summaryrefslogtreecommitdiff
path: root/lib
Commit message (Collapse)AuthorAgeLines
* efi_loader: Pass proper device path in on bootAlexander Graf2016-03-15-6/+0
| | | | | | | | | | | | | | | | | EFI payloads can query for the device they were booted from. Because we have a disconnect between loading binaries and running binaries, we passed in a dummy device path so far. Unfortunately that breaks grub2's logic to find its configuration file from the same device it was booted from. This patch adds logic to have the "load" command call into our efi code to set the device path to the one we last loaded a binary from. With this grub2 properly detects where we got booted from and can find its configuration file, even when searching by-partition. Signed-off-by: Alexander Graf <agraf@suse.de>
* efi_loader: hook up in build environmentAlexander Graf2016-03-15-0/+23
| | | | | | | | | | | Now that we have all the bits and pieces ready for EFI payload loading support, hook them up in Makefiles and KConfigs so that we can build. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> [trini: Enable only when we of OF_LIBFDT, disable on kwb and colibri_pxa270] Signed-off-by: Tom Rini <trini@konsulko.com>
* efi_loader: Implement memory allocation and mapAlexander Graf2016-03-15-0/+319
| | | | | | | | | | | | | | | | | | | The EFI loader needs to maintain views of memory - general system memory windows as well as used locations inside those and potential runtime service MMIO windows. To manage all of these, add a few helpers that maintain an internal representation of the map the similar to how the EFI API later on reports it to the application. For allocations, the scheme is very simple. We basically allow allocations to replace chunks of previously done maps, so that a new LOADER_DATA allocation for example can remove a piece of the RAM map. When no specific address is given, we just take the highest possible address in the lowest RAM map that fits the allocation size. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Simon Glass <sjg@chromium.org>
* efi_loader: Add disk interfacesAlexander Graf2016-03-15-0/+218
| | | | | | | | | | | | | | | A EFI applications usually want to access storage devices to load data from. This patch adds support for EFI disk interfaces. It loops through all block storage interfaces known to U-Boot and creates an EFI object for each existing one. EFI applications can then through these objects call U-Boot's read and write functions. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> [trini: Update for various DM changes since posting] Signed-off-by: Tom Rini <trini@konsulko.com>
* efi_loader: Add runtime servicesAlexander Graf2016-03-15-3/+293
| | | | | | | | | | | | | | | | | After booting has finished, EFI allows firmware to still interact with the OS using the "runtime services". These callbacks live in a separate address space, since they are available long after U-Boot has been overwritten by the OS. This patch adds enough framework for arbitrary code inside of U-Boot to become a runtime service with the right section attributes set. For now, we don't make use of it yet though. We could maybe in the future map U-boot environment variables to EFI variables here. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* efi_loader: Add console interfaceAlexander Graf2016-03-15-0/+360
| | | | | | | | | | | | | | One of the basic EFI interfaces is the console interface. Using it an EFI application can interface with the user. This patch implements an EFI console interface using getc() and putc(). Today, we only implement text based consoles. We also convert the EFI Unicode characters to UTF-8 on the fly, hoping that everyone managed to jump on the train by now. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* efi_loader: Add boot time servicesAlexander Graf2016-03-15-0/+781
| | | | | | | | | | | | | | When an EFI application runs, it has access to a few descriptor and callback tables to instruct the EFI compliant firmware to do things for it. The bulk of those interfaces are "boot time services". They handle all object management, and memory allocation. This patch adds support for the boot time services and also exposes a system table, which is the point of entry descriptor table for EFI payloads. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* efi_loader: Add PE image loaderAlexander Graf2016-03-15-0/+188
| | | | | | | | | EFI uses the PE binary format for its application images. Add support to EFI PE binaries as well as all necessary bits for the "EFI image loader" interfaces. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-03-14-6/+7
|\
| * dm: fdtdec: Correct a sandbox build warningSimon Glass2016-03-14-2/+3
| | | | | | | | | | | | | | Adjust the cast to avoid a warning when stdint.h is used. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: Drop the block_dev_desc_t typedefSimon Glass2016-03-14-1/+1
| | | | | | | | | | | | | | | | | | Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: Use uclass_first_device_err() where it is usefulSimon Glass2016-03-14-3/+3
| | | | | | | | | | | | Use this new function in places where it simplifies the code. Signed-off-by: Simon Glass <sjg@chromium.org>
