summaryrefslogtreecommitdiff
path: root/tools/kwboot.c
Commit message (Collapse)AuthorAgeLines
* tools: kwboot: don't adjust destaddr when patching the imageChris Packham2017-02-17-8/+0
| | | | | | | | | | Commit 94084eea3bd3 ("tools: kwbimage: Fix dest addr") changed kwbimage to do this adjustment. So now the adjustment in kwboot is not needed (and would prevent UART booting for images generated by the new kwbimage). Remove the destaddr adjustment in kwboot. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* tools: kwboot: patch destaddr only for SoCs with header version 1Simon Baatz2016-08-26-8/+8
| | | | | | | | | | | | | | | | | Commit f4db6c976cf ("arm: mvebu: Add runtime detection of UART (xmodem) boot-mode") added a change to hdr->destaddr when dynamically patching an image for UART boot mode. With this change, kwboot ceases to work on Kirkwood. Thus, let's change hdr->destaddr only when we are patching an image with header version 1 (Orion and Kirkwood use header version 0). Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Fixes: f4db6c976cf ("arm: mvebu: Add runtime detection of UART (xmodem) boot-mode") Cc: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Kevin Smith <kevin.smith@elecsyscorp.com> Signed-off-by: Stefan Roese <sr@denx.de>
* tools: kwboot: Add xmodem timeout optionKevin Smith2016-03-24-2/+9
| | | | | | | | | | | | Add command-line specification of xmodem timeout. If the binary header needs to take a while to do something (e.g. DDR ECC scrubbing), the xmodem transfer can time out. Add a configurable xmodem block timeout to allow transfers with slow binary headers to succeed. Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* tools: kwboot: Clean up usage textKevin Smith2016-03-24-1/+1
| | | | | | | | | | | Usage text was getting unwieldy and somewhat incorrect. The usage summary implied that some options were mutually exclusive (e.g. -q or -s). Clean up the summary to just include the important ones, and include a generic "[OPTIONS]" instead. Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* arm: mvebu: Add runtime detection of UART (xmodem) boot-modeStefan Roese2016-01-14-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds runtime detection of the Marvell UART boot-mode (xmodem protocol). If this boot-mode is detected, SPL will return to the BootROM to continue the UART booting. With this patch its now possible, to generate a U-Boot image that can be booted either from the strapped boot-device (e.g. SPI NOR, MMC, etc) or via the xmodem protocol from the UART. In the UART case, the kwboot tool will dynamically insert the UART boot-device type into the image. And also patch the load address in the header, so that the mkimage header will be skipped (as its not expected by the Marvell BootROM). This simplifies the development for Armada XP / 38x based boards. As no special images need to be generated by selecting the MVEBU_BOOTROM_UARTBOOT Kconfig option. Since the Kconfig option MVEBU_BOOTROM_UARTBOOT is not needed any more, its now completely removed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
* tools: kwboot: Add support for UART boot mode patching for Armada XP/38xStefan Roese2015-10-01-10/+27
| | | | | | | | | | | | | | Currently, kwboot only allows dynamic UART boot mode patching for SoCs with header version 0 (Orion, Kirkwood). This patch now enables this "-p" feature also for SoCs with header version 1 (Armada XP / 38x etc). With this its possible now to use the UART boot mode without on images that are generated for other boot devices, like SPI. So no need to change BOOT_FROM to "uart" for UART xmodem booting any more. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
* tools/kwboot: Add parameters to set delay and timeout via cmdlineStefan Roese2015-06-14-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | To support the Armada 38x, new values for the request-delay and the response-timeout are needed. As the values already implemented in this tool (for Kirkwood and Armada XP) don't seem to work here. To make this more flexible, lets add make those 2 parameters configurable via the cmdline. Here the new parameters: -q <req-delay>: use specific request-delay -s <resp-timeo>: use specific response-timeout For the Marvell DB-88F6820 these values are known to work: One board: -q 2 -s 1 2nd board: -q 5 -s 5 So this seems to be even board specific. But with this patch now those values can be specified and tested via the cmdline. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Kevin Smith <kevin.smith@elecsyscorp.com> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Luka Perkov <luka.perkov@sartura.hr>
* tools/kwboot: Sync with latest barebox version to support Armada XPStefan Roese2014-10-23-14/+97
| | | | | | | | | | | | | The barebox version of the kwboot tool has evolved a bit. To support Armada XP and Dove. Additionally a few minor fixes have been applied. So lets sync with the latest barebox version. Please note that the main difference between both versions now is, that the U-Boot version still supports the -p option, to dynamically patch an image for UART boot mode. I didn't test it now though. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org>
* kwboot: boot kirkwood SoCs over a serial linkLuka Perkov2012-07-07-0/+742
The kwboot program boots boards based on Marvell's Kirkwood platform via Xmodem over their integrated UART. Signed-off-by: Daniel Stodden <daniel.stodden@googlemail.com> Acked-by: Luka Perkov <uboot@lukaperkov.net> Tested-By: Holger Brunck <holger.brunck@keymile.com> Tested-By: David Purdy <david.c.purdy@gmail.com> Tested-by: Simon Guinot <simon.guinot@sequanux.org>