summaryrefslogtreecommitdiff
path: root/tools
Commit message (Collapse)AuthorAgeLines
* tools/imximage: set DCD pointer to NULL when its length is 0Baruch Siach2015-08-20-1/+5
| | | | | | | | | | | | | | | | | | | | | | | When dcd_len is 0 the Write Data command that the set_dcd_rst_v2() routine generates is empty. This causes HAB to complain that the command is invalid. --------- HAB Event 1 ----------------- event data: 0xdb 0x00 0x0c 0x41 0x33 0x06 0xc0 0x00 0xcc 0x00 0x04 0x04 To fix this set the DCD pointer in the IVT to NULL in this case. The DCD header itself is still needed for detect_imximage_version() to determine the image version. Conflicts: tools/imximage.c cherry-picked from http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=873bf926bfbb0a667158261813115fa6819661b7 Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Stefano Babic <sbabic@denx.de> (cherry picked from commit 873bf926bfbb0a667158261813115fa6819661b7)
* MLK-10567: Extend u-boot imximage to support check bits set/clrNitin Garg2015-04-29-8/+22
| | | | | | | | | | | Add support for HAB "Check data" all bits set and clear check functionality. Rename CHECK_DATA to CHECK_BITS_SET. Flag=0 -> (*address & mask) == 0 | All bits clear Flag=2 -> (*address & mask) == mask | All bits set Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit 0836912ef7a53d1f3d65f95556a34d03b8d65399)
* MLK-10186-2 imximage: support new commandPeng Fan2015-04-29-18/+88
| | | | | | | | | | | | | | | | | Since rom code supports clear bit and check data command, and new ddrc needs such commands, add clear bit and check data command in imximage.c. CHECK_DATA 4 xxxx bit This command is dead loop until bit set at address xxxx. CLR_BIT 4 xxxx bit This command is to clear bit at address xxxx. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 257600d197bf9a58a2b8d08419296aaf901d850d) Conflicts: tools/imximage.c
* MLK-10186-1 imximage: add fixed IVT offset supportYe.Li2015-04-29-0/+10
| | | | | | | | | | | | Since from mx7, we use fixed IVT offset for all boot devices. Introduce a new configuration CONFIG_IMX_FIXED_IVT_OFFSET for this. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 88e0a3552b08627b18d98380a32dbafacb18854b) Conflicts: tools/imximage.h
* MLK-10774-25 imx:imximage add plugin supportPeng Fan2015-04-29-52/+221
| | | | | | | This patch is from commit 441fd86d055c57b79257943449a8101b83e98c61 Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* lpc32xx: add lpc32xx-spl.bin boot image targetAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+179
| | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-04-03-1/+1
|\ | | | | | | | | | | | | Conflicts: board/armltd/vexpress64/vexpress64.c Signed-off-by: Tom Rini <trini@konsulko.com>
| * ARM: tegra: rename colibri_t20 board/configuration/device-treeMarcel Ziswiler2015-03-30-1/+1
| | | | | | | | | | | | | | | | | | | | | | In accordance with our other modules supported by U-Boot and as agreed upon for Apalis/Colibri T30 get rid of the carrier board in the board/ configuration/device-tree naming. While at it also bring the prompt more in line with our other products. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Patch to mkenvimage to handle text files with length that exceed env sizeBrian McFarland2015-03-28-7/+22
|/ | | | | | | | | | | | | | | | | | | | | | | | The current head revision of mkenvimage (e72be8947e129f5ab274c0a9f235d2cc0014b2ea) will prevent you from creating an env image from a text file that is larger than the env length specified by the '-s' option. That doesn't make sense given that the tool now allows comments and blank lines. This patch removes that limitation and allows longer text files to be used. I don't have time / desire at the moment to figure out "patman" and could really care less if this is adopted up stream. Just figured I would share in case anybody else finds it useful enough to take time to do a proper patch. >From 39ff30190c2bf687861f4b4b33230f1944fb64f9 Mon Sep 17 00:00:00 2001 From: Brian McFarland <bmcfarland@rldrake.com> Date: Thu, 12 Mar 2015 11:37:19 -0400 Subject: [PATCH] In mkenvimage, removed the check that prevented using a source text file larger than the output environment image. Instead, the main parsing loop checks to see if the environment buffer is full, and quits if it is. After the main parse loop, a second loop swallows comments and whitespace until either the EOF is reached or more env vars are found, in which case an error will be thrown.
