From 9e5f060e45ef6b0d80a69697b021bd24672eed57 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Tue, 1 Apr 2014 20:09:13 +0200 Subject: lsxl: use 64bit for LBA48 to support 4 TB drives Cc: Prafulla Wadaskar Signed-off-by: Michael Walle --- include/configs/lsxl.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 96a889f..97a8bb7 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -161,6 +161,7 @@ #undef CONFIG_SYS_IDE_MAXDEVICE #define CONFIG_SYS_IDE_MAXDEVICE 1 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_64BIT_LBA #endif #endif /* _CONFIG_LSXL_H */ -- cgit v1.1 From 848fe239c6b03556848e75676c27f0958009f4d7 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Tue, 1 Apr 2014 20:09:14 +0200 Subject: lsxl: rework boot scripts Move addresses for kernel, ramdisk and fdt blob to own variables. Add dtb blob loading to all existing boot scripts, dtb filenames were taken from vanilla kernel. Introduce new boot script bootcmd_legacy, which only loads a kernel and a ramdisk. Make this the default boot script. This should also restore the behaviour of the original bootloader. Cc: Prafulla Wadaskar Cc: Tom Rini Signed-off-by: Michael Walle --- include/configs/lsxl.h | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-) diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 97a8bb7..f5f4961 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -66,6 +66,7 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_CMD_USB +#define CONFIG_CMD_FS_GENERIC #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION @@ -109,20 +110,41 @@ #define CONFIG_LOADADDR 0x00800000 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" + +#if defined(CONFIG_LSXHL) +#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" +#elif defined(CONFIG_LSCHLV2) +#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" +#else +#error "Unsupported board" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "bootsource=hdd\0" \ + "bootsource=legacy\0" \ "hdpart=0:1\0" \ - "bootcmd_net=bootp 0x00100000 uImage " \ - "&& tftpboot 0x00800000 uInitrd " \ + "kernel_addr=0x00800000\0" \ + "ramdisk_addr=0x01000000\0" \ + "fdt_addr=0x01ff0000\0" \ + "bootcmd_legacy=ide reset " \ + "&& load ide ${hdpart} 0x00100000 /uImage.buffalo " \ + "&& load ide ${hdpart} 0x00800000 /initrd.buffalo " \ "&& bootm 0x00100000 0x00800000\0" \ + "bootcmd_net=bootp ${kernel_addr} uImage " \ + "&& tftpboot ${ramdisk_addr} uInitrd " \ + "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ + "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "bootcmd_hdd=ide reset " \ - "&& ext2load ide ${hdpart} 0x00100000 /uImage " \ - "&& ext2load ide ${hdpart} 0x00800000 /uInitrd " \ - "&& bootm 0x00100000 0x00800000\0" \ + "&& load ide ${hdpart} ${kernel_addr} /uImage " \ + "&& load ide ${hdpart} ${ramdisk_addr} /uInitrd " \ + "&& load ide ${hdpart} ${fdt_addr} " \ + "/" CONFIG_FDTFILE " " \ + "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "bootcmd_usb=usb start " \ - "&& fatload usb 0:1 0x00100000 /uImage " \ - "&& fatload usb 0:1 0x00800000 /uInitrd " \ - "&& bootm 0x00100000 0x00800000\0" \ + "&& load usb 0:1 ${kernel_addr} /uImage " \ + "&& load usb 0:1 ${ramdisk_addr} /uInitrd " \ + "&& load usb 0:1 ${fdt_addr} " \ + "/" CONFIG_FDTFILE " " \ + "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ "eraseenv=sf probe 0 " \ "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ -- cgit v1.1 From 46e09e6d1eb32a90705d162411476f57fff13860 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 11 Apr 2014 15:09:44 -0500 Subject: ARM: highbank: convert to generic board Enable CONFIG_SYS_GENERIC_BOARD on highbank. Signed-off-by: Rob Herring --- include/configs/highbank.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/highbank.h b/include/configs/highbank.h index a6202cf..da1c837 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -13,6 +13,7 @@ #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_OF_BOARD_SETUP #define CONFIG_FIT -- cgit v1.1 From 1277bac0d21bfa6952bdb14fcbf4134aa3018056 Mon Sep 17 00:00:00 2001 From: David Feng Date: Sat, 19 Apr 2014 09:45:21 +0800 Subject: Arm64 fix a bug of vbar_el3 initialization Signed-off-by: David Feng --- arch/arm/cpu/armv8/start.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index 33d3f36..4b11aa4 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -50,10 +50,10 @@ reset: */ adr x0, vectors switch_el x1, 3f, 2f, 1f -3: mrs x0, scr_el3 +3: msr vbar_el3, x0 + mrs x0, scr_el3 orr x0, x0, #0xf /* SCR_EL3.NS|IRQ|FIQ|EA */ msr scr_el3, x0 - msr vbar_el3, x0 msr cptr_el3, xzr /* Enable FP/SIMD */ ldr x0, =COUNTER_FREQUENCY msr cntfrq_el0, x0 /* Initialize CNTFRQ */ -- cgit v1.1 From 56d83d1c046c693b65ab09c0e960d922ec639c2b Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 23 Apr 2014 18:17:51 +0200 Subject: arm: vf610: add DDR_SEL_PAD_CONTR register Set DDR_SEL_PAD_CONTR register explicitly to DDR3 which solves RAM issues with newer silicon (1.1). This register was added in revision 4 of the Vybrid Reference Manual. Signed-off-by: Stefan Agner --- arch/arm/include/asm/arch-vf610/imx-regs.h | 1 + board/freescale/vf610twr/vf610twr.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h index c2f9761..0c28e1b 100644 --- a/arch/arm/include/asm/arch-vf610/imx-regs.h +++ b/arch/arm/include/asm/arch-vf610/imx-regs.h @@ -215,6 +215,7 @@ #define DDRMC_CR139_PHY_WRLV_EN(v) ((v) & 0xff) #define DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(v) (((v) & 0x1f) << 27) #define DDRMC_CR154_PAD_ZQ_MODE(v) (((v) & 0x3) << 21) +#define DDRMC_CR154_DDR_SEL_PAD_CONTR(v) (((v) & 0x3) << 18) #define DDRMC_CR155_AXI0_AWCACHE (1 << 10) #define DDRMC_CR155_PAD_ODT_BYTE1(v) ((v) & 0x7) #define DDRMC_CR158_TWR(v) ((v) & 0x3f) diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c index 4ee74c0..d64d3aa 100644 --- a/board/freescale/vf610twr/vf610twr.c +++ b/board/freescale/vf610twr/vf610twr.c @@ -217,7 +217,8 @@ void ddr_ctrl_init(void) &ddrmr->cr[139]); writel(DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) | - DDRMC_CR154_PAD_ZQ_MODE(1), &ddrmr->cr[154]); + DDRMC_CR154_PAD_ZQ_MODE(1) | + DDRMC_CR154_DDR_SEL_PAD_CONTR(3), &ddrmr->cr[154]); writel(DDRMC_CR155_AXI0_AWCACHE | DDRMC_CR155_PAD_ODT_BYTE1(2), &ddrmr->cr[155]); writel(DDRMC_CR158_TWR(6), &ddrmr->cr[158]); -- cgit v1.1 From 4f7f4041c4fe8bd31d3c4404af0cb2befa760e60 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 23 Apr 2014 11:34:40 -0500 Subject: boards.cfg: update highbank maintainer email My Calxeda email is gone, so update my email address. Signed-off-by: Rob Herring --- boards.cfg | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/boards.cfg b/boards.cfg index 221b7f8..c40937f 100644 --- a/boards.cfg +++ b/boards.cfg @@ -295,7 +295,7 @@ Active arm armv7 exynos samsung smdkv310 Active arm armv7 exynos samsung trats trats - Lukasz Majewski Active arm armv7 exynos samsung trats2 trats2 - Piotr Wilczek Active arm armv7 exynos samsung universal_c210 s5pc210_universal - Przemyslaw Marczak -Active arm armv7 highbank - highbank highbank - Rob Herring +Active arm armv7 highbank - highbank highbank - Rob Herring Active arm armv7 keystone ti k2hk_evm k2hk_evm - Vitaly Andrianov Active arm armv7 mx5 denx m53evk m53evk m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg Marek Vasut Active arm armv7 mx5 esg ima3-mx53 ima3-mx53 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg - -- cgit v1.1 From 643cf0ea027744edec9619d31cb001f3b2444099 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 5 May 2014 11:52:23 +0100 Subject: sunxi: add sun7i clocks and timer support. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds the basic clocks and timer support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Some of the code here is common to multiple sunxi subarchtectures, hence files are named sun4i which is the earliest similar variant. Signed-off-by: Alexandru Gagniuc Signed-off-by: Chen-Yu Tsai Signed-off-by: Emilio López Signed-off-by: Hans de Goede Signed-off-by: Henrik Nordstrom Signed-off-by: Jens Kuske Signed-off-by: Luke Leighton Signed-off-by: Oliver Schinagl Signed-off-by: Ian Campbell Cc: Stefan Roese Cc: Tom Cubie Reviewed-by: Tom Rini --- arch/arm/cpu/armv7/sunxi/Makefile | 12 ++ arch/arm/cpu/armv7/sunxi/clock.c | 25 +++ arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 188 +++++++++++++++++++ arch/arm/cpu/armv7/sunxi/timer.c | 113 ++++++++++++ arch/arm/include/asm/arch-sunxi/clock.h | 29 +++ arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 256 ++++++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/sys_proto.h | 16 ++ arch/arm/include/asm/arch-sunxi/timer.h | 88 +++++++++ 8 files changed, 727 insertions(+) create mode 100644 arch/arm/cpu/armv7/sunxi/Makefile create mode 100644 arch/arm/cpu/armv7/sunxi/clock.c create mode 100644 arch/arm/cpu/armv7/sunxi/clock_sun4i.c create mode 100644 arch/arm/cpu/armv7/sunxi/timer.c create mode 100644 arch/arm/include/asm/arch-sunxi/clock.h create mode 100644 arch/arm/include/asm/arch-sunxi/clock_sun4i.h create mode 100644 arch/arm/include/asm/arch-sunxi/sys_proto.h create mode 100644 arch/arm/include/asm/arch-sunxi/timer.h diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile new file mode 100644 index 0000000..440d266 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -0,0 +1,12 @@ +# +# (C) Copyright 2012 Henrik Nordstrom +# +# Based on some other Makefile +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# +obj-y += timer.o +obj-y += clock.o +obj-$(CONFIG_SUN7I) += clock_sun4i.o diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c new file mode 100644 index 0000000..47fb70f --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/clock.c @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * (C) Copyright 2013 Luke Kenneth Casson Leighton + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int clock_init(void) +{ +#ifdef CONFIG_SPL_BUILD + clock_init_safe(); +#endif + clock_init_uart(); + + return 0; +} diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c new file mode 100644 index 0000000..5a7da3c --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -0,0 +1,188 @@ +/* + * sun4i, sun5i and sun7i specific clock code + * + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * (C) Copyright 2013 Luke Kenneth Casson Leighton + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +#ifdef CONFIG_SPL_BUILD +void clock_init_safe(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Set safe defaults until PMU is configured */ + writel(AXI_DIV_1 << AXI_DIV_SHIFT | + AHB_DIV_2 << AHB_DIV_SHIFT | + APB0_DIV_1 << APB0_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg); + sdelay(200); + writel(AXI_DIV_1 << AXI_DIV_SHIFT | + AHB_DIV_2 << AHB_DIV_SHIFT | + APB0_DIV_1 << APB0_DIV_SHIFT | + CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); +#ifdef CONFIG_SUN7I + writel(0x1 << AHB_GATE_OFFSET_DMA | readl(&ccm->ahb_gate0), + &ccm->ahb_gate0); +#endif + writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); +} +#endif + +void clock_init_uart(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* uart clock source is apb1 */ + writel(APB1_CLK_SRC_OSC24M| + APB1_CLK_RATE_N_1| + APB1_CLK_RATE_M(1), + &ccm->apb1_clk_div_cfg); + + /* open the clock for uart */ + setbits_le32(&ccm->apb1_gate, + CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1)); +} + +int clock_twi_onoff(int port, int state) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + if (port > 2) + return -1; + + /* set the apb clock gate for twi */ + if (state) + setbits_le32(&ccm->apb1_gate, + CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port)); + else + clrbits_le32(&ccm->apb1_gate, + CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port)); + + return 0; +} + +#ifdef CONFIG_SPL_BUILD +#define PLL1_CFG(N, K, M, P) ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \ + 0 << CCM_PLL1_CFG_VCO_RST_SHIFT | \ + 8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \ + 0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \ + 16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \ + (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \ + 2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \ + (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \ + (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \ + 0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \ + 0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \ + (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT) + +static struct { + u32 pll1_cfg; + unsigned int freq; +} pll1_para[] = { + /* This array must be ordered by frequency. */ + { PLL1_CFG(16, 0, 0, 0), 384000000 }, + { PLL1_CFG(16, 1, 0, 0), 768000000 }, + { PLL1_CFG(20, 1, 0, 0), 960000000 }, + { PLL1_CFG(21, 1, 0, 0), 1008000000}, + { PLL1_CFG(22, 1, 0, 0), 1056000000}, + { PLL1_CFG(23, 1, 0, 0), 1104000000}, + { PLL1_CFG(24, 1, 0, 0), 1152000000}, + { PLL1_CFG(25, 1, 0, 0), 1200000000}, + { PLL1_CFG(26, 1, 0, 0), 1248000000}, + { PLL1_CFG(27, 1, 0, 0), 1296000000}, + { PLL1_CFG(28, 1, 0, 0), 1344000000}, + { PLL1_CFG(29, 1, 0, 0), 1392000000}, + { PLL1_CFG(30, 1, 0, 0), 1440000000}, + { PLL1_CFG(31, 1, 0, 0), 1488000000}, + /* Final catchall entry */ + { PLL1_CFG(31, 1, 0, 0), ~0}, +}; + +void clock_set_pll1(unsigned int hz) +{ + int i = 0; + int axi, ahb, apb0; + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Find target frequency */ + while (pll1_para[i].freq < hz) + i++; + + hz = pll1_para[i].freq; + + /* Calculate system clock divisors */ + axi = DIV_ROUND_UP(hz, 432000000); /* Max 450MHz */ + ahb = DIV_ROUND_UP(hz/axi, 204000000); /* Max 250MHz */ + apb0 = 2; /* Max 150MHz */ + + printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0); + + /* Map divisors to register values */ + axi = axi - 1; + if (ahb > 4) + ahb = 3; + else if (ahb > 2) + ahb = 2; + else if (ahb > 1) + ahb = 1; + else + ahb = 0; + + apb0 = apb0 - 1; + + /* Switch to 24MHz clock while changing PLL1 */ + writel(AXI_DIV_1 << AXI_DIV_SHIFT | + AHB_DIV_2 << AHB_DIV_SHIFT | + APB0_DIV_1 << APB0_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + sdelay(20); + + /* Configure sys clock divisors */ + writel(axi << AXI_DIV_SHIFT | + ahb << AHB_DIV_SHIFT | + apb0 << APB0_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + + /* Configure PLL1 at the desired frequency */ + writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg); + sdelay(200); + + /* Switch CPU to PLL1 */ + writel(axi << AXI_DIV_SHIFT | + ahb << AHB_DIV_SHIFT | + apb0 << APB0_DIV_SHIFT | + CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + sdelay(20); +} +#endif + +unsigned int clock_get_pll6(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + uint32_t rval = readl(&ccm->pll6_cfg); + int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT); + int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; + return 24000000 * n * k / 2; +} diff --git a/arch/arm/cpu/armv7/sunxi/timer.c b/arch/arm/cpu/armv7/sunxi/timer.c new file mode 100644 index 0000000..3626389 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/timer.c @@ -0,0 +1,113 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define TIMER_MODE (0x0 << 7) /* continuous mode */ +#define TIMER_DIV (0x0 << 4) /* pre scale 1 */ +#define TIMER_SRC (0x1 << 2) /* osc24m */ +#define TIMER_RELOAD (0x1 << 1) /* reload internal value */ +#define TIMER_EN (0x1 << 0) /* enable timer */ + +#define TIMER_CLOCK (24 * 1000 * 1000) +#define COUNT_TO_USEC(x) ((x) / 24) +#define USEC_TO_COUNT(x) ((x) * 24) +#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) +#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) + +#define TIMER_LOAD_VAL 0xffffffff + +#define TIMER_NUM 0 /* we use timer 0 */ + +/* read the 32-bit timer */ +static ulong read_timer(void) +{ + struct sunxi_timer_reg *timers = + (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; + struct sunxi_timer *timer = &timers->timer[TIMER_NUM]; + + /* + * The hardware timer counts down, therefore we invert to + * produce an incrementing timer. + */ + return ~readl(&timer->val); +} + +/* init timer register */ +int timer_init(void) +{ + struct sunxi_timer_reg *timers = + (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; + struct sunxi_timer *timer = &timers->timer[TIMER_NUM]; + writel(TIMER_LOAD_VAL, &timer->inter); + writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN, + &timer->ctl); + + return 0; +} + +/* timer without interrupts */ +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +ulong get_timer_masked(void) +{ + /* current tick value */ + ulong now = TICKS_TO_HZ(read_timer()); + + if (now >= gd->arch.lastinc) /* normal (non rollover) */ + gd->arch.tbl += (now - gd->arch.lastinc); + else { + /* rollover */ + gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) + - gd->arch.lastinc) + now; + } + gd->arch.lastinc = now; + + return gd->arch.tbl; +} + +/* delay x useconds */ +void __udelay(unsigned long usec) +{ + long tmo = USEC_TO_COUNT(usec); + ulong now, last = read_timer(); + + while (tmo > 0) { + now = read_timer(); + if (now > last) /* normal (non rollover) */ + tmo -= now - last; + else /* rollover */ + tmo -= TIMER_LOAD_VAL - last + now; + last = now; + } +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h new file mode 100644 index 0000000..5669f39 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -0,0 +1,29 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CLOCK_H +#define _SUNXI_CLOCK_H + +#include + +#define CLK_GATE_OPEN 0x1 +#define CLK_GATE_CLOSE 0x0 + +/* clock control module regs definition */ +#include + +#ifndef __ASSEMBLY__ +int clock_init(void); +int clock_twi_onoff(int port, int state); +void clock_set_pll1(unsigned int hz); +unsigned int clock_get_pll6(void); +void clock_init_safe(void); +void clock_init_uart(void); +#endif + +#endif /* _SUNXI_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h new file mode 100644 index 0000000..928f3f2 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h @@ -0,0 +1,256 @@ +/* + * sun4i, sun5i and sun7i clock register definitions + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CLOCK_SUN4I_H +#define _SUNXI_CLOCK_SUN4I_H + +struct sunxi_ccm_reg { + u32 pll1_cfg; /* 0x00 pll1 control */ + u32 pll1_tun; /* 0x04 pll1 tuning */ + u32 pll2_cfg; /* 0x08 pll2 control */ + u32 pll2_tun; /* 0x0c pll2 tuning */ + u32 pll3_cfg; /* 0x10 pll3 control */ + u8 res0[0x4]; + u32 pll4_cfg; /* 0x18 pll4 control */ + u8 res1[0x4]; + u32 pll5_cfg; /* 0x20 pll5 control */ + u32 pll5_tun; /* 0x24 pll5 tuning */ + u32 pll6_cfg; /* 0x28 pll6 control */ + u32 pll6_tun; /* 0x2c pll6 tuning */ + u32 pll7_cfg; /* 0x30 pll7 control */ + u32 pll1_tun2; /* 0x34 pll5 tuning2 */ + u8 res2[0x4]; + u32 pll5_tun2; /* 0x3c pll5 tuning2 */ + u8 res3[0xc]; + u32 pll_lock_dbg; /* 0x4c pll lock time debug */ + u32 osc24m_cfg; /* 0x50 osc24m control */ + u32 cpu_ahb_apb0_cfg; /* 0x54 cpu,ahb and apb0 divide ratio */ + u32 apb1_clk_div_cfg; /* 0x58 apb1 clock dividor */ + u32 axi_gate; /* 0x5c axi module clock gating */ + u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */ + u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */ + u32 apb0_gate; /* 0x68 apb0 module clock gating */ + u32 apb1_gate; /* 0x6c apb1 module clock gating */ + u8 res4[0x10]; + u32 nand_sclk_cfg; /* 0x80 nand sub clock control */ + u32 ms_sclk_cfg; /* 0x84 memory stick sub clock control */ + u32 sd0_clk_cfg; /* 0x88 sd0 clock control */ + u32 sd1_clk_cfg; /* 0x8c sd1 clock control */ + u32 sd2_clk_cfg; /* 0x90 sd2 clock control */ + u32 sd3_clk_cfg; /* 0x94 sd3 clock control */ + u32 ts_clk_cfg; /* 0x98 transport stream clock control */ + u32 ss_clk_cfg; /* 0x9c */ + u32 spi0_clk_cfg; /* 0xa0 */ + u32 spi1_clk_cfg; /* 0xa4 */ + u32 spi2_clk_cfg; /* 0xa8 */ + u32 pata_clk_cfg; /* 0xac */ + u32 ir0_clk_cfg; /* 0xb0 */ + u32 ir1_clk_cfg; /* 0xb4 */ + u32 iis_clk_cfg; /* 0xb8 */ + u32 ac97_clk_cfg; /* 0xbc */ + u32 