From 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 20 Nov 2007 13:14:20 +0100 Subject: Fix endianness conversions in rtl8169 driver It is unclear on what platforms this driver has been tested, since noone up to now defines CONFIG_RTL8169 in the board configuration header. Now it has been fixed for a big-endian mpc8241 based linkstation platform. This patch presents the necessary endianness conversion fixes. Signed-off-by: Guennadi Liakhovetski --- drivers/net/rtl8169.c | 100 +++++++++++++++++++++++--------------------------- 1 file changed, 45 insertions(+), 55 deletions(-) diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c index 63ea2cc..1d7f31c 100644 --- a/drivers/net/rtl8169.c +++ b/drivers/net/rtl8169.c @@ -48,7 +48,10 @@ * * Indent Options: indent -kr -i8 ***************************************************************************/ - +/* + * 26 August 2006 Mihai Georgian + * Modified to use le32_to_cpu and cpu_to_le32 properly + */ #include #include #include @@ -68,12 +71,7 @@ static u32 ioaddr; /* Condensed operations for readability. */ -#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr)) -#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr)) - #define currticks() get_timer(0) -#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a) -#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a) /* media options */ #define MAX_UNITS 8 @@ -102,7 +100,7 @@ static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 }; #define RTL_MIN_IO_SIZE 0x80 #define TX_TIMEOUT (6*HZ) -/* write/read MMIO register */ +/* write/read MMIO register. Notice: {read,write}[wl] do the necessary swapping */ #define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg)) #define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg)) #define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg)) @@ -218,7 +216,7 @@ enum RTL8169_register_content { PHY_Enable_Auto_Nego = 0x1000, /* PHY_STAT_REG = 1; */ - PHY_Auto_Neco_Comp = 0x0020, + PHY_Auto_Nego_Comp = 0x0020, /* PHY_AUTO_NEGO_REG = 4; */ PHY_Cap_10_Half = 0x0020, @@ -413,23 +411,23 @@ static int rtl_recv(struct eth_device *dev) ioaddr = dev->iobase; cur_rx = tpc->cur_rx; - if ((tpc->RxDescArray[cur_rx].status & OWNbit) == 0) { - if (!(tpc->RxDescArray[cur_rx].status & RxRES)) { + if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) { + if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) { unsigned char rxdata[RX_BUF_LEN]; - length = (int) (tpc->RxDescArray[cur_rx]. - status & 0x00001FFF) - 4; + length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx]. + status) & 0x00001FFF) - 4; memcpy(rxdata, tpc->RxBufferRing[cur_rx], length); NetReceive(rxdata, length); if (cur_rx == NUM_RX_DESC - 1) tpc->RxDescArray[cur_rx].status = - (OWNbit | EORbit) + RX_BUF_SIZE; + cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE); else tpc->RxDescArray[cur_rx].status = - OWNbit + RX_BUF_SIZE; + cpu_to_le32(OWNbit + RX_BUF_SIZE); tpc->RxDescArray[cur_rx].buf_addr = - virt_to_bus(tpc->RxBufferRing[cur_rx]); + cpu_to_le32(tpc->RxBufferRing[cur_rx]); } else { puts("Error Rx"); } @@ -454,6 +452,7 @@ static int rtl_send(struct eth_device *dev, volatile void *packet, int length) u8 *ptxb; int entry = tpc->cur_tx % NUM_TX_DESC; u32 len = length; + int ret; #ifdef DEBUG_RTL8169_TX int stime = currticks(); @@ -470,34 +469,38 @@ static int rtl_send(struct eth_device *dev, volatile void *packet, int length) while (len < ETH_ZLEN) ptxb[len++] = '\0'; - tpc->TxDescArray[entry].buf_addr = virt_to_bus(ptxb); + tpc->TxDescArray[entry].buf_addr = cpu_to_le32(ptxb); if (entry != (NUM_TX_DESC - 1)) { tpc->TxDescArray[entry].status = - (OWNbit | FSbit | LSbit) | ((len > ETH_ZLEN) ? - len : ETH_ZLEN); + cpu_to_le32((OWNbit | FSbit | LSbit) | + ((len > ETH_ZLEN) ? len : ETH_ZLEN)); } else { tpc->TxDescArray[entry].status = - (OWNbit | EORbit | FSbit | LSbit) | - ((len > ETH_ZLEN) ? length : ETH_ZLEN); + cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) | + ((len > ETH_ZLEN) ? len : ETH_ZLEN)); } RTL_W8(TxPoll, 0x40); /* set polling bit */ tpc->cur_tx++; to = currticks() + TX_TIMEOUT; - while ((tpc->TxDescArray[entry].status & OWNbit) && (currticks() < to)); /* wait */ + while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit) + && (currticks() < to)); /* wait */ if (currticks() >= to) { #ifdef DEBUG_RTL8169_TX puts ("tx timeout/error\n"); printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime); #endif - return 0; + ret = 0; } else { #ifdef DEBUG_RTL8169_TX puts("tx done\n"); #endif - return length; + ret = length; } + /* Delay to make net console (nc) work properly */ + udelay(20); + return ret; } static void rtl8169_set_rx_mode(struct eth_device *dev) @@ -564,8 +567,8 @@ static void rtl8169_hw_start(struct eth_device *dev) tpc->cur_rx = 0; - RTL_W32(TxDescStartAddr, virt_to_le32desc(tpc->TxDescArray)); - RTL_W32(RxDescStartAddr, virt_to_le32desc(tpc->RxDescArray)); + RTL_W32(TxDescStartAddr, tpc->TxDescArray); + RTL_W32(RxDescStartAddr, tpc->RxDescArray); RTL_W8(Cfg9346, Cfg9346_Lock); udelay(10); @@ -603,13 +606,14 @@ static void rtl8169_init_ring(struct eth_device *dev) for (i = 0; i < NUM_RX_DESC; i++) { if (i == (NUM_RX_DESC - 1)) tpc->RxDescArray[i].status = - (OWNbit | EORbit) + RX_BUF_SIZE; + cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE); else - tpc->RxDescArray[i].status = OWNbit + RX_BUF_SIZE; + tpc->RxDescArray[i].status = + cpu_to_le32(OWNbit + RX_BUF_SIZE); tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE]; tpc->RxDescArray[i].buf_addr = - virt_to_bus(tpc->RxBufferRing[i]); + cpu_to_le32(tpc->RxBufferRing[i]); } #ifdef DEBUG_RTL8169 @@ -623,8 +627,6 @@ RESET - Finish setting up the ethernet interface static void rtl_reset(struct eth_device *dev, bd_t *bis) { int i; - u8 diff; - u32 TxPhyAddr, RxPhyAddr; #ifdef DEBUG_RTL8169 int stime = currticks(); @@ -632,25 +634,14 @@ static void rtl_reset(struct eth_device *dev, bd_t *bis) #endif tpc->TxDescArrays = tx_ring; - if (tpc->TxDescArrays == 0) - puts("Allot Error"); /* Tx Desscriptor needs 256 bytes alignment; */ - TxPhyAddr = virt_to_bus(tpc->TxDescArrays); - diff = 256 - (TxPhyAddr - ((TxPhyAddr >> 8) << 8)); - TxPhyAddr += diff; - tpc->TxDescArray = (struct TxDesc *) (tpc->TxDescArrays + diff); + tpc->TxDescArray = (struct TxDesc *) ((unsigned long)(tpc->TxDescArrays + + 255) & ~255); tpc->RxDescArrays = rx_ring; /* Rx Desscriptor needs 256 bytes alignment; */ - RxPhyAddr = virt_to_bus(tpc->RxDescArrays); - diff = 256 - (RxPhyAddr - ((RxPhyAddr >> 8) << 8)); - RxPhyAddr += diff; - tpc->RxDescArray = (struct RxDesc *) (tpc->RxDescArrays + diff); - - if (tpc->TxDescArrays == NULL || tpc->RxDescArrays == NULL) { - puts("Allocate RxDescArray or TxDescArray failed\n"); - return; - } + tpc->RxDescArray = (struct RxDesc *) ((unsigned long)(tpc->RxDescArrays + + 255) & ~255); rtl8169_init_ring(dev); rtl8169_hw_start(dev); @@ -733,7 +724,7 @@ static int rtl_init(struct eth_device *dev, bd_t *bis) /* Get MAC address. FIXME: read EEPROM */ for (i = 0; i < MAC_ADDR_LEN; i++) - dev->enetaddr[i] = RTL_R8(MAC0 + i); + bis->bi_enetaddr[i] = dev->enetaddr[i] = RTL_R8(MAC0 + i); #ifdef DEBUG_RTL8169 printf("MAC Address"); @@ -808,7 +799,7 @@ static int rtl_init(struct eth_device *dev, bd_t *bis) /* wait for auto-negotiation process */ for (i = 10000; i > 0; i--) { /* check if auto-negotiation complete */ - if (mdio_read(PHY_STAT_REG) & PHY_Auto_Neco_Comp) { + if (mdio_read(PHY_STAT_REG) & PHY_Auto_Nego_Comp) { udelay(100); option = RTL_R8(PHYstatus); if (option & _1000bpsF) { @@ -818,13 +809,12 @@ static int rtl_init(struct eth_device *dev, bd_t *bis) #endif } else { #ifdef DEBUG_RTL8169 - printf - ("%s: %sMbps %s-duplex operation.\n", - dev->name, - (option & _100bps) ? "100" : - "10", - (option & FullDup) ? "Full" : - "Half"); + printf("%s: %sMbps %s-duplex operation.\n", + dev->name, + (option & _100bps) ? "100" : + "10", + (option & FullDup) ? "Full" : + "Half"); #endif } break; @@ -869,7 +859,7 @@ int rtl8169_initialize(bd_t *bis) sprintf (dev->name, "RTL8169#%d", card_number); dev->priv = (void *) devno; - dev->iobase = (int)bus_to_phys(iobase); + dev->iobase = (int)pci_mem_to_phys(devno, iobase); dev->init = rtl_reset; dev->halt = rtl_halt; -- cgit v1.1