| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Debug monitor will print out last failed AXI access info when
system reboot is caused by AXI access failure, only works when
debug monitor is enabled.
Enable this module on i.MX6SX.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit df6ac8531d498021ed379c74fc1847bd2cec7179)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit 4f4ecdbf6fe2673b8ad117df1a4974bdb7e6aa4a)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ARM errata 751472, 794072, 761320, 845369 only applied
to the following configuration:
This erratum affects configurations with either:
- One processor if the ACP is present
- Two or more processors
i.MX6 family does not have the ACP and thus only the MPCore system
will be impacted, which are the i.MX6DQ, i.MX6DL, and i.MX6QP.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Jason Liu <r64343@freescale.com>
(cherry picked from commit 0db960784ba4f631ee5c0321b5d25f3b1ac55640)
(cherry picked from commit 850f27d137a083a141c99fe9828d596807937d38)
|
|
|
|
|
|
|
|
|
| |
Use syscounter for i.MX6UL platform as default timer, not use GPT.
Add a CONFIG_GPT_TIMER for selecting GPT. Using CONFIG_SYSCOUNTER_TIMER
for selecting system counter.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 1c27c9ecf80b3cc63a7c9751ebfd11755f847b1d)
|
|
|
|
|
|
|
| |
Add configurations and board codes for second enet.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 4dfd06dc649615f8dd3e1ac8018a0a7109fc4147)
|
|
|
|
|
|
|
| |
Add configurations and board codes for second enet.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit b646262f1f201e11e08968ddf88aeb8ab41fcf21)
|
|
|
|
|
|
|
|
|
| |
Enable the GIS feature for i.MX6SX sabreauto board. Need to define
the "gis=vadc" environment variable for the gis input. At default
this variable is not set.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 2271dcfee3500e96503a9fc59929e73167e3c4a2)
|
|
|
|
|
|
|
|
|
|
|
| |
Add gis module, current gis is support vadc input.
Add power down function to lcdif driver.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793)
(cherry picked from commit a31dcdafb0963381e7213c59f79a340ef27ec2e2)
(cherry picked from commit 02dfe2e4af5f51d39a51542fb0e81f93faf505bc)
|
|
|
|
|
|
|
| |
Add LCD configurations and TFT43AB display settings for mx6sllevk.
Enable the CONFIG_VIDEO for this feature.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Add LCD configurations and MCIMX28LCD display settings for mx6sllevk.
Enable the CONFIG_VIDEO for this feature.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Change to panel environment for display at default. Align this feature to
v2015.04 uboot.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit ea93a34a3348f80462ea5b61a4ca2e9a1d267f4c)
|
|
|
|
|
|
|
|
| |
Support two display panels, one for LVDS, another for parallel LCD. Align
the feature to v2015.04 uboot.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit d5f7833adf6236357cf3c139e14e46d718e20524)
|
|
|
|
|
|
|
|
| |
Support two display panels, one for LVDS, another for parallel LCD. Align the
feature to the v2015.04 uboot.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit d7f54f22607ffcace6cda97984649a5ae4f65996)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a new interface "mxs_lcd_panel_setup" to setup fb parameters and
specifies the LCDIF controller for multiple controllers of iMX6SX.
Pass fb parameters via "videomode" env remains work if the new interface
is not called before video initialization.
Modify LCDIF clock interface "mxs_set_lcdclk" to support multiple
LCDIF controllers on iMX6SX.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit d7f49b9378547c3a57b96bcdb907fc44616beb3d)
(cherry picked from commit e1343191b9de227c582847e7eeb5ce9238be0754)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6slevk.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 3308f3c48c644938c415ead23ed9acedc2fd7981)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6sxsabresd.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit ebb43ae292d43817202b71b25368516887f4686b)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6sxsabresd.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit fb53c90269ead4f72028fd9bcc764e4924921a30)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6sabresd and mx6qsabreauto.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 14040e07549a394500c11e815f31299e4fb0ac50)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6qarm2.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 54ea563dbe1804e426afbbf0710ffa815551d92b)
|
|
|
|
|
|
|
|
|
| |
Support epdc for mx6dlsabresd board.
Introduce a new configuration file mx6dlsabresd_epdc_defconfig.
Add related settings.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 467974ffda4b874e16f0c84974c3d65d85f84f6a)
|
|
|
|
|
|
|
|
|
| |
Support epdc for mx6slevk board.
Introduce a new configuration file mx6slevk_epdc_defconfig.
Add related settings.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 8e4304c2ab95928fb6fbb24ba83115cf1cd1e6d2)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support EPDC.
E-Ink feature is supported by i.MX6DL/SL and i.MX7D.
For now this driver only supports i.MX6DL/SL, because the
i.MX7D EPDC driver needs pxp support which is not included
in U-Boot.
Support user defined logo file, if there is no logo file, it will
draw a black border around a white screen.
If need to enable EPDC, a waveform file is required to let all
work.
Since we need LCD_MONOCHROME mode for EPDC, we introduce LCD_MONOCHROME
support.
Please refer to Linux Reference Manual for how to flash WAVEFORM file.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Robby Cai <R63905@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit a7244f279cc3c3994bcd103f5e9a183b1075ae71)
|
|
|
|
|
|
|
| |
Add comments for enabling BEE.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit e5cc58b71e28b2bb3c66fbe8af373cff31eb3017)
|
|
|
|
|
|
|
|
|
| |
Since the UART1 register base name is changed from UART1_IPS_BASE_ADDR
to UART1_BASE to align with other i.MX6 chips. Should update the board
configuration header file with the new name.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 18019b8f4b65d3261db6488e416eae66a6500316)
|
|
|
|
|
|
|
|
|
|
| |
vs18_enable parameter
Change to use the new way to set the vs18_enable field to 1 for fixed 1.8v I/O eMMC.
