From 0043b1faa7f8a6b9a38ac949335cf3a5c3074459 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Mon, 13 Oct 2014 23:42:03 -0600 Subject: exynos: universal_c210: Move to driver model soft_spi Adjust this board to use the driver model soft_spi implementation. Signed-off-by: Simon Glass Reviewed-by: Jagannadha Sutradharudu Teki --- arch/arm/dts/exynos4210-universal_c210.dts | 13 ++++++++ board/samsung/universal_c210/universal.c | 52 ------------------------------ include/configs/s5pc210_universal.h | 11 +------ 3 files changed, 14 insertions(+), 62 deletions(-) diff --git a/arch/arm/dts/exynos4210-universal_c210.dts b/arch/arm/dts/exynos4210-universal_c210.dts index cf3354f..9139810 100644 --- a/arch/arm/dts/exynos4210-universal_c210.dts +++ b/arch/arm/dts/exynos4210-universal_c210.dts @@ -41,6 +41,19 @@ status = "disabled"; }; + soft-spi { + compatible = "u-boot,soft-spi"; + cs-gpio = <&gpio 235 0>; /* Y43 */ + sclk-gpio = <&gpio 225 0>; /* Y31 */ + mosi-gpio = <&gpio 227 0>; /* Y33 */ + miso-gpio = <&gpio 224 0>; /* Y30 */ + spi-delay-us = <1>; + #address-cells = <1>; + #size-cells = <0>; + cs@0 { + }; + }; + fimd@11c00000 { compatible = "samsung,exynos-fimd"; reg = <0x11c00000 0xa4>; diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index c04f48c..22b0849 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -201,53 +201,6 @@ int exynos_early_init_f(void) return 0; } -#ifdef CONFIG_SOFT_SPI -static void soft_spi_init(void) -{ - gpio_direction_output(CONFIG_SOFT_SPI_GPIO_SCLK, - CONFIG_SOFT_SPI_MODE & SPI_CPOL); - gpio_direction_output(CONFIG_SOFT_SPI_GPIO_MOSI, 1); - gpio_direction_input(CONFIG_SOFT_SPI_GPIO_MISO); - gpio_direction_output(CONFIG_SOFT_SPI_GPIO_CS, - !(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH)); -} - -void spi_cs_activate(struct spi_slave *slave) -{ - gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS, - !(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH)); - SPI_SCL(1); - gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS, - CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS, - !(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH)); -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && cs == 0; -} - -void universal_spi_scl(int bit) -{ - gpio_set_value(CONFIG_SOFT_SPI_GPIO_SCLK, bit); -} - -void universal_spi_sda(int bit) -{ - gpio_set_value(CONFIG_SOFT_SPI_GPIO_MOSI, bit); -} - -int universal_spi_read(void) -{ - return gpio_get_value(CONFIG_SOFT_SPI_GPIO_MISO); -} -#endif - static void init_pmic_lcd(void) { unsigned char val; @@ -332,8 +285,6 @@ void exynos_cfg_lcd_gpio(void) /* gpio pad configuration for LCD reset. */ gpio_request(EXYNOS4_GPIO_Y45, "lcd_reset"); gpio_cfg_pin(EXYNOS4_GPIO_Y45, S5P_GPIO_OUTPUT); - - spi_init(); } int mipi_power(void) @@ -401,9 +352,6 @@ int exynos_init(void) break; } -#ifdef CONFIG_SOFT_SPI - soft_spi_init(); -#endif check_hw_revision(); printf("HW Revision:\t0x%x\n", board_rev); diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 4fa8d66..4b30d14 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -187,16 +187,7 @@ * SPI Settings */ #define CONFIG_SOFT_SPI -#define CONFIG_SOFT_SPI_MODE SPI_MODE_3 -#define CONFIG_SOFT_SPI_GPIO_SCLK EXYNOS4_GPIO_Y31 -#define CONFIG_SOFT_SPI_GPIO_MOSI EXYNOS4_GPIO_Y33 -#define CONFIG_SOFT_SPI_GPIO_MISO EXYNOS4_GPIO_Y30 -#define CONFIG_SOFT_SPI_GPIO_CS EXYNOS4_GPIO_Y43 - -#define SPI_DELAY udelay(1) -#define SPI_SCL(bit) universal_spi_scl(bit) -#define SPI_SDA(bit) universal_spi_sda(bit) -#define SPI_READ universal_spi_read() + #ifndef __ASSEMBLY__ void universal_spi_scl(int bit); void universal_spi_sda(int bit); -- cgit v1.1