From 8a0c6d6fa9de22c0c148492a8759bb456d52887c Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 28 Mar 2014 11:00:04 -0500 Subject: OMAP: common: consolidate fake USB ethernet MAC address creation TI platforms such as OMAP5uevm, PandaBoard, use equivalent logic to generate fake USB MAC address from device unique DIE ID. Consolidate this to a generic location such that other TI platforms such as BeagleBoard-XM can also use the same. NOTE: at this point in time, I dont yet see a need for a generic dummy ethernet MAC address creation function, but if there is a need in the future, this can be further abstracted out. Signed-off-by: Nishanth Menon --- arch/arm/cpu/armv7/omap-common/utils.c | 21 +++++++++++++++++++++ arch/arm/include/asm/omap_common.h | 2 ++ board/ti/omap5_uevm/evm.c | 25 ++++++++----------------- board/ti/panda/panda.c | 21 ++++++--------------- 4 files changed, 37 insertions(+), 32 deletions(-) diff --git a/arch/arm/cpu/armv7/omap-common/utils.c b/arch/arm/cpu/armv7/omap-common/utils.c index aabf2bd..1696c2d 100644 --- a/arch/arm/cpu/armv7/omap-common/utils.c +++ b/arch/arm/cpu/armv7/omap-common/utils.c @@ -5,6 +5,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include +#include static void do_cancel_out(u32 *num, u32 *den, u32 factor) { while (1) { @@ -39,3 +40,23 @@ void cancel_out(u32 *num, u32 *den, u32 den_limit) *den = (*den + 1) / 2; } } + +void __weak usb_fake_mac_from_die_id(u32 *id) +{ + uint8_t device_mac[6]; + + if (!getenv("usbethaddr")) { + /* + * create a fake MAC address from the processor ID code. + * first byte is 0x02 to signify locally administered. + */ + device_mac[0] = 0x02; + device_mac[1] = id[3] & 0xff; + device_mac[2] = id[2] & 0xff; + device_mac[3] = id[1] & 0xff; + device_mac[4] = id[0] & 0xff; + device_mac[5] = (id[0] >> 8) & 0xff; + + eth_setenv_enetaddr("usbethaddr", device_mac); + } +} diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 04925bc..729723a 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -574,6 +574,8 @@ void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, u32 txdone, u32 txdone_mask, u32 opp); s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb); +void usb_fake_mac_from_die_id(u32 *id); + /* HW Init Context */ #define OMAP_INIT_CONTEXT_SPL 0 #define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR 1 diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index 3eaa5ac..4666b38 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -119,28 +119,19 @@ static void enable_host_clocks(void) int misc_init_r(void) { int reg; - uint8_t device_mac[6]; + u32 id[4]; #ifdef CONFIG_PALMAS_POWER palmas_init_settings(); #endif - if (!getenv("usbethaddr")) { - reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET; - - /* - * create a fake MAC address from the processor ID code. - * first byte is 0x02 to signify locally administered. - */ - device_mac[0] = 0x02; - device_mac[1] = readl(reg + 0x10) & 0xff; - device_mac[2] = readl(reg + 0xC) & 0xff; - device_mac[3] = readl(reg + 0x8) & 0xff; - device_mac[4] = readl(reg) & 0xff; - device_mac[5] = (readl(reg) >> 8) & 0xff; - - eth_setenv_enetaddr("usbethaddr", device_mac); - } + reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET; + + id[0] = readl(reg); + id[1] = readl(reg + 0x8); + id[2] = readl(reg + 0xC); + id[3] = readl(reg + 0x10); + usb_fake_mac_from_die_id(id); return 0; } diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 0dfb4ad..16368cb 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -193,7 +193,7 @@ int misc_init_r(void) { int phy_type; u32 auxclk, altclksrc; - uint8_t device_mac[6]; + u32 id[4]; /* EHCI is not supported on ES1.0 */ if (omap_revision() == OMAP4430_ES1_0) @@ -247,20 +247,11 @@ int misc_init_r(void) writel(altclksrc, &scrm->altclksrc); - if (!getenv("usbethaddr")) { - /* - * create a fake MAC address from the processor ID code. - * first byte is 0x02 to signify locally administered. - */ - device_mac[0] = 0x02; - device_mac[1] = readl(STD_FUSE_DIE_ID_3) & 0xff; - device_mac[2] = readl(STD_FUSE_DIE_ID_2) & 0xff; - device_mac[3] = readl(STD_FUSE_DIE_ID_1) & 0xff; - device_mac[4] = readl(STD_FUSE_DIE_ID_0) & 0xff; - device_mac[5] = (readl(STD_FUSE_DIE_ID_0) >> 8) & 0xff; - - eth_setenv_enetaddr("usbethaddr", device_mac); - } + id[0] = readl(STD_FUSE_DIE_ID_0); + id[1] = readl(STD_FUSE_DIE_ID_1); + id[2] = readl(STD_FUSE_DIE_ID_2); + id[3] = readl(STD_FUSE_DIE_ID_3); + usb_fake_mac_from_die_id(id); return 0; } -- cgit v1.1