summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* imx: mx6sxsabresd: Add MCIMX28LCD display supportYe Li2016-02-02-0/+20
| | | | | | | | The i.MX6SX SABRESD board supports MCIMX28LCD (800x480x24) at LCDIF1 port, enable this display feature by adding relevant BSP codes and configurations. Signed-off-by: Ye Li <ye.li@nxp.com>
* mx6slevk: Remove CONFIG_ETHPRIME optionFabio Estevam2016-02-02-1/+0
| | | | | | | As mx6slevk has only one Ethernet port, we don't need to declare CONFIG_ETHPRIME, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO boardYe Li2016-02-02-0/+212
| | | | | | | Initial version for mx6sx SABREAUTO board support with features: PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander. Signed-off-by: Ye Li <ye.li@nxp.com>
* wandboard: fix variable name so PXE boot worksPeter Robinson2016-02-02-1/+1
| | | | | | | | | All boards that support PXE booting use the pxefile_addr_r variable. Standardise wandboard with this variable as pxe_addr_r isn't used anywhere else so it's a typo. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
* Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-02-02-0/+39
|\
| * board: atmel: sama5d2_xplained: add SPL supportWenyou Yang2016-02-02-0/+39
| | | | | | | | | | | | | | | | The sama5d2 Xplained SPL supports the boot medias: spi flash and SD Card. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-02-02-4/+3
|\ \
| * | arm8: ls2080: Move the core errata defines out of board specific fileAshish kumar2016-02-01-3/+0
| | | | | | | | | | | | | | | | | | | | | Valid for core A57 Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv7: ls102xa: Increase the supported kernel sizeAlison Wang2016-02-01-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Increase the kernel size supported for LS1021A platform. Define CONFIG_SYS_BOOTM_LEN to 64M. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | board: ls2085aqds: Update kernel_size env variablePrabhakar Kushwaha2016-02-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | kernel_size env variable is defined as 0x28000000, it is beyond NOR flash range. Update kernel_size with 40MB kernel size. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | socfpga: Simplify Makefile filenamesSimon Glass2016-02-01-1/+1
| | | | | | | | | | | | | | | | | | | | | We don't need the -dtb suffix anymore, so drop it. Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* | | mmc: add missing prototype for mmc_get_env_devClemens Gruber2016-02-01-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a follow-up patch to e92029c0f4 and adds a prototype for the weak mmc_get_env_dev function. Cc: Tom Rini <trini@konsulko.com> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2016-02-01-0/+197
|\ \ \
| * | | board: Enable ethernet, tftpboot support to pic32mzdask board.Purna Chandra Mandal2016-02-01-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds ethernet, TFTP support for PIC32MZ[DA] Starter Kit. Also custom environment variables/scripts are added to help boot from network. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
| * | | board: add SDHCI support for PIC32MZDASK board.Purna Chandra Mandal2016-02-01-2/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable MMC, SDHCI, FAT_FS support for PIC32MZ[DA] StarterKit. Also add custom scripts, rules to boot Linux from microSD card. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
| * | | board: Add Microchip PIC32MZ[DA]-Starter-Kit board.Purna Chandra Mandal2016-02-01-0/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for Microchip PIC32MZ[DA] StarterKit board based on a PIC32MZ[DA] family of microcontroller. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | | drivers: clk: Add clock driver for Microchip PIC32 Microcontroller.Purna Chandra Mandal2016-02-01-0/+29
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | PIC32 clock module consists of multiple oscillators, PLLs, mutiplexers and dividers capable of supplying clock to various controllers on or off-chip. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | | arm: novena: Fix EEPROM i2c configurationMarek Vasut2016-01-31-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Novena, the DRAM SPD is connected to i2c1 while the Utility EEPROM is connected to i2c3. Now that the EEPROM handling in U-Boot is fixed, also fix this bit on Novena. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Sean Cross <xobs@kosagi.com> Cc: Stefano Babic <sbabic@denx.de>
* | | armv7: add cacheline sizes where missingAlbert ARIBAUD2016-01-31-0/+46
|/ / | | | | | | | | | | | | | | | | | | Some armv7 targets are missing a cache line size declaration. In preparation for "arm: cache: Implement cache range check for v7" patch, add these declarations with the appropriate value for the target's SoC or CPU. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reviewed-by: Tom Rini <trini@konsulko.com>
* | video: Correct 'tor' typo in commentSimon Glass2016-01-30-1/+1
