From 3ea93948cfaedc8e3d7d7804774be65174d2b56e Mon Sep 17 00:00:00 2001 From: Hatim RV Date: Tue, 11 Dec 2012 00:52:47 +0000 Subject: exynos5: Add DT based driver for SMC911X ethernet Add device tree based ethernet driver for SMC911X controller on SMDK5250 boards. Signed-off-by: Hatim Ali Acked-by: Simon Glass Signed-off-by: Minkyu Kang --- arch/arm/include/asm/arch-exynos/sromc.h | 18 +++++ board/samsung/smdk5250/smdk5250.c | 115 +++++++++++++++++++++++-------- 2 files changed, 103 insertions(+), 30 deletions(-) diff --git a/arch/arm/include/asm/arch-exynos/sromc.h b/arch/arm/include/asm/arch-exynos/sromc.h index f616bcb..dc6aae2 100644 --- a/arch/arm/include/asm/arch-exynos/sromc.h +++ b/arch/arm/include/asm/arch-exynos/sromc.h @@ -48,4 +48,22 @@ struct s5p_sromc { /* Configure the Band Width and Bank Control Regs for required SROMC Bank */ void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf); +enum { + FDT_SROM_PMC, + FDT_SROM_TACP, + FDT_SROM_TAH, + FDT_SROM_TCOH, + FDT_SROM_TACC, + FDT_SROM_TCOS, + FDT_SROM_TACS, + + FDT_SROM_TIMING_COUNT, +}; + +struct fdt_sromc { + u8 bank; /* srom bank number */ + u8 width; /* bus width in bytes */ + unsigned int timing[FDT_SROM_TIMING_COUNT]; /* timing parameters */ +}; + #endif /* __ASM_ARCH_SROMC_H_ */ diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 9c926d6..268b42c 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -21,6 +21,7 @@ */ #include +#include #include #include #include @@ -34,34 +35,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_SMC911X -static int smc9115_pre_init(void) -{ - u32 smc_bw_conf, smc_bc_conf; - int err; - - /* Ethernet needs data bus width of 16 bits */ - smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK) - | SROMC_BYTE_ENABLE(CONFIG_ENV_SROM_BANK); - - smc_bc_conf = SROMC_BC_TACS(0x01) | SROMC_BC_TCOS(0x01) - | SROMC_BC_TACC(0x06) | SROMC_BC_TCOH(0x01) - | SROMC_BC_TAH(0x0C) | SROMC_BC_TACP(0x09) - | SROMC_BC_PMC(0x01); - - /* Select and configure the SROMC bank */ - err = exynos_pinmux_config(PERIPH_ID_SROMC, - CONFIG_ENV_SROM_BANK | PINMUX_FLAG_16BIT); - if (err) { - debug("SROMC not configured\n"); - return err; - } - - s5p_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf); - return 0; -} -#endif - int board_init(void) { gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); @@ -122,12 +95,94 @@ void dram_init_banksize(void) PHYS_SDRAM_8_SIZE); } +#ifdef CONFIG_OF_CONTROL +static int decode_sromc(const void *blob, struct fdt_sromc *config) +{ + int err; + int node; + + node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC); + if (node < 0) { + debug("Could not find SROMC node\n"); + return node; + } + + config->bank = fdtdec_get_int(blob, node, "bank", 0); + config->width = fdtdec_get_int(blob, node, "width", 2); + + err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing, + FDT_SROM_TIMING_COUNT); + if (err < 0) { + debug("Could not decode SROMC configuration\n"); + return -FDT_ERR_NOTFOUND; + } + + return 0; +} +#endif + int board_eth_init(bd_t *bis) { #ifdef CONFIG_SMC911X - if (smc9115_pre_init()) + u32 smc_bw_conf, smc_bc_conf; + struct fdt_sromc config; + fdt_addr_t base_addr; + int node; + +#ifdef CONFIG_OF_CONTROL + node = decode_sromc(gd->fdt_blob, &config); + if (node < 0) { + debug("%s: Could not find sromc configuration\n", __func__); + return 0; + } + node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215); + if (node < 0) { + debug("%s: Could not find lan9215 configuration\n", __func__); + return 0; + } + + /* We now have a node, so any problems from now on are errors */ + base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg"); + if (base_addr == FDT_ADDR_T_NONE) { + debug("%s: Could not find lan9215 address\n", __func__); return -1; - return smc911x_initialize(0, CONFIG_SMC911X_BASE); + } +#else + /* Non-FDT configuration - bank number and timing parameters*/ + config.bank = CONFIG_ENV_SROM_BANK; + config.width = 2; + + config.timing[FDT_SROM_TACS] = 0x01; + config.timing[FDT_SROM_TCOS] = 0x01; + config.timing[FDT_SROM_TACC] = 0x06; + config.timing[FDT_SROM_TCOH] = 0x01; + config.timing[FDT_SROM_TAH] = 0x0C; + config.timing[FDT_SROM_TACP] = 0x09; + config.timing[FDT_SROM_PMC] = 0x01; + base_addr = CONFIG_SMC911X_BASE; +#endif + + /* Ethernet needs data bus width of 16 bits */ + if (config.width != 2) { + debug("%s: Unsupported bus width %d\n", __func__, + config.width); + return -1; + } + smc_bw_conf = SROMC_DATA16_WIDTH(config.bank) + | SROMC_BYTE_ENABLE(config.bank); + + smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) |\ + SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |\ + SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |\ + SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |\ + SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) |\ + SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |\ + SROMC_BC_PMC(config.timing[FDT_SROM_PMC]); + + /* Select and configure the SROMC bank */ + exynos_pinmux_config(PERIPH_ID_SROMC, config.bank); + s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf); + return smc911x_initialize(0, base_addr); #endif return 0; } -- cgit v1.1