From 6b06d7dc071a41e7c9d34447a18acdf53c6bdc4f Mon Sep 17 00:00:00 2001 From: York Sun Date: Mon, 10 Jan 2011 12:03:02 +0000 Subject: corenet_ds: Extend board specific parameters Extend board specific parameters to include cpo, write leveling override Extend write leveling sample to 0xf Adding rcw overrid for quad-rank RDIMMs Signed-off-by: York Sun Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/fsl_ddr_sdram.h | 3 + board/freescale/corenet_ds/ddr.c | 159 ++++++++++++++++--------------- 2 files changed, 84 insertions(+), 78 deletions(-) diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index e6f0d32..852e5c3 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -120,6 +120,9 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #define MD_CNTL_WRCW 0x00080000 #define MD_CNTL_MD_VALUE(x) (x & 0x0000FFFF) +/* DDR_CDR1 */ +#define DDR_CDR1_DHC_EN 0x80000000 + /* Record of register values computed */ typedef struct fsl_ddr_cfg_regs_s { struct { diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index 85b6c78..6660b01 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -56,12 +56,14 @@ phys_size_t fixed_sdram(void) strmhz(buf, sysinfo.freqDDRBus)); ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); #if (CONFIG_NUM_DDR_CONTROLLERS == 2) memcpy(&ddr_cfg_regs, fixed_ddr_parm_1[i].ddr_settings, sizeof(ddr_cfg_regs)); + ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 1); #endif @@ -143,6 +145,7 @@ typedef struct { u32 datarate_mhz_high; u32 n_ranks; u32 clk_adjust; + u32 wrlvl_start; u32 cpo; u32 write_data_delay; u32 force_2T; @@ -162,57 +165,61 @@ typedef struct { /* XXX: Single rank at 800 MHz is OK. */ const board_specific_parameters_t board_specific_parameters[][30] = { { - /* memory controller 0 */ - /* lo| hi| num| clk| cpo|wrdata|2T */ - /* mhz| mhz|ranks|adjst| | delay| */ - { 0, 333, 4, 6, 7, 3, 0}, - {334, 400, 4, 6, 9, 3, 0}, - {401, 549, 4, 6, 11, 3, 0}, - {550, 680, 4, 1, 10, 5, 0}, - {681, 850, 4, 1, 12, 5, 0}, - {851, 1050, 4, 1, 12, 5, 0}, - {1051, 1250, 4, 1, 15, 4, 0}, - {1251, 1350, 4, 1, 15, 4, 0}, - { 0, 333, 2, 6, 7, 3, 0}, - {334, 400, 2, 6, 9, 3, 0}, - {401, 549, 2, 6, 11, 3, 0}, - {550, 680, 2, 1, 10, 5, 0}, - {681, 850, 2, 1, 12, 5, 0}, - {851, 1050, 2, 1, 12, 5, 0}, - {1051, 1250, 2, 1, 15, 4, 0}, - {1251, 1350, 2, 1, 15, 4, 0}, - { 0, 333, 1, 6, 7, 3, 0}, - {334, 400, 1, 6, 9, 3, 0}, - {401, 549, 1, 6, 11, 3, 0}, - {550, 680, 1, 1, 10, 5, 0}, - {681, 850, 1, 1, 12, 5, 0} + /* + * memory controller 0 + * lo| hi| num| clk| wrlvl | cpo |wrdata|2T + * mhz| mhz|ranks|adjst| start | delay| + */ + { 0, 333, 4, 5, 7, 0xff, 2, 0}, + {334, 400, 4, 5, 7, 0xff, 2, 0}, + {401, 549, 4, 5, 7, 0xff, 2, 0}, + {550, 680, 4, 5, 7, 0xff, 2, 0}, + {681, 850, 4, 5, 7, 0xff, 2, 0}, + {851, 1050, 4, 5, 7, 0xff, 2, 0}, + {1051, 1250, 4, 5, 8, 0xff, 2, 0}, + {1251, 1350, 4, 5, 9, 0xff, 2, 0}, + { 0, 333, 2, 5, 7, 0xff, 2, 0}, + {334, 400, 2, 5, 7, 0xff, 2, 0}, + {401, 549, 2, 5, 7, 0xff, 2, 0}, + {550, 680, 2, 5, 7, 0xff, 2, 0}, + {681, 850, 2, 5, 7, 0xff, 2, 0}, + {851, 1050, 2, 5, 7, 0xff, 2, 0}, + {1051, 1250, 2, 5, 7, 0xff, 2, 0}, + {1251, 1350, 2, 5, 7, 0xff, 2, 0}, + { 0, 333, 1, 5, 7, 0xff, 2, 0}, + {334, 400, 1, 5, 7, 0xff, 2, 0}, + {401, 549, 1, 5, 7, 0xff, 2, 0}, + {550, 680, 1, 5, 7, 0xff, 2, 0}, + {681, 850, 1, 5, 7, 0xff, 2, 0} }, { - /* memory controller 1 */ - /* lo| hi| num| clk| cpo|wrdata|2T */ - /* mhz| mhz|ranks|adjst| | delay| */ - { 0, 333, 4, 6, 7, 3, 0}, - {334, 400, 4, 6, 9, 3, 0}, - {401, 549, 4, 6, 11, 3, 0}, - {550, 680, 4, 1, 10, 5, 0}, - {681, 850, 4, 1, 12, 5, 0}, - {851, 1050, 4, 1, 12, 5, 0}, - {1051, 1250, 4, 1, 15, 4, 0}, - {1251, 1350, 4, 1, 15, 4, 0}, - { 0, 333, 2, 6, 7, 3, 0}, - {334, 400, 2, 6, 9, 3, 