From 4bfd0002b653dfc9f9ddd8e9a4ce0acd40bde3ac Mon Sep 17 00:00:00 2001 From: Sergey Lapin Date: Tue, 4 Jun 2013 11:42:43 -0500 Subject: bug, nand, am33xx: nand->ecc.strength not set in board_nand_init() commit dfe64e2c89731a3f9950d7acd8681b68df2bae03 Author: Sergey Lapin Date: Mon Jan 14 03:46:50 2013 +0000 mtd: resync with Linux-3.7.1 Introduced runtime bug: U-Boot 2013.04-00499-g46567df-dirty (Jun 04 2013 - 08:17:08) I2C: ready DRAM: 512 MiB WARNING: Caches not enabled NAND: BUG: failure at nand_base.c:3214/nand_scan_tail()! BUG! resetting ... on boards using drivers/mtd/nand/omap_gpmc.c as in board_nand_init() nand->ecc.strength is not set. Fix this! Signed-off-by: Heiko Schocher Cc: Sergey Lapin Cc: Scott Wood Cc: Tom Rini --- drivers/mtd/nand/omap_gpmc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index d5f3248..5d08822 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -936,6 +936,7 @@ int board_nand_init(struct nand_chip *nand) nand->ecc.layout = &hw_bch8_nand_oob; nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; + nand->ecc.strength = 8; nand->ecc.hwctl = omap_enable_ecc_bch; nand->ecc.correct = omap_correct_data_bch; nand->ecc.calculate = omap_calculate_ecc_bch; @@ -954,6 +955,7 @@ int board_nand_init(struct nand_chip *nand) nand->ecc.hwctl = omap_enable_hwecc; nand->ecc.correct = omap_correct_data; nand->ecc.calculate = omap_calculate_ecc; + nand->ecc.strength = 1; omap_hwecc_init(nand); #endif #endif -- cgit v1.1