summaryrefslogtreecommitdiff
path: root/lib
Commit message (Collapse)AuthorAgeLines
...
| * | mmc: tegra: add basic Tegra186 supportStephen Warren2016-05-31-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra186's MMC controller needs to be explicitly identified. Add another compatible value for it. Tegra186 will use an entirely different clock/reset control mechanism to existing chips, and will use standard clock/reset APIs rather than the existing Tegra-specific custom APIs. The driver support for that isn't ready yet, so simply disable all clock/reset usage if compiling for Tegra186. This must happen at compile time rather than run-time since the custom APIs won't even be compiled in on Tegra186. In the long term, the plan would be to convert the existing custom APIs to standard APIs and get rid of the ifdefs completely. The system's main eMMC will work without any clock/reset support, since the firmware will have already initialized the controller in order to load U-Boot. Hence the driver is useful even in this apparently crippled state. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | lib: Enable private libgcc by defaultMarek Vasut2016-06-02-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch decouples U-Boot binary from the toolchain on systems where private libgcc is available. Instead of pulling in functions provided by the libgcc from the toolchain, U-Boot will use it's own set of libgcc functions. These functions are usually imported from Linux kernel, which also uses it's own libgcc functions instead of the ones provided by the toolchain. This patch solves a rather common problem. The toolchain can usually generate code for many variants of target architecture and often even different endianness. The libgcc on the other hand is usually compiled for one particular configuration and the functions provided by it may or may not be suited for use in U-Boot. This can manifest in two ways, either the U-Boot fails to compile altogether and linker will complain or, in the much worse case, the resulting U-Boot will build, but will misbehave in very subtle and hard to debug ways. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | tiny-printf: Support sprintf()Marek Vasut2016-06-02-2/+14
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | Add a simple version of this function for SPL. It does not check the buffer size as this would add to the code size. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: lesne@alse-fr.com Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Sylvain Lesne <lesne@alse-fr.com> Tested-by: Sylvain Lesne <lesne@alse-fr.com>
* | Merge git://git.denx.de/u-boot-dmTom Rini2016-05-27-28/+81
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For odroid-c2 (arch-meson) for now disable designware eth as meson now needs to do some harder GPIO work. Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: lib/efi_loader/efi_disk.c Modified: configs/odroid-c2_defconfig
| * | dm: efi: Update for CONFIG_BLKSimon Glass2016-05-27-15/+46
| | | | | | | | | | | | | | | | | | | | | | | | This code does not currently build with driver model enabled for block devices. Update it to correct this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexander Graf <agraf@suse.de>
| * | tiny-printf: Support snprintf()Simon Glass2016-05-26-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | Add a simple version of this function for SPL. It does not check the buffer size as this would add to the code size. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
| * | tiny-printf: Tidy up a few nitsSimon Glass2016-05-26-8/+8
| |/ | | | | | | | | | | | | | | | | - Rename 'w' to 'width' to make it more obvious what it is used for - Use bool and int types instead of char to avoid register-masking on 32-bit machines Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
* | efi_loader: gop: Don't expose fb addressAlexander Graf2016-05-27-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently Linux is gaining support for efifb on AArch64 and that support actually tries to make use of the frame buffer address we expose to it via gop. While this wouldn't be bad in theory, in practice it means a few bad things 1) We expose 16bit frame buffers as 32bit today 2) Linux can't deal with overlapping non-PCI regions between efifb and a different frame buffer driver For now, let's just disable exposure of the frame buffer address. Most OSs that get booted will have a native driver for the GPU anyway. Signed-off-by: Alexander Graf <agraf@suse.de> [trini: Remove line_len entirely] Signed-off-by: Tom Rini <trini@konsulko.com>
* | efi_loader: Clean up system table on exitAlexander Graf2016-05-27-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | We put the system table into our runtime services data section so that payloads may still access it after exit_boot_services. However, most fields in it are quite useless once we're in that state, so let's just patch them out. With this patch we don't get spurious warnings when running EFI binaries anymore. Signed-off-by: Alexander Graf <agraf@suse.de>
