summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* dm: gpio: add a default gpio xlate routineEric Nelson2016-05-17-5/+14
| | | | | | | | | | | | | | | | | Many drivers use a common form of offset + flags for device tree nodes. e.g.: <&gpio1 2 GPIO_ACTIVE_LOW> This patch adds a common implementation of this type of parsing and calls it when a gpio driver doesn't supply its' own xlate routine. This will allow removal of the driver-specific versions in a handful of drivers and simplify the addition of new drivers. Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* drivers: usb: common: add common code for usb drivers to useMugunthan V N2016-05-17-0/+9
| | | | | | | Add common usb code which usb drivers makes use of it. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* dm: spi: introduce dm apiPeng Fan2016-05-17-0/+52
| | | | | | | | | | | Introduce dm_spi_claim_bus, dm_spi_release_bus and dm_spi_xfer Convert spi_claim_bus, spi_release_bus and spi_xfer to use the new API. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org>
* m68k: add DM model serial driverangelo@sysam.it2016-05-17-0/+23
| | | | | | | | Boards can now use DM serial driver, or still legacy mcf uart driver version. Signed-off-by: Angelo Dureghello <angelo@sysam.it> Acked-by: Simon Glass <sjg@chromium.org>
* Fix various typos, scattered over the code.Robert P. J. Day2016-05-05-4/+4
| | | | | | | | | | | | | Spelling corrections for (among other things): * environment * override * variable * ftd (should be "fdt", for flattened device tree) * embedded * FTDI * emulation * controller
* omap4: duovero: Disable EFI bootingAsh Charles2016-05-05-0/+1
| | | | | | | | The DuoVero board fails to compile with EFI enabled as the generated binaries are too large. As this platform doesn't currently need EFI, disable this feature. Signed-off-by: Ash Charles <ashcharles@gmail.com>
* omap4: load files for legacy bootAsh Charles2016-05-05-1/+4
| | | | | | | Be sure to load the zImage and fdtfile prior to actually booting in case we are doing a legacy boot. Signed-off-by: Ash Charles <ashcharles@gmail.com>
* include/configs: Numerous typo fixes: "controler" -> "controller".Robert P. J. Day2016-05-03-82/+82
| | | | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* net: increase maximum frame size to accomediate VLAN packetsStefan Agner2016-05-03-11/+5
| | | | | | | | | | | Ethernet packages with IEEE 802.1Q VLAN support may be up to 1522 bytes long. Increase the default size used to allocate packet storage by 4 bytes. While at it, let git care about history and rewrite the comment to represent the situation today only. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: fix vlan validationStefan Agner2016-05-03-2/+2
| | | | | | | | VLAN identifiers are 12-bit decimal numbers, not IP addresses. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* igep00x0: Use the SRAM available for SPL.Enric Balletbo i Serra2016-05-03-0/+7
| | | | | | | | | | | Move CONFIG_SPL_TEXT_BASE down to 0x40200000 and set CONFIG_SPL_MAX_SIZE to (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE), so that it's clear what the limit is. This will also help some compilers to fit all the code into the allocated space. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOTFabio Estevam2016-05-02-1/+0
| | | | | | | | | | | | | | | | | | mx6ul_evk does not come with a eMMC populated, so we should not define CONFIG_SUPPORT_EMMC_BOOT as it causes SPL to not be able to boot some brands of SD cards, such as SanDisk microSD HC - 8GB: U-Boot SPL 2016.05-rc1-28384-g108f841 (Apr 19 2016 - 11:19:11) Trying to boot from MMC1 spl: mmc block read error SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### When CONFIG_SUPPORT_EMMC_BOOT is defined spl_boot_mode() returns MMCSD_MODE_EMMCBOOT, so remove this option to have a reliable boot via SD card. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* config: am335x_evm: detect BoneGreen using BBG1matwey.kornilov@gmail.com2016-05-02-6/+3
| | | | | | | Since 770e68c0a37fded897d4bdda661614fc81cb33d2 BoneGreen is detected in board_late_init as board_name 'BBG1' Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
* Fix spelling of "occurred".Vagrant Cascadian2016-05-02-9/+9
| | | | | Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* Change my mailaddressAndreas Bießmann2016-05-02-2/+2
| | | | | | I'll switch my mails to my own server, so drop all gmail references. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* Revert "ti_armv7_common.h: Fix U-Boot location on eMMC"Tom Rini2016-05-02-2/+2
| | | | | | | | | We cannot change the long standing hard-coded offset for raw boot mode for everyone to accommodate how Android expects things to be done here. This reverts commit ef5ebe951bec72631cdbc7cef9079e6c684e5d0b. Signed-off-by: Tom Rini <trini@konsulko.com>
* omap3: Reduce logic/overo SPL max image sizeTom Rini2016-04-27-2/+2