spdif_clk_cfg; /* 0xc0 */ + u32 keypad_clk_cfg; /* 0xc4 */ + u32 sata_clk_cfg; /* 0xc8 */ + u32 usb_clk_cfg; /* 0xcc */ + u32 gps_clk_cfg; /* 0xd0 */ + u32 spi3_clk_cfg; /* 0xd4 */ + u8 res5[0x28]; + u32 dram_clk_cfg; /* 0x100 */ + u32 be0_clk_cfg; /* 0x104 */ + u32 be1_clk_cfg; /* 0x108 */ + u32 fe0_clk_cfg; /* 0x10c */ + u32 fe1_clk_cfg; /* 0x110 */ + u32 mp_clk_cfg; /* 0x114 */ + u32 lcd0_ch0_clk_cfg; /* 0x118 */ + u32 lcd1_ch0_clk_cfg; /* 0x11c */ + u32 csi_isp_clk_cfg; /* 0x120 */ + u8 res6[0x4]; + u32 tvd_clk_reg; /* 0x128 */ + u32 lcd0_ch1_clk_cfg; /* 0x12c */ + u32 lcd1_ch1_clk_cfg; /* 0x130 */ + u32 csi0_clk_cfg; /* 0x134 */ + u32 csi1_clk_cfg; /* 0x138 */ + u32 ve_clk_cfg; /* 0x13c */ + u32 audio_codec_clk_cfg; /* 0x140 */ + u32 avs_clk_cfg; /* 0x144 */ + u32 ace_clk_cfg; /* 0x148 */ + u32 lvds_clk_cfg; /* 0x14c */ + u32 hdmi_clk_cfg; /* 0x150 */ + u32 mali_clk_cfg; /* 0x154 */ + u8 res7[0x4]; + u32 mbus_clk_cfg; /* 0x15c */ + u8 res8[0x4]; + u32 gmac_clk_cfg; /* 0x164 */ +}; + +/* apb1 bit field */ +#define APB1_CLK_SRC_OSC24M (0x0 << 24) +#define APB1_CLK_SRC_PLL6 (0x1 << 24) +#define APB1_CLK_SRC_LOSC (0x2 << 24) +#define APB1_CLK_SRC_MASK (0x3 << 24) +#define APB1_CLK_RATE_N_1 (0x0 << 16) +#define APB1_CLK_RATE_N_2 (0x1 << 16) +#define APB1_CLK_RATE_N_4 (0x2 << 16) +#define APB1_CLK_RATE_N_8 (0x3 << 16) +#define APB1_CLK_RATE_N_MASK (3 << 16) +#define APB1_CLK_RATE_M(m) (((m)-1) << 0) +#define APB1_CLK_RATE_M_MASK (0x1f << 0) + +/* apb1 gate field */ +#define APB1_GATE_UART_SHIFT (16) +#define APB1_GATE_UART_MASK (0xff << APB1_GATE_UART_SHIFT) +#define APB1_GATE_TWI_SHIFT (0) +#define APB1_GATE_TWI_MASK (0xf << APB1_GATE_TWI_SHIFT) + +/* clock divide */ +#define AXI_DIV_SHIFT (0) +#define AXI_DIV_1 0 +#define AXI_DIV_2 1 +#define AXI_DIV_3 2 +#define AXI_DIV_4 3 +#define AHB_DIV_SHIFT (4) +#define AHB_DIV_1 0 +#define AHB_DIV_2 1 +#define AHB_DIV_4 2 +#define AHB_DIV_8 3 +#define APB0_DIV_SHIFT (8) +#define APB0_DIV_1 0 +#define APB0_DIV_2 1 +#define APB0_DIV_4 2 +#define APB0_DIV_8 3 +#define CPU_CLK_SRC_SHIFT (16) +#define CPU_CLK_SRC_OSC24M 1 +#define CPU_CLK_SRC_PLL1 2 + +#define CCM_PLL1_CFG_ENABLE_SHIFT 31 +#define CCM_PLL1_CFG_VCO_RST_SHIFT 30 +#define CCM_PLL1_CFG_VCO_BIAS_SHIFT 26 +#define CCM_PLL1_CFG_PLL4_EXCH_SHIFT 25 +#define CCM_PLL1_CFG_BIAS_CUR_SHIFT 20 +#define CCM_PLL1_CFG_DIVP_SHIFT 16 +#define CCM_PLL1_CFG_LCK_TMR_SHIFT 13 +#define CCM_PLL1_CFG_FACTOR_N_SHIFT 8 +#define CCM_PLL1_CFG_FACTOR_K_SHIFT 4 +#define CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT 3 +#define CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT 2 +#define CCM_PLL1_CFG_FACTOR_M_SHIFT 0 + +#define PLL1_CFG_DEFAULT 0xa1005000 + +#define PLL6_CFG_DEFAULT 0xa1009911 + +/* nand clock */ +#define NAND_CLK_SRC_OSC24 0 +#define NAND_CLK_DIV_N 0 +#define NAND_CLK_DIV_M 0 + +/* gps clock */ +#define GPS_SCLK_GATING_OFF 0 +#define GPS_RESET 0 + +/* ahb clock gate bit offset */ +#define AHB_GATE_OFFSET_GPS 26 +#define AHB_GATE_OFFSET_SATA 25 +#define AHB_GATE_OFFSET_PATA 24 +#define AHB_GATE_OFFSET_SPI3 23 +#define AHB_GATE_OFFSET_SPI2 22 +#define AHB_GATE_OFFSET_SPI1 21 +#define AHB_GATE_OFFSET_SPI0 20 +#define AHB_GATE_OFFSET_TS0 18 +#define AHB_GATE_OFFSET_EMAC 17 +#define AHB_GATE_OFFSET_ACE 16 +#define AHB_GATE_OFFSET_DLL 15 +#define AHB_GATE_OFFSET_SDRAM 14 +#define AHB_GATE_OFFSET_NAND 13 +#define AHB_GATE_OFFSET_MS 12 +#define AHB_GATE_OFFSET_MMC3 11 +#define AHB_GATE_OFFSET_MMC2 10 +#define AHB_GATE_OFFSET_MMC1 9 +#define AHB_GATE_OFFSET_MMC0 8 +#define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n)) +#define AHB_GATE_OFFSET_BIST 7 +#define AHB_GATE_OFFSET_DMA 6 +#define AHB_GATE_OFFSET_SS 5 +#define AHB_GATE_OFFSET_USB_OHCI1 4 +#define AHB_GATE_OFFSET_USB_EHCI1 3 +#define AHB_GATE_OFFSET_USB_OHCI0 2 +#define AHB_GATE_OFFSET_USB_EHCI0 1 +#define AHB_GATE_OFFSET_USB 0 + +/* ahb clock gate bit offset (second register) */ +#define AHB_GATE_OFFSET_GMAC 17 + +#define CCM_AHB_GATE_GPS (0x1 << 26) +#define CCM_AHB_GATE_SDRAM (0x1 << 14) +#define CCM_AHB_GATE_DLL (0x1 << 15) +#define CCM_AHB_GATE_ACE (0x1 << 16) + +#define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0) +#define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3) +#define CCM_PLL5_CTRL_M_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_M1(n) (((n) & 0x3) << 2) +#define CCM_PLL5_CTRL_M1_MASK CCM_PLL5_CTRL_M1(0x3) +#define CCM_PLL5_CTRL_M1_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_K(n) (((n) & 0x3) << 4) +#define CCM_PLL5_CTRL_K_MASK CCM_PLL5_CTRL_K(0x3) +#define CCM_PLL5_CTRL_K_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_LDO (0x1 << 7) +#define CCM_PLL5_CTRL_N(n) (((n) & 0x1f) << 8) +#define CCM_PLL5_CTRL_N_MASK CCM_PLL5_CTRL_N(0x1f) +#define CCM_PLL5_CTRL_N_X(n) (n) +#define CCM_PLL5_CTRL_P(n) (((n) & 0x3) << 16) +#define CCM_PLL5_CTRL_P_MASK CCM_PLL5_CTRL_P(0x3) +#define CCM_PLL5_CTRL_P_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_BW (0x1 << 18) +#define CCM_PLL5_CTRL_VCO_GAIN (0x1 << 19) +#define CCM_PLL5_CTRL_BIAS(n) (((n) & 0x1f) << 20) +#define CCM_PLL5_CTRL_BIAS_MASK CCM_PLL5_CTRL_BIAS(0x1f) +#define CCM_PLL5_CTRL_BIAS_X(n) ((n) - 1) +#define CCM_PLL5_CTRL_VCO_BIAS (0x1 << 25) +#define CCM_PLL5_CTRL_DDR_CLK (0x1 << 29) +#define CCM_PLL5_CTRL_BYPASS (0x1 << 30) +#define CCM_PLL5_CTRL_EN (0x1 << 31) + +#define CCM_PLL6_CTRL_N_SHIFT 8 +#define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT) +#define CCM_PLL6_CTRL_K_SHIFT 4 +#define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT) + +#define CCM_GPS_CTRL_RESET (0x1 << 0) +#define CCM_GPS_CTRL_GATE (0x1 << 1) + +#define CCM_DRAM_CTRL_DCLK_OUT (0x1 << 15) + +#define CCM_MBUS_CTRL_M(n) (((n) & 0xf) << 0) +#define CCM_MBUS_CTRL_M_MASK CCM_MBUS_CTRL_M(0xf) +#define CCM_MBUS_CTRL_M_X(n) ((n) - 1) +#define CCM_MBUS_CTRL_N(n) (((n) & 0xf) << 16) +#define CCM_MBUS_CTRL_N_MASK CCM_MBUS_CTRL_N(0xf) +#define CCM_MBUS_CTRL_N_X(n) (((n) >> 3) ? 3 : (((n) >> 2) ? 2 : (((n) >> 1) ? 1 : 0))) +#define CCM_MBUS_CTRL_CLK_SRC(n) (((n) & 0x3) << 24) +#define CCM_MBUS_CTRL_CLK_SRC_MASK CCM_MBUS_CTRL_CLK_SRC(0x3) +#define CCM_MBUS_CTRL_CLK_SRC_HOSC 0x0 +#define CCM_MBUS_CTRL_CLK_SRC_PLL6 0x1 +#define CCM_MBUS_CTRL_CLK_SRC_PLL5 0x2 +#define CCM_MBUS_CTRL_GATE (0x1 << 31) + +#define CCM_MMC_CTRL_OSCM24 (0x0 << 24) +#define CCM_MMC_CTRL_PLL6 (0x1 << 24) +#define CCM_MMC_CTRL_PLL5 (0x2 << 24) + +#define CCM_MMC_CTRL_ENABLE (0x1 << 31) + +#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0 +#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1 +#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 +#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) +#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) + +#endif /* _SUNXI_CLOCK_SUN4I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h new file mode 100644 index 0000000..c3e636e --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h @@ -0,0 +1,16 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +#include + +void sdelay(unsigned long); + +#endif diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h new file mode 100644 index 0000000..6aacfd7 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/timer.h @@ -0,0 +1,88 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * Configuration settings for the Allwinner A10-evb board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_TIMER_H_ +#define _SUNXI_TIMER_H_ + +#ifndef __ASSEMBLY__ + +#include + +/* General purpose timer */ +struct sunxi_timer { + u32 ctl; + u32 inter; + u32 val; + u8 res[4]; +}; + +/* Audio video sync*/ +struct sunxi_avs { + u32 ctl; /* 0x80 */ + u32 cnt0; /* 0x84 */ + u32 cnt1; /* 0x88 */ + u32 div; /* 0x8c */ +}; + +/* 64 bit counter */ +struct sunxi_64cnt { + u32 ctl; /* 0xa0 */ + u32 lo; /* 0xa4 */ + u32 hi; /* 0xa8 */ +}; + +/* Watchdog */ +struct sunxi_wdog { + u32 ctl; /* 0x90 */ + u32 mode; /* 0x94 */ +}; + +/* Rtc */ +struct sunxi_rtc { + u32 ctl; /* 0x100 */ + u32 yymmdd; /* 0x104 */ + u32 hhmmss; /* 0x108 */ +}; + +/* Alarm */ +struct sunxi_alarm { + u32 ddhhmmss; /* 0x10c */ + u32 hhmmss; /* 0x110 */ + u32 en; /* 0x114 */ + u32 irqen; /* 0x118 */ + u32 irqsta; /* 0x11c */ +}; + +/* Timer general purpose register */ +struct sunxi_tgp { + u32 tgpd; +}; + +struct sunxi_timer_reg { + u32 tirqen; /* 0x00 */ + u32 tirqsta; /* 0x04 */ + u8 res1[8]; + struct sunxi_timer timer[6]; /* We have 6 timers */ + u8 res2[16]; + struct sunxi_avs avs; + struct sunxi_wdog wdog; + u8 res3[8]; + struct sunxi_64cnt cnt64; + u8 res4[0x58]; + struct sunxi_rtc rtc; + struct sunxi_alarm alarm; + struct sunxi_tgp tgp[4]; + u8 res5[8]; + u32 cpu_cfg; +}; + +#endif /* __ASSEMBLY__ */ + +#endif -- cgit v1.1 From fe1b4db05e862dec3a5668d8dc59a7505d107d8b Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 5 May 2014 11:52:24 +0100 Subject: sunxi: add sun7i pinmux and gpio support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds the basic pinmux and gpio support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Signed-off-by: Chen-Yu Tsai Signed-off-by: Hans de Goede Signed-off-by: Ma Haijun Signed-off-by: Oliver Schinagl Signed-off-by: Henrik Nordström Signed-off-by: Ian Campbell Reviewed-by: Tom Rini Acked-by: Marek Vasut Cc: Stefan Roese Cc: Tom Cubie Reviewed-by: Tom Rini --- arch/arm/cpu/armv7/sunxi/Makefile | 1 + arch/arm/cpu/armv7/sunxi/pinmux.c | 61 ++++++++++++++ arch/arm/include/asm/arch-sunxi/gpio.h | 147 +++++++++++++++++++++++++++++++++ 3 files changed, 209 insertions(+) create mode 100644 arch/arm/cpu/armv7/sunxi/pinmux.c create mode 100644 arch/arm/include/asm/arch-sunxi/gpio.h diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 440d266..529e7ec 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -9,4 +9,5 @@ # obj-y += timer.o obj-y += clock.o +obj-y += pinmux.o obj-$(CONFIG_SUN7I) += clock_sun4i.o diff --git a/arch/arm/cpu/armv7/sunxi/pinmux.c b/arch/arm/cpu/armv7/sunxi/pinmux.c new file mode 100644 index 0000000..1f2843f --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/pinmux.c @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +int sunxi_gpio_set_cfgpin(u32 pin, u32 val) +{ + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_CFG_INDEX(pin); + u32 offset = GPIO_CFG_OFFSET(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset); + + return 0; +} + +int sunxi_gpio_get_cfgpin(u32 pin) +{ + u32 cfg; + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_CFG_INDEX(pin); + u32 offset = GPIO_CFG_OFFSET(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + cfg = readl(&pio->cfg[0] + index); + cfg >>= offset; + + return cfg & 0xf; +} + +int sunxi_gpio_set_drv(u32 pin, u32 val) +{ + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_DRV_INDEX(pin); + u32 offset = GPIO_DRV_OFFSET(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + clrsetbits_le32(&pio->drv[0] + index, 0x3 << offset, val << offset); + + return 0; +} + +int sunxi_gpio_set_pull(u32 pin, u32 val) +{ + u32 bank = GPIO_BANK(pin); + u32 index = GPIO_PULL_INDEX(pin); + u32 offset = GPIO_PULL_OFFSET(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + clrsetbits_le32(&pio->pull[0] + index, 0x3 << offset, val << offset); + + return 0; +} diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h new file mode 100644 index 0000000..892479c --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -0,0 +1,147 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_GPIO_H +#define _SUNXI_GPIO_H + +#include + +/* + * sunxi has 9 banks of gpio, they are: + * PA0 - PA17 | PB0 - PB23 | PC0 - PC24 + * PD0 - PD27 | PE0 - PE31 | PF0 - PF5 + * PG0 - PG9 | PH0 - PH27 | PI0 - PI12 + */ + +#define SUNXI_GPIO_A 0 +#define SUNXI_GPIO_B 1 +#define SUNXI_GPIO_C 2 +#define SUNXI_GPIO_D 3 +#define SUNXI_GPIO_E 4 +#define SUNXI_GPIO_F 5 +#define SUNXI_GPIO_G 6 +#define SUNXI_GPIO_H 7 +#define SUNXI_GPIO_I 8 +#define SUNXI_GPIO_BANKS 9 + +struct sunxi_gpio { + u32 cfg[4]; + u32 dat; + u32 drv[2]; + u32 pull[2]; +}; + +/* gpio interrupt control */ +struct sunxi_gpio_int { + u32 cfg[3]; + u32 ctl; + u32 sta; + u32 deb; /* interrupt debounce */ +}; + +struct sunxi_gpio_reg { + struct sunxi_gpio gpio_bank[SUNXI_GPIO_BANKS]; + u8 res[0xbc]; + struct sunxi_gpio_int gpio_int; +}; + +#define BANK_TO_GPIO(bank) \ + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] + +#define GPIO_BANK(pin) ((pin) >> 5) +#define GPIO_NUM(pin) ((pin) & 0x1f) + +#define GPIO_CFG_INDEX(pin) (((pin) & 0x1f) >> 3) +#define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1f) & 0x7) << 2) + +#define GPIO_DRV_INDEX(pin) (((pin) & 0x1f) >> 4) +#define GPIO_DRV_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) + +#define GPIO_PULL_INDEX(pin) (((pin) & 0x1f) >> 4) +#define GPIO_PULL_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) + +/* GPIO bank sizes */ +#define SUNXI_GPIO_A_NR 32 +#define SUNXI_GPIO_B_NR 32 +#define SUNXI_GPIO_C_NR 32 +#define SUNXI_GPIO_D_NR 32 +#define SUNXI_GPIO_E_NR 32 +#define SUNXI_GPIO_F_NR 32 +#define SUNXI_GPIO_G_NR 32 +#define SUNXI_GPIO_H_NR 32 +#define SUNXI_GPIO_I_NR 32 + +#define SUNXI_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + 0) + +enum sunxi_gpio_number { + SUNXI_GPIO_A_START = 0, + SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A), + SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B), + SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C), + SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D), + SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E), + SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F), + SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G), + SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H), +}; + +/* SUNXI GPIO number definitions */ +#define SUNXI_GPA(_nr) (SUNXI_GPIO_A_START + (_nr)) +#define SUNXI_GPB(_nr) (SUNXI_GPIO_B_START + (_nr)) +#define SUNXI_GPC(_nr) (SUNXI_GPIO_C_START + (_nr)) +#define SUNXI_GPD(_nr) (SUNXI_GPIO_D_START + (_nr)) +#define SUNXI_GPE(_nr) (SUNXI_GPIO_E_START + (_nr)) +#define SUNXI_GPF(_nr) (SUNXI_GPIO_F_START + (_nr)) +#define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr)) +#define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr)) +#define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr)) + +/* GPIO pin function config */ +#define SUNXI_GPIO_INPUT 0 +#define SUNXI_GPIO_OUTPUT 1 + +#define SUNXI_GPA0_EMAC 2 +#define SUN7I_GPA0_GMAC 5 + +#define SUNXI_GPB0_TWI0 2 + +#define SUN4I_GPB22_UART0_TX 2 +#define SUN4I_GPB23_UART0_RX 2 + +#define SUN5I_GPB19_UART0_TX 2 +#define SUN5I_GPB20_UART0_RX 2 + +#define SUN5I_GPG3_UART1_TX 4 +#define SUN5I_GPG4_UART1_RX 4 + +#define SUNXI_GPC6_SDC2 3 + +#define SUNXI_GPF0_SDC0 2 + +#define SUNXI_GPF2_SDC0 2 +#define SUNXI_GPF2_UART0_TX 4 +#define SUNXI_GPF4_UART0_RX 4 + +#define SUN4I_GPG0_SDC1 4 + +#define SUN4I_GPH22_SDC1 5 + +#define SUN4I_GPI4_SDC3 2 + +/* GPIO pin pull-up/down config */ +#define SUNXI_GPIO_PULL_DISABLE 0 +#define SUNXI_GPIO_PULL_UP 1 +#define SUNXI_GPIO_PULL_DOWN 2 + +int sunxi_gpio_set_cfgpin(u32 pin, u32 val); +int sunxi_gpio_get_cfgpin(u32 pin); +int sunxi_gpio_set_drv(u32 pin, u32 val); +int sunxi_gpio_set_pull(u32 pin, u32 val); + +#endif /* _SUNXI_GPIO_H */ -- cgit v1.1 From 286c3c3a5eb890a917a33c9b96632549c90b2375 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 5 May 2014 11:52:25 +0100 Subject: sunxi: add sun7i dram setup support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds DRAM initialisation support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Signed-off-by: Alexandru Gagniuc Signed-off-by: Emilio López Signed-off-by: Hans de Goede Signed-off-by: Henrik Nordstrom Signed-off-by: Jens Kuske Signed-off-by: Luke Leighton Signed-off-by: Oliver Schinagl Signed-off-by: Siarhei Siamashka Signed-off-by: Stefan Roese Signed-off-by: Ian Campbell Reviewed-by: Marek Vasut Cc: Tom Cubie Reviewed-by: Tom Rini --- arch/arm/cpu/armv7/sunxi/Makefile | 1 + arch/arm/cpu/armv7/sunxi/dram.c | 593 +++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/dram.h | 179 ++++++++++ 3 files changed, 773 insertions(+) create mode 100644 arch/arm/cpu/armv7/sunxi/dram.c create mode 100644 arch/arm/include/asm/arch-sunxi/dram.h diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 529e7ec..d81d26c 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -11,3 +11,4 @@ obj-y += timer.o obj-y += clock.o obj-y += pinmux.o obj-$(CONFIG_SUN7I) += clock_sun4i.o +obj-$(CONFIG_SUN7I) += dram.o diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c new file mode 100644 index 0000000..b43c4b4 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -0,0 +1,593 @@ +/* + * sunxi DRAM controller initialization + * (C) Copyright 2012 Henrik Nordstrom + * (C) Copyright 2013 Luke Kenneth Casson Leighton + * + * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c + * and earlier U-Boot Allwiner A10 SPL work + * + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. + * Berg Xing + * Tom Cubie + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * Unfortunately the only documentation we have on the sun7i DRAM + * controller is Allwinner boot0 + boot1 code, and that code uses + * magic numbers & shifts with no explanations. Hence this code is + * rather undocumented and full of magic. + */ + +#include +#include +#include +#include +#include +#include + +#define CPU_CFG_CHIP_VER(n) ((n) << 6) +#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3) +#define CPU_CFG_CHIP_REV_A 0x0 +#define CPU_CFG_CHIP_REV_C1 0x1 +#define CPU_CFG_CHIP_REV_C2 0x2 +#define CPU_CFG_CHIP_REV_B 0x3 + +/* + * Wait up to 1s for mask to be clear in given reg. + */ +static void await_completion(u32 *reg, u32 mask) +{ + unsigned long tmo = timer_get_us() + 1000000; + + while (readl(reg) & mask) { + if (timer_get_us() > tmo) + panic("Timeout initialising DRAM\n"); + } +} + +static void mctl_ddr3_reset(void) +{ + struct sunxi_dram_reg *dram = + (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrbits_le32(&dram->mcr, DRAM_MCR_RESET); + udelay(2); + setbits_le32(&dram->mcr, DRAM_MCR_RESET); +} + +static void mctl_set_drive(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28), + DRAM_MCR_MODE_EN(0x3) | + 0xffc); +} + +static void mctl_itm_disable(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF); +} + +static void mctl_itm_enable(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF); +} + +static void mctl_enable_dll0(u32 phase) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + ((phase >> 16) & 0x3f) << 6); + clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE); + udelay(2); + + clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE); + udelay(22); + + clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET); + udelay(22); +} + +/* + * Note: This differs from pm/standby in that it checks the bus width + */ +static void mctl_enable_dllx(u32 phase) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 i, n, bus_width; + + bus_width = readl(&dram->dcr); + + if ((bus_width & DRAM_DCR_BUS_WIDTH_MASK) == + DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT)) + n = DRAM_DCR_NR_DLLCR_32BIT; + else + n = DRAM_DCR_NR_DLLCR_16BIT; + + for (i = 1; i < n; i++) { + clrsetbits_le32(&dram->dllcr[i], 0xf << 14, + (phase & 0xf) << 14); + clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET, + DRAM_DLLCR_DISABLE); + phase >>= 4; + } + udelay(2); + + for (i = 1; i < n; i++) + clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET | + DRAM_DLLCR_DISABLE); + udelay(22); + + for (i = 1; i < n; i++) + clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE, + DRAM_DLLCR_NRESET); + udelay(22); +} + +static u32 hpcr_value[32] = { +#ifdef CONFIG_SUN7I + 0x0301, 0x0301, 0x0301, 0x0301, + 0x0301, 0x0301, 0x0301, 0x0301, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0x1031, 0x1031, 0x0735, 0x1035, + 0x1035, 0x0731, 0x1031, 0x0735, + 0x1035, 0x1031, 0x0731, 0x1035, + 0x0001, 0x1031, 0, 0x1031 + /* last row differs from boot0 source table + * 0x1031, 0x0301, 0x0301, 0x0731 + * but boot0 code skips #28 and #30, and sets #29 and #31 to the + * value from #28 entry (0x1031) + */ +#endif +}; + +static void mctl_configure_hostport(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 i; + + for (i = 0; i < 32; i++) + writel(hpcr_value[i], &dram->hpcr[i]); +} + +static void mctl_setup_dram_clock(u32 clk) +{ + u32 reg_val; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* setup DRAM PLL */ + reg_val = readl(&ccm->pll5_cfg); + reg_val &= ~CCM_PLL5_CTRL_M_MASK; /* set M to 0 (x1) */ + reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */ + reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */ + reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */ + if (clk >= 540 && clk < 552) { + /* dram = 540MHz, pll5p = 540MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15)); + reg_val |= CCM_PLL5_CTRL_P(1); + } else if (clk >= 512 && clk < 528) { + /* dram = 512MHz, pll5p = 384MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16)); + reg_val |= CCM_PLL5_CTRL_P(2); + } else if (clk >= 496 && clk < 504) { + /* dram = 496MHz, pll5p = 372MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31)); + reg_val |= CCM_PLL5_CTRL_P(2); + } else if (clk >= 468 && clk < 480) { + /* dram = 468MHz, pll5p = 468MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13)); + reg_val |= CCM_PLL5_CTRL_P(1); + } else if (clk >= 396 && clk < 408) { + /* dram = 396MHz, pll5p = 396MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11)); + reg_val |= CCM_PLL5_CTRL_P(1); + } else { + /* any other frequency that is a multiple of 24 */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24)); + reg_val |= CCM_PLL5_CTRL_P(CCM_PLL5_CTRL_P_X(2)); + } + reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */ + reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */ + writel(reg_val, &ccm->pll5_cfg); + udelay(5500); + + setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK); + +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) + /* reset GPS */ + clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE); + setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); + udelay(1); + clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); +#endif + + /* setup MBUS clock */ + reg_val = CCM_MBUS_CTRL_GATE | + CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) | + CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) | + CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2)); + writel(reg_val, &ccm->mbus_clk_cfg); + + /* + * open DRAMC AHB & DLL register clock + * close it first + */ + clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); + udelay(22); + + /* then open it */ + setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); + udelay(22); +} + +static int dramc_scan_readpipe(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 reg_val; + + /* data training trigger */ +#ifdef CONFIG_SUN7I + clrbits_le32(&dram->csr, DRAM_CSR_FAILED); +#endif + setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING); + + /* check whether data training process has completed */ + await_completion(&dram->ccr, DRAM_CCR_DATA_TRAINING); + + /* check data training result */ + reg_val = readl(&dram->csr); + if (reg_val & DRAM_CSR_FAILED) + return -1; + + return 0; +} + +static int dramc_scan_dll_para(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + const u32 dqs_dly[7] = {0x3, 0x2, 0x1, 0x0, 0xe, 0xd, 0xc}; + const u32 clk_dly[15] = {0x07, 0x06, 0x05, 0x04, 0x03, + 0x02, 0x01, 0x00, 0x08, 0x10, + 0x18, 0x20, 0x28, 0x30, 0x38}; + u32 clk_dqs_count[15]; + u32 dqs_i, clk_i, cr_i; + u32 max_val, min_val; + u32 dqs_index, clk_index; + + /* Find DQS_DLY Pass Count for every CLK_DLY */ + for (clk_i = 0; clk_i < 15; clk_i++) { + clk_dqs_count[clk_i] = 0; + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + (clk_dly[clk_i] & 0x3f) << 6); + for (dqs_i = 0; dqs_i < 7; dqs_i++) { + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_i] & 0x4f) << 14); + } + udelay(2); + if (dramc_scan_readpipe() == 0) + clk_dqs_count[clk_i]++; + } + } + /* Test DQS_DLY Pass Count for every CLK_DLY from up to down */ + for (dqs_i = 15; dqs_i > 0; dqs_i--) { + max_val = 15; + min_val = 15; + for (clk_i = 0; clk_i < 15; clk_i++) { + if (clk_dqs_count[clk_i] == dqs_i) { + max_val = clk_i; + if (min_val == 15) + min_val = clk_i; + } + } + if (max_val < 15) + break; + } + + /* Check if Find a CLK_DLY failed */ + if (!dqs_i) + goto fail; + + /* Find the middle index of CLK_DLY */ + clk_index = (max_val + min_val) >> 1; + if ((max_val == (15 - 1)) && (min_val > 0)) + /* if CLK_DLY[MCTL_CLK_DLY_COUNT] is very good, then the middle + * value can be more close to the max_val + */ + clk_index = (15 + clk_index) >> 1; + else if ((max_val < (15 - 1)) && (min_val == 0)) + /* if CLK_DLY[0] is very good, then the middle value can be more + * close to the min_val + */ + clk_index >>= 1; + if (clk_dqs_count[clk_index] < dqs_i) + clk_index = min_val; + + /* Find the middle index of DQS_DLY for the CLK_DLY got above, and Scan + * read pipe again + */ + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + (clk_dly[clk_index] & 0x3f) << 6); + max_val = 7; + min_val = 7; + for (dqs_i = 0; dqs_i < 7; dqs_i++) { + clk_dqs_count[dqs_i] = 0; + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_i] & 0x4f) << 14); + } + udelay(2); + if (dramc_scan_readpipe() == 0) { + clk_dqs_count[dqs_i] = 1; + max_val = dqs_i; + if (min_val == 7) + min_val = dqs_i; + } + } + + if (max_val < 7) { + dqs_index = (max_val + min_val) >> 1; + if ((max_val == (7-1)) && (min_val > 0)) + dqs_index = (7 + dqs_index) >> 1; + else if ((max_val < (7-1)) && (min_val == 0)) + dqs_index >>= 1; + if (!clk_dqs_count[dqs_index]) + dqs_index = min_val; + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_index] & 0x4f) << 14); + } + udelay(2); + return dramc_scan_readpipe(); + } + +fail: + clrbits_le32(&dram->dllcr[0], 0x3f << 6); + for (cr_i = 1; cr_i < 5; cr_i++) + clrbits_le32(&dram->dllcr[cr_i], 0x4f << 14); + udelay(2); + + return dramc_scan_readpipe(); +} + +static void dramc_clock_output_en(u32 on) +{ +#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + if (on) + setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); + else + clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); +#endif +} + +static const u16 tRFC_table[2][6] = { + /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */ + /* DDR2 75ns 105ns 127.5ns 195ns 327.5ns invalid */ + { 77, 108, 131, 200, 336, 336 }, + /* DDR3 invalid 90ns 110ns 160ns 300ns 350ns */ + { 93, 93, 113, 164, 308, 359 } +}; + +static void dramc_set_autorefresh_cycle(u32 clk, u32 type, u32 density) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 tRFC, tREFI; + + tRFC = (tRFC_table[type][density] * clk + 1023) >> 10; + tREFI = (7987 * clk) >> 10; /* <= 7.8us */ + + writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr); +} + +unsigned long dramc_init(struct dram_para *para) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 reg_val; + u32 density; + int ret_val; + + /* check input dram parameter structure */ + if (!para) + return 0; + + /* setup DRAM relative clock */ + mctl_setup_dram_clock(para->clock); + + /* reset external DRAM */ + mctl_set_drive(); + + /* dram clock off */ + dramc_clock_output_en(0); + + mctl_itm_disable(); + mctl_enable_dll0(para->tpr3); + + /* configure external DRAM */ + reg_val = 0x0; + if (para->type == DRAM_MEMORY_TYPE_DDR3) + reg_val |= DRAM_DCR_TYPE_DDR3; + reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3); + + if (para->density == 256) + density = DRAM_DCR_CHIP_DENSITY_256M; + else if (para->density == 512) + density = DRAM_DCR_CHIP_DENSITY_512M; + else if (para->density == 1024) + density = DRAM_DCR_CHIP_DENSITY_1024M; + else if (para->density == 2048) + density = DRAM_DCR_CHIP_DENSITY_2048M; + else if (para->density == 4096) + density = DRAM_DCR_CHIP_DENSITY_4096M; + else if (para->density == 8192) + density = DRAM_DCR_CHIP_DENSITY_8192M; + else + density = DRAM_DCR_CHIP_DENSITY_256M; + + reg_val |= DRAM_DCR_CHIP_DENSITY(density); + reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1); + reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1); + reg_val |= DRAM_DCR_CMD_RANK_ALL; + reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE); + writel(reg_val, &dram->dcr); + +#ifdef CONFIG_SUN7I + setbits_le32(&dram->zqcr1, (0x1 << 24) | (0x1 << 1)); + if (para->tpr4 & 0x2) + clrsetbits_le32(&dram->zqcr1, (0x1 << 24), (0x1 << 1)); + dramc_clock_output_en(1); +#endif + +#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)) + /* set odt impendance divide ratio */ + reg_val = ((para->zq) >> 8) & 0xfffff; + reg_val |= ((para->zq) & 0xff) << 20; + reg_val |= (para->zq) & 0xf0000000; + writel(reg_val, &dram->zqcr0); +#endif + +#ifdef CONFIG_SUN7I + /* Set CKE Delay to about 1ms */ + setbits_le32(&dram->idcr, 0x1ffff); +#endif + +#ifdef CONFIG_SUN7I + if ((readl(&dram->ppwrsctl) & 0x1) != 0x1) + mctl_ddr3_reset(); + else + setbits_le32(&dram->mcr, DRAM_MCR_RESET); +#endif + + udelay(1); + + await_completion(&dram->ccr, DRAM_CCR_INIT); + + mctl_enable_dllx(para->tpr3); + + /* set refresh period */ + dramc_set_autorefresh_cycle(para->clock, para->type - 2, density); + + /* set timing parameters */ + writel(para->tpr0, &dram->tpr0); + writel(para->tpr1, &dram->tpr1); + writel(para->tpr2, &dram->tpr2); + + if (para->type == DRAM_MEMORY_TYPE_DDR3) { + reg_val = DRAM_MR_BURST_LENGTH(0x0); +#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)) + reg_val |= DRAM_MR_POWER_DOWN; +#endif + reg_val |= DRAM_MR_CAS_LAT(para->cas - 4); + reg_val |= DRAM_MR_WRITE_RECOVERY(0x5); + } else if (para->type == DRAM_MEMORY_TYPE_DDR2) { + reg_val = DRAM_MR_BURST_LENGTH(0x2); + reg_val |= DRAM_MR_CAS_LAT(para->cas); + reg_val |= DRAM_MR_WRITE_RECOVERY(0x5); + } + writel(reg_val, &dram->mr); + + writel(para->emr1, &dram->emr); + writel(para->emr2, &dram->emr2); + writel(para->emr3, &dram->emr3); + + /* set DQS window mode */ + clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE); + +#ifdef CONFIG_SUN7I + /* Command rate timing mode 2T & 1T */ + if (para->tpr4 & 0x1) + setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T); +#endif + /* reset external DRAM */ + setbits_le32(&dram->ccr, DRAM_CCR_INIT); + await_completion(&dram->ccr, DRAM_CCR_INIT); + +#ifdef CONFIG_SUN7I + /* setup zq calibration manual */ + reg_val = readl(&dram->ppwrsctl); + if ((reg_val & 0x1) == 1) { + /* super_standby_flag = 1 */ + + reg_val = readl(0x01c20c00 + 0x120); /* rtc */ + reg_val &= 0x000fffff; + reg_val |= 0x17b00000; + writel(reg_val, &dram->zqcr0); + + /* exit self-refresh state */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27); + /* check whether command has been executed */ + await_completion(&dram->dcr, 0x1 << 31); + + udelay(2); + + /* dram pad hold off */ + setbits_le32(&dram->ppwrsctl, 0x16510000); + + await_completion(&dram->ppwrsctl, 0x1); + + /* exit self-refresh state */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27); + + /* check whether command has been executed */ + await_completion(&dram->dcr, 0x1 << 31); + + udelay(2); + + /* issue a refresh command */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x13 << 27); + await_completion(&dram->dcr, 0x1 << 31); + + udelay(2); + } +#endif + + /* scan read pipe value */ + mctl_itm_enable(); + if (para->tpr3 & (0x1 << 31)) { + ret_val = dramc_scan_dll_para(); + if (ret_val == 0) + para->tpr3 = + (((readl(&dram->dllcr[0]) >> 6) & 0x3f) << 16) | + (((readl(&dram->dllcr[1]) >> 14) & 0xf) << 0) | + (((readl(&dram->dllcr[2]) >> 14) & 0xf) << 4) | + (((readl(&dram->dllcr[3]) >> 14) & 0xf) << 8) | + (((readl(&dram->dllcr[4]) >> 14) & 0xf) << 12 + ); + } else { + ret_val = dramc_scan_readpipe(); + } + + if (ret_val < 0) + return 0; + + /* configure all host port */ + mctl_configure_hostport(); + + return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE); +} diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h new file mode 100644 index 0000000..67fbfad --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -0,0 +1,179 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. + * Berg Xing + * Tom Cubie + * + * Sunxi platform dram register definition. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_DRAM_H +#define _SUNXI_DRAM_H + +#include + +struct sunxi_dram_reg { + u32 ccr; /* 0x00 controller configuration register */ + u32 dcr; /* 0x04 dram configuration register */ + u32 iocr; /* 0x08 i/o configuration register */ + u32 csr; /* 0x0c controller status register */ + u32 drr; /* 0x10 dram refresh register */ + u32 tpr0; /* 0x14 dram timing parameters register 0 */ + u32 tpr1; /* 0x18 dram timing parameters register 1 */ + u32 tpr2; /* 0x1c dram timing parameters register 2 */ + u32 gdllcr; /* 0x20 global dll control register */ + u8 res0[0x28]; + u32 rslr0; /* 0x4c rank system latency register */ + u32 rslr1; /* 0x50 rank system latency register */ + u8 res1[0x8]; + u32 rdgr0; /* 0x5c rank dqs gating register */ + u32 rdgr1; /* 0x60 rank dqs gating register */ + u8 res2[0x34]; + u32 odtcr; /* 0x98 odt configuration register */ + u32 dtr0; /* 0x9c data training register 0 */ + u32 dtr1; /* 0xa0 data training register 1 */ + u32 dtar; /* 0xa4 data training address register */ + u32 zqcr0; /* 0xa8 zq control register 0 */ + u32 zqcr1; /* 0xac zq control register 1 */ + u32 zqsr; /* 0xb0 zq status register */ + u32 idcr; /* 0xb4 initializaton delay configure reg */ + u8 res3[0x138]; + u32 mr; /* 0x1f0 mode register */ + u32 emr; /* 0x1f4 extended mode register */ + u32 emr2; /* 0x1f8 extended mode register */ + u32 emr3; /* 0x1fc extended mode register */ + u32 dllctr; /* 0x200 dll control register */ + u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */ + /* 0x208 dll control register 1(byte 1) */ + /* 0x20c dll control register 2(byte 2) */ + /* 0x210 dll control register 3(byte 3) */ + /* 0x214 dll control register 4(byte 4) */ + u32 dqtr0; /* 0x218 dq timing register */ + u32 dqtr1; /* 0x21c dq timing register */ + u32 dqtr2; /* 0x220 dq timing register */ + u32 dqtr3; /* 0x224 dq timing register */ + u32 dqstr; /* 0x228 dqs timing register */ + u32 dqsbtr; /* 0x22c dqsb timing register */ + u32 mcr; /* 0x230 mode configure register */ + u8 res[0x8]; + u32 ppwrsctl; /* 0x23c pad power save control */ + u32 apr; /* 0x240 arbiter period register */ + u32 pldtr; /* 0x244 priority level data threshold reg */ + u8 res5[0x8]; + u32 hpcr[32]; /* 0x250 host port configure register */ + u8 res6[0x10]; + u32 csel; /* 0x2e0 controller select register */ +}; + +struct dram_para { + u32 clock; + u32 type; + u32 rank_num; + u32 density; + u32 io_width; + u32 bus_width; + u32 cas; + u32 zq; + u32 odt_en; + u32 size; + u32 tpr0; + u32 tpr1; + u32 tpr2; + u32 tpr3; + u32 tpr4; + u32 tpr5; + u32 emr1; + u32 emr2; + u32 emr3; +}; + +#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5) +#define DRAM_CCR_DQS_GATE (0x1 << 14) +#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17) +#define DRAM_CCR_ITM_OFF (0x1 << 28) +#define DRAM_CCR_DATA_TRAINING (0x1 << 30) +#define DRAM_CCR_INIT (0x1 << 31) + +#define DRAM_MEMORY_TYPE_DDR1 1 +#define DRAM_MEMORY_TYPE_DDR2 2 +#define DRAM_MEMORY_TYPE_DDR3 3 +#define DRAM_MEMORY_TYPE_LPDDR2 4 +#define DRAM_MEMORY_TYPE_LPDDR 5 +#define DRAM_DCR_TYPE (0x1 << 0) +#define DRAM_DCR_TYPE_DDR2 0x0 +#define DRAM_DCR_TYPE_DDR3 0x1 +#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1) +#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3) +#define DRAM_DCR_IO_WIDTH_8BIT 0x0 +#define DRAM_DCR_IO_WIDTH_16BIT 0x1 +#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3) +#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7) +#define DRAM_DCR_CHIP_DENSITY_256M 0x0 +#define DRAM_DCR_CHIP_DENSITY_512M 0x1 +#define DRAM_DCR_CHIP_DENSITY_1024M 0x2 +#define DRAM_DCR_CHIP_DENSITY_2048M 0x3 +#define DRAM_DCR_CHIP_DENSITY_4096M 0x4 +#define DRAM_DCR_CHIP_DENSITY_8192M 0x5 +#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6) +#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7) +#define DRAM_DCR_BUS_WIDTH_32BIT 0x3 +#define DRAM_DCR_BUS_WIDTH_16BIT 0x1 +#define DRAM_DCR_BUS_WIDTH_8BIT 0x0 +#define DRAM_DCR_NR_DLLCR_32BIT 5 +#define DRAM_DCR_NR_DLLCR_16BIT 3 +#define DRAM_DCR_NR_DLLCR_8BIT 2 +#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10) +#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3) +#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12) +#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13) +#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3) +#define DRAM_DCR_MODE_SEQ 0x0 +#define DRAM_DCR_MODE_INTERLEAVE 0x1 + +#define DRAM_CSR_FAILED (0x1 << 20) + +#define DRAM_DRR_TRFC(n) ((n) & 0xff) +#define DRAM_DRR_TREFI(n) (((n) & 0xffff) << 8) +#define DRAM_DRR_BURST(n) ((((n) - 1) & 0xf) << 24) + +#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0) +#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3) +#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2) +#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3) +#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4) +#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3) +#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6) +#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3) +#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8) +#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7) +#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11) +#define DRAM_MCR_RESET (0x1 << 12) +#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13) +#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3) +#define DRAM_MCR_DCLK_OUT (0x1 << 16) + +#define DRAM_DLLCR_NRESET (0x1 << 30) +#define DRAM_DLLCR_DISABLE (0x1 << 31) + +#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20) +#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff) + +#define DRAM_IOCR_ODT_EN(n) ((((n) & 0x3) << 30) | ((n) & 0x3) << 0) +#define DRAM_IOCR_ODT_EN_MASK DRAM_IOCR_ODT_EN(0x3) + +#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0) +#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7) +#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4) +#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7) +#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9) +#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7) +#define DRAM_MR_POWER_DOWN (0x1 << 12) + +#define DRAM_CSEL_MAGIC 0x16237495 + +unsigned long sunxi_dram_init(void); +unsigned long dramc_init(struct dram_para *para); + +#endif /* _SUNXI_DRAM_H */ -- cgit v1.1 From cba69eeeaa67d3fb93ec6f3abab1f653abf895a9 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 5 May 2014 11:52:26 +0100 Subject: sunxi: add sun7i cpu, board and start of day support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds generic board, start of day and basic build system support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Signed-off-by: Adam Sampson Signed-off-by: Aleksei Mamlin Signed-off-by: Alexandru Gagniuc Signed-off-by: Chen-Yu Tsai Signed-off-by: Emilio López Signed-off-by: Hans de Goede Signed-off-by: Henrik Nordstrom Signed-off-by: Jens Kuske Signed-off-by: Luc Verhaegen Signed-off-by: Luke Leighton Signed-off-by: Oliver Schinagl Signed-off-by: Patrick Wood Signed-off-by: Stefan Roese Signed-off-by: Wills Wang Signed-off-by: Ian Campbell Reviewed-by: Marek Vasut Cc: Tom Cubie Reviewed-by: Tom Rini --- arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/sunxi/Makefile | 11 +++ arch/arm/cpu/armv7/sunxi/board.c | 88 +++++++++++++++++ arch/arm/cpu/armv7/sunxi/cpu_info.c | 19 ++++ arch/arm/cpu/armv7/sunxi/start.c | 1 + arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds | 77 +++++++++++++++ arch/arm/include/asm/arch-sunxi/cpu.h | 122 ++++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/spl.h | 20 ++++ board/sunxi/Makefile | 11 +++ board/sunxi/board.c | 57 +++++++++++ include/configs/sun7i.h | 24 +++++ include/configs/sunxi-common.h | 141 ++++++++++++++++++++++++++++ 12 files changed, 572 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/armv7/sunxi/board.c create mode 100644 arch/arm/cpu/armv7/sunxi/cpu_info.c create mode 100644 arch/arm/cpu/armv7/sunxi/start.c create mode 100644 arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds create mode 100644 arch/arm/include/asm/arch-sunxi/cpu.h create mode 100644 arch/arm/include/asm/arch-sunxi/spl.h create mode 100644 board/sunxi/Makefile create mode 100644 board/sunxi/board.c create mode 100644 include/configs/sun7i.h create mode 100644 include/configs/sunxi-common.h diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index ab869b1..232118d 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -12,7 +12,7 @@ obj-y += cache_v7.o obj-y += cpu.o obj-y += syslib.o -ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY),) +ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI),) ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y) obj-y += lowlevel_init.o endif diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index d81d26c..a64bfa1 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -8,7 +8,18 @@ # SPDX-License-Identifier: GPL-2.0+ # obj-y += timer.o +obj-y += board.o obj-y += clock.o obj-y += pinmux.o obj-$(CONFIG_SUN7I) += clock_sun4i.o + +ifndef CONFIG_SPL_BUILD +obj-y += cpu_info.o +endif + +ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SUN7I) += dram.o +ifdef CONFIG_SPL_FEL +obj-y += start.o +endif +endif diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c new file mode 100644 index 0000000..b5c0cb7 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -0,0 +1,88 @@ +/* + * (C) Copyright 2012 Henrik Nordstrom + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * Some init for sunxi platform. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#ifdef CONFIG_SPL_BUILD +#include +#endif +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_SPL_BUILD +/* Pointer to the global data structure for SPL */ +DECLARE_GLOBAL_DATA_PTR; + +/* The sunxi internal brom will try to loader external bootloader + * from mmc0, nand flash, mmc2. + * Unfortunately we can't check how SPL was loaded so assume + * it's always the first SD/MMC controller + */ +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_MMC1; +} + +/* No confirmation data available in SPL yet. Hardcode bootmode */ +u32 spl_boot_mode(void) +{ + return MMCSD_MODE_RAW; +} +#endif + +int gpio_init(void) +{ + sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); + sunxi_gpio_set_pull(SUNXI_GPB(23), 1); + + return 0; +} + +void reset_cpu(ulong addr) +{ +} + +/* do some early init */ +void s_init(void) +{ +#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I) + /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */ + asm volatile( + "mrc p15, 0, r0, c1, c0, 1\n" + "orr r0, r0, #1 << 6\n" + "mcr p15, 0, r0, c1, c0, 1\n"); +#endif + + clock_init(); + timer_init(); + gpio_init(); + +#ifdef CONFIG_SPL_BUILD + gd = &gdata; + preloader_console_init(); + + sunxi_board_init(); +#endif +} + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c new file mode 100644 index 0000000..b4c3d5c --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -0,0 +1,19 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#ifdef CONFIG_DISPLAY_CPUINFO +int print_cpuinfo(void) +{ + puts("CPU: Allwinner A20 (SUN7I)\n"); + return 0; +} +#endif diff --git a/arch/arm/cpu/armv7/sunxi/start.c b/arch/arm/cpu/armv7/sunxi/start.c new file mode 100644 index 0000000..6b392fa --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/start.c @@ -0,0 +1 @@ +/* Intentionally empty. Only needed to get FEL SPL link line right */ diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds new file mode 100644 index 0000000..364e35c --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2013 + * Henrik Nordstrom + * + * SPDX-License-Identifier: GPL-2.0+ + */ +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(s_init) +SECTIONS +{ + . = 0x00002000; + + . = ALIGN(4); + .text : + { + *(.text.s_init) + *(.text*) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { + *(.data*) + } + + . = ALIGN(4); + . = .; + + . = ALIGN(4); + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .dynsym : { + __dynsym_start = .; + *(.dynsym) + } + + . = ALIGN(4); + .note.gnu.build-id : + { + *(.note.gnu.build-id) + } + _end = .; + + . = ALIGN(4096); + .mmutable : { + *(.mmutable) + } + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + __bss_base = .; + } + + .bss __bss_base (OVERLAY) : { + *(.bss*) + . = ALIGN(4); + __bss_limit = .; + } + + .bss_end __bss_limit (OVERLAY) : { + KEEP(*(.__bss_end)); + } + + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } + /DISCARD/ : { *(.note*) } +} diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h new file mode 100644 index 0000000..a987e51d --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CPU_H +#define _SUNXI_CPU_H + +#define SUNXI_SRAM_A1_BASE 0x00000000 +#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16 kiB */ + +#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16 kiB */ +#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13 kiB */ +#define SUNXI_SRAM_A4_BASE 0x0000b400 /* 3 kiB */ +#define SUNXI_SRAM_D_BASE 0x00010000 /* 4 kiB */ +#define SUNXI_SRAM_B_BASE 0x00020000 /* 64 kiB (secure) */ + +#define SUNXI_SRAMC_BASE 0x01c00000 +#define SUNXI_DRAMC_BASE 0x01c01000 +#define SUNXI_DMA_BASE 0x01c02000 +#define SUNXI_NFC_BASE 0x01c03000 +#define SUNXI_TS_BASE 0x01c04000 +#define SUNXI_SPI0_BASE 0x01c05000 +#define SUNXI_SPI1_BASE 0x01c06000 +#define SUNXI_MS_BASE 0x01c07000 +#define SUNXI_TVD_BASE 0x01c08000 +#define SUNXI_CSI0_BASE 0x01c09000 +#define SUNXI_TVE0_BASE 0x01c0a000 +#define SUNXI_EMAC_BASE 0x01c0b000 +#define SUNXI_LCD0_BASE 0x01c0C000 +#define SUNXI_LCD1_BASE 0x01c0d000 +#define SUNXI_VE_BASE 0x01c0e000 +#define SUNXI_MMC0_BASE 0x01c0f000 +#define SUNXI_MMC1_BASE 0x01c10000 +#define SUNXI_MMC2_BASE 0x01c11000 +#define SUNXI_MMC3_BASE 0x01c12000 +#define SUNXI_USB0_BASE 0x01c13000 +#define SUNXI_USB1_BASE 0x01c14000 +#define SUNXI_SS_BASE 0x01c15000 +#define SUNXI_HDMI_BASE 0x01c16000 +#define SUNXI_SPI2_BASE 0x01c17000 +#define SUNXI_SATA_BASE 0x01c18000 +#define SUNXI_PATA_BASE 0x01c19000 +#define SUNXI_ACE_BASE 0x01c1a000 +#define SUNXI_TVE1_BASE 0x01c1b000 +#define SUNXI_USB2_BASE 0x01c1c000 +#define SUNXI_CSI1_BASE 0x01c1d000 +#define SUNXI_TZASC_BASE 0x01c1e000 +#define SUNXI_SPI3_BASE 0x01c1f000 + +#define SUNXI_CCM_BASE 0x01c20000 +#define SUNXI_INTC_BASE 0x01c20400 +#define SUNXI_PIO_BASE 0x01c20800 +#define SUNXI_TIMER_BASE 0x01c20c00 +#define SUNXI_SPDIF_BASE 0x01c21000 +#define SUNXI_AC97_BASE 0x01c21400 +#define SUNXI_IR0_BASE 0x01c21800 +#define SUNXI_IR1_BASE 0x01c21c00 + +#define SUNXI_IIS_BASE 0x01c22400 +#define SUNXI_LRADC_BASE 0x01c22800 +#define SUNXI_AD_DA_BASE 0x01c22c00 +#define SUNXI_KEYPAD_BASE 0x01c23000 +#define SUNXI_TZPC_BASE 0x01c23400 +#define SUNXI_SID_BASE 0x01c23800 +#define SUNXI_SJTAG_BASE 0x01c23c00 + +#define SUNXI_TP_BASE 0x01c25000 +#define SUNXI_PMU_BASE 0x01c25400 +#define SUNXI_CPUCFG_BASE 0x01c25c00 + +#define SUNXI_UART0_BASE 0x01c28000 +#define SUNXI_UART1_BASE 0x01c28400 +#define SUNXI_UART2_BASE 0x01c28800 +#define SUNXI_UART3_BASE 0x01c28c00 +#define SUNXI_UART4_BASE 0x01c29000 +#define SUNXI_UART5_BASE 0x01c29400 +#define SUNXI_UART6_BASE 0x01c29800 +#define SUNXI_UART7_BASE 0x01c29c00 +#define SUNXI_PS2_0_BASE 0x01c2a000 +#define SUNXI_PS2_1_BASE 0x01c2a400 + +#define SUNXI_TWI0_BASE 0x01c2ac00 +#define SUNXI_TWI1_BASE 0x01c2b000 +#define SUNXI_TWI2_BASE 0x01c2b400 + +#define SUNXI_CAN_BASE 0x01c2bc00 + +#define SUNXI_SCR_BASE 0x01c2c400 + +#define SUNXI_GPS_BASE 0x01c30000 +#define SUNXI_MALI400_BASE 0x01c40000 +#define SUNXI_GMAC_BASE 0x01c50000 + +/* module sram */ +#define SUNXI_SRAM_C_BASE 0x01d00000 + +#define SUNXI_DE_FE0_BASE 0x01e00000 +#define SUNXI_DE_FE1_BASE 0x01e20000 +#define SUNXI_DE_BE0_BASE 0x01e60000 +#define SUNXI_DE_BE1_BASE 0x01e40000 +#define SUNXI_MP_BASE 0x01e80000 +#define SUNXI_AVG_BASE 0x01ea0000 + +/* CoreSight Debug Module */ +#define SUNXI_CSDM_BASE 0x3f500000 + +#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2 GiB */ + +#define SUNXI_BROM_BASE 0xffff0000 /* 32 kiB */ + +#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c) + +#ifndef __ASSEMBLY__ +void sunxi_board_init(void); +void sunxi_reset(void); +#endif /* __ASSEMBLY__ */ + +#endif /* _CPU_H */ diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h new file mode 100644 index 0000000..ff871bc --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/spl.h @@ -0,0 +1,20 @@ +/* + * This is a copy of omap3/spl.h: + * + * (C) Copyright 2012 + * Texas Instruments, + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_SPL_H_ + +#define BOOT_DEVICE_NONE 0 +#define BOOT_DEVICE_XIP 1 +#define BOOT_DEVICE_NAND 2 +#define BOOT_DEVICE_ONE_NAND 3 +#define BOOT_DEVICE_MMC2 5 /*emmc*/ +#define BOOT_DEVICE_MMC1 6 +#define BOOT_DEVICE_XIPWAIT 7 +#define BOOT_DEVICE_MMC2_2 0xff +#endif diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile new file mode 100644 index 0000000..559112e --- /dev/null +++ b/board/sunxi/Makefile @@ -0,0 +1,11 @@ +# +# (C) Copyright 2012 Henrik Nordstrom +# +# Based on some other board Makefile +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# +obj-y += board.o diff --git a/board/sunxi/board.c b/board/sunxi/board.c new file mode 100644 index 0000000..328334a --- /dev/null +++ b/board/sunxi/board.c @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2012-2013 Henrik Nordstrom + * (C) Copyright 2013 Luke Kenneth Casson Leighton + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * Some board init for the Allwinner A10-evb board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* add board specific code here */ +int board_init(void) +{ + int id_pfr1; + + gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100); + + asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1)); + debug("id_pfr1: 0x%08x\n", id_pfr1); + /* Generic Timer Extension available? */ + if ((id_pfr1 >> 16) & 0xf) { + debug("Setting CNTFRQ\n"); + /* CNTFRQ == 24 MHz */ + asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000)); + } + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE); + + return 0; +} + +#ifdef CONFIG_SPL_BUILD +void sunxi_board_init(void) +{ + unsigned long ramsize; + + printf("DRAM:"); + ramsize = sunxi_dram_init(); + printf(" %lu MiB\n", ramsize >> 20); + if (!ramsize) + hang(); +} +#endif diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h new file mode 100644 index 0000000..9b693f7 --- /dev/null +++ b/include/configs/sun7i.h @@ -0,0 +1,24 @@ +/* + * (C) Copyright 2012-2013 Henrik Nordstrom + * (C) Copyright 2013 Luke Kenneth Casson Leighton + * + * Configuration settings for the Allwinner A20 (sun7i) CPU + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * A20 specific configuration + */ +#define CONFIG_SUN7I /* sun7i SoC generation */ + +#define CONFIG_SYS_PROMPT "sun7i# " + +/* + * Include common sunxi configuration where most the settings are + */ +#include + +#endif /* __CONFIG_H */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h new file mode 100644 index 0000000..3f7e314 --- /dev/null +++ b/include/configs/sunxi-common.h @@ -0,0 +1,141 @@ +/* + * (C) Copyright 2012-2012 Henrik Nordstrom + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * Configuration settings for the Allwinner sunxi series of boards. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_COMMON_CONFIG_H +#define _SUNXI_COMMON_CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_SUNXI /* sunxi family */ + +#include /* get chip and board defs */ + +#define CONFIG_SYS_TEXT_BASE 0x4a000000 + +/* + * Display CPU information + */ +#define CONFIG_DISPLAY_CPUINFO + +/* Serial & console */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +/* ns16550 reg in the low bits of cpu reg */ +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_CLK 24000000 +#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE +#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE +#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE +#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE + +/* DRAM Base */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_INIT_RAM_ADDR 0x0 +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE +#define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_SETEXPR + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG + +/* 4MB of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) + +/* + * Miscellaneous configurable options + */ +#define CONFIG_CMD_ECHO +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_GENERIC_BOARD + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR 0x48000000 /* default load address */ + +/* standalone support */ +#define CONFIG_STANDALONE_LOAD_ADDR 0x48000000 + +#define CONFIG_SYS_HZ 1000 + +/* baudrate */ +#define CONFIG_BAUDRATE 115200 + +/* The stack sizes are set up in start.S using the settings below */ +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ + +/* FLASH and environment organization */ + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* 512 KiB */ +#define CONFIG_IDENT_STRING " Allwinner Technology" + +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootm_size=0x10000000\0" + +#define CONFIG_SYS_BOOT_GET_CMDLINE + +#include + +#define CONFIG_FAT_WRITE /* enable write access */ + +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT + +#define CONFIG_SPL +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds" +#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi" +#define CONFIG_SPL_TEXT_BASE 0x2000 +#define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */ +/* end of 32 KiB in sram */ +#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK +#define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */ + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + +#define CONFIG_CONS_INDEX 1 /* UART0 */ + +#if !defined CONFIG_ENV_IS_IN_MMC && \ + !defined CONFIG_ENV_IS_IN_NAND && \ + !defined CONFIG_ENV_IS_IN_FAT && \ + !defined CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_IS_NOWHERE +#endif + +#ifndef CONFIG_SPL_BUILD +#include +#endif + +#endif /* _SUNXI_COMMON_CONFIG_H */ -- cgit v1.1 From 7d20d7eb1334706546708acd966c0c7f807726e8 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 5 May 2014 11:52:27 +0100 Subject: sunxi: add support for Cubietruck booting in FEL mode Signed-off-by: Oliver Schinagl Signed-off-by: Jens Kuske Signed-off-by: Ian Campbell Reviewed-by: Tom Rini Reviewed-by: Marek Vasut --- board/sunxi/Makefile | 1 + board/sunxi/dram_cubietruck.c | 31 +++++++++++++++++++++++++++++++ boards.cfg | 1 + 3 files changed, 33 insertions(+) create mode 100644 board/sunxi/dram_cubietruck.c diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile index 559112e..18b1e11 100644 --- a/board/sunxi/Makefile +++ b/board/sunxi/Makefile @@ -9,3 +9,4 @@ # SPDX-License-Identifier: GPL-2.0+ # obj-y += board.o +obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o diff --git a/board/sunxi/dram_cubietruck.c b/board/sunxi/dram_cubietruck.c new file mode 100644 index 0000000..fbcd687 --- /dev/null +++ b/board/sunxi/dram_cubietruck.c @@ -0,0 +1,31 @@ +/* this file is generated, don't edit it yourself */ + +#include +#include + +static struct dram_para dram_para = { + .clock = 432, + .type = 3, + .rank_num = 1, + .density = 4096, + .io_width = 8, + .bus_width = 32, + .cas = 9, + .zq = 0x7f, + .odt_en = 0, + .size = 2048, + .tpr0 = 0x42d899b7, + .tpr1 = 0xa090, + .tpr2 = 0x22a00, + .tpr3 = 0x0, + .tpr4 = 0x1, + .tpr5 = 0x0, + .emr1 = 0x4, + .emr2 = 0x10, + .emr3 = 0x0, +}; + +unsigned long sunxi_dram_init(void) +{ + return dramc_init(&dram_para); +} diff --git a/boards.cfg b/boards.cfg index c40937f..db3a6ae 100644 --- a/boards.cfg +++ b/boards.cfg @@ -379,6 +379,7 @@ Active arm armv7 rmobile renesas lager Active arm armv7 s5pc1xx samsung goni s5p_goni - Przemyslaw Marczak Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - +Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL - Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang -- cgit v1.1 From 5835823da3a357468bc90c2b74bad3193555b918 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 5 May 2014 11:52:28 +0100 Subject: sunxi: add gmac Ethernet support Add support for the GMAC Ethernet controller on Allwinner A20 (sun7i) processors. Enable for the Cubietruck. Signed-off-by: Chen-Yu Tsai Signed-off-by: Jens Kuske Signed-off-by: Ian Campbell Reviewed-by: Marek Vasut Reviewed-by: Tom Rini --- arch/arm/cpu/armv7/sunxi/board.c | 23 +++++++++++++++++++++++ board/sunxi/Makefile | 1 + board/sunxi/gmac.c | 32 ++++++++++++++++++++++++++++++++ boards.cfg | 2 +- include/configs/sunxi-common.h | 17 +++++++++++++++++ include/netdev.h | 1 + 6 files changed, 75 insertions(+), 1 deletion(-) create mode 100644 board/sunxi/gmac.c diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index b5c0cb7..49c9448 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -11,6 +11,8 @@ */ #include +#include +#include #include #ifdef CONFIG_SPL_BUILD #include @@ -86,3 +88,24 @@ void enable_caches(void) dcache_enable(); } #endif + +#ifdef CONFIG_CMD_NET +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ +int cpu_eth_init(bd_t *bis) +{ + int rc; + +#ifdef CONFIG_SUNXI_GMAC + rc = sunxi_gmac_initialize(bis); + if (rc < 0) { + printf("sunxi: failed to initialize gmac\n"); + return rc; + } +#endif + + return 0; +} +#endif diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile index 18b1e11..cbf8f08 100644 --- a/board/sunxi/Makefile +++ b/board/sunxi/Makefile @@ -9,4 +9,5 @@ # SPDX-License-Identifier: GPL-2.0+ # obj-y += board.o +obj-$(CONFIG_SUNXI_GMAC) += gmac.o obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c new file mode 100644 index 0000000..e48328d --- /dev/null +++ b/board/sunxi/gmac.c @@ -0,0 +1,32 @@ +#include +#include +#include +#include +#include +#include +#include + +int sunxi_gmac_initialize(bd_t *bis) +{ + int pin; + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Set up clock gating */ + setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC); + + /* Set MII clock */ + setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | + CCM_GMAC_CTRL_GPIT_RGMII); + + /* Configure pin mux settings for GMAC */ + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { + /* skip unused pins in RGMII mode */ + if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14)) + continue; + sunxi_gpio_set_cfgpin(pin, SUN7I_GPA0_GMAC); + sunxi_gpio_set_drv(pin, 3); + } + + return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII); +} diff --git a/boards.cfg b/boards.cfg index db3a6ae..bc05030 100644 --- a/boards.cfg +++ b/boards.cfg @@ -379,7 +379,7 @@ Active arm armv7 rmobile renesas lager Active arm armv7 s5pc1xx samsung goni s5p_goni - Przemyslaw Marczak Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - -Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL - +Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII - Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 3f7e314..e844110 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -127,6 +127,23 @@ #define CONFIG_CONS_INDEX 1 /* UART0 */ +#ifdef CONFIG_SUNXI_GMAC +#define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */ +#define CONFIG_DW_AUTONEG +#define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ +#define CONFIG_PHY_ADDR 1 +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_PHYLIB +#endif + +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_DNS +#define CONFIG_NETCONSOLE +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#endif + #if !defined CONFIG_ENV_IS_IN_MMC && \ !defined CONFIG_ENV_IS_IN_NAND && \ !defined CONFIG_ENV_IS_IN_FAT && \ diff --git a/include/netdev.h b/include/netdev.h index e211f18..63481ec 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -78,6 +78,7 @@ int sh_eth_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int smc91111_initialize(u8 dev_num, int base_addr); int smc911x_initialize(u8 dev_num, int base_addr); +int sunxi_gmac_initialize(bd_t *bis); int sunxi_wemac_initialize(bd_t *bis); int tsi108_eth_initialize(bd_t *bis); int uec_standard_init(bd_t *bis); -- cgit v1.1 From e24ea55c04a8ee9c273dd879edda23bbde3d807a Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 5 May 2014 14:42:31 +0100 Subject: sunxi: mmc support On Mon, 2014-05-05 at 14:18 +0200, Stefan Roese wrote: > > + case 1: > > +#if CONFIG_MMC1_PG > Are you sure that this is correct and shouldn't be: > > +#ifdef CONFIG_MMC1_PG > > ? It's "correct" in so far as it works (the boards.cfg config stuff #defines things to 1), but I think you are right that it isn't the preferred style. But... > A quick scan through this patch series shows that this define > is not set at all. Perhaps its outdated? Or is it used to support > some other sunxi SoC? Not sure, perhaps it should be removed for > now. ...I had thought that it was to support some other board which wasn't being upstreamed right now, so eventually useful and harmless for now, but I've just checked and it isn't actually used by any of the boards in u-boot-sunxi.git. So rather than fix it to use #ifdef lets drop it. Rather than resend the entire series, here is v5.1 of this patch. > Other than this please add my: > > Reviewed-by: Stefan Roese Thanks! 