From 6dd956ebdeb0d0b247a511de6302903be02802e3 Mon Sep 17 00:00:00 2001 From: Zhang Jiejing Date: Wed, 14 Dec 2011 19:12:20 +0800 Subject: ENGR00170299-1 Android: add support fastboot function add support for otg in MX6Q uboot to enable fastboot function. Signed-off-by: Zhang Jiejing --- cpu/arm_cortexa8/mx6/generic.c | 58 ++++- cpu/arm_cortexa8/mx6/iomux-v3.c | 14 ++ drivers/usb/gadget/imx_udc.c | 20 +- include/asm-arm/arch-mx6/iomux-v3.h | 5 + include/asm-arm/arch-mx6/mx6.h | 2 + include/asm-arm/arch-mx6/mx6_pins.h | 2 + include/usb/imx_udc.h | 75 +++++- include/usb/regs-usbphy-mx6.h | 479 ++++++++++++++++++++++++++++++++++++ 8 files changed, 651 insertions(+), 4 deletions(-) create mode 100644 include/usb/regs-usbphy-mx6.h diff --git a/cpu/arm_cortexa8/mx6/generic.c b/cpu/arm_cortexa8/mx6/generic.c index 8e5c9a6..47b9cd1 100644 --- a/cpu/arm_cortexa8/mx6/generic.c +++ b/cpu/arm_cortexa8/mx6/generic.c @@ -37,6 +37,8 @@ #include #endif +#include + enum pll_clocks { CPU_PLL1, /* System PLL */ BUS_PLL2, /* System Bus PLL*/ @@ -889,8 +891,62 @@ int otp_clk_disable(void) return 0; } -#ifdef CONFIG_CMD_IMX_DOWNLOAD_MODE +#ifdef CONFIG_IMX_UDC +void enable_usboh3_clk(unsigned char enable) +{ + unsigned int reg; + reg = readl(MXC_CCM_CCGR6); + if (enable) + reg |= 1 << MXC_CCM_CCGR6_CG0_OFFSET; + else + reg &= ~(1 << MXC_CCM_CCGR6_CG0_OFFSET); + writel(reg, MXC_CCM_CCGR2); +} + +void enable_usb_phy1_clk(unsigned char enable) +{ + if (enable) { + writel(BM_USBPHY_CTRL_CLKGATE, USB_PHY0_BASE_ADDR + HW_USBPHY_CTRL_CLR); + } else { + writel(BM_USBPHY_CTRL_CLKGATE, USB_PHY0_BASE_ADDR + HW_USBPHY_CTRL_SET); + } +} + +void reset_usb_phy1() +{ + /* Reset USBPHY module */ + u32 temp; + temp = readl(USB_PHY0_BASE_ADDR + HW_USBPHY_CTRL); + temp |= BM_USBPHY_CTRL_SFTRST; + writel(temp, USB_PHY0_BASE_ADDR + HW_USBPHY_CTRL); + udelay(10); + /* Remove CLKGATE and SFTRST */ + temp = readl(USB_PHY0_BASE_ADDR + HW_USBPHY_CTRL); + temp &= ~(BM_USBPHY_CTRL_CLKGATE | BM_USBPHY_CTRL_SFTRST); + writel(temp, USB_PHY0_BASE_ADDR + HW_USBPHY_CTRL); + udelay(10); + + /* Power up the PHY */ + writel(0, USB_PHY0_BASE_ADDR + HW_USBPHY_PWD); +} + +void set_usb_phy1_clk(void) +{ + /* make sure pll3 is enable here */ + REG_SET(ANATOP_BASE_ADDR, HW_ANADIG_USB1_CHRG_DETECT, + BM_ANADIG_USB1_CHRG_DETECT_EN_B | BM_ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); + REG_SET(ANATOP_BASE_ADDR, HW_ANADIG_USB1_PLL_480_CTRL, + BM_ANADIG_USB1_PLL_480_CTRL_EN_USB_CLKS); +} + +void set_usboh3_clk(void) +{ + udc_pins_setting(); +} +#endif + +#ifdef CONFIG_CMD_IMX_DOWNLOAD_MODE #define PERSIST_WATCHDOG_RESET_BOOT (0x10000000) /*BOOT_CFG1[7..4] = 0x3 Boot from Serial ROM (I2C/SPI)*/ #define BOOT_MODE_SERIAL_ROM (0x00000030) diff --git a/cpu/arm_cortexa8/mx6/iomux-v3.c b/cpu/arm_cortexa8/mx6/iomux-v3.c index 4f31567..fbd738f 100644 --- a/cpu/arm_cortexa8/mx6/iomux-v3.c +++ b/cpu/arm_cortexa8/mx6/iomux-v3.c @@ -69,6 +69,20 @@ int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count) return 0; } +void mxc_iomux_set_gpr_register(int group, int start_bit, int num_bits, int value) +{ + int i = 0; + u32 reg; + reg = readl(base + group * 4); + while (num_bits) { + reg &= ~(1<<(start_bit + i)); + i++; + num_bits--; + } + reg |= (value << start_bit); + writel(reg, base + group * 4); +} + void mxc_iomux_v3_init(void *iomux_v3_base) { base = iomux_v3_base; diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 2761fdd..9f1f492 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -33,6 +33,7 @@ #include #include #include + #include "ep0.h" #ifdef DEBUG @@ -130,7 +131,6 @@ static int mxc_init_usb_qh(void) } memset(mxc_udc.ep_qh, 0, size); writel(mxc_udc.qh_dma & 0xfffff800, USB_ENDPOINTLISTADDR); - return 0; } @@ -453,6 +453,8 @@ static void usb_set_mode_device(void) temp &= ~USB_CMD_RUN_STOP; writel(temp, USB_USBCMD); + while (readl(USB_USBCMD) & USB_CMD_RUN_STOP) + ; /* Do core reset */ temp = readl(USB_USBCMD); temp |= USB_CMD_CTRL_RESET; @@ -461,6 +463,9 @@ static void usb_set_mode_device(void) ; DBG("DOORE RESET