From 04728086088e2dcc37ae0512a521246b21389838 Mon Sep 17 00:00:00 2001 From: Siva Durga Prasad Paladugu Date: Fri, 25 Apr 2014 15:47:13 +0200 Subject: sf: params: Added support for Spansion S25FL512S_512K Added support for Spansion chip "S25FL512S_512K". Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek Reviewed-by: Jagannadha Sutradharudu Teki --- drivers/mtd/spi/sf_params.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index eb372b7..ac886fd 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -60,6 +60,7 @@ const struct spi_flash_params spi_flash_params_table[] = { {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, RD_FULL, WR_QPP}, {"S25FL512S_256K", 0x010220, 0x4d00, 256 * 1024, 256, RD_FULL, WR_QPP}, {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL, WR_QPP}, + {"S25FL512S_512K", 0x010220, 0x4f00, 256 * 1024, 256, RD_FULL, WR_QPP}, #endif #ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */ {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0, 0}, -- cgit v1.1 From c1c0dd2644d6bdd64f5d36528d801d14832f6394 Mon Sep 17 00:00:00 2001 From: Andrew Ruder Date: Thu, 24 Apr 2014 13:39:32 -0500 Subject: spi: soft_spi: Support NULL din/dout buffers This mirrors the conventions used in other SPI drivers (kirkwood, davinci, atmel, et al) where the din/dout buffer can be NULL when the received/transmitted data isn't important. This reduces the need for allocating additional buffers when write-only/read-only functionality is needed. In the din == NULL case, the received data is simply not stored. In the dout == NULL case, zeroes are transmitted. Signed-off-by: Andrew Ruder Cc: Jean-Christophe PLAGNIOL-VILLARD Reviewed-by: Jagannadha Sutradharudu Teki --- drivers/spi/soft_spi.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/spi/soft_spi.c b/drivers/spi/soft_spi.c index 5d22351..c969be3 100644 --- a/drivers/spi/soft_spi.c +++ b/drivers/spi/soft_spi.c @@ -136,10 +136,14 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, /* * Check if it is time to work on a new byte. */ - if((j % 8) == 0) { - tmpdout = *txd++; + if ((j % 8) == 0) { + if (txd) + tmpdout = *txd++; + else + tmpdout = 0; if(j != 0) { - *rxd++ = tmpdin; + if (rxd) + *rxd++ = tmpdin; } tmpdin = 0; } @@ -164,9 +168,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, * bits over to left-justify them. Then store the last byte * read in. */ - if((bitlen % 8) != 0) - tmpdin <<= 8 - (bitlen % 8); - *rxd++ = tmpdin; + if (rxd) { + if ((bitlen % 8) != 0) + tmpdin <<= 8 - (bitlen % 8); + *rxd++ = tmpdin; + } if (flags & SPI_XFER_END) spi_cs_deactivate(slave); -- cgit v1.1 From 1f436a6ddf7eb7f2da1c8df6c13100429baf844a Mon Sep 17 00:00:00 2001 From: "Poddar, Sourav" Date: Wed, 23 Apr 2014 18:57:03 +0530 Subject: sf: probe: Fix quad bit set path Currently, flash quad bit is set in "spi_flash_validate_params" and later at the end in the same api, we write 0 to status register for few flashes, thereby overriding the quad bit set. This fix moves the quad bit setting outside this api in "spi_flash_probe_slave" Signed-off-by: Sourav Poddar Reviewed-by: Jagannadha Sutradharudu Teki --- drivers/mtd/spi/sf_probe.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 0a46fe3..36ae5e0 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -197,16 +197,6 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, /* Go for default supported write cmd */ flash->write_cmd = CMD_PAGE_PROGRAM; - /* Set the quad enable bit - only for quad commands */ - if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) || - (flash->read_cmd == CMD_READ_QUAD_IO_FAST) || - (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) { - if (spi_flash_set_qeb(flash, idcode[0])) { - debug("SF: Fail to set QEB for %02x\n", idcode[0]); - return NULL; - } - } - /* Read dummy_byte: dummy byte is determined based on the * dummy cycles of a particular command. * Fast commands - dummy_byte = dummy_cycles/8 @@ -327,6 +317,16 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) if (!flash) goto err_read_id; + /* Set the quad enable bit - only for quad commands */ + if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) || + (flash->read_cmd == CMD_READ_QUAD_IO_FAST) || + (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) { + if (spi_flash_set_qeb(flash, idcode[0])) { + debug("SF: Fail to set QEB for %02x\n", idcode[0]); + return NULL; + } + } + #ifdef CONFIG_OF_CONTROL if (spi_flash_decode_fdt(gd->fdt_blob, flash)) { debug("SF: FDT decode error\n"); -- cgit v1.1