8<--------------------------------- >From 20704e35a41664de5f516ed0e02981ac06085102 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 7 Mar 2014 04:29:39 +0000 Subject: [PATCH v5.1 7/8] sunxi: mmc support This adds support for the MMC controller on the Allwinner A20 (sun7i) processor. Signed-off-by: Henrik Nordstrom Signed-off-by: Luke Leighton Signed-off-by: Oliver Schinagl Signed-off-by: Wills Wang Signed-off-by: Ian Campbell Reviewed-by: Marek Vasut Reviewed-by: Stefan Roese Cc: Tom Cubie Cc: Aaron Maoye Cc: Pantelis Antoniou Reviewed-by: Tom Rini --- arch/arm/include/asm/arch-sunxi/mmc.h | 124 +++++++++ board/sunxi/board.c | 63 +++++ drivers/mmc/Makefile | 1 + drivers/mmc/sunxi_mmc.c | 503 ++++++++++++++++++++++++++++++++++ include/configs/sunxi-common.h | 11 + 5 files changed, 702 insertions(+) create mode 100644 arch/arm/include/asm/arch-sunxi/mmc.h create mode 100644 drivers/mmc/sunxi_mmc.c diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h new file mode 100644 index 0000000..53196e3 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Aaron + * + * MMC register definition for allwinner sunxi platform. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_MMC_H +#define _SUNXI_MMC_H + +#include + +struct sunxi_mmc { + u32 gctrl; /* 0x00 global control */ + u32 clkcr; /* 0x04 clock control */ + u32 timeout; /* 0x08 time out */ + u32 width; /* 0x0c bus width */ + u32 blksz; /* 0x10 block size */ + u32 bytecnt; /* 0x14 byte count */ + u32 cmd; /* 0x18 command */ + u32 arg; /* 0x1c argument */ + u32 resp0; /* 0x20 response 0 */ + u32 resp1; /* 0x24 response 1 */ + u32 resp2; /* 0x28 response 2 */ + u32 resp3; /* 0x2c response 3 */ + u32 imask; /* 0x30 interrupt mask */ + u32 mint; /* 0x34 masked interrupt status */ + u32 rint; /* 0x38 raw interrupt status */ + u32 status; /* 0x3c status */ + u32 ftrglevel; /* 0x40 FIFO threshold watermark*/ + u32 funcsel; /* 0x44 function select */ + u32 cbcr; /* 0x48 CIU byte count */ + u32 bbcr; /* 0x4c BIU byte count */ + u32 dbgc; /* 0x50 debug enable */ + u32 res0[11]; + u32 dmac; /* 0x80 internal DMA control */ + u32 dlba; /* 0x84 internal DMA descr list base address */ + u32 idst; /* 0x88 internal DMA status */ + u32 idie; /* 0x8c internal DMA interrupt enable */ + u32 chda; /* 0x90 */ + u32 cbda; /* 0x94 */ + u32 res1[26]; + u32 fifo; /* 0x100 FIFO access address */ +}; + +#define SUNXI_MMC_CLK_POWERSAVE (0x1 << 17) +#define SUNXI_MMC_CLK_ENABLE (0x1 << 16) +#define SUNXI_MMC_CLK_DIVIDER_MASK (0xff) + +#define SUNXI_MMC_GCTRL_SOFT_RESET (0x1 << 0) +#define SUNXI_MMC_GCTRL_FIFO_RESET (0x1 << 1) +#define SUNXI_MMC_GCTRL_DMA_RESET (0x1 << 2) +#define SUNXI_MMC_GCTRL_RESET (SUNXI_MMC_GCTRL_SOFT_RESET|\ + SUNXI_MMC_GCTRL_FIFO_RESET|\ + SUNXI_MMC_GCTRL_DMA_RESET) +#define SUNXI_MMC_GCTRL_DMA_ENABLE (0x1 << 5) +#define SUNXI_MMC_GCTRL_ACCESS_BY_AHB (0x1 << 31) + +#define SUNXI_MMC_CMD_RESP_EXPIRE (0x1 << 6) +#define SUNXI_MMC_CMD_LONG_RESPONSE (0x1 << 7) +#define SUNXI_MMC_CMD_CHK_RESPONSE_CRC (0x1 << 8) +#define SUNXI_MMC_CMD_DATA_EXPIRE (0x1 << 9) +#define SUNXI_MMC_CMD_WRITE (0x1 << 10) +#define SUNXI_MMC_CMD_AUTO_STOP (0x1 << 12) +#define SUNXI_MMC_CMD_WAIT_PRE_OVER (0x1 << 13) +#define SUNXI_MMC_CMD_SEND_INIT_SEQ (0x1 << 15) +#define SUNXI_MMC_CMD_UPCLK_ONLY (0x1 << 21) +#define SUNXI_MMC_CMD_START (0x1 << 31) + +#define SUNXI_MMC_RINT_RESP_ERROR (0x1 << 1) +#define SUNXI_MMC_RINT_COMMAND_DONE (0x1 << 2) +#define SUNXI_MMC_RINT_DATA_OVER (0x1 << 3) +#define SUNXI_MMC_RINT_TX_DATA_REQUEST (0x1 << 4) +#define SUNXI_MMC_RINT_RX_DATA_REQUEST (0x1 << 5) +#define SUNXI_MMC_RINT_RESP_CRC_ERROR (0x1 << 6) +#define SUNXI_MMC_RINT_DATA_CRC_ERROR (0x1 << 7) +#define SUNXI_MMC_RINT_RESP_TIMEOUT (0x1 << 8) +#define SUNXI_MMC_RINT_DATA_TIMEOUT (0x1 << 9) +#define SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE (0x1 << 10) +#define SUNXI_MMC_RINT_FIFO_RUN_ERROR (0x1 << 11) +#define SUNXI_MMC_RINT_HARD_WARE_LOCKED (0x1 << 12) +#define SUNXI_MMC_RINT_START_BIT_ERROR (0x1 << 13) +#define SUNXI_MMC_RINT_AUTO_COMMAND_DONE (0x1 << 14) +#define SUNXI_MMC_RINT_END_BIT_ERROR (0x1 << 15) +#define SUNXI_MMC_RINT_SDIO_INTERRUPT (0x1 << 16) +#define SUNXI_MMC_RINT_CARD_INSERT (0x1 << 30) +#define SUNXI_MMC_RINT_CARD_REMOVE (0x1 << 31) +#define SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT \ + (SUNXI_MMC_RINT_RESP_ERROR | \ + SUNXI_MMC_RINT_RESP_CRC_ERROR | \ + SUNXI_MMC_RINT_DATA_CRC_ERROR | \ + SUNXI_MMC_RINT_RESP_TIMEOUT | \ + SUNXI_MMC_RINT_DATA_TIMEOUT | \ + SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE | \ + SUNXI_MMC_RINT_FIFO_RUN_ERROR | \ + SUNXI_MMC_RINT_HARD_WARE_LOCKED | \ + SUNXI_MMC_RINT_START_BIT_ERROR | \ + SUNXI_MMC_RINT_END_BIT_ERROR) /* 0xbfc2 */ +#define SUNXI_MMC_RINT_INTERRUPT_DONE_BIT \ + (SUNXI_MMC_RINT_AUTO_COMMAND_DONE | \ + SUNXI_MMC_RINT_DATA_OVER | \ + SUNXI_MMC_RINT_COMMAND_DONE | \ + SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE) + +#define SUNXI_MMC_STATUS_RXWL_FLAG (0x1 << 0) +#define SUNXI_MMC_STATUS_TXWL_FLAG (0x1 << 1) +#define SUNXI_MMC_STATUS_FIFO_EMPTY (0x1 << 2) +#define SUNXI_MMC_STATUS_FIFO_FULL (0x1 << 3) +#define SUNXI_MMC_STATUS_CARD_PRESENT (0x1 << 8) +#define SUNXI_MMC_STATUS_CARD_DATA_BUSY (0x1 << 9) +#define SUNXI_MMC_STATUS_DATA_FSM_BUSY (0x1 << 10) + +#define SUNXI_MMC_IDMAC_RESET (0x1 << 0) +#define SUNXI_MMC_IDMAC_FIXBURST (0x1 << 1) +#define SUNXI_MMC_IDMAC_ENABLE (0x1 << 7) + +#define SUNXI_MMC_IDIE_TXIRQ (0x1 << 0) +#define SUNXI_MMC_IDIE_RXIRQ (0x1 << 1) + +int sunxi_mmc_init(int sdc_no); +#endif /* _SUNXI_MMC_H */ diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 328334a..b05d0b9 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -43,6 +45,67 @@ int dram_init(void) return 0; } +#ifdef CONFIG_GENERIC_MMC +static void mmc_pinmux_setup(int sdc) +{ + unsigned int pin; + + switch (sdc) { + case 0: + /* D1-PF0, D0-PF1, CLK-PF2, CMD-PF3, D3-PF4, D4-PF5 */ + for (pin = SUNXI_GPF(0); pin <= SUNXI_GPF(5); pin++) { + sunxi_gpio_set_cfgpin(pin, SUNXI_GPF0_SDC0); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + case 1: + /* CMD-PH22, CLK-PH23, D0~D3-PH24~27 : 5 */ + for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) { + sunxi_gpio_set_cfgpin(pin, SUN4I_GPH22_SDC1); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + case 2: + /* CMD-PC6, CLK-PC7, D0-PC8, D1-PC9, D2-PC10, D3-PC11 */ + for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(11); pin++) { + sunxi_gpio_set_cfgpin(pin, SUNXI_GPC6_SDC2); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + case 3: + /* CMD-PI4, CLK-PI5, D0~D3-PI6~9 : 2 */ + for (pin = SUNXI_GPI(4); pin <= SUNXI_GPI(9); pin++) { + sunxi_gpio_set_cfgpin(pin, SUN4I_GPI4_SDC3); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + default: + printf("sunxi: invalid MMC slot %d for pinmux setup\n", sdc); + break; + } +} + +int board_mmc_init(bd_t *bis) +{ + mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT); + sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT); +#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA) + mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA); + sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA); +#endif + + return 0; +} +#endif + #ifdef CONFIG_SPL_BUILD void sunxi_board_init(void) { diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 4c6ab9e..34febf5 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o obj-$(CONFIG_DWMMC) += dw_mmc.o obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o +obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c new file mode 100644 index 0000000..eb7b115 --- /dev/null +++ b/drivers/mmc/sunxi_mmc.c @@ -0,0 +1,503 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Aaron + * + * MMC driver for allwinner sunxi platform. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +struct sunxi_mmc_des { + u32 reserved1_1:1; + u32 dic:1; /* disable interrupt on completion */ + u32 last_des:1; /* 1-this data buffer is the last buffer */ + u32 first_des:1; /* 1-data buffer is the first buffer, + 0-data buffer contained in the next + descriptor is 1st buffer */ + u32 des_chain:1; /* 1-the 2nd address in the descriptor is the + next descriptor address */ + u32 end_of_ring:1; /* 1-last descriptor flag when using dual + data buffer in descriptor */ + u32 reserved1_2:24; + u32 card_err_sum:1; /* transfer error flag */ + u32 own:1; /* des owner:1-idma owns it, 0-host owns it */ +#define SDXC_DES_NUM_SHIFT 16 +#define SDXC_DES_BUFFER_MAX_LEN (1 << SDXC_DES_NUM_SHIFT) + u32 data_buf1_sz:16; + u32 data_buf2_sz:16; + u32 buf_addr_ptr1; + u32 buf_addr_ptr2; +}; + +struct sunxi_mmc_host { + unsigned mmc_no; + uint32_t *mclkreg; + unsigned database; + unsigned fatal_err; + unsigned mod_clk; + struct sunxi_mmc *reg; + struct mmc_config cfg; +}; + +/* support 4 mmc hosts */ +struct sunxi_mmc_host mmc_host[4]; + +static int mmc_resource_init(int sdc_no) +{ + struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no]; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + debug("init mmc %d resource\n", sdc_no); + + switch (sdc_no) { + case 0: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE; + mmchost->mclkreg = &ccm->sd0_clk_cfg; + break; + case 1: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE; + mmchost->mclkreg = &ccm->sd1_clk_cfg; + break; + case 2: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE; + mmchost->mclkreg = &ccm->sd2_clk_cfg; + break; + case 3: + mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE; + mmchost->mclkreg = &ccm->sd3_clk_cfg; + break; + default: + printf("Wrong mmc number %d\n", sdc_no); + return -1; + } + mmchost->database = (unsigned int)mmchost->reg + 0x100; + mmchost->mmc_no = sdc_no; + + return 0; +} + +static int mmc_clk_io_on(int sdc_no) +{ + unsigned int pll_clk; + unsigned int divider; + struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no]; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + debug("init mmc %d clock and io\n", sdc_no); + + /* config ahb clock */ + setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no)); + + /* config mod clock */ + pll_clk = clock_get_pll6(); + /* should be close to 100 MHz but no more, so round up */ + divider = ((pll_clk + 99999999) / 100000000) - 1; + writel(CCM_MMC_CTRL_ENABLE | CCM_MMC_CTRL_PLL6 | divider, + mmchost->mclkreg); + mmchost->mod_clk = pll_clk / (divider + 1); + + return 0; +} + +static int mmc_update_clk(struct mmc *mmc) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned int cmd; + unsigned timeout_msecs = 2000; + + cmd = SUNXI_MMC_CMD_START | + SUNXI_MMC_CMD_UPCLK_ONLY | + SUNXI_MMC_CMD_WAIT_PRE_OVER; + writel(cmd, &mmchost->reg->cmd); + while (readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) { + if (!timeout_msecs--) + return -1; + udelay(1000); + } + + /* clock update sets various irq status bits, clear these */ + writel(readl(&mmchost->reg->rint), &mmchost->reg->rint); + + return 0; +} + +static int mmc_config_clock(struct mmc *mmc, unsigned div) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned rval = readl(&mmchost->reg->clkcr); + + /* Disable Clock */ + rval &= ~SUNXI_MMC_CLK_ENABLE; + writel(rval, &mmchost->reg->clkcr); + if (mmc_update_clk(mmc)) + return -1; + + /* Change Divider Factor */ + rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK; + rval |= div; + writel(rval, &mmchost->reg->clkcr); + if (mmc_update_clk(mmc)) + return -1; + /* Re-enable Clock */ + rval |= SUNXI_MMC_CLK_ENABLE; + writel(rval, &mmchost->reg->clkcr); + + if (mmc_update_clk(mmc)) + return -1; + + return 0; +} + +static void mmc_set_ios(struct mmc *mmc) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned int clkdiv = 0; + + debug("set ios: bus_width: %x, clock: %d, mod_clk: %d\n", + mmc->bus_width, mmc->clock, mmchost->mod_clk); + + /* Change clock first */ + clkdiv = (mmchost->mod_clk + (mmc->clock >> 1)) / mmc->clock / 2; + if (mmc->clock) { + if (mmc_config_clock(mmc, clkdiv)) { + mmchost->fatal_err = 1; + return; + } + } + + /* Change bus width */ + if (mmc->bus_width == 8) + writel(0x2, &mmchost->reg->width); + else if (mmc->bus_width == 4) + writel(0x1, &mmchost->reg->width); + else + writel(0x0, &mmchost->reg->width); +} + +static int mmc_core_init(struct mmc *mmc) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + + /* Reset controller */ + writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl); + + return 0; +} + +static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + const int reading = !!(data->flags & MMC_DATA_READ); + const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY : + SUNXI_MMC_STATUS_FIFO_FULL; + unsigned i; + unsigned byte_cnt = data->blocksize * data->blocks; + unsigned timeout_msecs = 2000; + unsigned *buff = (unsigned int *)(reading ? data->dest : data->src); + + for (i = 0; i < (byte_cnt >> 2); i++) { + while (readl(&mmchost->reg->status) & status_bit) { + if (!timeout_msecs--) + return -1; + udelay(1000); + } + + if (reading) + buff[i] = readl(mmchost->database); + else + writel(buff[i], mmchost->database); + } + + return 0; +} + +static int mmc_trans_data_by_dma(struct mmc *mmc, struct mmc_data *data) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned byte_cnt = data->blocksize * data->blocks; + unsigned char *buff; + unsigned des_idx = 0; + unsigned buff_frag_num = + (byte_cnt + SDXC_DES_BUFFER_MAX_LEN - 1) >> SDXC_DES_NUM_SHIFT; + unsigned remain; + unsigned i, rval; + ALLOC_CACHE_ALIGN_BUFFER(struct sunxi_mmc_des, pdes, buff_frag_num); + + buff = data->flags & MMC_DATA_READ ? + (unsigned char *)data->dest : (unsigned char *)data->src; + remain = byte_cnt & (SDXC_DES_BUFFER_MAX_LEN - 1); + + flush_cache((unsigned long)buff, (unsigned long)byte_cnt); + for (i = 0; i < buff_frag_num; i++, des_idx++) { + memset((void *)&pdes[des_idx], 0, sizeof(struct sunxi_mmc_des)); + pdes[des_idx].des_chain = 1; + pdes[des_idx].own = 1; + pdes[des_idx].dic = 1; + if (buff_frag_num > 1 && i != buff_frag_num - 1) + pdes[des_idx].data_buf1_sz = 0; /* 0 == max_len */ + else + pdes[des_idx].data_buf1_sz = remain; + + pdes[des_idx].buf_addr_ptr1 = + (u32) buff + i * SDXC_DES_BUFFER_MAX_LEN; + if (i == 0) + pdes[des_idx].first_des = 1; + + if (i == buff_frag_num - 1) { + pdes[des_idx].dic = 0; + pdes[des_idx].last_des = 1; + pdes[des_idx].end_of_ring = 1; + pdes[des_idx].buf_addr_ptr2 = 0; + } else { + pdes[des_idx].buf_addr_ptr2 = (u32)&pdes[des_idx + 1]; + } + } + flush_cache((unsigned long)pdes, + sizeof(struct sunxi_mmc_des) * (des_idx + 1)); + + rval = readl(&mmchost->reg->gctrl); + /* Enable DMA */ + writel(rval | SUNXI_MMC_GCTRL_DMA_RESET | SUNXI_MMC_GCTRL_DMA_ENABLE, + &mmchost->reg->gctrl); + /* Reset iDMA */ + writel(SUNXI_MMC_IDMAC_RESET, &mmchost->reg->dmac); + /* Enable iDMA */ + writel(SUNXI_MMC_IDMAC_FIXBURST | SUNXI_MMC_IDMAC_ENABLE, + &mmchost->reg->dmac); + rval = readl(&mmchost->reg->idie) & + ~(SUNXI_MMC_IDIE_TXIRQ|SUNXI_MMC_IDIE_RXIRQ); + if (data->flags & MMC_DATA_WRITE) + rval |= SUNXI_MMC_IDIE_TXIRQ; + else + rval |= SUNXI_MMC_IDIE_RXIRQ; + writel(rval, &mmchost->reg->idie); + writel((u32) pdes, &mmchost->reg->dlba); + writel((0x2 << 28) | (0x7 << 16) | (0x01 << 3), + &mmchost->reg->ftrglevel); + + return 0; +} + +static void mmc_enable_dma_accesses(struct mmc *mmc, int dma) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + + unsigned int gctrl = readl(&mmchost->reg->gctrl); + if (dma) + gctrl &= ~SUNXI_MMC_GCTRL_ACCESS_BY_AHB; + else + gctrl |= SUNXI_MMC_GCTRL_ACCESS_BY_AHB; + writel(gctrl, &mmchost->reg->gctrl); +} + +static int mmc_rint_wait(struct mmc *mmc, unsigned int timeout_msecs, + unsigned int done_bit, const char *what) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned int status; + + do { + status = readl(&mmchost->reg->rint); + if (!timeout_msecs-- || + (status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) { + debug("%s timeout %x\n", what, + status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT); + return TIMEOUT; + } + udelay(1000); + } while (!(status & done_bit)); + + return 0; +} + +static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + unsigned int cmdval = SUNXI_MMC_CMD_START; + unsigned int timeout_msecs; + int error = 0; + unsigned int status = 0; + unsigned int usedma = 0; + unsigned int bytecnt = 0; + + if (mmchost->fatal_err) + return -1; + if (cmd->resp_type & MMC_RSP_BUSY) + debug("mmc cmd %d check rsp busy\n", cmd->cmdidx); + if (cmd->cmdidx == 12) + return 0; + + if (!cmd->cmdidx) + cmdval |= SUNXI_MMC_CMD_SEND_INIT_SEQ; + if (cmd->resp_type & MMC_RSP_PRESENT) + cmdval |= SUNXI_MMC_CMD_RESP_EXPIRE; + if (cmd->resp_type & MMC_RSP_136) + cmdval |= SUNXI_MMC_CMD_LONG_RESPONSE; + if (cmd->resp_type & MMC_RSP_CRC) + cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC; + + if (data) { + if ((u32) data->dest & 0x3) { + error = -1; + goto out; + } + + cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER; + if (data->flags & MMC_DATA_WRITE) + cmdval |= SUNXI_MMC_CMD_WRITE; + if (data->blocks > 1) + cmdval |= SUNXI_MMC_CMD_AUTO_STOP; + writel(data->blocksize, &mmchost->reg->blksz); + writel(data->blocks * data->blocksize, &mmchost->reg->bytecnt); + } + + debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", mmchost->mmc_no, + cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg); + writel(cmd->cmdarg, &mmchost->reg->arg); + + if (!data) + writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd); + + /* + * transfer data and check status + * STATREG[2] : FIFO empty + * STATREG[3] : FIFO full + */ + if (data) { + int ret = 0; + + bytecnt = data->blocksize * data->blocks; + debug("trans data %d bytes\n", bytecnt); +#if defined(CONFIG_MMC_SUNXI_USE_DMA) && !defined(CONFIG_SPL_BUILD) + if (bytecnt > 64) { +#else + if (0) { +#endif + usedma = 1; + mmc_enable_dma_accesses(mmc, 1); + ret = mmc_trans_data_by_dma(mmc, data); + writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd); + } else { + mmc_enable_dma_accesses(mmc, 0); + writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd); + ret = mmc_trans_data_by_cpu(mmc, data); + } + if (ret) { + error = readl(&mmchost->reg->rint) & \ + SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT; + error = TIMEOUT; + goto out; + } + } + + error = mmc_rint_wait(mmc, 0xfffff, SUNXI_MMC_RINT_COMMAND_DONE, "cmd"); + if (error) + goto out; + + if (data) { + timeout_msecs = usedma ? 