summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* armv7: Add support for ST-Ericsson U8500 href platformJohn Rigby2011-06-01-0/+245
| | | | | | | | | | Minimal platform support to boot linux from SD. Supported devices/hw limited to external MMC/SD slot, GPIO, I2C and minimal PRCMU. Signed-off-by: John Rigby <john.rigby@linaro.org> CC: Albert Aribaud <albert.aribaud@free.fr>
* Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPTAlbert ARIBAUD2011-05-31-4/+0
|
* arm/km: update mgcoge3un board supportHolger Brunck2011-05-31-0/+25
| | | | | | | | | | | | | | | | | | | | | | | We change default settings for egiga on mgcoge3un. The reason we need this is that we have the gig port on mgcoge3un connected using a back-to-back pair of PHYs. There are no magnetics and because of that the port has to be run with a fixd configuration and auto-negotiation must be disabled. In the default mode the egiga driver uses autoneg to determine port speed - which defaults to 1G (we need 100M full duplex). Add wait for the GPIO line connected to mgcoge3ne before starting mgcoge3un. A board specific ethernet present function was added, because on this board ethernet is always present. The BOCO FPGA access was enhanced and changed to use register definitions. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
* arm/km: rename mgcoge2un to mgcoge3unValentin Longchamp2011-05-31-6/+9
| | | | | | | | | | | | | | | | | | The mgcoge2un target was only an intermediate step to mgcoge3un. For this reason the mgcoge2un support was moved to mgcoge3un, because it isn't needed to support both targets. We add the BootROM init file for the mgcoge3un memphis RAM. We also move the suen3 and suen8 boards into the correct category in the MAINTAINERS file. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
* arm/km: add second serial interface for kirkwoodHolger Brunck2011-05-31-0/+6
| | | | | | | | | Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
* arm/km: disable ls (through jffs2 support)Valentin Longchamp2011-05-31-0/+1
| | | | | | | | | | | | | | | This is not supported on our km-arm boards since we have defined CONFIG_SYS_NO_FLASH for our NAND Flash chip. With CONFIG_CMD_JFFS2, the ls command is present and works very badly on our km-arm boards. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de>
* arm/km: introduce bootcount env variable and clean km_armValentin Longchamp2011-05-31-0/+3
| | | | | | | | | | | | | | | | | | This environment variable is used to set the bootcount address for the kernel. last_stage_init is not available for arm platforms. So the calls to set_km_var and set_bootcount_addr are done in misc_init_r. Additionally some unneeded printouts were removed. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
* arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm fileValentin Longchamp2011-05-31-45/+15
| | | | | | | | | | | | Since all the boards define the same env settings, this simplifies the board files. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
* arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.hValentin Longchamp2011-05-31-9/+0
| | | | | | | | | | | | | This define is marvell specific, so it should be present in km_arm. It is however not needed there either, since we set it to the default value that is already set in include/asm/arch-kirkwood/config.h Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de>
* ARMV7: Add support for Samsung SMDKV310 BoardChander Kashyap2011-05-26-0/+169
| | | | | | | | | SMDKV310 board is based on Samsung S5PV310 SOC. This SOC is very much similar to S5PC210. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* SMDK2410: various cleanup/code style fixesDavid Müller (ELSOFT AG)2011-05-26-44/+101
| | | | | Signed-off-by: David Müller <d.mueller@elsoft.ch> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* SMDK2410: use the CFI driver (and remove the old one)David Müller (ELSOFT AG)2011-05-26-20/+12
| | | | | Signed-off-by: David Müller <d.mueller@elsoft.ch> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* SMDK2410: remove unneeded config.mkDavid Müller (ELSOFT AG)2011-05-26-0/+2
| | | | | Signed-off-by: David Müller <d.mueller@elsoft.ch> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* SMDK2410: activate ARM relocation featureDavid Müller (ELSOFT AG)2011-05-26-0/+6
| | | | | Signed-off-by: David Müller <d.mueller@elsoft.ch> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* VCMA9: use ARM relocation feature to fix build errorDavid Müller (ELSOFT AG)2011-05-23-0/+5
| | | | Signed-off-by: David Müller <d.mueller@elsoft.ch>
* MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.Fabio Estevam2011-05-23-2/+0
| | | | | | | | commit ed59e58 (Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ) made the definition of CONFIG_SYS_BOOTMAPSZ unnecessary. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jason Liu <jason.hui@linaro.org>
* MX51: vision2: Fix build for vision2 board.Fabio Estevam2011-05-23-0/+1
| | | | | | | | | config.mk should not be used in board directory and should be removed. Use the same approach for building the image as other MX51/MX53 boards. After this change vision2 board can be built again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* MX53: Add initial support for MX53SMD board.Fabio Estevam2011-05-23-0/+192
| | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* MX53: support for freescale MX53LOCO boardJason Liu2011-05-23-0/+186
| | | | | | | This patch add initial support for freescale MX53LOCO board. Network(FEC),SD/MMC,UART have been supported by this patch Signed-off-by: Jason Liu <jason.hui@linaro.org>
* mx5: Fix CONFIG_OF_LIBFDT redefined warningShawn Guo2011-05-23-4/+0
| | | | | | | | | | | | With the following commit, CONFIG_OF_LIBFDT is redefined. 2fa8ca98c37d5b1bb0328b19ddb7e9d162cd9683 Add CONFIG_OF_LIBFDT to more boards. Remove the duplicated definition to fix CONFIG_OF_LIBFDT redefined warning. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definitionShawn Guo2011-05-23-2/+0
| | | | | | | | | | Since the following commit, definition CONFIG_SYS_BOOTMAPSZ is not needed any more. ed59e58786cae9f8afcb575649afc65985beed4d Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* mx31pdk: Clean up mx31pdk.h fileFabio Estevam2011-05-23-16/+16