* | lib/crc16.c: Rename cyg_crc16() to crc16_ccitt() and add crc start valueStefan Roese2016-03-14-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The original name of this function is unclear. This patch renames this CRC16 function to crc16_ccitt() matching its name with its implementation. To make the usage of this function more flexible, lets add the CRC start value as parameter to this function. This way it can be used by other functions requiring different start values than 0 as well. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | lib/crc16.c: Coding-style cleanupStefan Roese2016-03-14-41/+40
| | | | | | | | | | | | | | lib/crc16.c is changed to match the common U-Boot coding-style. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | fdt: Allow libfdt to be used in SPLSimon Glass2016-03-14-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | Add an option to enable libfdt in SPL. This can be useful when decoding FIT files in SPL. We need to make sure this option is not enabled in SPL by this change. Also this option needs to be enabled in host builds. Si add a new IMAGE_USE_LIBFDT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Kconfig: Move CONFIG_FIT and related options to KconfigSimon Glass2016-03-14-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
* | Move CONFIG_OF_LIBFDT to KconfigSimon Glass2016-03-14-0/+10
| | | | | | | | | | | | Move this option to Kconfig and tidy up existing boards. Signed-off-by: Simon Glass <sjg@chromium.org>
* | libfdt: Add a function to write a property placeholderSimon Glass2016-03-14-2/+14
|/ | | | | | | | | | | | | The existing function to add a new property to a tree being built requires that the entire contents of the new property be passed in. For some applications it is more convenient to be able to add the property contents later, perhaps by reading from a file. This avoids double-buffering of the contents. Add a new function to support this and adust the existing fdt_property() to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
* timer: Provide an early timerSimon Glass2016-02-26-7/+21
| | | | | | | | | | In some cases the timer must be accessible before driver model is active. Examples include when using CONFIG_TRACE to trace U-Boot's execution before driver model is set up. Enable this option to use an early timer. These functions must be supported by your timer driver: timer_early_get_count() and timer_early_get_rate(). Signed-off-by: Simon Glass <sjg@chromium.org>
* lib: Don't instrument the div64 functionSimon Glass2016-02-26-1/+2
| | | | | | | | This function can be called from the timer code on instrumented functions. Mark it as 'notrace' so that it doesn't cause infinite recursion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* tegra: nyan-big: Move the LCD driver to driver modelSimon Glass2016-02-16-1/+0
| | | | | | | | | | Adjust the driver to use driver model. The SOR becomes a bridge device. We use the normal simple_panel driver to handle the display itself. We also need to enable some options such as regulators, PWMs and DM_VIDEO itself. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Makefile: remove BUILD_TAG from KBUILD_CFLAGSStephen Warren2016-02-15-0/+1
| | | | | | | | | | | | | | | | | | | | | | | If BUILD_TAG is part of KBUILD_CFLAGS, then any time the value changes, all files get rebuilt. In a continuous integration environment, the value will change every build. This wastes time, assuming that incremental builds would otherwise occur. To solve this, remove BUILD_TAG from KBUILD_CFLAGS and add it to CFLAGS for just the one file that uses it. This does have the disadvantage that if any other files want to use the flag, we'll need to duplicate this custom CFLAGS setup logic. However, it seems unlikely we'll need this. An alternative would be to add BUILD_TAG to the "local version" and remove the special case code from display_options.c. However, that would affect the format of the U-Boot signon message, which may negatively affect people looking for specific data there. The approach of using file-specific CFLAGS was suggested by Masahiro Yamada. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
* gunzip: remove avail_in recalculationStephen Warren2016-02-09-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current, the following passes: ./u-boot -d arch/sandbox/dts/test.dtb -c 'ut_image_decomp' but the following fails: ./u-boot -d arch/sandbox/dts/test.dtb -c 'ut dm; ut_image_decomp' This is because the gunzip code reads input data beyond the end of its input buffer. In the first case above, this data just happens to be 0, which just happens to trigger gzip to signal the error the decompression unit test expects. In the second case above, the "ut dm" test has written data to the accidentally-read memory, which causes the gzip code to take a different path and so return a different value, which triggers the test failure. The cause of gunzip reading past its input buffer is the re-calculation of s.avail_in in zunzip(), since it can underflow. Not only is the formula non-sensical (it uses the delta between two output buffer pointers to calculate available input buffer size), it also appears to be unnecessary, since the gunzip code already maintains this value itself. This patch removes this re-calculation to avoid the underflow and redundant work. The loop exit condition is also adjusted so that if inflate() has consumed the entire input buffer, without indicating returning Z_STREAM_END (i.e. decompression complete without error), an error is raised. There is still opportunity to