From 6a655d8e34e044e1030f88a611c890a50c9be413 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Wed, 25 Nov 2015 09:46:19 +0100 Subject: powerpc, mpc5xxx: fix missing bootflag init since: commit: f05ad9ba "Add a way to skip relocation" tqm5200s board fails to boot. Reason is that board_init_f has a function parameter bootflag, which is not setup in in arch/powerpc/cpu/mpc5xxx/start.S _start So board_init_f gets a undefined bootflag, currently the gd pointer address. Unfortunately this address sets the GD_FLG_SKIP_RELOC bit, so u-boot code gets not relocated and u-boot does not boot ... Init bootflag with 0, and tqm5200 boots fine again. Signed-off-by: Heiko Schocher Reviewed-by: Simon Glass Reviewed-by: York Sun --- arch/powerpc/cpu/mpc5xxx/start.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S index 94eb0d3..54793f0 100644 --- a/arch/powerpc/cpu/mpc5xxx/start.S +++ b/arch/powerpc/cpu/mpc5xxx/start.S @@ -91,6 +91,7 @@ _start: li r5,GD_SIZE /* parameter 3: count */ bl memset + li r3, 0 /* parameter 1: bootflag */ bl board_init_f /* run 1st part of board init code (in Flash)*/ /* NOTREACHED - board_init_f() does not return */ #else @@ -169,6 +170,7 @@ lowboot_reentry: /* r3: IMMR */ bl cpu_init_f /* run low-level CPU init code (in Flash)*/ + li r3, 0 /* parameter 1: bootflag */ bl board_init_f /* run 1st part of board init code (in Flash)*/ /* NOTREACHED - board_init_f() does not return */ -- cgit v1.1