summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
...
| * | | lpc32xx: add support for board work_92105Albert ARIBAUD \(3ADEV\)2015-04-10-0/+241
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Work_92105 from Work Microwave is an LPC3250- based board with the following features: - 64MB or 128MB SDR DRAM - 1 GB SLC NAND, managed through MLC controller. - Ethernet - Ethernet + PHY SMSC8710 - I2C: - EEPROM (24M01-compatible) - RTC (DS1374-compatible) - Temperature sensor (DS620) - DACs (2 x MAX518) - SPI (through SSP interface) - Port expander MAX6957 - LCD display (HD44780-compatible), controlled through the port expander and DACs This board has SPL support, and uses the LPC32XX boot image format. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | | lpc32xx: add lpc32xx-spl.bin boot image targetAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+1
| | | | | | | | | | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | | dtt: add ds620 supportAlbert ARIBAUD \(3ADEV\)2015-04-10-7/+8
| | | | | | | | | | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | | lpc32xx: add Ethernet supportAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+1
| |/ / | | | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | | omap3: pandora: use common configurationGrazvydas Ignotas2015-04-09-141/+36
| | | | | | | | | | | | | | | | | | | | | This allows to clean up the config a good deal and also converts pandora to Generic Board. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
* | | mcx: update maintainer and convert to generic boardAnatolij Gustschin2015-04-09-0/+2
|/ / | | | | | | | | | | | | | | Remove obsolete email address from MAINTAINERS. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tom Rini <trini@konsulko.com>
* | config: exynos: trats2: Enable support for Image.itb at trats2 deviceŁukasz Majewski2015-04-06-2/+6
| | | | | | | | | | | | | | | | After this change it is possible to boot trats2 device with Image.itb, which facilitates automated testing, since only one file is necessary. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | config: exynos: trats: Enable support for Image.itb at trats deviceŁukasz Majewski2015-04-06-2/+6
| | | | | | | | | | | | | | | | After this change it is possible to boot trats device with Image.itb, which facilitates automated testing, since only one file is necessary. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | config: exynos: common: Provide env variables to support Image.itbŁukasz Majewski2015-04-06-0/+54
| | | | | | | | | | | | | | | | | | | | This change allows using Image.itb image format with Exynos4 devices (especially trats and trats2). Such change facilitates automated testing since only one binary needs to be prepared. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | config: peach: Correct memory layout environment settingsSjoerd Simons2015-04-06-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The peach boards have their SDRAM start address at 0x20000000 instead of 0x40000000 which seems common for all other exynos5 based boards. This means the layout set in exynos5-common.h causes the kernel be loaded more then 128MB (at 0x42000000) away from memory start which breaks booting kernels with CONFIG_AUTO_ZRELADDR Define a custom MEM_LAYOUT_ENV_SETTINGS for both peach boards which uses the same offsets from start of memory as the common exynos5 settings. This fixes booting via bootz and PXE Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | exynos5: add trace feature #ifdef in exynos5-common.hInha Song2015-04-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | We can enable / disable trace feature from the FTRACE config options. To enable, compile U-Boot with FTRACE=1. This patch add #ifdef FTRACE in exynos5-common.h for enable/disable to use FTRACE configs instead of having to change board config files. Signed-off-by: Inha Song <ideal.song@samsung.com> Acked-by: Simon Glass <sjg@chroimum.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge git://git.denx.de/u-boot-arcTom Rini2015-04-03-5/+1
|\ \
| * | board: Switch Abilis TB-100 board to Driver Model for serial portAlexey Brodkin2015-04-03-5/+1
| | | | | | | | | | | | | | | Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org>
* | | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-04-03-11/+42
|\ \ \ | |/ / |/| | | | | | | | | | | | | | Conflicts: board/armltd/vexpress64/vexpress64.c Signed-off-by: Tom Rini <trini@konsulko.com>
| * | ARM: tegra: update colibri_t20 configurationMarcel Ziswiler2015-03-30-4/+27
| | | | | | | | | | | | | | | | | | | | | Bring the Colibri T20 configuration in-line with Apalis/Colibri T30. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | ARM: tegra: rename colibri_t20 board/configuration/device-treeMarcel Ziswiler2015-03-30-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In accordance with our other modules supported by U-Boot and as agreed upon for Apalis/Colibri T30 get rid of the carrier board in the board/ configuration/device-tree naming. While at it also bring the prompt more in line with our other products. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: seaboard: Remove unused CONFIG_UART_DISABLE_GPIOSimon Glass2015-03-30-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This CONFIG is not used, so drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | ARMv8: enable DM in vexpress64 boardDavid Feng2015-03-27-1/+12
| | | | | | | | | | | | Signed-off-by: David Feng <fenghua@phytium.com.cn>
* | | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-03-31-304/+287
|\ \ \
