSC_UART2 }, /* console */ + { DAVINCI_LPSC_GPIO }, +}; + +int board_init(void) +{ +#ifndef CONFIG_USE_IRQ + irq_init(); +#endif + + +#ifdef CONFIG_NAND_DAVINCI + /* + * NAND CS setup - cycle counts based on da850evm NAND timings in the + * Linux kernel @ 25MHz EMIFA + */ + writel((DAVINCI_ABCR_WSETUP(0) | + DAVINCI_ABCR_WSTROBE(0) | + DAVINCI_ABCR_WHOLD(0) | + DAVINCI_ABCR_RSETUP(0) | + DAVINCI_ABCR_RSTROBE(1) | + DAVINCI_ABCR_RHOLD(0) | + DAVINCI_ABCR_TA(0) | + DAVINCI_ABCR_ASIZE_8BIT), + &davinci_emif_regs->ab2cr); /* CS3 */ +#endif + + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_EA20; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + /* + * Power on required peripherals + * ARM does not have access by default to PSC0 and PSC1 + * assuming here that the DSP bootloader has set the IOPU + * such that PSC access is available to ARM + */ + if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc))) + return 1; + + /* setup the SUSPSRC for ARM to control emulation suspend */ + writel(readl(&davinci_syscfg_regs->suspsrc) & + ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | + DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | + DAVINCI_SYSCFG_SUSPSRC_UART2), + &davinci_syscfg_regs->suspsrc); + + /* configure pinmux settings */ + if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) + return 1; + +#ifdef CONFIG_DRIVER_TI_EMAC + if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0) + return 1; + + davinci_emac_mii_mode_sel(HAS_RMII); +#endif /* CONFIG_DRIVER_TI_EMAC */ + + /* enable the console UART */ + writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | + DAVINCI_UART_PWREMU_MGMT_UTRST), + &davinci_uart2_ctrl_regs->pwremu_mgmt); + + return 0; +} + +#ifdef CONFIG_DRIVER_TI_EMAC + +/* + * Initializes on-board ethernet controllers. + */ +int board_eth_init(bd_t *bis) +{ + if (!davinci_emac_initialize()) { + printf("Error: Ethernet init failed!\n"); + return -1; + } + + /* + * This board has a RMII PHY. However, the MDC line on the SOM + * must not be disabled (there is no MII PHY on the + * baseboard) via the GPIO2[6], because this pin + * disables at the same time the SPI flash. + */ + + return 0; +} +#endif /* CONFIG_DRIVER_TI_EMAC */ diff --git a/boards.cfg b/boards.cfg index beb5d81..6da9959 100644 --- a/boards.cfg +++ b/boards.cfg @@ -79,6 +79,7 @@ da850evm arm arm926ejs da8xxevm davinci hawkboard arm arm926ejs da8xxevm davinci davinci hawkboard_nand arm arm926ejs da8xxevm davinci davinci hawkboard:NAND_U_BOOT hawkboard_uart arm arm926ejs da8xxevm davinci davinci hawkboard:UART_U_BOOT +ea20 arm arm926ejs ea20 davinci davinci davinci_dm355evm arm arm926ejs dm355evm davinci davinci davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci davinci_dm365evm arm arm926ejs dm365evm davinci davinci diff --git a/include/configs/ea20.h b/include/configs/ea20.h new file mode 100644 index 0000000..48ce945 --- /dev/null +++ b/include/configs/ea20.h @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Board + */ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_USE_SPIFLASH +#define CONFIG_DRIVER_TI_EMAC_USE_RMII + +/* + * SoC Configuration + */ +#define CONFIG_MACH_DAVINCI_DA850_EVM +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) +#define CONFIG_SYS_OSCIN_FREQ 24000000 +#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0xc1080000 + +/* + * Memory Info + */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ +#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ +#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ + +/* memtest start addr */ +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) + +/* memtest will be run on 16MB */ +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ + +/* + * Serial Driver info + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_DAVINCI_SPI +#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE +#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + +/* + * Network & Ethernet Configuration + */ +#ifdef CONFIG_DRIVER_TI_EMAC +#define CONFIG_EMAC_MDIO_PHY_NUM 0 +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#endif + +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE (8 << 10) +#define CONFIG_ENV_OFFSET (256 << 10) +#define CONFIG_ENV_SECT_SIZE (64 << 10) +#define CONFIG_SYS_NO_FLASH +#endif + +/* + * U-Boot general configuration + */ +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "ea20 > " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* + * Linux Information + */ +#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 3 + +/* + * U-Boot commands + */ +#include +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY + +#ifndef CONFIG_DRIVER_TI_EMAC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PING +#endif + +#ifdef CONFIG_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND + +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_LZO +#define CONFIG_RBTREE +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#endif + +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SAVEENV +#endif + +#if !defined(CONFIG_USE_NAND) && \ + !defined(CONFIG_USE_NOR) && \ + !defined(CONFIG_USE_SPIFLASH) +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_SIZE (16 << 10) +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_ENV +#endif + +/* additions for new relocation code, must added to all boards */ +#define CONFIG_SYS_SDRAM_BASE 0xc0000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ + GENERATED_GBL_DATA_SIZE) +#endif /* __CONFIG_H */ -- cgit v1.1 From 263d5c2f84350703d31ccbfb76c6853570278e6c Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 28 Nov 2010 21:18:57 +0100 Subject: Remove redundant config.mk files Recent cleanup actions resulted in a number of config.mk files that contained only redundant entries like PLATFORM_CPPFLAGS += -I$(TOPDIR) or settings of variables that were not used anywhere in the code, like TEXT_END = 0xfe080000 Remove these unnecessary files. Signed-off-by: Wolfgang Denk Cc: Scott McNutt Cc: Wolfgang Wegner Cc: Josef Wagner Cc: Tolunay Orkun Cc: Frank Panno Cc: Heiko Schocher Cc: Brad Kemp Acked-by: Heiko Schocher --- arch/nios2/cpu/config.mk | 24 ------------------------ board/astro/mcf5373l/config.mk | 25 ------------------------- board/atc/config.mk | 28 ---------------------------- board/cmi/config.mk | 28 ---------------------------- board/cpc45/config.mk | 28 ---------------------------- board/cpu86/config.mk | 28 ---------------------------- board/cpu87/config.mk | 28 ---------------------------- board/csb272/config.mk | 31 ------------------------------- board/csb472/config.mk | 31 ------------------------------- board/ep8260/config.mk | 28 ---------------------------- board/genietv/config.mk | 24 ------------------------ board/icu862/config.mk | 28 ---------------------------- board/ids8247/config.mk | 27 --------------------------- board/mpl/pati/config.mk | 24 ------------------------ board/pm826/config.mk | 27 --------------------------- board/pm828/config.mk | 27 --------------------------- board/ppmc7xx/config.mk | 26 -------------------------- board/ppmc8260/config.mk | 32 -------------------------------- board/siemens/SCM/config.mk | 27 --------------------------- board/tqc/tqm8260/config.mk | 27 --------------------------- board/tqc/tqm8272/config.mk | 27 --------------------------- board/westel/amx860/config.mk | 24 ------------------------ 22 files changed, 599 deletions(-) delete mode 100644 arch/nios2/cpu/config.mk delete mode 100644 board/astro/mcf5373l/config.mk delete mode 100644 board/atc/config.mk delete mode 100644 board/cmi/config.mk delete mode 100644 board/cpc45/config.mk delete mode 100644 board/cpu86/config.mk delete mode 100644 board/cpu87/config.mk delete mode 100644 board/csb272/config.mk delete mode 100644 board/csb472/config.mk delete mode 100644 board/ep8260/config.mk delete mode 100644 board/genietv/config.mk delete mode 100644 board/icu862/config.mk delete mode 100644 board/ids8247/config.mk delete mode 100644 board/mpl/pati/config.mk delete mode 100644 board/pm826/config.mk delete mode 100644 board/pm828/config.mk delete mode 100644 board/ppmc7xx/config.mk delete mode 100644 board/ppmc8260/config.mk delete mode 100644 board/siemens/SCM/config.mk delete mode 100644 board/tqc/tqm8260/config.mk delete mode 100644 board/tqc/tqm8272/config.mk delete mode 100644 board/westel/amx860/config.mk diff --git a/arch/nios2/cpu/config.mk b/arch/nios2/cpu/config.mk deleted file mode 100644 index f228d72..0000000 --- a/arch/nios2/cpu/config.mk +++ /dev/null @@ -1,24 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -PLATFORM_RELFLAGS += diff --git a/board/astro/mcf5373l/config.mk b/board/astro/mcf5373l/config.mk deleted file mode 100644 index ad63dd1..0000000 --- a/board/astro/mcf5373l/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# Coldfire contribution by Bernhard Kuhn -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) diff --git a/board/atc/config.mk b/board/atc/config.mk deleted file mode 100644 index ebd758c..0000000 --- a/board/atc/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# ATC boards -# - -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/cmi/config.mk b/board/cmi/config.mk deleted file mode 100644 index 2685d4f..0000000 --- a/board/cmi/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2003 -# Martin Winistoerfer, martinwinistoerfer@gmx.ch. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# CMI Board Configuration -# - -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/cpc45/config.mk b/board/cpc45/config.mk deleted file mode 100644 index 0f8d665..0000000 --- a/board/cpc45/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2001-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# CPC45 board -# - -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/cpu86/config.mk b/board/cpu86/config.mk deleted file mode 100644 index 379017e..0000000 --- a/board/cpu86/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# CPU86 boards -# - -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/cpu87/config.mk b/board/cpu87/config.mk deleted file mode 100644 index 42f7f95..0000000 --- a/board/cpu87/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2001-2005 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# CPU87 board -# - -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/csb272/config.mk b/board/csb272/config.mk deleted file mode 100644 index a3cd040..0000000 --- a/board/csb272/config.mk +++ /dev/null @@ -1,31 +0,0 @@ -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2004 -# Tolunay Orkun, NextIO Inc., torkun@nextio.com. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# Cogent CSB272 board -# - -LDFLAGS += $(LINKER_UNDEFS) diff --git a/board/csb472/config.mk b/board/csb472/config.mk deleted file mode 100644 index 90a9cba..0000000 --- a/board/csb472/config.mk +++ /dev/null @@ -1,31 +0,0 @@ -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2004 -# Tolunay Orkun, NextIO Inc., torkun@nextio.com. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# Cogent CSB472 board -# - -LDFLAGS += $(LINKER_UNDEFS) diff --git a/board/ep8260/config.mk b/board/ep8260/config.mk deleted file mode 100644 index ee4b5ea..0000000 --- a/board/ep8260/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# EP8260 boards -# - -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/genietv/config.mk b/board/genietv/config.mk deleted file mode 100644 index 7e24fcc..0000000 --- a/board/genietv/config.mk +++ /dev/null @@ -1,24 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data diff --git a/board/icu862/config.mk b/board/icu862/config.mk deleted file mode 100644 index 9bfbc85..0000000 --- a/board/icu862/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# ICU862 boards -# - -OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data diff --git a/board/ids8247/config.mk b/board/ids8247/config.mk deleted file mode 100644 index c39beb8..0000000 --- a/board/ids8247/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2005 -# Heiko Schocher, DENX Software Engineering, -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# IDS 8247 Board -# -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/mpl/pati/config.mk b/board/mpl/pati/config.mk deleted file mode 100644 index ce56195..0000000 --- a/board/mpl/pati/config.mk +++ /dev/null @@ -1,24 +0,0 @@ -# -# (C) Copyright 2003 -# Martin Winistoerfer, martinwinistoerfer@gmx.ch. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/pm826/config.mk b/board/pm826/config.mk deleted file mode 100644 index 1da57e0..0000000 --- a/board/pm826/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2001-2010 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MicroSys PM826 board: -# -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/pm828/config.mk b/board/pm828/config.mk deleted file mode 100644 index 625632f..0000000 --- a/board/pm828/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2003-2010 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MicroSys PM828 board: -# -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/ppmc7xx/config.mk b/board/ppmc7xx/config.mk deleted file mode 100644 index ca574c4..0000000 --- a/board/ppmc7xx/config.mk +++ /dev/null @@ -1,26 +0,0 @@ -# -# (C) Copyright 2005 -# Richard Danter, Wind River Systems -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA - -TEXT_END = 0xFFF40000 diff --git a/board/ppmc8260/config.mk b/board/ppmc8260/config.mk deleted file mode 100644 index f0298fe..0000000 --- a/board/ppmc8260/config.mk +++ /dev/null @@ -1,32 +0,0 @@ -# -# (C) Copyright 2000 -# Sysgo Real-Time Solutions, GmbH -# Marius Groeger -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MBX8xx boards -# - -TEXT_END = 0xfe080000 diff --git a/board/siemens/SCM/config.mk b/board/siemens/SCM/config.mk deleted file mode 100644 index 4065843..0000000 --- a/board/siemens/SCM/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# Siemens SCM boards -# -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/tqc/tqm8260/config.mk b/board/tqc/tqm8260/config.mk deleted file mode 100644 index f266321..0000000 --- a/board/tqc/tqm8260/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# TQM8260 boards -# -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/tqc/tqm8272/config.mk b/board/tqc/tqm8272/config.mk deleted file mode 100644 index 60a048f..0000000 --- a/board/tqc/tqm8272/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# TQM8272 boards -# -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/westel/amx860/config.mk b/board/westel/amx860/config.mk deleted file mode 100644 index b71db6a..0000000 --- a/board/westel/amx860/config.mk +++ /dev/null @@ -1,24 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data -- cgit v1.1 From 2ced53e1ad552a7a192b2f3c9671e60eb668ecfa Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 28 Nov 2010 21:18:58 +0100 Subject: Move LDSCRIPT definitions to board config files. Recent cleanup actions resulted in a number of config.mk files that contained only LDSCRIPT definitions. Move these into th respective board config files and remove the now empty config.mk files. Signed-off-by: Wolfgang Denk Cc: Matthias Fuchs Cc: Detlev Zundel Cc: Heiko Schocher Cc: Andre Schwarz Cc: Peter De Schrijver Acked-by: Detlev Zundel < dzu@denx.de> Acked-by: Andre Schwarz Acked-by: Heiko Schocher Acked-by: Matthias Fuchs --- board/amirix/ap1000/config.mk | 25 ------------------------- board/esd/dasa_sim/config.mk | 25 ------------------------- board/inka4x0/config.mk | 27 --------------------------- board/manroland/uc101/config.mk | 24 ------------------------ board/matrix_vision/mvsmr/config.mk | 24 ------------------------ board/ml2/config.mk | 25 ------------------------- board/mousse/config.mk | 27 --------------------------- board/rsdproto/config.mk | 28 ---------------------------- include/configs/AP1000.h | 1 + include/configs/DASA_SIM.h | 1 + include/configs/ML2.h | 1 + include/configs/MOUSSE.h | 1 + include/configs/MVSMR.h | 1 + include/configs/inka4x0.h | 1 + include/configs/rsdproto.h | 1 + include/configs/uc101.h | 1 + 16 files changed, 8 insertions(+), 205 deletions(-) delete mode 100644 board/amirix/ap1000/config.mk delete mode 100644 board/esd/dasa_sim/config.mk delete mode 100644 board/inka4x0/config.mk delete mode 100644 board/manroland/uc101/config.mk delete mode 100644 board/matrix_vision/mvsmr/config.mk delete mode 100644 board/ml2/config.mk delete mode 100644 board/mousse/config.mk delete mode 100644 board/rsdproto/config.mk diff --git a/board/amirix/ap1000/config.mk b/board/amirix/ap1000/config.mk deleted file mode 100644 index 2d075b6..0000000 --- a/board/amirix/ap1000/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# Use board specific linker script -LDSCRIPT := $(SRCTREE)/board/amirix/ap1000/u-boot.lds diff --git a/board/esd/dasa_sim/config.mk b/board/esd/dasa_sim/config.mk deleted file mode 100644 index a92d9a9..0000000 --- a/board/esd/dasa_sim/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# Use board specific linker script -LDSCRIPT := $(SRCTREE)/board/esd/dasa_sim/u-boot.lds diff --git a/board/inka4x0/config.mk b/board/inka4x0/config.mk