simplify the code here by splitting up the loop exit condition into separate tests. However, this patch makes the minimum modifications required to solve the problem at hand, in order to keep the Acked-by: Kees Cook <keescook@chromium.org> diff simple. I am not entirely convinced that the loop in zunzip() is necessary at all. It could only be useful if inflate() can return Z_BUF_ERROR (which typically means that it needs more data in the input buffer, or more space in the output buffer), even though Z_FINISH is set /and/ the full input is available in the input buffer /and/ there is enough space to store the decompressed output in the output buffer. The comment in zlib.h after the prototype of inflate() implies this is never the case. However, I assume there must have been some reason for introducing this loop in the first place, as part of commit "Fix gunzip to work for any gziped uImage size". This patch is similar to the earlier b75650d84d4b "gzip: correctly bounds-check output buffer", which corrected a similar issue for s.avail_out. Cc: Catalin Radu <Catalin@VirtualMetrix.com> Cc: Kees Cook <keescook@chromium.org> Fixes: f039ada5c109 ("Fix gunzip to work for any gziped uImage size") Signed-off-by: Stephen Warren <swarren@nvidia.com>
* fdt: introduce fdtdec_get_child_countPeng Fan2016-02-06-0/+11
| | | | | | | | | Introduce fdtdec_get_child_count for get the number of subnodes of one parent node. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* bzlib: Try another way to fix an unused variableSimon Glass2016-02-06-4/+3
| | | | | | | | | Use __maybe_unused which should avoid the Coverity error. Reported-by: Coverity (CID: 134900) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* Use correct spelling of "U-Boot"Bin Meng2016-02-06-4/+4
| | | | | | | | | | Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
* tpm: Fix fault in case CONFIG_DM_TPM is set without any TPMChristophe Ricard2016-01-28-1/+1
| | | | | | | | In case CONFIG_DM_TPM was set without any TPM chipset configured a fault was generated (NULL pointer access). Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
* x86: Drop the irq router compatible stringSimon Glass2016-01-24-1/+0
| | | | | | | We use driver model for this now, so we don't need this string. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: video: sandbox: Convert sandbox to use driver model for videoSimon Glass2016-01-20-1/+0
| | | | | | | | Now that driver model support is available, convert sandbox over to use it. We can remove a few of the special hooks that sandbox currently has. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
* bzip2: Support compression for sandboxSimon Glass2016-01-20-0/+1849
| | | | | | | | | | | Add the missing code to allow bzip2 compression to be used. This is useful for sandbox tests. These files are taken from the bzip2 1.0.6 release. The license text is copied to the top of each file as is done with other bzip2 files in U-Boot. The only other change is to squash a compiler warning with nBytes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* tiny-printf: Always print zeroesSimon Glass2016-01-20-4/+12
| | | | | | | | | At present this does not print zero values in numeric format (hex and decimal). Add a special case for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* tiny-printf: Avoid printing NULL stringsSimon Glass2016-01-20-2/+4
| | | | | | | Add a check for NULL strings to avoid printing junk to the console. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
* dm: timer: uclass: add timer init in uclass driver to add timer deviceMugunthan V N2016-01-20-17/+0
| | | | | | | | | | Adding timer init function in timer-uclass driver to create and initialize the timer device on platforms where u-boot,dm-pre-reloc is not used. Since there will be multiple timer devices in the system, adding a tick-timer node in chosen node to know which timer device to be used as tick timer in u-boot. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* Add more SPDX-License-Identifier tagsTom Rini2016-01-19-38/+3
| | | | | | | | | In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
* gunzip.c: Only include gzwrite on CONFIG_CMD_UNZIPTom Rini2016-01-19-0/+2
| | | | | | | | | Only when we have CONFIG_CMD_UNZIP enabled do we have the 'gzwrite' command. While this command should be separated from CONFIG_CMD_UNZIP we should also only include the write portion of the gz code in that case as well. Signed-off-by: Tom Rini <trini@konsulko.com>
* vsprintf.c: Always enable CONFIG_SYS_VSNPRINTFTom Rini2016-01-19-21/+0
| | | | | | | | | | | | | | Enabling this function always removes some class of string saftey issues. The size change here in general is about 400 bytes and this seems a reasonable trade-off. Cc: Peng Fan <peng.fan@nxp.com> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-01-14-0/+1
|\
| * fdtdec: Add compatible string for Intel IvyBridge FSPBin Meng2016-01-13-0/+1
| | | | | | | | | | | | | | | | Use "intel,ivybridge-fsp" for Intel IvyBridge FSP compatible string. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | block: pass block dev not num to read/write/erase()Stephen Warren2016-01-13-2/+1
