summaryrefslogtreecommitdiff
path: root/test/py
Commit message (Collapse)AuthorAgeLines
* test/py: expose config and log as session scoped fixtureStefan Brüns2016-11-21-0/+26
| | | | | | | | | If a test uses a fixture which is expensive to setup, the fixture can possibly created with session or module scope. As u_boot_console has function scope, it can not be used in this case. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* test/py: ensure a log section exists for skipped testsStephen Warren2016-10-23-1/+12
| | | | | | | | | | | | | | | In pytest 3, runtestprotocol() may not call pytest_runtest_setup() if the test is skipped. That call is required to create a section for the test in the log file. If this is skipped, the call to log.end_section() at the tail of pytest_runtest_protocol() will throw an exception. This patch ensures that a log section always exists, both to avoid the exception and to ensure that a consistently structured log file is always created. Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reported-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Tom Rini <trini@konsulko.com>
* test/py/tests/test_sleep.py: Add check for CONFIG_CMD_MISCTom Rini2016-10-14-0/+2
| | | | | | | We can only run this command if the sleep command is enabled and that depends on CONFIG_CMD_MISC Signed-off-by: Tom Rini <trini@konsulko.com>
* test: add NFS download testGuillaume GARDET2016-10-13-0/+49
| | | | | | | | | | | | | | Add a NFS download test, based on TFTP test. Tested on i.MX6 SabreLite board. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@konsulko.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* test/py/tests/test_vboot.py: Add check that we boot the imageTom Rini2016-09-22-6/+10
| | | | | | | | | | | | Make sure that when we're telling bootm to boot an image, and we expect the image to boot we get the output from sandbox that we attempted to run Linux and that U-Boot completed its job. Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com>
* test/py: match prompt only at line boundariesStephen Warren2016-08-20-3/+3
| | | | | | | | | | | This prevents capture of command output from terminating early on boards that use a simple prompt (e.g. "=> ") that appears in the middle of command output (e.g. crc32's "... ==> 2fa737e0"). Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* test: Adjust run_command_list() to return a list of stringsSimon Glass2016-08-05-4/+5
| | | | | | | | Return one string for each command that was executed. This seems cleaner. Suggested-by: Teddy Reed <teddy.reed@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* test: Add a function to restart U-BootSimon Glass2016-08-05-2/+8
| | | | | | | | | | | Add a proper function for this rather than using internal functions. Use it in the single call site. Also, do a restart at the end of the vboot test to reset to the normal device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Stephen Warren <swarren@nvidia.com>
* test: vboot: Put each test variant in its own sectionSimon Glass2016-08-05-5/+5
| | | | | | | | | Use 'cons.log.section' feature to split up the test output. This makes it easier to read. Suggested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* test: Rename sha to sha_algo and pass it aroundSimon Glass2016-08-05-25/+28
| | | | | | | | | | Rename this argument and pass it to each function that needs it, instead of making it global. Suggested-by: Stephen Warren <swarren@nvidia.com> Suggested-by: Teddy Reed <teddy.reed@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* test: Drop the cmd() functionSimon Glass2016-08-05-24/+17
| | | | | | | | | Instead of this, use the existing run_and_log() function, enhanced to support a command string as well as a list of arguments. Suggested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* test: Fix typos in commentsSimon Glass2016-08-05-10/+10
| | | | | | | | Fix some typos in various files introduced with the vboot test conversion. Reported-by: Teddy Reed <teddy.reed@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* test: Check exit status in run_and_log_expect_exception()Simon Glass2016-08-05-1/+5
| | | | | | | | This check was missed. Add it and make the message more verbose. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Tom Rini <trini@konsulko.com> Fixes: 9e17b034 (test/py: Provide a way to check that a command fails)
* test: Fix typos and tidy upSimon Glass2016-08-05-2/+4
| | | | | | | | | | Fix review comments that were missed at the time. Also explain why we need to regenerate the device tree for each test. Reported-by: Teddy Reed <teddy.reed@gmail.com> Suggested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: f6349c3c (test: Add a README)
* test/py: vboot can be run only at SandboxMichal Simek2016-07-22-0/+1
| | | | | | | | | | | | | | | Getting this error: Zynq> sb load hostfs - 100 /home/monstr/data/disk/u-boot/build-zynq_zc706/test.fit Unknown command 'sb' - try 'help' because sb command is present only for Sandbox obj-$(CONFIG_SANDBOX) += host.o that's why mark this test to be run only at Sandbox Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Simon Glass <sjg@chromium.org>
* test/py: use absolute dts path in vboot testStephen Warren2016-07-22-1/+1