deleted file mode 100644 index a42d124..0000000 --- a/board/inka4x0/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# INKA 4X0 board: -# -LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds diff --git a/board/manroland/uc101/config.mk b/board/manroland/uc101/config.mk deleted file mode 100644 index 54dc1c4..0000000 --- a/board/manroland/uc101/config.mk +++ /dev/null @@ -1,24 +0,0 @@ -# -# (C) Copyright 2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds diff --git a/board/matrix_vision/mvsmr/config.mk b/board/matrix_vision/mvsmr/config.mk deleted file mode 100644 index d5308d9..0000000 --- a/board/matrix_vision/mvsmr/config.mk +++ /dev/null @@ -1,24 +0,0 @@ -# -# (C) Copyright 2003-2010 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -LDSCRIPT := $(SRCTREE)/board/matrix_vision/mvsmr/u-boot.lds diff --git a/board/ml2/config.mk b/board/ml2/config.mk deleted file mode 100644 index 06ba43f..0000000 --- a/board/ml2/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# Use board specific linker script -LDSCRIPT := $(SRCTREE)/board/ml2/u-boot.lds diff --git a/board/mousse/config.mk b/board/mousse/config.mk deleted file mode 100644 index a69215b..0000000 --- a/board/mousse/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MOUSSE boards -# -LDSCRIPT := $(SRCTREE)/board/mousse/u-boot.lds diff --git a/board/rsdproto/config.mk b/board/rsdproto/config.mk deleted file mode 100644 index 9617f08..0000000 --- a/board/rsdproto/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2000 -# Sysgo Real-Time Solutions, GmbH -# Marius Groeger -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -LDSCRIPT := $(SRCTREE)/board/rsdproto/u-boot.lds diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index ffaab79..37dd757 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -33,6 +33,7 @@ * run from RAM instead of Flash. */ #define CONFIG_SYS_TEXT_BASE 0x08000000 +#define CONFIG_SYS_LDSCRIPT "board/amirix/ap1000/u-boot.lds" #define CONFIG_PCI 1 diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h index 3706071..53229d9 100644 --- a/include/configs/DASA_SIM.h +++ b/include/configs/DASA_SIM.h @@ -37,6 +37,7 @@ #define CONFIG_DASA_SIM 1 /* ...on a DASA_SIM board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 +#define CONFIG_SYS_LDSCRIPT "board/esd/dasa_sim/u-boot.lds" #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ diff --git a/include/configs/ML2.h b/include/configs/ML2.h index 1e96b9e..4df9f4c 100644 --- a/include/configs/ML2.h +++ b/include/configs/ML2.h @@ -31,6 +31,7 @@ #define CONFIG_ML2 1 /* ...on a ML2 board */ #define CONFIG_SYS_TEXT_BASE 0x18000000 +#define CONFIG_SYS_LDSCRIPT "board/ml2/u-boot.lds" #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index 9529c87..c809a6b 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -50,6 +50,7 @@ #define CONFIG_MOUSSE 1 #define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#define CONFIG_SYS_LDSCRIPT "board/mousse/u-boot.lds" #define CONFIG_SYS_ADDR_MAP_B 1 diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h index f7fd9b2..f94ad5c 100644 --- a/include/configs/MVSMR.h +++ b/include/configs/MVSMR.h @@ -35,6 +35,7 @@ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFF800000 #endif +#define CONFIG_SYS_LDSCRIPT "board/matrix_vision/mvsmr/u-boot.lds" #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 9b116e6..b19d544 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -44,6 +44,7 @@ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFE00000 /* Standard: boot low */ #endif +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds" #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 5761f20..2ed189e 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -40,6 +40,7 @@ #define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_SYS_TEXT_BASE 0xff000000 +#define CONFIG_SYS_LDSCRIPT "board/rsdproto/u-boot.lds" #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ diff --git a/include/configs/uc101.h b/include/configs/uc101.h index 483534c..f136691 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -35,6 +35,7 @@ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF00000 #endif +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds" #include "manroland/common.h" #include "manroland/mpc5200-common.h" -- cgit v1.1