| | | | | | | | | | | | While the OMAP3 has 64KiB of SRAM, per the TRM the download area is only from 0x40200000 to 0x4020F000 and exceeding that will cause failure to boot. Further, we need to make sure that we don't run into SRAM_SCRATCH_SPACE_ADDR as once SPL is running we will write values there and would corrupt our running image. Cc: Adam Ford <aford173@gmail.com> Cc: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM64: zynqmp: Cleanup config file after CMD moveMichal Simek2016-04-26-4/+0
| | | | | | | | | The patch: "configs: Re-sync almost all of cmd/Kconfig" (sha1: 78d1e1d0a157c8b48ea19be6170b992745d30f38) doesn't remove empty if-endif. This patch is fixing it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2016-04-26-0/+1
|\
| * exynos: Set CNTFRQAlexander Graf2016-04-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 73a1cb27 moved the check whether we should set the architected timer frequency from CONFIG_SYS_CLK_FREQ to CONFIG_TIMER_CLK_FREQ, but did not update all users of it. The one where I (finally) realized why KVM didn't work is the Arndale board, so this patch adds the respective define to it. Signed-off-by: Alexander Graf <agraf@suse.de> Fixes: 73a1cb27 Reviewed-by: York Sun <york.sun@nxp.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | pico-imx6ul: Update the defconfigTom Rini2016-04-25-8/+0
| | | | | | | | | | | | | | | | | | The defconfig/config.h file were merged but were already out of sync with mainline. This brings them further into line now. Cc: Richard Hu <richard.hu@technexion.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* | mmc: sdhci: add const qualifier to the name of struct sdhci_hostMasahiro Yamada2016-04-25-1/+1
| | | | | | | | | | | | | | This allows to drop annoying (char *) casts when setting the host name of struct sdhci_host. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: hisilicon: hikey: Align memory node with upstream kernelPeter Griffin2016-04-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memory node gets automatically generated by U-Boot in arch_fixup_fdt(), before passing control to the kernel using U-Boots representation of the dram banks. However the upstream kernel uses the memory node to carve-out regions of RAM for various purposes. To make this work without changing arch_fixup_fdt() which will effect many platforms we replicate the upstream memory node layout using the dram banks. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: hisilicon: hikey: Add hikey & hi6220 dts from v4.6-rc3.Peter Griffin2016-04-25-0/+173
| | | | | | | | | | | | | | | | | | Import the upstream kernel dts into U-Boot. Currently only serial is supported, but a lot more DT changes are queued for v4.7. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ti_armv7_common.h: Fix U-Boot location on eMMCSemen Protsenko2016-04-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to common eMMC partition table for Android boot (see PARTS_DEFAULT definition in include/configs/dra7xx_evm.h), "bootloader" partition (where u-boot.img is stored) starts at 256 KiB. Which is equal to 512 sectors (as 1 MMC sector size is 512 bytes). This patch fixes CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR constant so that it points to correct address of "bootloader" partition and SPL is able to read, parse and run u-boot.img correctly. This change was originally done as part of patch [1] in omapzoom u-boot. Without this patch, SPL fails to parse U-Boot header with next error: mkimage signature not found - ih_magic = 4814325a While at it, also fix U-Boot partition size, which is 384 KiB (as stated in include/configs/dra7xx_evm.h). [1] http://omapzoom.org/?p=repo/u-boot.git;a=commit;h=742b82d0c0aa0ed8096c2225a00e9f350212efa9 Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | configs: Re-sync with cmd/KconfigTom Rini2016-04-25-1294/+0
| | | | | | | | | | | | | | Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
* | include/configs: Whitespace fixupTom Rini2016-04-25-675/+0
| | | | | | | | | | | | | | A number of moveconfig.py runs have left a instances of multiple empty lines in a row. Correct this to a single empty line. Signed-off-by: Tom Rini <trini@konsulko.com>
* | configs: Re-sync almost all of cmd/KconfigTom Rini2016-04-25-1500/+0
| | | | | | | | | | | | | | | | This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
* | configs: Re-sync CONFIG_USB_MUSB_HOSTTom Rini2016-04-25-12/+0
| | | | | | | | | | | | | | Now that CONFIG_USB_MUSB_HOST is part of Kconfig, migrate that over to the defconfig files. Signed-off-by: Tom Rini <trini@konsulko.com>
* | configs: Re-sync HUSH optionsTom Rini2016-04-25-405/+1
| | | | | | | | | | | | | | Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-uniphierTom Rini2016-04-25-8/+44
|\ \
| * | ARM: uniphier: speed up loading kernel image from NOR deviceMasahiro Yamada2016-04-24-1/+2
| | | | | | | | | | | | | | | | | | Copy the kernel image double-word-wise rather than byte-wise. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: uniphier: reserve the last 64 byte of SDRAMMasahiro Yamada2016-04-24-0/+2
