From 7ebf7443ad018a0647f549a835a55f0c08d7a15d Mon Sep 17 00:00:00 2001 From: wdenk Date: Sat, 2 Nov 2002 23:17:16 +0000 Subject: Initial revision --- MAKEALL | 138 ++++++++ Makefile | 656 ++++++++++++++++++++++++++++++++++++ board/cogent/README | 118 +++++++ board/cpu86/config.mk | 40 +++ board/cray/L1/config.mk | 26 ++ board/cu824/README | 453 +++++++++++++++++++++++++ board/eltec/bab7xx/bab7xx.c | 247 ++++++++++++++ board/eltec/elppc/elppc.c | 189 +++++++++++ board/ep8260/config.mk | 36 ++ board/evb64260/evb64260.c | 437 ++++++++++++++++++++++++ board/evb64260/flash.c | 805 ++++++++++++++++++++++++++++++++++++++++++++ board/evb64260/memory.c | 457 +++++++++++++++++++++++++ board/evb64260/u-boot.lds | 129 +++++++ board/gth/README | 20 ++ mkconfig | 57 ++++ 15 files changed, 3808 insertions(+) create mode 100644 MAKEALL create mode 100644 Makefile create mode 100644 board/cogent/README create mode 100644 board/cpu86/config.mk create mode 100644 board/cray/L1/config.mk create mode 100644 board/cu824/README create mode 100644 board/eltec/bab7xx/bab7xx.c create mode 100644 board/eltec/elppc/elppc.c create mode 100644 board/ep8260/config.mk create mode 100644 board/evb64260/evb64260.c create mode 100644 board/evb64260/flash.c create mode 100644 board/evb64260/memory.c create mode 100644 board/evb64260/u-boot.lds create mode 100644 board/gth/README create mode 100644 mkconfig diff --git a/MAKEALL b/MAKEALL new file mode 100644 index 0000000..e4a8151 --- /dev/null +++ b/MAKEALL @@ -0,0 +1,138 @@ +#!/bin/sh + +if [ "${CROSS_COMPILE}" ] ; then + MAKE="make CROSS_COMPILE=${CROSS_COMPILE}" +else + MAKE=make +fi + +[ -d LOG ] || mkdir LOG || exit 1 + +LIST="" + +######################################################################### +## MPC8xx Systems +######################################################################### + +LIST_8xx=" \ + ADS860 AMX860 c2mon CCM \ + cogent_mpc8xx ESTEEM192E ETX094 FADS823 \ + FADS850SAR FADS860T FLAGADM FPS850L \ + GEN860T GENIETV GTH hermes \ + IAD210 ICU862_100MHz IP860 IVML24 \ + IVML24_128 IVML24_256 IVMS8 IVMS8_128 \ + IVMS8_256 LANTEC lwmon MBX \ + MBX860T MHPC MVS1 NETVIA \ + NX823 pcu_e R360MPI RPXClassic \ + RPXlite RRvision SM850 SPD823TS \ + SXNI855T TQM823L TQM823L_LCD TQM850L \ + TQM855L TQM860L TQM860L_FEC TTTech \ +" + +######################################################################### +## PPC4xx Systems +######################################################################### + +LIST_4xx=" \ + ADCIOP AR405 CANBT CPCI405 \ + CPCI4052 CPCI440 CPCIISER4 CRAYL1 \ + DASA_SIM DU405 EBONY ERIC \ + MIP405 ML2 OCRTC ORSG \ + PCI405 PIP405 W7OLMC W7OLMG \ + WALNUT405 \ +" + +######################################################################### +## MPC824x Systems +######################################################################### + +LIST_824x=" \ + BMW CU824 MOUSSE MUSENKI \ + OXC PN62 Sandpoint8240 Sandpoint8245 \ + utx8245 \ +" + +######################################################################### +## MPC8260 Systems +######################################################################### + +LIST_8260=" \ + cogent_mpc8260 CPU86 ep8260 gw8260 \ + hymod IPHASE4539 MPC8260ADS PM826 \ + ppmc8260 RPXsuper rsdproto sacsng \ + sbc8260 SCM TQM8260 \ +" + +######################################################################### +## 74xx/7xx Systems +######################################################################### + +LIST_74xx=" \ + EVB64260 PCIPPC2 PCIPPC6 ZUMA \ +" + +LIST_7xx=" \ + BAB7xx ELPPC \ +" + +LIST_ppc="${LIST_8xx} ${LIST_824x} ${LIST_8260} \ + ${LIST_4xx} ${LIST_74xx} ${LIST_7xx}" + +######################################################################### +## StrongARM Systems +######################################################################### + +LIST_SA="lart shannon dnp1110" + +######################################################################### +## ARM7 Systems +######################################################################### + +LIST_ARM7="impa7 ep7312" + +######################################################################### +## ARM9 Systems +######################################################################### + +LIST_ARM9="smdk2400 smdk2410 trab" + +######################################################################### +## Xscale Systems +######################################################################### + +LIST_xscale="lubbock cradle csb226" + + +LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_xscale}" + + +#----- for now, just run PPC by default ----- +[ $# = 0 ] && set $LIST_ppc + +#----------------------------------------------------------------------- + +build_target() { + target=$1 + + ${MAKE} distclean >/dev/null + ${MAKE} ${target}_config + ${MAKE} all 2>&1 >LOG/$target.MAKELOG | tee LOG/$target.ERR + ${CROSS_COMPILE:-ppc_8xx-}size u-boot | tee -a LOG/$target.MAKELOG +} + +#----------------------------------------------------------------------- + + +for arg in $@ +do + case "$arg" in + 8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|xscale) + for target in `eval echo '$LIST_'${arg}` + do + build_target ${target} + done + ;; + *) build_target ${arg} + ;; + esac +done diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..6bb0071 --- /dev/null +++ b/Makefile @@ -0,0 +1,656 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +HOSTARCH := $(shell uname -m | \ + sed -e s/i.86/i386/ \ + -e s/sun4u/sparc64/ \ + -e s/arm.*/arm/ \ + -e s/sa110/arm/ \ + -e s/powerpc/ppc/ \ + -e s/macppc/ppc/) + +HOSTOS := $(shell uname -s | tr A-Z a-z | \ + sed -e 's/\(cygwin\).*/cygwin/') + +export HOSTARCH + +# Deal with colliding definitions from tcsh etc. +VENDOR= + +######################################################################### + +TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi) +export TOPDIR + +ifeq (include/config.mk,$(wildcard include/config.mk)) +# load ARCH, BOARD, and CPU configuration +include include/config.mk +export ARCH CPU BOARD VENDOR +# load other configuration +include $(TOPDIR)/config.mk + +ifndef CROSS_COMPILE +ifeq ($(HOSTARCH),ppc) +CROSS_COMPILE = +else +## #ifeq ($(CPU),mpc8xx) +## CROSS_COMPILE = ppc_8xx- +## #endif +## #ifeq ($(CPU),ppc4xx) +## #CROSS_COMPILE = ppc_4xx- +## #endif +## #ifeq ($(CPU),mpc824x) +## #CROSS_COMPILE = ppc_82xx- +## #endif +## #ifeq ($(CPU),mpc8260) +## #CROSS_COMPILE = ppc_82xx- +## #endif +## #ifeq ($(CPU),74xx_7xx) +## #CROSS_COMPILE = ppc_74xx-) +## #endif +ifeq ($(ARCH),ppc) +CROSS_COMPILE = ppc_8xx- +endif +ifeq ($(ARCH),arm) +CROSS_COMPILE = arm_920TDI- +endif +endif +endif + +export CROSS_COMPILE + +# The "tools" are needed early, so put this first +SUBDIRS = tools \ + lib_generic \ + lib_$(ARCH) \ + cpu/$(CPU) \ + board/$(BOARDDIR) \ + common \ + disk \ + fs \ + net \ + rtc \ + dtt \ + drivers \ + post \ + post/cpu \ + examples + +######################################################################### +# U-Boot objects....order is important (i.e. start must be first) + +OBJS = cpu/$(CPU)/start.o + +ifeq ($(CPU),ppc4xx) +OBJS += cpu/$(CPU)/resetvec.o +endif + +LIBS = board/$(BOARDDIR)/lib$(BOARD).a +LIBS += cpu/$(CPU)/lib$(CPU).a +LIBS += lib_$(ARCH)/lib$(ARCH).a +LIBS += fs/jffs2/libjffs2.a +LIBS += net/libnet.a +LIBS += disk/libdisk.a +LIBS += rtc/librtc.a +LIBS += dtt/libdtt.a +LIBS += drivers/libdrivers.a +LIBS += post/libpost.a post/cpu/libcpu.a +LIBS += common/libcommon.a +LIBS += lib_generic/libgeneric.a + +######################################################################### + +all: u-boot.srec u-boot.bin System.map + +install: all + cp u-boot.bin /tftpboot/u-boot.bin + cp u-boot.bin /net/sam/tftpboot/u-boot.bin + +u-boot.srec: u-boot + $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ + +u-boot.bin: u-boot + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +u-boot.dis: u-boot + $(OBJDUMP) -d $< > $@ + +u-boot: depend subdirs $(OBJS) $(LIBS) $(LDSCRIPT) + $(LD) $(LDFLAGS) $(OBJS) $(LIBS) $(LIBS) -Map u-boot.map -o u-boot + +subdirs: + @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir || exit 1 ; done + +depend dep: + @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done + +tags: + ctags -w `find $(SUBDIRS) include \ + \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` + +etags: + etags -a `find $(SUBDIRS) include \ + \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` + +System.map: u-boot + @$(NM) $< | \ + grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ + sort > System.map + +######################################################################### +else +all install u-boot u-boot.srec depend dep: + @echo "System not configured - see README" >&2 + @ exit 1 +endif + +######################################################################### + +unconfig: + rm -f include/config.h include/config.mk + +#======================================================================== +# PowerPC +#======================================================================== +######################################################################### +## MPC8xx Systems +######################################################################### + +ADS860_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx fads + +AMX860_config : unconfig + @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel + +c2mon_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx c2mon + +CCM_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens + +cogent_mpc8xx_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx cogent + +ESTEEM192E_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx esteem192e + +ETX094_config : unconfig + @./mkconfig $(@:_config=) ppc mpc8xx etx094 + +FADS823_config \ +FADS850SAR_config \ +FADS860T_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx fads + +FLAGADM_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx flagadm + +GEN860T_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx gen860t + +GENIETV_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx genietv + +GTH_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx gth + +hermes_config : unconfig + @./mkconfig $(@:_config=) ppc mpc8xx hermes + +IAD210_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens + +xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) + +ICU862_100MHz_config \ +ICU862_config: unconfig + @ >include/config.h + @[ -z "$(findstring _100MHz,$@)" ] || \ + { echo "#define CONFIG_100MHz" >>include/config.h ; \ + echo "... with 100MHz system clock" ; \ + } + @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 + +IP860_config : unconfig + @./mkconfig $(@:_config=) ppc mpc8xx ip860 + +IVML24_256_config \ +IVML24_128_config \ +IVML24_config: unconfig + @ >include/config.h + @[ -z "$(findstring IVML24_config,$@)" ] || \ + { echo "#define CONFIG_IVML24_16M" >>include/config.h ; \ + } + @[ -z "$(findstring IVML24_128_config,$@)" ] || \ + { echo "#define CONFIG_IVML24_32M" >>include/config.h ; \ + } + @[ -z "$(findstring IVML24_256_config,$@)" ] || \ + { echo "#define CONFIG_IVML24_64M" >>include/config.h ; \ + } + @./mkconfig -a IVML24 ppc mpc8xx ivm + +IVMS8_256_config \ +IVMS8_128_config \ +IVMS8_config: unconfig + @ >include/config.h + @[ -z "$(findstring IVMS8_config,$@)" ] || \ + { echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \ + } + @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ + { echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \ + } + @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ + { echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \ + } + @./mkconfig -a IVMS8 ppc mpc8xx ivm + +LANTEC_config : unconfig + @./mkconfig $(@:_config=) ppc mpc8xx lantec + +lwmon_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx lwmon + +MBX_config \ +MBX860T_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx + +MHPC_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec + +MVS1_config : unconfig + @./mkconfig $(@:_config=) ppc mpc8xx mvs1 + +NETVIA_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx netvia + +NX823_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx nx823 + +pcu_e_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens + +R360MPI_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx r360mpi + +RPXClassic_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic + +RPXlite_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx RPXlite + +RRvision_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx RRvision + +RRvision_LCD_config: unconfig + @echo "#define CONFIG_LCD" >include/config.h + @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h + @./mkconfig -a RRvision ppc mpc8xx RRvision + +SM850_config : unconfig + @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx + +SPD823TS_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx spd8xx + +SXNI855T_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx sixnet + +# Play some tricks for configuration selection +# All boards can come with 50 MHz (default), 66MHz or 80MHz clock, +# but only 855 and 860 boards may come with FEC +# and 823 boards may have LCD support +xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _LCD,,$(subst _FEC,,$(subst _config,,$1))))) + +FPS850L_config \ +TQM823L_config \ +TQM823L_66MHz_config \ +TQM823L_80MHz_config \ +TQM823L_LCD_config \ +TQM823L_LCD_66MHz_config \ +TQM823L_LCD_80MHz_config \ +TQM850L_config \ +TQM850L_66MHz_config \ +TQM850L_80MHz_config \ +TQM855L_config \ +TQM855L_66MHz_config \ +TQM855L_80MHz_config \ +TQM855L_FEC_config \ +TQM855L_FEC_66MHz_config \ +TQM855L_FEC_80MHz_config \ +TQM860L_config \ +TQM860L_66MHz_config \ +TQM860L_80MHz_config \ +TQM860L_FEC_config \ +TQM860L_FEC_66MHz_config \ +TQM860L_FEC_80MHz_config: unconfig + @ >include/config.h + @[ -z "$(findstring _FEC,$@)" ] || \ + { echo "#define CONFIG_FEC_ENET" >>include/config.h ; \ + echo "... with FEC support" ; \ + } + @[ -z "$(findstring _66MHz,$@)" ] || \ + { echo "#define CONFIG_66MHz" >>include/config.h ; \ + echo "... with 66MHz system clock" ; \ + } + @[ -z "$(findstring _80MHz,$@)" ] || \ + { echo "#define CONFIG_80MHz" >>include/config.h ; \ + echo "... with 80MHz system clock" ; \ + } + @[ -z "$(findstring _LCD,$@)" ] || \ + { echo "#define CONFIG_LCD" >>include/config.h ; \ + echo "#define CONFIG_NEC_NL6648BC20" >>include/config.h ; \ + echo "... with LCD display" ; \ + } + @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx + +TTTech_config: unconfig + @echo "#define CONFIG_LCD" >include/config.h + @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h + @./mkconfig -a TQM823L ppc mpc8xx tqm8xx + +######################################################################### +## PPC4xx Systems +######################################################################### + +ADCIOP_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx adciop esd + +AR405_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd + +CANBT_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx canbt esd + +CPCI405_config \ +CPCI4052_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd + @echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk + +CPCI440_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd + +CPCIISER4_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd + +CRAYL1_config:unconfig + @./mkconfig $(@:_config=) ppc ppc4xx L1 cray + +DASA_SIM_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd + +DU405_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx du405 esd + +EBONY_config:unconfig + @./mkconfig $(@:_config=) ppc ppc4xx ebony + +ERIC_config:unconfig + @./mkconfig $(@:_config=) ppc ppc4xx eric + +MIP405_config:unconfig + @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl + +ML2_config:unconfig + @./mkconfig $(@:_config=) ppc ppc4xx ml2 + +OCRTC_config \ +ORSG_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd + +PCI405_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd + +PIP405_config:unconfig + @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl + +W7OLMC_config \ +W7OLMG_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx w7o + +WALNUT405_config:unconfig + @./mkconfig $(@:_config=) ppc ppc4xx walnut405 + +######################################################################### +## MPC824x Systems +######################################################################### +BMW_config: unconfig + @./mkconfig $(@:_config=) ppc mpc824x bmw + +CU824_config: unconfig + @./mkconfig $(@:_config=) ppc mpc824x cu824 + +MOUSSE_config: unconfig + @./mkconfig $(@:_config=) ppc mpc824x mousse + +MUSENKI_config: unconfig + @./mkconfig $(@:_config=) ppc mpc824x musenki + +OXC_config: unconfig + @./mkconfig $(@:_config=) ppc mpc824x oxc + +PN62_config: unconfig + @./mkconfig $(@:_config=) ppc mpc824x pn62 + +Sandpoint8240_config: unconfig + @./mkconfig $(@:_config=) ppc mpc824x sandpoint + +Sandpoint8245_config: unconfig + @./mkconfig $(@:_config=) ppc mpc824x sandpoint + +utx8245_config: unconfig + @./mkconfig $(@:_config=) ppc mpc824x utx8245 + +######################################################################### +## MPC8260 Systems +######################################################################### +xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))) + +cogent_mpc8260_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 cogent + +CPU86_config \ +CPU86_ROMBOOT_config: unconfig + @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86 + @cd ./include ; \ + if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ + echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ + echo "... booting from 8-bit flash" ; \ + else \ + echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ + echo "... booting from 64-bit flash" ; \ + fi; \ + echo "export CONFIG_BOOT_ROM" >> config.mk; + +ep8260_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 ep8260 + +gw8260_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 gw8260 + +hymod_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 hymod + +IPHASE4539_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 iphase4539 + +MPC8260ADS_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 mpc8260ads + +PM826_config \ +PM826_ROMBOOT_config: unconfig + @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 pm826 + @cd ./include ; \ + if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ + echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ + echo "... booting from 8-bit flash" ; \ + else \ + echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ + echo "... booting from 64-bit flash" ; \ + fi; \ + echo "export CONFIG_BOOT_ROM" >> config.mk; \ + +ppmc8260_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260 + +RPXsuper_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper + +rsdproto_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 rsdproto + +sacsng_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 sacsng + +sbc8260_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 sbc8260 + +SCM_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens + +TQM8260_config \ +TQM8260_L2_config \ +TQM8260_266MHz_config \ +TQM8260_L2_266MHz_config \ +TQM8260_300MHz_config: unconfig + @ >include/config.h + @if [ "$(findstring _L2_,$@)" ] ; then \ + echo "#define CONFIG_L2_CACHE" >>include/config.h ; \ + echo "... with L2 Cache support (60x Bus Mode)" ; \ + else \ + echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \ + echo "... without L2 Cache support" ; \ + fi + @[ -z "$(findstring _266MHz,$@)" ] || \ + { echo "#define CONFIG_266MHz" >>include/config.h ; \ + echo "... with 266MHz system clock" ; \ + } + @[ -z "$(findstring _300MHz,$@)" ] || \ + { echo "#define CONFIG_300MHz" >>include/config.h ; \ + echo "... with 300MHz system clock" ; \ + } + @./mkconfig -a $(call xtract_82xx,$@) ppc mpc8260 tqm8260 + +######################################################################### +## 74xx/7xx Systems +######################################################################### + +EVB64260_config \ +EVB64260_750CX_config: unconfig + @./mkconfig EVB64260 ppc 74xx_7xx evb64260 + +ZUMA_config: unconfig + @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 + +PCIPPC2_config \ +PCIPPC6_config: unconfig + @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2 + +BAB7xx_config: unconfig + @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec + +ELPPC_config: unconfig + @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec + +#======================================================================== +# ARM +#======================================================================== +######################################################################### +## StrongARM Systems +######################################################################### + +lart_config : unconfig + @./mkconfig $(@:_config=) arm sa1100 lart + +dnp1110_config : unconfig + @./mkconfig $(@:_config=) arm sa1100 dnp1110 + +shannon_config : unconfig + @./mkconfig $(@:_config=) arm sa1100 shannon + +######################################################################### +## ARM920T Systems +######################################################################### + +smdk2400_config : unconfig + @./mkconfig $(@:_config=) arm arm920t smdk2400 + +smdk2410_config : unconfig + @./mkconfig $(@:_config=) arm arm920t smdk2410 + +trab_config : unconfig + @./mkconfig $(@:_config=) arm arm920t trab + +######################################################################### +## ARM720T Systems +######################################################################### + +impa7_config : unconfig + @./mkconfig $(@:_config=) arm arm720t impa7 + +ep7312_config : unconfig + @./mkconfig $(@:_config=) arm arm720t ep7312 + +######################################################################### +## Xscale Systems +######################################################################### + +lubbock_config : unconfig + @./mkconfig $(@:_config=) arm xscale lubbock + +cradle_config : unconfig + @./mkconfig $(@:_config=) arm xscale cradle + +csb226_config : unconfig + @./mkconfig $(@:_config=) arm xscale csb226 + +######################################################################### + +clean: + find . -type f \ + \( -name 'core' -o -name '*.bak' -o -name '*~' \ + -o -name '*.o' -o -name '*.a' \) -print \ + | xargs rm -f + rm -f examples/hello_world examples/timer examples/eepro100_eeprom + rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr + rm -f tools/easylogo/easylogo tools/bmp_logo + rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend + +clobber: clean + find . -type f \ + \( -name .depend -o -name '*.srec' -o -name '*.bin' \) \ + -print \ + | xargs rm -f + rm -f $(OBJS) *.bak tags TAGS + rm -fr *.