* | efi_loader: Add bounce buffer supportAlexander Graf2016-05-27-9/+86
| | | | | | | | | | | | | | | | | | | | | | | | Some hardware that is supported by U-Boot can not handle DMA above 32bits. For these systems, we need to come up with a way to expose the disk interface in a safe way. This patch implements EFI specific bounce buffers. For non-EFI cases, this apparently was no issue so far, since we can just define our environment variables conveniently. Signed-off-by: Alexander Graf <agraf@suse.de>
* | efi_loader: Add network access supportAlexander Graf2016-05-27-0/+292
|/ | | | | | | | | | | | | We can now successfully boot EFI applications from disk, but users may want to also run them from a PXE setup. This patch implements rudimentary network support, allowing a payload to send and receive network packets. With this patch, I was able to successfully run grub2 with network access inside of QEMU's -M xlnx-ep108. Signed-off-by: Alexander Graf <agraf@suse.de>
* dm: part: Drop the block_drvr tableSimon Glass2016-05-17-11/+16
| | | | | | | This is not needed since we can use the functions provided by the legacy block device support. Signed-off-by: Simon Glass <sjg@chromium.org>
* Change my mailaddressAndreas Bießmann2016-05-02-1/+1
| | | | | | I'll switch my mails to my own server, so drop all gmail references. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* efi_loader: Handle memory overflowsAndreas Färber2016-04-18-4/+4
| | | | | | | | | | jetson-tk1 has 2 GB of RAM at 0x80000000, causing gd->ram_top to be zero. Handle this by either avoiding ram_top or by using the same type as ram_top to reverse the overflow effect. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alexander Graf <agraf@suse.de>
* gunzip.c: use block layer for writesEric Nelson2016-04-18-3/+2
| | | | | | | | Call blk_dwrite to ensure that the block cache is notified if enabled and remove build breakage when CONFIG_BLK is enabled. Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* efi_loader: Expose ascending efi memory mapAlexander Graf2016-04-18-2/+7
| | | | | | | | | | | | The EFI memory map does not need to be in a strict order, but 32bit grub2 does expect it to be ascending. If it's not, it may try to allocate memory inside the U-Boot data memory region. We already sort the memory map in descending order, so let's just reverse it when we pass it to a payload. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Andreas Färber <afaerber@suse.de>
* efi_loader: Always flush in cache line size granularityAlexander Graf2016-04-18-1/+9
| | | | | | | | | | | | The cache line flush helpers only work properly when they get aligned start and end addresses. Round our flush range to cache line size. It's safe because we're guaranteed to flush within a single page which has the same cache attributes. Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Andreas Färber <afaerber@suse.de>
* efi_loader: Increase path string to 32 charactersAlexander Graf2016-04-18-2/+2
| | | | | | | | | | | | Whenever we want to tell our payload about a path, we limit ourselves to a reasonable amount of characters. So far we only passed in device names - exceeding 16 chars was unlikely there. However by now we also pass real file path information, so let's increase the limit to 32 characters. That way common paths like "boot/efi/bootaa64.efi" fit just fine. Signed-off-by: Alexander Graf <agraf@suse.de>
* efi_loader: Add el torito supportAlexander Graf2016-04-18-0/+35
| | | | | | | | | | When loading an el torito image, uEFI exposes said image as a raw block device to the payload. Let's do the same by creating new block devices with added offsets for the respective el torito partitions. Signed-off-by: Alexander Graf <agraf@suse.de>
* efi_loader: Split drive add into functionAlexander Graf2016-04-18-37/+47
| | | | | | | | The snippet of code to add a drive to our drive list needs to get called from 2 places in the future. Split it into a separate function. Signed-off-by: Alexander Graf <agraf@suse.de>
* lib/crc8: Add crc start valueStefan Roese2016-04-11-13/+20
| | | | | | | | | | | | | | | | | | To make the usage of this function more flexible, lets add the CRC start value as parameter to this function. This way it can be used by other functions requiring different start values than 0 as well. For non-zero CRC start values to work, I've reworked the function a bit. The new implementation is copied from the Linux version in drivers/i2c/i2c-core.c / i2c_smbus_pec(). Which supports non-zero CRC stating values. I've double-checked that the results for zero starting values are identical to the results from the original version of this function. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* efi_loader: Always allocate the highest available addressAlexander Graf2016-04-01-0/+29
| | | | | | | | | | | | Some EFI applications (grub2) expect that an allocation always returns the highest available memory address for the given size. Without this, we may run into situations where the initrd gets allocated at a lower address than the kernel. This patch fixes booting in such situations for me. Signed-off-by: Alexander Graf <agraf@suse.de>