| | | | | | | | | Without this, the test fails if the test is run with a cwd other than the root of the U-Boot source tree. Fixes: 8729d582595d ("test: Convert the vboot test to test/py") Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* test: Adjust the of-platdata test run conditionSimon Glass2016-07-16-1/+1
| | | | | | | This should be spl_of_platdata, since otherwise it will try to run on boards that don't support of-platdata. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-07-15-3/+72
|\
| * dm: Add a test for of-platdataSimon Glass2016-07-14-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a simple test which checks that the of-platdata system is working correctly. The sequence is as follows: - SPL starts up and probes all the UCLASS_MISC drivers - There are 3 of these in sandbox.dts - Therefore there should be 3 U_BOOT_DEVICE() declarations in dt-platdata.c - These should produce 3 sandbox_spl_test devices - Each device prints out its platform data when probed - This test checks for this output and compares it against expectations Signed-off-by: Simon Glass <sjg@chromium.org>
| * test/py: Start sandbox SPL when enabledSimon Glass2016-07-14-1/+5
| | | | | | | | | | | | | | When sandbox SPL is enabled we want to start that rather than U-Boot proper, since some tests may rely on running it first. Signed-off-by: Simon Glass <sjg@chromium.org>
| * test/py: Provide a way to get early console outputSimon Glass2016-07-14-0/+23
| | | | | | | | | | | | | | Some tests want to check the console output from SPL or U-Boot proper. Provide a means to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
| * test/py: Note which console produced unexpected outputSimon Glass2016-07-14-1/+1
| | | | | | | | | | | | | | | | At present the SPL and U-Boot consoles both present the same error message when the expected console output does not appear. Add "SPL" to the SPL error message to resolve this ambiguity. Signed-off-by: Simon Glass <sjg@chromium.org>
| * test/py: Handle testing with the sandbox_spl boardSimon Glass2016-07-14-1/+1
| | | | | | | | | | | | | | | | | | | | This board can sometimes be used for tests. Handle it the same way as sandbox. Note: I plan to drop the sandbox_spl board at some point and merge its features into sandbox. So this commit may not be necessary. Signed-off-by: Simon Glass <sjg@chromium.org>
* | test: Convert the vboot test to test/pySimon Glass2016-07-14-0/+376
| | | | | | | | | | | | | | | | Now that we have a suitable test framework we should move all tests into it. The vboot test is a suitable candidate. Rewrite it in Python and move the data files into an appropriate directory. Signed-off-by: Simon Glass <sjg@chromium.org>
* | test/py: Add a helper to run a list of U-Boot commandsSimon Glass2016-07-14-0/+16
| | | | | | | | | | | | | | Some tests want to execute a sequence of commands. Add a helper for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
* | test/py: Provide a way to check that a command failsSimon Glass2016-07-14-0/+22
| | | | | | | | | | | | | | | | Sometimes we want to run a command and check that it fails. Add a function to handle this. It can check the return code and also make sure that the output contains a given error message. Signed-off-by: Simon Glass <sjg@chromium.org>
* | test/py: Add an option to execute a string containing a commandSimon Glass2016-07-14-0/+12
| | | | | | | | | | | | | | | | It is sometimes inconvenient to convert a string into a list for execution with run_and_log(). Provide a helper function to do this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
* | test/py: Return output from run_and_log()Simon Glass2016-07-14-2/+3
| | | | | | | | | | | | | | | | It is useful to be able to obtain the output from a command. Return it from this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
* | test/py: Provide output from exceptions with RunAndLog()Simon Glass2016-07-14-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Tests may want to look at the output from running a command, even if it fails (e.g. with a non-zero return code). Provide a means to obtain this. Another approach would be to return a class object containing both the output and the exception, but I'm not sure if that would result in a lot of refactoring. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
* | test/py: Allow RunAndLog() to return the outputSimon Glass2016-07-14-1/+2
| | | | | | | | | | | | | | | | Tests may want to look at the output from running a command. Return it so that this is possible. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
* | test/py: Allow tests to control the sandbox device-tree fileSimon Glass2016-07-14-1/+2
|/ | | | | | | | | | | | Normally tests will run with the test.dtb file designed for this purpose. However, the verified boot tests need to run with their own device-tree file, containing a public key. Make the device-tree file a config option so that it can be adjusted by tests. The default is to keep the current behaviour. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
* test/py: support 'memstart =' in u_boot_utils.find_ram_base()Daniel Schwierzeck2016-07-08-1/+1