* Merge branch 'buildman' of git://git.denx.de/u-boot-x86Tom Rini2015-03-05-5/+9
|\
| * buildman: Add a space before the list of boardsSimon Glass2015-03-05-2/+2
| | | | | | | | | | | | | | | | | | | | Tweak the output slightly so we don't get things like: - board1 board2+ board3 board4 There should be a space before the '+'. Signed-off-by: Simon Glass <sjg@chromium.org>
| * buildman: Correct toolchain download featureSimon Glass2015-03-05-3/+7
| | | | | | | | | | | | | | | | | | | | Commit d908898 updated the ScanPath() function but not its documentation and not all its callers. This breaks the toolchain check after it is downloaded. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
* | kwbimage: align v1 binary header to 4BChris Packham2015-03-05-0/+1
|/ | | | | | | | | According to the Armada-XP documentation the binary header format requires the header length to be aligned to 4B. Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
* add example for file on VFAT filesystem usageWaldemar Brodkorb2015-02-17-0/+3
| | | | | | | | For example on a raspberry pi the u-boot environment can be saved in a file on the first VFAT partition. This example illustrates how to use it with fw_printenv/fw_setenv. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-02-17-6/+8
|\
| * tools: mksunxiboot: Fix problems on big endian systemsSiarhei Siamashka2015-02-16-6/+8
| | | | | | | | | | | | | | | | Now my PS3 can be also used to build u-boot for sunxi devices. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | tools/imagetool: remove linker scriptAndreas Bießmann2015-02-16-55/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a93648d197df48fa46dd55f925ff70468bd81c71 introduced linker generated lists for imagetool which is the base for some host tools (mkimage, dumpimage, et al.). Unfortunately some host tool chains do not support the used type of linker scripts. Therefore this commit broke these host-tools for them, namely FreeBSD and Darwin (OS/X). This commit tries to fix this. In order to have a clean distinction between host and embedded code space we need to introduce our own linker generated list instead of re-using the available linker_lists.h provided functionality. So we copy the implementation used in linux kernel script/mod/file2alias.c which has the very same problem (cause it is a host tool). This code also comes with an abstraction for Mach-O binary format used in Darwin systems. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
* | buildman: allow multiple toolchains in a single pathAlbert ARIBAUD2015-02-15-4/+5
| | | | | | | | | | | | | | | | | | | | | | When buildman scans a toolchain path, it stops at the first toolchain found. However, a single path can contains several toolchains, each with its own prefix. This patch lets buildman scan all toolchains in the path. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Simon Glass <sjg@chromium.org>
* | patman: Read in the git-mailrc alias fileSimon Glass2015-02-15-0/+27
| | | | | | | | | | | | | | | | | | | | | | We should read this file to obtain a set of aliases. This reduces the need to create them in the ~/.patman file. This feature did exist in some version of patman, and is mentioned in the help but it did not find its way upstream. Reported-by: Graeme Russ <gruss@tss-engineering.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* | buildman: Fix incorrect arguemnt in GetUpstream()Simon Glass2015-02-15-1/+1
|/ | | | | | | | This causes an error when trying to build a local branch which has a local branch as its upstream. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2015-02-10-20/+70
|\
| * x86: Enhance the microcode tool to support header files as inputSimon Glass2015-02-05-20/+70
| | | | | | | | | | | | | | | | | | Sometimes microcode is delivered as a header file. Allow the tool to support this as well as collecting multiple microcode blocks into a single update. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-02-10-0/+10
|\ \
| * | imx: imximage: Add QuadSPI boot supportYe.Li2015-02-10-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add QuadSPI boot support to imximage tool. Note: The QuadSPI configuration parameters at offset 0x400 are not included in this patch. Need other tools to generate the parameters part. Signed-off-by: Ye.Li <B37916@freescale.com>
| * | arm: mx6: cm-fx6: display compulab logoNikita Kiryanov2015-01-29-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add compulab logo and display it on boot. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | mxsboot : Support of 224-bytes OOB area lengthAlexandre Coffignal2015-01-19-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the NAND Flash chip with page size of 4096+224-bytes OOB area length For example Micron MT29F4G08 NAND flash device defines a OOB area which is 224 bytes long (oobsize). Signed-off-by: Alexandre Coffignal <acoffignal@geral.com>
* | | kwbimage: Make the Makefile pass in CONFIG_SYS_SPI_U_BOOT_OFFSTom Rini2015-02-07-1/+4
| | | | | | | | | | | | | | | | | | | | | We can't use config.h directly as some platforms include headers that aren't safe to use in normal Linux userland. Signed-off-by: Tom Rini <trini@ti.com>
