From 5dd1086142290ea25a67b7a9a48c65cb60636da2 Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Thu, 15 Nov 2012 10:33:41 +0800 Subject: ENGR00233730 PFUZE mx6q_sabresd: remove extra increase for PFUZE tolerance There is no more tolerance issue on PFUZE, it will be only 25mV, so that we no need increase VDDSOC_IN from 1.375V to 1.425V. Signed-off-by: Robin Gong --- board/freescale/mx6q_sabresd/mx6q_sabresd.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/board/freescale/mx6q_sabresd/mx6q_sabresd.c b/board/freescale/mx6q_sabresd/mx6q_sabresd.c index 1bc2e35..3fa3976 100644 --- a/board/freescale/mx6q_sabresd/mx6q_sabresd.c +++ b/board/freescale/mx6q_sabresd/mx6q_sabresd.c @@ -777,20 +777,6 @@ static int setup_pmic_voltages(void) return -1; } printf("Found PFUZE100! deviceid=%x,revid=%x\n", value, rev_id); - /*VDDCORE/VDDSOC default 1.375V is not enough, considering - pfuze tolerance and IR drop and ripple, need increase - to 1.425V for SabreSD*/ - value = 0x2d; - if (i2c_write(0x8, 0x20, 1, &value, 1)) { - printf("VDDCORE set voltage error!\n"); - return -1; - } - - value = 0x2d; - if (i2c_write(0x8, 0x2e, 1, &value, 1)) { - printf("VDDSOC set voltage error!\n"); - return -1; - } #if CONFIG_MX6_INTER_LDO_BYPASS /*VDDCORE 1.1V@800Mhz: SW1AB*/ -- cgit v1.1