summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* powerpc: o2dnt: convert to generic boardAnatolij Gustschin2014-11-07-0/+2
| | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Merge git://git.denx.de/u-boot-tiTom Rini2014-11-07-50/+381
|\
| * omap3: cm-t3517: add LCD/DVI and splash supportIgor Grinberg2014-11-06-0/+15
| | | | | | | | | | | | | | Add support for splash screen on both DVI and SCF0403 LCD. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t3517: add Ethernet supportIgor Grinberg2014-11-06-0/+11
| | | | | | | | | | | | | | Add both EMAC and SMC911x support. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t3517: add USB supportIgor Grinberg2014-11-06-0/+17
| | | | | | | | | | | | | | | | | | Add both host and mUSB support. Currently, the selection between host USB and mUSB is done through the config file. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t3517: add basic board supportIgor Grinberg2014-11-06-0/+277
| | | | | | | | | | | | | | | | | | | | | | CompuLab cm-t3517 is Computer on Module (CoM) based on AM3517 SoC. Features: up to 256MB DDR2, up to 512MB NAND, USB hub, mUSB, WiFi, BT, Analog audio codec, touch screen controller, LED. Add basic support including: LED, Serial console, NAND, MMC, GPIO, I2C, 256MB DRAM. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| * ks2_evm: config: enable fatload commandKhoronzhuk, Ivan2014-11-06-0/+2
| | | | | | | | | | | | | | | | | | The keystone2 evm can boot from USB partition with FAT32 FS, so enable generic load command and fatload command usage. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * keystone2: config: align names of images with MCSDKKhoronzhuk, Ivan2014-11-06-8/+10
| | | | | | | | | | | | | | | | | | | | The Multicore Software Development Kit (MCSDK) provides foundational software for TI KeyStone II device platforms. It's supposed to be used with uboot, and it's convenient to have the same names for images, so correct environment image names according to the last MCSDK3. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * keystone2: config: restructure handling of default env settingsMurali Karicheri2014-11-06-30/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently to customize env for various ks2 boards, individual variables such as NAME_FS etc are defined and included in the common config.h to define CONFIG_EXTRA_ENV_SETTINGS. This doesn't scale well if a variable is not applicable on a specific board. Using this scheme, we have to define variables with empty value and it's ugly. Instead, to allow board specific customization of default env variable, define a common CONFIG_EXTRA_ENV_KS2_SETTINGS for all common variables and define board specific variables in individual board specific config.h using CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS. Use the common and board specific variables to define CONFIG_EXTRA_ENV_SETTINGS. This way more variables can be added in future for individual boards without affecting the other config.h files. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * keystone2: change default boot mode to ubiMurali Karicheri2014-11-06-1/+1
| | | | | | | | | | | | | | | | | | To allow out of box demo, change default boot mode to ubi boot now that NAND is functional in latest EVMs. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * ks2_evm: configs: fix UBI volume nameKhoronzhuk, Ivan2014-11-06-1/+1
| | | | | | | | | | | | | | The UBI volume name has to be prefixed with "ubi:". Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * ARM: TI: omap3: remove raw initrd support in omap3_igep00x0 config file ↵Guillaume GARDET2014-11-06-2/+0
| | | | | | | | | | | | | | | | since it is now in ti_armv7_common.h Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * ARM: TI: Enable raw initrd supportGuillaume GARDET2014-11-06-0/+1
| | | | | | | | | | | | Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * board: k2l_evm: add network supportHao Zhang2014-11-05-6/+8
| | | | | | | | | | | | | | | | | | This patch adds network support code and enables keystone_net driver usage for k2l_evm evaluation board. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_serdes: add keystone K2L SoC supportKhoronzhuk, Ivan2014-11-05-6/+3
| | | | | | | | | | | | | | | | | | Keystone2 Lamar SoC uses the same keystone SerDes driver. All Keystone2 EVM boards currently use SerDes driver, so move CONFIG_TI_KEYSTONE_SERDES to common configuration file. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * Enable Android Fastboot support on am335x_evm boardDileep Katta2014-11-05-2/+14
| | | | | | | | | | | | Signed-off-by: Dileep Katta <dileep.katta@linaro.org> [trini: Rework so that am335x_evm_usbspl still builds] Signed-off-by: Tom Rini <trini@ti.com>