* | | tools: kwbimage: Support u-boot.img padding to CONFIG_SYS_SPI_U_BOOT_OFFSStefan Roese2015-02-06-0/+11
| |/ |/| | | | | | | | | | | | | | | This is used on the AXP boards, to pad u-boot.img to the desired offset in SPI flash (only this boot target supported right now). This offset is used by the SPL then to load u-boot.img into SDRAM and execute it there. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
* | Merge branch 'patman' of git://git.denx.de/u-boot-x86Tom Rini2015-01-31-20/+21
|\ \
| * | patman: Explain how to make doc/git-mailrc workSimon Glass2015-01-30-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | Add an explanation for how to set up git so that patman can find the alias file. Fix up the get_maintainers message too. Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | patman: Check commit_match before stripping leading whitespaceScott Wood2015-01-30-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | True commit lines start at column zero. Anything that is indented is part of the commit message instead. I noticed this by trying to run buildman with commit e3a4facdfc07179ebe017a07b8de6224a935a9f3 as master, which contained a reference to a Linux commit inside the commit message. ProcessLine saw that as a genuite commit line, and thus buildman tried to build it, and died with an exception because that SHA is not present in the U-Boot tree. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | patman: Make dry-run output match real functionalityPeter Tyser2015-01-30-14/+10
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When run with the --dry-run argument patman prints out information showing what it would do. This information currently doesn't line up with what patman/git send-email really do. Some basic examples: - If an email address is addressed via "Series-cc" and "Patch-cc" patman shows that email address would be CC-ed two times. - If an email address is addressed via "Series-to" and "Patch-cc" patman shows that email address would be sent TO and CC-ed. - If an email address is addressed from a combination of tag aliases, get_maintainer.pl output, "Series-cc", "Patch-cc", etc patman shows that the email address would be CC-ed multiple times. Patman currently does try to send duplicate emails like the --dry-run output shows, but "git send-email" intelligently removes duplicate addresses so this patch shouldn't change the non-dry-run functionality. Change patman's output and email addressing to line up with the "git send-email" logic. This trims down patman's dry-run output and prevents confusion about what patman will do when emails are actually sent. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-dmTom Rini2015-01-30-1/+3
|\ \
| * | Use hash.c in mkimageRuchika Gupta2015-01-29-0/+1
| | | | | | | | | | | | | | | | | | Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> CC: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| * | rsa: Split the rsa-verify to separate the modular exponentiationRuchika Gupta2015-01-29-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Public exponentiation which is required in rsa verify functionality is tightly integrated with verification code in rsa_verify.c. The patch splits the file into twp separating the modular exponentiation. 1. rsa-verify.c - The file parses device tree keys node to fill a keyprop structure. The keyprop structure can then be converted to implementation specific format. (struct rsa_pub_key for sw implementation) - The parsed device tree node is then passed to a generic rsa_mod_exp function. 2. rsa-mod-exp.c Move the software specific functions related to modular exponentiation from rsa-verify.c to this file. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> CC: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* | tools: do not print error messages in verify_header() functionsGuilherme Maciel Ferreira2015-01-29-11/+12
| | | | | | | | | | | | | | | | | | | | | | default_image.c and socfpgaimage.c are the only image modules that print error messages during header verification. The verify_header() is used to query if a given image file is processed by the image format. Thus, if the image format can't handle the file, it must simply return an error. Otherwise we pollute the screen with errors messages until we find the image format that handle a given image file. Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