120 * bytecnt : 120; + debug("cacl timeout %x msec\n", timeout_msecs); + error = mmc_rint_wait(mmc, timeout_msecs, + data->blocks > 1 ? + SUNXI_MMC_RINT_AUTO_COMMAND_DONE : + SUNXI_MMC_RINT_DATA_OVER, + "data"); + if (error) + goto out; + } + + if (cmd->resp_type & MMC_RSP_BUSY) { + timeout_msecs = 2000; + do { + status = readl(&mmchost->reg->status); + if (!timeout_msecs--) { + debug("busy timeout\n"); + error = TIMEOUT; + goto out; + } + udelay(1000); + } while (status & SUNXI_MMC_STATUS_CARD_DATA_BUSY); + } + + if (cmd->resp_type & MMC_RSP_136) { + cmd->response[0] = readl(&mmchost->reg->resp3); + cmd->response[1] = readl(&mmchost->reg->resp2); + cmd->response[2] = readl(&mmchost->reg->resp1); + cmd->response[3] = readl(&mmchost->reg->resp0); + debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n", + cmd->response[3], cmd->response[2], + cmd->response[1], cmd->response[0]); + } else { + cmd->response[0] = readl(&mmchost->reg->resp0); + debug("mmc resp 0x%08x\n", cmd->response[0]); + } +out: + if (data && usedma) { + /* IDMASTAREG + * IDST[0] : idma tx int + * IDST[1] : idma rx int + * IDST[2] : idma fatal bus error + * IDST[4] : idma descriptor invalid + * IDST[5] : idma error summary + * IDST[8] : idma normal interrupt sumary + * IDST[9] : idma abnormal interrupt sumary + */ + status = readl(&mmchost->reg->idst); + writel(status, &mmchost->reg->idst); + writel(0, &mmchost->reg->idie); + writel(0, &mmchost->reg->dmac); + writel(readl(&mmchost->reg->gctrl) & ~SUNXI_MMC_GCTRL_DMA_ENABLE, + &mmchost->reg->gctrl); + } + if (error < 0) { + writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl); + mmc_update_clk(mmc); + } + writel(0xffffffff, &mmchost->reg->rint); + writel(readl(&mmchost->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET, + &mmchost->reg->gctrl); + + return error; +} + +static const struct mmc_ops sunxi_mmc_ops = { + .send_cmd = mmc_send_cmd, + .set_ios = mmc_set_ios, + .init = mmc_core_init, +}; + +int sunxi_mmc_init(int sdc_no) +{ + struct mmc_config *cfg = &mmc_host[sdc_no].cfg; + + memset(&mmc_host[sdc_no], 0, sizeof(struct sunxi_mmc_host)); + + cfg->name = "SUNXI SD/MMC"; + cfg->ops = &sunxi_mmc_ops; + + cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + cfg->host_caps = MMC_MODE_4BIT; + cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; + cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; + + cfg->f_min = 400000; + cfg->f_max = 52000000; + + mmc_resource_init(sdc_no); + mmc_clk_io_on(sdc_no); + + if (mmc_create(cfg, &mmc_host[sdc_no]) == NULL) + return -1; + + return 0; +} diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index e844110..4253452 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -59,6 +59,16 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG +/* mmc config */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_MMC +#define CONFIG_MMC_SUNXI +#define CONFIG_MMC_SUNXI_SLOT 0 +#define CONFIG_MMC_SUNXI_USE_DMA +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ + /* 4MB of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) @@ -94,6 +104,7 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) /* 512 KiB */ #define CONFIG_IDENT_STRING " Allwinner Technology" +#define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_EXTRA_ENV_SETTINGS \ -- cgit v1.1 From 50827a5991bb345319bd0ce76f5e2402fac0c391 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 5 May 2014 11:52:30 +0100 Subject: sunxi: non-FEL SPL boot support for sun7i MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for booting from an MMC card. Signed-off-by: Stefan Roese Signed-off-by: Henrik Nordström Signed-off-by: Ian Campbell Reviewed-by: Marek Vasut Cc: Tom Cubie Reviewed-by: Tom Rini --- Makefile | 10 +++ arch/arm/cpu/armv7/sunxi/config.mk | 8 ++ arch/arm/cpu/armv7/sunxi/u-boot-spl.lds | 52 ++++++++++++ boards.cfg | 1 + include/configs/sunxi-common.h | 26 ++++++ spl/Makefile | 13 +++ tools/.gitignore | 1 + tools/Makefile | 2 + tools/mksunxiboot.c | 142 ++++++++++++++++++++++++++++++++ 9 files changed, 255 insertions(+) create mode 100644 arch/arm/cpu/armv7/sunxi/config.mk create mode 100644 arch/arm/cpu/armv7/sunxi/u-boot-spl.lds create mode 100644 tools/mksunxiboot.c diff --git a/Makefile b/Makefile index 928a880..966fd14 100644 --- a/Makefile +++ b/Makefile @@ -937,6 +937,13 @@ OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE $(call if_changed,pad_cat) +ifneq ($(CONFIG_SUNXI),) +OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ + --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff +u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE + $(call if_changed,pad_cat) +endif + ifneq ($(CONFIG_TEGRA),) OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE @@ -1163,6 +1170,9 @@ spl/u-boot-spl.bin: spl/u-boot-spl spl/u-boot-spl: tools prepare $(Q)$(MAKE) obj=spl -f $(srctree)/spl/Makefile all +spl/sunxi-spl.bin: spl/u-boot-spl + @: + tpl/u-boot-tpl.bin: tools prepare $(Q)$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y diff --git a/arch/arm/cpu/armv7/sunxi/config.mk b/arch/arm/cpu/armv7/sunxi/config.mk new file mode 100644 index 0000000..00f5ffc --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/config.mk @@ -0,0 +1,8 @@ +# Build a combined spl + u-boot image +ifdef CONFIG_SPL +ifndef CONFIG_SPL_BUILD +ifndef CONFIG_SPL_FEL +ALL-y += u-boot-sunxi-with-spl.bin +endif +endif +endif diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds new file mode 100644 index 0000000..5008028 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2012 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * Based on omap-common/u-boot-spl.lds: + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * (C) Copyright 2010 + * Texas Instruments, + * Aneesh V + * + * SPDX-License-Identifier: GPL-2.0+ + */ +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + arch/arm/cpu/armv7/start.o (.text) + *(.text*) + } > .sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } > .sdram +} diff --git a/boards.cfg b/boards.cfg index bc05030..8b1177c 100644 --- a/boards.cfg +++ b/boards.cfg @@ -379,6 +379,7 @@ Active arm armv7 rmobile renesas lager Active arm armv7 s5pc1xx samsung goni s5p_goni - Przemyslaw Marczak Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - +Active arm armv7 sunxi - sunxi Cubietruck sun7i:CUBIETRUCK,SPL,SUNXI_GMAC,RGMII - Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII - Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier Active arm armv7 u8500 st-ericsson u8500 u8500_href - - diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 4253452..5d72d62 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -17,6 +17,11 @@ * High Level Configuration Options */ #define CONFIG_SUNXI /* sunxi family */ +#ifdef CONFIG_SPL_BUILD +#ifndef CONFIG_SPL_FEL +#define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ +#endif +#endif #include /* get chip and board defs */ @@ -121,11 +126,32 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT +#ifdef CONFIG_SPL_FEL + #define CONFIG_SPL #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds" #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi" #define CONFIG_SPL_TEXT_BASE 0x2000 #define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */ + +#else /* CONFIG_SPL */ + +#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KiB */ + +#define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */ + +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT + +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */ +#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ + +#endif /* CONFIG_SPL */ + /* end of 32 KiB in sram */ #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK diff --git a/spl/Makefile b/spl/Makefile index 55500fd..bfb7c8a 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -189,6 +189,12 @@ ifdef CONFIG_SAMSUNG ALL-y += $(obj)/$(BOARD)-spl.bin endif +ifdef CONFIG_SUNXI +ifndef CONFIG_SPL_FEL +ALL-y += $(obj)/sunxi-spl.bin +endif +endif + all: $(ALL-y) ifdef CONFIG_SAMSUNG @@ -216,6 +222,13 @@ ifneq ($(CONFIG_SPL_TEXT_BASE),) LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE) endif +ifdef CONFIG_SUNXI +quiet_cmd_mksunxiboot = MKSUNXI $@ +cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@ +$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin + $(call if_changed,mksunxiboot) +endif + quiet_cmd_u-boot-spl = LD $@ cmd_u-boot-spl = cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \ diff --git a/tools/.gitignore b/tools/.gitignore index b1e997f..725db90 100644 --- a/tools/.gitignore +++ b/tools/.gitignore @@ -11,6 +11,7 @@ /mkexynosspl /mpc86x_clk /mxsboot +/mksunxiboot /ncb /proftool /relocate-rela diff --git a/tools/Makefile b/tools/Makefile index 6e43a01..b645224 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -131,6 +131,8 @@ hostprogs-$(CONFIG_MX23) += mxsboot$(SFX) hostprogs-$(CONFIG_MX28) += mxsboot$(SFX) HOSTCFLAGS_mxsboot$(SFX).o := -pedantic +hostprogs-$(CONFIG_SUNXI) += mksunxiboot$(SFX) + hostprogs-$(CONFIG_NETCONSOLE) += ncb$(SFX) hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX) diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c new file mode 100644 index 0000000..da7c9f0 --- /dev/null +++ b/tools/mksunxiboot.c @@ -0,0 +1,142 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. + * Tom Cubie + * + * a simple tool to generate bootable image for sunxi platform. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* boot head definition from sun4i boot code */ +struct boot_file_head { + uint32_t b_instruction; /* one intruction jumping to real code */ + uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */ + uint32_t check_sum; /* generated by PC */ + uint32_t length; /* generated by PC */ + /* + * We use a simplified header, only filling in what is needed + * by the boot ROM. To be compatible with Allwinner tools we + * would need to implement the proper fields here instead of + * padding. + */ + uint8_t pad[12]; /* align to 32 bytes */ +}; + +#define BOOT0_MAGIC "eGON.BT0" +#define STAMP_VALUE 0x5F0A6C39 + +/* check sum functon from sun4i boot code */ +int gen_check_sum(struct boot_file_head *head_p) +{ + uint32_t length; + uint32_t *buf; + uint32_t loop; + uint32_t i; + uint32_t sum; + + length = head_p->length; + if ((length & 0x3) != 0) /* must 4-byte-aligned */ + return -1; + buf = (uint32_t *)head_p; + head_p->check_sum = STAMP_VALUE; /* fill stamp */ + loop = length >> 2; + + /* calculate the sum */ + for (i = 0, sum = 0; i < loop; i++) + sum += buf[i]; + + /* write back check sum */ + head_p->check_sum = sum; + + return 0; +} + +#define ALIGN(x, a) __ALIGN_MASK((x), (typeof(x))(a)-1) +#define __ALIGN_MASK(x, mask) (((x)+(mask))&~(mask)) + +#define SUN4I_SRAM_SIZE 0x7600 /* 0x7748+ is used by BROM */ +#define SRAM_LOAD_MAX_SIZE (SUN4I_SRAM_SIZE - sizeof(struct boot_file_head)) +#define BLOCK_SIZE 512 + +struct boot_img { + struct boot_file_head header; + char code[SRAM_LOAD_MAX_SIZE]; + char pad[BLOCK_SIZE]; +}; + +int main(int argc, char *argv[]) +{ + int fd_in, fd_out; + struct boot_img img; + unsigned file_size, load_size; + int count; + + if (argc < 2) { + printf("\tThis program makes an input bin file to sun4i " \ + "bootable image.\n" \ + "\tUsage: %s input_file out_putfile\n", argv[0]); + return EXIT_FAILURE; + } + + fd_in = open(argv[1], O_RDONLY); + if (fd_in < 0) { + perror("Open input file"); + return EXIT_FAILURE; + } + + memset(img.pad, 0, BLOCK_SIZE); + + /* get input file size */ + file_size = lseek(fd_in, 0, SEEK_END); + + if (file_size > SRAM_LOAD_MAX_SIZE) { + fprintf(stderr, "ERROR: File too large!\n"); + return EXIT_FAILURE; + } else { + load_size = ALIGN(file_size, sizeof(int)); + } + + fd_out = open(argv[2], O_WRONLY | O_CREAT, 0666); + if (fd_out < 0) { + perror("Open output file"); + return EXIT_FAILURE; + } + + /* read file to buffer to calculate checksum */ + lseek(fd_in, 0, SEEK_SET); + count = read(fd_in, img.code, load_size); + if (count != load_size) { + perror("Reading input image"); + return EXIT_FAILURE; + } + + /* fill the header */ + img.header.b_instruction = /* b instruction */ + 0xEA000000 | /* jump to the first instr after the header */ + ((sizeof(struct boot_file_head) / sizeof(int) - 2) + & 0x00FFFFFF); + memcpy(img.header.magic, BOOT0_MAGIC, 8); /* no '0' termination */ + img.header.length = + ALIGN(load_size + sizeof(struct boot_file_head), BLOCK_SIZE); + gen_check_sum(&img.header); + + count = write(fd_out, &img, img.header.length); + if (count != img.header.length) { + perror("Writing output"); + return EXIT_FAILURE; + } + + close(fd_in); + close(fd_out); + + return EXIT_SUCCESS; +} -- cgit v1.1 From 1c848a258600490f6964597b92b69a107af141d6 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 8 May 2014 22:26:32 +0100 Subject: net/designware: ensure device private data is DMA aligned. struct dw_eth_dev contains fields which are accessed via DMA, so make sure it is aligned to a dma boundary. Without this I see: ERROR: v7_dcache_inval_range - start address is not aligned - 0x7fb677e0 Signed-off-by: Ian Campbell Reviewed-by: Alexey Brodkin Acked-by: Marek Vasut --- drivers/net/designware.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 78751b2..41ab3ac 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -414,7 +414,8 @@ int designware_initialize(ulong base_addr, u32 interface) * Since the priv structure contains the descriptors which need a strict * buswidth alignment, memalign is used to allocate memory */ - priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev)); + priv = (struct dw_eth_dev *) memalign(ARCH_DMA_MINALIGN, + sizeof(struct dw_eth_dev)); if (!priv) { free(dev); return -ENOMEM; -- cgit v1.1 From 964ea7c1cea6228aa414f4aee5acf25bcd87ca21 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 8 May 2014 22:26:33 +0100 Subject: net/designware: ensure cache invalidations are aligned to ARCH_DMA_MINALIGN This is required at least on ARM. When sending instead of simply invalidating the entire descriptor, flush as little as possible while still respecting ARCH_DMA_MINALIGN, as requested by Alexey. Signed-off-by: Ian Campbell Cc: Alexey Brodkin --- drivers/net/designware.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 41ab3ac..fa816bf 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -280,10 +280,18 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length) u32 desc_num = priv->tx_currdescnum; struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num]; - /* Invalidate only "status" field for the following check */ - invalidate_dcache_range((unsigned long)&desc_p->txrx_status, - (unsigned long)&desc_p->txrx_status + - sizeof(desc_p->txrx_status)); + /* + * Strictly we only need to invalidate the "txrx_status" field + * for the following check, but on some platforms we cannot + * invalidate only 4 bytes, so roundup to + * ARCH_DMA_MINALIGN. This is safe because the individual + * descriptors in the array are each aligned to + * ARCH_DMA_MINALIGN. + */ + invalidate_dcache_range( + (unsigned long)desc_p, + (unsigned long)desc_p + + roundup(sizeof(desc_p->txrx_status), ARCH_DMA_MINALIGN)); /* Check if the descriptor is owned by CPU */ if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) { @@ -351,7 +359,7 @@ static int dw_eth_recv(struct eth_device *dev) /* Invalidate received data */ invalidate_dcache_range((unsigned long)desc_p->dmamac_addr, (unsigned long)desc_p->dmamac_addr + - length); + roundup(length, ARCH_DMA_MINALIGN)); NetReceive(desc_p->dmamac_addr, length); -- cgit v1.1 From 1857075a7f00ff0a62b13170a78c70ff94e30f96 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 14 May 2014 19:30:29 +0100 Subject: net/designware: reorder struct dw_eth_dev to pack more efficiently. On Thu, 2014-05-08 at 22:26 +0100, Ian Campbell wrote: > The {r,t}xbuffs fields also need to be aligned. Previously this was done > implicitly because they immediately followed the descriptor tables. Make this > explicit and also move to the head of the struct. Looks like I managed to not actually commit the move of the field to the head of the struct! v3.1 follows.... Ian. 8<------------ >From 2937ba01841887317f6792709ed57cb86b5fc0cd Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 1 May 2014 19:45:15 +0100 Subject: [PATCH] net/designware: reorder struct dw_eth_dev to pack more efficiently. The {tx,rx}_mac_descrtable fields are aligned to ARCH_DMA_MINALIGN, which could be 256 or even larger. That means there is a potentially huge hole in the struct before those fields, so move them to the front where they are better packed. Moving them to the front also helps ensure that so long as dw_eth_dev is properly aligned (which it is since "net/designware: ensure device private data is DMA aligned.") the {tx,rx}_mac_descrtable will be too, or at least avoids having to worry too much about compiler specifics. The {r,t}xbuffs fields also need to be aligned. Previously this was done implicitly because they immediately followed the descriptor tables. Make this explicit and also move to the head of the struct. Signed-off-by: Ian Campbell Cc: Alexey Brodkin Tested-by: Siarhei Siamashka Reviewed-by: Siarhei Siamashka --- drivers/net/designware.