*~ + rm -f u-boot u-boot.bin u-boot.elf u-boot.srec u-boot.map System.map + rm -f tools/crc32.c tools/environment.c + rm -f include/asm/arch include/asm + +mrproper \ +distclean: clobber unconfig + +backup: + F=`basename $(TOPDIR)` ; cd .. ; \ + gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F + +######################################################################### diff --git a/board/cogent/README b/board/cogent/README new file mode 100644 index 0000000..e6eef66 --- /dev/null +++ b/board/cogent/README @@ -0,0 +1,118 @@ +Cogent Modular Architecture configuration +----------------------------------------- + +As the name suggests, the Cogent platform is a modular system where +you have a motherboard into which plugs a cpu module and one or more +i/o modules. This provides very nice flexibility, but makes the +configuration task somewhat harder. + +The possible Cogent motherboards are: + +Code Config Variable Description +---- --------------- ----------- + +CMA101 CONFIG_CMA101 32MB ram, 2 ser, 1 par, rtc, dipsw, + 2x16 lcd, eth(?) +CMA102 CONFIG_CMA102 32MB ram, 2 ser, 1 par, rtc, dipsw, + 2x16 lcd +CMA111 CONFIG_CMA111 32MB ram, 1MB flash, 4 ser, 1 par, + rtc, ps/2 kbd/mse, 2x16 lcd, 2xPCI, + 10/100TP eth +CMA120 CONFIG_CMA120 32MB ram, 1MB flash, 4 ser, 1 par, + rtc, ps/2 kbd/mse, 2x16 lcd, 2xPCI, + 10/100TP eth, 2xPCMCIA, video/lcd-panel +CMA150 CONFIG_CMA150 8MB ram, 1MB flash, 2 ser, 1 par, rtc, + ps/2 kbd/mse, 2x16 lcd + +The possible Cogent PowerPC CPU modules are: + +Code Config Variable Description +---- --------------- ----------- + +CMA278-603EV CONFIG_CMA278_603EV PPC603ev CPU, 66MHz clock, 512K EPROM, + JTAG/COP +CMA278-603ER CONFIG_CMA278_603ER PPC603er CPU, 66MHz clock, 512K EPROM, + JTAG/COP +CMA278-740 CONFIG_CMA278_740 PPC740 CPU, 66MHz clock, 512K EPROM, + JTAG/COP +CMA280-509 CONFIG_CMA280_509 MPC505/509 CPU, 50MHz clock, + 512K EPROM, BDM +CMA282 CONFIG_CMA282 MPC8260 CPU, 66MHz clock, 512K EPROM, + JTAG, 16M RAM, 1 x ser (SMC2), + 1 x 10baseT PHY (SCC4), 1 x 10/100 TP + PHY (FCC1), 2 x 48pin DIN (FCC2 + TDM1) +CMA285 CONFIG_CMA285 MPC801 CPU, 33MHz clock, 512K EPROM, + BDM +CMA286-21 CONFIG_CMA286_21 MPC821 CPU, 66MHz clock, 512K EPROM, + BDM, 16M RAM, 2 x ser (SMC1 + SMC2), + 1 x 10baseT PHY (SCC2) +CMA286-60-OLD CONFIG_CMA286_60_OLD MPC860 CPU, 33MHz clock, 128K EPROM, + BDM +CMA286-60 CONFIG_CMA286_60 MPC860 CPU, 66MHz clock, 512K EPROM, + BDM, 16M RAM, 2 x ser (SMC1 + SMC2), + 1 x 10baseT PHY (SCC2) +CMA286-60P CONFIG_CMA286_60P MPC860P CPU, 66MHz clock, 512K EPROM, + BDM, 16M RAM, 2 x ser (SMC1 + SMC2), + 1 x 10baseT PHY (SCC2) +CMA287-23 CONFIG_CMA287_23 MPC823 CPU, 33MHz clock, 512K EPROM, + BDM +CMA287-50 CONFIG_CMA287_50 MPC850 CPU, 33MHz clock, 512K EPROM, + BDM + +(there are a lot of other cpu modules with ARM, MIPS and M-CORE CPUs, +but we'll worry about those later). + +The possible Cogent CMA I/O Modules are: + +Code Config Variable Description +---- --------------- ----------- + +CMA302 CONFIG_CMA302 up to 16M flash, ps/2 keyboard/mouse +CMA352 CONFIG_CMA352 CMAbus <=> PCI + +Currently supported: + + Motherboards: CMA102 + CPU Modules: CMA286-60-OLD + I/O Modules: CMA302 I/O module + +To configure, perform the usual U-Boot configuration task of editing +"include/config_cogent_mpc8xx.h" and reviewing all the options and +settings in there. In particular, check the chip select values +installed into the memory controller's various option and base +registers - these are set by the defines CFG_CMA_CSn_{BASE,SIZE} and +CFG_{B,O}Rn_PRELIM. Also be careful of the clock settings installed +into the SCCR - via the define CFG_SCCR. Finally, decide whether you +want the serial console on motherboard serial port A or on one of the +8xx SMC ports, and set CONFIG_8xx_CONS_{SMC1,SMC2,NONE} accordingly +(NONE means use Cogent motherboard serial port A). + +Then edit the file "cogent/config.mk". Firstly, set TEXT_BASE to be +the base address of the EPROM for the CPU module. This should be the +same as the value selected for CFG_MONITOR_BASE in +"include/config_cogent_*.h" (in fact, I have made this automatic via +the -DTEXT_BASE=... option in CPPFLAGS). + +Finally, set the values of the make variables $(CMA_MB) and $(CMA_IOMS). + +$(CMA_MB) is the name of the directory that contains support for your +motherboard. At this stage, only "cma10x" exists, which supports the +CMA101 and CMA102 motherboards - but only selected devices, namely +serial, lcd and dipsw. + +$(CMA_IOMS) is a list of zero or more directories that contain +support for the i/o modules you have installed. At this stage, only +"cma302" exists, which supports the CMA302 flash i/o module - but +only the flash part, not the ps/2 keyboard and mouse interfaces. + +There should be a make variable for each of the above directories, +which is the directory name with "_O" appended. This make variable is +a list of object files to compile from that directory and include in +the library. + + e.g. cma10x_O = serial.o ... + +That's it. Good Luck. + +Murray.Jensen@cmst.csiro.au +August 31, 2000. diff --git a/board/cpu86/config.mk b/board/cpu86/config.mk new file mode 100644 index 0000000..00354c4 --- /dev/null +++ b/board/cpu86/config.mk @@ -0,0 +1,40 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# CPU86 boards +# + +# This should be equal to the CFG_FLASH_BASE define in config_CPU86.h +# for the "final" configuration, with U-Boot in flash, or the address +# in RAM where U-Boot is loaded at for debugging. +# + +ifeq ($(CONFIG_BOOT_ROM),y) + TEXT_BASE := 0xFF800000 + PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM +else + TEXT_BASE := 0xFF000000 +endif + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR) diff --git a/board/cray/L1/config.mk b/board/cray/L1/config.mk new file mode 100644 index 0000000..b69fe8e --- /dev/null +++ b/board/cray/L1/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Note: I make an "image" from U-Boot itself, which prefixes 0x40 bytes of +# header info, hence start address is thus shifted. +TEXT_BASE = 0xFFFD0040 diff --git a/board/cu824/README b/board/cu824/README new file mode 100644 index 0000000..d38c48e --- /dev/null +++ b/board/cu824/README @@ -0,0 +1,453 @@ +ppcboot for a CU824 board +--------------------------- + +CU824 has two banks of flash 8MB each. In board's notation, bank 0 is +the one at the address of 0xFF800000 and bank 1 is the one at the +address of 0xFF000000. On power-up the processor jumps to the address +of 0xFFF00100, the last megabyte of the bank 0 of flash. Thus, +U-Boot is configured to reside in flash starting at the address of +0xFFF00000. The environment space is not embedded in the U-Boot code +and is located in flash separately from U-Boot, at the address of +0xFF008000. + + +U-Boot test results +-------------------- + +x.x Operation on all available serial consoles + +x.x.x CONFIG_CONS_INDEX 1 + + +ppcboot 0.9.2 (May 13 2001 - 17:56:46) + +Initializing... + CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache + Board: CU824 Revision 1 Local Bus at 99 MHz + DRAM: 64 MB + FLASH: 16 MB + In: serial + Out: serial + Err: serial + +Hit any key to stop autoboot: 0 +=> +=>he +go - start application at address 'addr' +run - run commands in an environment variable +bootm - boot application image from memory +bootp - boot image via network using BootP/TFTP protocol +tftpboot- boot image via network using TFTP protocol + and env variables ipaddr and serverip +rarpboot- boot image via network using RARP/TFTP protocol +bootd - boot default, i.e., run 'bootcmd' +loads - load S-Record file over serial line +loadb - load binary file over serial line (kermit mode) +md - memory display +mm - memory modify (auto-incrementing) +nm - memory modify (constant address) +mw - memory write (fill) +cp - memory copy +cmp - memory compare +crc32 - checksum calculation +base - print or set address offset +printenv- print environment variables +setenv - set environment variables +saveenv - save environment variables to persistent storage +protect - enable or disable FLASH write protection +erase - erase FLASH memory +flinfo - print FLASH memory information +bdinfo - print Board Info structure +iminfo - print header information for application image +coninfo - print console devices and informations +loop - infinite loop on address range +mtest - simple RAM test +icache - enable or disable instruction cache +dcache - enable or disable data cache +reset - Perform RESET of the CPU +echo - echo args to console +version - print monitor version +help - print online help +? - alias for 'help' +=> + + +x.x.x CONFIG_CONS_INDEX 2 + +**** NOT TESTED **** + +x.x Flash Driver Operation + +x.x.x Erase Operation + + +ppcboot 0.9.2 (May 13 2001 - 17:56:46) + +Initializing... + CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache + Board: CU824 Revision 1 Local Bus at 99 MHz + DRAM: 64 MB + FLASH: 16 MB + In: serial + Out: serial + Err: serial + +Hit any key to stop autoboot: 0 +=> +=> +=> +=>md ff000000 +ff000000: 27051956 70706362 6f6f7420 302e382e '..Vppcboot 0.8. +ff000010: 3320284d 61792031 31203230 3031202d 3 (May 11 2001 - +ff000020: 2031343a 35373a30 33290000 00000000 14:57:03)...... +ff000030: 00000000 00000000 00000000 00000000 ................ +ff000040: 00000000 00000000 00000000 00000000 ................ +ff000050: 00000000 00000000 00000000 00000000 ................ +ff000060: 00000000 00000000 00000000 00000000 ................ +ff000070: 00000000 00000000 00000000 00000000 ................ +ff000080: 00000000 00000000 00000000 00000000 ................ +ff000090: 00000000 00000000 00000000 00000000 ................ +ff0000a0: 00000000 00000000 00000000 00000000 ................ +ff0000b0: 00000000 00000000 00000000 00000000 ................ +ff0000c0: 00000000 00000000 00000000 00000000 ................ +ff0000d0: 00000000 00000000 00000000 00000000 ................ +ff0000e0: 00000000 00000000 00000000 00000000 ................ +ff0000f0: 00000000 00000000 00000000 00000000 ................ +=>erase ff000000 ff007fff +Erase Flash from 0xff000000 to 0xff007fff + done +Erased 1 sectors +=>md ff000000 +ff000000: ffffffff ffffffff ffffffff ffffffff ................ +ff000010: ffffffff ffffffff ffffffff ffffffff ................ +ff000020: ffffffff ffffffff ffffffff ffffffff ................ +ff000030: ffffffff ffffffff ffffffff ffffffff ................ +ff000040: ffffffff ffffffff ffffffff ffffffff ................ +ff000050: ffffffff ffffffff ffffffff ffffffff ................ +ff000060: ffffffff ffffffff ffffffff ffffffff ................ +ff000070: ffffffff ffffffff ffffffff ffffffff ................ +ff000080: ffffffff ffffffff ffffffff ffffffff ................ +ff000090: ffffffff ffffffff ffffffff ffffffff ................ +ff0000a0: ffffffff ffffffff ffffffff ffffffff ................ +ff0000b0: ffffffff ffffffff ffffffff ffffffff ................ +ff0000c0: ffffffff ffffffff ffffffff ffffffff ................ +ff0000d0: ffffffff ffffffff ffffffff ffffffff ................ +ff0000e0: ffffffff ffffffff ffffffff ffffffff ................ +ff0000f0: ffffffff ffffffff ffffffff ffffffff ................ +=> + +x.x.x Information + + +ppcboot 0.9.2 (May 13 2001 - 17:56:46) + +Initializing... + CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache + Board: CU824 Revision 1 Local Bus at 99 MHz + DRAM: 64 MB + FLASH: 16 MB + In: serial + Out: serial + Err: serial + +Hit any key to stop autoboot: 0 +=> +=> +=> +=> +=>flinfo + +Bank # 1: Intel: 28F160F3B (16Mbit) + Size: 8 MB in 39 Sectors + Sector Start Addresses: + FF000000 FF008000 (RO) FF010000 FF018000 FF020000 + FF028000 FF030000 FF038000 FF040000 FF080000 + FF0C0000 FF100000 FF140000 FF180000 FF1C0000 + FF200000 FF240000 FF280000 FF2C0000 FF300000 + FF340000 FF380000 FF3C0000 FF400000 FF440000 + FF480000 FF4C0000 FF500000 FF540000 FF580000 + FF5C0000 FF600000 FF640000 FF680000 FF6C0000 + FF700000 FF740000 FF780000 FF7C0000 + +Bank # 2: Intel: 28F160F3B (16Mbit) + Size: 8 MB in 39 Sectors + Sector Start Addresses: + FF800000 FF808000 FF810000 FF818000 FF820000 + FF828000 FF830000 FF838000 FF840000 FF880000 + FF8C0000 FF900000 FF940000 FF980000 FF9C0000 + FFA00000 FFA40000 FFA80000 FFAC0000 FFB00000 + FFB40000 FFB80000 FFBC0000 FFC00000 FFC40000 + FFC80000 FFCC0000 FFD00000 FFD40000 FFD80000 + FFDC0000 FFE00000 FFE40000 FFE80000 FFEC0000 + FFF00000 (RO) FFF40000 FFF80000 FFFC0000 +=> + +x.x.x Flash Programming + + +ppcboot 0.9.2 (May 13 2001 - 17:56:46) + +Initializing... + CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache + Board: CU824 Revision 1 Local Bus at 99 MHz + DRAM: 64 MB + FLASH: 16 MB + In: serial + Out: serial + Err: serial + +Hit any key to stop autoboot: 0 +=> +=> +=> +=> +=>cp 0 ff000000 20 +Copy to Flash... done +=>md 0 +00000000: 0ec08ce0 03f9800c 00000001 040c0000 ................ +00000010: 00000001 03fd1aa0 03fd1ae4 03fd1a00 ................ +00000020: 03fd1a58 03fceb04 03fd34cc 03fd34d0 ...X......4...4. +00000030: 03fcd5bc 03fcdabc 00000000 00000000 ................ +00000040: 00000000 00000000 00000000 00000000 ................ +00000050: 00000000 00000000 00000000 00000000 ................ +00000060: 00000000 00000000 00000000 00000000 ................ +00000070: 00000000 00000000 00000000 00000000 ................ +00000080: 00000000 00000000 00000000 00000000 ................ +00000090: 00000000 00000000 00000000 00000000 ................ +000000a0: 00000000 00000000 00000000 00000000 ................ +000000b0: 00000000 00000000 00000000 00000000 ................ +000000c0: 00000000 00000000 00000000 00000000 ................ +000000d0: 00000000 00000000 00000000 00000000 ................ +000000e0: 00000000 00000000 00000000 00000000 ................ +000000f0: 00000000 00000000 00000000 00000000 ................ +=>md ff000000 +ff000000: 0ec08ce0 03f9800c 00000001 040c0000 ................ +ff000010: 00000001 03fd1aa0 03fd1ae4 03fd1a00 ................ +ff000020: 03fd1a58 03fceb04 03fd34cc 03fd34d0 ...X......4...4. +ff000030: 03fcd5bc 03fcdabc 00000000 00000000 ................ +ff000040: 00000000 00000000 00000000 00000000 ................ +ff000050: 00000000 00000000 00000000 00000000 ................ +ff000060: 00000000 00000000 00000000 00000000 ................ +ff000070: 00000000 00000000 00000000 00000000 ................ +ff000080: ffffffff ffffffff ffffffff ffffffff ................ +ff000090: ffffffff ffffffff ffffffff ffffffff ................ +ff0000a0: ffffffff ffffffff ffffffff ffffffff ................ +ff0000b0: ffffffff ffffffff ffffffff ffffffff ................ +ff0000c0: ffffffff ffffffff ffffffff ffffffff ................ +ff0000d0: ffffffff ffffffff ffffffff ffffffff ................ +ff0000e0: ffffffff ffffffff ffffffff ffffffff ................ +ff0000f0: ffffffff ffffffff ffffffff ffffffff ................ +=> + +x.x.x Storage of environment variables in flash + + +ppcboot 0.9.2 (May 13 2001 - 17:56:46) + +Initializing... + CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache + Board: CU824 Revision 1 Local Bus at 99 MHz + DRAM: 64 MB + FLASH: 16 MB + In: serial + Out: serial + Err: serial + +Hit any key to stop autoboot: 0 +=> +=>printenv +bootargs= +bootcmd=bootm FE020000 +bootdelay=5 +baudrate=9600 +ipaddr=192.168.4.2 +serverip=192.168.4.1 +ethaddr=00:40:42:01:00:a0 +stdin=serial +stdout=serial +stderr=serial + +Environment size: 167/32764 bytes +=>setenv myvar 1234 +=>save_env +Un-Protected 1 sectors +Erasing Flash... + done +Erased 1 sectors +Saving Environment to Flash... +Protected 1 sectors +=>reset + + +ppcboot 0.9.2 (May 13 2001 - 17:56:46) + +Initializing... + CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache + Board: CU824 Revision 1 Local Bus at 99 MHz + DRAM: 64 MB + FLASH: 16 MB + In: serial + Out: serial + Err: serial + +Hit any key to stop autoboot: 0 +=> +=>printenv +bootargs= +bootcmd=bootm FE020000 +bootdelay=5 +baudrate=9600 +ipaddr=192.168.4.2 +serverip=192.168.4.1 +ethaddr=00:40:42:01:00:a0 +myvar=1234 +stdin=serial +stdout=serial +stderr=serial + +Environment size: 178/32764 bytes +=> + +x.x Image Download and run over serial port + + +ppcboot 0.9.2 (May 13 2001 - 17:56:46) + +Initializing... + CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache + Board: CU824 Revision 1 Local Bus at 99 MHz + DRAM: 64 MB + FLASH: 16 MB + In: serial + Out: serial + Err: serial + +Hit any key to stop autoboot: 0 +=> +=> +=>mw 40000 0 10000 +=>md 40000 +00040000: 00000000 00000000 00000000 00000000 ................ +00040010: 00000000 00000000 00000000 00000000 ................ +00040020: 00000000 00000000 00000000 00000000 ................ +00040030: 00000000 00000000 00000000 00000000 ................ +00040040: 00000000 00000000 00000000 00000000 ................ +00040050: 00000000 00000000 00000000 00000000 ................ +00040060: 00000000 00000000 00000000 00000000 ................ +00040070: 00000000 00000000 00000000 00000000 ................ +00040080: 00000000 00000000 00000000 00000000 ................ +00040090: 00000000 00000000 00000000 00000000 ................ +000400a0: 00000000 00000000 00000000 00000000 ................ +000400b0: 00000000 00000000 00000000 00000000 ................ +000400c0: 00000000 00000000 00000000 00000000 ................ +000400d0: 00000000 00000000 00000000 00000000 ................ +000400e0: 00000000 00000000 00000000 00000000 ................ +000400f0: 00000000 00000000 00000000 00000000 ................ +=>loads +## Ready for S-Record download ... + +(Back at xpert.denx.de) +[vlad@xpert vlad]$ cat hello_world.srec >/dev/ttyS0 +[vlad@xpert vlad]$ kermit -l /dev/ttyS0 -b 9600 -c +Connecting to /dev/ttyS0, speed 9600. +The escape character is Ctrl-\ (ASCII 28, FS) +Type the escape character followed by C to get back, +or followed by ? to see other options. +md 40000 +00040000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a.. +00040010: 90010024 48000005 7fc802a6 801effe8 ...$H........... +00040020: 7fc0f214 7c7f1b78 813f0038 7c9c2378 ....|..x.?.8|.#x +00040030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`.. +00040040: 7c0803a6 4e800021 813f0038 7f84e378 |...N..!.?.8...x +00040050: 807e8004 80090010 7c0803a6 4e800021 .~......|...N..! +00040060: 7c1be000 4181003c 80bd0000 813f0038 |...A..<.....?.8 +00040070: 3bbd0004 2c050000 40820008 80be8008 ;...,...@....... +00040080: 80090010 7f64db78 807e800c 3b7b0001 .....d.x.~..;{.. +00040090: 7c0803a6 4e800021 7c1be000 4081ffcc |...N..!|...@... +000400a0: 813f0038 807e8010 80090010 7c0803a6 .?.8.~......|... +000400b0: 4e800021 813f0038 80090004 7c0803a6 N..!.?.8....|... +000400c0: 4e800021 2c030000 4182ffec 813f0038 N..!,...A....?.8 +000400d0: 80090000 7c0803a6 4e800021 813f0038 ....|...N..!.?.8 +000400e0: 807e8014 80090010 7c0803a6 4e800021 .~......|...N..! +000400f0: 38600000 80010024 7c0803a6 bb61000c 8`.....$|....a.. +=>go 40004 +## Starting application at 0x00040004 ... +Hello World +argc = 1 +argv[0] = "40004" +argv[1] = "" +Hit any key to exit ... + +## Application terminated, rc = 0x0 +=> + +x.x Image download and run over ethernet interface + + +ppcboot 0.9.2 (May 13 2001 - 17:56:46) + +Initializing... + CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache + Board: CU824 Revision 1 Local Bus at 99 MHz + DRAM: 64 MB + FLASH: 16 MB + In: serial + Out: serial + Err: serial + +Hit any key to stop autoboot: 0 +=> +=> +=>mw 40000 0 10000 +=>md 40000 +00040000: 00000000 00000000 00000000 00000000 ................ +00040010: 00000000 00000000 00000000 00000000 ................ +00040020: 00000000 00000000 00000000 00000000 ................ +00040030: 00000000 00000000 00000000 00000000 ................ +00040040: 00000000 00000000 00000000 00000000 ................ +00040050: 00000000 00000000 00000000 00000000 ................ +00040060: 00000000 00000000 00000000 00000000 ................ +00040070: 00000000 00000000 00000000 00000000 ................ +00040080: 00000000 00000000 00000000 00000000 ................ +00040090: 00000000 00000000 00000000 00000000 ................ +000400a0: 00000000 00000000 00000000 00000000 ................ +000400b0: 00000000 00000000 00000000 00000000 ................ +000400c0: 00000000 00000000 00000000 00000000 ................ +000400d0: 00000000 00000000 00000000 00000000 ................ +000400e0: 00000000 00000000 00000000 00000000 ................ +000400f0: 00000000 00000000 00000000 00000000 ................ +=>tftpboot 40000 hello_world.bin +ARP broadcast 1 +TFTP from server 192.168.4.1; our IP address is 192.168.4.2 +Filename 'hello_world.bin'. +Load address: 0x40000 +Loading: ############# +done +Bytes transferred = 65912 (10178 hex) +=>md 40000 +00040000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a.. +00040010: 90010024 48000005 7fc802a6 801effe8 ...$H........... +00040020: 7fc0f214 7c7f1b78 813f0038 7c9c2378 ....|..x.?.8|.#x +00040030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`.. +00040040: 7c0803a6 4e800021 813f0038 7f84e378 |...N..!.?.8...x +00040050: 807e8004 80090010 7c0803a6 4e800021 .~......|...N..! +00040060: 7c1be000 4181003c 80bd0000 813f0038 |...A..<.....?.8 +00040070: 3bbd0004 2c050000 40820008 80be8008 ;...,...@....... +00040080: 80090010 7f64db78 807e800c 3b7b0001 .....d.x.~..;{.. +00040090: 7c0803a6 4e800021 7c1be000 4081ffcc |...N..!|...@... +000400a0: 813f0038 807e8010 80090010 7c0803a6 .?.8.~......|... +000400b0: 4e800021 813f0038 80090004 7c0803a6 N..!.?.8....|... +000400c0: 4e800021 2c030000 4182ffec 813f0038 N..!,...A....?.8 +000400d0: 80090000 7c0803a6 4e800021 813f0038 ....|...N..!.?.8 +000400e0: 807e8014 80090010 7c0803a6 4e800021 .~......|...N..! +000400f0: 38600000 80010024 7c0803a6 bb61000c 8`.....$|....a.. +=>go 40004 +## Starting application at 0x00040004 ... +Hello World +argc = 1 +argv[0] = "40004" +argv[1] = "" +Hit any key to exit ... + +## Application terminated, rc = 0x0 +=> diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c new file mode 100644 index 0000000..6f6f977 --- /dev/null +++ b/board/eltec/bab7xx/bab7xx.c @@ -0,0 +1,247 @@ +/* + * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH + * Andreas Heppel + * (C) Copyright 2001 ELTEC Elektronik AG + * Frank Gottschling + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include <74xx_7xx.h> +#include +#include + +/*---------------------------------------------------------------------------*/ +/* + * Get Bus clock frequency + */ +ulong bab7xx_get_bus_freq (void) +{ + /* + * The GPIO Port 1 on BAB7xx reflects the bus speed. + */ + volatile struct GPIO *gpio = (struct GPIO *)(CFG_ISA_IO + CFG_NS87308_GPIO_BASE); + + unsigned char data = gpio->dta1; + + if (data & 0x02) + return 66666666; + + return 83333333; +} + +/*---------------------------------------------------------------------------*/ + +/* + * Measure CPU clock speed (core clock GCLK1) (Approx. GCLK frequency in Hz) + */ +ulong bab7xx_get_gclk_freq (void) +{ + static const int pllratio_to_factor[] = { + 00, 75, 70, 00, 20, 65, 100, 45, 30, 55, 40, 50, 80, 60, 35, 00, + }; + + return pllratio_to_factor[get_hid1 () >> 28] * (bab7xx_get_bus_freq() / 10); +} + +/*----------------------------------------------------------------------------*/ + +int checkcpu (void) +{ + uint pvr = get_pvr(); + + printf ("MPC7xx V%d.%d",(pvr >> 8) & 0xFF, pvr & 0xFF); + printf (" at %ld / %ld MHz\n", bab7xx_get_gclk_freq()/1000000, + bab7xx_get_bus_freq()/1000000); + + return (0); +} + +/* ------------------------------------------------------------------------- */ + +int checkboard (void) +{ +#ifdef CFG_ADDRESS_MAP_A + puts ("Board: ELTEC BAB7xx PReP\n"); +#else + puts ("Board: ELTEC BAB7xx CHRP\n"); +#endif + return (0); +} + +/* ------------------------------------------------------------------------- */ + +int checkflash (void) +{ + /* TODO: XXX XXX XXX */ + printf ("2 MB ## Test not implemented yet ##\n"); + return (0); +} + +/* ------------------------------------------------------------------------- */ + + +static unsigned int mpc106_read_cfg_dword (unsigned int reg) +{ + unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC); + + out32r(MPC106_REG_ADDR, reg_addr); + + return (in32r(MPC106_REG_DATA | (reg & 0x3))); +} + +/* ------------------------------------------------------------------------- */ + +long int dram_size (int board_type) +{ + /* No actual initialisation to do - done when setting up + * PICRs MCCRs ME/SARs etc in ram_init.S. + */ + + register unsigned long i, msar1, mear1, memSize; + +#if defined(CFG_MEMTEST) + register unsigned long reg; + + printf("Testing DRAM\n"); + + /* write each mem addr with it's address */ + for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4) + *reg = reg; + + for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4) + { + if (*reg != reg) + return -1; + } +#endif + + /* + * Since MPC106 memory controller chip has already been set to + * control all memory, just read and interpret its memory boundery register. + */ + memSize = 0; + msar1 = mpc106_read_cfg_dword(MPC106_MSAR1); + mear1 = mpc106_read_cfg_dword(MPC106_MEAR1); + i = mpc106_read_cfg_dword(MPC106_MBER) & 0xf; + + do + { + if (i & 0x01) /* is bank enabled ? */ + memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1; + msar1 >>= 8; + mear1 >>= 8; + i >>= 1; + } while (i); + + return (memSize * 0x100000); +} + +/* ------------------------------------------------------------------------- */ + +long int initdram(int board_type) +{ + return dram_size(board_type); +} + +/* ------------------------------------------------------------------------- */ + +void after_reloc (ulong dest_addr) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* + * Jump to the main U-Boot board init code + */ + board_init_r(gd, dest_addr); +} + +/* ------------------------------------------------------------------------- */ + +/* + * do_reset is done here because in this case it is board specific, since the + * 7xx CPUs can only be reset by external HW (the RTC in this case). + */ +void +do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +{ +#if defined(CONFIG_RTC_MK48T59) + /* trigger watchdog immediately */ + rtc_set_watchdog(1, RTC_WD_RB_16TH); +#else + #error "You must define the macro CONFIG_RTC_MK48T59." +#endif +} + +/* ------------------------------------------------------------------------- */ + +#if defined(CONFIG_WATCHDOG) +/* + * Since the 7xx CPUs don't have an internal watchdog, this function is + * board specific. We use the RTC here. + */ +void watchdog_reset(void) +{ +#if defined(CONFIG_RTC_MK48T59) + /* we use a 32 sec watchdog timer */ + rtc_set_watchdog(8, RTC_WD_RB_4); +#else + #error "You must define the macro CONFIG_RTC_MK48T59." +#endif +} +#endif /* CONFIG_WATCHDOG */ + +/* ------------------------------------------------------------------------- */ + +#ifdef CONFIG_CONSOLE_EXTRA_INFO +extern GraphicDevice smi; + +void video_get_info_str (int line_number, char *info) +{ + /* init video info strings for graphic console */ + switch (line_number) + { + case 1: + sprintf (info," MPC7xx V%d.