From 5bc528fa4da751d472397b308137238a6465afd2 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Sat, 7 Oct 2006 11:35:25 +0200 Subject: Update ALPR code (NAND support working now) Patch by Stefan Roese, 07 Oct 2006 --- CHANGELOG | 3 + board/prodrive/alpr/Makefile | 2 +- board/prodrive/alpr/alpr.c | 31 +++---- board/prodrive/alpr/flash.c | 70 +++++++++++++++ board/prodrive/alpr/init.S | 89 +++++++++---------- board/prodrive/alpr/nand.c | 202 +++++++++++------------------------------- board/prodrive/common/flash.c | 4 + include/configs/alpr.h | 101 +++++++-------------- 8 files changed, 218 insertions(+), 284 deletions(-) create mode 100644 board/prodrive/alpr/flash.c diff --git a/CHANGELOG b/CHANGELOG index 7ed5e66..a21526b 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Update ALPR code (NAND support working now) + Patch by Stefan Roese, 07 Oct 2006 + * Remove compile warnings in fpga code Patch by Stefan Roese, 07 Oct 2006 diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile index 993ad19..1024a41 100644 --- a/board/prodrive/alpr/Makefile +++ b/board/prodrive/alpr/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o fpga.o nand.o +COBJS = $(BOARD).o flash.o fpga.o nand.o SOBJS = init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index 4f250c4..e8435bf 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -38,11 +38,19 @@ int board_early_init_f (void) /*-------------------------------------------------------------------------+ | Initialize EBC CONFIG +-------------------------------------------------------------------------*/ +#if 0 mtebc(xbcfg, EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); +#else + mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK | + EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | + EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | + EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); +#endif /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. @@ -230,19 +238,6 @@ int is_pci_host(struct pci_controller *hose) #if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { - unsigned short temp_short; -#if 0 - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 PCI Configuration regs. - | Enable PowerPC440 to be a master on the PCI bus (PMM). - | Enable PowerPC440 to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -#endif -#if 1 /*--------------------------------------------------------------------------+ | PowerPC440 PCI Master configuration. | Map PLB/processor addresses to PCI memory space. @@ -265,8 +260,6 @@ void pci_master_init(struct pci_controller *hose) out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ out32r(PCIX0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ - -#endif } #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ @@ -281,3 +274,11 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif + +void board_reset(void) +{ + /* + * Initiate chip reset in debug control register DBCR + */ + mtspr(dbcr0, 0x20000000); +} diff --git a/board/prodrive/alpr/flash.c b/board/prodrive/alpr/flash.c new file mode 100644 index 0000000..8fa0084 --- /dev/null +++ b/board/prodrive/alpr/flash.c @@ -0,0 +1,70 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +/* + * include common flash code (for esd boards) + */ +#include "../common/flash.c" + +/* + * Prototypes + */ +static ulong flash_get_size (vu_long * addr, flash_info_t * info); + +unsigned long flash_init(void) +{ + unsigned long size; + int i; + + /* Init: no FLASHes known */ + for (i=0; i -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ #include #include @@ -27,15 +28,15 @@ #define TLB_VALID 0x00000200 /* Supported page sizes */ - #define SZ_1K 0x00000000 #define SZ_4K 0x00000010 #define SZ_16K 0x00000020 #define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 +#define SZ_256K 0x00000040 #define SZ_1M 0x00000050 +#define SZ_8M 0x00000060 #define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 +#define SZ_256M 0x00000090 /* Storage attributes */ #define SA_W 0x00000800 /* Write-through */ @@ -81,29 +82,23 @@ * *************************************************************************/ - .section .bootpg,"ax" - .globl tlbtab + .section .bootpg,"ax" + .globl tlbtab tlbtab: - tlbtab_start - tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) - tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I) - tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X ) - tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X ) - tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) - - /* PCI */ - tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I ) -#if 1 - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I ) -#endif -#if 0 - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 3, AC_R|AC_W|SA_G|SA_I ) -#endif - - /* NAND */ - tlbentry( CFG_NAND_BASE, SZ_16M, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbtab_end + tlbtab_start + tlbentry( 0xff000000, SZ_16M, 0xff000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X ) + tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X ) + tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) + + /* PCI */ + tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I ) + + /* NAND */ + tlbentry( CFG_NAND_BASE, SZ_4K, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbtab_end diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c index bd9ba35..20a8098 100644 --- a/board/prodrive/alpr/nand.c +++ b/board/prodrive/alpr/nand.c @@ -2,6 +2,9 @@ * (C) Copyright 2006 * Heiko Schocher, DENX Software Engineering, hs@denx.de * + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * * See file CREDITS for list of people who contributed to this * project. * @@ -22,69 +25,27 @@ */ #include -#include #if (CONFIG_COMMANDS & CFG_CMD_NAND) +#include #include -#if 0 -#define HS_printf(fmt,arg...) \ - printf("HS %s %s: " fmt,__FILE__, __FUNCTION__, ##arg) -#else -#define HS_printf(fmt,arg...) \ - do { } while (0) -#endif - -#if 0 -#define CPLD_REG uchar -#else -#define CPLD_REG u16 -#endif - struct alpr_ndfc_regs { - CPLD_REG cmd[4]; - CPLD_REG addr_wait; - CPLD_REG term; - CPLD_REG dummy; - uchar dum2[2]; - CPLD_REG data; + u16 cmd[4]; + u16 addr_wait; + u16 term; + u16 dummy; + u16 dummy2; + u16 data; }; static u8 hwctl; -static struct alpr_ndfc_regs *alpr_ndfc; -static int alpr_chip = 0; +static struct alpr_ndfc_regs *alpr_ndfc = NULL; -#if 1 -static int pdnb3_nand_dev_ready(struct mtd_info *mtd); +#define readb(addr) (u8)(*(volatile u16 *)(addr)) +#define writeb(d,addr) *(volatile u16 *)(addr) = ((u16)(d)) -#if 1 -static u_char alpr_read (void *padr) { - return (u_char )*((u16 *)(padr)); -} -#else -static u_char alpr_read (void *padr) { - u16 hilf; - u_char ret = 0; - hilf = *((u16 *)(padr)); - ret = hilf; -printf("%p hilf: %x ret: %x\n", padr, hilf, ret); - return ret; -} -#endif - -static void alpr_write (u_char byte, void *padr) { -HS_printf("%p Byte: %x\n", padr, byte); - *(volatile u16 *)padr = (u16)(byte); -} - -#elif 0 -#define alpr_read(a) (*(volatile u16 *) (a)) -#define alpr_write(a, b) ((*(volatile u16 *) (a)) = (b)) -#else -#define alpr_read(a) readw(a) -#define alpr_write(a, b) writew(a, b) -#endif /* * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to * the NAND devices. The NDFC has command, address and data registers that @@ -93,11 +54,10 @@ HS_printf("%p Byte: %x\n", padr, byte); * We can then use this information in the read and write functions to * determine which NDFC register to access. * - * There are 2 NAND devices on the board, a Hynix HY27US08561A (32 MByte). + * There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte). */ -static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd) +static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd) { -HS_printf("cmd: %x\n", cmd); switch (cmd) { case NAND_CTL_SETCLE: hwctl |= 0x1; @@ -114,136 +74,84 @@ HS_printf("cmd: %x\n", cmd); case NAND_CTL_SETNCE: break; case NAND_CTL_CLRNCE: - alpr_write(0x00, &(alpr_ndfc->term)); + writeb(0x00, &(alpr_ndfc->term)); break; } } -static void pdnb3_nand_write_byte(struct mtd_info *mtd, u_char byte) +static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte) { -HS_printf("hwctl: %x %x %x %x\n", hwctl, byte, &(alpr_ndfc->cmd[alpr_chip]), &(alpr_ndfc->addr_wait)); + struct nand_chip *nand = mtd->priv; + if (hwctl & 0x1) - alpr_write(byte, &(alpr_ndfc->cmd[alpr_chip])); + /* + * IO_ADDR_W used as CMD[i] reg to support multiple NAND + * chips. + */ + writeb(byte, nand->IO_ADDR_W); else if (hwctl & 0x2) { - alpr_write(byte, &(alpr_ndfc->addr_wait)); + writeb(byte, &(alpr_ndfc->addr_wait)); } else - alpr_write(byte, &(alpr_ndfc->data)); + writeb(byte, &(alpr_ndfc->data)); } -static u_char pdnb3_nand_read_byte(struct mtd_info *mtd) +static u_char alpr_nand_read_byte(struct mtd_info *mtd) { - return