| * | | ARM: at91: sama5: move the common part of configurations to at91-sama5_common.hWu, Josh2015-04-01-298/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a new configuration file: at91-sama5_common.h. Which includes the configurations that reused by all SAMA5 chips. at91-sama5_common.h includes: - hw macros (clock, text_base and etc.) - default commands. - BOOTARGS - U-Boot common configs. NOTE: NOR flash definition should be put before including the common header. For sama5d3-xplained: - add CMD_SETEXPR For sama5d3xek: - add CMD_SETEXPR - change CONFIG_SYS_MALLOC_LEN to (4*1024*1024) Signed-off-by: Josh Wu <josh.wu@atmel.com>
| * | | ARM: atmel: at91sam9n12ek: enable spl supportBo Shen2015-04-01-1/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SPL support for at91sam9n12ek boards, now it supports boot up from NAND flash, serial flash. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * | | ARM: atmel: at91sam9x5ek: enable spl supportBo Shen2015-04-01-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SPL support for at91sam9x5ek board. Now, it supports boot up from NAND flash and SPI flash. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * | | ARM: atmel: at91sam9m10g45ek: enable spl supportBo Shen2015-04-01-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supports boot up from NAND flash with software ECC eanbled. And supports boot up from SD/MMC card with FAT file system. As the boot from SD/MMC card with FAT file system, the BSS segment is too big to fit into SRAM, so, use the lds to put it into SDRAM. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * | | ARM: at91: at91sam9n12ek: save the environment to a fat file in MMC cardWu, Josh2015-04-01-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Insteading in mmc's raw sectors, this patch will save the environment in a fat file (uboot.env) in mmc card's first FAT patition by default. If you want to save in mmc's raw sectors, you only need to define CONFIG_ENV_IS_IN_MMC. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com>
| * | | arm, at91: corvus: move MACH_TYPE to defconfigHeiko Schocher2015-04-01-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | move MACH_TYPE into defconfig Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | Merge git://git.denx.de/u-boot-nand-flashTom Rini2015-03-31-69/+5
|\ \ \ \
| * | | | nand: yaffs: Remove the "nand write.yaffs" commandPeter Tyser2015-03-30-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This command is only enabled by one board, complicates the NAND code, and doesn't appear to have been functioning properly for several years. If there are no bad blocks in the NAND region being written nand_write_skip_bad() will take the shortcut of calling nand_write() which bypasses the special yaffs handling. This causes invalid YAFFS data to be written. See http://lists.denx.de/pipermail/u-boot/2011-September/102830.html for an example and a potential workaround. U-Boot still retains the ability to mount and access YAFFS partitions via CONFIG_YAFFS2. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
| * | | | nand: Remove CONFIG_MTD_NAND_VERIFY_WRITEPeter Tyser2015-03-30-36/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CONFIG_MTD_NAND_VERIFY_WRITE has been removed from Linux for some time and a more generic method of NAND verification now exists in U-Boot. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
| * | | | nand: Add verification functionsPeter Tyser2015-03-30-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add nand_verify() and nand_verify_page_oob(). nand_verify() verifies NAND contents against an arbitrarily sized buffer using ECC while nand_verify_page_oob() verifies a NAND page's contents and OOB. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
| * | | | nand: Remove unused read/write structuresPeter Tyser2015-03-30-26/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The use of the nand_write_options and nand_read_options structures were removed in commit dfbf617ff055e4216f78d358b0867c548916d14b. Remove the now-unused structures too. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
| * | | | nand: Remove unused CONFIG_MTD_NAND_ECC_JFFS2 optionPeter Tyser2015-03-30-1/+0
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | This option was removed along with legacy NAND support in be33b046b549ad88c204c209508cd7657232ffbd. Clean up some remnants. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini2015-03-31-0/+173
|\ \ \ \ | | |_|/ | |/| |
| * | | imx:mx6slevk support reading temperaturePeng Fan2015-03-23-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | This patch is to support reading temperature for mx6slevk board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * | | board/seco: Add mx6q-uq7 basic board supportBoris BREZILLON2015-03-23-0/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic SECO MX6Q/uQ7 board support (Ethernet, UART, SD are supported). It also adds a Kconfig skeleton to later add more SECO board (supporting SoC and board variants). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* | | | qspi: dra7x: enable quad mode read for ti-qspi driverRavi Babu2015-03-30-0/+1
| |/ / |/| | | | | | | | | | | | | | | | | | | | This patch enables QUAD read mode for qspi to improve the read performace while loading the binaries from qspi. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* | | sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clockIain Paton2015-03-29-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | make the CPU clock selectable via Kconfig this removes the sunxi specific CONFIG_CLK_FULL_SPEED defined in each soc header and replaces it's use in board/sunxi/board.c with CONFIG_SYS_CLK_FREQ from Kconfig which allows us to configure board specific frequency on boot Signed-off-by: Iain Paton <ipaton0@gmail.com> [hdegoede@redhat.com s/CONFIG_SYS_CLK_FREQ/CONFIG_TIMER_CLK_FREQ/ for the arch-timer clk speed on sun7i to fix mis-compile on sun7i] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | powerpc: ppc4xx: convert AMCC boards to generic boardAnatolij Gustschin2015-03-28-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add CONFIG_SYS_GENERIC_BOARD to amcc-common.h and CONFIG_DISPLAY_BOARDINFO to Kconfig files. canyonlands.h includes amcc-common.h, so remove CONFIG_SYS_GENERIC_BOARD definition there. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Feng Kan <fkan@amcc.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tom Rini <trini@konsulko.com>
