From 805b67e1ea9a733f8fd526989b154648aca8afb6 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Sun, 8 Mar 2015 11:08:14 -0600 Subject: usb: dwc2: remove restriction on buffer length Each USB transfer is split up into chunks that are held in an aligned buffer. This imposes a limit on the size of each chunk, but no limit on the total size of transferred data. Fix the logic in chunk_msg() not to reject large transfers, but simply take the size of the aligned buffer into account when calculating the chunk size. Signed-off-by: Stephen Warren --- drivers/usb/host/dwc2.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index 05d21b7..e370d29 100644 --- a/drivers/usb/host/dwc2.c +++ b/drivers/usb/host/dwc2.c @@ -756,24 +756,18 @@ int chunk_msg(struct usb_device *dev, unsigned long pipe, int *pid, int in, debug("%s: msg: pipe %lx pid %d in %d len %d\n", __func__, pipe, *pid, in, len); - if (len > DWC2_DATA_BUF_SIZE) { - printf("%s: %d is more then available buffer size (%d)\n", - __func__, len, DWC2_DATA_BUF_SIZE); - dev->status = 0; - dev->act_len = 0; - return -EINVAL; - } - do { /* Initialize channel */ dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, in, eptype, max); xfer_len = len - done; - /* Make sure that xfer_len is a multiple of max packet size. */ if (xfer_len > CONFIG_DWC2_MAX_TRANSFER_SIZE) xfer_len = CONFIG_DWC2_MAX_TRANSFER_SIZE - max + 1; + if (xfer_len > DWC2_DATA_BUF_SIZE) + xfer_len = DWC2_DATA_BUF_SIZE - max + 1; + /* Make sure that xfer_len is a multiple of max packet size. */ if (xfer_len > 0) { num_packets = (xfer_len + max - 1) / max; if (num_packets > CONFIG_DWC2_MAX_PACKET_COUNT) { -- cgit v1.1