Don't use CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT any longer.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit c1bf2d975be66597f8fc25c9eef0f02bda3c5050)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When using eMMC with 1.8V I/O, we have to set the VSELECT bit at this USDHC controller
setup and init. The CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT has problem that it will
apply to all USDHC controllers and it only set the 1.8V at init phase. So if user does not
select to the eMMC device, the voltage on the I/O pins are not correct.
This patch adds a parameter "vs18_enable" in fsl_esdhc_cfg structure and priv data, so each controller
can have different settings. The default value is 0 for 3.3V, which is compatible with current
codes. When setting this value to 1, at USDHC setup and init phase the driver will set the
VSELECT bit.
For DM driver, the vqmmc-supply property will be searched for current usdhc node. If the vqmmc-supply is
set to 1800000 uV, the vs18_enable in priv data will be set to 1.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit ebd872f491af27c38a0698d226222ea5093c563c)
|
|
|
|
|
|
|
|
|
| |
Modify and remove configurations conflicts with DM drivers from head file.
Enable DM drivers and OF_CONTROL in defconfig.
Also update the GPIO usage to call gpio_request before any gpio using, and
update power_init_board since the PMIC APIs are changed in Pfuze DM driver.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
| |
Get the latest dtsi files and clock.h for imx6qdl from kernel
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
| |
This moves all of the current ARM errata from various header files and in to
Kconfig. This allows for a minor amount of cleanup as we had some instances
where both a general common header file was enabling errata as well as the
board config. We now just select these once at the higher level in Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In some cases this is absolutely required, so select this for some secure
features. This also requires migration of RSA_FREESCALE_EXP
Cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Cc: Naveen Burmi <NaveenBurmi@freescale.com>
Cc: Po Liu <po.liu@freescale.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Priyanka Jain <Priyanka.Jain@freescale.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Feng Li <feng.li_2@nxp.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Mingkai Hu <Mingkai.Hu@freescale.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Saksham Jain <saksham.jain@nxp.freescale.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|\ |
|
| |
| |
| |
| | |
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
|
| |
| |
| |
| |
| |
| |
| | |
need to add before div in mmc update scripts. Otherwise we could
write one block more ba acident
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
|
| |
| |
| |
| | |
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
|
| |
| |
| |
| |
| |
| | |
there was a double bracketed var ref. fix this.
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
|
| |
| |
| |
| |
| |
| |
| | |
Playing with USB-to-Ethernet dongles it turns out,
that these will not work with special settings
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
|
| |
| |
| |
| |
| |
| |
| |
| | |
depending on the use case different CMA sizes are
needed for linux. Add env var to enable passing CMA size
via kernel command line
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
|
| |
| |
| |
| |
| |
| |
| |
| | |
The fdt_addr and ramdisk_addr_r are currently both defined to
0x83000000 and that's not going to work well for anyone. Move
the ramdisk_addr_r to 0x84000000.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
|
| |
| |
| |
| |
| |
| |
| |
| | |
Standard boot processes including distro boot generally expect the
default console to be defined.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
For the memory footprint reason, the Boot ROM can not load the ARM
Trusted Firmware BL1 directly when Trusted Board Boot is enabled.
The second stage loader is Socionext's own firmware, so rename it
for clarification.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|/
|
|
|
|
| |
This is no longer used anywhere.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Added SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and
SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig.
Due to SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION being moved to
Kconfig the board defconfigs for db-88f6820-gp_defconfig
kc1_defconfig and sniper_defconfig need to be updated.
Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the socfpga bootrom supports mmc booting from either a raw image
starting at 0x0, or from a partition of type 0xa2. This patch
adds support for locating the boot image in the first type 0xa2
partition found.
Assigned a partition number of -1 will cause a search for a
partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
and use it to find the u-boot image
Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
|
|\
| |
| |
| |
| |
| |
| |
| | |
Xilinx fixes for v2017.03
- defconfig alignment
- Topic.nl board updates
- Minor microblaze comment fix
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The kernel partition in QSPI is 0x440000 large, not 0x400000. Fix this
in the environment, otherwise the kernel will fail to boot if it occupies
more space.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
not completed. Finish this work by the tool.
During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
make the code more readable. Besides, negative meaning symbols do
not fit in obj-$(CONFIG_...) style Makefiles.
This commit was created as follows:
[1] Edit "default n" to "default y" in the config entry in
common/Kconfig.
[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"
[3] Rename the instances in defconfigs by the following:
find . -path './configs/*_defconfig' | xargs sed -i \
-e '/CONFIG_SYS_NO_FLASH=y/d' \
-e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'
[4] Change the conditionals by the following:
find . -name '*.[ch]' | xargs sed -i \
-e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
-e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
-e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
-e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'
[5] Modify the following manually
- Rename the rest of instances
- Remove the description from README
- Create the new Kconfig entry in drivers/mtd/Kconfig
- Remove the old Kconfig entry from common/Kconfig
- Remove the garbage comments from include/configs/*.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|\ \
| |/
|/| |
|
| |
| |
| |
| |
| |
| |
| |
| | |
Miniarm is the internal project code. Now it is officially named Tinker board.
So rename it.
Signed-off-by: Eddie Cai <eddie.cai@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
| |
| |
| |
| |
| |
| |
| | |
Keep it same with other boards otherwise i have to write special script for it..
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
| |
| |
| |
| |
| |
| |
| | |
To reduce redundant code.
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|\ \
| |/
|/| |
|