| | | | | | | | | | Some archs like MIPS or PPC have a different 'bdinfo' output than ARM regarding the memory configuration. Also support 'memstart = 0x*' in u_boot_utils.find_ram_base() to make all tests requiring the RAM base working on those archs. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* test/py: strip VT100 codes from match bufferStephen Warren2016-07-08-0/+9
| | | | | | | | | | | | | | | | | | | | | Prior to this patch, any VT100 codes emitted by U-Boot are considered part of a command's output, which often causes tests to fail. For example, test_env_echo_exists executes printenv, and then considers any text on a line before an = sign as a valid U-Boot environment variable name. This includes any VT100 codes emitted. When the test later attempts to use that variable, the name would be invalid since it includes the VT100 codes. Solve this by stripping VT100 codes from the match buffer, so they are never seen by higher level test code. The codes are still logged unmodified, so that users can expect U-Boot's exact output without interference. This does clutter the log file a bit. However, it allows users to see exactly what U-Boot emitted rather than a modified version, which hopefully is better for debugging. It's also much simpler to implement, since logging happens as soon as text is received, and so stripping the VT100 codes from the log would require handling reception and stripping of partial VT100 codes. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* test/py: fix CONFIG_ testsStephen Warren2016-07-08-5/+5
| | | | | | | | | | | Some CONFIG_ variables were recently renamed, but test/py wasn't updated to match. This causes some tests to be skipped. Fix test/py so the tests are run. Fixes: 11636258981a ("Rename reset to sysreset") Fixes: f1f9d4fac527 ("hush: complete renaming CONFIG_SYS_HUSH_PARSER to CONFIG_HUSH_PARSER") Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* test/py: fix printenv signon message disable codeStephen Warren2016-06-19-1/+2
| | | | | | | | | | | CONFIG_VERSION_VARIABLE isn't always defined, so we can't simply look up its value directly, or an exception will occur if it isn't defined. Instead, we must use .get() to supply a default value if the variable isn't defined. Fixes: da37f006e7c5 ("tests: py: disable main_signon check for printenv cmd") Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* tests: py: disable main_signon check for printenv cmdHeiko Schocher2016-06-09-1/+5
| | | | | | | | | | | | if CONFIG_VERSION_VARIABLE is set, the U-Boot environment contains a "vers" variable with the current U-Boot version string. If now "printenv" is called, test/py fails as it detects the main_sign string, which is in this case correct. So check only the main_sign as an error, if CONFIG_VERSION_VARIABLE is not set. Signed-off-by: Heiko Schocher <hs@denx.de>
* test/py: Support setting up specific timeoutMichal Simek2016-05-27-0/+31
| | | | | | | | | | | | | | Large file transfers, flash erasing and more complicated tests requires more time to finish. Provide a way to setup specific timeout directly in test. For example description for 50s test: timeout = 50000 with u_boot_console.temporary_timeout(timeout): u_boot_console.run_command(...) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* test/py: fix NameError exception if bdi cmd is not supportedHeiko Schocher2016-05-27-0/+1
| | | | | | | | | | | | test/py raises an error, if a board has not enabled bdi command > pytest.skip('bdinfo command not supported') E NameError: global name 'pytest' is not defined import pytest in test/py/u_boot_utils.py fixes this. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* tests: py: fix NameError exception if bdi cmd is not supportedHeiko Schocher2016-05-13-0/+1
| | | | | | | | | | | | test/py raises an error, if a board has not enabled bdi command > pytest.skip('bdinfo command not supported') E NameError: global name 'pytest' is not defined import pytest in test/py/u_boot_utils.py fixes this. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* test/py: dfu: wait for USB device to go away at bootStephen Warren2016-05-06-0/+2
| | | | | | | | | | | | | It can take a while for a host machine to notice that a USB device has disconnected, and process the change. At the end of the DFU test, we wait up to 10 seconds for this to happen. This change makes the test wait the same (up to) 10 seconds at the start of the test for any previously active USB device-mode session to be cleaned up. Such as session might have been used to download U-Boot into memory for example; this is certainly true on my Tegra test systems. This changes should solve the DFU test intermittency issues I've been seeing on some Tegra devices. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* tests: py: dfu: Provide functionality to set test and dummy files alt settingsLukasz Majewski2016-04-25-5/+21
| | | | | | | | | | | | | | | | | | | | After concatenation of "dfu_alt_info" variable from "dfu_alt_boot" and "dfu_alt_system" it may happen that test and dummy files alt settings are different than default 0 and 1. This patch provides the ability to set different values for them. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com> --- Changes for v3: - replace variables declarations with ones read from configuration file - remove not necessary str() conversion at DFU host command generation Changes for v2: - generate "alt_info" automatically - use file names as alt settings instead of numerical values - extend in-code documentation