* | dumpimage: fit: extract FIT imagesGuilherme Maciel Ferreira2015-01-29-1/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dumpimage is able to extract components contained in a FIT image: $ ./dumpimage -T flat_dt -i CONTAINER.ITB -p INDEX FILE The CONTAINER.ITB is a regular FIT container file. The INDEX is the poisition of the sub-image to be retrieved, and FILE is the file (path+name) to save the extracted sub-image. For example, given the following kernel.its to build a kernel.itb: /dts-v1/; / { ... images { kernel@1 { description = "Kernel 2.6.32-34"; data = /incbin/("/boot/vmlinuz-2.6.32-34-generic"); type = "kernel"; arch = "ppc"; os = "linux"; compression = "gzip"; load = <00000000>; entry = <00000000>; hash@1 { algo = "md5"; }; }; ... }; ... }; The dumpimage can extract the 'kernel@1' node through the following command: $ ./dumpimage -T flat_dt -i kernel.itb -p 0 kernel Extracted: Image 0 (kernel@1) Description: Kernel 2.6.32-34 Created: Wed Oct 22 15:50:26 2014 Type: Kernel Image Compression: gzip compressed Data Size: 4040128 Bytes = 3945.44 kB = 3.85 MB Architecture: PowerPC OS: Linux Load Address: 0x00000000 Entry Point: 0x00000000 Hash algo: md5 Hash value: 22352ad39bdc03e2e50f9cc28c1c3652 Which results in the file 'kernel' being exactly the same as '/boot/vmlinuz-2.6.32-34-generic'. Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
* | dumpimage: replace the term "datafile" by "subimage"Guilherme Maciel Ferreira2015-01-29-18/+19
| | | | | | | | Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
* | dumpimage: add 'T' option to explicitly set the image typeGuilherme Maciel Ferreira2015-01-29-39/+37
| | | | | | | | | | | | | | | | | | | | Some image types, like "KeyStone GP", do not have magic numbers to distinguish them from other image types. Thus, the automatic image type discovery does not work correctly. This patch also fix some integer type mismatches. Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
* | imagetool: replace image registration function by linker_lists featureGuilherme Maciel Ferreira2015-01-29-376/+254
| | | | | | | | | | | | | | | | | | The registration was introduced in commit f86ed6a8d52c99bb2d17d3cac1647edca0c4399c This commit also removes all registration functions, and the member "next" from image_type_params struct Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
* | imagetool: make the image_save_datafile() available to all image typesGuilherme Maciel Ferreira2015-01-29-27/+45
| | | | | | | | | | | | | | | | Move the image_save_datafile() function from an U-Multi specific file (default_image.c) to a file common to all image types (image.c). And rename it to genimg_save_datafile(), to make clear it is useful for any image type. Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
* | imagetool: move common code to imagetool moduleGuilherme Maciel Ferreira2015-01-29-130/+90
|/ | | | | | | The get_type() and verify_print_header() functions have the same code on both dumpimage.c and mkimage.c modules. Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
* buildman: Add an option to write the full build outputSimon Glass2015-01-14-3/+9
| | | | | | | | Normally buildman runs with 'make -s' meaning that only errors and warnings appear in the log file. Add a -V option to run make in verbose mode, and with V=1, causing a full build log to be created. Signed-off-by: Simon Glass <sjg@chromium.org>
* buildman: Add the option to download toolchains from kernel.orgSimon Glass2015-01-14-13/+303
| | | | | | | | | | | | | The site at https://www.kernel.org/pub/tools/crosstool/ is a convenient repository of toolchains which can be used for U-Boot. Add a feature to download and install a toolchain for a selected architecture automatically. It isn't clear how long this site will stay in the current place and format, but we should be able to rely on bug reports if it changes. Suggested-by: Marek Vašut <marex@denx.de> Suggested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* buildman: Allow architecture to alias to multiple toolchainsSimon Glass2015-01-14-5/+23
| | | | | | | Some archs have need than one alias, so support a list of alises in the ..buildman file. Signed-off-by: Simon Glass <sjg@chromium.org>
* buildman: Don't use the local settings when running testsSimon Glass2015-01-14-1/+14
| | | | | | | We should create a test setting file when running testes, not use whatever happens to be on the local machine. Signed-off-by: Simon Glass <sjg@chromium.org>
* buildman: Don't complain about missing sections in ~/.buildmanSimon Glass2015-01-14-1/+0
| | | | | | Silently ignore this since it is valid to have missing sections. Signed-off-by: Simon Glass <sjg@chromium.org>
* buildman: Add documentation about the .buildman fileSimon Glass2015-01-14-20/+53
| | | | | | | This file is only partially documented. Add some more details. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
* buildman: Add a note about Python pre-requisitesSimon Glass2015-01-14-1/+10
| | | | | | | | Since we need a few modules which might not be available in a bare-bones distribution, add a note about that to the README. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
* buildman: Add an option to use the full tool chain pathSimon Glass2015-01-14-10/+25
| | | | | | | | | | | | | | In some cases there may be multiple toolchains with the same name in the path. Provide an option to use the full path in the CROSS_COMPILE environment variable. Note: Wolfgang mentioned that this is dangerous since in some cases there may be other tools on the path that are needed. So this is set up as an option, not the default. I will need test confirmation (i.e. that this commit fixes a real problem) before merging it. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Steve Rae <srae@broadcom.com>