END\n"); +#ifdef CONFIG_MX6Q + reset_usb_phy1(); +#endif DBG("init core to device mode\n"); temp = readl(USB_USBMODE); temp &= ~USB_MODE_CTRL_MODE_MASK; /* clear mode bits */ @@ -474,7 +479,7 @@ static void usb_set_mode_device(void) static void usb_init_eps(void) { u32 temp; - + DBG("Flush begin\n"); temp = readl(USB_ENDPTNAKEN); temp |= 0x10001; /* clear mode bits */ writel(temp, USB_ENDPTNAKEN); @@ -789,6 +794,14 @@ void mxc_udc_wait_cable_insert(void) } while (1); } +int udc_disable_over_current() +{ + u32 temp; + temp = readl(USB_OTG_CTRL); + temp |= UCTRL_OVER_CUR_POL; + writel(temp, USB_OTG_CTRL); +} + /* * mxc_udc_init function */ @@ -797,6 +810,9 @@ int mxc_udc_init(void) set_usboh3_clk(); set_usb_phy1_clk(); enable_usboh3_clk(1); +#ifdef CONFIG_MX6Q + udc_disable_over_current(); +#endif enable_usb_phy1_clk(1); usb_udc_init(); diff --git a/include/asm-arm/arch-mx6/iomux-v3.h b/include/asm-arm/arch-mx6/iomux-v3.h index 01aeaeb..750cb61 100644 --- a/include/asm-arm/arch-mx6/iomux-v3.h +++ b/include/asm-arm/arch-mx6/iomux-v3.h @@ -140,6 +140,11 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad); int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count); /* + * Set bits for general purpose registers + */ +void mxc_iomux_set_gpr_register(int group, int start_bit, int num_bits, int value); + +/* * Initialise the iomux controller */ void mxc_iomux_v3_init(void *iomux_v3_base); diff --git a/include/asm-arm/arch-mx6/mx6.h b/include/asm-arm/arch-mx6/mx6.h index e7f06fc..81edff6 100644 --- a/include/asm-arm/arch-mx6/mx6.h +++ b/include/asm-arm/arch-mx6/mx6.h @@ -218,6 +218,8 @@ #define WDOG2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x40000) #define CCM_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x44000) #define ANATOP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x48000) +#define USB_PHY0_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x49000) +#define USB_PHY1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x4A000) #define SNVS_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x4C000) #define EPIT1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x50000) #define EPIT2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x54000) diff --git a/include/asm-arm/arch-mx6/mx6_pins.h b/include/asm-arm/arch-mx6/mx6_pins.h index 97931b5..50fd6f5 100644 --- a/include/asm-arm/arch-mx6/mx6_pins.h +++ b/include/asm-arm/arch-mx6/mx6_pins.h @@ -2251,6 +2251,8 @@ typedef enum iomux_config { IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0) #define _MX6Q_PAD_GPIO_1__KPP_ROW_5 \ IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0) +#define MX6Q_PAD_GPIO_1__USBOTG_ID \ + IOMUX_PAD(0x05F4, 0x0224, 3, 0x0000, 0, MX6Q_USDHC_PAD_CTRL) #define _MX6Q_PAD_GPIO_1__PWM2_PWMO \ IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0) #define _MX6Q_PAD_GPIO_1__GPIO_1_1 \ diff --git a/include/usb/imx_udc.h b/include/usb/imx_udc.h index 039d480..ca751ff 100644 --- a/include/usb/imx_udc.h +++ b/include/usb/imx_udc.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -28,6 +28,22 @@ #ifndef _IMX_UDC_H_ #define _IMX_UDC_H_ +#include + +#define USB_OTGREGS_BASE (OTG_BASE_ADDR + 0x000) +#define USB_H1REGS_BASE (OTG_BASE_ADDR + 0x200) +#define USB_H2REGS_BASE (OTG_BASE_ADDR + 0x400) +#if (defined CONFIG_MX6Q || defined CONFIG_MX53 || defined CONFIG_MX51 || CONFIG_MX50) +#define USB_H3REGS_BASE (OTG_BASE_ADDR + 0x600) +#define USB_OTHERREGS_BASE (OTG_BASE_ADDR + 0x800) +#else +#define USB_OTHERREGS_BASE (OTG_BASE_ADDR + 0x600) +#endif + +#define USBOTG_REG32(offset) (USB_OTGREGS_BASE + (offset)) +#define USBOTG_REG16(offset) (USB_OTGREGS_BASE + (offset)) +#define USBOTHER_REG(offset) (USB_OTHERREGS_BASE + (offset)) + #define USB_ID (OTG_BASE_ADDR + 0x0000) #define USB_HWGENERAL (OTG_BASE_ADDR + 0x0004) #define USB_HWHOST (OTG_BASE_ADDR + 0x0008) @@ -63,6 +79,36 @@ #define USB_ENDPTCOMPLETE (OTG_BASE_ADDR + 0x01BC) #define USB_ENDPTCTRL(n) (OTG_BASE_ADDR + 0x01C0 + (4 * (n))) +/* + * other regs (not part of ARC core) + */ +#define USBCTRL USBOTHER_REG(0x00) /* USB