* | | m68k: fix 3 broken boardsangelo@sysam.it2015-03-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix eb_cpu5282 and eb_cpu5282_internal unresolved external error. These boards have video but don't need any ppc related video_setmem(). Fix M53017EVB moving away embedded env to a different offset, as in M52277EVB. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
* | | vexpress64: cut config and defaults for unclear variantLinus Walleij2015-03-28-24/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | This variant that is neither FVP / Base Model or Juno Versatile Express 64bit is confusing. Get rid of it unless someone can point out what machine that really is. Seems to be an evolutional artifact in the config base. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | vexpress64: remove board late init, use smhloadLinus Walleij2015-03-28-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the kludgy late board init from the FVP simulator version of Versatile Express 64bit (ARMv8), and replace it with a default boot command using the new smhload command to load the files using semihosting. Tested on the Foundation Model. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | config: Define BOOTP client architecture and VCI for ARMv8Thierry Reding2015-03-28-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Reuse the 32-bit ARM client architecture and identify ARMv8 specifically by setting the BOOTP VCI string. Cc: Dennis Gilmore <dennis@ausil.us> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* | | config: Use booti instead of bootz on 64-bit ARMThierry Reding2015-03-28-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bootz command doesn't work with Linux kernel images on 64-bit ARM. The replacement command with the same interface and functionality is booti. Cc: Dennis Gilmore <dennis@ausil.us> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* | | ARM: omap4_panda: enable saveenv commandmaxin.john@enea.com2015-03-28-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable saveenv command and the configs to store environment persistently in the SD card. Tested on OMAP4 Panda (OMAP4460 ES1.1) Signed-off-by: Maxin B. John <maxin.john@enea.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | m68k: mcf547x_8x: move CPU type to Kconfig and refactor config.mkMasahiro Yamada2015-03-28-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the CPU type config options from include/configs/*.h to arch/m68k/Kconfig and refactor the CPU flags select in arch/m68k/cpu/mcf547x_8x/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Angelo Dureghello <angelo@sysam.it>
* | | m68k: mcf523x: move CPU type to Kconfig and refactor config.mkMasahiro Yamada2015-03-28-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the CPU type config options from include/configs/M5235EVB.h to arch/m68k/Kconfig and refactor the CPU flags select in arch/m68k/cpu/mcf523x/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Angelo Dureghello <angelo@sysam.it>
* | | m68k: mcf5227x: move CPU type to Kconfig and refactor config.mkMasahiro Yamada2015-03-28-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the CPU type config options from include/configs/M52277EVB.h to arch/m68k/Kconfig and refactor the CPU flags select in arch/m68k/cpu/mcf5227x/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Angelo Dureghello <angelo@sysam.it>
* | | m68k: mcf5445x: move CPU type to Kconfig and refactor config.mkMasahiro Yamada2015-03-28-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit intends to stop grepping CPU type in arch/m68k/cpu/mcf5445x/config.mk. Move the CPU type config options from include/configs/*.h to arch/m68k/Kconfig and refactor the CPU flags select in arch/m68k/cpu/mcf5445x/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Angelo Dureghello <angelo@sysam.it>
* | | m68k: mcf532x: move CPU type to Kconfig and refactor config.mkMasahiro Yamada2015-03-28-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit intends to stop grepping CPU type in arch/m68k/cpu/mcf532x/config.mk. Move the CPU type config options from include/configs/*.h to arch/m68k/Kconfig and refactor the CPU flags select in arch/m68k/cpu/mcf532x/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Angelo Dureghello <angelo@sysam.it>
* | | m68k: mcf530x: move CPU type to Kconfig and refactor config.mkMasahiro Yamada2015-03-28-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit intends to stop grepping CPU type in arch/m68k/cpu/mcf530x/config.mk. Move the CPU type config options from include/configs/amcore.h to arch/m68k/Kconfig and refactor the CPU flags select in arch/m68k/cpu/mcf530x/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Angelo Dureghello <angelo@sysam.it>
* | | m68k: mcf52x2: move CPU type to Kconfig and refactor config.mkMasahiro Yamada2015-03-28-31/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit intends to stop grepping CPU type in arch/m68k/cpu/mcf52x2/config.mk. Move the CPU type config options from include/configs/*.h to arch/m68k/Kconfig and refactor the CPU flags select in arch/m68k/cpu/mcf52x2/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Angelo Dureghello <angelo@sysam.it>
generated by cgit v1.1 at 2024-11-18 15:54:39 +0000