| | | | | | | | | | | | This should be 'rot', not 'tor'. Signed-off-by: Simon Glass <sjg@chromium.org>
* | video: sandbox: Allow selection of font size and console nameSimon Glass2016-01-30-0/+2
| | | | | | | | | | | | | | | | For testing it is useful to be able to select the font size and the console driver for sandbox. Add this information to platform data and copy it to the video device when needed. Signed-off-by: Simon Glass <sjg@chromium.org>
* | video: Allow selection of the driver and font sizeSimon Glass2016-01-30-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Provide a way for the video console driver to be selected. This is controlled by the video driver's private data. This can be set up when the driver is probed so that it is ready for the video_post_probe() method. The font size is provided as well. The console driver may or may not support this depending on its capability. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | video: Provide a backspace methodSimon Glass2016-01-30-0/+14
| | | | | | | | | | | | | | | | With proportional fonts the vidconsole uclass cannot itself erase the previous character. Provide an optional method so that the driver can handle this operation. Signed-off-by: Simon Glass <sjg@chromium.org>
* | video: Provide a signal when a new console line is startedSimon Glass2016-01-30-0/+14
| | | | | | | | | | | | | | When we start a new line (due to the user pressing return), signal this to the driver so that it can flush its buffer of character positions. Signed-off-by: Simon Glass <sjg@chromium.org>
* | video: Provide a left margin for the text consoleSimon Glass2016-01-30-0/+2
| | | | | | | | | | | | | | Allow the left margin to be set so that text does not have to be right up against the left side. On some panels this makes it hard to read. Signed-off-by: Simon Glass <sjg@chromium.org>
* | video: Use fractional units for X coordinatesSimon Glass2016-01-30-9/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With anti-aliased fonts we need a more fine-grained horizontal position than a single pixel. Characters can be positioned to start part-way through a pixel, with anti-aliasing (greyscale edges) taking care of the visual effect. To cope with this, use fractional units (1/256 pixel) for horizontal positions in the text console. Signed-off-by: Simon Glass <sjg@chromium.org> [agust: rebased] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Merge git://git.denx.de/u-boot-dmTom Rini2016-01-29-18/+18
|\ \
| * | distro bootcmd: enumerate PCI before network operationsStephen Warren2016-01-28-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI bus must be enumerated before PCI devices, such as Ethernet devices, are known to U-Boot. Enhance the distro boot commands to perform PCI enumeration when needed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | distro bootcmd: make net boot only optionally start USBStephen Warren2016-01-28-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the distro boot commands always enumerate USB devices before performing network operations. However, depending on the board and end- user configuration, network devices may not be attached to USB, and so enumerating USB may not be necessary. Enhance the scripts to make this step optional, so that the user can decrease boot time if they don't need USB. This change is performed by moving the "usb start" invocation into a standalone variable. If the user desires, they can replace that variable's value with some no-op command such as "true" instead. Booting from a USB storage device always needs to enumerate USB devices, so this action is still hard-coded. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | dm: Remove device_probe_child()Simon Glass2016-01-28-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This function is not used as the use case for it did not eventuate. Remove it to avoid confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-01-28-40/+93
|\ \ \ | |/ / |/| |
| * | net: phy: introduce a quirk PHY_FLAG_BROKEN_RESETShaohui Xie2016-01-28-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current driver always performs a phy soft reset when connecting the phy device, but soft reset is not always supported by a phy device, so introduce a quirk PHY_FLAG_BROKEN_RESET to let such a phy device to skip soft reset. This commit uses 'flags' of phy device structure to store the quirk. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | include/net.h: add max_speed member in struct eth_pdataAlexey Brodkin2016-01-28-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will be used for getting max speed mode of Ethernet interface that a particular MAC supports from Device Tree blob and later being used for phy configuration. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers/net/phy: introduce phy_set_supported()Alexey Brodkin2016-01-28-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new function will allow MAC drivers to override supported capabilities of the phy. It is required when MAC cannot handle all speeds supported by phy. For example phy supports up-to 1Gb connections while MAC may only work in modes up to 100 or even 10 Mbit/sec. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: breakdown PHY_*_FEATURES definesFlorian Fainelli2016-01-28-7/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Breakdown the PHY_*_FEATURES into per speed defines such that we can easily re-use them individually. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Use priv->tbiaddr to initialize TBI PHY addressBin Meng2016-01-28-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new member 'tbiaddr' to tsec_private struct. For non-DM driver, it is initialized as CONFIG_SYS_TBIPA_VALUE, but for DM driver, we can get this from device tree. Update the bindings doc as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Add driver model ethernet supportBin Meng2016-01-28-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | This adds driver model support to Freescale TSEC ethernet driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Use tsec_private pointer as the parameter for internal routinesBin Meng2016-01-28-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | For internal routines like redundant_init(), startup_tsec() and init_phy(), change to use tsec_private pointer as the parameter. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Move rxbd and txbd to struct tsec_privateBin Meng2016-01-28-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | rxbd and txbd are declared static with 8 byte alignment requirement, but they can be put into struct tsec_private as well and are natually aligned to 8 byte. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Move rx_idx and tx_idx to struct tsec_privateBin Meng2016-01-28-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | At present rx_idx and tx_idx are declared as static variables in the driver codes. To support multiple interfaces, move it to struct tsec_private. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: fsl_mdio: Fix several cosmetic issuesBin Meng2016-01-28-32/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up the tsec and fsl_mdio driver codes a little bit, by: - Fix misuse of tab and space here and there - Use correct multi-line comment format - Replace license identifier to GPL-2.0+ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers: net: vsc9953: Add LAG supportCodrin Ciubotariu2016-01-28-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | You can now configure LAG on VSC9953's ports using the command: ethsw [port <port_no>] aggr {[help] | show | <lag_group_no>} A port must belong to a single LAG. By default, a port belongs to a LAG equal to the port's number. For each frame, a hash will be calculated based on Source/Destination MAC addresses, Source/Destination IP(v4/v6) addresses, Source/Destination ports. This hash will be used to select a single egress port from LAG. This also assures that frames from the same flow will always have the same egress port. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers: net: vsc9953: Fix FDB aging timeCodrin Ciubotariu2016-01-28-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | By default, the aging period is set to 0, so the dynamic FDB entries are never removed. This patch sets the aging time to 300 seconds. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers: net: vsc9953: Fix number of reserved registersCodrin Ciubotariu2016-01-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | There are only 21 registers reserved between ana_ana and ana_pgid register groups. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-01-28-0/+36
|\ \ \
| * | | misc: Add simple driver to enable the legacy UART on Winbond Super IO chipsStefan Roese2016-01-28-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On most x86 boards, the legacy serial ports (io address 0x3f8/0x2f8) are provided by a superio chip connected to the LPC bus. We must program the superio chip so that serial ports are available for us. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | | x86: x86-common.h: Add generic FS commandsStefan Roese2016-01-28-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the generic FS commands (ls, load) to all x86 boards. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Miao Yan <yanmiaobest@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-01-27-279/+612
|\ \ \ \
| * | | | armv8/ls1043aqds: add QSPI boot supportQianyu Gong2016-01-27-6/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the U-Boot Driver Model(DM) to use the Freescale QSPI driver. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | | armv8/ls1043aqds: add QSPI support in SD bootGong Qianyu2016-01-27-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QSPI and IFC are pin-multiplexed on LS1043A. So we use ls1043aqds_sdcard_ifc_defconfig to support IFC in SD boot and ls1043aqds_sdcard_qspi_defconfig to support QSPI in SD boot. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>