summaryrefslogtreecommitdiff
path: root/tools
Commit message (Collapse)AuthorAgeLines
* tools/kwbimage: fix size computations for v1 imagesReinhard Pfau2015-11-29-3/+4
| | | | | | | | | | | | | | Fix computation of haeder size and binary header size. Size of opt header and some 32bit values were not taken into account. This could result in invalid boot images (due to the wrong binary header size, the image could claim to have another extension header after the binary extension although there is none). Use "uint32_t" instead of "unsigned int" for header size computation. Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* tools/kwbimage: fix endianess issueReinhard Pfau2015-11-29-20/+26
| | | | | | | | | KWB image header values are in little endian (LE). So adding appropriate cpu_to_leXX() calls to allow building those images on BE hosts, too. Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
* tools/kwbimage.c: Make sure that the resulting image is 4-byte alignedStefan Roese2015-11-29-1/+9
| | | | | | | | | | | | | | With the dtb added to the main U-Boot image, it can happen, that the resulting image is not 4-byte aligned. As the dtb tends to be unaligned. But the image needs to be 4-byte aligned. At least the Marvell hdrparser tool complains if its unaligned. By returning 1 here in kwbimage_generate(), called via tparams->vrec_header() in mkimage.c, mkimage will automatically pad the resulting image to a 4-byte size if necessary. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
* tools: zynqimage: Add Xilinx Zynq boot header generation to mkimageNathan Rossi2015-11-19-0/+258
| | | | | | | | | | | | | | | | | | | | As with other platforms vendors love to create their own boot header formats. Xilinx is no different and for the Zynq platform/SoC there exists the "boot.bin" which is read by the platforms bootrom. This format is described to a useful extent within the Xilinx Zynq TRM. This implementation adds support for the 'zynqimage' to mkimage. The implementation only considers the most common boot header which is un-encrypted and packed directly after the boot header itself (no XIP, etc.). However this implementation does take into consideration the other fields of the header for image dumping use cases (vector table and register initialization). Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Allow fw env tools to be available as libraryStefano Babic2015-11-18-1/+3
| | | | | | | | | | | Sometimes it can be useful to link the fw_ tools instead of having the fw_setenv/fw_printenv installed. Patch exports the tool as library and allowes to link it with own programs. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* tools/env: allow config filename to be passed via command line argumentMichael Heimpold2015-11-18-3/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When for example generating/manipulating SD card/eMMC images which contain U-Boot and its environment(s), it is handy to use a given configuration file instead of the compiled-in default one. And since the default configuration file is expected under /etc it's hard for an usual linux user account without special permissions to use fw_printenv/fw_setenv for this purpose. So allow to pass an optional filename via a new '-c' command line argument. Example: $ ln -s fw_printenv tools/env/fw_setenv $ cat fw_env.config test.img 0x20000 0x20000 test.img 0x40000 0x20000 $ tools/env/fw_printenv -c ./fw_env.config fdt_file fdt_file=imx28-duckbill.dtb $ tools/env/fw_setenv -c ./fw_env.config fdt_file imx28-duckbill-spi.dtb $ tools/env/fw_printenv -c ./fw_env.config fdt_file fdt_file=imx28-duckbill-spi.dtb Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* tools/kwbimage.c: Fix generation of binary headerStefan Roese2015-11-17-3/+9
| | | | | | | | | | | The binary header ends with one lword, defining if another header follows this one. This additions 4 bytes need to be taken into account in the generation of the header size. And the complete 4 bytes at the end of this binary header need to get cleared. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
* tools/proftool: fix use-after-freeVincent Stehlé2015-11-16-2/+3
| | | | | | | | | | The read_trace_config() can dereference the line pointer after freeing it on its error path. Avoid that. This was found by Coverity Scan. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Simon Glass <sjg@chromium.org>
* Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-10-0/+4
| | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* fdtgrep: Simplify the alias generation codeSimon Glass2015-11-04-22/+10
| | | | | | | | We don't need to allocate a new region list when we run out of space. The outer function can take care of this for us. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Fix bad return value checks (detected with Coccinelle)Thomas Huth2015-10-24-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | In the "Getting Started with Coccinelle - KVM edition" presentation that has been held by Julia Lawall at the KVM forum 2015 (see the slides at http://events.linuxfoundation.org/sites/events/files/slides/tutorial_kvm_0.pdf), she pointed out some bad return value checks in U-Boot that can be detected with Coccinelle by using the following config file: @@ identifier x,y; identifier f; statement S; @@ x = f(...); ( if (x < 0) S | if ( - y + x < 0) S ) This patch now fixes these issues. Signed-off-by: Thomas Huth <huth@tuxfamily.org>