%d at %ld / %ld MHz", + (get_pvr() >> 8) & 0xFF, + get_pvr() & 0xFF, + bab7xx_get_gclk_freq()/1000000, + bab7xx_get_bus_freq()/1000000); + return; + case 2: + sprintf (info, " ELTEC BAB7xx with %ld MB DRAM and %ld MB FLASH", + dram_size(0)/0x100000, + flash_init()/0x100000); + return; + case 3: + sprintf (info, " %s", smi.modeIdent); + return; + } + + /* no more info lines */ + *info = 0; + return; +} +#endif + +/*---------------------------------------------------------------------------*/ diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c new file mode 100644 index 0000000..97b70a4 --- /dev/null +++ b/board/eltec/elppc/elppc.c @@ -0,0 +1,189 @@ +/* + * (C) Copyright 2002 ELTEC Elektronik AG + * Frank Gottschling + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +/* ------------------------------------------------------------------------- */ + +int checkboard (void) +{ + puts ("Board: ELTEC PowerPC\n"); + return (0); +} + +/* ------------------------------------------------------------------------- */ + +int checkflash (void) +{ + /* TODO */ + printf ("Test not implemented !\n"); + return (0); +} + +/* ------------------------------------------------------------------------- */ + +static unsigned int mpc106_read_cfg_dword (unsigned int reg) +{ + unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC); + + out32r(MPC106_REG_ADDR, reg_addr); + + return (in32r(MPC106_REG_DATA | (reg & 0x3))); +} + +/* ------------------------------------------------------------------------- */ + +long int dram_size (int board_type) +{ + /* + * No actual initialisation to do - done when setting up + * PICRs MCCRs ME/SARs etc in asm_init.S. + */ + + register unsigned long i, msar1, mear1, memSize; + +#if defined(CFG_MEMTEST) + register unsigned long reg; + + printf("Testing DRAM\n"); + + /* write each mem addr with it's address */ + for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4) + *reg = reg; + + for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4) + { + if (*reg != reg) + return -1; + } +#endif + + /* + * Since MPC107 memory controller chip has already been set to + * control all memory, just read and interpret its memory boundery register. + */ + memSize = 0; + msar1 = mpc106_read_cfg_dword(MPC106_MSAR1); + mear1 = mpc106_read_cfg_dword(MPC106_MEAR1); + i = mpc106_read_cfg_dword(MPC106_MBER) & 0xf; + + do + { + if (i & 0x01) /* is bank enabled ? */ + memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1; + msar1 >>= 8; + mear1 >>= 8; + i >>= 1; + } while (i); + + return (memSize * 0x100000); +} +/* ------------------------------------------------------------------------- */ + +long int initdram(int board_type) +{ + return dram_size(board_type); +} + +/* ------------------------------------------------------------------------- */ + +/* + * The BAB 911 can be reset by writing bit 0 of the Processor Initialization + * Register PI in the MPC 107 (at offset 0x41090 of the Embedded Utilities + * Memory Block). + */ +void do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +{ + out8(MPC107_EUMB_PI, 1); +} + +/* ------------------------------------------------------------------------- */ + +#if defined(CONFIG_WATCHDOG) + +/* + * Since the 7xx CPUs don't have an internal watchdog, this function is + * board specific. + */ +void watchdog_reset(void) +{ +} +#endif /* CONFIG_WATCHDOG */ + +/* ------------------------------------------------------------------------- */ + +void after_reloc (ulong dest_addr) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* + * Jump to the main U-Boot board init code + */ + board_init_r(gd, dest_addr); +} + +/* ------------------------------------------------------------------------- */ + +#ifdef CONFIG_CONSOLE_EXTRA_INFO +extern GraphicDevice smi; + +void video_get_info_str (int line_number, char *info) +{ + /* init video info strings for graphic console */ + switch (line_number) + { + case 1: + sprintf (info," MPC7xx V%d.%d at %d / %d MHz", + (get_pvr() >> 8) & 0xFF, + get_pvr() & 0xFF, + 400, + 100); + return; + case 2: + sprintf (info, " ELTEC ELPPC with %ld MB DRAM and %ld MB FLASH", + dram_size(0)/0x100000, + flash_init()/0x100000); + return; + case 3: + sprintf (info, " %s", smi.modeIdent); + return; + } + + /* no more info lines */ + *info = 0; + return; +} +#endif + + + + + + + + + + diff --git a/board/ep8260/config.mk b/board/ep8260/config.mk new file mode 100644 index 0000000..eaf1560 --- /dev/null +++ b/board/ep8260/config.mk @@ -0,0 +1,36 @@ +# +# (C) Copyright 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# EP8260 boards +# + +# This should be equal to the CFG_FLASH_BASE define in config_ep8260.h +# for the "final" configuration, with U-Boot in flash, or the address +# in RAM where U-Boot is loaded at for debugging. +# +#TEXT_BASE = 0x00100000 +#TEXT_BASE = 0xFF000000 +TEXT_BASE = 0xFFF00000 + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR) diff --git a/board/evb64260/evb64260.c b/board/evb64260/evb64260.c new file mode 100644 index 0000000..1c02e32 --- /dev/null +++ b/board/evb64260/evb64260.c @@ -0,0 +1,437 @@ +/* + * (C) Copyright 2001 + * Josh Huber , Mission Critical Linux, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * evb64260.c - main board support/init for the Galileo Eval board. + */ + +#include +#include <74xx_7xx.h> +#include +#include +#include +#include + +#include +#include "eth.h" +#include "mpsc.h" +#include "i2c.h" +#include "64260.h" +#ifdef CONFIG_ZUMA_V2 +extern void zuma_mbox_init(void); +#endif + +#undef DEBUG +#define MAP_PCI + +#ifdef DEBUG +#define DP(x) x +#else +#define DP(x) +#endif + +/* ------------------------------------------------------------------------- */ + +/* this is the current GT register space location */ +/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */ + +/* Unfortunately, we cant change it while we are in flash, so we initialize it + * to the "final" value. This means that any debug_led calls before + * board_pre_init wont work right (like in cpu_init_f). + * See also my_remap_gt_regs below. (NTL) + */ + +unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS; + +/* ------------------------------------------------------------------------- */ + +/* + * This is a version of the GT register space remapping function that + * doesn't touch globals (meaning, it's ok to run from flash.) + * + * Unfortunately, this has the side effect that a writable + * INTERNAL_REG_BASE_ADDR is impossible. Oh well. + */ + +void +my_remap_gt_regs(u32 cur_loc, u32 new_loc) +{ + u32 temp; + + /* check and see if it's already moved */ + temp = in_le32((u32 *)(new_loc + INTERNAL_SPACE_DECODE)); + if ((temp & 0xffff) == new_loc >> 20) + return; + + temp = (in_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE)) & + 0xffff0000) | (new_loc >> 20); + + out_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE), temp); + + while (GTREGREAD(INTERNAL_SPACE_DECODE) != temp); +} + +static void +gt_pci_config(void) +{ + /* move PCI stuff out of the way - NTL */ + /* map PCI Host 0 */ + pciMapSpace(PCI_HOST0, PCI_REGION0, CFG_PCI0_0_MEM_SPACE, + CFG_PCI0_0_MEM_SPACE, CFG_PCI0_MEM_SIZE); + + pciMapSpace(PCI_HOST0, PCI_REGION1, 0, 0, 0); + pciMapSpace(PCI_HOST0, PCI_REGION2, 0, 0, 0); + pciMapSpace(PCI_HOST0, PCI_REGION3, 0, 0, 0); + + pciMapSpace(PCI_HOST0, PCI_IO, CFG_PCI0_IO_SPACE_PCI, + CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE); + + /* map PCI Host 1 */ + pciMapSpace(PCI_HOST1, PCI_REGION0, CFG_PCI1_0_MEM_SPACE, + CFG_PCI1_0_MEM_SPACE, CFG_PCI1_MEM_SIZE); + + pciMapSpace(PCI_HOST1, PCI_REGION1, 0, 0, 0); + pciMapSpace(PCI_HOST1, PCI_REGION2, 0, 0, 0); + pciMapSpace(PCI_HOST1, PCI_REGION3, 0, 0, 0); + + pciMapSpace(PCI_HOST1, PCI_IO, CFG_PCI1_IO_SPACE_PCI, + CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE); + + /* PCI interface settings */ + GT_REG_WRITE(PCI_0TIMEOUT_RETRY, 0xffff); + GT_REG_WRITE(PCI_1TIMEOUT_RETRY, 0xffff); + GT_REG_WRITE(PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffff80e); + GT_REG_WRITE(PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffff80e); + + +} + +/* Setup CPU interface paramaters */ +static void +gt_cpu_config(void) +{ + cpu_t cpu = get_cpu_type(); + ulong tmp; + + /* cpu configuration register */ + tmp = GTREGREAD(CPU_CONFIGURATION); + + /* set the AACK delay bit + * see Res#14 */ + tmp |= CPU_CONF_AACK_DELAY; + tmp &= ~CPU_CONF_AACK_DELAY_2; /* New RGF */ + + /* Galileo claims this is necessary for all busses >= 100 MHz */ + tmp |= CPU_CONF_FAST_CLK; + + if (cpu == CPU_750CX) { + tmp &= ~CPU_CONF_DP_VALID; /* Safer, needed for CXe. RGF */ + tmp &= ~CPU_CONF_AP_VALID; + } else { + tmp |= CPU_CONF_DP_VALID; + tmp |= CPU_CONF_AP_VALID; + } + + /* this only works with the MPX bus */ + tmp &= ~CPU_CONF_RD_OOO; /* Safer RGF */ + tmp |= CPU_CONF_PIPELINE; + tmp |= CPU_CONF_TA_DELAY; + + GT_REG_WRITE(CPU_CONFIGURATION, tmp); + + /* CPU master control register */ + tmp = GTREGREAD(CPU_MASTER_CONTROL); + + tmp |= CPU_MAST_CTL_ARB_EN; + + if ((cpu == CPU_7400) || + (cpu == CPU_7410) || + (cpu == CPU_7450)) { + + tmp |= CPU_MAST_CTL_CLEAN_BLK; + tmp |= CPU_MAST_CTL_FLUSH_BLK; + + } else { + /* cleanblock must be cleared for CPUs + * that do not support this command + * see Res#1 */ + tmp &= ~CPU_MAST_CTL_CLEAN_BLK; + tmp &= ~CPU_MAST_CTL_FLUSH_BLK; + } + GT_REG_WRITE(CPU_MASTER_CONTROL, tmp); +} + +/* + * board_pre_init. + * + * set up gal. device mappings, etc. + */ +int board_pre_init (void) +{ + uchar sram_boot = 0; + + /* + * set up the GT the way the kernel wants it + * the call to move the GT register space will obviously + * fail if it has already been done, but we're going to assume + * that if it's not at the power-on location, it's where we put + * it last time. (huber) + */ + my_remap_gt_regs(CFG_DFL_GT_REGS, CFG_GT_REGS); + + gt_pci_config(); + + /* mask all external interrupt sources */ + GT_REG_WRITE(CPU_INTERRUPT_MASK_REGISTER_LOW, 0); + GT_REG_WRITE(CPU_INTERRUPT_MASK_REGISTER_HIGH, 0); + GT_REG_WRITE(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0); + GT_REG_WRITE(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0); + GT_REG_WRITE(PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0); + GT_REG_WRITE(PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0); + GT_REG_WRITE(CPU_INT_0_MASK, 0); + GT_REG_WRITE(CPU_INT_1_MASK, 0); + GT_REG_WRITE(CPU_INT_2_MASK, 0); + GT_REG_WRITE(CPU_INT_3_MASK, 0); + + /* now, onto the configuration */ + GT_REG_WRITE(SDRAM_CONFIGURATION, CFG_SDRAM_CONFIG); + + /* ----- DEVICE BUS SETTINGS ------ */ + + /* + * EVB + * 0 - SRAM + * 1 - RTC + * 2 - UART + * 3 - Flash + * boot - BootCS + * + * Zuma + * 0 - Flash + * boot - BootCS + */ + + /* + * the dual 7450 module requires burst access to the boot + * device, so the serial rom copies the boot device to the + * on-board sram on the eval board, and updates the correct + * registers to boot from the sram. (device0) + */ +#ifdef CONFIG_ZUMA_V2 + /* Zuma has no SRAM */ + sram_boot = 0; +#else + if (memoryGetDeviceBaseAddress(DEVICE0) && 0xfff00000 == CFG_MONITOR_BASE) + sram_boot = 1; +#endif + + if (!sram_boot) + memoryMapDeviceSpace(DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE); + + memoryMapDeviceSpace(DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE); + memoryMapDeviceSpace(DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE); + memoryMapDeviceSpace(DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE); + + /* configure