From 7e40e1926a237ad215901cd780f309e995105515 Mon Sep 17 00:00:00 2001 From: Siarhei Siamashka Date: Sun, 3 Aug 2014 05:32:43 +0300 Subject: sunxi: dram: Remove broken impedance and ODT configuration code We can safely remove it, because none of the currently supported boards uses these features. The existing implementation had multiple problems: - unnecessary code duplication between sun4i/sun5i/sun7i - ZQ calibration was never initiated explicitly, and could be only triggered by setting the highest bit in the 'zq' parameter in the 'dram_para' struct (this was never actually done for any of the known Allwinner devices). - even if the ZQ calibration could be started, no attempts were made to wait for its completion, or checking whether the default automatically initiated ZQ calibration is still in progress - ODT was only ever enabled on sun4i, but not on sun5i/sun7i Additionally, SDR_IOCR was set to 0x00cc0000 only on sun4i. There are some hints in the Rockchip Linux kernel sources, indicating that these bits are related to the automatic I/O power down feature, which is poorly understood on sunxi hardware at the moment. Avoiding to set these bits on sun4i too does not seem to have any measurable/visible impact. The impedance and ODT configuration code will be re-introdeced in one of the next comits. Signed-off-by: Siarhei Siamashka Acked-by: Ian Campbell Signed-off-by: Hans de Goede --- arch/arm/cpu/armv7/sunxi/dram.c | 27 --------------------------- 1 file changed, 27 deletions(-) diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c index 6849952..33e8bd6 100644 --- a/arch/arm/cpu/armv7/sunxi/dram.c +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -492,20 +492,9 @@ unsigned long dramc_init(struct dram_para *para) writel(reg_val, &dram->dcr); #ifdef CONFIG_SUN7I - setbits_le32(&dram->zqcr1, (0x1 << 24) | (0x1 << 1)); - if (para->tpr4 & 0x2) - clrsetbits_le32(&dram->zqcr1, (0x1 << 24), (0x1 << 1)); dramc_clock_output_en(1); #endif -#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)) - /* set odt impendance divide ratio */ - reg_val = ((para->zq) >> 8) & 0xfffff; - reg_val |= ((para->zq) & 0xff) << 20; - reg_val |= (para->zq) & 0xf0000000; - writel(reg_val, &dram->zqcr0); -#endif - mctl_set_cke_delay(); #ifdef CONFIG_SUN7I @@ -521,22 +510,6 @@ unsigned long dramc_init(struct dram_para *para) mctl_enable_dllx(para->tpr3); -#ifdef CONFIG_SUN4I - /* set odt impedance divide ratio */ - reg_val = ((para->zq) >> 8) & 0xfffff; - reg_val |= ((para->zq) & 0xff) << 20; - reg_val |= (para->zq) & 0xf0000000; - writel(reg_val, &dram->zqcr0); -#endif - -#ifdef CONFIG_SUN4I - /* set I/O configure register */ - reg_val = 0x00cc0000; - reg_val |= (para->odt_en) & 0x3; - reg_val |= ((para->odt_en) & 0x3) << 30; - writel(reg_val, &dram->iocr); -#endif - /* set refresh period */ dramc_set_autorefresh_cycle(para->clock, para->type - 2, density); -- cgit v1.1