| * twl4030: More voltages on VAUX2 and VAUX3Paul Kocialkowski2014-11-05-0/+2
| | | | | | | | Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* | Merge branch 'rmobile' of git://www.denx.de/git/u-boot-shTom Rini2014-11-05-4/+43
|\ \
| * | arm: rmobile: alt: Add VFAT filesystem supportNobuhiro Iwamatsu2014-11-04-0/+6
| | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: alt: Add support USB and USB commandsNobuhiro Iwamatsu2014-11-04-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | This adds support for USB commands and USB storage device. Signed-off-by: Yoshiyuki Ito <yoshiyuki.ito.ub@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: alt: Add external RAM bootNobuhiro Iwamatsu2014-11-04-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM. The default boot address is 0x70000000. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: koelsch: Add external RAM bootNobuhiro Iwamatsu2014-11-04-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM. The default boot address is 0x70000000. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: lager: Add external RAM bootNobuhiro Iwamatsu2014-11-04-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM. The default boot address is 0xB0000000. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-11-05-6/+335
|\ \ \ | |_|/ |/| |
| * | arm, imx, spi: detect spi flash again on aristainetos boardHeiko Schocher2014-11-03-1/+1
| | | | | | | | | | | | | | | | | | | | | 155fa9af95a "spi: mxc: fix sf probe when using mxc_spi" break spi flash detection on the aristainetos board. Fix this. Signed-off-by: Heiko Schocher <hs@denx.de>
| * | imx: mx6 sabreauto: Add board support for USB EHCIYe.Li2014-11-03-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On mx6 sabreauto board, there are two USB ports: 0: OTG 1: HOST The EHCI driver is enabled for this board, but the IOMUX and VBUS power control is not implemented, which cause both USB port failed to work. This patch fix the problem by adding the board support codes. Since the power control uses the GPIO pin from port expander MAX7310, the PCA953X driver is enabled for accessing the MAX7310. The ID pin of OTG Port needs to configure the GPR1 bit 13 for selecting its daisy chain. Add a new function "imx_iomux_set_gpr_register" to handle GPR register setting. Signed-off-by: Ye.Li <B37916@freescale.com>
| * | imx: mx6slevk: Add support for USDHC1 and USDHC3 slotsYe.Li2014-11-03-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | There are three SD/MMC sockets on mx6slevk boards. Implements the full support for them. The default boot socket is USDHC2, so the MMC environment is set to that device. Signed-off-by: Ye.Li <B37916@freescale.com>
| * | imx: mx6: Enable high frequency clock source for GPTYe.Li2014-11-03-0/+1
| | | | | | | | | | | | | | | | | | | | | Set the CONFIG_MXC_GPT_HCLK configuration in mx6_common.h, so that 24Mhz OSC clock source will be selected for GPT on all MX6 platforms. Signed-off-by: Ye.Li <B37916@freescale.com>
| * | arm: mxs: Define bootscript env variable on m28evkMarek Vasut2014-10-30-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch below failed to define the variable, so define it to make it consistent with M53EVK. commit a428ac914b2b6db851c1feac98622f2d9844db45 Author: Lothar Rubusch <lothar@denx.de> Date: Thu Jun 26 11:01:29 2014 +0200 ARM: m28evk: Update default environment Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * | tqma6: fix sf detectionMarkus Niebel2014-10-30-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 155fa9af95ac5be857a7327e7a968a296e60d4c8 changed the way to define a GPIO line, which can be used to force CS high across multiple transactions. In order to fix sf detection change board code to make use of board_spi_cs_gpio(..). Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | ARM: mx6: Add support for Kosagi NovenaMarek Vasut2014-10-30-1/+299
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Kosagi Novena board. Currently supported are: - I2C busses - FEC Ethernet - MMC0, MMC1, Booting from MMC - SATA - USB ports - USB Ethernet Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Sean Cross <xobs@kosagi.com> Cc: Nikolay Dimitrov <picmaster@mail.bg> Reviewed-by: Nikolay Dimitrov <picmaster@mail.bg>
| * | board: wandboard: add usb storageJeroen Hofstee2014-10-30-0/+9
| | | | | | | | | | | | | | | | | | Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* | | dm: sunxi: Add support for serial using driver modelSimon Glass2014-11-05-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a driver for the designware serial UART used on sunxi. This just redirects to the normal ns16550 driver. Add a stdout-path to the device tree so that the correct UART is chosen. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | dm: sunxi: Modify the GPIO driver to support driver modelSimon Glass2014-11-05-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds driver model support to the sunxi GPIO driver, using the device tree to trigger binding of the driver. The driver will still operate without driver model too. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | dm: sunxi: Add a new config for an FDT-based pcDuino3Simon Glass2014-11-05-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | For now we won't want to mess with the existing configurations. Create a new one which will enable device tree and driver model. Note that this brings the device tree binary into u-boot-sunxi-with-spl.bin. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | dm: sunxi: dts: Add sun7i device tree filesSimon Glass2014-11-05-0/+525
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These are from Linux 3.17-rc7 (commit fe82dcec). U-Boot only uses a small portion of these, but we may as well have something to look forward to. The total compiled size is about 25KB. Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | sunxi: Use CONFIG_MACH_SUN?I from Kconfig instead of CONFIG_SUN?IIan Campbell2014-11-05-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mostly automatic with: sed -i -e 's/CONFIG_\(SUN[45678]I\)/CONFIG_MACH_\1/g' $(git grep -l CONFIG_SUN[45678]I) followed by removing the relevant #defines from include/configs/sun?i.h by hand. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | serial: add prototypes for init functionsJeroen Hofstee2014-11-04-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | While at it, sort them. Cc: Tom Rini <trini@ti.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* | | Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini2014-11-04-174/+2
|\ \ \
| * | | Remove unused filesMasahiro Yamada2014-10-31-174/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [1] arch/arm/include/asm/arch-at91/at91_shdwn.h The top9000 was the last board to use this header file. It was removed by commit d58a9451e733 (ppc/arm: zap EMK boards). [2] board/matrix_vision/common/* Some Matrix Vision boards were dropped by commit e7a565638a7a (powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7) and commit af55e35d3389 (powerpc: mpc5xxx: remove board support for MVBC_P and MVSMR). Since then these files have been unused. [3] include/usb/omap1510_udc.h The omap5912osk was the last board to use this header file. It was removed by commit 62d636aa2ac2 (omap: remove omap5912osk board support). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-By: Wolfgang Denk <wd@denx.de>
| * | | twl4030: VMMC2 3.2V enable on MMC initPaul Kocialkowski2014-10-31-0/+2
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | This enables the VMMC2 LDO, which powers the MMC2 device. When the device starts from MMC2, this has already been enabled by the BootROM, but when starting from peripheral boot (USB, UART), it is not the case. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | | usb: Make pollable int support available outside of ehci-hcd.cHans de Goede2014-11-04-0/+9
| | | | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2014-11-03-2/+0
|\ \ \
| * | | MIPS: kconfig: add options for endianess selectDaniel Schwierzeck2014-11-01-2/+0
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | Add new Kconfig option to let the user select the targets endianess. Each target have to select SUPPORTS_BIG_ENDIAN and/or SUPPORTS_LITTLE_ENDIAN to indicate which endianess is supported. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | | Merge git://git.denx.de/u-boot-x86Tom Rini2014-10-29-1/+4
|\ \ \
| * | | x86: config: Increase CONFIG_SYS_BOOTM_LEN to 16MBSimon Glass2014-10-29-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The code density of x86_64 is not wonderful. Increase the maximum boot size and adjust the load address to cope. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | x86: image: Add new image type for x64_64Simon Glass2014-10-28-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a bit odd in that we are permitted to boot images for either, even though they are separate architectures. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | x86: Display basic CPU information on bootSimon Glass2014-10-28-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Display the type of CPU (x86 or x86_64) when starting up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxTom Rini2014-10-29-13/+39
|\ \ \ \ | |_|/ / |/| | |
| * | | powerpc: TQM5200: convert to generic boardWolfgang Denk2014-10-29-1/+3
| | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit v1.1 at 2024-11-05 05:47:32 +0000