Control register */ +#define USB_OTG_MIRROR USBOTHER_REG(0x04) /* USB OTG mirror register */ +#define USB_PHY_CTR_FUNC USBOTHER_REG(0x08) /* OTG UTMI PHY Function Control register */ +#define USB_PHY_CTR_FUNC2 USBOTHER_REG(0x0c) /* OTG UTMI PHY Function Control register */ +#define USB_CTRL_1 USBOTHER_REG(0x10) /* USB Cotrol Register 1*/ +#define USBCTRL_HOST2 USBOTHER_REG(0x14) /* USB Cotrol Register 1*/ +#define USBCTRL_HOST3 USBOTHER_REG(0x18) /* USB Cotrol Register 1*/ +#define USBH1_PHY_CTRL0 USBOTHER_REG(0x1c) /* USB Cotrol Register 1*/ +#define USBH1_PHY_CTRL1 USBOTHER_REG(0x20) /* USB Cotrol Register 1*/ +#define USB_CLKONOFF_CTRL USBOTHER_REG(0x24) /* USB Clock on/off Control Register */ +/* mx6x other regs */ +#define USB_OTG_CTRL USBOTHER_REG(0x00) /* USB OTG Control register */ +#define USB_H1_CTRL USBOTHER_REG(0x04) /* USB H1 Control register */ +#define USB_H2_CTRL USBOTHER_REG(0x08) /* USB H2 Control register */ +#define USB_H3_CTRL USBOTHER_REG(0x0c) /* USB H3 Control register */ +#define USB_UH2_HSIC_CTRL USBOTHER_REG(0x10) /* USB Host2 HSIC Control Register */ +#define USB_UH3_HSIC_CTRL USBOTHER_REG(0x14) /* USB Host3 HSIC Control Register */ +#define USB_OTG_PHY_CTRL_0 USBOTHER_REG(0x18) /* OTG UTMI PHY Control 0 Register */ +#define USB_H1_PHY_CTRL_0 USBOTHER_REG(0x1c) /* OTG UTMI PHY Control 1 Register */ +#define USB_UH2_HSIC_DLL_CFG1 USBOTHER_REG(0x20) /* USB Host2 HSIC DLL Configuration Register 1 */ +#define USB_UH2_HSIC_DLL_CFG2 USBOTHER_REG(0x24) /* USB Host2 HSIC DLL Configuration Register 2 */ +#define USB_UH2_HSIC_DLL_CFG3 USBOTHER_REG(0x28) /* USB Host2 HSIC DLL Configuration Register 3 */ +#define USB_UH3_HSIC_DLL_CFG1 USBOTHER_REG(0x30) /* USB Host3 HSIC DLL Configuration Register 1 */ +#define USB_UH3_HSIC_DLL_CFG2 USBOTHER_REG(0x34) /* USB Host3 HSIC DLL Configuration Register 2 */ +#define USB_UH3_HSIC_DLL_CFG3 USBOTHER_REG(0x38) /* USB Host3 HSIC DLL Configuration Register 3 */ + + #define USB_PHY1_CTRL (OTG_BASE_ADDR + 0x80C) #define USBCMD_RESET 2 #define USBCMD_ATTACH 1 @@ -396,6 +442,33 @@ struct ep_queue_item { #define UDC_INT_PACKET_SIZE USB_MAX_CTRL_PAYLOAD #define UDC_BULK_PACKET_SIZE USB_MAX_CTRL_PAYLOAD +/* mx6q's register bit begins*/ + +/* OTG CTRL - H3 CTRL */ +#define UCTRL_OWIR (1 << 31) /* OTG wakeup intr request received */ +/* bit 18 - bit 30 is reserved at mx6q */ +#define UCTRL_WKUP_VBUS_EN (1 << 17) /* OTG wake-up on VBUS change enable */ +#define UCTRL_WKUP_ID_EN (1 << 16) /* OTG wake-up on ID change enable */ +#define UCTRL_WKUP_SW (1 << 15) /* OTG Software Wake-up */ +#define UCTRL_WKUP_SW_EN (1 << 14) /* OTG Software Wake-up enable */ +#define UCTRL_UTMI_ON_CLOCK (1 << 13) /* Force OTG UTMI PHY clock output on even if suspend mode */ +#define UCTRL_SUSPENDM (1 << 12) /* Force OTG UTMI PHY Suspend */ +#define UCTRL_RESET (1 << 11) /* Force OTG UTMI PHY Reset */ +#define UCTRL_OWIE (1 << 10) /* OTG wakeup intr request received */ +#define UCTRL_PM (1 << 9) /* OTG Power Mask */ +#define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */ +#define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */ +/* bit 0 - bit 6 is reserved at mx6q */ + +/* Host2/3 HSIC Ctrl */ +#define CLK_VLD (1 << 31) /* Indicating whether HSIC clock is valid */ +#define HSIC_EN (1 << 12) /* HSIC enable */ +#define HSIC_CLK_ON (1 << 11) /* Force HSIC module 480M clock on, + * even when in Host is in suspend mode + */ +/* OTG/HOST1 Phy Ctrl */ +#define PHY_UTMI_CLK_VLD (1 << 31) /* Indicating whether OTG UTMI PHY Clock Valida */ + int udc_init(void); void udc_enable(struct usb_device_instance *device); diff --git a/include/usb/regs-usbphy-mx6.h b/include/usb/regs-usbphy-mx6.h new file mode 100644 index 0000000..060b176 --- /dev/null +++ b/include/usb/regs-usbphy-mx6.h @@ -0,0 +1,479 @@ +/* + * Freescale USBPHY Register Definitions + * + * Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file is created by xml file. Don't Edit it. + * + * Xml Revision: 1.2 + * Template revision: 1.3 + */ + +#ifndef __ARCH_ARM___USBPHY_H +#define __ARCH_ARM___USBPHY_H + + +#define HW_USBPHY_PWD (0x00000000) +#define HW_USBPHY_PWD_SET (0x00000004) +#define HW_USBPHY_PWD_CLR (0x00000008) +#define HW_USBPHY_PWD_TOG (0x0000000c) + +#define BP_USBPHY_PWD_RSVD2 21 +#define BM_USBPHY_PWD_RSVD2 0xFFE00000 +#define BF_USBPHY_PWD_RSVD2(v) \ + (((v) << 21) & BM_USBPHY_PWD_RSVD2) +#define BM_USBPHY_PWD_RXPWDRX 0x00100000 +#define BM_USBPHY_PWD_RXPWDDIFF 0x00080000 +#define BM_USBPHY_PWD_RXPWD1PT1 0x00040000 +#define BM_USBPHY_PWD_RXPWDENV 0x00020000 +#define BP_USBPHY_PWD_RSVD1 13 +#define BM_USBPHY_PWD_RSVD1 0x0001E000 +#define BF_USBPHY_PWD_RSVD1(v) \ + (((v) << 13) & BM_USBPHY_PWD_RSVD1) +#define BM_USBPHY_PWD_TXPWDV2I 0x00001000 +#define BM_USBPHY_PWD_TXPWDIBIAS 0x00000800 +#define BM_USBPHY_PWD_TXPWDFS 0x00000400 +#define BP_USBPHY_PWD_RSVD0 0 +#define BM_USBPHY_PWD_RSVD0 0x000003FF +#define BF_USBPHY_PWD_RSVD0(v) \ + (((v) << 0) & BM_USBPHY_PWD_RSVD0) + +#define HW_USBPHY_TX (0x00000010) +#define HW_USBPHY_TX_SET (0x00000014) +#define HW_USBPHY_TX_CLR (0x00000018) +#define HW_USBPHY_TX_TOG (0x0000001c) + +#define BP_USBPHY_TX_RSVD5 29 +#define BM_USBPHY_TX_RSVD5 0xE0000000 +#define BF_USBPHY_TX_RSVD5(v) \ + (((v) << 29) & BM_USBPHY_TX_RSVD5) +#define BP_USBPHY_TX_USBPHY_TX_EDGECTRL 26 +#define BM_USBPHY_TX_USBPHY_TX_EDGECTRL 0x1C000000 +#define BF_USBPHY_TX_USBPHY_TX_EDGECTRL(v) \ + (((v) << 26) & BM_USBPHY_TX_USBPHY_TX_EDGECTRL) +#define BM_USBPHY_TX_USBPHY_TX_SYNC_INVERT 0x02000000 +#define BM_USBPHY_TX_USBPHY_TX_SYNC_MUX 0x01000000 +#define BP_USBPHY_TX_RSVD4 22 +#define BM_USBPHY_TX_RSVD4 0x00C00000 +#define BF_USBPHY_TX_RSVD4(v) \ + (((v) << 22) & BM_USBPHY_TX_RSVD4) +#define BM_USBPHY_TX_TXENCAL45DP 0x00200000 +#define BM_USBPHY_TX_RSVD3 0x00100000 +#define BP_USBPHY_TX_TXCAL45DP 16 +#define BM_USBPHY_TX_TXCAL45DP 0x000F0000 +#define BF_USBPHY_TX_TXCAL45DP(v) \ + (((v) << 16) & BM_USBPHY_TX_TXCAL45DP) +#define BP_USBPHY_TX_RSVD2 14 +#define BM_USBPHY_TX_RSVD2 0x0000C000 +#define BF_USBPHY_TX_RSVD2(v) \ + (((v) << 14) & BM_USBPHY_TX_RSVD2) +#define BM_USBPHY_TX_TXENCAL45DN 0x00002000 +#define BM_USBPHY_TX_RSVD1 0x00001000 +#define BP_USBPHY_TX_TXCAL45DN 8 +#define BM_USBPHY_TX_TXCAL45DN 0x00000F00 +#define BF_USBPHY_TX_TXCAL45DN(v) \ + (((v) << 8) & BM_USBPHY_TX_TXCAL45DN) +#define BP_USBPHY_TX_RSVD0 4 +#define BM_USBPHY_TX_RSVD0 0x000000F0 +#define BF_USBPHY_TX_RSVD0(v) \ + (((v) << 4) & BM_USBPHY_TX_RSVD0) +#define BP_USBPHY_TX_D_CAL 0 +#define BM_USBPHY_TX_D_CAL 0x0000000F +#define BF_USBPHY_TX_D_CAL(v) \ + (((v) << 0) & BM_USBPHY_TX_D_CAL) + +#define HW_USBPHY_RX (0x00000020) +#define HW_USBPHY_RX_SET (0x00000024) +#define HW_USBPHY_RX_CLR (0x00000028) +#define HW_USBPHY_RX_TOG (0x0000002c) + +#define BP_USBPHY_RX_RSVD2 23 +#define BM_USBPHY_RX_RSVD2 0xFF800000 +#define BF_USBPHY_RX_RSVD2(v) \ + (((v) << 23) & BM_USBPHY_RX_RSVD2) +#define BM_USBPHY_RX_RXDBYPASS 0x00400000 +#define BP_USBPHY_RX_RSVD1 7 +#define BM_USBPHY_RX_RSVD1 0x003FFF80 +#define BF_USBPHY_RX_RSVD1(v) \ + (((v) << 7) & BM_USBPHY_RX_RSVD1) +#define BP_USBPHY_RX_DISCONADJ 4 +#define BM_USBPHY_RX_DISCONADJ 0x00000070 +#define BF_USBPHY_RX_DISCONADJ(v) \ + (((v) << 4) & BM_USBPHY_RX_DISCONADJ) +#define BM_USBPHY_RX_RSVD0 0x00000008 +#define BP_USBPHY_RX_ENVADJ 0 +#define BM_USBPHY_RX_ENVADJ 0x00000007 +#define BF_USBPHY_RX_ENVADJ(v) \ + (((v) << 0) & BM_USBPHY_RX_ENVADJ) + +#define HW_USBPHY_CTRL (0x00000030) +#define HW_USBPHY_CTRL_SET (0x00000034) +#define HW_USBPHY_CTRL_CLR (0x00000038) +#define HW_USBPHY_CTRL_TOG (0x0000003c) + +#define BM_USBPHY_CTRL_SFTRST 0x80000000 +#define BM_USBPHY_CTRL_CLKGATE 0x40000000 +#define BM_USBPHY_CTRL_UTMI_SUSPENDM 0x20000000 +#define BM_USBPHY_CTRL_HOST_FORCE_LS_SE0 0x10000000 +#define BM_USBPHY_CTRL_OTG_ID_VALUE 0x08000000 +#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS 0x04000000 +#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE 0x02000000 +#define BM_USBPHY_CTRL_FSDLL_RST_EN 0x01000000 +#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP 0x00800000 +#define