From 065496d1b5304a6a67b366b613c3504aab2e2dbd Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Thu, 11 Dec 2014 18:06:31 +0100 Subject: arm: socfpga: board: Repair Micrel PHY tuning Add proper error checking into the PHY tuning patch. Make the PHY tunning only happen in case the KSZ9021 PHY is enabled in config. Call the config callback after the tuning finished. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Tom Rini Cc: Pavel Machek --- board/altera/socfpga/socfpga_cyclone5.c | 34 +++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) diff --git a/board/altera/socfpga/socfpga_cyclone5.c b/board/altera/socfpga/socfpga_cyclone5.c index 772a58e..459d82f 100644 --- a/board/altera/socfpga/socfpga_cyclone5.c +++ b/board/altera/socfpga/socfpga_cyclone5.c @@ -46,19 +46,41 @@ int board_init(void) return 0; } +/* + * PHY configuration + */ +#ifdef CONFIG_PHY_MICREL_KSZ9021 int board_phy_config(struct phy_device *phydev) { + int ret; /* * These skew settings for the KSZ9021 ethernet phy is required for ethernet * to work reliably on most flavors of cyclone5 boards. */ - ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, - 0x0); - ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, - 0x0); - ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, - 0xf0f0); + ret = ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, + 0x0); + if (ret) + return ret; + + ret = ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, + 0x0); + if (ret) + return ret; + + ret = ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, + 0xf0f0); + if (ret) + return ret; + + if (phydev->drv->config) + return phydev->drv->config(phydev); + + return 0; } +#endif #ifdef CONFIG_USB_GADGET struct s3c_plat_otg_data socfpga_otg_data = { -- cgit v1.1