| | | | | | No need to use '#define SYMBOL 1' to make it active. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* Minor coding style cleanup.Wolfgang Denk2011-05-19-3/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* TFTP: add tftpsrv commandLuca Ceresoli2011-05-19-1/+2
| | | | | | Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2011-05-19-8/+32
|\ | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mpc85xx: powerpc/85xx: add support for env in MMC/SPI on corenet ds boards powerpc/85xx: Enable eSPI support on corenet ds boards
| * powerpc/85xx: add support for env in MMC/SPI on corenet ds boardsShaohui Xie2011-05-18-8/+22
| | | | | | | | | | Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Enable eSPI support on corenet ds boardsShaohui Xie2011-05-18-0/+10
| | | | | | | | | | Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | km/common: add pnvramsize to default environmentHolger Brunck2011-05-18-0/+1
| | | | | | | | | | | | | | | | | | | | | | The pnvram size was used later from start scripts in linux. Therefore it was added to the default environment. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de>
* | km/common: simplify default environmentHolger Brunck2011-05-18-126/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a first step to simplify the default environment. Move all the environment variables which are only needed for debugging purpose to textfiles in the scripts directory. In case of debugging these files can be loaded via tftp into RAM and set via the env import command. Other variables are identified as obsolete and were removed. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de>
* | km/common: implement boardId HWkey checks as u-boot cmdThomas Herzmann2011-05-18-29/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BoardId and HWKey are used to identify the HW class of a given board. The correct values are stored in the inventory eeprom. During creation time of a boot package the boardId and HWkey for the SW is stored in the default environment and burned into the flash. During boottime the values in the inventory and in the environment are compared to avoid starting of a SW which is not authorized for this board. Some bootpackages are allowed to run on a set of different boardId hwKey. In this case the environment variable boardIdListHex was added to the default environment. In this case the command iterates over the pair values and compares them with the values read from the inventory eeprom. The syntax of such a boardIdListHex value is e.g.: 158_1 159_1 159_2 Signed-off-by: Thomas Herzmann <thomas.herzmann@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de>
* | mmc: enable partition switch function for emmcLei Wen2011-05-18-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For emmc, it may have up to 7 partitions: two boot partitions, one user partition, one RPMB partition and four general purpose partitions. (Refer to JESD84-A44.pdf/page 154) As bootloader may need to read out or reflashing images on those different partitions, it is better to enable the partition switch with console command support. Also for partition would be restore to user partition(part 0) when CMD0 is used, so change mmc_init routine to perform normal initialization only once for each slot, unless use the rescan command to force init again. Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Andy Fleming <afleming@freescale.com>
* | cmd_mmc: eliminate device num in the mmc commandLei Wen2011-05-18-0/+1
| | | | | | | | | | | | | | mmc command applied device, like ide and usb... Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Andy Fleming <afleming@freescale.com>
* | mmc_spi: generate response for send status commandThomas Chou2011-05-18-0/+1
|/ | | | | | | | | | A "send status" command is added with the commit "mmc: checking status after commands with R1b response". But the status register returned from send status command of SPI protocol is different from that of MMC/SD protocol. We do a simple test and generate a response in stead of full bit-by-bit translation. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* at91: reworked support for otc570 boardDaniel Gorsulowski2011-05-18-115/+150
| | | | | | | The otc570 board support was broken. Within this opportunity, I completely reworked the board files. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
* hammerhead: move CONFIG_SYS_TEXT_BASE to headerAndreas Bießmann2011-05-18-0/+1
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* mimc200: move CONFIG_SYS_TEXT_BASE to headerAndreas Bießmann2011-05-18-0/+1
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to headerAndreas Bießmann2011-05-18-0/+1
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* atstk100x: move CONFIG_SYS_TEXT_BASE to headerAndreas Bießmann2011-05-18-0/+4
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* atngw100: move CONFIG_SYS_TEXT_BASE to headerAndreas Bießmann2011-05-18-0/+1
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* mimc200: fix "#define XXXX 1"Andreas Bießmann2011-05-18-28/+28
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* hammerhead: fix "#define XXXX 1"Andreas Bießmann2011-05-18-24/+24
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* favr-32-ezkit: fix "#define XXXX 1"Andreas Bießmann2011-05-18-23/+23
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* atstk1006: fix "#define XXXX 1"Andreas Bießmann2011-05-18-24/+24
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* atstk1004: fix "#define XXXX 1"Andreas Bießmann2011-05-18-21/+21
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* atstk1003: fix "#define XXXX 1"Andreas Bießmann2011-05-18-21/+21
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* atstk1002: fix "#define XXXX 1"Andreas Bießmann2011-05-18-24/+24
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* atngw100: fix "#define XXXX 1"Andreas Bießmann2011-05-18-27/+27
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* ATMEL: fix dataflash (dirty) this file should be converted to struct SoC accessReinhard Meyer2011-05-18-1/+0
| | | | Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
* avr32: fixup definitions to ATMEL_BASE_xxxAndreas Bießmann2011-05-18-24/+17
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
* avr32: rename memory-map.h -> hardware.hAndreas Bießmann2011-05-18-7/+7
| | | | Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
generated by cgit v1.1 at 2024-11-07 11:50:57 +0000