alpr_read(&(alpr_ndfc->data)); + return readb(&(alpr_ndfc->data)); } -static void pdnb3_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +static void alpr_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) { + struct nand_chip *nand = mtd->priv; int i; -/*printf("%s chip:%d hwctl:%x size:%d\n", __FUNCTION__, alpr_chip, hwctl, len);*/ for (i = 0; i < len; i++) { if (hwctl & 0x1) - alpr_write(buf[i], &(alpr_ndfc->cmd[alpr_chip])); - else if (hwctl & 0x2) { - alpr_write(buf[i], &(alpr_ndfc->addr_wait)); - } else { - alpr_write(buf[i], &(alpr_ndfc->data)); - /*printf("i: %d\n", i);*/ - } + /* + * IO_ADDR_W used as CMD[i] reg to support multiple NAND + * chips. + */ + writeb(buf[i], nand->IO_ADDR_W); + else if (hwctl & 0x2) + writeb(buf[i], &(alpr_ndfc->addr_wait)); + else + writeb(buf[i], &(alpr_ndfc->data)); } } -static void pdnb3_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) { int i; for (i = 0; i < len; i++) { - buf[i] = alpr_read(&(alpr_ndfc->data)); + buf[i] = readb(&(alpr_ndfc->data)); } } -static int pdnb3_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) +static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) { int i; for (i = 0; i < len; i++) - if (buf[i] != alpr_read(&(alpr_ndfc->data))) + if (buf[i] != readb(&(alpr_ndfc->data))) return i; return 0; } -static int pdnb3_nand_dev_ready(struct mtd_info *mtd) +static int alpr_nand_dev_ready(struct mtd_info *mtd) { -#if 1 volatile u_char val; -/*printf("%s aufruf\n", __FUNCTION__);*/ /* * Blocking read to wait for NAND to be ready */ - val = alpr_read(&(alpr_ndfc->addr_wait)); + val = readb(&(alpr_ndfc->addr_wait)); /* * Return always true */ return 1; -#else - u8 hwctl_org = hwctl; - unsigned long timeo; - u8 val; - - hwctl = 0x01; - pdnb3_nand_write_byte (mtd, NAND_CMD_STATUS); - hwctl = hwctl_org; - - reset_timer(); - while (1) { - if (get_timer(0) > timeo) { - printf("Timeout!"); - return 0; - } - -val = pdnb3_nand_read_byte(mtd); -/*printf("%s val: %x\n", __FUNCTION__, val);*/ - if (val & NAND_STATUS_READY) - break; - } - return 1; -#endif - -} - -static void alpr_select_chip(struct mtd_info *mtd, int chip) -{ - alpr_chip = chip; -} - -static int alpr_nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) -{ - unsigned long timeo; - - if (state == FL_ERASING) - timeo = CFG_HZ * 400; - else - timeo = CFG_HZ * 20; - - if ((state == FL_ERASING) && (this->options & NAND_IS_AND)) - this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); - else - this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); - - reset_timer(); - - while (1) { - if (get_timer(0) > timeo) { - printf("Timeout!"); - return 0; - } - - if (this->read_byte(mtd) & NAND_STATUS_READY) - break; - } - return this->read_byte(mtd); } void board_nand_init(struct nand_chip *nand) @@ -252,20 +160,14 @@ void board_nand_init(struct nand_chip *nand) nand->eccmode = NAND_ECC_SOFT; - /* Set address of NAND IO lines (Using Linear Data Access Region) */ - nand->IO_ADDR_R = (void __iomem *) ((ulong) alpr_ndfc + 0x10); - nand->IO_ADDR_W = (void __iomem *) ((ulong) alpr_ndfc + 0x10); /* Reference hardware control function */ - nand->hwcontrol = pdnb3_nand_hwcontrol; + nand->hwcontrol = alpr_nand_hwcontrol; /* Set command delay time */ - nand->hwcontrol = pdnb3_nand_hwcontrol; - nand->write_byte = pdnb3_nand_write_byte; - nand->read_byte = pdnb3_nand_read_byte; - nand->write_buf = pdnb3_nand_write_buf; - nand->read_buf = pdnb3_nand_read_buf; - nand->verify_buf = pdnb3_nand_verify_buf; - nand->dev_ready = pdnb3_nand_dev_ready; - nand->select_chip = alpr_select_chip; - nand->waitfunc = alpr_nand_wait; + nand->write_byte = alpr_nand_write_byte; + nand->read_byte = alpr_nand_read_byte; + nand->write_buf = alpr_nand_write_buf; + nand->read_buf = alpr_nand_read_buf; + nand->verify_buf = alpr_nand_verify_buf; + nand->dev_ready = alpr_nand_dev_ready; } #endif diff --git a/board/prodrive/common/flash.c b/board/prodrive/common/flash.c index 8630cc1..363631f 100644 --- a/board/prodrive/common/flash.c +++ b/board/prodrive/common/flash.c @@ -48,6 +48,7 @@ void flash_print_info(flash_info_t *info) case FLASH_MAN_AMD: printf ("AMD "); break; case FLASH_MAN_FUJ: printf ("FUJITSU "); break; case FLASH_MAN_SST: printf ("SST "); break; + case FLASH_MAN_STM: printf ("ST "); break; case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break; default: printf ("Unknown Vendor "); break; } @@ -156,6 +157,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info) case (CFG_FLASH_WORD_SIZE)SST_MANUFACT: info->flash_id = FLASH_MAN_SST; break; + case (CFG_FLASH_WORD_SIZE)STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT: info->flash_id = FLASH_MAN_EXCEL; break; diff --git a/include/configs/alpr.h b/include/configs/alpr.h index eeafcd6..c6731ba 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -31,8 +31,9 @@ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_BOARD_RESET 1 /* call board_reset() */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_SYS_CLK_FREQ 33333000 /* external freq to pll */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -81,44 +82,28 @@ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} /*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -#if 0 /* test-only */ -/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. - * The DS1743 code assumes this condition (i.e. -- it assumes the base - * address for the RTC registers is: - * - * CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE - * - *----------------------------------------------------------------------*/ -#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs */ -#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */ -#endif - -/*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ - -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ +#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ +#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ +#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ +/* + * The following defines are added for buggy IOP480 byte interface. + * All other boards should use the standard values (CPCI405 etc.) + */ +#define CFG_FLASH_READ0 0x0000 /* 0 is standard */ +#define CFG_FLASH_READ1 0x0001 /* 1 is standard */ +#define CFG_FLASH_READ2 0x0002 /* 2 is standard */ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ @@ -177,7 +162,7 @@ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ "flash_nfs=run nfsargs addip addtty;" \ "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addtty;" \ @@ -216,24 +201,10 @@ #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ #define CONFIG_88E1111_CLK_DELAY 1 /* set CLK delay on ALPR */ #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ -#if 0 /* test-only */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) -#else #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ CFG_CMD_DHCP | \ @@ -250,7 +221,6 @@ CFG_CMD_FPGA | \ CFG_CMD_NAND | \ CFG_CMD_REGINFO) -#endif /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include @@ -279,15 +249,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ -#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ - -#define CONFIG_NETCONSOLE /* include NetConsole support */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- @@ -321,7 +288,6 @@ ist das mit den multiple Device in PS Mode erklaert ...*/ - /* FPGA program pin configuration */ #define CFG_GPIO_CLK 18 /* FPGA clk pin (cpu output) */ #define CFG_GPIO_DATA 19 /* FPGA data pin (cpu output) */ @@ -336,14 +302,12 @@ /* * NAND-FLASH stuff */ -#define CFG_MAX_NAND_DEVICE 2 -#define NAND_MAX_CHIPS 2 -#define CFG_NAND_BASE 0x50000000 /* NAND FLASH Base Address */ - -#if 0 -#define CONFIG_MTD_DEBUG -#define CONFIG_MTD_DEBUG_VERBOSE 4 -#endif +#define CFG_MAX_NAND_DEVICE 4 +#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE +#define CFG_NAND_BASE 0xF0000000 /* NAND FLASH Base Address */ +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE + 0, CFG_NAND_BASE + 2, \ + CFG_NAND_BASE + 4, CFG_NAND_BASE + 6 } +#define CFG_NAND_QUIET_TEST 1 /* don't warn upon unknown NAND flash */ /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup @@ -353,14 +317,9 @@ /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */ #define CFG_EBC_PB0AP 0x92015480 #define CFG_EBC_PB0CR (CFG_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */ -/* Memory Bank 1 (NAND-FLASH) initialization */ -/*#define CFG_EBC_PB1AP 0x108f4380 */ /* TODO */ -/*#define CFG_EBC_PB1AP 0x7f854380 */ /* TODO */ -/*#define CFG_EBC_PB1AP 0x108553c0 */ -/*#define CFG_EBC_PB1AP 0x108053c0 */ -#define CFG_EBC_PB1AP 0x10810180 - -/*#define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x18000) *//* BS=1MB,BU=R/W,BW=8bit */ + +/* Memory Bank 1 (NAND-FLASH) initialization */ +#define CFG_EBC_PB1AP 0x01840380 /* TWT=3 */ #define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */ /* -- cgit v1.1