device timing */ +#ifdef CFG_DEV0_PAR + if (!sram_boot) + GT_REG_WRITE(DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR); +#endif + +#ifdef CFG_DEV1_PAR + GT_REG_WRITE(DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR); +#endif +#ifdef CFG_DEV2_PAR + GT_REG_WRITE(DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR); +#endif + +#ifdef CFG_32BIT_BOOT_PAR + /* detect if we are booting from the 32 bit flash */ + if (GTREGREAD(DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) { + /* 32 bit boot flash */ + GT_REG_WRITE(DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR); + GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_32BIT_BOOT_PAR); + } else { + /* 8 bit boot flash */ + GT_REG_WRITE(DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR); + GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR); + } +#else + /* 8 bit boot flash only */ + GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR); +#endif + + gt_cpu_config(); + + /* MPP setup */ + GT_REG_WRITE(MPP_CONTROL0, CFG_MPP_CONTROL_0); + GT_REG_WRITE(MPP_CONTROL1, CFG_MPP_CONTROL_1); + GT_REG_WRITE(MPP_CONTROL2, CFG_MPP_CONTROL_2); + GT_REG_WRITE(MPP_CONTROL3, CFG_MPP_CONTROL_3); + + GT_REG_WRITE(GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL); + GT_REG_WRITE(SERIAL_PORT_MULTIPLEX, CFG_SERIAL_PORT_MUX); + + return 0; +} + +/* various things to do after relocation */ + +int misc_init_r (void) +{ + icache_enable(); +#ifdef CFG_L2 + l2cache_enable(); +#endif + +#ifdef CONFIG_MPSC + mpsc_init2(); +#endif + +#ifdef CONFIG_ZUMA_V2 + zuma_mbox_init(); +#endif + return (0); +} + +void +after_reloc(gd_t *gd, ulong dest_addr) +{ + /* check to see if we booted from the sram. If so, move things + * back to the way they should be. (we're running from main + * memory at this point now */ + + if (memoryGetDeviceBaseAddress(DEVICE0) == CFG_MONITOR_BASE) { + memoryMapDeviceSpace(DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE); + memoryMapDeviceSpace(BOOT_DEVICE, CFG_FLASH_BASE, _1M); + } + + /* now, jump to the main U-Boot board init code */ + board_init_r (gd, dest_addr); + + /* NOTREACHED */ +} + +/* ------------------------------------------------------------------------- */ + +/* + * Check Board Identity: + */ + +int +checkboard (void) +{ + puts ("Board: " CFG_BOARD_NAME "\n"); + return (0); +} + +/* utility functions */ +void +debug_led(int led, int mode) +{ +#ifndef CONFIG_ZUMA_V2 + volatile int *addr = NULL; + int dummy; + + if (mode == 1) { + switch (led) { + case 0: + addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x08000); + break; + + case 1: + addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x0c000); + break; + + case 2: + addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x10000); + break; + } + } else if (mode == 0) { + switch (led) { + case 0: + addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x14000); + break; + + case 1: + addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x18000); + break; + + case 2: + addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x1c000); + break; + } + } + WRITE_CHAR(addr, 0); + dummy = *addr; +#endif /* CONFIG_ZUMA_V2 */ +} + +void +display_mem_map(void) +{ + int i,j; + unsigned int base,size,width; + /* SDRAM */ + printf("SDRAM\n"); + for(i=0;i<=BANK3;i++) { + base = memoryGetBankBaseAddress(i); + size = memoryGetBankSize(i); + if(size !=0) + { + printf("BANK%d: base - 0x%08x\tsize - %dM bytes\n",i,base,size>>20); + } + } + + /* CPU's PCI windows */ + for(i=0;i<=PCI_HOST1;i++) { + printf("\nCPU's PCI %d windows\n", i); + base=pciGetSpaceBase(i,PCI_IO); + size=pciGetSpaceSize(i,PCI_IO); + printf(" IO: base - 0x%08x\tsize - %dM bytes\n",base,size>>20); + for(j=0;j<=PCI_REGION3;j++) { + base = pciGetSpaceBase(i,j); + size = pciGetSpaceSize(i,j); + printf("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n",j,base, + size>>20); + } + } + + /* Devices */ + printf("\nDEVICES\n"); + for(i=0;i<=DEVICE3;i++) { + base = memoryGetDeviceBaseAddress(i); + size = memoryGetDeviceSize(i); + width= memoryGetDeviceWidth(i) * 8; + printf("DEV %d: base - 0x%08x\tsize - %dM bytes\twidth - %d bits\n", + i, base, size>>20, width); + } + + /* Bootrom */ + base = memoryGetDeviceBaseAddress(BOOT_DEVICE); /* Boot */ + size = memoryGetDeviceSize(BOOT_DEVICE); + width= memoryGetDeviceWidth(BOOT_DEVICE) * 8; + printf(" BOOT: base - 0x%08x\tsize - %dM bytes\twidth - %d bits\n", + base, size>>20, width); +} + diff --git a/board/evb64260/flash.c b/board/evb64260/flash.c new file mode 100644 index 0000000..2d2bf1c --- /dev/null +++ b/board/evb64260/flash.c @@ -0,0 +1,805 @@ +/* + * (C) Copyright 2001 + * Josh Huber , Mission Critical Linux, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * flash.c - flash support for the 512k, 8bit boot flash on the GEVB + * most of this file was based on the existing U-Boot + * flash drivers. + */ + +#include +#include +#include +#include +#include "intel_flash.h" + +#define FLASH_ROM 0xFFFD /* unknown flash type */ +#define FLASH_RAM 0xFFFE /* unknown flash type */ +#define FLASH_MAN_UNKNOWN 0xFFFF0000 + +/* #define DEBUG */ +/* #define FLASH_ID_OVERRIDE */ /* Hack to set type to 040B if ROM emulator is installed. + * Can be used to program a ROM in circuit if a programmer + * is not available by swapping the rom out. */ + +/* Intel flash commands */ +int flash_erase_intel(flash_info_t *info, int s_first, int s_last); +int write_word_intel(bank_addr_t addr, bank_word_t value); + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (int portwidth, vu_long *addr, flash_info_t *info); +static int write_word (flash_info_t *info, ulong dest, ulong data); +static void flash_get_offsets (ulong base, flash_info_t *info); + +/*----------------------------------------------------------------------- + */ + +unsigned long +flash_init (void) +{ + unsigned int i; + unsigned long size_b0 = 0, size_b1 = 0; + unsigned long base, flash_size; + + /* Init: no FLASHes known */ + for (i=0; i>20, base); + + if (flash_info[i].flash_id == FLASH_UNKNOWN) { + if(i==1) { + printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", + base, size_b1, size_b1<<20); + } + break; + } + size_b1+=size; + base+=size; + } + + flash_size = size_b0 + size_b1; + return flash_size; +} + +/*----------------------------------------------------------------------- + */ +static void +flash_get_offsets (ulong base, flash_info_t *info) +{ + int i; + int sector_size; + + if(!info->sector_count) return; + + /* set up sector start address table */ + switch(info->flash_id & FLASH_TYPEMASK) { + case FLASH_AM040: + case FLASH_28F128J3A: + case FLASH_28F640J3A: + case FLASH_RAM: + /* this chip has uniformly spaced sectors */ + sector_size=info->size/info->sector_count; + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * sector_size); + break; + default: + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00008000; + info->start[2] = base + 0x0000C000; + info->start[3] = base + 0x00010000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = base + (i * 0x00020000) - 0x00060000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00008000; + info->start[i--] = base + info->size - 0x0000C000; + info->start[i--] = base + info->size - 0x00010000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00020000; + } + } + } +} + +/*----------------------------------------------------------------------- + */ +void +flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: printf ("AMD "); break; + case FLASH_MAN_FUJ: printf ("FUJITSU "); break; + case FLASH_MAN_INTEL: printf ("INTEL "); break; + default: printf ("Unknown Vendor "); break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AM040: + printf ("AM29LV040B (4 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM400B: + printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM400T: + printf ("AM29LV400T (4 Mbit, top boot sector)\n"); + break; + case FLASH_AM800B: + printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM800T: + printf ("AM29LV800T (8 Mbit, top boot sector)\n"); + break; + case FLASH_AM160B: + printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM160T: + printf ("AM29LV160T (16 Mbit, top boot sector)\n"); + break; + case FLASH_AM320B: + printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM320T: + printf ("AM29LV320T (32 Mbit, top boot sector)\n"); + break; + case FLASH_28F640J3A: + printf ("28F640J3A (64 Mbit)\n"); + break; + case FLASH_28F128J3A: + printf ("28F128J3A (128 Mbit)\n"); + break; + case FLASH_ROM: + printf ("ROM\n"); + break; + case FLASH_RAM: + printf ("RAM\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + puts (" Size: "); + print_size (info->size, ""); + printf (" in %d Sectors\n", info->sector_count); + + printf (" Sector Start Addresses:"); + for (i=0; isector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); + return; +} + +/*----------------------------------------------------------------------- + */ + + +/*----------------------------------------------------------------------- + */ + +/* + * The following code cannot be run from FLASH! + */ + +static inline void flash_cmd(int width, volatile unsigned char *addr, int offset, unsigned char cmd) +{ + /* supports 1x8, 1x16, and 2x16 */ + /* 2x8 and 4x8 are not supported */ + if(width==4) { + /* assuming chips are in 16 bit mode */ + /* 2x16 */ + unsigned long cmd32=(cmd<<16)|cmd; + *(volatile unsigned long *)(addr+offset*2)=cmd32; + } else { + /* 1x16 or 1x8 */ + *(volatile unsigned char *)(addr+offset)=cmd; + } +} + +static ulong +flash_get_size (int portwidth, vu_long *addr, flash_info_t *info) +{ + short i; + volatile unsigned char *caddr = (unsigned char *)addr; + volatile unsigned short *saddr = (unsigned short *)addr; + volatile unsigned long *laddr = (unsigned long *)addr; + char old[2], save; + ulong id, manu, base = (ulong)addr; + + info->portwidth=portwidth; + + save = *caddr; + + flash_cmd(portwidth,caddr,0,0xf0); + flash_cmd(portwidth,caddr,0,0xf0); + + udelay(10); + + old[0] = caddr[0]; + old[1] = caddr[1]; + + + if(old[0]!=0xf0) { + flash_cmd(portwidth,caddr,0,0xf0); + flash_cmd(portwidth,caddr,0,0xf0); + + udelay(10); + + if(*caddr==0xf0) { + /* this area is ROM */ + *caddr=save; +#ifndef FLASH_ID_OVERRIDE + info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN; + info->sector_count = 8; + info->size = 0x80000; +#else + info->flash_id = FLASH_MAN_AMD + FLASH_AM040; + info->sector_count = 8; + info->size = 0x80000; + info->chipwidth=1; +#endif + flash_get_offsets(base, info); + return info->size; + } + } else { + *caddr=0; + + udelay(10); + + if(*caddr==0) { + /* this area is RAM */ + *caddr=save; + info->flash_id = FLASH_RAM + FLASH_MAN_UNKNOWN; + info->sector_count = 8; + info->size = 0x80000; + flash_get_offsets(base, info); + return info->size; + } + flash_cmd(portwidth,caddr,0,0xf0); + + udelay(10); + } + + /* Write auto select command: read Manufacturer ID */ + flash_cmd(portwidth,caddr,0x555,0xAA); + flash_cmd(portwidth,caddr,0x2AA,0x55); + flash_cmd(portwidth,caddr,0x555,0x90); + + udelay(10); + + if ((caddr[0] == old[0]) && + (caddr[1] == old[1])) { + + /* this area is ROM */ +#ifndef FLASH_ID_OVERRIDE + info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN; + info->sector_count = 8; + info->size = 0x80000; +#else + info->flash_id = FLASH_MAN_AMD + FLASH_AM040; + info->sector_count = 8; + info->size = 0x80000; + info->chipwidth=1; +#endif + flash_get_offsets(base, info); + return info->size; +#ifdef DEBUG + } else { + printf("%px%d: %02x:%02x -> %02x:%02x\n", + caddr, portwidth, old[0], old[1], + caddr[0], caddr[1]); +#endif + } + + switch(portwidth) { + case 1: + manu = caddr[0]; + manu |= manu<<16; + id = caddr[1]; + break; + case 2: + manu = saddr[0]; + manu |= manu<<16; + id = saddr[1]; + id |= id<<16; + break; + case 4: + manu = laddr[0]; + id = laddr[1]; + break; + default: + id = manu = -1; + break; + } + +#ifdef DEBUG + printf("\n%08lx:%08lx:%08lx\n", base, manu, id); + printf("%08lx %08lx %08lx %08lx\n", + laddr[0],laddr[1],laddr[2],laddr[3]); +#endif + + switch (manu) { + case AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + case FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + case INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + break; + default: + printf("Unknown Mfr [%08lx]:%08lx\n", manu, id); + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ + } + + switch (id) { + case AMD_ID_LV400T: + info->flash_id += FLASH_AM400T; + info->sector_count = 11; + info->size = 0x00100000; + info->chipwidth=1; + break; /* => 1 MB */ + + case AMD_ID_LV400B: + info->flash_id += FLASH_AM400B; + info->sector_count = 11; + info->size = 0x00100000; + info->chipwidth=1; + break; /* => 1 MB */ + + case AMD_ID_LV800T: + info->flash_id += FLASH_AM800T; + info->sector_count = 19; + info->size = 0x00200000; + info->chipwidth=1; + break; /* => 2 MB */ + + case AMD_ID_LV800B: + info->flash_id += FLASH_AM800B; + info->sector_count = 19; + info->size = 0x00200000; + info->chipwidth=1; + break; /* => 2 MB */ + + case AMD_ID_LV160T: + info->flash_id += FLASH_AM160T; + info->sector_count = 35; + info->size = 0x00400000; + info->chipwidth=1; + break; /* => 4 MB */ + + case AMD_ID_LV160B: + info->flash_id += FLASH_AM160B; + info->sector_count = 35; + info->size = 0x00400000; + info->chipwidth=1; + break; /* => 4 MB */ +#if 0 /* enable when device IDs are available */ + case AMD_ID_LV320T: + info->flash_id += FLASH_AM320T; + info->sector_count = 67; + info->size = 0x00800000; + break; /* => 8 MB */ + + case AMD_ID_LV320B: + info->flash_id += FLASH_AM320B; + info->sector_count = 67; + info->size = 0x00800000; + break; /* => 8 MB */ +#endif + case AMD_ID_LV040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x80000; + info->chipwidth=1; + break; + + case INTEL_ID_28F640J3A: + info->flash_id += FLASH_28F640J3A; + info->sector_count = 64; + info->size = 128*1024 * 64; /* 128kbytes x 64 blocks */ + info->chipwidth=2; + if(portwidth==4) info->size*=2; /* 2x16 */ + break; + + case INTEL_ID_28F128J3A: + info->flash_id += FLASH_28F128J3A; + info->sector_count = 128; + info->size = 128*1024 * 128; /* 128kbytes x 128 blocks */ + info->chipwidth=2; + if(portwidth==4) info->size*=2; /* 2x16 */ + break; + + default: + printf("Unknown id %lx:[%lx]\n", manu, id); + info->flash_id = FLASH_UNKNOWN; + info->chipwidth=1; + return (0); /* => no or unknown flash */ + + } + + flash_get_offsets(base, info); + +#if 0 + /* set up sector start address table */ + if (info->flash_id & FLASH_AM040) { + /* this chip has uniformly spaced sectors */ + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + + } else if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00008000; + info->start[2] = base + 0x0000C000; + info->start[3] = base + 0x00010000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = base + (i * 0x00020000) - 0x00060000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00008000; + info->start[i--] = base + info->size - 0x0000C000; + info->start[i--] = base + info->size - 0x00010000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00020000; + } + } +#endif + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0)=0x02 */ + /* D0 = 1 if protected */ + caddr = (volatile unsigned char *)(info->start[i]); + saddr = (volatile unsigned short *)(info->start[i]); + laddr = (volatile unsigned long *)(info->start[i]); + if(portwidth==1) + info->protect[i] = caddr[2] & 1; + else if(portwidth==2) + info->protect[i] = saddr[2] & 1; + else + info->protect[i] = laddr[2] & 1; + } + + /* + * Prevent writes to uninitialized FLASH. + */ + if (info->flash_id != FLASH_UNKNOWN) { + caddr = (volatile unsigned char *)info->start[0]; + + flash_cmd(portwidth,caddr,0,0xF0); /* reset bank */ + } + + return (info->size); +} + +/* TODO: 2x16 unsupported */ +int +flash_erase (flash_info_t *info, int s_first, int s_last) +{ + volatile unsigned char *addr = (char *)(info->start[0]); + int flag, prot, sect, l_sect; + ulong start, now, last; + + /* TODO: 2x16 unsupported */ + if(info->portwidth==4) return 1; + + if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 1; + if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) { + for (sect = s_first; sect<=s_last; sect++) { + int sector_size=info->size/info->sector_count; + addr = (char *)(info->start[sect]); + memset((void *)addr, 0, sector_size); + } + return 0; + } + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + if ((info->flash_id&FLASH_VENDMASK) == FLASH_MAN_INTEL) { + return flash_erase_intel(info, + (unsigned short)s_first, + (unsigned short)s_last); + } + +#if 0 + if ((info->flash_id == FLASH_UNKNOWN) || + (info->flash_id > FLASH_AMD_COMP)) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } +#endif + + prot = 0; + for (sect=s_first; sect<=s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + flash_cmd(info->portwidth,addr,0x555,0xAA); + flash_cmd(info->portwidth,addr,0x2AA,0x55); + flash_cmd(info->portwidth,addr,0x555,0x80); + flash_cmd(info->portwidth,addr,0x555,0xAA); + flash_cmd(info->portwidth,addr,0x2AA,0x55); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr = (char *)(info->start[sect]); + flash_cmd(info->portwidth,addr,0,0x30); + l_sect = sect; + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + + /* + * We wait for the last triggered sector + */ + if (l_sect < 0) + goto DONE; + + start = get_timer (0); + last = start; + addr = (volatile unsigned char *)(info->start[l_sect]); + /* broken for 2x16: TODO */ + while ((addr[0] & 0x80) != 0x80) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc ('.'); + last = now; + } + } + +DONE: + /* reset to read mode */ + addr = (volatile unsigned char *)info->start[0]; + flash_cmd(info->portwidth,addr,0,0xf0); + flash_cmd(info->portwidth,addr,0,0xf0); + + printf (" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +/* broken for 2x16: TODO */ +int +write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + + if(info->portwidth==4) return 1; + + if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 0; + if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) { + memcpy((void *)addr, src, cnt); + return 0; + } + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i=0, cp=wp; i0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i=0; i<4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + return (write_word(info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +/* broken for 2x16: TODO */ +static int +write_word (flash_info_t *info, ulong dest, ulong data) +{ + volatile unsigned char *addr = (char *)(info->start[0]); + ulong start; + int flag, i; + + if(info->portwidth==4) return 1; + + if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 1; + if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) { + *(unsigned long *)dest=data; + return 0; + } + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + unsigned short low = data & 0xffff; + unsigned short hi = (data >> 16) & 0xffff; + int ret = write_word_intel((bank_addr_t)dest, hi); + + if (!ret) ret = write_word_intel((bank_addr_t)(dest+2), low); + + return ret; + } + + /* Check if Flash is (sufficiently) erased */ + if ((*((vu_long *)dest) & data) != data) { + return (2); + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* first, perform an unlock bypass command to speed up flash writes */ + addr[0x555] = 0xAA; + addr[0x2AA] = 0x55; + addr[0x555] = 0x20; + + /* write each byte out */ + for (i = 0; i < 4; i++) { + char *data_ch = (char *)&data; + addr[0] = 0xA0; + *(((char *)dest)+i) = data_ch[i]; + udelay(10); /* XXX */ + } + + /* we're done, now do an unlock bypass reset */ + addr[0] = 0x90; + addr[0] = 0x00; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer (0); + while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return (1); + } + } + return (0); +} diff --git a/board/evb64260/memory.c b/board/evb64260/memory.c new file mode 100644 index 0000000..9d301f8 --- /dev/null +++ b/board/evb64260/memory.c @@ -0,0 +1,457 @@ +/* Memory.c - Memory mappings and remapping functions */ + +/* Copyright - Galileo technology. */ + +/* modified by Josh Huber to clean some things up, and + * fit it into the U-Boot framework */ + +#include +#include + +/******************************************************************** +* memoryGetBankBaseAddress - Gets the base address of a memory bank +* - If the memory bank size is 0 then this base address has no meaning!!! +* +* +* INPUTS: MEMORY_BANK bank - The bank we ask for its base Address. +* OUTPUT: N/A +* RETURNS: Memory bank base address. +*********************************************************************/ +static unsigned long memoryGetBankRegOffset(MEMORY_BANK bank) +{ + switch (bank) + { + case BANK0: + return SCS_0_LOW_DECODE_ADDRESS; + case BANK1: + return SCS_1_LOW_DECODE_ADDRESS; + case BANK2: + return SCS_2_LOW_DECODE_ADDRESS; + case BANK3: + return SCS_3_LOW_DECODE_ADDRESS; + } + return SCS_0_LOW_DECODE_ADDRESS; /* default value */ +} + +unsigned int memoryGetBankBaseAddress(MEMORY_BANK bank) +{ + unsigned int base; + unsigned int regOffset=memoryGetBankRegOffset(bank); + + GT_REG_READ(regOffset,&base); + base = base << 20; + return base; +} + +/******************************************************************** +* memoryGetDeviceBaseAddress - Gets the base address of a device. +* - If the device size is 0 then this base address has no meaning!!! +* +* +* INPUT: DEVICE device - The device we ask for its base address. +* OUTPUT: N/A +* RETURNS: Device base address. +*********************************************************************/ +static unsigned int memoryGetDeviceRegOffset(DEVICE device) +{ + switch (device) + { + case DEVICE0: + return CS_0_LOW_DECODE_ADDRESS; + case DEVICE1: + return CS_1_LOW_DECODE_ADDRESS; + case DEVICE2: + return CS_2_LOW_DECODE_ADDRESS; + case DEVICE3: + return CS_3_LOW_DECODE_ADDRESS; + case BOOT_DEVICE: + return BOOTCS_LOW_DECODE_ADDRESS; + } + return CS_0_LOW_DECODE_ADDRESS; /* default value */ +} + +unsigned int memoryGetDeviceBaseAddress(DEVICE device) +{ + unsigned int regBase; + unsigned int regEnd; + unsigned int regOffset=memoryGetDeviceRegOffset(device); + + GT_REG_READ(regOffset, ®Base); + GT_REG_READ(regOffset+8, ®End); + + if(regEnd<=regBase) return 0xffffffff; /* ERROR !!! */ + + regBase = regBase << 20; + return regBase; +} + +/******************************************************************** +* memoryGetBankSize - Returns the size of a memory bank. +* +* +* INPUT: MEMORY_BANK bank - The bank we ask for its size. +* OUTPUT: N/A +* RETURNS: Memory bank size. +*********************************************************************/ +unsigned int memoryGetBankSize(MEMORY_BANK bank) +{ + unsigned int size,base; + unsigned int highValue; + unsigned int highAddress=memoryGetBankRegOffset(bank)+8; + + base = memoryGetBankBaseAddress(bank); + GT_REG_READ(highAddress,&highValue); + highValue = (highValue + 1) << 20; + if(base > highValue) + size=0; + else + size = highValue - base; + return size; +} + +/******************************************************************** +* memoryGetDeviceSize - Returns the size of a device memory space +* +* +* INPUT: DEVICE device - The device we ask for its base address. +* OUTPUT: N/A +* RETURNS: Size of a device memory space. +*********************************************************************/ +unsigned int memoryGetDeviceSize(DEVICE device) +{ + unsigned int size,base; + unsigned int highValue; + unsigned int highAddress=memoryGetDeviceRegOffset(device)+8; + + base = memoryGetDeviceBaseAddress(device); + GT_REG_READ(highAddress,&highValue); + if (highValue == 0xfff) + { + size = (~base) + 1; /* what the heck is this? */ + return size; + } + else + highValue = (highValue + 1) << 20; + + if(base > highValue) + size=0; + else + size = highValue - base; + return size; +} + +/******************************************************************** +* memoryGetDeviceWidth - A device can be with: 1,2,4 or 8 Bytes data width. +* The width is determine in registers: 'Device Parameters' +* registers (0x45c, 0x460, 0x464, 0x468, 0x46c - for each device. +* at bits: [21:20]. +* +* INPUT: DEVICE device - Device number +* OUTPUT: N/A +* RETURNS: Device width in Bytes (1,2,4 or 8), 0 if error had occurred. +*********************************************************************/ +unsigned int memoryGetDeviceWidth(DEVICE device) +{ + unsigned int width; + unsigned int regValue; + + GT_REG_READ(DEVICE_BANK0PARAMETERS + device*4,®Value); + width = (regValue & 0x00300000) >> 20; + switch (width) + { + case 0: + return 1; + case 1: + return 2; + case 2: + return 4; + case 3: + return 8; + default: + return 0; + } +} + +bool memoryMapBank(MEMORY_BANK bank, unsigned int bankBase,unsigned int bankLength) +{ + unsigned int low=0xfff; + unsigned int high=0x0; + unsigned int regOffset=memoryGetBankRegOffset(bank); + + if(bankLength!