* kwbimage: Align payload size to 4 bytesStefan Roese2015-10-21-0/+3
| | | | | | | The MVEBU BootROM does not allow non word aligned payloads. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-10-13-25/+64
|\
| * imximage: fix commands other than write_dataTroy Kisky2015-10-07-23/+62
| | | | | | | | | | | | | | | | | | When CHECK_BITS_SET was added, they forgot to add a new command table, and instead overwrote the previous table. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
| * imximage: header.length of 4 is validTroy Kisky2015-10-07-2/+2
| | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* | Fix variation in timestamps caused by timezone differences.Vagrant Cascadian2015-10-11-5/+1
| | | | | | | | | | | | | | | | | | | | | | When building with SOURCE_DATE_EPOCH set, avoid use of mktime in default_image.c, which converts the timestamp into localtime. This causes variation based on timezone when building u-boot.img and u-boot-sunxi-with-spl.bin targets. Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Tested-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Paul Kocialkowski <contact@paulk.fr>
* | tools/mkimage.c: Clarify help text for -D slightlyTom Rini2015-10-11-1/+1
| | | | | | | | | | | | | | Try and make it clear that -D will replace all arguments passed to dtc and is not appending them. Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge git://git.denx.de/u-boot-marvellTom Rini2015-09-30-139/+125
|\ \
| * | tools: kwboot: Add support for UART boot mode patching for Armada XP/38xStefan Roese2015-10-01-139/+125
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, kwboot only allows dynamic UART boot mode patching for SoCs with header version 0 (Orion, Kirkwood). This patch now enables this "-p" feature also for SoCs with header version 1 (Armada XP / 38x etc). With this its possible now to use the UART boot mode without on images that are generated for other boot devices, like SPI. So no need to change BOOT_FROM to "uart" for UART xmodem booting any more. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
* | sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variantBernhard Nortmann2015-09-29-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch follows up on a discussion of ways to improve support for the sunxi FEL ("USB boot") mechanism, especially with regard to boot scripts, see: https://groups.google.com/d/msg/linux-sunxi/wBEGUoLNRro/rHGq6nSYCQAJ The idea is to convert the (currently unused) "pad" bytes in the SPL header into an area where data can be passed to U-Boot. To do this safely, we have to make sure that we're actually using our "sunxi" flavor of the SPL, and not the Allwinner boot0. The modified mksunxiboot introduces a special signature to the SPL header in place of the "pub_head_size" field. This can be used to reliably distinguish between compatible versions of sunxi SPL and anything else (older variants or Allwinner's boot0). Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: move SPL-related definitions to platform-specific includeBernhard Nortmann2015-09-29-16/+1
|/ | | | | | | | | | | | | The sunxi platform currently doesn't seem to make any use of the asm/arch-sunxi/spl.h file. This patch moves some declarations from tools/mksunxiboot.c into it. This enables us to reuse those definitions when extending the sunxi board code (boards/sunxi/boards.c). Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* tools: moveconfig: Update the URL for nds32 toolchainBin Meng2015-09-28-1/+1
| | | | | | | Give a full URL for a working nds32 toolchain for U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* tools: gen_eth_addr: add getpid() to time(0) to avoid duplicated seedJosh Wu2015-09-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | As 'time(0) | getpid()' will have a lot of duplicated value. It is not a expected behavior. We expect different value for the seed when when run it in many times. So this patch will left shift the getpid() and add to time(0). That avoid duplicated value. Test command is like: % RUN=0; while [ $RUN -lt 10000 ]; do tools/gen_eth_addr; RUN=$(($RUN+1)); done | sort | uniq | wc -l 10000 This patch is incorporated with suggestions made by Wolfgang Denk and Andreas Bießmann. Thanks them a lot. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Wolfgang Denk <wd@denx.de> Tested-by: Wolfgang Denk <wd@denx.de>
* mxs: mxsboot: fix endianess for sd boot imagesMichael Heimpold2015-09-13-9/+10
| | | | | | | | | | | | | | | | | | Running mxsboot on a big-endian system produces a sd image which cannot be started by the i.MX28 ROM. It complains on the debug uart as following: 0x8020a009 0x80502008 0x8020a009 0x80502008 ... Enforcing all fields within the BCB to little-endian make the image bootable again. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Marek Vasut <marex@denx.de>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-09-11-1/+1
|\