* lib/physmem.c: Switch to __weak for arch_phys_memsetTom Rini2016-04-01-4/+2
| | | | | | | We normally use __weak rather than calling it out directly as an alias. Update this function to the normal method. Signed-off-by: Tom Rini <trini@konsulko.com>
* cosmetic: Fix typos "privide"Masahiro Yamada2016-04-01-1/+1
| | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* efi_loader: Fix some entry/exit pointsAlexander Graf2016-03-27-7/+11
| | | | | | | | | | | | When switching between EFI context and U-Boot context we need to swap the register that "gd" resides in. Some functions slipped through here, with efi_allocate_pool / efi_free_pool not doing the switch correctly and efi_return_handle switching too often. Fix them all up to make sure we always have consistent register state. Signed-off-by: Alexander Graf <agraf@suse.de>
* efi_stub: Move carriage return before line feed in putc()Bin Meng2016-03-27-2/+3
| | | | | | | A carriage return needs to execute before a line feed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* efi_loader: Add GOP supportAlexander Graf2016-03-27-0/+153
| | | | | | | | | | | | The EFI standard defines a simple boot protocol that an EFI payload can use to access video output. This patch adds support to expose exactly that one (and the mode already in use) as possible graphical configuration to an EFI payload. With this, I can successfully run grub2 with graphical output. Signed-off-by: Alexander Graf <agraf@suse.de>
* cmd_dhry.c: Use lldiv for vax_mips calculation as wellTom Rini2016-03-17-1/+1
| | | | | | | | | | Since dhry_per_sec is a u64 we must also use lldiv here when working with it. Otherwise: ../lib/dhry/cmd_dhry.c:(.text.do_dhry+0xd8): undefined reference to `__udivdi3' On some platforms. Signed-off-by: Tom Rini <trini@konsulko.com>
* x86: dts: Drop memory SPD compatible stringSimon Glass2016-03-17-1/+0
| | | | | | | | This is not needed now that the memory controller driver has the SPD data in its own node. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dhry: Correct dhrystone calculation for fast machinesSimon Glass2016-03-17-3/+5
| | | | | | | At present samus reports about 5600 DMIPS. With the default iteration count this is OK, but if 10 million runs are performed it overflows. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Drop all the old pin configuration codeSimon Glass2016-03-17-1/+0
| | | | | | | | We don't need this anymore - we can use device tree and the new pinconfig driver instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* efi_loader: Pass proper device path in on bootAlexander Graf2016-03-15-6/+0
| | | | | | | | | | | | | | | | | EFI payloads can query for the device they were booted from. Because we have a disconnect between loading binaries and running binaries, we passed in a dummy device path so far. Unfortunately that breaks grub2's logic to find its configuration file from the same device it was booted from. This patch adds logic to have the "load" command call into our efi code to set the device path to the one we last loaded a binary from. With this grub2 properly detects where we got booted from and can find its configuration file, even when searching by-partition. Signed-off-by: Alexander Graf <agraf@suse.de>
* efi_loader: hook up in build environmentAlexander Graf2016-03-15-0/+23
| | | | | | | | | | | Now that we have all the bits and pieces ready for EFI payload loading support, hook them up in Makefiles and KConfigs so that we can build. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> [trini: Enable only when we of OF_LIBFDT, disable on kwb and colibri_pxa270] Signed-off-by: Tom Rini <trini@konsulko.com>
* efi_loader: Implement memory allocation and mapAlexander Graf2016-03-15-0/+319
| | | | | | | | | | | | | | | | | | | The EFI loader needs to maintain views of memory - general system memory windows as well as used locations inside those and potential runtime service MMIO windows. To manage all of these, add a few helpers that maintain an internal representation of the map the similar to how the EFI API later on reports it to the application. For allocations, the scheme is very simple. We basically allow allocations to replace chunks of previously done maps, so that a new LOADER_DATA allocation for example can remove a piece of the RAM map. When no specific address is given, we just take the highest possible address in the lowest RAM map that fits the allocation size. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Simon Glass <sjg@chromium.org>
* efi_loader: Add disk interfacesAlexander Graf2016-03-15-0/+218
| | | | | | | | | | | | | | | A EFI applications usually want to access storage devices to load data from. This patch adds support for EFI disk interfaces. It loops through all block storage interfaces known to U-Boot and creates an EFI object for each existing one. EFI applications can then through these objects call U-Boot's read and write functions. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> [trini: Update for various DM changes since posting] Signed-off-by: Tom Rini <trini@konsulko.com>