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/designware.h b/drivers/net/designware.h index 382b0c7..de2fdcb 100644 --- a/drivers/net/designware.h +++ b/drivers/net/designware.h @@ -215,15 +215,14 @@ struct dmamacdescr { #endif struct dw_eth_dev { - u32 interface; - u32 tx_currdescnum; - u32 rx_currdescnum; - struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM]; struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM]; + char txbuffs[TX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN); + char rxbuffs[RX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN); - char txbuffs[TX_TOTAL_BUFSIZE]; - char rxbuffs[RX_TOTAL_BUFSIZE]; + u32 interface; + u32 tx_currdescnum; + u32 rx_currdescnum; struct eth_mac_regs *mac_regs_p; struct eth_dma_regs *dma_regs_p; -- cgit v1.1 From 49692c5f517d8e44ed9db0de778728fe7d2a300c Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 8 May 2014 22:26:35 +0100 Subject: net/designware: Make DMA burst length configurable and reduce by default The correct value for this setting can vary across SoCs and boards, so make it configurable. Also reduce the default value to 8, which is the same default as used in the Linux driver. Signed-off-by: Ian Campbell Cc: Alexey Brodkin --- drivers/net/designware.c | 2 +- drivers/net/designware.h | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/designware.c b/drivers/net/designware.c index fa816bf..7186e3b 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -249,7 +249,7 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis) rx_descs_init(dev); tx_descs_init(dev); - writel(FIXEDBURST | PRIORXTX_41 | BURST_16, &dma_p->busmode); + writel(FIXEDBURST | PRIORXTX_41 | DMA_PBL, &dma_p->busmode); writel(readl(&dma_p->opmode) | FLUSHTXFIFO | STOREFORWARD, &dma_p->opmode); diff --git a/drivers/net/designware.h b/drivers/net/designware.h index de2fdcb..ce51102 100644 --- a/drivers/net/designware.h +++ b/drivers/net/designware.h @@ -77,18 +77,18 @@ struct eth_dma_regs { #define DW_DMA_BASE_OFFSET (0x1000) +/* Default DMA Burst length */ +#ifndef CONFIG_DW_GMAC_DEFAULT_DMA_PBL +#define CONFIG_DW_GMAC_DEFAULT_DMA_PBL 8 +#endif + /* Bus mode register definitions */ #define FIXEDBURST (1 << 16) #define PRIORXTX_41 (3 << 14) #define PRIORXTX_31 (2 << 14) #define PRIORXTX_21 (1 << 14) #define PRIORXTX_11 (0 << 14) -#define BURST_1 (1 << 8) -#define BURST_2 (2 << 8) -#define BURST_4 (4 << 8) -#define BURST_8 (8 << 8) -#define BURST_16 (16 << 8) -#define BURST_32 (32 << 8) +#define DMA_PBL (CONFIG_DW_GMAC_DEFAULT_DMA_PBL<<8) #define RXHIGHPRIO (1 << 1) #define DMAMAC_SRST (1 << 0) -- cgit v1.1 From 12bbc0ba813463fd3c7b433c37abcd3f67b37ff3 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Wed, 19 Mar 2014 14:48:44 +0800 Subject: ARM: atmel: switch to main crystal osc for SPL boot MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If without switch to main crystal oscillator, the sama5d3 SoC will use internal on chip RC oscillator. In order to get better accuracy, switch to main crystal oscillator. Signed-off-by: Bo Shen Signed-off-by: Andreas Bießmann --- arch/arm/cpu/at91-common/spl.c | 39 +++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-at91/at91_pmc.h | 4 ++++ 2 files changed, 43 insertions(+) diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c index 7f4debb..cbb5a52 100644 --- a/arch/arm/cpu/at91-common/spl.c +++ b/arch/arm/cpu/at91-common/spl.c @@ -20,6 +20,43 @@ static void at91_disable_wdt(void) writel(AT91_WDT_MR_WDDIS, &wdt->mr); } +static void switch_to_main_crystal_osc(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 tmp; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_OSCOUNT(0xff); + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_MOSCEN; + tmp |= AT91_PMC_MOR_OSCOUNT(8); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCS)) + ; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_OSCBYPASS; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + + tmp = readl(&pmc->mor); + tmp |= AT91_PMC_MOR_MOSCSEL; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + + while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCSELS)) + ; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_MOSCRCEN; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); +} + void at91_plla_init(u32 pllar) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; @@ -76,6 +113,8 @@ u32 spl_boot_mode(void) void s_init(void) { + switch_to_main_crystal_osc(); + /* disable watchdog */ at91_disable_wdt(); diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h index 4535608..04f6239 100644 --- a/arch/arm/include/asm/arch-at91/at91_pmc.h +++ b/arch/arm/include/asm/arch-at91/at91_pmc.h @@ -70,7 +70,10 @@ typedef struct at91_pmc { #define AT91_PMC_MOR_MOSCEN 0x01 #define AT91_PMC_MOR_OSCBYPASS 0x02 +#define AT91_PMC_MOR_MOSCRCEN 0x08 #define AT91_PMC_MOR_OSCOUNT(x) ((x & 0xff) << 8) +#define AT91_PMC_MOR_KEY(x) ((x & 0xff) << 16) +#define AT91_PMC_MOR_MOSCSEL (1 << 24) #define AT91_PMC_PLLXR_DIV(x) (x & 0xFF) #define AT91_PMC_PLLXR_PLLCOUNT(x) ((x & 0x3F) << 8) @@ -142,6 +145,7 @@ typedef struct at91_pmc { #define AT91_PMC_IXR_PCKRDY1 0x00000200 #define AT91_PMC_IXR_PCKRDY2 0x00000400 #define AT91_PMC_IXR_PCKRDY3 0x00000800 +#define AT91_PMC_IXR_MOSCSELS 0x00010000 #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ -- cgit v1.1 From cd23aac4bf978970bea3f460e0b55315c94c1fee Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Wed, 19 Mar 2014 14:48:45 +0800 Subject: ARM: atmel: enable SPL on sama5d3_xplained board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It supports boot from NAND and SD/MMC card. Signed-off-by: Bo Shen Signed-off-by: Andreas Bießmann --- board/atmel/sama5d3_xplained/sama5d3_xplained.c | 87 +++++++++++++++++++++++++ include/configs/sama5d3_xplained.h | 50 ++++++++++++++ 2 files changed, 137 insertions(+) diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c index 39f2dc6..92ed4e8 100644 --- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c +++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c @@ -17,6 +17,9 @@ #include #include #include +#include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -128,3 +131,87 @@ int board_mmc_init(bd_t *bis) return 0; } #endif + +/* SPL */ +#ifdef CONFIG_SPL_BUILD +void spl_board_init(void) +{ +#ifdef CONFIG_SYS_USE_MMC + sama5d3_xplained_mci0_hw_init(); +#elif CONFIG_SYS_USE_NANDFLASH + sama5d3_xplained_nand_hw_init(); +#endif +} + +static void ddr2_conf(struct atmel_mpddr *ddr2) +{ + ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM); + + ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | + ATMEL_MPDDRC_CR_NR_ROW_14 | + ATMEL_MPDDRC_CR_CAS_DDR_CAS3 | + ATMEL_MPDDRC_CR_ENRDM_ON | + ATMEL_MPDDRC_CR_NB_8BANKS | + ATMEL_MPDDRC_CR_NDQS_DISABLED | + ATMEL_MPDDRC_CR_DECOD_INTERLEAVED | + ATMEL_MPDDRC_CR_UNAL_SUPPORTED); + /* + * As the DDR2-SDRAm device requires a refresh time is 7.8125us + * when DDR run at 133MHz, so it needs (7.8125us * 133MHz / 10^9) clocks + */ + ddr2->rtr = 0x411; + + ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | + 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); + + ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | + 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | + 28 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | + 26 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET); + + ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | + 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | + 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); +} + +void mem_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct atmel_mpddr ddr2; + + ddr2_conf(&ddr2); + + /* enable MPDDR clock */ + at91_periph_clk_enable(ATMEL_ID_MPDDRC); + writel(0x4, &pmc->scer); + + /* DDRAM2 Controller initialize */ + ddr2_init(ATMEL_BASE_DDRCS, &ddr2); +} + +void at91_pmc_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 tmp; + + tmp = AT91_PMC_PLLAR_29 | + AT91_PMC_PLLXR_PLLCOUNT(0x3f) | + AT91_PMC_PLLXR_MUL(43) | + AT91_PMC_PLLXR_DIV(1); + at91_plla_init(tmp); + + writel(0x3 << 8, &pmc->pllicpr); + + tmp = AT91_PMC_MCKR_MDIV_4 | + AT91_PMC_MCKR_CSS_PLLA; + at91_mck_init(tmp); +} +#endif diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 41c946d..e826e2d 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -20,7 +20,11 @@ #define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT + +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT +#endif + #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO @@ -74,8 +78,12 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x10000000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x310000 +#else #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif /* NAND flash */ #define CONFIG_CMD_NAND @@ -199,4 +207,46 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +/* SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 + +#endif + #endif -- cgit v1.1 From 525049d3477af67e23dfd17dcb6cb66b34924536 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Thu, 24 Apr 2014 11:42:13 +0800 Subject: ARM: atmel: sama5d3xek: convert to generic board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot: "Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed." Signed-off-by: Bo Shen Tested-by: Josh Wu Signed-off-by: Andreas Bießmann --- include/configs/sama5d3xek.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 516be85..20a5f6e 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -34,6 +34,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* Device Tree support */ +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_AT91_GPIO -- cgit v1.1 From 9652296ea3ba2e00f6b02b61248ed373d24d0b93 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Thu, 24 Apr 2014 11:42:14 +0800 Subject: ARM: atmel: sama5d3_xplained: convert to generic board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot: "Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed." Signed-off-by: Bo Shen Signed-off-by: Andreas Bießmann --- include/configs/sama5d3_xplained.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index e826e2d..be6bb93 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -31,6 +31,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* Device Tree support */ +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_AT91_GPIO -- cgit v1.1 From 68f164772e6caa11a71d394ee96ff1fd4d29c832 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Thu, 24 Apr 2014 11:42:15 +0800 Subject: ARM: atmel: at91sam9m10g45ek: convert to generic board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot: "Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed." Signed-off-by: Bo Shen Tested-by: Josh Wu Signed-off-by: Andreas Bießmann --- include/configs/at91sam9m10g45ek.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index ccfda71..7a3c9b5 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -34,6 +34,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO -- cgit v1.1 From 495275925192edb0c5bd6cb1e3b6f85162ffd06b Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Thu, 24 Apr 2014 11:42:16 +0800 Subject: ARM: atmel: at91sam9x5ek: convert to generic board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot: "Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed." Signed-off-by: Bo Shen Tested-by: Josh Wu Signed-off-by: Andreas Bießmann --- include/configs/at91sam9x5ek.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index f0a6757..5fc00af 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -30,6 +30,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO -- cgit v1.1 From 7d82d897722f57389ebe15924f47fab452cc3a19 Mon Sep 17 00:00:00 2001 From: "Wu, Josh" Date: Wed, 7 May 2014 16:50:45 +0800 Subject: gpio: at91: add sanity check for the NULL pointer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need check the NULL pointer as at91_pio_get_port() may return NULL. Also print a error message when at91_pio_get_port() failed otherwise we cannot notice the failure. Signed-off-by: Josh Wu Signed-off-by: Andreas Bießmann --- drivers/gpio/at91_gpio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c index 0b70071..6517af1 100644 --- a/drivers/gpio/at91_gpio.c +++ b/drivers/gpio/at91_gpio.c @@ -34,6 +34,7 @@ static struct at91_port *at91_pio_get_port(unsigned port) #endif #endif default: + printf("Error: at91_gpio: Fail to get PIO base!\n"); return NULL; } } @@ -200,7 +201,7 @@ int at91_set_pio_output(unsigned port, u32 pin, int value) struct at91_port *at91_port = at91_pio_get_port(port); u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (port < ATMEL_PIO_PORTS) && (pin < 32)) { mask = 1 << pin; writel(mask, &at91_port->idr); writel(mask, &at91_port->pudr); -- cgit v1.1 From 9902c7b6f1c9b1e99e4d7c62cc7e98257aa04d0b Mon Sep 17 00:00:00 2001 From: "Wu, Josh" Date: Wed, 7 May 2014 17:06:08 +0800 Subject: mmc: atmel_mci: fix print incorrect buffer content for debug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Josh Wu [fix checkpatch line length warning] Signed-off-by: Andreas Bießmann --- drivers/mmc/gen_atmel_mci.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index acca026..a57a9b1 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -243,9 +243,10 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) #ifdef DEBUG if (data->flags & MMC_DATA_READ) { + u32 cnt = word_count * 4; printf("Read Data:\n"); - print_buffer(0, data->dest, 1, - word_count*4, 0); + print_buffer(0, data->dest + cnt * block_count, + 1, cnt, 0); } #endif #ifdef DEBUG -- cgit v1.1 From ecd04611f6001901734b7c6e938fc9e36cbf930c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= Date: Fri, 16 May 2014 10:51:05 +0200 Subject: corvus: remove unneeded CONFIG_AT91_LEGACY MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Andreas Bießmann Cc: Heiko Schocher --- include/configs/corvus.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 959e188..631add3 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -27,7 +27,6 @@ #define CONFIG_SYS_TEXT_BASE 0x73f00000 -#define CONFIG_AT91_LEGACY #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ /* ARM asynchronous clock */ -- cgit v1.1 From 7b1a411743db47648b2955c414a71836823acfd9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= Date: Mon, 19 May 2014 14:23:39 +0200 Subject: mkimage: add atmelimage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The new atmelimage converts a machine code BLOB to bootable ROM image. Atmel ROM has no sophisticated image format, it only checks the first 7 ARM vectors. The vectors can contain valid B or LDR opcodes, the 6'th vector contains the image size to load. Additionally the PMECC header can be written by the atmelimage target. The parameters must be given via the -n switch as a coma separated list. For example: mkimage -T atmelimage \ -n usePmecc=1,sectorPerPage=4,sectorSize=512,spareSize=64,eccBits=4,eccOffset=36 \ -d spl/u-boot-spl.bin boot.bin A provided image can be checked for correct header setup. It prints out the PMECC header parameters if it has one and the 6'th interrupt vector content. ---8<--- Image Type: ATMEL ROM-Boot Image with PMECC Header PMECC header ==================== eccOffset: 36 sectorSize: 512 eccBitReq: 4 spareSize: 64 nbSectorPerPage: 4 usePmecc: 1 ==================== 6'th vector has 17044 set --->8--- A SPL binary modified with the atmelimage mkimage target was succesfully booted on a sama5d34ek via MMC and NAND. Signed-off-by: Andreas Bießmann Cc: Bo Shen Cc: Heiko Schocher Tested-by: Bo Shen --- common/image.c | 1 + include/image.h | 1 + tools/Makefile | 1 + tools/atmelimage.c | 342 +++++++++++++++++++++++++++++++++++++++++++++++++++++ tools/imagetool.c | 2 + tools/imagetool.h | 1 + 6 files changed, 348 insertions(+) create mode 100644 tools/atmelimage.c diff --git a/common/image.c b/common/image.c index fa4864d..26eb89a 100644 --- a/common/image.c +++ b/common/image.c @@ -139,6 +139,7 @@ static const table_entry_t uimage_type[] = { { IH_TYPE_STANDALONE, "standalone", "Standalone Program", }, { IH_TYPE_UBLIMAGE, "ublimage", "Davinci UBL image",}, { IH_TYPE_MXSIMAGE, "mxsimage", "Freescale MXS Boot Image",}, + { IH_TYPE_ATMELIMAGE, "atmelimage", "ATMEL ROM-Boot Image",}, { -1, "", "", }, }; diff --git a/include/image.h b/include/image.h index 1886168..41e56ab 100644 --- a/include/image.h +++ b/include/image.h @@ -225,6 +225,7 @@ struct lmb; #define IH_TYPE_PBLIMAGE 15 /* Freescale PBL Boot Image */ #define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */ #define IH_TYPE_GPIMAGE 17 /* TI Keystone GPHeader Image */ +#define IH_TYPE_ATMELIMAGE 18 /* ATMEL ROM bootable Image */ /* * Compression Types diff --git a/tools/Makefile b/tools/Makefile index b645224..e6d8045 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -69,6 +69,7 @@ RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := rsa-sign.o rsa-verify.o rsa-checksum.o # common objs for dumpimage and mkimage dumpimage-mkimage-objs := aisimage.o \ + atmelimage.o \ $(FIT_SIG_OBJS-y) \ crc32.o \ default_image.o \ diff --git a/tools/atmelimage.c b/tools/atmelimage.c new file mode 100644 index 0000000..c8101d2 --- /dev/null +++ b/tools/atmelimage.c @@ -0,0 +1,342 @@ +/* + * (C) Copyright 2014 + * Andreas Bießmann + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imagetool.h" +#include "mkimage.h" + +#include + +#define pr_err(fmt, args...) fprintf(stderr, "atmelimage Error: " fmt, ##args) + +static int atmel_check_image_type(uint8_t type) +{ + if (type == IH_TYPE_ATMELIMAGE) + return EXIT_SUCCESS; + else + return EXIT_FAILURE; +} + +static uint32_t nand_pmecc_header[52]; + +/* + * A helper struct for parsing the mkimage -n parameter + * + * Keep in same order as the configs array! + */ +static struct pmecc_config { + int use_pmecc; + int sector_per_page; + int spare_size; + int ecc_bits; + int sector_size; + int ecc_offset; +} pmecc; + +/* + * Strings used for configure the PMECC header via -n mkimage switch + * + * We estimate a coma separated list of key=value pairs. The mkimage -n + * parameter argument should not contain any whitespace. + * + * Keep in same order as struct pmecc_config! + */ +static const char * const configs[] = { + "usePmecc", + "sectorPerPage", + "spareSize", + "eccBits", + "sectorSize", + "eccOffset" +}; + +static int atmel_find_pmecc_parameter_in_token(const char *token) +{ + size_t pos; + char *param; + + debug("token: '%s'\n", token); + + for (pos = 0; pos < ARRAY_SIZE(configs); pos++) { + if (strncmp(token, configs[pos], strlen(configs[pos])) == 0) { + param = strstr(token, "="); + if (!param) + goto err; + + param++; + debug("\t%s parameter: '%s'\n", configs[pos], param); + + switch (pos) { + case 0: + pmecc.use_pmecc = strtol(param, NULL, 10); + return EXIT_SUCCESS; + case 1: + pmecc.sector_per_page = strtol(param, NULL, 10); + return EXIT_SUCCESS; + case 2: + pmecc.spare_size = strtol(param, NULL, 10); + return EXIT_SUCCESS; + case 3: + pmecc.ecc_bits = strtol(param, NULL, 10); + return EXIT_SUCCESS; + case 4: + pmecc.sector_size = strtol(param, NULL, 10); + return EXIT_SUCCESS; + case 5: + pmecc.ecc_offset = strtol(param, NULL, 10); + return EXIT_SUCCESS; + } + } + } + +err: + pr_err("Could not find parameter in token '%s'\n", token); + return EXIT_FAILURE; +} + +static int atmel_parse_pmecc_params(char *txt) +{ + char *token; + + token = strtok(txt, ","); + while (token != NULL) { + if (atmel_find_pmecc_parameter_in_token(token)) + return EXIT_FAILURE; + + token = strtok(NULL, ","); + } + + return EXIT_SUCCESS; +} + +static int atmel_verify_header(unsigned char *ptr, int image_size, + struct image_tool_params *params) +{ + uint32_t *ints = (uint32_t *)ptr; + size_t pos; + size_t size = image_size; + + /* check if we have an PMECC header attached */ + for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) + if (ints[pos] >> 28 != 0xC) + break; + + if (pos == ARRAY_SIZE(nand_pmecc_header)) { + ints += ARRAY_SIZE(nand_pmecc_header); + size -= sizeof(nand_pmecc_header); + } + + /* check the seven interrupt vectors of binary */ + for (pos = 0; pos < 7; pos++) { + debug("atmelimage: interrupt vector #%d is 0x%08X\n", pos+1, + ints[pos]); + /* + * all vectors except the 6'th one must contain valid + * LDR or B Opcode + */ + if (pos == 5) + /* 6'th vector has image size set, check later */ + continue; + if ((ints[pos] & 0xff000000) == 0xea000000) + /* valid B Opcode */ + continue; + if ((ints[pos] & 0xfffff000) == 0xe59ff000) + /* valid LDR (I=0, P=1, U=1, B=0, W=0, L=1) */ + continue; + /* ouch, one of the checks has missed ... */ + return 1; + } + + return ints[5] != cpu_to_le32(size); +} + +static void atmel_print_pmecc_header(const uint32_t word) +{ + int val; + + printf("\t\tPMECC header\n"); + + printf("\t\t====================\n"); + + val = (word >> 18) & 0x1ff; + printf("\t\teccOffset: %9i\n", val); + + val = (((word >> 16) & 0x3) == 0) ? 512 : 1024; + printf("\t\tsectorSize: %8i\n", val); + + if (((word >> 13) & 0x7) <= 2) + val = (2 << ((word >> 13) & 0x7)); + else + val = (12 << (((word >> 13) & 0x7) - 3)); + printf("\t\teccBitReq: %9i\n", val); + + val = (word >> 4) & 0x1ff; + printf("\t\tspareSize: %9i\n", val); + + val = (1 << ((word >> 1) & 0x3)); + printf("\t\tnbSectorPerPage: %3i\n", val); + + printf("\t\tusePmecc: %10i\n", word & 0x1); + printf("\t\t====================\n"); +} + +static void atmel_print_header(const void *ptr) +{ + uint32_t *ints = (uint32_t *)ptr; + size_t pos; + + /* check if we have an PMECC header attached */ + for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) + if (ints[pos] >> 28 != 0xC) + break; + + if (pos == ARRAY_SIZE(nand_pmecc_header)) { + printf("Image Type:\tATMEL ROM-Boot Image with PMECC Header\n"); + atmel_print_pmecc_header(ints[0]); + pos += 5; + } else { + printf("Image Type:\tATMEL ROM-Boot Image without PMECC Header\n"); + pos = 5; + } + printf("\t\t6'th vector has %u set\n", le32_to_cpu(ints[pos])); +} + +static void atmel_set_header(void *ptr, struct stat *sbuf, int ifd, + struct image_tool_params *params) +{ + /* just save the image size into 6'th interrupt vector */ + uint32_t *ints = (uint32_t *)ptr; + size_t cnt; + size_t pos = 5; + size_t size = sbuf->st_size; + + for (cnt = 0; cnt < ARRAY_SIZE(nand_pmecc_header); cnt++) + if (ints[cnt] >> 28 != 0xC) + break; + + if (cnt == ARRAY_SIZE(nand_pmecc_header)) { + pos += ARRAY_SIZE(nand_pmecc_header); + size -= sizeof(nand_pmecc_header); + } + + ints[pos] = cpu_to_le32(size); +} + +static int atmel_check_params(struct image_tool_params *params) +{ + if (strlen(params->imagename) > 0) + if (atmel_parse_pmecc_params(params->imagename)) + return EXIT_FAILURE; + + return !