| * sunxi: Ensure that 'mksunxiboot' tool produces deterministic outputSiarhei Siamashka2015-09-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently some uninitialized padding bytes are written to the output file, as can be confirmed with valgrind: $ valgrind tools/mksunxiboot spl/u-boot-spl.bin spl/sunxi-spl.bin ==5581== Syscall param write(buf) points to uninitialised byte(s) ==5581== at 0x4F0F940: __write_nocancel (in /lib64/libc-2.20.so) ==5581== by 0x400839: main (in /tmp/u-boot/tools/mksunxiboot) ==5581== Address 0xffeff5d3c is on thread 1's stack ==5581== in frame #1, created by main (???) This patch fixes the problem by clearing the whole structure instead of just a portion of it. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | buildman: Improve the config comparison featureSimon Glass2015-09-09-44/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present buildman can compare configurations between commits but the feature is less useful than it could be. There is no summary by architecture and changes are not reported on a per-board basis. Correct these deficiencies so that it is possible to see exactly what is changing for any number of boards. Note that 'buildman -b <branch> -C' is recommended for any build where you will be comparing configuration. Without -C the correct configuration will not be reported since changes will often not be picked up. Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* | Revert "patman: use -D option for git format-patch"Masahiro Yamada2015-09-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 19b4a3369876f9215e2b861f211e8df1a75e26ca. Since that commit, patman generates useless patches for file removal; "git format -D" prints only the header but not the diff when deleting files, and "git am" always refuses such patches. The following is the quotation from "man git-format-patch": -D, --irreversible-delete Omit the preimage for deletes, i.e. print only the header but not the diff between the preimage and /dev/null. The resulting patch is not meant to be applied with patch nor git apply; this is solely for people who want to just concentrate on reviewing the text after the change. In addition, the output obviously lack enough information to apply such a patch in reverse, even manually, hence the name of the option. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: ifdtool: Support checking region overlap before U-BootBin Meng2015-09-09-20/+46
|/ | | | | | | | | | | We have the capability to check regions written after U-Boot that do not overlap. Since regions can also be written before U-Boot, add such check for these too. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Andy Pont <andy.pont@sdcsystems.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2015-09-03-11/+397
|\
| * rockchip: Drop first 32kb of zeros from the rkSD image typeSjoerd Simons2015-09-02-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of creating a rockchip SPL SD card image with 32KB of zeros which can be written to the start of an SD card, create the images with only the useful data that should be written to an offset of 32KB on the SD card. The first 32 kilobytes aren't needed for bootup and only serve as convenient way of accidentally obliterating your partition table. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add support for the SPI imageSimon Glass2015-09-02-0/+119
| | | | | | | | | | | | | | | | | | | | | | | | The Rockchip boot ROM requires a particular file format for booting from SPI. It consists of a 512-byte header encoded with RC4, some padding and then up to 32KB of executable code in 2KB blocks, separated by 2KB empty blocks. Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be converted to this format. This allows booting from SPI flash on supported machines. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add support for the SD imageSimon Glass2015-09-02-1/+103
| | | | | | | | | | | | | | | | | | | | | | The Rockchip boot ROM requires a particular file format. It consists of 64KB of zeroes, a 512-byte header encoded with RC4, and then some executable code. Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be converted to this format. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add the rkimage format to mkimageSimon Glass2015-09-02-0/+168
| | | | | | | | | | | | | | | | Rockchip SoCs require certain formats for code that they execute, The simplest format is a 4-byte header at the start of a binary file. Add support for this so that we can create images that the boot ROM understands. Signed-off-by: Simon Glass <sjg@chromium.org>
| * mkimage: Allow the original file size to be recordedSimon Glass2015-09-02-0/+1
| | | | | | | | | | | | | | | | Allow the image handler to store the original input file size so that it can reference it later. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
| * mkimage: Allow padding to any lengthSimon Glass2015-09-02-11/+12
| | | | | | | | | | | | | | | | At present there is an arbitrary limit of 4KB for padding. Rockchip needs more than that, so remove this restriction. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* | tools: mxsboot: calculate ECC block level dynamicallyJörg Krause2015-09-02-17/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | For pages of 2048 bytes the current setting of the ECC Error Correction Level is only true for an oob size of 64 bytes and wrong for all others. Instead of hard-coding every possible combination of page size and oob size use the dynamic calculation of the ECC strength introduced in commit 6121560d7714d6d8e41ce1687a1388a1a8fea4cb. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | tools/imximage: set DCD pointer to NULL when its length is 0Baruch Siach2015-09-02-1/+5