| | | | | | | | | | | | | | | | | | | | | The last 64 byte of each DDR channel of PH1-LD20 is periodically used as a scratch area for the DDR PHY training. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: uniphier: add PH1-LD20 SoC supportMasahiro Yamada2016-04-24-7/+40
| | | | | | | | | | | | | | | | | | This is the first ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-04-25-0/+143
|\ \ \
| * | | Add initial support for Technexion's PICO-IMX6UL-EMMC boardFabio Estevam2016-04-19-0/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Technexion's PICO-IMX6UL-EMMC board. For information about this board, please visit: http://www.technexion.com/products/pico/pico-som/pico-imx6-emmc Signed-off-by: Richard Hu <richard.hu@technexion.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | board: ge: bx50v3: Use pwm for display backlightAkshay Bhat2016-04-19-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Setup the LCD backlight brightness control pin to use PWM Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: Stefano Babic <sbabic@denx.de>
* | | | dm: core: Add dev_get_addr_ptr() to return a pointer to the reg addressStefan Roese2016-04-25-0/+10
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some platforms (e.g. x86), the return value of dev_get_addr() can't be assigned to a pointer type variable directly. As there might be a difference between the size of fdt_addr_t and the pointer type. On x86 for example, "fdt_addr_t" is 64bit but "void *" only 32bit. So assigning the register base directly in dev_get_addr() results in this compilation warning: warning: cast to pointer from integer of different size This patch introduces the new function dev_get_addr_ptr() that returns a pointer to the 'reg' address that can be used by drivers in this case. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-04-20-327/+17
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: configs/bcm28155_ap_defconfig configs/dra72_evm_defconfig configs/dra74_evm_defconfig configs/ma5d4evk_defconfig Signed-off-by: Tom Rini <trini@konsulko.com>
| * | | usb: gadget Move: CONFIG_G_DNL_* to KconfigSam Protsenko2016-04-20-146/+8
| | | | | | | | | | | | | | | | | | | | | | | | And also reformat defconfigs using "make savedefconfig" rule. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | | usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to KconfigSam Protsenko2016-04-20-9/+1
| | | | | | | | | | | | | | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | | usb: dwc3: Move CONFIG_USB_DWC3_OMAP to KconfigSam Protsenko2016-04-20-3/+1
| | | | | | | | | | | | | | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | | usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to KconfigSam Protsenko2016-04-20-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | | usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to KconfigSam Protsenko2016-04-20-45/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some config headers. This is also probably fixes am335x_baltos board. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | | usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to KconfigSam Protsenko2016-04-20-91/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | | usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to KconfigSam Protsenko2016-04-20-32/+4
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig. Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig). Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* | | bx50v3: Enable CONFIG_OF_LIBFDT in defconfigAkshay Bhat2016-04-18-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | As of commit 69e173eb57d1f4848f070c83456096ba5d2ba1b4, CONFIG_OF_LIBFDT needs to be selected in defconfig instead of board specific header file. Hence enable CONFIG_OF_LIBFDT in defconfig. Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
* | | efi_loader: Fall back to fdtfile naming conventionAlexander Graf2016-04-18-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When there is no $fdtfile variable set, we still have a good chance that on 32bit arm the fdtfile really is just called $soc-$board.dtb. Enable the exports for $soc and $board in our distr defaults and make use of them in the efi boot script. Reported-by: Andreas Faerber <afaerber@suse.de> Reported-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Andreas Färber <afaerber@suse.de>
* | | efi_loader: Pass fdt address directly to bootefi cmdAlexander Graf2016-04-18-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bootefi cmd today fetches its device tree pointer from either the location appointed by "fdt addr" with a fallback to the U-Boot control fdt. This integration is unusual for U-Boot and diverges from the way we usually handle parameters to boot commands. So let's pass the fdt directly into the bootefi command instead and move the control fdt logic into the distro boot script. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
* | | Remove references to CONFIG_CMD_EXT3, no such commandRobert P. J. Day2016-04-18-2/+0
| | | | | | | | | | | | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
generated by cgit v1.1 at 2024-11-09 05:40:57 +0000