0}, - {401, 549, 2, 6, 11, 3, 0}, - {550, 680, 2, 1, 11, 6, 0}, - {681, 850, 2, 1, 13, 6, 0}, - {851, 1050, 2, 1, 13, 6, 0}, - {1051, 1250, 2, 1, 15, 4, 0}, - {1251, 1350, 2, 1, 15, 4, 0}, - { 0, 333, 1, 6, 7, 3, 0}, - {334, 400, 1, 6, 9, 3, 0}, - {401, 549, 1, 6, 11, 3, 0}, - {550, 680, 1, 1, 11, 6, 0}, - {681, 850, 1, 1, 13, 6, 0} + /* + * memory controller 1 + * lo| hi| num| clk| wrlvl | cpo |wrdata|2T + * mhz| mhz|ranks|adjst| start | delay| + */ + { 0, 333, 4, 5, 7, 0xff, 2, 0}, + {334, 400, 4, 5, 7, 0xff, 2, 0}, + {401, 549, 4, 5, 7, 0xff, 2, 0}, + {550, 680, 4, 5, 7, 0xff, 2, 0}, + {681, 850, 4, 5, 7, 0xff, 2, 0}, + {851, 1050, 4, 5, 7, 0xff, 2, 0}, + {1051, 1250, 4, 5, 8, 0xff, 2, 0}, + {1251, 1350, 4, 5, 9, 0xff, 2, 0}, + { 0, 333, 2, 5, 7, 0xff, 2, 0}, + {334, 400, 2, 5, 7, 0xff, 2, 0}, + {401, 549, 2, 5, 7, 0xff, 2, 0}, + {550, 680, 2, 5, 7, 0xff, 2, 0}, + {681, 850, 2, 5, 7, 0xff, 2, 0}, + {851, 1050, 2, 5, 7, 0xff, 2, 0}, + {1051, 1250, 2, 5, 7, 0xff, 2, 0}, + {1251, 1350, 2, 5, 7, 0xff, 2, 0}, + { 0, 333, 1, 5, 7, 0xff, 2, 0}, + {334, 400, 1, 5, 7, 0xff, 2, 0}, + {401, 549, 1, 5, 7, 0xff, 2, 0}, + {550, 680, 1, 5, 7, 0xff, 2, 0}, + {681, 850, 1, 5, 7, 0xff, 2, 0} } }; @@ -227,37 +234,18 @@ void fsl_ddr_board_options(memctl_options_t *popts, u32 i; ulong ddr_freq; - /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in - * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If - * there are two dimms in the controller, set odt_rd_cfg to 3 and - * odt_wr_cfg to 3 for the even CS, 0 for the odd CS. - */ - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - if (i&1) { /* odd CS */ - popts->cs_local_opts[i].odt_rd_cfg = 0; - popts->cs_local_opts[i].odt_wr_cfg = 1; - } else { /* even CS */ - if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) { - popts->cs_local_opts[i].odt_rd_cfg = 0; - popts->cs_local_opts[i].odt_wr_cfg = 1; - } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) { - popts->cs_local_opts[i].odt_rd_cfg = 3; - popts->cs_local_opts[i].odt_wr_cfg = 3; - } - } - } - /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr * freqency and n_banks specified in board_specific_parameters table. */ ddr_freq = get_ddr_freq(0) / 1000000; for (i = 0; i < num_params; i++) { if (ddr_freq >= pbsp->datarate_mhz_low && - ddr_freq <= pbsp->datarate_mhz_high && - pdimm->n_ranks == pbsp->n_ranks) { - popts->cpo_override = 0xff; /* force auto CPO calibration */ - popts->write_data_delay = 2; - popts->clk_adjust = 5; /* Force value to be 5/8 clock cycle */ + ddr_freq <= pbsp->datarate_mhz_high && + pdimm[0].n_ranks == pbsp->n_ranks) { + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = pbsp->write_data_delay; + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; popts->twoT_en = pbsp->force_2T; } pbsp++; @@ -272,17 +260,32 @@ void fsl_ddr_board_options(memctl_options_t *popts, * Write leveling override */ popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xa; - popts->wrlvl_start = 0x7; + popts->wrlvl_sample = 0xf; + /* * Rtt and Rtt_WR override */ - popts->rtt_override = 1; - popts->rtt_override_value = DDR3_RTT_120_OHM; - popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */ + popts->rtt_override = 0; /* Enable ZQ calibration */ popts->zq_en = 1; + + /* DHC_EN =1, ODT = 60 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN; + + /* override SPD values. rcw_2 should vary at differnt speed */ + if (pdimm[0].n_ranks == 4) { + popts->rcw_override = 1; + popts->rcw_1 = 0x000a5a00; + if (ddr_freq <= 800) + popts->rcw_2 = 0x00000000; + else if (ddr_freq <= 1066) + popts->rcw_2 = 0x00100000; + else if (ddr_freq <= 1333) + popts->rcw_2 = 0x00200000; + else + popts->rcw_2 = 0x00300000; + } } phys_size_t initdram(int board_type) -- cgit v1.1