| | | | | | | | | | | | | | | | | | | | | | This will allow the implementation to make use of data in the block_dev structure beyond the base device number. This will be useful so that eMMC block devices can encompass the HW partition ID rather than treating this out-of-band. Equally, the existence of the priv field is crying out for this patch to exist. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | dm: serial: Convert ns16550 driver to use driver model PCI APISimon Glass2016-01-12-52/+5
|/ | | | | | | | | | | | | | | | | Use the driver model version of the function to find the BAR. This updates the fdtdec function, of which ns16550 is the only user. The fdtdec_get_pci_bdf() function is dropped for several reasons: - with driver model we should use 'struct udevice *' rather than passing the device tree offset explicitly - there are no other users in the tree - the function parses for information which is already available in the PCI device structure (specifically struct pci_child_platdata which is available at dev_get_parent_platdata(dev) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* arm: socfpga: Allow DWC2 UDC probing from OFMarek Vasut2015-12-20-0/+1
| | | | | | | | | | | | The USB gadget framework does not support DM yet, so add this bit to let DWC2 UDC probe from OF on platforms which support it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Lukasz Majewski <l.majewski@majess.pl> Cc: Lukasz Majewski <l.majewski@samsung.com>
* lib: split out strtoxxxx functions out of vsprintf.cSjoerd Simons2015-12-13-167/+177
| | | | | | | | To allow the various string to number conversion functions to be used when using tiny-printf,split them out into their own file which gets build regardless of what printf implementation is used. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
* lib: Split panic functions out of vsprintf.cSjoerd Simons2015-12-13-32/+48
| | | | | | | | To allow panic and panic_str to still be used when using tiny-printf, split them out into their own file which gets build regardless of what printf implementation is used. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
* lib/tiny-printf.c: Implement vprintfSjoerd Simons2015-12-13-5/+13
| | | | | | | Implement both printf and vprintf for a bit more flexibility, e.g. allows the panic() function to work with tiny-printf. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
* dm: tegra: pci: Convert tegra boards to driver model for PCISimon Glass2015-12-01-4/+0
| | | | | | | | | Adjust the Tegra PCI driver to support driver model and move all boards over at the same time. This can make use of some generic driver model code, such as the range-decoding logic. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: timer: Support 64-bit counterBin Meng2015-12-01-3/+6
| | | | | | | | | | | | There are timers with a 64-bit counter value but current timer uclass driver assumes a 32-bit one. Modify timer_get_count() to ask timer driver to always return a 64-bit counter value, and provide an inline helper function timer_conv_64() to handle the 32-bit/64-bit conversion automatically. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* lib/tiny-printf.c: Support numbers bigger than 0xffff and misc updatesStefan Roese2015-11-23-20/+12
| | | | | | | | | | | | | | | | | | | | | | | With this patch now, the tiny printf() function also supports numbers bigger than 0xffff. Additionally the code is simplified a bit and some static variables are moved to function parameters. Also the upper case hex variable output support is removed, as its not really needed in this simple printf version. And removing it reduces the complexity and the code size again a bit. Here the new numbers, again on the db-mv784mp-gp (Armada XP): Without this patch: 56542 18536 1956 77034 12cea ./spl/u-boot-spl With this patch: 56446 18536 1936 76918 12c76 ./spl/u-boot-spl Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
* lib/tiny-printf.c: Add tiny printf function for space limited environmentsStefan Roese2015-11-23-1/+188
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a small printf() version that supports all basic formats. Its intented to be used in U-Boot SPL versions on platforms with very limited internal RAM sizes. To enable it, just define CONFIG_USE_TINY_PRINTF in your defconfig. This will result in the SPL using this tiny function and the main U-Boot still using the full-blown printf() function. This code was copied from: http://www.sparetimelabs.com/printfrevisited With mostly only coding style related changes so that its checkpatch clean. The size reduction is about 2.5KiB. Here a comparison for the db-mv784mp-gp (Marvell AXP) SPL: Without this patch: 58963 18536 1928 79427 13643 ./spl/u-boot-spl With this patch: 56542 18536 1956 77034 12cea ./spl/u-boot-spl Note: To make it possible to compile tiny-printf.c instead of vsprintf.c when CONFIG_USE_TINY_PRINTF is defined, the functions printf() and vprintf() are moved from common/console.c into vsprintf.c in this patch. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
* Add a circular memory buffer implementationSimon Glass2015-11-19-0/+391
| | | | | | | | This will be used to support console recording. It provides for a circular buffer which can be written at the head and read from the tail. It supports avoiding data copying by providing raw access to the data. Signed-off-by: Simon Glass <sjg@chromium.org>
* Drop config.h header from display_options.cSimon Glass2015-11-19-1/+0
| | | | | | Since common.h will always include this automatically, it is not needed. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-09 15:01:27 +0000