* tests: py: dfu: Add functionality to set different u-boot's dfu env variableLukasz Majewski2016-04-25-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By default (on almost all systems) the dfu env variable, which defines available alt settings, is named as "dfu_alt_info". However on some platforms (i.e. Odroid XU3), the 'dfu_alt_info' is concatenated from other variables - namely 'dfu_alt_boot' and 'dfu_alt_system' at run time (when one types 'dfu 0 mmc 0' for first time). 'dfu_alt_boot' describes alt settings which depend on boot medium - for example boot loader's LBA sectors which are different on eMMC and SD card because of e.g. MBR/GPT. 'dfu_alt_system' describes board agnostic alt settings - like rootfs, kernel. On such system we can only append/modify this env variable. Because of the above, we must have way to modify other than "dfu_ale_info" variable to perform tests. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com> --- Changes for v3: - None Changes for v2: - Rewrite of "alt_info_env_name" variable description - Use of get() method on python's dictionary to easily obtain default value
* tests: py: dfu: Add variables to store dfu alt numbers for test and dummy filesLukasz Majewski2016-04-25-4/+8
| | | | | | | | | | | | | This patch replaces hardcoded (i.e. 0 and 1) values passed to dfu_{read|write} with variables. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com> --- Changes for v3: - Replace per module global variables with ones defined inside a function Changes for v2: - None
* test/py: README: link to example hook scriptsStephen Warren2016-04-11-0/+6
| | | | | | | | | | When implementing test/py hook scripts, it's helpful to read some working examples. Provide a link to some. The link was mentioned in the commit message which first added test/py, but not in any documentation file. Suggested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* test/py: Add support for loading image via tftp to specified locationMichal Simek2016-04-11-1/+5
| | | | | | | | | | | | | | For example this setting: env__net_tftp_readable_file = { "fn": "ep108/image.ub", "addr": 0x10000000, "size": 25846296, "crc32": "b726f9de", } Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* test/py: pass -v option when executing sandboxStephen Warren2016-04-11-0/+1
| | | | | | | | | This shows more output, such as the internal output generated by the unit test ("ut") command, which makes it easier to debug issues. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* test/py: skip tests that require large CONFIG_SYS_MAXARGSStephen Warren2016-02-26-0/+8
| | | | | | | | | | | | | | | | | test_hush_if_test.py executes commands that require large values of CONFIG_SYS_MAXARGS. Detect cases where the configured value is too low and skip those tests. Ideally, this would be implemented inside console.run_command(). However, the command passed to that function is already a completely formed string, and determining its argument count usage would require splitting commands at ;, handling quoting to deal with arguments containing spaces, etc. Even passing the command as a list wouldn't solve all these issues, since we'd still need to split commands on ; and deal with cases like "if test ..." which consumes 0 of the argument count. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Simon Glass <sjg@chromium.org>
* test/py: use space to interrupt autobootStephen Warren2016-02-26-1/+1
| | | | | | | | | | | | | | | Sending CTRL-C to QEMU's stdin aborts the process, even if stdin is being used as a serial port (at least in the raspi2 machine with "qemu -serial stdin"). Avoid sending CTRL-C to U-Boot to prevent it exiting. I'd originally used CTRL-C to make sure that if the character used to abort autoboot ended up being treated as part of a command as well, it'd abort command entry and return the prompt to a known state. However, this is not needed, since aborting the autoboot eats the character used to do that. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Simon Glass <sjg@chromium.org>
* test/py: Add option to skip SPL signature checkingMichal Simek2016-02-25-1/+3
| | | | | | | | | | | | | | Provide user option to skip SPL signature verification for cases where u-boot is build with SPL support but full U-Boot is also verified without SPL. If you want to support this feature please add env__spl_skipped = True to your boardenv configuration file. For example Xilinx Zynq is using this feature where the same U-Boot binary is checked with SPL and without SPL(with FSBL). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* test/py: only check for SPL signature if SPL uses serial outputHeiko Schocher2016-02-24-2/+7
| | | | | | | | | check for U-Boot SPL signature only if SPL really has a serial output. So check if CONFIG_SPL_SERIAL_SUPPORT is active in board config. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
generated by cgit v1.1 at 2024-11-15 21:31:14 +0000