BM_USBPHY_CTRL_ENIDCHG_WKUP 0x00400000 +#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP 0x00200000 +#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD 0x00100000 +#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE 0x00080000 +#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL 0x00040000 +#define BM_USBPHY_CTRL_WAKEUP_IRQ 0x00020000 +#define BM_USBPHY_CTRL_ENIRQWAKEUP 0x00010000 +#define BM_USBPHY_CTRL_ENUTMILEVEL3 0x00008000 +#define BM_USBPHY_CTRL_ENUTMILEVEL2 0x00004000 +#define BM_USBPHY_CTRL_DATA_ON_LRADC 0x00002000 +#define BM_USBPHY_CTRL_DEVPLUGIN_IRQ 0x00001000 +#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800 +#define BM_USBPHY_CTRL_RESUME_IRQ 0x00000400 +#define BM_USBPHY_CTRL_ENIRQRESUMEDETECT 0x00000200 +#define BM_USBPHY_CTRL_RESUMEIRQSTICKY 0x00000100 +#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080 +#define BM_USBPHY_CTRL_OTG_ID_CHG_IRQ 0x00000040 +#define BM_USBPHY_CTRL_DEVPLUGIN_POLARITY 0x00000020 +#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010 +#define BM_USBPHY_CTRL_HOSTDISCONDETECT_IRQ 0x00000008 +#define BM_USBPHY_CTRL_ENIRQHOSTDISCON 0x00000004 +#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002 +#define BM_USBPHY_CTRL_ENOTG_ID_CHG_IRQ 0x00000001 + +#define HW_USBPHY_STATUS (0x00000040) + +#define BP_USBPHY_STATUS_RSVD4 11 +#define BM_USBPHY_STATUS_RSVD4 0xFFFFF800 +#define BF_USBPHY_STATUS_RSVD4(v) \ + (((v) << 11) & BM_USBPHY_STATUS_RSVD4) +#define BM_USBPHY_STATUS_RESUME_STATUS 0x00000400 +#define BM_USBPHY_STATUS_RSVD3 0x00000200 +#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100 +#define BM_USBPHY_STATUS_RSVD2 0x00000080 +#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040 +#define BP_USBPHY_STATUS_RSVD1 4 +#define BM_USBPHY_STATUS_RSVD1 0x00000030 +#define BF_USBPHY_STATUS_RSVD1(v) \ + (((v) << 4) & BM_USBPHY_STATUS_RSVD1) +#define BM_USBPHY_STATUS_HOSTDISCONDETECT_STATUS 0x00000008 +#define BP_USBPHY_STATUS_RSVD0 0 +#define BM_USBPHY_STATUS_RSVD0 0x00000007 +#define BF_USBPHY_STATUS_RSVD0(v) \ + (((v) << 0) & BM_USBPHY_STATUS_RSVD0) + +#define HW_USBPHY_DEBUG (0x00000050) +#define HW_USBPHY_DEBUG_SET (0x00000054) +#define HW_USBPHY_DEBUG_CLR (0x00000058) +#define HW_USBPHY_DEBUG_TOG (0x0000005c) + +#define BM_USBPHY_DEBUG_RSVD3 0x80000000 +#define BM_USBPHY_DEBUG_CLKGATE 0x40000000 +#define BM_USBPHY_DEBUG_HOST_RESUME_DEBUG 0x20000000 +#define BP_USBPHY_DEBUG_SQUELCHRESETLENGTH 25 +#define BM_USBPHY_DEBUG_SQUELCHRESETLENGTH 0x1E000000 +#define BF_USBPHY_DEBUG_SQUELCHRESETLENGTH(v) \ + (((v) << 25) & BM_USBPHY_DEBUG_SQUELCHRESETLENGTH) +#define BM_USBPHY_DEBUG_ENSQUELCHRESET 0x01000000 +#define BP_USBPHY_DEBUG_RSVD2 21 +#define BM_USBPHY_DEBUG_RSVD2 0x00E00000 +#define BF_USBPHY_DEBUG_RSVD2(v) \ + (((v) << 21) & BM_USBPHY_DEBUG_RSVD2) +#define BP_USBPHY_DEBUG_SQUELCHRESETCOUNT 16 +#define BM_USBPHY_DEBUG_SQUELCHRESETCOUNT 0x001F0000 +#define BF_USBPHY_DEBUG_SQUELCHRESETCOUNT(v) \ + (((v) << 16) & BM_USBPHY_DEBUG_SQUELCHRESETCOUNT) +#define BP_USBPHY_DEBUG_RSVD1 13 +#define BM_USBPHY_DEBUG_RSVD1 0x0000E000 +#define BF_USBPHY_DEBUG_RSVD1(v) \ + (((v) << 13) & BM_USBPHY_DEBUG_RSVD1) +#define BM_USBPHY_DEBUG_ENTX2RXCOUNT 0x00001000 +#define BP_USBPHY_DEBUG_TX2RXCOUNT 8 +#define BM_USBPHY_DEBUG_TX2RXCOUNT 0x00000F00 +#define BF_USBPHY_DEBUG_TX2RXCOUNT(v) \ + (((v) << 8) & BM_USBPHY_DEBUG_TX2RXCOUNT) +#define BP_USBPHY_DEBUG_RSVD0 6 +#define BM_USBPHY_DEBUG_RSVD0 0x000000C0 +#define BF_USBPHY_DEBUG_RSVD0(v) \ + (((v) << 6) & BM_USBPHY_DEBUG_RSVD0) +#define BP_USBPHY_DEBUG_ENHSTPULLDOWN 4 +#define BM_USBPHY_DEBUG_ENHSTPULLDOWN 0x00000030 +#define BF_USBPHY_DEBUG_ENHSTPULLDOWN(v) \ + (((v) << 4) & BM_USBPHY_DEBUG_ENHSTPULLDOWN) +#define BP_USBPHY_DEBUG_HSTPULLDOWN 2 +#define BM_USBPHY_DEBUG_HSTPULLDOWN 0x0000000C +#define BF_USBPHY_DEBUG_HSTPULLDOWN(v) \ + (((v) << 2) & BM_USBPHY_DEBUG_HSTPULLDOWN) +#define BM_USBPHY_DEBUG_DEBUG_INTERFACE_HOLD 0x00000002 +#define BM_USBPHY_DEBUG_OTGIDPIOLOCK 0x00000001 + +#define HW_USBPHY_DEBUG0_STATUS (0x00000060) + +#define