=0) { + low = (bankBase >> 20) & 0xffff; + high=((bankBase+bankLength)>>20)-1; + } + +#ifdef DEBUG + { + unsigned int oldLow, oldHigh; + GT_REG_READ(regOffset,&oldLow); + GT_REG_READ(regOffset+8,&oldHigh); + + printf("b%d %x-%x->%x-%x\n", bank, oldLow, oldHigh, low, high); + } +#endif + + GT_REG_WRITE(regOffset,low); + GT_REG_WRITE(regOffset+8,high); + + return true; +} +bool memoryMapDeviceSpace(DEVICE device, unsigned int deviceBase,unsigned int deviceLength) +{ + /* TODO: what are appropriate "unmapped" values? */ + unsigned int low=0xfff; + unsigned int high=0x0; + unsigned int regOffset=memoryGetDeviceRegOffset(device); + + if(deviceLength != 0) { + low=deviceBase>>20; + high=((deviceBase+deviceLength)>>20)-1; + } else { + /* big problems in here... */ + /* this will HANG */ + } + + GT_REG_WRITE(regOffset,low); + GT_REG_WRITE(regOffset+8,high); + + return true; +} + + +/******************************************************************** +* memoryMapInternalRegistersSpace - Sets new base address for the internals +* registers. +* +* INPUTS: unsigned int internalRegBase - The new base address. +* RETURNS: true on success, false on failure +*********************************************************************/ +bool memoryMapInternalRegistersSpace(unsigned int internalRegBase) +{ + unsigned int currentValue; + unsigned int internalValue = internalRegBase; + + internalRegBase = (internalRegBase >> 20); + GT_REG_READ(INTERNAL_SPACE_DECODE,¤tValue); + internalRegBase = (currentValue & 0xffff0000) | internalRegBase; + GT_REG_WRITE(INTERNAL_SPACE_DECODE,internalRegBase); + INTERNAL_REG_BASE_ADDR = internalValue; + return true; +} + +/******************************************************************** +* memoryGetInternalRegistersSpace - Gets internal registers Base Address. +* +* INPUTS: unsigned int internalRegBase - The new base address. +* RETURNS: true on success, false on failure +*********************************************************************/ +unsigned int memoryGetInternalRegistersSpace(void) +{ + return INTERNAL_REG_BASE_ADDR; +} + +/******************************************************************** +* memorySetProtectRegion - This function modifys one of the 8 regions with +* one of the three protection mode. +* - Be advised to check the spec before modifying them. +* +* +* Inputs: CPU_PROTECT_REGION - one of the eight regions. +* CPU_ACCESS - general access. +* CPU_WRITE - read only access. +* CPU_CACHE_PROTECT - chache access. +* we defining CPU because there is another protect from the pci SIDE. +* Returns: false if one of the parameters is wrong and true else +*********************************************************************/ +bool memorySetProtectRegion(MEMORY_PROTECT_REGION region, + MEMORY_ACCESS memAccess, + MEMORY_ACCESS_WRITE memWrite, + MEMORY_CACHE_PROTECT cacheProtection, + unsigned int baseAddress, + unsigned int regionLength) +{ + unsigned int protectHigh = baseAddress + regionLength; + + if(regionLength == 0) /* closing the region */ + { + GT_REG_WRITE(CPU_LOW_PROTECT_ADDRESS_0 + 0x10*region,0x0000ffff); + GT_REG_WRITE(CPU_HIGH_PROTECT_ADDRESS_0 + 0x10*region,0); + return true; + } + baseAddress = (baseAddress & 0xfff00000) >> 20; + baseAddress = baseAddress | memAccess << 16 | memWrite << 17 + | cacheProtection << 18; + GT_REG_WRITE(CPU_LOW_PROTECT_ADDRESS_0 + 0x10*region,baseAddress); + protectHigh = (protectHigh & 0xfff00000) >> 20; + GT_REG_WRITE(CPU_HIGH_PROTECT_ADDRESS_0 + 0x10*region,protectHigh - 1); + return true; +} + +/******************************************************************** +* memorySetRegionSnoopMode - This function modifys one of the 4 regions which +* supports Cache Coherency. +* +* +* Inputs: SNOOP_REGION region - One of the four regions. +* SNOOP_TYPE snoopType - There is four optional Types: +* 1. No Snoop. +* 2. Snoop to WT region. +* 3. Snoop to WB region. +* 4. Snoop & Invalidate to WB region. +* unsigned int baseAddress - Base Address of this region. +* unsigned int topAddress - Top Address of this region. +* Returns: false if one of the parameters is wrong and true else +*********************************************************************/ +bool memorySetRegionSnoopMode(MEMORY_SNOOP_REGION region, + MEMORY_SNOOP_TYPE snoopType, + unsigned int baseAddress, + unsigned int regionLength) +{ + unsigned int snoopXbaseAddress; + unsigned int snoopXtopAddress; + unsigned int data; + unsigned int snoopHigh = baseAddress + regionLength; + + if( (region > MEM_SNOOP_REGION3) || (snoopType > MEM_SNOOP_WB) ) + return false; + snoopXbaseAddress = SNOOP_BASE_ADDRESS_0 + 0x10 * region; + snoopXtopAddress = SNOOP_TOP_ADDRESS_0 + 0x10 * region; + if(regionLength == 0) /* closing the region */ + { + GT_REG_WRITE(snoopXbaseAddress,0x0000ffff); + GT_REG_WRITE(snoopXtopAddress,0); + return true; + } + baseAddress = baseAddress & 0xffff0000; + data = (baseAddress >> 16) | snoopType << 16; + GT_REG_WRITE(snoopXbaseAddress,data); + snoopHigh = (snoopHigh & 0xfff00000) >> 20; + GT_REG_WRITE(snoopXtopAddress,snoopHigh - 1); + return true; +} + +/******************************************************************** +* memoryRemapAddress - This fubction used for address remapping. +* +* +* Inputs: regOffset: remap register +* remapValue : +* Returns: false if one of the parameters is erroneous,true otherwise. +*********************************************************************/ +bool memoryRemapAddress(unsigned int remapReg, unsigned int remapValue) +{ + unsigned int valueForReg; + valueForReg = (remapValue & 0xfff00000) >> 20; + GT_REG_WRITE(remapReg, valueForReg); + return true; +} + +/******************************************************************** +* memoryGetDeviceParam - This function used for getting device parameters from +* DEVICE BANK PARAMETERS REGISTER +* +* +* Inputs: - deviceParam: STRUCT with paramiters for DEVICE BANK +* PARAMETERS REGISTER +* - deviceNum : number of device +* Returns: false if one of the parameters is erroneous,true otherwise. +*********************************************************************/ +bool memoryGetDeviceParam(DEVICE_PARAM *deviceParam, DEVICE deviceNum) +{ + unsigned int valueOfReg; + unsigned int calcData; + + GT_REG_READ(DEVICE_BANK0PARAMETERS + 4 * deviceNum, &valueOfReg); + calcData = (0x7 & valueOfReg) + ((0x400000 & valueOfReg) >> 19); + deviceParam -> turnOff = calcData; /* Turn Off */ + + calcData = ((0x78 & valueOfReg) >> 3) + ((0x800000 & valueOfReg) >> 19); + deviceParam -> acc2First = calcData; /* Access To First */ + + calcData = ((0x780 & valueOfReg) >> 7) + ((0x1000000 & valueOfReg) >> 20); + deviceParam -> acc2Next = calcData; /* Access To Next */ + + calcData = ((0x3800 & valueOfReg) >> 11) + ((0x2000000 & valueOfReg) >> 22); + deviceParam -> ale2Wr = calcData; /* Ale To Write */ + + calcData = ((0x1c000 & valueOfReg) >> 14) + ((0x4000000 & valueOfReg) >> 23); + deviceParam -> wrLow = calcData; /* Write Active */ + + calcData = ((0xe0000 & valueOfReg) >> 17) + ((0x8000000 & valueOfReg) >> 24); + deviceParam -> wrHigh = calcData; /* Write High */ + + calcData = ((0x300000 & valueOfReg) >> 20); + switch (calcData) + { + case 0: + deviceParam -> deviceWidth = 1; /* one Byte - 8-bit */ + break; + case 1: + deviceParam -> deviceWidth = 2; /* two Bytes - 16-bit */ + break; + case 2: + deviceParam -> deviceWidth = 4; /* four Bytes - 32-bit */ + break; + case 3: + deviceParam -> deviceWidth = 8; /* eight Bytes - 64-bit */ + break; + default: + deviceParam -> deviceWidth = 1; + break; + } + return true; +} + +/******************************************************************** +* memorySetDeviceParam - This function used for setting device parameters to +* DEVICE BANK PARAMETERS REGISTER +* +* +* Inputs: - deviceParam: STRUCT for store paramiters from DEVICE BANK +* PARAMETERS REGISTER +* - deviceNum : number of device +* Returns: false if one of the parameters is erroneous,true otherwise. +*********************************************************************/ +bool memorySetDeviceParam(DEVICE_PARAM *deviceParam, DEVICE deviceNum) +{ + unsigned int valueForReg; + + if((deviceParam -> turnOff >= 0xf) || (deviceParam -> acc2First >= 0x1f) || + (deviceParam -> acc2Next >= 0x1f) || (deviceParam -> ale2Wr >= 0xf) || + (deviceParam -> wrLow >= 0xf) || (deviceParam -> wrHigh >= 0xf)) + return false; + valueForReg = (((deviceParam -> turnOff) & 0x7) | + (((deviceParam -> turnOff) & 0x8) << 19) | + (((deviceParam -> acc2First) & 0xf) << 3) | + (((deviceParam -> acc2First) & 0x10) << 19) | + (((deviceParam -> acc2Next) & 0xf) << 7) | + (((deviceParam -> acc2Next) & 0x10) << 20) | + (((deviceParam -> ale2Wr) & 0x7) << 11) | + (((deviceParam -> ale2Wr) & 0xf) << 22) | + (((deviceParam -> wrLow) & 0x7) << 14) | + (((deviceParam -> wrLow) & 0xf) << 23) | + (((deviceParam -> wrHigh) & 0x7) << 17) | + (((deviceParam -> wrHigh) & 0xf) << 24)); + /* insert the device width: */ + switch(deviceParam->deviceWidth) + { + case 1: + valueForReg = valueForReg | _8BIT; + break; + case 2: + valueForReg = valueForReg | _16BIT; + break; + case 4: + valueForReg = valueForReg | _32BIT; + break; + case 8: + valueForReg = valueForReg | _64BIT; + break; + default: + valueForReg = valueForReg | _8BIT; + break; + } + GT_REG_WRITE(DEVICE_BANK0PARAMETERS + 4 * deviceNum, valueForReg); + return true; +} diff --git a/board/evb64260/u-boot.lds b/board/evb64260/u-boot.lds new file mode 100644 index 0000000..7b10c0d --- /dev/null +++ b/board/evb64260/u-boot.lds @@ -0,0 +1,129 @@ +/* + * (C) Copyright 2001 + * Josh Huber , Mission Critical Linux, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * u-boot.lds - linker script for U-Boot on the Galileo Eval Board. + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/74xx_7xx/start.o (.text) + +/* store the environment in a seperate sector in the boot flash */ +/* . = env_offset; */ +/* common/environment.o(.text) */ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/gth/README b/board/gth/README new file mode 100644 index 0000000..44caf3a --- /dev/null +++ b/board/gth/README @@ -0,0 +1,20 @@ +Written by Thomas.Lange@corelatus.com 010805 + +To make a system for gth that actually works ;-) +the variable TBASE needs to be set to 0,1 or 2 +depending on location where image is supposed to +be started from. +E.g. make TBASE=1 + +0: Start from RAM, base 0 + +1: Start from flash_base + 0x10070 + +2: Start from flash_base + 0x30070 + +When using 1 or 2, the image is supposed to be launched +from miniboot that boots the first U-Boot image found in +flash. +For miniboot code, description, see www.opensource.se + + diff --git a/mkconfig b/mkconfig new file mode 100644 index 0000000..5d2eb1e --- /dev/null +++ b/mkconfig @@ -0,0 +1,57 @@ +#!/bin/sh -e + +# Script to create header files and links to configure +# U-Boot for a specific board. +# +# Parameters: Target Architecture CPU Board +# +# (C) 2002 DENX Software Engineering, Wolfgang Denk +# + +APPEND=no # Default: Create new config file + +while [ $# -gt 0 ] ; do + case "$1" in + --) shift ; break ;; + -a) shift ; APPEND=yes ;; + *) break ;; + esac +done + +[ $# -lt 4 ] && exit 1 +[ $# -gt 5 ] && exit 1 + +echo "Configuring for $1 board..." + +cd ./include + +# +# Create link to architecture specific headers +# +rm -f asm +ln -s asm-$2 asm +rm -f asm-$2/arch +ln -s arch-$3 asm-$2/arch + +# +# Create include file for Make +# +echo "ARCH = $2" > config.mk +echo "CPU = $3" >> config.mk +echo "BOARD = $4" >> config.mk + +[ "$5" ] && echo "VENDOR = $5" >> config.mk + +# +# Create board specific header file +# +if [ "$APPEND" = "yes" ] # Append to existing config file +then + echo >> config.h +else + > config.h # Create new config file +fi +echo "/* Automatically generated - do not edit */" >>config.h +echo "#include " >>config.h + +exit 0 -- cgit v1.1