* efi_loader: Add runtime servicesAlexander Graf2016-03-15-3/+293
| | | | | | | | | | | | | | | | | After booting has finished, EFI allows firmware to still interact with the OS using the "runtime services". These callbacks live in a separate address space, since they are available long after U-Boot has been overwritten by the OS. This patch adds enough framework for arbitrary code inside of U-Boot to become a runtime service with the right section attributes set. For now, we don't make use of it yet though. We could maybe in the future map U-boot environment variables to EFI variables here. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* efi_loader: Add console interfaceAlexander Graf2016-03-15-0/+360
| | | | | | | | | | | | | | One of the basic EFI interfaces is the console interface. Using it an EFI application can interface with the user. This patch implements an EFI console interface using getc() and putc(). Today, we only implement text based consoles. We also convert the EFI Unicode characters to UTF-8 on the fly, hoping that everyone managed to jump on the train by now. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* efi_loader: Add boot time servicesAlexander Graf2016-03-15-0/+781
| | | | | | | | | | | | | | When an EFI application runs, it has access to a few descriptor and callback tables to instruct the EFI compliant firmware to do things for it. The bulk of those interfaces are "boot time services". They handle all object management, and memory allocation. This patch adds support for the boot time services and also exposes a system table, which is the point of entry descriptor table for EFI payloads. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* efi_loader: Add PE image loaderAlexander Graf2016-03-15-0/+188
| | | | | | | | | EFI uses the PE binary format for its application images. Add support to EFI PE binaries as well as all necessary bits for the "EFI image loader" interfaces. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-03-14-6/+7
|\
| * dm: fdtdec: Correct a sandbox build warningSimon Glass2016-03-14-2/+3
| | | | | | | | | | | | | | Adjust the cast to avoid a warning when stdint.h is used. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: Drop the block_dev_desc_t typedefSimon Glass2016-03-14-1/+1
| | | | | | | | | | | | | | | | | | Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: Use uclass_first_device_err() where it is usefulSimon Glass2016-03-14-3/+3
| | | | | | | | | | | | Use this new function in places where it simplifies the code. Signed-off-by: Simon Glass <sjg@chromium.org>
* | lib/crc16.c: Rename cyg_crc16() to crc16_ccitt() and add crc start valueStefan Roese2016-03-14-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The original name of this function is unclear. This patch renames this CRC16 function to crc16_ccitt() matching its name with its implementation. To make the usage of this function more flexible, lets add the CRC start value as parameter to this function. This way it can be used by other functions requiring different start values than 0 as well. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | lib/crc16.c: Coding-style cleanupStefan Roese2016-03-14-41/+40
| | | | | | | | | | | | | | lib/crc16.c is changed to match the common U-Boot coding-style. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | fdt: Allow libfdt to be used in SPLSimon Glass2016-03-14-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | Add an option to enable libfdt in SPL. This can be useful when decoding FIT files in SPL. We need to make sure this option is not enabled in SPL by this change. Also this option needs to be enabled in host builds. Si add a new IMAGE_USE_LIBFDT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Kconfig: Move CONFIG_FIT and related options to KconfigSimon Glass2016-03-14-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
* | Move CONFIG_OF_LIBFDT to KconfigSimon Glass2016-03-14-0/+10
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing boards. Signed-off-by: Simon Glass <sjg@chromium.org>
* | libfdt: Add a function to write a property placeholderSimon Glass2016-03-14-2/+14
|/ | | | | | | | | | | | | The existing function to add a new property to a tree being built requires that the entire contents of the new property be passed in. For some applications it is more convenient to be able to add the property contents later, perhaps by reading from a file. This avoids double-buffering of the contents. Add a new function to support this and adust the existing fdt_property() to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
* timer: Provide an early timerSimon Glass2016-02-26-7/+21
| | | | | | | | | | In some cases the timer must be accessible before driver model is active. Examples include when using CONFIG_TRACE to trace U-Boot's execution before driver model is set up. Enable this option to use an early timer. These functions must be supported by your timer driver: timer_early_get_count() and timer_early_get_rate(). Signed-off-by: Simon Glass <sjg@chromium.org>