BP_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT 26 +#define BM_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT 0xFC000000 +#define BF_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT(v) \ + (((v) << 26) & BM_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT) +#define BP_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT 16 +#define BM_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT 0x03FF0000 +#define BF_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT(v) \ + (((v) << 16) & BM_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT) +#define BP_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT 0 +#define BM_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT 0x0000FFFF +#define BF_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT(v) \ + (((v) << 0) & BM_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT) + +#define HW_USBPHY_DEBUG1 (0x00000070) +#define HW_USBPHY_DEBUG1_SET (0x00000074) +#define HW_USBPHY_DEBUG1_CLR (0x00000078) +#define HW_USBPHY_DEBUG1_TOG (0x0000007c) + +#define BP_USBPHY_DEBUG1_RSVD1 15 +#define BM_USBPHY_DEBUG1_RSVD1 0xFFFF8000 +#define BF_USBPHY_DEBUG1_RSVD1(v) \ + (((v) << 15) & BM_USBPHY_DEBUG1_RSVD1) +#define BP_USBPHY_DEBUG1_ENTAILADJVD 13 +#define BM_USBPHY_DEBUG1_ENTAILADJVD 0x00006000 +#define BF_USBPHY_DEBUG1_ENTAILADJVD(v) \ + (((v) << 13) & BM_USBPHY_DEBUG1_ENTAILADJVD) +#define BM_USBPHY_DEBUG1_ENTX2TX 0x00001000 +#define BP_USBPHY_DEBUG1_RSVD0 4 +#define BM_USBPHY_DEBUG1_RSVD0 0x00000FF0 +#define BF_USBPHY_DEBUG1_RSVD0(v) \ + (((v) << 4) & BM_USBPHY_DEBUG1_RSVD0) +#define BP_USBPHY_DEBUG1_DBG_ADDRESS 0 +#define BM_USBPHY_DEBUG1_DBG_ADDRESS 0x0000000F +#define BF_USBPHY_DEBUG1_DBG_ADDRESS(v) \ + (((v) << 0) & BM_USBPHY_DEBUG1_DBG_ADDRESS) + +#define HW_USBPHY_VERSION (0x00000080) + +#define BP_USBPHY_VERSION_MAJOR 24 +#define BM_USBPHY_VERSION_MAJOR 0xFF000000 +#define BF_USBPHY_VERSION_MAJOR(v) \ + (((v) << 24) & BM_USBPHY_VERSION_MAJOR) +#define BP_USBPHY_VERSION_MINOR 16 +#define BM_USBPHY_VERSION_MINOR 0x00FF0000 +#define BF_USBPHY_VERSION_MINOR(v) \ + (((v) << 16) & BM_USBPHY_VERSION_MINOR) +#define BP_USBPHY_VERSION_STEP 0 +#define BM_USBPHY_VERSION_STEP 0x0000FFFF +#define BF_USBPHY_VERSION_STEP(v) \ + (((v) << 0) & BM_USBPHY_VERSION_STEP) + +#define HW_USBPHY_IP (0x00000090) +#define HW_USBPHY_IP_SET (0x00000094) +#define HW_USBPHY_IP_CLR (0x00000098) +#define HW_USBPHY_IP_TOG (0x0000009c) + +#define BP_USBPHY_IP_RSVD1 25 +#define BM_USBPHY_IP_RSVD1 0xFE000000 +#define BF_USBPHY_IP_RSVD1(v) \ + (((v) << 25) & BM_USBPHY_IP_RSVD1) +#define BP_USBPHY_IP_DIV_SEL 23 +#define BM_USBPHY_IP_DIV_SEL 0x01800000 +#define BF_USBPHY_IP_DIV_SEL(v) \ + (((v) << 23) & BM_USBPHY_IP_DIV_SEL) +#define BV_USBPHY_IP_DIV_SEL__DEFAULT 0x0 +#define BV_USBPHY_IP_DIV_SEL__LOWER 0x1 +#define BV_USBPHY_IP_DIV_SEL__LOWEST 0x2 +#define BV_USBPHY_IP_DIV_SEL__UNDEFINED 0x3 +#define BP_USBPHY_IP_LFR_SEL 21 +#define BM_USBPHY_IP_LFR_SEL 0x00600000 +#define BF_USBPHY_IP_LFR_SEL(v) \ + (((v) << 21) & BM_USBPHY_IP_LFR_SEL) +#define BV_USBPHY_IP_LFR_SEL__DEFAULT 0x0 +#define BV_USBPHY_IP_LFR_SEL__TIMES_2 0x1 +#define BV_USBPHY_IP_LFR_SEL__TIMES_05 0x2 +#define BV_USBPHY_IP_LFR_SEL__UNDEFINED 0x3 +#define BP_USBPHY_IP_CP_SEL 19 +#define BM_USBPHY_IP_CP_SEL 0x00180000 +#define BF_USBPHY_IP_CP_SEL(v) \ + (((v) << 19) & BM_USBPHY_IP_CP_SEL) +#define BV_USBPHY_IP_CP_SEL__DEFAULT 0x0 +#define BV_USBPHY_IP_CP_SEL__TIMES_2 0x1 +#define BV_USBPHY_IP_CP_SEL__TIMES_05 0x2 +#define BV_USBPHY_IP_CP_SEL__UNDEFINED 0x3 +#define BM_USBPHY_IP_TSTI_TX_DP 0x00040000 +#define BM_USBPHY_IP_TSTI_TX_DM 0x00020000 +#define BM_USBPHY_IP_ANALOG_TESTMODE 0x00010000 +#define BP_USBPHY_IP_RSVD0 3 +#define BM_USBPHY_IP_RSVD0 0x0000FFF8 +#define BF_USBPHY_IP_RSVD0(v) \ + (((v) << 3) & BM_USBPHY_IP_RSVD0) +#define BM_USBPHY_IP_EN_USB_CLKS 0x00000004 +#define BM_USBPHY_IP_PLL_LOCKED 0x00000002 +#define BM_USBPHY_IP_PLL_POWER 0x00000001 + +/* The register definition for usbphy which includes at usb core's register set + * (from USB_CORE_BASE + 0x800) + */ +#define USB_CTRL USBOTHER_REG(0x00) /* USB OTG Control register */ +#define USB_H1_CTRL USBOTHER_REG(0x04) /* USB H1 Control register */ +#define USB_H2_CTRL USBOTHER_REG(0x08) /* USB H2 Control register */ +#define USB_H3_CTRL USBOTHER_REG(0x0c) /* USB H3 Control register */ +#define USB_UH2_HSIC_CTRL USBOTHER_REG(0x10) /* USB Host2 HSIC Control Register */ +#define USB_UH3_HSIC_CTRL USBOTHER_REG(0x14) /* USB Host3 HSIC Control Register */ +#define USB_OTG_PHY_CTRL_0 USBOTHER_REG(0x18) /* OTG UTMI PHY Control 0 Register */ +#define USB_H1_PHY_CTRL_0 USBOTHER_REG(0x1c) /* OTG UTMI PHY Control 1 Register */ +#define USB_UH2_HSIC_DLL_CFG1 USBOTHER_REG(0x20) /* USB Host2 HSIC DLL Configuration Register 1 */ +#define USB_UH2_HSIC_DLL_CFG2 USBOTHER_REG(0x24) /* USB Host2 HSIC DLL Configuration Register 2 */ +#define USB_UH2_HSIC_DLL_CFG3 USBOTHER_REG(0x28) /* USB Host2 HSIC DLL Configuration Register 3 */ +#define USB_UH3_HSIC_DLL_CFG1 USBOTHER_REG(0x30) /* USB Host3 HSIC DLL Configuration Register 1 */ +#define USB_UH3_HSIC_DLL_CFG2 USBOTHER_REG(0x34) /* USB Host3 HSIC DLL Configuration Register 2 */ +#define USB_UH3_HSIC_DLL_CFG3 USBOTHER_REG(0x38) /* USB Host3 HSIC DLL Configuration Register 3 */ + +/* + * register bits + */ + +/* USBCTRL */ +#define UCTRL_OSIC_MASK (3 << 29) /* OTG Serial Interface Config: */ +#define UCTRL_OSIC_DU6 (0 << 29) /* Differential/unidirectional 6 wire */ +#define UCTRL_OSIC_DB4 (1 << 29) /* Differential/bidirectional 4 wire */ +#define UCTRL_OSIC_SU6 (2 << 29) /* single-ended/unidirectional 6 wire */ +#define UCTRL_OSIC_SB3 (3 << 29) /* single-ended/bidirectional 3 wire */ +#define UCTRL_OUIE (1 << 28) /* OTG ULPI intr enable */ +#define UCTRL_OBPVAL_RXDP (1 << 26) /* OTG RxDp status in bypass mode */ +#define UCTRL_OBPVAL_RXDM (1 << 25) /* OTG RxDm status in bypass mode */ +#define UCTRL_OPM (1 << 24) /* OTG power mask */ +#define UCTRL_O_PWR_POL (1 << 24) /* OTG power pin polarity */ +#define UCTRL_H2WIR (1 << 17) /* HOST2 wakeup intr request received */ +#define UCTRL_H2SIC_MASK (3 << 21) /* HOST2 Serial Interface Config: */ +#define UCTRL_H2SIC_DU6 (0 << 21) /* Differential/unidirectional 6 wire */ +#define UCTRL_H2SIC_DB4 (1 << 21) /* Differential/bidirectional 4 wire */ +#define UCTRL_H2SIC_SU6 (2 << 21) /* single-ended/unidirectional 6 wire */ +#define UCTRL_H2SIC_SB3 (3 << 21) /* single-ended/bidirectional 3 wire */ +#define UCTRL_H2UIE (1 << 8) /* HOST2 ULPI intr enable */ +#define UCTRL_H2WIE (1 << 7) /* HOST2 wakeup intr enable */ +#define UCTRL_H2PP 0 /* Power Polarity for uh2 */ +#define UCTRL_H2PM (1 << 4) /* HOST2 power mask */ +#define UCTRL_H2OVBWK_EN (1 << 6) /* OTG VBUS Wakeup Enable */ +#define UCTRL_H2OIDWK_EN (1 << 5) /* OTG ID Wakeup Enable */ + +#define UCTRL_H1WIR (1 << 15) /* HOST1 wakeup intr request received */ +#define UCTRL_H1SIC_MASK (3 << 13) /* HOST1 Serial Interface Config: */ +#define UCTRL_H1SIC_DU6 (0 << 13) /* Differential/unidirectional 6 wire */ +#define UCTRL_H1SIC_DB4 (1 << 13) /* Differential/bidirectional 4 wire */ +#define UCTRL_H1SIC_SU6 (2 << 13) /* single-ended/unidirectional 6 wire */ +#define UCTRL_H1SIC_SB3 (3 << 13) /* single-ended/bidirectional 3 wire */ +#define UCTRL_OLOCKD (1 << 13) /* otg lock disable */ +#define UCTRL_H2LOCKD (1 << 12) /* HOST2 lock disable */ +#define UCTRL_H1UIE (1 << 12) /* Host1 ULPI interrupt enable */ + +#define UCTRL_PP (1 << 11) /* power polarity bit */ +#define UCTRL_H1WIE (1 << 11) /* HOST1 wakeup intr enable */ +#define UCTRL_H1BPVAL_RXDP (1 << 10) /* HOST1 RxDp status in bypass mode */ +#define UCTRL_XCSO (1 << 10) /* Xcvr Clock Select for OTG port */ +#define UCTRL_H1BPVAL_RXDM (1 << 9) /* HOST1 RxDm status in bypass mode */ +#define UCTRL_XCSH2 (1 << 9) /* Xcvr Clock Select for Host port */ +#define UCTRL_H1PM (1 << 8) /* HOST1 power mask */ +#define UCTRL_IP_PULIDP (1 << 8) /* Ipp_Puimpel_Pullup_Dp */ + +#define UCTRL_IP_PUE_UP (1 << 7) /* ipp_pue_pullup_dp */ +#define UCTRL_IP_PUE_DOWN (1 << 6) /* ipp_pue_pulldwn_dpdm */ +#define UCTRL_H2DT (1 << 5) /* HOST2 TLL disabled */ +#define UCTRL_H1DT (1 << 4) /* HOST1 TLL disabled */ +#define UCTRL_USBTE (1 << 4) /* USBT Transceiver enable */ +#define UCTRL_OCPOL (1 << 3) /* OverCurrent Polarity */ +#define UCTRL_OCE (1 << 2) /* OverCurrent Enable */ +#define UCTRL_H2OCPOL (1 << 2) /* OverCurrent Polarity of Host2 */ +#define UCTRL_H2OCS (1 << 1) /* Host OverCurrent State */ +#define UCTRL_BPE (1 << 0) /* bypass mode enable */ +#define UCTRL_OTD (1 << 0) /* OTG TLL Disable */ +#define UCTRL_OOCS (1 << 0) /* OTG OverCurrent State */ + +/* OTG_MIRROR */ +#define OTGM_SESEND (1 << 4) /* B device session end */ +#define OTGM_VBUSVAL (1 << 3) /* Vbus valid */ +#define OTGM_BSESVLD (1 << 2) /* B session Valid */ +#define OTGM_ASESVLD (1 << 1) /* A session Valid */ +#define OTGM_IDIDG (1 << 0) /* OTG ID pin status */ + /* 1=high: Operate as B-device */ + /* 0=low : Operate as A-device */ + +/* USB_PHY_CTRL_FUNC */ +/* PHY control0 Register Bit Masks */ +#define USB_UTMI_PHYCTRL_CONF2 (1 << 26) + +#define USB_UTMI_PHYCTRL_UTMI_ENABLE (1 << 24) +#define USB_UTMI_PHYCTRL_CHGRDETEN (1 << 24) /* Enable Charger Detector */ +#define USB_UTMI_PHYCTRL_CHGRDETON (1 << 23) /* Charger Detector Power On Control */ +#define USB_UTMI_PHYCTRL_OC_POL (1 << 9) /* OTG Polarity of Overcurrent */ +#define USB_UTMI_PHYCTRL_OC_DIS (1 << 8) /* OTG Disable Overcurrent Event */ +#define USB_UH1_OC_DIS (1 << 5) /* UH1 Disable Overcurrent Event */ +#define USB_UH1_OC_POL (1 << 6) /* UH1 Polarity of OC,Low active */ +/* USB_PHY_CTRL_FUNC2*/ +#define USB_UTMI_PHYCTRL2_PLLDIV_MASK 0x3 +#define USB_UTMI_PHYCTRL2_PLLDIV_SHIFT 0 +#define USB_UTMI_PHYCTRL2_HSDEVSEL_MASK 0x3 +#define USB_UTMI_PHYCTRL2_HSDEVSEL_SHIFT 19 + +/* USB_CTRL_1 */ +#define USB_CTRL_UH1_EXT_CLK_EN (1 << 25) +#define USB_CTRL_UH2_EXT_CLK_EN (1 << 26) +#define USB_CTRL_UH2_CLK_FROM_ULPI_PHY (1 << 2) +/* ULPIVIEW register bits */ +#define ULPIVW_OFF (0x170) +#define ULPIVW_WU (1 << 31) /* Wakeup */ +#define ULPIVW_RUN (1 << 30) /* read/write run */ +#define ULPIVW_WRITE (1 << 29) /* 0=read 1=write */ +#define ULPIVW_SS (1 << 27) /* SyncState */ +#define ULPIVW_PORT_MASK 0x07 /* Port field */ +#define ULPIVW_PORT_SHIFT 24 +#define ULPIVW_ADDR_MASK 0xFF /* data address field */ +#define ULPIVW_ADDR_SHIFT 16 +#define ULPIVW_RDATA_MASK 0xFF /* read data field */ +#define ULPIVW_RDATA_SHIFT 8 +#define ULPIVW_WDATA_MASK 0xFF /* write data field */ +#define ULPIVW_WDATA_SHIFT 0 + +/* USB Clock on/off Control Register */ +#define OTG_AHBCLK_OFF (0x1<<17) /* 1: OFF */ +#define H1_AHBCLK_OFF (0x1<<18) /* 1: OFF */ + +/* mx6q's register bit begins*/ + +/* OTG CTRL - H3 CTRL */ +#define UCTRL_OWIR (1 << 31) /* OTG wakeup intr request received */ +/* bit 18 - bit 30 is reserved at mx6q */ +#define UCTRL_WKUP_VBUS_EN (1 << 17) /* OTG wake-up on VBUS change enable */ +#define UCTRL_WKUP_ID_EN (1 << 16) /* OTG wake-up on ID change enable */ +#define UCTRL_WKUP_SW (1 << 15) /* OTG Software Wake-up */ +#define UCTRL_WKUP_SW_EN (1 << 14) /* OTG Software Wake-up enable */ +#define UCTRL_UTMI_ON_CLOCK (1 << 13) /* Force OTG UTMI PHY clock output on even if suspend mode */ +#define UCTRL_SUSPENDM (1 << 12) /* Force OTG UTMI PHY Suspend */ +#define UCTRL_RESET (1 << 11) /* Force OTG UTMI PHY Reset */ +#define UCTRL_OWIE (1 << 10) /* OTG wakeup intr request received */ +#define UCTRL_PM (1 << 9) /* OTG Power Mask */ +#define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */ +#define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */ +/* bit 0 - bit 6 is reserved at mx6q */ + +/* Host2/3 HSIC Ctrl */ +#define CLK_VLD (1 << 31) /* Indicating whether HSIC clock is valid */ +#define HSIC_EN (1 << 12) /* HSIC enable */ +#define HSIC_CLK_ON (1 << 11) /* Force HSIC module 480M clock on, + * even when in Host is in suspend mode + */ +/* OTG/HOST1 Phy Ctrl */ +#define PHY_UTMI_CLK_VLD (1 << 31) /* Indicating whether OTG UTMI PHY Clock Valida */ + +#define NOP_XCVR (0xffffffff) /* Indicate it is no usb phy */ +#endif /* __ARCH_ARM___USBPHY_H */ -- cgit v1.1