|/ | | | | | | | | | | | | | | | | When dcd_len is 0 the Write Data command that the set_dcd_rst_v2() routine generates is empty. This causes HAB to complain that the command is invalid. --------- HAB Event 1 ----------------- event data: 0xdb 0x00 0x0c 0x41 0x33 0x06 0xc0 0x00 0xcc 0x00 0x04 0x04 To fix this set the DCD pointer in the IVT to NULL in this case. The DCD header itself is still needed for detect_imximage_version() to determine the image version. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Stefano Babic <sbabic@denx.de>
* buildman: Correct 'Series-cover-cc' detection logicSimon Glass2015-08-31-1/+1
| | | | | | This requires 'Series-cover_cc' at present which is incorrect. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
* tools/atmelimage.c: Fix warning when debug is enabledTom Rini2015-08-28-1/+1
| | | | | | | | | | Otherwise we get: tools/atmelimage.c:134:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘size_t’ [-Wformat=] debug("atmelimage: interrupt vector #%d is 0x%08X\n", pos+1, ^ Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* kconfiglib: update to the latest versionUlf Magnusson2015-08-28-2252/+1906
| | | | | | | | | | | | | | | Corresponds to ba71a0e (Fix _parse_block() 'parent' documentation re. ifs.) from upstream, just adding the SPDX tag. Has performance improvements, code cleanup, Python 3 support, and various small fixes, including the following: - Unset user values when loading a zero-byte .config. (5e54e2c) - Ignore indented .config assignments. (f8a7510) - Do not require $srctree to be set for non-kernel projects. (d56e9c1) - Report correct locations in the presence of continuation lines. (0cebc87) Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
* patman: use -D option for git format-patchMasahiro Yamada2015-08-26-1/+1
| | | | | | | | This allows Patman to generate smaller patches for file removal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
* x86: ifdtool: Drop microcode from the device tree when collatingSimon Glass2015-08-26-2/+53
| | | | | | | | | | | | | | When ifdtool collates the microcode into one place it effectively creates a copy of the 'data' properties in the device tree microcode nodes. This is wasteful since we now have two copies of the microcode in the ROM. To avoid this, remove the microcode data from the device tree and shrink it down. This means that there is only one copy and the overall ROM space used by the microcode does not increase. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ifdtool: Support collating microcode into one placeSimon Glass2015-08-26-10/+55
| | | | | | | | | | | | | | | | | | | | | The Intel Firmware Support Package (FSP) requires that microcode be provided very early before the device tree can be scanned. We already support adding a pointer to the microcode data in a place where early init code can access. However this just points into the device tree and can only point to a single lot of microcode. For boards which may have different CPU types we must support multiple microcodes and pass all of them to the FSP in one place. Enhance ifdtool to scan all the microcode, place it together in the ROM and update the microcode pointer to point there. This allows us to pass multiple microcode blocks to the FSP using its existing API. Enable the flag in the Makefile so that this feature is used by default for all boards. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ifdtool: Split microcode linking into its own functionSimon Glass2015-08-26-27/+78
| | | | | | | | | | | The code to set up the microcode pointer in the ROM shares almost nothing with the write_uboot() function. Move it into its own function so it will be easier to extend. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ifdtool: Check that U-Boot does not overlap other regionsSimon Glass2015-08-26-11/+22
| | | | | | | | | | Since U-Boot and its device tree can grow we should check that it does not overlap the regions above it. Track the ROM offset that U-Boot reaches and check that other regions (written after U-Boot) do not interfere. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* logos: add Toradex logoStefan Agner2015-08-13-0/+0
| | | | | | | | | | | | | | Use the boot loader splash screen from WinCE which matches our wallpapers position wise. Although the logo is an 8-bit indexed BMP as well colours looked odd at first in U-Boot. After converting to full RGB palette and converting back to an indexed BMP using imagemagick the Logo showed up properly. $ convert tools/logos/toradex-rgb.bmp -type Palette -colors 256 \ -compress none -verbose BMP3:tools/logos/toradex.bmp Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* gitignore: Add defconfig and fdtgrepBin Meng2015-08-05-0/+1
| | | | | | | Ignore defconfig and tools/fdtgrep. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-02-27/+94
|\
| * imx: imximage: add new CHECK/CLR BIT commandAdrian Alonso2015-07-26-27/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Extend imximage DCD version 2 to support DCD commands CMD_WRITE_CLR_BIT 4 [address] [mask bit] means: while ((*address & ~mask) != 0); CMD_CHECK_BITS_SET 4 [address] [mask bit] means: while ((*address & mask) != mask); CMD_CHECK_BITS_CLR 4 [address] [mask bit] means: *address = *address & ~mask; * Add set_dcd_param_v2 helper function to set DCD command parameters Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
generated by cgit v1.1 at 2024-12-27 06:04:34 +0000