(!params->eflag && + !params->fflag && + !params->xflag && + ((params->dflag && !params->lflag) || + (params->lflag && !params->dflag))); +} + +static int atmel_vrec_header(struct image_tool_params *params, + struct image_type_params *tparams) +{ + uint32_t tmp; + size_t pos; + + if (strlen(params->imagename) == 0) + return EXIT_SUCCESS; + + tmp = 0xC << 28; + + tmp |= (pmecc.ecc_offset & 0x1ff) << 18; + + switch (pmecc.sector_size) { + case 512: + tmp |= 0 << 16; + break; + case 1024: + tmp |= 1 << 16; + break; + + default: + pr_err("Wrong sectorSize (%i) for PMECC header\n", + pmecc.sector_size); + return EXIT_FAILURE; + } + + switch (pmecc.ecc_bits) { + case 2: + tmp |= 0 << 13; + break; + case 4: + tmp |= 1 << 13; + break; + case 8: + tmp |= 2 << 13; + break; + case 12: + tmp |= 3 << 13; + break; + case 24: + tmp |= 4 << 13; + break; + + default: + pr_err("Wrong eccBits (%i) for PMECC header\n", + pmecc.ecc_bits); + return EXIT_FAILURE; + } + + tmp |= (pmecc.spare_size & 0x1ff) << 4; + + switch (pmecc.sector_per_page) { + case 1: + tmp |= 0 << 1; + break; + case 2: + tmp |= 1 << 1; + break; + case 4: + tmp |= 2 << 1; + break; + case 8: + tmp |= 3 << 1; + break; + + default: + pr_err("Wrong sectorPerPage (%i) for PMECC header\n", + pmecc.sector_per_page); + return EXIT_FAILURE; + } + + if (pmecc.use_pmecc) + tmp |= 1; + + for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) + nand_pmecc_header[pos] = tmp; + + debug("PMECC header filled 52 times with 0x%08X\n", tmp); + + tparams->header_size = sizeof(nand_pmecc_header); + tparams->hdr = nand_pmecc_header; + + return EXIT_SUCCESS; +} + +static struct image_type_params atmelimage_params = { + .name = "ATMEL ROM-Boot Image support", + .header_size = 0, + .hdr = NULL, + .check_image_type = atmel_check_image_type, + .verify_header = atmel_verify_header, + .print_header = atmel_print_header, + .set_header = atmel_set_header, + .check_params = atmel_check_params, + .vrec_header = atmel_vrec_header, +}; + +void init_atmel_image_type(void) +{ + register_image_type(&atmelimage_params); +} diff --git a/tools/imagetool.c b/tools/imagetool.c index da72115..32d6278 100644 --- a/tools/imagetool.c +++ b/tools/imagetool.c @@ -27,6 +27,8 @@ void register_image_tool(imagetool_register_t image_register) */ register_func = image_register; + /* Init ATMEL ROM Boot Image generation/list support */ + init_atmel_image_type(); /* Init Freescale PBL Boot image generation/list support */ init_pbl_image_type(); /* Init Kirkwood Boot image generation/list support */ diff --git a/tools/imagetool.h b/tools/imagetool.h index a3e9d30..c480687 100644 --- a/tools/imagetool.h +++ b/tools/imagetool.h @@ -159,6 +159,7 @@ void register_image_type(struct image_type_params *tparams); * Supported image types init functions */ void init_default_image_type(void); +void init_atmel_image_type(void); void init_pbl_image_type(void); void init_ais_image_type(void); void init_kwb_image_type(void); -- cgit v1.1 From 5c390a5b26ce53a6534b99c22bb762484e6b3497 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= Date: Mon, 19 May 2014 14:23:40 +0200 Subject: arm:at91: enable ROM loadable atmel image MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For sama5d3xek we need to modify the SPL image for correct detection by ROM code. Signed-off-by: Andreas Bießmann Tested-by: Bo Shen --- arch/arm/cpu/armv7/at91/config.mk | 10 ++++++++ doc/README.atmel_pmecc | 21 ++++++++++++++++ spl/Makefile | 11 +++++++++ tools/Makefile | 2 ++ tools/atmel_pmecc_params.c | 51 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 95 insertions(+) create mode 100644 arch/arm/cpu/armv7/at91/config.mk create mode 100644 tools/atmel_pmecc_params.c diff --git a/arch/arm/cpu/armv7/at91/config.mk b/arch/arm/cpu/armv7/at91/config.mk new file mode 100644 index 0000000..09eab70 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/config.mk @@ -0,0 +1,10 @@ +# +# Copyright (C) 2014, Andreas Bießmann +# +# SPDX-License-Identifier: GPL-2.0+ +# +ifdef CONFIG_SPL_BUILD +ALL-y += boot.bin +else +ALL-y += u-boot.img +endif diff --git a/doc/README.atmel_pmecc b/doc/README.atmel_pmecc index cf8373b..cc0f73d 100644 --- a/doc/README.atmel_pmecc +++ b/doc/README.atmel_pmecc @@ -27,3 +27,24 @@ Take AT91SAM9X5EK as an example, the board definition file likes: #define CONFIG_ATMEL_NAND_HW_PMECC 1 #define CONFIG_PMECC_CAP 2 #define CONFIG_PMECC_SECTOR_SIZE 512 + +How to enable PMECC header for direct programmable boot.bin +----------------------------------------------------------- +2014-05-19 Andreas Bießmann + +The usual way to program SPL into NAND flash is to use the SAM-BA Atmel tool. +This however is often not usable when doing field updates. To be able to +program a SPL binary into NAND flash we need to add the PMECC header to the +binary before. Chapter '12.4.4.1 NAND Flash Boot: NAND Flash Detection' in +sama5d3 SoC spec (as of 03. April 2014) defines how this PMECC header has to +look like. In order to do so we have a new image type added to mkimage to +generate this PMECC header and integrated this into the build process of SPL. + +To enable the generation of atmel PMECC header for SPL one need to define +CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER. The required parameters are taken from +board configuration and compiled into the host tools atmel_pmecc_params. This +tool will be called in build process to parametrize mkimage for atmelimage +type. The mkimage tool has intentionally _not_ compiled in those parameters. + +The mkimage image type atmelimage also set the 6'th interrupt vector to the +correct value. This feature can also be used to setup a boot.bin for MMC boot. diff --git a/spl/Makefile b/spl/Makefile index bfb7c8a..bf677aa 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -183,6 +183,17 @@ MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE) MLO MLO.byteswap: $(obj)/u-boot-spl.bin $(call if_changed,mkimage) +MKIMAGEFLAGS_boot.bin = -T atmelimage + +ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y) +MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params) + +boot.bin: $(obj)/../tools/atmel_pmecc_params +endif + +boot.bin: $(obj)/u-boot-spl.bin + $(call if_changed,mkimage) + ALL-y += $(obj)/$(SPL_BIN).bin ifdef CONFIG_SAMSUNG diff --git a/tools/Makefile b/tools/Makefile index e6d8045..7610557 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -38,6 +38,8 @@ ENVCRC-$(CONFIG_ENV_IS_IN_NVRAM) = y ENVCRC-$(CONFIG_ENV_IS_IN_SPI_FLASH) = y CONFIG_BUILD_ENVCRC ?= $(ENVCRC-y) +hostprogs-$(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER) += atmel_pmecc_params$(SFX) + # TODO: CONFIG_CMD_LICENSE does not work hostprogs-$(CONFIG_CMD_LICENSE) += bin2header$(SFX) hostprogs-$(CONFIG_LCD_LOGO) += bmp_logo$(SFX) diff --git a/tools/atmel_pmecc_params.c b/tools/atmel_pmecc_params.c new file mode 100644 index 0000000..8eaf27f --- /dev/null +++ b/tools/atmel_pmecc_params.c @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2014 Andreas Bießmann + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This is a host tool for generating an appropriate string out of board + * configuration. The string is required for correct generation of PMECC + * header which in turn is required for NAND flash booting of Atmel AT91 style + * hardware. + * + * See doc/README.atmel_pmecc for more information. + */ + +#include +#include + +static int pmecc_get_ecc_bytes(int cap, int sector_size) +{ + int m = 12 + sector_size / 512; + return (m * cap + 7) / 8; +} + +int main(int argc, char *argv[]) +{ + unsigned int use_pmecc = 0; + unsigned int sector_per_page; + unsigned int sector_size = CONFIG_PMECC_SECTOR_SIZE; + unsigned int oob_size = CONFIG_SYS_NAND_OOBSIZE; + unsigned int ecc_bits = CONFIG_PMECC_CAP; + unsigned int ecc_offset; + +#ifdef CONFIG_ATMEL_NAND_HW_PMECC + use_pmecc = 1; +#endif + + sector_per_page = CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_PMECC_SECTOR_SIZE; + ecc_offset = oob_size - + pmecc_get_ecc_bytes(ecc_bits, sector_size) * sector_per_page; + + printf("usePmecc=%d,", use_pmecc); + printf("sectorPerPage=%d,", sector_per_page); + printf("sectorSize=%d,", sector_size); + printf("spareSize=%d,", oob_size); + printf("eccBits=%d,", ecc_bits); + printf("eccOffset=%d", ecc_offset); + printf("\n"); + + exit(EXIT_SUCCESS); +} -- cgit v1.1 From e166a8311ff29c020b6f17f133ada53e6f98befa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= Date: Mon, 19 May 2014 14:23:41 +0200 Subject: sama5d3xek: enable PMECC header generation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Andreas Bießmann Cc: Bo Shen Tested-by: Bo Shen --- include/configs/sama5d3xek.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 20a5f6e..fe63d80 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -283,6 +283,7 @@ #define CONFIG_SYS_NAND_OOBSIZE 64 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH #define CONFIG_SPL_SPI_SUPPORT -- cgit v1.1 From 2ff22cf4a810af34db989f62cd66d5e0864804b5 Mon Sep 17 00:00:00 2001 From: "Wu, Josh" Date: Tue, 20 May 2014 17:27:28 +0800 Subject: ARM: at91: remove AT91X40 macro since it is not use any more MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The at91x40.h is not exist. So we remove it. Signed-off-by: Josh Wu Signed-off-by: Andreas Bießmann --- arch/arm/include/asm/arch-at91/hardware.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h index a63f974..d712a0d 100644 --- a/arch/arm/include/asm/arch-at91/hardware.h +++ b/arch/arm/include/asm/arch-at91/hardware.h @@ -25,8 +25,6 @@ # include #elif defined(CONFIG_AT91CAP9) # include -#elif defined(CONFIG_AT91X40) -# include #elif defined(CONFIG_SAMA5D3) # include #else -- cgit v1.1 From 168a48f39f6e3437f15d379530f89e204a6a81a7 Mon Sep 17 00:00:00 2001 From: "Wu, Josh" Date: Tue, 20 May 2014 17:44:43 +0800 Subject: ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Josh Wu Signed-off-by: Andreas Bießmann --- arch/arm/include/asm/arch-at91/at91sam9x5.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h index a471038..d49c184 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -12,6 +12,9 @@ #ifndef __AT91SAM9X5_H__ #define __AT91SAM9X5_H__ +#define CONFIG_ARM926EJS /* ARM926EJS Core */ +#define CONFIG_AT91FAMILY /* it's a member of AT91 family */ + /* * Peripheral identifiers/interrupts. */ -- cgit v1.1 From 7f6bd0da9b06afb534bc13ef02b15eb7a5f067e3 Mon Sep 17 00:00:00 2001 From: "Wu, Josh" Date: Tue, 20 May 2014 17:44:44 +0800 Subject: at91: remove redundant AT91FAMILY definition in board config file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now the AT91FAMILY is already defined in the at91 SoC header. The at91 board config file will include the SoC header file. So we can remove the redundant AT91FAMILY definition in at91 board config files. Signed-off-by: Josh Wu [rebase patch] Signed-off-by: Andreas Bießmann --- include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/corvus.h | 2 -- include/configs/cpu9260.h | 1 - include/configs/ethernut5.h | 1 - include/configs/sama5d3_xplained.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/vl_ma2sc.h | 1 - 9 files changed, 10 deletions(-) diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 7a3c9b5..5d5fbe5 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -22,7 +22,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ #define CONFIG_AT91SAM9M10G45EK -#define CONFIG_AT91FAMILY #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index e23549d..ebfc26e 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_TEXT_BASE 0x26f00000 #define CONFIG_ARM926EJS -#define CONFIG_AT91FAMILY /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 5fc00af..b1d4baa 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -18,7 +18,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ #define CONFIG_AT91SAM9X5EK -#define CONFIG_AT91FAMILY #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 631add3..6171060 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -33,8 +33,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_AT91FAMILY - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index 39f7062..1feaefd 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -32,7 +32,6 @@ #include -#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 480d867..89d668b 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -24,7 +24,6 @@ /* CPU information */ #define CONFIG_ARM926EJS -#define CONFIG_AT91FAMILY #define CONFIG_DISPLAY_CPUINFO /* Display at console. */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index be6bb93..f72ab0b 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -18,7 +18,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index fe63d80..da27180 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -21,7 +21,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h index 14c6e67..8e58ade 100644 --- a/include/configs/vl_ma2sc.h +++ b/include/configs/vl_ma2sc.h @@ -14,7 +14,6 @@ /*--------------------------------------------------------------------------*/ #define CONFIG_ARM926EJS /* This is an ARM926EJS Core */ -#define CONFIG_AT91FAMILY #define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/ #define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */ #define CONFIG_ARCH_CPU_INIT -- cgit v1.1 From e83c4d24b12266d5616429b60e1a15e04c507e89 Mon Sep 17 00:00:00 2001 From: "Wu, Josh" Date: Tue, 20 May 2014 17:44:45 +0800 Subject: ARM: at91: remove redundant ARM926EJS definition in board config files MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As at91 board config file will include the SoC header, so we can remove the ARM926EJS definition in board config files. Signed-off-by: Josh Wu Signed-off-by: Andreas Bießmann --- include/configs/at91sam9n12ek.h | 2 -- include/configs/ethernut5.h | 1 - include/configs/vl_ma2sc.h | 1 - 3 files changed, 4 deletions(-) diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index ebfc26e..9b0e588 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -18,8 +18,6 @@ #define CONFIG_SYS_TEXT_BASE 0x26f00000 -#define CONFIG_ARM926EJS - /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 89d668b..c81fc44 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -23,7 +23,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5 /* CPU information */ -#define CONFIG_ARM926EJS #define CONFIG_DISPLAY_CPUINFO /* Display at console. */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h index 8e58ade..bef821f 100644 --- a/include/configs/vl_ma2sc.h +++ b/include/configs/vl_ma2sc.h @@ -13,7 +13,6 @@ /*--------------------------------------------------------------------------*/ -#define CONFIG_ARM926EJS /* This is an ARM926EJS Core */ #define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/ #define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */ #define CONFIG_ARCH_CPU_INIT -- cgit v1.1 From cf874c190e1796a77be6661cacc43aebb94c7a57 Mon Sep 17 00:00:00 2001 From: "Wu, Josh" Date: Wed, 21 May 2014 10:42:15 +0800 Subject: ARM: at91sam9m10g45ek: enable mci0 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Also we enable the mmc command in configuration file. As both CONFIG_CMD_MMC and CONFIG_CMD_USB use the CONFIG_DOS_PARTITION, so remove the redundant CONFIG_DOS_PARTITION definition. Signed-off-by: Josh Wu Signed-off-by: Andreas Bießmann --- arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 17 +++++++++++++++++ board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 10 ++++++++++ include/configs/at91sam9m10g45ek.h | 15 ++++++++++++++- 3 files changed, 41 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c index 7d7725c..0e6c0da 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c @@ -165,3 +165,20 @@ void at91_macb_hw_init(void) #endif } #endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +void at91_mci_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI0 CLK */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI0 CDA */ + at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI0 DA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* MCI0 DA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI0 DA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI0 DA3 */ + + /* Enable clock */ + writel(1 << ATMEL_ID_MCI0, &pmc->pcer); +} +#endif diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index b7e2efd..5788116 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -16,6 +16,7 @@ #include #include #include +#include #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include #endif @@ -217,6 +218,15 @@ void lcd_show_board_info(void) #endif /* CONFIG_LCD_INFO */ #endif +#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bis) +{ + at91_mci_hw_init(); + + return atmel_mci_init((void *)ATMEL_BASE_MCI0); +} +#endif + int board_early_init_f(void) { at91_seriald_hw_init(); diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 5d5fbe5..61f7bc2 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -116,6 +116,20 @@ #endif +/* MMC */ +#define CONFIG_CMD_MMC + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* Ethernet */ #define CONFIG_MACB #define CONFIG_RMII @@ -127,7 +141,6 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 -#define CONFIG_DOS_PARTITION #define CONFIG_USB_STORAGE #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ -- cgit v1.1 From 9637a1bb896efe392a58dd2772e2c3fcb646409d Mon Sep 17 00:00:00 2001 From: "Wu, Josh" Date: Wed, 21 May 2014 10:42:16 +0800 Subject: ARM: at91sam9m10g45ek: add mmc environment configuration support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In this configuration the environment will save in file: uboot.env of mmc card. Signed-off-by: Josh Wu Signed-off-by: Andreas Bießmann --- boards.cfg | 1 + include/configs/at91sam9m10g45ek.h | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+) diff --git a/boards.cfg b/boards.cfg index 8b1177c..866f512 100644 --- a/boards.cfg +++ b/boards.cfg @@ -102,6 +102,7 @@ Active arm arm926ejs at91 atmel at91sam9263ek Active arm arm926ejs at91 atmel at91sam9263ek at91sam9263ek_norflash at91sam9263ek:AT91SAM9263,SYS_USE_NORFLASH Stelian Pop Active arm arm926ejs at91 atmel at91sam9263ek at91sam9263ek_norflash_boot at91sam9263ek:AT91SAM9263,SYS_USE_BOOT_NORFLASH Stelian Pop Active arm arm926ejs at91 atmel at91sam9m10g45ek at91sam9m10g45ek_nandflash at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH Bo Shen +Active arm arm926ejs at91 atmel at91sam9m10g45ek at91sam9m10g45ek_mmc at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_MMC Bo Shen Active arm arm926ejs at91 atmel at91sam9n12ek at91sam9n12ek_mmc at91sam9n12ek:AT91SAM9N12,SYS_USE_MMC Josh Wu Active arm arm926ejs at91 atmel at91sam9n12ek at91sam9n12ek_nandflash at91sam9n12ek:AT91SAM9N12,SYS_USE_NANDFLASH Josh Wu Active arm arm926ejs at91 atmel at91sam9n12ek at91sam9n12ek_spiflash at91sam9n12ek:AT91SAM9N12,SYS_USE_SPIFLASH Josh Wu diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 61f7bc2..341b21d 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -148,6 +148,7 @@ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END 0x23e00000 +#ifdef CONFIG_SYS_USE_NANDFLASH /* bootstrap + u-boot + env in nandflash */ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0xc0000 @@ -163,6 +164,24 @@ "256k(env),256k(env_redundant),256k(spare)," \ "512k(dtb),6M(kernel)ro,-(rootfs) " \ "root=/dev/mtdblock7 rw rootfstype=jffs2" +#elif CONFIG_SYS_USE_MMC +/* bootstrap + u-boot + env + linux in mmc */ +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE 0 +#define FAT_ENV_PART 1 +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define CONFIG_ENV_SIZE 0x4000 + +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "mtdparts=atmel_nand:" \ + "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ + "root=/dev/mmcblk0p2 rw rootwait" +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ + "fatload mmc 0:1 0x72000000 zImage; " \ + "bootz 0x72000000 - 0x71000000" +#endif #define CONFIG_BAUDRATE 115200 -- cgit v1.1