From 58d1fedb1f7d1a65918dcdc82c53f83b4c813368 Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Wed, 8 Jun 2016 05:07:34 -0700 Subject: x86: baytrail: Change fsp, emmc-boot-mode to "auto" At present all BayTrail boards configure fsp,emmc-boot-mode to 2, which means "eMMC 4.1" per FSP documentation. However, eMMC 4.1 only shows up on some early stepping silicon of BayTrail SoC. Newer stepping SoC integrates an eMMC 4.5 controller. Intel FSP provides a config option fsp,emmc-boot-mode which tells FSP which eMMC controller it initializes. Instead of hardcoded to 2, now we change it to 1 which means "auto". With this change, MinnowMax board (with a D0 stepping BayTrail SoC) can see the eMMC 4.5 controller at PCI address 00.17.00 via U-Boot 'pci' command. Signed-off-by: Bin Meng Reviewed-by: Stefan Roese Reviewed-by: Simon Glass --- arch/x86/dts/bayleybay.dts | 2 +- arch/x86/dts/conga-qeval20-qa3-e3845.dts | 2 +- arch/x86/dts/minnowmax.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts index 536049b..1c2f671 100644 --- a/arch/x86/dts/bayleybay.dts +++ b/arch/x86/dts/bayleybay.dts @@ -218,7 +218,7 @@ fsp,mrc-init-mmio-size = <0x800>; fsp,mrc-init-spd-addr1 = <0xa0>; fsp,mrc-init-spd-addr2 = <0xa2>; - fsp,emmc-boot-mode = <2>; + fsp,emmc-boot-mode = <1>; fsp,enable-sdio; fsp,enable-sdcard; fsp,enable-hsuart1; diff --git a/arch/x86/dts/conga-qeval20-qa3-e3845.dts b/arch/x86/dts/conga-qeval20-qa3-e3845.dts index 7e69ba4..1e14c8b 100644 --- a/arch/x86/dts/conga-qeval20-qa3-e3845.dts +++ b/arch/x86/dts/conga-qeval20-qa3-e3845.dts @@ -218,7 +218,7 @@ fsp,mrc-init-mmio-size = <0x800>; fsp,mrc-init-spd-addr1 = <0xa0>; fsp,mrc-init-spd-addr2 = <0xa2>; - fsp,emmc-boot-mode = <2>; + fsp,emmc-boot-mode = <1>; fsp,enable-sdio; fsp,enable-sdcard; fsp,enable-hsuart1; diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts index fda170c..ba96e36 100644 --- a/arch/x86/dts/minnowmax.dts +++ b/arch/x86/dts/minnowmax.dts @@ -247,7 +247,7 @@ fsp,mrc-init-mmio-size = <0x800>; fsp,mrc-init-spd-addr1 = <0xa0>; fsp,mrc-init-spd-addr2 = <0xa2>; - fsp,emmc-boot-mode = <2>; + fsp,emmc-boot-mode = <1>; fsp,enable-sdio; fsp,enable-sdcard; fsp,enable-hsuart1; -- cgit v1.1